Sansui Flat Panel Television SLEDVD249 User Guide

OWNER’S MANUAL  
GUIDE D’UTILISATION  
24” CLASS LED-LCD HDTV WITH DVD PLAYER  
LED-LCD HDTV CATÉGORIE 24 PO ET LECTEUR DVD  
SLEDVD249  
ATTENTION  
ATTENTION  
If you purchase a universal remote control from your local retailer, please contact the remote manufacturer for the  
required programming code.  
Si vous utilisez avec cet appareil une télécommande universelle (autre que celle vendue avec ce téléviseur),  
consultez la documentation accompagnant la télécommande universelle afin de connaître le code numérique cor-  
respondant au téléviseur.  
AIR/CABLE MODE SELECTION  
SÉLECTION DU MODE AIR/CABLE  
When shipped from the factory, the Signal Type option is set to the “Cable” (Cable Television) mode.  
If not using Cable TV, set this menu option to the “Air” position.  
Lorsque l’appareil sort de l’usine, l’option Signal Type est en mode « Cable » (câblodistribution). Si vous  
n’utilisez pas la câblodistribution, sélectionnez l’option « Air ».  
IF CONTACT WITH CUSTOMER SERVICE IS REQUIRED  
PLEASE HAVE THE MODEL NUMBER READY PRIOR TO THE CALL  
SI VOUS DEVEZ COMMUNIQUER AVEC LE SERVICE CLIENTÈLE, PRENEZ NOTE  
DU NUMÉRO DE MODÈLE AVANT D’APPELER.  
CUSTOMER SERVICE – 1-800-289-0980  
SERVICE/SERVICE CLIENTÈLE: 1-800-289-0980  
ORION WEBSITE  
SITE WEB ORION  
FOR INFORMATION ON OUR OTHER PRODUCTS, TO ORDER ACCESSORIES ONLINE,  
OR FOR RECYCLING INFORMATION, PLEASEVISIT OUR WEBSITE AT  
POUR OBTENIR DES INFORMATIONS SUR NOS AUTRES PRODUITS, POUR COMMANDER DES ACCESSOIRES,  
OU LE RECYCLAGE, VEUILLEZVISITER NOTRE SITE WEB:  
Before operating the unit, please read this manual thoroughly.  
Avant de faire fonctionner l’appareil, veuillez lire le présent guide attentivement.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
IMPORTANT SAFETY INSTRUCTIONS  
15) Apparatus should not be exposed to dripping or splashing, and objects filled with liquids, such  
as vases, should not be placed on the apparatus.  
16) An outside antenna system should not be located in the vicinity of overhead power lines or  
other electric light or power circuits, or where it can fall into such power lines or circuits. When  
installing an outside antenna system, extreme care should be taken to keep from touching such  
power lines or circuits, as contact with them might be fatal.  
17) Do not overload wall outlets and extension cords, as this can result in a risk of fire or electric  
shock.  
18) Do not push objects through any openings in this unit, as they may touch dangerous voltage  
points or short out parts that could result in fire or electric shock. Never spill or spray any type of  
liquid into the unit.  
EXAMPLE OF ANTENNA GROUNDING AS PER THE  
NATIONAL ELECTRICAL CODE  
19) If an outside antenna or cable system is  
ANTENNA  
LEAD IN WIRE  
connected to the unit, be sure the antenna or  
cable system is grounded to provide some  
protection against voltage surges and built-up  
static charges, Section 810 of the National  
Electrical Code, ANSI/NFPA 70, provides  
information with respect to proper grounding of  
the mast and supporting structure, grounding  
of the lead-in wire to an antenna discharge  
unit, size of grounding conductors, location  
of antenna discharge unit, connection to  
GROUND  
CLAMP  
ANTENNA  
DISCHARGE UNIT  
(NEC SECTION 810-20)  
GROUNDING CONDUCTORS  
(NEC SECTION 810-21)  
ELECTRIC SERVICE  
EQUIPMENT  
GROUND CLAMPS  
NEC-NATIONAL  
POWER SERVICE GROUNDING  
ELECTRODE SYSTEM  
(NEC ART 250, PART H)  
ELECTRICAL CODE  
S2898A  
grounding electrodes, and requirements for the grounding electrode.  
20) When replacement parts are required, be sure the service technician uses replacement parts  
specified by the manufacturer or those that have the same characteristics as the original part.  
Unauthorized substitutions may result in fire, electric shock or other hazards.  
21) Upon completion of any service or repairs to this unit, ask the service technician to perform  
safety checks to determine that the unit is in proper operating condition.  
22) Keep your fingers clear of the disc slot as it is closing. It may cause injury.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3 EN  
IMPORTANT SAFETY INSTRUCTIONS  
23) When you connect the product to other equipment, turn off the power and unplug all of the equipment from  
the wall outlet. Failure to do so may cause an electric shock and serious personal injury. Read the owner's  
manual of the other equipment carefully and follow the instructions when making any connections.  
24) Reduce the volume to the minimum level before you turn on the product. Otherwise, sudden high volume  
sound may cause hearing or speaker damage.  
25) Do not allow the product to output distorted sound for an extended period of time. It may cause speaker  
overheating and fire.  
26) When you use the headphones, keep the volume at a moderate level. If you use the headphones  
continuously with high volume sound, it may cause hearing damage.  
27) Do not look into the opening of the disc slot or ventilation opening of the product to see the source of the  
laser beam. It may cause eye damage.  
28) Do not use a cracked, deformed, or repaired disc. These discs are easily broken and may cause serious  
personal injury and product malfunction.  
29) This reminder is provided to call the cable TV system installer’s attention to Article 820-40 of the NEC  
that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be  
connected to the grounding system of the building, as close to the point of cable entry as practical.  
30) The socket-outlet must be installed near the unit and easily accessible.  
CONDENSATION  
Moisture will form in the operating section of the player if the player is brought from cool surroundings into a warm  
room or if the temperature of the room rises suddenly.When this happens, player's performance will be impaired.  
To prevent this, let the player stand in its new surroundings for about an hour before switching it on, or make sure  
that the room temperature rises gradually.  
Condensation may also form during the summer if the player is exposed to the breeze from an air conditioner. In  
such cases, change the location of the player.  
HOW TO HANDLE THE LCD PANEL  
• Do not press hard or jolt the LCD panel. It may cause the LCD panel glass to break and injury may occur.  
• If the LCD panel is broken, make absolutely sure that you do not touch the liquid in the panel. This may cause  
skin inflammation.  
If the liquid gets in your mouth, immediately gargle and consult with your doctor. Also, if the liquid gets in your  
eyes or touches your skin, consult with your doctor after rinsing for at least 15 minutes or longer in clean water.  
CHILD SAFETY:  
It Makes A Difference How and Where You Use Your Flat Panel Display  
Congratulations on your purchase! As you enjoy your new product, please keep these safety tips in mind:  
THE ISSUE  
The home theater entertainment experience is a growing trend and larger flat panel displays are popular  
purchases. However, flat panel displays are not always supported on the proper stands or installed  
according to the manufacturer’s recommendations.  
Flat panel displays that are inappropriately situated on dressers, bookcases, shelves, desks, speakers,  
chests or carts may fall over and cause injury.  
THIS MANUFACTURER CARES!  
The consumer electronics industry is committed to making home entertainment enjoyable and safe.  
TUNE INTO SAFETY  
One size does NOT fit all. Follow the manufacturer’s recommendations for the safe installation and use of  
your flat panel display.  
Carefully read and understand all enclosed instructions for proper use of this product.  
Don’t allow children to climb on or play with furniture and television sets.  
Don’t place flat panel displays on furniture that can easily be used as steps, such as a chest of drawers.  
Remember that children can become excited while watching a program, especially on a “larger than life” flat  
panel display. Care should be taken to place or install the display where it cannot be pushed, pulled over, or  
knocked down.  
Care should be taken to route all cords and cables connected to the flat panel display so that they cannot be  
pulled or grabbed by curious children.  
WALL MOUNTING: IF YOU DECIDE TO WALL MOUNT YOUR FLAT PANEL DISPLAY, ALWAYS:  
Use a mount that has been recommended by the display manufacturer and/or listed by an independent  
laboratory (such as UL, CSA, ETL).  
Follow all instructions supplied by the display and wall mount manufacturers.  
If you have any doubts about your ability to safely install your flat panel display, contact your retailer about  
professional installation.  
Make sure that the wall where you are mounting the display is appropriate to support the weight of the unit/  
product and wall mount. If you are unsure, contact a professional installer.  
A minimum of two people are required for installation. Flat panel displays can be heavy.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN 4  
SAFETY PRECAUTIONS  
The unit emits heat when in operation. Do not place any covers or blankets on the unit, this may cause  
overheating. Do not block ventilation holes, or set up near radiators. Do not place in direct sunshine. When  
placing on a shelf leave 4 inches (10 cm) free space around the entire unit.  
4 inches  
4 inches  
Notes when mounting the LCD TV/DVD on a wall  
• If the unit is to be mounted on the wall, contact the retailer where you purchased the LCD TV/DVD for advice,  
and have the equipment professionally installed. Incomplete or improper installation may cause injury to you,  
and/or damage to the LCD TV/DVD.  
To hang the television on a wall, remove these screws and then remove a stand. Before performing work  
spread cushioning over the base area to lay the TV on.  
• Before wall-mounting, please check carefully the location of the TV’s mounting-holes.  
IMPORTANT NOTICE  
Possible Adverse Effects on LCD Panel: If a fixed (non-moving) pattern remains on the LCD Panel for  
long periods of time, the image can become permanently engrained in the LCD Panel and cause subtle but  
permanent ghost images. This type of damage is NOT COVERED BY YOUR WARRANTY. Never leave your  
LCD Panel on for long periods of time while it is displaying the following formats or images:  
• Fixed Images, such as stock tickers, video game patterns, TV station logos, and websites.  
• Special Formats that do not use the entire screen. For example, viewing letterbox style (16:9) media on  
a normal (4:3) display (black bars at top and bottom of screen); or viewing normal style (4:3) media on a  
widescreen (16:9) display (black bars on left and right sides of screen).  
The following symptoms are not signs of malfunction but technical limitation. Therefore we disclaim  
any responsibility for these symptoms.  
• LCD Panels are manufactured using an extremely high level of precision technology, however sometimes  
parts of the screen may be missing picture elements or have luminous spots.This is not a sign of a malfunction.  
• Do not install the LCD Panel near electronic equipment that produces electromagnetic waves. Some  
equipment placed too near this unit may cause interference.  
• Effect on infrared devices – There may be interference while using infrared devices such as infrared cordless  
headphones.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5 EN  
How to attach the stand  
NOTE:  
• Unplug the AC cord from the wall outlet.  
• Before beginning this process, assure that the TV is laid on a clean, safe, and cushioned surface to avoid any  
damage to the unit.  
• Do not touch or press the TV-screen, glass might break under pressure.  
Place the TV on its front onto a table.  
Align the stand’s bottom-plate (supplied) as seen here.  
It will fit in only one direction.  
Hold the unit and attach the stand frame slowly, as shown in figure 1.  
Figure 2  
Figure 1  
Finally secure the bottom-plate with 4 screws (supplied), 4x16mm (3/16 x 5/8 inches) as indicated by the arrows  
in figure 2.  
• Be sure to follow the instructions. Insufficient tightening or incorrect installation of the stand will not support  
your unit correctly, and could result in damage or injury from tip-over.  
How to remove the stand  
When you transport this product, remove the stand and pack flat against the back of the unit in the carton. To  
remove the stand, perform above steps in reverse order.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN 6  
Features  
LCD color TV With DVD/CD player  
Unique space saving design combines a 24” LED-LCD HDTV color TV and a DVD/CD player.  
A DVD disc has much more capacity, but is the same size as an audio CD disc. The Picture/Audio quality of a  
DVD exceeds other software. The picture quality is higher than Super VHS video cassettes. The audio quality  
is higher than an audio CD. The DVD also has special options; audio language selection, subtitle language  
selection, or multi-angle, etc.  
The DVD PLAYER can playback both audio CDs and MP3/WMA/JPEG CDs.  
Compatible with a wide range of DVD audio outputs  
Digital Audio Jack (Coaxial)  
• When a component with a built-in Dolby Digital decoder is connected, Dolby Digital sound can produce the  
effect of being in a movie theater or a concert hall.  
• Surround standard is different from Dolby Digital. This format is already in use in many theaters. By connecting  
this unit to a DTS decoder or an AV amplifier with a built-in DTS decoder, the DTS audio of DVD discs  
recorded in this format can be enjoyed. However, audio will not be output from the analog audio output jacks.  
• By connecting this unit to an AV amplifier with a built-in MPEG decoder, the MPEG audio of DVD discs  
recorded in this format can be enjoyed.  
• The Linear PCM sound of a 48 kHz/24 bit through 96 kHz/24 bit exceeds audio CD sound.  
Convenience Features  
Direct selection of your desired scenes using Title/Chapter/Time/Track - You can playback from the  
desired scene.  
Recalling Up to 12 Scenes - You can program up to 12 scenes in memory and recall the marked scenes.  
Frame Advance - The PAUSE/STILL and SEARCH moves one frame at a time.  
Slow Motion - The SLOW moves you back and forth through the program by 4 steps of 1/16-1/2 times.  
Repeat Playback - You can repeat chapter, track, title, sides or material between two selected points.  
Program Playback (Audio CD/MP3/WMA CD) - You can playback tracks in programmed sequences.  
