SP42Q2HL
SP47Q2HL
SP52Q2HL
SP54T8HL
SP43Q5HL1X
SP47Q5HL1X
PROJECTION TELEVISION
.............
√
Owner’s
Instructions
Register your product at www.samsung.com/global/register
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTENTS
Chapter 1: Your New Digital TV .................... 5
List of Features ..........................................................................................
Accessories ................................................................................................
Familiarizing Yourself with Your New TV ..................................................
Control Buttons ..............................................................................
Connection Jacks (Side or Front) ....................................................
Connection Jacks (Rear)..................................................................
Remote Control ..............................................................................
5
5
6
6
7
8
9
Chapter 2: Installation .................................... 10
Connecting VHF and UHF Antennas ........................................................ 10
Antennas with 300-ohm Flat Twin Leads ........................................ 10
Antennas with 75-ohm Round Leads .............................................. 11
Separate VHF and UHF Antennas .................................................. 11
Connecting Cable TV ................................................................................ 12
Cable without a Cable Box.............................................................. 12
Cable with a Cable Box that Descrambles All Channels .................. 12
Connecting to a Cable Box that Descrambles some Channels ........ 13
Connecting a VCR...................................................................................... 14
Connecting a Second VCR to Record from the TV .......................... 14
Connecting a DVD Player .......................................................................... 15
Connecting to Y, PB, PR .................................................................. 15
Connecting to Regular Audio and Video Jacks ................................ 15
Connecting a Digital TV Set-Top Box ........................................................ 16
Connecting to Y, PB, PR .................................................................. 16
Connecting a Camcorder............................................................................ 16
Installing Batteries in the Remote Control.................................................. 17
Chapter 3: Operation ...................................... 18
Turning the TV On and Off........................................................................ 18
Plug & Play Feature .................................................................................. 18
Viewing the Menus and On-Screen Displays.............................................. 20
Viewing the Menus.......................................................................... 20
Viewing the Display ........................................................................ 20
Selecting a Menu Language ........................................................................ 21
Adjusting the Screen Automatically (Self Focus) ........................................ 22
Deactivating the Automatic Execution of the Self Focus.................. 23
Removing the “Self Focus” Message from the Display .................... 23
Adjusting Convergence Manually .............................................................. 24
Memorizing the Channels .......................................................................... 26
Selecting the Video Signal Source.................................................... 26
Storing Channels in Memory (Automatic Method).......................... 27
Adding and Erasing Channels .................................................................... 28
Changing Channels.................................................................................... 29
Using the Channel Buttons.............................................................. 29
Using the Number Buttons.............................................................. 29
Using the Previous Channel ............................................................ 29
Selecting Your Favorite Channels .............................................................. 30
To Store Your Favorite Channels .................................................... 30
To View Your Favorite Channels...................................................... 30
Labeling the Channels................................................................................ 31
English - 3
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTENTS
Chapter 3: Operation (continued)............................ 32
Picture Control .......................................................................................... 32
Customizing the Picture.................................................................. 32
Using Automatic Picture Settings .................................................... 33
Sound Control............................................................................................ 34
Adjusting the Volume...................................................................... 34
Using the MUTE Button.................................................................. 34
Customizing the Sound .................................................................. 34
Using Automatic Sound Settings .................................................... 35
Setting the Clock........................................................................................ 36
Viewing an External Signal Source ............................................................ 37
Setting the Signal Source .............................................................. 37
Assigning Names to External sources .............................................. 38
Chapter 4: Special Features............................ 39
Fine Tuning Channels ................................................................................ 39
Changing the Screen Size (Wide Mode) .................................................... 40
Changing the Screen Size (4:3 Mode) ........................................................ 41
Digital Noise Reduction ............................................................................ 42
Selecting the Color Tone ............................................................................ 43
Setting the Blue Screen Mode .................................................................... 44
Freezing the Picture .................................................................................. 44
Choosing a Multi-Channel Sound (MTS) track .......................................... 45
Auto Volume .............................................................................................. 46
Setting The On/Off Melody........................................................................ 46
BBE ............................................................................................................ 47
Viewing Closed Caption Information ........................................................ 48
Setting the On/Off Timer............................................................................ 50
Setting the Sleep Timer .............................................................................. 51
Customizing Your Remote Control ............................................................ 52
Setting Up Your Remote Control to Operate Your VCR
(Cable box or DVD player).............................................................. 52
Remote Control Codes .................................................................... 53
Chapter 5: Troubleshooting ............................ 54
Identifying Problems .................................................................................. 54
Appendix .......................................................... 55
Cleaning and Maintaining Your TV ............................................................ 55
Using Your TV in Another Country............................................................ 55
Specifications ............................................................................................ 55
English - 4
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter One
YOUR NEW TV
List of Features
Your TV was designed with the latest technology. This TV is a high-performance unit that
includes the following special features:
• Easy-to-use remote control
• Easy-to-use on-screen menu system
• Automatic timer to turn the TV on and off
• Adjustable picture and sound settings that can be stored in the TV’s memory
• Automatic channel tuning for up to 181 channels
• A special filter to reduce or eliminate reception problems
• Fine tuning control for the sharpest picture possible
• A built-in multi-channel sound decoder for stereo and bilingual listening
• Built-in, dual channel speakers
• A special sleep timer
• Component Video Input jacks to obtain a sharper image from external sources
• Adjusting the Screen Automatically (Self Focus)
Accessories
Once you have unpacked your TV, check to make sure that you have all the parts shown here.
If any piece is missing or broken, call your dealer.
Remote Control/
AAA Batteries
Holder-Caster
(SP52Q2HL/SP54T8HL)
Owner’s Instructions/
Safety Guide Manual
English - 5
Download from Www.Somanuals.com. All Manuals Search And Download.
YOUR NEW TV
Familiarizing Yourself with Your New TV
Control Buttons
You can control your TV’s basic features, including the on-screen menu. To use the more
advanced features, you must use the remote control.
• The actual configuration on your TV may be different, depending on your model.
SP42Q2HL
SP47Q2HL
SP52Q2HL
SP43Q5HL1X
SP47Q5HL1X
SP54T8HL
Œ
´
POWER
ˆ
Ø
MENU
Press to see an on-screen menu of your TV's features.
Press to turn the TV on and off.
Stand-By Indicator
Lights up when you turn the power off.
- Power Off ; Red
+
VOL –
Press to lower or raise the volume and to select items
when using the on-screen menu.
CH
- Power On ; Off
- Timer On ; Green
∏
”
Press to change channels and move between items on
the on-screen menu.
ˇ
¨
Remote Control Sensor
Aim the remote control towards this spot on the TV.
SOURCE
Press to switch between viewing TV programs and
signals from connected components.
(Enter)
While using the on-screen menus, press to activate (or
change) a particular item.
English - 6
Download from Www.Somanuals.com. All Manuals Search And Download.
YOUR NEW TV
Connection Jacks (Side or Front)
You can connect an A/V component that is used only occasionally, such as a camcorder or
video game. For information on connecting equipment, see page 16.
SP42Q2HL
SP47Q2HL
SP52Q2HL
SP54T8HL
SP43Q5HL1X
SP47Q5HL1X
Œ
´
ˇ
S-VIDEO Input
Connect an S-Video signal from a camcorder or video game.
VIDEO Input
Connect the video signal from a camcorder or video game.
AUDIO Input
Connect the audio signals from a camcorder or video game.
English - 7
Download from Www.Somanuals.com. All Manuals Search And Download.
YOUR NEW TV
Connection Jacks (Rear)
Use the rear panel jacks to connect an A/V component that will be connected continuously,
such as a VCR or a DVD player. For more information on connecting equipment, see pages
10~16.
Œ
´
Antenna terminal
Connect to an antenna or a cable TV system.
¨
ˆ
Audio Input jacks
Connect to the audio output jacks of VCRs, DVD
players and similar devices.
Audio/Video Output jacks
Connect to the audio/video input jacks of a
recording VCR.
