Download from Www.Somanuals.com. All Manuals Search And Download.
This manual is provided for information purposes only. All information included herein is subject to change without notice. Samsung Electronics is not
responsible for any direct or indirect damages, arising from or related to use of this manual.
© 2006 Samsung Electronics Co., Ltd. All rights reserved.
• ML-4550, ML-4551N, and ML-4551ND are trademarks of Samsung Electronics Co., Ltd.
• Samsung and Samsung logo are trademarks of Samsung Electronics Co., Ltd.
• Centronics is a trademark of Centronics Data Computer Corporation.
• IBM and IBM PC are trademarks of International Business Machines Corporation.
• PCL and PCL 6 are trademarks of Hewlett-Packard company.
• Microsoft, Windows, Windows 98, Windows Me, Windows 2000, Windows NT 4.0, Windows XP, and Windows 2003 are registered trademarks of
Microsoft Corporation.
• PostScript 3 is a trademark of Adobe System, Inc.
• UFST® and MicroType™ are registered trademarks of Monotype Imaging Inc.
• TrueType, LaserWriter, and Macintosh are trademarks of Apple Computer, Inc.
• All other brand or product names are trademarks of their respective companies or organizations.
Download from Www.Somanuals.com. All Manuals Search And Download.
contact SAMSUNG worldwide
If you have any comments or questions regarding Samsung products, contact the Samsung customer care center.
COUNTRY
INDONESIA
ITALIA
CUSTOMER CARE CENTER
WEB SITE
COUNTRY
ARGENTINE
AUSTRALIA
AUSTRIA
BELGIUM
CUSTOMER CARE CENTER
0800-333-3733
WEB SITE
0800-112-8888
www.samsung.com
www.samsung.com
www.samsung.com/latin
www.samsung.com/jp
www.samsung.com/lv
www.samsung.com/lt
www.samsung.com/be
www.samsung.com/my
www.samsung.com
www.samsung.com/ar
www.samsung.com
www.samsung.com/at
www.samsung.com/be
www.samsung.com
800-SAMSUNG (726-7864)
1-800-234-7267
1300 362 603
JAMAICA
JAPAN
0800-SAMSUNG (726-7864)
0032 (0)2 201 24 18
0120-327-527
LATVIA
800-7267
BRAZIL
0800-124-421
4004-0000
LITHUANIA
LUXEMBURG
MALAYSIA
MEXICO
8-800-77777
CANADA
CHILE
1-800-SAMSUNG (726-7864)
800-SAMSUNG (726-7864 )
www.samsung.com/ca
www.samsung.com/cl
www.samsung.com.cn
0035 (0)2 261 03 710
1800-88-9999
CHINA
800-810-5858
01-800-SAMSUNG (726-
7864)
010- 6475 1880
NETHERLANDS
0900-SAMSUNG (726-7864 €
0,10/Min)
www.samsung.com/nl
www.samsung.com/nz
COLOMBIA
01-8000-112-112
0-800-507-7267
844 000 844
www.samsung.com/co
www.samsung.com/latin
www.samsung.com/cz
COSTA RICA
NEW ZEALAND
NICARAGUA
NORWAY
0800SAMSUNG (726-7864)
00-1800-5077267
815-56 480
CZECH
REPUBLIC
Distributor pro Českou republiku : Samsung Zrt., česka
organizační složka Vyskočilova 4, 14000 Praha 4
www.samsung.com/no
www.samsung.com/latin
www.samsung.com/ph
DENMARK
ECUADOR
EL SALVADOR
ESTONIA
70 70 19 70
www.samsung.com/dk
www.samsung.com/latin
www.samsung.com/latin
www.samsung.ee
PANAMA
800-7267
1-800-10-7267
800-6225
PHILIPPINES
1800-10-SAMSUNG (726-
7864)
POLAND
0 801 801 881
022-607-93-33
www.samsung.com/pl
800-7267
KAZAHSTAN
KYRGYZSTAN
FINLAND
8-10-800-500-55-500
00-800-500-55-500
030-6227 515
www.samsung.kz
PORTUGAL
80820-SAMSUNG (726-7864) www.samsung.com/pt
PUERTO RICO
1-800-682-3180
1-800-751-2676
www.samsung.com/latin
www.samsung.com/latin
www.samsung.com/fi
www.samsung.com
REP.
DOMINICA
FRANCE
3260 SAMSUNG 08 25 08 65
65 (€ 0,15/min)
EIRE
0818 717 100
www.samsung.com/ie
www.samsung.com
www.samsung.com/sg
www.samsung.com/sk
www.samsung.com
GERMANY
01805 - SAMSUNG (726-
7864 (€ 0,14/Min)
www.samsung.com
RUSSIA
8-800-555-55-55
SINGAPORE
SLOVAKIA
1800-SAMSUNG (726-7864)
0800-SAMSUNG (726-7864)
0860-SAMSUNG (726-7864 )
GUATEMALA
HONDURAS
HONG KONG
HUNGARY
INDIA
1-800-299-0013
800-7919267
www.samsung.com/latin
SOUTH
AFRICA
3698-4698
www.samsung.com/hk
www.samsung.com
www.samsung.com
06-80-SAMSUNG (726-7864)
SPAIN
902 10 11 30
0771-400 200
www.samsung.com
3030 8282
SWEDEN
www.samsung.com/se
1800 110011
Download from Www.Somanuals.com. All Manuals Search And Download.
COUNTRY
SWITZERLAND
TADJIKISTAN
TAIWAN
CUSTOMER CARE CENTER
0800-SAMSUNG (726-7864)
8-10-800-500-55-500
0800-329-999
WEB SITE
www.samsung.com/ch
www.samsung.com
THAILAND
1800-29-3232
02-689-3232
www.samsung.com/th
TRINIDAD &
TOBAGO
1-800-SAMSUNG (726-7864)
www.samsung.com/latin
TURKEY
U.A.E
444 77 11
www.samsung.com
www.samsung.com
800-SAMSUNG (726-7864)
8000-4726
U.K
0845 SAMSUNG (726-7864)
1-800-SAMSUNG (726-7864)
8-800-502-0000
www.samsung.com
www.samsung.com/us
www.samsung.com
U.S.A.
UKRAINE
UZBEKISTAN
VENEZUELA
VIETNAM
8-10-800-500-55-500
0-800-100-5303
www.samsung.com.uz
www.samsung.com/latin
www.samsung.com
1 800 588 889
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTENTS
Special features ...................................................................................................................................................... 1.1
Printer overview ...................................................................................................................................................... 1.3
Finding more information ........................................................................................................................................ 1.4
Menu overview ........................................................................................................................................................ 2.2
Printing a demo page .............................................................................................................................................. 2.8
Using toner save mode ........................................................................................................................................... 2.8
Changing the font setting ........................................................................................................................................ 2.8
System requirements .............................................................................................................................................. 3.2
Supported operating systems ................................................................................................................................. 4.2
Configuring TCP/IP ................................................................................................................................................. 4.2
Configuring EtherTalk ............................................................................................................................................. 4.2
Configuring IPX frame types ................................................................................................................................... 4.3
Restoring the network configuration ........................................................................................................................ 4.3
Loading paper ......................................................................................................................................................... 5.4
Printing a document ................................................................................................................................................ 6.1
Canceling a print job ............................................................................................................................................... 6.1
How to purchase ..................................................................................................................................................... 7.1
Printing information pages ...................................................................................................................................... 8.1
Maintaining the toner cartridge ................................................................................................................................ 8.3
Download from Www.Somanuals.com. All Manuals Search And Download.
Understanding the status LED ................................................................................................................................ 9.6
Understanding display messages ........................................................................................................................... 9.6
Toner cartridge-related messages .......................................................................................................................... 9.8
Solving print quality problems ............................................................................................................................... 9.11
Common Windows problems ................................................................................................................................ 9.13
Common PostScript problems .............................................................................................................................. 9.13
Common Linux problems ...................................................................................................................................... 9.14
Common Macintosh problems .............................................................................................................................. 9.14
Precautions when installing accessories ............................................................................................................... 10.1
Using the hard disk ............................................................................................................................................... 10.4
Download from Www.Somanuals.com. All Manuals Search And Download.
17 The Power cord supplied with your machine should be used for safe operation. If
you are using a cord which is longer than 2 m with 110 V machine, then it should
Important Precautions and Safety Information
When using this machine, these basic safety precautions should always be followed to
reduce risk of fire, electric shock, and injury to people:
be 16 AWG1 or bigger.
18 SAVE THESE INSTRUCTIONS.
1
2
3
Read and understand all instructions.
Use common sense whenever operating electrical appliances.
Environmental and Safety Consideration
Follow all warnings and instructions marked on the machine and in the literature
accompanying the machine.
Laser Safety Statement
4
If an operating instruction appears to conflict with safety information, heed the
safety information. You may have misunderstood the operating instruction. If you
cannot resolve the conflict, contact your sales or service representative for
assistance.
The printer is certified in the U.S. to conform to the requirements of DHHS 21 CFR,
chapter 1 Subchapter J for Class I(1) laser products, and elsewhere, is certified as a
Class I laser product conforming to the requirements of IEC 825.
Class I laser products are not considered to be hazardous. The laser system and printer
are designed so there is never any human access to laser radiation above a Class I level
during normal operation, user maintenance, or prescribed service condition.
5
6
7
8
9
Unplug the machine from the AC wall socket before cleaning. Do not use liquid or
aerosol cleaners. Use only a damp cloth for cleaning.
Do not place the machine on an unstable cart, stand or table. It may fall, causing
serious damage.
WARNING
Never operate or service the printer with the protective cover removed from Laser/
Scanner assembly. The reflected beam, although invisible, can damage your eyes.
When using this product, these basic safety precautions should always be followed to
reduce risk of fire, electric shock, and injury to persons:
Your machine should never be placed on, near or over a radiator, heater, air
conditioner or ventilation duct.
Do not allow anything to rest on the power cable. Do not locate your machine
where the cords will be abused by persons walking on them.
Do not overload wall outlets and extension cords. This can diminish performance,
and may result in the risk of fire or electric shock.
10 Do not allow pets to chew on the AC power or PC interface cords.
11 Never push objects of any kind into the machine through case or cabinet
openings. They may touch dangerous voltage points, creating a risk of fire or
shock. Never spill liquid of any kind onto or into the machine.
12 To reduce the risk of electric shock, do not disassemble the machine. Take it to a
qualified service technician when repair work is required. Opening or removing
covers may expose you to dangerous voltages or other risks. Incorrect reassembly
could cause electric shock when the unit is subsequently used.
13 Unplug the machine from the PC and AC wall outlet, and refer servicing to
qualified service personnel under the following conditions:
• When any part of the power cord, plug, or connecting cable is damaged or
frayed.
• If liquid has been spilled into the machine.
• If the machine has been exposed to rain or water.
• If the machine does not operate properly after instructions have been followed.
• If the machine has been dropped, or the cabinet appears damaged.
• If the machine exhibits a sudden and distinct change in performance.
Ozone Safety
14 Adjust only those controls covered by the operating instructions. Improper
adjustment of other controls may result in damage, and may require extensive
work by a qualified service technician to restore the machine to normal operation.
During normal operation, this machine produces ozone. The ozone
produced does not present a hazard to the operator. However, it is
advisable that the machine be operated in a well ventilated area.
15 Avoid using this machine during a lightning storm. There may be a remote risk of
electric shock from lightning. If possible, unplug the AC power for the duration of
the lightning storm.
If you need additional information about ozone, please contact your
nearest Samsung dealer.
16 If you continuously print multiple pages, the surface of the output tray may become
hot. Be careful not to touch the surface, and keep children away from the surface.
1 AWG: American Wire Gauge
i
Download from Www.Somanuals.com. All Manuals Search And Download.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
Power Saver
This printer contains advanced energy conservation technology that reduces power
consumption when it is not in active use.
• Consult the dealer or an experienced radio/TV technician for help.
CAUTION: Changes or modifications not expressly approved by the manufacturer
responsible for compliance could void the user’s authority to operate the equipment.
When the printer does not receive data for an extended period of time, power
consumption is automatically lowered.
Canadian Radio Interference Regulations
Recycling
This digital apparatus does not exceed the Class A limits for radio noise emissions from
digital apparatus as set out in the interference-causing equipment standard entitled
“Digital Apparatus”, ICES-003 of the Industry and Science Canada.
Please recycle or dispose of packaging materials for this product in
an environmentally responsible manner.
Cet appareil numérique respecte les limites de bruits radioélectriques applicables aux
appareils numériques de Classe A prescrites dans la norme sur le matériel brouilleur:
“Appareils Numériques”, ICES-003 édictée par l’Industrie et Sciences Canada.
Correct Disposal of This Product (Waste Electrical &
Electronic Equipment)
Declaration of Conformity (European Countries)
Approvals and Certifications
(Applicable in the European Union and other European countries with
separate collection systems)
The CE marking applied to this product symbolises Samsung
Electronics Co., Ltd. Declaration of Conformity with the following
applicable 93/68/EEC Directives of the European Union as of the
dates indicated:
This marking shown on the product or its literature, indicates that it
should not be disposed with other household wastes at the end of its
working life. To prevent possible harm to the environment or human
health from uncontrolled waste disposal, please separate this from
other types of wastes and recycle it responsibly to promote the
sustainable reuse of material resources.
January 1, 1995: Council Directive 73/23/EEC Approximation of the
laws of the member states related to low voltage equipment.
January 1, 1996: Council Directive 89/336/EEC (92/31/EEC), approximation of the laws
of the Member States related to electromagnetic compatibility.
Household users should contact either the retailer where they purchased this product,
or their local government office, for details of where and how they can take this item for
environmentally safe recycling.
March 9, 1999: Council Directive 1999/5/EC on radio equipment and
telecommunications terminal equipment and the mutual recognition of their conformity.
Business users should contact their supplier and check the terms and conditions of the
purchase contract. This product should not be mixed with other commercial wastes for
disposal.
A full declaration, defining the relevant Directives and referenced standards can be
obtained from your Samsung Electronics Co., Ltd. representative.
Radio Frequency Emissions
FCC Regulations
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
• This device may not cause harmful interference, and
• This device must accept any interference received, including interference that
may cause undesired operation.
This device has been tested and found to comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
ii
Download from Www.Somanuals.com. All Manuals Search And Download.
Replacing the Fitted Plug (for UK Only)
Important
The mains lead for this machine is fitted with a standard (BS 1363) 13 amp plug and has
a 13 amp fuse. When you change or examine the fuse, you must re-fit the correct 13
amp fuse. You then need to replace the fuse cover. If you have lost the fuse cover, do
not use the plug until you have another fuse cover.
Please contact the people from you purchased the machine.
The 13 amp plug is the most widely used type in the UK and should be suitable.
However, some buildings (mainly old ones) do not have normal 13 amp plug sockets.
You need to buy a suitable plug adaptor. Do not remove the moulded plug.
Warning
If you cut off the moulded plug, get rid of it straight away.
You cannot rewire the plug and you may receive an electric shock if you plug it
into a socket.
IMPORTANT WARNING: You must earth this machine.
The wires in the mains lead have the following color code:
• Green and Yellow:
• Blue:
Earth
Neutral
Live
• Brown:
If the wires in the mains lead do not match the colors marked in your plug, do the
following:
You must connect the green and yellow wire to the pin marked by the letter “E” or by the
safety ‘Earth symbol’ or colored green and yellow or green.
You must connect the blue wire to the pin which is marked with the letter “N” or colored
black.
You must connect the brown wire to the pin which is marked with the letter “L” or colored
red.
You must have a 13 amp fuse in the plug, adaptor, or at the distribution board.
iii
Download from Www.Somanuals.com. All Manuals Search And Download.
OPENSSL LICENSE
ORIGINAL SSLEAY LICENSE
Copyright (c) 1998-2001 The OpenSSL Project. All rights reserved.
Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com) All rights reserved.
Redistribution and use in source and binary forms, with or without modification, are
permitted provided that the following conditions are met:
This package is an SSL implementation written by Eric Young
(eay@cryptsoft.com). The implementation was written so as to conform with
Netscapes SSL.
1. Redistributions of source code must retain the above copyright notice, this list
of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice, this
list of conditions and the following disclaimer in the documentation and/or other
materials provided with the distribution.
3. All advertising materials mentioning features or use of this software must
display the following acknowledgment: "This product includes software
developed by the OpenSSL Project for use in the OpenSSL Toolkit. (http://
www.openssl.org/)"
4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
endorse or promote products derived from this software without
5. prior written permission. For written permission, please contact openssl-
core@openssl.org.
6. Products derived from this software may not be called "OpenSSL" nor may
"OpenSSL" appear in their names without prior written permission of the
OpenSSL Project.
7. Redistributions of any form whatsoever must retain the following
acknowledgment: "This product includes software developed by the OpenSSL
Project for use in the OpenSSL Toolkit (http://www.openssl.org/)"
This library is free for commercial and non-commercial use as long as the following
conditions are aheared to. The following conditions apply to all code found in this
distribution, be it the RC4, RSA, lhash, DES, etc., code; not just the SSL code. The
SSL documentation included with this distribution is covered by the same
copyright terms except that the holder is Tim Hudson (tjh@cryptsoft.com).
Copyright remains Eric Young's, and as such any Copyright notices in the code
are not to be removed. If this package is used in a product, Eric Young should be
given attribution as the author of the parts of the library used. This can be in the
form of a textual message at program startup or in documentation (online or
textual) provided with the package.
Redistribution and use in source and binary forms, with or without modification, are
permitted provided that the following conditions are met:
1. Redistributions of source code must retain the copyright notice, this list of
conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice, this
list of conditions and the following disclaimer in the documentation and/or other
materials provided with the distribution.
3. All advertising materials mentioning features or use of this software must
display the following acknowledgement: "This product includes cryptographic
software written by Eric Young (eay@cryptsoft.com)" The word 'cryptographic'
can be left out if the rouines from the library being used are not cryptographic
related:-).
4. If you include any Windows specific code (or a derivative thereof) from the
apps directory (application code) you must include an acknowledgement: "This
product includes software written by Tim Hudson (tjh@cryptsoft.com)"
THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE OpenSSL
PROJECT OR ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND ANY EXPRESS
OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR
CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
POSSIBILITY OF SUCH DAMAGE.
This product includes cryptographic software written by Eric
Young(eay@cryptsoft.com). This product includes software written by Tim Hudson
(tjh@cryptsoft.com).
The licence and distribution terms for any publically available version or derivative
of this code cannot be changed. i.e. this code cannot simply be copied and put
under another distribution licence [including the GNU Public Licence.]
iv
Download from Www.Somanuals.com. All Manuals Search And Download.
Special features
1 Introduction
Your new printer is equipped with several special features that improve
the print quality. You can:
Congratulations on the purchase of your printer!
This chapter includes:
Print with excellent quality and high speed
•
•
•
•
• You can print up to 1200 x 1200 dpi effective
output. See the Software Section.
a
• Your printer prints A4-sized paper at up to 43 ppm
and letter-sized paper at up to 45 ppm. For duplex
printing, your printer prints A4-sized paper at up to
b
29 ipm and letter-sized paper at up to 30 ipm.
Handle paper flexibly
• The multi-purpose tray supports letterheads,
envelopes, labels, transparencies, custom-sized
materials, postcards, and heavy paper. The multi-
purpose tray holds up to 100 sheets of plain paper.
• The 500-sheet standard tray 1 supports plain
paper in various sizes.
• The 500-sheet optional tray support plain paper in
various sizes. You can install up to 3 additional
trays.
• Two output tray; select either the output tray (face-
down) or the rear cover (face-up) for the most
convenient access.
• Straight-through paper path capability from the
multi-purpose tray to the rear cover.
Create professional documents
• Print Watermarks. You can customize your
documents with words, such as “Confidential.” See
the Software Section.
• Print Posters. The text and pictures of each page
of your document are magnified and printed across
the sheet of paper and can then be taped together
to form a poster. See the Software Section.
a. pages per minute
b. images per minute
1.1
<Introduction>
Download from Www.Somanuals.com. All Manuals Search And Download.
Save time and money
• This printer allows you to use toner save mode to
Use the optional hard disk
You can install an optional hard disk in your printer.
1
2
• The 40 GB hard disk can store the data from your computer in the
print queue. This decreases the workload of the computer.
• You can print on both sides of the paper to save
paper (double-sided printing) if you use the ML-
4551ND or install the optional duplex unit in the
ML-4550 and ML-4551N.
• You can use various print features, such as storing a job in the
hard disk, proofing a job, and printing private documents.
3
4
• You can manage the print jobs in the print queue of the printer hard
disk.
For details, see page 10.4.
• You can print multiple pages on a single sheet of
paper to save paper (N-Up printing). See the
Software Section.
Print in various environments
• You can use preprinted forms and letterhead with
plain paper. See the Software Section.
• You can print in Windows 98/Me/NT 4.0/2000/XP/2003.
• Your printer is compatible with Linux and Macintosh.
• Your printer comes with both Parallel and USB interfaces.
• This printer automatically conserves electricity
by substantially reducing power consumption
when not in use.
• You can also use a network interface. The ML-4551N and ML-
4551ND come with a built-in network interface, 10/100 Base TX.
However, you need to install the optional wired network interface
card to the ML-4550.
Expand the printer capacity
• Your printer has 128 MB of memory which can be
• A Network interface enables network printing.
You can add an optional network interface card to
the ML-4550. The ML-4551N and ML-4551ND
come with a built-in network interface, 10/100
Base TX.
Printer features
The table below lists a general overview of features supported by your
printer.
(I: Installed, O: Option)
• You can add 500-sheet optional trays to your
printer. These trays let you add paper to the printer
less often.
Features
IEEE 1284 Parallel
USB 2.0
ML-4550
ML-4551N ML-4551ND
I
I
I
I
I
I
I
I
• A PostScript 3 Emulation* (PS) enables PS
printing.
Network Interface
O
* Zoran IPS Emulation compatible with PostScript 3
(Ethernet 10/100 Base TX)
• © Copyright 1995-2005, Zoran Corporation.
All rights reserved. Zoran, the Zoran logo,
IPS/PS3 and OneImage are trademarks of
Zoran Corporation.
Hard Disk
O
I
O
I
O
I
PostScript* Emulation
Duplex Unit
* 136 PS3 fonts
• Contains UFST and MicroType from Monotype Imaging Inc..
O
O
O
O
O
O
O
O
I
Optional Tray 2
Optional Tray 3
Optional Tray 4
O
O
O
1.2
<Introduction>
Download from Www.Somanuals.com. All Manuals Search And Download.
Rear view
Printer overview
Front view
* The figure above shows an ML-4551ND
with all available options.
1
2
3
4
5
6
7
power switch
rear cover
parallel port
USB port
duplex unit
network port
power receptacle
* The figure above shows an ML-4551ND
with all available options.
1
2
3
4
5
6
8
output tray
handle
9
control panel
control board cover
tray 1
paper level indicator
multi-purpose tray
top cover
10
11
12
13
optional tray 2
optional tray 3
output support
multi-purpose tray
paper width guides
7
14
optional tray 4
multi-purpose tray
extension
1.3
<Introduction>
Download from Www.Somanuals.com. All Manuals Search And Download.
Control panel overview
Finding more information
You can find information for setting up and using your printer from the
following resources, either printed or onscreen.
Quick Install
Guide
Provides information on setting up your printer
and, therefore, be sure to follow the
instructions in the guide to get the printer
ready.
Online User’s
Guide
Provides you with step-by-step instructions for
using your printer’s full features, and contains
information for maintaining your printer,
troubleshooting, and installing accessories.
This user’s guide also contains the Software
Section providing you with information on how
to print documents with your printer on various
operating systems, and how to use the
supplied software utilities.