Zoom - You can zoom in the selected subject on the screen during playback.  
Note: Make sure that discs are suitable for the following functions.  
Multi-Language - Maximum 32 language subtitles and maximum 8 language soundtracks can be played back  
for movies or programs.  
Multi-Angle - Pictures of Sports or a Live Concert are recorded with many cameras. When you play such a disc,  
you can change the angles during playback.  
Parental Control - You can limit the playback of scenes or sounds of DVD discs that have a rating level  
encoded on the disc.  
Video Aspect Ratio - You can change the aspect ratio of the screen for your monitor.  
TV Features  
Integrated Digital Tuner - You can view digital broadcasts without using a Digital TV Set-Top Box.  
Closed Caption Decoder With Full Text Mode - Displays text captions or full screen text on the screen for  
hearing impaired viewers.  
Picture Adjustments Using The Remote Control - The On-Screen display allows precise remote control  
adjustment of BRIGHTNESS, CONTRAST, COLOR, TINT and SHARPNESS.  
Programmable TV Sleep Timer - Operable from the remote control, the TV can be programmed for up to 120  
minutes to turn off automatically.  
On-Screen 3 Languages Display - You can select one of 3 languages, English, French or Spanish for on-  
screen programming.  
V-Chip - The V-Chip function can read the rating of a TV program or movie content if the program is encoded  
with this information. V-Chip will allow you to set a restriction level.  
* This item incorporates copy protection technology that is protected by U.S. patents and other intellectual  
property rights of Rovi Corporation. Reverse engineering and disassembly are prohibited.  
*
is a trademark of DVD Format/Logo Licensing Corporation.  
* Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of  
Dolby Laboratories.  
* The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or  
registered trademarks of HDMI Licensing LLC in the United States and other countries.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7 EN  
Contents  
Before using your unit  
DVD Operation  
DVD Operation................................................23  
Status display of disc ......................................23  
Playback procedure........................................23  
Special playback.............................................24  
Zooming..........................................................24  
Locating desired scene...................................24  
A-B Repeat playback ......................................24  
Marking desired scenes..................................25  
Changing angles.............................................25  
Changing soundtrack language ......................25  
Subtitles..........................................................25  
Using HOME MENU .......................................26  
Play mode.......................................................26  
Audio Settings menu.......................................27  
Video Adjust menu..........................................28  
Quick guide for DVD menu operation..............28  
IMPORTANT SAFETY INSTRUCTIONS...........3  
SAFETY PRECAUTIONS .................................5  
IMPORTANT NOTICE.......................................5  
How to attach the stand ....................................6  
How to remove the stand ..................................6  
Features............................................................7  
Contents ...........................................................8  
Disc...................................................................9  
Parts and functions .........................................11  
Remote control ...............................................12  
Power source..................................................13  
Antenna connections ......................................14  
Cable TV connections.....................................14  
TV operation  
Starting setup .................................................15 Function Setup................................................29  
TV operation ...................................................15 Parental Control ..............................................30  
Quick guide for menu operation......................16  
Additional information  
Convenience functions ...................................17  
Memorizing channels......................................18  
Checking the digital signal strength ................19  
Labeling channels...........................................19  
Labeling video inputs......................................19  
Setting the V-Chip ...........................................20  
Closed Caption...............................................21  
CC advanced..................................................21  
Setting the picture size....................................22  
Language Code List........................................31  
Country/Area Code List ..................................31  
Connections to other equipment.....................32  
Reception disturbances ..................................35  
Problems and troubleshooting ........................36  
Specifications ................................................38  
limited WARRANTY .......................................39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN 8  
Disc  
Playable discs  
CAUTION:  
Disc type and logo mark  
content  
• Only the left types of discs can be played on this  
unit. DVD-ROM (for PC), CD-ROM (for PC), SVCD,  
CVD, VCD, etc. cannot be played.  
Audio  
+
• This unit cannot play an 8 cm disc. It cannot also be  
played even using a disc adapter.  
DVD Video  
Video  
(moving  
pictures)  
• If you insert an irregular shaped disc, it may get  
stuck and cause a malfunction.  
• The use of a ring protector or other disc  
accessories will cause errors.  
CD-DA  
Audio  
• This unit is to be used exclusively with the NTSC  
color system. PAL and SECAM system discs cannot  
be used with this unit.  
The following discs are also available.  
• DVD-ROM/-R/-RW/-R DL discs of DVD video format.  
• CD-ROM/-R/RW discs of MP3/WMA/JPEG.  
• Some discs cannot be played back depending on  
the recording conditions.  
Region Number  
Region number (Regional restriction code) is built-in to the unit and DVD video discs.  
Region number “1” or “ALLof DVD video discs can be used on this unit.  
ALL  
1
Title  
DVD DISC  
When two or more movies are recorded on a disc, the disc  
is divided into two or more sections. Each section is called  
a “TITLE”.  
TITLE 1  
CHAPTER 1  
TITLE 2  
CHAPTER 2  
CHAPTER 2  
CHAPTER 1  
CHAPTER 3  
Chapter  
The titles can be subdivided into many sections.  
Each section is called a “CHAPTER”.  
Audio CD  
Track  
An Audio CD can contain several items.  
These are assigned to the tracks.  
TRACK  
1
TRACK  
2
TRACK  
3
TRACK  
4
TRACK  
5
Removing Disc from Case  
Be sure to hold the edge of disc. Do not touch the surface of the disc.  
Pick up the disc gently from the case.  
• Do not scratch the disc.  
• Do not get dirt on the surface of the disc.  
• Do not stick a label or adhesive tape on the disc.  
• Do not drop or bend the disc.  
Storing Disc  
• Store the disc in the case to avoid risk of scratches, dirt or damage.  
• Do not leave disc exposed to direct sunlight or in hot or humid places.  
Cleaning Disc  
Wipe the disc with a clean, dry cloth from center to edge.  
• Do not wipe the disc in a circular motion.  
• Do not use liquid or aerosol cleaners.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
9 EN  
Disc  
Compatibilities for the PC-created disc  
• You may not be able to play discs recorded  
using a personal computer or recorder for disc  
compatibilities, scratches or marks on the disc, dirty  
lenses of the unit or condensation and so on.  
• Discs recorded using a personal computer may  
not be playable in this unit due to the setting of the  
application software used to create the disc. In  
these particular instances, check with the software  
publisher for more detailed information.  
Windows Media Audio (WMA)  
compatibility  
• WMA is an acronym for Windows Media Audio  
and refers to an audio compression technology  
developed by Microsoft Corporation.  
• You can encode your files by using Windows  
Media Player Ver.7, 7.1, Windows Media Player for  
Windows XP or Windows Media Player 9 Series.  
• When encoding your files, use only applications  
approved by Microsoft Corporation. If you use a  
non-approved application, it may not work properly.  
• This unit is compatible with audio files recorded with  
the following sampling frequency: 32 kHz, 44.1 kHz  
and 48 kHz.  
Playable files  
• ISO 9660 Level 1 or 2 compliant.  
Romeo and Joliet file systems are both compatible  
with this player.  
• It is not compatible with loss-less encoding.  
• Files with extensions .wma or .WMA can be played.  
• DRM (Digital Rights Management) protected files  
will not play in this player.  
For detailed information, please see the instruction  
manuals or help files that came with your PC and/or  
software.  
Playing MP3 (MPEG-1 Audio Layer-3) files  
• This unit is compatible with audio files recorded with  
the following sampling frequency: 32 kHz, 44.1 kHz  
and 48 kHz.  
• File structure (may differ): Up to 299 folders on a  
disc; up to 648 files within each folder.  
• Folder and file names can be displayed as long  
as they are typed in alphabets and numbers. If  
folder and file names are other than alphabets and  
numbers, they may be replaced and displayed like  
as “_”. Garbled characters may also be displayed in  
this case.  
• Files with extensions .mp3 or .MP3 can be played.  
• For the best quality of sound, 128 kbps or higher bit  
rate is recommended.  
Copy Control CD (CCCD)  
This product is designed to conform to CD-DA  
(Compact Disc Digital Audio). Any other discs than  
CD-DA are not guaranteed with their operation and  
performance in this product.  
Playing image files  
JPEG files recorded in DVD-R/-RW/-R DL and CD-R/-RW  
can be played.  
Note on copyright  
• Unauthorized recording of copyrighted television  
programs, films, video cassettes and other materials  
may infringe the rights of copyright owners and be  
contrary to copyright laws.  
JPEG file compatibility  
• Image files should be saved in JPEG format.  
• Files recorded in Fuji Color CD, Kodak Picture CD  
or CD-R/-RW can be played.  
• Compatible formats: Baseline JPEG and EXIF 2.2*  
still image files up to a resolution of 3072 x 2048.  
*File format used by digital still cameras.  
• Files with extensions .jpg or .JPG can be played.  
• Progressive JPEG formatted files do not work.  
• It may take some more time to start to play larger  
files than usual.  
• JPEG files with different aspect ratio may be  
displayed with black bands (either vertical or  
horizontal).  
Playing Audio files  
WMA and MP3 files recoded in DVD-R/-RW/-R DL,  
CD-R/-RW can be played.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN 10  
Parts and functions  
Front  
Right side  
EJECT (0) button  
INPUT/ENTER button  
CH (CHANNEL)  
// PLAY (£) buttons  
VOL (VOLUME) +/–//◀  
buttons, MENU button  
POWER button  
Remote sensor  
Power Indicator  
Red: Standby  
To display the menu screen.  
Press and hold both VOL (VOLUME) +/at the same  
time for 1 second to display the menu screen.  
CH (CHANNEL) buttons, VOL (VOLUME)  
+/buttons and INPUT/ENTER button can be used  
to select the desired setting during the menu screen  
operations.  
ANT. (RF) IN jack  
HEADPHONE jack  
Rear  
COAXIAL OUT jack  
FOR SERVICE PERSONNEL USE ONLY  
Do NOT insert ANY USB device into  
this port. Use of this port by other than  
Service Personnel may void this products  
warranty.  
AUDIO (L/R) IN jacks  
COMPONENT IN  
(Y(VIDEO)/Pb/Pr) jacks  
PC MONITOR IN jack  
HDMI/DVI IN jack  
Download from Www.Somanuals.com. All Manuals Search And Download.  
11 EN  
Remote control  
POWER  
Power On/Off  
DISPLAY/–  
Call TV information  
Call DVD information  
Input “–” for digital channels  
TV/DVD  
(EJECT)  
0-9  
Switch between TV and DVD  
Eject a disc  
Direct channel selection of TV  
Input setting  
Enter a password  
VOL +/–  
MUTE  
SLEEP  
Adjust volume of TV  
Switch off the sound  
Sleep timer  
SETUP/  
DVD mode - Call up initial setup mode  
TV mode - Display menu of TV  
TV MENU  
DVD MENU  
Display DVD menu  
Select channel of TV  
Cursor buttons  
CH  
▲▼◀▶  
/
ENTER  
Enter information in the menu  
EXIT/  
Exit from On-Screen menu  
CANCEL  
Reset information in the menu  
TOP MENU  
SEARCH  
PLAY  
Select title  
Fast Forward/Review playback  
Playback  
SKIP  
SUBTITLE  
STOP  
Skip chapter to forward or reverse direction  
Set subtitle  
Stop  
SLOW  
Forward/Reverse- slow motion  
PAUSE/  
STILL  
Pause CD sound  
Still picture of DVD  
PLAY MODE  
AUDIO  
RETURN  
REPEAT A-B  
ANGLE  
Select playback mode  
Change soundtrack language  
Remove DVD setup menu  
Repeat playback between A and B  
Change playback angle  
SCREEN SIZE Display Picture Size menu  
MARKER  
Index  
CCD/  
Closed Caption  
JUMP  
Locating desired scene  
RECALL/  
ZOOM  
Switch between present/last channel  
Zoom  
INPUT SELECT Display source selection menu  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN 12  
Remote control  
Inserting Batteries  
Open the battery compartment  
Install two “AAA” batteries  
Replace the compartment cover.  
1
cover in the direction of the arrow. 2 (supplied), paying attention to the 3  
polarity diagram in the battery  
compartment.  
Operation  
• Aim the remote control at the remote sensor and press control  
buttons to operate.  
• Operate the remote control within a 30° angle on either side of  
the remote sensor, up to a distance of approximately 15 feet.  
Approximately 15 feet  
NOTE:  
• Do not leave the remote control unit exposed to direct sunlight or in hot or humid places.  
• The remote control unit uses infrared beams to transmit signals, so sunlight or fluorescent light on the remote  
sensor may shorten operating distance.  
• Incorrect use of batteries may cause them to leak or burst. Read the battery warnings and use the batteries  
properly.  
• Do not mix old and new batteries.  
• Do not mix alkaline, standard (carbon-zinc), or rechargeable, (Ni-Cd, Ni-MH, etc.) batteries.  
• Remove batteries if the remote control will not be operated for an extended period of time.  
Power source  
TO USE AC POWER SOURCE  
Use the AC polarized line cord provided for operation on AC. Insert the AC cord plug into a standard 120V 60Hz  
polarized AC outlet.  
AC Outlet  
Wider Hole and Blade  
Polarized AC Cord Plug  
(One blade is wider than the other.)  
NOTE:  
• Never connect the AC line cord plug to other than the specified voltage (120V 60Hz).  
Use the attached power cord only.  
• If the polarized AC cord does not fit into a non-polarized AC outlet, do not attempt to file or cut the blade.  
