T6 CAN E Cover0.0 2/14/05 8:4812:0 Page 2
SAMSUNG ELECTRONICS CANADA, INC.
HEADQUARTERS
7037 Financial Drive, Mississauga, Ontario, Canada L5N 6R3
TEL: 1-905-542-3535
- MP3, WMA, ASF, Secure WMA and Ogg Playback
- Removable Storage Device
- Direct MP3 Recording
- FM Reception
- 3D Sound
- USB 2.0 Support
- Upgradable
SERVICE DIVISION
7037 Financial Drive, Mississauga, Ontario, Canada L5N 6R3
1-800-SAMSUNG (1-800-726-7864)
- 20 Hours of Continuous Play
- Voice Recording Function
AH68-01633S(Rev 0.0)
Download from Www.Somanuals.com. All Manuals Search And Download.
T6 CAN ENG0.0 1/18/05 13:1412:0 Page 4
Safety Instructions
Safety Instructions
Read and understand all the instructions to avoid injury to yourself and damage to the equipment.
I Earphones
Do not expose to extreme temper-
atures (above 95°F or below 23°F). impact, or place heavy objects
Do not subject the unit to severe
Do not let any foreign matter spill
into the device.
Follow Traffic Safety Instructions
● Do not use the earphones while driving an automobile or riding a bicycle.
It’s not only dangerous, but also against the law.
Do not expose to moisture.
on it.
● To avoid an accident, do not turn up the volume of the earphones too high while walking.
Protect your ears
● Do not turn up the volume too high. Doctors warn against prolonged exposure to high volume.
● Stop using the device or turn the volume down if you have ringing in your ears.
Be careful not to subject the
player to excessive pressure
when wearing it round your neck.
Do not expose to chemicals such
as benzene and thinners.
Remove batteries when the
device is left unused for a long
period of time.
I Ambient operating conditions
● Ambient temperature : 5°C ~ 35°C (41°F ~ 95°F)
Humidity : 10 ~ 75%
I Environmental Information
● Follow local guidelines for waste disposal when discarding packages, batteries,
Do not expose to direct sunlight
or heat sources.
Do not store in dusty areas.
Do not try to disassemble and
repair the device yourself.
and old electronic appliances.
● Your player is packaged with cardboard, polyethylene etc., and does not use any unnecessary materials.
● Please be aware that we claim no responsibility for damage from data loss
due to breakdown, repair or other causes.
4
5
Download from Www.Somanuals.com. All Manuals Search And Download.
T6 CAN ENG0.0 1/18/05 13:1412:0 Page 6
Features
Features
MP3, WMA, ASF, Secure WMA and Ogg Playback
3D Sound
●
The player supports playback of MP3, WMA, ASF, Secure WMA and Ogg(Ogg Vorbis)
●
The 3D surround(SRS) feature adds spaciousness to the sound.
● OGG is a new audio compression format that is free, open and unpatented.
USB 2.0 Support
●
Maximum data speed transfer of 18 Mbps.
Rem ovable Storage Device
Upgradable
●
You can easily copy and paste files to the player using Windows Explorer.
●
You can upgrade the built-in programs when available.
Add functions, CODEC, etc. Please check the home page
Direct MP3 Recording
●
You can convert music from CDs, cassettes, and radio into
MP3 files without a PC.
20 Hours of Continuous Play
●
This player uses one AAA/LR03 alkaline battery. Operation can last up to 20hours.
Actual playing time may vary according to the type and capacity of the battery.
FM Reception
●
Listening to an FM program is made easy with Auto Search and
Frequency Memory functions.
Voice Recording Function
●
You can make high quality voice recordings.
6
7
Download from Www.Somanuals.com. All Manuals Search And Download.
T6 CAN ENG0.0 1/18/05 13:1412:0 Page 8
Com ponents
Location of Controls
Neck strap Hook
Display
MENU, Navigation button/
Move to Track/Speed Search/
Volume Button
Earphone
Carrying case
Neck Strap
Installation CD
Loop Repeating Button
Play/Pause Button
Hold Switch
Player
Recording Button
Microphone
One Battery
(1.5V AAA/LR03 type)
Line In Cable
USB Cable
Direct Connect
USB Adapter
User manual
Model
Built-in memory
YP-T6 H
128MB
YP-T6 V
256MB
YP-T6 X
512MB
YP-T6 Z
1GB
USB Cable
Battery Cover
Earphone Jack
Connection Port
● The capacity of the useable built-in memory is less than indicated as the internal firmware
uses part of the memory as well.
ENC Jack
● The accessories' design is subject to change for the purpose of improvement, without notice.
Continued...
8
9
Download from Www.Somanuals.com. All Manuals Search And Download.
T6 CAN ENG0.0 1/18/05 13:1412:0 Page 10
Location of Controls
Connecting the player to PC
ꢀSystem Requirements.