Menu: Enters Menu mode and scrolls through the available
menus.
1
2
Note
Scroll buttons: Scroll through the options available in the
selected menu, and increase or decrease values.
• You can access the user’s guides in
other languages from the Manual
folder on the printer driver CD.
3
4
OK: Confirms the selection on the display.
Network Printer
User’s Guide
Contained on the network utilities CD,
provides you with information on setting up
and connecting your printer to a network.
Back: Sends you back to the upper menu level.
Toner Save: Allows you to save on toner by using less toner
in printing.
5
6
7
8
Demo: Prints a demo page.
Stop: Stops an operation at any time.
Printer Driver
Help
Provides you with help information on printer
driver properties and instructions for setting up
the properties for printing. To access a printer
driver help screen, click Help from the printer
properties dialog box.
Samsung
Website
If you have Internet access, you can get help,
support, printer drivers, manuals, and order
information from the Samsung website,
1.4
<Introduction>
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting a location
Select a level, stable place with adequate space for air circulation. Allow
extra space for opening covers and trays.
The area should be well-ventilated and away from direct sunlight or
sources of heat, cold, and humidity. Do not set the printer close to the
edge of your desk or table.
Clearance space
Front: 482.6 mm (enough
space so that trays can be
opened or removed)
Back: 320 mm (enough space
to allow opening of the rear
cover or the duplex unit)
Right: 100 mm (enough space
to allow opening of the control
board cover)
Left: 100 mm (enough space
for ventilation)
1.5
<Introduction>
Download from Www.Somanuals.com. All Manuals Search And Download.
Using control panel menus
2 System setup
A number of menus are available to make it easy for you to change the
printer settings. The diagram on the next column shows the menus and
all of the menu items available in each menu. The items in each menu
and the options you can select are described in more detail in the tables
This chapter shows menus you can set and provides basic settings for
your printer.
This chapter includes:
•
•
•
•
•
•
Accessing control panel menus
You can control your printer from the printer’s control panel. You can also
set the control panel menus while printing.
1
Press Menu until the menu you want appears on the bottom line of
the display and press OK.
2
Press the Scroll buttons until the desired menu item appears and
press OK.
3
4
If the menu item has sub menus, repeat step 2.
Press the Scroll buttons to access the desired setting option or the
required value.
5
6
Press OK to save your selection.
An asterisk (*) appears next to the selection on the display,
indicating that it is now the default.
Press Stop to return to Standby mode.
Note
• Print settings made from the printer driver on a connected
computer override the settings on the control panel.
2.1
<System setup>
Download from Www.Somanuals.com. All Manuals Search And Download.
Note
Menu overview
• The default settings and available values of your printer could
be differ from this guide.
The control panel menus are used to configure the printer. The control
panel provides access to the foling menus.
Job manager menu
The menus are listed based on the ML-4550 printer. The menus in the
colored characters appear only when the optional items are installed.
This menu is available when the optional hard disk is installed.
0.Job Manage.a
1. Information
Item
Explanation
Active Job
Store Job
Menu Map
Active Job
This menu shows the print jobs waiting to be
Configuraton
Demo Page
Store Job
This menu shows the print jobs stored in the
installed hard disk. See page 10.6.
Stored Job
Usage Page
Completed Job
PCL Font List
PS3 Font List
EPSON Font
1. Information menu
This menu allows you to print printer information pages that give details
about the printer and its configuration.
2. Layout
3. Paper
Orientation
Copies
Item
Explanation
Simplex Margin
Paper Size
Menu Map
The menu map shows the layout and current
settings of the control panel menu items.
Duplex
Paper Type
Paper Source
Tray Chaining
Duplex Margin
Configuraton
Demo Page
The configuration page shows the printer’s
current configuration.
The demo page allows you to check if your
printer properly performs printing. See page
2.8.
4. Graphic
5. System Setup
Resolution
Darkness
Date & Time
Stored Job
Usage Page
The stored job page shows the print file list
stored in the optional hard disk.
Form Menu
Select Form
Language
Power Save
Auto Continue
Altitude Adj.
Auto CR
Job Timeout
Maintenance
Clear Setting
Note
• This menu item is available when the
optional hard disk is installed.
The usage page contains the total number of
pages printed by person or group. This page
can be used for cost accounting.
Note
• This menu item is available when the
optional hard disk is installed.
7. Networkc
6. Emulation
Emulation Type
Setup
TCP/IP
Completed Job
The Completed Job page shows the list of
completed print jobs. The list contains up to 50
files from the latest print jobs.
EtherTalk
NetWare
Ethernet Speed
Clear Setting
Network Info
PCL Font List
PS3 Font List
EPSON Font
The font sample list shows all of the fonts
currently available for the selected language.
a. Available with an optional hard disk.
b. Available with an optional duplex unit in the ML-4550 or ML-4551N.
c. Available with an optional network interface card for the ML-4550.
2.2
<System setup>
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Layout menu
Item
Duplex
Explanation
Use the 2. Layout menu to define all settings relating to output.
Values: Off, Long Edge, Short Edge
Item
Explanation
To print on both sides of paper, choose the binding
edge as follows.
Orientation
Values: Portrait, Landscape
•
•
Long Edge: Flip on the long edge.
Short Edge: Flip on the short edge.
Choose the default orientation of the print image
on the page.
2
3
2
5
3
5
Long Edge in the
Landscape orientation
Long Edge in the
Portrait orientation
Landscape
Portrait
2
Simplex
Margin
Values: Top Margin: 0, Left Margin: 0
Set the margin of print meterials for one-sided
printing. You can increase or decrease the value in
0.1 mm increments.
3
2
5
3
5
• Top Margin: Set the top margin, from 0 to 250
mm.
Short Edge in the
Landscape orientation
Short Edge in the
Portrait orientation
• Left Margin: Set the left margin, from 0 to 164
mm.
Select Off to print on one side of the paper.
Note
• In the ML-4550 and ML-4551N, this menu
item is available when the optional duplex
unit is installed.
Duplex
Margin
Values: Top Margin/ Left Margin: 5.0,
Short Binding/ Long Binding: 0
In this menu, you can set the margins for double-
sided printing. You can increase or decrease the
value in 0.1 mm increments.
• Top Margin: Set the top margin, from 0.0 to 9.9
mm.
• Left Margin: Set the left margin, from 0.0 to 9.9
mm.
• Short Binding: Set the bottom margin of the
back of the page for short binding, from 0 to 22
mm.
• Long Binding: Set the right margin of the back
of the page for long binding, from 0 to 22 mm.
Note
• In the ML-4550 and ML-4551N, this menu
item is available when the optional duplex
unit is installed.
2.3
<System setup>
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Paper menu
Graphic menu
Use the 3. Paper menu to define all settings relating to print meterials
such as paper feed and exit, as well as size and type the specific print
meterials you are using with your printer.
Use the 4. Graphic menu to change settings affecting the quality of the
printed characters and images.
Item
Explanation
Item
Copies
Explanation
Resolution
Values: 600dpi-Normal, 1200dpi-Best
Values: 1 ~ 999
Specify the number of dots printed per inch (dpi).
The higher the setting, the sharper printed
characters and graphics.
Set the default number of copies by selecting any
number from 1 to 999.
Paper Size
• If your print jobs are mostly text, select 600dpi-
Normal for the highest quality printing.
• Select 1200dpi-Best when your job contains
bitmapped images, such as scanned photos or
some graphics, that will benefit from enhanced
line screening.
Values: A4, A5, A6, JIS B5, ISO B5, Letter, Legal,
Executive, No.10 Env., Monarch Env., DL Env.,
C5 Env., C6 Env., US Folio, Oficio, Custom Paper
Depending on the paper source or duplex setting,
available options vary.
Darkness
Select the paper size currently loaded in the tray.
Values: Normal, Light, Dark
Paper Type
Values: Plain Paper, Bond, Transparency,
Envelope, Labels, CardStock, Preprinted,
Color Paper, Thick, Thin
You can lighten or darken the print on the page by
changing the toner density setting. The Normal
setting usually produces the best result. Use the
Light toner density setting to save toner.
Select the paper type currently loaded in the tray.
Paper
Source
Values: Tray 1, Tray 2, Tray 3, Tray 4, MP Tray,
Manual Tray, Auto
Select which tray you want to use.
• If you select Auto, the printer can automatically
determine the source.
• Select MP Tray or Manual Tray to use the multi-
purpose tray. If you select Manual Tray, you
need to press OK each time you print a page.
• Tray 2, Tray 3, or Tray 4 is available only when
the corresponding tray is installed.
Tray
Chaining
Values: Off, On
When you select any other value except Auto from
Paper Source and the selected tray is empty, you
can set the printer automatically to print from other
trays.
If this menu item is set to Off, the default LED lights
red and the printer doesn’t work until you insert
paper into the specified tray.
2.4
<System setup>
Download from Www.Somanuals.com. All Manuals Search And Download.
System Setup menu
Item
Explanation
Use the 5. System Setup menu to configure a variety of printer features.
Job Timeout
Values:[0-1800] sec:15
Item
Explanation
You can set the length of time the printer waits
before printing the last page of a print job that
does not end with a command to print the page.
Date & Time
Form Menu
Select Form
Note
When a print time-out occurs, the printer prints the
page in the print buffer.
• This menu item is available when the
optional hard disk is installed.
Maintenance
This item allows you to maintain your printer.
Language
•
•
Clean Drum: Cleans the OPC drum of the toner
cartridge and produces a cleaning sheet with
toner debris on it.
Clean Fuser: Cleans the fuser unit inside of the
printer and produces a cleaning sheet with
toner debris on it.
Values: English, FRANCAIS, Espanol,
Portugues E., Portugues B., Deutsch, Italiano...
This setting determines the language of the text
that appears on the control panel display and
information printing.
• CLR Empty MSG.: Prevents the Toner Low
Replace Toner message from appearing on the
display. Once you have selected On, this
setting will be permanently written to the
memory of the toner cartridge, and this menu
will be disappeared from the Maintenance
menu.
Power Save
Values: [ 5 ] Min, [ 10] Min, [ 15 ] Min, [ 30 ] Min,
[ 60 ] Min, [ 120 ] Min
When the printer does not receive data for an
extended period of time, power consumption is
automatically lowered. You can set how long the
printer waits before going to power save mode.
•
Supplies Life: Allows you to check how many
pages have been printed and how much toner
are left in the cartridge.
Auto
Continue
Values: Off, On
This item determines whether or not the printer
continues printing when it detects the paper
unmatched to your paper setting.
Clear Setting
This menu item allows you to restore the printer’s
factory default settings.
• Off: If a paper mismatch occurs, an error
message will remain on the display and the
printer will remain off-line until you insert the
correct paper.
• On: If the paper mismatch occurs, an error
message will display. The printer will go offline
for 30 seconds, then automatically clear the
message and continue printing.
Altitude Adj.
Auto CR
Values: Plain, High, Higher, Highest
You can optimize print quality according to your
altitude.
Values: LF, LF+CR
This item allows you to append the required
carriage return to each line feed.
Refer to the following samples:
AA
BB
CC
AA
BB
CC
LF
LF+CR
2.5
<System setup>
Download from Www.Somanuals.com. All Manuals Search And Download.
Emulation menu
Item
Pitch
Explanation
Use the 6. Emulation menu to configure printer language emulation.
Values: 0.44 ~ 99.99 (0.01 unit)
Item
Explanation
When you select one between PCL1 and PCL7 from
the Typeface menu, you can determine the font size by
setting the number of characters that will print in one
horizontal inch of type. The default value, 10 is the
best size.
Emulation
Type
Values: Auto, PCL, PostScript, EPSON,
HEXDUMP, PS3, IBM ProPrint
The printer language defines how the computer
communicates with the printer.
Lines
Values: [5 ~ 128]:64
If you select Auto, your printer can change the
printer language automatically.
This item allows you to set vertical spacing from 5 to
128 lines for the default paper size. The default
number of lines may differ according to the paper size
and printing orientation.
Setup
Values: PCL, PostScript, EPSON
See the following tables to configure properties of the
printer language.
PostScript
This menu provides you with the Print PS Error menu item.
PCL
This menu sets the PCL emulation configuration. You can set the font
type, symbol type, lines per page, and font size.
Item
Explanation
Print PS
Error
Values: On, Off
Item
Explanation
You can select whether or not your printer prints an
error list when a PS error occurs.
Typeface
Values: PCL1 ~ PCL54
• Select On to print PS 3 emulation errors. If an error
occurs, the job stops processing, the error message
prints, and the printer flushes the job.
• If this menu is set to Off, the job is flushed without an
indication of the error.
You can select the standard font to be used in PCL
emulation.
• PCL1~PCL7’s interval between letters is fixed, and
PCL8~PCL45’s interval is proportional to the font
type and font size. You can adjust the font size of
PCL1~PCL7 using the Pitch item, and
PCL8~PCL45 can do using Point Size item.
• PCL46~PCL54’s interval and font size are fixed.
EPSON
This menu sets the EPSON emulation configuration.
Item Explanation
Font
Symbol
Values: ROMAN8 ~ PCCYRIL
This item selects the symbol set to be used in PCL
emulation. The symbol is the group of numbers,
marks, and special signs being used when printing
letters.
Values: SANSERIF, ROMAN
You can select the default font will be used in EPSON
emulation.
Depending on the Typeface setting, available symbol
sets vary.
Character
Set
Values: USA, FRANCE, GERMANY, UK,
DENMARK1, SWEDEN, ITALY, SPAIN1, JAPAN,
NORWAY, DENMARK2, SPAIN2, LATIN
Point Size
Courier
Values: 4.00 ~ 999.75 (0.25 unit)
This item allows you to select a character set of the
desired language.
When you select one between PCL8 and PCL45 from
the Typeface menu, you can determine the font size by
setting the height of the characters in the font.
Character
Tab.
Values: ITALIC, PC437US, PC850
Values: Regular, Dark
This item selects the character set.
This item lets you select the version of Courier font to
use.
2.6
<System setup>
Download from Www.Somanuals.com. All Manuals Search And Download.
Network menu
Item
Pitch
Explanation
This menu lets you configure the network interface installed in your
printer. You can reset the network interface and print a configuration
page. For details, see page 4.1.
Values: 10, 12, 17.14, 20
You can determine the font size by setting the number
of characters that will print in one horizontal inch of
type.
Item
TCP/IP
Explanation
Values: DHCP, BOOTP, Static
LPI
Values: 6, 8
This item allows you to manually set the TCP/IP
addresses or receive the addresses from the
network.
You can set the number of lines printed in one vertical
inch.
Auto
Wrap
• DHCP: The DHCP server allots the IP address to
you automatically.
Values: Off, On
• BOOTP: The BOOTP server allots the IP address
to you automatically.
• Static: You can enter IP Address, Subnet Mask,
and Gateway manually.
This item determines whether or not the printer
automatically performs line feed when the data
overflows the printable area of the print meterials.
EtherTalk
NetWare
Values: Off, On
This item lets you select whether or not you use the
EtherTalk protocol. Select On to use the protocol.
Values: Auto, 802.2, 802.3, Ethernet II, SNAP, Off
This item lets you select the IPX frame type.
• Auto: You can set the printer to select the frame
type automatically.
• 802.2: Select this value to use the IEEE 802.2
frame type.
• 802.3: Select this value to use the IEEE 802.3
frame type.
• Ethernet II: Select this value to use the Ethernet 2
frame type.
• SNAP: Select this value to use the SNAP frame
type.
• Off: You can disable the NetWare protocol.
Ethernet
Speed
Values: Auto, 10M Half, 10M Full, 100M Half,
100M Full
This item allows you to select the ethernet speed.
Clear
Setting
This item performs a simple reset and restores the
factory default settings for the network
configuration. This setting will only take effect after
you restart the printer.
Network
Info
This item prints a page showing the network
parameters you set.
2.7
<System setup>
Download from Www.Somanuals.com. All Manuals Search And Download.
Printing a demo page
Changing the font setting
After setting up your printer, print a demo page to make sure that the
printer is operating correctly.
Your machine has preset the font for your region or country. If you want
to change the font which you prefer or set the font under special
condition such as the DOS environment, you can change the font setting
as follows:
Press and hold Demo for about 2 seconds.
Or,
1
2
3
Press Menu and then OK when 1. Information appears.
1
Press Menu on the control panel until you see 6. Emulation
feature.
Press the Scroll buttons until Demo Page appears and press OK.
2
3
4
5
6
7
8
Press OK to access the font setting.
Press OK when Yes appears.
Press the left/right arrow until Setup displays.
Press the left/right arrow until PCL displays.
Press the left/right arrow until Symbol displays.
Press the left/right arrow until your preferred font displays.
Press OK.
A demo page prints out.
Changing the display language
To change the language that is displayed on the control panel, follow
these steps:
1
Press Menu until 5. System Setup appears on the bottom line of
the display and press OK.
Press Stop to return to machine ready mode.
Note
2
3
Press the Scroll buttons until Language appears and press OK.
Following information shows the proper font list for
corresponding languages.
Press the Scroll buttons to select the language you want and press
OK.
•Russian: CP866, Cyrillic
•Hebrew: 15Q, 8H, 0H (Israel only)
•Greek: GREEK, PC737
4
Press Stop to return to Standby mode.
•Arabic & Farsi: ARABIC8, WINARABIC, PC864, FARSI,
ISOARABIC.
Using toner save mode
Toner save mode allows the printer to use less toner on each page.
Activating this mode extends the life of your toner cartridge and reduces
your cost per page beyond what one would experience in the normal
mode, but it reduces print quality. This setting is not available with the
1200dpi-Best setting.
There are two ways to enable this mode:
Using the control panel button
Press Toner Save on the control panel. The printer must be in Standby
mode; the Status LED lights green and Ready is shown on the display.
• If the button backlight is on, the mode is enabled and the printer uses
less toner to print a page.
• If the button backlight is off, the mode is disabled and the printer
prints in normal mode.
From the software application
You can set toner save mode from the printer properties window on your
printer driver. See the Software Section.
2.8
<System setup>
Download from Www.Somanuals.com. All Manuals Search And Download.
Supplied software
3 Software overview
You must install the printer software using the supplied CDs after you
have set up your printer and connected it to your computer.
This chapter gives you an overview of the software that comes with your
printer. Further details about installing and using the software are exed
in the Software Section.
Each CD provides you with the following software:
This chapter includes:
CD
printer
Contents
•
•
•
Windows
• Printer driver: Use this driver to
take full advantage of your printer’s
features.
software CD
• Smart Panel: This program allows
you to monitor the printer’s status
and alerts you when an error
occurs during printing.
• Direct Printing Utility: This
program allows you to print PDF
files easily.
• Postscript Printer Description
(PPD) file: Use the PostScript
driver to print documents with
complex fonts and graphics in the
PostScript language.
• User’s Guide in PDF
Linux
• Printer driver: Use this driver to
run your printer from a Linux
computer and print documents.
• Smart Panel: This program allows
you to monitor the printer’s status
and alerts you when an error
occurs during printing.
Macintosh
• Postscript Printer Description
(PPD) file: Use this file to run your
printer from a Macintosh computer
and print documents.
• Smart Panel: This program allows
you to monitor the printer’s status
and alerts you when an error
occurs during printing.
network
utilities CD
Windows
• SyncThru™ Web Admin Service:
Use this web-based program to
remotely manage, monitor, and
troubleshoot network printers.
• Set IP: Use this program to set your
printer’s TCP/IP addresses.
• Network Printer User’s Guide in
PDF
(ML-4551N,
ML-4551ND
only)
3.1
<Software overview>
Download from Www.Somanuals.com. All Manuals Search And Download.
Printer driver features
System requirements
Your printer drivers support the following standard features:
• Paper source selection
Before you begin, ensure that your system meets the following
requirements:
• Paper size, orientation and media type
• Number of copies
Windows
Item
Requirements
Recommended
In addition, you can use various special printing features. The following
table shows a general overview of features supported by your printer
drivers:
Operating
system
Windows 98/Me/NT 4.0/2000/XP/2003
PCL 6
PostScript
CPU
RAM
Windows 98/
Me/NT 4.0/2000 400 MHz or
higher
Pentium II
Pentium III
933 MHz
Feature
Windows
Windows
Macintosh
Linux
O
Toner save
O
O
O
O
X
Windows XP/
2003
Pentium III
933 MHz or
higher
Pentium IV
1 GHz
Print quality
option
O
O
Windows 98/
Me/NT 4.0/2000
64 MB or more
128 MB or more
300 MB or more
1 GB or more
128 MB
256 MB
1 GB
Poster
printing
O
O
X
X
X
Windows XP/
2003
Multiple
pages per
sheet (N-up)
O
O
O
(2, 4)
Free disk
space
Windows 98/
Me/NT 4.0/2000
Fit to page
printing
O
O
O
O
Windows XP/
2003
5 GB
Scale printing
O
O
O
X
O
O
O
X
Internet
Explorer
5.0 or higher
Different
source for
first page
Note
Watermark
Overlay
O
O
X
X
X
X
X
X
• For Windows NT 4.0/2000/XP/2003, users who have an
administrator right can install the software.
Note
• Overlay is not supported in Windows NT 4.0.
3.2
<Software overview>
Download from Www.Somanuals.com. All Manuals Search And Download.
Linux
Item
Requirements
• Red Hat 8.0 ~ 9.0
Operating system
• Fedora Core 1 ~ 3
• Mandrake 9.2 ~ 10.1
• SuSE 8.2 ~ 9.2
Processor
RAM
Pentium IV 1 GHz or higher
256 MB or higher
Free disk page
Software
1 GB or higher
• Linux Kernel 2.4 or higher
• Glibc 2.2 or higher
• CUPS
• SANE
Macintosh
Item
Operating system
RAM
Requirements
8.6 ~ 9.2 and 10.1 ~ 10.4
128 MB
Free disk space
Connection
200 MB
USB interface, Network interface
3.3
<Software overview>
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
4 Network setup
Once you have connected your printer to a network with an RJ-45
Ethernet cable, you can share the printer with other network users.
This chapter gives you step-by-step instructions for setting up your
printer for network connections.
You need to set up the network protocols on the printer to use it as your
network printer. Protocols can be set up by the following two methods:
This chapter includes:
•
•
•
•
•
•
•
Via network administration programs
You can configure your printer’s print server settings and manage the
printer via the following programs that came with your printer:
• SyncThru™ Web Admin Service: A web-based printer
management solution for network administrators. SyncThru™ Web
Admin Service provides you with an efficient way of managing
network devices and lets you remotely monitor and troubleshoot
network printers from any site with corporate intranet access.
• SyncThru™ Web Service: A web server embedded to your network
print server, which allows you to configure the network parameters
necessary for the printer to connect to various network environments.
• SetIP: A utility program allowing you to select a network interface and
manually configure the addresses for use with the TCP/IP protocol.
For further details, refer to the user’s guide on the network utilities CD
that came with your printer.
Via the control panel
You can set up the following basic network parameters through the
printer’s control panel:
• Configure TCP/IP
• Configure IPX frame types for NetWare
• Configure EtherTalk
4.1
<Network setup>
Download from Www.Somanuals.com. All Manuals Search And Download.
5
Set the first byte between 0 and 255 using the Scroll buttons and
press OK to move to the next byte.
Supported operating systems
Repeat this to complete the address from the 1st byte to the 4th
byte.
The following table shows the network environments supported by the
printer:
6
7
When you have finished, press OK.
Item
Requirements
• 10/100 Base-TX
Repeat step 5 and 6 to configure the other TCP/IP parameters:
Subnet Mask and Gateway address.
Network interface
Network operating
system
• Novell NetWare 4.x, 5.x, 6.x
• Windows 98/Me/NT 4.0/2000/XP/2003
• Various Linux OS
8
Press Stop to return to Standby mode.
