Samsung MP3 Player DVD V3500 User Guide

Instruction

Manual

DVD-V3500

POWER

EJECT

DVD/VCR PROGRESSIVE

www.samsungusa.com

Download from Www.Somanuals.com. All Manuals Search And Download.

Important Safety Instructions

WARNING:

Copy Notification

TO PREVENT DAMAGE WHICH MAY RESULT IN

FIRE OR ELECTRIC SHOCK HAZARD, DO NOT

EXPOSE THIS APPLIANCE TO RAIN OR

MOISTURE.

Federal law provides severe civil and criminal

penalties for the unauthorized reproduction,

distribution, or exhibition of copyrighted motion

pictures and videotapes. (Title 17, United States

Code, Sections 501 and 506).

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

WARNING:

TO AVOID HAZARDOUS EXPOSURE TO INVISIBLE

LASER RADIATION, DO NOT OPEN OR

REMOVE/DEFEAT LASER TRANSPORT

PROTECTIVE HOUSING.

Macrovision Notification

4. Follow all instructions.

This product incorporates copyright protection

technology that is protected by method claims of

certain U.S. patents and other intellectual property

rights owned by Macrovision Corporation and other

rights owners. Use of this copyright protection

technology must be authorized by Macrovision

Corporation, and is intended for home and other

limited viewing uses only unless otherwise authorized

by Macrovision Corporation. Reverse engineering or

disassembly is prohibited.

5. Do not use this apparatus near water.

6. Clean only with dry cloth.

USER/INSTALLER CAUTION:

Do not block any ventilation openings. Install in accordance with the manufacturer’s

instructions.

Your authority to operate this FCC certified equipment

could be voided if you make changes or modifications

not expressly approved by the manufacturer, who is

responsible for compliance with Part 15 FCC rules.

8. Do not install near any heat sources such as radiators, heat registers, or other

apparatus (including amplifiers) that produce heat.

9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized

plug has two blades with one wider than the other. A grounding type plug has two

blades and a third grounding prong. The wide blade or the third prong are provided for

your safety. If the provided plug does not fit into your outlet, consult an electrician for

replacement of the obsolete outlet.

NOTE TO CATV SYSTEM INSTALLER:

This reminder is provided to call the CATV system

installer’s attention to Article 820-40 of the National

Electronic Code that provides guidelines for proper

grounding and, in particular, specifies that the cable

ground shall be connected to the grounding system of

the building, as close to the point of cable entry as

practical.

CAUTION:

To prevent fire, shock hazard, or annoying

interference, use only the recommended accessories.

To prevent electric shock, do not use this (polarized)

plug with an extension cord, receptacle, or other outlet

unless the blades can be fully inserted to prevent

blade exposure. To reduce the risk of electric shock,

do not remove the unit cover or back. There are no

serviceable parts inside. Refer servicing to qualified

personnel only.

10. Protect the power cord from being from being walked on or pinched particularly at plugs,

convenience receptacles, and the point where they exit from the apparatus.

11. Only use attachments/accessories specified by the manufacturer.

12. Use only with cart, stand, tripod, bracket, or table specified by the manufacturer, or sold

with the apparatus. When a used, caution when moving the cart/apparatus combination

to avoid injury from tip-over.

CAUTION

CUIDADO:

Para prevenir incendio, riesgo de choque, o

interferencia enfadosa, use solamente los accesorios

recomendados. Para prevenir electrochoque, no use

este enchufe (polarizado) con un cordón de

extensión, toma de corriente, o cualquier otra toma a

menos que los dientes puedan ser completamente

insertados para prevenir exposición de los dientes.

Para reducir el riesgo de descarga eléctrica, no

remueva la cubierta o la parte posterior del equipo.

Dentro del equipo no hay partes que requieren

servicio. Diríjase solamente a personal calificado

cuando requiera servicio.

13. Unplug this apparatus. When a cart is used, use caution when moving the

cart/apparatus combination to avoid injury from tip-over.

14. Refer all servicing to qualified service personnel. Servicing is required when the

apparatus has been damaged in any way, such as power-supply cord or plug is

damaged, liquid has been spilled or objects have fallen into the apparatus, the

apparatus has been exposed to rain or moisture, does not operate normally, or been

dropped.

This symbol is intended to alert

the user to the presence of

uninsulated dangerous voltage

within the product’s enclosure

that may be of sufficient

magnitude to constitute risk of

fire or electric shock.

ATTENTION:

Pour éviter les incendis, risque de chocs, ou

interférences fâcheuses, employer seulement les

accessoires recommandés. Pour éviter les chocs

électriques, ne pas employer cette prise (polarisée)

avec une rallonge, une prise de courant ou une autre

sortie de courant à moins que les lames peuvent être

insérées à fond pour l’exposition des lames. Pour

réduire les risques de chocs électriques, ne pas retirer

le couvercle ou l'arrière du module. Il n'y a pas de

pièce utilisable à l'intérieur. Ne faire effectuer

l'entretien que par un personnel qualifié.

This symbol is intended to alert

the user to the presence of

important operating and

maintenance instructions in the

literature accompanying this

product.

Download from Www.Somanuals.com. All Manuals Search And Download.

Table of Contents

◆ Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

◆ 5 - DVD Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

◆

Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

◆

Disc Menu Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Audio Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Subtitle Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Digital Output. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

DTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

Dynamic Compression . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

PCM Down Sampling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

TV Aspect Ratio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Black Level . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

Alt Video Out . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

Parental . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

◆ Welcome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

◆

Feature Summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Unpack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Disc Type and Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

◆ 1 - System Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

◆

Front Panel Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

◆

Rear Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Front Panel Display. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Remote Control Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Insert Batteries into Remote . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Using the TV Buttons on the Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

◆ 6 - DVD Sound Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

A/V Receiver Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

◆

◆ 2 - Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Basic Connections/Auto Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

◆ 7 - DVD Operations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

◆

Special Playback Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

Disc Menu Navigation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

EZ View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

Title/Chapter/Time Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

Angle View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

Subtitle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

A to B Repeat . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

Repeat Chapter/Title . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

Audio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

Bookmarks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44

MP3/WMA Play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

Program Play & Random Play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47

Picture CD Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48

3D Sound . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50

Function (DVD) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51

◆ 3 - Basic Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

◆

Deck Control Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Basic DVD Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Basic VCR Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Basic TV Tuner Operations. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

◆ 4 - System Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

◆

On-Screen Menu Navigation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Menu Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Manual Clock Set . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Tuner Band Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

RF Output Channel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Auto Channel Memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Channel Add/Delete . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Front Panel Dimmer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Auto Power Off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

◆ 8 - VCR Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52

◆

Special VCR Playback Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52

Tracking. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52

Auto Play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53

S-VHS Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53

Variable Search System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54

Download from Www.Somanuals.com. All Manuals Search And Download.

Table of Contents

Feature Summary

DVD+VCR Features

• Perfect compatibility to play back DVDs, audio CDs, MP3 discs or VHS Tapes.

• Enjoy a DVD movie while recording a TV show to the VCR.

• Auto Setup instantly finds the time and runs channel search.

• RF inputs and outputs for all kinds of TVs available.

• Composite, S-Video, and Component Video outputs.

• Universal remote provides the full operation on DVD+VCR.

• On-Screen Program (English/French/Spanish).

◆ 9 - VCR Recording. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55

◆

Basic Recording . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55

Special Recording Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56

One Touch Recording (OTR) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57

Record Speed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57

DVD Features

◆ 10 - Timer Recording . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58

• 10-bit video digital to analog converter and 27MHz advanced digital filter.

• Playback of 96KHz/24-bit sources.

• DTS digital output for DTS-enhanced DVDs.

• Playback MP3-CDs.

◆

How to Set a Timer Recording . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58

◆

Function(VCR). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59

◆ Appendix A - Advanced Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60

VCR Features

• Hi-Fi Stereo VCR.

◆

S-Video/Component Video Connections (for DVD). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60

Stereo Connections. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61

Monitor TV Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62

Connecting Other Video Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63

• Superior slow motion and stop action (with 4 heads).

• Playback of S-VHS tapes with a better than standard resolution.

• INTRO Scan, Zero Return, and END Search.

• 7-event/1 month timer recording.

• Time remaining counter, real time counter.

◆ Appendix B - Help . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64

Note

◆

Technical Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64

*Discs which cannot be played with this player.

*Ability to play back may depend on recording

• DVD-ROM

• CD-ROM

• CDI

• DVD-RAM

• CDV

• SVCD

conditions.

• DVD-R

• CD-RW

• DVD+RW, -RW

• HD layer of Super Audio CD

• CDGs play audio only, not graphics.

Unpack

When you unpack the DVD+VCR, please check the following list of items is included in the

packing case.

DVD-VCR

Registration Card

(AD68-00078A)

User

(AK68-00135A)

’s Guide

EJECT

DVD/VCR PROGRESSIVE

RCA cable for

Audio/Video connection

(AC99-10500H)

RF (Radio Frequency)

Antenna Cable

(AC39-42001J)

1.5V

(AC43-12002H)

“AAA” Batteries- 2EA

Remote Control

(AK59-00008A)

Download from Www.Somanuals.com. All Manuals Search And Download.

Front Panel Overview

Disc Type and Characteristics

This DVD player is capable of playing the following types of discs with the corresponding logos:

Disc Types

(Logos)

Max.

Recording

Types

Disc Size

Characteristics

Playing Time

EJECT

Single-sided

240 min.

Double-sided

480 min.

• DVD contains excellent sound

and video due to Dolby Digital

and MPEG-2 system.

• Various screen and audio

functions can be easily

selected through the on-

screen menu.

DVD

DVD/VCR PROGRESSIVE

Audio

Video

Single-sided

80 min.

Double-sided

160 min.

31/2"

10 11 12 13 14

16 17 18

AUDIO-CD

• CD is recorded as a

Digital Signal with better

audio quality, less

distortion and less

deterioration of audio

quality over time.

74 min.

20 min.

Audio

DVD DECK

12 FAST-FORWARD/FWD

13 RECORD

DVD OPEN/CLOSE

VCR DECK

31/2"

14 EZ VIEW

CHANNEL

15 FRONT PANEL DISPLAY

DVD-VCR SELECT

PROGRESSIVE

VCR EJECT

POWER

16 LINE IN 2 COMPOSITE VIDEO JACK

17 LINE IN 2 LEFT AUDIO JACK

18 LINE IN 2 RIGHT AUDIO JACK

STOP

10 REWIND/REV

Disc Markings

11 PLAY/PAUSE

DIGITAL

SOUND

STEREO

NTSC

• Digital

Audio disc

• DTS disc

• MP3 disc

• Play

Region

Number

• NTSC broadcast

system in U.S.A,

Canada, Korea,

Japan, etc.