COMPONENT Input jacks
(Y, PB, PR, AUDIO-L/R)
Connect to the audio and video outputs of DVD or
DTV Set-Top Box. 480i/480p/1080i Y,PB and PR video
signal outputs are available.
ˇ
Video Input jacks
Connect to the video output jacks of VCRs, DVD
players and similar devices
English - 8
Download from Www.Somanuals.com. All Manuals Search And Download.
YOUR NEW TV
Remote Control
You can use the remote control up to about 23 feet from the TV. When using the remote
control, always point it directly at the TV. You can also use your remote control to operate your
Set-Top box, VCR, Cable box or DVD player. See pages 52~53 for details.
Œ
´
ˇ
POWER
Turns the TV on and off.
˜
MODE
Selects a target device to be
controlled by this remote control
(i.e., TV, STB, VCR, CABLE or DVD).
P.SIZE
Press to change the picture size.
¯
˘
¿
PRE-CH
Tunes to the previous channel.
FAV. CH (Favorite Channel)
Press to switch between your
favorite channels.
CH , CH
Press to change channels.
¨
ˆ
Number buttons
Press to select channels directly
on the TV.
SOURCE
Each time the button is pressed, all
the inputs connected to the
external component jacks will be
shown in regular sequence.
+100
Press to select channels over 100.
For example, to select channel 121,
press the “+100”, then press the
“2” and “1”.
¸
INFO
Press to display information on the
TV screen.
Ø
∏
”
MUTE
Press to temporarily cut off the
sound.
˛
◊
EXIT
Press to exit the menu.
VOL +, VOL
-
œ/√/†/…
Control the cursor in the menu.
Press to increase or decrease the
volume.
ENTER
SLEEP
Press to select a preset time
interval for automatic shut off.
While using the on-screen menus,
press ENTER to activate (or
change) a particular item.
’
˝
MENU
Displays the main on-screen menu.
≠
–
S.MODE
Adjust the TV sound by selecting
one of the preset factory settings
(or select your personal,
customized sound settings).
STILL (Main picture)
Press to stop the action during a
particular scene. Press again to
resume normal video.
The still function doesn’t operate in
“Component1” or “Component2”
mode.
MTS (Multichannel Television
Sound)
Press to choose “Stereo”, “Mono”
or “SAP (Secondary Audio
Program)”.
Ô
P.MODE
Adjust the TV picture by selecting
one of the preset factory settings
(or select your personal,
customized picture settings).
—
÷
SELF FOCUS
Press to adjust for the optimum
picture set in the factory.
Ú
Æ
CAPTION
Press to view closed caption information.
VCR/DVD Controls
Controls VCR/DVD functions:
Rewind, Stop, Play/Pause, Fast
Forward.
Ò
BBE
SET
BBE is a built-in effect that adds
clarity, punch and dynamics to the
sound.
Used during set up of this remote control, so that
it will work compatibly with other devices (VCR,
STB, Cable box, DVD, etc.).
ADD/DEL
ı
RESET
Press to add or erase channels in
the TV’s memory. Use to memorize
or erase the fine tuning after fine
tuning channels.
If your remote control is not functioning properly,
take out the batteries and press the RESET
button for about 2~3 seconds. Re-insert the
batteries and try using the remote control again.
English - 9
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter Two
INSTALLATION
Connecting VHF and UHF Antennas
If your antenna has a set of leads that look like this, see “Antennas
with 300-ohm Flat Twin Leads,” below.
If your antenna has one lead that looks like this, see “Antennas with
75-ohm Round Leads,” on next page.
If you have two antennas, see “Separate VHF and UHF Antennas,” on
next page.
Antennas with 300-ohm Flat Twin Leads
If you are using an off-air antenna (such as a roof antenna or “rabbit ears”) that has 300-ohm
twin flat leads, follow the directions below.
1
Place the wires from the twin
leads under the screws on the
300-75 ohm adapter (not
supplied). Use a screwdriver
to tighten the screws.
2
Plug the adapter into the “ANT
IN” terminal on the rear panel.
English - 10
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION
Antennas with 75-ohm Round Leads
Plug the antenna lead into the
“ANT IN” terminal on the rear
panel.
Separate VHF and UHF Antennas
If you have two separate antennas for your TV (one VHF and one UHF), you must combine
the two antenna signals before connecting the antennas to the TV. This procedure requires a an
optional combiner-adapter (available at most electronics shops).
1
Connect both antenna leads to
the combiner.
2
Plug the combiner into the
“ANT IN” terminal on the rear
panel.
English - 11
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION
Connecting Cable TV
You can connect different cable systems to your TV, including cable without a cable box, and
cable with a cable box that descrambles some or all channels.
Cable without a Cable Box
If you want to connect cable, and you do not need to use a cable box:
Plug the incoming cable into
the “ANT IN” terminal on the
rear panel.
Cable with a Cable box that Descrambles All Channels
œ This terminal might be
labeled “ANT OUT”, “VHF
OUT”, or simply “OUT”.
1
Find the cable that is
connected to the ANTENNA
OUT terminal on your cable
box.
2
Connect the other end of this
cable to the “ANT IN” terminal
on the rear panel.
English - 12
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION
Connecting to a Cable Box that Descrambles Some Channels
If your cable box descrambles only some channels (such as premium channels), follow the
instructions below. You will need a two-way splitter, an RF (A/B) switch, and four lengths of
coaxial cable. (These items are available at most electronics stores.)
œ This terminal might be
labeled “ANT IN”, “VHF IN”,
or simply “IN”.
1
Find and disconnect the cable
that is connected to the
ANTENNA IN terminal on your
cable box.
2
Connect this cable to a two-
way splitter. Connect a coaxial
cable between an OUTPUT
terminal on the splitter and the
IN terminal on the cable box.
Incoming Cable
Splitter
Cable Box
3
Connect a coaxial cable
between the ANTENNA OUT
terminal on the cable box and
the B-IN terminal on the A/B
switch.
RF (A/B)
Switch
4
Connect another cable
between the other OUT
terminal on the splitter and the
A-IN terminal on the RF (A/B)
switch.
5
Connect the last coaxial cable
between the OUT terminal on
the RF (A/B) switch and the
“ANT IN” terminal on the rear
panel.
After you’ve made this connection, set the A/B switch to the “A” position for normal viewing. Set the A/B
switch to the “B” position to view scrambled channels. (When you set the A/B switch to “B,” you will
need to tune your TV to the cable box’s output channel, which is usually channel 3 or 4.)
English - 13
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION
Connecting a VCR
These instructions assume that you have already connected your TV to an antenna or a cable
TV system (according to the instructions on pages 10~13). Skip step 1 if you have not yet
connected to an antenna or a cable system.
TV Rear Panel
1
Connect a coaxial cable between the “ANT IN”
terminal on the TV and the ANTENNA OUT terminal on
the VCR.
A coaxial cable is usually included with a VCR. (If
not, check your local electronics store).
2
Connect a set of audio cables between the “AV IN 1
(L, R)” (or “AV IN 2 (L, R)”) jacks on the TV and AUDIO
OUT jacks on the VCR.
3
If you have a mono VCR, connect L(mono) to VCR
audio out using only one audio cable.
1
2
3
Connect a video cable between the “AV IN 1 (VIDEO)”
(or “AV IN 2 (VIDEO)”) jack on the TV and the VIDEO
OUT jack on the VCR.
Follow the instructions in “Viewing a VCR or
Camcorder Tape” to view your VCR tape.
VCR Rear Panel
• Also, you can connect to “AV 3” on the side panel of TV.
Connecting a Second VCR to Record from the TV
Your TV can send out signals of its picture and sound to be recorded by a second VCR. To do
this, connect your second VCR as follows:
TV Rear Panel
1
Connect a set of audio cables between the “AV OUT
(L, R)” jacks on the TV and the AUDIO IN jacks on the
VCR.
(The VCR input jacks might be either on the front or
rear of the VCR.)
2
Connect a video cable between the “AV OUT (VIDEO)”
jack on the TV and the VIDEO IN jack on the VCR.
