Vacuum
Cleaner
SU-8500 Series
FOR HOUSEHOLD USE ONLY
Operating
Instructions
IMPORTANT SAFETY INSTRUCTIONS .......................2
VACUUM CLEANER DISCRIPTION ...........................3
VACUUM CLEANER ASSEMBLY...............................4
CARTON CONTENTS .................................4
ACCESSORIES .........................................4
ATTACH HANDLE TO VACUUM.....................4
ATTACH HANDLE TO DIRT CUP ...................4
ATTACH VACUUM HOSE AND TOOLS ...........5
OPERATION..........................................................6
POWER SWITCH/BRUSH ROLL SWITCH
(CIRCUIT BREAKER)..................................6
HANDLE POSITIONS..................................6
POWERFOOT HEIGHT ADJUSTMENT ...........7
EDGE CLEANING ......................................7
CLEANING TOOLS.....................................7
POWER CORD ARRANGEMENT ..................8
CORD CLIP..............................................8
TRANSPORTING CLEANER.........................8
CARRYING CLEANER ................................8
MAINTENANCE .....................................................9
DIRT CUP CHECK OR FILTER CLOGGED INDICATOR ..
9
CLEANING DIRT CUP.................................9
CLEANING THE CARTRIDGE FILTER TANK ....9
CLEANING THE HEPA MEDIA POST-MOTOR FILTER ..9
CHECK ROTATING FLOOR BRUSH AND DRIVE BELT 10
REPLACE DRIVE BELT.............................10
CLEARING CLOGS ..................................11
POWERED HAND TOOL(TURBINE BRUSH)..12
BRUSHBAR REPLACEMENT......................12
BELT REPLACEMENT...............................12
TROUBLE SHOOTING...........................................13
❈ The design and specification may be different depending on the models.
Download from Www.Somanuals.com. All Manuals Search And Download.
Vacuum Cleaner Description
Assembled Vacuum Cleaner Parts
HANDLE
COMFORT GRIP
ON/OFF POWER CONTROL SWITCH
CORD CLIP
BRUSH ROLL
ON/OFF
SWITCH
DUSTING BRUSH
QUICK RELEASE
CORD WRAP
UPHOLSTERY
BRUSH
TOOL COVER
POWERED
HAND TOOL
HOSE CLIP
POWER CORD
CARRYING
HANDLE
SUCTION INLET
FOR HOSE
CHECK
CARTRIDGE
FILTER TANK
FILTER
INDICATOR
LOUVERS/FILTER
FRAME
HEPA MEDIA
POST-MOTOR FILTER
HOSE
DIRT CUP
CREVICE TOOL
DIRT CUP
HANDLE
DIRT CUP
RELEASE
LEVER
EXTENSION
WAND
HANDLE
RELEASE
PEDAL
HEIGHT
ADJUSTMENT
KNOB
POWERFOOT
(BRUSH ROLL)
FURNITURE
GUARD
HOSE WAND BASE
Front
Back
CAUTION:
WARNING:
Do not plug in your vacuum
cleaner until you are familiar
with all instructions and
operating procedures.
Plastic film can be dangerous.
To avoid danger of suffocation,
keep away from babies
and children.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Vacuum Cleaner Assembly
Carton contents
Accessories
C
D
E
F
G
H
A
B
The accessories are packed on the cleaner.
Not all accessories are included with every model.
Empty carton. Find the parts shown above
before disposing of packing materials.
A. Handle section(with 4 screws)
B. Cleaner body
C. Hose
D. Extension wand
F. Powered hand tool
(Turbine Brush)
E. Crevice tool
G. Dusting Brush
H. Upholstery Brush (Furniture nozzle)
Attach Handle To Vacuum
Stand the vacuum upright and slide the base of the
handle firmly into the grooves at the top of the
vacuum body.
1
Check to be sure the handle is fitted to the cleaner
body. If there is a gap in front, continue to push
firmly until the handle is flush.
2
3
Insert the two screws provided into the existing
holes. Tighten the screws securely with a
screwdriver. Before securing the handle, please
check that the handle is fitted to the vacuum body
and there’s no gap between them. If there is a gap
or the screw is loosened, cleaner won’t turn on.
Attach Handle To Dirt Cup
The dirt cup assembly consists of the following parts;
* Dirt Cup (A)
* Dirt Cup Handle (B)
Unlock the dirt cup from the cleaner body.