• Dolby

Digital disc

• Stereo disc

Play Region Number

Both the DVD player and the discs are coded by region. These regional codes must

match in order for the disc to play. If the codes do not match, the disc will not play.

The Region Number for this player is described on the rear panel of the player.

Download from Www.Somanuals.com. All Manuals Search And Download.

Remote Control Overview

Rear Panel

POWER

SHUTTLE <</>>

100+

POWER

OPEN/CLOSE

DVD

TV MUTE. AUDIO

VOLUME +/–

REWIND

SKIP BACK

STOP

SUBTITLE

10 MENU

11 UP

12 LEFT

13 DOWN

14 SPEED

15 RECORD

16 CLEAR

17 MODE

S-VIDEO OUT

LINE IN 1

DIGITAL AUDIO OUT(COAXIAL)

DIGITAL AUDIO OUT(OPTICAL)

COMPONENT VIDEO OUT

AUDIO LINE OUT TO TV

LINE OUT TO TV (COMPOSITE)

RF ANTENNA INPUT

RF OUT TO TV

REPEAT

18 OPEN/CLOSE

19 0-9

20 TV/VCR

21 VCR, TV SELECT

22 INPUT SEL

F.ADV/SKIP

23 CHANNEL

TRACKING

24 FAST-FORWARD

SKIP NEXT

25 PLAY/PAUSE

26 INFO.

27 RETURN

28 ENTER

29 RIGHT

30 EZ VIEW

31 DISC MENU

32 MARK

(S-VIDEO OR COMPONENT)

Front Panel Display

33 ANGLE

TIMER

STEREO

When the light is on, DVD is operating.

DVD or CD media is loaded.

A DVD with a DTS soundtrack is loaded.

The Hi-Fi track of a VHS videotape is playing

(The current TV program or video is broadcast in

Stereo.)

The time, counter position, time remaining or

current deck status is indicated.

Insert Batteries into Remote

Timer Recording is in progress.

VHS videotape is loaded.

VCR is activated.

It also blinks when you pause VCR.

• Remove the battery cover on the remote

• Insert two 1.5V “AAA” batteries as shown, making sure of the correct

polarities(+/-)

• Slide the cover back onto remote.

Download from Www.Somanuals.com. All Manuals Search And Download.

Using the TV Buttons on the Remote Control

Basic Connections/Auto Setup

You will need to connect the DVD-VCR to a TV and run Auto

Setup. The Auto Setup will automatically searche for channels and

then set your DVD-VCR's internal clock.

Your VCR remote control will work with Samsung televisions and

compatible brands.

To determine whether your television is compatible, follow the instructions

below.

NOTES:

POWER

OPEN/CLOSE

• See Appendix A for Advanced Connections.

• Standard RF or Line connection between your TV are required to

run DVD+VCR setup menu, even if you connect S-Video

or Component Video Output for a better picture quality.

Switch your television on.

Point the remote control towards the television.

From Antenna or Cable

Hold down the TV button and enter the two-figure code

corresponding to the brand of your television, by pressing the

appropriate numeric buttons.

Connect the RF Antenna Cable to your DVD-VCR

Connect an external indoor/outdoor antenna or wall outlet antenna

cable to the Ant-In jack on the rear panel.

Brand

Codes

Brand

Codes

Connect your DVD-VCR to a TV

Choose one of the following methods:

SAMSUNG

SHARP

SONY

01, 14, 15, 23

02, 16, 22

LOEWE

ZENITH

MAGNAVOX 04

EMERSON

SANYO

DAEWOO

NOBLEX

TELEFUNKEN 26

06, 08, 18

RF Connection

Using the supplied RF antenna cable, connect the OUT jack (TO

TV) on the back panel of your DVD-VCR to your TV’s Antenna

Input.

RCA

07, 29

12, 24

To TV’s Antenna Input

TOSHIBA

PANASONIC

JVC

05, 20

Line Connection

Using an RCA-type audio/video cable (red, white, yellow), connect

the LINE OUT jacks on the back panel of your DVD-VCR to your

TV's Line In jacks. Use the three cables as follows: red for right

audio, white for left audio, and yellow for video.

NOTE: If your TV is equipped with RCA jacks, it is better to use the

Line Connection method.

HITACHI

MITSUBISHI

NEWSAN

Result: If your television is compatible with the remote control, it

will switch off. It is now programmed to operate with the

remote control.

Plug In

Your DVD-VCR's power should be plugged into a standard

120V/60Hz wall outlet. Avoid pressing any buttons on the remote

control or on the unit during an Auto Setup. While your DVD-VCR

is running an Auto Setup, “AUTO” will blink. When Auto Setup is

complet, the current time will be displayed on the front panel. In

case Auto Clock set fails to locate a channel to set the clock, you

should set the clock manually. See page 18.

◆

If several codes are indicated for your television brand, try

each one in turn until you find one that works.

◆

When you change the batteries in the remote control, you

must reprogram the code, following the same procedure.

You can then control the television using the following buttons.

Turn On your DVD-VCR

Turn on the power by pressing the POWER button on the remote

control or on the front panel of the unit.

Button

POWER

INPUT

Function

Turn On your TV

Turn on the TV by pressing the POWER button.

Used to switch the television on and off.

Used to select an external source.

Used to adjust the volume of the television.

Used to select the required channel.

Used to toggle the sound on and off.

◆

POWER

Set the TV to Channel 3, 4 or Line

The same channel you selected in Step 2 above must be used. If

you are using the Line Connection method, set your TV to its Line

Input.

VOL

–

◆

CH ( or

MUTE

)

◆

The various functions will not necessarily work on all

televisions. If you encounter problems, operate the

television directly.

◆

Download from Www.Somanuals.com. All Manuals Search And Download.

Deck Control Buttons

Basic VCR Operation

The DVD-VCR uses one set of controls to operate both decks. The

following buttons are helpful in successfully controlling each deck.

To play a standard VHS videotape, just insert it into the VCR deck

and press the Play button. You can turn on the Auto Play to enable

the VCR deck to play automatically when you insert a videotape

that is missing the Record Safety Tab.. See page 53.

POWER Button

Press the POWER button on the remote control or front panel to

turn on the DVD-VCR.

POWER

OPEN/CLOSE

DVD Button

Insert VHS Tape

Insert a standard VHS videotape into the VCR deck.

Press the DVD button on the remote control or front panel when

you want to control the DVD deck.

•

When a videotape is inserted, power will turn on automatically.

•

The DVD indicator will light on the Front Panel Display to show

that the DVD deck is selected.

Play Tape

Press the ❿ll (PLAY/PAUSE) button on the remote control or on

the front panel of the unit. The videotape will begin to play

automatically if it is missing the Record Safety Tab and Auto Play is

turned on. See page 53

VCR Button

Press the VCR button on the remote control or front panel when

you want to control the VCR deck.

EJECT

•

The VCR indicator will light on the Front Panel Display to show

that the VHS deck is selected.

Stop Playback

DVD/VCR PROGRESSIVE

Press the

panel of the unit.

(STOP) button on the remote control or on the front

INPUT SEL. Button

Press the INPUT SEL. button repeatedly to cycle through all of

your input sources, including the Tuner (Ch##), Line 1 (rear AV

input), and Line 2 (front AV input).

Eject Tape

Press the OPEN/CLOSE button on the remote control or the

EJECT button on the front panel of the unit.

•

Input select is only available when the VCR deck is selected.

Additional VCR Options

•

See pages 52~54 for special VCR Playback features.

See pages 55~57 for VCR Recording features.

See page 58 for Timer Recording features.

Basic DVD Operation

Fllow the instructions below to playback a DVD.

Open the Disc Tray

Press the OPEN/CLOSE button on your remote control or on the

front panel of the unit to turn on the power and open the disc tray.

OPEN/CLOSE

Insert a Disc

EJECT

Put a disc in the center of the tray, with the label-printed side facing

up.

DVD/VCR PROGRESSIVE

Close the Disc Tray

Press the OPEN/CLOSE button on your remote control or on the

front panel of the unit to close the disc tray.

Play a DVD

Press the PLAY/PAUSE button on your remote control or on the

front panel of the unit.

•

Most discs will start to playback as soon as the tray closes.

If a DVD has a MENU, the menu may pop up on TV screen.

Additional DVD Options

•

See pages 25 ~ 35 for advanced DVD Setup options.

See pages 36 ~ 51 for special DVD Playback features.

Download from Www.Somanuals.com. All Manuals Search And Download.

Basic TV Tuner Operations

Menu Language

To change the on-screen MENU language to English, French or

Spanish, follow these steps.

When watching TV using the DVD-VCR's built-in TV tuner, use the

buttons below.

TV/VCR

Press this button to switch between your TV's tuner and the VCR's

internal tuner.

Open “MENU”

Press the MENU button while the DVD is in Stop or Play mode.

•

You don’t need to press the TV/VCR button in vcr mode.

Select “SETUP”

Using the UP/DOWN buttons, move the selection bar to “SETUP”

then press ENTER to select.

Channel Up/Down

Use these buttons to move to the previous or the next channel.

0-9 Buttons

Use these buttons to select the desired channel directly.

Select “Language”

Use the UP/DOWN buttons to highlight “Language” then press the

ENTER button.

Language

English

100+ Button

Press this button to tune to channels 100 and above. First, press

the 100+ button, then use the numeric buttons (0-9) to enter the

remaining digits of the channel number desired.

Front Display

Auto

Off

Auto Power Off

Set menu Language

Place the selection bar next to your desired Language, then press

the ENTER button.

•

This button is activated only in Cable TV Mode.

INFO. Button

Press this button to display the current channel.

•

This also works in DVD and VCR mode.

Language

English

Front Display

Auto

Off

On-Screen Menu Navigation

Auto Power Off

The on-screen menus allow you to enable or disable various

functions on your DVD-VCR. Use the following buttons to open

and navigate through the on-screen menus.

Language

English

Front Display

Auto

Off

MENU Button

Auto Power Off

Press this button while the DVD is in Stop or Play mode to open

the on-screen MAIN MENU.

Up/Down and Left/Right

Use these buttons to move the selection bar up, down, left and

right to cycle through the menu options.

