Samsung IP Phone SMT i5243 User Guide

Download from Www.Somanuals.com. All Manuals Search And Download.  
SAFETY CONCERNS  
The purpose of the Safety Concerns section is to ensure the safety of users and  
prevent property damage. Please read this document carefully for proper use.  
Conventions  
Warning  
Provides information or instructions that you should follow in order to avoid  
personal injury or fatality.  
Caution  
Provides information or instructions that you should follow in order to avoid a  
service failure or damage to your phone.  
Note  
Indicates additional information for referrence.  
Checks  
Provides the operator with checkpoints for stable system operation.  
Symbols  
Caution  
Indication of a general caution  
Restriction  
Indication for prohibiting an action for a product  
Instruction  
Indication for commanding a specifically required action  
SMT-i5243 User Guide _1  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Warning  
WARNING  
Doing so may cause a fire or electric shock.  
Power  
Do not use a damaged power plug,  
cord, or a loose outlet.  
For the power connection port of  
the phone, use the provided  
optional power adapter. Use of a  
power adapter that does not meet  
the specifications may cause the  
product to become damaged, to  
overheat, or to explode.  
Do not pull the product by the  
cord, bend the cord with force, and  
do not touch the power plug with  
wet hands.  
If there is dirt or moisture on the  
pin contact surface of a power  
plug, pull out the plug and wipe it  
away with a cloth. If dirt or  
moisture remains on the product  
even after wiping, contact the  
service center.  
When the phone is out of use for a  
long time, leave the plug pulled out  
of the outlet.  
If an abnormal sound, smell or  
smoke is emitted from the phone,  
pull out the power plug  
immediately, and then contact the  
service center.  
Installation/Maintenance  
Do not place the phone in a  
Do not place vases, flowerpots,  
cups, or a container of cosmetics  
or drugs near the phone.  
location with a lot of dust, in a  
location that is subject to severe  
changes in temperature, or near a  
heating device (cigarette heat,  
heater, etc.)  
Do not use or store flammable  
spray or materials near the phone.  
2_ © SAMSUNG Electronics Co., Ltd.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Caution  
Doing so may cause the damage to the product and  
the product to be out of order.  
CAUTION  
Power  
Do not power off the phone while upgrading a program.  
General  
The LAN cable to the network  
should be connected to the LAN  
port of a phone, NOT to the PC  
connection port.  
Use a soft and dry cloth when  
cleaning the phone.  
Do not spray water directly onto  
the product; and do not use  
chemicals such as wax, benzene,  
alcohol, thinner, mosquito killer,  
perfume spray, lubricant,  
detergent, etc.  
Do not place a heavy object on top  
of the phone.  
Do not disassemble, repair or  
modify the phone without a reason  
for doing so.  
Do not install the phone under  
direct sunlight.  
This product does not have the  
function to support a USB port.  
Do not connect an optional USB  
device to the USB port.  
SMT-i5243 User Guide _3  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TABLE OF CONTENTS  
SAFETY CONCERNS  
1
Conventions ...........................................................................1  
Symbols..................................................................................1  
Warning...................................................................................2  
Caution....................................................................................3  
PREPARATIONS  
8
Check Package Items ...........................................................8  
Phone Installation ..................................................................9  
Connection to Back Ports.............................................................9  
Assembling the Cradle ................................................................10  
Assembling the Wall-Mount Bracket ..........................................11  
Detachment from the Wall-Mount Bracket.................................12  
BEFORE USE  
13  
Key Functions ..................................................................... 13  
Parts and Names ................................................................ 15  
Front Configuration......................................................................15  
Names and Functions .................................................................16  
Phone Information Display................................................. 19  
Phone Status Indicator................................................................19  
LED Indicator ...............................................................................19  
Phone Status Icons .....................................................................20  
4_ © SAMSUNG Electronics Co., Ltd.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Call Status Information................................................................20  
Text Input Method............................................................... 21  
BASIC FUNCTIONS  
22  
Dialing .................................................................................. 22  
Dialing an Extension Number......................................................22  
Dialing a Station Line Number ....................................................23  
Dialing via Speaker Phone ..........................................................24  
Quick Search Function................................................................25  
Dialing the Last Call Number.......................................................26  
Receiving a Call................................................................... 27  
Receiving a Call via the Handset ................................................27  
Receiving a Call via Speaker Phone...........................................28  
Call Pickup...................................................................................29  
Functions Available during Call......................................... 30  
Call Hold.......................................................................................30  
Call Back......................................................................................31  
MUTE ...........................................................................................32  
Call Transfer .................................................................................33  
Conference Function...................................................................34  
Details of Counterpart .................................................................35  
Call Recording .............................................................................36  
Volume Control.................................................................... 37  
Volume Control of a Handset......................................................37  
Volume Control of a Speaker ......................................................38  
Volume Control of Ringing Sound...............................................39  
MAIN MENUS  
40  
Menu Structure ................................................................... 40  
Call Menus........................................................................... 42  
SMT-i5243 User Guide _5  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Phonebook...................................................................................42  
Call Log ........................................................................................48  
Message.......................................................................................49  
Conference...................................................................................53  
Directory service ..........................................................................54  
UC Menu.............................................................................. 55  
Connecting to Presence Server..................................................56  
Buddy Setting..............................................................................58  
Buddy List....................................................................................60  
VOD..............................................................................................64  
Scheduler.....................................................................................65  
XML Browser ...............................................................................66  
Phone Menu........................................................................ 68  
Screen ..........................................................................................68  
Sound...........................................................................................70  
Language .....................................................................................71  
Security ........................................................................................71  
Phone Information .......................................................................71  
Settings Menu..................................................................... 72  
Application Settings.....................................................................72  
Absent Message..........................................................................74  
Call Forward.................................................................................75  
Network Information....................................................................76  
User Data Initialization.................................................................76  
SOFT AND AOM MENUS  
77  
Soft Menu ............................................................................ 77  
Using Soft Menu..........................................................................77  
AOM (Add On Module) ....................................................... 78  
Use of AOM .................................................................................78  
6_ © SAMSUNG Electronics Co., Ltd.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TROUBLESHOOTING  
ANNEX  
79  
81  
Product Specifications....................................................... 81  
REQUIRED PUBLIC STATEMENT FOR GPL/LGPL  
LICENSED SOFTWARE USED IN THIS PRODUCT........ 82  
SMT-i5243 User Guide _7  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PREPARATIONS  
Check Package Items  
Check that all the components below are contained in the product package box.  
