Real-timme Network
Dynamic 30X
Pan & Tilt
30X PTZ Network Camera SNP-3300A User’s Manual
Thank you for purchasing a SAMSUNG iPOLiS Network Camera.
e this product,
Before attempting to connect or operat
or future use.
please read these instructions carefully and save this manual f
Download from Www.Somanuals.com. All Manuals Search And Download.
ENGLISH
Preface
A brand that is integrated into Samsung's network products,
stands for convenient world (Polis) made safe
(Police) through Samsung's superior network performance(Internet
protocol). With products' clear digital images
a
transmitted over the internet, real-time monitoring is possible
anywhere with an internet connection. Easy remote control
functions and the use of existing networks minimize installation
costs. With
,
experience
a
world of convenience
connected anytime, anywhere.
Preface
Thanks for purchasing of 30X PTZ Network Camera SNP-3300A.
This is a user instruction manual for a 30X PTZ Network Camera
SNP-3300A that employs Samsung Techwin’s SVⅢ DSP system
with superior low light capability.
The user who installs and operates the product shall be aware of this
manual and other manuals referenced by this manual before the
installation and operation and use properly.
This manual and the software and hardware explained here are
protected by copyright law.
So the copy, reprint and translation to other languages of a part of or
all contents of this user manual without permission of
SamsungTechwin Co., LTD are not allowed except for the copy for
general use within the scope of copyright law.
i
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Contents
Preface..............................................................................i
Contents ...........................................................................1
Note to User .....................................................................5
Product Warranty and Limitations ....................................8
Warning Symbols .............................................................9
Danger..............................................................................9
Caution........................................................................... 11
Ch1. Overview .......................................................................13
1.1. 30X PTZ Network Camera SNP-3300A Introduction.......14
1.2. Features ..................................................................14
Ch2. Section names and functions .....................................17
2.1. Body ........................................................................18
2.2. Camera Holder........................................................19
2.3. Camera Holder connection......................................20
Ch3. Installation and Network Setup...................................23
3.1. Connecting to Monitor (For installation) ..................24
3.2. Connecting to Power...............................................26
3.3. Installation of SNP-3300A .......................................27
3.4. Network configuration and connection method using Web page 35
Ch4. How to Use Web Viewer...............................................41
4.1. How to Use Web Viewer..........................................42
1
Download from Www.Somanuals.com. All Manuals Search And Download.
30X PTZ Network Camera SNP-3300A
4.1.1. Login......................................................................42
4.1.2. Web Viewer screen ................................................43
4.1.3. Area Zoom guide....................................................49
4.2. Using Administration page.......................................53
4.2.1. Initialization Screen after Connecting .....................53
4.2.2. Live ........................................................................54
4.2.3. Basic......................................................................55
4.2.4. Network..................................................................57
4.2.5. User .......................................................................58
4.2.6. Pan/Tilt/Zoom.........................................................61
4.2.7. Motion Detection ....................................................63
4.2.8. Alarm/Sensor .........................................................64
4.2.9. Time.......................................................................67
4.2.10. LOG .....................................................................68
4.2.11. Upgrade ...............................................................69
4.2.12. System Reboot.....................................................70
Ch5. How to Operate Camera...............................................71
5.1. OSD Menu Oganization ..........................................72
5.2. Camera Setting .......................................................76
5.2.1. White Balance........................................................76
5.2.2. Exposure................................................................77
5.2.3. Back Light ..............................................................79
5.2.4. AGC .......................................................................80
5.2.5. SSNR (Samsung Super Noise Reduction) .............81
5.2.6. Day & Night............................................................81
5.2.7. Others....................................................................83
5.3. Sequence Setting....................................................84
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
5.3.1 Preset .....................................................................84
5.3.2. Swing SEQ.............................................................86
5.3.3. Group SEQ ............................................................87
5.3.4. Tour........................................................................87
5.3.5. PTZ Trace ..............................................................88
5.3.6. Auto Run ................................................................88
5.3.7. Power On Resume.................................................89
5.4. P/T Setting...............................................................90
5.4.1. Pan Limit................................................................90
5.4.2. Tilt Limit..................................................................90
5.4.3. Area Setting ...........................................................91
5.4.4. Area Masking .........................................................92
5.4.5. Prop. P/T................................................................92
5.4.6. Digital Flip ..............................................................93
5.4.7. Image Hold.............................................................93
5.5. OSD Setting ............................................................94
5.5.1. Camera Name........................................................94
5.5.2. Preset Number.......................................................95
5.5.3. Preset Name..........................................................95
5.5.4. Sequence Status....................................................96
5.5.5. Area Name.............................................................96
5.5.6. PTZ Position ..........................................................97
5.5.7. Language...............................................................97
5.6. Initialization Setting .................................................98
5.7. Status.......................................................................99
Ch6. Troubleshooting .........................................................101
3
Download from Www.Somanuals.com. All Manuals Search And Download.
30X PTZ Network Camera SNP-3300A
Appendix A. DDNS Usage.................................................. 107
Specifications ............................................................... 115
Dimension .................................................................... 118
If you refer to the enclosed Quick guide and the
Note
Manual in the CD, you can learn how to use Network
Manager.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Note to User
Note to User
This machine’s electromagnetic waves have been registered as
suitable for business purposes; the retailer and consumer should be
aware of this registration. If in the case of wrongful purchases,
please exchange the product for a home use product.
Correct Disposal of This Product
(Waste Electrical & Electronic Equipment)
(Applicable in the European Union and other
European countries with separate collection
systems)
This marking shown on the product or its literature, indicates that it
should not be disposed with other household wastes at the end of its
working life. To prevent possible harm to the environment or human
health from uncontrolled waste disposal, please separate this from
other types of wastes and recycle it responsibly to promote the
sustainable reuse of material resources. Household users should
contact either the retailer where they purchased this product, or their
local government office, for details of where and how they can take
this item for environmentally safe recycling. Business users should
contact their supplier and check the terms and conditions of the
purchase contract. This product should not be mixed with other
commercial wastes for disposal.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
30X PTZ Network Camera SNP-3300A
Samsung Techwin cares for the environment at all
product manufacturing stages to preserve the
environment, and is taking a number of steps to
provide customers with more environment-friendly
products.The Eco mark represents Samsung
Techwin s will to create environment-friendly
products, and indicates that the product satisfies
the EU RoHS Directive.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Note to User
Correct disposal of batteries in this product
(Applicable in the European Union and other
European countries with separate battery return
systems.)
This marking on the battery, manual or packaging indicates that the
batteries in this product should not be disposed of with other
household waste at the end of their working life. Where marked, the
chemical symbols Hg, Cd or Pb indicate that the battery contains
mercury, cadmium or lead above the reference levels in EC Directive
2006/66. If batteries are not properly disposed of, these substances
can cause harm to human health or the environment.
To protect natural resources and to promote material reuse, please
separate batteries from other types of waste and recycle them through
your local, free battery return system
7
Download from Www.Somanuals.com. All Manuals Search And Download.
30X PTZ Network Camera SNP-3300A
Product Warranty and Limitations
The manufacturers of this product do not take any responsibility for
this product; therefore, the manufacturer does not authorize the
third-party, but allows that retailer is responsible.
The product warranty does not extend to cover accidents, negligence,
abuse, or wrongful use for the whole or any part of the product.
Additionally, the manufacturer does not provide warranty for any
additional parts or affiliations.
The warranty is for one year from the purchase date. During the
period, warranty does not extend to malfunction in these areas.
y Malfunction due to user’s negligence
y Dismantlement or replacement by the user
y Connection to alternate power source
y Malfunction due to natural disasters (fire, flood, tsunami, etc.)
y Replacement due to wear and tear
y Instability of network
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Warning Symbols
Warning Symbols
Before attempting to connect or operate this product,
please read these instructions carefully and save this manual for
future use.
Danger :
Misuse or wrongful operation of the product may
result in death, injury or bring about other fatal
results. It indicates absolute caution when operating.
Caution :
Misuse or wrongful operation of the product may
result in slight injury or damage to the product. It
indicates caution when operating.
Note :
Indication that the user needs to be aware of certain
matters, or will find matters helpful in operating the
product.
Danger
Before Setup
y Please set up the proper voltage before connecting to power
source.
y Please be sure the power is turned off before setup.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
30X PTZ Network Camera SNP-3300A
y There is risk of shock or fire; be sure to avoid setup in places
with high humidity.
y To prevent shocks, please connect the ground wire.
y Do not install the camera on a surface that can not support it.
y Unless the surface is suitable, it could cause falling or other
hazards.
During Use
y When opening the product cover, there is a risk of electric
shock. Only a professional should open the cover.
y Please use only in an environment with standard temperature
and humidity.
y Please do not plug in multiple products to a power source; it is
often the cause of fires.
y Please do not place water or heavy objects on the product; it is
often a cause of malfunction.
y Please do not use in a location with propane gas, gasoline or
other flammable substances to avoid risk of explosion or fire.
y Please do not touch the power plug with wet hands to avoid
electric shock.
y Do not pull on the power plug with too much force; a damaged
plug may cause electric shock or fires.
y Don’t connect the RJ-45 cable to a terminal by constraint.
y Stop using your camera when you find a malfunction.