ENTER Button

Press this button to confirm any new settings.

RETURN Button

Language

English

Press this button to return to the last MENU screen displayed or to

exit the on-screen MENU all together.

Front Display

Auto

Off

Auto Power Off

Download from Www.Somanuals.com. All Manuals Search And Download.

Manual Clock Set

Tuner Band Setting

If Auto Setup fails to set the DVD-VCR’s internal clock by locating

a local TV station, follow these steps to set the date and time

manually.

This feature allows you to manually set the DVD-VCR’s tuner

band to Antenna or Cable, whichever you connected to the

Antenna In jack during initial setup.

NOTE: For accurate Timer Recording, your DVD-VCR's internal

clock must be set correctly.

• Use this setting only if Auto Setup detected the incorrect tuner

band, i.e. channels are coming in on the wrong channel numbers.

Open “MENU”

With the DVD in Stop or Play mode, press the MENU button.

Press the MENU button while the DVD is in Stop or Play mode.

Select “SETUP”

Using the UP/DOWN buttons, move the selection bar to “SETUP”

Select “SETUP”

Using the UP/DOWN buttons, move the selection bar to “SETUP”

Language

English

then press ENTER to select.

Language

English

Front Display

Auto

Off

Select “Clock”

Use the UP/DOWN buttons to highlight “Clock ” then press the

ENTER button.

Select “Channel”

Using the UP/DOWN buttons, move the selection bar to “Channel”,

then press ENTER to select.

Auto Power Off

Front Display

Auto

Off

Auto Power Off

Select “Manual Clock”

Move the highlight to “Manual Clock”, then press the ENTER

Select “Ant/Cable”

Move the selection arrow to “Ant/Cable” then press right to select

from the following options:

button.

•

The Clock Set/Adjust menu will change as shown.

Language

English

•

Antenna - Indicates that the DVD-VCR is connected to an indoor

or outdoor VHF/UHF antenna.

Cable TV - Indicates that the DVD-VCR is connected to Cable TV.

Set the Clock

Language

English

Front Display

Auto

Off

Use the Left/Right buttons to select each of the following options,

then use the UP/DOWN buttons to set each option:

Auto Power Off

Front Display

Auto

Off

•

Hour – Set the hour.

Auto Power Off

• Minute – Set the minute.

• Month – Set the month.

• Day

– Set the day.

• Year – Set the year.

Language

English

Confirm Settings

Press the RETURN button to confirm your clock settings and to

Front Display

Auto

Off

Auto Power Off

Language

English

return to the Setup Menu.

•

Press the RETURN button again to exit.

Front Display

Auto

Off

Auto Power Off

Antenna

Cable TV

Ant./Cable

Antenna

3CH

RF Output CH

Auto Channel Memory

Channel Add/Delete

Download from Www.Somanuals.com. All Manuals Search And Download.

RF Output Channel

Auto Channel Memory

Auto Channel Memory will automatically seek and store all active

channels in your area.

Open “MENU”

With the DVD in Stop or Play mode, press the MENU button.

Open “MENU”

With the DVD in Stop or Play mode, press the MENU button.

Select “SETUP”

Using the UP/DOWN buttons, move the selection bar to “SETUP”

then press ENTER to select.

Select “SETUP”

Using the UP/DOWN buttons, move the selection bar to “SETUP”

then press ENTER to select.

Select “Channel”

Using the UP/DOWN buttons, move the selection bar to “Channel,”

then press ENTER to select.

Language

English

Front Display

Auto

Off

Select “Channel”

Using the UP/DOWN buttons, move the selection bar to “Channel”,

then press ENTER to select.

Language

English

Auto Power Off

Select “RF Output CH”

Move the selection bar to “RF Output CH”, then press right

to change.

Front Display

Auto

Off

Auto Power Off

Run “Auto Channel Memory”

Move the selection arrow to “Auto Channel Memory,” then press

ENTER to select.

Change “RF Output CH”

Press Return to change. A message will appear on your TV.

Then press ENTER to change.

Language

English

•

The DVD-VCR will automatically search for all available

channels in the selected Tuner Band. This procedure may take

a few minutes to complete.

Front Display

Auto

Off

Change “TV Channel”

Auto Power Off

When finished, the lowest channel found will be displayed.

Language

English

A message will appear on your TV. When the message disappears,

change your TV to channel 3 or 4 to match the RF output channel

of the player.

Front Display

Auto

Off

Auto Power Off

Language

English

Front Display

Auto

Off

Auto Power Off

Language

English

Front Display

Auto

Off

Auto Power Off

Ant./Cable

Antenna

3CH

RF Output CH

Auto Channel Memory

Channel Add/Delete

Ant./Cable

Antenna

4CH

3CH

4CH

RF Output CH

Auto Channel Memory

Channel Add/Delete

Download from Www.Somanuals.com. All Manuals Search And Download.

Channel Add/Delete

Front Panel Dimmer

You can set the Front Panel Display to be bright all the time, dim

all the time, dim during power off.

Use this feature if Auto Channel Search missed a channel that you

would like to add, or added a channel you wish to remove.

Open “ MENU”

With the DVD in Stop or Play mode, press the MENU button.

Open “MENU”

With the DVD in Stop or Play mode, press the MENU button.

Select “SETUP”

Using the UP/DOWN buttons, move the selection bar to “SETUP”

then press ENTER to select.

Select “SETUP”

Using the UP/DOWN buttons, move the selection bar to “SETUP”

then press ENTER to select.

Set “Front Display”

Language

English

Move the selection bar to “Front Display,” then press right to select

from the following options:

Select “Channel”

Using the UP/DOWN buttons, move the selection bar to “Channel”,

then press ENTER to select.

Language

English

Front Display

Auto

Off

Auto Power Off

•

Auto – Front Panel Display will dim automatically during

power off.

Front Display

Auto

Off

Auto Power Off

•

Bright – Front Panel Display will be bright all the time.

Dim – Front Panel Display will be dim all the time.

Select “Channel Add/Delete”

Move the selection bar to “Channel Add/Delete,” then press

ENTER to select.

Select Channel to add/delete

Language

English

Use the CH

buttons to tune in the channel number you wish

to add or remove.

Front Display

Auto

Off

Language

English

Auto Power Off

Select “Channel Add/Delete”

Front Display

Auto

Off

Press right to add or press left to remove the channel from

your channel list.

Auto Power Off

•

Repeat steps 4 and 5 to add or remove additional channels.

Language

English

Front Display

Auto

Off

Auto Power Off

Language

English

Auto

Bright

Dim

Front Display

Auto

Off

Auto Power Off

Ant./Cable

Antenna

3CH

RF Output CH

Auto Channel Memory

Channel Add/Delete

CHANNEL ADD/DELETE

Select channel : [ 02]

and press

press

[

❿

➛

]

to ADD

to DELETE

ꢀ❷

RETURN

Download from Www.Somanuals.com. All Manuals Search And Download.

Auto Power Off

Disc Menu Language

To set the Disc Menu Language to your preferred language, follow

these steps. If your preferred language is available on a DVD, your

Disc Menu Language will automatically be set to the language you

choose.

Open “MENU”

With the DVD in Stop or Play mode, press the MENU button.

Select “SETUP”

Using the UP/DOWN buttons, move the selection bar to “SETUP”

then press ENTER to select.

Open “MENU”

Press the MENU button while the DVD is in Stop mode.

Select “DVD”

Set “Auto Power Off”

Move the selection bar to “Auto Power Off”, then press right to

select from following options:

Use the UP/DOWN buttons to highlight “DVD”,

then press the ENTER button.

Language

English

•

Off – Auto power off is disabled.

1Hr – DVD-VCR will auto shut off 1 hour after the last button is

Select “Language”

Move the selection bar to “Language” then press ENTER to select.

pressed.

Front Display

Auto

Off

Auto Power Off

Select “Disc Menu”

Highlight “Disc Menu”, then press the ENTER button.

•

2Hr – DVD-VCR will auto shut off 2 hours after the last button is

pressed.

Set “Disc Menu Language” Preference

Highlight your preferred language for disc menus, then press the

ENTER button.

Language

English

Front Display

Auto

Off

Auto Power Off

Audio Language

To set the Audio Language to your preferred language, follow these

steps. If your preferred language is available on a DVD, your Audio

Language will automatically be set to the language you choose.

Language

English

Front Display

Off

1Hr

2Hr

Auto Power Off

Open “MENU”

Press the MENU button while the DVD is in Stop mode.

Select “DVD”

Use the UP/DOWN buttons to highlight “DVD” then press

the ENTER button.

Select “Language”

Move the selection bar to “Language” then press ENTER to select.

Select “Audio”

Highlight “Audio,” then press the ENTER button.

Set “Audio Language” Preference

Highlight your preferred language for audio soundtracks, then

press the ENTER button.

Download from Www.Somanuals.com. All Manuals Search And Download.

Subtitle Language

Digital Output

To set the Subtitle Language to your preferred language, follow

these steps. If your preferred language is available on a DVD, your

Subtitle Language will automatically be set to the language you

choose.

If your A/V receiver is equipped with a Dolby Digital decoder, your

DVD-VCR can output Dolby Digital 5.1 sound, but you MUST

enable this feature in the menu system to prevent damage to your

speakers.

Language

English

Front Display

Auto

Off

NOTE: Select “Bitstream” ONLY if you have connected a Dolby

Digital-equipped A/V receiver to the Digital Output

(optical or coaxial) on the DVD-VCR back panel.

Auto Power Off

Open “MENU”

Press the MENU button while the DVD is in Stop mode.

Select “DVD”

Use the UP/DOWN buttons to highlight “DVD”

then press the ENTER button.

Open “MENU”

Press the MENU button while the DVD is in Stop mode.

Select “Language”

Move the selection bar to “Language” then press ENTER to select.

Select “DVD”

Use the UP/DOWN buttons to highlight “DVD ”

then press the ENTER button.

Select “Subtitle”

Highlight “Subtitle”, then press the ENTER button.

Select “Audio”

Highlight “Audio”, then press the ENTER button.

Set “Subtitle Language” Preference

Highlight your preferred language for subtitles, then press the

ENTER button.

Set “Digital Output”

Highlight “Digital Output” then press the RIGHT button to select

one of the following options:

Subtitle Language

Automatic

•

PCM - To use your DVD/TV with an A/V receiver without a

Dolby Digital decoder.