Phone Body  
Wall-Mount  
Bracket(Option)  
Handset  
Phone Cradle  
LAN Cable  
Quick Guide  
User Manual CD  
Ferrite Core  
- If any components are damaged or missing, contact the dealer.  
- The power adapter is optional. If needing the power adaper, contact the dealer.  
8_ © SAMSUNG Electronics Co., Ltd.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Phone Installation  
Connection to Back Ports  
If a headset is used, connect it to the headset port.  
1
Connect a handset to the handset port.  
2
Connect one end of the PC connection LAN cable, which was provided  
with the phone, to the PC connection port of the phone. Connect the  
3
other end to the PC network port.  
Connect the LAN cable connected to the network to the LAN  
connection port of the phone.  
4
- If power is supplied from the LAN port (PoE), the phone is booted up when the LAN  
is connected.  
If PoE is not supported, connect the power adapter to the power  
connection port. When the plug of the connected power adapter is  
5
plugged into the outlet, the phone is booted up. (The power adapter is  
purchased separately.)  
SMT-i5243 User Guide _9  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Assembling the Cradle  
The installation angle of a phone can be changed depending on the assembly  
direction of the cradle.  
Fix one latch of the cradle to the top or bottom groove of the phone.  
1
Push the remaining latch into the remaining groove on the opposite side.  
2
Place the phone on the installation location and check whether it shakes.  
3
10_ © SAMSUNG Electronics Co., Ltd.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Assembling the Wall-Mount Bracket  
Assemble the wall-mount bracket where you want to use the phone.  
The wall-mount bracket is an optional item. If necessary, please contact your dealer.  
First, choose the location where you want to install the phone, and then  
determine the positions of the screws by placing the phone at the target  
1
location on the wall.  
Remove the desk cradle of the phone.  
2
Insert the wall-mount bracket as shown  
in the figure.  
3
Pull off the handset rack, and then insert  
it in the opposite direction, as shown in  
4
the figure.  
- Only the up-down direction changes. The front-  
back remains unchanged.  
Install the phone onto the wall.  
5
SMT-i5243 User Guide _11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Detachment from the Wall-Mount Bracket  
This section describes how to detach the phone from the wall-mount bracket.  
You can detach the phone from the  
bracket by pressing the [Push] section  
1
at the bottom of the bracket.  
- Detach the phone more easily by pulling the  
entire bottom of the bracket instead of only the  
[Push] section.  
Pull out the handset rack, change the  
direction, and then insert it again.  
2
12_ © SAMSUNG Electronics Co., Ltd.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BEFORE USE  
Key Functions  
Network  
The SMT-i5243 phone enables voice telecommunication through an  
already-installed data network, without requiring the installation of a  
separate telephone line. Therefore, it does not require the additional  
expense of maintaining telephone numbers, and can save on  
telephone costs for the businesses, and people, that use  
international phone calls frequently.  
Network  
Screen  
The SMT-i5243 phone displays various functions on an LCD screen.  
The functions can be operated conveniently using the navigation  
button and the [OK] button, or the selection buttons on the right and  
bottom side of the screen.  
AOM Function  
UC Service  
The frequently used functions and phone numbers can be  
programmed into the AOM (Add On Module) buttons. Then, these  
functions can be used by just pressing the shortcut buttons  
and also calls can be made by pressing.  
Buddy registration, status view/setting, etc. can be performed  
through interworking with the presence server. Various functions  
such as VOD view and play can also be used through interworking  
with the VCS (Video Contents Server).  
Auto Redial  
When the called party is busy, the caller can make another call  
immediately, as soon as the called party is ready, by using the call-  
back and waiting function.  
SMT-i5243 User Guide _13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Call Hold  
When carrying out a complex job, or if another call is received while  
making a call, that call can be put on ‘hold’ temporarily or transferred  
to another person by using the call hold or call forward function.  
Conference  
Call Forward  
If the [Conference] button is used during a conference, up to 5  
people including the original caller can participate in the call.  
A call can be forwarded to another number when the call cannot be  
received.  
Do Not Disturb  
Call Pickup  
If this function is selected, the phone does not ring even when a call  
is placed to the phone.  
Using the user’s own phone, this function allows a call to be picked  
up when made to another phone.  
14_ © SAMSUNG Electronics Co., Ltd.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Parts and Names  
Front Configuration  
SMT-i5243 User Guide _15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Names and Functions  
Button  
Function  
Phone Status Indicator  
A red LED showing the phone’s status (busy, ringing,  
receiving an internal message, etc.).  
Bottom and right-side Used by the user to select their desired function from the  
,
Selection buttons  
Conference button  
Transfer button  
menus displayed on the LCD screen.  
Used to make a conference call.  
Used to transfer a current call, or enter a function to a  
button on the AOM screen.  
Hold button  
UC dial  
Used to hold a call temporary without hanging up.  
Sets the phone to a call forward or a ‘do not disturb’ status.  
Used to manipulate the menu functions.  
Navigation button  
AOM button  
Used to allocate system functions or phone numbers to  
each button, to allow the buttons to function as hotkeys.  
Dial button  
Used to enter numbers and characters.  
Speaker button  
Headset button  
Volume button  
Used to converse via a speaker phone instead of a handset.  
Used to converse via a headset.  
Used to control the volume of the handset, speaker, key  
tone, etc.  
- Waiting status: Pressing the button adjusts the volume of  
the key tone.  
- When a handset is picked up: Pressing the button adjusts  
the volume of a handset.  
- When a speaker button is pressed: Pressing the button  
adjusts the volume of a speaker.  
Mute button  
Silences the voice of the user to the called party.  
Displays the UC menus.  
UC Service button  
Message button  
Displays more detailed menus where the user can create a  
message or select a message box, etc.  