Dynamic addressing (BOOTP/DHCP)
• Mac OS 10.3 and above (TCP/IP only)
To have a TCP/IP address assigned automatically by the server, take the
following steps:
Network protocols
• NetWare IPX/SPX
• TCP/IP
1
Press Menu until Network appears on the bottom line of the
display and press OK.
• EtherTalk
• HTTP 1.1
• SNMP
2
3
Press OK when TCP/IP appears.
Dynamic
• DHCP, BOOTP
Press the Scroll buttons until DHCP or BOOTP appears and press
addressing server
OK
.
• IPX/SPX: Internet Packet eXchange/Sequenced Packet eXchange
• TCP/IP: Transmission Control Protocol/Internet Protocol
• DHCP: Dynamic Host Configuration Protocol
• BOOTP: Bootstrap Protocol
4
Press Stop to return to Standby mode.
Configuring EtherTalk
EtherTalk is AppleTalk used in an Ethernet network. This protocol is
widely used in Macintosh network environments. To use EtherTalk, take
the following steps:
Configuring TCP/IP
Your printer can be set up with a variety of TCP/IP network information,
such as an IP address, a subnet mask, a gateway, and DNS addresses.
There are several ways in which your printer can be assigned a TCP/IP
address, depending on your network.
1
Press Menu until Network appears on the bottom line of the
display and press OK.
2
3
4
Press the Scroll buttons until EtherTalk appears and press OK.
• Static addressing: A TCP/IP address is assigned manually by the
system administrator.
Press the Scroll buttons until On appears and press OK
.
• Dynamic addressing via BOOTP/DHCP (default): A TCP/IP address
is assigned automatically by the server.
Press Stop to return to Standby mode.
Note
• Before configuring TCP/IP, you need to set the network
protocol to TCP/IP.
Static addressing
To enter a TCP/IP address from your printer’s control panel, take the
following steps:
1
Press Menu until Network appears on the bottom line of the
display and press OK
.
2
3
4
Press OK when TCP/IP appears.
Press the Scroll buttons until Static appears and press OK.
Press OK when IP Address appears.
4.2
<Network setup>
Download from Www.Somanuals.com. All Manuals Search And Download.
Configuring IPX frame types
Restoring the network configuration
To use IPX/SPX protocol networks (for example, Novell NetWare), the
format of the network communication frames must be specified for the
printer. In most cases, you can keep the Auto setting. However, you can
manually set the frame type format, if required. Take the following step
to change the frame type format:
You can return the network configuration to its default settings.
1
Press Menu until Network appears on the bottom line of the
display and press OK.
2
Press the Scroll buttons until Clear Setting appears and press
OK.
1
Press Menu until Network appears on the bottom line of the
display and press OK.
3
4
Press OK when Yes appears to restore the network configuration.
2
3
Press the Scroll buttons until NetWare appears and press OK.
Power the printer off and back on.
Press the Scroll buttons until the desired frame type appears.
• Auto: Automatically senses and limits the frame type to the first
one detected.
Printing a network configuration page
• 802.2: Limits the frame type to IPX over IEEE 802.2 with IEEE
802.3 frames. All others will be discarded.
The network configuration page shows how the network interface card
on your printer is configured.
• 802.3: Limits the frame type to IPX over IEEE 802.3 frames. All
1
Press Menu until Network appears on the bottom line of the
others will be discarded.
display and press OK.
• Ethernet II: Limits the frame type to IPX over Ethernet Frames. All
others will be discarded.
2
3
Press the Scroll buttons until Network Info appears and press OK.
• SNAP: Limits the frame type to IPX over SNAP with IEEE 802.3
frames. All others will be discarded.
Press OK when Yes appears.
The network configuration page prints out.
• Off: Disables the IPX/SPX protocol.
Press OK to save the selection.
4
5
Press Stop to return to Standby mode.
Setting Ethernet speed
You can select the communication speed for Ethernet connections.
1
2
3
4
Press Menu until Network appears on the bottom line of the
display and press OK.
Press the Scroll buttons until Ethernet Speed appears and press
OK.
Press the Scroll buttons until the speed you want appears and
press OK.
Press Stop to return to Standby mode.
4.3
<Network setup>
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting print media
5 Loading print media
You can print on a variety of print media, such as plain paper, envelopes,
labels, and transparencies. Always use print media that meet the
guidelines for use with your printer. Print media that does not meet the
guidelines outlined in this user’s guide may cause the following
problems:
This chapter will help you understand types of paper you can use with
your printer and how to properly load paper in the different paper trays
for the best print quality.
This chapter includes:
• Poor print quality
•
•
•
• Increased paper jams
• Premature wear on the printer
Properties, such as weight, composition, grain, and moisture content,
are important factors that affect the printer’s performance and the output
quality. When you choose print media, consider the following:
• Desired outcome: The print media you choose should be appropriate
for your project.
• Size: You can use any size media that fits easily within the paper
adjusters of the paper tray.
• Weight: Your printer supports print media weights as follows:
2
- 16 to 28 lb bond (60 to 105 g/m ) for the tray 1 and optional tray 2,
tray 3, tray 4
2
- 16 to 53 lb bond (60 to 200 g/m ) for the multi-purpose tray
- 20 to 24 lb (75 to 90 g/m ) for the duplex printing
2
• Brightness: Some print media are whiter than others and produce
sharper, more vibrant images.
• Surface smoothness: The smoothness of the print media affects how
crisp the printing looks on the paper.
Notes
• Some print media may meet all of the guidelines in this section
and still not produce satisfactory results. This may be the
result of improper handling, unacceptable temperature and
humidity levels, or other variables over which Samsung has no
control.
• Before purchasing large quantities of print media, ensure that
it meets the requirements specified in this user’s guide.
Caution
• Using print media that does not meet these specifications may
cause problems, requiring repairs. Such repairs are not
covered by Samsung’s warranty or service agreements.
5.1
<Loading print media>
Download from Www.Somanuals.com. All Manuals Search And Download.
Supported sizes of paper
a
b
Type
Plain paper
Size
Dimensions
Weight
Capacity
2
2
Letter
216 x 279 mm (8.5 x 11 inches)
216 x 356 mm (8.5 x 14 inches)
216 x 330.2 mm (8.5 x 13 inches)
216 x 343 mm (8.5 x 13.5 inches)
210 x 297 mm (8.27 x 11.69 inches)
182 x 257 mm (7.18 x 10.12 inches)
176 x 250 mm (6.93 x 9.84 inches)
184.2 x 266.7 mm (7.25 x 10.5 inches)
148.5 x 210 mm (5.85 x 8.27 inches)
105 x 148.5 mm (4.13 x 5.85 inches)
176 x 250 mm (6.93 x 9.84 inches)
98.4 x 190.5 mm (3.88 x 7.5 inches)
105 x 241 mm (4.12 x 9.5 inches)
110 x 220 mm (4.33 x 8.66 inches)
162 x 229 mm (6.38 x 9.02 inches)
114 x 162 mm (4.49 x 6.38 inches)
Refer to the Plain paper section
• 60 to 105 g/m (16 to 28 lb
bond) for the tray
• 60 to 200 g/m (16 to 53 lb
• 500 sheets of 75 g/m
(20 lb bond) paper for the
tray
• 100 sheets for the multi-
purpose tray
2
Legal
bond) for the multi-purpose
Folio
tray
Oficio
A4
JIS B5
ISO B5
Executive
A5
A6
2
2
Envelope
Envelope B5
Envelope Monarch
Envelope COM-10
Envelope DL
Envelope C5
Envelope C6
Letter, A4
60 to 90 g/m (16 to 24 lb)
10 sheets of 75 g/m (20 lb)
in the multi-purpose tray
2
2
Transparency
Labels
138 to 146 g/m (37 to 39 lb)
50 sheets of 75 g/m (20 lb)
in the multi-purpose tray
2
2
Letter, Legal, Folio,
Oficio, A4, JIS B5,
ISO B5, Executive,
A5, A6
Refer to the Plain paper section
120 to 150 g/m (32 to 40 lb)
25 sheets of 75 g/m (20 lb)
in the multi-purpose tray
2
2
Card stock
Letter, Legal, Folio,
Oficio, A4, JIS B5,
ISO B5, Executive,
A5, A6
Refer to the Plain paper section
60 to 200 g/m (16 to 53 lb)
10 sheets of 75 g/m (20 lb)
in the multi-purpose tray
2
Minimum size (custom)
Maximum size (custom)
76 x 127 mm (3 x 5 inches)
60 to 200 g/m (16 to 53 lb)
Refer to the above Capacity
sections
216 x 356 mm (8.5 x 14 inches)
2
a. If media weight is over 28 lb (105 g/m ), use the multi-purpose tray.
b. Maximum capacity may differ depending on media weight, thickness, and environmental conditions.
Print media for duplex printing
Type
Size
Weight
2
Plain paper
A4, Letter, Oficio, Legal, and Folio
75 ~ 90 g/m (20 to 24 lb)
5.2
<Loading print media>
Download from Www.Somanuals.com. All Manuals Search And Download.
Guidelines for special print media
Guidelines for selecting and storing print media
When selecting or loading paper, envelopes, or other print media, keep
these guidelines in mind:
Media type
Guidelines
Envelopes
• Successful printing on envelopes depends
upon the quality of the envelopes. When
selecting envelopes, consider the following
factors:
• Always use print media that conform with the specifications listed on
the next column.
• Attempting to print on damp, curled, wrinkled, or torn paper can cause
paper jams and poor print quality.
- Weight: The weight of the envelope paper
should not exceed 90 g/m2 (24 lb) or jamming
may occur.
• For the best print quality, use only high quality copier grade paper
specifically recommended for use in laser printers.
• Avoid using the following media types:
- Construction: Prior to printing, envelopes
should lie flat with less than 6 mm
(0.25 inches) curl, and should not contain air.
- Paper with embossed lettering, perforations, or a texture that is too
smooth or too rough
- Erasable bond paper
- Condition: Envelopes should not be wrinkled,
nicked, or otherwise damaged.
- Multi-paged paper
- Temperature: You should use envelopes that
are compatible with the heat and pressure of
the printer during operation.
• Use only well-constructed envelopes with sharp
and well creased folds.
- Synthetic paper and thermally reactive paper
- Carbonless paper and Tracing paper.
• Use of these types of paper could result in paper jams, chemical
smells, and damage to your printer.
• Store print media in its ream wrapper until you are ready to use it.
Place cartons on pallets or shelves, not on the floor. Do not place
heavy objects on top of the paper, whether it is packaged or
unpackaged. Keep it away from moisture or other conditions that can
cause it to wrinkle or curl.
• Do not use stamped envelopes.
• Do not use envelopes with clasps, snaps,
windows, coated lining, self-adhesive seals, or
other synthetic materials.
• Do not use damaged or poorly made
envelopes.
• Be sure the seam at both ends of the envelope
extends all the way to the corner of the
envelope.
o
o
• Store unused print media at temperatures between 15 C and 30 C
o
o
(59 F to 86 F). The relative humidity should be between 10% and
70%.
• Store unused print media in a moisture-proof wrap, such as a plastic
container or bag, to prevent dust and moisture from contaminating
your paper.
• Load special media types one sheet at a time through the multi-
purpose tray to avoid paper jams.
Acceptable
• To prevent print media, such as transparencies and label sheets, from
sticking together, remove them as they print out.
Unacceptable
• Envelopes with a peel-off adhesive strip or with
more than one flap that folds over to seal must
use adhesives compatible with the printer’s
fusing temperature of 195° C (383° F) for
0.1 second. The extra flaps and strips might
cause wrinkling, creasing, or jams, and may
even damage the fuser.
• For the best print quality, position margins no
closer than 15 mm (0.6 inches) from the edges
of the envelope.
• Avoid printing over the area where the
envelope’s seams meet.
5.3
<Loading print media>
Download from Www.Somanuals.com. All Manuals Search And Download.
Media type
Guidelines
Media type
Guidelines
Transparencies • To avoid damaging the printer, use only
transparencies designed for use in laser
printers.
Preprinted
paper
• Letterhead must be printed with heat-resistant
ink that will not melt, vaporize, or release
hazardous emissions when subjected to the
printer’s fusing temperature of 195° C (383° F)
for 0.1 second.
• Letterhead ink must be non-flammable and
should not adversely affect printer rollers.
• Forms and letterhead should be sealed in a
moisture-proof wrapping to prevent changes
during storage.
• Before you load preprinted paper, such as
forms and letterhead, verify that the ink on the
paper is dry. During the fusing process, wet ink
can come off preprinted paper, reducing print
quality.
• Transparencies used in the printer must be able
to withstand 195° C (383° F), the printer’s
fusing temperature.
• Place them on a flat surface after removing
them from the printer.
• Do not leave them in the paper tray for long
periods of time. Dust and dirt may accumulate
on them, resulting in spotty printing.
• To avoid smudging caused by fingerprints,
handle them carefully.
• To avoid fading, do not expose printed
transparencies to prolonged sunlight.
• Ensure that transparencies are not wrinkled,
curled, or have any torn edges.
Loading paper
Labels
• To avoid damaging the printer, use only labels
designed for use in laser printers.
• When selecting labels, consider the following
factors:
Load the print media you use for the majority of your print jobs in the tray
1. The tray 1 can hold a maximum of 500 sheets of 75 g/m2 (20 lb) plain
paper.
- Adhesives: The adhesive material should be
stable at 195° C (383° F), the printer’s fusing
temperature.
You can purchase optional trays and attach them below the standard tray
to load an additional 500 sheets of paper for each tray. You can attach
up to three additional trays. For order information for optional trays, see
page 7.1.
- Arrangement: Only use labels with no
exposed backing between them. Labels can
peel off sheets that have spaces between the
labels, causing serious jams.
The paper level indicator on the front of the tray 1 and the optional trays
shows the amount of paper currently left in the tray. When the tray is
empty, the indicator of the bar is completely lowered.
- Curl: Prior to printing, labels must lie flat with
no more than 13 mm (5 inches) of curl in any
direction.
- Condition: Do not use labels with wrinkles,
bubbles, or other indications of separation.
• Make sure that there is no exposed adhesive
material between labels. Exposed areas can
cause labels to peel off during printing, which
can cause paper jams. Exposed adhesive can
also cause damage to printer components.
• Do not run a sheet of labels through the printer
more than once. The adhesive backing is
designed for only a single pass through the
printer.
• Do not use labels that are separating from the
backing sheet or are wrinkled, bubbled, or
otherwise damaged.
Full
Empty
Card stock or
custom-sized
materials
• Do not print on media smaller than 76 mm
(3 inches) wide or 127 mm (5 inches) long.
• In the software application, set margins at least
6.4 mm (0.25 inches) away from the edges of
the material.
5.4
<Loading print media>
Download from Www.Somanuals.com. All Manuals Search And Download.
2
Squeeze the paper length guide and slide it to the correct position
for the paper size you are loading, which is marked at the bottom of
the tray.
Using the standard tray or the optional trays
Load the print media you use for the majority of your print jobs in the
standard tray. The standard tray can hold a maximum of 500 sheets of
2
75 g/m (20 lb) paper.
To load paper, pull open the tray and load paper with the side to be
printed on face down.
1
paper length guide
1
3
Squeeze the paper width guides and slide them to the desired
paper size marked at the bottom of the tray.
You can load letterhead paper with the design side face down. The top
edge of the sheet with the logo should be placed at the front of the tray.
Notes
1
• If you experience problems with paper feed, place one sheet at
a time in the multi-purpose tray.
• You can load previously printed paper. The printed side should
be facing up with an uncurled edge at the front of the tray. If
you experience problems with paper feed, turn the paper
around. Note that the print quality is not guaranteed.
Changing the size of the paper in the tray
paper width guide
1
The tray is preset to Letter or A4 size, depending on your country. To
change the size, you need to adjust the paper guides.
1
Push the back plate of the tray outwards completely so that it can
extend the length of the tray.
Notes
• Do not push the paper width guide far enough to cause the
media to warp.
• If you do not adjust the paper width guide, it may cause paper
jams.
4
Load paper with the print side down.
5.5
<Loading print media>
Download from Www.Somanuals.com. All Manuals Search And Download.
• Envelopes: Flap side down and with the stamp area on the top left
side.
Using the multi-purpose tray
The multi-purpose tray can hold special sizes and types of print media,
such as transparencies, postcards, note cards, and envelopes. It is
useful for single page printing on letterhead or colored paper.
Note
• To print on envelopes, you must open the rear cover and push
the fuser levers upwards. The print quality will be enhanced.
To load paper in the multi-purpose tray:
1
Pull the multi-purpose tray down towards you and pull the multi-
purpose tray extension to hold longer paper.
• Transparencies: Print side up and the top with the adhesive strip
entering the printer first.
2
If you are using paper, flex or fan the edge of the paper stack to
separate the pages before loading.
• Labels: Print side up and the top short edge entering the printer
first.
• Preprinted paper: Design side up and the top edge entering the
printer first.
• Card stock: Print side up and the short edge entering the printer
first.
• Previously printed paper: Previously printed side down and an
uncurled edge entering the printer first.
For transparencies, hold them by the edges and avoid touching the
print side. Oils from your fingers can cause print quality problems.
Note
3
Load the paper with the side to be printed on facing up.
• Make sure that you have not loaded too much print media. The
print media buckles if you load a stack that is too deep or if you
push it in too far.
Caution
• When you print on special media like envelopes, labels,
transparencies, or cards, the output location should be the rear
cover. Open the rear cover to use it. See page 5.8.
Depending on the media type you are using, keep the following
loading guidelines:
5.6
<Loading print media>
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Squeeze the multi-purpose tray paper width guides and adjust
them to the width of the paper. Do not force too much, or the paper
will be bent, which will result in a paper jam or skew.
1
Load the paper with the side to be printed on facing up.
2
Squeeze the multi-purpose tray paper width guides and adjust
them to the width of the paper. Do not force too much, or the paper
will be bent, which will result in a paper jam or skew.
5
6
When you print a document, set the paper source and type in the
software application. See the Software Section.
For information about setting the paper source and type on the
After printing, put the multi-purpose tray extension back to its place
and close the multi-purpose tray.
Tips on using the multi-purpose tray
• Load only one size of print media at a time in the multi-purpose tray.
• To prevent paper jams, do not add paper when there is still paper in
the multi-purpose tray. This also applies to other tray.
• Print media should be loaded face up with the top edge going into the
multi-purpose tray first and be placed in the center of the tray.
jams and print quality problems.
3
4
When you print a document, set the paper source to Manual Feed
and select the appropriate paper size and type in the software
application. See the Software Section.
• Flatten any curl on postcards, envelopes, and labels before loading
them into the multi-purpose tray.
Print a document.
• When you print on 76 mm x 127 mm (3 x 5 inches) sized media on
the multi-purpose tray, open the rear cover for straight paper path to
avoid paper jams.
The display shows a message prompting you to load paper and
press OK.
• When you print on transparencies, open the rear cover. If not they
may tear while exiting the printer.
5
Press OK.
The printer picks up the print media and prints. After one page is
printed, the message appears again.
Using manual feed mode
Note
You can manually load a sheet of print media in the multi-purpose tray if
you select Manual Feed in the Source option from the Paper tab when
you change print settings to print a document. See the Software
Section. Manually loading paper can be helpful when you want to check
the print quality after each page is printed.
• If you do not press the button, after a pause the printer will
automatically pick the print media.
6
Insert the next sheet into the multi-purpose tray and press OK.
Repeat this step for every page to be printed.
This loading procedure is almost the same as the procedure for loading
in the multi-purpose tray, except you load paper sheet-by-sheet in the
tray, send print data to print the first page, and press OK on the control
panel to print each following page.
5.7
<Loading print media>
Download from Www.Somanuals.com. All Manuals Search And Download.
Printing to the output tray (Face down)
Selecting an output location
The output tray collects paper face down, in the order in which the sheets
were printed. The tray should be used for most print jobs.
The printer has two output locations; the rear cover (face up) and the
output tray (face down).
Printing to the rear cover (Face up)
Using the rear cover, paper comes out of the printer face up.
Printing from the multi-purpose tray to the rear cover provides a straight
paper path. Using the rear cover might improve the output quality with
special print media.
1
2
To use the rear cover, open it by pulling down and pull the rear cover
extension.
rear cover
output tray
1
2
The printer sends output to the output tray by default. To use the output
tray, make sure that the rear cover is closed.
Notes
• If paper coming out of the output tray has problems, such as
excessive curl, try printing to the rear cover.
Caution
• The fuser area inside the rear cover of your printer becomes
very hot when in use. Take care when you access this area.
• To avoid paper jams, do not open or close the rear cover while
the printer is printing.
5.8
<Loading print media>
Download from Www.Somanuals.com. All Manuals Search And Download.
Printing a document
6 Basic printing
This printer allows you to print from various Windows, Macintosh, or
Linux applications. The exact steps for printing a document may vary
depending on the application you use.
This chapter explains common printing tasks.
This chapter includes:
•
•
For details about printing, see the Software Section.
Canceling a print job
If the print job is waiting in a print queue or print spooler, such as the
printer group in Windows, delete the job as follows:
1
2
Click the Windows Start button.
For Windows 98/Me/NT 4.0/2000, select Settings and then
Printers.
For Windows XP/2003, select Printers and Faxes.
3
4
Double-click the Samsung ML-4550 Series PCL 6 or Samsung
ML-4550 Series PS icon.
From the Document menu, select Cancel Printing (Windows 98/
Me) or Cancel (Windows NT 4.0/2000/XP/2003).
Note
• You can access this window simply by double-clicking the
printer icon at the bottom right corner of the Windows desktop.
You can also cancel the current job by pressing Stop on the control
panel of your printer.
6.1
<Basic printing>
Download from Www.Somanuals.com. All Manuals Search And Download.
Toner cartridges
7 Ordering supplies and
accessories
When the toner runs out, you can order the following types of toner
cartridges for your printer:
This chapter provides information on purchasing toner cartridges and
accessories available for your printer.
a
Type
Standard yield
High yield
Yield
10,000 pages
20,000 pages
Part number
ML-D4550A
ML-D4550B
•
•
•
a. Declared yield value in accordance with ISO/IEC 19752.
Accessories
You can purchase and install accessories to enhance your printer’s
performance and capacity.
The following accessories are available for your printer:
Accessory
Description
Part number
ML-S4550A
Optional Tray
If you are experiencing
frequent paper supply
problems, you can
attach additional 500
sheet trays up to three.
You can print documents
on various sizes and
types of print media.
DIMM
Extends your printer’s
memory capacity.
• ML-MEM150:
128 MB
• ML-MEM160:
256 MB
Ethernet 10/100
Base TX Wired
Network Printer
Interface Card
Allows you to connect
your printer to a network
environment using the
wired network card.
ML-NWA20N
Duplex Unit
Allows you to print on
both sides of the paper.
ML-3560U1
ML-HDK210
Hard Disk
Allows you to enhance
the printer’s capability
and print in various
ways.
How to purchase
To order Samsung-authorized supplies or accessories, contact your
local Samsung dealer or the retailer where you purchased your printer,
information on calling for technical support.
7.1
<Ordering supplies and accessories>
Download from Www.Somanuals.com. All Manuals Search And Download.
Printing information pages
8 Maintenance
From the printer’s control panel, you can print pages that give detailed
information about the printer. They can help you check your printer’s
status and maintain the printer.
This chapter provides information for maintaining your printer and the
toner cartridge, as well as suggestions for high-quality and economical
printing.
1
2
3
Press Menu until Information appears on the bottom line of the
display and press OK.
This chapter includes:
•
•
•
•
Press the Scroll buttons until the information page you want
appears and press OK.