Subtitle

•

Bitstream – To use your DVD/TV with an A/V receiver with a

Dolby Digital decoder.

PCM

Bitstream

PCM Down Sampling

Download from Www.Somanuals.com. All Manuals Search And Download.

Dynamic Compression

DTS

If your A/V receiver is equipped with a DTS decoder, your DVD-

VCR can output DTS digital sound, but you MUST enable this

feature in the menu system.

Dynamic Compression restrains the dynamic range of sound, i.e.

the difference between the loud and quiet passages of a DVD audio

track.

Language

English

Language

English

NOTE: Select “On” ONLY if you have connected a DTS-equipped

A/V receiver to the DIGITAL AUDIO OUT (optical or coaxial) on

the DVD-VCR back panel.

Front Display

Auto

Off

Front Display

Auto

Off

Open “MENU”

Press the MENU button while the DVD is in Stop mode.

Auto Power Off

Select “DVD”

Use the UP/DOWN buttons to highlight “DVD ”

then press the ENTER button.

Open “MENU”

Press the MENU button while the DVD is in Stop mode.

Select “DVD”

Use the UP/DOWN buttons to highlight “DVD ”

Select “Audio”

Highlight “Audio”, then press the ENTER button.

then press the ENTER button.

Set “Dynamic Compression”

Highlight “Dynamic Compression”, then press the RIGHT button to

select one of the following options:

Select “Audio ”

Highlight “Audio”, then press the ENTER button.

•

On - This will compress the total dynamic range of the DVD

audio, making quiet passages in the audio signal louder and

loud passages softer.

Set “DTS”

Highlight “DTS” then press the RIGHT button to select one

of the following options:

•

Off – This will preserve the original dynamic range.

•

Off - To use your DVD/TV with an A/V receiver NOT equipped

with a DTS decoder.

• On – To use your DVD/TV with an A/V receiver equipped with a

DTS decoder.

Off

PCM Down Sampling

Download from Www.Somanuals.com. All Manuals Search And Download.

PCM Down Sampling

TV Aspect Ratio

If your amplifier is not capable of reproducing a 96kHz signal, PCM

downsampling should be set to on.

Set the aspect ratio (length x width) of your TV screen so the DVD

player will display movies at the appropriate size for your

Language

English

television. Choose from standard, letterbox, or widescreen format.

Language

English

Open “MENU”

Press the MENU button while the DVD is in Stop mode.

Front Display

Auto

Off

Open “MENU”

Press the MENU button while the DVD is in Stop mode.

Front Display

Auto

Off

Auto Power Off

Select “DVD”

Use the UP/DOWN buttons to highlight “DVD ”

then press the ENTER button.

Select “DVD”

Use the UP/DOWN buttons to highlight “DVD ”

then press the ENTER button.

Select “Audio”

Highlight “Audio”, then press the ENTER button.

Select “Display”

Highlight “Display”, then press the ENTER button.

Set “PCM Down Sampling”

Highlight “PCM Down Sampling”, then press the RIGHT button to

select one of the following options:

Set “TV Aspect”

Highlight “TV Aspect” then press the RIGHT button to select one

of the following options:

•

On - When a 96K audio disc is played,

•

Widescreen - This method allows you to view the full 16:9

picture on a widescreen television.

96K will be downsampled to 48K and outputted.

Letterbox - This method displays the full width of the widescreen

movie on a standard 4:3 television. As a result, black bars will

appear at the top and bottom of the screen.

•

Off – When a 96K disc is played, 96K will be outputted.

•

Pan-Scan - The familiar way of watching DVD and VHS movies,

this method selectively crops (by panning and scanning to keep

the most important part of the picture visible) wide screen

movies to fit a standard 4:3 television screen.

Display Setup

Off

PCM Down Sampling

Download from Www.Somanuals.com. All Manuals Search And Download.

Black Level

Alt Video Out

The “Alt Video Out” option must be set in the on-screen menu if

you have connected your DVD-VCR to a TV using the S-VIDEO

OUT or COMPONENT VIDEO OUT jacks.

The Black Level feature adjusts the reference level of black in the

video signal to one of two choices:

• Off - Standard NTSC black level. Yields consistent contrast

through all sources.

Language

English

Language

English

•

Use the S-Video or Component Video connection method only

for the DVD player. The tuner and VCR can still be viewed

through the RF or line outputs.

• On - Enhanced black level, for increased contrast during DVD

playback.

Front Display

Auto

Off

Front Display

Auto

Off

Auto Power Off

Open “MENU”

Press the MENU button while the DVD is in Stop mode.

Open “MENU”

Press the MENU button while the DVD is in Stop mode.

Select “DVD”

Use the UP/DOWN buttons to highlight “DVD ”

Select “DVD”

then press the ENTER button.

Use the UP/DOWN buttons to highlight “DVD,”

then press the ENTER button.

Select “Display”

Highlight “Display”, then press the ENTER button.

Select “Display”

Highlight “Display”, then press the ENTER button.

Set “Black Level”

Highlight “Black Level,” then press the RIGHT button to select one

of the following options:

Set “Alt Video Out”

•

On - This will enhance the Black Level for increased

brightness/contrast when viewing DVDs.

Off - This is the Standard NTSC reference Black Level for

consistent brightness/contrast across all sources.

Highlight “Alt Video Out,” then press the RIGHT button to select

one of the following options:

• S-Video - Select this if you are using the S-Video OUT jack on

the rear panel to connect to a TV.

• Component - Select this if you are using the COMPONENT

VIDEO OUT jacks on the rear panel to connect to a

Progressive(480p) or Interaced (480i) TV.

• See your TV owner’s manual to determine what type of TV you

have.

- Interlace : Interaced Scan mode will work.

- Progressive : Progressive Scan mode will work, and Video

and S-Video will not work.

Press the Progressive button on the front panel if you have a

Progressive scan TV only. Otherwise, the picture will be

disturbed.

•

Display Setup

Off

Download from Www.Somanuals.com. All Manuals Search And Download.

A/V Receiver Connections

Parental

Rating Control is a password protected system that allows you to

block playback of DVDs based on their content. The system uses an

eight level rating system.

• If you try to play a DVD that exceeds the selected rating, an error

message will appear.

To take full advantage of the movie theater experience that DVD

offers, you may want to connect your DVD-VCR to a complete

Surround Sound system, including an A/V Receiver and six

Surround Sound speakers.

• Not all discs are rated.

Before You Begin...

Open “MENU”

Press the MENU button while the DVD is in Stop mode.

•

If your A/V receiver is equipped with a Dolby Digital Decoder,

you have the option to bypass the DVD-VCR’s built-in Dolby

Digital Decoder. Use the DIGITAL AUDIO OUT connection

below.

To Digital Audio Input of an A/V

Receiver with a Dolby Digital

Decoder

Select “DVD”

Use the UP/DOWN buttons to highlight “DVD ”

then press the ENTER button.

Digital Audio Out

Select “Parental”

Highlight “Parental”, then press the ENTER button.

Connect EITHER an optical cable OR a digital coaxial cable from

the DIGITAL AUDIO OUT jacks on the back panel of the DVD-VCR

to their corresponding Digital Audio Input jacks on your A/V

Receiver:

Select “Use Password”

Highlight “Use Password,” then press the RIGHT button to select

one of the following options:

•

Optical

Coaxial

•

Off - No password is necessary to view a DVD or to change the

Rating Level. No additional settings are necessary.

On - A password is necessary to view a DVD and to view the

Rating Level. The menu will change as shown.

Use whichever connection is available on your A/V Receiver.

NOTES:

•

The first time “Require Password” is set to “Yes,” you will be

prompted to enter a new password.

If the “Enter Password” screen appears, then “Require

Password” has already been set to “Yes.” Please skip to Step 5.

There no Default Password.

Enter Password

Use the numeric buttons (0-9) on the remote control to enter the

4-digit password.

•

Write your password down, and keep it in a safe place in case

you need it to change your settings later.

Select “Rating Level”

Move the selection bar to “Rating Level,” then press ENTER to

select.

Change Rating Level

Use the UP/DOWN buttons to select one of the following ratings:

•

Level 8 Adult

Level 7

Level 6

•

Level 4

Level 3

Level 2

Level 1 Kids Safe

Level 5

All ratings above the level you select will also be blocked, e.g., if

you block Level 6, then Levels 7 and 8 will also be blocked.

Press ENTER to confirm your selection.

• If you forgot your password, press power on from a cold start

with no disc in the unit. Press the REW and F.F buttons

simultaneously on the front panel for 5 seconds. The “reset ok”

message will appear. Press the POWER button and the

DVD-VCR will go to the “Auto Setup” mode. (See page 13)

Download from Www.Somanuals.com. All Manuals Search And Download.

Special Playback Features

During DVD/CD playback you can select from the following

special playback options. To resume normal playback, press the ❿ll

(Play/Pause) button.

Still

Press the ❿ll (PLAY/PAUSE) button on the remote control during

playback.

• The picture will pause and the audio will mute.

• To resume playback, press the ❿ll (PLAY/PAUSE) button.

• If the player is left in Pause mode for 5 minutes, it will stop

automatically.

Frame Advance (Step)

While in Still mode, press the F.ADV/SKIP button on the remote

control to advance one frame at a time.

• Audio is muted during Frame Advance mode.

• Press ❿ll (PLAY/PAUSE) to resume normal playback.

NOTE: Frame Advance operates only in the forward direction.

Skip Forward/Back

While a CD or DVD disc is in Play mode, press the SKIP

FORWARD/BACK (❿❿

➛➛ ) buttons on the remote control or front

panel to jump forward and backward through disc chapters/tracks.

•

Skip Forward will jump to the next chapter/track.

Skip Back will jump to the beginning of the current chapter/track.

• Press Skip Back again to jump to the beginning of the previous

chapter/track.

Search Forward/Back

While a disc is in Play mode, press and hold the FORWARD/BACK

(

❿❿ /➛➛ ) buttons on the remote control or front panel to visually

search forward/backward at 2X - 4X - 8X - 16X - 32X - 128X speed.

Press ❿ll (PLAY/PAUSE) button to resume normal speed.

NOTE: CD search speed - 2X, 4X, 8X

Slow Motion

During playback, press the ❿ll (PLAY/PAUSE) button to Still the

image. Press and hold the Search FORWARD (❿❿ ) to play in slow

motion at variable speeds.