Phonebook button  
Displays a phonebook so that a user can search or enter a  
phone number via a soft menu.  
16_ © SAMSUNG Electronics Co., Ltd.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Button  
Function  
LCD screen  
The configuration of LCD screen is as follows:  
- On the top of the screen, the icons representing phone function  
settings are displayed.  
- On the main screen, selectable menus, the call processing status,  
or various messages are displayed.  
- At the bottom of the screen, menus that the user can select  
depending on status are displayed.  
Status display  
Main screen  
Menu display  
Handset  
Transfers the caller’s voice.  
SMT-i5243 User Guide _17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Navigation Button and UC Dial  
The SMT-i5243 phone has navigation buttons and UC dial to allow users to use its  
functions easily.  
UC dial  
Navigation button  
Direction key  
OK button  
Button  
Function  
UC dial  
Left  
The user can set the phone to the unconditional call forward  
state. If a buddy server is connected, this is set to a busy  
status.  
Center  
Right  
The default standby status.  
This is set to ‘Do Not Disturb’ and in buddy rejection status.  
Navigation Direction key  
Used to edit the contents on the screen or move between  
menu items.  
OK  
- Used to select or save the item where a cursor is placed in a  
menu mode.  
- Used to check the caller information received from a station  
line during receiving.  
What is UC?  
UC (Unified Communication) describes the infrastructure environment used to  
support the integrated communication. Its key functions include IP telephony,  
voice/video conference via a server, presence service, VOD service, XML  
browser, etc.  
18_ © SAMSUNG Electronics Co., Ltd.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Phone Information Display  
Phone Status Indicator  
The phone status indicators are turned on or off depending on their usage status.  
Situation  
Indicator State  
Red colored indicator is constant.  
Red colored indicator flashes.  
When busy  
When an extension rings  
When a station line rings  
When a message is left  
LED Indicator  
[Hold] button, [Speaker] button, [Headset] button, [Mute] button and [AOM]  
button have an LED which is turned on or off according to their status.  
Button LED  
Hold  
LED Status  
Description  
Red colored indicator turns on  
Red colored indicator turns on  
Red colored indicator turns on  
Red colored indicator turns on  
Red colored indicator flashes  
when an incoming call is held.  
when a speaker phone is used.  
when all voice sending is blocked.  
when a call is made via a headset.  
Speaker  
Mute  
Headset  
AOM  
when a user is receiving an incoming  
call.  
Red colored indicator turns on  
when a line is busy (or AOM is a  
phone number), or the relevant  
function is active.  
SMT-i5243 User Guide _19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Phone Status Icons  
They show the phone setting status, being displayed on the left top side.  
Button  
Description  
Server connection status  
Headset connection status  
Missed calls  
Internal messages  
Locked  
Call Forward  
Do Not Disturb  
Recording during calling  
Connection to PC program during calling  
Message  
Call Status Information  
Describes the different animation images displayed according to call status.  
Animation image  
Description  
Dial input/system function is being conducted.  
A call is being made  
Busy status  
A secret call is being made  
A call is being received  
Call end (displayed when a call ends and the phone is in an off-  
hook status)  
Call recording  
20_ © SAMSUNG Electronics Co., Ltd.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Text Input Method  
Using the dial buttons and navigation buttons on the phone, the user can easily  
enter or modify the Korean, English, numbers, and special characters.  
Whenever the user presses the dial button [ ] on a text input screen,  
the input mode is changed in sequence. The input mode is displayed as  
an icon in the status area of the top-right corner of the LCD.  
*
1
Example of a text input screen  
: Korean input mode  
: Alphabet input mode-uppercase  
: Alphabet input mode-lowercase  
: Number input  
Korean characters, the English alphabet and numbers can be input using  
the dial buttons.  
2
- Inputting special characters: Press the [#] button to select the special character  
input mode, and select characters using the navigation button to input or modify  
them.  
Dial Button  
Navigation Button  
SMT-i5243 User Guide _21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BASIC FUNCTIONS  
Dialing  
Function used to place a call using an extension or station line number.  
The product is set to its general phone mode which allows the user to make a  
call directly through dialing. If the phone is changed to its mobile phone mode,  
a call can be made by pressing the phone number and then pressing the [Send]  
button. This description is based on a mobile phone mode.  
Dialing an Extension Number  
Function used to dial an extension number.  
Pick up the handset, check whether the dial  
tone is audible, and then press the extension  
1
number.  
If the user selects the [Call] button at the  
bottom, a ring back tone can be heard.  
2
If the party receives the call, begin the  
conversation.  
3
22_ © SAMSUNG Electronics Co., Ltd.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
An extension line is the telephone line through which a call can be placed to  
another internal phone connected to the system of the office.  
A station line is the telephone line where the user can make or receive a call  
to/from outside (e.g. home), which is directly connected to the switching system  
of a central office.  
Dialing a Station Line Number  
Function used to dial a station line number.  
Pick up the handset, and check whether the  
dial tone is audible.  
1
Press the line group directory number [9]  
button, and then press an external phone  
2
number.  
If the user selects the [Call] button at the  
bottom, a ring back tone can be heard.  
3
If the party receives the call, begin the  
conversation.  
4
As the line group directory number may vary per system, contact the system  
operator.  
SMT-i5243 User Guide _23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Dialing via Speaker Phone  
Function used to make a call via a speaker phone, instead of a handset.  
Press the [Speaker] button without picking up  
a handset.  
1
Press a phone number, select [Call] at the  
screen bottom, and then a ring back tone will  
2
be heard.  
When the party receives the call, begin the  
conversation.  
3
- If the handset is picked during a call, the speaker is  
turned off, and the conversation can be continued  
through the handset.  
When a call ends, press the [Speaker] button  
again.  
4
- If a handset is being used, hang up.  
24_ © SAMSUNG Electronics Co., Ltd.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quick Search Function  
Function used to search for a phone number saved in a phonebook or call log,  
allowing the user to place a call. This is available only when in mobile phone mode.  
If there are multiple phone numbers that contain the same number sequence,  
the search results are displayed for each item.  