Press OK when Yes appears.
A page prints out.
Cleaning the printer
During the printing process, paper, toner, and dust particles can
accumulate inside the printer. This buildup can cause print quality
problems, such as toner specks or smearing. Your printer has a cleaning
mode that can correct and prevent these types of problems.
Caution
• Cleaning the cabinet of the printer with cleaning materials
containing large amounts of alcohol, solvents, or other strong
substances can discolor or crack the cabinet.
Cleaning the outside of the printer
Clean the cabinet of the printer with a soft, lint-free cloth. You can
dampen the cloth slightly with water, but be careful not to let any water
drip onto or into the printer.
Cleaning the inside of the printer
There are two methods to clean the inside of the printer:
• Clean the inside manually.
• Print a cleaning sheet, which can be done from the control panel.
Cleaning the inside of the printer manually
1
Turn the printer off and unplug the power cord. Wait for the printer
to cool down.
8.1
<Maintenance>
Download from Www.Somanuals.com. All Manuals Search And Download.
2
Open the top cover and pull the toner cartridge out. Set it on a
clean flat surface.
4
Gently swab the long strip of glass (LSU) inside the top of the
cartridge cavity and check for dirt or dust.
Note
Caution
• The long strip of glass is hard to locate.
• To prevent damage to the toner cartridge, do not expose it to
light for more than a few minutes. Cover it with a piece of
paper, if necessary.
5
Locate the PTL lens by flipping up the guide feed and gently swab
the lens with the pointed white cotton.
• Do not touch the green surface underside of the toner
cartridge. Use the handle on the cartridge to avoid touching
this area.
3
With a dry lint-free cloth, wipe away any dust and spilled toner from
the toner cartridge area and the toner cartridge cavity.
1
PTL lens
1
Caution
• While cleaning the inside of the printer, be careful not to touch
the transfer roller, located underneath the toner cartridge. Oil
from your fingers can cause print quality problems.
8.2
<Maintenance>
Download from Www.Somanuals.com. All Manuals Search And Download.
6
Clean a feed sensor with a cotton bud.
Maintaining the toner cartridge
Toner cartridge storage
To get the most from the toner cartridge, keep the following guidelines in
mind:
• Do not remove the toner cartridge from its package until ready for
use.
1
• Do not refill the toner cartridge. The printer warranty does not cover
damage caused by using a refilled cartridge.
• Store toner cartridge in the same environment as the printer.
• To prevent damage to the toner cartridge, do not expose it to light for
more than a few minute.
Expected cartridge yield
Feed Sensor
1
The toner cartridge yield depends on the amount of toner that print jobs
require. The actual number may also be different depending on the print
density of the pages you print on, and the number of pages may be
affected by operating environment, printing interval, media type, and
media size. If you print a lot of graphics, you may need to change the
cartridge more often.
7
8
Reinsert the toner cartridge and close the top cover.
Plug in the power cord and turn the printer on.
Printing a cleaning sheet
Saving toner
If you are experiencing blurred, faded, or smeared printouts, you can
clear the problem by printing a cleaning sheet, provided by your printer.
You can print:
To save toner, press Toner Save on the control panel. The button
backlight turns on.
• OPC cleaning sheet: cleans the OPC drum of the toner cartridge.
• Fuser cleaning sheet: cleans the fuser unit inside the printer.
Using this feature extends the life of the toner cartridge and reduce your
cost per page, but it also reduces print quality.
This process will produce a page with toner debris, which should be
discarded.
1
2
Make sure that the printer is turned on with paper loaded in the tray.
Press Menu until System Setup appears on the bottom line of the
display and press OK.
3
4
Press the Scroll buttons until Maintenance appears and press
OK.
Press the Scroll buttons until Clean Fuser or Clean Drum appears
and press OK.
Your printer automatically picks up a sheet of paper from the tray
and prints out a cleaning sheet with dust or toner particles on it.
8.3
<Maintenance>
Download from Www.Somanuals.com. All Manuals Search And Download.
1
2
Open the top cover.
Checking the remaining toner
Pull the toner cartridge out.
You can check the level of toner left in the cartridge.
If you are having print quality problems, this can help you determine if
the problem is caused by low toner.
1
2
3
4
Press Menu until System Setup appears on the bottom line of the
display and press OK.
Press the Scroll buttons until Maintenance appears and press
OK.
Press the Scroll buttons until Supplies Life appears and press
OK.
Press the Scroll buttons until Toner Remains appears and press
OK.
The display shows the percentage of the remaining toner.
Caution
• Avoid reaching too far into the printer. The fusing area may be
hot.
Note
While the following messages are appearing on the display, the
sub-menu(s) under Supplies Life can be changed:
• To prevent damage to the toner cartridge, do not expose it to
light for more than a few minutes. Cover it with a piece of
paper, if necessary.
- Invalid Toner, NonGenuine Toner, Replace Toner,
• Do not touch the green surface underside of the toner
cartridge. Use the handle on the cartridge to avoid touching
this area.
Toner Exhausted
Redistributing toner cartridge
3
Thoroughly shake the cartridge 5 or 6 times to distribute the toner
evenly inside the cartridge.
When the toner cartridge is near the end of its life:
• White streaks and light printing occur.
• Toner Low appears on the display.
• The Status LED blinks red.
If this happens, you can temporarily reestablish print quality by
redistributing the remaining toner in the cartridge. In some cases, white
streaks or light printing will still occur even after you have redistributed
the toner.
Note
• If toner gets on your clothing, wipe it off with a dry cloth and
wash clothing in cold water. Hot water sets toner into fabric.
8.4
<Maintenance>
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Hold the toner cartridge by the handle and slowly insert the
cartridge into the opening in the printer.
2
Pull the toner cartridge out.
Tabs on the sides of the cartridge and corresponding grooves
within the printer will guide the cartridge into the correct position
until it locks into place completely.
3
Remove the new toner cartridge from its bag.
5
Close the top cover. Make sure that the cover is securely closed.
Replacing the toner cartridge
When the toner cartridge is completely empty:
• Toner Empty appears on the display.
• The Status LED lights red.
At this stage, the toner cartridge needs to be replaced. For order
information for toner cartridges, see page 7.1.
Caution
1
Open the top cover.
• Do not use sharp objects, such as a knife or scissors, to open
the toner cartridge package. They might scratch the drum of
the cartridge.
8.5
<Maintenance>
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Locate the sealing tape at the end of the toner cartridge. Carefully
pull the tape completely out of the cartridge and discard it.
Caution
• If toner gets on your clothing, wipe it off with a dry cloth and
wash clothing in cold water. Hot water sets toner into fabric.
• To prevent damage to the toner cartridge, do not expose it to
light for more than a few minutes. Cover it with a piece of
paper, if necessary.
• Do not touch the green surface underside of the toner
cartridge. Use the handle on the cartridge to avoid touching
this area.
7
Hold the toner cartridge by the handle and slowly insert the
cartridge into the opening in the printer.
Tabs on the sides of the cartridge and corresponding grooves
within the printer will guide the cartridge into the correct position
until it locks into place completely.
Note
• The sealing tape should be longer than 60 cm when correctly
removed.
• Holding the toner cartridge, pull the sealing tape straight to
remove it form the cartridge. Be careful not to cut the tape. If
this happens, you cannot use the toner cartridge.
• Refer to the helpful pictures on the cartridge wrapping paper.
5
Remove the flexible plastic holder out of the toner cartridge.
6
Thoroughly shake the cartridge 5 or 6 times to distribute the toner
evenly inside the cartridge.
8
Close the top cover. Make sure that the cover is securely closed.
Thoroughly roll the cartridge to assure maximum copies per
cartridge. Save the box and the plastic bag for shipping.
8.6
<Maintenance>
Download from Www.Somanuals.com. All Manuals Search And Download.
Clearing the Toner Low Replace Toner message
When the Toner Low Replace Toner message appears you can
configure not to see this message again not to disturb you.
1
Press Menu until System Setup appears on the bottom line of the
display and press OK.
2
3
Press the Scroll buttons until Maintenance appears and press OK.
Press the Scroll buttons until CLR Empty Msg. appears and press
OK.
4
5
Select On and press OK.
Now the Toner Low Replace Toner message does not appear but
the Replace Toner message will remain for reminding you that the
new cartridge needs to be installed for quality.
Caution
•Once you have selected On, this setting will be permanently
written to the memory of the toner cartridge, and this menu will
be disappeared from the Maintenance menu.
Maintenance parts
To avoid print quality and paper feed problems resulting from worn parts
and to maintain your printer in top working condition, the following items
will need to be replaced when the specified number of pages have been
printed or when the life span of each item has expired.
Items
Transfer roller
Yield (Average)
150,000
150,000
150,000
150,000
Fuser unit
Paper feeding roller
Rubber pad
Samsung highly recommends that an authorized service provider, dealer
or the retailer where you bought printer performs this maintenance
activity.
8.7
<Maintenance>
Download from Www.Somanuals.com. All Manuals Search And Download.
Clearing paper jams
9 Troubleshooting
Note
This chapter provides helpful information for what to do if you encounter
an error while using your printer.
• When removing paper that is jammed in the printer, if possible
always pull the paper in the direction that it normally moves so
as not to damage internal components. Always pull firmly and
evenly; do not jerk the paper. If the paper tears, ensure that all
fragments of paper are removed; otherwise a jam will occur
again.
This chapter includes:
•
•
•
•
•
•
•
•
•
•
•
When a paper jam occurs, the Status LED lights red. Open and close
the top cover. The jammed paper automatically exits the printer.
If the paper does not exit, check the display on the control panel. The
message indicating the corresponding location of the paper jam
appears. Refer to the table below to locate the paper jam and to clear it:
Message
Location of Jam
Go To
Paper Jam 0
In the paper feed area
the next
column
Open/Close Door
(tray 1, optional tray 2,
optional tray 3, optional tray 4,
multi-purpose tray)
Paper Jam 1
Around the toner cartridge
page 9.3
page 9.4
page 9.3
page 9.2
page 9.2
page 9.2
Open/Close Door
Paper Jam 2
Check Inside
In the paper exit area
Paper Exit Jam 1
Open/Close Door
Between the toner cartridge
and the paper exit area
Paper Tray 2 Jam
Open Tray 2
In the optional tray 2
In the optional tray 3
In the optional tray 4
Paper Tray 3 Jam
Open Tray 3
Paper Tray 4 Jam
Open Tray 4
a
Duplex Jam 0
In the duplex area
In the duplex area
page 9.4
page 9.5
Check Inside
Duplex Jam 1
Open/Close Door
a. Available with the optional duplex unit in the ML-4550 and ML-4551N.
9.1
<Troubleshooting>
Download from Www.Somanuals.com. All Manuals Search And Download.
In the optional tray
In the paper feed area
1
2
Pull the optional tray open.
In the tray 1
Remove the jammed paper from the printer.
1
Pull the tray 1 open.
2
Remove the jammed paper by gently pulling it straight out. Make
sure that all of the paper is properly aligned in the tray 1.
If the paper does not move when you pull, or if you do not see the
paper in this area, stop and go to step 3.
3
4
Pull the upper tray half way out.
Pull the jammed paper straight up and out.
If the paper does not move when you pull, or if you do not see the
paper in this area, check the fuser area around the toner cartridge.
See page 9.3.
3
Insert the tray 1 into the printer until it snaps into place. Printing
automatically resumes.
5
Fully insert the trays back into the printer. Printing automatically
resumes.
9.2
<Troubleshooting>
Download from Www.Somanuals.com. All Manuals Search And Download.
2
Carefully lift up the guide feed.
In the multi-purpose tray
1 If the paper is not feeding properly, pull the paper out of the printer.
1
guide feed
1
3
Remove the jammed paper by gently pulling it straight out.
2
Open and close the top cover to resume printing.
Around the toner cartridge
Note
• The fuser area is hot. Take care when removing paper from the
printer.
1
Open the top cover and pull the toner cartridge out.
If you do not see the jammed paper or if there is any resistance
removing the paper, stop pulling and go to the paper exit area. See
4
Flip down the guide feed.
Caution
• To prevent damage to the toner cartridge, do not expose it to
light for more than a few minutes. Cover it with a piece of
paper, if necessary.
• Do not touch the green surface underside of the toner
cartridge. Use the handle on the cartridge to avoid touching
this area.
9.3
<Troubleshooting>
Download from Www.Somanuals.com. All Manuals Search And Download.
5
Replace the toner cartridge and close the top cover. Printing
automatically resumes.
In the duplex unit area
If the duplex unit is not inserted correctly, paper jam may occur. Make
sure that the duplex unit is inserted correctly.
Note
• If it is difficult to reinstall the toner cartridge, make sure that the
guide feed has been flipped back down into position.
In the ML-4550 and ML-4551N, the optional duplex unit should be
installed.
Duplex jam 0
In the paper exit area
1
Pull the duplex unit out of the printer.
1
Open and close the top cover. The jammed paper is automatically
ejected from the printer.
2
Gently pull the paper out of the output tray.
2
Locate the jammed paper and remove it.
If you do not see the jammed paper or if there is any resistance
when you pull, stop and go to the next step.
3
4
Open the rear cover.
By pusing the fuser levers upwards, loosen the jammed paper.
Then gently pull the paper straight out.
3
4
Insert the duplex unit into the slot.
Open and close the top cover. The printer will resume printing.
5
Put the fuser levers to their original position and close the rear
cover. Printing automatically resumes.
9.4
<Troubleshooting>
Download from Www.Somanuals.com. All Manuals Search And Download.
Duplex jam 1
1 Open the rear cover.
Troubleshooting checklist
If the printer is not working properly, consult the following checklist. If the
printer does not pass a step, follow the corresponding suggested
solutions.
Condition
Suggested solutions
Make sure that the
Status LED on the
control panel lights
green and Ready is
shown on the
• If the Status LED is off, check the power
cord connection. Check the power switch.
Check the power source by plugging the
power cord into another outlet.
• If the Status LED lights red, check the
display.
Print a demo page
to verify that the
printer is feeding
paper correctly. See
page 2.8.
• If a demo page does not print, check the
paper supply in the tray.
• If the paper jams in the printer, see page
9.1.
• If an error message appears on the
2
Gently pull the jammed paper straight up.
Check the demo
page to see if it
printed correctly.
If there is a print quality problem, see page
9.11.
Print a short
• If the page does not print, check the cable
connection between the printer and the
computer.
• Check the print queue or print spooler to
see if the printer has been paused.
• Check the software application to ensure
that you are using the proper printer driver
and communication port. If the page is
document from a
software application
to verify that the
computer and
printer are
connected and are
communicating
correctly.
3
4
Close the rear cover.
If completing the
checklist does not
resolve the printer
problem, check the
following
9.6.
page 9.6.
page 9.9.
Open and close the top cover. The printer will resume printing.
Tips for avoiding paper jams
troubleshooting
sections.
By selecting the correct media types, most paper jams can be avoided.
9.13.
are positioned correctly.
9.13.
• Do not overload the tray. Ensure that the paper level is below the
paper capacity mark on the inside wall of the tray.
9.14.
• Do not remove paper from the tray while your printer is printing.
• Flex, fan, and straighten paper before loading.
• Do not use creased, damp, or highly curled paper.
• Do not mix paper types in a tray.
.
• Ensure that the recommended print side of print media is facing down
in the tray, or facing up in the multi-purpose tray.
9.5
<Troubleshooting>
Download from Www.Somanuals.com. All Manuals Search And Download.
Understanding the status LED
Understanding display messages
Messages appear on the Smart Panel program window or the control
panel display to indicate the printer’s status or errors. Refer to the tables
below to understand the messages’ meaning and correct the problem if
necessary. Messages and their meanings are listed in alphabetical
order.
Status
Description
Off
• The printer is off-line and cannot print.
• The printer is in power save mode. When
data is received, it switches to on-line
automatically.
Note
• When you call for service, it is very convenient to tell the
service representative the display message.
Green
On
The printer is on-line and can receive data
from the computer.
Blinking
• When the backlight blinks slowly, the printer
is receiving data from the computer.
• When the backlight blinks quickly, the printer
is printing data.
Message
ADC Not
Meaning
Suggested solutions
There is a problem
in your printer
system.
Unplug the power
cord and plug it back
in. If the problem
persists, please call
for service.
Confirm Error
Red
On
• The toner is totally exhausted. Remove the
old toner cartridge and install a new one.
See page 8.5.
• A paper jam has occurred. To solve the
• The top cover is open. Close the top cover.
• There is no paper in the tray. Load paper in
the tray.
• The toner cartridge installed is not a genuine
cartridge, and you selected Stop at the
• The lifespan of the toner cartridge is
reached, and you selected Stop at the
• The printer has stopped printing due to a
major error. Check the display message.
the error message.
Door Open
The top cover or rear
cover is not securely
latched.
Close the cover until
it locks into place.
Duplex Jam 0
Check Inside
Paper has jammed
during duplex
printing.
Clear the jam. See
page 9.4.
Duplex Jam 1
Open/Close Door
Paper has jammed
during duplex
printing.
Clear the jam. See
page 9.5.
Fuser Door Open
Fuser is Cleaning
The fuser door is not
securely latched.
Open the rear cover
and close the fuser
door until it locks into
place.
Your printer is
printing a Cleaning
sheet now.
Please wait a few
minutes.
Blinking
• A minor error is occurring and the printer is
waiting for the error to be cleared. Check the
display message. When the problem is
cleared, the printer resumes printing.
• The toner cartridge is low. Order a new toner
cartridge. You can temporarily improve print
quality by redistributing the toner. See page
8.4.
Inner Temp. Open
Cycle Power
There is a problem
in your printer
system.
Unplug the power
cord and plug it back
in. If the problem
persists, please call
for service.
Inner Temp. Error
Cycle Power
There is a problem
in your printer
system.
Unplug the power
cord and plug it back
in. If the problem
persists, please call
for service.
9.6
<Troubleshooting>
Download from Www.Somanuals.com. All Manuals Search And Download.
Message
Load
Meaning
Suggested solutions
Message
Meaning
Suggested solutions
The paper size
specified in the
printer properties
does not match the
paper you are
loading.
Load the correct
paper in the tray.
Paper Jam 0
Paper has jammed
in the feeding area
of the tray.
Clear the jam. See
page 9.2.
[Size] In [Tray]
Open/Close Door
Paper Jam 1
Paper has jammed
in the fuser area.
Clear the jam. See
page 9.3.
Open/Close Door
Load Manual
Press Cont Key
The multi-purpose
tray is empty in
manual feed mode.
Load a sheet of print
There are toner
powders on a feed
sensor.
Clean a feed sensor.
media and press OK
You need to press
OK each page to be
printed.
.
Paper Jam 2
Check Inside
Paper has jammed
in the paper exit
area.
Clear the jam. See
page 9.4.
Low Heat Error
Cycle Power
There is a problem
in the fuser unit.
Unplug the power
cord and plug it back
in. If the problem
persists, please call
for service.
Paper [Tray] Jam
Open [Tray]
Paper has jammed
in the displayed
optional tray.
Clear the jam. See
page 9.2.
LSU Motor Error
Cycle Power
A problem has
occurred in the LSU
(Laser Scanning
Unit).
Unplug the power
cord and plug it back
in. If the problem
persists, please call
for service.
Printing...
Ready
The printer is
printing jobs.
Complete your
printing.
The printer is on-line
and ready to print.
Use your printer.
MP Tray
There is no paper in
the multi-purpose
tray.
Load paper in the
multi-purpose tray.
Self Diagnostic
LSU
The LSU (Laser
Scanning Unit) in
your printer is
Please wait a few
minutes.
Paper Empty
checking some
problems detected.
OPC is Cleaning
Your printer is
printing a cleaning
sheet now.
Please wait a few
minutes.
Self Diagnostic
Temperature
The engine in your
printer is checking
some problems
detected.
Please wait a few
minutes.
Open Heat Error
Cycle Power
There is a problem
in the fuser unit.
Unplug the power
cord and plug it back
in. If the problem
persists, please call
for service.
Sleeping...
The printer is in
power save mode.
When data is
received, it switches
to on-line
Out-Bin Full
The output tray is
full.
It can hold up to 250
sheets of plain paper.
Once the paper is
removed from the
output tray, the
automatically.
[Tray]
The displayed tray is
open.
Close the tray until it
locks into place.
Cassette Out
printer resumes
printing.
[Tray]
There is no paper in
the tray.
Load paper in the
tray. See page 5.5.
Paper Empty
Over Heat Error
Cycle Power
There is a problem
in the fuser unit.
Unplug the power
cord and plug it back
in. If the problem
persists, please call
for service.
Warming Up
Please Wait...
Your printer is
warming up now.
Please wait a few
minutes.
Paper Exit Jam 1
Open/Close Door
Paper has jammed
before reaching to
the exit sensor.
Clear the jam. See
9.7
<Troubleshooting>
Download from Www.Somanuals.com. All Manuals Search And Download.
Toner cartridge-related messages
Message
Install Toner
Invalid Toner
Meaning
Suggested solutions
A toner cartridge is not installed.
Install a toner cartridge.
The toner cartridge you have
Install a Samsung-genuine toner cartridge, designed for your printer.
installed is not for your printer.
Toner Low
The toner cartridge is almost
empty.
Take out the toner cartridge and thoroughly shake it. By doing this, you can temporarily
reestablish printing operations.
NonGenuine Toner
Stop
The toner cartridge installed is not
a genuine cartridge.
You can select either Stop or Continue. If you do not select any, the printer will work as
Stop is selected.
If you select Stop, you cannot print until the genuine cartridge is installed. However, you
can still print any kind of reports.
If you select Continue, you can keep printing but the quality cannot be guaranteed, and the
product support is no longer provided.
If you want to change the selection, turn the printer off and on to have this message appear
again, and then re-select Stop or Continue.
NonGenuine Toner
Replace Toner1
The toner cartridge installed is not
a genuine cartridge.
This message appears when you selected Stop at the NonGenuine Toner prompt.
Install the genuine toner cartridge.
NonGenuine Toner
Replace Toner
The toner cartridge installed is not
a genuine cartridge.
This message appears when you selected Continue at the NonGenuine Toner prompt.
Install the genuine toner cartridge.
Toner Low
The toner in the cartridge has run
out.
Install a new genuine toner cartridge.
Replace Toner
You can keep printing but the quality cannot be guaranteed, and the product support is no
longer provided.
Replace Toner
The toner in the cartridge has run
out.
Install a new genuine toner cartridge.
You can keep printing but the quality cannot be guaranteed, and the product support is no
longer provided.
Toner Exhausted
Stop
The lifespan of the toner cartridge
is reached.
You can select either Stop or Continue. If you do not select any, the printer will work as
Stop is selected.
If you select Stop, you cannot print until the genuine cartridge is installed.
If you select Continue, you can keep printing but the quality cannot be guaranteed, and the
product support is no longer provided.
If you want to change the selection, turn the printer off and on to have this message appear
again, and then re-select Stop or Continue.
Toner Exhausted
Replace Toner1
The lifespan of the toner cartridge
is reached.
This message appears when you selected Stop at the Toner Exhausted prompt.
Install the genuine toner cartridge.
Toner Exhausted
Replace Toner
The lifespan of the toner cartridge
is reached.
This message appears when you selected Continue at the Toner Exhausted prompt.
Install the genuine toner cartridge.
9.8
<Troubleshooting>
Download from Www.Somanuals.com. All Manuals Search And Download.
Condition
Possible cause
Suggested solutions
Solving general printing problems
The printer
does not
print.
The printer may
be configured
incorrectly.
Check the printer properties to
ensure that all of the print
settings are correct.
For problems with the operation of your printer, refer to the table for
suggested solutions.