I Display
Note
●
- Install the operating system in Administrator Account
(main user) for Windows 2000 or XP.
The PC system must meet the
following specifications:
● Pentium 200MHz or greater
● Windows 98 SE/ME/2000/XP
● 40MB of available hard disc space
● CD-ROM drive
(double speed or greater)
● USB port (2.0) supported
● VGA graphic
Equalizer, SRS indicator
Track Number indicator
Play mode indicator
Otherwise, installation will not be completed.
- Windows ME, 2000 and XP can recognize the driver
without installing the provided program. However,
you must install the program in order to format the player
and upgrade firmware.
- If the YP-T6 program has not been installed in Windows
98, then it will not communicate with your removable disc.
You must install the USB driver file first.
Play/Stop/Pause indicator
Remaining Battery Power indicator
Title (track & artist) indicator
Playtime indicator
Before connecting the player to PC, make sure to install USB driver. If “Add New Hardware
Wizard” appears, press the [Cancel] button and install the USB driver.
I Inserting the Battery
I Installing software
1
2
Slide the cover in the direction of
the arrow to open.
1
Insert the Installation CD into the
CD-ROM drive.
Insert a battery to the right poles
Select [Install Player USB Driver].
+ , – and push-close the cover in
the direction of the arrow as indicated.
Note
●
- Do not place heavy objects on the cover.
Continued...
10
11
Download from Www.Somanuals.com. All Manuals Search And Download.
T6 CAN ENG0.0 1/18/05 13:1412:0 Page 12
Connecting the player to PC
Connecting the player to PC
I Connecting the player to PC with the USB cable
2
Follow the instructions in the window to complete the installation.
1
Connect the USB cable or Direct Connect USB adapter to the USB port on
the computer.
2
Connect the other end of the USB cable or adapter to the USB cable connection
port on the bottom of the player.
● If you disconnect the USB cable from your PC while implementing a
command or initializing during USB driver installation, your PC may not
function correctly.
3
4
The USB driver is installed with a message saying that it is searching for a new
device. You may not see the display screen during installation.
Go to the device manager (see next page) to check that installation has been
successfully completed.
Upon installation of the USB driver "Samsung YP-T6 USB Device" will appear in
the [System Properties] ● [Device Manager].
USB cable
Direct Connect USB adapter
Continued...
12
13
Download from Www.Somanuals.com. All Manuals Search And Download.
T6 CAN ENG0.0 1/18/05 13:1412:0 Page 14
Connecting the player to PC
Manual Installation of USB Driver
Go to “Downloading/Uploading files”(p18) if the USB driver is installed.
Follow these steps if the USB driver is not in installed :
How to check USB driver
Windows 98:
Control Panel ● System ● Device Manager ● Disc Drives ● Samsung YP-T6
I
When an error occurs during installation of the USB driver
Windows 2000/Windows XP:
1
Check the device manager.
Control Panel ● System ● Hardware ● Device Manager ● Disc Drives ●
Samsung YP-T6 USB Device
Windows 98,ME:
Control Panel ● System ● Device Manager
Windows 2000:
Control Panel ● System ● Hardware ●
Device Manager
Windows XP:
Control Panel ● System ● Hardware ●
Device Manager
2
3
Check if there is a device listed with an exclamation point or a question mark
(displayed as unknown device or USB device).
Double click on the device listed with an exclamation point or a question mark.
Note
●
- If you are using Windows 2000 and your version of Windows does not recognize the USB driver
please download and install the latest service pack from windowsupdate.microsoft.com
5
When the USB driver is not installed automatically, refer to the next page.
- The installation method may vary depending on the type of PC or operating system.
Contact your PC dealer or service center for installation information.
- If errors occur continuously when you install the USB driver, reconnect the USB cable after
rebooting your system.
14
15
Download from Www.Somanuals.com. All Manuals Search And Download.
T6 CAN ENG0.0 1/18/05 13:1412:0 Page 16
Manual Installation of USB Driver
Manual Installation of USB Driver
4
After selecting the driver,
click [Update Driver].
5
Click [Next].
I In Windows 98
Follow the instructions in the window to complete the installation.
USB driver location
[CD ROM]\setup\Drivers
6
Select [Search for a suitable driver
for my device] and then click [Next].
7
Click [Next] to finish.
: You must reboot your computer to complete the installation.
Note
●
- You cannot use the player as a removable disc in Windows 98 if the YP-T6 program is not installed.
Make sure to install the USB driver file first.
16
17
Download from Www.Somanuals.com. All Manuals Search And Download.
T6 CAN ENG0.0 1/18/05 13:1412:0 Page 18
Using the rem ovable storage(PC)
Using the rem ovable storage(PC)
Notice
●
I Formatting on your PC
- The “WRITING/READING” message will
appear during file download or upload.