On the dial input screen, enter the phone  
number to call. When the number of digits  
1
entered exceeds 3 or more, the search result is  
displayed at the bottom.  
- The search results are displayed in the order of  
phonebook, home buddy and call log.  
Using a navigation button, the user can select a  
number to call, save it in the phonebook,  
2
or check the information.  
SMT-i5243 User Guide _25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Dialing the Last Call Number  
Function used to make a call to the last extension or station line number.  
Selecting the [CallLog] at the bottom of a  
standby screen displays the last call records.  
1
Using a navigation button, move to a desired  
number and select [Call] to make a call.  
2
26_ © SAMSUNG Electronics Co., Ltd.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Receiving a Call  
Function used to receive a call from an extension or station line.  
Receiving a Call via the Handset  
The phone can be answered via a handset.  
Pick up a handset when a phone rings.  
1
Converse with the party.  
2
Hang up the handset when the call ends.  
3
SMT-i5243 User Guide _27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Receiving a Call via Speaker Phone  
Function used to receive a call via a speaker phone, instead of a handset.  
When the phone rings, press the [Speaker]  
button.  
1
Converse with the party.  
- If the handset is picked up during a call, the speaker  
2
is turned off, and the conversation can be continued  
via the handset.  
When a call ends, press the [Speaker] button  
again.  
3
When an incoming call only causes a received message to display on a screen,  
without the tone ringing, the phone can be answered by picking up a handset.  
28_ © SAMSUNG Electronics Co., Ltd.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Call Pickup  
Function used to receive a call placed to another extension phone allocated within  
the same group.  
The extension phone allocated to the same  
group is ringing.  
1
Select [DIR.PICK UP] from the soft menu.  
2
Enter the extension phone number to pick up.  
- Make a selection using a navigation button, or press  
the selection button on the right side of the soft menu  
screen.  
Converse with the party when connected.  
3
Call pickup is allowed only to the subscribers allocated to the same group.  
To allocate groups, contact the system administrator.  
SMT-i5243 User Guide _29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Functions Available during Call  
The functions below are convenient to use while making a call via an extension or  
station line.  
Call Hold  
A call can be held temporarily, making the caller wait, and then the conversation can  
be continued when convenient.  
To hold the current call, press the [Hold] button  
during call.  
1
The message ‘HOLD’ is displayed.  
2
Put down the handset.  
The call can be resumed by pressing the  
3
[CALL 1] button.  
30_ © SAMSUNG Electronics Co., Ltd.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Call Back  
This function can be used to make a call to a specific party later in the event of a call  
being made via an extension line when the called party is busy.  
When the called party is busy,  
select [CAMP ON] from the soft menu.  
1
If the message ‘0000: BUSY. Camp’ is  
displayed, put down the handset.  
2
- When the handset has been put down, it returns to  
the initial screen.  
When the called party completes the previous  
call, the caller’s phone rings; and if the handset  
3
is picked up, a call is then made to the called  
party.  
SMT-i5243 User Guide _31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MUTE  
This function is used to silence the user’s voice during a call via an extension line,  
but the user can still hear the voice of the other party.  
During a call, select [MUTE] from the soft  
menu.  
1
Now the other party cannot hear the user’s  
voice.  
To disable the MUTE function, select the  
[mute (Off)] from the soft menu.  
2
Alternately, pressing the [Mute] button to the left of the dial button provides the  
same function.  
32_ © SAMSUNG Electronics Co., Ltd.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Call Transfer  
A current call can be transferred to another extension or station line’s subscriber.  
To transfer a call, press the [Transfer] button.  
1
After hearing a dial tone, press the phone  
number of another subscriber to connect.  
2
- If the target number is a station line number, press the  
line group directory number (e.g. [9]) and then dial a  
phone number; or if it is an extension number, only  
dial the extension number.  
When a ring back tone is heard from the other  
subscriber, put down the handset.  
3
- Alternately, wait until the called party receives the call,  
and then hang up the phone after telling him/her  
about it.  
The following events may occur when a call is transferred to another subscriber  
(counterpart):  
- When the receiving caller is busy or does not receive the call: Press the [Transfer]  
button again to go back to the conversation with the original caller.  
- When the receiving caller does not answer the phone after call transfer is  
completed: A call is dialed back to the caller who originally transferred it.  
- When the receiving caller’s line is busy: It is possible to resume conversation with  
the original caller, or make give the call a waiting status to wait for the receiver to  
finish their call.  
SMT-i5243 User Guide _33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Conference Function  
During a call, other subscribers of extension line can be invited to participate in a  
conference call.  
During a call, press the [Conference] button, or  
select the [CONFERENCE] from the soft menu.  
1
- When the system does not support a conference call,  
even if the soft button is pressed, a conference call is  
not created.  
After getting a dial tone, dial the phone  
numbers of the other conference participants.  
2
When a call is connected, press the  
[Conference] button or select [CONFERENCE]  
3
from the soft menu to start the conversation.  
- During the conference call, a participant can be  
added in the same way.  
To support the conference call service, the terminal’s number should be  
registered with the system. If this function does not work properly, contact the  
system administrator.  
34_ © SAMSUNG Electronics Co., Ltd.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Details of Counterpart  
This is the function-during inbound or outbound calls-that receives the details and  
information on the counterpart from the system, and displays it on a screen.  
When information on the counterpart is  
received, the [PremiumCID] menu is activated.  
1
- If the counterpart is already registered in the  
phonebook, the information contained in it is  
displayed; if not, the information received from the  
system is displayed on the screen.  
Select the [PremiumCID] to check the  
information.  
2
SMT-i5243 User Guide _35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Call Recording  
If a terminal is working with the OfficeServ Communicator, it is possible to record the  
conversation using the recording function of the OfficeServ Communicator.  
During a call, select [VoiceRec] at the bottom  
of a screen, to start recording.  
1
- If the call is being made while working with the active  
OfficeServ Communicator, the [Record] menu at the  
bottom is activated.  
Selecting [StopVoRec] terminates the  
recording.  
2
- The user can check the recording file via the  
recording check function of the OfficeServ  
Communicator.  