3
1
Refer to your VCR’s instructions for more information
about how to record using this kind of connection.
2
VCR Rear Panel
English - 14
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION
Connecting a DVD Player
The rear panel jacks on your TV make it easy to connect a DVD player to your TV.
B
Connecting to Y, P , P
R
1
Connect a set of audio cables between the
“COMPONENT IN 1 (L, R)” (or “COMPONENT IN 2
(L, R)”) jacks on the TV and the AUDIO OUT jacks
on the DVD player.
TV Rear Panel
DVD Player
2
2
Connect a set of video cables between the
“COMPONENT IN 1 (Y, PB, PR)” (or “COMPONENT
IN 2 (Y, PB, PR)”) jacks on the TV and the VIDEO
OUT (Y, PB, PR) jacks on the DVD player.
For an explanation of Component video, see your
DVD player’s owner’s instruction.
1
Connecting to Regular Audio and Video Jacks
1
Connect a set of audio cables between the “AV IN
TV Rear Panel
1 (L, R)” (or “AV IN 2 (L, R)”) jacks on the TV and
the AUDIO OUT jacks on the DVD player.
DVD Player
2
Connect a video cable between the “AV IN 1
(VIDEO)” (or “AV IN 2 (VIDEO)”) jack on the TV and
the VIDEO OUT jack on the DVD player.
1
2
• Also, you can connect to “AV 3” on the side panel of TV.
English - 15
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION
Connecting a Digital TV Set-Top Box
The rear panel jacks on your TV make it easy to connect a Set-Top Box to your TV.
B
Connecting to Y, P , P
R
1
Connect a set of audio cables between the
“COMPONENT IN 1 (L, R)” (or “COMPONENT IN 2
(L, R)”) jacks on the TV and the AUDIO OUT jacks
on the Set-Top Box.
TV Rear Panel
DTV Set-Top Box
2
2
Connect a set of video cables between the
“COMPONENT IN 1 (Y, PB, PR)” (or “COMPONENT
IN 2 (Y, PB, PR)”) jacks on the TV and the VIDEO
OUT (Y, PB, PR) jacks on the Set-Top Box.
For detailed information, refer to the Set-Top Box
instruction manual.
1
Connecting a Camcorder
The side panel jacks on your TV make it easy to connect a camcorder to your TV. They allow
you to view the camcorder tapes without using a VCR. (Also see “Viewing an External Signal
Source” on page 37.)
TV Side Panel (SP42Q2HL)
1
Locate the A/V output jacks on the camcorder. They are
usually found on the side or rear of the camcorder.
2
Connect a set of audio cables between the “AV 3 (L, R)”
jacks on the TV and the AUDIO OUT jacks on the camcorder.
If you have mono camcorder, connect L(mono) to
3
camcorder audio out using only one audio cable.
2
3
Connect a video cable between the “AV 3 (VIDEO)” (or
“S-VIDEO”) jack on the TV and the VIDEO OUT jacks on the
camcorder.
The audio-video cables shown here are usually included
with a Camcorder. (If not, check your local electronics
store.) If your camcorder is stereo, you need to connect a
set of two cables.
• This figure shows the Standard connector-jack panel. The actual configuration for your TV may be
different.
English - 16
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION
Installing Batteries in the Remote Control
1
Slide the back cover all the
way out to open the battery
compartment of the remote
control.
œ Make sure to match the “+”
and “–” ends of the batteries
with the diagram inside the
compartment.
2
Install two AAA size batteries.
œ Remove the batteries and store
them in a cool, dry place if
you won’t be using the remote
control for a long time.
3
Replace the cover.
(Assuming typical TV usage,
the batteries last for about one
year.)
• The remote control can be used up to about 23 feet from the TV.
English - 17
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter Three
OPERATION
Turning the TV On and Off
Press the POWER button on the remote control.
You can also use the POWER button on the front panel.
Plug & Play Feature
When the TV is initially powered On, basic customer settings proceed automatically and
subsequently as below.
œ Plug & Play feature doesn’t
work when in the A/V mode.
1
Plug & Play
Press the POWER button on the
remote control.
Start Plug & Play.
OK
The “Start Plug & Play.” is displayed.
Press the ENTER button to start.
Enter
Return
TV
Setup
2
Time
The “Language” menu is displayed.
Press the ENTER button to select
“Language”.
√
√
√
√
√
Plug & Play
Language : English
Self Focus
Press the … or † button to select
the appropriate language, then press
the ENTER button.
Manual Convergence
▼
More
Move
Enter
Skip
TV
Channel
:
Auto Program
Favorite Channels
3
Air/CATV
Air
The “Air/CATV” menu is displayed.
Press the ENTER button to select
“Air/CATV”.
√
√
√
√
√
√
Fine Tune
Add/Delete
Name
00
œ
Press the … or † button to select
the video signal source, then press
the ENTER button.
----
Skip
œ
Move
Enter
English - 18
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATION
4
Plug & Play
Check antenna input.
The “Check antenna input” is
displayed.
Make sure that the antenna is
connected to the TV.
Start
Enter
Skip
Press the ENTER button to start the
auto program.
The “Auto Program” menu is
displayed.
The TV begins memorizing all of the
available stations.
œ For details, see page 27.
Plug & Play
Auto Program
Air 11
Skip
Stop
Enter
œ For details, see page 36.
TV
Time
--:--am
5
Clock
When it has finished, the “Time”
menu is displayed.
Set the clock.
√
On Timer
Off Timer
Sleep Timer
:
:
:
Off
Off
Off
√
√
√
Move
Enter
Skip
6
When you have finished, press the
MENU button.
Plug & Play
Enjoy your watching.
OK
The message “Enjoy your watching.”
is displayed.
TV
Setup
7
Time
If you want to reset this feature:
Press the MENU button.
Press the … or † button to select
“Setup”, then press the ENTER
button.
√
√
√
√
√
Plug & Play
Language : English
Self Focus
Manual Convergence
▼
More
Press the … or † button to select
“Plug & Play”, then press the ENTER
button.
Move
Enter
Return
The message “Start Plug & Play.” is
displayed.
English - 19
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATION
Viewing the Menus and On-Screen Displays
Viewing the Menus
TV
Input
Source List
1
Press the MENU button.
The main menu is displayed.
There are five menu groups: “Input”,
“Picture”, “Sound”, “Channel” and
“Setup”.
√
√
Edit Name
Move
Enter
Exit
œ You can also use the MENU,
TV
Input
+
-
CH
/
, VOL / and
2
(ENTER) buttons on the
control panel of the TV to
make selections.
Source List
Edit Name
Press the … or † button to move to
an item you want in the menu.
Press the œ or √ button to display,
change or use the selected items.
Press the ENTER button to enter
items in the menu.
√
√
Move
Enter
Return
3
Press the EXIT button to exit.
Viewing the Display
Press the INFO button on the remote
control.
The TV displays the current channel,
the status of certain picture and
sound settings and the current time.
Air 11
Picture:Dynamic
Sound :Custom
MTS
:Stereo
Signal :Mono
09:30 am
English - 20
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATION
Selecting a Menu Language
TV
Setup
1
Time
Press the MENU button.
Press the … or † button to select
“Setup”, then press the ENTER
button.
√
√
√
√
√
Plug & Play
Language : English
Self Focus
Manual Convergence
▼
More
Move
Enter
Return
TV
Setup
2
Time
Plug & Play
Press the … or † button to select
“Language”, then press the ENTER
button.
English
Language :
Español
Français
Manual Convergence
More
Self Focus
Press the … or † button to select
the appropriate language, then press
the ENTER button.
▼
Move
Enter
Return
Press the EXIT button to exit.
English - 21
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATION
Adjusting the Screen Automatically (Self Focus)
The “Self Focus” feature automatically finds the optimum picture quality when blurring,
overlapping colors or incorrect focus occurs. These conditions may be caused by moving your
TV.
TV
Setup
1
Time
Press the MENU button.