1
2
3
Insert the dirt cup handle into the dirt cup as shown.
Press firmly until it locks in place.
B
A
Insert the dirt cup into the cleaner body and lock.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Vacuum Cleaner Assembly
Attach Vacuum Hose and Tools
Wrap the cord around hooks
for storage. The top hook
rotates right or left for easy
cord release.
Attach the hose with two screws
from the assembly packet. Tighten
securely them with a screw driver.
Snap the hose into the hose clip as
shown.
1
2
3
NOTE: The powerfoot will not operate
effectively unless the Hose is firmly
attached to the base.
Slide the extend wand into the
storage clip. Insert the crevice tool
into the nook.
Snap in the Dusting brush and
insert upholstery brush into the
storage clip as shown.
4
5
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation
Power Switch/Brush Roll Switch(Circuit Breaker)
The power control slide switch is located on the front of the handle.
This switch also allows you to control the cleaning power.
O F F
O F F
Plug cord into electrical outlet.
1
2
To turn cleaner ON(I), slide the power switch up. To turn
cleaner OFF(O), slide the power switch down. The
headlight turns on when in use.
The brush roll switch is located on the side of the cleaner body. This switch turns the
rotating brush on and off. The brush switch should be in the ON(I) position for normal
carpet cleaning. You may want to turn the brsuh switch OFF(O) for bare floor cleaning
or other delicate surfaces.
Turn brush roll switch OFF(O) to clean hard surface floors.
Turn brush roll switch ON(I) to clean carpet and rugs.
The brush rolls will automatically turn off when the handle is in the upright position.
NOTE: Your SAMSUNG vacuum is equipped with a special internal switch that
turns the Rotating Brush off whenever the unit is in the Upright position.
BRUSH ROLL SWITCH
(CIRCUIT BREAKER)
Circuit Breaker(Reset Switch)
The Circuit breaker turns off the brush rolls if there is an obstruction in them. The circuit breaker combining ON/OFF switching and
extremely fast overload performance in a rocker switch. Under overload conditions, an internal neon (filament bulb for low voltages)
illuminates to give a cleaner signal of the tripped status of the mechanism and thereby the cause of power interruption. Returning
the rocker switch through the OFF position and back ON will reset the mechanism and restore the supply.
The brush rolls will not turn, but the suction motor will continue to run. To reset the breaker, turn cleaner off and unplug it. Clear
obstruction. Press circuit breaker switch to the ON(I) position. Turn cleaner ON and continue cleaning.
Handle Positions
Select the desired angle of the cleaner using the handle release pedal.
The handle of your cleaner has three positions.
Step on the handle release pedal on the back of the cleaner base.
1
A
Raise or lower the handle and release the pedal.
2
B
A. Upright:
For storage and elevated cleaning with cleaning tools.
B. Medium position:
For general operation on carpet and floors.
C. Low position:
Use for reaching under low furniture. Step on handle release
lever to lower handle.
C
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation
Powerfoot Height Adjustment
The powerfoot on your SAMSUNG vacuum can be adjusted to clean several floor
surfaces.
NOTE : For optimal cleaning performance, adjust to the lowest practical
setting. If your cleaner is difficult to push, adjust to the next higher setting.
Place Handle in Upright Position.
1
Turn Height Adjustment Knob to desired setting.
2
Lowest Setting - For bare floors.
Medium Settings - For short and medium pile carpets.
Highest Setting - For plush pile carpet.
NOTE : You may also adjust the setting while in the Medium position.
Edge Cleaning
The Edge Cleaning Feature helps the cleaner to clean edges of rugs and floors effectively, allowing suction to reach against walls and
near furniture.
Cleaning Tools
Attachment tools can be used to clean furniture, drapes, stairs, or in corners. Place the vacuum on the floor with the handle in the upright
position while using attachment tools. Do not place the vacuum on top of furniture or steps as the brushroller may cause damage.
Unhook hose (with cleaning tools attached) from the rear of the vacuum
1cleaner.
Place desired tool on end of narrow wand. Press firmly and twist to connect the
2
tool to the wand.
A. Dusting Brush:
Use for carved furniture, table tops, books, lamps, lighting fixtures,
venetian blinds, base boards, shutters and registers.