36_ © SAMSUNG Electronics Co., Ltd.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Volume Control  
The user can adjust the volume of a handset, speaker and tone sound.  
Volume Control of a Handset  
The user can adjust the volume in the following  
way while making a call via a handset.  
1
To increase the volume, press the upper part (+)  
of the [Vol] button.  
2
To decrease the volume, press the lower part (-)  
of the [Vol] button.  
3
SMT-i5243 User Guide _37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Volume Control of a Speaker  
The user can adjust the volume of a speaker in  
the following way while calling.  
1
To increase the speaker volume, press the  
upper part (+) of the [Vol] button.  
2
To decrease the speaker volume, press the  
lower part (-) of the [Vol] button.  
3
38_ © SAMSUNG Electronics Co., Ltd.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Volume Control of Ringing Sound  
To increase the volume of the ringing sound,  
press the upper part (+) of the [Vol] button while  
1
the bell is ringing.  
To decrease the volume of the ringing sound,  
press the lower part (-) of the [Vol] button while  
2
the bell is ringing.  
By pressing the [Vol] button in standby mode, the user can also adjust the key  
tone volume.  
SMT-i5243 User Guide _39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MAIN MENUS  
This section describes menu functions. The phone includes Call, UC, Phone and  
Settings menus.  
Menu Structure  
Clicking the [Menu] button when a phone is in standby mode displays menus on a  
screen. The desired menu can be selected by using the navigation button or the  
selection button on the right side or at the bottom of a screen.  
Button  
Sub-menus  
Function  
Call  
1. Phonebook  
Provides the function to save, search and register  
with the phonebook.  
2. Call Log  
3. Message  
Shows all information on inbound/outbound calls  
and missed calls.  
Enables the creation/saving and sending/receiving  
of a message.  
4. Conference  
Supports a conference call.  
5. Directory service  
This allows a user to search through the users  
registered with the LDAP (Lightweight Directory  
Access Protocol) server. (For specific server  
information, contact the administrator.)  
40_ © SAMSUNG Electronics Co., Ltd.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Button  
Sub-menus  
Function  
UC  
1. Buddy Setting  
The status of a user who logged into the presence  
server can be changed.  
2. Buddy List  
3. VOD  
The user can view the buddy list registered by a  
user, or add the data.  
The user can view and play the VOD list of the VCS  
(Video Contents Server).  
4. Scheduler  
The user can register and manage his schedule.  
5. XML Browser  
The user can search and use the information  
provided from the XML browser server.  
Phone  
1. Screen  
2. Sound  
The idle screen decoration, LCD power and screen  
saver can be set, and LCD brightness can be  
adjusted.  
The type of ringing sound, key tone and message  
tone can be selected, and their volumes can be  
adjusted.  
3. Language  
The user can set the language displayed on a  
screen.  
4. Security  
The user can change the password, and lock the  
phone, so that other people cannot use their phone.  
5. Phone Information  
1. Application Settings  
2. Absent Message  
3. Call Forward  
This displays the phone model and software version  
information.  
Settings  
The user can set the optional functions related to  
calls and messages.  
The user can set the message to be displayed to the  
called party when he is absent.  
The user can set the number used for call  
forwarding when he cannot receive a call.  
4. Network Information  
This displays the network settings of the phone.  
5. User Data  
Initialization  
This clears all the information settings saved in a  
phone and resets them to their initial status.  
SMT-i5243 User Guide _41  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Call Menus  
Settings can be changed for the phonebook, call log, call forward and absent  
message.  
Phonebook  
Using the phonebook, the user can easily manage  
phone numbers, email ID, fax numbers, photos, etc.  
In addition, calls can easily be made using the  
phonebook.  
By selecting [Menu] Æ [1. Phonebook] or by  
pressing the [Phonebook] button, the user can  
access the phonebook. In addition, the group list is  
displayed on the initial screen.  
42_ © SAMSUNG Electronics Co., Ltd.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Viewing a Contact  
A phone number can be viewed based on its group saved in the phonebook.  
Select the [Menu] Æ [Call] Æ [1. Phonebook]  
Æ group.  
1
The phone number list of the given group is  
displayed.  
2
- Pressing the [OK] button displays the detailed  
information.  
- If the user selects [Send], a call can be made to the  
given number.  
Search phonebook  
The user can search a phone number saved in a phonebook by phone number or  
name.  
Select [Menu] Æ [Call] Æ [1. Phonebook]  
Æ [Search].  
Enter a name or phone number and press [OK]  
button to display a list of the searched phone  
numbers.  
- The user can search the number by inputting just the initial  
letter of the name to search.  
- Pressing the [OK] button displays detailed information.  
- If the user selects [Send], a call can be made to the given  
number.  
SMT-i5243 User Guide _43  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Adding a Contact  
This is the function used to add a phone number to the phonebook.  
The phone numbers of up to 500 people can be saved.  
Select [Menu] Æ [Call] Æ [1. Phonebook] Æ  
[Add].  
1
Enter a name and phone number, and then  
select [Save].  
2
- Phone numbers (e.g., of mobile phone, home, office,  
extension), fax, email, notes, group and ringing sound  
settings and photos can all be saved.  
Editing a Contact  
The user can edit the phone numbers registered in the phonebook.  
Select [Menu] Æ [Call] Æ [1. Phonebook] Æ  
Search Phone Number Æ Detail View Æ  
1
[Edit].  
Enter the modified information and select  
[Save].  
2
44_ © SAMSUNG Electronics Co., Ltd.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Deleting a Contact  
The phone number registered in the phonebook can be deleted.  
Select [Menu] Æ [Call] Æ [1. Phonebook] Æ  
Select Group Æ [Edit Mode].  
1
Select an item to delete and select [Delete].  
2
Selecting [Yes] deletes the number.  
3
SMT-i5243 User Guide _45  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Adding a Group  
This is the function used to add a new group.  
Select [Menu] Æ [Call] Æ [1. Phonebook] Æ  
[Edit Mode].  
1
Select [Add Group].  
2
Enter a new group name, and select [Save].  
- The ringing sound can also be set.  