It is the user’s responsibility to have an electrician replace the obsolete outlet.  
• If you cause a static discharge when touching the unit and the unit fails to function, simply unplug the unit from  
the AC outlet and plug it back in. The unit should return to normal operation.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
13 EN  
Antenna connections  
If you are using an indoor or outdoor antenna, follow the instructions below that correspond to your  
antenna system. If you are using a Cable TV service, see “Cable TV connections”.  
Combination VHF/UHF Antenna (Single 75 ohm cable)  
Antenna  
Connect the 75 ohm cable from the combination  
Jack  
VHF/UHF antenna to the Antenna Jack.  
75 ohm  
Coaxial  
Cable  
Cable TV connections  
This TV has an extended tuning range and can tune most cable channels without using a Cable TV  
Converter box. Some cable companies offer “premium pay channels” where the signal is scrambled.  
Descrambling these signals for normal viewing requires the use of a descrambler device which is  
generally provided by the Cable TV company.  
For subscribers to basic Cable TV service  
For basic Cable TV service not requiring a Converter/  
75 ohm  
Descrambler box, connect the 75 ohm Coaxial Cable directly  
Coaxial  
Cable  
Antenna  
Jack  
to the Antenna Jack on the back of the TV.  
For subscribers to scrambled Cable TV service  
If you subscribe to a Cable TV service which requires the use of a Converter/Descrambler box, connect  
the incoming 75 ohm Coaxial Cable to the Converter/Descrambler box. Using another 75 ohm Coaxial  
Cable, connect the output jack of the Converter/Descrambler box to the Antenna Jack on the TV. Follow the  
connections shown below. Set the TV to the output channel of the Converter/Descrambler box (usually channel  
3 or 4) and use the Converter/Descrambler box to select channels.  
Incoming  
75 ohm  
Cable TV  
Cable  
Antenna  
Jack  
75 ohm Cable to TV  
Converter/  
Descrambler  
For premium  
channels  
If you subscribe to a Cable TV service in which basic channels are unscrambled and premium channels require  
the use of a Converter/Descrambler box, you may wish to use a signal Splitter and an A/B Switch box (available  
from the Cable TV company or an electronics supply store). Follow the connections shown below. With the  
switch in the “B” position, you can directly tune any nonscrambled channels on your TV. With the switch in the  
“A” position, tune your TV to the output of the Converter/Descrambler box (usually channel 3 or 4) and use the  
Converter/Descrambler box to tune scrambled channels.  
Incoming  
Converter/  
75 ohm  
Cable TV  
Cable  
Antenna  
Jack  
Descrambler  
75 ohm Cable to TV  
A
A/B Switch  
Splitter  
B
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN 14  
Starting setup  
TV operation  
The Auto Setup menu appears the first time you  
turn on the TV, and assists you to specify the  
Air/Cable setting, and program your channels  
automatically.  
To turn on the TV, press POWER.  
1
(It may take approx. 10 seconds for a picture to  
appear on screen.)  
Adjust the volume level by pressing VOL + or .  
2
The volume level will be indicated on the screen  
IMPORTANT: Make sure that the antenna or cable  
TV system connection is made!  
by green bars. As the volume level increases, so  
do the number of bars. If the volume decreases,  
the number of green bars also decreases.  
To turn on the TV, press POWER (It may take  
1
approx. 10 seconds for a picture to appear on  
Set the Signal Type option to the appropriate  
3
4
screen.).The Auto Setup function begins.  
Auto Setup  
position (see “Air/Cable selection” on page 18).  
Press the Direct Channel Selection (0-9, )  
TV Location  
Store  
Off  
Cable  
Start  
buttons to select the channel.  
E-POP Demo  
Signal Type  
(If you press only channel number, channel  
selection will be delayed for a few seconds.)  
Automatic Search  
TO SELECT ANALOG CHANNELS  
Press or to select “TV Location”, then press  
or to select “Store” or “Home”. This product  
qualifies for ENERGY STAR in Home mode  
default setting.  
2
1-9:  
Press 1-9 as needed. Example, to  
select channel 2, press 2, then press  
ENTER.  
10-99:  
Press the 2 digits in order. Example,  
to select channel 12, press 1, 2, then  
press ENTER.  
NOTE:  
• This unit has been preset to STORE brightness.  
This setting does not qualify under ENERGY  
STAR.To reduce brightness and energy  
consumption, change setting to ‘HOME’.This  
setting does qualify under ENERGY STAR.  
• The device may not conform to the ENERGY  
STAR standard after “Reset” is performed or the  
“Backlight” is adjusted.  
100-135: Press the 3 digits in order. Example, to  
select channel 120, press 1, 2, 0, then  
press ENTER.  
TO SELECT DIGITAL CHANNELS  
Press the first 1-3 digits, then press the button,  
followed by the remaining number.  
Example, to select channel 15-1, press 1, 5, , 1,  
then press ENTER.  
Press or to select “E-POP Demo”, then press  
3
or to select “On” or “Off”.  
• If a channel is selected with only audio content,  
“Audio only” will be displayed on the screen.  
• If a channel is selected with a weak digital  
signal, “Digital channel signal strength is low”  
will be displayed on the screen.  
On: A TV feature introduction will be popped up  
at the bottom of the screen.  
Off: Turn off the E-POP Demo feature.  
Press or to select “Signal Type”, then press  
4
5
6
or to select “Cable” or “Air”.  
The same program may be available on either  
an analog channel or a digital channel.You may  
choose to watch either format.  
Press or to select “Automatic Search”, then  
press or ENTER.  
• If a channel is selected to which you have not  
subscribed, “Digital channel is encrypted” will  
be displayed on the screen.  
“Auto Setup” will begin. After the Auto Setup  
is completed, the TV channel appears on the  
screen.  
• Depending on the reception condition, it may  
take up to 30 minutes to complete memorizing  
digital cable channels. Please allow the  
process to complete without interruption.  
VHF/UHF/CABLE CHANNELS  
Air  
VHF  
Cable  
VHF  
NOTE:  
2-13  
2-13  
• If you press EXIT in the process of “Auto Setup”,  
the Auto Setup stops and changes to the normal  
screen.  
UHF  
STD/HRC/IRC  
14-69  
14-36  
(A) (W)  
37-59  
60-85  
86-94  
95-99  
(AA) (WW)  
(AAA) (ZZZ)  
(86) (94)  
• When you make a menu selection, your changes  
occur immediately.You do not have to press EXIT to  
see your changes.  
(A-5) (A-1)  
100-135 (100) (135)  
01  
(4A)  
NOTE:  
• If a channel with no broadcast is selected, the  
sound will automatically be muted.  
• It may take a few seconds for a digital channel  
picture to appear on screen after being selected.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
15 EN  
To select the video input source  
RECALL  
To view a signal from another device connected to  
your LCD TV, such as a VCR player, press INPUT  
SELECT, then press or or corresponding  
Number buttons (0-5), then press ENTER.  
This button allows you to go back to the last channel  
selected by pressing RECALL. Press RECALL again to  
return to the last channel you were watching.  
MUTE  
Input Select  
Press MUTE to switch off the sound. The TV’s sound  
will be silenced and “Mute” will appear on the screen.  
The sound can be switched back on by pressing this  
button again or the VOL + or .  
0.TV  
1.Video  
2.Component  
3.HDMI  
4.PC  
5.DVD  
SLEEP  
To set the TV to turn off after a preset amount of time,  
press SLEEP on the remote control. The clock will  
count up 10 minutes for each press of the SLEEP  
button (Off, 0h 10m, 0h 20m, ..., 2h 0m). After the sleep  
time is programmed, the display will appear briefly  
every ten minutes to remind you that the sleep timer  
is operating. To confirm the sleep timer setting, press  
SLEEP and the remaining time will be displayed for a  
few seconds. To cancel the sleep timer, press SLEEP  
repeatedly until the display turns to Off.  
[0-5]:Select  
CH  
/
Press and release CH  
/
. The channel  
automatically stops at the next channel set into  
memory.  
For proper operation, before selecting channels, they  
should be set into the memory. See “Memorizing  
channels” on page 18.  
DISPLAY  
Press DISPLAY to display the current information on  
the screen.  
Quick guide for menu  
operation  
When the TV receives a digital signal, the digital  
information will appear.  
Sleep Timer  
Off  
62-1 HDTV...Moving...Picture1...  
CH-1 TV-MA  
Digital Air  
English  
Call menu and for example: Select Language.  
No Program Information is available  
Press INPUT SELECT to select TV mode.  
1
Full  
1080i  
Press TV MENU. The TV menu screen will appear.  
2
Main Menu  
• Channel number  
• Channel label (if preset) Broadcast program name  
• V-Chip rating  
• Sleep timer  
• Program guide  
• Resolution  
• Station name  
>>  
Picture  
Audio  
CH  
Channel  
Lock  
• Signal type  
• Audio language  
• Picture size  
Setup  
:Select  
ENTER :Set  
Press or to select “Setup”, then press or  
3
4
When the TV receives an analog signal, the analog  
ENTER.  
information will appear.  
Press or to select “Language”, then press ◀  
or to select the desired language.  
…on the following pages the menu can be called  
in the same way as here.  
Sleep Timer  
Off  
14  
G
Analog Cable  
Mono  
Full  
480i  
Press EXIT to return to the normal screen.  
5
NOTE:  
• Channel number  
• V-Chip rating  
• Channel label (if preset)  
• Signal type  
• Picture size  
• Resolution  
• If no buttons are pressed for more than about 60  
seconds, the menu screen will return to normal  
operation automatically.  
• Sleep timer  
• Audio information  
(Stereo, SAP or Mono)  
Press DISPLAY again to clear the call display.  
NOTE:  
• After a few seconds, DISPLAY screen will return to  
normal TV operation automatically.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN 16  
Convenience functions  
You can change the default settings by pressing the TV MENU button on your remote, then select the one of the  
icons at the left of the menu - follow the On-Screen prompts to set your preferences.  
Icon  
Selected Items  
Setup hint  
Picture  
Picture  
Sports  
Bright and dynamic picture (factory-set)  
Preference  
Standard  
Movie  
Memory  
Standard picture quality (factory-set)  
Movie-like picture setting (factory-set)  
Your personal preferences (set by you; see “Picture Setting”)  
You can adjust the picture quality to your preference.  
Picture Setting Brightness /Contrast /  
Sharpness / Color / Tint  
Color Temperature  
Cool (Bluish) / Standard (Neutral) / Warm (Reddish)  
The Backlight feature adjusts the screen brightness for improved picture  
Backlight*2  
clarity.  
DBC  
On/Off  
Use this feature to change the Black level automatically according to the  
brightness of an image.The Black level will become dark in a dark scene.  
Picture Size  
Film Mode  
PC Setting  
See page 22.  
On/Off  
A smoother motion may be obtained by setting the Film Mode to “On” (480i only).  
Hor Position /  
Ver Position  
To adjust the horizontal / vertical position of the image on the PC monitor  
screen. Each video standard will require a different value for this setting.  
Clock  
Phase  
To minimize any vertical bars or stripes visible on the screen background.  
This must be adjusted after the frequency has been set optimize picture quality.  
To adjust the all PC settings automatically.  
Auto Adjust  
On/Off  
DNR  
DNR (Digital Noise Reduction) can reduce the roughness of the picture.  
Audio  
Equalizer Mode Standard/Music/Movie/ You can adjust the Equalizer Mode to your preference.  
News/Memory/Flat  
Audio Setting Bass/Treble  
Equalizer Setting  
You can adjust the sound quality to your preference. (Flat mode only)  
100Hz/250Hz/500Hz/1kHz/2kHz/4kHz/10kHz (Not available in Flat  
mode)  
Balance  
Stereo / SAP / Mono  
You can adjust the sound quality to your preference.  
MTS  
The multi-channel TV sound (MTS) feature provides high-fidelity  
stereo sound. MTS also can transmit a second audio program (SAP)  
containing a second language or other audio information.  
When the TV receives a stereo or SAP broadcast, the word “Stereo” or  
“SAP” displays on-screen every time you press DISPLAY.  
Surround  
On/Off  
On/Off  
The dynamic presence and sound created offers a thoroughly  
enjoyable listening experience.  
Auto Volume  
Audio Language  
Volume level can be adjusted automatically by the sound level.  
When two or more audio languages are included in a digital signal, you can select  
one of the audio languages. (This function is available only for digital broadcast.)  
HDMI Audio  
HDMI  
DVI  
When you connect the HDMI device to the TV, select this setting.  
When you connect the DVI device to the TV with analog audio cords,  
select this setting.  
Channel Add / Delete  
DTV Signal  
See page 18.  
See page 19.  
See page 18.  
See page 19.  
See page 20.  
See page 21.  
Auto Ch Memory  
Ch Label  
Lock  
Setup  
Closed Caption  
Language  
You can choose from three different languages (English, Français (French) and  
Español (Spanish)) for the on-screen displays.  
Select the language you prefer first, then proceed with the other menu options.  
Video Label  
On Timer  
See page 19.  
Off / 0h30m / 1h00m  
/ 1h30m / 2h00m /  
3h00m⋅⋅⋅12h00m  
You can set the On Timer to automatically turn on the TV. To cancel the  
On Timer select “Off”.  
Auto Shut Off*1 On/Off  
If the Auto Shut Off feature is On, a station being viewed stops  
broadcasting or DVD is not operated without the menu screen,and the  
TV is no operation for 15 minutes, the TV will automatically shut itself off.  
