Digital Color Dome Camera
User’s Guide
SCC-B535x(S)
Download from Www.Somanuals.com. All Manuals Search And Download.
EXPLANATION OF
SAFETY RELATED SYMBOLS
CAUTION
RISK OF ELECTRIC
SHOCK DO NOT OPEN
The lighting flash and
Arrowhead within Triangle is
a warning sign alerting you of
dangerous voltage inside the
product.
CAUTION: TO REDUCE THE RISK
OF ELECTRIC SHOCK, DO NOT
REMOVE REAR COVER. NO USER
SERVICEABLE PARTS INSIDE. REFER
TO QUALIFIED SERVICE PERSONNEL.
The explanation point within
the triangle is a warning sign
alerting you of important
instructions accompanying the
product.
This symbol indicates high voltage
3. Do not connect multiple cameras to a
single adapter. Exceeding the capacity
may cause abnormal heat generation or
fire.
is present inside. It is dangerous to
make any kind of contact with any
inside part of this product.
4. Securely plug the power cord into the
power receptacle. Insecure connection
may cause fire.
5. When installing the camera, fasten it
securely and firmly. A falling camera may
cause personal injury.
6. Do not place conductive objects (e.g.
screwdrivers, coins, metal things, etc.) or
containers filled with water on top of the
camera. Doing so may cause personal
injury due to fire, electric shock, or falling
objects.
7. Do not install the unit in humid, dusty, or
sooty locations. Doing so may cause fire
or electric shock.
This symbol alerts you that important
literature concerning operation and
maintenance has been included with
this product.
To prevent damage which may result in fire
or electric shock hazard, do not expose this
appliance to rain or moisture.
WARNING
1. Be sure to use only the standard adapter
that is specified in the specification
sheet. Using any other adapter could
cause fire, electrical shock, or damage
to the product
2. Incorrectly connecting the power
supply or replacing battery may cause
explosion, fire, electric shock, or damage
to the product.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
8. If any unusual smells or smoke come
from the unit, stop using the product. In
such case, immediately disconnect the
power source and contact the service
center. Continued use in such a condition
may cause fire or electric shock.
9. If this product fails to operate normally,
contact the nearest service center. Never
disassemble or modify this product
in any way. (SAMSUNG is not liable
for problems caused by unauthorized
modifications or attempted repair.)
7. Avoid aiming the camera directly towards
extremely bright objects such as sun,
as this may damage the CCD image
sensor.
FCC Statement
This device complies with part 15 of the FCC
Rules. Operation is subject to the following
two conditions:
1) This device may not cause harmful
interference, and
10. When cleaning, do not spray water
directly onto parts of the product. Doing
so may cause fire or electric shock.
2) This device must accept any interference
received including interference that may
cause undesired operation.
Note
CAUTION
This equipment has been tested and found to
comply with the limits for a Class A digital device,
pursuant to part 15 of FCC Rules. These limits
are designed to provide reasonable protection
against harmful interference when the equipment
is operated in a commercial environment. This
equipment generates, uses, and can radiate
radio frequency energy and, if not installed
and used in accordance with the instruction
manual, may cause harmful interference to radio
communications. Operation of this equipment
in a residential area is likely to cause harmful
interference in which case the user will be
required to correct the interference at his own
expense.
1. Do not drop objects on the product or
apply strong shock to it. Keep away from
a location subject to excessive vibration
or magnetic interference.
2. Do not install in a location subject to
high temperature (over 122°F, 50°C),
low temperature (below 14°F, -10°C), or
high humidity. Doing so may cause fire
or electric shock.
3. If you want to relocate the already
installed product, be sure to turn off the
power and then move or reinstall it.
4. Remove the power plug from the
outlet when then there is a lightning.
Neglecting to do so may cause fire or
damage to the product.
5. Keep out of direct sunlight and heat
radiation sources. It may cause fire.
IC Compliance Notice
This Class A digital apparatus meets
all requirements of the Canadian
interference-Causing Equipment
Regulations of ICES-003.
6. Install it in a place with good ventilation.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
1. Read Instructions – All the safety and
operating instructions should be read
before the product is operated.
2. Retain Instructions – The safety and
operating instructions should be retained
for future reference.
9. A product and cart combination should
be moved with care. Quick stops,
excessive force, and uneven surfaces
may cause the product and cart
combination to overturn.
3. Heed Warnings – All warnings on the
product and in the operating instructions
should be adhered to.
4. Follow Instructions – All operating and
use instructions should be followed.