3
46_ © SAMSUNG Electronics Co., Ltd.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Deleting a Group  
This is the function used to delete an existing group.  
Select [Menu] Æ [Call] Æ [1. Phonebook] Æ  
[Edit Mode].  
1
Select a group to delete, and select [Delete].  
2
Selecting [Yes] deletes the group.  
- The members of the deleted group are moved to the  
3
unspecified group.  
SMT-i5243 User Guide _47  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Call Log  
Displays the entire call Log for the recent  
inbound and outbound calls and missed  
calls. Up to 500 call logs can be saved.  
Select [Menu] Æ [Call] Æ [2. Call Log].  
Using a navigation button, the user can move  
to the list of all inbound and outbound calls,  
and missed calls.  
- By selecting [Send], the user can make a call to  
the specified number.  
- Selecting [Save] saves the selected item in the  
phonebook.  
- By selecting [Edit Mode], the user can delete a  
call log item, or the entire log.  
- If the call log item selected from the call log list  
screen is already saved in a phonebook, the  
details of the saved phone number can be viewed  
by pressing the [OK] button or a soft button on the  
right side of the screen.  
48_ © SAMSUNG Electronics Co., Ltd.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Message  
Text messages can be sent and received between  
users, and can save a created message temporarily.  
New Message  
This is the function used to create and save a message to send.  
Select [Menu] Æ [Call] Æ [3. Message] Æ  
[New Msg].  
1
- If the phone is registered in the OfficeServ, a Voice  
Message menu is added. The user can navigate  
directly to a voice message box by selecting Voice  
Messages.  
Create a new message.  
- By selecting [Save], the user can save a created  
message temporarily.  
2
- By selecting [Load], the user can retrieve the  
message saved temporarily.  
When a message is created, select  
[NumberSet] and enter the phone number  
3
where the message is to be sent.  
A message can be sent to up to 10 subscribers.  
- By selecting [Search], a phone number from a  
phonebook can be searched for.  
- Select [Send] to send a message.  
SMT-i5243 User Guide _49  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Inbox  
This is the function used to save and check the received message.  
Select [Menu] Æ [Call] Æ [3. Message] Æ  
[1.Inbox]. A list of the received messages is  
1
displayed.  
- By selecting the [Edit Mode], the user can delete  
the selected message or all messages.  
To view all message information, select the  
message and then press [OK] button.  
2
- By pressing [Reply], a reply message can be sent.  
- By selecting [Save], the user can save the phone  
number of the sender of the message.  
- By selecting [Delete], the user can delete a  
message.  
- By selecting [Call] from the soft menu, a call can be  
made to the recipient of the message.  
- By selecting [Forward] from a soft menu, the  
message can be re-sent to another person.  
50_ © SAMSUNG Electronics Co., Ltd.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Outbox  
This is the function used to save the sent messages.  
Select [Menu] Æ [Call] Æ [3. Message] Æ  
[2. Outbox]. A list of sent messages are  
1
displayed.  
- By selecting the [Edit Mode], the user can delete  
the selected message or all messages.  
To view all message information, select the  
message and then press [OK] button.  
2
- By selecting [Resend], the user can send the  
message again.  
- By selecting [Save], the user can save the phone  
number of the sender of the message.  
- By selecting [Delete], the user can delete a  
message.  
- By selecting [Call] from the soft menu, a call can be  
made to the recipient of the message.  
- By selecting [Forward] from a soft menu, the  
message can be re-sent to another person.  
SMT-i5243 User Guide _51  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Draft Messages  
This is the function used to save a created message temporarily.  
Select [Menu] Æ [Call] Æ [3. Message]  
Æ [3. Draft Messages]. A list of saved  
1
messages are displayed.  
- By selecting the [Edit Mode], the user can delete the  
selected message or all messages.  
To view all message information, select the  
message and then press [OK] button.  
2
- By selecting [Send], the user can send the specified  
message.  
- By selecting [Edit], the user can edit a message.  
- By selecting [Delete], the user can delete a message.  
Internal messages  
This is the function used to save and check the messages from extension lines.  
Select [Menu] Æ [Call] Æ [3. Message]  
Æ [4. Internal Messages].  
1
- Selecting [MSG REPLY] sends a message to a  
recipient.  
- By selecting [MSG CLEAR], the user can delete a  
message.  
- By selecting [NEXT MSG], the next received  
message can be viewed.  
52_ © SAMSUNG Electronics Co., Ltd.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Conference  
A conference group can be selected to make a conference call between the users  
registered with the group.  
Group Conference Call  
Select [Menu] Æ [Call] Æ [4. Conference] Æ  
Group.  
1
If [Connect] is selected, a conference call is  
connected.  
2
- If not connected, a connection fail icon is displayed.  
- The user can add participants to the conference call.  
Adding a Group  
Select [Menu] Æ [Call] Æ [4. Conference] Æ  
[Add Group].  
1
Enter the phone number of the participants to  
add and select [Save].  
2
- Up to 4 participants can be added.  
SMT-i5243 User Guide _53  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Directory service  
With the LDAP (Lightweight Directory Access  
Protocol), the user can search the registered users  
to view user information or make a call.  
(For information on the specific server, contact the  
server administrator.)  
Select [Menu] Æ [Call] Æ [5. Directory Service].  
- Enter name, phone number or department, and then select  
[Search].  
54_ © SAMSUNG Electronics Co., Ltd.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
UC Menu  
The user can change the settings for the buddy presence, buddy list, VOD play,  
scheduler, and XML browser.  
A buddy list is a list of users that is used to manage the real-time changes in  
status of the users registered with the presence server. This user is called a  
buddy. If the status of a user registered with a presence server is changed,  
this change is delivered in real time to the people to whom the user is registered  
as a buddy.  
SMT-i5243 User Guide _55  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connecting to Presence Server  
The user must access the presence server to set the buddy status and view a buddy  
list.  
Server Login  
Select [Menu] Æ [UC] Æ [1. Buddy Setting]  
or [Menu] Æ [UC] Æ [2. Buddy List].  
1
Enter ID and password, and change the  
automatic log-in settings.  
2
Select [Login] to connect to the server.  