Auto Setup  
PC Standby  
See page 15.  
On/Off  
If the PC Standby feature is On, In PC mode, if no signal is received or  
no operation performed for 1 minute, the TV will turn to standby mode  
automatically (LED light will flash red). When an input signal is received  
or an operation performed on the PC, the TV will return to the On mode.  
The Reset function returns your Picture/Audio settings to the factory settings.  
“Picture Size”, “MTS” , “Audio Language” and “HDMI Audio” cannot be  
reset by this function.  
Reset*2  
NOTE:  
*¹ If there is no input signal in the PC mode, after 1 minute Auto Shut Off will be activated. In PC mode the “PC Standby”  
setting takes precedence.  
2
*
The device may not conform to the Energy Star standard after “Reset” is performed or the “Backlight” is adjusted.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
17 EN  
Adding Channel  
Memorizing channels  
If you find a new digital channel unregistered, you can  
add the new channel into the channel memory.  
This TV is equipped with a channel memory  
feature which allows channels to skip up or down  
to the next channel set into memory, skipping  
over unwanted channels. Before selecting  
channels, they must be programmed into the  
TV’s memory. To use this TV with an antenna, set  
the Signal Type option to the Air mode. When  
shipped from the factory, this menu option is in  
the Cable mode.  
Tune in the new channel.  
1
Select “Channel Add/Delete Adding  
2
Channel”, then press or ENTER.  
CH  
Add/Delete  
Adding Channel  
Add/Delete  
Clear All  
>>  
>>  
>>  
Air/Cable selection  
The new channel will be added into the channel  
memory.  
3
Select “Channel Auto Ch Memory Signal  
1
2
Type”.  
Add/Delete channel  
You can select the channel that you want to skip.  
Press or to select “Air” or “Cable”.  
Air - VHF/UHF channels  
Cable - CABLE TV channels  
Select “Channel Add/Delete Add/Delete”,  
1
2
then press or ENTER.  
CH  
Auto Ch Memory  
Press or to select the channel that you want  
Signal Type  
Automatic Search  
Cable  
Start  
to skip.  
CH  
Add/Delete  
NOTE:  
CH  
Signal  
2
3
Analog  
Analog  
Digital  
Digital  
Analog  
Add  
• It may take a few seconds for a digital channel  
picture to appear on screen after being selected.  
Add  
3-1  
3-2  
4
Delete  
Add  
Delete  
Automatic Search  
Select “Channel Auto Ch Memory Automatic  
1
Search”, then press or ENTER.  
Press or to select “Add” or “Delete”,  
3
4
whichever function you want to perform.  
CH  
Auto Ch Memory  
Repeat steps 2 - 3 for other channels you want to  
add or delete.  
Signal Type  
Automatic Search  
Cable  
Stop  
Clear All  
The TV will begin memorizing all the channels  
available in your area.  
All channels are deleted from the channel memory.  
2
Select “Channel Add/Delete Clear All”, then  
• It may take from 15 minutes to 30 minutes to  
complete memorizing digital cable channels.  
Depending on the reception condition, a bar  
display may not advance for several minutes,  
please be patient.  
press or ENTER.  
CH  
Add/Delete  
Adding Channel  
Add/Delete  
Clear All  
>>  
>>  
>>  
NOTE:  
Memorizing channels is best accomplished during  
evening “PRIMETIME” hours, as more stations are  
broadcasting digital signals. Memorizing channels can  
only be accomplished while a station is broadcasting  
a digital signal to set that channel into memory.  
• If you are unsure of the digital channels available  
receive a list based on your address or zip code.  
Should you require further assistance you may call  
our toll-free customer service line at 1-800-289-0980.  
• New digital channels may be added to your area  
periodically, it is recommended to perform the  
“Automatic Search” procedure regularly.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN 18  
Repeat steps 2-3 for other channel.You can  
assign a label to each channel.  
Checking the digital  
signal strength  
4
5
When you finish inputting the label name, press  
EXIT to return to the normal screen.  
This TV will allow you to view the digital signal  
meter for digital channels.  
To clear a Ch Label  
After step 2 above, press or to select “Label  
Clear”, then press or ENTER.  
Select “Channel DTV Signal”, then press or  
1
2
ENTER.  
NOTE:  
The digital signal strength screen will appear.  
• The channel labels will be reset after “Automatic  
Search” on page 18.  
If necessary, adjust the direction of the antenna to  
obtain the maximum signal strength.  
CH  
DTV Signal  
Labeling video inputs  
The Video Label feature allows you to label each  
input source for your TV.  
Select “Setup Video Label”, then press or  
1
2
3
0
50  
100  
ENTER.  
Signal Level  
Press or to select an input which you want to  
NOTE:  
label.  
• Signal meter feature is not available for analog  
channels.  
Press or to select the desired label for that  
• After 240 seconds, DTV Signal screen will return to  
normal TV operation automatically.  
input source.  
Video Label  
Video  
-
-
-
-
Labeling channels  
Component  
HDMI  
Channel label appear with the channel number  
display each time you turn on the TV, select a  
channel, or press DISPLAY.  
PC  
/ VCR / DVD / STB / Cable / Satellite / Receiver /  
You can choose any four characters to identify a  
channel.  
Game / Camcorder / PC / DVI PC / Blu-ray  
To create channel labels  
Select “Channel Ch Label”, then press or  
1
2
ENTER.  
Press or to select a channel you want to  
label, then press .  
CH  
Ch Label  
Channel Number  
Ch Label  
15-1  
CH-1  
>>  
Label Clear  
Press or repeatedly until the character you  
3
want appears in the first space.  
CH  
Ch Label  
Channel Number  
15-1  
CH-1  
>>  
Ch Label  
Label Clear  
The characters rotation as follows:  
, () @ / + =  
-
-
SPACE  
If the character which you desire appears, press  
ENTER.  
Repeat this step to enter the rest of the characters.  
If you would like a blank space in the label name,  
you must choose the empty space from the list of  
characters.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
19 EN  
When you select TV-Y7, TV-PG, TV-14 or TV-MA,  
Setting the V-Chip  
press DISPLAY to explain the rating.  
Genre:  
An age limitation can be set to restrict children from  
viewing or hearing violent scenes or pictures that you  
may choose to exclude. The restriction applies to “TV  
Rating” and “Movie Rating” if this data is transmitted.  
You may set this restriction separately. To use the  
V-Chip function, you must register a password.  
D
L
: Dialogue  
: Language  
: Sex  
S
V
:Violence  
FV  
: Fantasy Violence  
Movie Rating  
To register a password  
Movie Rating  
Select “Lock”, then press or ENTER.  
1
G
PG  
PG-13  
R
Select and enter your password (4 digits) using  
2
Number buttons (0-9), then press ENTER.  
NC-17  
X
Lock  
_
New Password  
* * *  
G
: All ages  
: Parental guidance  
PG  
” appears instead of the number.  
PG-13 : Parental guidance less than 13 years old  
R
: Under 17 years old parental guidance  
suggested  
Enter the same password again to confirm, then  
press ENTER.  
3
NC-17 : 17 years old and above  
The password is now registered.  
X
: Adult only  
NOTE:  
Press /to select the desired rating, then press  
4
5
• If you forget the password, contact Customer  
Service at 1-800-289-0980 for assistance.  
Your original remote control will be required.  
To avoid forgetting the password, write it down and  
keep in a safe place.  
ENTER.  
Press EXIT to return to the normal screen.  
V-Chip function is activated now.  
NOTE:  
• The V-Chip function is activated only on programs  
and input sources that include a rating signal.  
How to enter the V-Chip menu  
Select “Lock” menu, then press or ENTER.  
1
To change the password  
Use Number buttons (0-9) to enter your  
2
password, then press ENTER. The V-Chip menu  
In the V-Chip menu, press or to select  
1
will appear.  
“Change Password”, then press or ENTER.  
The Change Password screen will appear.  
To set the V-Chip  
Enter a new password using Number buttons  
2
3
In the V-Chip menu, press or to set “V-Chip”  
(0-9), then press ENTER.  
1
2
to “On”.  
Enter the same password again to confirm, then  
Press or to select “V-Chip Set”, then press ▶  
press ENTER.  
or ENTER.  
The password is now registered.  
The V-Chip Set menu will appear.  
Downloading the additional V-Chip rating system  
As a supplement to the standard V-Chip rating  
system, your television will be able to download an  
additional rating system, if such a system becomes  
available in the future.  
Press or to select which rating will be used,  
3
then press or ENTER. Each rating below will  
appear.  
TV Rating  
TV Rating  
To download the additional V-Chip rating system  
(when available)  
TV-Y  
TV-Y7  
TV-G  
TV-PG  
TV-14  
TV-MA  
In the V-Chip menu, press or to set “V-Chip”  
1
2
3
to “On”.  
Press or to select “V-Chip Set (DTV)”, then  
You can set the rating using age level and genre.  
press or ENTER.  
If the TV is not storing the additional rating  
Age:  
system, the TV will begin downloading it, which  
may take some time to be completed.  
TV-Y  
: All children  
TV-Y7 : 7 years old and above  
TV-G  
: General audience  
Set your preferred content rating limits for the  
4
5
TV-PG : Parental guidance  
additional rating system.  
TV-14 : 14 years old and above  
TV-MA : 17 years old and above  
You also need “Update” procedure to update  
rating information.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN 20  
NOTE:  
NOTE:  
You can only download the additional V-Chip rating  
system when your TV is receiving a digital signal.  
• When you download the additional rating system, it  
may take some time for the download to occur.  
• The V-Chip rating information and system are not  
determined or controlled by the TV.  
• If the program or video you selected is not closed-  
captioned, no captions will display on-screen.  
• If text is not available in your viewing area, a black  
rectangle may appear on-screen. If this happens,  
set the CC Setting to “Off”.  
• When selecting Closed Captions, the captioning will  
be delayed approx. 10 seconds.  
• The standard V-Chip rating system is available  
whether your TV is receiving a digital signal or not,  
and will block both analog and digital programs. To  
set the restriction level using the standard V-Chip  
rating system, select V-Chip Set in step 2.  
• The downloadable V-Chip rating system is an  
evolving technology, and availability, content, and  
format may vary.  
If no caption signal is received, no captions will appear,  
but the television will remain in the Caption mode.  
• Misspellings or unusual characters may  
occasionally appear during Closed Captioning.  
This is normal with Closed Captioning, especially  
with live programs. This is because during live  
programs, captions are also entered live. These  
transmissions do not allow time for editing.  
• When Captions are being displayed, on-screen  
displays, such as volume may be seen but may  
interfere with Closed Captions.  
You cannot select this feature if the TV is not  
receiving a digital signal for the current station.  
To clear the all V-Chip settings  
• Some cable systems and copy protection systems  
may interfere with the Closed Captioned signal.  
• If using an indoor antenna or if TV reception is very  
poor, the closed caption decoder may not appear or  
may appear with strange characters or misspelled  
words. In this case, adjust the antenna for better  
reception or use an outdoor antenna.  
In the V-Chip menu, press or to select  
1
“V-Chip Clear”, then press or ENTER.  
The V-Chip Clear screen will appear.  
Use Number buttons (0-9) to enter your  
2
password, then press ENTER. All of your settings  
return to the factory settings.  
• Closed Caption menu also can be displayed by  
pressing CCD on the remote control.  
Closed Caption  
CC advanced  
WHAT IS CLOSED CAPTIONING?  
This television has the capability to decode and  
display Closed Captioned television programs.  
Closed Captioning will display text on the screen  
for hearing impaired viewers or it will translate and  
display text in another language.  
When you have selected “Custom” as the display  
method, you can adjust the various setting listed  
below as follows:  
This feature is designed to customize Digital Caption  
only.  
Captions: This Closed Caption mode will display  
text on the screen in English or another language.  
Generally, Closed Captions in English are transmitted  
on C1 and Closed Captions in other languages are  
transmitted on C2.  
Select “Setup Closed Caption”, then press or  
1
ENTER.  
Press or to set “CC Setting” to “On”.  
2
Press or to select “Digital CC Preset”, then  
press or to select “Custom”.  
3
4
Text: The Text Closed Caption mode will usually fill  
1/2 of the screen with a programming schedule or  
other information.  
Press or to select “CC Advanced”, then  
press or ENTER.  
Select “Setup Closed Caption”, then press or  
The CC Advanced menu will appear.  
1
2
ENTER.  
Press or to select the desired item, then  
press or to change the setting.  
5
Press or to set “CC Setting” to “On”.  
On: Captions will be displayed on the screen.  
Off: Captions will not be displayed on the screen.  
CC Advanced  
Press or to select “Analog Caption” or “Digital  
3
Text Size  
Auto  
Auto  
Auto  
Auto  
Auto  
Auto  
Auto  
Caption”.  
Text Type  
Text Edge  
When you select “Analog Caption”, you can  
Text Color  
choose from C1, C2, C3, C4, T1, T2, T3 and T4.  
Text Opacity  
Background Color  
Background Opacity  
When you select “Digital Caption”, you can  
choose from CS1, CS2, CS3, CS4, CS5 and CS6.  
Press or to select the desired Closed  
4
Caption mode for both Digital and Analog Caption.  
Press or to select “CC Priority”, then press  
5
or to select “Digital CC” or “Analog CC”.  
NOTE:  
• Depending on the broadcast signal, some  
Analog Captions will function with a Digital  
broadcast signal. This step prevent that two  
kind of captions are overlapping.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
21 EN  
You can select from among the following items  
and parameters.  