Disconnecting the USB cable while
“WRITING/READING” is displayed may
cause malfunction of the unit.
1
Select the removable disc icon
and click the right mouse button
to select [Format].
2
Press the [Start] button.
● All saved files will be formatted.
● You can change the name of removable disc
by selecting [Volume label].
- The music file order displayed in Windows
Explorer may differ from the play order on
your device.
I Disconnecting the USB cable
After completing the file transfer, you must disconnect the cable in the following way:
Note
●
1
2
Double-click on the green arrow in the taskbar on the
bottom right of the window.
- By formatting, all previously preset menus will be reset,
and any pre-existing song or data files will be erased.
- Care must be taken as formatted files can not be recovered.
I Downloading/Uploading files
When the
1
2
Connect the player to your PC with the supplied USB cable.
[Stop a Hardware device]
message appears, press
the [OK] button and
disconnect the USB cable.
Open Windows Explorer on your PC.
● Removable Disc is displayed in Windows Explorer.
3
Select the file to save and drag-and-drop it into the removable disc icon.
(Files will appear In numerical, alphabetical order)
● If you change the name of music files in Windows Explorer to 001* * * , 002* * *...,
music files will be played in the order of number indicated.
Continued...
18
19
Download from Www.Somanuals.com. All Manuals Search And Download.
T6 CAN ENG0.0 1/18/05 13:1412:0 Page 20
Using the rem ovable storage(PC)
Using the rem ovable storage(PC)
I Downloading Secure WMA Files
Make sure to download the Secure WMA file you purchased from a ● pay site
2
Click [Copy to CD or Device]
from the left menu.
3
The list of songs selected in step 1
will appear in the left window.
through Windows Media Player Version 9 or higher.
● pay site :
2
Click the down arrow under
[Items on Device] in the right window to
change it to [Removable Disk] and then
1
press the
button on the upper part
1
Select the Secure WMA file and right-click to select [Play] or
[Play with Media Player].
to
download the selected file.
3
Make sure to use Media Player 9.0
or higher to play Secure WMA
files downloaded from a pay site.
Click the [Check for Player Updates]
button in the Help menu to update the
player to the latest version.
20
21
Download from Www.Somanuals.com. All Manuals Search And Download.
T6 CAN ENG0.0 1/18/05 13:1412:0 Page 22
Installing Music Studio
Using Music Studio
Music Studio is a program that enables you to play back music files on your PC.
1
Insert the Installation CD into CD-ROM drive.
Select [Install Samsung Music Studio].
2
Select language
I Playing Music
1
Double click the Music Studio icon on your PC.
Main Window
Play List Window
File List Window
3
Follow the instructions in the window to complete the installation.
● Please refer to Help for more in formation on how to use Music Studio.
2
Click the [Open Files] button in the main window to open the [Open]
dialog box and select the music files you want to play back.
Then click the [Open] button.
● The Selected files are automatically played back.
22
23
Download from Www.Somanuals.com. All Manuals Search And Download.
T6 CAN ENG0.0 1/18/05 13:1412:0 Page 24
Using Music Studio
Using Music Studio
I Creating an Album
4
5
After creating the New Album, click the [To HDD Mode] button in the File
List Window to select music files stored in your computer.
1
2
Double click the Music Studio icon on your PC.
Click the [To Album List] button in the Play List Window.
● The Album List Window appears.
Drag and drop the selected music files into the Play List Window.
3
Click your right mouse button to select [New Group] which opens the
[New Album] dialog box. Assign a new name and an image for the new album.
Note
●
- To change the Name and Image for an Album,
click the [Properties] button in the Play List Window.
Continued...
24
25
Download from Www.Somanuals.com. All Manuals Search And Download.
T6 CAN ENG0.0 1/18/05 13:1412:0 Page 26
Using Music Studio
To View Help on Music Studio
Run Music Studio and press F1.
I Converting Music File Formats
● Help will appear.
1
2
Double click the Music Studio icon on your PC.
Move the arrow to the top of Music Studio and right click on the
mouse. The following selection window will appear.
Insert an audio CD into your CD drive and click the [To CD-ROM Mode]
button in the File List Window.
● Click on Help and the Help window will appear.
3
After selecting the tracks to be converted, click with the right mouse button to
choose the file format.
● The tracks are converted into the selected format.
Note
●
- Music recognition technology and related data are provided by Gracenote and Gracenote
CDDB® Music Recognition ServiceSM.
- CDDB is a registered trademark of Gracenote. The Gracenote logo and logotype,
the Gracenote CDDB logo and logotype, and the "Powered by Gracenote CDDB" logo are
trademarks of Gracenote. Music Recognition Service and MRS are service marks of Gracenote.
Note
●
- Converted files are saved in the folder C:\My Music.