If you use your camera around smoke or unusual heat for a
long time, Fire may be caused.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Caution
y Random replacement of built-in battery by other types of
batteries may cause explosion. The battery shall be replaced by
the same battery. The lithium battery incorporated in this
product is not user replaceable. Replacement of the lithium
battery will be done by a trained technician.
For information on its replacement, please contact your service
provider.
y The used batteries shall be disposed carefully because they can
cause environment pollutions.
Disassembly and Cleaning
y There is a risk of malfunction, shock or other dangers. Please
do not disassemble or attempt to fix the product.
y To prevent malfunction or shock, please do not use a wet cloth
or oil-based cleaning product to clean the product exterior.
Clean the exterior of the product with a dry cloth.
Caution
y Do not install under extreme temperature conditions
Use only under temperature conditions between -0°C and
+40°C. Provide good ventilation when using in high
temperature conditions.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
30X PTZ Network Camera SNP-3300A
y Do not install under unstable lighting conditions.
Severe lighting changes or flickering may hinder normal
camera operation.
y Do not drop the camera or subject it to physical shock.
May cause a product malfunction.
y Never keep the camera face to strong light directly.
May damage the CCD.
y Avoid touching the camera lens.
The lens is the most important component of the camera. Be
careful not to smear it with fingerprints.
y Do not expose the camera to rain or other types of liquids
Wipe dry any liquids. Liquids may contain minerals that are
corrosive to Electronic components.
y Do not expose the camera to radioactivity.
Radioactivity exposure may damage the CCD.
y Do not disassemble the camera.
If you disassemble the product as you please, a Repair Center
doesn’t repair it for free.
y Please check the created network place first, before trying to
connect to a network.
y Please use only the power adapter that is provided with the
product.
y Please check national laws to be sure that using the product for
monitoring purposes is not illegal.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Ch1. Overview
Download from Www.Somanuals.com. All Manuals Search And Download.
30X PTZ Network Camera SNP-3300A
1.1. 30X PTZ Network Camera SNP-3300A Introduction
The SNP-3300A is a high-tech network camera that uses MPEG-4
codec technology to allow high compression rates and clear picture
quality by allowing for high frame rates to be transmitted through
the network.
By using the network, remote connection, monitoring, and control is
possible from any location for simple use; additionally, set-up
requires only a network.
The 30X PTZ Network Camera SNP-3300A utilizes embedded
software solutions (Embedded Web Server, Embedded Streaming
Server, Network Protocol) developed by SamsungTechwin, and
guarantees performance and safety while offering various solutions
through Internet integration.
1.2. Features
€ 30X Zoom Lens with Auto-Focus Function
The 30X zoom lens having Auto-focus function magnifies
the image up to 240 times when used with the digital 8X
zoom function.
€ Variable Auto Surveillances
• Individual Preset Saving mode
11 camera adjustment function can be saved independently in
each Preset menu to provide optimum images.
• Image Hold
Images can be held while moving between Presets to reduce
14
Download from Www.Somanuals.com. All Manuals Search And Download.
1.2. Features
visual fatigue of observers.
• Various Protocols
Five different makers protocols are supported: Samsung
Techwin, Pelco, Samsung Electronics, Panasonic and Vicon.
• PTZ Tracking
4 patterns operated with the joystick can be saved and
replayed by users.
• Auto Swing
Pan or Tilt is operated in sequence between 2 designated
positions.
• Group Search
Maximum 128 Preset positions are toured in order.
• Tour Search
Maximum 6 Group Search functions are toured in order.
€ Smart P/T
Even when the Zoom-In function is On for the Pan and Tilt
speed correction function linked to the zoom position, fine
manual operation is possible.
€ Day & Night
Day & Night function of ICR(IR Cut-Filter Removal) and
Sens-Up function can achieve optimum images during
day and night.
*Sens-Up function improves the CCD sensitivity by
lengthening the exposure time using electricity.
*Day & Night function enables users to select and adjust
the color and black and white images according to the
light level.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
30X PTZ Network Camera SNP-3300A
128 Preset Position
A maximum of 128 Preset positions can be set up. This
function enables users to set up the monitoring place any
time..
€ Digital Flip
When you want to monitor the moving object below the
camera, you can execute the Digital Flip using the Web-
page or Viewer. The moving object can be monitored
without screen reverse.
€ Area Masking
For privacy protection, a maximum of 8 areas can be
masked among the surveillance areas preventing them to
be displayed on the screen.
€ High Data Compression ratio
With high data compression ratio based on MPEG-4,
transmission speed is fast and relatively large number of
frame can be transmitted on the same network bandwidth.
€ Area Zoom
This zooming function supports image expansion of
square area by mouse dragging.
Function execution is easy only with mouse operation.
Just one time clicking completes PTZ position adjustment
at Area Zoom mode.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Ch2. Section names and functions
Download from Www.Somanuals.com. All Manuals Search And Download.
30X PTZ Network Camera SNP-3300A
2.1. Body
① POWER Switch
Power ON/OFF. (Factory setting : OFF)
18
Download from Www.Somanuals.com. All Manuals Search And Download.
2.2. Camera Holder
2.2. Camera Holder
② RJ-45 ETHERNET Connection Input
③ AC 24V Input
④ AUDIO INPUT
⑤ AUDIO OUTPUT
⑥ Alarm Connection Input
1. IN1
5.IN4
2.IN2
3.GND
7.COM
11.2N.O
4.IN3
6.GND
10.COM2
8.1N.O
12.2N.C
9.1N.C
19
Download from Www.Somanuals.com. All Manuals Search And Download.
30X PTZ Network Camera SNP-3300A
2.3. Camera Holder connection
20
Download from Www.Somanuals.com. All Manuals Search And Download.
2.3. Camera Holder connection
Alarm Connection Terminal(Camera Holder)
NAME
IN1
Purpose
Alarm input sensor connection terminal1
Alarm input sensor connection terminal2
GND
UP3-#1
UP3-#2
UP3-#3
UP3-#4
UP3-#5
UP3-#6
UP3-#7
UP3-#8
UP3-#9
UP3-#10
UP3-#11
UP3-#12
IN2
GND
IN3
Alarm input sensor connection terminal3
Alarm input sensor connection terminal4
GND
IN4
GND
COM1
1N.O
1N.C
COM2
2N.O
2N.C
Alarm Output1 Common
Alarm Output1(for Normal Open)
Alarm Output1(for Normal Close)
Alarm Output1
Alarm Output2(for Normal Open)
Alarm Output2(for Normal Close)
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Ch3. Installation and Network Setup
Download from Www.Somanuals.com. All Manuals Search And Download.
30X PTZ Network Camera SNP-3300A
3.1. Connecting to Monitor (For installation)
Please connect the video output terminal located on the back of the
camera to the monitor.
30X PTZ Network Camera SNP-3300A
Monitor
y The connection method varies depending on the type of
monitor and accessories. Please refer to the user's manual for
each instrument.
y Please turn off the power when connecting.
y Please select Hi-Z on the 75Ω/Hi-Z switch for the intermediate
video TV set and select 75Ωfor the Intermediate device as
shown in the picture below.
30X PTZ Network Camera SNP-3300A Intermediate
End monitor
24
Download from Www.Somanuals.com. All Manuals Search And Download.
3.1. Connecting to Monitor (For installation)
ƒ
ƒ
This product is the network camera which
transmits video through network, video output
terminal is for installation and used to
determine imaging range when installing the
product.
Caution
It could have a trouble, like a falling-off in
video quality, if you use for monitoring.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
30X PTZ Network Camera SNP-3300A
3.2. Connecting to Power
AC24V 2.5A can be used for the input power of this product.
Connect the Power Adapter Cable. Use a driver (-) to screw one part
of the Power Adapter consisting of two lines to the holder.
Connect the Power Adapter’s plug to the Power Outlet.
Table 3-1. When the resistance value of copper wire is at [20℃(68℉)]
Copper wire size
(AWG)
#24
(0.22㎟)
#22
(0.33㎟)
#20
(0.52㎟)
#18
(0.83㎟)
Resistance value
(Ω/m)
0.078
0.028
0.050
0.018
0.030
0.011
0.018
0.06
Voltage drop(V/m)
y As shown in the Table3-1, voltage decreases as the wire gets
longer. Therefore use of an excessively long adaptor output
line for connection to the camera may affect the performance
of the camera.
※ Standard voltage for camera operation: DC 12V±10%, AC
24V±20%
※ There may be some deviation in voltage drop depending on the
26
Download from Www.Somanuals.com. All Manuals Search And Download.
3.3. Installation of SNP-3300A
3.3. Installation of SNP-3300A
„ Installation Precautions
y Check out the installation place. It should be strong enough to
support more than 4 times the total product weight including
30X PTZ Network Camera (SNP-3300A) and installation
structure.
y Install the camera in a place having more than 500mm of space
above the ceiling board.
y Install the camera holder using the provided installation guide
tab, screw and fastening cable.
y There is a risk of camera falling during installation. Prevent the
fall using the fastening cable while installing the camera. Also,
access of other people to the place should not be allowed
during installation.
„ Accessories Sold Separately
Use the following accessories sold separately for convenient
installation
ƒ
Ceiling Bracket(STB-330PC)
This mount is used to install the camera on the ceiling.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
30X PTZ Network Camera SNP-3300A
ƒ
Embedded Housing(STH-330PEV)
This housing is used to
attach the speed dome
camera to the ceiling for
installation.