Cinema Wide1 (for 4:3 format programs)  
To fill the screen, the right and left edges are  
extended, however; the center of the picture remains  
near its former ratio.  
Text Size:  
Text Type:  
Auto, Small, Standard, Large  
Auto, Style1, Style2, Style3, Style4,  
The top and bottom edges of the picture may be hidden.  
Style5, Style6, Style7  
Text Edge: Auto, None, Raised, Depressed,  
Uniform, Left Shadow, Right  
Shadow  
Text Color: Auto, Black, White, Red, Green,  
Blue, Yellow, Magenta, Cyan  
Text Opacity: Auto, Solid, Transparent,  
Cinema Wide2 (for letter box programs)  
The entire picture is uniformly enlarged—it is  
stretched the same amount both wider and taller  
(retains its original proportion).  
Translucent, Flashing  
Background Auto, Black, White, Red, Green,  
Color:  
Blue, Yellow, Magenta, Cyan  
Background Auto, Solid, Transparent,  
The top and bottom edges of the picture may be hidden.  
Opacity: Translucent, Flashing  
NOTE:  
You cannot set both “Text Color” and “Background  
Color” as a same color.  
You cannot set both “Text Opacity” and “Background  
Opacity” to “Transparent”.  
Cinema Wide3 (for letter box programs with  
subtitles)  
Setting the picture size  
To fill the width of the screen, it is extended  
horizontally. However; it is only slightly extended at the  
top and the bottom.  
You can change to a variety of picture sizes—  
Natural, Cinema Wide1, Cinema Wide2, Cinema  
Wide3, Full and Native.  
The top and bottom edges of the picture may be hidden.  
Selecting the picture size  
Select “Picture Picture Size”, then press or  
1
2
ENTER to display “Picture Size” menu  
.
A B C D E F G - - - - - - - - - - - - - - - -  
A B C D E F G - - - - - - - - - - - - - - - - - - - - - - - - - -  
Full (for 16:9 source programs)  
Full will display the picture at the maximum size.  
Press or or corresponding Number buttons  
(0-4) to select the desired picture size, as described  
below.  
Picture Size  
0.Natural  
1.Cinema Wide1  
2.Cinema Wide2  
3.Cinema Wide3  
4.Full  
Native (for PC mode only)  
Detects the resolution of the signal of the image and it  
will be shown on the screen with same amount of pixels.  
NOTE:  
• Selectable picture sizes may vary depending on the  
input source or broadcast signal.  
NOTE:  
• Some High Definition and/or Digital broadcasts may  
not allow you to change the picture size.  
• In HDMI or COMPONENT mode with a scanning  
rate of 720p, 1080i or 1080p (HDMI only) only the  
Cinema Wide2 and Full picture size feature are  
available.  
• Picture Size menu also can be displayed by  
pressing SCREEN SIZE on the remote control.  
Natural  
In some cases, this image will display the size of  
standard 4:3 with a black side bar.  
• In PC mode, only the Natural, Full and Native  
picture size features are available. In PC mode  
(WXGA), only the Full and Native picture size  
features are available.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN 22  
On the screen, “ ” changes to “Loading” and then  
playback will commence.  
DVD Operation  
3
4
• A menu screen may appear on the TV screen,  
if the disc has a menu feature. In this case,  
press , , , or ENTER to operate a menu  
feature.  
The following pages describe the setup/  
operation in DVD mode.  
Preparation  
Before DVD/CD operation, please make the following  
preparations.  
( )  
to end playback.  
Press STOP  
The unit can record where you stop a video, but it  
depends on the disc you are using. Press PLAY  
Insert the AC cord plug into a standard 120V  
1
(
)
to resume a playback point.The unit can  
60Hz polarized AC outlet.  
store the stopped points of the last five discs  
that you have played.When one of these discs is  
reloaded, you can resume playback from where  
you stopped playing last time.  
• If the AC cord plug is plugged in for the first  
time, wait for about 5 seconds before pressing  
POWER.  
NOTE:  
( )  
again (“Resume off”  
If you press STOP  
• When connecting to other equipment, unplug  
the unit from the AC outlet.  
appears on the screen) the unit will clear the  
stopped point.  
You cannot save a stopped point for some discs.  
If a number of discs played and stored in the unit  
exceeds five, a new memory will overwrite the  
oldest stored memory.  
2
Press POWER on the unit or on the remote  
control to turn on the unit. The POWER indicator  
will change to green.  
Each time you turn the unit ON, the TV/DVD  
starts from the TV mode.  
Press (EJECT).  
5
Remove the disc and then press POWER.  
The unit turns off.  
When using an amplifier, switch on the amplifier.  
Press TV/DVD to select DVD mode.  
3
• When you eject the disc, you may hear some  
mechanism noise, but it is not a malfunction.  
The DVD startup screen will appear on the screen.  
• If the DVD is not operated, the unit will  
automatically shut itself off after 15 minutes.  
NOTE:  
• If a non-compatible disc is loaded, “Can’t play disc”  
or “Incompatible disc region number Can’t play  
disc” will appear on the TV screen according to the  
type of loaded disc. In this case, check your disc  
again (see page 9).  
• Some discs may take a minute or so to start  
playback.  
• A prohibition message “Depending on the disc, this  
operation may be prohibited” or “This operation  
can’t be performed” may appear on the screen.  
This message means either the feature you tried is  
not available on the disc, or the unit cannot access  
the feature at this time. This does not indicate a  
problem with the unit.  
NOTE:  
• If the unit does not operate properly:  
Static electricity, etc., may affect the player’s  
operation. Disconnect the AC power cord once,  
then connect it again.  
• About inserting disc:  
If the unit is slanted or moved while inserting a disc,  
the disc may be damaged.  
• When you insert a single-faced disc label backwards  
(i.e. the wrong way) “Loading” will appear on the  
display and then “Can’t play disc” will be displayed.  
• Some playback operations of DVDs may be  
intentionally fixed by software producers. Since  
this unit plays DVDs according to the disc content  
recorded, some playback features may not be  
available. Also refer to the instructions supplied with  
the DVDs.  
Status display of disc  
Press DISPLAY. The status display of the disc will  
appear on the screen.  
• Display messages may change each time you press  
DISPLAY for some discs or files.  
To make the status display screen disappear, press  
DISPLAY again.  
Playback procedure  
Press TV/DVD to select DVD mode.  
1
Place the disc in the  
2
disc slot with the label  
side facing forward. (If  
the disc has a label.)  
Hold the disc without  
touching either of its  
surfaces, align it with  
the guides, and place it  
in position.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
23 EN  
In the zoom mode, press ZOOM repeatedly to  
Special playback  
3
return to a 1:1 view.  
Fast Forward Playback  
Press SEARCH (uu ) during normal playback.  
Each press of SEARCH (uu ) will increase the speed of  
the search.  
NOTE:  
You can select the Still Playback or Fast Forward  
(Review) Playback in the zoom mode.  
(
)
.
• To resume normal playback, press PLAY  
• Some discs may not respond to the zoom feature.  
Review Playback  
Locating desired scene  
Press SEARCH (tt ) during normal playback.  
Each press of SEARCH (tt ) will increase the speed of  
the search.  
Use the title, chapter and time recorded on the disc to  
locate the desired point to playback.  
(
)
.
• To resume normal playback, press PLAY  
Still Playback  
Press JUMP during playback.  
1
( )  
Press PAUSE/STILL  
during normal playback to  
pause playback.  
Press or to select the “Title Search”, “Chapter  
2
(
)
• To resume normal playback, press PLAY  
or  
Search”, “Time Search” or “Track Search”. Then  
( )  
PAUSE/STILL  
.
press or ENTER.  
Frame Advance  
( )  
Press Number buttons (09) to input the number.  
3
Press PAUSE/STILL  
during normal playback.  
One frame is advanced each time you press SEARCH  
• If you input a wrong number, press CANCEL.  
• Refer to the package supplied with the disc to  
check the numbers.  
(tt ) or SEARCH (uu ).  
(
)
.
• To resume normal playback, press PLAY  
Slow-motion Playback  
Press ENTER.  
• Playback starts.  
4
(
)
(
)
Press SLOW  
or SLOW  
during normal  
playback or still playback.  
• When you change the title, playback starts from  
Chapter 1 of the selected title.  
• Some discs may not work in the above  
operation.  
Each press of SLOW will change the speed of the  
slow.  
(
)
.
• To resume normal playback, press PLAY  
(
)
.
To resume the still playback, press PAUSE/STILL  
Locating a chapter or track  
(
)
(
)
Press SKIP  
Forward or SKIP  
Reverse  
A-B Repeat playback  
during playback to locate a chapter/track that you want to  
watch.  
A-B repeat playback allows you to repeat material  
between two selected points.  
Each time you press the button, a chapter or track is  
skipped.  
Press REPEAT A-B during playback.  
The start point is selected.  
1
NOTE:  
• The TV/DVD is capable of holding a still video image  
or On screen display image on your television screen  
indefinitely. If you leave the still video image or On  
screen display image displayed on your TV for an  
extended period of time, you risk permanent damage  
to your television screen.  
Press REPEAT A-B again.  
2
The end point is selected.  
Playback starts at the point that you selected.  
Playback stops at the end point, returns to Point A  
automatically, then starts again.  
To resume normal playback press REPEAT A-B  
Zooming  
again.  
This TV/DVD will allow you to zoom in on the frame  
image. You can then make selections by switching the  
position of the frame.  
NOTE:  
• In A-B Repeat mode, subtitles near the A or B  
locations may not be displayed.  
• You may not be able to set A-B Repeat during  
certain scenes of the DVD.  
Press ZOOM during playback.  
1
The center part of the image will be zoomed in.  
Each press of ZOOM will change the Zoom  
magnification Zoom 2× and Zoom 4×.  
• A-B Repeat does not work with an interactive DVD,  
MP3/WMA/JPEG-CD.  
Press ///to view a different part of the  
2
frame.  
You may move the frame from the center position  
UP, DOWN, LEFT or RIGHT.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN 24  
Marking desired scenes Changing soundtrack  
The TV/DVD stores the points that you want to watch  
language  
again up to 12 points.  
You can select the language when you play a  
multilingual disc.  
You can resume playback from each scene.  
Marking the scenes  
Press AUDIO during playback.  
1
Press MARKER during playback.  
1
The current soundtrack language will appear.  
Current/Total  
Select the blank Marker using ///, then  
2
Audio  
1/2  
English  
Dolby Digital 2/0CH  
press ENTER at the desired scene.  
• Up to 12 scenes can be selected.  
• Repeat this procedure to set the other 11  
scenes.  
Press AUDIO repeatedly until the desired  
language is selected.  
The on-screen display will disappear after a few  
seconds.  
2
Press MARKER to return to the normal screen.  
3
Returning to the scenes  
Current/Total  
Press MARKER during playback or stop mode.  
1
Audio  
2/2  
French  
Dolby Digital 2/0CH  
Press ///to select the Marker 1-12.  
2
Press ENTER.  
Playback starts from the marked scene.  
3
NOTE:  
• If the desired language is not heard after pressing  
AUDIO several times, the language is not recorded  
on the disc.  
To cancel the Marker  
Follow the above steps 1~2, then press CANCEL.  
• Changing soundtrack language is cancelled after  
“Resume off” has been selected.  
NOTE:  
• The initial default language or available language  
will be heard if the disc is played back again.  
• Some discs may not work with the marking  
operation.  
• The marking is cancelled when you eject the disc or  
turn the power off.  
Subtitles  
• Some subtitles recorded around the marker may fail  
to appear.  
Changing the subtitle language  
You can select the language when playing back a disc  
recorded with multilingual subtitles.  
Changing angles  
Press SUBTITLE repeatedly during playback until  
When playing back a disc recorded with multi-angle  
facility, you can change the view angle.  
1
your desired language appears.  
The on-screen display will disappear after a few  
seconds.  
Press ANGLE during playback.  
The current angle will appear.  
1
Current/Total  
Subtitle 1/2  
English  
Current/Total  
Angle  
1/2  
Turning the subtitles off  
Press SUBTITLE during playback until “Off” appears.  
Press ANGLE repeatedly until the desired angle is  
2
selected.  
NOTE:  
• Changing subtitle language is cancelled after  
NOTE:  
“Resume off” has been selected.  
• Some functions may not work on some DVDs. You  
may not be able to turn subtitles on or off or change  
subtitles.  
• In case of JPEG-playback, the JPEG-image is  
rotated 90 degrees to the right.  
• Depending on the DVD, you may not be able  
to change the angles even if multi-angles are  
recorded on the DVD.  
While playing the DVD, the subtitle may change  
when:  
- you eject or insert the disc.  
- you change the title.  
• In some cases, the subtitle language is not changed  
to the selected one immediately.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
25 EN  
Using HOME MENU  
Play mode  
A-B repeat playback allows you to repeat a selection  
between two selected points.  
A-B repeat playback  
Playing a disc  
Press SETUP during stop mode.  
HOME MENU will appear.  
1
Play Mode  
Press PLAY MODE  
1
HOME MENU  
Press ///▶  
to select “Disc  
Navigator”, then  
DVD  
2
during playback.  
Play Mode screen  
will appear.  
A-B Repeat  
Repeat  
A(Start Point)  
B(End Point)  
Off  
Audio Settings  
Play Mode  
Video Adjust  
Random  
Program  
Search Mode  
Disc Navigator  
press ENTER  
.
