Samsung Security Camera Samsung SmartCam WiFi Home Security Camera User Guide |
General setting
3) Check to agree to the terms and conditions,
and then tap <Next>.
2-4. VIEWING LIVE VIDEO
5) Create the <Camera password> and
<Camera Name>, and then tap <Add>.
1.
CONNECTING THE CAMERA TO YOUR ROUTER
1) Tap <General setting>.
1) Tap on the camera icon [ ] to view live
ꢀ Create camera password using alphanumeric
characters between 1 to 8 without any space.
Example : q1
video.
4) Enter the required information and Tap
SNH-1010N English
Quick Start
Guide
1) Connect the power adapter to the camera.
2) Configure the basic camera settings.
Tap on the arrow icon [ ] for camera
options.
<Register>.
• Camera Name : Camera name is used to easily
identify the camera when you have more than one.
i.e., Living room, Kitchen, Bedroom.
• ID : Create user ID using letters, numbers and
periods between 8-14 characters.
6) Tap <Go To Camera List>.
2) Connect the network cable to
the camera and your network
router.
• PW : Create password using letters and numbers
except colons and commas between 8-14
characters.
ꢀ If there is a camera to register additionally, tap
• Event Alarm : Specify whether to trigger the alarm
or not, and specify the sensitivity.
The higher the sensitivity is, the subtler motion/
audio events will be detected.
<Register new camera>.
2) Enter the <Camera password> for the
camera selected. This is the same camera
password you created at the time you
registered the camera.
Thank you for purchasing the Samsung
SmartCam WiFi Home Security Camera.
Follow the simple steps in this guide
to set up and start using your new
SmartCam.
• Confirm Password : Checks whether your password is entered correctly.
• Name : Enter your name.
ꢀ Connect one end of the enclosed network cable to your camera and the
other to an open port on your router. Once setup is compete, you will no
longer need the network cable and the camera will connect to your WiFi
network.
2-3. CONNECTING CAMERA TO WI-FI NETWORK
• Night Vision : Set the IR lighting.
Check <Night Vision> to set the camera to switch to the night vision
mode automatically.
• E-mail : Email address is used to recover your account password.
Check the <SAVE> option to save the
camera password. Within 20 seconds, it will
start streaming.
1) From the camera list, tap on the [ ] for
cameraoptions.
• Audio : Adjust the volume of the built-in microphone and speaker of the
camera as appropriate.
If you have any questions or need help
installing your new product please contact
our free technical support.
3) The camera bootup will take about 1
minute then the camera status LED
will change from red to white.
2-2. ADDING YOUR CAMERA
2) Tap on <Setup> icon.
ꢀ
Video loading time will vary depending on your
internet connection.
3) Configure the notification.
1) Log-in.
Telephone : 1-877-349-3149
3) Enter the camera password you created for
J If your WiFi router supports WPS feature, refer to the user manual to connect
• Push Notification : Check to receive push notification
to your phone.
9am - 9pm EST, Monday - Friday
this camera and Tap <OK>.
via WPS button.
Related manual can be downloaded from
The SmartCam webpage and mobile menu may be subject to change
without prior notice.
2) Tap <Add Camera>.
• YouTube : Tap [ ] to enter your YouTube account
information to upload 30 video clips to your YouTube
account when event is detected.
4) Tap the <Network setting>.
3) Select the camera found and tap <next>.
PHONE
2-1. SETTING UP YOUR ACCOUNT FROM MOBILE
ꢀ When your smartphone is connected to the same
5) Turn WiFi on.
XXXXXXXXXXXXXXX
• Picasa : Tap [ ] to enter your Picasa account
information to upload a picture to your Picasa
account when event is detected.
WiFi network as the camera, it will automatically
search for the camera.
ꢀ Download the Samsung Smartcam App on to your
UNPACKING
2-5. CAMERA SETUP
Android phone or your iPhone.
6) Select your WiFi network and enter your WiFi
network password.
Make sure all following items are in the packaging:
ꢀ Search keywords for the application: “Samsung
SmartCam”, “Smartcam”, “SAMSUNG TECHWIN”,
“TECHWIN”.
Tap the <Setup> icon to
configure a camera to be
monitored.
4) Tap <Apply>.
• Other WiFi Networks : Enter the SSID name and
password to connect to the network.
Time setting
1) Run the downloaded application.
7) Tap <OK> and unplug the network cable from the camera and
the router.
1) Tap <Time setting>.
2) Tap <Sign up here>.
Double Sided
Tape
Warranty Card /
GPL License
Camera
Adapter
Network Cable
Bracket
Quick Guide X3
ꢀ The WiFi status LED will become steady white once the camera is
connected to the Wireless Access Point. (may take up to 30sec).
You can now unplug and place the camera anywhere within your wireless
network range. If the camera LED did not turn solid white, please contact
our tech support at 1-877-349-3149.
4) If the camera is not
detected, please enter
the camera serial
2) Set the camera’s clock.
J Please keep the packaging
• Time Zone : Select your region.
number manually.
You will need the serial number that on the side of the
packaging to register the camera.
• Summer Time : Check this option if you live in a
country or region where DST(Daylight Saving Time)
is applied.
ꢀ Tap on [ ] for more
information.
8) Tap <Back> and select <Live> to see the video.
PT01-001489A
Download from Www.Somanuals.com. All Manuals Search And Download.
|