ƒ
Indoor and Outdoor Housing(STH-330PIV, STH-320PO)
This housing is used to
attach the speed dome
camera to the ceiling for
installation.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
3.3. Installation of SNP-3300A
ƒ
Wall Bracket(STB-270PWV)
This item is used to install
the indoor or outdoor
housing for speed dome
on the wall.
ƒ
Pendant Bracket(STB-496PPV)
This item is used to install
the indoor and outdoor
housing for speed dome
on a concrete ceiling.
.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
30X PTZ Network Camera SNP-3300A
„ Camera Installation(Outdoor Housing)
1. Fasten the ceiling mount
on the ceiling.
2. Pull outside of the housing the safety wire fastened to the
outdoor housing.
3. Match the arrow sign
marked on the camera
holder to the arrow
marked inside the
housing and then
install the camera
holder in the housing.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
3.3. Installation of SNP-3300A
4. Match the arrow sign
marked on the camera
holder to the arrow
marked inside the
housing and then
install the camera
holder in the housing.
5. Connect the heater and
fan cables within the
housing to the fan
heater PCB.
6. Adjust and make the arrows marked on the bottom of the
camera body face each other.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
30X PTZ Network Camera SNP-3300A
7. Insert the camera into the
housing by matching the
installation pin on the
bottom of the camera and
the arrow inside the
housing, and then fasten
the camera by inserting
into the fastening hole,
turning the screw
clockwise for fastening.
8. Remove the camera dome cover and then the attach the housing
dome cover.
9. Connect the housing safety wires to the fixture inside the mount
installed on the ceiling.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
3.3. Installation of SNP-3300A
10. Connect the video cable, LAN cable and the power adapter
cable to the camera holder.
11. Check out the connection
of all parts and the camera
and install the completed
outdoor housing on the
ceiling mount.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
30X PTZ Network Camera SNP-3300A
ƒ
ƒ
Check out the input voltage of the power
adapter before connecting the power.
Caution
For an installation without housing, the camera
can be installed with installation template,
fastening the cable and screw provided
separately.
ƒ
ƒ
It is necessary to tighten the screw to prevent
unfastening.
If the screw to prevent unfastening is not tight,
the camera installed may fall due to vibration or
shock from the environment.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
3.4. Network configuration and connection method using Web page
3.4. Network configuration and connection method
using Web page
Use when there is one 30X PTZ Network Camera SNP-3300A to be
installed.
1. Please connect user’s PC to 30X PTZ Network Camera SNP-
3300A using cross cable.
To configure network, the internal IP must be
registered in the user’s PC.
Note
35
Download from Www.Somanuals.com. All Manuals Search And Download.
30X PTZ Network Camera SNP-3300A
ƒ
After
pressing
internet
protocol
(TCP/IP)
properties, press the ‘advanced’ button to go into
advanced configurations.
Add with 192.168.1.XXX.
2. Please launch a Web browser on user’s PC and enter
[192.168.1.100] in the URL address field and push <Enter>
button. Connect to Webviewer login window of 30X PTZ
Network Camera SNP-3300A.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
3.4. Network configuration and connection method using Web page
3. Please login with administrator’s authorization and move to
‘Setup-Network’ page.
Default value is ID : admin, PW : 11111111
Note
4. Please configure according to the network environment where
30X PTZ Network Camera SNP-3300A will be installed and
push <Save> button to save the configuration.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
30X PTZ Network Camera SNP-3300A
38
Download from Www.Somanuals.com. All Manuals Search And Download.
3.4. Network configuration and connection method using Web page
① LAN / xDSL/ DHCP Configuration
Item
LAN Use
Description
When network product is connected to normal
local LAN or when connected to static IP, the
network data to be allotted to the IP is configured.
When using xDSL dynamic IP, enter the ID and
PW.
xDSL
When automatically receiving IP through DHCP
server, the DHCP functions are activated.
‘DHCP’ is used in the LAN environment where the
DHCP is activated. Generally, for mid/large scale,
DHCP servers are operated through LAN and for
small-scales, IP sharers use DHCP functions.
Video Quality
② Port Configuration
Item
Description
The connection port and http, ftp port
configurations can be set here and the DDNS use
can be checked.
Port Setting
39
Download from Www.Somanuals.com. All Manuals Search And Download.
30X PTZ Network Camera SNP-3300A
Use SWR changes its IP address every time the user
attempts to connect to the ISP and when the product
is connected to a cable modem or xDSL modem. In
this case, the user cannot know the changed IP
address. When a product that uses dynamic IP is
registered on the DDNS server, when wishing to
connect to the product, the changed IP address can
be easily recognized. In order to register the IP
address to the DDNS server, set Use SWR as
Enabled.
Note
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Ch4. How to Use Web Viewer
Download from Www.Somanuals.com. All Manuals Search And Download.
30X PTZ Network Camera SNP-3300A
4.1. How to Use Web Viewer
4.1.1. Login
To connect to the login page, enter network camera IP address on
the internet web browser and press the enter key.
Enter user ID and password and push <Login> button, it then moves
to the appropriate Web page.
Default value is ID: admin, PW: 11111111
Note
If you click <Guest> button, it moves to WebViewer page under the
Guest authenticated status. However, administrator has to permit
guest access for this.
If you logged in first in administrator mode, please
change the password of administrator. It can
prevent other users from connecting to the
administration page.
Note
42
Download from Www.Somanuals.com. All Manuals Search And Download.
4.1. How to Use Web Viewer
4.1.2. Web Viewer screen
Web Viewer screen is composed of menu area for camera/video
configuration and screen area for displaying input video from
camera.
„ Controls
Flip Image
Vertical reversal of channel screen
43
Download from Www.Somanuals.com. All Manuals Search And Download.
30X PTZ Network Camera SNP-3300A
Stretch Image
When selecting resolution with Half D1 and CIF, stretches
channel screen to resolution D1 size.
Save Image
Saves channel screen to ‘JPEG file’.
Quad
Converts to 4 split screens (applied only to 4 channel server).
Channel
Video server channels (applies only to
4channel servers)
- CH1~CH4
Compression
Video compression mode (the mode of
compressing video)
- MPEG, JPEG
Resolution
Video resolution (the size of video screen
transmitted)
- NTSC : D1(704x480), Half D1(704x240),
CIF(352x240)
- PAL : D1(704x576), Half D1(704x288),
CIF(352x288)
Frame Rate
The number of maximum video frame
transmitted for each second.
- 1, 5, 10, 15, 20, 25, 30
Quality
Quality Configures video quality
- Very High, High, Normal, Low, Very Low
44
Download from Www.Somanuals.com. All Manuals Search And Download.
4.1. How to Use Web Viewer
Pause
OSD
Stops video for a while.
Displays related information.
Displays the title
Removes the title
45
Download from Www.Somanuals.com. All Manuals Search And Download.
30X PTZ Network Camera SNP-3300A
Deinterlace
On/off function of Deinterlace.
Screen where
Deinterlace is not
applied
Screen where
Deinterlace is not
applied
Deinterlace is a function to adjust the video quality
softly by eliminating the border line which was made
by an interlace function. The interlace function draws
an even line and an odd line of the Image one after
the other.
Note
46
Download from Www.Somanuals.com. All Manuals Search And Download.
4.1. How to Use Web Viewer
Camera Setup
Displays OSD control button of camera.
Camera OSD
control button is
displayed
Camera OSD is
displayed
Day&Night configuration function
(Color, B/W configuration)
Day&Night
PTZ Control
PTZ control function
Screen where
camera PTZ
control window is
displayed
47
Download from Www.Somanuals.com. All Manuals Search And Download.
30X PTZ Network Camera SNP-3300A
The left/right slide bar can control focus (left slide
bar) / zoom (right slide bar)
Note
The “+” displayed in the middle can be pressed using
the mouse as the base point of the Pan / Tilt and it
will Pan /Tilt according to that point.
Instruction for Camera OSD control button
<↑>, <↓> button
Moves selection displaying arrows up and down on
camera OSD menu.
<←>, <→> button
Changes configuration of selected field on camera OSD
menu.
<Set> button
Displays camera OSD or moves to upper/lower menu of
selected field.
<Exit> button
Terminates camera OSD.
※ For configuring the function and detail operating method of 30X
PTZ Network Camera SNP-3300A, refer ‘Ch5. How to Operate
Camera’.
48
Download from Www.Somanuals.com. All Manuals Search And Download.
4.1. How to Use Web Viewer
4.1.3. Area Zoom guide
Area Zoom function supports easy and fast PTZ (Pan/Tilt/Zoom)
control for the selected image area on the monitor.
Screen image of menu popped up by clicking mouse right button
ƒ
Clicking mouse right button delivers menu of Area Zoom function.
Screen image of Area Zoom pointer appeared by Area Zoom selection
ƒ
Clicking Area Zoom menu delivers Area Zoom mode showing yellow colored
Area Zoom pointer at the center of monitor.
49
Download from Www.Somanuals.com. All Manuals Search And Download.
30X PTZ Network Camera SNP-3300A
Screen image of new PTZ position moved by one time click.
ƒ
Clicking mouse left button only controls PTZ position at Area Zoom mode.