Initial Settings  
Press /to select “A-B Repeat”, then press or  
2
3
4
Disc Navigator  
Title  
Chapter  
Press /to select  
desired option, then  
press ENTER.  
3
ENTER.  
Press /to select “A(Start Point)”, then press  
ENTER. The start point is selected.  
• Disc Navigator may not work with some discs.  
• Depending on a disc, you can select Title,  
Chapter, or both.  
Press /to select “B(End Point)”, then press  
ENTER.  
The end point is selected. Playback starts at the  
point that you selected. Playback stops at the end  
point and returns to Point A automatically, then  
starts again.  
Press ///or Number Buttons (09) to  
select Title or Chapter, then press ENTER.  
• Press SKIP ( ) or SKIP ( ) to move to the  
next/previous page.  
4
To resume normal playback  
Select “Off” in step 3.  
• Press RETURN to return to the previous screen.  
NOTE:  
Playing a file  
• Some discs may not work with the Play Mode function.  
• A-B Repeat playback does not work with MP3/WMA  
CD’s.  
Press SETUP during stop mode.  
1
2
3
HOME MENU will appear.  
Repeat playback  
Press ///to select “Disc Navigator”, then  
press ENTER.  
Press PLAY MODE during playback.  
1
Play Mode screen will appear.  
00:00/ 00:00  
0kbps  
Press /to select  
folder, then press  
ENTER.  
Press /to select “Repeat”, then press  
or  
2
3
Folder1  
Folder2  
Folder3  
Folder4  
ENTER  
.
Press /to select desired repeat option, then  
press ENTER.  
The unit automatically starts repeat playback after  
finishing the current title or chapter.  
Press /to select file, then press ENTER.  
• If you select a JPEG file, the unit shows the  
pictures one after another automatically.  
• Press RETURN to go to the previous step.  
4
To resume normal playback  
Select “Repeat Off” in step 3.  
Random playback  
NOTE:  
Press PLAY MODE during playback or stop mode.  
1
2
3
Play Mode screen will appear.  
• When music files and JPEG files are recorded  
on one disc, you can play them simultaneously.  
Please select the music file then select the  
JPEG file.  
Press /to select “Random”, then press  
or  
ENTER  
.
Press /to select desired random playback  
option, then press ENTER.  
The unit automatically starts random playback.  
To resume normal playback  
Select “Random Off” in step 3.  
NOTE:  
You cannot play Random playback for programmed  
contents (Random play is not permitted during  
Program playback).  
During Random playback the same title, chapter or  
track may be repeated.  
Random playback does not work with MP3/WMA CD’s.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN 26  
Program playback  
Play Mode  
Input Title, Chapter,  
Track or Folder number  
or Time by using  
Number buttons  
(09) and press  
ENTER.  
4
Press PLAY MODE during playback or stop mode.  
Play Mode screen will appear.  
A-B Repeat  
Title Search  
1
Input Chapter  
Repeat  
Chapter Search  
Time Search  
Random  
0
0
1
Program  
Search Mode  
Press /to select “Program”, then press or  
ENTER.  
2
Press /to select  
3
Program  
Current  
Title:02 Chapter:001  
Chapter 1-004  
• For instance, if you want to enter 1hr 4min  
(64:00), input 6, 4, 0, 0.  
NOTE:  
Program Step  
Title 1-38  
“Create/Edit”, then  
press ENTER.  
01. 01  
02.  
Title 01  
Title 02  
Title 03  
Title 04  
Title 05  
Title 06  
Title 07  
Title 08  
Chapter 001  
Chapter 002  
Chapter 003  
Chapter 004  
03.  
04.  
“Create/Edit” display  
differs, depending on  
discs or files.  
05.  
06.  
You can locate a desired scene in the Menu  
07.  
08.  
screen for some DVD videos.  
• In stop mode, you can also enter the Play Mode  
screen by selecting “Play Mode” in HOME  
MENU.  
Press ///to select Title, Chapter, Track or  
File, then press ENTER.  
• When you add a program, find where you  
want to add it (Program Step) and select Title,  
Chapter, Track or File then press ENTER. (It will  
be added to the left if File is added.)  
To go to previous step, press RETURN.  
• If RETURN is pressed while programming, the  
content will be deleted.  
To delete a program, select Program Step that  
you want to delete and press CANCEL.  
4
5
Audio Settings menu  
The Audio Settings menu offers features for adjusting  
the way discs sound.  
Press SETUP during stop mode.  
HOME MENU will appear.  
1
HOME MENU  
Press ///▶  
to select “Audio  
Settings”, then press  
ENTER.  
DVD  
2
3
4
Audio Settings  
Play Mode  
Video Adjust  
Press PLAY ( ).  
To play existing programmed contents, select  
“Playback Start” from Play Mode screen and  
press ENTER.  
Disc Navigator  
Initial Settings  
Audio Settings  
To resume normal playback, select “Playback  
Stop” in Play Mode screen and press ENTER.  
Your programmed contents are saved.  
To delete all programmed contents, select  
“Program Delete” in Play Mode screen and  
press ENTER.  
Press ///to  
setting the option,  
then press ENTER.  
Equalizer  
Audio DRC  
Dialog  
Off  
Rock  
Pop  
Live  
Dance  
Techno  
Classic  
Soft  
Press SETUP to save the setting.  
NOTE:  
Equalizer  
You can repeat the programmed contents. Select  
“Program Repeat” from “Repeat” in the Play Mode  
screen during Program playback.  
Select the most suitable setting to match a  
category of music that you are listening to.  
You cannot play Random playback for programmed  
contents (Random play is not permitted during  
Program playback).  
Audio DRC  
• Adjusts loud sound levels down and quiet  
sound levels up while playing. This is useful,  
for instance, when you watch a film in the late  
night.  
In stop mode, you can also enter Play Mode  
screen by selecting “Play Mode” in HOME MENU.  
• Audio DRC only works with Dolby Digital  
Sound.  
Locating desired scene  
• The effect depends on your AV amplifier and  
speaker volume. Adjust the sound as you wish  
and find the most effective setting.  
Press PLAY MODE during playback or stop mode.  
Play Mode screen will appear.  
1
Press /to select “Search Mode”, then press ▶  
2
3
Dialog  
or ENTER.  
Adjusts the audio setting when you cannot hear  
dialogs very well.  
Press /to select desired search mode option,  
then press or ENTER.  
NOTE:  
• Search Mode options differs, depending on  
discs or files.  
• It may not be very effective for some discs or  
files.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
27 EN  
Video Adjust menu  
Quick guide for DVD menu  
operation  
From the Video Adjust menu you can adjust various  
settings that affect how the picture is presented.  
You can change the default settings to customize  
performance to your preference.  
Press SETUP during stop mode.  
HOME MENU will appear.  
1
Setting procedure  
HOME MENU  
Press ///to  
select “Video Adjust”,  
then press ENTER.  
DVD  
2
Press SETUP in stop mode.  
HOME MENU will appear.  
1
Audio Settings  
Play Mode  
Video Adjust  
Disc Navigator  
HOME MENU  
Initial Settings  
Press ///to  
select “Initial Settings”,  
then press ENTER.  
DVD  
2
Audio Settings  
Play Mode  
Video Adjust  
Video Adjust  
Sharpness  
Brightness  
Contrast  
Gamma  
Press ///to  
setting the option,  
then press ENTER.  
3
Disc Navigator  
Fine  
Standard  
Soft  
Initial Settings  
Hue  
Chroma Level  
Press ///to select the desired option, then  
3
4
press ENTER.  
Change the selection using ///or ENTER,  
by referring to the corresponding page 29.  
• Repeat steps 3 and 4 to change other options.  
Press SETUP to save the setting.  
4
Sharpness  
Adjust sharpness of images.  
To clear HOME MENU screen, press SETUP.  
5
Brightness  
Adjust brightness of images.  
Contrast  
Adjust a ratio of brightness between the brightest part  
and the darkest part.  
Gamma  
Emphasizes the dark part of images.  
Hue  
Adjusts the balance between green and red.  
Chroma Level  
Adjusts color density. It is effective with animation or  
something with high color density.  
NOTE:  
• It may not be very effective for some discs or files.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN 28  
Function Setup  
Setting  
Option  
Digital Audio Out settings  
Digital Out  
On  
Digital audio is output when playing a disc.  
Digital audio is not output when playing a disc.  
Off  
Dolby Digital Out  
Dolby Digital  
Dolby Digital encoded digital audio is output when playing a  
Dolby Digital DVD disc.  
Dolby Digital > PCM  
DTS  
Dolby Digital audio is converted to PCM audio before being  
output.  
DTS encoded digital audio is output when playing a DTS disc.  
(Noise will be output if your amplifier/receiver is not compatible  
with DTS audio.)  
DTS Out  
Off  
DTS encoded digital audio is not output when playing a DTS  
disc.  
96kHz PCM Out  
MPEG Out  
96kHz > 48kHz  
96kHz  
MPEG  
96 kHz digital audio is converted to 48 kHz for digital output.  
96 kHz digital audio is output as is at 96 kHz.  
MPEG encoded digital audio is output as is.  
MPEG > PCM  
MPEG encoded digital audio is converted to PCM audio for  
digital output.  
Video Output settings  
TV Screen 4:3 (Letter Box)  
Set Picture Size to Natural. Widescreen movies are shown with  
black bars top and bottom.  
4:3 (Pan & Scan)  
Set Picture Size to Natural. Widescreen movies are shown with  
the sides cropped so that the image fills the screen.  
16:9 (Wide)  
Set if you have a widescreen TV.  
Language settings  
Audio Language  
English/French/Spanish If there is an English, French or Spanish soundtrack on the  
disc, then it will be played.  
Other Language  
Select to choose a language other than the ones displayed.  
(See “Language Code List” on page 31.)  
Subtitle Language English/French/Spanish If there is an English, French or Spanish subtitle on the disc,  
then it will be displayed.  
Other Language  
Select to choose a language other than the ones displayed. (see  
“Language Code List” on page 31.)  
DVD Menu Lang.  
w/Subtitle Lang.  
DVD disc menus will be displayed in the same language as  
your selected subtitle language, if possible.  
English/French/Spanish If there is an English, French or Spanish DVD menu language  
on the disc, then it will be displayed.  
Other Language  
Select to choose a language other than the ones displayed. (see  
“Language Code List” on page 31.)  
Subtitle Display  
On  
Off  
Subtitles are displayed according to your selected subtitle  
language (see above).  
Subtitles are always off by default when you play a DVD disc  
(note that some discs override this setting).  
Display settings  
Angle Indicator  
On  
Off  
A camera icon is displayed on-screen during multi-angle  
scenes on a DVD disc.  
No multi-angle indication is shown.  
Options settings  
Parental Lock  
See page 30.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
29 EN  
Level Change  
Parental Control  
Initial Settings  
Press  
or  
to select  
1
Some discs are specified as not suitable for children.  
Such discs can be limited not to playback with the  
unit.  
Digital Audio Out  
Video Output  
Language  
Parental Lock  
Password Change  
Level Change  
Country Code  
“Level Change”, then  
Display  
press ENTER.  
Options  
How to into the Parental Lock menu  
Initial Settings  
Press Number  
buttons (09) to  
input the current  
password, then press  
ENTER.  
2
Digital Audio Out  
Video Output  
Language  
Parental Lock: Level Change  
Password  
Press SETUP in stop mode.  
HOME MENU will appear.  
1
Display  
Options  
1
2
3
4
5
6
7
8
Off  
HOME MENU  
Press ///▶  
to select “Initial  
Settings”, then press  
ENTER.  
DVD  
2
Audio Settings  
Play Mode  
Video Adjust  
Initial Settings  
Disc Navigator  
Press  
or  
to  
3
Digital Audio Out  
Video Output  
Language  
Parental Lock: Level Change  
Password  
select from the level  
1 to level 8.  
Initial Settings  
Display  
Options  
1
2
3
4
5
6
7
8
Off  
The limitation will be  
more severe as the  
level number is lower.  
Then press ENTER.  
Press /to select “Options”, then press or  
3
ENTER  
.
Then press or ENTER to enter the Parental  
Lock menu.  
Level 1: DVD software for adults cannot be  
played back.  
Set Password  
Level 8: Virtually all DVD software can be  
played back.  
Initial Settings  
1
Press  
or  
to  
Digital Audio Out  
Video Output  
Language  
Display  
Options  
Parental Lock  
Password  
Level Change  
Country Code  
Level Off: The parental control setting does not  
select “Password”,  
function.  
then press ENTER.  
Country Code  
Initial Settings  
Initial Settings  
Press  
or  
to select  
1
2
Press Number  
Digital Audio Out  
Video Output  
Language  
Parental Lock  
Password Change  
Level Change  
Country Code  
Digital Audio Out  
Video Output  
Language  
Display  
Options  
Parental Lock: Register Code Number  
“Country Code”, then  
buttons (09) to  
input the password,  
then press ENTER.  
Display  
press ENTER.  
Options  
Initial Settings  
Press Number  
buttons (09) to  
input the current  
password, then press  
ENTER.  
2
Change Password  
Digital Audio Out  
Video Output  
Language  
Parental Lock: Change Country Code  
Password  
Initial Settings  
Country Code List  
us  
Code  
Display  
Press  
or  
to  
1
Options  
2
1
1
9
Digital Audio Out  
Video Output  
Language  
Parental Lock  
Password Change  
Level Change  
Country Code  
select “Password  
Change”, then press  
ENTER.  