Press the … or † button to select
“Setup”, then press the ENTER
button.
√
√
√
√
√
Plug & Play
Language : English
Self Focus
Manual Convergence
▼
More
Move
Enter
Return
œ During the process, minor
distortions of the picture may
occur. At this time, the colors
may diffuse and a searching
pattern will appear on the
edges of the screen. This is a
normal part of the
TV
Self Focus
2
Self Focus
Auto
Press the … or † button to select
“Self Focus”, then press the ENTER
button.
√
√
√
: On
Message Display : On
The “Self Focus” is selected.
adjustment.
Press the ENTER button again.
The self focus process begins with
the message “Self Focus” and
horizontal bar is displayed.
Move
Enter
Return
Self Focus
When it is finished, all of things will
disappear and the optimum picture
quality can be enjoyed.
Press the EXIT button to exit.
Alternate method:
Self Focus
Simply press the SELF FOCUS button
on the remote control to enjoy the
optimum picture quality.
• Changing channels and any other signal changes will pause the self focus until a stable signal has
returned. It resumes after the signal has been stabilized. This feature will not work without a signal.
• Ambient light that is too bright may affect the self focus. If this occurs, darken the environment and
try again.
English - 22
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATION
Deactivating the Automatic Execution of the Self Focus
The “Self Focus” feature starts on default. It will automatically begin 10 minutes after switching
on the power and the appearance of the screen image. To set the optimum picture quality, the
“Self Focus” will automatically begin again after another 30 minutes, as the screen image is
then fully stabilized.
TV
Setup
1
Time
Press the MENU button.
Press the … or † button to select
“Setup”, then press the ENTER
button.
√
√
√
√
√
Plug & Play
Language : English
Self Focus
Manual Convergence
▼
More
Move
Enter
Return
TV
Self Focus
2
Self Focus
Auto
Press the … or † button to select
“Self Focus”, then press the ENTER
button.
:
Off
Message Display :
On
Press the … or † button to select
“Auto”, then press the ENTER
button.
Move
Enter
Return
To turn off the automatic execution
of the self focus feature, select “Off”
by pressing the … or † button, then
press the ENTER button.
Removing the “Self Focus” Message from the Display
TV
Self Focus
Self Focus
3
Press the … or † button to select
“Message Display”, then press the
ENTER button.
Auto
: On
Message Display : Off
On
To remove the message “Self Focus”
and horizontal bar on the screen
during the self focus process, select
“Off” by pressing the … or †
button, then press the ENTER button.
Move
Enter
Return
Press the EXIT button to exit.
English - 23
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATION
Adjusting Convergence Manually
If the color appears spread out or “smeared” on the screen, the convergence probably needs
alignment. Be sure to use the remote control for the convergence adjustments.
First steps:
TV
Setup
1
Time
Press the MENU button.
Press the … or † button to select
“Setup”, then press the ENTER
button.
√
√
√
√
√
Plug & Play
Language : English
Self Focus
Manual Convergence
▼
More
Move
Enter
Return
TV
Setup
2
Time
Plug & Play
Language : English
Self Focus
Press the … or † button to select
“Manual Convergence”, press the
ENTER button.
√
√
√
√
√
Manual Convergence
Press the ▲ or ▼ button to select
“Red” or “Blue”.
▼
More
Move
TV
Enter
Return
Manual convergence
Red
Blue
Reset
√
√
Move
Enter
Return
continued...
English - 24
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATION
3
Press the ENTER button.
Red
A crosshatch pattern will appear
on the screen.
Move the cursor to the position
you want to adjust by pressing the
▲/▼/œ/√ buttons, then press the
ENTER button.
Please, use remote control.
œ
√
Move
Enter
Return
Adjust the convergence by
pressing the ▲/▼/œ/√ buttons,
then press the ENTER button.
Red
Please, use remote control.
√
Adjust Enter Return
œ
4
If a horizontal line is visible, use the
▲ or ▼ button to move the line so
that it is superimposed on the
horizontal center-line (i.e., make a
single horizontal line that is as white
as possible.).
Red
Please, use remote control.
√
Adjust Enter Return
œ
5
If a vertical red is visible, use the
œ or √ button to move the line so
that it is superimposed on the
vertical-center line (i.e., make a
single vertical line that is as white as
possible.)
Red
Please, use remote control.
√
Adjust Enter Return
œ
After the convergence is correctly
adjusted, press the MENU button to
exit.
TV
Manual convergence
6
Red
Blue
Reset
To return to the factory defaults,
select “Reset” by pressing the
▲ or ▼ button, then press the
ENTER button.
√
√
The previously adjusted
convergence will be reset to the
factory defaults.
Move
Enter
Return
English - 25
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATION
Memorizing the Channels
Your TV can memorize and store all of the available channels for both “off-air” (antenna) and
cable channels. After the available channels are memorized, use the CH and CH buttons
to scan through the channels. This eliminates the need to change channels by entering the
channel digits.
Selecting the Video Signal Source
Before your TV can begin memorizing the available channels, you must specify the type of
signal source that is connected to the TV (i.e., an antenna or a cable system).
TV
Channel
:
Auto Program
Favorite Channels
1
Air/CATV
Air
Press the MENU button.
Press the … or † button to select
“Channel”, then press the ENTER
button.
√
√
√
√
√
√
Fine Tune
Add/Delete
Name
00
œ
----
Return
œ
Move
Enter
œ If you are connected to an
antenna, press the … or †
button to select “Air”.
TV
Channel
:
Auto Program
Favorite ChanneHRC
2
Air/CATV
Air
STD
Press the ENTER button to select
“Air/CATV”.
œ If you connected cable, press
the … or † button to select
the type of cable system:
IRC
Fine Tune
Add/Delete
Name
œ
Press the … or † button to select
“Air”, “STD”, “HRC” or “IRC”, then
press the ENTER button.
----
Return
œ
“STD”, “HRC” or “IRC”.
Move
Enter
Press the EXIT button to exit.
• “STD”, “HRC” and “IRC” identify various types of cable TV systems. Contact your local cable
company to identify the type of cable system that exists in your particular area. At this point the
signal source has been selected. Proceed to “Storing Channels in Memory”.
• Subscription cable services require service-specific requirement for viewing.
English - 26
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATION
Storing Channels in Memory (Automatic Method)
First, select the correct signal source (“Air”, “STD”, “HRC” or “IRC”) as described on the
previous page.
TV
Channel
:
Auto Program
Favorite Channels
1
Air/CATV
Air
Press the MENU button.
Press the … or † button to select
“Channel”, then press the ENTER
button.
√
√
√
√
√
√
Fine Tune
Add/Delete
Name
00
œ
----
Return
œ
Move
Enter
Auto Program
Start
2
Press the … or † button to select
“Auto Program”, then press the
ENTER button.
Enter
Return
Press the ENTER button to start the
auto program.
The TV begins memorizing all of the
available stations.
Press the ENTER button at any time
to interrupt the memorization
process.
Auto Program
Stop
Air 11
Enter
Return
Press the EXIT button to exit.
English - 27
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATION
Adding and Erasing Channels
To add channels that were not memorized (or to delete unwanted channels from memory):
TV
Channel
:
Auto Program
Favorite Channels
1
Air/CATV
Air
Press the MENU button.
Press the … or † button to select
“Channel”, then press the ENTER
button.
√
√
√
√
√
√
Fine Tune
Add/Delete
Name
00
œ
----
Return
œ
Move
Enter
Add/Delete
2
Press the … or † button to select
“Add/Delete”, then press the ENTER
button.
Air 11 Not in Memory
Add
CH Change
Enter
Return
Repeatedly pressing the ENTER
button will alternate between add
channel and delete channel.
Press the CH or CH button (or
number buttons) to switch to the
appropriate channel, then repeat
above.
Add/Delete
Air 11 In Memory
Delete
CH Change
Enter
Return
Press the EXIT button to exit.
Alternate method:
Add/Delete
Simply press the ADD/DEL button on
the remote control to add channels
that were not memorized or to delete
unwanted channels from memory.