26
27
Download from Www.Somanuals.com. All Manuals Search And Download.
T6 CAN ENG0.0 1/18/05 13:1412:0 Page 28
Playing Music and Turning Off the Device
HOLD Function
In Hold mode, all buttons are disabled.
I Turning Power On and Off
Power On : Press the
Power Off : Press and hold the
button to turn on the power.
Slide the
switch in the direction of the arrow.
button to turn off the power.
● When the button is pressed, the “
HOLD!” message will appear on the display.
I Playing Music (Power On)
Press the
button.
● Playback starts automatically.
Recording Voice
Note
●
- USB cable must be disconnected from the player.
● To move to other modes from the Voice mode,
refer to page 37 “Changing Mode”.
I Pausing Music (Power Off)
Press the
button to pause playback.
1
2
Press and hold the REC button to start voice recording.
● If no buttons are pressed within 10 seconds (or custom settings),
the player automatically powers off.
Press the REC button again to stop the recording and save the voice file.
● While in Pause mode, press the
button again to resume playback.
I Adjusting the Volume
Push the joystick up or down to adjust the volume
from 00 to 30.
Note
●
- The files are recorded in the order of V001,V002......,
and saved as WAV file in the VOICE folder after recording.
Note
●
- If the file name is not displayed correctly, move to [Settings] ● [Display] ● [Language] and
then change the language setting.
- If the Memory is full, Voice Recording will be disabled automatically.
- Voice Recording does not work in FM Mode or when the Line In cable is connected.
- WMA files can only be played as music files with a compression rate of 48Kbps-192Kbps.
- The power off time can be set in the menu. (refer to page 51)
28
29
Download from Www.Somanuals.com. All Manuals Search And Download.
T6 CAN ENG0.0 1/18/05 13:1412:0 Page 30
MP3 Encoding
Searching for Music/ Voice Files
● To move to other modes from the LINE_ENC mode,
ꢀꢀTo search for specific parts during play
refer to page 37 "Changing Mode"
● Push and hold the joystick left or right during playback to search for
the part you want to listen to.
1
Connect the Audio Output port on the external audio source
(or the Line Out port) to the ENC port on the device with the Line cable.
● Release the joystick to resume play normally.
ꢀꢀTo change tracks during play
● Push the joystick to the
position briefly during playback to play the next track.
position briefly within 5 seconds after playback starts,
● Push the joystick to the
to move to and play the previous track. Press the joystick to the
after five seconds to play the current track from the beginning.
position briefly
2
3
Press and hold the REC button to start MP3 encoding.
●
If the
button is pressed, encoding is paused and if the
button is pressed again,
ꢀꢀTo change tracks when stopped/paused
the encoding resumes.
● Push the joystick left or right in stop/pause mode to move
to the previous/next track.
If the REC button is pressed during encoding, the encoding stops and an
encoding file is created.
●
The files are encoded in the order of L001, L002....
Note
and saved as MP3 file in LINE_ENC folder after encoding.
●
- VBR(Variable Bit Rate) file: A file that constantly changes the compression rate according
to the type of sounds, such as their pitch, in the file.
Note
●
●
- Bit Rates can be set within the range of 32Kbps~128Kbps. (see page 50).
- When playing a VBR file, you cannot move to and play the previous track even if you push
the joystick to the
position within 5 seconds after playback starts.
- Volume can be adjusted while monitoring the Encoding.
- Files that were downloaded in MP2 or MP1 and had their file extension changed to MP3
may not play.
Notice
- Do not disconnect the Line cable during Encoding.
- If the battery is not sufficiently charged, the player will not completely encode the file.
- Adjust the volume of the external audio source to a suitable level and encode it.
If the volume level is too high, the sound quality may be poor.
30
31
Download from Www.Somanuals.com. All Manuals Search And Download.
T6 CAN ENG0.0 1/18/05 13:1412:0 Page 32
Listening to FM Radio
Listening to FM Radio
Press the "M" button to display the menu screen.
Press the joystick down to select FM Radio and press the "M" button again.
I Searching Stored Frequencies
1
Press the “M” button in FM Mode.
● PRESET screen will appear.
I Manual Search for a Frequency
● Push the joystick left or right briefly to search
2
Use to move to the frequency you want.
,
manually for the frequency you want.
I Automatic Search for a Frequency
● Push and hold the joystick left or right to search for and stop at
Note
●
- You can store up to 20 frequencies.
frequencies with reception.
- Press the “M” button in the PRESET screen to exit the PRESET mode.
I Manual Storage of a Frequency
● After searching manually for the frequency you want,
I Deleting Stored Frequencies
press the A●B button to display the save screen.
1
After moving to the PRESET number you want to delete,
press and hold the A●B button.
● Push joystick left or right to select the number you
want to assign to save the frequency and then
press the A●B button.
