Samsung Universal Remote PS 37S4A1 User Guide

Infrared Remote Control  
ENG  
TURNS THE PDP ON AND OFF  
WHEN YOU PRESS A BUTTON , ‘  
APPEARS ALONG WITH SELECTED MODE  
(TV, VCR, CATV, DVD OR STB) AND  
REMAINING BATTERIES ON LCD  
PICTURE EFFECT SELECTION  
MAKE THE REMOTE CONTROL WORKS  
FOR TV, VCR, CATV, DVD PLAYER, STB  
SOUND EFFECT SELECTION  
TELETEXT CANCEL  
DIRECT CHANNEL SELECTION  
AUTOMATIC SWITCH-OFF/  
TELETEXT SUB-PAGE  
PICTURE SIZE/  
TELETEXT SIZE SELECTION  
NEXT CHANNEL/  
TELETEXT NEXT PAGE/  
TELEWEB FORWARD  
VOLUME INCREASE  
EXTERNAL INPUT SELECTION/  
TELETEXT PAGE HOLD  
TEMPORARY SOUND SWITCH-OFF  
VOLUME DECREASE  
PREVIOUS CHANNEL/  
TELETEXT PREVIOUS PAGE/  
TELEWEB BACKWARD  
TELETEXT DISPLAY/  
MIX BOTH TELETEXT INFORMATION  
AND THE NORMAL BROADCAST  
INFORMATION DISPLAY/  
TELETEXT REVEAL  
TV MODE SELECTION  
EXIT TELETEXT  
EXIT TELEWEB  
MENU DISPLAY/  
TELETEXT INDEX  
(DEPENDING ON THE MODEL)  
MOVE TO THE REQUIRED  
MENU OPTION/  
ADJUST AN OPTION VALUE  
RESPECTIVELY  
PICTURE STILL  
CONFIRM YOUR CHOICE  
(STORE OR ENTER)  
TELEWEB DISPLAY  
(DEPENDING ON THE MODEL)  
SOUND MODE SELECTION  
TruSurround XT  
MODE SELECTION  
FASTEXT TOPIC SELECTION  
PIP FUNCTIONS;  
- PIP ACTIVATING OR DEACTIVATING  
(PIP ON)  
- SWAPPING THE MAIN AND THE SUB  
PICTURE (SWAP)  
- LOCATION SELECTION (POSITION)  
- SOURCE SELECTION (SOURCE)  
- SIZE SELECTION (SIZE)  
- SCAN  
REMOTE CONTROL SETUP  
- SELECTING THE CHANNEL OF SUB  
PICTURE (P  
)
IF YOUR REMOTE CONTROL IS NOT  
FUNCTIONING PROPERLY, TAKE  
OUT THE BATTERIES AND PRESS  
THE RESET BUTTON FOR ABOUT  
2~3 SECONDS. RE-INSERT THE  
BATTERIES AND TRY USING THE  
REMOTE CONTROL AGAIN.  
VCR/DVD FUNCTIONS;  
- REWIND (REW)  
- STOP  
- PLAY/PAUSE  
- FAST FORWARD (FF)  
The performance of the remote control may be affected by bright light.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connecting to the S-Video Input  
ENG  
The S-VIDEO and RCA (AUDIO-L/R) connectors are used for equipment with an S-Video output,  
such as a camcorder or VCR.  
Camcorder  
Rear of the TV  
and  
VCR  
To play picture and sound, both the S-VIDEO and RCA connectors must be used.  
Whenever you connect an audio or video system to your television,  
ensure that all elements are switched off. Refer to the documentation  
supplied with your equipment for detailed connection instructions  
and associated safety precautions.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connecting to the DVI Input  
ENG  
The “DVI” (video) and “L-AUDIO-R” connectors are used for equipment with a DVI output.  
Rear of the TV  
Personal Computer  
and  
Connecting to the PC Input  
The “RGB” (video) and “AUDIO” connectors are used for interfacing with your PC.  
Rear of the TV  
Personal Computer  
and  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connecting to the Component Input  
ENG  
Rear of the TV  
The “COMPONENT 1” connectors are  
used for equipment with a DVD output.  
(480i/480P/576i/576P/720P/1080i)  
DVD  
DTV receiver  
The “COMPONENT 2” connectors are  
used for DTV receiver.  
(480i/480P/576i/576P/720P/1080i)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connecting and Using the Home Theater System  
ENG  
Use the Monitor Out ports of the PDP for Home Theater System Connections.  
Rear of the TV  
Connecting the Home Theater System  
Connect the monitoring audio out L, and  
R jacks of the MONITOR OUT on the  
rear-side connection panel of the PDP  
TV to the AUDIO IN jacks of the DVD  
Home Theater System (or AV Receiver)  
using the audio cable.  
Press the SOURCE button to select the  
desired external device connected to the  
PDP TV.  
If you want to hear the sound through  
separate speakers, cancel the internal  
amplifier.  
DVD Home Theater  
AV Receiver Amplifier  
Refer to corresponding user’s manual from the manufacturer for wiring the  
speakers to the DVD Home Theater System (or AV Receiver).  
Disable the PDP TV internal speaker to enjoy the rich sound through the  
speakers of your Home Theater System.  
In this case, enjoy the sound from the Home Theater System while the PDP TV  
does not produce the audio.  
To Display the DVD Home Theater  
!
@
Turn the PDP on and press the SOURCE button to select the Ext.1 (or Ext.2, Ext.3).  
Be sure to connect the video cable properly if desired external input (Ext.1, Ext.2, or Ext.3)  
cannot be selected.  
#
$
Play the DVD after activating the DVD Home Theater System.  
Use the volume control of the Home Theater System while watching the PDP using the DVD  
Home Theater, where the PDP TV does not produce the audio.  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Radio Shack Robotics Mobile Robot User Guide
Rival Cooktop BD275 User Guide
Samson Headphones CR77 Receiver User Guide
Samson Projection Television L12000 User Guide
Samsung Washer DC68 02347B FR User Guide
Sanyo Battery Charger HR 4 5AUC User Guide
Sanyo Camcorder VPC CG9bk User Guide
SATO Label Maker M 10e User Guide
Seiko Watch 4F32 User Guide
Sennheiser Corded Headset HME 110 User Guide