Air 11 Not in Memory
Add
CH Change
Enter
Exit
English - 28
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATION
Changing Channels
Using the Channel Buttons
Press the CH or CH button to change channel.
When you press the CH or CH button, the TV changes channels in sequence. You will
see all the channels that the TV has memorized. (The TV must have memorized at least three
channels.) You will not see channels that were either erased or not memorized.
Using the Number Buttons
Use the number buttons to quickly tune to any channel.
Press the number buttons to go directly to a channel.
For example, to select channel “27”, press the “2”, then “7”. The TV will
change channels when you press the second number.
When you use the number buttons, you can directly select channels that were either erased or
not memorized.
To select a channel over 100, press the +100 button. (For channel “122”, press the +100
button, then “2”, then “2”.)
To change to single-digit channels (0–9) faster, press the “0” before the single digit.
(For channel “4”, press the “0”, then “4”.)
Using the Previous Channel
Press the PRE-CH button.
The TV changes to the last channel
you were watching.
English - 29
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATION
Selecting Your Favorite Channels
You can store your favorite channels for each available input source (such as TV and CATV).
This allows you to quickly and easily find frequently watched channels by pressing the
FAV.CH button on the remote control.
To Store Your Favorite Channels:
TV
Channel
:
Auto Program
Favorite Channels
1
Air/CATV
Air
Press the MENU button.
Press the … or † button to select
“Channel”, then press the ENTER
button.
√
√
√
√
√
√
Fine Tune
Add/Delete
Name
00
œ
----
Return
œ
Move
Enter
œ Only memorized channels
can be set as Favorite
channels.
TV
Favorite Channels
2
…
Press the … or † button to select
“Favorite Channels”, then press the
ENTER button.
Air
Air
Air
Air
Air
6
7
9
V
V
11
13
Press the … or † button to select a
channel, then press the ENTER
button.
†
Move
Enter
Return
Press the ENTER button again to
deselect the selected channel.
Press the EXIT button to exit.
To View Your Favorite Channels:
Press the FAV.CH button repeatedly
to jump from one favorite channel to
another.
English - 30
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATION
Labeling the Channels
Use this feature to assign an easy-to-remember label to any channel (i.e., “CBS”, “ESPN”,
“PBS2”, CNN1”, etc.) A label consists of five fields, where each field is a letter, a number or a
blank. When the INFO button is pressed, the channel label will appear next to the channel
number.
1
Press the CH or CH button to tune to the channel that will be
labeled.
TV
Channel
:
Auto Program
Favorite Channels
2
Air/CATV
Air
Press the MENU button.
Press the … or † button to select
“Channel”, then press the ENTER
button.
√
√
√
√
√
√
Fine Tune
Add/Delete
Name
00
œ
----
Return
œ
Move
Enter
œ If you add or delete the TV
channel, the labeled channels
list will also be added or
deleted.
TV
Channel
:
Auto Program
Favorite Channels
3
Air/CATV
Air
Press the … or † button to select
√
√
√
√
√
√
“Name”.
Fine Tune
Add/Delete
Name
00
œ
Press the œ or √ button to select a
field.
Press the … or † button to select a
letter, a number or a blank. (Results
in this sequence: A...Z, ✽, blank,
…
A
œ
†
Move
Adjust
Return
0...9,
-).
Press the EXIT button to exit.
English - 31
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATION
Picture Control
You can use the on-screen menus to change the “Contrast”, “Brightness”, “Sharpness”, “Color”
and “Tint” according to personal preference. (Alternatively, you can use one of the automatic
settings. See next page.)
Customizing the Picture
TV
Picture
: Dynamic
1
Mode
Custom
Size
Press the MENU button.
Press the … or † button to select
“Picture”, then press the ENTER
button.
√
√
√
√
√
:
16:9
On
Digital NR :
Color Tone : Normal
Move
Enter
Return
TV
Custom
2
Contrast
Brightness
Sharpness
Color
100
45
75
Press the … or † button to select
“Custom”, then press the ENTER
button.
√
√
√
√
√
œ
œ
œ
œ
œ
55
Tint
G 50 R 50
Move
Adjust
Return
3
Press the … or † button to select a
particular item, then press the
ENTER button.
Contrast
Move
100
Press the œ or √ button to increase
or decrease the value of a particular
item.
Adjust
Return
Press the EXIT button to exit.
English - 32
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATION
Using Automatic Picture Settings
Your TV has automatic picture settings (“Dynamic”, “Standard” and “Movie”) that are preset at
the factory. You can activate either “Dynamic”, “Standard” or “Movie” by pressing the P.MODE
button (or by making a selection from the menu). Or, you can select “Custom” which
automatically recalls your personalized picture settings.
TV
Picture
: Dynamic
1
Mode
Custom
Size
Press the MENU button.
Press the … or † button to select
“Picture”, then press the ENTER
button.
√
√
√
√
√
:
16:9
On
Digital NR :
Color Tone : Normal
Move
Enter
Return
TV
Picture
2
Mode
Custom
Size
: Dynamic
Standard
:
Press the ENTER button to select
“Mode”.
Movie
Custom
Color Tone : Normal
Digital NR :
Press the … or † button to select a
particular item, then press the
ENTER button.
Move
Enter
Return
Press the EXIT button to exit.
Alternate method:
Press the P.MODE button on the
remote control repeatedly to select
one of the standard picture settings.
Dynamic
• Choose Dynamic for viewing the TV during the day or when there is a bright light in the room.
• Choose Standard for the standard factory settings.
• Choose Movie when viewing a movie.
• Choose Custom if you want to adjust the settings according to personal preference (see previous page).
English - 33
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATION
Sound Control
Adjusting the Volume
Press the VOL + or VOL - buttons to increase or decrease the volume.
Using the MUTE Button
At any time, you can temporarily cut off the sound by using the MUTE button.
1
Press the MUTE button on the
remote control.
The message “Mute” is displayed
and the sound cuts off.
Mute
2
To turn mute off press the MUTE
button again or, press either the
-
+
VOL or VOL button.
Customizing the Sound
The sound settings can be adjusted to suit your personal preference. (Alternatively, you can use
one of the automatic settings. See next page.)
TV
Sound
1
Mode
Equalizer
MTS
:
Custom
Press the MENU button.
Press the … or † button to select
“Sound”, then press the ENTER
button.
√
√
√
√
√
√
:
Stereo
Off
Auto Volume :
Melody
BBE
:
:
On
Off
Move
Enter
Return
TV
Equalizer
2
Press the … or † button to select
“Equalizer”, then press the ENTER
button.
R
L
Press the œ or √ button to select a
particular item to be changed.
Press the ▲ or ▼ button to increase
or decrease the value of a particular
item.
100 300
Adjust
1K
3K
10K
Move
Return
Press the EXIT button to exit.
English - 34
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATION
Using Automatic Sound Settings
Your TV has automatic sound settings (“Standard”, “Music”, “Movie” and “Speech”) that are
preset at the factory. You can activate these sound settings by pressing the S.MODE button (or
by making a selection from the menu), or you can select “Custom”, which automatically recalls
your personalized sound settings.
TV
Sound
1
Mode
Equalizer
MTS
:
Custom
Press the MENU button.
Press the … or † button to select
“Sound”, then press the ENTER
button.
√
√
√
√
√
√
:
Stereo
Off
Auto Volume :
Melody
BBE
:
:
On
Off
Move
Enter
Return
TV
Sound
2
Mode
Equalizer
MTS
:
Standard
Music
Press the ENTER button to select
“Mode”.
:
Movie
Speech
Auto Volume :
Press the … or † button to select a
particular item, then press the
ENTER button.
Custom
Melody
BBE
:
:
Off
Move
Enter
Return
Press the EXIT button to exit.
Alternate method:
Press the S.MODE button on the
remote control repeatedly to select
one of the standard sound settings.
Custom
• Choose Standard for the standard factory settings.
• Choose Music when watching music videos or concerts.