(Continued)
Condition
Possible cause
Suggested solutions
The printer driver
may be
incorrectly
installed.
Reinstall the printer driver; See
the Software Section. Try
printing a test page.
The printer
does not
print.
The printer is not
receiving power.
Check the power cord
connections. Check the power
switch and the power source.
The printer is
malfunctioning.
Check the display message on
the control panel to determine if
the printer is indicating a
system error.
The printer is not
selected as the
default printer.
Select Samsung ML-4550
Series PCL 6 or Samsung ML-
4550 Series PS as your default
printer.
Printer
The paper source
selection in the
printer properties
may be incorrect.
For many software
The printer cover
is not closed.
Close the printer cover.
selects print
media from
the wrong
paper
applications, the paper source
selection is found under the
Paper tab within the printer
properties. Select the correct
paper source. See the
Paper is jammed. Clear the paper jam. See page
9.1.
source.
Software Section.
No paper is
loaded.
Load paper. See page 5.4.
Install the toner cartridge.
Paper does
not feed into
the printer.
Paper has not
been loaded
correctly.
Remove paper from the tray
and reload it correctly.
The toner
cartridge is not
installed.
Check that the paper size
guides are set correctly.
There is too much
paper in the tray.
Remove excess paper from the
tray.
The printer may
be in manual feed
mode and out of
paper.
Check the display message,
add paper to the multi-purpose
tray, and press OK on the
printer’s control panel.
The paper is too
thick.
Use only paper that meets
printer specifications.
The connection
cable between
the computer and
the printer is not
connected
Disconnect the printer cable
and reconnect it.
Print job is
extremely
slow.
The job may be
very complex.
Reduce the complexity of the
page(s) or try adjusting the
print quality settings.
To adjust the print quality
settings, reduce the resolution.
If you have set the resolution to
1200 dpi (Best), change it to
600 dpi (Normal). See the
Software Section.
properly.
The connection
cable between
the computer and
the printer is
If possible, attach the cable to
another computer that is
working properly and try to print
a document. You can also try
using a different printer cable.
Change the port setting to the
USB or network port to improve
print speed.
defective.
The port setting is
incorrect.
Check the Windows printer
setting to make sure that the
print job is sent to the correct
port. If the computer has more
than one port, make sure that
the printer is attached to the
correct one.
Your printer prints A4-sized
paper at 43 ppm and letter-
sized paper at 45 ppm. If you
use the ML-4551ND and install
an option duplex unit in the ML-
4550 or ML-4551N, your printer
prints A4-sized paper at 29 ipm
and letter-sized paper at 30 ipm
in the duplex printing mode.
9.9
<Troubleshooting>
Download from Www.Somanuals.com. All Manuals Search And Download.
Condition
Possible cause
Suggested solutions
Condition
Possible cause
Suggested solutions
Print job is
extremely
slow.
If using Windows From the Start menu, choose
The printer
prints, but
the text is
wrong,
garbled, or
incomplete.
The printer cable
is loose or
defective.
Disconnect and reconnect the
printer cable. Try a print job that
you have already printed
successfully. If possible, attach
the cable and printer to another
computer and try a print job
that you know works. Finally,
try a new printer cable.
98/Me, the
Settings and Printers. Right-
click the Samsung ML-4550
Series PCL 6 printer icon,
choose Properties, click the
Details tab, and then choose
the Spool Settings button.
Select the desired spool
setting.
Spooling Setting
may be set
(Continued)
incorrectly.
The wrong printer Check the application’s printer
The computer
may have
Install more memory in your
driver was
selected.
selection menu to ensure that
your printer is selected.
insufficient
random-access
memory (RAM).
The software
application is
malfunctioning.
Try printing a job from another
application.
Half the page The page layout
Simplify the page layout and
remove any unnecessary
graphics from the document.
The operating
system is
malfunctioning.
If printing from Windows (any
version), exit to a DOS prompt
and verify functionality with the
following command: At a C:\
prompt, type Dir LPT1, and
press Enter. (This assumes
you are connected to LPT1.)
is blank.
is too complex.
Install more memory in your
The page
Change the page orientation in
orientationsetting your application. See the
may be incorrect. Software Section.
Exit Windows and reboot the
computer. Turn the printer off
and then back on again.
The paper size
and the paper
size settings do
not match.
Ensure that the paper size in
the printer driver settings
matches the paper in the tray.
Pages print,
but are
blank.
The toner
Redistribute the toner
cartridge is
defective or out of
toner.
Or, ensure that the paper size
in the printer driver settings
matches the paper selection in
the software application
settings you use.
If necessary, replace the toner
The file may have Check the file to ensure that it
blank pages. does not contain blank pages.
The paper
keeps
jamming.
There is too much Remove excess paper from the
Some parts, such Contact a service
paper in the tray.
tray.
as the controller
or the board, may
be defective.
representative.
If printing on special media,
use the multi-purpose tray and
open the rear cover.
The
illustrations
print
incorrectly in wrong.
Adobe
Illustrator.
The setting in the Select Download as Bitmap in
An incorrect type
of paper is being
used.
Use only paper that meets
printer specifications.
software
the Advanced Options window
of the graphic properties. Print
the document again.
application is
If printing on special media,
use the multi-purpose tray and
open the rear cover.
An incorrect
output method is
being used.
Special print media, such as
thick paper, should not be
printed using the output tray
(face-down). Use the rear
cover (face-up) instead.
There may be
debris inside the
printer.
Open the top cover and
remove the debris.
9.10
<
Troubleshooting>
Download from Www.Somanuals.com. All Manuals Search And Download.
Condition
Dropouts
Suggested solutions
Solving print quality problems
If generally rounded, faded areas occur
randomly on the page:
Dirt inside of the printer or improper paper loading may reduce print
quality. See the table below to troubleshoot problems.
• A single sheet of paper may be defective. Try
reprinting the job.
AaBbCc
AaBbCc
AaBbCc
AaBbCc
AaBbCc
Condition
Suggested solutions
• The moisture content of the paper is uneven
or the paper has moist spots on its surface.
• The paper lot is bad. The manufacturing
processes can cause some areas to reject
toner. Try a different kind or brand of paper.
• The toner cartridge may be defective. See
“Vertical repetitive defects” on the next page.
• If these steps do not correct the problems,
contact a service representative.
Light or faded
print
If a vertical white streak or faded area appears
on the page:
• The toner supply is low. You may be able to
temporarily extend the toner cartridge life. See
install a new toner cartridge.
• The paper may not meet paper specifications
(for example, the paper is too moist or too
rough). See page 5.3.
AaBbCc
AaBbCc
AaBbCc
AaBbCc
AaBbCc
• If the entire page is light, the print resolution
setting is too light or toner save mode is on.
Adjust the print resolution and toner save
mode in the printer properties. See the
Software Section.
• If the entire page is faded with "Toner Low
Replace Toner" message on LCD,
set "CLR Empty Msg." to "On" referring to
but the quality cannot be guaranteed, and the
product support is no longer provided.
• A combination of faded or smeared defects
may indicate that the printer needs cleaning.
Vertical lines
If black vertical streaks appear on the page:
• The drum inside the toner cartridge has
probably been scratched. Install a new toner
AaBbCc
AaBbCc
AaBbCc
AaBbCc
AaBbCc
If white vertical streaks appear on the page:
• The surface of the LSU part inside the printer
Gray
background
If the amount of background shading becomes
unacceptable, the procedures below may fix the
problem.
• Check the printer’s environment; very dry (low
humidity) or high humidity (higher than 80%
RH) conditions can increase the amount of
background shading.
AaBbCc
AaBbCc
AaBbCc
AaBbCc
AaBbCc
• The surface of LSU may be dirty. Clean the
LSU. See page 8.2.
Toner spots
• The paper may not meet specifications (for
example, the paper is too moist or too rough).
• The transfer roller or paper path may be dirty.
• Remove the old toner cartridge and install a
AaBbCc
AaBbCc
AaBbCc
AaBbCc
AaBbCc
Toner smear
• Remove the toner cartridge and install a new
9.11
<
Troubleshooting>
Download from Www.Somanuals.com. All Manuals Search And Download.
Condition
Vertical
repetitive
defects
Suggested solutions
Condition
Suggested solutions
If marks repeatedly appear on the printed side of
the page at even intervals:
Curl or wave
• Ensure that the paper is loaded properly.
• Check the type and quality. Both high
temperature and humidity can cause paper
• Turn over the stack of paper in the tray. Also
try rotating the paper 180° in the tray.
• Try printing to the rear cover (face-up).
• The toner cartridge may be damaged. If a
repetitive mark occurs on the page, print a
cleaning sheet several times to clean the
you still have the same problems, install a new
• Parts of the printer may have toner on them. If
the defects occur on the back of the page, the
problem will likely correct itself after a few
more pages.
AaBbCc
AaBbCc
AaBbCc
AaBbCc
AaBbCc
Wrinkles or
creases
• Ensure that the paper is loaded properly.
• Check the paper type and quality. See page
5.2.
• Open the rear cover and try printing to the rear
cover (face-up).
• The fusing assembly may be damaged.
Contact a service representative.
Background
scatter
Background scatter results from bits of toner
distributed on the printed page.
• Turn over the stack of paper in the tray. Also
try rotating the paper 180° in the tray.
• The paper may be too damp. Try printing with
a different batch of paper. Do not open
packages of paper until necessary so that the
paper does not absorb too much moisture.
• If background scatter occurs on an envelope,
change the printing layout to avoid printing
over areas that have overlapping seams on
the reverse side. Printing on seams can cause
problems.
• If background scatter covers the entire
surface area of a printed page, adjust the print
resolution through your software application or
via the printer properties window.
Back of
printouts are
dirty
• Check for leaking toner. Clean the inside of
the printer.
A
Misformed
characters
• If characters are improperly formed and
producing hollowed images, the paper stock
may be too slick. Try a different paper. See
page 5.3.
• If characters are improperly formed and
producing a wavy effect, the scanner unit may
need service. Verify that it also occurs on a
contact a service representative.
Solid color or
Black pages
• The toner cartridge may not be installed
properly. Remove the cartridge and reinsert.
• The toner cartridge may be defective and
need replacing. Install a new toner cartridge.
• The printer may require repair. Contact a
service representative.
Page skew
• Ensure that the paper is loaded properly.
• Check the paper type and quality. See page
5.2.
• Ensure that the paper or other media is loaded
correctly and the guides are not too tight or
too loose against the paper stack.
Loose toner
• Clean the inside of the printer.
• Check the paper type and quality. See page
5.2.
• If the problem persists, the printer may require
repair. Contact a service representative.
9.12
<
Troubleshooting>
Download from Www.Somanuals.com. All Manuals Search And Download.
Condition
Suggested solutions
Condition
Suggested solutions
Character Voids Character voids are white areas within
“Error Writing to
LPTx” message
appears.
• Ensure that the cables are connected
correctly, the printer is on.
• If bi-directional communication is not turned
on in the driver, it will also cause this
message.
characters that should be solid black:
• If you are using transparencies, try another
type of transparency. Because of the
composition of the transparency, some
character voids may be normal.
• You may be printing on the wrong surface on
the paper. Remove the paper and turn it
around.
• The paper may not meet paper specifications.
A
“General Protection Close all other applications, reboot Windows,
Fault”, “Exception
OE”, “Spool32”, or
“Illegal Operation”
messages appear.
and try printing again.
“Fail To Print,” “A
printer timeout error Just keep waiting until the printer finishes
occurred,”
messages appear.
These messages may appear during printing.
Horizontal
stripes
If horizontally aligned black streaks or smears
appear:
printing. If the message appears in standby
mode or after printing has been completed,
check the connection and/or whether an error
has occurred.
• The toner cartridge may be installed
improperly. Remove the cartridge and
reinsert.
• The toner cartridge may be defective. Install a
• If the problem persists, the printer may require
repair. Contact a service representative.
AaBbCc
AaBbCc
AaBbCc
AaBbCc
AaBbCc
Note
• Refer to Microsoft Windows 98/Me/NT 4.0/2000/XP/2003
User’s Guide that came with your PC for further information on
Windows error messages.
Curl
If the printed paper is curled or paper does not
feed into the printer:
• Turn over the stack of paper in the tray. Also
try rotating the paper 180° in the tray.
• Try printing to rear cover (face up).
Common PostScript problems
The following situations are PostScript language specific and may occur
when several printer languages are being used.
Note
An unknown
Your printer is probably being used at an altitude
• To receive a printed or screen displayed message when
PostScript errors occur, open the Print Options window and
click the desired selection next to the PostScript errors section.
imagerepetitively of 2,500 m (8,200 ft) or above.
appears on a
The high altitude may affect the print quality
next few sheets
or loose toner,
light print or
contamination
occurs.
such as loose toner or light imaging. You can set
this option through Printer Settings Utility or
Printer Tab in printer driver’s properties. Refer
to the Software Section for details.
Condition
Possible cause
Suggested solutions
PostScript file
can not be
printed.
ThePostScript • Print a configuration page
driver may not
be installed
correctly.
and verify that the PostScript
version is available for
printing.
• Install the PostScript driver;
to installing the PS printer
driver, see the Software
Section.
Common Windows problems
Condition
Suggested solutions
• If problem consists, contact a
service representative.
“File in Use”
message appears
during installation.
Exit all software applications. Remove all
software from the StartUp Group, then restart
Windows. Reinstall the printer driver.
“Limit Check
Error” message was too
appears.
The print job
You might need to reduce the
complexity of the page or install
more memory.
complex.
9.13
<
Troubleshooting>
Download from Www.Somanuals.com. All Manuals Search And Download.
Condition
Suggested solutions
Condition
Possible cause
Suggested solutions
Please avoid changing print job parameters
(via LPR GUI, for example) while a print job is
in progress. Known versions of CUPS server
break the print job whenever print options are
changed and then try to restart the job from
the beginning. Since Unified Linux Driver
locks mfp port while printing, the abrupt
termination of the driver keeps the port locked
and therefore unavailable for subsequent print
jobs. If this situation occurred, please, try to
release the mfp port.
A PostScript
error page
prints.
Print job may
not be
PostScript.
Make sure that the print job is a
PostScript job. Check to see
whether the software
application expected a setup or
PostScript header file to be sent
to the printer.
I encounter error
“Unable to open
mfp port device
file!” when printing
a document.
The optional
tray 2 (tray 3 or driver has not
tray 4) is not
selected in the
driver.
The printer
Open the PostScript driver
properties, select the Device
Settings tab, and set the Tray2
(Tray3 or Tray4) option of the
Installable Options section to
been
configured to
recognize the
optional tray 2 Installed.
(tray 3 or tray
4).
Common Macintosh problems
When print a
document in
Macintosh with printer driver
AcrobatReader may not be
6.0 or higher,
colors print
incorrectly.
The resolution Make sure that the resolution
Condition
Suggested solutions
setting in the
setting in your printer driver
matches that in Acrobat
Reader.
The printer does not
print a document from
Acrobat Reader.
Change the Print Method option to Print
as Image when you print from Acrobat
Reader.
matched with
that in Acrobat
Reader.
The document has
Update your Mac OS to OS 10.3.3 or
printed, but the print job higher.
has not disappeared
from the spooler in Mac
OS 10.3.2.
Common Linux problems
The printer does not
print a document from
Illustrator on IPP
printing.
Change the Data type option in the
Adobe Illustrator print menu to Binary.
Condition
Suggested solutions
• Check if the printer driver is installed in your
system. Open Unified Driver Configurator
and switch to the Printers tab in Printers
configuration window to look at the list of
available printers. Make sure that your
machine is displayed on the list. If not,
please, invoke Add new printer wizard to set
up your device.
• Check if the printer is started. Open Printers
configuration and select your machine on
the printers list. Look at the description in
the Selected printer pane. If its status
contains “(stopped)” string, please, press
the OK button. After that normal operation
of the printer should be restored. The
"stopped" status might be activated when
some problems in printing occurred.
Or, you can use Appletalk printing.
The printer doesn’t
print.
9.14
<
Troubleshooting>
Download from Www.Somanuals.com. All Manuals Search And Download.
Precautions when installing accessories
10 Installing accessories
Your printer is a full-featured laser printer that has been optimized to
meet the majority of your printing needs. Recognizing that each user
may have different requirements, however, Samsung makes several
accessories available to enhance the printer’s capabilities.
Disconnect the power cord:
Never remove the control board cover while the printer is plugged in.
To avoid the possibility of an electrical shock, always disconnect the
power cord when installing or removing ANY internal or external
accessories.
This chapter includes:
•
•
•
•
Discharge static electricity:
The control board and internal accessories (network interface card,
DIMM, and hard disk) are sensitive to static electricity. Before installing
or removing internal accessories, discharge static electricity from your
body by touching something metal, such as the metal back plate on any
device plugged into a grounded power source. If you walk round before
finishing installation, discharge any static electricity once again.
Installing a dual in-line memory module (DIMM)
Your printer has a dual in-line memory module (DIMM) slot. Use this
DIMM slot to install additional memory.
Your printer has 128 MB of memory which can be expanded to 512 MB.
1
Turn the printer power off and unplug the power cord and printer
cable from the printer.
2
Remove the duplex-slot cover or the duplex unit from the back of
the printer.
1
duplex-slot cover
1
10.1
<Installing accessories>
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Grasp the control board cover and remove it.
7
Close the control board cover by aligning the groove on it with the
notch on the printer and sliding it.
4
5
Take out a new DIMM from its plastic bag.
8
9
Reinstall the duplex-slot cover or the duplex unit.
Locate the extra DMM slot and align the notch on the DIMM with
the groove at the DIMM slot, holding the DIMM by its edges.
Reconnect the power cord and printer cable, and turn the printer
on.
Setting the memory in the PostScript printer
properties
After installing the DIMM, you need to select it in the printer properties of
the PostScript printer driver to enable its use.
1
Make sure that the PostScript printer driver is installed on your
computer. To install the PostScript printer driver, see the Software
Section.
1
2
2
3
Click the Windows Start menu.
For Windows 98/Me/NT 4.0/2000, select Settings and then
Printers.
For Windows XP/2003, select Printers and Faxes.
notch
1
2
groove
4
5
Select the Samsung ML-4550 Series PS printer.
Click the right mouse button on the printer icon and select
Properties.
6
Push the DIMM into the printer until it snaps into place. Make sure
that the latches fit over the notches located on either side of the
DIMM.
6
7
For Windows 98/Me, select the Device Option tab.
For Windows NT 4.0/2000/XP/2003, select the Device Settings
tab.
Select the amount of memory you installed from Printer Memory in
the Installable Options section.
For Windows 98, select Installable Options → VMOption →
change setting for:NMOption → change memory.
8
Click OK.
10.2
<Installing accessories>
Download from Www.Somanuals.com. All Manuals Search And Download.
2
Remove the duplex-slot cover or the duplex unit from the back of
the printer.
Removing a DIMM
To expand the printer memory to 512 MB, you need to remove the
preinstalled 128 MB DIMM and install two 256 MB DIMMs into the DIMM
slots.
Push the latches at both ends of the DIMM slot away to remove the
DIMM and pull out the DIMM.
1
duplex-slot cover
1
1
2
3
Grasp the control board cover and remove it.
latch
1
2
DIMM
Installing a network interface card
The ML-4551N and ML-4551ND are equipped with wired network
interface cards, allowing you to use your printer on a network.
To use the ML-4550 in network environments, you need to buy an
optional network interface card. For order information, see page 7.1.
Note
• Knowing the connectors’ name and location will make it
easy to install the accessories.
install a network interface card in your printer.
1
2
1
Turn the printer power off and unplug the power cord and printer
cable from the printer.
hard disk connector
1
2
wired network connector
10.3
<Installing accessories>
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Align the connector on the wired network interface card with the
connector on the control board. Push the card firmly into the
connector on the control board until it is completely and securely in
place.
Using the hard disk
Installing the hard disk allows the data from your computer to be sent to
the print queue of the printer hard disk. This decreases the workload of
the computer. You can also use various print features, such as storing a
job in the hard disk, proofing a job, and printing private documents.
1
2
Installing the hard disk
For order information, see page 7.1.
Review the precautions on page 10.1.
1
Turn the printer power off and unplug the power cord and printer
cable from the printer.
2
Remove the duplex-slot cover or the duplex unit from the back of
the printer.
wired network connector
1
2
wired network interface card
5
Insert and tighten the two screws supplied with your network card.
1
duplex-slot cover
1
3
Grasp the control board cover and remove it.
6
Close the control board cover by aligning the groove on it with the
notch on the printer and sliding it.
7
8
Reinstall the duplex-slot cover or the duplex unit.
Reconnect the power cord and printer cable (if necessary), and turn
the printer on.
10.4
<Installing accessories>
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Align the connector on the hard disk with the connector on the
control board. Push the hard disk in until it is latched into place.
Setting the hard disk in the printer properties
After installing the hard disk, you need to select it in the printer properties
to enable its use. Take the following steps:
1
2
Click the Windows Start menu.
For Windows 98/Me/NT 4.0/2000, select Settings and then
Printers.
For Windows XP/2003, select Printers and Faxes.
3
4
5
Select the Samsung ML-4550 Series PCL 6 printer icon or
Samsung ML-4550 Series PS printer icon.
Click the right mouse button on the printer icon and select
Properties.
In PCL 6 Properties, click the Printer tab and then check Optional
Hard Disk Drive (HDD).
5
Fasten the four screws supplied with your new hard disk.
In PS Properties, click the Device Option or Device Settings tab
and set the Optional Hard Disk Drive (HDD) option to Installed.
6
Click OK.
6
Close the control board cover by aligning the groove on it with the
notch on the printer and sliding it.
7
8
Reinstall the duplex-slot cover or the duplex unit.
Reconnect the power cord and printer cable, and turn the printer
on.
9
Print a configuration page from the control panel to check if the
10.5
<Installing accessories>
Download from Www.Somanuals.com. All Manuals Search And Download.
2
3
Press the Scroll buttons until Store Job appears and press OK.
Printing with the optional hard disk
Press the Scroll buttons until the user’s name and file name you
want appear and press OK.
After installing the optional hard disk, you can use advanced printing
features, such as storing or spooling a print job to the hard disk, proofing
a job, and specifying of printing a private job in the printer properties
window.
4
If the select file is a confidential print job, enter the specified 4-digit
password.
Once you have stored files in the hard disk, you can easily print or delete
the stored files using the control panel of your printer.
Press the Scroll buttons to enter the first digit and press OK. The
cursor automatically moves to the next digit position. Enter the 2nd,
3rd, and 4th digit in the same way.
Setting the time and date
5
When Print appears, press OK.
1
Press Menu until System Setup appears on the bottom line of the
display and press OK.
If you enter the incorrect password, Invalid Password appears.
Reenter the correct password.
2
3
Press OK when Date & Time appears.
6
7
Press the Scroll buttons until the number of copies you want
appears and press OK.
Press the Scroll buttons until the digit you want appears and press
OK.
Press OK. Printing starts.
You can enter from 2000 to 2065 in the year input section. The
cursor moves to the next position.
Deleting a stored job
4
5
Repeat step 3 until all digits appear correctly.
You can delete jobs currently stored in the hard disk.
Press OK.
1
Press Menu until Job Manage. appears on the bottom line of the
display and press OK.
Storing a job
2
3
Press the Scroll buttons until Store Job appears and press OK.
You can store jobs in the installed hard disk.
Press the Scroll buttons until the user’s name and file name you
want appear and press OK.
1
2
3
Open the file you want to store.
Select Print from the File menu. The Print window displays.
4
If the select file is a confidential print job, enter the specified 4-digit
password.
Click Properties. If you see Setup, Print or Options, click the
button instead.