Screen image of selected image area in the mouse dragged square
ƒ
Clicking mouse left button and dragging a square shapes selected image area
on the monitor.
50
Download from Www.Somanuals.com. All Manuals Search And Download.
4.1. How to Use Web Viewer
Screen image of expanded area
ƒ
ƒ
Releasing mouse left button stimulates automatic PTZ function mode at the
selected image area.
At automatic PTZ function mode, Area Zoom pointer is enlarged and PTZ
function execution is not available.
Screen image of selected Move PTZ on menu
ƒ
ƒ
At the Move PTZ zone of menu popped up by clicking mouse right button, reset
function to 1x zoom, previous PTZ position, next PTZ position is available.
PTZ operation at Area Zoom mode stores five positions of before and after the
position change and deactivates Move PTZ zone of menu popped up by
clicking mouse right button.
51
Download from Www.Somanuals.com. All Manuals Search And Download.
30X PTZ Network Camera SNP-3300A
Storage item
Function
Go to 1x Zoom
Previous PTZ
Forward PTZ
Move to 1x Zoom from present PTZ position
Move to previous PTZ position
Move to next PTZ position
52
Download from Www.Somanuals.com. All Manuals Search And Download.
4.2. Using Administration page
4.2. Using Administration page
4.2.1. Initialization Screen after Connecting
When connection is successful, the below screen will be displayed.
53
Download from Www.Somanuals.com. All Manuals Search And Download.
30X PTZ Network Camera SNP-3300A
4.2.2. Live
Please Move to Web Viewer page
[Web Viewer live screen]
54
Download from Www.Somanuals.com. All Manuals Search And Download.
4.2. Using Administration page
4.2.3. Basic
Configures basic information for camera.
Video/Audio Setup
Item
Description
Video compression mode
(Compression mode of video in the camera)
Compression
If the type of installed camera (NTSC/PAL) is
selected, then the size of screen on the
camera becomes selectable.
Video Size
Selects the quality of video screen. In case of
low speed internet, lower the video quality to
see seamless video.
Video Quality
55
Download from Www.Somanuals.com. All Manuals Search And Download.
30X PTZ Network Camera SNP-3300A
Item
Description
Configures the number of transmitted frame
per second in the camera.
Video FrameRate
Selects the video channel to be used in the
camera.
Video Channel
Selects whether to use the audio input
channel in the camera or not.
Audio-In Channel
Audio-Out Channel
Selects whether to use the audio output in the
camera or not.
Configures the number of users who can be
connected to the camera through the
network(1~20 persons)
Max User Count
Mic. Sensitivity
Audio amplifying function
onfigures Low for the microphone which has
amplifying function and High for the
microphone which has no amplifying function.
(In case of Line-In signal, configure Low)
Product Information
Item
Description
Model
Displays model name of the camera.
Displays MAC Address of the camera.
Mac Address
onfigures name of the camera, it help to classify
several cameras.
Camera Name
Location
The location of the installed camera can be
entered.
Additional description related to the camera can be
entered.
Description
Memo
The contact of camera administrator can be
entered.
56
Download from Www.Somanuals.com. All Manuals Search And Download.
4.2. Using Administration page
4.2.4. Network
Configures network information of the camera.
Network Configuration
According to the user’s network environment, it is classified into
LAN, xDSL, DHCP.
Item
Description
In case the camera is connected to the local
network or xDSL with a static IP address, configure
network information to be assigned to the camera.
LAN
In case of xDSL with a dynamic IP address, enter
password in UserName and Password field.
xDSL
This case is selected in case of using IP sharing
box/ cable modem.
DHCP
57
Download from Www.Somanuals.com. All Manuals Search And Download.
30X PTZ Network Camera SNP-3300A
Port/DDNS Configuration
Item
Description
This controls communication with camera.
(Default : 4000)
Connection
Port
HTTP Port/
FTP Port
This helps to connect to web page or FTP server.
(Default : http=80, ftp=21)
Select if use of SWR function is available. The way
of connection which used ID does not support.
Use SWR
Select if DDNS server is available. DDNS server is
connected to server without reference to changed
IP because there is possibility that floating IP
constantly is changed.
Use DDNS
※ A detailed explanation about DDNS usage refers to <Appendix A.
DDNS Usage>.
4.2.5. User
This describes password change for administrator or user
registration.
58
Download from Www.Somanuals.com. All Manuals Search And Download.
4.2. Using Administration page
Item
Description
Administrator
Password Change
Change password of administrator
User clicks ‘Guest’ button to decide whether
allowing guest to connect Main Viewer.
Guest Setup
Current User
You can register new user or delete, and set up
user’s authority.
※ Set up user authority
User’s authorities set up at ‘Current User’ are as follows.
Item
Description
Use video related setup function
(Compression, Resolution, Framerate, Quality)
Video
Control
Audio
Pan, Tilt, Zoom, Audio output, Alarm output
Audio Input
Whether relevant account is used
(If not checked, not allowed log-in)
USE
59
Download from Www.Somanuals.com. All Manuals Search And Download.
30X PTZ Network Camera SNP-3300A
Example 1) In case control function is limited (Do not check
Controls box)
※ Pan, tilt, zoom, audio output, alarm output function icon is
inactivated
Example 2) In case video function is limited (Do not check Video)
※ Compression, Resolution, Framerate, Quality set up icon is
inactivated.
60
Download from Www.Somanuals.com. All Manuals Search And Download.
4.2. Using Administration page
4.2.6. Pan/Tilt/Zoom
Configures PTZ Swing and Preset of the camera.
61
Download from Www.Somanuals.com. All Manuals Search And Download.
30X PTZ Network Camera SNP-3300A
Item
Description
Select the channel of camera.
Display PTZ menu.
Channel
PTZ Display
OSD Display
PTZ
Display OSD.
Set or delete(delete, delete all) the
Preset. Screen move the position of
Preset.
Camera
Configura
tion
Preset
Surveille Pan/Tilt Swing at the position
of preset, set up the swing menu.
Swing
Surveille repeatedly at the position of
preset, set up the Group menu.
Group
Indicate the first position of surveillant
Preset
First Setup
Second Setup
Indicate the second position of
surveillant Preset
Swing
Setup
Mode
Select Pan/Tilt Mode.
Speed
Set Swing speed between Presets.
Set interval time on Preset.
Set Group Number among 1~6
Set Preset included the Group.
Set swing Speed between preset.
Set interval time on Preset.
Duration
Group No.
Preset No.
Travel Speed
Dwell Time
Group
Setup
62
Download from Www.Somanuals.com. All Manuals Search And Download.
4.2. Using Administration page
4.2.7. Motion Detection
This sets up motion detection function of camera.
Item
Description
Basic grid, used to choose area on the screen, is
displayed or hidden.
Grid Display
When selecting motion detection area, click <Select
All> button to select all areas, or click <Deselect>
button to cancel the selected area.
Select Area
MD Enable
Decide whether you use motion detection function.
Setting up sensitivity to detect motion to adjust input
video by situation. You can select 1-5, and 5 is the
highest.
MD Sensitivity
63
Download from Www.Somanuals.com. All Manuals Search And Download.
30X PTZ Network Camera SNP-3300A
4.2.8. Alarm/Sensor
This sets up necessary information when using alarm function by
attaching sensor to camera.
64
Download from Www.Somanuals.com. All Manuals Search And Download.
4.2. Using Administration page
Alarm/Sensor Setup
◊ Digital In Setup
Item
Description
Types of sensors are ‘Normal open’ and ‘Normal
close.’ This selects up type of connected sensor.
Sensor Type
◊ Digital Out Setup
Item
Description
Set up Alarm Out responding when event is
recognized by connected sensor (Sensor 1) or
Motion Detection (MD)
Alarm
Duration
FTP
Set up time to operate relay. It means the period
from the time when sensor detects event to the
time when relay is released.
In case event occurs by sensor (Sensor 1) or
Motion Detection (MD) on the screen, decide
whether transferring related information to FTP.
In case event occurs by sensor (Sensor 1) or
Motion Detection (MD) on the screen, decide
whether transferring related information by e-mail.
E-mail
E-mail/FTP Setup
Set up FTP server and e-mail information to which related
information is transferred in case alarm occurs.
Item
Description
Mode
FTP
Select media for data transfer.
Enter domain or IP address of FTP
server.
Server Name
Set up home directory to save relevant
data at FTP server.
Home Directory
User ID
Enter ID to connect FTP server.
Enter PW to connect FTP server.
User Password
65
Download from Www.Somanuals.com. All Manuals Search And Download.
30X PTZ Network Camera SNP-3300A
Item
Description
Recipient E-mail
Address 1
Recipient E-mail
Address 2
You can designate up to two e-mail
address receiving data when alarm
occurs.
In case you use outside e-mail server,
enter the name of the outside e-mail
server.
Server Name
E-mail
ID
Enter ID to connect the outside e-mail
server.
Enter PW to connect the outside e-
mail server.
Password
Mail Subject
Mail Body
Enter the subject of mail to be
transferred.
Enter the body of mail to be
transferred.
If motion is detected, the contents transferred by e-
mail or to FTP are varied according to the set-up of
‘Video Compression’ at Admin page (Basic).
Note
ƒ
MPEG : Video length is set by ‘Duration’ of ‘Digital
Out Setup’.
File extension is ‘ste’, you can play this by
supplied Player.