• Choose Movie when watching movies.
• Choose Speech when watching a show that is mostly dialogue (i.e., news).
• Choose Custom to recall your personalized settings.
English - 35
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATION
Setting the Clock
Setting the clock is necessary in order to use the various timer features of the TV. Also, you can
check the time while watching the TV. (Just press the INFO button.)
TV
Setup
1
Time
Press the MENU button.
Press the … or † button to select
“Setup”, then press the ENTER
button.
√
√
√
√
√
Plug & Play
Language : English
Self Focus
Manual Convergence
▼
More
Move
Enter
Return
TV
Time
--:--am
2
Clock
On Timer
Press the ENTER button to select
√
√
√
√
:
:
:
Off
Off
Off
“Time”.
Off Timer
Sleep Timer
Move
Enter
Return
œ The current time will appear
every time you press the
INFO button.
TV
Clock Set
3
Press the ENTER button to select
Hour: Minute
12:00am
“Clock”.
œ You can set the hour and
minute directly by pressing
the number buttons on the
remote control.
Press the œ or √ button to move to
“Hour”, “Minute” or “am”.
Set the clock you want by pressing
the … or † button, then press the
ENTER button.
Move
Adjust
Return
Press the EXIT button to exit.
English - 36
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATION
Viewing an External Signal Source
Use the remote control to switch between viewing signals from connected equipment, such as
VCR, DVD, Set-Top box and the TV source (broadcast or cable).
Setting the Signal Source
TV
Input
Source List
1
Press the MENU button.
Press the ENTER button to select
“Input”.
√
√
Edit Name
Move
Enter
Return
œ When you connect equipment
to the TV, you can choose
between the following sets of
jacks : “AV3”, “S-Video” on
the TV’s side panel or “AV1”,
“AV2”, “Component1” or
“Component2” on the TV’s
rear panel.
TV
Source List
2
TV
Press the ENTER button to select
AV1
-----
“Source List”.
AV2
AV3
-----
-----
-----
-----
-----
Press the … or † button to select a
signal source, then press the ENTER
button.
S-Video
Component1
Component2
Move
Enter
Return
Press the EXIT button to exit.
Alternate method:
AV1
Press the SOURCE button on the
remote control repeatedly to select
an external signal source.
English - 37
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATION
Assigning Names to External Sources
This feature enables you to name the input source you have connected.
TV
Input
Source List
1
Press the MENU button.
Press the ENTER button to select
“Input”.
√
√
Edit Name
Move
Enter
Return
TV
Edit Name
2
AV1
AV2
AV3
S-Video
:
:
:
:
-----
-----
-----
-----
Press the … or † button to select
“Edit Name”, then press the ENTER
button.
√
√
√
√
√
√
Component1: -----
Component2: -----
Move
Enter
Return
œ The device names available are
listed.
TV
Edit Name
3
-----
AV1
AV2
AV3
S-Video
:
:
:
:
- VCR
- DVD
- Cable STB
- HD STB
- Satellite STB
- AV Receiver
- DVD Receiver
- Game
Press the … or † button to select a
signal source, then press the ENTER
button.
VCR
DV
D
Cable STB
HD
TB
Satellite STB
S
A
V
R
ec
e
iver
Press the … or † button to select
an external device, then press the
ENTER button.
Component1: ---†--
Component2: -----
Move
Enter
Return
Press the EXIT button to exit.
- Camcorder
- DVD Combo
- DHR (DVD HDD Recorder)
- PC
English - 38
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter Four
SPECIAL FEATURES
Fine Tuning Channels
The Fine Tuning function lets you manually adjust the TV’s tuner if you have difficulty tuning
channels.
TV
Channel
:
Auto Program
Favorite Channels
1
Air/CATV
Air
Press the MENU button.
Press the … or † button to select
“Channel”, then press the ENTER
button.
√
√
√
√
√
√
Fine Tune
Add/Delete
Name
00
œ
----
Return
œ
Move
Enter
TV
Channel
:
Auto Program
Favorite Channels
2
Air/CATV
Air
Press the … or † button to select
√
√
√
√
√
√
“Fine Tune”.
Fine Tune
Add/Delete
Name
+01
œ
Press the œ or √ button to adjust
the fine tuning.
----
Return
œ
To store the fine tuning setting in the
TV’s memory, press the … button.
The symbol “✽” is displayed.
To reset the fine tuning to “00”,
press the † button.
Save/Reset
Adjust
Press the EXIT button to exit.
English - 39
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIAL FEATURES
Changing the Screen Size (Wide Model)
TV
Picture
: Dynamic
1
Mode
Custom
Size
Press the MENU button.
Press the … or † button to select
“Picture”, then press the ENTER
button.
√
√
√
√
√
:
16:9
On
Digital NR :
Color Tone : Normal
Move
Enter
Return
œ In the “Zoom 1” and “Zoom 2”
mode, lifting is available by
pressing the … or † button.
TV
Size
2
16:9
Press the … or † button to select
“Size”, then press the ENTER button.
Panorama
Zoom1
œ Captions or subtitles might be
interrupted in the “Cinema1”
and “Cinema2” modes.
Zoom2
4:3
Cinema1
Cinema2
Press the … or † button to select
the screen format you want.
Move
Enter
Return
Press the EXIT button to exit.
Alternate method:
Press the P.SIZE button on the remote control repeatedly to select one of the screen format you want.
Viewing with a 4:3 signal (When a 4:3 signal is received)
16:9
Panorama
Zoom1
Zoom2
Cinema2
Cinema1
4:3
Viewing with a 16:9 signal (When a 16:9 signal is received)
The illustrations below show the change of picture while viewing a DVD title.
16:9
Panorama
Zoom1
Zoom2
Cinema2
Cinema1
4:3
English - 40
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIAL FEATURES
Changing the Screen Size (4:3 Model)
TV
Picture
: Dynamic
1
Mode
Custom
Size
Press the MENU button.
Press the … or † button to select
“Picture”, then press the ENTER
button.
√
√
√
√
√
: Normal
On
Color Tone : Normal
Digital NR :
Move
Enter
Return
œ In the “Zoom 1” and “Zoom 2”
mode, lifting is available by
pressing the … or † button.
TV
Size
2
Normal
Zoom1
Zoom2
Cinema
Press the … or † button to select
“Size”, then press the ENTER button.
œ Captions or subtitles might be
interrupted in the “Cinema”
modes.
Press the … or † button to select
the screen format you want.
Move
Enter
Return
Press the EXIT button to exit.
Alternate method:
Press the P.SIZE button on the remote control repeatedly to select one of the screen format you want.
Viewing with a 4:3 signal (When a 4:3 signal is received)
Normal
Zoom1
Zoom2
Cinema
Viewing with a 16:9 signal (When a 16:9 signal is received)
The illustrations below show the change of picture while viewing a DVD title.
Normal
Zoom1
Zoom2
Cinema
English - 41
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIAL FEATURES
Digital Noise Reduction
If the broadcast signal received by your TV is weak, you can activate this feature to help reduce
any static and ghosting that may appear on the screen.
TV
Picture
: Dynamic
1
Mode
Custom
Size
Press the MENU button.
Press the … or † button to select
“Picture”, then press the ENTER
button.
√
√
√
√
√
:
16:9
On
Digital NR :
Color Tone : Normal
Move
Enter
Return
TV
Picture
: Dynamic
2
Mode
Custom
Size
Press the … or † button to select
“Digital NR”, then press the ENTER
button.
:
16:9
Off
Digital NR :
Press the … or † button to select
“Off” or “On”, then press the ENTER
button.
Color Tone : On
Move
Enter
Return
Press the EXIT button to exit.
English - 42
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIAL FEATURES
Selecting the Color Tone
TV
Picture
: Dynamic
1
Mode
Custom
Size
Press the MENU button.
Press the … or † button to select
“Picture”, then press the ENTER
button.
√
√
√
√
√
:
16:9
On
Digital NR :
Color Tone : Normal
Move
Enter
Return
2
Press the … or † button to select
“Color Tone”, then press the ENTER
button.