•

Press and hold the FORWARD button (❿❿✌ꢁ on the remote and

front panel to increase or decrease the speed from normal

playback to 1/8, 1/4 or 1/2 speed.

•

Audio is muted during slow motion playback.

Press the ❿ll (PLAY/PAUSE) button to resume normal

playback.

NOTE: Slow function is not available for CD.

Stop/Resume

• Press the Stop button once to stop playback. To resume the

DVD/CD from the point where the disc stopped, press the ❿ll

(PLAY/PAUSE) button.

• Press the

(STOP) button twice to completely stop playback.

The next time you press ❿ll (PLAY/PAUSE), the disc will start

over from the beginning.

Download from Www.Somanuals.com. All Manuals Search And Download.

Disc Menu Navigation

Many DVDs feature their own menu systems, where you can select

Titles, Chapters, Audio Tracks, Subtitles, and special disc features,

such as movie trailers, and information on the cast. Use these

buttons to make selections in the Disc menus.

DISC MENU

Press to access the DVD’s Disc menu, if applicable.

Press

ꢀ,

❷

➛

❿

to navigate through DVD’s Disc menu

options.

• Press up, down, left and right to highlight menu choices.

ENTER Button

Press to make your selections in the Disc menu.

EZ View

Press the EZ VIEW button.

• The screen size changes when the button is pressed repeatedly.

• The screen zoom mode operates differently depending on the

screen setting in the initial setup menu.

• To ensure correct operation of the EZ VIEW button, you should

set the correct aspect ratio in the initial setup .(See the page 31)

If you are using a 16:9 TV

- For 16:9 aspect ratio discs

• Wide Screen

Displays the content of the DVD title in 16:9 aspect ratio.

• Screen Fit

The top and bottom of the screen are cut off. When playing a

2.35:1 aspect ratio disc, the black bars at the top and bottom

of the screen will disappear. The picture will look vertically

stretched. (Depending on the type of disc, the black bars may

not disappear completely.)

• Zoom Fit

The top, bottom, left and right of the screen are cut off and

the central portion of the screen is enlarged.

Download from Www.Somanuals.com. All Manuals Search And Download.

EZ View

Title/Chapter/Time Selection

To view the current Title, Chapter/Track, and counter position,

press the INFO. button during DVD playback. The Information

screen can also be used to quickly choose a title, chapter/track, or

playing time.

- For 4:3 aspect ratio discs

• Normal Wide

Displays the content of the DVD title in 16:9 aspect ratio.

The picture will look horizontally stretched.

• Screen Fit

View the Display

The top and bottom of the screen are cut off and the full screen appears. The picture will

look vertically stretched.

During DVD/CD playback, press the INFO. button on the

remote control.

• Zoom Fit

Select title

The top, bottom, left and right of the screen are cut off and the central portion of the screen

is enlarged.

Use the UP/DOWN and LEFT/RIGHT buttons to select Title, then

press the ENTER button to change among all available titles on the

disc.

• Vertical Fit

When a 4:3 DVD is viewed on a 16:9 TV, black bars will appear at the left and right of the

screen in order to prevent the picture from looking horizontally stretched.

Select Chapter or Track

Use the UP/DOWN and LEFT/RIGHT buttons to select Chapter or

Track, then press the ENTER button to change among all

available Chapters/Tracks on the disc.

If you are using a 4:3 TV

- For 16:9 aspect ratio discs

Select Counter Position

•

4:3 Letter Box

Use the UP/DOWN and LEFT/RIGHT buttons to select the counter

position indicator, then use the numeric buttons (0-9) to enter the

desired counter position in the format H:MM:SS (H = Hours, M =

Minutes, S = Seconds).

Then press the ENTER button to enter the desired counter

position.

Displays the content of the DVD title in 16:9 aspect ratio.

The black bars will appear at the top and bottom of the screen.

•

4:3 Pan Scan

The left and right of the screen are cut off and displays the central portion of the 16:9 screen.

Screen Fit

The top and bottom of the screen are cut off and the full screen appears. The picture will look

vertically stretched.

➢

To make the screen disappear, press the INFO button again.

•

Zoom Fit

When a 4:3 DVD is viewed on a 16:9 TV, black bars will appear at the left and right of the

screen in order to prevent the picture from looking horizontally stretched.

To access the desired title when there is more than one in

the disc. For example, if there is more than one movie on a

DVD, each movie will be identified.

- For 4:3 aspect ratio discs

Title

•

Normal Screen

Displays the content of the DVD title in 4:3 aspect ratio.

Most DVD discs are recorded in chapters so that you can

quickly find a specific passage.

Chapter

Time

•

Screen Fit

The top and bottom of the screen are cut off and the full screen appears. The picture would

look vertically stretched.

Allows playback of the film from a desired time.

You must enter the starting time as a reference.

•

Zoom Fit

Refers to the language of the film soundtrack. In the

example, the soundtrack is played in English 5.1CH. A DVD

disc can have up to eight different soundtracks.

The top, bottom, left and right of the screen are cut off and the central portion of the screen is

enlarged.

Audio

Refers to the subtitle languages available in the disc.

You will be able to choose the subtitles language or, if you

prefer, turn them off from the screen. A DVD disc can have

up to 32 different subtitles.

Subtitle

3D Sound

➢

This function may behave differently depending on the type of disc.

A surround sound effect is generated using only two front

speakers.

Download from Www.Somanuals.com. All Manuals Search And Download.

Subtitle

Angle View

Some DVD Movies provide you with various camera

angle views on the same scene while they are playing.

To activate the feature press the ANGLE Button.

Some DVDs provide subtitles in one or more languages. You can

use the SUBTITLE button to quickly view and change settings.

Open Subtitle Menu

During playback, press the SUBTITLE button.

Check for the Angle Icon

Press the Angle button, you’ll see the Angle Icon when watching a

DVD with multi Angles available.

Set Subtitle Language

Use the LEFT/RIGHT buttons to select from the available subtitle

languages.

View Angle Menu Options

When the Angle Icon comes up on the screen press the ANGLE

button to see the Angle menu.

•

Subtitle languages are represented by abbreviations.

ENG

Activate Subtitles

Use the UP/DOWN buttons to turn On or Off subtitles.

Select an Angle option

Press the UP/DOWN buttons to select a camera angle you wish to

see.

•

The default is "On".

Press the ENTER button to confirm your selection.

ENG

Off

Download from Www.Somanuals.com. All Manuals Search And Download.

A to B Repeat

Repeat Chapter/Title

A to B Repeat feature enables you to repeat the designated section

on a DVD or CD. To activate, mark where to start(A) and where to

end(B) of the section you want to watch.

You can repeat a single chapter or a complete title.

Open Repeat Menu

Press the REPEAT button while in Play mode to open the Repeat

menu.

Select A-B Repeat Function

Press the REPEAT button while in Play mode, then use the

Left/Right buttons to select A-B Repeat.

•

The current Repeat mode will be highlighted.

•

When you select A-B Repeat, “A-” will be highlighted.

Select “Chapter”

DVD

NOTE: The menu will display “Track” in place of “Chapter” if you

Use the LEFT/RIGHT buttons to select “Chapter”.

are playing a CD.

Chapter Title A - B

Off

•

When you select Chapter Repeat, “Chapter” will be highlighted.

DVD

Mark the Starting Point

Press the ENTER button at the beginning of the segment you want

to repeat (Point A).

Repeat Chapter

Chapter Title A - B

Off

Press the ENTER button to repeat the current chapter or track.

•

Once you select Point “A”, “B” will be highlighted.

Select “Title”

NOTE: The minimum A-B Repeat time is 5 seconds.

Use the LEFT/RIGHT buttons to select “Title”.

•

When you select Title Repeat, “Title” will be highlighted.

Mark the Ending Point

Repeat Title

Track Disc A - B

Press the ENTER button again at the end of the segment you want

to repeat (Point B).

Off

Press the ENTER button to repeat the title.

•

The segment will begin repeating in a continuous loop.

Track Disc A - B

Off

Cancel A-B Repeat

Press the REPEAT button to open the Repeat Menu, use the

Left/Right buttons to highlight “Off,” then press the ENTER button.

Audio

DVD

Multiple language/audio setup options, such as Dolby Digital 5.1,

Dolby Pro Logic, or LPCM 2 Channel audio, are available on some

DVDs. You can use the AUDIO button to quickly view and select

the options available on a disc.

ENG DOLBY DIGITAL 5.1CH

Open the Audio Menu

During playback, press the AUDIO button on the remote control.

Select DVD Audio Track

Use the LEFT/RIGHT buttons to select the desired language/audio

setup on the DVD.

Stereo

• Languages are represented by abbreviations, e.g. “ENG” for

“English.”

Download from Www.Somanuals.com. All Manuals Search And Download.

MP3/WMA Play

Bookmarks

When an MP3/WMA Disc is inserted into the DVD player, the first song file of

the first folder plays.

Up to three Bookmarks can be inserted for a given DVD, allowing

you to quickly jump to your favorite scene or song.

•

If more than two file extensions are present, select the media of your

choice.

Open Bookmark Menu

During playback, press the MARK button on the remote control.

The “MARK” header will be displayed on the screen.

To change the currently playing media, press the STOP (

twice and then press the MENU button.

) button

➢

If no button on the remote controller is pressed for 60 seconds, the menu

will disappear and the selected item will be played.

Select Bookmark Placeholder

Use the LEFT/RIGHT buttons to move to one of the three bookmark

placeholders (- - -).

MP3/WMA Play Function

•

The selected placeholder will be highlighted.

When the first song file is playing, the music folder menu will

appear on the right side of the screen.

Up to 8 music folders can be displayed at a time. If you have more

than 8 folders on a disc, press the LEFT/RIGHT buttons to bring

them up on the screen.

– –

Set the Bookmark

Keep on playing the DVD up to the scene you want to bookmark,

then press the ENTER button. The placeholder (-) will change to a

number (1, 2 or 3).

•

Use the UP/DOWN buttons to select the desired music folder, then

press ENTER. Use the UP/DOWN buttons again to select a song

file. Press ENTER to begin playback of the song file.

You may continue to set up to three bookmarks.

Press the MARK button when complete.

Depending on the disc, the bookmark function may not work.

RETURN

Program/Random playback

Play Bookmark

CLEAR

– –

• During playback, press the MARK button on the remote control.

• Use the LEFT/RIGHT buttons to move to a previously set

bookmark.