2
After selecting the “Y”, press the “M” button.
● The saved PRESET number will be deleted.
I Automatic Storage of a Frequency
● Press and hold the A●B button while in FM Mode.
● Frequencies within the range of 87.5MHz to
108.0MHz are automatically selected and stored.
I Mute Function
1
Press the
button in FM mode.
● ”MUTE” is displayed and no sound is heard.
● Frequencies are automatically stored, starting from 1.
Number of channels saved.
2
Press the button again.
● Mute function is released.
Note
●
- To exit from FM Mode press the “M” button in the center.
- Mono (MO) or Stereo (ST) is automatically selected.
32
33
Download from Www.Somanuals.com. All Manuals Search And Download.
T6 CAN ENG0.0 1/18/05 13:1412:0 Page 34
FM Encoding
MENU Options
1
2
Press and hold the REC button during FM reception.
● Encoding of the currently transmitted FM broadcast begins.
Press and hold the “M” button to switch to MENU mode.
Use to move and press the “M” button briefly to select the menu you want.
,
Press the REC button again.
● A file is created and the encoding stops.
Press and hold the “M” button to exit the MENU mode.
● Files are encoded in the order F001, F002, F003...and saved as MP3 files in FM_ENC
folder.
Loop Repeating
ꢀꢀStarting Point
While playing music files, press the A●B button
● Now playing : To check the file currently playing.
● FM Radio : To listen to FM radio.
● Navigation : To move to Navigation Mode and browse files and folders.
● Playlist : To play back only the files you want
● Settings : To set the functions (refer to page 40).
● Exit : To exit MENU.
briefly at the beginning of the loop you want to set.
A● appears in the display.
ꢀꢀEnding Point
Press the A●B button briefly again to set the
end of the loop.
A●B appears in the display.
The loop is played repeatedly.
Note
●
Note
●
- Menu mode will be cancelled if no buttons are pressed within 15 seconds
- Press the A●B button briefly to cancel the loop.
- Loop Repeat is automatically released if you Speed Search with
,
.
34
35
Download from Www.Somanuals.com. All Manuals Search And Download.
T6 CAN ENG0.0 1/18/05 13:1412:0 Page 36
Using Navigation
Using Navigation
You can easily search for files or switch modes using the Navigation function.
I Changing Mode
You can change the mode in the following method.
Ex) To change from the Voice mode to the Music mode
1
2
Press the “M” button to enter Navigation mode.
(except if you are in FM radio mode).
or press and hold the “M” button to move to Menu and then select
Navigation in Menu.
1
2
3
Press the “M” button in the
Voice mode.
Select the file or folder that you want to play.
●
●
●
●
: When moving to a higher-level folder.
Use
to move to the upper folder.
: When moving to a lower-level folder.
,
: When moving to a file or folder in the same directory.
: Move to the next folder down. When there is not a lower folder,
the selected file will be designated as part of the playlist.
Use
,
to move to the music file you want and press the
button.
● As it is changed to the Music mode, the selected file will be played.
3
Press the
button.
● The selected file will be played.
Note
●
Note
●
-
To change to the FM mode, refer to “Menu Options”.
- Press and hold the “M” button in Navigation mode to exit the Navigation mode.
- Root is the lowest level of memory where files are stored. It is similar to the C drive on your PC.
36
37
Download from Www.Somanuals.com. All Manuals Search And Download.
T6 CAN ENG0.0 1/18/05 13:1412:0 Page 38
Using Navigation
Setting Playlist
I Playing/Exiting Folder
I Setting Playlist
- Move to the file you want in Navigation mode and press the “M” button.
ꢀꢀPlaying Folder
● The selected file will be marked.
1
2
Press the “M” button to move to the Navigation mode.
● To exit the playlist setting,
move to the marked file in Navigation mode and press the “M” button again.
Use
,
to move to the folder you want and press the
" appears, the selected file will be played.
button.
● When "
I Playing Playlist
ꢀꢀExiting Folder Play
1
2
Press and hold the A●B button in music mode or select Playlist in Menu.
● The playlist you set will be displayed.
1
2
Press the “M” button during folder playback to move to the Navigation mode.
Move to the file you want to play and press the
● “ ” mark appears and the selected file will be played.
button.
Use
,
to move to the file you want and press the
button.
● After folder play is exited, "
" mark will appear and the selected file will be played.
38
39
Download from Www.Somanuals.com. All Manuals Search And Download.
T6 CAN ENG0.0 1/18/05 13:1412:0 Page 40
Setting the Advanced Functions
Selecting the Play m ode
1
2
Select Settings in the MENU. (refer to “MENU Options”)
In Settings, use to move to the function you want and
1
2
Press and hold the "M" Button. Select Settings ● Play Mode.