5. Cleaning – Unplug this product from the
wall outlet before cleaning. Do not use
liquid cleaners or aerosol cleaners. Use
a damp cloth for cleaning.
6. Attachments – Do not use attachments
not recommended by the product
manufacturer as they may cause
hazards.
7. Water and Moisture – Do not use this
product near water – for example, near
a bath tub, wash bowl, kitchen sink, or
laundry tub; in a wet basement; or near
a swimming pool; and the like.
8. Accessories – Do not place this product
on an unstable cart, stand, tripod,
10. Ventilation – Slots and openings in the
cabinet are provided for ventilation and to
ensure reliable operation of the product
and to protect it from overheating, and
these openings must not be blocked or
covered. The openings should never be
blocked by placing the product on a bed,
sofa, rug, or other similar surface. This
product should not be placed in a built-in
installation such as a bookcase or rack
unless proper ventilation is provided or
the manufacturer’s instructions have
been adhered to.
bracket, or table. The product may fall,
causing serious injury to a child or adult,
and serious damage to the product.
Use only with a cart, stand, tripod,
bracket, or table recommended by the
manufacturer, or sold with the product.
Any mounting of the product should
follow the manufacturer’s instructions,
and should use a mounting accessory
recommended by the manufacturer.
11. Power Sources – This product should
be operated only from the type of power
source indicated on the marking label.
If you are not sure of the type of power
supply to your home, consult your
product dealer or local power company.
For products intended to operate from
battery power, or other sources, refer to
the operating instructions.
12. Grounding or Polarization – This product
may be equipped with a polarized
4
Download from Www.Somanuals.com. All Manuals Search And Download.
alternating-current line plug (a plug
having one blade wider than the other).
This plug will fit into the power outlet
only one way. This is a safety feature.
If you are unable to insert the plug fully
into the outlet, try reversing the plug.
If the plug should still fail to fit, contact
your electrician to replace your obsolete
outlet. Do not defeat the safety purpose
of the polarized plug. Alternate Warnings
– This product is equipped with a three-
wire grounding-type plug, a plug having
a third (grounding) pin. This plug will only
fit into a grounding-type power outlet.
This is a safety feature. If you are unable
to insert the plug into the outlet, contact
your electrician to replace your obsolete
outlet. Do not defeat the safety purpose
of the grounding-type plug.
connected to the product, be sure the
antenna or cable system is grounded so
as to provide some protection against
voltage surges and built-up static
charges. Article 810 of the National
Electrical Code, ANSI/NFPA 70, provides
information with regard to proper
grounding of the mast and supporting
structure, grounding of the lead-in wire
to an antenna discharge unit, size
of grounding conductors, location of
antenna-discharge unit, connection to
grounding electrodes, andrequirements
for the grounding electrode.
ANTENNA LEAD
IN WIRE
GROUND
CLAMP
13. Power-Cord Protection – Power-supply
cords should be routed so that they are
not likely to be walked on or pinched
by items placed upon or against them,
paying particular attention to cords at
plugs, convenience receptacles, and the
point where they exit from the product.
14. Protective Attachment Plug – The
product is equipped with an attachment
plug having overload protection. This is
a safety feature. See Instruction Manual
for replacement or resetting of protective
device. If replacement of the plug is
required, be sure the service technician
has used a replacement plug specified
by the manufacturer that has the same
overload protection as the original plug.
ANTENNA
DISCHARGE UNIT
(NEC SECTION S10-20)
ELECTRIC
SERVICE
EQUIPMENT
GROUNDING CONDUCTORS
(NEC SECTION S10-21)
GROUND CLAMPS
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H)
NEC - NATIONAL ELECTRICAL CODE
16) Lightning – For added protection for this
product during a lightning storm, or when
it is left unattended and unused for long
periods of time, unplug it from the wall
outlet and disconnect the antenna or
cable system. This will prevent damage
to the product due to lightning and
power-line surges.
15. Outdoor Antenna Grounding – If an
outside antenna or cable system is
5
Download from Www.Somanuals.com. All Manuals Search And Download.
17) Power Lines – An outside antenna
system should not be located in the
vicinity of overhead power lines or other
electric light or power circuits, or where it
can fall into such power lines or circuits.
When installing an outside antenna
system, extreme care should be taken
to keep from touching such power lines
or circuits as contact with them might be
fatal.
18) Overloading – Do not overload wall
outlets, extension cords, or integral
convenience receptacles as this can
result in a risk of fire or electric shock.
