RCR-2
Operating instruction
GB
WARNING:
TO PREVENT FIRE OR ELECTRIC SHOCK HAZARD, DO
NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.
CAUTION
RISK OF ELECTRIC
SHOCK DONOTOPEN
!
CAUTION: TO REDUCE THE
RISK OF ELECTRIC
THE EXCLAMATION
POINT WITHIN THE
TRIANGLE IS A WARN-
ING SIGN ALERTING
YOU OF IMPORTANT
INSTRUCTIONS
THE LIGHTNING
FLASH AND ARROW-
HEAD WITHIN THE
TRIANGLE IS A WARN-
ING SIGN ALERTING
YOUOF “DANGEROUS
VOLTAGE” INSIDE THE
RADIO.
SHOCK, DO NOT REMOVE
THE BACK, NO USER SER-
VICEABLE PARTS INSIDE.
REFERSERVICING TO
QUALIFIEDSERVICE PER-
SONNEL.
ACCOMPANYING THIS
RADIO.
Download from Www.Somanuals.com. All Manuals Search And Download.
10. Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the point
where they exit from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
GB
12. Use only with the cart, stand, tripod, bracket, or table specified by
the manufacturer, or sold with the apparatus. When a cart is
used, use caution when moving the cart/apparatus combination
to avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or when unused for
long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is
required when the apparatus has been damaged in any way,
such as power-supply cord or plug is damaged. liquid has been
spilled or objects have fallen into the apparatus, the apparatus
has been exposed to rain or moisture, does not operate
normally, or has been dropped.
15. To Reduce the Risk of Fire or Electric Shock, Do not Expose
This Appliance To Rain or Moisture.
16. The Shock Hazard Marking and Associated Graphical Symbol is
provided on the bottom panel of unit.
17. Apparatus shall not be exposed to dripping or splashing and no
objects filled with liquids, shall not be placed on the apparatus.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Main features
( 1 ) 14 station memories ( 7 each on AM/FM bands )
( 2 ) Digital radio controlled clock with date display
Date and time displays are checked and if necessary corrected daily
with an exact radio controlled time antenna signal
( 3 ) Nap timer
Adjustable from 10-120 minutes
( 4 ) Alarm with Humane Wake System ( HWS )
The alarm begins quietly and gradually becomes louder before
switched off ( buzzer alarm only )
( 5 ) Radio alarm
Woken up by the favorite station
( 6 ) Two independent alarm functions
( 7 ) Alarm week day selection
( 8 ) Adjustable alarm level ( buzzer alarm only )
( 9 ) Headphone jack
(10) Time Zone adjustment (PST , MST , CST , EST )
3
Download from Www.Somanuals.com. All Manuals Search And Download.
GB
4
Download from Www.Somanuals.com. All Manuals Search And Download.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Controls
1
Power on/off and Sleep timer
Nap timer
2
3
4
5
6
7
8
9
Display button to display time and radio frequency
Display backlight on/off button
Buzzer alarm level adjustment
RESET
GB
Time zone adjustment
Date adjustment
Time adjustment
10
11
Alarm 2 button
Alarm 1 button
12
Headphones socket
13
14
Time/Date/Alarm set button
LCD display
15
16
17
Tuning Up/Down and Snooze button
Station memories and alarm week days selection
AM/FM band and alarm mode selection also Daylight Saving
Time (D.S.T.) set .
18
19
Volume control
External Antenna for radio controlled clock
6
Download from Www.Somanuals.com. All Manuals Search And Download.
LCD display
A
Radio band and a.m./p.m. display
Time set
B
C
D
E
F
G
H
I
Daylight Saving Time (D.S.T.)
Alarm indicator
Sleep timer
Nap timer
Alarm a.m./p.m. indicator
Date
Week day
J
Month/Date/Year/alarm time
Radio controlled symbol
Station memory number and second indicator
Minute ( for Nap and Sleep timer )
Frequency/Time display
K
L
M
N
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes on safety
Only operate this appliance with a power supply of 110-120 Volt/
50-60 Hz . If you intend not using the appliance for a longer period of
time ( eg. Holidays), pull the plug out of the mains socket to ensure a
complete separation from the power supply.
GB
Protect the appliance from heat and moisture.
Do not open the appliance and if it should require servicing, please
refer to a licensed electrical workshop.