,
In Play mode, use
,
to move to the mode you want and press
press the “M” button to select.
the “M” button to select.
● To move to a previous menu, use
or select Return.
● Normal: To play all the tracks in order one time.
● Repeat one: To repeat one track.
● Repeat all: To repeat all tracks.
● Shuffle: To play tracks at random.
● Intro: To listen to the first part of all saved tracks for 10 seconds.
● Return: To move to a previous menu
40
41
Download from Www.Somanuals.com. All Manuals Search And Download.
T6 CAN ENG0.0 1/18/05 13:1412:0 Page 42
Setting the EQ m ode
Setting the EQ m ode
1
2
Press and hold the "M" button. Select Settings ● My Sound.
I WOW Set
In My Sound, use
,
to move to the sound mode you want and press
●
Use
,
to select the SRS function you want and
the “M” button.
then press the “M” button.
●
The SRS function is applied only when you select the
SRS, TruBass or WOW in the Preset EQ.
● SRS :
You will hear 3D Stereo sound.
Use to adjust SRS from 0 to 10.
I Preset EQ
,
● Use
,
to move to the sound mode you want and then press the “M” button.
● TruBass : This is a bass boost feature that adds fullness
● SRS ● TruBass ● WOW ● Normal ● Classic ● Jazz ● Rock ● User
to the sound.
● Select User EQ Set to set the EQ as desired.
Use
You can enjoy clearer tone during playback.
Use to set Focus and then
,
to adjust TruBass from 0 to 10.
● Focus :
,
press the “M” button. The chosen frequency
band will be boosted.
High ● Middle ● Low
I Bass Booster
● Use
,
to select Bass Booster On or Off and then
● Optimum : Optimize the SRS function according to the device
press the “M” button.
connected to the main unit.
Use
,
to move to the connected device and
● Bass Booster function is applied only when you select
Normal, Classic, Jazz or Rock in the Preset EQ.
● On: When the music is played back, the bass is
enhanced in the preset sound.
then press the “M” button.
Earphone ● Headphone ● Speaker
● Carpack(Car Cassette Adapter)
● Off: Music is played back in the preset sound.
42
43
Download from Www.Somanuals.com. All Manuals Search And Download.
T6 CAN ENG0.0 1/18/05 13:1412:0 Page 44
Setting the EQ m ode
Display Settings
I User EQ Set
Press and hold the "M" button. Select Settings ● Display
● If User is selected in Preset EQ, EQ can be set to your
preference in the User EQ Set.
ꢀꢀScroll Speed
● Use
,
to set the scroll speed from X1 to X5 to adjust
● Use
,
to move to right or left and use
,
to
the speed of the track title movement.
adjust the level.
Press the “M” button after completing the setting.
ꢀꢀDisplay Time
Note
●
● Use
,
to select the display time.
-
is a trademark of SRS Labs, Inc.
WOW technology is incorporated under license from SRS labs, Inc..
● Count Up: Current playback time is displayed.
● Count Down: Remaining time from total playback time is
displayed.
- Please adjust the volume to a suitable level, as the volume may increase in the SRS setting.
- This unit supports sampling frequencies of 32KHz, 44.1KHz or 48KHz.
- The SRS function is not set for voice recording files.
● Total Time: Total playback time is displayed.
44
45
Download from Www.Somanuals.com. All Manuals Search And Download.
T6 CAN ENG0.0 1/18/05 13:1412:0 Page 46
Display Settings
Display Settings
Press and hold the "M"button. Select Settings ● Display
ꢀTag
● Use
,
to select Tag On or Off.
ꢀꢀBacklight
● On: Display the Tag information if the music file has Tag
information. Display the file name if the music file has no
Tag information.
[ Jog ]
● Use
Off to 60 seconds.
,
to set the
Light-On time from
● Off: Display the name of music file.
● When set to On, the Light stays on continuously.
[ LCD ]
ꢀLanguage
● Use
,
to select the language for displaying Tag information and menu.
● Use
Off to 60 seconds
,
to set the LCD Light-Off time from
● Chinese(S) ● Chinese(T) ● English ● French ● German ●
Italian ● Japanese ● Korean ● Russian ● Spanish
● When set to On, the Light stays on continuously.
ꢀꢀContrast
● Use
,
to set the contrast level from 0 to 10.
46
47
Download from Www.Somanuals.com. All Manuals Search And Download.
T6 CAN ENG0.0 1/18/05 13:1412:0 Page 48
Setting the System
Setting the System
Press and hold the "M" button. Select Settings ● System.
ꢀTuner Level
ꢀꢀResume
● Use
,
to select FM Tuner Sensitivity.
● Use
,
to select Resume On or Off.
● The higher the FM Tuner Sensitivity,
the more frequency it can receive .
● High ● Middle ● Low
● On: Play back will resume from the point it was
previously stopped.