Press the Scroll buttons to enter the first digit and press OK. The
cursor automatically moves to the next digit position. Enter the 2nd,
3rd, and 4th digit in the same way.
4
5
Click the Extra tab and click Print and Hold.
Select the print mode you want from the drop-down list.
• Normal: prints in normal mode.
5
6
Press the Scroll buttons until Delete appears and press OK.
If you enter the incorrect password, Invalid Password appears.
Reenter the correct password.
• Proof: prints the first file and after a pause prints the next file.
• Confidentical: stores the files, securing them with a password.
• Store: stores the file to the hard disk.
When Yes appears, press OK.
• Spool: spools the file into the hard disk and prints it from the hard
disk queue.
• Delay: prints the file at a specified time.
Enter the user’s name and file name.
Click OK until the Print window is displayed.
Click OK or Print to start printing.
6
7
8
Printing a stored job
You can print jobs currently stored in the hard disk.
1
Press Menu until Job Manage. appears on the bottom line of the
display and press OK.
10.6
<Installing accessories>
Download from Www.Somanuals.com. All Manuals Search And Download.
3
4
Press the Scroll buttons until the user’s name and file name you
want appear and press OK.
Controlling the active job queue
All of the print jobs waiting to be printed are listed in the Active Job
Queue in the order you sent them to the printer. You can delete a job
from the queue before printing, or promote a job to print sooner.
If the select file is a confidential print job, enter the specified 4-digit
password.
To delete a file from the queue:
Press the Scroll buttons to enter the first digit and press OK. The
cursor automatically moves to the next digit position. Enter the 2nd,
3rd, and 4th digit in the same way.
1
Press Menu until Job Manage. appears on the bottom line of the
display and press OK.
5
Press the Scroll buttons until Release appears and press OK.
2
3
Press the Scroll buttons until Active Job appears and press OK.
This option appears only when you select a Delay print job. See
page 10.6.
Press the Scroll buttons until the user’s name and file name you
want appear and press OK.
If you enter the incorrect password, Invalid Password appears.
Reenter the correct password.
4
If the select file is a confidential print job, enter the specified 4-digit
password.
Printing using the form files
Press the Scroll buttons to enter the first digit and press OK. The
cursor automatically moves to the next digit position. Enter the 2nd,
3rd, and 4th digit in the same way.
You can store up to 10 form files in the hard disk and make them printed
with your document.
First, you need to create a form file using the printer driver. See the
Software Section.
5
6
Press the Scroll buttons until Cancel appears and press OK.
If you enter the incorrect password, Invalid Password appears.
Reenter the correct password.
1
Press Menu until System Setup appears on the bottom line of the
display and press OK.
Press the Scroll buttons until Yes appears and press OK.
2
3
Press the Scroll buttons until Form Menu appears and press OK.
To promote a file from the queue:
Press the Scroll buttons until the form you want appears and press
OK.
You can select a job waiting in the Active Job Queue and change its print
order so that it can be printed sooner.
• Off: prints in normal mode.
1
Press Menu until Job Manage. appears on the bottom line of the
display and press OK.
• Single Form: prints all page using the first form.
• Double Form: prints the front page using the first form and the
back page using the second form.
2
3
Press the Scroll buttons until Active Job appears and press OK.
Press the Scroll buttons until the user’s name and file name you
want appear and press OK.
4
5
6
7
Press Back to return to the upper menu level.
Press the Scroll buttons until Select Form appears and press OK.
Press OK when 1st Form appears.
4
If the select file is a confidential print job, enter the specified 4-digit
password.
Press the Scroll buttons to enter the first digit and press OK. The
cursor automatically moves to the next digit position. Enter the 2nd,
3rd, and 4th digit in the same way.
Press the Scroll buttons until the form file you want appears and
press OK.
If you select Double Form, continue the next step.
5
Press the Scroll buttons until Promote appears and press OK.
8
9
Press the Scroll buttons until 2nd Form appears and press OK.
If you enter the incorrect password, Invalid Password appears.
Reenter the correct password.
Press the Scroll buttons until the form file for the second form
appears and press OK.
To print a file immediately:
You can print a job scheduled to be printed at a specified time
immediately. In this case, the job currently printing is stopped and the
selected job will be printed. This function is available when the job is
scheduled for later printing.
1
Press Menu until Job Manage. appears on the bottom line of the
display and press OK.
2
Press the Scroll buttons until Active Job appears and press OK.
10.7
<Installing accessories>
Download from Www.Somanuals.com. All Manuals Search And Download.
Printer specifications
11 Specifications
Item
Specifications and Description
a
Printing speed
Up to 43 ppm in A4 (45 ppm in Letter)
Duplex: 29 ipm (A4); 30 ipm (Letter)
Resolution
Up to 1200 x 1200 dpi
Less than 45 seconds
Warm-up time
First print out
time
8.5 seconds (From Ready)
Sleep mode: 35 seconds
110 - 127 VAC or 220 - 240 VAC
Power rating
See the Rating label on the machine for the
correct voltage, hertz and current of your machine.
Power
Average: 650 W
consumption
Power save mode: Less than 13 W
b
Noise level
Standby mode: Less than 35 dBA
Printing mode: Less than 57 dBA
Toner cartridge
yield
10,000 or 20,000 pages.
c
Duty cycle
Weight
Monthly: Up to 200,000 pages
ML-4550,
21.6 Kg (including
consumables)
ML-4551N
ML-4551ND
23.5 Kg (including
consumables)
Package weight
ML-4550,
Paper: 2.8 Kg, Plastic: 0.7 Kg
ML-4551N
ML-4551ND
Paper: 3.0 Kg, Plastic: 0.8 Kg
External
dimensions
(W x D x H)
ML-4550,
ML-4551N
15.6 X 17.8 X 13.9 inches
(396 X 453 X 353 mm)
ML-4551ND
15.6 X 19.7 X 13.9 inches
(396 X 501 X 353 mm)
Operating
environment
Temperature: 50° F to 90° F (10° C to 32.5° C)
Humidity: 20% to 80% RH
d
Printer language PCL 6 , PostScript 3, IBM ProPrinter, EPSON
Memory
128 MB (Max. 512 MB)
128, or 256 MB optional memory available.
Use only the Samsung-approved DIMM.
128 MB: ML-MEM150
256 MB: ML-MEM160
Display
16 characters x 2 lines
11.1
<
Specifications>
Download from Www.Somanuals.com. All Manuals Search And Download.
Item
Specifications and Description
Fonts
1 bitmap, 45 scalable, 136 PostScript 3 fonts,
Bar Code fonts, OCR fonts
Interface
• IEEE 1284 Bidirectional Parallel Standard
- Modes supported: Compatible, Nibble, Byte,
ECP
• USB Interface Standard
- USB 2.0 compliant
- 480 Mbps 1 port
• Network Interface
- ML-4551N, ML-4551ND: enthernet 10/100
Base TX wired LAN
OS compatibility • Windows 98/Me/NT 4.0/2000/XP/2003
• Various Linux OS
• Mac 8.6 ~ 9.2/10.1 ~ 10.4
e
Printer drivers
• PCL driver: Windows 98/Me/NT 4.0/2000/XP/
2003
• Various Linux OS
• PostScript driver: Windows 98/Me/NT 4.0/
2000/XP/2003, Macintosh OS 8.6 ~ 9.2/
10.1 ~ 10.4
Options
ML-4550
500-sheet trays, ethernet 10/
100 Base TX wired LAN,
hard disk, duplex unit, DIMM
ML-4551N,
ML-4551ND
500-sheet trays, hard disk,
duplex unit, DIMM
500-sheet trays, hard disk,
DIMM
a. Print speed will be affected by operating system used, computing perfor-
mance, application software, connection method, media type, media size, and
job complexity.
b. Sound pressure Level, ISO7779
c. Average cartridge yield declared in accordance with ISO/IEC 19752.
The number of pages may be affected by operating environment, printing
interval, media type, and media size.
d. Compatible with PCL6 Version 2.1
11.2
<Specifications>
Download from Www.Somanuals.com. All Manuals Search And Download.
INDEX
A
I
P
accessories
installing
installing accessories
paper jam, clear
DIMM 10.1
memory 10.1
J
C
cleaning
drum 8.3
paper load
L
inside 8.1
outside 8.1
loading paper
tray 5.5
control panel
tray 5.5
paper size
setting 2.4
specifications 5.2
paper type
buttons 1.4
menus 2.1
setting 2.4
M
specifications 5.2
printing
memory 10.1
D
display language, change
problems 9.9
problem, solve
N
checklist 9.5
Linux 9.14
Macintosh 9.14
printing 9.9
network setup
EtherTalk 4.2
TCP/IP 4.2
E
Windows 9.13
H
O
hard disk
installing 10.4
use 10.6
Q
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Samsung Printer
Software section
Download from Www.Somanuals.com. All Manuals Search And Download.
SOFTWARE SECTION
Installing Printer Software ........................................................................................................ 4
Installing Software for Local Printing ................................................................................. 4
Installing Software for Network Printing ............................................................................. 7
Changing the Software Language ............................................................................................ 10
Reinstalling Printer Software ................................................................................................... 10
Removing Printer Software ..................................................................................................... 11
Printing a Document .............................................................................................................. 12
Printer Settings ..................................................................................................................... 13
Layout Tab .................................................................................................................. 13
Paper Tab .................................................................................................................... 14
Graphics Tab ............................................................................................................... 15
Extras Tab ................................................................................................................... 16
About Tab ................................................................................................................... 17
Printer Tab .................................................................................................................. 17
Using a Favorite Setting ................................................................................................ 17
Using Help ................................................................................................................... 17
Chapter 3: ADVANCED PRINTING
Printing Multiple Pages on One Sheet of Paper (N-Up Printing) ..................................................... 18
Printing Posters ..................................................................................................................... 19
Printing Booklets .................................................................................................................. 19
Printing on Both Sides of Paper ............................................................................................... 20
Printing a Reduced or Enlarged Document ................................................................................ 20
Fitting Your Document to a Selected Paper Size ......................................................................... 20
Using Watermarks ................................................................................................................. 21
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Using an Existing Watermark ......................................................................................... 21
Creating a Watermark ................................................................................................... 21
Editing a Watermark ..................................................................................................... 21
Deleting a Watermark ................................................................................................... 21
Using Overlays ...................................................................................................................... 22
What is an Overlay? ...................................................................................................... 22
Creating a New Page Overlay ......................................................................................... 22
Using a Page Overlay .................................................................................................... 22
Deleting a Page Overlay ................................................................................................ 22
Printer Settings ..................................................................................................................... 23
Using Help ................................................................................................................... 23
Overview Direct Print Utility .................................................................................................... 24
Printing ................................................................................................................................ 24
From the Direct Print Utility window ................................................................................ 24
Using the shortcut icon ................................................................................................. 24
Using the right-click menu ............................................................................................. 24
Chapter 6: SHARING THE PRINTER LOCALLY
Setting Up a Host Computer ................................................................................................... 25
Setting Up a Client Computer .................................................................................................. 25
Chapter 7: USING SMART PANEL
Understanding Smart Panel .................................................................................................... 26
Opening the Troubleshooting Guide ......................................................................................... 27
Using Printer Settings Utility ................................................................................................... 27
Using Onscreen Help File ............................................................................................... 27
Changing the Smart Panel Program Settings ............................................................................. 27
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 8: USING YOUR PRINTER IN LINUX
Getting Started ..................................................................................................................... 28
Installing the Unified Linux Driver ............................................................................................ 28
Installing the Unified Linux Driver ................................................................................... 28
Uninstalling the Unified Linux Driver ............................................................................... 29
Using the Unified Driver Configurator ....................................................................................... 30
Opening the Unified Driver Configurator .......................................................................... 30
Printers Configuration ................................................................................................... 30
Ports Configuration ....................................................................................................... 31
Configuring Printer Properties ................................................................................................. 31
Printing a Document .............................................................................................................. 32
Printing from Applications .............................................................................................. 32
Printing Files ................................................................................................................ 32
Chapter 9: USING YOUR PRINTER WITH A MACINTOSH
Installing Software for Macintosh ............................................................................................. 33
Setting Up the Printer ............................................................................................................ 34
For a Network-connected Macintosh ................................................................................ 34
For a USB-connected Macintosh ..................................................................................... 34
Printing ................................................................................................................................ 35
Printing a Document ..................................................................................................... 35
Changing Printer Settings .............................................................................................. 35
Printing Multiple Pages on One Sheet of Paper .................................................................. 36
Duplex Printing ............................................................................................................ 37
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Typical Installation
1
Installing Printer
Software in Windows
This is recommended for most users. All components necessary
for printer operations will be installed.
1
2
Make sure that the printer is connected to your computer
and powered on.
This chapter includes:
Insert the supplied CD-ROM into your CD-ROM drive.
• Installing Printer Software
• Changing the Software Language
• Reinstalling Printer Software
• Removing Printer Software
The CD-ROM should automatically run, and an installation
window appears.
If the installation window does not appear, click Start and
then Run. Type X:\Setup.exe, replacing “X” with the
letter which represents your drive and click OK
.
Installing Printer Software
You can install the printer software for local printing or network
printing. To install the printer software on the computer,
perform the appropriate installation procedure depending on
the printer in use.
A printer driver is software that lets your computer
communicate with your printer. The procedure to install drivers
may differ depending on the operating system you are using.
All applications should be closed on your PC before beginning
installation.
3
4
Click Next
.
Installing Software for Local Printing
• If necessary, select a language from the drop-down list.
•
View User’s Guide: Allows you to view the User’s
Guide. If your computer doesn’t have Adobe Acrobat,
click on this option and it will automatically install Adobe
Acrobat Reader for you.
A local printer is a printer directly attached to your computer
using the printer cable supplied with your printer, such as a USB
or parallel cable. If your printer is attached to a network, skip
this step and go to “Installing Software for Network Printing” on
page 7.
Select Typical installation for a local printer. Click
Next
.
You can install the printer software using the typical or custom
method.
NOTE: If the “New Hardware Wizard” window appears during
the installation procedure, click
the box to close the window, or click Cancel
in the upper right corner of
.
4
Installing Printer Software in Windows
Download from Www.Somanuals.com. All Manuals Search And Download.
7
To register yourself as a user of Samsung Printers in order
to receive information from Samsung, select the checkbox
and click Finish. You are now sent to the Samsung web
site.
NOTE: If your printer is not already connected to the
computer, the following window will appear.
Otherwise, just click Finish
.
• After connecting the printer, click Next
.
• If you don’t want to connect the printer at this time, click
Next, and No on the following screen. Then the installation
will start and a test page will not be printed at the end of the
installation.
• The installation window that appears in this User’s
Guide may differ depending on the printer and
interface in use.
NOTE: After setup is complete, if your printer driver doesn’t
work properly, reinstall the printer driver. See “Reinstalling
Printer Software” on page 10.
Custom Installation
5
6
After the installation is finished, a window asking you to
print a test page appears. If you choose to print a test
You can choose individual components to install.
page, select the checkbox and click Next
.
1
2
Make sure that the printer is connected to your computer
and powered on.
Otherwise, just click Next and skip to step 7.
Insert the supplied CD-ROM into your CD-ROM drive.
If the test page prints out correctly, click Yes
.
The CD-ROM should automatically run, and an installation
window appears.
If not, click No to reprint it.
If the installation window does not appear, click Start and
then Run. Type X:\Setup.exe, replacing “X” with the
letter which represents your drive and click OK
.
5
Installing Printer Software in Windows
Download from Www.Somanuals.com. All Manuals Search And Download.
3
4
Click Next
.
• If necessary, select a language from the drop-down list.
NOTE: If your printer is not already connected to the
computer, the following window will appear.
•
View User’s Guide: Allows you to view the User’s
Guide. If your computer doesn’t have Adobe Acrobat,
click on this option and it will automatically install Adobe
Acrobat Reader for you.
Select Custom installation. Click Next
.
• After connecting the printer, click Next
.
• If you don’t want to connect the printer at this time, click
Next, and No on the following screen. Then the installation
will start and a test page will not be printed at the end of the
installation.
• The installation window that appears in this User’s
Guide may differ depending on the printer and
interface in use.
5
Select your printer and click Next.
6
Select the components to be installed and click Next.
NOTE: You can change the desired installation folder by
clicking [Browse].
7
8
After the installation is finished, a window asking you to
print a test page appears. If you choose to print a test
page, select the checkbox and click Next
.
Otherwise, just click Next and skip to step 9.
If the test page prints out correctly, click Yes
.
If not, click No to reprint it.
6
Installing Printer Software in Windows
Download from Www.Somanuals.com. All Manuals Search And Download.
9
To register yourself as a user of Samsung Printers in order
to receive information from Samsung, select the checkbox
and click Finish. You are now sent to the Samsung web
site.
If the installation window does not appear, click Start and
then Run. Type X:\Setup.exe, replacing “ ” with the
letter which represents your drive and click OK
X
.
Otherwise, just click Finish
.
3
4
Click Next
.
• If necessary, select a language from the drop-down list.
•
View User’s Guide: Allows you to view the User’s
Guide. If your computer doesn’t have Adobe Acrobat,
click on this option and it will automatically install Adobe
Acrobat Reader for you.
Installing Software for Network
Printing
When you connect your printer to a network, you must first
configure the TCP/IP settings for the printer. After you have
assigned and verified the TCP/IP settings, you are ready to
install the software on each computer on the network.
Select Typical installation for a network printer. Click
Next
.
You can install the printer software using the typical or custom
method.
Typical Installation
This is recommended for most users. All components necessary
for printer operations will be installed.
1
Make sure that the printer is connected to your network
and powered on. For details about connecting to the
network, see the supplied printer’s User’s Guide.
2
Insert the supplied CD-ROM into your CD-ROM drive.
The CD-ROM should automatically run, and an installation
window appears.
7
Installing Printer Software in Windows
Download from Www.Somanuals.com. All Manuals Search And Download.
5
The list of printers available on the network appears.
Select the printer you want to install from the list and then
Custom Installation
You can choose individual components to install and set a
specific IP address.
click Next
.
1
Make sure that the printer is connected to your network
and powered on. For details about connecting to the
network, see the supplied printer’s User’s Guide.
2
Insert the supplied CD-ROM into your CD-ROM drive.
The CD-ROM should automatically run, and an installation
window appears.
If the installation window does not appear, click Start and
then Run. Type X:\Setup.exe, replacing “X” with the
letter which represents your drive and click OK
.
• If you do not see your printer on the list, click Update to
refresh the list, or select Add TCP/IP Port to add your
printer to the network. To add the printer to the
network, enter the port name and the IP address for the
printer.
• To find a shared network printer (UNC Path), select
Shared Printer [UNC] and enter the shared name
manually or find a shared printer by clicking the Browse
button.
6
After the installation is finished, a window appears asking
you to print a test page and to register yourself as a user
of Samsung Printers in order to receive information from
Samsung. If you so desire, select the corresponding
3
4
Click Next
.
• If necessary, select a language from the drop-down list.
checkbox(es) and click Finish
.
•
View User’s Guide: Allows you to view the User’s
Guide. If your computer doesn’t have Adobe Acrobat,
click on this option and it will automatically install Adobe
Acrobat Reader for you.
Otherwise, just click Finish
.
Select Custom installation. Click Next
.
NOTE: After setup is complete, if your printer driver doesn’t
work properly, reinstall the printer driver. See “Reinstalling
Printer Software” on page 10.
8
Installing Printer Software in Windows
Download from Www.Somanuals.com. All Manuals Search And Download.
5
The list of printers available on the network appears.
Select the printer you want to install from the list and then
6
Select the components to be installed. After selecting the
components, the following window appears. You can also
change the printer name, set the printer to be shared on
the network, set the printer as the default printer, and
click Next
.
change the port name of each printer. Click Next
.
• If you do not see your printer on the list, click Update to
refresh the list, or select Add TCP/IP Port to add your
printer to the network. To add the printer to the
network, enter the port name and the IP address for the
printer.
To install this software on a server, select the Setting up
this printer on a server checkbox.
7
After the installation is finished, a window appears asking
you to print a test page and to register yourself as a user
of Samsung Printers in order to receive information from
Samsung. If you so desire, select the corresponding
• To find a shared network printer (UNC Path), select
Shared Printer [UNC] and enter the shared name
manually or find a shared printer by clicking the Browse
button.
checkbox(es) and click Finish
.
TIP: If you want to set a specific IP address on a specific
network printer, click the Set IP Address button. The Set IP
Address window appears. Do as follows:
NOTE: After setup is complete, if your printer driver doesn’t
work properly, reinstall the printer driver. See “Reinstalling
Printer Software” on page 10.
a. Select a printer to be set with a specific IP address from the
list. To verify your printer’s IP address or MAC address,
print a Network Configuration page.
b. Configure an IP address, subnet mask, and gateway for the
printer manually and click Configure to set the specific IP
address for the network printer.
c. Click Next
.
9
Installing Printer Software in Windows
Download from Www.Somanuals.com. All Manuals Search And Download.
NOTE: If your printer is not already connected to the
computer, the following window will appear.
Changing the Software
Language
After installation of the software, you can change the display
language.
1
2
Click the Windows Start menu.
Select Programs or All Programs and then your printer
driver name
Select Language Selection
Select the desired language from the language selection
window, and click OK
.
3
4
.
.
• After connecting the printer, click Next
.
Reinstalling Printer Software
• If you don’t want to connect the printer at this time, click
Next, and No on the following screen. Then the installation
will start and a test page will not be printed at the end of the
installation.
• The reinstallation window that appears in this User’s
Guide may differ depending on the printer and
interface in use.
You can reinstall the software if installation fails.
1
2
Start Windows.
From the Start menu select Programs or All Programs
→
your printer driver name
→
Maintenance.
3
4
Select Repair and click Next
.
The list of printers available on the network appears.
Select the printer you want to install from the list and then
5
Select the components you want to reinstall and click
Next
.
click Next
.
If you installed the printer software for local printing
and you select your printer driver name, the window
asking you to print a test page appears. Do as follows:
a. To print a test page, select the check box and click
Next
.
b. If the test page prints out correctly, click Yes
.
If it doesn’t, click No to reprint it.
6
When the reinstallation is done, click Finish
.
• If you do not see your printer on the list, click Update to
refresh the list, or select Add TCP/IP Port to add your
printer to the network. To add the printer to the
network, enter the port name and the IP address for the
printer.
• To find a shared network printer (UNC Path), select
Shared Printer [UNC] and enter the shared name
manually or find a shared printer by clicking the Browse
button.
You will see a component list so that you can reinstall any
item individually.
10
Installing Printer Software in Windows
Download from Www.Somanuals.com. All Manuals Search And Download.
Removing Printer Software
1
2
Start Windows.
From the Start menu select Programs or All Programs
→
your printer driver name
→
Maintenance.
3
Select Remove and click Next
.
You will see a component list so that you can remove any
item individually.
4
5
Select the components you want to remove and then click
Next
When your computer asks you to confirm your selection,
click Yes
.
.
The selected driver and all of its components are removed
from your computer.
6
After the software is removed, click Finish.
11
Installing Printer Software in Windows
Download from Www.Somanuals.com. All Manuals Search And Download.
1
2
Open the document you want to print.
Select Print from the File menu. The Print window is
displayed. It may look slightly different depending on your
application.
2
This chapter explains the printing options and common printing
tasks in Windows.
The basic print settings are selected within the Print
window. These settings include the number of copies and
print range.
This chapter includes:
• Printing a Document
• Printer Settings
- Layout Tab
- Paper Tab
Make sure that your
printer is selected.
- Graphics Tab
- Extras Tab
- About Tab
- Printer Tab
- Using a Favorite Setting
- Using Help
3
4
Select your printer driver from the Name drop-down
list.
