Samsung Telephone SGH C327 User Guide

QUAD BAND Series  
SGH-C327  
Portable Digital Telephone  
User Manual  
Please read this manual before operating your phone, and keep it for  
future reference.  
Printed in Korea  
Code No.: GH68-11590A  
English 07/2006. Rev. 1.0  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Table of Contents  
i
Download from Www.Somanuals.com. All Manuals Search And Download.  
ii  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Audio ...................................................................................................... 65  
iii  
Download from Www.Somanuals.com. All Manuals Search And Download.  
iv  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Important Safety Precautions  
Please read these guidelines before using your wireless phone.  
Failure to comply with them may be dangerous or illegal.  
Road Safety at All Times  
Do not use a hand-held phone while driving; park the vehicle first.  
Switching Off When Refueling  
Do not use the phone at a refueling point (service station) or near  
fuels or chemicals.  
Switching Off in an Aircraft  
Wireless phones can cause interference. Using them in an aircraft is  
both illegal and dangerous.  
Switching Off in Hospitals  
Switch your phone off near medical equipment. Follow any  
regulations or rules in force.  
Interference  
All wireless phones may be subject to interference, which could  
affect their performance.  
Special Regulations  
Follow any special regulations in force in any area and always switch  
your phone off whenever it is forbidden to use it, or when it may  
cause interference or danger (for example, in a hospital).  
Important Safety Precautions  
1
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Sensible Use  
Use the phone only in the normal position (held to the ear). Avoid  
unnecessary contact with the antenna when the phone is switched  
on.  
Emergency Call  
Ensure the phone is switched on and in service. Key in the  
emergency number for your present location, then press the  
You must deactivate any unnecessary features before you can make  
an emergency call. Give all the necessary information as accurately  
as possible. Do not end the call until given permission to do so.  
key.  
Water Resistance  
Your phone is not water-resistant. Keep it dry.  
Accessories and Batteries  
Use only Samsung-approved accessories and batteries. Use of any  
unauthorized accessories could damage your phone and may be  
dangerous.  
Qualified Service  
Only qualified service personnel may repair your phone.  
For more detailed safety information, see “Health and Safety  
Important Safety Precautions  
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
Your Phone  
Features of Your Phone  
Your phone is lightweight, easy-to-use and offers many exciting  
features. The following list outlines a few of the features included in  
your phone.  
Text and multimedia messaging  
Bluetooth® wireless technology  
Voice recording capability  
Applications such as calendar, calculator, world time, converter,  
timer, and stopwatch.  
Phone Layout  
Closed View of Your Phone  
3. Antenna  
2. Power Interface  
Connector  
1. Front LCD  
1. Front LCD: Your phone has an external display on the front of the  
phone. It indicates when you have an incoming call or message. It  
also displays date, time, reception, battery power, and any icons  
associated with alerts, such as messages, or a set alarm.  
Your Phone  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
2. Power Interface Connector: The power interface connector is  
used to plug in the charging accessories.  
3. Antenna: Used to obtain maximum reception.  
Open View of Your Phone  
The following illustrations show the main elements of your phone:  
14. Earpiece  
1. Display  
13. Menu/OK key  
2. Headset jack  
3. Soft key (right)  
12. Navigation keys  
11. End key  
3. Soft key (left)  
4. Send key  
10. Clear key  
5.Volume key  
6.Voicemail key  
7. Alphanumeric keypad  
9. Microphone  
8. Special Function keys  
The following list correlates to the illustration:  
1. The Display screen displays the time and date, messages and  
numbers, as well as the current function of the left and right soft  
keys.  
Your Phone  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
2. The Headset jack is used to attach a headset to your phone.  
3.  
The Soft key (left) performs the function indicated by the screen  
text on the bottom line of the display above the key.  
The Soft key (right) performs the function indicated by the  
screen text on the bottom line of the display above the key.  
4. The Send key makes or answers a call.  
In Idle mode, the Send key recalls the last number dialed or  
received when held down.  
5. During a call, the Volume key adjusts the speaker or headset  
volume.  
In Idle mode with the phone open, the volume key adjusts the  
ring volume. With the phone closed, the volume key turns on the  
external display.  
6. In Idle mode, the  
key accesses voice mail when held down.  
7. The Alphanumeric keys enter numbers, letters, and some special  
characters.  
8. The  
key is used to enter special characters and perform  
various functions. In text entry mode, the  
key is used to  
change case. Press and hold the  
mode.  
key to switch to Symbol  
In Idle mode, press and hold the  
deactivate Quiet mode. In text entry mode, the  
key is used to activate/  
key is used to  
switch between the current text entry mode (Alphabet mode or T9  
mode) and Number mode.  
9. The Microphone is used during phone calls and voice recordings.  
10. The Clear key deletes characters from the display.  
Your Phone  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
11. The End key hangs up the phone to end a call. The end key also  
switches the phone on and off when held down.  
In Menu mode, the end key cancels your input and returns the  
phone to Idle mode.  
12. In Menu mode, the navigation keys scroll through the menus  
and Phonebook.  
In Idle mode, the navigation keys act as shortcuts, allowing you  
to access other menus directly. The shortcuts are:  
Press Up to access the Media menu.  
Press Right to  
access the  
Messages menu.  
Press Left to  
access the Call  
History menu.  
Press Down to open the Contact List.  
When entering text, the navigation keys move the cursor to the  
left or right, depending on which side you press.  
13. In Idle mode, the Menu/OK key opens up the main Menu.  
In Menu mode, the Menu/OK key selects the highlighted menu  
options.  
14. The Earpiece is used to listen to audio from your phone.  
Your Phone  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Display  
Display Layout  
The display has the following areas:  
Icons  
Text and graphics area  
Menu  
Internet  
Soft key function indicators  
Area  
Description  
Icons  
Displays various icons.  
Text and  
graphics area  
Displays messages, instructions and any  
information that you enter, such as the number you  
are dialing.  
Soft key  
indicators  
Shows the current functions assigned to the two  
soft keys.  
Icons  
Shows the received signal strength. The greater the  
number of bars, the stronger the signal.  
Appears when a new text message has been received.  
Your Phone  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Appears when a new voice mail has been received.  
Appears when a new multimedia message has been  
received.  
Appears when you set an alarm to ring at a specified time.  
Appears when there is no network coverage available.  
Appears when a call is in progress.  
Appears when you are connected to a WAP service.  
Appears when the Call Forwarding feature is active. For  
Appears when incoming call Alert Type is set to Vibration.  
Appears when an incoming call Alert Type is set to  
Vibration then Melody.  
Appears when an incoming call Alert Type is set to  
Vibration and Melody.  
Appears  
when Quiet Mode, Vibration All is active.  
Appears when Quiet Mode, Silent All is active.  
Appears when Bluetooth is active.  
Shows the level of your phone’s battery. The more bars you  
see, the more power you have remaining.  
Your Phone  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
Selecting Functions and Options  
The roles of the soft keys vary depending on the function you are  
currently using. The labels on the bottom line of the display just  
above each key indicate their current role.  
Menu  
Internet  
Press the Right soft key to  
access the Internet menu.  
Press the Left soft key for  
Menu mode.  
The Left soft key  
can be used in several different ways:  
In Idle mode, press to access the Menu.  
When using other features, such as the web browser, the left soft  
key performs a context-sensitive action, such as displaying the  
Options submenu. This action is shown in the bottom left corner of  
the Display Screen.  
The Right soft key  
can also be used in several different ways:  
In Idle mode, press to access the Internet. (See “Internet” on  
When using other features, such as the web browser, the right soft  
key performs a context-sensitive action such as displaying the  
Back option. This action is shown in the bottom right corner of the  
Display Screen.  
Your Phone  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
To  
Press the  
Back soft key or  
move up one level in the  
menu tree  
key.  
exit without changing the  
settings  
key.  
select the displayed  
function displayed or  
option  
Select soft key  
view the next function or  
highlight the next option  
on a list  
Down key or by pressing down on the  
volume key on the left side of the  
phone.  
move to the previous  
function or option on a list  
Up key or by pressing up on the  
volume key on the left side of the  
phone.  
In some functions, you may be asked for a password or PIN. Enter  
the code and press the OK soft key.  
Note: When you access a list of options, your phone highlights the current option. If,  
however, there are only two options, such as On/Off or Enable/Disable, your phone  
highlights the option that is not currently active so that you can select it directly  
Your Phone  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Backlight  
The backlight illuminates the display and the keypad. When you press  
any key or open the phone, the backlight turns on and remains on for  
a given period of time, depending on your setting in the Backlight  
menu (Menu 9.2.5). When no keys are pressed, the display dims and  
turns off after a specified length of time to conserve battery power.  
To specify the length of time the backlight is active, use the  
Backlight menu (Menu 9.2.5). See “Backlight” on page 90 for  
further details.  
Your Phone  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Getting Started  
Activating Your Phone  
When you subscribe to a cellular network, a plug-in SIM card loaded  
with your subscription details, such as your PIN and other optional  
services.  
Removing the Battery  
1. If necessary, power-off the phone by holding down the  
until the power-off image displays.  
key  
2. Remove the battery cover by pressing the battery cover tab down  
and holding it in position, then slide the battery cover down, as  
shown.  
Installing the SIM Card  
Important! The plug-in SIM card and its contacts can be easily damaged by scratches  
or bending. Use caution when inserting or removing the card and keep all SIM cards out  
of reach from children.  
Getting Started  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Make sure the gold contacts of the card face into the phone, then  
slide the SIM card into the socket.  
Removing the SIM Card  
To remove the SIM card, slide it away from the handset. See the  
following illustration.  
Installing the Battery  
1. Align the battery tabs with the slots at the bottom of the phone.  
2. Press the battery down until it clicks into place. Make sure that  
the battery is properly installed before switching on the phone.  
Getting Started  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
3. With the battery in position on the phone, place the cover back on  
the handset and slide it in until it clicks.  
Charging a Battery  
Your phone is powered by a rechargeable Li-ion battery. Use the  
travel adapter to charge the battery, and use only Samsung approved  
batteries and chargers.  
Note: You must fully charge the battery before using your phone for the first time. A  
discharged battery recharges fully in approximately 200 minutes. You can use the phone  
while the battery is charging, but this causes the phone to charge more slowly.  
1. Plug the connector of the travel adaptor into the jack on the side  
of the phone.  
2. Plug the adaptor into a standard AC wall outlet. When charging is  
finished, unplug the adaptor from the power outlet.  
Note: For connection to an electrical supply not located in North America, you must use  
an adaptor of the proper configuration for the power outlet. Use of the wrong adaptor  
could damage your phone and void your warranty.  
Getting Started  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
3. Press the buttons on both sides of the connector (1) and (2) pull  
the connector out.  
Note: You must unplug the adaptor before removing the battery from the phone during  
charging to avoid damage.  
Low Battery Indicator  
When the battery is weak and only a few minutes of talk time remain,  
a warning tone sounds and the “Recharge Battery” message repeats  
at regular intervals on the display. The backlight turns off to conserve  
the remaining battery power. When the battery level becomes too  
low, the phone automatically turns off.  
Switching the Phone On or Off  
1. Open the phone.  
2. Press and hold the  
key until the phone switches on.  
3. If the phone prompts you to enter the phone password, enter the  
password and press the OK soft key. It is preset to “00000000” at  
the factory. For further details, see “Change Password” on  
4. If the phone prompts you for a PIN, enter the PIN and press the  
OK soft key. For further details, see “PIN Check” on page 100.  
Getting Started  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
The phone searches for your network and, after finding it, the idle  
screen appears on the display. You can now make or receive a call.  
The display language is preset to Automatic and is dependent on  
the setting in the SIM as determined by your service provider. To  
change the language, use the Language menu (Menu 9.4.1). For  
5. When you wish to switch the phone off, press and hold the  
key until the power-off image displays.  
Getting Started  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Call Functions  
Making a Call  
When the idle screen displays, enter the phone number (with area  
code, if necessary), then press the  
key.  
Note: When you activate the Auto Redial option in the Extra Settings menu (Menu  
9.4.3), the phone automatically redials up to ten times when the person does not answer  
the call or is already on the phone. For carriers that automatically divert unanswered call  
to voice mail, the Auto redial feature will not provide useful service. See “Extra Settings”  
on page 93 for further details.  
Making an International Call  
1. Press and hold the  
key. The + character appears.  
2. Enter the country code, area code and phone number and press  
the key.  
Call Functions  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Correcting the Number  
To clear  
Press the  
the last digit  
displayed  
key.  
any other digit in the Left or Right key until the cursor is immediately  
number  
to the right of the digit to be cleared. Press the  
key. You can also insert a missing digit  
simply by pressing the appropriate key.  
the whole display  
key and hold it for more than one second.  
Ending a Call  
When you want to end your call, briefly press the  
the phone.  
key or close  
Redialling the Last Number  
The phone stores the numbers you have dialed, received or missed if  
the caller is identified. See “Call History” on page 42 for further  
details.  
To recall any of these numbers:  
1. If you have typed characters on the display, press either the Exit  
soft key or the  
key to return to Idle mode.  
2. Press the  
key to display your Call History. By default, the Call  
Log list is displayed, showing all numbers made, received or  
missed.  
Call Functions  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
3. Use the Up and Down keys to scroll through the numbers until  
the number you want is highlighted.  
To  
Press the  
dial the number  
key.  
edit the number  
Options soft key and select Save as  
Contacts. The number is displayed. For  
further details, see “Correcting the  
delete the number  
Options soft key and select Delete  
followed by Yes.  
delete all of the  
numbers in the Call  
History list  
Options soft key and select Delete All.  
For further details, see “Delete All” on  
Making a Call from Contact list  
You can store the phone numbers that you use regularly in the SIM  
card or the phone’s memory, which are collectively called Contact  
List. Simply select a name to recall the associated number. For  
Adjusting the Volume  
During a call, if you want to adjust the earpiece volume, use the  
Volume keys on the left side of the phone.  
Press the volume key up or down to increase or decrease the  
volume level.  
Call Functions  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Answering a Call  
When somebody calls you, the phone rings and displays the  
incoming call image. If the caller can be identified and is stored in  
your Contact list, the caller’s phone number or name is displayed.  
To answer a call  
1. If necessary, open the phone.  
Note: When a headset is used, the phone does not need to be opened.  
2. Press the  
call.  
key or the Accept soft key to answer the incoming  
When the Anykey Answer option in the Extra Settings menu  
(Menu 9.4.3) is activated, you can press any key to answer a  
call except for the  
key and the Reject soft key. See “Extra  
When the Open to Answer option in the Extra Settings menu  
(Menu 9.4.3) is activated, you can answer the call simply by  
opening the folder.  
To reject the call, press and hold one of the Volume keys , or  
press the Reject soft key or  
key.  
3. End the call by pressing the  
key.  
Note: You can answer a call while using the Contact list or menu features. After ending  
the call, the phone returns to the function screen you were using.  
Viewing Missed Calls  
When you are unable to answer a call, you can find out who called.  
The number of calls you missed is displayed on the idle screen  
immediately after a call is missed.  
Call Functions  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
To view the missed call immediately:  
1. Open the phone.  
2. Press the View soft key.  
The number for the most recent missed call displays, if available.  
To  
Press the  
scroll through the missed Up or Down key.  
calls  
call the number displayed  
key.  
edit the number  
Options soft key and select Save as  
Contacts. The number is displayed.  
For further details, see “Correcting  
delete the number  
Options soft key and select Delete  
followed by Yes.  
Saving a Missed Call Number  
Note: When the number for the missed call is not available, the Edit option does not  
display.  
1. Press the View soft key.  
2. Press the Up or Down key to highlight the number you wish to  
save and press the Options soft key.  
3. Select Save as Contacts and press the Select soft key.  
4. The number is displayed on-screen. Press the Save soft key.  
Call Functions  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5. Choose between the Phone, SIM and SIM (FDN) locations and  
press the Select soft key.  
If you selected Phone, use the up and down keys to select the  
phone category and press the Select soft key.  
6. Enter the Name or choose from the provided list and press the  
Save soft key.  
For more options on this function, see “Storing a Number in Idle  
Deleting a Missed Call  
1. Press the View soft key.  
2. Press the Up or Down key to highlight the number you wish to  
delete and press the Options soft key.  
3. Highlight the Delete option and press the Select soft key to  
delete the currently-highlighted calls.  
You can press the  
key at any time to exit the Missed Call feature.  
Note: You can access the Missed Call feature at any time by selecting the Missed Calls  
menu (Menu 1.1). For further details, see “Missed Calls” on page 42.  
Quiet Mode  
Quiet mode is convenient when you wish to stop the phone from  
making noise, such as when you are in a theater.  
In Idle mode, press and hold the  
key until the “Silent Mode  
Activated” message displays.  
To return to normal, press and hold the  
key until the “Silent  
Mode Deactivated” message displays.  
Call Functions  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Options During a Call  
Your phone provides a number of features that you can use during a  
call.  
In Call Options  
During a call, press the Options soft key to access the following:  
Loud Spkr On/Off: Allows you to enable the speakerphone option.  
Hold: Places the call on hold.  
New Call: places the current call on hold and allows you to enter  
and dial another number.  
Contacts: access the Contacts menu for phone information.  
Text Message: allows you to send a message from your inbox,  
outbox, or to create a new message.  
Mute Keys: Silences the key tones when on the call.  
Send DTMF: Sends DTMF (Dual Tone Multi-Frequency) tones to  
the contacts you have selected.  
If you are in a multi-party call, the following options also display.  
Join: Joins the current call into the multiparty call.  
End Held Call: Ends the call that is placed on hold.  
When you want to finish, end each call normally by pressing the  
key.  
Hold  
You can place the current call on hold whenever you want. You can  
make another call while you have a call in progress if your network  
supports this service.  
To place a call on hold, simply press the Options soft key and  
select Hold. You can reactivate the call whenever you want, by  
pressing the Resume soft key.  
Options During a Call  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
To make a call while you have a call in progress:  
1. To place a call on hold, simply press the Options soft key and  
select Hold. Your current call is placed on hold.  
2. Enter the phone number that you wish to dial.  
Press the  
on hold.  
key to dial the second call. The first call is placed  
When you have an active call and another call on hold, you may  
switch between the two calls, placing the active call on hold.  
Simply press the Swap soft key.  
3. When you want to finish, end each call by pressing the  
key.  
Making a Multi-party Call  
A multi-party call is a network service that allows up to six people to  
take part simultaneously in a multi-party or conference call.  
Note: Please contact your service provider to determine if multi-party calling is  
supported.  
Setting up the Multi-party Call  
1. Call the first participant in the normal way.  
2. Call the second participant in the normal way. The first call is  
automatically put on hold.  