● Off: Play back will resume from the beginning of the
file/track that was playing when stopped.
ꢀDefault Set
ꢀꢀDefault vol
● Use
,
to select Default Set Yes or No.
● Yes : All settings selected will revert back to
the player default settings.
● Use
0 and 30.
,
to set the default volume to a level between
● No : All settings selected will remain as they are.
● If the power is turned on again after having adjusted the
volume to a level above the default volume
(for example: 20) music is played at the default volume level.
ꢀAbout
● If the power is turned on again after having adjusted the volume at or below the default
● If you select About, you can check the software version
volume (for example: 20 or lower), the music is replayed at the previous volume.
information, total number of tracks and remaining capacity.
ꢀꢀTuner Region
Note
●
● Use
,
to select FM Tuner Region.
- Go to samsung.com for software updates.
● Worldwide : Search FM frequency between 88.0MHz to
108.00MHz in increments of 50 KHz.
● US : Search FM frequency between 88.0MHz to108.0MHz in
increments of 100 KHz.
● Japan : Search FM frequency between 76.0MHz to 108.0MHz
in increments of 100 KHz.
48
49
Download from Www.Somanuals.com. All Manuals Search And Download.
T6 CAN ENG0.0 1/18/05 13:1412:0 Page 50
Record Settings
Tim e Settings
Press and hold the "M" button. Select Settings ● Record.
Press and hold the "M" button. Select Settings ● Time
ꢀBitrate
ꢀꢀPower Off
● Use
,
to set the encoding bit rate.
● Use
,
to set the Power-Off time from 0 to 3 minutes.
● When encoding music into an MP3 file, you can select
one of the following bit rates: 32Kbps, 48Kbps, 64Kbps,
96Kbps and 128Kbps.
● If no button is pressed after play stops, the player will
automatically turn off after the time you set.
10
● When set to Off, it will not turn off automatically.
ꢀꢀAutoSync
ꢀꢀAuto Sleep
● Use
,
to set the AutoSync Time from 1 to 5 seconds.
● AutoSync Time is a function for separating and saving
MP3 files when there is no sound for a set time during
MP3 encoding.
● Use
,
to set the Sleep time to 15, 30, 60, 90, or 120.
The player will automatically turn off after the time you set.
● When set to Off, it does not turn off automatically.
● In SYNC 1 setting, encoding stops and it moves to Music Mode when
there is no sound for over 1 second during encoding.
● If AutoSync Time is set to Off, encoding keeps going even if there is
no sound, and then it is saved as one file.
ꢀꢀIntro Time
● Use
,
to set the Intro time to 10, 20, 30, or 60 seconds.
● When you select the Intro function(Press and hold "M" button.
Select Settings ● Play mode ● Intro), the beginning of all
files will be played back for the seconds you set.
50
51
Download from Www.Somanuals.com. All Manuals Search And Download.
T6 CAN ENG0.0 1/18/05 13:1412:0 Page 52
Managing Files
MENU Table
I Deleting
1
2
3
Press and hole the "M" button.
Select Settings File Delete.
●
●
Use
,
to move to the file you want to delete
and then press the “M” button.
Use to move to Confirm and then
,
press the “M” button.
● The selected file will be deleted.
I Formatting the player
1
2
Press the "M" button. Select Settings
●
File
●
Format
Use to move to Confirm and then
,
press the “M” button.
● The player will be formatted.
Note
●
- All files will be deleted when formatting the built-in memory.
- It is recommended that formatting be carried out on a PC that has the provided program installed
as formatting in the Menu may take a long time.
● Use the
button to move and select.
52
53
Download from Www.Somanuals.com. All Manuals Search And Download.
T6 CAN ENG0.0 1/18/05 13:1412:0 Page 54
Troubleshooting
Troubleshooting
The software doesn’t work
The player keeps being turned off.
● Refer to the System Requirements
● In Stop mode, the power is automatically turned off after ten seconds
(changes depending on settings).
● Check to see if there are files saved in it.
The player does not work and the LCD displays nothing.
● Check the battery capacity
● Check to see if the battery is inserted to the right poles ( + , – )
● After connecting it to PC, execute YP-T6 Updater in the desktop to update the product.
Something’s wrong with play time displayed during Play mode.
● “VBR SONG” message is displayed while VBR (Variable Bit Rate) file is playing.
LCD window is dark
In PLAY mode, music is not played after pressing the
button
● Check Contrast
● Check to see if MP3 or WMA files are saved in the built-in memory.
● Check to see if the HOLD button is locked.
The file name is not displayed correctly.
● Move to [Settings] ● [Display] ● [Language] in the Menu and then change the
language setting.
Files cannot be downloaded.
● Check to see if the driver is installed correctly in the computer.
● Check the connection between the player and PC.