Press the œ or √ button to increase
or decrease the value of the color
tone (“Warm 10~1”, “Normal”, and
“Cool 1~10”).
Color Tone
Normal
Press the EXIT button to exit.
English - 43
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIAL FEATURES
Setting the Blue Screen Mode
If no signal is being received or the signal is very weak, a blue screen automatically replaces the
noisy picture background. If you wish to continue viewing the poor picture, you must set the
“Blue Screen” mode to “Off”.
TV
Setup
1
Time
Press the MENU button.
Press the … or † button to select
“Setup”, then press the ENTER
button.
√
√
√
√
√
Plug & Play
Language : English
Self Focus
Manual Convergence
▼
More
Move
Enter
Return
TV
Setup
2
…
More
Press the … or † button to select
“Blue Screen”, then press the
ENTER button.
Caption
Blue Screen :
Off
On
Press the … or † button to select
“Off” or “On”, then press the ENTER
button.
Move
Enter
Return
Press the EXIT button to exit.
Freezing the Picture
œ The still function doesn’t
operate in “Component1” or
“Component2” mode.
Press the STILL button to freeze a
moving picture.
(Normal sound will still be heard.)
Press again to cancel.
English - 44
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIAL FEATURES
Choosing a Multi-Channel Sound (MTS) track
Depending on the particular program being broadcast, you can listen to “Mono”, “Stereo” or
“SAP (Secondary Audio Program)”. “SAP” audio is usually a foreign-language translation.
Sometimes “SAP” has unrelated information like news or weather.
TV
Sound
1
Mode
Equalizer
MTS
:
Custom
Press the MENU button.
Press the … or † button to select
“Sound”, then press the ENTER
button.
√
√
√
√
√
√
:
Stereo
Off
Auto Volume :
Melody
BBE
:
:
On
Off
Move
Enter
Return
TV
Sound
2
Mode
Equalizer
MTS
:
Custom
Press the … or † button to select
“MTS”, then press the ENTER
button.
:
Mono
Auto Volume Stereo
Press the … or † button to select a
setting you want, then press the
ENTER button.
Melody
BBE
SAP
:
Off
Move
Enter
Return
Press the EXIT button to exit.
Alternate method:
Press the MTS button on the remote
control repeatedly to select one of
the settings.
MTS
:Stereo
Signal :Mono
• Choose Mono for channels that are broadcasting in mono, or if you are having difficulty receiving a
stereo signal.
• Choose Stereo for channels that are broadcasting in stereo.
• Choose SAP to listen to the Separate Audio Program, which is usually a foreign-language translation.
English - 45
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIAL FEATURES
Auto Volume
Each broadcasting station has its own signal conditions, and it is inconvenient to adjust the
volume every time the channel is changed. “Auto Volume” automatically adjusts the volume of
the desired channel by lowering the sound output when the modulation signal is high or by
raising the sound output when the modulation signal is low.
TV
Sound
1
Mode
Equalizer
MTS
:
Custom
Press the MENU button.
Press the … or † button to select
“Sound”, then press the ENTER
button.
√
√
√
√
√
√
:
Stereo
Off
Auto Volume :
Melody
BBE
:
:
On
Off
Move
Enter
Return
TV
Sound
2
Mode
Equalizer
MTS
:
Custom
Press the … or † button to select
“Auto Volume”, then press the
ENTER button.
:
Stereo
Auto Volume :
Off
On
Off
Press the … or † button to select
“Off” or “On”, then press the ENTER
button.
Melody
BBE
:
:
Move
Enter
Return
Press the EXIT button to exit.
Setting the On/Off Melody
A melody sound can be set to come on when the TV is powered On or Off.
TV
Sound
1
Mode
Equalizer
MTS
:
Custom
Press the MENU button.
Press the … or † button to select
“Sound”, then press the ENTER
button.
√
√
√
√
√
√
:
Stereo
Off
Auto Volume :
Melody
BBE
:
:
On
Off
Move
Enter
Return
TV
Sound
2
Mode
Equalizer
MTS
:
Custom
Press the … or † button to select
“Melody”, then press the ENTER
button.
:
Stereo
Auto Volume :
Off
Off
On
Press the … or † button to select
“Off” or “On”, then press the ENTER
button.
Melody
BBE
:
:
Move
Enter
Return
Press the EXIT button to exit.
English - 46
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIAL FEATURES
BBE
BBE is a built-in effect that adds clarity, punch and dynamics to the sound.
TV
Sound
1
Mode
Equalizer
MTS
:
Custom
Press the MENU button.
Press the … or † button to select
“Sound”, then press the ENTER
button.
√
√
√
√
√
√
:
Stereo
Off
Auto Volume :
Melody
BBE
:
:
On
Off
Move
Enter
Return
TV
Sound
2
Mode
Equalizer
MTS
:
Custom
Press the … or † button to select
“BBE”, then press the ENTER button.
Press the … or † button to select
“Off” or “On”, then press the ENTER
button.
:
Stereo
Auto Volume :
Off
Off
On
Melody
BBE
:
:
Move
Enter
Return
Press the EXIT button to exit.
Alternate method:
Press the BBE button on the remote
control repeatedly to select “On” or
“Off”.
BBE : Off
English - 47
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIAL FEATURES
Viewing Closed Caption Information
Your TV decodes and displays the closed captions information that is broadcast along with
some television shows. These captions are usually subtitles for the hearing impaired or
translations into other languages. All VCRs record the closed caption signal from television
programs, so pre-recorded video tapes can also deliver closed-caption information. Check for
CC
the closed caption symbol (
) on the tape’s package or your TV program-schedule.
TV
Setup
1
Time
Press the MENU button.
Press the … or † button to select
“Setup”, then press the ENTER
button.
√
√
√
√
√
Plug & Play
Language : English
Self Focus
Manual Convergence
▼
More
Move
Enter
Return
TV
Caption
Off
2
Caption
Mode
Channel
Field
:
Press the … or † button to select
“Caption”, then press the ENTER
button.
:
:
:
On
1
1
Press the ENTER button to select
“Caption”.
Press the … or † button to select
“On”, then press the ENTER button.
Move
Enter
Return
TV
Caption
Alternate method:
Press the CAPTION button on the
remote control to select “Off” or
Caption
Mode
Channel
Field
:
:
:
:
Off
Caption
√
√
√
√
“On”
.
1
1
Move
Enter
Return
œ In “Caption” mode, caption
appears at the bottom of the
screen, and they usually cover
only a small portion of the
picture.
TV
Caption
3
Caption
Mode
Channel
Field
:
:
:
:
On
Text
Caption
1
Press the … or † button to select
“Mode”, then press the ENTER
button.
Press the … or † button to select
“Text” or “Caption”, then press the
ENTER button.
œ In “Text” mode, information
unrelated to the program, such
as news or weather, is
Move
Enter
Return
displayed. Text often covers a
large portion of the screen.
English - 48
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIAL FEATURES
œ Depending on the particular
broadcast, it might be
TV
Caption
:
4
necessary to make changes to
“Channel” and “Field”.
Caption
Mode
Channel
Field
On
Press the … or † button to select
“Channel”, then press the ENTER
button.
:
:
:
Caption
2
1
œ Different channels and fields
display different information:
“Field 2” carries additional
information that supplements
the information in “Field 1”.
(For example, “Channel 1”
may have subtitles in English,
while “Channel 2” has subtitles
in Spanish.)
Press the … or † button to select
“2” or “1”, then press the ENTER
button.
Move
Enter
Return
TV
Caption
5
Caption
Mode
Channel
Field
:
:
:
:
On
Press the … or † button to select
“Field”, then press the ENTER
button.
Caption
1
2
1
Press the … or † button to select
“2” or “1”, then press the ENTER
button.
Move
Enter
Return
• Misspellings and unusual characters sometimes occur during closed caption transmissions, especially
those of live events. There may be a small delay before captions appear when you change channels.
These are not malfunctions of the TV.