PROGRAM

RANDOM

With the MP3 in Stop mode, press the MODE button to switch

between the RANDOM and PROGRAM modes. See page 47 for

more information on these modes.

•

Press the PLAY/PAUSE button to play the bookmark.

Press the CLEAR button to cancel the bookmark.

Press the MARK button again to exit the Bookmark menu.

➢

•

Press the REPEAT button to hear only music continuously and

press it once again to release.

RETURN

• PROGRAM/RANDOM playback cannot be used if the disc

contains more than two types of file extensions.

Download from Www.Somanuals.com. All Manuals Search And Download.

MP3/WMA Play

Program Play & Random Play

CD-R MP3/WMA discs

Program Play (CD/MP3/WMA)

PROGRAM

RANDOM

When playing CD-R/MP3 or WMA discs, please follow all the recommendations for CD-R above,

plus the comments below:

With the MP3 in Stop mode, press the MODE button.

• Your MP3 or WMA files should be ISO 9660 or JOLIET format.

ISO 9660 format and Joliet MP3 or WMA files are compatible with Microsoft's DOS and Windows,

and with Apple's Mac. These two formats are the most widely used.

Use the LEFT/RIGHT buttons to select PROGRAM.

Press the ENTER button.

RETURN

• When naming your MP3 or WMA files do not exceed 8 characters, and place ".mp3, .wma"

as the file extension.

Use the LEFT/ RIGHT/ UP/ DOWN buttons to select the first track

to add to the program.

Press the ENTER button. The selection numbers appear in the

Program Order box.

General name format of: Title.mp3. or Title.wma. When composing your title, make sure that you

use 8 characters or less, have no spaces in the name, and avoid the use of special characters

including: (.,/,\,=,+).

PROGRRAM 01

Track

Program order

- - - - - - - -

01 02 03 04

05 06 07 08

09 10 11 12

13 14 15 16

• Use a decompression transfer rate of at least 128 Kbps when recording MP3 files.

Sound quality with MP3 files basically depends on the rate of compression/decompression you

choose. Getting audio CD quality sound requires an analog/digital sampling rate, that is

conversion to MP3 format, of at least 128 Kbps and up to 160 Kbps. However, choosing higher

rates, like 192 Kbps or more, only rarely give better sound quality.

Press the PLAY/PAUSE (❿ꢁll) button.

The disc will be played in programmed order

RETURN

CLEAR

Conversely, files with decompression rates below 128 Kbps will not be played properly.

• Use a decompression transfer rate of at least 64Kbps when recording WMA files.

Sound quality with WMA files basically depends on the rate of compression/decompression you

choose. Getting audio CD quality sound requires an analog/digital sampling rate, that is

conversion to WMA format, of at least 64Kbps and up to 192Kbps.

Conversely, files with decompression rates below 64Kbps or over 192Kbps will not be played

properly.

PROGRAM

RANDOM

Random Play (CD/MP3/WMA)

• Do not try recording copyright protected MP3 files.

Certain "securized" files are encrypted and code protected to prevent illegal copying. These files

are of the following types: Windows Media^TM(registered trade mark of Microsoft Inc) and SDMI^TM

(registered trade mark of The SDMI Foundation). You cannot copy such files.

With the MP3 in Stop mode, press the MODE button.

Use the LEFT/ RIGHT buttons to select RANDOM.

Press the ENTER button.

The disc will be played in random order.

• Important: The above recommendations cannot be taken as a guarantee that the DVD player will

play MP3 recordings, or as an assurance of sound quality.

You should note that certain technologies and methods for MP3 file recording on CD-Rs prevent

optimal playback of these files on your DVD player (degraded sound quality and in some cases,

inability of the player to read the files).

RETURN

• This unit can play a maximum of 500 files and 300 folders per disc.

➢

• Depending on the disc, the Program and Random Play

functions may not work.

• To resume normal play, press the CLEAR button.

• PROGRAM/RANDOM playback cannot be used if the disc

contains more than two types of file extensions.

• This unit can support a maximum of 99 programmed order.

Download from Www.Somanuals.com. All Manuals Search And Download.

Picture CD Playback

•

Select JPEG in the menu to view a Photo CD.

To change the currently playing media, press the STOP ( ) button

➢

twice and then press the DISC MENU button.

CD-R JPEG Discs

•

If no button on the remote controller is pressed for 60 seconds, the

menu will disappear and the selected item will be played.

• Only files with the ".jpg" and ".JPG" extensions can be played.

• If the disc is not closed, it will take longer to start playing and not all of the recorded files may be played.

• Only CD-R discs with JPEG files in ISO 9660 or Joliet format can be played.

• The name of the JPEG file may not be longer than 8 characters and should contain no blank spaces or

special characters (. / = +).

• Only a consecutively written multisession disc can be played. If there is a blank segment in the

multisession disc, the disc can be played only up to the blank segment.

• A maximum of 500 images can be stored on a single CD.

Open the disc tray.

Load the disc on the tray.

- Load the disc with the labeled side up.

Close the tray.

- The tray closes and you should get a screen that looks like the

one below.

• Only Kodak Picture CDs can be played.

• When playing a Kodak Picture CD, only the JPEG files in the pictures folder can be played.

• Picture discs other than Kodak Picture CD may take longer to start playing or may not play at all.

• If a number of files in 1 Disc is over 500, only 500 JPEG file can be played.

• If a number of folders in 1 Disc is over 300, only JPEG files in 300 folders can be played.

ALBUM

PHOTO: 1 /215

• Use the Up/Down or Left/Right buttons on the remote controller to select

the picture you want to view and then press the ENTER button. (Press

the PLAY/PAUSE ( ❿ꢁll ) button if you want to play it in the Slide Show

mode.)

ꢀ

• To see the next 6 pictures, press the

button.

• To see the previous 6 pictures, press the

ꢀ

button.

•

: Return to the Album Screen.

PHOTO: 1 /215

: Each time the ENTER button is pressed, the picture rotates 90

degrees clockwise.

RETURN

•

: Each time the ENTER button is pressed, the picture is enlarged

up to 4X. (Normal ➢ 2X ➢ 4X ➢ 2X ➢ Normal)

•

: The unit enters slide show mode.

*Press the RETURN button to return to the album screen.

*Before the Slide Show can begin, the picture interval must be set.

•

: When this icon is selected and ENTER is pressed, the pictures

change automatically with about an 6 second interval.

RETURN

TIMER:

: The pictures change automatically with about an 12 second

interval.

: The pictures change automatically with about an

18 second interval.

*Depending on the file size, each interval between images may take

longer or shorter than the manual suggests

➢

• Press the RETURN button to return to the album screen.

• Press the RETURN button to return to the slide show.

• If no buttons on the remote controller pressed for 10 seconds, the menu will disappear.

Press the Up/Down or Left/Right buttons on the remote controller to display the menu again.

Download from Www.Somanuals.com. All Manuals Search And Download.

3D Sound

Function (DVD)

The 3D Sound function is a sound enhancement mode that lets you

enjoy virtual surround sound with only two speakers.

Use this feature to check your DVD.

Language

English

Open “MENU”

With the DVD in Stop or Play mode, press the MENU button.

Press the “INFO.” button

Front Display

Auto

Off

During playback, press the “INFO.” button on the remote control.

Auto Power Off

Select “FUNCTION”

Use the UP/DOWN buttons to highlight “FUNCTION” then press

the ENTER button.

Set 3D Sound

Use the UP/DOWN buttons to select “3D Sound” item.

Select “DVD Function”

Using the UP/DOWN buttons to highlight “DVD Function” then

press ENTER to select.

Use the LEFT/RIGHT buttons to confirm your selection.

-ON : A surround sound effect is generated using only two front

speakers.

-Off : This function will not work.

Select “Title Menu”

Highlight “Title Menu”, then press the ENTER button.

- Disc Menu

To make the screen disappear, press the “INFO.” button again.

Highlight “ Disc Menu”, then press the ENTER button.

- Information

Highlight “Information”, then press the ENTER button.

- Zoom

Highlight “Zoom”, then press the ENTER button.

- Bookmark

Highlight “Bookmark”, then press the ENTER button.

- Repeat

Highlight “Repeat”, then press the ENTER button.

- EZ View

DVD Function

Title Menu

Disc Menu

Information

Zoom

Bookmark

Repeat

Highlight “EZ View”, then press the ENTER button.

EZ View

Download from Www.Somanuals.com. All Manuals Search And Download.

Special VCR Playback Features

Auto Play

While a videotape is playing, you can enjoy a variety of special

playback features, including Still, Frame Advance, Skip, Repeat, and

more. Press the Play button again to resume normal playback.

If you want your videotapes to play automatically when you insert

them, turn on Auto Play.

NOTE: Only tapes that are missing the Record Safety Tab will

play automatically when inserted.

PLAY

Still

From Play mode, press Play/Pause to still a single frame.

Open the “MENU”

With the DVD in Stop or Play mode, press the MENU button.

Frame Advance

From still mode, press F.ADV/SKIP to advance to the next frame.

0:00:00 SP

Select “VCR”

Using the Up/Down buttons, move the selection bar to

“VCR” then press ENTER to select.

Press the INFO. button to see the

current status of the VCR deck, as well

as the tape counter position and

record speed.

T120

T160

T180

Cue/Review

From Play mode, press F.Forward (❿❿) or Rewind (➛➛) to

cue/review at two speeds:

•

Picture Search — Press and release to advance the tape

forward or backward at 5 times normal speed.

Jet Search — Press and hold to advance the tape forward or

backward at 7 times normal speed.

Select “Tape Length”

Press the RIGHT button to select the video cassette length.

This information is usually printed on the tape box. The menu

cycles through: T120, T160 or T180. Once the type of cassette is

set, the VCR can display the amount of time remaining on the tape

when you press the INFO. button.

•

Skip

From Play mode, press F.ADV/SKIP to cue ahead exactly 30

seconds. Press Skip repeatedly up to 4 times to cue ahead 2

minutes.

Select “Auto Play”

Move the selection bar to “Auto Play,” then press right to select

from the following options:

Off

Repeat

•

On - The VCR will automatically begin playing a video tape

when it is inserted, as long as the safety tab of the cassette has

been removed.

•

From Play mode, press Repeat to review the last 5 seconds of

tape (SP mode).

•

From Play mode, press Repeat to review the last 15 seconds of

tape (SLP mode).

•

Off - Auto play is disabled.