● Check and/or replace the battery, turn on the play's power.
● Operating system limits the number of files you can save.
Please save your music files by creating a subfolder.
● Check if the memory is full.
There is a file saved in the player, but “No File” appears in the screen.
● After checking whether the folder is played, use the Navigation function to change
the folder.
● After connecting it to PC, execute YP-T6 Updater in the desktop to update the product.
I cannot properly connect the player to the PC.
● Win98 : try to connect again after installing Driver.
Backlight does not work.
● Check the backlight setup.
● WinME : remove the Driver program and press the Start in the desktop to execute
Windows Update. After selecting important update and service pack, execute update all.
● Win2000/XP : Try to connect it again after rebooting PC.
● When the battery power is low, the backlight will go out.
The buttons do not work.
● Check setting of Hold switch.
● Remove the battery once and then insert it again.
54
55
Download from Www.Somanuals.com. All Manuals Search And Download.
T6 CAN ENG0.0 1/18/05 13:1412:0 Page 56
Specifications
ELECTRONICS
S a m s u n g Lim it e d Wa rra n t y
Model
Built-in Memory capacity
Voltage
YP-T6
S a m s u n g Ele c t ro n ic s Ca n a d a In c . (S ECA),
warrants that this product is free from defective m aterial and workm anship.
128MB(YP-T6 H), 256MB(YP-T6 V), 512MB(YP-T6 X), 1GB(YP-T6 Z)
1.5V X 1 (AAA/LR03 size alkaline battery)
lasts up to 20hours (Alkaline battery, MP3 128Kbps, Vol level 15)
0.86” X 2.16” X 0.90” / 1.06oz (without battery)
Plastic/Aluminum
SECA further warrants that if this product fails to operate properly within the
specified warranty period and the failure is due to im proper workm anship or
defective m aterial SECA will repair or replace the product at its option.
Playing time
Dimensions/Weight
Case
All warranty repairs m ust be perform ed by a SECA authorized service
centre. (The nam e and address of the location nearest you can be obtained by
calling toll free 1 -8 0 0 -7 2 6 -7 8 6 4 or visiting our web site at w w w .s a m s u n g .c a )
Noise Ratio
89dB with 20KHz LPF
Earphones Jack Output Power 10mW/CH (16Ω)
Output Frequency Range 20Hz~20KHz
Operating Temperature Range -5 ~ +35°C(23~95°F)
La b o u r
P a rt s
o n e (1 ) ye a r (c a rry-in )
o n e (1 ) ye a r
FM Frequency
FM Signal to Noise Ratio
FM T.H.D
87.5 ~ 108.0 MHz
On carry-in m odels, transportation to and from the service centre is the
custom er’s responsibility.
62dB
1%
The original dated sales receipt m ust be retained by the custom er and
is the only acceptable proof of purchase. It m ust be presented to the
authorized service centre at the tim e service is requested.
FM Useable Sensitivity
File Support
10dB
MPEG1/2/2.5 Layer3(8Kbps ~ 320Kbps, 8KHz ~ 48KHz)
WMA, ASF (48Kbps ~ 192Kbps, 8KHz ~ 48KHz), Ogg
Exc lu s io n s
The product unit accompanying this user manual is licensed under certain intellectual property rights of certain
third parties. In particular, this product is licensed under the following US patents : 5,991,715, 5, 740,317,
4,972,484, 5,214,678, 5,323,396, 5,539,829, 5,606,618, 5,530,655, 5,777,992,6,289,308, 5,610,985,
5,481,643, 5,544,247, 5,960,037, 6,023,490, 5,878,080, and under US Published Patent Application No.
2001-44713-A1.
This warranty does not cover dam age due to accident, fire flood and/or
other acts of God; m isuse, incorrect line voltage, im proper installation,
im proper or unauthorized repairs, com m ercial use, or dam age that occurs in
shipping. Exterior and interior finish, lam ps and glass are not covered under this
warranty. Custom er adjustm ents which are explained in the instruction m anual
are not covered under the term s of this warranty. This warranty will autom atical-
ly be voided for any unit found with a m issing or altered serial num ber. This
warranty is valid only on products purchased and used in Canada.
This license is limited to private non-commercial use by end-user consumers for licensed contents.
No rights are granted for commercial use. The license does not cover any product unit other than this product
unit and the license does not extend to any unlicensed product unit or process conforming to ISO/IEC 11172-3
or ISO/IEC 13818-3 used or sold in combination with this product unit. The license only covers the use of this
product unit to encode and/or decode audio files conforming to the ISO/IEC 11172-3 or ISO/IEC 13818-3.
No rights are granted under this license for product features or functions that do not conform to the ISO/IEC
11172-3 or ISO/IEC 13818-3.
56
Download from Www.Somanuals.com. All Manuals Search And Download.
|