ƒ
JPEG : JPG type image file attached.
66
Download from Www.Somanuals.com. All Manuals Search And Download.
4.2. Using Administration page
4.2.9. Time
Current Time
Item
Date
Description
Current setup date displayed
Current setup time displayed
Time
Time Setup
Item
Description
Set Manually
Time Server
Adjust time manually.
Set up address of time server for Server 1 - 5.
67
Download from Www.Somanuals.com. All Manuals Search And Download.
30X PTZ Network Camera SNP-3300A
4.2.10. LOG
Recent activities made for camera are displayed as log.
Item
Description
Lines
View
Clear
Set up number of lines of the list.
Log is viewed with number of lines you set up most
recently.
Delete logs.
68
Download from Www.Somanuals.com. All Manuals Search And Download.
4.2. Using Administration page
4.2.11. Upgrade
Upgrade program of 30X PTZ Network Camera SNP-3300A.
System Upgrade Configuration.
Item
Description
Upgrade firmware and Web-page of 30X PTZ
Network Camera SNP-3300A.
Firmware/Web
Factory Mode Setup
If you click <Reset> button, server is returned to initial value when
shipped from the factory after confirmation procedure by
administrator.
69
Download from Www.Somanuals.com. All Manuals Search And Download.
30X PTZ Network Camera SNP-3300A
4.2.12. System Reboot
Server is rebooted after confirmation procedure of administrator.
Click <OK> button to reboot server.
70
Download from Www.Somanuals.com. All Manuals Search And Download.
Ch5. How to Operate Camera
Download from Www.Somanuals.com. All Manuals Search And Download.
30X PTZ Network Camera SNP-3300A
5.1. OSD Menu Oganization
Dome camera can be set up on the OSD(On Screen Display) menu
displayed on the video monitor by Network.
Menu
Function
Menu
Function
Move up on the OSD
menu
Move left on the OSD
menu
TILT UP
PAN LEFT
Move down on the
OSD menu
Move right on the
OSD menu
TILT DOWN
PAN RIGHT
① Camera Setting
P1
P2
P3
P4
Defaults
①Focus
①Focus Mode
Auto/Manual/
One Shot AF
OneShot
AF
②Zoom Tracking
Mode: On/Off
Speed: Slow/Fast
ON
Fast
➌Digital Zoom
AWB Mode
Off/2X/4X/8X
ATW/AWC/MANUAL
►ATW
OFF
ATW
➋White
Balance
-ATW(I): Indoor
-ATW(O): Outdoor
►Manual
-Temperature
2000K/3200K/5100
K
3200
100
-Red
100
-Blue
③Exposure
➊Brightness
50
050
➋Iris
Auto
Manual: Iris Level
---
Auto
050
ESC
➌Shutter
A.FLK
Manual: 1/60~1/120,
000, x2~x128
Auto: Sens-Up Limit
x1~x128
1/60
X4
➍Sens-Up
ESC
➍Back Light
WDR
WDR Limit:
High/Middle/Low
Middle
Off
OFF
➎AGC
➏SSNR
➐Day
Night
High/Middle/Low/Off
High/Middle/Low/Off
Auto
Middle
MIDDLE
&
B/W
B/W Burst: On/Off
Burst Level
Burst
ON
150
Color
72
Download from Www.Somanuals.com. All Manuals Search And Download.
5.1. OSD Menu Oganization
P1
P2
P3
P4
Defaults
⑧Others
➊Sync
Internal
Line Lock:
Line Lock Phase
Tone
Sharpness
Color
225
②Image Adj.
005
050
050
Off
➌Freeze
On/Off
② Sequence Setting
P1
P2
P3
P4
초기값
①Preset
①Setting ②Edit ③Execute ④Clear ⑤Status
②Swing SEQ
①Pan Swing
②Tilt Swing
③P/T Swing
①Group1
②Group2
③Group3
④Group4
⑤Group5
⑥Group6
①Setting ②Execute ③Clear
①Setting ②Execute ③Clear
①Setting ②Execute ③Clear
①Setting ②Execute ③Clear
①Setting ②Execute ③Clear
①Setting ②Execute ③Clear
①Setting ②Execute ③Clear
①Setting ②Execute ③Clear
①Setting ②Execute ③Clear
③Group SEQ
④Tour SEQ
①Setting ②Execute ③Clear
⑤PTZ Trace
①Trace1
②Trace2
③Trace3
④Trace4
①Mode
①Replay ②Memorize
①Replay ②Memorize
①Replay ②Memorize
①Replay ②Memorize
➊Off
⑥Auto Run
OFF
➋Preset: Preset No
③Swing: Swing Mode
Pan/Tile/P&T
➍Group: Group No
➎Tour
➏Trace: Trace1~Trace4
⑦A.Pan
- ①Auto Pan Speed: 20~50
- ②Tilt Angle: 10~45
1~59(Sec), 1~59(Min)
32
25
30sec
OFF
➋Time
On/Off
⑦Power On
Resume
73
Download from Www.Somanuals.com. All Manuals Search And Download.
30X PTZ Network Camera SNP-3300A
③ P/T Setting
P1
P2
P3
P4
초기값
①Pan Limit
➊Position
➋ON/OFF
➊Position
➋ON/OFF
①Area1
②Area2
③Area3
④Area4
⑤Area5
⑥Area6
⑦Area7
⑧Area8
②Tilt Limit
③Area Setting
➊Area Name
➋Position
➌ON/OFF
④Area Masking
①Mask1
②Mask2
③Mask3
④Mask4
⑤Mask5
⑥Mask6
⑦Mask7
⑧Mask8
ON/OFF
ON/OFF
ON/OFF
➊Position
➋ON/OFF
➎Prop.P/T
➏Digital Flip
➐Image Hold
ON
ON
OFF
④ OSD Setting
P1
P2
P3
P4
초기값
①Camera Name
➋Preset Number
③Preset Name
➍Sequence Status
➎Area Name
➏PTZ Position
➐Language
①Edit ②ON/OFF
ON/OFF
①Edit ②ON/OFF
ON/OFF
ON/OFF
ON/OFF
ON
ON
OFF
ON
English
English/中文
74
Download from Www.Somanuals.com. All Manuals Search And Download.
5.1. OSD Menu Oganization
⑤ Initialize
P1
P2
P3
P4
초기값
①Power On Reset
②Factory Default Set
③Camera Default Set
➍Auto Refresh
➊Cancel ➋Execute
➊Cancel ➋Execute
➊Cancel ➋Execute
OFF, 1~7Days
OFF
➏ Status
P1
P2
P3
P4
초기값
Preset setting is only possible on the OSD menu or
using the Webpage.
Note
Note
Symbol Description
ƒ
When there are sub menus under the selected
OSD menu.
Numbers are displayed in white color like ➊ on
the right top of the screen.
ƒ
When there is no sub menu under the selected
OSD menu.
Numbers are displayed in black color like ① on
the right top of the screen.
75
Download from Www.Somanuals.com. All Manuals Search And Download.
30X PTZ Network Camera SNP-3300A
5.2. Camera Setting
5.2.1. White Balance
The White Balance function corrects the abnormal white color into
the normal white color under any color temperature lighting.
Select the mode among ATW, AWC and Manual. ATW is selected
by default.
„ WB Mode
ƒ
ATW
Balances the color automatically depending on the source of light
from 1,800~10,500K color temperature
- Indoor[ATW(I)] : Use this mode in the area under the limited
color temperature.
- Outdoor[ATW(O)] : Use this mode in the area under the broad
color temperature.
ƒ
AWC:
Set up the lighting to the objects and corrects the right color
temperature to that of a white object. Camera works under the
setup conditions. For the most appropriate condition under the
current illumination, capture the white paper and then change the
mode into AWC. Press the Enter key and then AWC Start will be
displayed. When the adjustment is completed after pressing the
Enter key for AWC Start, go to the upper menu. When conditions
change, adjust the white balance function again
76
Download from Www.Somanuals.com. All Manuals Search And Download.
5.2. Camera Setting
ƒ
Manual
Fine tuning is possible through this manual control mode. Select
the color temperature and increase or decrease the Red or Blue
values to shift the color of the object.
Temperature: Select one temperature among 2,000K, 3,200K and
5,100K.
- Red: Red Gain can be changed.
- Blue: Blue Gain can be changed.
White Balance may not function properly under the
following conditions.
Note
ƒ
When the color temperature surrounding the
object is very high. (e.g. clear sky or sunset)
ƒ
ƒ
When it is dark around the object.
When the camera is pointing towards a fluorescent
lamp directly or when lighting conditions change a
lot.
5.2.2. Exposure
Camera exposure can be controlled.
➊Brightness
The brightness of the screen can be adjusted.
77
Download from Www.Somanuals.com. All Manuals Search And Download.
30X PTZ Network Camera SNP-3300A
➋Iris
Auto mode or manual mode can be selected.
ƒ
ƒ
Auto: The brightness of the image signal can be adjusted
automatically depending on the amount of light.
Manual: The brightness of the image can be adjusted.
➌Shutter
ƒ
ƒ
ƒ
---: Electronic shutter mode is enabled. The shutter speed is
controlled automatically according to the brightness of the screen.
A.FLK: Use this mode when the screen flickers because of
inconsistent frequency with the surrounding lights.