3
When the login is successful, a presence screen  
or a group item is displayed.  
4
56_ © SAMSUNG Electronics Co., Ltd.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Server Logout  
Select [Menu] Æ [UC] Æ [1. Buddy Setting].  
1
2
For the logout confirmation prompt, select  
[Yes].  
- If login is not successful after setting automatic login, check the account  
information. If the problem continues, contact the administrator.  
- After logout, automatic login does not work until next login.  
SMT-i5243 User Guide _57  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Buddy Setting  
The user status information shown to the counterpart buddy can be changed.  
Select [Menu] Æ [UC] Æ [1.Buddy Setting].  
1
Select a desired status, and select [OK].  
2
Icon  
Description  
Online  
Status in which a user is connected to a buddy server  
Offline  
Logout status The user can select this to log out from the  
buddy server.  
Meeting  
Lunch  
Busy  
Status of meeting attendance  
Out to lunch.  
Busy, as a result of another job.  
If the status of a user is set to Busy, then Call Transfer may  
have been set.  
Offline  
The user has logged in, but ‘offline’ status is shown to  
buddy users.  
Do Not Disturb  
DND status (unable to receive).  
58_ © SAMSUNG Electronics Co., Ltd.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Set/Cancel Home Buddy  
The user can always check the status information of a  
selected buddy registered in the phone, on a standby  
screen.  
Select [Menu] Æ [UC] Æ [1. Buddy Setting] Æ  
[Home Buddy]. Select the buddy that is  
1
wanted to be set as a home buddy, and select  
[Change].  
Specify the location to display the home buddy,  
and select [Input].  
2
- By selecting [Disable], the home buddy setting can  
be cancelled.  
SMT-i5243 User Guide _59  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Buddy List  
This displays a buddy list. By selecting a buddy, the user can view his/her details;  
and can move the information to other groups, save/delete a phonebook, and make  
a call to the buddy.  
Search a Buddy  
A buddy can be searched for by phone number or  
name.  
- With icons, the status of a buddy can be checked.  
Add a Buddy  
The user can add a new buddy.  
Select [Menu] Æ [UC] Æ [2. Buddy List] Æ  
[Add Buddy].  
1
Enter the ID of the buddy to add. Specify a  
group, and select [OK].  
2
- The user must know the account of the buddy.  
60_ © SAMSUNG Electronics Co., Ltd.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
View/Edit/Delete Buddy Information  
The user can view, edit or delete the information held on a registered buddy.  
Select [Menu] Æ [UC] Æ [2. Buddy List]. Æ  
Select Group  
1
- By selecting [Call], the user can make a call to the  
given buddy.  
- By selecting [Add], the user can add a new buddy.  
Select [Edit Mode].  
- By selecting [HomeBuddy], the user can edit the  
2
Home Buddy items.  
- By selecting [Move], the user can move selected  
buddy to the other group.  
- By selecting [Delete], the user can remove a selected  
buddy from the list.  
Select a desired item, and select [OK].  
3
The details of the buddy are displayed.  
- By selecting [My Info], the user can view own  
4
Information.  
- By selecting [Send Message], [Call] the user can  
make a call or Send a Message to the given buddy.  
- By selecting [Save], the user can save the buddy  
member to a Phonebook.  
- By selecting [Delete], the user can delete buddy  
information.  
Upon initial access, only the other group is displayed on the screen.  
SMT-i5243 User Guide _61  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Add/Edit a Group  
The user can add a buddy group, or modify the name of an existing group.  
Select [Menu] Æ [UC] Æ [2. Buddy List] Æ  
[Edit Mode].  
1
By selecting an existing group, the user can  
edit the group name; or by selecting [Add], the  
2
user can enter the name of the group to add.  
- Select [Save], then new data is added.  
62_ © SAMSUNG Electronics Co., Ltd.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Deleting a Group  
The user can delete a buddy group.  
Select [Menu] Æ [UC] Æ [2. Buddy List] Æ  
[Edit Mode] Æ [Delete].  
1
Selecting [Yes] deletes the specified group.  
2
Set/Cancel Home Buddy  
The user can always check the status information of a selected buddy registered in  
the phone, on a standby screen.  
Select [Menu] Æ [UC] Æ [2. Buddy List] Æ  
Select Group Æ Buddy list Æ [Edit Mode],  
1
select the one that will be set as a home buddy,  
and then select [HomeBuddy].  
Specify the location to display the home buddy,  
and select [Input].  
2
- By selecting [Disable], the home buddy setting can  
be cancelled.  
SMT-i5243 User Guide _63  
Download from Www.Somanuals.com. All Manuals Search And Download.  
VOD  
The user can view and play the VOD list in the VCS (Video Contents Server).  
Select [Menu] Æ [UC] Æ [3. VOD],  
select the desired item.  
1
Selecting [OK] button displays VOD  
information.  
2
- Title, runtime and synopsis information are displayed.  
Selecting [Play] plays the VOD.  
- Using the Rewind, Pause, Fast Forward and Stop  
3
menu, play can be controlled.  
- By selecting [Full], the user can expand the screen to  
the maximum size.  
- If [Max] is selected in full screen mode, VOD is played  
on the entire LCD screen.  
Depending on LAN settings, the VOD service may experience data loss.  
In this event, wind the LAN cable, connected to the Ethernet switch, around the  
ferrite core once before using it.  
If data loss is still occurring despite this action, contact the service center.  
64_ © SAMSUNG Electronics Co., Ltd.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Scheduler  
This is the function used to register and  
manage schedules on a daily basis.  
The user can set location, time, alarm and  
ringing sound according to schedule.  
Select [Menu] Æ [UC] Æ [4. Scheduler].  
- By selecting the [Go To Date], the user can  
register schedules for a specified date.  
- By selecting [New], the user can register the  
schedule of today.  
- By selecting [All List], the user can view all the  
schedules.  
View Schedule  
Allows you to view monthly, daily, and full schedules.  
- You can view the daily schedule for a particular day by  
selecting a day on the monthly schedule screen.  
- You can view detailed event information by selecting  
individual items from the schedule list.  