Select “Auto Repeat”

Shuttle

Move the selection bar to “ Auto Repeat” sets the VCR to

play a tape repeatedly [unless a tape control is activated (stop, fast

forward or rewind)].

From Play mode, Shuttle >> gradually increases the cue speed

from Double-Speed playback to Picture Search to Jet Search.

Shuttle << gradually slows down the tape, then goes into Slow

mode, Still mode, Reverse Picture Search and Reverse Jet Search.

Off

Tracking

The Tracking adjustment removes the white lines that sometimes

appear during playback because of slight differences in recording

decks. The TRK button will automatically align the recorded tracks

with the playback heads to solve this problem. You may also set

tracking manually.

S-VHS Playback

The DVD-VCR allows you to playback high quality S-VHS tapes.

Insert a S-VHS Tape

Adjust Tracking Manually

During playback, press the CH/TRK

remove white lines from the picture.

Insert an S-VHS tape into the VCR deck.

or CH/TRK

buttons to

Start Playback

Press Play/Pause on the remote control to begin playback of the S-VHS tape.

Download from Www.Somanuals.com. All Manuals Search And Download.

Basic Recording

Variable Search System

Press the SEARCH button to display the search screen in the stop

mode. When a program is recorded, the starting point is given an

Index mark for easy location. However, the VHS Index Search

System (VISS) cannot recognize index marks made by old VCRs. If

the VCR has trouble finding a mark, it is probably because the

cassette was recorded on a VCR without VISS. If you want to index

two programs in a row, set your VCR to stop, then start recording

each program. Pause has no effect on index marks.

You can record a TV show in progress by inserting a blank tape and

pressing the REC button. You can even add time in 30-minute

increments up to 4 hours by pressing the REC button repeatedly;

see page 57.

Forward

Reverse

NOTE: Be sure your videotape has a Record Safety Tab. If the tab

is missing, you can cover the opening with a small piece of

tape. Warning: Do not cover this opening unless you are

sure you want to record over the tape.

Go to 0:00:00 stop

Before You Begin...

Use this feature when you want to search for the 0:00:00 counter

position on a cassette. Press the CLEAR button at the point on the

tape where you want to set the counter to 0:00:00. While a

cassette is stopped, press the up arrow button. The VCR will

rewind or fast forward, searching for the 0:00:00 counter position,

and then automatically stop at that position.

•

Power on the DVD-VCR

Power on the TV

• Set the TV to channel 3 or 4 .

Insert Tape

Insert a blank VHS tape into the VCR deck.

• Make sure the tape is long enough to record the entire program.

To change the Recording Speed, see page 57.

End search

Use this feature when you want to search for a blank position to

record a program on a cassette. While a cassette is stopped, press

ENTER button. The VCR will fast forward, searching for a blank

position, and then automatically stop at that position. If the VCR

reaches the end of the tape during end search, the tape will be

ejected.

Select a Channel to Record

Use the 0–9 buttons or the Channel Up/Down arrow buttons to

select the desired channel, or press the INPUT SEL. button to

select Line 1 or 2 if recording from an external device connected to

the front or rear Line inputs, respectively.

Scan and play

Use scan and play when you don’t know exactly where a program

is located on a cassette tape.

Start Recording

Press the REC button on the remote control or front panel.

For options while recording is in progress, see “Special Recording

Features” on the next page.

- Forward Intro Scan

Highlight “Forward Intro Scan”, then press the ENTER button.

- Reverse Intro Scan

➢

Recording from the DVD player to the VCR is not

possible.

Highlight “Reverse Intro Scan”, then press the ENTER button.

DVD/VCR PROGRESSIVE

Download from Www.Somanuals.com. All Manuals Search And Download.

Special Recording Features

One-Touch Recording (OTR)

While a recording is in progress, you can watch a different channel,

watch a DVD, or add recording time in 30-minute increments.

One-Touch Recording (OTR) allows you to add recording time in

30-minute increments up to 4 hours at the touch of a button.

RECORD

Pause/Resume Recording

Press the ❿ll (PLAY/PAUSE) button.

Press REC again to resume.

Start Recording

Follow the instructions on page 55 to begin recording.

Activate OTR

While in Record mode, press the REC button again to activate

One-Touch Recording (OTR).

Stop Recording

Press the STOP button two times.

Watch a Different Channel

Press the TV/VCR button on the remote to switch to your TV tuner,

then select a different channel on your television.

• Record length 0:30 appears on the On-Screen Display and the

DVD-VCR will record for exactly 30 minutes.

0:30

1:00

1:30

2:00

3:00

4:00

Add Recording Time

Record length 0:30 07

To Watch a DVD

Insert a DVD in the DVD deck and press Play. The output will

automatically change to the DVD.

Continue pressing REC to add recording time in 30 minute

increments up to 4 hours.

• The DVD-VCR stops recording automatically when the time has

elapsed. And DVD-VCR will be Automatically turned off when

the OTR finished.

Add Recording Time

See One-Touch Recording (OTR) on the next page.

Record Speed

You can slow down the recording speed from SP to SLP in order to fit

six hours of programming on a T-120 tape.

Start Recording

Follow the Basic Recording instructions on page 55.

Set Record Speed

Press the SPEED button on the remote control to set the Record

Speed to one of the following options:

•

SP – Standard Play, for best quality.

• SLP – Super Long Play, for maximum recording time (3 times SP).

NOTE: The selected Record Speed will appear on the front panel

display and on-screen display.

Maximum Recording Time - SP vs. SLP

Tape Length

T-120

SP (Standard Play)

2 hrs

SLP (Super Long Play)

6 hrs

8 hrs

9 hrs

T-160

2hrs 40 mins

3 hrs

T-180

Download from Www.Somanuals.com. All Manuals Search And Download.

Function (VCR)

How to Set a Timer Recording

Insert a blank videotape into the VCR deck. Be sure to leave the

Record Safety Tab intact.

Open “MENU”

With the DVD in Stop or Play mode, press the MENU button.

With the Timer Recording function, you can program up to 7

events at a time to record up to a month in advance.

Set the TV to channel 3 or 4.

Language

English

Language

English

Front Display

Auto

Off

Front Display

Auto

Off

Select “FUNCTION”

Use the Up/Down buttons to highlight “FUNCTION” then press the

ENTER button.

Auto Power Off

To Begin Setting the Timer Recording,

•

Turn on your DVD-VCR, and

Turn on your TV.

Select “VCR Function”

Using the UP/DOWN buttons to highlight “VCR Function” then

press ENTER to select.

Open “MENU”

Press the MENU button or the TIMER button while the DVD is in

Stop or Play mode.

Timer Program

Select “Go to ( 0: 00: 00)”

Highlight “Go to (0:00:00)”, then press the ENTER button.

If you want to set

the timer program,

Select “Program”

Use the UP/DOWN buttons to highlight “PROGRAM”

then press the ENTER button.

press the ENTER key

- End Search

Highlight “End Search”, then press the ENTER button.

- Forward Intro Scan

Highlight “Forward Intro Scan”, then press the ENTER button.

- Reverse Intro Scan

Select Channel Number

Use the Right and UP/DOWN buttons to set the channel.

Press the RIGHT button to move to the next setting.

Highlight “Reverse Intro Scan”, then press the ENTER button.

Set “Time/Date/Speed”

Start

End

Date

Speed

Repeat Step 3 above to set start time, end time, date and record

speed. Date can be set for one time, daily or weekly recording.

See below.

Forward

Reverse

Save “Timer Recording”

Press the RETURN button to finish setting the timer recording.

Stop the VCR or turn the power off. The timer indicator light will

come on the VCR. Then the VCR will automatically turn on and

begin recording at the time you set. To stop the timer recording,

press the POWER button or press the STOP button two times.

Auto Speed Select

If the length of the videotape is not long enough for a timer

recording in the SP mode, set the recording tape speed to “AUTO”.

Recording will start in the SP mode. If the length is not long

enough, the tape speed will automatically change from SP mode to

SLP mode.

Daily/Weekly Date Programming

Weekly [SUN’S~SAT’S]: Use this to record TV programs on the

same channel at the same time every week.

Daily [MO - FR] : Use this to record TV programs on the same

channel at the same time every day Monday through Friday.

Download from Www.Somanuals.com. All Manuals Search And Download.

Stereo Connections

S-Video/Component Video Connections (for DVD)

You can connect your DVD-VCR to your home stereo system or

stereo TV and enjoy stereo sound when watching a movie or TV.

Use the S-Video or Component Video connection method only for

the DVD player. The tuner and VCR can still be viewed through the

RF or line inputs.

To activate your alternative (S-Video or Component) video

selection, follow the “Alt Video Out” instructions on page 33.

Keep in mind that you can choose either S-Video or Component

only, but not both.

A superior video quality can be obtained when watching a DVD on

your DVD-VCR if your TV is equipped with S-Video or Component

Video inputs.

Connect DVD-VCR to Stereo

Using RCA cables, connect the Line Out Left and Right Audio jacks

on the back panel of the DVD-VCR to the Auxiliary Inputs on your

stereo receiver. Connect the Video Output also in case you are

using a stereo TV.

To S-Video Input on Your TV

Set Stereo to Auxiliary Mode

Connect S-VIDEO OUT to TV

Set your stereo receiver or TV to either “Aux” or “Tape” regardless

of which line input you are using for your particular device.

Using an S-Video cable, connect the S-VIDEO OUT on the back

panel of your DVD-VCR to the S-Video Input on your TV.

Play a Tape

Connect Component Video Out to TV

Insert a DVD or Hi-Fi stereo videotape into your system. Be sure to

adjust the volume on your stereo receiver or TV. Audio will be heard

through your stereo speakers.

To Component Video Input

on Your TV

Using a component video cable, connect the COMPONENT

VIDEO OUT (Y, Pb, Pr) on the back panel of your DVD-VCR to the

Component Video Input on your TV.

•

If there is no stereo sound even after you have inserted a Hi-Fi

stereo videotape, press the Audio button until “Hi-Fi” appears

on the on-screen display.

Connect Audio Out (DVD only)

Using RCA audio cables, connect the Left/Right Line Out jacks on

the back panel of your DVD/VCR to the Left/Right Audio Line In

jacks on your TV.

To Left/Right Audio Inputs

on Your TV

•

When connecting your DVD-VCR to a TV with the S-Video or

Component Video Output, make sure that you use these Line

Out jacks.

• To activate your connection, see “Alt Video Out” on page 33.

Download from Www.Somanuals.com. All Manuals Search And Download.