B. Crevice tool:
Use in corners, on stairs, baseboards, and behind furniture.
A
B
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation
C. Extension Wand:
Use with desired attachments and narrow wand for a longer
reach.
C
D. Powered hand tool (Turbine-Brush):
Use for upholstered furniture, carpeted stairs and hard-to-reach places.
D
E. Upholstery Brush:
Use for upholstered furniture, draperies, mattresses, clothing, automobile
interiors, and carpeted stairs.
E
Power Cord Arrangement
When you are done using your SAMSUNG vacuum, return it to the Upright position and store
the Power Cord.
Turn vacuum cleaner OFF(O).
1
Unplug Power Cord by grasping the polarized plug (Not the cord) and disconnect from outlet.
Loop Power Cord around Cord Wraps on side of vacuum cleaner.
Clip molded plug to Power Cord to secure.
2
3
4
Cord Clip
CORD CLIP
For easier handling while Vacuuming, hook the
power cord onto the power cord clip.
Transporting Cleaner
To move your cleaner from room to room, put handle in upright position,
tilt cleaner back on rear wheels and push forward.
Carrying Cleaner
Do not lift cleaner using dirt cup handle.(A)
The cleaner can be moved by using the carrying handle located on the back of the cleaner.
A
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Maintenance
Dirt-Cup check or Filter clogged Indicator
The Dirt-Cup check Indicator on the front of the vacuum shows a red or green display. When
the Dirt-Cup display is green, the Dirt-Cup is not yet full or the filter is not clogged. When the
indicator turns to red, the Dirt-Cup needs to be emptied or the filter needs to be cleaned.
If the display is still red after emptying the dust container, turn the cleaner off to
see if the hose, tube, or nozzle is clogged .
Cleaning the Dirt cup
Unplug the Cleaner from electrical outlet.
1
The Dirt cup can be reached by removing the Dirt cup, reaching underneath
the Upper Tank and turning the rim of the Filter Frame to unlock. Pull straight
down to remove. Brush the dirt off the Louvers and Dirt cup.
2
The foam Upper Tank Filter may be removed and hand washed in cold water
with mild detergent. Rinse well then air dry throughly before replacing.
3
Cleaning the Cartridge Filter Tank
Unplug the Cleaner from electrical outlet.
1
2
3
WARNING:
The Cartridge Filter Tank assembly can be reached by
pulling it from the cleaner.
Do not operate cleaner
with damp or wet filters
or without all filters in
place.
Remove the cover from the Cartridge Filter Tank, and
the foam may be removed and hand-washed in cold
water with mild detergent, then air dried.
Reposition Filters when completely dry.
4
Cartridge Filter Tank
Cleaning the HEPA Media Post-Motor Filter
Unplug the Cleaner from electrical outlet.
1
2
The HEPA Media Post-Motor Filter assists in the filtration process to return clean
air to the room. It is located behind the door on the side of the cleaner. If the filter
becomes dirty, open the door, remove the filter and clean. To remove this filter,
open the door on the side of the cleaner, grasp filter and pull it straight out.
HEPA Media Post-Motor Filter
WARNING:
Reposition the HEPA Media Post-Motor Filter, then lock the door.
To reduce the risk of injury
from moving parts, turn off
vacuum cleaner and
disconnect Power Plug
from electrical outlet.
3
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Maintenance
Check Rotating Floor Brush and Drive Belt
You should check your vacuum cleaner’s Rotating Floor Brush and Drive Belt regularly for
wear or damage. You should also clean the brush and brush ends of strings, hair, and carpet
fibers. These can wrap around the brush and hamper its ability to effectively clean your
carpet. Also remove any debris that has accumulated under the brush cover.
Unplug cleaner from electrical outlet.
1
Place handle in Low position.
2
Remove the four screws as shown with a screwdriver.
3
Turn over the cleaner.
4
Remove the eight screws, and turn over the cleaner again.
5
Lift the cover-Brush off.
6
Remove the three screws on the case-drum.
7
Grasp Rotating Floor Brush at both ends and lift.
8
Clean strings, hair and other debris from Rotating Floor Brush, paying particular
attention to brush ends.
9
Clean strings, hair and other debris from Motor Pulley and Drive Belt areas.
10
11
12
Check Drive Belt carefully for wear, cuts or stressed areas.