Display  
Options  
Initial Settings  
Press  
or  
to  
3
Digital Audio Out  
Video Output  
Language  
Parental Lock: Change Country Code  
Password  
select the input mode  
from “Country Code  
List” or “Code”.  
Initial Settings  
Country Code List  
us  
Code  
Press Number  
buttons (09) to  
input the current  
password, then press  
ENTER.  
Display  
2
Options  
Digital Audio Out  
Video Output  
Language  
Parental Lock: Password Change  
Password  
2
1
1
9
New Password  
Display  
Options  
• When you selected “Country Code List”: Press  
or to select “Country Code”, then press  
ENTER.  
Initial Settings  
• When you selected “Code”: Press then use  
the Number buttons (0-9) to enter the 4-digit  
“Country Code”, then press ENTER. (see  
Country/Area Code List on page 31)  
Press Number  
buttons (09)  
to input the new  
password. Press  
ENTER. Now your  
new password has  
been set. Be sure  
to remember this  
number!  
3
Digital Audio Out  
Video Output  
Language  
Parental Lock: Password Change  
Password  
New Password  
Display  
Options  
NOTE:  
• Depending on the discs, the unit cannot limit  
playback.  
• Some discs may not be encoded with specific  
rating level information though its disc jacket  
says “adult”. For those discs, the age restriction  
will not work.  
• If you input a wrong number, press , then input  
correct number.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN 30  
Language Code List  
Language (Language code letter), Language code  
Japanese (ja), 1001  
English (en), 0514  
French (fr), 0618  
Bhutani (dz), 0426  
Esperanto (eo), 0515  
Estonian (et), 0520  
Basque (eu), 0521  
Persian (fa), 0601  
Finnish (fi), 0609  
Kirghiz (ky), 1125  
Sinhalese (si), 1909  
Slovak (sk), 1911  
Slovenian (sl), 1912  
Samoan (sm), 1913  
Shona (sn), 1914  
Somali (so), 1915  
Albanian (sq), 1917  
Serbian (sr), 1918  
Siswati (ss), 1919  
Sesotho (st), 1920  
Sundanese (su), 1921  
Swahili (sw), 1923  
Tamil (ta), 2001  
Latin (la), 1201  
Lingala (ln), 1214  
German (de), 0405  
Italian (it), 0920  
Laothian (lo), 1215  
Lithuanian (lt), 1220  
Latvian (lv), 1222  
Spanish (es), 0519  
Chinese (zh), 2608  
Dutch (nl), 1412  
Fiji (fj), 0610  
Malagasy (mg), 1307  
Maori (mi), 1309  
Faroese (fo), 0615  
Frisian (fy), 0625  
Irish (ga), 0701  
Portuguese (pt), 1620  
Swedish (sv), 1922  
Russian (ru), 1821  
Korean (ko), 1115  
Greek (el), 0512  
Macedonian (mk), 1311  
Malayalam (ml), 1312  
Mongolian (mn), 1314  
Moldavian (mo), 1315  
Marathi (mr), 1318  
Malay (ms), 1319  
Scots-Gaelic (gd), 0704  
Galician (gl), 0712  
Guarani (gn), 0714  
Gujarati (gu), 0721  
Hausa (ha), 0801  
Hindi (hi), 0809  
Afar (aa), 0101  
Telugu (te), 2005  
Tajik (tg), 2007  
Abkhazian (ab), 0102  
Afrikaans (af), 0106  
Amharic (am), 0113  
Arabic (ar), 0118  
Maltese (mt), 1320  
Burmese (my), 1325  
Nauru (na), 1401  
Thai (th), 2008  
Croatian (hr), 0818  
Hungarian (hu), 0821  
Armenian (hy), 0825  
Interlingua (ia), 0901  
Interlingue (ie), 0905  
Inupiak (ik), 0911  
Tigrinya (ti), 2009  
Turkmen (tk), 2011  
Tagalog (tl), 2012  
Setswana (tn), 2014  
Tonga (to), 2015  
Turkish (tr), 2018  
Tsonga (ts), 2019  
Tatar (tt), 2020  
Nepali (ne), 1405  
Assamese (as), 0119  
Aymara (ay), 0125  
Azerbaijani (az), 0126  
Bashkir (ba), 0201  
Norwegian (no), 1415  
Occitan (oc), 1503  
Oromo (om), 1513  
Oriya (or), 1518  
Byelorussian (be), 0205 Indonesian (in), 0914  
Panjabi (pa), 1601  
Polish (pl), 1612  
Bulgarian (bg), 0207  
Bihari (bh), 0208  
Bislama (bi), 0209  
Bengali (bn), 0214  
Tibetan (bo), 0215  
Breton (br), 0218  
Catalan (ca), 0301  
Corsican (co), 0315  
Czech (cs), 0319  
Welsh (cy), 0325  
Danish (da), 0401  
Icelandic (is), 0919  
Hebrew (iw), 0923  
Yiddish (ji), 1009  
Pashto, Pushto (ps), 1619  
Quechua (qu), 1721  
Rhaeto-Romance (rm), 1813  
Kirundi (rn), 1814  
Twi (tw), 2023  
Ukrainian (uk), 2111  
Urdu (ur), 2118  
Javanese (jw), 1023  
Georgian (ka), 1101  
Kazakh (kk), 1111  
Greenlandic (kl), 1112  
Cambodian (km), 1113  
Kannada (kn), 1114  
Kashmiri (ks), 1119  
Kurdish (ku), 1121  
Uzbek (uz), 2126  
Vietnamese (vi), 2209  
Volapük (vo), 2215  
Wolof (wo), 2315  
Xhosa (xh), 2408  
Yoruba (yo), 2515  
Zulu (zu), 2621  
Romanian (ro), 1815  
Kinyarwanda (rw), 1823  
Sanskrit (sa), 1901  
Sindhi (sd), 1904  
Sangho (sg), 1907  
Serbo-Croatian (sh), 1908  
Country/Area Code List  
Country/Area, Country/Area code, Country/Area code letter  
Argentina, 0118, ar  
Australia, 0121, au  
Austria, 0120, at  
Belgium, 0205, be  
Brazil, 0218, br  
Finland, 0609, fi  
France, 0618, fr  
Malaysia, 1325, my  
Mexico, 1324, mx  
Singapore, 1907, sg  
Spain, 0519, es  
Germany, 0405, de  
Hong Kong, 0811, hk  
India, 0914, in  
Netherlands, 1412, nl  
New Zealand, 1426, nz  
Norway, 1415, no  
Sweden, 1905, se  
Switzerland, 0308, ch  
Taiwan, 2023, tw  
Thailand, 2008, th  
United Kingdom, 0702, gb  
USA, 2119, us  
Canada, 0301, ca  
Chile, 0312, cl  
Indonesia, 0904, id  
Italy, 0920, it  
Pakistan, 1611, pk  
Philippines, 1608, ph  
Portugal, 1620, pt  
China, 0314, cn  
Denmark, 0411, dk  
Japan, 1016, jp  
Republic of Korea, 1118, kr  
Russian Federation, 1821, ru  
Download from Www.Somanuals.com. All Manuals Search And Download.  
31 EN  
Connections to other equipment  
The exact arrangement you use to interconnect various video and audio components to this unit is dependent  
on the model and features of each component. Check the Owner’s Manual provided with each component for  
the location of video and audio inputs and outputs.  
To connect the LCD TV/DVD to a VCR  
VCR  
To VIDEO/AUDIO IN  
To Video/Audio OUT  
Rear of the unit  
Video/Audio cord (not supplied)  
To connect the LCD TV/DVD to a DVD player with Component Video Input  
You can enjoy a high quality picture by connecting the unit’s COMPONENT VIDEO OUT jacks of your DVD  
player with the component video cables (not supplied).  
Rear of the unit  
To AUDIO IN  
To Audio OUT  
Audio cord  
(not supplied)  
DVD  
Y
Pb  
Pr  
Pr  
Pb  
Y
Component video cord  
(not supplied)  
To COMPONENT IN  
(Y,Pb,Pr)  
To Component OUT  
NOTE:  
• Component Video input of the unit are for use with a device which output 480i/1080i interlaced signals and  
480p/720p progressive signals.  
To connect the LCD TV/DVD to a camcorder, or a game console  
To playback from a camcorder, connect the camcorder to the unit as shown.  
This unit can also be used as a display device for many video games. However, due to the wide variety of  
signals generated by these devices and subsequent hook-up variations required, they have not all been  
included in the suggested connection diagrams.You’ll need to consult each component’s Owner’s Manual for  
additional information.  
Rear of the unit  
To VIDEO/AUDIO IN  
To Video/Audio OUT  
GAME CONSOLE  
or  
Video/Audio cord (not supplied)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN 32  
Connections to other equipment  
Using an AV Amplifier with built-in digital surround  
If you are using an AV Amplifier with built-in digital surround sound, you can enjoy various audio systems including  
Dolby Digital Surround audio that sounds just like the movie.  
Connect an AV amplifier with built-in Dolby Digital decoder, DTS decoder, or MPEG decoder etc. as  
shown below.  
Rear of the unit  
Front  
Speaker  
Subwoofer  
(Right)  
TV/DVD  
Front  
Speaker  
(Left)  
To COAXIAL OUT  
Coaxial digital cable  
(not supplied)  
To Coaxial  
Center Speaker  
Digital Audio Input  
Surround  
Surround  
Speaker (Left)  
Speaker  
(Right)  
AV Amplifier with built-in digital surround decoder  
NOTE:  
• When you are viewing digital broadcast, this unit will not work in conjunction with DTS audio or MPEG audio.  
There will be no sound output if connected to an AV amplifier with a built-in DTS decoder or MPEG decoder.  
To connect the LCD TV/DVD to a PC (Personal Computer)  
BEFORE YOU CONNECT THIS TV TO YOUR PC, CHANGE THE ADJUSTMENT OF YOUR PC’S  
RESOLUTION AND REFRESH RATE (60 HZ).  
Connect one end of a (male to male) VGA cable to the video cord of the computer and the other end to the VGA  
connector PC MONITOR IN on the rear of the TV. Attach the connectors firmly with the screws on the plug. In case  
of a Multimedia computer, connect the audio cord to the audio output of your Multimedia computer and to the  
AUDIO IN connector of the AUDIO (L/R) IN jack of the TV.You can also connect the PC with HDMI cable. If you  
use HDMI cable, you don’t have to connect the audio cord. If you use DVI-to-HDMI cable, please connect audio  
cord as same way as VGA cable.  
Press INPUT SELECT on the remote control to select PC mode.  
Switch on the computer. The TV can operate as the computer monitor.  
Rear of the unit  
To AUDIO  
(L/R) IN  
Monitor Display modes  
Mode Resolution Refresh rate  
VGA  
VGA  
640x480 60/ 72/ 75 Hz  
720x400 70Hz  
SVGA 800x600 56/ 60/ 72/ 75 Hz  
XGA 1024x768 60/ 70/ 75 Hz  
WXGA 1280x768 60Hz  
WXGA 1280x720 60Hz  
WXGA 1360x768 60Hz  
To HDMI/DVI IN  
To PC  
MONITOR  
IN  
To return to normal mode  
HDMI cable (not supplied)  
VGA cable (not supplied)  
Audio cord (not supplied)  
Press INPUT SELECT again.  
NOTE:  
• The on-screen displays will have a different appearance in PC mode than in TV mode.  
• If there is no video signal from the PC when the unit is in PC mode, “No signal” will appear on the TV-screen.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
33 EN  
Connections to other equipment  
To connect a HDMI or a DVI device to the unit  
The HDMI input receives digital audio and uncompressed video from a HDMI device or uncompressed digital  
video from a DVI device.  
When you connect to a DVI device with a HDMI-to-DVI adapter cable, it transfers only video signal. Separate  
analog audio cords required.  
To DVI output  
Rear of the unit  
Audio cord (not supplied)  
To AUDIO (L/R) IN  
HDMI - to - DVI adapter cable  
(HDMI type A connector)  
DVI device  
(not supplied)  
To HDMI/DVI IN  
or  
HDMI device  
HDMI cable (type A connector)  
(not supplied)  
To HDMI output  
NOTE:  
• When using HDMI/DVI IN to connect your HDMI or DVI devices, you must select the corresponding  
audio input source (HDMI or DVI) on the menu screen (see page 17). Otherwise you will only see the  
image with no sound.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN 34  
Reception disturbances  
Most types of television interference can be remedied by adjusting the height and position of the VHF/UHF  
antenna. Outdoor antennas are recommended for best results. The most common types of television  
interference are shown below. If one of these symptoms appear when the TV is connected to a Cable TV  
system, the disturbance may be caused by the local Cable TV company broadcast.  
IGNITION  
Black spots or horizontal streaks may appear, the picture may flutter or  
drift. Usually caused by interference from automobile ignition systems,  
neon lamps or AC powered tools and appliances such as drills or hair  
dryers.  
GHOSTS  
Ghosts are caused by the television signal following two paths. One is the  
direct path and the other is reflected by tall buildings, hills or other large  
objects. Changing the direction or position of the antenna may improve  
the reception.  
SNOW  
If the TV is located far from the TV station, in a fringe reception area where  
the signal is weak, small dots may appear in the picture.  
If the signal is extremely weak, the installation of a larger external antenna  
may be necessary.  
RADIO FREQUENCY INTERFERENCE (RFI)  
Caused by two-way radios, this type of interference produces moving  
ripples or diagonal streaks in the picture. Some cases may cause a loss of  
contrast in the picture. Changing the direction and position of the antenna  
or installing an RFI filter may improve the picture.  