3. To join the first participant to the multi-party call, press the  
Options soft key and select the Join option. Press the Select soft  
key.  
4. To add a new person to the multi-party call, call the person in the  
normal way and press the Options soft key. Select the Join option  
and press the Select soft key.  
Options During a Call  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
You can also add incoming callers by answering the call, pressing  
the Options soft key, and selecting the Join option. Repeat as  
required.  
Having a Private Conversation with One Participant  
1. Press the Options soft key and select Split, and press the Select  
soft key.  
You can now talk privately to that person. The other participants can  
still converse with each other.  
2. To return to the multi-party call, press the Options soft key and  
select the Join option. Press the Select soft key.  
All the multi-party call participants can now hear each other.  
Dropping One Participant  
1. Press the Options soft key and select the Hold option and press  
the Select soft key.  
2. Press the Options soft key and select the Remove option and  
press the Select soft key.  
3. Highlight the number of the participant you wish to drop and  
press the Select soft key. The call ends with that participant.  
4. If necessary, press the Resume soft key to continue to talk to the  
others.  
5. When you want to end the multi-party call, press the  
key.  
Switching the Microphone Off (Mute)  
You can temporarily switch your phone’s microphone off so that the  
other person on the call cannot hear you. For example, you wish to  
say something to another person in the room but do not want the  
person on the call to hear you.  
Options During a Call  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
To switch the microphone off temporarily:  
Press the Mute soft key. The other person can no longer hear you.  
To switch the microphone back on:  
Press the Unmute soft key. The other person can hear you again.  
Muting or Sending Key Tones  
These options allow you to turn the key tones off or on. If the Mute  
keys option is selected, your phone does not transmit the DTMF  
(Dual Tone Multi-Frequency) tones of the keys, which allows you to  
press keys without hearing annoying key tones during a call.  
Note: To communicate with answering machines or computerized telephone systems  
using DTMF tones, the Send DTMF option must be selected.  
Sending a Sequence of DTMF Tones  
You can send the DTMF tones after entering the entire number you  
need to send. This option is helpful for entering a password or an  
account number when you call an automated system, like a banking  
service.  
To send the DTMF tones:  
1. When you are connected to the teleservice system, press the  
Options soft key.  
2. Press the Down key to highlight the Send DTMF option.  
3. Press the Select soft key.  
4. Enter the number you want to send and press the OK soft key. The  
tones are sent.  
Options During a Call  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Searching for a Number in the Contacts List  
You can search for a number in the Contact list during a call.  
1. Press the Options soft key.  
2. Press the Down key to highlight the Contacts option and press  
the Select soft key.  
3. Enter the name that you wish to find.  
If you enter the first few letters of the name, the Contact list entries  
are listed, starting with the first entry matching your input.  
4. To view the highlighted entry, press the  
key.  
For further details about the Contact list feature, see “Contacts” on  
Using Text Messages  
If you receive a text message during a call, the Message icon (  
flashes on the display.  
)
To view the message, press the Options soft key and select Text  
Message, followed by Inbox to display your list of text messages.  
For more information, see “Text Message” on page 47.  
You can use the Text Message menu (Menu 2.1.1) to write new  
text messages. For further details about writing a text message,  
To write a text message during a call, press the Options soft key  
and select Text Message. You can use the Text Message menu  
(Menu 2.1.1) to write new text messages. For further details about  
Call Waiting  
You can answer an incoming call while you have a call in progress, if  
your network supports this service and the Call Waiting option  
Options During a Call  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
             
(Menu 9.5.3) on your phone is set to Activate. For further details,  
To answer a call while you have a call in progress:  
1. Press the  
key or the Accept soft key to answer the incoming  
call. The first call is automatically put on hold.  
2. To switch between the two calls, press the Swap soft key.  
3. To end the call being held, press the Options soft key and select  
the End Held Call option.  
- or -  
To end the current call, press the  
key.  
Options During a Call  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Entering Text  
When using your phone, you will often need to enter text, such as  
when storing a name in the Contact list, creating your personal  
greeting or scheduling events on your calendar. You can enter  
alphanumeric characters by using your phone’s keypad.  
Your phone has the following text input modes:  
T9 mode: This mode allows you to enter words with only one  
keystroke per letter. Each key on the keypad has more than one  
letter; for example, when you press the  
key once, J, K or L  
displays. T9 mode automatically compares your keystrokes with an  
internal linguistic dictionary to determine the correct word, thus  
requiring far fewer keystrokes than the traditional Alphabet mode.  
Alphabet mode: this mode allows you to enter letters by pressing  
the key labeled with the letter you want. Press the key once, twice,  
three or four times until the desired character displays.  
Number mode: this mode allows you to enter numbers.  
Symbol mode: this mode allows you to enter various symbols and  
special characters.  
Changing the Text Input Mode  
When you are in a field that allows characters to be entered, you will  
notice the text input mode indicator near the bottom-right corner of  
the display.  
Eng  
Options  
Text Input  
Mode Indicator  
Entering Text  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Press the right soft key to move through the different types of text entry modes.  
Press  
to change case. Press and hold  
to switch to Symbol mode.  
Press and hold  
to switch between the current text entry mode (Alphabet mode  
or T9 mode) and Number mode.  
Using T9 Mode  
T9 is a predictive text input mode that allows you to key in any  
character using a single keystroke. This text input mode is based on a  
built-in dictionary. Your phone will select the most likely word based  
on your keystroke combinations.  
To enter a word in T9 mode:  
1. When you are in T9 mode, start entering a word by pressing the 2  
to 9 keys. Press each key only once for each letter.  
Example: To enter “HELLO” in T9 mode, press the  
and keys.  
,
,
,
The word that you are typing appears on the display. It may change  
with each key that you press.  
2. Enter the whole word before editing or deleting the keystrokes.  
3. When the word displays correctly, go to step 4.  
If the word displayed is not the one you want, press the  
key or  
the Up or Down key repeatedly to display alternative word choices for  
the keys that you have pressed.  
4. Insert a space by pressing the  
word.  
key and start entering the next  
To add a new word into the T9 dictionary:  
1. After pressing the keys corresponding to the word you want to  
add, press the  
key to display the alternative words.  
Entering Text  
30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
2. When you press the  
key on the last alternative word, the  
left soft key changes to Spell. Press the Spell soft key.  
3. If necessary, clear the word using  
and enter the word you  
want using Alphabet mode. See page 31.  
4. Press the OK soft key.  
The word is added to the T9 dictionary and becomes the first  
word for the associated key presses.  
To enter periods, hyphens or apostrophes, press the  
mode applies grammar rules to ensure that the correct punctuation  
is used.  
key. T9  
To shift the case in T9 mode, use the  
You can move the cursor by using the Left and Right keys. To  
delete letters, press . Press and hold to clear the display.  
key.  
Using Alphabet Mode  
Use the 0 to 9 keys to enter your text.  
1. Press the keys labeled with the letter you want:  
• Once for the first letter  
• Twice for the second letter  
• And so on  
2. Select the other letters in the same way.  
Note: The cursor moves to the right when you press a different key. When entering the  
same letter twice or a different letter on the same key, just wait for a few seconds for the  
cursor to move to the right automatically, and then select the next letter.  
Refer to the table below for further details about the characters  
available:  
Entering Text  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Characters in the OrderDisplayed  
UpperCase  
Key  
LowerCase  
( )  
( )  
space  
space  
To shift the case in Alphabet mode, use the  
key.  
You can move the cursor by using the Left and Right keys. To  
delete letters, press  
. Press and hold  
to clear the display.  
Entering Text  
32  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using Number Mode  
Number mode enables you to enter numbers into a text message.  
Press the keys corresponding to the digits you want to enter.  
Using Symbol Mode  
Symbol mode enables you to insert symbols into a text message.  
Press and hold the  
key access Symbol mode.  
To  
Press the  
select a symbol  
corresponding number key adjacent  
the symbol.  
display more symbols  
clear the symbol(s)  
Up or Down key.  
key.  
insert the symbol(s) into  
your message  
OK soft key.  
cancel your input and  
return to the previous  
mode  
Back soft key.  
Entering Text  
33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
Menus  
The navigation key on your phone allows you to scroll through  
menus quickly and easily. The scroll bar at the right of the menu  
keeps track of your position in the menu at all times.  
To navigate through a menu, simply press the navigation key up or  
down. If you are in a first-level menu, such as Settings, you may  
also navigate to the next menu by pressing the navigation key left  
or right.  
As you navigate through the menu, menu options are highlighted.  
Select any numbered option by simply pressing the corresponding  
number on the phone’s keypad. You may also select any item by  
highlighting it and pressing the Select soft key or the  
key.  
Accessing a Menu Function  
1. In Idle mode, press the Menu soft key to access Menu mode.  
From the Menu, do one of the following:  
Scroll using the Up, Down, Left and Right keys to reach a main  
menu, Settings for example. Press the Select soft key or the  
key to enter the highlighted menu.  
Press the number key beside the desired menu option. For  
example, for Settings, press  
.
2. If the menu contains sub-menus, Language for example, you can  
access them by scrolling using the Up or Down key and pressing  
the Select soft key or the  
key. Alternatively, press the number  
key beside the desired sub-menu option.  
If the menu that you have selected contains further options,  
repeat this step.  
Menus  
34  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
To  
Press the  
scroll through the menus  
Up or Down key, or the Volume  
key.  
confirm the chosen  
setting  
Select soft key or  
key.  
return to the previous  
menu level  
Back soft key or  
key.  
exit the menu without  
changing the settings  
key.  
List of Menu Functions  
The following list shows the menu structure available and indicates  
the number assigned to each option and the page where you can find  
a description of each feature.  
1. Call History (See page 42)  
1. Missed Calls  
2. Calls Made  
3. Calls Received  
4. Delete All  
• All Calls  
• Missed Calls  
• Calls Made  
• Calls Received  
5. Call Time  
6. Data Volume  
1. Recent Volume  
2. Total Volume  
7. Data Call Time  
Menus  
35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
• 24 Hours  
• 1 Week  
2. Messages (See page 47)  
1. Text Message  
1. Create New Message  
2. Inbox  
• Maximum  
3.Message Type  
• Text  
3. Outbox  
• FAX  
4. Delete All  
• Voice  
• All Messages  
• Inbox (Read)  
• Inbox (Unread)  
• Outbox  
• ERMES  
• X400  
• E-Mail  
4.Reply Path  
• Off  
2. Multimedia Message  
1. Create New Message  
2. Inbox  
• On  
5.Delivery Report  
• Off  
3. Outbox  
4. Drafts  
• On  
5. Delete All  
6.Character Support  
• GSM-alphabet  
• Uni-code  
• Automatic  
2. Multimedia Message  
1.Send Settings  
1.Priority  
• All Messages  
• Inbox (Read)  
• Inbox (Unread)  
• Outbox  
• Draft  
3. Voice Mail  
1. Connect to Voice Mail  
2. Voice Mail Number  
4. Browser Messages  
1. Inbox  
• Low  
• Normal  
• High  
2.Validity Period  
• 1 Hour  
2. Setting  
• Always  
• 6 Hours  
• Never  
• 12 Hours  
• 1 Day  
• Optional  
3. Delete All  
• 1 Week  
5. Text Templates  
6. Settings  
1. Text Message  
1.Service Center  
2.Validity Period  
• 1 Hour  
• Maximum  
3.Delivery After  
• Immediately  
• 1 Hour  
• 6 Hours  
• 12 Hours  
• 1 Day  
• 6 Hours  
Menus  
36  
Download from Www.Somanuals.com. All Manuals Search And Download.  
• 3 Days  
• 1 Week  
• 1 Month  
4.Delivery Report  
• Off  
• All  
4. Language  
• All  
• English  
• Nederlands  
• Português  
• Italiano  
• On  
5.Read Reply  
• Off  
• Français  
• Deutsch  
• Español  
• On  
2.Receive Settings  
1.Msg. Reception  
• Manual  
8. Memory Status  
1. Text Message  
• Automatic  
• Reject  
2. Multimedia Message  
2.Anonymous Reject  
• Off  
3. Games & Apps (See  
• On  
• Download Games  
• (List of Games)  
3.Ads Reject  
• Off  
• (List of Applications)  
• On  
4.Report Allowed  
• Off  
4. Internet (See page 59)  
• On  
1. Home  
3.Multimedia Message Profile  
1.Current Profile  
• RogersMedia  
• Profile 2 - Profile 5  
2.Profile Setting  
1.RogersMedia  
2.Profile 2 -  
Profile 5  
2. Favorites  
3. Go to URL  
4. Browser Profiles  
1. Current Profile  
• GoRogers  
• Profile 2 - Profile 5  
2. Profile Settings  
1.GoRogers  
7. Broadcast Messages  
1. Read  
1.Archive  
2.Temporary  
2. Receive  
1.Profile Name  
2.Home URL  
3.Proxy use  
• Enable  
• Disable  
• Off  
• On  
4.GPRS setting  
1.Proxy Address  
2.Proxy Port  
3. Channel  
Menus  
37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3.APN  
• Auto Power  
2. Calendar  
4.Login ID  
5.Password  
3. Task  
2.Profile 2 - Profile 5  
5. Clear Cache  
4. Notes  
5. Calculator  
6. Converter  
1. Length  
5. Rogers Mall (See page 63)  
2. Weight  
1. Search  
3. Volume  
4. Area  
2. Music & Tones  
3. Games  
5. Temperature  
4. Graphics  
7. Timer  
5. Email/Chat  
6. Celebrity Voicemail  
7. News & Info  
8. Internet  
8. Stopwatch  
9. World Time  
0. SIM-AT  
8. Contacts (See page 76)  
6. Media (See page 65)  
1. Contact List  
2. Add New Contact  
1. Phone  
1. Audio  
1. Download Ring Tunes  
2. Downloaded Ring Tunes  
3. Default Ring Tunes  
4. Record Audio  
5. Voice List  
2. SIM  
3. SIM (FDN)  
3. Speed Dial  
4. Own Number  
1. Empty  
2. Graphics  
1. Download Graphics  
2. Downloaded Graphics  
3. Default Wallpapers  
3. Delete  
2. Empty  
5. FDN List  
6. Group Settings  
1. Family  
1. Audio  
2. Friends  
2. Graphics  
3. Partnership  
4. Office  
4. Memory Status  
5. Other  
7. Management  
1. Copy All to Phone  
2. Delete All  
• All  
7. Tools (See page 68)  
1. Alarm  
• Wake-up Call  
• Alarm1  
• Phone  
• Alarm2  
Menus  
38  
Download from Www.Somanuals.com. All Manuals Search And Download.  
• SIM  
• Connect Tone  
• Alerts on Call  
• Indicative Tones  
• SIM (FDN)  
3. Memory Status  
8. Service Number  
(Only if supported by your SIM card.)  
2. Display Settings  
1. Wallpaper  
1.Main LCD  
1.Download Graphics  
9. Settings (See page 86)  
2.Default Wallpapers  
3.Downloaded Graphics  
4.Text Display  
1. Sound Settings  
1. Incoming Calls  
1.Download Ring Tunes  
2.Default Ring Tunes  
3.Downloaded Ring Tunes  
4.Ring Volume  
5.Alert Type  
5.Text Color  
2.Front LCD  
1.Clock  
2.Cover Title  
3.Wallpaper Images  
• Melody  
2. Skin  
• Vibration  
• Pattern 1  
• Pattern 2  
3. Brightness  
• Vibration Then Melody  
• Vibration And Melody  
2. Keypad Tone  
1.Tone  
4. Front LCD Contrast  
5. Backlight  
1.On  
2.Volume  
3. Message Tone  
1.Text Message  
1.Tone  
• 15 Seconds  
• 30 Seconds  
• 1 Minute  
2.Alert Type  
• 3 Minutes  
• 10 Minutes  
3.Repetition  
• Once  
2.Dim  
• Periodic  
• Off  
2.Multimedia Message (Same  
Options As Text Message)  
4. Power On/Off  
• Off  
• 15 Seconds  
• 30 Seconds  
• 1 Minute  
• 3 Minutes  
• On  
6. Dialing Display  
• Black  
5. Quiet Mode  
• Vibration All  
• Silent All  
• Rainbow  
7. Front LCD  
• Off  
6. Extra Tone  
• Minute Minder  
• On  
Menus  
39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3. Time & Date  
1. Set Time  
2. Call Barring  
1.All Outgoing  
1.Voice Calls  
2.Data Calls  
2.International  
2. Set Date  
3. Time Format  
• 24 Hours  
• 12 Hours  
4. Auto Update  
1.Voice Calls  
2.Data Calls  
• Off  
3.International Except For Home  
1.Voice Calls  
• On  
• Confirm First  
2.Data Calls  
4. Phone Settings  
1. Language  
1.Text Language  
4.All Receiving  
1.Voice Calls  
2.Data Calls  
• Automatic  
• English  
5.Receiving While Abroad  
1.Voice Calls  
• Français  
2.Data Calls  
2.Input Mode  
6.Cancel All  
• English  
• Français  
7.Change Barring Password  
3. Call Waiting  
1.Voice Calls  
2. Greeting Message  
3. Extra Settings  
• Auto Redial  
Activate  
Deactivate  
• Anykey Answer  
• Open to Answer  
2.Data Calls  
Activate  
Deactivate  
5. Network Services  
1. Call Forwarding  
1.Forward Always  
3.Cancel All  
4. Network Selection  
• Automatic  
1.Voice Calls  
2.Data Calls  
• Manual  
2.Busy  
5. Caller ID  
1.Voice Calls  
2.Data Calls  
• Set by Network  
• Hide Number  
• Show Number  
6. Band Selection  
• GSM 850/1900  
• GSM 900/1800  
• Automatic  
3.No Reply  
1.Voice Calls  
2.Data Calls  
4.Unreachable  
1.Voice Calls  
2.Data Calls  
6. Bluetooth  
1. Turn Bluetooth On/Off  
5.Cancel All  
Menus  
40  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2. My Headsets  
• Search New Headset  
3. Bluetooth Services  
1.Headset  
2.Handsfree  
7. Security  
1. PIN Check  
• Disable  
• Enable  
2. Change PIN  
3. Phone Lock  
• Disable  
• Enable  
4. Change Password  
5. Lock Applications  
• Lock All  
• Contacts  
• Call History  
• Text Message  
• Multimedia Message  
• Downloaded Graphics  
• Audio  
6. SIM Lock  
• Disable  
• Enable  
7. FDN Mode  
• Disable  
• Enable  
8. Change PIN2  
8. Reset Settings  
• All  
• Phone Settings  
• Display Settings  
• Sound Settings  
Menus  
41  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Call History  
In this menu, you can:  
view calls you missed, received or dialed  
view the length of calls made and received  
Note: You can access the most recent numbers in the three types of call history records  
by pressing the  
key in Idle mode.  