19) Object and Liquid Entry – Never push
objects of any kind into this product
through openings as they may touch
dangerous voltage points or short-out
parts that could result in a fire or electric
hock. Never spill liquid of any kind on the
product.
that are covered by the operating
instructions as an improper adjustment
of other controls may result in damage
and will often require extensive work
by a qualified technician to restore the
product to its normal operation,
e) If the product has been dropped or
damaged in any way, and
f) When the product exhibits a distinct
change in performance – this indicates a
need for service.
22) Replacement Parts – When replacement
parts are required, be sure the service
technician has used replacement parts
specified by the manufacturer or have
the same characteristics as the original
part. Unauthorized substitutions may
result in fire, electric shock, or other
hazards.
23) Safety Check – Upon completion of any
service or repairs to this product, ask
the service technician to perform safety
checks to determine that the product is
in proper operating condition.
24) Wall or Ceiling Mounting – The product
should be mounted to a wall or
ceiling only as recommended by the
manufacturer.
25) Heat – The product should be situated
away from heat sources such as
radiators, heat registers, stoves, or
other products (including amplifiers) that
produce heat.
20) Servicing – Do not attempt to service this
product yourself as opening or removing
covers may expose you to dangerous
voltage or other hazards. Refer all
servicing to qualified service personnel.
21) Damage Requiring Service – Unplug this
product from the wall outlet and refer
servicing to qualified service personnel
under the following conditions:
a) When the power-supply cord or plug
is damaged,
b) If liquid has been spilled, or objects
have fallen into the product,
c) If the product has been exposed to
rain or water,
d) If the product does not operate
normally by following the operating
instructions. Adjust only those controls
Apparatus shall not be exposed to
dripping or splashing and no objects
filled with liquids, such as vases,
shall be placed on the apparatus
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Overview.......................................................................................
8
About this guide ............................................................................8
Product overview...........................................................................8
Main features .................................................................................8
Components...................................................................................8
Checking components in the package .......................................8
Components of your camera......................................................9
Installation ................................................................................ 10
Setting switches ..........................................................................10
Setting function switches..........................................................10
Connecting cables and changing the settings.........................12
Installing camera .........................................................................13
Before installation.....................................................................13
Installation procedure...............................................................13
Adjusting the camera direction..................................................14
Appendix A: Specifications for NTSC Standard................ 15
Appendix B: Specifications for PAL Standard .............................16
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Overview
About this guide
This user guide includes basic instructions for
the product. It is recommended that all users
read this guide before use.
Components
❚
❚
Checking components in the package
Please check your camera and accessories
are included in the package. Those
components are as shown below:
This guide is divided as follows:
Chapter 1, “Overview,” introduces the user guide
and product related information. (This chapter)
Chapter 2, “Installation,” explains how to set and
install the product.
Appendix, “Specifications,” provides the
specifications of the product.
Product overview
❚
Camera
Test Monitor Cable
User’s Guide
This is the high resolution (540 TV lines) dome
camera equipped with a Vari-focal lens, which
has no dynamic delay when implementing
motion pictures, and provides the features
such as digital noise reduction (DNR) by real-
time CCD defect compensation, low speed
shutter (LSS: Auto x128) to implement clear
picture quality, Day/Night color compensation,
and the like.
Tab screw
Note
The test monitor cable is used to test the camera
by connecting to a portable display. If you really
want to connect the camera to a monitoring
display, use the BNC cable.
Main features
Power: DC 12V/AC 24V
Special functions
❚
Line lock (LL) control
Auto white balancing
Horizontal/vertical image reversing
Flickerless control
Low shutter speed control
Backlight compensation control
Automatic switching between color and black
& white modes
Equipped with vari-focal lens
Auto Iris function
Digital noise reduction (DNR)
Dynamic CCD defect compensation
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Components of your camera
Your camera has the following components:
1. Cover dome: Covers the inner cover, lens, and main
body to protect them.
1
2
2. Inner cover: Covers the main body to protect it.
3. Wing locker: Push a long thin screwdriver into its
narrow spot and press it outward when you want to
remove the inner cover.
3
4. Main body: Includes a lens, a switch board, a PCB
board, screws, and such.
4
5
5. Mount bracket: Used as a ceiling or wall fixture. It
is fixed using three long tab screws provided in the
package.
6. Ceiling mount opener: Remove it for line connection
to the ceiling when it is installed on the ceiling.
7. Zoom lever: Using this lever, the lens zoom can be
adjusted and fixed.