PICTURE SIZE VARIATION  
A slight picture size variation is normal when you adjust the CONTRAST or  
BRIGHTNESS settings.  
CARE AND MAINTENANCE  
To prevent fire or shock hazard, disconnect the TV from the power source before cleaning.  
The finish on the cabinet may be cleaned with mild soap and a soft, damp cloth and cared for as other furniture.  
Use caution when cleaning or wiping the plastic parts.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
35 EN  
Problems and troubleshooting  
Use the following check list for troubleshooting when you have problems with your TV/DVD. Consult your local  
dealer or service outlet if problems persist.  
Be sure all connections are properly made when using with other units.  
SYMPTOMS  
POWER  
POSSIBLE SOLUTIONS  
PAGE  
• Make sure the power cord is plugged in.  
TV/DVD does not operate. • Power is off, check fuse or circuit breaker.  
• Unplug unit, then plug it back in.  
13  
TV BROADCAST RECEPTION  
• Station or Cable TV experiencing problems, tune to another station.  
• Check Volume adjustments or muting.  
• Check for sources of possible interference.  
15  
15, 16  
35  
15  
14  
35  
17  
Poor sound or no sound.  
Poor picture or no picture.  
Station or Cable TV experiencing problems, tune to another station.  
• Check antenna or Cable TV connections, reorient antenna.  
• Check for sources of possible interference.  
• Check picture control adjustments.  
• Station or Cable TV experiencing problems, tune to another station.  
• Station signal is weak, reorient antenna to receive stronger station.  
• Check for sources of possible interference.  
15  
14  
35  
Poor reception on some  
channels.  
Station or Cable TV experiencing problems, tune to another station.  
15  
18  
17  
14  
35  
• Make sure channels are set into memory.  
• Check picture control adjustments.  
Poor color or no color.  
• Check antenna or Cable TV connections, reorient antenna.  
• Check for sources of possible interference.  
Station or Cable TV experiencing problems, tune to another station.  
15  
18  
• Make sure channels are set into memory.  
• Cable TV company is scrambling signal.  
• Check antenna orientation.  
Picture wobbles or drifts.  
No Cable TV reception.  
14  
• Check all Cable TV connections.  
14  
18  
15  
• Set Signal Type option to the “Cable” mode.  
• Station or Cable TV system problems, try another station.  
Horizontal or diagonal  
bars on screen.  
• Check antenna connections, reorient antenna.  
14  
• Check for sources of possible interference.  
35  
No reception above  
• Make sure Signal Type option is in the appropriate mode.  
• If using antenna, check UHF antenna connections.  
18  
14  
channel 13.  
• No broadcast on station tuned.  
15  
16  
TV shuts off.  
• Sleep Timer is set.  
• Power interrupted.  
• TV station experiencing problems or program tuned is not closed  
15  
14  
21  
17  
16  
captioned. Try another channel.  
Closed Caption is not  
activated.  
• Check Cable TV connection or VHF/UHF antenna, reposition or  
rotate antenna.  
• Set Closed Caption in the menu.  
Display is not shown in  
your language.  
Cannot delete E-POP.  
• Select proper language in the menu options.  
• Set the “E-POP Demo” in the Auto Setup menu to “Off”.  
REMOTE CONTROL  
• Aim at the remote control at the remote sensor.  
• Operate within approx. 15 feet or reduce the light in the room.  
• Clear the path of the beam.  
The remote control does  
not function.  
13  
• The batteries are weak. Replace the batteries.  
Check the batteries are inserted correctly.  
• The LCD panel is a very high technology product, giving you fine picture details. Occasionally, a few non-  
active pixels may appear on the screen as a fixed point of blue, green or red. Please note that this does not  
affect the performance of your product.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN 36  
Problems and troubleshooting  
SYMPTOMS  
POSSIBLE SOLUTIONS  
PAGE  
DVD  
• No disc is inserted.  
23  
9
Playback doesn’t start or  
disc ejects automatically.  
• The disc may be dirty. Clean up the disc.  
• The disc is scratched or warped.  
• The unit cannot play CD-ROMs, etc.  
9
9
No picture.  
No sound.  
• TV/DVD selector is not set correctly.  
23  
• Check the input selector of the amplifier is set properly.  
• The unit is in the Special playback mode.  
24  
33  
• Select the correct Audio Output position on AV amplifier.  
Picture is distorted during  
CUE or REVIEW.  
Stopping playback,  
search, slow-motion play,  
repeat play, or program  
play, etc. cannot be  
performed.  
• The picture will be distorted occasionally.  
• Some discs may not allow some functions.  
• The setup does not match your stereo system.  
No surround sound.  
33  
13  
The unit or remote  
operation key is not  
functioning.  
Turn off the unit and unplug the AC power cord for several minutes,  
then replug it.  
Playback does not start  
when the title is selected.  
Audio soundtrack and/or  
subtitle language is not  
changed when you play  
back a DVD.  
• Check the Parental Lock setup.  
30  
25  
• Multilingual language is not recorded on the DVD disc.  
• Some discs have no subtitles.  
No subtitle.  
25  
25  
• Subtitles are cleared. Press SUBTITLE.  
Angle cannot be changed. • Multi-angles are not recorded on the DVD disc.  
“This operation can’t be  
performed” appears on the • The function is prohibited with the unit or the disc.  
screen.  
23  
FCC Declaration of Conformity Compliance Statement (Part 15):  
The Sansui SLEDVD249, LED-LCD HDTV with DVD player complies with Part 15 of the FCC rules.  
Operation is subject to the following two conditions: (1) this device may not cause harmful  
interference, and (2) this device must accept any interference received, including interference  
that may cause undesired operation.  
The party responsible for compliance to these rules is:  
ORION AMERICA,INC.  
1105 SOUTH MAIN STREET PRINCETON, INDIANA 47670,U.S.A  
Ph: 1-800-289-0980  
Download from Www.Somanuals.com. All Manuals Search And Download.  
37 EN  
Specifications  
GENERAL  
Power supply:  
AC 120V, 60Hz  
Power consumption:  
Operation: 42W  
Stand by: 0.7W  
Weight:  
4.0 kg (8.8lbs )  
Dimensions:  
Width: 550 mm (21-21/32 inches)  
Height: 349mm (13-24/32 inches)  
Depth: 137mm (5-25/64 inches)  
5˚C - 40˚C  
Operating temperature:  
Operating humidity:  
Less than 80% RH  
TELEVISION  
Type:  
599.4mmV (class 24 inches/23.6 inches diagonal)  
Transmission TFT color LCD panel  
1366 (H) x 768 (V)  
Display method:  
Number of Pixels:  
Tuner type:  
US system M  
ATSC standard (8VSB), QAM  
Receiving channels:  
VHF  
2-13  
UHF  
CATV  
14-69  
14-36 (A)-(W)  
37-59 (AA)-(WW)  
60-85 (AAA)-(ZZZ)  
86-94 (86)-(94)  
95-99 (A-5)-(A-1)  
100-135 (100)-(135)  
01 (4A)  
Inputs:  
Video:  
Audio:  
(RCA) 1 V (p-p), 75 ohms  
(RCA) –8 dBm/50k ohms  
Component video:  
(Y) 1 V (p-p), 75 ohms  
(Pb)/(Pr) 0.7 V (p-p), 75 ohms  
HDMI:  
HDMI compliant (type A connector)  
HDCP compliant  
E-EDID compliant  
Suggested scan rates: 480i, 480p, 720p,1080i,1080p  
HDMI Audio: 2-channel PCM  
32/44.1/48 kHz sampling frequency  
16/20/24 bits per sample  
PC Monitor:  
Mini-Dsub 15pin  
Antenna: VHF/UHF In 75 ohms coaxial  
Output:  
Digital audio out:  
0.5 V (p-p), 75 ohms terminated  
Speakers:  
25.4 mm x 68.6 mm (1 inch x 2-11/16 inches), 8 ohms x 2  
2.0W + 2.0W  
Audio output power:  
DVD/CD player  
Signal system:  
Applicable disc:  
NTSC  
1.DVD (12 cm)  
2.CD (12 cm)  
Pickup:  
CD:  
Wavelength: 790 nm  
Maximum output power: 7 mW  
DVD: Wavelength: 655 nm  
Maximum output power: 5 mW  
ACCESSORIES  
Remote control  
Batteries (AAA) x 2  
Stand  
Screws 4x16mm (3/16 x 5/8 inches) x4  
Designs and specifications are subject to change without notice.  
FOR CUSTOMER SERVICE, ADDITIONAL SET-UP AND OPERATING ASSISTANCE, OR TO ORDER ACCESSORIES PLEASE CALL:  
1-800-289-0980  
WHEN CALLING CUSTOMER SERVICE PLEASE HAVE YOUR MODEL NUMBER READY  
OR WRITE TO:  
ORION SALES, INC.  
3471 N. UNION DR.  
OLNEY, ILLINOIS 62450  
FOR INFORMATION ON OUR OTHER PRODUCTS, TO ORDER ACCESSORIES ONLINE,  
OR FOR RECYCLING INFORMATION, PLEASE VISIT OUR WEBSITE AT  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN 38  
limited  
WARRANTY  
24” CLASS LED-LCD HDTV WITH DVD PLAYER  
ORION warrants this product to be free from manufacturing defects in material and workmanship under  
normal use and conditions for a period of 1 year from date of original purchase in the United States.  
Should service be necessary under this warranty for any reason due to a manufacturing defect or  
malfunction during the first 12 months from date of original purchase, ORION will provide carry-in service  
only by an ORION authorized Independent Service Center at no charge. Also, if an original part fails due to  
manufacturing defect in material and workmanship within one year from date of original purchase we will replace  
the defective part, provided the defect or malfunction is verified along with dated proof of purchase.  
There are ORION authorized Independent Service Centers located throughout the country. For the one  
be liable for damages incurred in shipment of the unit. If there are no ORION authorized Independent Service  
Centers in your area please call - 1-888-296-7466 for assistance.  
Note:This warranty is void if the product is:  
(a) Damaged through negligence, misuse, abuse, or accident.  
(b) Used in a commercial application or rentals.  
(c) Modified or repaired by anyone other than an Independent Service Center authorized by ORION to effect  
warranty repairs to the class of product or by the ORION Factory Service Center.  
(d) Damaged because it is improperly connected to the equipment of other manufacturers.  
This warranty does not cover:  
(a) Damage to video disc.  
(b) Damage to equipment not properly connected to the product.  
(c) Costs incurred in the shipping of the product to an ORION authorized Independent Service Center or  
ORION Factory Service Center.  
(d) Damage or improper operation of unit caused by customer abuse, misuse, negligence, or failure to follow  
operating instructions provided with the product.  
(e) Ordinary adjustments to the product which can be performed by customer as outlined in the owner’s  
manual.  
(f) Signal reception problems caused by external antenna or cable systems.  
THIS WARRANTY IS NON TRANSFERABLE AND APPLIES ONLY TO THE ORIGINAL PURCHASER  
AND DOES NOT EXTEND TO SUBSEQUENT OWNERS OF THE PRODUCT. ANY APPLICABLE IMPLIED  
WARRANTIES, INCLUDING THE WARRANTY OF MERCHANTABILITY, ARE LIMITED IN DURATION TO A  
PERIOD OF THE EXPRESS WARRANTY AS PROVIDED HEREIN BEGINNING WITH THE DATE OF ORIGINAL  
PURCHASE AT RETAIL AND NO WARRANTIES, WHETHER EXPRESS OR IMPLIED SHALL APPLY TO THIS  
PRODUCT THEREAFTER. ORION MAKES NO WARRANTY AS TO THE FITNESS OF THE PRODUCT FOR  
ANY PARTICULAR PURPOSE AND USE.  
UNDER NO CIRCUMSTANCES SHALL ORION BE LIABLE FOR ANY LOSS, DIRECT, INDIRECT,  
INCIDENTAL, SPECIAL, OR CONSEQUENTIAL DAMAGE ARISING OUT OF OR IN CONNECTION WITH THE  
USE OF THIS PRODUCT.  
THIS WARRANTY IS VALID ONLY IN THE UNITED STATES OF AMERICA. THIS WARRANTY GIVES YOU  
SPECIFIC LEGAL RIGHTS, HOWEVER, YOU MAY HAVE OTHER RIGHTS WHICH MAY VARY FROM STATE  
TO STATE. SOME STATES DO NOT ALLOW LIMITATION ON IMPLIED WARRANTIES OR EXCLUSION OF  
CONSEQUENTIAL DAMAGE, THEREFORE THESE RESTRICTIONS MAY NOT APPLY TO YOU.  
ORION SALES, INC.  
3471 N. UNION DR.  
OLNEY, ILLINOIS 62450  
Download from Www.Somanuals.com. All Manuals Search And Download.  
39 EN  

Ramsey Electronics Headphones SHA2 User Guide
Raymarine Marine GPS System Marine GPS System User Guide
RCA CRT Television J13805CL User Guide
RCA Projection Television HDTV DVD Monitor User Guide
Ricoh All in One Printer DSm616 User Guide
RIDGID Cordless Saw R844 User Guide
Rosewill Network Card RC201 User Guide
Samsung Air Conditioner E S F DB98 05586A User Guide
Sanyo Battery Charger HR 3URS User Guide
SECO LARM USA TV Converter Box MVA VH01Q User Guide