Missed Calls  
This menu (Menu 1.1)lets you view the last 20 numbers of the calls  
you received, but did not answer. Use the navigation key to scroll  
through the list, and press the  
key to view call details.  
The number is displayed along with the time and date when the call  
was made.  
By pressing the Options soft key, you can:  
view call details.  
call the number back or send a message. You can also dial the  
number by pressing the  
key.  
save the number to your Contact list.  
send a message to the number.  
delete the call from the list.  
delete all calls from the list.  
Calls Made  
This menu (Menu 1.2) lets you view the last 20 numbers you dialed.  
Use the navigation key to scroll through the list, and press the  
to view call details.  
key  
The number is displayed along with the time and date when the call  
was made.  
By pressing the Options soft key, you can:  
Call History  
42  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
view call details.  
call the number back or send a message. You can also dial the  
number by pressing the  
key.  
save the number to your Contacts list.  
send a message to the number.  
delete the call from the list.  
delete all calls from the list.  
Calls Received  
This menu (Menu 1.3) lets you view the last 20 numbers you  
received. Use the navigation key to scroll through the list, and press  
the  
key to view call details.  
The number is displayed along with the time and date when the call  
was made.  
By pressing the Options soft key, you can:  
view call details.  
call the number back or send a message. You can also dial the  
number by pressing the  
key.  
save the number to your Contacts list.  
send a message to the number.  
delete the call from the list.  
delete all calls from the list.  
Delete All  
This menu (Menu 1.4) allows you to delete all of the records in each  
call record type. You can also delete all of your call records at one  
time.  
To  
Press the  
select a call record type  
to delete  
Up or Down key to highlight the desired call  
record type. To delete all of your call  
records, select All calls.  
Call History  
43  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
To  
Press the  
add or remove a check  
mark  
key.  
delete the marked  
records  
Delete soft key.  
When a confirming message displays, press the Yes soft key to  
confirm.  
Call Time  
This menu (Menu 1.5) lets you view the timers for calls you made  
and received.  
Note: The actual time invoiced for calls by your service provider may vary, depending on  
network features, rounding-off for billing purposes and so on.  
The following timers are available:  
Last Call Time: length of the last call.  
Total Sent: total length of all calls you made since the timer was  
last reset.  
Total Received: total length of all calls you received since the timer  
was last reset.  
To reset the timers  
1. Press Menu 1.5 for Call Time.  
2. Press the Reset soft key.  
Call History  
44  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
3. Enter the phone password and then press the OK soft key.  
Note: The password is preset to “00000000” at the factory. To change this password, see  
Data Volume  
This menu (Menu 1.6) lets you view the amount of data transferred  
over your phone in KB.  
Note: The actual amount of data transfer invoiced by your service provider may vary,  
depending on network features, rounding-off for billing purposes and so on.  
The following data trackers are available:  
Recent Volume: shows the Sent, Received, and Total data size  
used.  
Total Volume: shows the total volume of data sent and received  
from the phone.  
To reset the Data Volume tracker  
1. Press Menu 1.6 for Data Volume.  
2. Highlight either Recent Volume or Total Volume and press the  
Select soft key or the  
key.  
3. Press the Reset soft key.  
4. Enter the phone password and then press the OK soft key.  
Note: The password is preset to “00000000” at the factory. To change this password, see  
Data Call Time  
This menu (Menu 1.7) lets you view the amount of time used for data  
transfer.  
Call History  
45  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Note: The actual time invoiced for calls by your service provider may vary, depending on  
network features, rounding-off for billing purposes and so on.  
The following timers are available:  
Recent Time: shows the time used for the last data call sent or  
received.  
Total Time: shows the total time used to send or receive data.  
To reset the timers  
1. Press Menu 1.7 for Data Call Time.  
2. Press the Reset soft key.  
3. Enter the phone password and then press the OK soft key.  
Note: The password is preset to “00000000” at the factory. To change this password, see  
Call History  
46  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Messages  
You can send and receive a range of different message types from  
your mobile phone, including:  
Text Message allows you to send text messages (SMS) to another  
text messaging-capable phone. In addition, your phone supports  
the Enhanced Messaging Service (EMS), which enables you to  
include simple pictures, melodies, and animated images in your  
messages. To use this feature, you must subscribe to your service  
provider’s message service.  
Multimedia Message can be sent to another multimedia message  
(MMS) capable phone or an email address. Multimedia messages  
can contain text,graphics and audio attachments.  
Broadcast Messages allow you to receive specific information  
related to a specific area (cell) from your service provider.  
Text Message  
Use the Text Message option (Menu 2.1) to compose new text  
messages and to read text messages in your Inbox.  
Create New Message  
1. Press Menu 2.1.1 for Create New Message.  
2. Create your message.  
For further details about entering characters, see “Entering Text”  
on page 29.  
3. When you finish entering your message, press the Options soft  
key and select Send, or press the  
key.  
4. Enter the destination number in an empty slot.  
Note: Press Names to add destinations from your Contact List.  
Messages  
47  
Download from Www.Somanuals.com. All Manuals Search And Download.  
             
To add another destination, select another empty slot and add the  
additional destination  
5. When you have finished entering the destinations, press the Send  
soft key.  
Your phone sends the text message.  
Text Message Options  
While you are composing your text message, press the Options soft  
key to select from the following:  
Send: allows you to send the message.  
Text Formatting: allows you to set the text size, text mode, bold,  
italic, and alignment for the text entered.  
Add Media: allows you to add pictures, animation, or melody to  
your message.  
Add Picture: allows you to add a picture to your message.  
Add Animation: allows you to add an animation to your  
message. Select between Preset Animation or My Animation.  
Add Melody: allows you to add a melody to your message.  
Select between Preset Melody and My Melody.  
Text Templates: allows you to insert one of the preset message  
templates to the text.  
Add from Favorites: allows you to add a website address from  
your favorite internet addresses.  
Save Message: save the message in the Phone or SIM.  
Select Language: allows you to set the language used for the text  
message.  
Press the Back soft key to exit the Options screen.  
Creating a Long Text Message  
When you write a text message, the phone automatically splits it into  
several messages if the message exceeds the maximum number of  
characters allowed in a single message. The number of split  
messages to be sent is shown each time your message is split.  
Messages  
48  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Depending on your service provider, the maximum number of  
characters may vary.  
Inbox and Outbox  
Your Inbox stores all your received text messages, while your Outbox  
stores messages waiting to be sent. To view a message stored in  
your Inbox or Outbox:  
1. In Idle mode, press Menu 2.1 for Text Message.  
2. Highlight either Inbox or Outbox and press the Select soft key.  
The message list opens.  
3. To view a message in the list, highlight it and press the  
key.  
4. Press the Up or Down key to scroll through the message screen.  
You can access the message options by pressing the Options soft  
key. For more information, see below.  
5. Press the Left or Right navigation keys to scroll to the previous or  
next message.  
6. When you have finished, press the  
key.  
Text Message Options  
While viewing the content of a message, press the Options soft key  
to access the following options:  
Note: Reply, Forward and Call Back are not available from the Outbox. Edit is not available  
from the Inbox.  
Edit: allows you to modify the message.  
Reply: allows you to reply to the message via Text message.  
Forward: allows you to forward the message.  
Delete: deletes the message.  
Call Back: allows you to dial the originating message number.  
Messages  
49  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Move to Phone/Move to SIM: If a message is stored in the SIM  
card, it is transferred to the phone’s memory. If a message is  
stored in the phone’s memory it is transferred to the SIM card.  
Extract Address: allows you to save the recipient or sender’s  
number and URL, Email addresses or phone numbers from the  
message text.  
Delete All  
Use this menu to delete groups of text messages:  
1. From the Idle menu, select Menu 2.1.4 for Delete All.  
2. Press the  
messages.  
key to check/uncheck different categories of text  
3. When you are finished, press the Delete soft key.  
4. Press the Yes soft key to confirm deletion.  
Multimedia Message  
Create new message  
1. Press Menu 2.2.1 for Create New Message. The media types  
screen is displayed.  
2. Add the message content by selecting the following media types  
and pressing the  
key:  
Subject: allows you to enter text for the subject. When  
finished, press the Save soft key to return to the media type  
screen.  
Graphics: add an existing picture from your Downloaded  
Graphics folder.  
Audio: allows you to add an audio file. You can record a new  
audio clip, or select an audio file stored in the Voice List or  
Downloaded Ring Tunes folders.  
Messages  
50  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Message: enter the message text. When finished, press the  
Opt. or the  
key:  
•Select Done to complete the text entry and return to the media  
type screen.  
•Select Text Templates to add text from the default templates.  
3. After you have created the message, press the Opt. soft key and  
select Send.  
Multimedia Message Options  
While you are composing your multimedia message, press the Opt.  
soft key to select from the following:  
Preview: allows you to preview the message before sending.  
Send: allows you to send the message  
Add Page: allows you to additional pages to your multimedia  
message.  
Page Timing: allows you to set the time (in seconds) a page is  
displayed before displaying the next page.  
Text Effect: allows you to set the color, size and style for the text.  
Clear Subject/Picture/Sound/Message: clears the highlighted  
object from the multimedia message.  
Delete Page: deletes a page from your message.  
Save Message: saves the message to Drafts folder.  
Settings: allows you to select a Priority, Validity Period, Delivery  
After, Delivery Report, Read Reply.  
Inbox, Outbox and Drafts  
Your Inbox stores all your received multimedia messages, while your  
Outbox stores messages waiting to be sent. Drafts stores messages  
that you have saved to be completed later.  
To view a message stored in your Inbox, Outbox or Drafts folder:  
1. In Idle mode, press Menu 2.2 for Multimedia Message.  
Messages  
51  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2. Highlight either Inbox, Outbox or Drafts and press the Select soft  
key. The message list opens.  
3. To view a message in the list, highlight it and press the  
key.  
4. Press the Up or Down key to scroll through the message screen.  
You can access the message options by pressing the Opt. soft  
key. For more information, see below.  
5. Press the Left or Right navigation keys to scroll to the previous or  
next page.  
6. When you have finished, press the  
key.  
Multimedia Message Options  
While viewing the content of a message, press the Options soft key  
to access the following options:  
Note: Not all options are available for each of the Inbox, Outbox and Drafts.  
Edit: allows you to modify the message.  
Reply: allows you to reply to the message.  
Send: allows you to send the message.  
Reply All: allows you to reply to all the recipients of the message.  
Call Back: allows you to call the sender of the message.  
Forward: allows you to forward the message to another person.  
Replay: allows you to replay the message if it has an attached file.  
Delete: allows you to delete the message.  
Extract Address: allows you to move the address to the contacts  
list.  
Save Media: saves the attached media to the to the Media folder.  
Properties: shows you detailed information about the message.  
Delete All  
Use this menu to delete groups of multimedia messages:  
Messages  
52  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1. From the Idle menu, select Menu 2.2.5 for Delete All.  
2. Press the key to check/uncheck different categories of  
multimedia messages.  
3. When you are finished, press the Delete soft key.  
4. Press the Yes soft key to confirm deletion.  
Voice Mail  
This menu (Menu 2.3) allows you to access your voice mailbox, if  
your network supports this service.  
The following options are available:  
Connect to Voice Mail: before using the Voice Mail feature, you  
must have a valid voice server number configured in your phone.  
Your service provider may have configured the number for you  
already or you have to enter the voice server number obtained from  
your service provider. You can then select this option and press the  
OK soft key to listen to your messages. You can quickly connect to  
the voice server by pressing and holding the  
key in Idle mode.  
Voice Mail Number: allows you to change the voice mail server  
number, or name, if necessary.  
1. Select the voice server that you wish to change and press the  
Select soft key.  
2. Press the Save soft key.  
3. To change the voice server number:  
To  
Press the  
enter the server number  
correct a digit  
corresponding numeric keys.  
.
move the cursor to the left or Left or Right key.  
right without clearing a digit  
Messages  
53  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Note: Voice mail is a network feature. Please contact your service provider for further  
details.  
Browser Messages  
Using this menu (Menu 2.4), you can read messages received using  
your Internet browser.  
Inbox: Highlight the message you want to read and press the  
Select soft key.  
Setting: Select whether you receive browser messages. Highlight  
Always, Never or Optional and press the Select soft key.  
Delete All: Press the Yes soft key to delete all your browser  
messages.  
Text Templates  
Using this menu (Menu 2.5), you can preset the messages that you  
use most frequently.  
Select the text template you want and press the Select soft key.  
The following options are available:  
Edit: allows you to edit the currently-highlighted message. For  
further details about entering characters, see “Entering Text” on  
page 29.  
Send Message: allows you to compose a message with the  
template already inserted into the body of the message. Once you  
have completed your message, you can send or simply save it. For  
further details about how to send a message, see page 47.  
Delete: allows you to delete the message. You are asked to  
confirm the deletion by pressing the Yes soft key.  
Settings  
You can set up various options for using text and multimedia  
messaging services (Menu 2.6).  
Messages  
54  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
Text Message  
The following Text Message (SMS) settings options are available:  
Service Center: allows the recipient of your message to send you  
a reply through your message center, if your network supports this  
service.  
Validity Period: you can select the length of time your messages  
are stored in the message center after they are sent. The actual  
expiry date is determined by your service provider's configuration.  
Message Type: set the default type to one of Text, FAX, Voice,  
ERMES, X400 or E-Mail.  
Reply Path: allows the recipient of your message to send you a  
reply message using your message center, if your network  
supports this service.  
Delivery Report: when this option is enabled, the network informs  
you whether or not your message has been delivered.  
Character Support: choose between GSM-alphabet, Uni-code, or  
Automatic.  
Multimedia Message  
The following options are available:  
Send Settings  
Priority: you can select the priority level of your messages.  
Validity Period: you can select the length of time your messages  
are stored in the message center after they are sent. The actual  
expiry date is determined by your service provider's configuration.  
Delivery After: you can set a time delay before the phone sends  
your messages.  
Delivery Report: when this option is enabled, the network informs  
you whether or not your message has been delivered.  
Read Reply: when this option is enabled, your phone sends a  
request for a reply along with your message to the recipient.  
Messages  
55  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Receive Settings  
Msg. Reception: allows you to set the message receipt options.  
Choose from Manual, Automatic, or Reject.  
Anonymous Reject: allows you to automatically reject messages  
with a category of anonymous.  
Ads Reject: allows you to automatically reject messages with a  
category of advertisement.  
Report Allowed: allows messages with a report.  
Multimedia Message Profile  
This setting sets the default profile used for MMS access. Your  
default choice is RogersMedia. For more information, see “Profile  
Broadcast Messages  
Broadcast messages are transmitted to all handsets within the area.  
The following options are available:  
Read: allows you to view broadcast messages stored in the  
Archive or Temporary folder.  
Receive: allows you to enable or disable the reception of  
broadcast messages.  
Channel: allows you to indicate the channels from which you wish  
to receive broadcast messages. Press the  
a channel.  
key to check/uncheck  
Language: allows you to select your preferred language in which  
to display cell broadcast messages. Please contact your service  
provider for further details.  
Memory Status  
You can check the memory amount available and remaining for  
storing the messages.  
The display shows the total space including the used and free space.  
You can also view how much space is currently occupied by each  
message box.  
Messages  
56  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Games & Apps  
You can play games already stored on your phone, as well as  
download new games from your service provider.  
Download Games  
This option allows you to download games from your service  
provider. Follow the online instructions shown on your display  
screen. Once you have downloaded games, they are added to your  
phone’s list of games.  
To start a game  
1. In Idle mode, press the Menu soft key to access the menu.  
2. Highlight Games & Apps and press the Select soft key or the  
key.  
3. Scroll to the game you want and press the  
key.  
4. The game’s welcome screen displays information about the  
game.  
While you are playing a  
Press the  
game, to  
adjust the sound volume  
Volume key  
key.  
.
exit the game  
highlight an option in a list  
select an option  
Navigation keys.  
key.  
Games & Apps  
57  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Deleting Games  
1. From your list of games, scroll to the game you want to delete  
and press the Options soft key.  
2. Scroll to Delete and press the  
key.  
3. Confirm that you want to delete the game by pressing the Delete  
soft key.  
Games & Apps  
58  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Internet  
This menu (Menu 4) allows you to surf the Internet, create  
bookmarks, configure your Internet browser or clear your cache.  
Home  
This menu (Menu 4.1) takes you to an online homepage provided by  
your service provider. Selecting this menu connects the phone to the  
network and loads the homepage of the Wireless Web service  
provider.  
To scroll through the screen, use the Up and Down navigation  
keys.  
To select a browser item, press the  
key.  
To exit the browser at any time, press the  
key.  
Exiting the Internet Browser  
To exit the browser at any time, simply press the  
Navigating the Internet Browser  
key.  
To  
Press the  
scroll through and select  
browser items  
Up or Down navigation key until the  
item is highlighted, and then press the  
key to confirm the selection.  
corresponding numeric key.  
select a numbered item  
return to the previous  
page  
Back soft key or the  
key.  
return to the startup  
homepage  
press the key and select Home.  
Internet  
59  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Entering Text in the Internet Browser  
When you are prompted to enter text, the current text input mode is  
indicated on the screen. See “Entering Text” on page 29 for  
information.  
Favorites  
You can create bookmarks for your favorite Internet sites to quickly  
and easily access it in the future. Favorites store your favorite URL  
addresses.  
1. In Idle mode, press the Menu soft key to access the menu.  
2. Highlight Internet and press the Select soft key or the  
key.  
key.  
3. Select Favorites and press the Select soft key or the  
4. Scroll to the desired Favorite or empty row and press the Select  
soft key or the key.  
5. If the item is Empty, you will be taken to the Enter URL screen.  
Otherwise, choose from the following:  
Go: to access the bookmarked webbed.  
Edit: to modify the bookmark.  
Delete: to remove the bookmark. Press Yes to confirm.  
6. If you are creating a new bookmark, or editing an existing  
bookmark, enter the URL of the bookmark and press the Save  
soft key.  
Tip: Use the Symbol text entry mode (by pressing the right soft key or * key) to  
conveniently enter periods and characters such as “/”, “~” or”@”.  
Internet  
60  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
7. Enter a name for this bookmark and press the OK soft key. If you  
leave the name blank, the URL will be displayed in the Bookmark  
list.  
Go to URL  
The Go to URL screen allows you to directly type in a web address  
and load that page without clicking on a link. To visit a web address  
directly, enter the URL and press the Go soft key.  
Tip: Use the Symbol text entry mode (by pressing the right soft key or * key) to  
conveniently enter periods and characters such as “/”, “~” or”@”.  
Browser Profiles  
You can set up and choose different profiles for the Internet browser.  