6
8. Focus lever: The lens focus can be adjusted by
rotating it left or right. Rotate it clockwise for fixing.
Lens
@
9. Tilt fixing screw: Using this screw, the slope of the
lens can be adjusted and fixed.
10. Switch board: Includes two kinds of control switches
such as function switches and phase-control switches.
The board has eight function switches in the middle
and two phase-control buttons on each side of the
function switch area.
7
8
11. Groove mark: To attach the Main body to the Mount
bracket, align this groove mark on the Main body with
the wide groove in the CAMERA FRONT side on the
Mount bracket.
9
0
!
#
12. Locker: Used to open or close the Cover dome. To
open the cover dome, press the locker.
13. Lock releaser: Push it outward and rotate the main
body in UNLOCK direction when you want to remove
the Mount bracket from the Main body or to remove
the installed camera from the Mount bracket.
14. Cable: Connect the Video connector to BNC cable
and Power connector to power adapter.
Video connector
Power connector
$
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
Setting switches
❚
Setting function switches
To set the available functions on your camera, adjust eight switches as shown below:
No
1
Name
LL
Brief description
Line lock ON/OFF
DEC
8
7
6
5
4
3
2
1
2
LSS
Sens-up or Low speed shutter ON/OFF
Horizontal reverse ON/OFF
Vertical reverse ON/OFF
3
H-REV
V-REV
BLC
4
5
Backlight compensation ON/OFF
Flickerless ON/OFF
6
FL
Automatic switching between color and
black & white ON/OFF
7
8
D/N
AWB
Automatic white balance ON/OFF
INC
1. Switch 1 (LL): When this switch is set to OFF, the camera operates in the internal
synchronization mode, while when it is set to ON, the camera operates in the line lock mode.
In the internal synchronization mode, the camera always uses an inside crystal oscillator for
synchronization. However if multiple cameras are connected to a sequential switcher, picture
rolling or flickering may occur when switching from one camera to another. In this case, you
can set this switch to ON to solve this problem.
The line lock mode allows the camera to use the phase of the AC power as the
synchronization reference. In this mode, you can use the phase control buttons(INC/DEC).
Note
When you are using the DC 12V power, set this switch to OFF. The line lock feature will not normally
operate even when the switch is set to ON.
Set the LL switch to ON while the AC power is connected. If any picture roll happens, you have
to adjust the phase using the phase-control buttons. Press the INC or DEC button to increase or
decrease the phase by one degree.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Switch 2 (LSS): This sens-up mode accumulates the image fields in memory to reduce
noise but increase the brightness and contrast rate. When this switch is set to ON, the
camera automatically switches to a maximum of 128 times of image acquisition speed to
implement a clear picture for darker image.
3. Switch 3 (H-REV): When this switch is set to ON, the camera image is reversed horizontally.
If you want to monitor your site using a mirror, you can use this feature to see the right
image.
4. Switch 4 (V-REV): When this switch is set to ON, the camera image is reversed vertically.
If your camera reluctantly displays the vertically reversed image, you can use this feature to
see the right image.
5. Switch 5 (BLC): When this switch is set to ON, you can view a clear image even though the
camera faces any excessive light such as sunlight and fluorescent light. When it is set to
OFF, the subject with excessive light is not clearly shown.
6. Switch 6 (FL): When this switch is set to ON, the shutter speed is fixed to 1/100 sec (for
NTSC) or 1/120 sec (for PAL) to prevent screen from flickering by the disaccordance
between vertical synchronous frequency (50Hz for NTSC, 60Hz for PAL) and on-and-off
frequency of a light.
7. Switch 7 (D/N): When this switch is set to ON, the camera automatically switches between
color and B&W according to the brightness of the vicinity.
8. Switch 8 (AWB): This switch adjusts white balancing. When this switch is set to ON, this
camera operates in ATW mode, and in case of OFF, this camera operates in AWC mode.
ATW (Auto Tracking White Balance): The color temperature is automatically adjusted according to the
environmental change. (Approx. 2000°K to 11,000°K)
AWC (Auto White Balance Control): It stores the color temperature just when the switch is changed to
OFF. Accordingly color temperatures are adjusted by the stored value.
Caution
-. The IRIS setting range for the camera is approximately 80 to 120 IRE. It means the camera does not
provide the IRIS full open/close feature but the restricted variation range.