Check Air Passageway for obstructions. Remove debris from this area
.
Replace Drive Belt
Unplug cleaner from electrical outlet.
1
With Rotating Floor Brush removed from vacuum cleaner(Step1-7 of
Check Rotating Floor and Drive Belt) grasp old Drive Belt and remove from
Motor pully. Discard old Drive Belt.
2
Place new Drive Belt over motor pulley and stretch other end over rotating
Floor Brush in the space between the bristles.
3
4
5
6
Place ends of rotating Floor Brush down into slots on sides as shown.
Turn rotating Floor Brush by hand several times in direction of motor pulley,
if properly installed, Drive Belt will center itself.
Reposition Brush cover and eight screws. Tighten screws securely. Snap
end of Brush cover into place.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Maintenance
Clearing Clogs
Low suction or poor pickup may be due to a clog in the vacuum cleaner. If you notice a change in the
sound of the motor or a reduction in the spinning action, check for clogs.
Unplug cleaner from electrical outlet.
1
Empty Dirt Cup.
2
Check Case filter for build up or clogs.
3
4
5
6
7
Remove the Case filter and check the suction inlet for a clog.
Grasp the Quick Reach Handle and lift Hose Wand to separate from the
suction opening. Check for a clog in the Base, the Wand or the Hose.
Remove the screw attaching the Hose Wand Base to the vacuum.
Straighten the Hose Wand Base and unclog with long, narrow object.
Turn the vacuum cleaner off and unplug it. Remove the brush cover, check the air
passageway for obstructions. Remove debris from this area. Reposition brush
cover and eight screws. Tighten screws securely, snap end of brush cover into
place.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Maintenance
Powered hand tool(Turbine Brush)
*Brushbar Replacement
Remove the tool from the hose, and turn upside down. Slide the switch to unlock position
1
and remove bottom plate.
Unscrew the one screw and remove belt guard.
2
3
4
5
6
Remove brushbar including end plates and discard.
Inspect belt to ensure that it is in good condition. If broken or cracked, please replace.
(See below for details.)
With the curved ends facing down, slide end plates of brushbar into slots on the tool.
To replace bottom plate, insert the four tabs on edge of bottom plate into slots on front of
tool. Pivot bottom plate down and snap closed.
*Belt replacement
Grasp turbine and pull firmly to remove.
1
Remove a screw, and lift the cover belt off.
2
Remove belt from turbine pulley. Replace with new belt.
3
4
5
With flat sides of turbine retainers pointing down, slide retainers into grooves in tool
housing and snap into place.
Replace brushbar and bottom plate.
*Cleaning Brushbar
•Cut off pet hairs or threads surrounding brush by using scissors.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Check this list of possible problems and solutions before bringing your vacuum to a service center.
Problem
Possible solution
CLEANER WON’T TURN ON
• Plug unit in firmly.
• Not firmly plugged in.
• Check fuse or breaker.
• Replace fuse or reset breaker.
• Slide to on.
• No voltage in wall plug.
• Blown fuse or tripped breaker.
• On/Off switch not turned on.
• Tighten the screw of the handle.
CLEANER WON’T PICK UP
• Reset circuit breaker.
• Circuit breaker tripped.
• Agitator brush rolls worn.
• Dirt cup full.
• Replace brush rolls.
• Empty dirt cup.
• Move nozzle control knob to lower settings.
• Clear HEPA cartridge filter by either tapping the side
of the dirt cup.
• Incorrect carpet height setting.
• HEPA cartridge filter clogged.
• Clean pre-filter.
• Pre-filter clogged.
• Position dirt cup properly.
• Ensure that filter assembly is positioned properly.
• Clear blockage.
• Dirt cup not properly installed.
• Filter assembly not assembled properly.
• Blockage in hose(or air flow passage).
• Broken belt.
• Replace belt.
• Insert hose.
• Hose not inserted fully.
ABNORMAL SOUND
• Strange sound like air rushes
• Check for clogs.
This Vacuum cleaner is approved the following.
EMC Directive: 89/336/EEC, 92/31/EEC and 93/68/EEC
Low Voltage Safety Directive: 73/23/EEC and 93/68/EEC
13
Download from Www.Somanuals.com. All Manuals Search And Download.
DJ68-00237A REV(0.0)
Download from Www.Somanuals.com. All Manuals Search And Download.
|