Current Profile  
To change your browser profile:  
1. In Idle mode, press the Menu soft key to access Menu mode.  
2. Highlight Internet and press the Select soft key or the  
key.  
3. Highlight Browser Profiles and press the Select soft key or the  
key.  
4. Select Current Profile and press the Select soft key or the  
key.  
5. Select the profile you want to use and press the Select soft key or  
the  
key.  
Profile Setting  
For each profile, the following options are available:  
Internet  
61  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Profile Name: enter a name that you wish to assign to the Browser  
profile.  
Home URL: set the address of your startup homepage. When the  
default homepage displays, you can delete it using the key and  
enter your own choice.  
Proxy use: select either Enable or Disable  
GPRS setting: The following sub options are available:  
Proxy Address: enter the IP address of the proxy server.  
Proxy Port: enter the port number of the proxy server.  
APN: enter the access point name used for the address of the  
GPRS network gateway.  
Login ID: enter the User ID required to connect to the GPRS  
network.  
Password: enter the password required to connect to the GPRS  
network.  
Clear Cache  
You can clear the information stored in the cache, the phone’s  
temporary memory which stores the most recently accessed Web  
pages.  
To clear, press the Yes soft key to confirm the deletion. Otherwise,  
press the No soft key.  
Internet  
62  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Rogers Mall  
The Rogers Mall menu (Menu 5) provides a convenient place to  
download all your ringtunes, games and graphics. In addition, you  
can surf the Internet.  
Search  
This menu (Menu 5.1) takes you to an online search engine provided  
by your service provider. arch page of your service provider.  
Music & Tones  
This menu (Menu 5.2) allows you to download music and ring tunes  
from your service provider. Follow the online instructions shown on  
your display screen.  
Once you have downloaded ring tunes, they are added to your  
phone’s list of ring tunes.  
Games  
This menu (Menu 5.3) allows you to download games from your  
service provider. Follow the online instructions shown on your  
display screen. Once you have downloaded games, they are added to  
your phone’s list of games.  
Note: Game services may not be available depending upon your service provider.  
Graphics  
This menu (Menu 5.4) allows you to download new wallpapers from  
your service provider. Follow the online instructions shown on your  
display screen. Once you have downloaded graphics, they are added  
to your phone’s list of wallpapers.  
Rogers Mall  
63  
Download from Www.Somanuals.com. All Manuals Search And Download.  
           
Email/Chat  
This menu (Menu 5.5) allows you to view email and instant  
messages using a web-based client. Follow the online instructions  
shown on your display screen.  
Celebrity Voicemail  
This menu (Menu 5.6) allows you to download new audio clips from  
your service provider that feature celebrity voices. Follow the online  
instructions shown on your display screen. Once you have  
downloaded the audio clips, they are added to your phone’s list of  
audio clips.  
News & Info  
This menu (Menu 5.7) takes you to an online homepage provided by  
your service provider providing news and information links. Selecting  
this menu connects the phone to the network and loads the search  
page of your service provider.  
Internet  
This menu (Menu 5.8) takes you to an online homepage provided by  
your service provider. Selecting this menu connects the phone to the  
network and loads the homepage of the Wireless Web service  
provider. For more information, see “Home” on page 59.  
Rogers Mall  
64  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Media  
The Media menu (Menu 6) is used to manage your collection of ring  
tunes and graphics.  
Audio  
The Audio menu (Menu 6.1) allows you to get new tunes using the  
Internet browser. You can download, record new, and save to your  
Downloaded Ring Tunes folder.  
Download Ring Tunes  
This menu allows you to download ring tunes from your service  
provider. Follow the online instructions shown on your display  
screen. Once you have downloaded ring tunes, they are added to  
your phone’s list of ring tunes.  
Downloaded Ring Tunes  
This menu allows you to select audio clips that you have downloaded  
from your service provider and play them, and assign them as your  
ringer.  
Default Ring Tunes  
The Default Ring Tunes menu contains all the standard ring tunes  
that come with your phone. Scroll to a desired ring tune and press  
the Select softkey. Press Yes to confirm.  
Record Audio  
You can record audio clips (Menu 6.1.4). After recording, you can  
send the audio clip to other people using Multimedia Messaging.  
Media  
65  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
1. Press Menu 6.1.4.  
2. To start recording, press the Select soft key or press the  
3. Record a memo by speaking into the microphone.  
key.  
4. When you are finished, press the Select soft key. By default, the  
audio clip is stored in your Voice List folder.  
5. Press the Options soft key, and select one of the following  
display:  
Send: allows you to send the audio clip using a multimedia  
message.  
Rename: allows you to change the name of the audio clip.  
Delete: allows you to delete the audio clip.  
Properties: shows the properties of the audio clip, such as the  
name, size and audio format.  
Voice List  
This menu shows all your recorded audio clips. Scroll to an audio clip  
and press the Select soft key. Press the Select soft key to listen to  
your audio clip.  
Graphics  
In this menu (Menu 6.2), you can download new wallpaper images  
or select a new wallpaper image from your collection of pre-provided  
and downloaded graphics.  
Download Graphics  
Using the Download Graphics option, you can access your Service  
Provider’s site where you can download new graphics.  
Media  
66  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Downloaded Graphics  
This menu allows you to access your downloaded graphics.  
Scroll to the image you want to view.  
Default Wallpapers  
The Default Wallpapers menu contains all the standard wallpapers  
that come with your phone. Scroll to a desired wallpaper and press  
the Select soft key. Press Yes to confirm.  
Delete  
The Delete menu (Menu 6.3) allows you to delete audio and graphics  
files that you have recorded or taken, or audio or graphic files that  
you have downloaded. To access the Delete option, use the following  
steps:  
1. In Idle mode, press the Menu soft key to access Menu mode.  
2. Use the navigation keys to highlight Media and press the Select  
soft key or the  
key.  
3. Highlight the Delete menu option and press the Select soft key.  
4. Use the Up or Down navigation keys to select Audio or Graphics.  
5. Use the  
key to check/uncheck the folder(s) you wish to delete.  
6. When you are finished, press the Delete soft key. Press the Yes  
soft key to delete your files.  
Memory Status  
The Memory Status menu (Menu 6.4) allows you to view the usage  
and available memory for different kinds of data (graphics, audio,  
games, etc.). Press the navigation key left or right to scroll through  
the different types of data.  
Media  
67  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Tools  
Tools enable you to:  
set an alarm so that the phone rings at a specific time, such as to  
remind you of an appointment.  
view the calendar and organize your schedule.  
use the phone as a calculator for basic mathematical equations or  
currency exchange operations.  
use a timer or stopwatch.  
view times in different parts of the world.  
Alarm  
In Idle mode, press Menu 7.1 to start the Alarm feature. This feature  
allows you to:  
set the alarm to ring at a specific time.  
set the phone to switch on automatically and ring the alarm even if  
the phone is switched off.  
The following options are available:  
Wake-up Call: this alarm type repeats daily on a specified range of  
days in the week.  
Alarm1/2: this alarm type occurs only once or repeats daily.  
Auto Power: when this option is set to On, the alarm rings at the  
specified time, even if the phone is switched off. If the menu option  
is set to Off and the phone is switched off at the specified time, the  
alarm does not ring.  
To set the alarm  
1. In Idle mode, press the Menu soft key to access the menu mode.  
2. Select Tools and press the Select soft key or the  
key.  
key. The  
3. Highlight Alarm and press the Select soft key or the  
following options display:  
Tools  
68  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Wake-up Call: the alarm rings to wake you up at the specified  
time.  
Alarm1: primary alarm setting.  
Alarm2: secondary alarm setting.  
Auto Power: the alarm rings even when the phone is turned off.  
4. Select an alarm type and press the Select soft key or the  
key.  
5. Press the Options soft key, and select from the following options:  
Alarm Day: use the Up or Down navigation key to scroll  
through the day(s), and press the  
key to check/uncheck the  
days you wish the alarm to sound. Press the Save soft key to  
save your settings.  
Note: Your phone is preset to a 12-hour format. To change the time format, see “Time &  
Alarm Time: use the alphanumeric keypad enter a time for the  
alarm to sound and press the Set soft key. Select AM or PM  
and press the  
Alarm Tone: press the  
Press the Select soft key or the  
key.  
key, and highlight an alarm tone.  
key to select a tone.  
Remove Alarm: use this option to remove any alarm settings  
you have made.  
6. Press the Save soft key to save changes.  
Note: To stop the alarm when it rings, open the phone and press any key.  
Note: Press the Confirm soft key to turn off the alarm.  
Calendar  
With the Calendar feature (Menu 7.2), you can view the current  
month as well as previous and upcoming months. You can also  
Tools  
69  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
create Scheduler, To Do List, Call, and Anniversary entries. It also  
shows any Missed Alarm Events that have occurred.  
Creating an Event  
1. In Idle mode, press the Menu soft key to access the menu mode.  
2. Select Tools and press the Select soft key or the  
3. Highlight Calendar and press the Select soft key or the  
4. Use the navigation keys to select a date and press the Select soft  
key.  
key.  
key or the key.  
5. Enter text in the Memo screen press the Save soft key.  
6. Choose one of the following categories for your event and press  
the Select soft key or the  
key:  
Scheduler  
To Do List  
Call  
Anniversary  
7. If you selected Call, enter the number of the person you wish to  
call and press the key. Press the Names soft key to select a  
person in your Contacts List.  
8. Fill in the following event details:  
Memo Time: enter the Memo Time using the keypad and press  
the Set soft key.  
AM/PM: use the Up or Down navigation key to select AM or PM  
for the start time of the scheduled event and press the Select  
soft key.  
Set Alarm?: allows you to set an alarm for this event. Press  
Yes to set or No to skip.  
Alarm Time: allows you to enter the time you wish the alarm to  
sound. Press the Set soft key.  
Tools  
70  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
AM/PM: use the Up or Down navigation key to select AM or PM  
for the alarm time and press the Select soft key.  
Alarm Tone: allows you to choose from 3 pre-loaded alarm  
tones. Press the Select soft key.  
9. When you have finished, press the Save soft key.  
Event Options  
The following options display when pressing the Options soft key  
after setting an event.  
Add: this option allows you to add additional text to the event.  
Delete: this option allows you to delete the event from the  
calendar.  
Edit: this option allows you to edit the event for the selected day.  
Move: this option allows you to move the event to another day.  
Copy: this option allows you to copy this event to another day.  
Viewing an Event  
1. In Idle mode, press the Menu soft key to access the menu mode.  
2. Select Tools and press the Select soft key or the  
3. Highlight Calendar and press the Select soft key or the  
4. Use the navigation keys to select a date and press the Select soft  
key.  
key.  
key or the key.  
Task  
You can use the Task function to in the same way you would use a to-  
do list. When the task has been completed, you can check it off as  
done.  
Tools  
71  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
To create a task  
1. In Idle mode, press Menu 7.3 to start the Task feature  
2. The first time you enter the task menu, it will be empty. Press the  
Add soft key.  
Otherwise, the list of tasks is displayed. Press the Select soft key  
or the  
key. Press the Options soft key and select Add.  
3. A blank memo screen is displayed. Enter your text and press the  
Save soft key.  
4. Use the navigation keys to select a date and press the Select soft  
key or the  
key.  
5. Follow the steps for creating a new event, as described in steps 8  
To see your Task list, you can go to the Task menu or you can see  
each task under Day view of the calendar for the day it was started.  
To mark a task as Done:  
1. Select the task in the task list.  
2. Press the Options soft key and highlight Mark. Press the Select  
soft key or the  
key.  
3. Highlight Done and press the Select soft key or the  
key.  
The task will have a check mark after it in the Task list.  
Notes  
You can use the Note function to in the same way you would use a  
calendar event.  
To enter notes, follow these steps:  
Tools  
72  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
1. In Idle mode, press Menu 7.4 to start the Notes feature  
2. The first time you enter the Note menu, it will be empty.  
3. A blank memo screen displays. Enter your text and press the  
Save soft key.  
4. Select a Save to category and press either the Select soft key or  
the  
key.  
5. Follow the steps for creating a new event, as described in steps 6  
Calculator  
With this feature (Menu 7.5), you can use the phone as a calculator.  
The calculator provides basic arithmetic functions: addition,  
subtraction, multiplication and division.  
1. Enter the first number using the numeric keys.  
To delete mistakes or clear the display, press the  
To include a decimal point, press * key.  
key.  
To select brackets or an operator, press the # key.  
2. Enter the second number.  
3. To view the result, press the Equal soft key.  
4. Repeat steps 1 to 3 as many times as required.  
Converter  
Using the Converter (Menu 7.6), you can easily determine many unit  
conversions (length, weight, volume, area, temperature) as well as  
currency conversions.  
1. Select the conversion type and press the Select soft key:  
Length  
Tools  
73  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Weight  
Volume  
Area  
Temperature  
2. Press the Left or Right navigation key to select the original unit  
type (From) and press the Down navigation key to select the next  
field.  
3. Enter the amount to convert. Use the  
key to insert a decimal.  
Press the Down navigation key to select the next field.  
4. Press the Left or Right navigation key to select the starting unit  
type (From) and press the Down navigation key to select the next  
field (To).  
5. To view the result, press the Equal soft key. The converted value  
is displayed.  
6. Press the Back soft key to calculate a new value.  
Timer  
The Timer (Menu 7.7) allows you to create a digital countdown.  
To start the timer:  
1. Press the Set soft key.  
2. Using the numeric keys, enter the amount of time that you wish  
to countdown from and press the Set soft key.  
3. Press the Start soft key or the  
key to start the timer.  
key to stop the timer.  
4. Press the Stop soft key or the  
Stopwatch  
The Stopwatch (Menu 7.8) allows you to use your phone as a stop  
watch.  
Tools  
74  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
1. Press the  
key to start the stopwatch. You can take up to four  
key.  
laptimes by pressing the  
2. Press the Reset soft key to erase all stop watch times recorded.  
World Time  
The World Time (Menu 7.9) allows you to view the time of day or  
night in any part of the world.  
1. Use the navigation keys to scroll through different time zones. For  
each time zone, a major city is displayed.  
2. Press the Set soft key or the  
key to display the following  
options:  
Set Local: Change the home time zone in the display.  
Set DST: Select daylight savings time for the displayed time  
zone.  
SIM-AT  
SIM-AT is a SIM-specific feature that allows you to set up a  
commonly-used dialling prefix. When dialling a number that includes  
the prefix, simply dial the remaining digits and press the  
more information, consult your service provider.  
key. For  
Tools  
75  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
Contacts  
You can store phone numbers and their corresponding names in  
both your SIM card and phone’s memory. They are physically  
separate but are used as a single entity, called your Contact List  
(Menu 8).  
Contact List  
The Contact List (Menu 8.1) displays all your stored phone numbers  
located in both your phone’s memory and your SIM card. While  
accessing any Contact List entry, press the Options soft key to  
access the options for the entry.  
To  
Press the  
key or View soft key.  
view the highlighted  
Contact  
scroll up or down the  
Contact List  
Up or Down key until the option you want  
highlights.  
call the highlighted  
Contact  
key.  
When viewing a contact, the following Options are available:  
Edit Number: allows you to edit the number.  
Edit Name: allows you to edit the name of the contact.  
Send Message: allows you to send a text message or a multimedia  
message to this contact.  
Assign Speed Dial: allows you to set the speed dial key for this  
entry.  
Copy to Phone: allows you to copy the contact information from  
the SIM to the phone.  
Contacts  
76  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Copy to SIM (FDN): allows you to copy the contact information  
from the Phone to the SIM (FDN).  
Delete Entry: allows you to delete the selected Contacts list entry.  
Searching for and Dialing a Number in the Contact  
List  
After storing numbers in the Contact List, you can search for them by  
name.  
Searching for a Number by Name  
1. In Idle mode, press the Menu soft key to access the menu.  
2. Select Contacts and press the Select soft key or the  
key.  
key.  
3. Select Contact List and press the Select soft key or  
4. Enter the first few letters of the name that you want to find. The  
Phone Book entries are listed, starting with the first entry  
matching your input.  
To  
Press the  
view the highlighted entry  
select a different entry  
key or View soft key.  
Up or Down navigation key until the  
entry you want highlights.  
5. Once you have found the entry, press the  
key to dial the  
number, or press the Options soft key to access the Phone Book  
entry options.  
Contacts  
77  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Add New Contact  
There are two ways to store a number:  
From Idle mode, entering a number and using the Save soft key.  
From the Contacts menu, using the Add New Contact option  
(Menu 8.2).  
Storing a Number in Idle Mode  
As soon as you start to enter a number, Save appears above the left  
soft key to allow you to store the number in the Contact List.  
1. Enter the number you want to store.  
Note: If you make a mistake while entering a number, correct it using  
details, see page 18.  
. For further  
2. When you are sure that it is correct, press the Save soft key.  
3. Select the memory location to store the new contact, Phone, SIM  
or SIM (FDN).  
Note: When you change phones, any numbers stored in your SIM card memory are  
automatically available with the new phone, whereas any numbers stored in the phone’s  
memory must be reentered or transferred using the optional data kit accessory. However,  
contacts stored on the phone may include additional details not available on the SIM  
card.  
4. If you selected Phone above, select the Type of phone number  
(Mobile, Home, etc.). Otherwise, skip this step.  
5. Enter a name and press the Save soft key. For further details  
about entering characters, see “Entering Text” on page 29.  
Your Contact is now displayed on screen.  
Contacts  
78  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Storing a Number Using the Contacts Menu  
1. In Idle mode, press the Menu soft key to access the menu.  
2. Select Contacts and press the Select soft key or the  
key.  
3. Scroll to Add New Contact by pressing the Up or Down key and  
press the Select soft key.  
4. Select the memory location to store the new contact, Phone, SIM  
or SIM (FDN).  
Note: When you change phones, any numbers stored in your SIM card memory are  
automatically available with the new phone, whereas any numbers stored in the phone’s  
memory must be reentered or transferred using the optional data kit accessory. However,  
contacts stored on the phone may include additional details not available on the SIM  
card.  
5. If you selected Phone above, select the Type of phone number  
(Mobile, Home, etc.). Otherwise, skip this step.  
6. Enter a name and press the Save soft key. For further details  
about entering characters, see “Entering Text” on page 29.  
Your Contact is now displayed on screen.  
Speed Dial  
You can assign up to eight phone numbers from Contact List that you  
use most frequently to the number keys (2 to 9), and then dial them  
easily whenever you want, simply by pressing and holding the  
associated number key.  
Setting up Speed-dial Entries  
1. In Idle mode, press the Menu soft key to access the menu.  
2. Select Contacts and press the Select soft key or the  
key.  
Contacts  
79  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
3. Scroll to Speed Dial by pressing the Up or Down navigation key  
and press the Select soft key or the key.  