Operation
Atomic clock operation
The Sangean RCR 2 consists of a crystal controlled clock movement
which includes a very special AM radio receiver that is tuned to
receive the 60kHz WWVB time signal broadcast from the U.S.
Government’s Atomic Clock in Boulder, Colorado. The signal is an
AM radio signal and as such is susceptible to weather conditions,
electrical interferences, solar conditions and the position of the
clock’s antenna all of which effects the receiver’s reception. As a
general rule, best reception is at night and just before or after sunrise
or sunset.Although the clock can work in most locations the number
of times that it adjusts itself to the U.S. Atomic Clock’s time signal
may depend on its location. Under certain weather conditions or in
areas of poor reception it may take 48 hours or more to receive a
signal for the correct time. In some cases it may be necessary to
seek another location in order to receive a useable time signal.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Set time Zone Switch [7] located on bottom of clock to your correct
zone as illustrated.
After theATS program completes the AM/FM frequency set up the
following display — : — will appear and the symbol
will blink
indicating the radio is searching for the radio controlled signal.
Once the radio receives the radio controlled signal the correct time
and date will be set automatically. Once the correct time and date
have been set, the
symbol will stop blinking but the symbol will
remain on the display indicating that the time and date have been
set utilizing the radio controlled signal. The analog clock will follow
the radio controlled signal.
Manual time setting
TIME
Press TIME button, display will flash
and previous allocated time.
Press SET button, the Hour digits in the time display begin to blink
with a beep.
1.Adjust the hour with key + or - .
2. Press the SET button once again to confirm the hour, now the
minute digits in the time display begin to blink.
Adjust the minutes just as you adjusted the hour:
1. Set the minutes with key + or -.
2. Press the TIME button once again to confirm the time setting with
a beep.
The second starts to count. The symbol will appear indicating this
is not radio controlled time.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Note:
If there is Daylight Saving Time ( D.S.T.) system in your place,
after pressing SET button, press Mode button once will
advance one hour on time setting, Display will show D.S.T.
symbol indicating the time is under D.S.T. status.
GB
DATE
Press DATE button, displayDATE will blink. Press SET button,
display will blink year with a beep and a small Y (year) will appear,
1. Set the year with key + or -.
2. Press SET button again and follow the setting of year to set the
month and date .
3. Confirm DATE setting by pressingDATE button again.
Now the display will show time, date, week day, second and
symbol .
You can always adjust the time manually whenever is required by
following above procedures.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Radio operation
Turn on the radio with the Power on/off key 1.
Tune into desired stations
Manual station selection
1. With the key 15 Tuning + and -, you can tune into the frequency of
your desired stations.
2. Scanning tuning
Press and hold key 15 + or – for more than 0.5 seconds and
release, the radio will search for the next station.
Storing the preset stations
Tune into the stations.
Select a memory preset button and press for more than 2 seconds
until a confirmed beep sounds and display M stops blinking. The
station is now stored.
Note:
When you store a new station in a memory slot, the station
previously in that slot is automatically erased.
Recall the station memories
Recall the station memories, simply select the required bands and
press required station memory slot buttons 1-7.
Volume
You can select the required volume by adjusting the Volume control
button 18.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Alarm Clock
Alarm setting can be done while the appliance power is during on or
off position.
The alarm clock is equipped with two alarm systems which can be
operated independently of each other either with Human Wake
System buzzer or with a radio (radio alarm clock ).
GB
Alarm with radio
1. Select the desired station by station memory button 1-7 or simply
tune the radio station.
2. Set the desired radio alarm volume.
3. Select alarm system 1 or 2 by pressing the alarm 1 or 2 button.
Display will blink selected alarm system symbol.
4. Press alarm SET button 13, display will blink both alarm hour and
alarm mode with a beep.
5. Press alarm Mode button 17 to select alarm radio mode until
display shows
.
6. Press + or – to adjust required alarm hour then press SET button
again, display minute digits will blink. Press + or – button to adjust
required alarm minute.
7. Press week day selection 1-7 ( Sunday – Saturday ) to select
required alarm week day. Display will show the days of the week
on which you wish to be woken by the alarm.
8. Press alarm button 1 or 2 to confirm all the alarm set with a beep.
Display will show
indicating radio alarm is set.