To take advantage of the printer features provided by your
printer driver, click Properties or Preferences in the
application’s Print window. For details, see “Printer
Settings” on page 13.
Printing a Document
NOTES
:
• Your printer driver Properties window that appears in this
User’s Guide may differ depending on the printer in use.
However the composition of the printer properties window is
similar.
• Check the Operating System(s) that are compatible
with your printer. Please refer to the OS Compatibility
section of Printer Specifications in your Printer User’s
Guide.
If you see Setup Printer, or Options in your Print
window, click it instead. Then click Properties on the next
screen.
,
5
6
Click OK to close the printer properties window.
To start the print job, click OK or Print in the Print
window.
• If you need to know the exact name of your printer, you can
check the supplied CD-ROM.
The following procedure describes the general steps required
for printing from various Windows applications. The exact steps
for printing a document may vary depending on the application
program you are using. Refer to the User’s Guide of your
software application for the exact printing procedure.
12
Basic Printing
Download from Www.Somanuals.com. All Manuals Search And Download.
Layout Tab
The Layout tab provides options to adjust how the document
appears on the printed page. The Layout Options includes
Multiple Pages per Side and Poster Printing. See “Printing
a Document” on page 12 for more information on accessing
printer properties.
Printer Settings
You can use the printer properties window, which allows you to
access all of the printer options you need when using your
printer. When the printer properties are displayed, you can
review and change the settings needed for your print job.
Your printer properties window may differ, depending on your
operating system. This Software User’s Guide shows the
Properties window for Windows XP.
1
2
Your printer driver Properties window that appears in this
User’s Guide may differ depending on the printer in use.
If you access printer properties through the Printers folder, you
can view additional Windows-based tabs (refer to your
Windows User’s Guide) and the Printer tab (see “Printer Tab” on
page 17).
NOTES
:
• Most Windows applications will override settings you specify
in the printer driver. Change all print settings available in the
software application first, and change any remaining settings
using the printer driver.
• The settings you change remain in effect only while you are
using the current program. To make your changes
permanent, make them in the Printers folder.
• The following procedure is for Windows XP. For other
Windows OS, refer to the corresponding Windows User's
Guide or online help.
Paper Orientation
Paper Orientation allows you to select the direction in which
information is printed on a page.
1. Click the Windows Start button.
•
•
Portrait prints across the width of the page, letter style.
Landscape prints across the length of the page, spreadsheet
style.
2. Select Printers and Faxes
.
3. Select your printer driver icon.
4. Right-click on the printer driver icon and select
•
Printing Preferences
.
5. Change the settings on each tab, click OK.
Landscape
Portrait
Layout Options
Layout Options allows you to select advanced printing options.
You can choose Multiple Pages per Side and Poster Printing
.
•
For details, see “Printing Multiple Pages on One Sheet of Paper
(N-Up Printing)” on page 18.
•
For details, see “Printing Posters” on page 19
Double-sided Printing
Double-sided Printing allows you to print on both sides of
paper. If this option does not appear, your printer does
not have this feature.
•
For details, see “Printing on Both Sides of Paper” on page 20.
13
Basic Printing
Download from Www.Somanuals.com. All Manuals Search And Download.
Paper Tab
3
Source
Make sure that Source is set to the corresponding paper tray.
Use Manual Feeder when printing on special materials like
envelopes and transparencies. You have to load one sheet at a
time into the Manual Tray or Multi-Purpose Tray.
If the paper source is set to Auto Selection, the printer
automatically picks up print material in the following tray order:
Manual Tray or Multi-Purpose Tray, Tray n.
Use the following options to set the basic paper handling
specifications when you access the printer properties. See
“Printing a Document” on page 12 for more information on
accessing printer properties.
Click the Paper tab to access various paper properties.
1
2
4
Type
Set Type to correspond to the paper loaded in the tray from
which you want to print. This will let you get the best quality
printout. If not, print quality may not be acheived as you want.
Cotton: 20 lb to 24 lb (75~90 g/m2) cotton paper such as Gilbert
25 % and Gilbert 100 %.
3
4
Plain Paper: Normal plain paper. Select this type if your printer is
Recycled Paper: 20 lb to 24 lb (75~90 g/m2) recycled paper.
Color Paper: 20 lb to 24 lb (75~90 g/m2) color-backgrounded
paper.
5
First Page
This property allows you to print the first page using a different
paper type from the rest of the document. You can select the
paper source for the first page.
For example, load thick stock for the first page into the Multi-
purpose Tray, and plain paper into Tray n. Then, select Tray n in
the Source option and Multi-Purpose Tray in the First Page
option. Some printers do not support this feature.
1
Copies
Copies allows you to choose the number of copies to be printed.
You can select 1 to 999 copies.
5
Scaling Printing
Scaling Printing allows you to automatically or manually scale
your print job on a page. You can choose from None Reduce/
Enlarge, and Fit to Page
2
Size
Size allows you to set the size of paper you loaded in the tray.
,
.
If the required size is not listed in the Size box, click Custom
When the Custom Paper Setting window appears, set the paper
size and click OK. The setting appears in the list so that you can
select it.
.
•
For details, see “Printing a Reduced or Enlarged Document” on
page 20.
•
For details, see “Fitting Your Document to a Selected Paper
Size” on page 20.
14
Basic Printing
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced Options
Graphics Tab
Use the following Graphic options to adjust the print quality for
your specific printing needs. See “Printing a Document” on
page 12 for more information on accessing printer properties.
You can set advanced settings by clicking the Advanced
Options button.
•
TrueType Options: This option determines what the driver
tells the printer about how to image the text in your document.
Select the appropriate setting according to the status of your
document. This option may be available only in
Windows 9x/Me, depending on your particular printer
model.
Click the Graphic tab to display the properties shown below..
-
Download as Outline: When this option is selected, the
driver will download any TrueType fonts that are used in your
document not already stored (resident) on your printer. If,
after printing a document, you find that the fonts did not print
correctly, choose Download as bit image and resubmit your
print job. The Download as bit image setting is often useful
when printing Adobe. This feature is available only
when you use the PCL printer driver.
-
-
Download as Bitmap: When this option is selected, the
driver will download the font data as bitmap images.
Documents with complicated fonts, such as Korean or
Chinese, or various other fonts, will print faster in this setting.
Print as Graphics: When this option is selected, the driver
will download any fonts as graphics. When printing documents
with high graphic content and relatively few TrueType fonts,
printing performance (speed) may be enhanced in this
setting.
•
Print All Text To Black: When the Print All Text To Black
option is checked, all text in your document prints solid black,
regardless of the color it appears on the screen.
Resolution
The Resolution options you can select may vary
depending on your printer model. The higher the setting,
the sharper the clarity of printed characters and graphics. The
higher setting also may increase the time it takes to print a
document.
Toner Save Mode
Selecting this option extends the life of your toner cartridge and
reduces your cost per page without a significant reduction in print
quality. Some printers do not support this feature.
•
Printer Setting: If you select this option, this feature is
determined by the setting you’ve made on the control panel of
the printer.
•
•
On: Select this option to allow the printer to use less toner on
each page.
Off: If you don’t need to save toner when printing a document,
select this option.
15
Basic Printing
Download from Www.Somanuals.com. All Manuals Search And Download.
•
Use Printer Fonts: When Use Printer Fonts is checked, the
printer uses the fonts that are stored in its memory (resident
fonts) to print your document, rather than downloading the
fonts used in your document. Because downloading fonts takes
time, selecting this option can speed up your printing time.
When using Printer fonts, the printer will try to match the fonts
used in your document to those stored in its memory. If,
however, you use fonts in your document that are very different
from those resident in the printer, your printed output will
appear very different from what it looks like on the screen.
This feature is available only when you use the PCL
printer driver.
Save as Form for Overlay: Select Save as Form for Overlay to
save the document as a form file (C:\FORMOVER\*.FOM). Once
this option is selected, the printer driver requires the file name
and the destination path each time you print. If you want to
preset the file name and specify the path, click on the button in
the Output to area, and type the file name and specify the path.
This feature is available only when you use the PCL
printer driver.
Extras Tab
You can select output options for your document. See “Printing
a Document” on page 12 for more information about accessing
the printer properties.
Click the Extras tab to access the following feature:
1
2
3
•
4
Job Setting
Print and Hold dialog allows you to select how to print or save the
printing file by using the optional HDD. Some printers do not
support this feature.
1
Watermark
Using Onscreen Help File
You can create a background text image to be printed on each
page of your document. For details, see “Using Watermarks” on
page 21.
• For more information about Job Setting, click
at the
top right corner of the window. The Job Setting Help
window opens and allows you to view onscreen help supplied
on the Job Setting
.
2
Overlay
Overlays are often used to take the place of preprinted forms and
letterhead paper. For details, see “Using Overlays” on page 22.
3
Output Options
•
Print Subset: You can set the sequence in which the pages
print. Select the print order from the drop-down list.
-
-
-
Normal(1,2,3): Your printer prints all pages from the first
page to the last page.
Reverse All Pages(3,2,1): Your printer prints all pages from
the last page to the first page.
Print Odd Pages: Your printer prints only the odd numbered
pages of the document.
•
•
Print Even Pages: Your printer prints only the even
numbered pages of the document.
Information Page: Select Banner Page to print a banner sheet
containing the printer name, the network user ID, job name
before printing the document. When several users send a print
job to the printer, this option allows you to easily find your
printing from the output tray. Some printers do not
support this feature.
16
Basic Printing
Download from Www.Somanuals.com. All Manuals Search And Download.
About Tab
Using a Favorite Setting
Use the About tab to display the copyright notice and the
version number of the driver. If you have an Internet browser,
you can connect to the Internet by clicking on the web site icon.
See “Printing a Document” on page 12 for more information
about accessing printer properties.
The Favorites option, which is visible on each properties tab,
allows you to save the current properties settings for future
use.
To save a Favorites item:
1
2
Change the settings as needed on each tab.
Enter a name for the item in the Favorites input box.
Printer Tab
If you access printer properties through the Printers folder,
you can view the Printer tab. You can set the printer
configuration.
The following procedure is for Windows XP. For other Windows
OS, refer to the corresponding Windows User's Guide or online
help.
1
2
3
4
Click the Windows Start menu.
Select Printers and Faxes
.
3
Click Save.
Select your printer driver icon.
When you save Favorites, all current driver settings are
saved.
Right-click on the printer driver icon and select
Properties
.
To use a saved setting, select the item from the Favorites drop
down list. The printer is now set to print according to the
Favorites setting you selected.
5
Click the Printer tab and set the options.
To delete a Favorites item, select it from the list and click
Delete
.
You can also restore the printer driver’s default settings by
selecting Printer Default from the list.
Using Help
Your printer has a help screen that can be activated by clicking
the Help button in the printer properties window. These help
screens give detailed information about the printer features
provided by the printer driver.
You can also click
from the upper right corner of the window,
and then click on any setting.
17
Basic Printing
Download from Www.Somanuals.com. All Manuals Search And Download.
3
This chapter explains printing options and advanced printing
tasks.
Printing Multiple Pages on One
Sheet of Paper (N-Up Printing)
You can select the number of pages to print on a single sheet
of paper. To print more than one page per sheet, the pages will
be reduced in size and arranged in the order you specify. You
can print up to 16 pages on one sheet.
1
3
2
4
NOTE
:
• Your printer driver Properties window that appears in this
User’s Guide may differ depending on the printer in use.
However the composition of the printer properties window is
similar.
• If you need to know the exact name of your printer, you can
check the supplied CD-ROM.
1
To change the print settings from your software
application, access printer properties. See “Printing a
Document” on page 12.
2
3
From the Layout tab, choose Multiple Pages per Side in
the Layout Type drop-down list.
Select the number of pages you want to print per sheet
(1, 2, 4, 6, 9, or 16) in the Pages per Side drop-down
list.
This chapter includes:
• Printing Multiple Pages on One Sheet of Paper (N-Up
Printing)
4
Select the page order from the Page Order drop-down
list, if necessary.
• Printing Posters
• Printing Booklets
Check Print Page Border to print a border around each
page on the sheet.
Click the Paper tab, select the paper source, size, and
type.
• Printing on Both Sides of Paper
• Printing a Reduced or Enlarged Document
• Fitting Your Document to a Selected Paper Size
• Using Watermarks
5
6
Click OK and print the document.
• Using Overlays
18
Advanced Printing
Download from Www.Somanuals.com. All Manuals Search And Download.
Printing Posters
Printing Booklets
This feature allows you to print a single-page document onto 4,
9, or 16 sheets of paper, for the purpose of pasting the sheets
together to form one poster-size document.
9
9
8
8
1
To change the print settings from your software
application, access printer properties. See “Printing a
Document” on page 12.
This printer feature allows you to print your document on both
sides of the paper and arranges the pages so that the paper can
be folded in half after printing to produce a booklet.
2
3
Click the Layout tab, select Poster Printing in the
Layout Type drop-down list.
Configure the poster option:
1
To change the print settings from your software
application, access the printer properties. See “Printing a
Document” on page 12.
You can select the page layout from Poster<2x2>
,
Poster<3x3>, or Poster<4x4>. If you select
Poster<2x2>, the output will be automatically stretched
to cover 4 physical pages.
2
From the Layout tab, choose Booklet Printing from the
Type drop-down list.
NOTE: The booklet printing option is available when A4,
Letter, Legal, or Folio size is selected in the Size option on the
Paper tab.
3
Click the Paper tab, and select the paper source, size, and
type.
4
5
Click OK and print the document.
Specify an overlap in millimeters or inches to make it
easier to pasting the sheets together.
After printing, fold and staple the pages.
0.15 inches
0.15 inches
4
5
Click the Paper tab, select the paper source, size, and
type.
Click OK and print the document. You can complete the
poster by pasting the sheets together.
19
Advanced Printing
Download from Www.Somanuals.com. All Manuals Search And Download.
Printing on Both Sides of Paper
Printing a Reduced or Enlarged
Document
You can print on both sides of a sheet of paper. Before printing,
decide how you want your document oriented.
You can change the size of a page’s content to appear larger or
smaller on the printed page.
The options are:
•
Printer Setting, if you select this option, this feature is
determined by the setting you’ve made on the control
panel of the printer. If this option does not appear,
your printer does not have this feature.
1
To change the print settings from your software
application, access printer properties. See “Printing a
Document” on page 12.
2
3
From the Paper tab, select Reduce/Enlarge in the
Enter the scaling rate in the Percentage input box.
•
•
None
Long Edge, which is the conventional layout used in
book binding.
You can also click the
or
button.
•
Short Edge, which is the type often used with calendars.
4
5
Select the paper source, size, and type in Paper Options.
2
Click OK and print the document.
2
3
2
5
3
3
2
5
5
3
5
Fitting Your Document to a
Selected Paper Size
Long Edge
Short Edge
•
Reverse Duplex, allows you to select general print
order compare to duplex print order. If this option does
This printer feature allows you to scale your print job to any
not appear, your printer does not have this feature.
selected paper size regardless of the digital document size. This
can be useful when you want to check fine details on a small
document.
A
NOTE
:
1
To change the print settings from your software
application, access printer properties. See “Printing a
Document” on page 12.
• Do not print on both sides of labels, transparencies,
envelopes, or thick paper. Paper jamming and damage to the
printer may result.
• To use double-sided printing, you can use only the following
paper sizes: A4, Letter, Legal, and Folio, with a weight of
2
3
From the Paper tab, select Fit to Page in the Printing
Type drop-down list.
Select the correct size from the Target Page drop-down
list.
20~24 lbs (75~90 g/m²).
1
To change the print settings from your software
application, access printer properties. “Printing a
Document” on page 12.
4
5
Select the paper source, size, and type in Paper Options.
Click OK and print the document.
2
3
From the Layout tab, select the paper orientation.
From the Double-sided Printing section, select the
binding option you want.
4
5
Click the Paper tab and select the paper source, size, and
type.
Click OK and print the document.
NOTE: If your printer does not have a duplex unit, you should
complete the printing job manually. The printer prints every
other page of the document first. After printing the first side of
your job, the Printing Tip window appears. Follow the on-
screen instructions to complete the printing job.
20
Advanced Printing
Download from Www.Somanuals.com. All Manuals Search And Download.
Editing a Watermark
Using Watermarks
1
2
3
To change the print settings from your software
application, access printer properties. See “Printing a
Document” on page 12.
Click the Extras tab and click the Edit button in the
Watermark section. The Edit Watermark window
appears.
Select the watermark you want to edit from the Current
Watermarks list and change the watermark message and
options.
The Watermark option allows you to print text over an existing
document. For example, you may want to have large gray
letters reading “DRAFT” or “CONFIDENTIAL” printed diagonally
across the first page or all pages of a document.
There are several predefined watermarks that come with the
printer, and they can be modified, or you can add new ones to
the list.
4
5
Click Update to save the changes.
Click OK until you exit the Print window.
Using an Existing Watermark
1
2
3
To change the print settings from your software
application, access printer properties. See “Printing a
Document” on page 12.
Click the Extras tab, and select the desired watermark
from the Watermark drop-down list. You will see the
selected watermark in the preview image.
Deleting a Watermark
1
To change the print settings from your software
application, access printer properties. See “Printing a
Document” on page 12.
2
From the Extras tab, click the Edit button in the
Watermark section. The Edit Watermark window
appears.
Click OK and start printing.
NOTE: The preview image shows how the page will look when
it is printed.
3
4
Select the watermark you want to delete from the Current
Watermarks list and click Delete
Click OK until you exit the Print window.
.
Creating a Watermark
1
2
3
To change the print settings from your software
application, access printer properties. See “Printing a
Document” on page 12.
Click the Extras tab, and click the Edit button in the
Watermark section. The Edit Watermark window
appears.
Enter a text message in the Watermark Message box.
You can enter up to 40 characters. The message displays
in the preview window.
When the First Page Only box is checked, the watermark
prints on the first page only.
4
Select watermark options.
You can select the font name, style, size, or grayscale level
from the Font Attributes section and set the angle of the
watermark from the Message Angle section.
5
6
Click Add to add a new watermark to the list.
When you have finished editing, click OK and start
printing.
To stop printing the watermark, select <No Watermark> from
the Watermark drop-down list.
21
Advanced Printing
Download from Www.Somanuals.com. All Manuals Search And Download.
Using a Page Overlay
After an overlay has been created, it is ready to be printed with
your document. To print an overlay with a document:
Using Overlays
1
2
Create or open the document you want to print.
What is an Overlay?
To change the print settings from your software
application, access printer properties. See “Printing a
Document” on page 12.
An overlay is text and/or images stored in the computer hard
disk drive (HDD) as a special file format that can be printed on
any document. Overlays are often used to take the place of
preprinted forms and letterhead paper. Rather than using
preprinted letterhead, you can create an overlay containing the
exact same information that is currently on your letterhead. To
print a letter with your company’s letterhead, you do not need
to load preprinted letterhead paper in the printer. You need only
tell the printer to print the letterhead overlay on your
document.
Dear ABC
3
4
Click the Extras tab.
Select the desired overlay from the Overlay drop-down
list box.
If the overlay file you want does not appear in the
Overlay list, click Edit button and Load Overlay, and
select the overlay file.
Regards
WORLD BEST
5
If you have stored the overlay file you want to use in an
external source, you can also load the file when you access
the Load Overlay window.
Creating a New Page Overlay
To use a page overlay, you must create a new page overlay
containing your logo or image.
After you select the file, click Open. The file appears in the
Overlay List box and is available for printing. Select the
overlay from the Overlay List box.
6
7
If necessary, click Confirm Page Overlay When
Printing. If this box is checked, a message window
appears each time you submit a document for printing,
asking you to confirm your wish to print an overlay on your
document.
1
Create or open a document containing text or an image for
use in a new page overlay. Position the items exactly as
you wish them to appear when printed as an overlay.
To save the document as an overlay, access printer
properties. See “Printing a Document” on page 12.
Click the Extras tab, and click Edit button in the Overlay
section.
WORLD BEST
2
3
If this box is not checked and an overlay has been
selected, the overlay automatically prints with your
document.
4
5
In the Edit Overlay window, click Create Overlay.
Click OK or Yes until printing begins.
In the Create Overlay window, type a name of up to eight
characters in the File name box. Select the destination
path, if necessary. (The default is C:\Formover).
The selected overlay downloads with your print job and
prints on your document.
6
7
Click Save. The name appears on the Overlay List box.
NOTE: The resolution of the overlay document must be the
same as that of the document you will print with the overlay.
Click OK or Yes to finish creating.
The file is not printed. Instead it is stored on your
computer hard disk drive.
Deleting a Page Overlay
You can delete page overlays that you no longer use.
NOTE: The overlay document size must be the same as the
documents you print with the overlay. Do not create an overlay
with a watermark.
1
2
3
In the printer properties window, click the Extras tab.
Click the Edit button in the Overlay section.
Select the overlay you want to delete from the Overlay
List box.
4
5
6
Click Delete Overlay.
When a confirming message window appears, click Yes
.
Click OK until you exit the Print window.
22
Advanced Printing
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced
You can use advanced settings by clicking the Advanced
button.
4
Using Windows
PostScript Driver
If you want to use the PostScript driver provided with your
system CD-ROM to print a document.
PPDs, in combination with the PostScript driver, access printer
features and allow the computer to communicate with the
printer. An installation program for the PPDs is provided on the
supplied software CD-ROM.
This chapter includes:
Printer Settings
You can use the printer properties window, which allows you to
access all of the printer options you need when using your
printer. When the printer properties are displayed, you can
review and change the settings needed for your print job.
Your printer properties window may differ, depending on your
operating system. This Software User’s Guide shows the
Properties window for Windows XP.
•
•
•
Paper/Output this option allows you to select the size of the
paper loaded in the tray.
Graphic this option allows you to adjust the print quality for
your specific printing needs.
Document Options this options allow you to set the PostScript
options or printer features.
Your printer driver Properties window that appears in this
User’s Guide may differ depending on the printer in use.
NOTES
:
• Most Windows applications will override settings you specify
in the printer driver. Change all print settings available in the
software application first, and change any remaining settings
using the printer driver.
• The settings you change remain in effect only while you are
using the current program. To make your changes
permanent, make them in the Printers folder.
Using Help
You can click
from the upper right corner of the window, and
then click on any setting.
• The following procedure is for Windows XP. For other
Windows OS, refer to the corresponding Windows User's
Guide or online help.
1. Click the Windows Start button.
2. Select Printers and Faxes.
3. Select your printer driver icon.
4. Right-click on the printer driver icon and select
Printing Preferences.
5. Change the settings on each tab, click OK.
23
Using Windows PostScript Driver
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the shortcut icon
5
Using Direct Print Utility
This chapter explains how to use Direct Print Utility to print PDF files
without having to open the files.
1
Select the PDF file you will print and by dragging drop it to
the Direct Print Utility shortcut icon on your desk top.
The selected PDF file is sent to the default printer.
NOTE
:
If the default printer does not support Direct Print Utility,
the message window alerting you to select the appropriate printer
opens. Select the appropriate printer in the Select Printer section.
Overview Direct Print Utility
2
3
Customize the printer settings for your needs.
Click Print
The selected PDF file is sent to the printer.
Direct Print Utility is a program that sends a PDF file directly to
your printer without having to open the file. It sends data
through the Windows spooler using the port of the printer
driver. It only supports PDF format.
.
To installing this program, you should select Custom and put a
check mark in this program when you install the printer driver.
Using the right-click menu
1
Right-click on the PDF file you will print and select Direct
Printing
.
The Direct Print Utility window opens with the PDF file is
added.
Select the printer you will use.
Printing
2
3
There are several ways you can print using Direct Print Utility.
Customize the printer settings for your needs. See the
below part.
4
Click Print
.