4. Select the key in which you wish to assign the speed-dialing  
number (from the 2 to 9 keys), and press the key.  
Note: Memory location 1 is reserved for your Voice Mail server number.  
5. Choose from the following options:  
Edit Number: allows you to enter the phone number assigned  
to this speed dial key. Press the Names soft key to choose from  
the Contact List or the FDN List.  
Edit Name: allows you to enter a name assigned to this speed  
dial key.  
Delete: allows you to delete a speed dial entry.  
Select the entry you would like to add and press the Select soft  
key or the  
key to save the entry.  
Using Speed dial  
In Idle mode, to speed-dial the numbers assigned to the 2 to 9  
keys, press and hold the appropriate key.  
Own Number  
This function is a memory aid, which you can use to check your own  
phone number(s) if you need to do so.  
1. In Idle mode, press the Menu soft key to access the menu.  
2. Select Contacts and press the Select soft key or the  
key.  
3. Scroll to Own Number by pressing the Up or Down navigation key  
and press the Select soft key or key.  
Contacts  
80  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
4. Highlight the number you want to view by pressing the Up or  
Down navigation key. The number type is displayed.  
FDN List  
FDN (Fixed Dial Number) mode, if supported by your SIM card,  
allows you to restrict your outgoing calls to a limited set of phone  
numbers.  
Group Settings  
You can organize your contacts into groups such as Family, Friends,  
Partnership, Office and Other. Additionally, you can assign a unique  
Caller ID or ring tune to the group.  
From the Group Settings menu, press the Select soft key to access  
the following options:  
Ring Tune: allows you to set the ring tune associated with this  
group. Choose from the Default Ring Tunes or from the  
Downloaded Ring Tunes.  
Edit Name: allows you to change the name of the group.  
View Image: allows you to view the assigned group image.  
Adding a contact to the Group  
1. In Idle mode, press the Menu soft key to access the menu.  
2. Select Contacts and press the Select soft key or the  
key.  
key.  
3. Select Contact List and press the Select soft key or  
4. Highlight the contact that you wish to assign to a group and press  
the key. The Contact is displayed on-screen  
5. Highlight the desired group that you wish to add the contact to  
and press the key.  
6. Press the left or right navigation key until Group is displayed and  
press the key.  
Contacts  
81  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
7. Press the up or down navigation key until the desired group is  
displayed on screen and press the key.  
8. When you are finished, press the Back soft key or  
key to exit  
to the Idle screen.  
Management  
The Management menu allows you to select where your contacts will  
be saved, copy your SIM contacts to your phone, delete your  
contacts, or check your memory status.  
Copy All to Phone  
This option allows you to copy all contacts from your SIM card to  
your phone. When you copy entries to the phone, duplicate entries  
are created in your Phonebook.  
1. In Idle mode, press the Menu soft key to access the menu.  
2. Select Contacts and press the Select soft key or the  
key.  
3. Highlight Management and press the Select soft key or the  
key.  
4. Highlight Copy All to Phone and press the Select soft key or the  
key.  
5. After receiving the “Sure to Copy All?” confirmation message,  
press the Yes soft key.  
Note: Options are available for entries stored to your phone that are not available when  
stored to the SIM card. For details, see the note on page 78.  
Contacts  
82  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Delete All  
This option allows you to delete your contacts. You may delete from  
All, Phone, or SIM card. To delete entries:  
1. In Idle mode, press the Menu soft key to access the menu.  
2. Select Contacts and press the Select soft key or the  
key.  
3. Scroll to Management by pressing the Up or Down navigation  
key and press the Select soft key or key.  
4. Scroll to Delete All by pressing the Up or Down navigation key  
and press the Select soft key or key.  
5. To place a check mark by the memory you want to empty, All,  
Phone, SIM or SIM (FDN), press the key.  
You can remove the check mark by pressing the  
key again.  
6. When you are finished marking, press the Delete soft key to  
delete the entries in the selected memory.  
7. Enter the phone password and press the OK soft key. If you are  
deleting your SIM (FDN) contacts, please enter the PIN2  
password when prompted.  
The password is preset to “00000000” at the factory. To change this  
8. When you are finished, press the  
key.  
Note: Once contact entries have been deleted, they cannot be recovered.  
Contacts  
83  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Memory Status  
You can check how many names and numbers are stored in the  
Phonebook, in both SIM card and the phone memory. You can also  
see the capacity of both memories.  
Checking the Memory status  
You can check how many names and numbers are stored in Phone  
Book, in both the SIM card and phone’s memory. You can also see  
the capacity of both memories.  
1. Select Contacts and press the Select soft key or the  
key.  
2. Scroll to Management by pressing the Up or Down navigation  
key and press the Select soft key or key.  
3. Select the Memory Status option by pressing the Up or Down  
navigation key and press the Select soft key or  
key.  
4. When you are finished, press the Back soft key.  
Service Number  
You can view the list of Service Dialing Numbers (SDN) assigned by  
your service provider. These numbers include emergency numbers,  
directory enquiries and voice mail numbers.  
1. In Idle mode, press the Menu soft key. Select Contacts and press  
the Select soft key or key.  
2. Scroll to Service Number by pressing the Up or Down navigation  
key and press the Select soft key or key.  
3. Scroll through the numbers by using the Up or Down navigation  
key.  
4. To dial the number displayed, press the Dial soft key.  
Contacts  
84  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Note: This option is available only when your SIM card supports Service Dialing  
Numbers.  
Samsung PC Studio  
Your phone comes with Samsung’s PC Studio 1.0 software, which  
allows you to transfer Contacts between your phone and a computer.  
For more information on Samsung PC Studio 1.0, consult the online  
help provided with PC Studio 1.0.  
Contacts  
85  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Settings  
Many different features of your phone can be customized to suit your  
preferences. All of these features are accessed in the Settings menu  
(Menu 9).  
Sound Settings  
You can use the Sound Settings menu (Menu 9.1) to customize  
various settings, such as the:  
ring melody, volume and type.  
sounds made when you press a key, receive a message, or switch  
your phone on or off.  
alert tone made every minute during a call, or when your call is  
connected.  
Incoming Calls  
This menu allows you to make a selection from the following  
categories:  
Download Ring Tunes: allows you to access the Internet to  
download a new ring tune.  
Default Ring Tunes: allows you to select from the preloaded ring  
tunes.  
Downloaded Ring Tunes: allows you to select from ring tunes you  
have downloaded from the internet.  
Ring Volume: allows you to set the default volume for your ringer  
to sound when receiving an incoming call.  
Alert Type: allows you to set the alert default. Choose from  
Melody, Vibration, Vibration Then Melody or Vibration And Melody.  
Press the Up or Down navigation key to make selection. Press the  
Select soft key or the  
key to save changes.  
Settings  
86  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Keypad Tone  
This menu allows you to select the tone and volume when you press  
the keypad.  
Tone: Selects the type of keytone.  
Volume: This option allows you to adjust the keypad volume. Use  
the Right or Left navigation key to increase or decrease the volume  
Message Tone  
This menu allows you to select how the phone informs you that a  
new message has been received. You can select a different type of  
tone for different kinds of messages.  
For each message tone, the following options are available:  
Tone: you can select a message tone.  
Alert Type: you can select a type of message alert.  
Silent: the phone does not use a message tone.  
Tone: the phone sounds the selected message tone.  
Vibration: the phone vibrates.  
Vibration Then Tone: the phone vibrates then plays the  
message tone.  
Repetition: you can select how often the phone informs you of a  
new message.  
Once: the phone alerts you to a new message just once at the  
time of its receipt.  
Periodic: the phone alerts you periodically until you open the  
message.  
Press the Up or Down navigation key to make selection. Press the  
Select soft key or the  
key to save changes.  
Power On/Off  
This menu allows you to enable/disable the melody that the phone  
sounds when it is switched on and off.  
Settings  
87  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Press the Up or Down navigation key to make selection. Press the  
Select soft key or the key to save changes.  
To turn off the sound, select Off.  
Quiet Mode  
This menu item allows you to select how your phone will respond to  
calls, messages or alarms when it is in Quiet mode. You can choose:  
Vibration All: your phone will only vibrate.  
Silent All: your phone will not make a sound or vibrate.  
Press the Up or Down navigation key to make selection. Press the  
Select soft key or the  
key to save changes.  
Extra Tone  
You can customize additional tones used for the phone. Use the  
navigation keys to scroll through the list of extra tones and press the  
key to check/uncheck each option. The following options are  
available:  
Minute Minder: sets whether or not the phone beeps every minute  
during an outgoing call to keep you informed of the length of your  
call.  
Connect Tone: sets whether or not the phone to beep when your  
call is connected to the system.  
Alerts on Call: This menu allows you to choose whether or not the  
phone informs you when you receive a new message or when the  
time for an alarm comes during a call.  
Indicative Tones: sets whether or not the phone plays tone to  
inform you when you have completed the function.  
Display Settings  
In this menu (Menu 9.2), you can change various settings for the  
display or backlight.  
Settings  
88  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Wallpaper  
This menu allows you to change the display image for both the Main  
LCD and the Front LCD. The following options are available:  
Main LCD  
Download Graphics: connects you to the Internet to download new  
graphics.  
Default Wallpapers: allows you to select from the preloaded  
wallpapers. User the Left or Right navigation keys to view all  
wallpaper. Press the Select soft key or the  
key to make your  
selection.  
Downloaded Graphics: allows you to choose from the graphics  
you have downloaded to your phone. Using the Up and Down  
navigation keys, select a graphic and press the View soft key to  
display the graphic. Press the Select soft key or the  
key to  
make your selection.  
Using the Up and Down navigation keys, select a graphic and press  
the View soft key to display the graphic. Press the Select soft key  
or the  
key to make your selection.  
Text Display: allows you to select the position of the text displayed  
in Idle mode. Press the Up or Down navigation keys to make your  
selection. Choose from On or Off. Press the Select soft key or the  
key to make your selection.  
Text Color: allows you to select the color of the text to be displayed  
on the Idle screen. Press the Up or Down navigation keys to make  
your selection. Press the Select soft key or the  
key to make  
your selection.  
Front LCD  
Clock: connects you the Internet and updates the clock time.  
Cover Title: shows the title displayed on your handset. This text  
can be changed by the user. Press the Save soft key or the  
to save selection.  
key  
Wallpaper Images: allows you to select from the preloaded images  
on your phone. Use the Left and Right navigation keys to move  
Settings  
89  
Download from Www.Somanuals.com. All Manuals Search And Download.  
through the selections. Press the Select soft key or the  
key to  
save selection.  
Skin  
You can select a skin colour pattern for Menu mode. To select a skin,  
select the pattern using the Up or Down navigation keys and press  
the Select soft key.  
Brightness  
You can adjust the display brightness to see it better in different  
lighting conditions.  
Press the Left or Right navigation keys or press the Volume keys to  
adjust the brightness. To accept the changes, press the Select soft  
key.  
Front LCD Contrast  
You can adjust the display contrast to see it better in different lighting  
conditions.  
Press the Left or Right navigation keys or press the Volume keys to  
adjust the contrast. To accept the changes, press the Select soft key.  
Backlight  
In this menu, you can select the length of time for the Main LCD  
backlight and the Main LCD Dim.  
On: Settings available are: 15 Seconds, 30 Seconds, 1 Minute, 3  
Minutes, and 10 Minutes. Press the Select soft key or the  
key  
to save selection.  
Dim: Settings available are: Off, 15 Seconds, 30 Seconds, 1  
Minute, and 3 Minutes. Press the Select soft key or the  
key to  
save selection.  
Settings  
90  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Dialing Display  
In this menu, you can select the dialing font color. Choose Black or  
Rainbow. Press the Select soft key or the  
key to save selection.  
Front LCD  
You can turn the Front LCD display off or on. the display brightness  
to see it better in different lighting conditions.  
Press the Up or Down navigation keys or press the Volume keys to  
turn the Front LCD display Off or On. Press the Select soft key or the  
key to save selection.  
Time & Date  
Use this menu (Menu 9.3) to configure the settings for the time and  
date display.  
Set Time: allows you to enter the current time using your keypad.  
Press the Set soft key to save. Use the Up or Down navigation key  
to select AM or PM. Press the Select soft key or the  
key to save  
selection.  
Set Date: allows you to enter the current date using your keypad.  
Press the Set soft key to save.  
Time Format: allows you to change the time format to 12 hours or  
24 hours. Use the Up or Down navigation key to select either 24  
Hours or 12 Hours. Press the Select soft key to save.  
Auto Update: allows you to receive time information from your  
service provider’s network. Use the Up or Down navigation key to  
set Auto Update.  
Off: you need to manually set the time and date according to the  
current time zone using the Set time menu.  
On: the phone automatically updates the time and date  
according to the current time zone using the network service.  
Confirm First: the phone asks for a confirmation before the  
update.  
Settings  
91  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Press the Select soft key or the  
key to save your Time & Date  
settings.  
Note: Automatic updates of time and date does not change the time you have set for  
alarm settings or calendar memos.  
Phone Settings  
Use this menu (Menu 9.4) to configure the settings for how the  
phone operates.  
Language  
You can select a display language. You can set the Text Language or  
the Input Mode. When the language option is set to Automatic, the  
language is automatically selected according to the language of the  
SIM card used.  
The Input Mode sets the language used when entering text into the  
phone.  
Depending on your country, service provider, or the software version  
of the phone, the Automatic option may not display.  
Press the Select soft key or the  
key to save selection.  
Greeting Message  
This menu allows you to set a greeting to be displayed briefly when  
the phone is switched on. For details about entering characters, see  
Settings  
92  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Extra Settings  
You can turn the automatic redialling or answering features on or off.  
To turn a feature  
on  
Press the  
key. A check mark displays in front of the  
option.  
off  
key. The check mark no longer displays.  
The following options are available:  
Auto Redial: when this option is checked, the phone makes up to  
ten attempts to redial a phone number after an unsuccessful call.  
Note: The interval between two attempts varies.  
Anykey Answer: when this option is checked, you can answer an  
incoming call by pressing any key, except the  
key and the  
Reject soft key. To reject the call, press the  
key or the Reject  
soft key. When this option is unchecked, you can only press the  
key or Accept soft key.  
Open to Answer: when this option is checked, you can simply open  
the phone to answer a call. When it is unchecked, you must open  
the phone and press a key to answer a call, depending on the  
setting of the Anykey Answer option.  
TTY Settings  
TTY (also known as a TDD or Text Telephone) is a  
telecommunications device that allows people who are deaf or hard  
of hearing, or who have speech or language disabilities, to  
communicate via a telephone.  
Settings  
93  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Note: The TTY option is viewable only when inserting the TTY Adaptor into the headset  
jack on the left side of your phone.  
Use the following steps to access the TTY settings:  
1. In Idle mode, press the Menu soft key to access Menu mode, and  
select Settings. Press the Select soft key or the  
key.  
2. Press the key (this will not be shown in the menu), and then  
highlight the enable selection. Key in the password 4-T-T-Y  
(4889) and press the OK soft key.  
The following options are available:  
Enable: CTM is active and TTY is available for use.  
Disable: CTM is not available for use.  
Network Services  
Use this menu (Menu 9.5) to customize the settings for network  
features, such as call diverting, call barring, and call waiting.  
Call Forwarding  
Call Forwarding enables incoming calls to be rerouted to a number  
that you specify. For example, you could divert your business calls to  
a colleague while you are on holidays.  
You can use the following options to forward voice calls and/or data  
calls:  
Forward Always: all calls are forwarded.  
Busy: calls are forwarded when you are already on another call.  
No Reply: calls are forwarded when you do not answer the phone.  
Unreachable: calls are forwarded when you are not in an area  
covered by your service provider.  
Cancel All: all call forwarding options are canceled.  
To set your call forwarding options.:  
Settings  
94  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
1. Select a call diverting option by pressing the Up or Down  
navigation key, and then press the Select soft key.  
2. Select the type of calls, Voice calls or Data calls, by pressing the  
Up or Down navigation key, and then press the Select soft key.  
The current status displays. If the option has already been set, the  
number to which the calls are diverted displays.  
To  
Select  
activate call diverting  
Activate  
deactivate call diverting  
Deactivate  
3. In the Divert to field, enter the number to which the calls are to be  
diverted and press the Select soft key.  
To enter an international code, press the  
displays.  
key until the + sign  
The phone sends your settings to the network and the network’s  
acknowledgement displays.  
If you selected No reply, move to the Sec line and select the  
length of time the network delays before diverting a call.  
You can deactivate all call diverting settings by selecting the Cancel  
all option.  
Call Barring  
The Call Barring service allows you to restrict different types of calls  
from being made or received. For example, you could restrict all  
voice calls being made to International phone numbers. For each  
option, you can restrict whether to ban voice calls or data calls.  
The following call-barring options are available:  
All Outgoing: bars this phone from making outgoing calls.  
Settings  
95  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
International: bars this phone from making calls to international  
numbers.  
International Except For Home: bars this phone from making  
international calls except to home.  
All Receiving: Blocks all incoming calls.  
Receiving While Abroad: blocks all incoming calls when abroad  
Cancel All: clears your call barring options.  
Change Barring Password: allows you to change the password  
used to set your call barring options.  
To set your call barring options:  
1. Select the type of calls you want to bar by pressing the Up or  
Down navigation key, and then press the Select soft key.  
2. Select whether you want to bar Voice Calls or Data Calls, and  
then press the Select soft key.  
The screen informs you whether call barring is activated or  
deactivated.  
3. Activate or deactivate the call barring feature as necessary by  
selecting either Activate or Deactivate.  
4. Enter your phone password. For more details about your phone’s  
To return to the previous screen, press the Back soft key.  
You can also deactivate all call barrings by selecting the Cancel  
All option.  
Call Waiting  
The Call Waiting service informs you when someone is trying to  
reach you during another call. You can specify individual call waiting  
option for voice calls and/or data calls.  
To set your call waiting options:  
Settings  
96  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
1. Select the type of calls, voice or data, to which you want to apply  
the call waiting option by pressing the Up or Down navigation  
key, and then press the Select soft key.  
The screen informs you whether call waiting is activated or  
deactivated.  
2. You can activate or deactivate the call waiting feature as  
necessary by selecting either Activate or Deactivate.  
3. To return to the previous screen, press the Back soft key.  
You can also deactivate all call waiting settings by selecting the  
Cancel All option.  
Network Selection  
The Network Selection feature enables you to automatically or  
manually select the network used when roaming outside of your  
home area.  
Note: You can select a network other than your home network only if there is a valid  
roaming agreement between them.  
To change your network selection:  
1. In the Network Selection menu, select either Automatic or  
Manual and press the Select soft key.  
If you select Automatic, you are connected to the first available  
network when roaming.  