Note:
If the alarmed week day(s) or alarm mode is not selected,
display will blink all the week days or show for a few
seconds indicating the alarm is not set and disappear,
the alarm will not be activated.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Note:
If you like to be awoken by the radio station you are listening,
press Alarm system 1 or 2 for more than 2 seconds, the
appliance will store the radio alarm station, then follow above
procedures 2-8 to set radio alarm.
Alarm with HWS alarm buzzer
1. Select alarm system 1 or 2 by pressing the alarm 1 or 2 button
(11 or 10). Display will blink selected alarm system symbol.
2. Press alarm SET button 13, display will blink both alarm hour and
alarm mode with a beep.
3. Press alarm mode button 17 to select alarm buzzer mode until
display shows
.
4. Press + or – to adjust required alarm hour then press SET button
again, display minute digits will blink. Press + or – button to adjust
required alarm minute.
5. Press week day selection 1-7 ( Sunday – Saturday ) to select
required alarm week days. Display will show the days of the week
on which you wish to be woken by the buzzer alarm.
6. Press alarm button 1 or 2 to confirm all the alarm set with a beep.
Display will show
indicating HWS buzzer alarm is set .
Note:
If the alarm week day (s) is not selected, display will blink all the
week days and , the alarm will not be activated.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Cancel alarm setting.
If you do not wish to be woken up at the alarm time you have set,
you can cancel the alarm function.
1. Select alarm system 1 or 2 by pressing the alarm 1 or 2 button
(key 11 or 10).
GB
2. Press SET button , the alarm mode symbol will blink with a beep.
3. Press alarm MODE button 17 one or two times (depending you
were in alarm radio or alarm buzzer status ) till display blink
4. Press alarm 1 or 2 button again to confirm alarm cancellation.
.
The
symbol will stay on the display for around 2 seconds
and disappear.
Note:
You may also select days of the week which you wish to be or not to
be woken after pressing SET button while display is blinking days of
the week. Press 1-7 ( Sunday – Saturday ) of button 16 for selection.
Snooze
To interrupt the alarm signal ( radio or beep tone/HWS), press the
Snooze button 15. The alarm stops and begins again with interval of
5 minutes. The alarm will continue for an hour if not being interrupted.
Stop the alarm signal
To stop the alarm signal totally, press button 1 Power on/off.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Nap timer
With key 2, you can select the period for the short term alarm in
10 minutes steps from 10-120 minutes.
The Nap timer starts when you release the key. NAP will appear on
display. The alarm signal sounds after the period of time which you
have set.
If you wish to turn off theNap timer before the time is up, simply
adjust the number of minutes by pressingNAP key to OFF and
release. NAP will disappear from display.
When Nap timer signal is on, turn off the timer signal by pressing
key 1 Power on/off.
You can also activate the snooze function as described above.
SLEEP – auto shut off
Continuously pressing the Power button 1 will activate the sleep
function, the radio will switch off automatically in 15 minutes step
from 15-120. The Sleep control begins when you release the key
and display will appear. After the minutes which selected, the radio
turns itself off automatically. If you wish to turn off the radio
beforehand, press Power on/off button 1.
Headphones
The radio provides a Headphones socket to connect the
headphones set. When plug in the headphones, the speaker
is disconnected.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Alarm level adjustment
With alarm level adjustment switch 5, you may select required alarm
signal level.
Note:
GB
Alarm level adjustment works only for buzzer alarm.
Display backlight on/off
Key 4 provides you to select whether you require to illuminate
the display.
Time zone switch
Time Zone Switch [7] should be set to zone where clock/radio is to
be used.
Troubleshooting /RESET
If the radio fails to operate correctly or some digits on the display are
missing or incomplete, carry out the following procedures.
1. With the aid of a suitable implement (the end of a paper clip),
press the RESET button 6 for a few seconds, this will reset the
microprocessor, clock time and clear all the stations stored in
preset memory .
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Technical data
Power supply
110-120 Volt/50-60 Hz
800 mW max
Output Power
Power consumption 7W (max.).
Frequency coverage FM 87.50 - 108 .0 MHz
AM 520 - 1710 kHz
Technical data subject to changes without prior notice.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
381J412A
Download from Www.Somanuals.com. All Manuals Search And Download.
|