-. Use the camera after setting to the proper level (80 IRE or above) because the IRIS hunting may
occur when the level is 75 IRE or below.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting cables and changing the settings
Before installing your camera, you have to adjust the lens focus, zoom, and switch settings.
❚
To connect cables
1. Connect the BNC cable
to the Video connector
attached on your camera.
2. Connect the BNC cable
to the Video Input on a
monitor.
Monitor
3. Connect the power adapter
to the Power connector
attached on your camera.
When the monitor is turned
on, the camera image
appears.
BNC Cable
To adjust the lens focus, zoom, and function settings
1. Remove the Cover dome and Inner cover. For more details about the removing procedures,
see “Installation procedure,” in the Installing camera section on the next page.
2. Adjust the focus, zoom, and function settings of your camera using the Focus lever, Zoom
lever, and Switch board while you are viewing the image on the screen.
3. If you want to fix the adjusted focus and zoom, screw up the levers.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing camera
Before installation
❚
Before installing your camera, you have to read the following cautions:
You have to check whether the location (ceiling or wall) can bear five times the weight of your camera.
Don’t let the cable to be caught in improper place or the electric line cover to be damaged. Otherwise it
may cause a breakdown or fire.
When installing your camera, don’t allow any person to approach the installation site. If you have any
valuable things under the place, move them away.
Installation procedure
To install your camera
1
1. Press the Locker button on the bottom of your
camera and remove the Cover dome from the Main
body using the other hand. The Main body and Inner
cover will be exposed to you.
2. To install and adjust your camera, you have to first
remove the Inner cover. To remove the Inner cover
from the Main body, push a long thin screwdriver
into the narrow spot of the Wing locker and press it
outward to remove the cover.
3. Remove the Mount bracket from the Main body by
rotating the Main body in the UNLOCK direction while
pushing the Lock releaser outward. If it is not easily
done, rotate the Mount bracket in the LOCK direction
while holding small holes on the Mount bracket.
2
4
3
4. Fix the Mount bracket to the location (ceiling or wall)
with supplied three screws.
Note
Ceiling mount
opener
The CAMERA FRONT sign on the Mount bracket
should face the camera monitoring area.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
5. When you install the Mount bracket on the ceiling, remove the Ceiling mount opener by pressing
it hard to connect the line attached on your camera through the hole in the ceiling. Otherwise, you
can use the empty space opposite to the CAMERA FRONT sign for line connection.
6. Now attach the Main body to the Mount bracket by rotating it in the LOCK direction after aligning
the Groove mark on the Main body with the wide groove around the CAMERA FRONT inlay.
7. Adjust the camera direction. For more details on the direction control, see “Adjusting the camera
direction,” on the same page. When required to adjust the zoom and focus for your camera, see
“Connecting cables and changing the settings,” on page 10.
8. Attach the Inner cover to the Main body by pressing it until a “click” sound is heard after aligning
two screw holes on the Wing lockers of the Inner cover with two screw holes on the Main body’s
left and right sides.
9. Finally attach the Cover dome to the Main body by pressing it until a “click” sound is heard after
aligning the bump inside the Cover dome with the Groove mark on the Main body.
Adjusting the camera direction
❚
When the camera is fixed on the ceiling, you can adjust
the camera viewing angle. You can rotate your camera
leftward or rightward (Panning), and can change the slope
of your camera upward or downward (Tilting).
Panning
In case of panning, the rotation limit of your camera is
set to 355 degree (100 degree clockwise and 255 degree
counterclockwise). The rotation is stopped by the Stopper
inside of the camera. For panning control, first unfasten
two screws located on the bottom and rotate in the
direction you want, and then fasten them to fix the camera.
Tilting
In case of tilting, you can change the slope of your camera
from zero to 90 degree. However if the slope angle is
under 17 degree, you can encounter a partial image hide
Lens rotation
problem. To fix the location after adjusting the tilting angle, use the Tilt fixing screws.