If you select Manual, the phone scans for the available  
networks. Go to step 2.  
2. Press the Up or Down navigation keys until the network you want  
is highlighted and then press the Select soft key.  
Settings  
97  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
You are connected to that network.  
Caller ID  
You can prevent your phone number from being displayed on the  
phone of the person being called.  
Note: Some networks do not allow the user to change this setting.  
The following options are available:  
Set by Network: the default setting provided by the network is  
used.  
Hide Number: your number does not display on the other person’s  
phone.  
Show Number: your number is sent each time you make a call.  
Band Selection  
For the phone to make and receive phone calls, it must register with  
an available network. Your phone can handle any of the following  
types of networks:  
GSM 850/1900  
GSM 900/1800  
Automatic  
The country where you purchased your phone determines the default  
band that it uses. When you travel abroad, you must remember to  
change to an appropriate band.  
1. From the Network Services menu screen, select Band Selection.  
2. Select the appropriate network band, and press the Select soft  
key or the  
key.  
3. When the display confirms the network band you selected, press  
the Yes soft key or the  
key.To cancel the selection, press the  
No soft key.  
Settings  
98  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Bluetooth  
Bluetooth (Menu 9.6) is a short-range wireless communications  
technology capable of exchanging information over a distance of  
about 30 feet without requiring a physical connection.  
Unlike infrared, you don't need to line up the devices to beam  
information with Bluetooth. If the devices are within a range of one  
another, you can exchange information between them, even if they  
are located in different rooms.  
The following Bluetooth options are available:  
Turn Bluetooth On/Off  
This option allows you to turn Bluetooth on or off. As soon as you  
turn Bluetooth on, it begins to search for new Bluetooth Devices.  
When the Bluetooth is turned on, you can use the Bluetooth features  
available. When the Bluetooth is turned off, you cannot send or  
receive information via Bluetooth.  
Tip: To save battery life or in situations where Bluetooth use is prohibited, such as airline  
traveling, you can turn off the Bluetooth wireless technology headset.  
My Headsets  
This menu provides a list of Bluetooth wireless technology devices  
discovered by your handset. Highlight Search New Headset and  
press the Select soft key or the  
key. The phone will search for  
available devices.  
Searching for and pairing with a Bluetooth device  
1. From the Bluetooth setting options, select My Headsets.  
2. Select Search New Headset.  
Settings  
99  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
After searching, a list of devices to which you can connect  
displays. The colour of the icon indicates the status of the device:  
Blue for paired devices  
Red for devices that are currently connected to your phone  
3. Select a device.  
4. Enter a Bluetooth PIN code and press the OK soft key. This code  
is used just once and you don’t need to memorize it. The default  
PIN for your phone is 0000. When the owner of the other device  
enters the same code, pairing is finished.  
Bluetooth Services  
The Bluetooth specification is a protocol that describes how the  
short-range wireless technology works, whereas individual profiles  
describe the services supported by individual devices. Profiles  
reduce the chance that different devices will not work together.  
The following Service profiles are available:  
Headset: The remote Bluetooth headset enables outgoing and  
incoming calls.  
Handsfree: The remote Bluetooth car kit enables outgoing and  
incoming calls.  
Security  
The Security menu (Menu 9.7) enables you to restrict the use of your  
phonetoothersandthetypesofcalls.Variouscodesandpasswordsare  
used to protect the features of your phone. They are described in the  
following sections. Also see “Access Codes” on page 105.  
PIN Check  
When the PIN check feature is enabled, you must enter your PIN each  
time you switch the phone on. Consequently, any person who does  
not have your PIN cannot use your phone without your approval.  
Settings  
100  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Note: Before disabling the PIN Check feature, you must enter your PIN.  
The following options are available:  
Disable: the phone connects directly to the network when you  
switch it on.  
Enable: you must enter the PIN each time the phone is switched  
on.  
Change PIN  
This feature allows you to change your current PIN to a new one,  
provided that the PIN Check feature is enabled. You must enter the  
current PIN before you can specify a new one. Once you have entered  
a new PIN, you are asked to confirm it by entering it again.  
Phone Lock  
When the Phone Lock feature is enabled, the phone is locked and you  
must enter an 8-digit phone password each time the phone is  
switched on.  
The password is preset to “00000000” at the factory. To change the  
phone password, see the Change Password menu (Menu 9.7.4)  
below.  
Once the correct password has been entered, you can use the phone  
until you switch it off.  
The following options are available:  
Disable: you are not asked to enter the phone password when you  
switch the phone on.  
Enable: you are required to enter the phone password when you  
switch the phone on.  
Settings  
101  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Change Password  
The Change Password feature allows you to change your current  
phone password to a new one. You must enter the current password  
before you can specify a new one.  
The password is preset to “00000000” at the factory. Once you have  
entered a new password, you are asked to confirm it by entering it  
again.  
Lock Applications  
Using this menu, you can select Lock All, Contacts, Call History,  
Text Message, Multimedia Message, , Downloaded Graphics, and  
Audio. Once you have locked the contents, you must enter the  
phone’s password to access the associated menus.  
Note: The password is preset to “00000000” at the factory.  
SIM Lock  
When the SIM lock feature is enabled, your phone only works with  
the current SIM card.  
To enable the SIM lock, you must enter the current SIM lock code.  
Once you have entered the SIM lock code, you must confirm by  
entering it again.  
To unlock your SIM card, you must re-enter the SIM lock code.  
FDN Mode  
FDN (Fixed Dial Number) Mode, if supported by your SIM card,  
allows you to restrict your outgoing calls to a limited set of phone  
numbers.  
The following options are available:  
Disable: you can call any number.  
Settings  
102  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
Enable: you can only call phone numbers stored in the FDN list.  
The FDN list is a separate address book and is managed separately  
from the normal Contacts list. You must enter your PIN2.  
Note: Not all SIM cards have a PIN2. If your SIM card does not, this menu does not  
display. Furthermore, PIN2 is specific to a SIM card and you will need to ask the issuer of  
the SIM card for the PIN2 code.  
Change PIN2  
The Change PIN2 feature allows you to change your current PIN2 to a  
new one. You must enter the current PIN2 before you can specify a  
new one. Once you have entered a new PIN2, you are asked to  
confirm it by entering it again.  
Note: Not all SIM cards have a PIN2. If your SIM card does not, this menu does not  
display.  
Reset Settings  
You can easily reset your phone to its default settings. To reset your  
phone:  
1. In Idle mode, press the Menu soft key to access Menu mode.  
2. Select Settings and highlight Reset Settings. Press the Select  
soft key or the  
key.  
3. Choose from the following:  
All  
Phone Settings  
Display Settings  
Sound Settings  
4. Press the  
key to check/uncheck your selection  
Settings  
103  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
5. When you are finished, press the Reset soft key.  
6. At the “Reset Settings?” prompt, press the Yes soft key to reset.  
7. Enter the 4- to 8-digit password and press the OK soft key or the  
key.  
Note: The password is preset to “00000000.” To change this password, see “Change  
Settings  
104  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Access Codes  
There are several access codes that are used by your phone and its  
SIM card. These codes help you protect the phone against  
unauthorized use.  
When requested for any of the codes explained below, enter the  
appropriate code (displayed as asterisks) and press the OK soft key.  
If you make a mistake, press  
one or more times until the  
incorrect digit is cleared and then continue entering the correct code.  
The access codes, except for the PUK and PUK2 codes, can be  
changed using the Security menu (Menu 9.7). See page 100 for  
further details.  
Important! Avoid using access codes resembling emergency numbers, such as 911, so  
that you do not accidentally dial an emergency number.  
Phone Password  
The Phone Lock feature uses the phone password to protect your  
phone against unauthorized use. The phone password is supplied  
with the phone and is preset to “00000000” at the factory.  
To  
See  
activate/deactivate the Phone  
Lock feature  
9.7.3).  
change the phone password  
(Menu 9.7.4).  
Access Codes  
105  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
PIN  
The Personal Identification Number or PIN (4 to 8 digits) protects  
your SIM card against unauthorized use. It is usually supplied with  
the SIM card.  
If you enter an incorrect PIN three times in succession, the code is  
disabled and cannot be used until you re-enable it by entering the  
PUK (see below).  
To  
See  
activate/deactivate the PIN Check  
feature  
page 100 (Menu 9.7.1).  
change the PIN  
page 101 (Menu 9.7.2).  
PUK  
The 8-digit PUK (PIN Unblocking Key) is required to change a  
disabled PIN. The PUK may be supplied with the SIM card. If not, or  
you have lost it, contact your service provider.  
To re-enable your PIN:  
1. Enter the PUK and press the OK soft key.  
2. Enter a new PIN of your choice and press the OK soft key.  
3. When the Confirm New PIN message displays, enter the same  
code again and press the OK soft key.  
If you enter an incorrect PUK ten times in succession, the SIM card  
becomes invalid. Contact your service provider for a new card.  
PIN2  
The PIN2 (4 to 8 digits), supplied with some SIM cards, is required to  
access specific functions, such as setting the maximum cost of a  
call. These functions are available if supported by your SIM card.  
Access Codes  
106  
Download from Www.Somanuals.com. All Manuals Search And Download.  
           
If you enter an incorrect PIN2 three times in succession, the code is  
disabled and you cannot access the functions until you re-enable it  
by entering the PUK2.  
To change the PIN2, see page 103 (Menu 9.7.8).  
PUK2  
The 8-digit PUK2 (PIN Unblocking Key 2), supplied with some SIM  
cards, is required to change a disabled PIN2. If you lose the code,  
contact your service provider.  
To re-enable your PIN2:  
1. Enter the PUK2 and press the OK soft key.  
2. Enter a new PIN2 of your choice and press the OK soft key.  
3. When the Confirm New PIN2 message displays, enter the same  
code again and press the OK soft key.  
If you enter an incorrect PUK2 ten times in succession, you will not  
be able to access the functions requiring the PIN2. Contact your  
service provider for a new card.  
Access Codes  
107  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Solving Problems  
If you are experiencing problems with your phone, perform the  
following simple checks before contacting a service professional.  
This may save you the time and expense of an unnecessary service  
call.  
When you switch your phone on, the following messages may  
appear:  
Insert SIM Card  
Check that the SIM card is correctly installed.  
Phone Locked Enter Password  
The automatic locking function has been enabled. You must enter  
the phone’s password before you can use the phone. The factory  
preset code is "00000000".  
Enter PIN  
You are using your phone for the first time. You must enter the  
Personal Identification Number (PIN) supplied with the SIM card.  
The PIN Check feature is enabled. Every time the phone is switched  
on, the PIN has to be entered. To disable this feature, use the PIN  
Check menu (Menu 9.7.1).  
Enter PUK  
The PIN code was entered incorrectly three times in succession  
and the phone is now blocked. Enter the PUK supplied by your  
service provider. There is a PUK1 and a PUK2 code. Please make  
sure you know which one is locked and apply the correct PUK  
code.  
Solving Problems  
108  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
“No service,” “Network failure” or “Not done”  
displays  
The network connection was lost. You may be in a weak signal area  
(in a tunnel or surrounded by buildings). Move and try again.  
You are trying to access an option for which you have not taken  
out a subscription with your service provider. Contact the service  
provider for further details.  
You have entered a number but it was not dialed  
Have you pressed the  
key?  
Are you accessing the right cellular network?  
details)  
Your correspondent cannot reach you  
Is your phone switched on (the  
key pressed for more than one  
second)?  
Are you accessing the right cellular network?  
details)  
Has your phone been call forwarded to another number?  
Your correspondent cannot hear you speaking  
Have you switched off the microphone?  
Are you holding the phone close enough to your mouth? The  
microphone is located at the bottom of the phone.  
The phone starts beeping and “**Warning** Low  
Battery” flashes on the display  
Your battery is insufficiently charged. Recharge the battery.  
Solving Problems  
109  
Download from Www.Somanuals.com. All Manuals Search And Download.  
The audio quality of the call is poor  
Check the signal strength indicator on the display (  
); the  
number of bars indicates the signal strength from strong (  
weak ( ).  
) to  
Try moving the phone slightly or move closer to a window if you  
are in a building.  
No number is dialed when you recall an Contact list  
entry  
Check that the number has been stored correctly, by using the  
Contact list Search feature.  
Re-store the number, if necessary.  
If the above guidelines do not help you to solve the problem,  
take note of:  
the model and serial numbers of your phone  
your warranty details  
a clear description of the problem  
Then contact your local dealer or Samsung after-sales service.  
Solving Problems  
110  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Health and Safety Information  
Exposure to Radio Frequency (RF) Signals  
Your wireless phone is a radio transmitter and receiver. It is designed  
and manufactured not to exceed the emission limits for exposure to  
radio frequency (RF) energy set by the Federal Communications  
Commission (FCC) of the U.S. Government. These limits are part of  
comprehensive guidelines and establish permitted levels of RF  
energy for the general population. The guidelines are based on the  
safety standards that were developed by independent scientific  
organizations through periodic and thorough evaluation of scientific  
studies.  
The standards include a substantial safety margin designed to assure  
the safety of all persons, regardless of age and health.  
The exposure standard for wireless phones employs a unit of  
measurement known as Specific Absorption Rate (SAR). The SAR  
*
limit recommended by the FCC is 1.6W/kg.  
SAR tests are conducted using standard operating positions  
specified by the FCC with the phone transmitting at its highest  
certified power level in all tested frequency bands. Although the SAR  
is determined at the highest certified power level, the actual SAR level  
of the phone while operating can be well below the maximum value.  
This is because the phone is designed to operate at multiple power  
levels so as to use only the power required to reach the network. In  
*. In the U.S. and Canada, the SAR limit for mobile  
phones used by the public is 1.6 watts/kg (W/kg) aver-  
aged over one gram of tissue. The standard incorpo-  
rates a substantial margin of safety to give additional  
protection for the public and to account for any varia-  
tions in measurements.  
Health and Safety Information  
111  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
general, the closer you are to a wireless base station antenna, the  
lower the power output of the phone.  
Before a new model phone is available for sale to the public, it must  
be tested and certified by the FCC that it does not exceed the limit  
established by the government adopted requirement for safe  
exposure. The tests are performed in positions and locations (e.g., at  
the ear and worn on the body) as required by the FCC for each model.  
While there may be differences between the SAR levels of various  
phones and at various positions, they all meet the government  
requirement.  
The FCC has granted an Equipment Authorization for this model  
phone with all reported SAR levels evaluated as in compliance with  
the FCC RF exposure guidelines. SAR information on this model  
phone is on file with the FCC and can be found under the Display  
Grant section of http:// www.fcc.gov/oet/fccid after searching on FCC  
ID printed in the label on the phone.  
For Body Operation  
For body worn operation, this model phone has been tested and  
meets the FCC RF exposure guidelines when used with a Samsung-  
supplied or approved accessory designated for this product or when  
used with an accessory that contains no metal and that positions the  
handset a minimum from the body.  
The minimum distance from the body for this model phone is written  
in the FCC certification information. Non-compliance with the above  
conditions may violate FCC RF exposure guidelines.  
For more Information concerning exposure to radio frequency  
signals, see the following websites:  
Federal Communications Commission (FCC)  
•http://www.fcc.gov  
Cellular Telecommunications Industry Association (CTIA):  
•http://www.ctia.org  
U.S.Food and Drug Administration (FDA)  
Health and Safety Information  
112  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
•http://www.fda.gov/cdrh/consumer  
World Health Organization (WHO)  
•http://www.who.int/peh-emf/en  
Precautions When Using Batteries  
Never use any charger or battery that is damaged in any way.  
Use the battery only for its intended purpose.  
If you use the phone near the network’s base station, it uses less  
power; talk and standby time are greatly affected by the signal  
strength on the cellular network and the parameters set by the  
network operator.  
Battery charging time depends on the remaining battery charge,  
the type of battery and the charger used. The battery can be  
charged and discharged hundreds of times, but it will gradually  
wear out. When the operation time (talk time and standby time) is  
noticeably shorter than normal, it is time to buy a new battery.  
If left unused, a fully charged battery will discharge itself over time.  
Use only Samsung-approved batteries and recharge your battery  
only with Samsung-approved chargers. When a charger is not in  
use, disconnect it from the power source.  
Do not leave the battery connected to a charger for more than a  
week, since overcharging may shorten its life.  
Extreme temperatures will affect the charging capacity of your  
battery: it may require cooling or warming first.  
Do not leave the battery in hot or cold places, such as in a car in  
summer or winter conditions, as you will reduce the capacity and  
lifetime of the battery. Always try to keep the battery at room  
temperature. A phone with a hot or cold battery may temporarily  
not work, even when the battery is fully charged. Li-ion batteries  
°
°
are particularly affected by temperatures below 0 C (32 F).  
Do not short-circuit the battery. Accidental short-circuiting can  
occur when a metallic object (coin, clip or pen) causes a direct  
connection between the + and terminals of the battery (metal strips  
on the battery), for example when you carry a spare battery in a  
pocket or bag. Shortcircuiting the terminals may damage the  
battery or the object causing the short-circuiting.  
Health and Safety Information  
113  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Dispose of used batteries in accordance with local regulations.  
Always recycle. Do not dispose of batteries in a fire.  
Operating Environment  
Remember to follow any special regulations in force in any area and  
always switch your phone off whenever it is forbidden to use it, or  
when it may cause interference or danger.  
When connecting the phone or any accessory to another device, read  
its user’s guide for detailed safety instructions. Do not connect  
incompatible products.  
As with other mobile radio transmitting equipment, users are advised  
that for the satisfactory operation of the equipment and for the safety  
of personnel, it is recommended that the equipment should only be  
used in the normal operating position (held to your ear with the  
antenna pointing over your shoulder).  
Electronic Devices  
Most modern electronic equipment is shielded from radio frequency  
(RF) signals. However, certain electronic equipment may not be  
shielded against the RF signals from your wireless phone. Consult  
the manufacturer to discuss alternatives.  
Pacemakers  
Pacemaker manufacturers recommend that a minimum distance of  
15 cm (6 inches) be maintained between a wireless phone and a  
pacemaker to avoid potential interference with the pacemaker. These  
recommendations are consistent with the independent research and  
recommendations of Wireless Technology Research.  
Persons with pacemakers:  
should always keep the phone more than 15 cm (6 inches) from  
their pacemaker when the phone is switched on.  
should not carry the phone in a breast pocket.  
Health and Safety Information  
114  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
should use the ear opposite the pacemaker to minimize potential  
interference.  
If you have any reason to suspect that interference is taking place,  
switch your phone off immediately.  
Hearing Aids  
Some digital wireless phones may interfere with some hearing aids.  
In the event of such interference, you may wish to consult your  
hearing aid manufacturer to discuss alternatives.  