English - 49
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIAL FEATURES
Setting the On/Off Timer
TV
Setup
1
Time
Press the MENU button.
Press the … or † button to select
“Setup”, then press the ENTER
button.
√
√
√
√
√
Plug & Play
Language : English
Self Focus
Manual Convergence
▼
More
Move
Enter
Return
œ The current time will appear
every time you press the
INFO button.
TV
On Timer
Hour:Minute Activation
2
Press the ENTER button to select
“Time”.
12:00am
No
œ You can set the hour and
minute directly by pressing
the number buttons on the
remote control.
Press the … or † button to select
“On Timer”, then press the ENTER
button.
Press the … or † button to adjust
“Hour”, then press the √ button to
move to the next step.
Set other items using the same
method as above.
Channel
3
Volume
10
Move
Adjust
Return
When finished, press the MENU
button to return.
œ Auto Power Off
TV
Off Timer
Hour:Minute Activation
When you set the timer “On”,
the television will eventually
turn off, if no controls are
operated for 3 hours after the
TV was turned on by timer.
This function is only available
in timer “On” mode and
prevents overheating or
3
Press the … or † button to select
“Off Timer”, then press the ENTER
button.
12:00am
No
Press the … or † button to adjust
“Hour”, then press the √ button to
move to the next step.
Set other items using the same
method as above.
Move
Adjust
Return
leakages, which may occur if a
TV is on for too long (on
holiday, for example).
Press the EXIT button to exit.
English - 50
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIAL FEATURES
Setting the Sleep Timer
The sleep timer automatically shuts off the TV after a preset time (from 30 to 180 minutes).
TV
Setup
1
Time
Press the MENU button.
Press the … or † button to select
“Setup”, then press the ENTER
button.
√
√
√
√
√
Plug & Play
Language : English
Self Focus
Manual Convergence
▼
More
Move
Enter
Return
TV
Time
--:--am
2
Press the ENTER button to select
“Time”.
Clock
On Timer
√
:
:
:
Off
Off Timer
Sleep Timer
Off
Press the … or † button to select
“Sleep Timer”, then press the ENTER
button.
Press the … or † button to select
the preset time you want, then press
the ENTER button.
30
60
90
120
150
180
Move
Enter
Return
Press the EXIT button to exit.
Alternate method:
Sleep Timer
Off
Press the SLEEP button on the
remote control repeatedly until the
appropriate time interval appears
(any of the preset values from “30”
to “180” minutes).
English - 51
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIAL FEATURES
Customizing Your Remote Control
Your TV comes equipped with a universal remote control. In addition to controlling the TV, the
universal remote control can also operate a VCR, Cable box, DVD and Set-Top Box made by
Samsung (even if your VCR, Cable box and DVD are made by manufacturers other than Samsung).
• The remote control might not be compatible with all VCRs, DVD players and Cable boxes.
Setting Up Your Remote Control to Operate Your VCR (Cable box or
DVD player)
1
Turn off your VCR (Cable box or DVD player).
œ The remote control has five
modes: TV, STB, VCR,
CABLE and DVD.
2
Press the MODE button to switch the remote control to the VCR (CABLE or
DVD) mode.
3
On your Samsung remote control, press the SET button.
œ Make sure you enter 3 digits
of the code, even if the first
digit is a “0”. (If more than
one code listed, try the first
one.)
4
Enter 3 digits of the VCR (Cable box or DVD player) code listed on next
page for your brand of VCR (Cable box or DVD player).
œ If your VCR (Cable box or
DVD player) does not turn
on, repeat steps 2, 3, and 4,
but try one of the other codes
listed for the brand of your
particular VCR (Cable box or
DVD player).
5
Press the POWER button on the remote control. Your VCR (Cable box or
DVD player) should turn on. If your VCR (Cable box or DVD player) turns
on, your remote control is now set correctly.
6
Once your remote control is set up, press the MODE button any time you
want to use the remote to operate your VCR (Cable box or DVD player).
• When your remote is in the TV mode, the VCR (or DVD player) control buttons (REW, STOP,
PLAY/PAUSE and FF) will still operate your VCR (or DVD player).
• When your remote control is in the STB, VCR, CABLE or DVD mode, the volume buttons still
control your TV’s volume.
English - 52
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIAL FEATURES
Remote Control Codes
VCR Codes
Cable Box Codes
DVD Codes
English - 53
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter Five
TROUBLESHOOTING
If the TV seems to have a problem, first try this list of possible problems and solutions. If none
of these troubleshooting tips apply, then call your nearest service center.
Identifying Problems
Problem
Possible Solution
Poor picture.
Try another channel.
Adjust the antenna.
Check all wire connections.
Poor sound quality.
No picture or sound.
Try another channel.
Adjust the antenna.
Make sure the MUTE button is off.
Try another channel.
Press the SOURCE button.
Make sure the TV is plugged in.
Check the antenna connections.
No color, wrong colors or tints.
Picture rolls vertically.
Make sure the program is broadcast in color.
Adjust the picture settings.
Adjust the antenna.
Check all wire connections.
If you are using a VCR, check the tracking.
The TV operates erratically.
Unplug the TV for 30 seconds, then try operating it
again.
Your remote control does not
operate your TV.
Press the MODE button to put your remote control in
the TV mode.
Make sure the remote has batteries.
The TV won’t turn on.
Make sure the wall outlet is working.
Make sure the remote has batteries.
English - 54
Download from Www.Somanuals.com. All Manuals Search And Download.
APPENDIX
Cleaning and Maintaining Your TV
With proper care, your TV unit will give you many years of service. Please follow these
guidelines to get the maximum performance from your TV.
Placement
• Do not place the TV near extremely hot, cold, humid or dusty places.
• Do not place the TV near appliances with electric motors that create magnetic fields, such as
vacuum cleaners.
• Keep the ventilation openings clear; do not place the TV on a soft surface, such as cloth or paper.
• Place the TV in a vertical position only.
Liquids
• Do not handle liquids near or on the TV. Liquids that spill into it can cause serious damage.
Cabinet
• Never open the cabinet or touch the parts inside.
• Wipe your TV with a clean, dry cloth. Never use water, cleaning fluids, wax, or chemicals.
• Do not put heavy objects on top of the cabinet.
Temperature
• If your TV is suddenly moved from a cold to a warm place, unplug the power cord, and allow at
least two hours for moisture that may have formed inside the unit to dry completely.
Using Your TV in Another Country
If you plan to take your TV with you to a foreign country, please be aware of the different
television systems that are in use around the world. A TV designed for one system may not
work properly with another system due to differences in the TV channel frequencies.
Specifications
Model
Voltage
Frequency of Operation Power Consumption
Dimension (W x D x H)
Weight
1004 x 500 x 967 mm
SP42Q2HL
AC 100-240V
60Hz
60Hz
60Hz
60Hz
60Hz
60Hz
240 watts
240 watts
240 watts
240 watts
240 watts
240 watts
40.4 Kg / 89.1 lbs
39.5 x 19.7 x 38.1 inches
1126 x 621 x 984 mm
SP47Q2HL
SP52Q2HL
SP54T8HL
AC 100-240V
AC 100-240V
AC 100-240V
AC 100-240V
AC 100-240V
49.0 Kg / 108.0 lbs
56.3 Kg / 124.1 lbs
76.0 Kg / 167.5 lbs
36.4 Kg / 80.2 lbs
39.5 Kg / 87.0 lbs
44.3 x 24.4 x 38.7 inches
1226 x 598 x 1276 mm
48.3 x 23.5 x 50.2 inches
1525 x 635 x 1162 mm
60.0 x 25.0 x 45.7 inches
1035 x 510 x 888 mm
SP43Q5HL1X
SP43Q5HL1X
40.7 x 20.0 x 34.9 inches
1120 x 555 x 939 mm
44.0 x 21.8x 36.9 inches
English - 55
Download from Www.Somanuals.com. All Manuals Search And Download.
BP68-00500A-00
Download from Www.Somanuals.com. All Manuals Search And Download.
|