To adjust the focus and zoom of your camera, use the Zoom lever and Focus lever. When
you install the camera on the inclined ceiling or wall, you can rotate the camera lens to see
a correct direction image.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix A: Specifications for NTSC Standard
Item
Product type
Details
CCTV color dome camera
Power input
AC 24V ± 10% (60Hz ± 0.3 Hz), DC 12V +10%/-5%
NTSC Standard System (525 Lines, 60 Fields)
Approx. 1.7W
Broadcast type
Power consumption
Image device
1/3 inch IT Type Super-HAD CCD
Total: 811(H) x 508(V), 410,000 pixels
Effective: 768(H) x 494(V), 380,000 pixels
Pixels
Scanning mode
Scanning line frequency
525 Lines, 2:1 Interlace
Horizontal: 15.734Hz(INT)/15.750Hz(LL)
Vertical: 59.94Hz(INT)/60Hz(LL)
Synchronization mode
Horizontal resolution
INT/Line Lock (Adjusting the phase using INC/DEC button)
540 TV Lines
SCC-B53X3 (Color/BW)
0.4/0.04Lux
0.24/0.024Lux
SCC-B53X2 (Color/BW)
0.4/0.4Lux
50IRE
30IRE
15IRE
50IRE
30IRE
15IRE
Sens-up Off
0.24/0.24Lux
Min. object illumination
0.12/0.012Lux
0.12/0.12Lux
F1.2
0.0031/0.00031Lux
0,0019/0.00019Lux
0.0009/0.00009Lux
0.0031/0.0031Lux
0.0019/0.0019Lux
0.0009/0.0009Lux
Sens-up x128
Signal output
Lens
COMPOSITE Video(1.0 Vp-p, 75ohm, BNC), Test Monitor OUT(1.0 Vp-p, 75ohm, Harness cable)
Auto Iris (DC) / Focal length: 2.5 to 6.0mm / Aperture ratio: 1.2
PAN function
TILT function
Range: 0 to 355° (100 degree clockwise and 255 degree counterclockwise)
Range: 0 to 90°
Line Lock (LL)
Sens-Up; Low Speed Shutter(LSS)
Horizontal Reverse (H-REV)
Vertical Reverse (V-REV)
Backlight compensation (BLC)
Flickerless (FL)
Controls
Switching between color and B&W modes (D/N)
Auto white balancing (AWB)
Digital noise reduction (DNR)
Dynamic CCD defect compensation
Product color
SCC-B535xN : White / SCC-B535xSN : Dark Silver
Operation temperature
Operation humidity
Size
-10°C to +50°C
Up to 90%
128(Ø) x 91(H)mm
327g
Weight
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix B: Specifications for PAL Standard
Item
Product type
Details
CCTV color dome camera
Power input
AC 24V ± 10% (50Hz ± 0.3 Hz), DC 12V +10%/-5%
PAL Standard System (625 Lines, 50 Fields)
Approx. 1.7W
Broadcast type
Power consumption
Image device
1/3 inch IT Type Super-HAD CCD
Total: 795(H) x 596(V), 470,000 pixels
Effective: 752(H) x 582(V), 440,000 pixels
Pixels
Scanning mode
Scanning line frequency
625 Lines, 2:1 Interlace
Horizontal: 15.625Hz(INT)/15.625Hz(LL)
Vertical: 50Hz(INT)/50Hz(LL)
Synchronization mode
Horizontal resolution
INT/Line Lock (Adjusting the phase using INC/DEC button)
540 TV Lines
SCC-B53X3 (Color/BW)
0.4/0.04Lux
0.24/0.024Lux
SCC-B53X2 (Color/BW)
0.4/0.4Lux
50IRE
30IRE
15IRE
50IRE
30IRE
15IRE
Sens-up Off
0.24/0.24Lux
Min. object illumination
0.12/0.012Lux
0.12/0.12Lux
F1.2
0.0031/0.00031Lux
0,0019/0.00019Lux
0.0009/0.00009Lux
0.0031/0.0031Lux
0.0019/0.0019Lux
0.0009/0.0009Lux
Sens-up x128
Signal output
Lens
COMPOSITE Video(1.0 Vp-p, 75ohm, BNC), Test Monitor OUT(1.0 Vp-p, 75ohm, Harness cable)
Auto Iris (DC) / Focal length: 2.5 to 6.0mm / Aperture ratio: 1.2
PAN function
TILT function
Range: 0 to 355° (100 degree clockwise and 255 degree counterclockwise)
Range: 0 to 90°
Line Lock (LL)
Sens-Up; Low Speed Shutter(LSS)
Horizontal Reverse (H-REV)
Vertical Reverse (V-REV)
Backlight compensation (BLC)
Flickerless (FL)
Controls
Switching between color and B&W modes (D/N)
Auto white balancing (AWB)
Digital noise reduction (DNR)
Dynamic CCD defect compensation
Product color
Operation temperature
Operation humidity
Size
SCC-B535xP : White / SCC-B535xSP : Dark Silver
-10°C to +50°C
Up to 90%
128(Ø) x 91(H)mm
327g
Weight
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
|