Other Medical Devices  
If you use any other personal medical devices, consult the  
manufacturer of your device to determine if it is adequately shielded  
from external RF energy. Your physician may be able to assist you in  
obtaining this information. Switch your phone off in health care  
facilities when any regulations posted in these areas instruct you to  
do so. Hospitals or health care facilities may be using equipment that  
could be sensitive to external RF energy.  
Vehicles  
RF signals may affect improperly installed or inadequately shielded  
electronic systems in motor vehicles. Check with the manufacturer or  
its representative regarding your vehicle. You should also consult the  
manufacturer of any equipment that has been added to your vehicle.  
You should also consult the manufacturer of any equipment that has  
been added to your vehicle.  
Posted Facilities  
Switch your phone off in any facility where posted notices require  
you to do so.  
Health and Safety Information  
115  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Potentially Explosive Environments  
Switch your phone off when in any area with a potentially explosive  
atmosphere and obey all signs and instructions. Sparks in such areas  
could cause an explosion or fire resulting in bodily injury or even  
death.  
Users are advised to switch the phone off while at a refueling point  
(service station). Users are reminded of the need to observe  
restrictions on the use of radio equipment in fuel depots (fuel storage  
and distribution areas), chemical plants or where blasting operations  
are in progress.  
Areas with a potentially explosive atmosphere are often but not  
always clearly marked. They include the areas below deck on boats,  
chemical transfer or storage facilities, vehicles using liquefied  
petroleum gas (such as propane or butane), areas where the air  
contains chemicals or particles, such as grain, dust or metal  
powders, and any other area where you would normally be advised to  
turn off your vehicle engine.  
Emergency Calls  
This phone, like any wireless phone, operates using radio signals,  
wireless and landline networks as well as user-programmed  
functions, which cannot guarantee connection in all conditions.  
Therefore, you should never rely solely on any wireless phone for  
essential communications (medical emergencies, for example).  
Remember, to make or receive any calls the phone must be switched  
on and in a service area with adequate signal strength. Emergency  
calls may not be possible on all wireless phone networks or when  
certain network services and/or phone features are in use. Check with  
local service providers.  
To make an emergency call:  
1. If the phone is not on, switch it on.  
Health and Safety Information  
116  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
2. Key in the emergency number for your present location (for  
example, 911 or other official emergency number). Emergency  
numbers vary by location.  
3. Press the  
key.  
If certain features are in use (call barring, for example), you may first  
need to deactivate those features before you can make an emergency  
call. Consult this document and your local cellular service provider.  
When making an emergency call, remember to give all the necessary  
information as accurately as possible. Remember that your phone  
may be the only means of communication at the scene of an  
accident; do not cut off the call until given permission to do so.  
Other Important Safety Information  
Only qualified personnel should service the phone or install the  
phone in a vehicle. Faulty installation or service may be dangerous  
and may invalidate any warranty applicable to the device.  
Check regularly that all wireless phone equipment in your vehicle is  
mounted and operating properly.  
Do not store or carry flammable liquids, gases or explosive  
materials in the same compartment as the phone, its parts or  
accessories.  
For vehicles equipped with an air bag, remember air bag inflates  
with great force. Do not place installed or portable wireless  
equipment in the area over the air bag or in the air bag deployment  
area. If wireless equipment is improperly installed, and the air bag  
inflates, serious injury could result.  
Switch your phone off before boarding an aircraft. The use of  
wireless phones in aircraft is illegal unless permitted and may be  
dangerous to the aircraft’s operation.  
Failure to observe these instructions may lead to the suspension or  
denial of telephone services to the offender, legal action, or both.  
Health and Safety Information  
117  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Care and Maintenance  
Your phone is a product of superior design and craftsmanship and  
should be treated with care. The suggestions help you fulfill any  
warranty obligations and allow enjoy this product for many years:  
Keep the phone and all its parts and accessories out of reach of  
small children.  
Keep the phone dry. Precipitation and humidity contain minerals  
that may corrode electronic circuits.  
Do not use the phone with a wet hand. Doing so may cause an  
electric shock to you or damage to the phone.  
Do not use or store the phone in dusty or dirty areas. Moving parts  
may become damaged or clogged.  
Do not store the phone in hot areas. High temperatures can  
shorten the life of electronic devices, damage batteries, and warp  
or melt certain plastics.  
Do not store the phone in cold areas. When the phone warms up to  
its normal operating temperature, moisture can form inside the  
phone, which may damage the phone’s electronic circuit boards.  
Do not drop, knock or shake the phone. Rough handling can break  
internal circuit boards.  
Do not use harsh chemicals, cleaning solvents or strong  
detergents to clean the phone. Wipe it with a soft cloth slightly  
dampened in a mild soap-and-water solution.  
Do not paint the phone. Paint can clog the device’s moving parts  
and prevent proper operation.  
Do not put the phone in or on heating devices, such as a  
microwave oven, a stove or a radiator. The phone may explode  
when overheated.  
Use only the supplied or an approved replacement antenna.  
Unauthorized antennas or modified accessories may damage the  
phone and violate regulations governing radio devices.  
If the phone, battery, charger or any accessory is not working  
properly, take it to your nearest qualified service facility. The  
personnel there will assist you, and if necessary, arrange for  
service.  
Health and Safety Information  
118  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
FCC Notice  
Cautions  
Modifications not expressly approved by the party responsible for  
compliance could void the user's authority to operate the equipment.  
FCC Compliance Information  
This device complies with Part 15 of FCC Rules. Operation is subject  
to the following two conditions:  
1. This device may not cause harmful interference, and  
2. This device must accept any interference received.  
Including interference that may cause undesired operation.  
Information to User  
This equipment has been tested and found to comply with the limits  
for a Class B digital device, pursuant to part 15 of the FCC Rules.  
These limits are designed to provide reasonable protection against  
harmful interference in a residential installation.  
This equipment generates, uses and can radiate radio frequency  
energy and, if not installed and used in accordance with the  
instructions, may cause harmful interference to radio  
communications. However, there is no guarantee that interference  
will not occur in a particular installation. If this equipment does cause  
harmful interference to radio or television reception, which can be  
determined by turning the equipment off and on, the user is  
encouraged to try to correct the interference by one or more of the  
following measures:  
Reorient or relocate the receiving antenna.  
Increase the separation between the equipment and receiver.  
Health and Safety Information  
119  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Connect the equipment into an outlet on a circuit different from  
that to which the receiver is connected.  
Consult the dealer or an experienced radio/ TV technician for help.  
Appendix A: CERTIFICATION INFORMATION  
(SAR)  
THIS MODEL PHONE MEETS THE GOVERNMENT’S REQUIREMENTS  
FOR EXPOSURE TO RADIO WAVES.  
Your wireless phone is a radio transmitter and receiver. It is designed  
and manufactured not to exceed the emission limits for exposure to  
radio frequency (RF) energy set by the Federal Communications  
Commission of the U.S. Government. These limits are part of  
comprehensive guidelines and establish permitted levels of RF  
energy for the general population. The guidelines are based on safety  
standards that were developed by independent scientific  
organizations through periodic and thorough evaluation of scientific  
studies. The standards include a substantial safety margin designed  
to assure the safety of all persons, regardless of age and health.  
The exposure standard for wireless mobile phones employs a unit of  
measurement known as the Specific Absorption Rate (SAR). The  
**  
SAR limit set by the FCC is 1.6 W/kg . SAR Tests are conducted  
using standard operating positions accepted by the FCC with the  
phone transmitting at its highest certified power level in all tested  
frequency bands. Although the SAR is determined at the highest  
certified power level, the actual SAR level of the phone while  
operating can be well below the maximum value. This is because the  
phone is designed to operate at multiple power levels so as to use  
**. In the United States and Canada, the SAR limit for mobile  
phones used by the public is 1.6 watts/kilogram (W/kg) averaged over  
one gram of tissue. The standard incorporates a substantial margin of  
safety to give additional protection for the public and to account for any  
variations in measurements.  
Health and Safety Information  
120  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
only the power required to reach the network. In general, the closer  
you are to a wireless base station antenna, the lower the power  
output.  
Before a new model phone is available for sale to the public, it must  
be tested and certified by the FCC that it does not exceed the limit  
established by the government adopted requirement for safe  
exposure. The tests are performed in positions and locations(e.g., at  
the ear and worn on the body) as required by the FCC for each model.  
The highest SAR values of this model phone as reported to FCC are:  
GSM850  
Head: 1.51 W/Kg  
Body: 1.11 W/Kg  
GSM1900  
Head: 1.17 W/Kg  
Body: 0.513 W/Kg  
Body-worn operations are restricted to Samsung-supplied, approved  
or non-Samsung designated accessories that have no metal and  
must provide at least 1.5cm separation between the device, including  
its antenna whether extended or retracted, and the user’s body. Non-  
compliance to the above restrictions may violate FCC RF exposure  
guidelines.  
The FCC has granted an Equipment Authorization for this model  
phone with all reported SAR levels evaluated as in compliance with  
the FCC RF exposure guidelines. SAR information on this model  
phone (C327) is on file with the FCC and can be found under the  
Display Grant section of http:// www.fcc.gov/oet/fccid.  
Appendix B: Safe and Responsible Wireless  
Phone Use  
Cellular Telecommunications & Internet Association  
“Safety is the most important call you will ever make.”  
Health and Safety Information  
121  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
A Guide to Safe and Responsible Wireless Phone Use  
Tens of millions of people in North America today take advantage of  
the unique combination of convenience, safety and value delivered by  
the wireless telephone. Quite simply, the wireless phone gives people  
the powerful ability to communicate by voice-almost anywhere,  
anytime with the boss, with a client, with the kids, with emergency  
personnel or even with the police. Each year, North Americans make  
billions of calls from their wireless phones, and the numbers are  
rapidly growing.  
But an important responsibility accompanies those benefits, one that  
every wireless phone user must uphold. When driving a car, driving  
is your first responsibility. A wireless phone can be an invaluable  
tool, but good judgment must be exercised at all times while driving a  
motor vehicle whether on the phone or not.  
The basic lessons are ones we all learned as teenagers. Driving  
requires alertness, caution and courtesy. It requires a heavy dose of  
basic common sense-keep your head up, keep your eyes on the road,  
check your mirrors frequently and watch out for other drivers. It  
requires obeying all traffic signs and signals and staying within the  
speed limit. It means using seat belts and requiring other passengers  
to do the same.  
But with wireless phone use, driving safely means a little more. This  
brochure is a call to wireless phone users everywhere to make safety  
their first priority when behind the wheel of a car. Wireless  
telecommunications is keeping us in touch, simplifying our lives,  
protecting us in emergencies and providing opportunities to help  
others in need. When it comes to the use of wireless phones, safety  
is your most important call.  
Health and Safety Information  
122  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Wireless Phone “Safety Tips”  
Below are safety tips to follow while driving and using a wireless  
phone which should be easy to remember:  
1. Get to know your wireless phone and its features such as speed  
dial and redial. Carefully read your instruction manual and learn  
to take advantage of valuable features most phones offer,  
including automatic redial and memory. Also, work to memorize  
the phone keypad so you can use the speed dial function without  
taking your attention off the road.  
2. When available, use a hands free device. A number of hands free  
wireless phone accessories are readily available today. Whether  
you choose an installed mounted device for your wireless phone  
or a speaker phone accessory, take advantage of these devices if  
available to you.  
3. Position your wireless phone within easy reach. Make sure you  
place your wireless phone within easy reach and where you can  
grab it without removing your eyes from the road. If you get an  
incoming call at an inconvenient time, if possible, let your voice  
mail answer it for you.  
4. Suspend conversations during hazardous driving conditions or  
situations. Let the person you are speaking with know you are  
driving; if necessary, suspend the call in heavy traffic or  
hazardous weather conditions. Rain, sleet, snow and ice can be  
hazardous, but so is heavy traffic. As a driver, your first  
responsibility is to pay attention to the road.  
5. Do not take notes or look up phone numbers while driving. If you  
are reading an Contact list or business card, or writing a to do list  
while driving a car, you are not watching where you are going. It’s  
common sense. Don’t get caught in a dangerous situation  
Health and Safety Information  
123  
Download from Www.Somanuals.com. All Manuals Search And Download.  
because you are reading or writing and not paying attention to the  
road or nearby vehicles.  
6. Dial sensibly and assess the traffic; if possible, place calls when  
you are not moving or before pulling into traffic. Try to plan your  
calls before you begin your trip or attempt to coincide your calls  
with times you may be stopped at a stop sign, red light or  
otherwise stationary. But if you need to dial while driving, follow  
this simple tip-dial only a few numbers, check the road and your  
mirrors, then continue.  
7. Do not engage in stressful or emotional conversations that may  
be distracting. Stressful or emotional conversations and driving  
do not mix-they are distracting and even dangerous when you are  
behind the wheel of a car. Make people you are talking with aware  
you are driving and if necessary, suspend conversations which  
have the potential to divert your attention from the road.  
8. Use your wireless phone to call for help. Your wireless phone is  
one of the greatest tools you can own to protect yourself and your  
family in dangerous situations-with your phone at your side, help  
is only three numbers away. Dial 9-1-1 or other local emergency  
number in the case of fire, traffic accident, road hazard or medical  
emergency. Remember, it is a free call on your wireless phone!  
9. Use your wireless phone to help others in emergencies. Your  
wireless phone provides you a perfect opportunity to be a Good  
Samaritan in your community. If you see an auto accident, crime  
in progress or other serious emergency where lives are in danger,  
call 9-1-1 or other local emergency number, as you would want  
others to do for you.  
10. Call roadside assistance or a special wireless non emergency  
assistance number when necessary. Certain situations you  
encounter while driving may require attention, but are not urgent  
enough to merit a call for emergency services. But you still can  
Health and Safety Information  
124  
Download from Www.Somanuals.com. All Manuals Search And Download.  
use your wireless phone to lend a hand. If you see a broken-down  
vehicle posing no serious hazard, a broken traffic signal, a minor  
traffic accident where no one appears injured or a vehicle you  
know to be stolen, call roadside assistance or other special non-  
emergency wireless number.  
Careless, distracted individuals and people driving irresponsibly  
represent a hazard to everyone on the road. Since 1984, the Cellular  
Telecommunications Industry Association and the wireless industry  
have conducted an educational outreach program to inform wireless  
phone users of their responsibilities as safe drivers and good  
citizens. As we approach a new century, more and more of us will  
take advantage of the benefits of wireless telephones. And, as we  
take to the roads, we all have a responsibility to drive safely.  
The wireless industry reminds you to use your phone safely when  
driving.  
Cellular Telecommunications & Internet Association For more  
information, please call 1-888-901-SAFE.  
For updates: http://www.ctia.org  
Appendix C: Consumer Update on Wireless  
Phones  
U.S. Food and Drug Administration  
1. What kinds of phones are the subject of this update?  
The term wireless phone refers here to hand-held wireless phones  
with built-in antennas, often called cell, mobile, or PCS phones.  
These types of wireless phones can expose the user to measurable  
radio frequency energy (RF) because of the short distance between  
the phone and the user s head. These RF exposures are limited by  
Federal Communications Commission safety guidelines that were  
developed with the advice of FDA and other federal health and safety  
agencies. When the phone is located at greater distances from the  
user, the exposure to RF is drastically lower because a person’s RF  
Health and Safety Information  
125  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
exposure decreases rapidly with increasing distance from the source.  
The so-called “cordless phones,” which have a base unit connected  
to the telephone wiring in a house, typically operate at far lower  
power levels, and thus produce RF exposures well within the FCC’s  
compliance limits.  
2. Do wireless phones pose a health hazard?  
The available scientific evidence does not show that any health  
problems are associated with using wireless phones. There is no  
proof, however, that wireless phones are absolutely safe. Wireless  
phones emit low levels of radio frequency energy (RF) in the  
microwave range while being used. They also emit very low levels of  
RF when in the stand-by mode. Whereas high levels of RF can  
produce health effects (by heating tissue), exposure to low level RF  
that does not produce heating effects causes no known adverse  
health effects. Many studies of low level RF exposures have not  
found any biological effects. Some studies have suggested that some  
biological effects may occur, but such findings have not been  
confirmed by additional research. In some cases, other researchers  
have had difficulty in reproducing those studies, or in determining  
the reasons for inconsistent results.  
3. What is FDA’s role concerning the safety of wireless phones?  
Under the law, FDA does not review the safety of radiation emitting  
consumer products such as wireless phones before they can be sold,  
as it does with new drugs or medical devices. However, the agency  
has authority to take action if wireless phones are shown to emit  
radio frequency energy (RF) at a level that is hazardous to the user. In  
such a case, FDA could require the manufacturers of wireless phones  
to notify users of the health hazard and to repair, replace or recall the  
phones so that the hazard no longer exists.  
Health and Safety Information  
126  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Although the existing scientific data do not justify FDA regulatory  
actions, FDA has urged the wireless phone industry to take a number  
of steps, including the following:  
Support needed research into possible biological effects of RF of  
the type emitted by wireless phones;  
Design wireless phones in a way that minimizes any RF exposure  
to the user that is not necessary for device function; and  
Cooperate in providing users of wireless phones with the best  
possible information on possible effects of wireless phone use on  
human health  
FDA belongs to an interagency working group of the federal agencies  
that have responsibility for different aspects of RF safety to ensure  
coordinated efforts at the federal level. The following agencies belong  
to this working group:  
National Institute for Occupational Safety and Health  
Environmental Protection Agency Federal Communications  
Commission  
Occupational Safety and Health Administration  
National Telecommunications and Information Administration  
The National Institutes of Health participates in some interagency  
working group activities, as well.  
FDA shares regulatory responsibilities for wireless phones with the  
Federal Communications Commission (FCC). All phones that are sold  
in the United States must comply with FCC safety guidelines that limit  
RF exposure. FCC relies on FDA and other health agencies for safety  
questions about wireless phones.  
FCC also regulates the base stations that the wireless phone  
networks rely upon. While these base stations operate at higher  
power than do the wireless phones themselves, the RF exposures  
that people get from these base stations are typically thousands of  
times lower than those they can get from wireless phones. Base  
stations are thus not the primary subject of the safety questions  
discussed in this document.  
Health and Safety Information  
127  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4. What is FDA doing to find out more about the possible health  
effects of wireless phone RF?  
FDA is working with the U.S. National Toxicology Program and with  
groups of investigators around the world to ensure that high priority  
animal studies are conducted to address important questions about  
the effects of exposure to radio frequency energy (RF).  
FDA has been a leading participant in the World Health Organization  
International Electromagnetic Fields (EMF) Project since its inception  
in 1996. An influential result of this work has been the development  
of a detailed agenda of research needs that has driven the  
establishment of new research programs around the world. The  
Project has also helped develop a series of public information  
documents on EMF issues.  