Manual
- Select any function you wish to operate by using the UP and
DOWN buttons.
- Shutter speed can be adjusted from 1/60 second to 1/120,000
second.
- Sens-Up function can be operated manually from x2 ~ x128.
ƒ
ƒ
Do not use this function with WDR of Back Light
menu at the same time for effective A.FLK
function.
Note
If the Shutter mode is ESC in the inner
synchronization mode and the camera faces to the
bright fluorescent lamp directly, the image may be
unstable. Be careful to select the installation
location.
ƒ
If the Manual or A.FLK mode is selected for the
Shutter menu, the Sens-Up function is disabled.
78
Download from Www.Somanuals.com. All Manuals Search And Download.
5.2. Camera Setting
➍Sens-Up
ƒ
Auto: The low light level of the night or dark condition is detected
automatically and the bright and clear image can be maintained.
- Sens-Up Limit: Maximum accumulated magnification can be
selected.
ƒ
Off: Sens-Up function is cancelled.
As the accumulated magnification increases, the
Note
screen goes bright. But, the after image of the
moving object also becomes larger and the optimum
Auto Focus function may not work
5.2.3. Back Light
As Samsung’s own SV-III DSP chip technology is adopted, even
under excessive backlight condition, both the object and the
background can be displayed clearly unlike other cameras.
ƒ
ƒ
WDR : When both, bright and dark areas exist, the objects of the
two areas can be seen clearly.
- WDR Limit: High, Middle or Low mode can be selected.
Off : WDR function is cancelled.
79
Download from Www.Somanuals.com. All Manuals Search And Download.
30X PTZ Network Camera SNP-3300A
ƒ
ƒ
When the Shutter menu is in Manual mode, WDR
function cannot be used.
Note
When the WDR function is used, the following
results may occur depending on lightning
conditions. Under these conditions, turn off the
WDR mode.
- Unnatural color change or unnatural screen
may occur.
- There may be noises in the bright area of
the screen.
ƒ
ƒ
WDR performance may vary depending on the
bright areas on the screen. Thus, optimize the
camera installation angle for optimized WDR
function.
If the WDR Limit is increased, the screen may
become unnatural.
5.2.4. AGC
When the brightness of the image taken under dark light is under a
certain level, the AGC (Automatic Gain Control) functions to define
whether to control the Gain automatically or not.
ƒ
Select one mode among High, Middle, Low or Off.
80
Download from Www.Somanuals.com. All Manuals Search And Download.
5.2. Camera Setting
5.2.5. SSNR (Samsung Super Noise Reduction)
SSNR function reduces background noise under low light conditions
differently in different modes. The noise reduction effect grows in
Off, Low, Middle and High modes in order.
ƒ
ƒ
ƒ
OFF : No noise reduction effect.
LOW : Noise reduction effect is small but there is little afterimage.
MIDDLE: Noise reduction effect is generally effective in this mode.
Noise can be reduced properly and the afterimage is not strong.
ƒ
HIGH : Noise reduction effect is excellent but afterimage is also
strong.
When you select the AGC mode as “OFF”, you
Note
cannot use the SSNR function.
5.2.6. Day & Night
The darkness level is detected automatically under low light
conditions such as at night or under dark light to keep the screen
bright and clear.
81
Download from Www.Somanuals.com. All Manuals Search And Download.
30X PTZ Network Camera SNP-3300A
ƒ
ƒ
ƒ
COLOR : Output images are displayed in color all the time. Burst
signal size can be adjusted.
B/W : Output images are displayed in black and white all the time.
Burst signal can be kept or removed.
AUTO : Under day condition, the mode is automatically changed
into the COLOR mode to keep an optimum color. At night, the
mode is automatically changed into the B/W mode to distinguish
dark images clearly.
ƒ
ƒ
If the AGC is in OFF mode, the Auto mode cannot
be used. Only COLOR or B/W mode can be used.
Note
If the sunlight or halogen lamp is used in B/W mode,
the focus may be blurred compared with the general
illumination.
82
Download from Www.Somanuals.com. All Manuals Search And Download.
5.2. Camera Setting
5.2.7. Others
➊Sync
Internal Sync or Line Lock can be selected. Internal Sync is
selected by default. Line Sync function can adjust the output
phase of more than 1 unit without using sync signal generator.
When the AC Line Lock is selected, the phases can be adjusted
from 0 to 360 levels. Accordingly, the phase can be adjusted up to
360°.
ƒ
ƒ
ƒ
Internal : Internal synchronization
Line Lock : Power line synchronization
Line Lock Phase : The phase of line sync can be selected from
0° to 360°. Initial value is 225°.
②Image Adj.
Brightness, sharpness and color density of the image signal can
be adjusted.
ƒ
ƒ
ƒ
Tone : The overall brightness of the screen can be adjusted.
Sharpness : The overall sharpness of the image can be adjusted.
Color : The overall color density of the image can be adjusted.
➌Freeze
Moving image can be stopped and replayed.
ƒ
ƒ
ON: Image can be frozen.
OFF: Frozen image is released and the film is replayed.
83
Download from Www.Somanuals.com. All Manuals Search And Download.
30X PTZ Network Camera SNP-3300A
5.3. Sequence Setting
Sequence Setting Menu
5.3.1 Preset
12 items such as Pan/Tilt location, Zoom and Focus are selected
among camera functions and they can be called for monitoring.
Total 128 points can be preset.
ƒ
Edit : You can edit the 11 preset items such as Pan/Tilt location,
Zoom and Focus, which are selected among camera functions.
ƒ
ƒ
ƒ
Execute : Select the Preset number for execution.
Clear : Select the Preset number to delete for clearing.
Status : The current Preset number setup is displayed.
84
Download from Www.Somanuals.com. All Manuals Search And Download.
5.3. Sequence Setting
„ Preset Menu Setting
1. Select the Preset item on the Sequence Setting Menu.
2. Select the Setting item.
3. Select the Preset number.
4. Set up the Zoom and Focus.
5. If you want to edit the camera function setup items, go to each
item and select it.
6. If you select the Scene Adj. item, such items as Shutter, AGC,
SSNR, Sens-Up and White Balance can be set up differently in
every Preset item.
85
Download from Www.Somanuals.com. All Manuals Search And Download.
30X PTZ Network Camera SNP-3300A
5.3.2. Swing SEQ
Swing surveillance can be executed and set up and the data can be
deleted.
ƒ
ƒ
ƒ
Pan Swing : Swing surveillance for the Pan direction is executed
and set up. Data is deleted.
Tilt Swing : Swing surveillance for the Tilt direction is executed
and set up. Data is deleted.
P&T Swing : Swing surveillance both for the Pan and the Tilt
directions are executed and set up simultaneously. Data is
deleted.
- Setting : Preset Position for Swing is selected and confirmed.
SPD is the moving speed (1-64 °/sec). DWL is the stop time
(1-128 sec).
- Execute : Swing surveillance is executed.
- Clear : Data in the Swing function is deleted.
86
Download from Www.Somanuals.com. All Manuals Search And Download.
5.3. Sequence Setting
5.3.3. Group SEQ
Sequence surveillance can be executed and set up and data can be
deleted. Up to 6 groups can be registered.
ƒ
Setting : Preset position for swing is selected and confirmed.
SPD is the moving speed (1-64 °/sec). DWL is the stop time (1-
128 sec).
ƒ
ƒ
Execute : Swing surveillance can be executed.
Clear : Swing data can be deleted.
5.3.4. Tour
Group surveillance can be executed and set up and data can be
deleted.
ƒ
Setting : The registered Group Sequence is selected and
confirmed. If the selected number is not registered, it cannot be
input.
ƒ
ƒ
Execute : Group surveillance is executed.
Clear : Group surveillance data are deleted.
87
Download from Www.Somanuals.com. All Manuals Search And Download.
30X PTZ Network Camera SNP-3300A
5.3.5. PTZ Trace
Maximum 4 patterns of the manual operation paths (for Pan, Tilt,
Zoom and Focus) are memorized and replayed.
If the operation range is limited using ①Pan Limit
and ②Tilt Limit, please note that other operations
beyond the limited operation range are not possible.
Note
ƒ
Memorize: Manual operations for minimum 120 seconds after
executing this function are memorized into the internal memory.
Nevertheless, the memorizing time becomes different depending
on the PTZ operation. OVER mark will finish this function.
If the operation range is limited using ①Pan Limit
and ②Tilt Limit, only the operations within the limited
range are memorized.
Note
5.3.6. Auto Run
If there is no operation by the user for a certain time, the sequence
operation designated by the user will be executed.
ƒ
Mode:
- OFF : Auto Run will be cancelled.
- Preset : Auto Run in the corresponding Preset number
88
Download from Www.Somanuals.com. All Manuals Search And Download.
5.3. Sequence Setting
- Swing : Auto Run in the corresponding Swing mode
- Group : Auto Run in the corresponding Group number
- Tour : Auto Run in the corresponding Tour number
- Trace : Auto Run in the corresponding Trace number
- A. Pan : 360° Auto Run in Pan direction
Auto Pan Speed: Pan operation in the speed designated by
the user
Tilt Angle: The tilt angle set up by the user is kept.
ƒ
Time : Auto Run operation is executed after a certain time
designated by the user.(Time can be set up by the unit of 1-59
sec and 1-59 min.)