Monitor TV Connections

Connecting Other Video Equipment

Monitor-style televisions offer improved sound and picture over

regular televisions because they receive the audio and video signals

directly from the DVD-VCR through the line inputs.

You can connect a wide variety of audio/video equipment to your

DVD-VCR, including:

•

An additional VCR

Laser Disc Player

DVD Player

Camcorder

Satellite Receiver

Video Game

NOTE: A monitor television is not the same as a computer

monitor.

Connect VCR to Monitor TV

Since all of these devices use essentially the same connections, they

will be described together.

To Monitor TV Audio/Video Inputs

Connect RCA cables from the Audio/Video Line Out jacks on the

back panel of the DVD-VCR to the Audio/Video Line Inputs of your

monitor TV.

TV Audio/Video Outputs of

External Device

Connect Device to DVD-VCR

Connect RCA cables from the Audio and Video Line Outputs of

your external device to the Audio and Video Line Inputs on the

front or back panel of the DVD-VCR.

Set TV to Auxiliary Mode

Set your monitor TV to “Aux,” “Video,” or “Line.” Refer to your

monitor television owner’s manual for the correct setting.

Watch Device

Connection is Complete

NOTE: With this connection, the TV/VCR button has no effect. It is

as if the TV/VCR button were always set to VCR.

Play your external device, then press the INPUT SEL. button until

the playback from LINE1 (rear panel inputs) or LINE2 (front panel

inputs) appears on your TV screen.

2,3

Record Device

First, play your external device. Next, press the INPUT SEL. button

until the playback from LINE1 (rear panel inputs) or LINE2 (front

panel inputs) appears on your TV screen. Then press Record on

the VCR deck.

Timer Record From Device

Select LINE1 (L1) or LINE2 (L2) as your record source in the Timer

Record menu. All other Timer Record settings should be set in the

usual manner.

Download from Www.Somanuals.com. All Manuals Search And Download.

Technical Specifications

SAMSUNG COMBINATION DVD & VCR

LIMITED WARRANTY TO ORIGINAL PURCHASER

This SAMSUNG brand product, as supplied and distributed by Samsung Electronics America, Inc. (SAMSUNG) and delivered

new, in the original carton to the original consumer purchaser, is warranted by SAMSUNG against manufacturing defects in

materials and workmanship for a limited warranty period of:

AUDIO

2 Stereo audio inputs, RCA Connector, -8dbm, 47KΩ,

front and rear

One (1) Year Parts and Labor*

(*90 Days Parts and Labor for Commercial Use)

Inputs

VIDEO

2 Composite video inputs, RCA Connector, 75Ω, 1Vp-p

Antenna or CATV Input, F-Connector, 75Ω

This limited warranty begins on the original date of purchase, and is valid only on products purchased and used in the United

States. To receive warranty service, the purchaser must contact SAMSUNG for problem determination and service procedures.

Warranty service can only be performed by a SAMSUNG authorized service center. The original dated bill of sale must be

presented upon request as proof of purchase to SAMSUNG or SAMSUNG’s authorized service center. Transportation of the

product to and from the service center is the responsibility of the purchaser.

AUDIO

1 Stereo audio outputs, RCA Connector, -8dbm, 1.5KΩ

AUDIO (DVD only)

2 Digital audio outputs (1 optical, 1 coaxial)

1 Stereo audio outputs

VIDEO

1 Composite video output, RCA Connector, 75Ω, 1Vp-p

SAMSUNG will repair or replace this product, at our option and at no charge as stipulated herein, with new or reconditioned

parts or products if found to be defective during the limited warranty period specified above. All replaced parts and products

become the property of SAMSUNG and must be returned to SAMSUNG. Replacement parts and products assume the

remaining original warranty, or ninety (90) days, whichever is longer.

Outputs

VIDEO (DVD only)

1 S-Video output, S-Connector, 75Ω, Y=1.0Vp-p,

C=0.286Vp-p

1 Component video output, 75Ω, Y=1.0Vp-p, Pb=0.7Vp-p,

Pr=0.7Vp-p

SAMSUNG ís obligations with respect to software products distributed by SAMSUNG under the SAMSUNG brand name are

set forth in the applicable end user license agreement. Non-SAMSUNG hardware and software products, if provided, are on

an ”AS IS” basis. Non-SAMSUNG manufacturers, suppliers, publishers, and service providers may provide their own

warranties.

Channel 3 or 4

VIDEO SYSTEM

1/2-inch VHS system, 4 rotary head helical scanning;

FM azimuth luminance;chrominance: converted sub system

phase shift

This limited warranty covers manufacturing defects in materials and workmanship encountered in normal, and except to the

extent otherwise expressly provided for in this statement, noncommercial use of this product, and shall not apply to the

following, including, but not limited to: damage which occurs in shipment; delivery and installation; applications and uses for

which this product was not intended; altered product or serial numbers; cosmetic damage or exterior finish; accidents, abuse,

neglect, fire, water, lightning or other acts of nature; use of products, equipment, systems, utilities, services, parts, supplies,

accessories, applications, installations, repairs, external wiring or connectors not supplied and authorized by SAMSUNG, or

which damage this product or result in service problems; incorrect electrical line voltage, fluctuations and surges; customer

adjustments and failure to follow operating instructions, cleaning, maintenance and environmental instructions that are covered

and prescribed in the instruction book; product removal or reinstallation; reception problems and distortion related to noise,

echo, interference or other signal transmission and delivery problems. SAMSUNG does not warrant uninterrupted or error-free

operation of the product.

AUDIO TRACK

Normal: 1 track; Hi-Fi: 2 track

PLAY/RECORD TIME

FF/REW TIME

HEADS

T-180 tape: SP 3 hours, SLP 9 hours

T-120 tape: <2 minutes

VCR

Video: DA 4 rotary

Audio: 2 rotary heads (Hi-Fi); 1 stationary head (Linear)

Control:1 stationary head

Erase: 1 full track, 1 audio track

Less than 0.005% (Hi-Fi)

WOW & FLUTTER

FREQ. RESPONSE

DISC COMPATIBILITY

THERE ARE NO EXPRESS WARRANTIES OTHER THAN THOSE LISTED AND DESCRIBED ABOVE, AND NO WARRANTIES

WHETHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF MERCHANTABILITY

OR FITNESS FOR A PARTICULAR PURPOSE, SHALL APPLY AFTER THE EXPRESS WARRANTY PERIODS STATED ABOVE,

AND NO OTHER EXPRESS WARRANTY OR GUARANTY GIVEN BY ANY PERSON, FIRM OR CORPORATION WITH

RESPECT TO THIS PRODUCT SHALL BE BINDING ON SAMSUNG. SAMSUNG SHALL NOT BE LIABLE FOR LOSS OF

REVENUE OR PROFITS, FAILURE TO REALIZE SAVINGS OR OTHER BENEFITS, OR ANY OTHER SPECIAL, INCIDENTAL OR

CONSEQUENTIAL DAMAGES CAUSED BY THE USE, MISUSE OR INABILITY TO USE THIS PRODUCT, REGARDLESS OF THE

LEGAL THEORY ON WHICH THE CLAIM IS BASED, AND EVEN IF SAMSUNG HAS BEEN ADVISED OF THE POSSIBILITY OF

SUCH DAMAGES. NOR SHALL RECOVERY OF ANY KIND AGAINST SAMSUNG BE GREATER IN AMOUNT THAN THE

PURCHASE PRICE OF THE PRODUCT SOLD BY SAMSUNG AND CAUSING THE ALLEGED DAMAGE. WITHOUT LIMITING

THE FOREGOING, PURCHASER ASSUMES ALL RISK AND LIABILITY FOR LOSS, DAMAGE OR INJURY TO PURCHASER

AND PURCHASERíS PROPERTY AND TO OTHERS AND THEIR PROPERTY ARISING OUT OF THE USE, MISUSE OR INABILITY

TO USE THIS PRODUCT SOLD BY SAMSUNG NOT CAUSED DIRECTLY BY THE NEGLIGENCE OF SAMSUNG. THIS LIMITED

WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN THE ORIGINAL PURCHASER OF THIS PRODUCT, IS

NONTRANSFERABLE AND STATES YOUR EXCLUSIVE REMEDY.

20-20,000 Hz (Hi-Fi)

CD, CD-R, CD-R/W

DVD-Video, CD-Digital Audio (5” and 3.5”),

MP3 files on CD-ROM

DVD

FREQ. RESPONSE

S/N RATIO

96/48 kHz Sampling: 4 Hz-22kHz

110 dB

DYNAMIC RANGE

THD

96 dB

0.003 %

POWER REQUIREMENT

ENVIRONMENT

WEIGHT

120V AC, 60 Hz, 25 watts

41-104 F (5-40 C); 10%-75% humidity

13.8 lbs.

SYSTEM

Some states do not allow limitations on how long an implied warranty lasts, or the exclusion or limitation of incidental or

consequential damages, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal

rights, and you may also have other rights which vary from state to state.

To obtain warranty hardware service, please contact SAMSUNG at:

SAMSUNG CUSTOMER CARE CENTER

400 Valley Road, Suite 201, Mt. Arlington, NJ 07856, Tel: 973-601-6000, Fax: 973-601-6001

1-800-SAMSUNG (1-800-726-7864) and www.SAMSUNGUSA.com

Download from Www.Somanuals.com. All Manuals Search And Download.

SAMSUNG ELECTRONICS AMERICA, INC.

HEADQUARTERS

105 Challenger Road, Ridgefield Park, N.J.

07660-0511

TEL: 1-800-SAMSUNG

SERVICE DIVISION

400 Valley Road, Suite 201, Mount Arlington, NJ 07856

1-800-SAMSUNG (1-800-726-7864)

www.SAMSUNGUSA.com

ELECTRONICS

AK68-00135A

Download from Www.Somanuals.com. All Manuals Search And Download.

QSC Audio Stereo Amplifier TD 000271 01 User Guide
Rackmount Solutions TV Mount CV 1602 User Guide
Radica Games Games 73025 User Guide
Radica Games Games 77004 User Guide
Realistic Marine Radio HTX 100 User Guide
Remington Electric Shaver MicroFlex 600 User Guide
Royal Sovereign Paper Shredder AFS 800 User Guide
Russell Hobbs Microwave Oven RHM2016 User Guide
Sangean Electronics MP3 Player HDR 1 User Guide
Sanyo Projector PLC SU50S User Guide