FDA and the Cellular Telecommunications & Internet Association  
(CTIA) have a formal Cooperative Research and Development  
Agreement (CRADA) to do research on wireless phone safety. FDA  
provides the scientific oversight, obtaining input from experts in  
government, industry, and academic organizations. CTIA-funded  
research is conducted through contracts to independent  
investigators. The initial research will include both laboratory studies  
and studies of wireless phone users. The CRADA will also include a  
broad assessment of additional research needs in the context of the  
latest research developments around the world.  
5. What steps can I take to reduce my exposure to radio frequency  
energy from my wireless phone?  
If there is a risk from these products—and at this point we do not  
know that there is—it is probably very small. But if you are  
concerned about avoiding even potential risks, you can take a few  
simple steps to minimize your exposure to radio frequency energy  
(RF). Since time is a key factor in how much exposure a person  
receives, reducing the amount of time spent using a wireless phone  
will reduce RF exposure.  
Health and Safety Information  
128  
Download from Www.Somanuals.com. All Manuals Search And Download.  
If you must conduct extended conversations by wireless phone every  
day, you could place more distance between your body and the  
source of the RF, since the exposure level drops off dramatically with  
distance. For example, you could use a headset and carry the  
wireless phone away from your body or use a wireless phone  
connected to a remote antenna  
Again, the scientific data do not demonstrate that wireless phones  
are harmful. But if you are concerned about the RF exposure from  
these products, you can use measures like those described above to  
reduce your RF exposure from wireless phone use.  
6. What about children using wireless phones?  
The scientific evidence does not show a danger to users of wireless  
phones, including children and teenagers. If you want to take steps to  
lower exposure to radio frequency energy (RF), the measures  
described above would apply to children and teenagers using  
wireless phones. Reducing the time of wireless phone use and  
increasing the distance between the user and the RF source will  
reduce RF exposure.  
Some groups sponsored by other national governments have advised  
that children be discouraged from using wireless phones at all. For  
example, the government in the United Kingdom distributed leaflets  
containing such a recommendation in December 2000. They noted  
that no evidence exists that using a wireless phone causes brain  
tumors or other ill effects. Their recommendation to limit wireless  
phone use by children was strictly precautionary; it was not based on  
scientific evidence that any health hazard exists.  
7. Do hands-free kits for wireless phones reduce risks from  
exposure to RF emissions?  
Since there are no known risks from exposure to RF emissions from  
wireless phones, there is no reason to believe that hands-free kits  
reduce risks. Hands-free kits can be used with wireless phones for  
Health and Safety Information  
129  
Download from Www.Somanuals.com. All Manuals Search And Download.  
convenience and comfort. These systems reduce the absorption of  
RF energy in the head because the phone, which is the source of the  
RF emissions, will not be placed against the head. On the other hand,  
if the phone is mounted against the waist or other part of the body  
during use, then that part of the body will absorb more RF energy.  
Wireless phones marketed in the U.S. are required to meet safety  
requirements regardless of whether they are used against the head or  
against the body. Either configuration should result in compliance  
with the safety limit.  
8. Do wireless phone accessories that claim to shield the head from  
RF radiation work?  
Since there are no known risks from exposure to RF emissions from  
wireless phones, there is no reason to believe that accessories that  
claim to shield the head from those emissions reduce risks. Some  
products that claim to shield the user from RF absorption use special  
phone cases, while others involve nothing more than a metallic  
accessory attached to the phone. Studies have shown that these  
products generally do not work as advertised. Unlike “hand-free”  
kits, these so-called “shields” may interfere with proper operation of  
the phone. The phone may be forced to boost its power to  
compensate, leading to an increase in RF absorption. In February  
2002, the Federal trade Commission (FTC) charged two companies  
that sold devices that claimed to protect wireless phone users from  
radiation with making false and unsubstantiated claims. According to  
FTC, these defendants lacked a reasonable basis to substantiate their  
claim.  
9. What about wireless phone interference with medical equipment?  
Radio frequency energy (RF) from wireless phones can interact with  
some electronic devices. For this reason, FDA helped develop a  
detailed test method to measure electromagnetic interference (EMI)  
of implanted cardiac pacemakers and defibrillators from wireless  
Health and Safety Information  
130  
Download from Www.Somanuals.com. All Manuals Search And Download.  
telephones. This test method is now part of a standard sponsored by  
the Association for the Advancement of Medical instrumentation  
(AAMI). The final draft, a joint effort by FDA, medical device  
manufacturers, and many other groups, was completed in late 2000.  
This standard will allow manufacturers to ensure that cardiac  
pacemakers and defibrillators are safe from wireless phone EMI.  
FDA has tested hearing aids for interference from handheld wireless  
phones and helped develop a voluntary standard sponsored by the  
Institute of Electrical and Electronic Engineers (IEEE). This standard  
specifies test methods and performance requirements for hearing  
aids and wireless phones so that no interference occurs when a  
person uses a compatible phone and a compatible hearing aid at the  
same time. This standard was approved by the IEEE in 2000.  
FDA continues to monitor the use of wireless phones for possible  
interactions with other medical devices. Should harmful interference  
be found to occur, FDA will conduct testing to assess the interference  
and work to resolve the problem.  
10. What are the results of the research done already?  
The research done thus far has produced conflicting results, and  
many studies have suffered from flaws in their research methods.  
Animal experiments investigating the effects of radio frequency  
energy (RF) exposures characteristic of wireless phones have yielded  
conflicting results that often cannot be repeated in other laboratories.  
A few animal studies, however, have suggested that low levels of RF  
could accelerate the development of cancer in laboratory animals.  
However, many of the studies that showed increased tumor  
development used animals that had been genetically engineered or  
treated with cancer causing chemicals so as to be pre-disposed to  
develop cancer in the absence of RF exposure. Other studies exposed  
the animals to RF for up to 22 hours per day. These conditions are  
not similar to the conditions under which people use wireless  
Health and Safety Information  
131  
Download from Www.Somanuals.com. All Manuals Search And Download.  
phones, so we don’ t know with certainty what the results of such  
studies mean for human health.  
Three large epidemiology studies have been published since  
December 2000. Between them, the studies investigated any possible  
association between the use of wireless phones and primary brain  
cancer, gioma, meningioma, or acoustic neuroma, tumors of the  
brain or salivary gland, leukemia, or other cancers. None of the  
studies demonstrated the existence of any harmful health effects  
from wireless phone RF exposures. However, none of the studies can  
answer questions about long-term exposures, since the average  
period of phone use in these studies was around three years.  
11. What research is needed to decide whether RF exposure from  
wireless phones poses a health risk?  
A combination of laboratory studies and epidemiological studies of  
people actually using wireless phones would provide some of the  
data that are needed. Lifetime animal exposure studies could be  
completed in a few years. However, very large numbers of animals  
would be needed to provide reliable proof of a cancer promoting  
effect if one exists. Epidemiological studies can provide data that is  
directly applicable to human populations, but 10 or more years  
follow-up may be needed to provide answers about some health  
effects, such as cancer. This is because the interval between the time  
of exposure to a cancer-causing agent and the time tumors develop -  
if they do - may be many, many years. The interpretation of  
epidemiological studies is hampered by difficulties in measuring  
actual RF exposure during day-to-day use of wireless phones. Many  
factors affect this measurement, such as the angle at which the  
phone is held, or which model of phone is used.  
12. Which other federal agencies have responsibilities related to  
potential RF health effects?  
Health and Safety Information  
132  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Additional information on the safety of RF exposures from various  
sources can be obtained from the following organizations.  
FCC RF Safety Program:  
http://www.fcc.gov/oet/rfsafety/  
Environmental Protection Agency (EPA):  
http://www.epa.gov/radiation/  
Occupational Safety and Health Administration’s (OSHA):  
http://www.osha-slc.gov/SLTC/radiofrequencyradiation/index.html  
National Institute for Occupational Safety and Health (NIOSH):  
http://www.cdc.gov/niosh/topics.emf  
World health Organization (WHO):  
http://www.who.int/peh-emf/en  
International Commission on Non-Ionizing Radiation Protection:  
http://www.icnirp.de  
National Radiation Protection Board (UK):  
http://www.hpa.org.uk/radiation  
US Food and Drug Administration  
http://www.fda.gov/cellphones  
Health and Safety Information  
133  
Download from Www.Somanuals.com. All Manuals Search And Download.  
STANDARD LIMITED WARRANTY  
What is Covered and For How Long? SAMSUNG ELECTRONICS  
CANADA INC. (SAMSUNG) warrants to the original purchaser  
("Purchaser") that SAMSUNG’s Phones and accessories ("Products")  
are free from defects in material and workmanship under normal use  
and service for the period commencing upon the date of purchase  
and continuing for the following specified period of time after that  
date:  
Phone  
1 Year  
Batteries  
1 Year  
Leather Case/Pouch  
Holster  
90 Days  
90 Days  
1 Year  
Other Phone Accessories  
What is Not Covered? This Limited Warranty is conditioned upon  
proper use of Product by Purchaser. This Limited Warranty does not  
cover: (a) defects or damage resulting from accident, misuse, abuse,  
neglect, unusual physical, electrical or electromechanical stress, or  
modification of any part of Product, including antenna, or cosmetic  
damage; (b) equipment that has the serial number removed or made  
illegible; (c) any plastic surfaces or other externally exposed parts  
that are scratched or damaged due to normal use; (d) malfunctions  
resulting from the use of Product in conjunction with accessories,  
products, or ancillary/peripheral equipment not furnished or  
approved by SAMSUNG; (e) defects or damage from improper  
testing, operation, maintenance, installation, or adjustment; (f)  
installation, maintenance, and service of Product, or (g) Product  
used or purchased outside the United States or Canada.  
STANDARD LIMITED WARRANTY  
134  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
This Limited Warranty covers batteries only if battery capacity falls  
below 80% of rated capacity or the battery leaks, and this Limited  
Warranty does not cover any battery if (i) the battery has been  
charged by a battery charger not specified or approved by SAMSUNG  
for charging the battery, (ii) any of the seals on the battery are broken  
or show evidence of tampering, or (iii) the battery has been used in  
equipment other than the SAMSUNG phone for which it is specified.  
What are SAMSUNG’s Obligations? During the applicable warranty  
period, SAMSUNG will repair or replace, at SAMSUNG’s sole option,  
without charge to Purchaser, any defective component part of  
Product. To obtain service under this Limited Warranty, Purchaser  
must return Product to an authorized phone service facility in an  
adequate container for shipping, accompanied by Purchaser’s sales  
receipt or comparable substitute proof of sale showing the date of  
purchase, the serial number of Product and the sellers’ name and  
address. To obtain assistance on where to deliver the Product, call  
Samsung Customer Care at 1-800-SAMSUNG. Upon receipt,  
SAMSUNG will promptly repair or replace the defective Product.  
SAMSUNG may, at SAMSUNG’s sole option, use rebuilt,  
reconditioned, or new parts or components when repairing any  
Product or replace Product with a rebuilt, reconditioned or new  
Product. Repaired/replaced leather cases, pouches and holsters will  
be warranted for a period of ninety (90) days. All other repaired/  
replaced Product will be warranted for a period equal to the  
remainder of the original Limited Warranty on the original Product or  
for 90 days, whichever is longer. All replaced parts, components,  
boards and equipment shall become the property of SAMSUNG. If  
SAMSUNG determines that any Product is not covered by this  
Limited Warranty, Purchaser must pay all parts, shipping, and labor  
charges for the repair or return of such Product.  
What Are the Limits On SAMSUNG’s Liability? EXCEPT AS SET  
FORTH IN THE EXPRESS WARRANTY CONTAINED HEREIN,  
PURCHASER TAKES THE PRODUCT “AS IS,” AND SAMSUNG  
STANDARD LIMITED WARRANTY  
135  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MAKES NO WARRANTY OR REPRESENTATION AND THERE ARE NO  
CONDITIONS, EXPRESS OR IMPLIED, STATUTORY OR OTHERWISE,  
OF ANY KIND WHATSOEVER WITH RESPECT TO THE PRODUCT,  
INCLUDING BUT NOT LIMITED TO:  
THE MERCHANTABILITY OF THE PRODUCT OR ITS FITNESS FOR  
ANY PARTICULAR PURPOSE OR USE;  
WARRANTIES OF TITLE OR NON-INFRINGEMENT;  
DESIGN, CONDITION, QUALITY, OR PERFORMANCE OF THE  
PRODUCT;  
THE WORKMANSHIP OF THE PRODUCT OR THE COMPONENTS  
CONTAINED THEREIN; OR  
COMPLIANCE OF THE PRODUCT WITH THE REQUIREMENTS OF  
ANY LAW, RULE, SPECIFICATION OR CONTRACT PERTAINING  
THERETO.  
NOTHING CONTAINED IN THE INSTRUCTION MANUAL SHALL BE  
CONSTRUED TO CREATE AN EXPRESS WARRANTY OF ANY KIND  
WHATSOEVER WITH RESPECT TO THE PRODUCT. ALL IMPLIED  
WARRANTIES AND CONDITIONS THAT MAY ARISE BY OPERATION  
OF LAW, INCLUDING IF APPLICABLE THE IMPLIED WARRANTIES  
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR  
PURPOSE, ARE HEREBY LIMITED TO THE SAME DURATION OF  
TIME AS THE EXPRESS WRITTEN WARRANTY STATED HEREIN.  
SOME STATES/PROVINCES DO NOT ALLOW LIMITATIONS ON HOW  
LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION  
MAY NOT APPLY TO YOU. IN ADDITION, SAMSUNG SHALL NOT BE  
LIABLE FOR ANY DAMAGES OF ANY KIND RESULTING FROM THE  
PURCHASE, USE, OR MISUSE OF, OR INABILITY TO USE THE  
PRODUCT OR ARISING DIRECTLY OR INDIRECTLY FROM THE USE  
OR LOSS OF USE OF THE PRODUCT OR FROM THE BREACH OF  
THE EXPRESS WARRANTY, INCLUDING INCIDENTAL, SPECIAL,  
CONSEQUENTIAL OR SIMILAR DAMAGES, OR LOSS OF  
ANTICIPATED PROFITS OR BENEFITS, OR FOR DAMAGES ARISING  
FROM ANY TORT (INCLUDING NEGLIGENCE OR GROSS  
NEGLIGENCE) OR FAULT COMMITTED BY SAMSUNG, ITS AGENTS  
STANDARD LIMITED WARRANTY  
136  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OR EMPLOYEES, OR FOR ANY BREACH OF CONTRACT OR FOR ANY  
CLAIM BROUGHT AGAINST PURCHASER BY ANY OTHER PARTY.  
SOME STATES/PROVINCES DO NOT ALLOW THE EXCLUSION OR  
LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO  
THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU.  
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU  
MAY ALSO HAVE OTHER RIGHTS, WHICH VARY FROM STATE TO  
STATE/PROVINCE TO PROVINCE. THIS LIMITED WARRANTY SHALL  
NOT EXTEND TO ANYONE OTHER THAN THE ORIGINAL  
PURCHASER OF THIS PRODUCT AND STATES PURCHASER’S  
EXCLUSIVE REMEDY. IF ANY PORTION OF THIS LIMITED  
WARRANTY IS HELD ILLEGAL OR UNENFORCEABLE BY REASON OF  
ANY LAW, SUCH PARTIAL ILLEGALITY OR UNENFORCEABILITY  
SHALL NOT AFFECT THE ENFORCEABILITY FOR THE REMAINDER  
OF THIS LIMITED WARRANTY WHICH PURCHASER  
ACKNOWLEDGES IS AND WILL ALWAYS BE CONSTRUED TO BE  
LIMITED BY ITS TERMS OR AS LIMITED AS THE LAW PERMITS.  
THE PARTIES UNDERSTAND THAT THE PURCHASER MAY USE  
THIRD-PARTY SOFTWARE OR EQUIPMENT IN CONJUNCTION WITH  
THE PRODUCT. SAMSUNG MAKES NO WARRANTIES OR  
REPRESENTATIONS AND THERE ARE NO CONDITIONS, EXPRESS  
OR IMPLIED, STATUTORY OR OTHERWISE, AS TO THE QUALITY,  
CAPABILITIES, OPERATIONS, PERFORMANCE OR SUITABILITY OF  
ANY THIRD-PARTY SOFTWARE OR EQUIPMENT, WHETHER SUCH  
THIRD-PARTY SOFTWARE OR EQUIPMENT IS INCLUDED WITH THE  
PRODUCT DISTRIBUTED BY SAMSUNG OR OTHERWISE,  
INCLUDING THE ABILITY TO INTEGRATE ANY SUCH SOFTWARE OR  
EQUIPMENT WITH THE PRODUCT. THE QUALITY, CAPABILITIES,  
OPERATIONS, PERFORMANCE AND SUITABILITY OF ANY SUCH  
THIRD-PARTY SOFTWARE OR EQUIPMENT LIE SOLELY WITH THE  
PURCHASER AND THE DIRECT VENDOR, OWNER OR SUPPLIER OF  
SUCH THIRD-PARTY SOFTWARE OR EQUIPMENT, AS THE CASE  
MAY BE.  
STANDARD LIMITED WARRANTY  
137  
Download from Www.Somanuals.com. All Manuals Search And Download.  
This Limited Warranty allocates risk of Product failure between  
Purchaser and SAMSUNG, and SAMSUNG’s Product pricing reflects  
this allocation of risk and the limitations of liability contained in this  
Limited Warranty. The agents, employees, distributors, and dealers  
of SAMSUNG are not authorized to make modifications to this  
Limited Warranty, or make additional warranties binding on  
SAMSUNG. Accordingly, additional statements such as dealer  
advertising or presentation, whether oral or written, do not constitute  
warranties by SAMSUNG and should not be relied upon.  
Samsung Electronics Canada, Inc.  
©2006 Samsung Electronics Canada, Inc.. SAMSUNG is a registered  
trademark of Samsung Electronics Co., Ltd. and its related entities.  
No reproduction in whole or in part allowed without prior written  
approval.  
Specifications and availability subject to change without notice.  
STANDARD LIMITED WARRANTY  
138  
Download from Www.Somanuals.com. All Manuals Search And Download.  
142  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Radio Shack Car Stereo System PLD35MU User Guide
RCA Satellite TV System DRD403RA User Guide
RTS Network Card TIF 2000A User Guide
Saitek Speaker A 250 User Guide
Samsung Digital Camera DIGITAL CAMERAS User Guide
SanDisk Network Card Type I II PCI e Interface Cards User Guide
Sanus Systems Network Cables ELM420 User Guide
Sanyo Battery Charger UPF383456L User Guide
Scag Power Equipment Lawn Mower STT 35BVAC SS User Guide
Seagate Computer Drive CFS270A User Guide