5.3.7. Power On Resume
When the power supply for the camera is stopped for some reason,
such as electricity failure, and resumed, the Sequence Settings
before the power off are restored.
89
Download from Www.Somanuals.com. All Manuals Search And Download.
30X PTZ Network Camera SNP-3300A
5.4. P/T Setting
5.4.1. Pan Limit
The moving range in the Pan direction can be limited.
ƒ
ƒ
Position : Moving range can be set up. Set the position from the
left. The stop position may change due to the initialization by
such operation as power resumption depending on position
setting. This does not mean it is out of order.
On/Off : When this function is on, the limit is effective. Default
setting is Off.
5.4.2. Tilt Limit
Moving range in the tilt direction can be limited.
ƒ
Position : Moving range can be set up. Set the position from the
top direction. The stop position may change due to initialization
by such operation as power resumption depending on position
setting. This does not mean it is out of order.
90
Download from Www.Somanuals.com. All Manuals Search And Download.
5.4. P/T Setting
ƒ
On/Off : The application of limitation will be determined. Default
setting is Off.
5.4.3. Area Setting
Areas can be indicated. Areas can be designated up to 8.
ƒ
ƒ
ƒ
Area Name : Area name can be set up. A maximum of 12 letters
(English, Chinese, numbers) can be entered. When you finish
inputting the name, adjust the position mark to "SET".
Area Position : Area range can be designed. If the area range is
overlapped, the smaller area number will indicate the overlapping
part.
On/Off : It can be determined whether or not to activate the area
mark. The activation becomes effective as soon as the position
moves from the current area to other areas. Set up the OSD
Setting as ON. If it is in OFF mode, this function does not work.
Default setting is OFF.
91
Download from Www.Somanuals.com. All Manuals Search And Download.
30X PTZ Network Camera SNP-3300A
5.4.4. Area Masking
If you want to exclude some areas for surveillance, they can be
turned into black. You can mask 8 parts of one screen (maximum 32
parts).
ƒ
ƒ
Position : Detect the position for screen operation from the left.
On/Off : Operation of screen area masking can be determined.
Default setting is OFF.
5.4.5. Prop. P/T
Pan and Tilt speeds can be changed depending on zoom
magnification. Tele will slow down the speed of Pan/Tilt and Wide
will increase the Pan/Tilt speed. It will take about 15 seconds for 1
cycle in Tele mode and about 1.5 seconds in the Wide mode. Default
setting is ON.
92
Download from Www.Somanuals.com. All Manuals Search And Download.
5.4. P/T Setting
5.4.6. Digital Flip
When you operate the Tilt up to 90° limit and keep it for a certain
time, the image gets reversed automatically and the opposite Tilt
area is seen. When you want to monitor the moving object under the
camera, execute the Digital Flip function. You can observe the
moving object without reversing of the screen.
5.4.7. Image Hold
When moving from one Preset item to another Preset item, the
Preset image before moving can be held before the camera direction
reaches to the new Preset position. This function is for visual
convention of monitoring observer.
93
Download from Www.Somanuals.com. All Manuals Search And Download.
30X PTZ Network Camera SNP-3300A
5.5. OSD Setting
5.5.1. Camera Name
Camera ID indication is set up.
If you want to edit the item, move the cursor. Then
select the character.
Note
ƒ
ƒ
Edit : A maximum of 12 characters consisting of English (or
Chinese), numbers and special characters can be input for
Camera Name.
On/Off : The operation of this function is preset. Default setting is
On.
94
Download from Www.Somanuals.com. All Manuals Search And Download.
5.5. OSD Setting
5.5.2. Preset Number
Preset numbering is set up. (Default setting is ON.)
5.5.3. Preset Name
ƒ
Edit : A maximum of 12 characters consisting of English (or
Chinese), numbers and special characters can be input for
Preset Name.
95
Download from Www.Somanuals.com. All Manuals Search And Download.
30X PTZ Network Camera SNP-3300A
ƒ
On/Off : The operation of this function is predetermined. Default
setting is On.
5.5.4. Sequence Status
Display of the Sequence Group is set up. (Default setting is ON.)
5.5.5. Area Name
Display of Area Name is set up.
96
Download from Www.Somanuals.com. All Manuals Search And Download.
5.5. OSD Setting
5.5.6. PTZ Position
Pan and Tilt position and Zoom magnification are displayed.
PTZ positions are not displayed in the OFF mode. (Only manual
operation can display them.)
5.5.7. Language
It selects a language.(English, Chinese)
97
Download from Www.Somanuals.com. All Manuals Search And Download.
30X PTZ Network Camera SNP-3300A
5.6. Initialization Setting
Initialization Menu
①Power On Reset
Camera is initialized into the original status of power input.
②Factory Default Settings
Camera is initialized into the factory default settings. Data including
Preset is deleted. This function is used for initialization all settings.
③Camera Default Settings
If only the camera module is replaced due to camera module failure,
the new camera module can be set up with the settings of the old
camera module.
➍Auto Refresh
The electric circuit and the status of the equipment parts within the
camera are optimized regularly. (The cycle can be set up.) If camera
faces toward a certain source of light or if the settings cannot be
kept because of the long time rotation filming of a certain area, the
Auto Refresh function is used to maintain and re-set the existing
camera settings. Default setting is OFF.
ƒ
OFF, 1-7 Days : This function is disabled in the OFF mode. 1-7
Days enables the Auto Refresh operation in the interval of the
selected days. Auto Refresh takes less than 10 seconds. The
message “Auto Refresh” disappears after finishing the operation.
98
Download from Www.Somanuals.com. All Manuals Search And Download.
5.7. Status
5.7. Status
The status of dome camera setting is displayed.
CAM MODEL= 30NC
CAM VERSION= 03.06
DOME VERSION= 00.1
DOME ID= 001
Camera Model
Camera S/W Version
Control Board S/W Version
Dome Camera ID
CONTROLLER= Duplex-9600
Communication Mode Setup
99
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Ch6. Troubleshooting
Download from Www.Somanuals.com. All Manuals Search And Download.
30X PTZ Network Camera SNP-3300A
If there are problems in operation, please refer to the items below. If
the problem persists, please contact the agent you purchased this
product from.
Problem
Solution
ƒ
ƒ
Please check the power connection.
Nothing appears on the
screen.
Please check the video signal line
connection.
ƒ
Open MS-DOS window to check
whether 30X PTZ Network Camera
SNP-3300A is connected to network.
※ In case of ping 192.168.1.100,
replace it with IP address set up at
server
The video image is not
clear.
ƒ
Please check if the lens is clean.
Please clean the lens with a clean
cloth or brush.
ƒ
ƒ
Please adjust the contrast feature of
the monitor.
Please make sure that the screen is
not exposed directly to a bright light.
Please move the camera if necessary.
The screen is dark.
ƒ
ƒ
Please adjust the contrast feature of
the monitor.
If you have an intermediate device, set
the 75Ω/Hi-z properly, and check the
terminals.
There is a problem with
the camera operation.
The camera surface is
too hot and black
stripes appear on the
screen.
ƒ
Please check if an appropriate power
source to the camera complies with
the
manufacturer's
standard
requirement, or if the voltage keeps
changing.
102
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Problem
The MOTION
DETECTION function is
not working.
Solution
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ
Please check if 'MOTION
DETECTION' mode is turned on.
Please check if the MD LEVEL is too
low.
Please check the setting of the MD
AREA.
Inspect the cables(power or network)
connected to the device.
When camera cannot
be controlled for Pan/
Tilt/ Zoom
Connect to Admin page to check
whether user control is selected.
Please check the 'WHITE BAL'
setting.
Colors are not quite
right.
Please check if the camera is facing
directly into sunlight or fluorescent
light.
The screen is
flickering.
ƒ
Please check the frequency of power
supply (60Hz for NTSC, 50Hz for
PAL).
L/L mode isn't able to
be selected.
ƒ
ƒ
ƒ
ƒ
Please check if the AGC menu is set
to the OFF position.
DAYNIGHT(Auto) mode
is not working.
Please check if the AGC menu is set
to the OFF position.
SENS-UP function is
not working.
Please check if the SHUTTER menu
is set to MANUAL mode.
Please check the limit of SENS-UP
AUTO mode.
103
Download from Www.Somanuals.com. All Manuals Search And Download.
30X PTZ Network Camera SNP-3300A
Problem
Solution
ƒ
ƒ
ƒ
Please check the audio is selected
from admin page.
Audio is not working
Please check speaker volume from
the viewer.
In case input sound through
microphone at Viewer is not outputted
through Audio Out of server, please
check whether Audio Out channel is
selected at admin page. Or check
whether microphone is available at
Viewer.
ƒ
ƒ
Please check audio driver is working
in user’s PC.
Please check whether network cable
of 30X PTZ Network Camera SNP-
3300A is correctly connected
Video is stopped
ƒ
ƒ
In case user uses hub or IP router,
check
whether
these
network
equipments are working properly.
Open MS-DOS window and check
whether 30X PTZ Network Camera
SNP-3300A is connected to network.
ƒ
ƒ
ƒ
ƒ
Click ‘refresh (shortcut; F5) ’ button at
browser to recall the page
No image from web
viewer
Check whether power of camera and
network cable is properly connected.
Check whether computer is connected
to network.