From the Direct Print Utility window
The selected PDF file is sent to the printer.
1
From the Start menu select Programs or All Programs
Direct Print Utility Direct Print Utility
→
→
.
Or, double-click the Direct Print Utility shortcut icon on
your desk top.
The Direct Print Utility window opens.
2
3
Select the printer you will use in the Select Printer section
and click Browse
.
Select the PDF file you will print and click Open
.
The PDF file is added in the Select Files section.
4
5
Customize the printer settings for your needs. See the
next column.
Click Print
.
The selected PDF file is sent to the printer.
24
Using Direct Print Utility
Download from Www.Somanuals.com. All Manuals Search And Download.
6
Sharing the Printer
Locally
You can connect the printer directly to a selected computer,
which is called “host computer,” on the network.
Setting Up a Host Computer
1
2
3
4
5
6
Start Windows.
From the Start menu select Printers and Faxes
.
Double-click your printer driver icon
.
From the Printer menu, select Sharing
.
The following procedure is for Windows XP. For other Windows
OS, refer to the corresponding Windows User's Guide or online
help.
Check the Share this printer box.
Fill in the Shared Name field, and then click OK
.
NOTES
:
• Check the Operating System(s) that are compatible with
your printer. Please refer to the OS Compatibility section of
Printer Specifications in your Printer User’s Guide.
• If you need to know the exact name of your printer, you can
check the supplied CD-ROM.
Setting Up a Client Computer
1
2
3
4
5
6
7
8
9
Right-click the Windows Start button and select Explorer
Open your network folder in the left column.
Click the shared name.
.
From the Start menu select Printers and Faxes
Double-click your printer driver icon
From the Printer menu, select Properties
From the Ports tab, click Add Port
Select Local Port and click New Port
Fill in the Enter a port name field with the shared name.
.
.
.
.
.
10Click OK and click Close.
11Click Apply and click OK.
25
Sharing the Printer Locally
Download from Www.Somanuals.com. All Manuals Search And Download.
If you are a Windows user, from the Start menu, select
Programs or All Programs your printer driver name
→
→
7
Using Smart Panel
Smart Panel is a program that monitors and informs you of the
status of the printer, and allows you to customize the printer’s
settings. Smart Panel is installed automatically when you
install the printer software.
Smart Panel
.
NOTES:
• If you have already installed more than one Samsung
printer, first select the printer model you want in order to
use the corresponding Smart Panel. Right-click (in Windows
or Linux) or click (in Mac OS X) the Smart Panel icon and
select your printer name
.
NOTES:
• The Smart Panel window and its contents shown in this
Software User’s Guide may differ depending on the printer or
Operating System in use.
• To use this program, you need:
- Windows 98 or higher (Windows NT 4.0 can be used only
for network-supported printers.) To check for Operating
System(s) that are compatible with your printer, refer to
Printer Specifications in your Printer User’s Guide.
The Smart Panel program displays the current status of the
printer, the level of toner remaining in the toner cartridge(s)
and various other information. You can also change settings.
- Mac OS X 10.3 or higher
- Linux. To check for Linux systems that are compatible with
your printer, refer to Printer Specifications in your Printer
User’s Guide.
- Internet Explorer version 5.0 or higher for flash animation
in HTML Help.
2
• If you need to know the exact name of your printer, you can
check the supplied CD-ROM.
3
4
1
5
Understanding Smart Panel
1
Toner Level
If an error occurs while printing, Smart Panel appears
automatically, showing the error.
You can view the level of toner remaining in the toner
cartridge(s). The printer and the number of toner cartridge(s)
shown in the above window may differ depending on the printer in
use. Any printers do not have this feature.
You can also launch Smart Panel manually. Double-click the
Smart Panel icon on the Windows task bar (in Windows), or
Notification Area (in Linux). You can also click it on the status
bar (in Mac OS X).
2
Buy Now
You can order replacement toner cartridge(s) online.
Double-click this icon in Windows.
Click this icon in Mac OS X.
Click this icon in Linux.
3
Troubleshooting Guide
You can view Help to solve problems.
4
Printer Setting
You can configure various printer settings in the Printer Settings
Utility window. Any printers do not have this feature.
NOTE: If your printer is connected to a network and you are a
Windows user, the SyncThru Web Service window appears
instead of the Printer Settings Utility window. Mac OS X and
Linux do not support network environments.
26
Using Smart Panel
Download from Www.Somanuals.com. All Manuals Search And Download.
5
Driver Setting (Only for Windows)
You can use the printer properties window, which allows you to
access all of the printer options you need for using your
printer. For details, See “Printer Settings” on page 13.
Changing the Smart Panel
Program Settings
Right-click (in Windows or Linux) or click (in Mac OS X) the
Smart Panel icon and select Options
.
The following window opens.
Opening the Troubleshooting
Guide
Using the troubleshooting guide, you can view solutions for
error status problems.
Right-click (in Windows or Linux) or click (in Mac OS X) the
Smart Panel icon and select Troubleshooting Guide
.
Using Printer Settings Utility
Using the Printer Settings Utility, you can configure and check
print settings.
1
Right-click (in Windows or Linux) or click (in Mac OS X) the
•
Display when job is finished for network printer: The
Smart Panel icon and select Printer Setting
.
computer shows the Smart Panel popup window or
balloon when your job is complete in Windows. (Only for
Windows network-supported printers.)
2
3
Change the settings.
To send the changes to the printer, click the Apply button.
•
•
Display when error occurs during printing: The
computer shows the Smart Panel popup window or
balloon when an error occurs during printing.
NOTES: If your printer is connected to a network, the
SyncThru Web Service window appears instead of the
Printer Settings Utility window.
Display with: You can select how the computer shows
you a message. If you select Popup window (smart
panel), the message appears in the Smart Panel popup
window in Windows and Mac OS X.
Using Onscreen Help File
For more information about Printer Settings Utility, click
•
•
Launch Job Monitor when the job is saved in the
printer: If you store print jobs on the printer’s hard disk,
the computer opens the Job Monitor window in Windows.
(Only for Windows network-supported printers with
built-in hard disks.)
.
Schedule an automatic status checking every: The
computer updates the printer status regularly. Setting the
value close to 1 second causes the computer to check the
printer status more frequently, thereby allowing a faster
response to any printer error.
27
Using Smart Panel
Download from Www.Somanuals.com. All Manuals Search And Download.
8
Using Your Printer in
Linux
Installing the Unified Linux
Driver
You can use your machine in a Linux environment.
Installing the Unified Linux Driver
1
Make sure that you connect your machine to your
computer. Turn both the computer and the machine on.
When the Administrator Login window appears, type in
root in the Login field and enter the system password.
This chapter includes:
• Getting Started
2
• Installing the Unified Linux Driver
• Using the Unified Driver Configurator
• Configuring Printer Properties
• Printing a Document
NOTE: You must log in as a super user (root) to install the
printer software. If you are not a super user, ask your system
administrator.
3
Insert the printer software CD-ROM. The CD-ROM will
automatically run.
Getting Started
If the CD-ROM does not automatically run, click the
icon at the bottom of the desktop. When the Terminal
screen appears, type in:
The supplied CD-ROM provides you with Samsung’s Unified
Linux Driver package for using your machine with a Linux
computer.
If the CD-ROM is secondary master and the location to
mount is /mnt/cdrom,
After the driver is installed on your Linux system, the driver
package allows you to monitor a number of machine devices via
fast ECP parallel ports and USB simultaneously.
[root@localhost root]#mount -t iso9660 /dev/hdc /mnt/
cdrom
The Unified Linux Driver package is supplied with a smart and
flexible installation program. You don't need to search for
additional components that might be necessary for the Unified
Linux Driver software: all required packages will be carried onto
your system and installed automatically; this is possible on a
wide set of the most popular Linux clones.
[root@localhost root]#cd /mnt/cdrom/Linux
[root@localhost root]#./install.sh
NOTE: The installation program runs automatically if you
have an autorun software package installed and configured.
4
When the welcome screen appears, click Next.
28
Using Your Printer in Linux
Download from Www.Somanuals.com. All Manuals Search And Download.
5
When the installation is complete, click Finish.
Uninstalling the Unified Linux Driver
1
When the Administrator Login window appears, type in
root in the Login field and enter the system password.
NOTE: You must log in as a super user (root) to install the
printer software. If you are not a super user, ask your system
administrator.
2
Insert the printer software CD-ROM. The CD-ROM will
automatically run.
If the CD-ROM does not automatically run, click the
icon at the bottom of the desktop. When the Terminal
screen appears, type in:
If the CD-ROM is secondary master and the location to
mount is /mnt/cdrom,
The installation program has added the Unified Driver
Configurator desktop icon and Samsung Unified Driver
group to the system menu for your convenience. If you
have any difficulties, consult the onscreen help that is
available through your system menu or can otherwise be
called from the driver package windows applications,
[root@localhost root]#mount -t iso9660 /dev/hdc /mnt/
cdrom
[root@localhost root]#cd /mnt/cdrom/Linux
[root@localhost root]#./uninstall.sh
such as Unified Driver Configurator
.
NOTE: The installation program runs automatically if you
have an autorun software package installed and configured.
3
4
Click Uninstall
.
Click Next
.
5
Click Finish.
29
Using Your Printer in Linux
Download from Www.Somanuals.com. All Manuals Search And Download.
Printers Configuration
Printers configuration has the two tabs: Printers and Classes
.
Using the Unified Driver
Configurator
Printers Tab
You can see the current system’s printer configuration by
clicking on the printer icon button on the left side of the Unified
Driver Configurator window.
Unified Linux Driver Configurator is a tool primarily intended for
configuring Printer.
After installing the Unified Linux driver, the Unified Linux Driver
Configurator icon will automatically be created on your desktop.
Switches to Printer
configuration.
Opening the Unified Driver
Configurator
Shows all of the
installed printer.
1
Double-click Unified Driver Configurator on the
desktop.
You can also click the Startup Menu icon and select
Samsung Unified Driver and then Unified Driver
Configurator
Press each button on the Modules pane to switch to the
corresponding configuration window.
.
Shows the status,
model name and
URI of your printer.
2
Printers Configuration button
You can use the following printer control buttons:
•
•
•
•
Refresh: renews the available printers list.
Add Printer: allows you to add a new printer.
Remove Printer: removes the selected printer.
Scanners Configuration button
(for MFP device only)
Ports Configuration button
Set as Default: sets the current printer as a default
printer.
•
•
Stop/Start: stops/starts the printer.
Test: allows you to print a test page to check if the
machine is working properly.
•
Properties: allows you to view and change the printer
properties. For details, see page 31.
You can use the onscreen help by clicking Help
After changing the configurations, click Exit to close the
Unified Driver Configurator.
.
3
30
Using Your Printer in Linux
Download from Www.Somanuals.com. All Manuals Search And Download.
Classes Tab
The Classes tab shows a list of available printer classes.
Configuring Printer Properties
Using the properties window provided by the Printers
configuration, you can change the various properties for your
machine as a printer.
1
Open the Unified Driver Configurator.
Shows all of the
printer classes.
If necessary, switch to Printers configuration.
Select your machine on the available printers list and click
2
3
Properties
.
The Printer Properties window opens.
Shows the status of the
class and the number of
printers in the class.
•
•
•
Refresh : Renews the classes list.
Add Class... : Allows you to add a new printer class.
Remove Class : Removes the selected printer class.
The following five tabs display at the top of the window:
Ports Configuration
In this window, you can view the list of available ports, check
the status of each port and release a port that is stalled in busy
state when its owner is terminated for any reason.
•
General: allows you to change the printer location and
name. The name entered in this tab displays on the
printer list in Printers configuration.
Connection: allows you to view or select another port. If
you change the printer port from USB to parallel or vice
versa while in use, you must re-configure the printer port
in this tab.
•
•
•
•
Driver: allows you to view or select another printer
driver. By clicking Options, you can set the default
device options.
Jobs: shows the list of print jobs. Click Cancel job to
cancel the selected job and select the Show completed
jobs check box to see previous jobs on the job list.
Classes: shows the class that your printer is in. Click
Add to Class to add your printer to a specific class or
click Remove from Class to remove the printer from the
selected class.
Switches to
ports
configuration.
Shows all of the
available ports.
Shows the port type,
device connected to
the port and status
4
Click OK to apply the changes and close the Printer
Properties Window.
•
•
Refresh : Renews the available ports list.
Release port : Releases the selected port.
31
Using Your Printer in Linux
Download from Www.Somanuals.com. All Manuals Search And Download.
The following four tabs display at the top of the window.
•
General - allows you to change the paper size, the paper
type, and the orientation of the documents, enables the
duplex feature, adds start and end banners, and changes
the number of pages per sheet.
Printing a Document
Printing from Applications
There are a lot of Linux applications that you are allowed to
print from using Common UNIX Printing System (CUPS). You
can print on your machine from any such application.
•
Text - allows you to specify the page margins and set the
text options, such as spacing or columns.
•
Graphics - allows you to set image options that are used
when printing images/files, such as color options, image
size, or image position.
1
From the application you are using, select Print from the
File menu.
•Device: allows you to set the print resolution, paper
source, and destination.
2
3
Select Print directly using lpr
In the LPR GUI window, select the model name of your
machine from the Printer list and click Properties
.
5
Click Apply to apply the changes and close the Properties
window.
Click OK in the LPR GUI window to start printing.
.
6
7
The Printing window appears, allowing you to monitor the
status of your print job.
Click.
To abort the current job, click Cancel
.
Printing Files
You can print many different types of files on the Samsung
machine device using the standard CUPS way - directly from
the command line interface. The CUPS lpr utility allows you do
that. But the drivers package replaces the standard lpr tool by
a much more user-friendly LPR GUI program.
To print any document file:
1
Type lpr <file_name> from the Linux shell command
line and press Enter. The LPR GUI window appears.
4
Change the printer and print job properties.
When you type only lpr and press Enter, the Select
file(s) to print window appears first. Just select any files
you want to print and click Open
.
2
3
In the LPR GUI window, select your printer from the list,
and change the printer and print job properties.
For details about the properties window, see page 32.
Click OK to start printing.
32
Using Your Printer in Linux
Download from Www.Somanuals.com. All Manuals Search And Download.
9
a Macintosh
Your machine supports Macintosh systems with a built-in USB
interface or a 10/100 Base-TX network interface card. When
you print a file from a Macintosh computer, you can use the
PostScript driver by installing the PPD file.
Installing Software for
Macintosh
The PostScript driver CD-ROM that came with your machine
provides you with the PPD file to use the PS driver, Apple
LaserWriter driver, for printing on a Macintosh computer.
1
Connect your machine to the computer using the USB
cable or the Ethernet cable.
NOTE: Some printers do not support a network
interface. Make sure that your printer supports a
network interface by referring to Printer Specifications
in your Printer User’s Guide.
2
3
Turn on your computer and the machine.
Insert the PostScript driver CD-ROM which came with your
machine into the CD-ROM drive.
4
Double-click the CD-ROM icon on your Macintosh
desktop.
This chapter includes:
5
6
7
Double-click the MAC_Installer folder.
• Installing Software for Macintosh
• Setting Up the Printer
• Printing
Double-click the MAC_Printer folder.
For Mac OS 8.6~9.2, double-click the Samsung LBP
Installer Classic icon.
For Mac OS 10.1 or higher, double-click the Samsung LBP
Installer OSX icon.
8
9
Click Continue
.
Click Install
.
10After the installation is finished, click Quit.
33
Using Your Printer with a Macintosh
Download from Www.Somanuals.com. All Manuals Search And Download.
Mac OS 10.1 or higher
1
Follow the instructions on “Installing Software for
Macintosh” on page 33 to install the PPD file on your
computer.
Utilities folder.
Set up for your printer will be different depending on which
cable you use to connect the printer to your computer—the
network cable or the USB cable.
2
3
4
Click Add on the Printer List.
For a Network-connected Macintosh
Select the AppleTalk tab.
The name of your machine appears on the list. Select
SEC000xxxxxxxxx from the printer box, where the
xxxxxxxxx varies depending on your machine.
NOTE Some printers do not support a network
:
interface. Before connecting your printer, make sure
that your printer supports a network interface by
referring to Printer Specifications in your Printer User’s
Guide.
5
6
Click Add
If Auto Select does not work properly, select Samsung in
Printer Model and your printer name in Model Name
.
.
Your machine appears on the Printer List and is set as the
default printer.
Mac OS 8.6 ~ 9.2
1
Follow the instructions on “Installing Software for
Macintosh” on page 33 to install the PPD file on your
computer.
For a USB-connected Macintosh
Mac OS 10.1 or higher
2
3
From the Apple menu, select Chooser.
1
Follow the instructions on “Installing Software for
Macintosh” on page 33 to install the PPD file on your
computer.
Click LaserWriter 8 (the PostScript driver provided with
your Macintosh).
The name of your machine appears on the list.
Select SEC000xxxxxxxxx from the printer box (where
the xxxxxxxxx varies depending on each of the machines)
2
Open Print Center or Printer Setup Utility from the
Utilities folder.
4
3
4
5
6
Click Add on the Printer List.
and Click Select
If Auto Setup does not work properly, click Select PPD
choose your printer name, and click OK
.
Select the USB tab.
,
.
Select your printer name and click Add
If Auto Select does not work properly, select Samsung in
Printer Model and your printer name in Model Name
.
5
When the setup is complete, you see your machine icon
created as a desktop printer.
.
6
7
Close the Chooser
When a message window appears telling you that you
have changed your current machine, click OK
.
Your machine appears on the Printer List and is set as the
default printer.
.
34
Using Your Printer with a Macintosh
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing Printer Settings
You can use advanced printing features when using your
printer.
Printing
From your Macintosh application, select Print from the File
menu. The printer name which appears in the printer properties
window may differ depending on the printer in use. Except for
the name, the composition of the printer properties window is
similar.
NOTES
:
• The Macintosh printer’s properties window that appears in
this User’s Guide may differ depending on the printer in use.
However the composition of the printer properties window is
similar.
• You can check your printer name in the supplied CD-
ROM.
Layout Setting
The Layout tab provides options to adjust how the document
appears on the printed page. You can print multiple pages on
one sheet of paper.
Select Layout from the Presets drop-down list to access the
following features. For details, see “Printing Multiple Pages on
One Sheet of Paper” on the next column.
Printing a Document
When you print with a Macintosh, you need to check the printer
software setting in each application you use. Follow these steps
to print from a Macintosh.
1
2
3
Open a Macintosh application and select the file you want
to print.
Open the File menu and click Page Setup (Document
Setup in some applications).
Choose your paper size, orientation, scaling, and other
options and click OK
.
Make sure that your
printer is selected.
▲
Mac OS 10.3
▲
Mac OS 10.3
4
5
Open the File menu and click Print.
Choose the number of copies you want and indicate which
pages you want to print.
6
Click Print when you finish setting the options.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Printer Features Setting
The Printer Features tab provides options for selecting the
paper type and adjusting print quality.
Printing Multiple Pages on One Sheet
of Paper
You can print more than one page on a single sheet of paper.
This feature provides a cost-effective way to print draft pages.
Select Printer Features from the Presets drop-down list to
access the following features:
1
2
From your Macintosh application, select Print from the
File menu.
Select Layout
.
▲
Mac OS 10.3
Reverse Duplex
Allows you to select general print order compare to duplex print
order.
Fit to Page
This printer feature allows you to scale your print job to any
selected paper size regardless of the digital document size. This
can be useful when you want to check fine details on a small
document.
Paper Type
▲
Mac OS 10.3
Set Type to correspond to the paper loaded in the tray from
which you want to print. This will let you get the best quality
printout. If you load a different type of print material, select the
corresponding paper type.
3
4
Select the number of pages you want to print on one sheet
of paper on the Pages per Sheet drop-down list.
Select the page order from the Layout Direction option.
Resolution(Quality)
To print a border around each page on the sheet, select
the option you want from the Border drop-down list.
Click Print, and the printer prints the selected number of
pages on one side of each page.
The Resolution options you can select may vary
depending on your printer model. You can select the
printing resolution. The higher the setting, the sharper the clarity
of printed characters and graphics. The higher setting also may
increase the time it takes to print a document.
5
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Duplex Printing
You can print on both sides of the paper. Before printing in the
duplex mode, decide on which edge you will be binding your
finished document. The binding options are:
Long-Edge Binding: Which is the conventional layout
used in book binding.
Short-Edge Binding: Which is the type often used with
calendars.
1
2
From your Macintosh application, select Print from the
File menu.
Select the Layout
.
▲
Mac OS 10.3
3
Select a binding orientation from Two Sided Printing
option.
4
Click Print and the printer prints on both sides of the
paper.
CAUTION If you have selected duplex printing and
:
then try to print multiple copies of a document, the
printer may not print the document in the way you
want. In case of "Collated copy" , if your document has
odd pages, the last page of the first copy and the first
page of the next copy will be printed on the front and
back of one sheet. In case of "Uncollated copy", the
same page will be printed on the front and back of one
sheet. Therefore, if you need multiple copies of a
document and you want those copies on both sides of
the paper, you must print them one at a time, as
separate print jobs
.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
INDEX
Macintosh 35
Windows 13
installing 23
print
A
advanced printing, use 18
document 12
fit to page 20
from Macintosh 35
from Windows 12
N-up
driver, install 28
printer properties 31
printing 32
B
booklet printing 19
Macintosh 36
Windows 18
overlay 22
M
D
Macintosh
driver
document, print
Macintosh 35
scaling 20
watermark 21
printer driver, install
Linux 28
printer properties
Linux 32
printer properties, set
Macintosh 35
Windows 13, 23
printer resolution, set
Macintosh 36
install 33
printing 35
Windows 12
double-sided printing 20
setting up the printer 34
MFP driver, install
Linux 28
E
Extras properties, set 16
N
n-up printing
Macintosh 36
Windows 18
F
favorites settings, use 17
Windows 15
printer software
install
G
O
Macintosh 33
Graphics properties, set 15
orientation, print 32
Windows 13
overlay
Windows
4
uninstall
Windows 11
printing
H
create 22
delete 22
print 22
booklets 19
double-sided 20
from Linux 32
help, use 17, 23
I
P
install
R
printer driver
Macintosh 33
Paper properties, set 14
paper size, set 14
print 32
resolution
printing 32
Windows
4
installing
Linux software 28
paper source, set 32
Windows 14
S
setting
paper type, set
Macintosh 36
L
print 32
poster, print 19
PostScript driver
darkness 15
favorites 17
image mode 15
language, change 10
Layout properties, set
38
Download from Www.Somanuals.com. All Manuals Search And Download.
resolution
Macintosh 36
Windows 15
toner save 15
true-type option 15
software
install
Macintosh 33
Windows
reinstall
4
Windows 10
system requirements
Macintosh 33
uninstall
Windows 11
status monitor, use 26
T
toner save, set 15
U
uninstall, software
Windows 11
uninstalling
MFP driver
Linux 29
W
watermark
create 21
delete 21
edit 21
print 21
39
Download from Www.Somanuals.com. All Manuals Search And Download.
GGGGGGGGGGGGGRev. 3.00
Download from Www.Somanuals.com. All Manuals Search And Download.
|
Radio Shack Portable CD Player CD 3904 User Guide
Radio Shack Portable CD Player CTR 98 User Guide
Roland Recording Equipment SCWS03 User Guide
Samsung Air Conditioner E R DB68 01448A5 User Guide
Samsung TV Mount WMN4675MD User Guide
Sanyo Cordless Telephone CLT J40 User Guide
Sanyo Digital Camera VPC PD1EX User Guide
Sanyo Home Security System Vcc 4344 User Guide
Seal a Meal Beverage Dispenser VSWB3 User Guide
Seiko Watch 5M62 User Guide