If you use hub or router, check
whether such equipments are properly
operated.
(Note: Open MS-DOS window and
enter network ID of camera at ping
192.168.1.100)
ƒ
Connect to Admin page to check
whether video output is selected.
104
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Problem
Solution
ƒ
Video may not be viewed since Divx
codec is not installed in user’s PC.
Divx codec can decode video
compressed with MPEG4. Download
and install the latest Divx codec, and
check video.
Image transferred to
FTP or by E-mail
cannot be viewed
http://www.divx.com/divx/download
105
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix A. DDNS Usage
Download from Www.Somanuals.com. All Manuals Search And Download.
30X PTZ Network Camera SNP-3300A
Registration process of DDNS is as following:
€ Step1) Complete the registration form in iPOLiS
website.
The website is ‘www.samsungipolis.com’.
Figure A-1. Website of iPOLiS
108
Download from Www.Somanuals.com. All Manuals Search And Download.
DDNS Usage
Figure A-2. Membership Registration: SIGNUP
Figure A-3. Membership Registration: Input your information.
109
Download from Www.Somanuals.com. All Manuals Search And Download.
30X PTZ Network Camera SNP-3300A
€ Step2) Register the equipment after login.
Figure A-4. Login
Figure A-5. The list of registered equipment.
110
Download from Www.Somanuals.com. All Manuals Search And Download.
DDNS Usage
Figure A-6. Product Registration.
(Confirm repetition certainly at domain registration.)
Figure A-7. The list of registered equipment.
111
Download from Www.Somanuals.com. All Manuals Search And Download.
30X PTZ Network Camera SNP-3300A
€ Step3) Configure DDNS information in the
equipment.
Click the part of Network Configuration in website of Network
Camera.
Click “USE DDNS” in order to do “Enable” and input the address of
DDNS Server.
(Default: www.samsungipolis.com )
Enter the ID and Password that is written when register product is in
iPOLiS website.
The Configuration of DDNS in SNP-3300A is Completed.
112
Download from Www.Somanuals.com. All Manuals Search And Download.
DDNS Usage
€ Step4) Confirm the connection status of
relevant product in product list of iPOLiS
website.
Figure A-8. The List of Product.
Be able to confirm the information of connected
equipment if click <check> button of ‘Product information’.
113
Download from Www.Somanuals.com. All Manuals Search And Download.
30X PTZ Network Camera SNP-3300A
Figure A-9. Product information
Move to Login website of relevant product if click <view>
button of ‘ view’.
The buttons which are <Edit> and <Delete> of ‘product
management’ move to relevant page through input
password to item that fertilize or erase information of
registered equipment in List of product.
Only, ‘ID(Domain)’ of product should establishes again as
‘ID(Domain)’ after deleting because it can’t be fertilized.
Figure A-10. Edit/Delete
114
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Specifications
Items
SNP-3300AN
SNP-3300AP
1/4” Color Vertical Double Density Interline CCD.
410.000pixel
Imaging device
TV
NTSC
PAL
Total Number of Pixels
Valid Pixel
Horizontal Scan
Frequency
811(H) X 508(V)
768(H) X 494(V)
15.734kHz
795(H) X 596(V)
752(H) X 582(V)
15.625KHz
Vertical Scan
Frequency
59.94Hz
50Hz
Synchronization
Image Output
S/N Ratio
Internal Sync/External Sync(AC Line Lock)
1.0p-p/75Ω
Higher than 50dB (AGC OFF)
520 TV Lines (Color)/570 TV Lines(B/W)
Horizontal Resolution
Minimum Light for
Object
Electronic Shutter
Sens-Up
0.4Lux(Color),0.08Lux(B/W)/(@50IRE),
0.0006Lux (Day & Night is On.)/(@50IRE)
Auto/Manual (1/60 - 1/120.000)
ON (x2 - x128 Fields) / OFF
Day & Night
WDR
ICR(Filter Switching) ON/OFF
52dB ON/OFF
ATW(Indoor/Outdoor Selection)/AWC/
Manual (1,800K - 10,500K)
White Balance
Fixed Shutter Speed
(1/100)
Fixed Shutter Speed
(1/120)
Flickerless Adjustment
Iris
Auto/Manual (Iris Level Adjustment Mode)
Low, Middle, High, Off
ON/OFF
Gain Control
OSD Display
Outline Correction
Contact Point Distance
Digital Zoom
Maximum Aperture
Rate
Adjustable Level
F3.3 ~ 99.0mm(30X Optical Zoom)
OFF, 2X, 4X, 8X(Total 240X Zoom)
Light Angle 1:1.6 Telescopic 1:3.7
F=3.3mm 58°(Horizontal) X 44.8°(Vertical)
f=99.0.mm 2.22°(Horizontal) X 1.68°(Vertical)
1.2m(Tele level)
Coverage Angle
Proximity Distance
Horizontal Rotation
Angle
360°
Horizontal Rotation
Horizontal Rotation
Speed
Manual/Program
Manual: 0.5° ~ 120°/s(64 levels)
Preset: 0.5° ~ 240°/s(64 levels)
Horizontal Minimum
Moving Angle
0.05°
Accuracy of Horizontal
Rotation Stop
0.30°
Vertical Rotation Angle
-4°~ 184° (Digital Flip)
115
Download from Www.Somanuals.com. All Manuals Search And Download.
30X PTZ Network Camera SNP-3300A
Items
SNP-3300AN
SNP-3300AP
Vertical Rotation
Manual/Program
Manual: 0.5°
240°/s(64 levels)
-
120°/s(64 levels) Preset: 0.5°
-
Vertical Rotation Speed
Vertical Minimum
Moving Angle
0.04°
Accuracy of Vertical
Rotation Stop
0.30°
Preset Position
Area Masking
Max 128 points
Max 8 locations
4 Alarm Inputs
2 Alarm Outputs
Alarm
(Relay: NC/NO/COM, 2A 30VDC Max)
Operating Temperature
Operating Humidity
Power, Voltage
Consumption Electricity
Dimension
0°C - +40°C
30% ~ 80%(Except for dew condensation)
AC 24V±10%
Max 18W
Ø155 X 243.4mm
Weight
Less than 2.5kg
- Ceiling Bracket: STB-330PC
- Indoor: Indoor Housing (STH-330PIV),
Embedded Housing(STH-330PEV)
- Outdoor: Outdoor Housing (STH-320PO)
- Wall Bracket: STB-270PWV
- Pendant Bracket: STB-496PPV
MPEG4 / MJPEG Selectable
NTSC :
Installation Conditions
Output Video Format
Output Resolution
704 x 480(D1), 704 x 240(Half D1), 352 x 240(CIF)
PAL
:
704 x 576(D1), 704 x 288(Half D1), 352 x 288(CIF)
Video Compression
Stage
5 stages (Very Low, Low, Middle, High, Very High)
Audio Format
Ethernet
Bi-directional audio, 8KHz ADPCM
10/100Mbps
HTTP, TCP/IP, PPPOE, FTP, SMTP, DHCP, DNS,
DDNS, NTP
Protocol
Dynamic IP
DDNS
Supports XDSL and DHCP
Supports DDNS
Area Zoom
Max. User
PC Viewer
Supports Area Zoom function
20 Users
Supplied
Web Page
Web ActiveX
Control
S/W
Embedded Web Server
※ The product design and dimensions may change without
previous notice for improvement of performance.
116
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
ƒ
ƒ
The copyright of this manual belongs to Samsung
Techwin Co. Ltd.
Note
Parts or the whole of this manual cannot be
reproduced or transmitted by any electric,
mechanic or audio method without the authorized
written approval of Samsung Techwin.
ƒ
The contents of this manual may be changed for
an improvement of functions.
117
Download from Www.Somanuals.com. All Manuals Search And Download.
30X PTZ Network Camera SNP-3300A
Dimension
118
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
SAMSUNG TECHWIN
SALES NETWORK
SAMSUNG TECHWIN CO.,LTD.
SAMSUNG OPTO-ELECTRONICS UK, LTD.
Samsung House, 1000 Hillswood Drive,
Hillswood Business Park Chertsey, Surrey KT16 OPS
Tel: +44-1932-45-5308 Fax: +44-1932-45-5325
145-3, Sangdaewon-dong, Jungwon-gu,
Seongnam-si, Gyeonggi-do 462-120, Korea
Tel: +82-31-740-8151~8 Fax: +82-31-740-8145
SAMSUNG OPTO-ELECTRONICS AMERICA, LTD.
1480 Charles Willard St. Carson, CA90746
Tel: +1-310-632-1234 Fax: +1-310-632-2195
www.samsungtechwin.com
www.samsungipolis.com
Download from Www.Somanuals.com. All ManuPa/NlsOS:eaZr6c8h0A6.n0d91D7o.0w1nBload.
|
Q See DVR 9004 User Guide
RedMax Chainsaw GZ3500T User Guide
Remington Power Tools Lawn Mower MPS6017A User Guide
Renesas Network Card H8S 2111B User Guide
Ricoh Printer SP 3400N User Guide
Rowenta Electric Shaver EP304 User Guide
Sanitaire Carpet Cleaner SC6090 Series User Guide
Sanus Systems TV Mount SSMK1 User Guide
Sanyo Battery Charger KR 900AAEC User Guide
Sanyo Projector PLV Z4000 User Guide