Share Schedule  
By pressing the [Share Schedule] button on a  
schedule detail screen, you can send the schedule to  
multiple people in a message.  
SMT-i5243 User Guide _65  
Download from Www.Somanuals.com. All Manuals Search And Download.  
XML Browser  
The user can search and use the information provided from XML browser.  
Available information and related services may differ per server construction.  
- When an XML browser server is not constructed, the XML browser service is  
not available. To find out more about the server construction, contact the server  
administrator.  
- The XML browser server differs with each server construction.  
For information about separate services, contact the server administrator.  
Select [Menu] Æ [UC] Æ [5. XML Browser].  
1
When a server is accessed, the home page is  
displayed.  
2
Using a navigation button, the user can move  
among the items displayed on the screen.  
3
If an item is selected, and [OK] is pressed,  
the relevant link or command is executed.  
4
66_ © SAMSUNG Electronics Co., Ltd.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
XML Browser Command Icon  
On the right side of XML browser screen, icons representing many functions related  
to the page are displayed.  
Icon  
Description  
Access to the home page  
Exit browser and switch to UC menu screen  
Exit browser and switch to a standby screen  
Move to previous page  
Move to next page  
Refresh the current page  
The user cannot use those functions when the icons are not active.  
For example, if there is no previous page, the previous page icon is disabled.  
SMT-i5243 User Guide _67  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Phone Menu  
Settings can be made for screen, sound, language, and security.  
Screen  
Here, the user can make his settings for LCD  
screen.  
Idle Screen Decorations  
The wallpaper of the LCD screen can be set.  
By pressing the navigation button, the user can  
change settings for the idle screen and time  
display.  
Using the Widget, the user can select digital  
clock, analog clock, world clock, and calendar.  
Screen Brightness  
The user can adjust the brightness of the LCD  
screen by pressing a navigation button.  
68_ © SAMSUNG Electronics Co., Ltd.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
LCD Power Saving  
The user can set the time to turn off the LCD  
screen and backlight. The options are After 1  
min./After 3 min./After 10 min./Always On.  
Screen Saver  
This is the function used to set the LCD screen  
saver. The user can set the activation interval and  
screen switching interval, and select the picture of  
the screen saver.  
Spot News  
This is the function used to show the news from  
the Spot News Server on the screen. The speed of  
news scrolling can be adjusted.  
- The Scroll speed option is [Fast/Normal/Low].  
SMT-i5243 User Guide _69  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Sound  
The user can set the type and volume of the  
ringing sound and key tone.  
Volume  
By pressing the navigation button, the user can  
set the volume of a handset (receiver), speaker,  
ringing sound, key tone, page, VOC, message  
alert, and alarm respectively.  
- The options available may differ depending on the  
OfficeServ or SCM system.  
Ringing Sound  
The user can select the type of ringing sound.  
Key Tone  
The user can select the type of key tone.  
Message Alert Sound  
The user can select the type of message alert  
sound.  
70_ © SAMSUNG Electronics Co., Ltd.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Language  
This function is used to change the language  
displayed onscreen. The user can select of the  
list.  
Security  
The user can set a password which is then used  
to set the functions of the phone, and the lock  
function. This prevents other people from using  
the phone. The password should be 4-digits.  
If the phone is registered in the OfficeServ, the  
user can also set a Call Lock function.  
Phone Information  
This displays the phone model and software  
version information.  
SMT-i5243 User Guide _71  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Settings Menu  
The user can use such functions as call options, network information view, phone  
information, and initialization.  
Application Settings  
The user can set the optional functions related to  
call and message.  
Select [Menu] Æ [Settings] Æ [1. Application  
Settings].  
Call  
This is the function used to set the optional  
functions related to calls.  
The user can change settings for external CID  
display, phone number, dial mode, answer mode,  
extension line button (AOM) display, and headset  
mode.  
Message  
This is the function used to set the optional  
functions related to a message.  
The user can make settings for the display of  
received message and automatic save.  
72_ © SAMSUNG Electronics Co., Ltd.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Station On/Off  
The user can enable or disable the application  
settings.  
Extension Login  
Another person can access the phone with a  
different account and the phone also works  
according to the settings for a new user.  
SMT-i5243 User Guide _73  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Absent Message  
The user can select or cancel an automatic response message during absence.  
Select [Menu] Æ [Settings] Æ  
[2. Absent Message].  
1
Select the message type.  
- To cancel the absent message, select [Absent  
2
Message OFF].  
Select [Save] to complete the message setting.  
3
74_ © SAMSUNG Electronics Co., Ltd.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Call Forward  
This is the function used to set or cancel a call transfer method. The user can enable  
call forwarding for all calls, during busy times, or in the event of no answer.  
Select [Menu] Æ [Settings] Æ  
[3. Call Forward].  
1
Select the type of call forward, and enter a  
phone number.  
2
Select [Save] to complete the call forward  
setting.  
3
SMT-i5243 User Guide _75  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Network Information  
Displays IP, MAC information and LAN connection  
status.  
User Data Initialization  
Initializes the phone by entering a password.  
76_ © SAMSUNG Electronics Co., Ltd.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SOFT AND AOM MENUS  
This section describes the user convenience functions - soft menu and AOM.  
Menus displayed on soft menu and AOM screen may differ per system version.  
Soft Menu  
Soft menu is a user convenience function available per phone conditions. It is  
provided via interworking with the system, and displayed as a menu on the right side  
of a screen.  
Using Soft Menu  
The user can use the functions by pressing the selection button on the right side of a  
screen.  
Soft menu on a standby screen  
Soft menu in a busy state  
SMT-i5243 User Guide _77  
Download from Www.Somanuals.com. All Manuals Search And Download.  
AOM (Add On Module)  
For the user’s convenience, AOM allows users to use the various functions  
registered in the system like hotkeys. AOM becomes available when a system  
administrator registers the function in the system at the request of a user.  
The user can register either the functions provided by the system or important phone  
numbers.  
Use of AOM  
The user can use the functions by pressing the selection button on the right side of a  
screen.  
The terminal icon on a screen shows the status of functions or the registered phone  
numbers.  
AOM menu in a standby screen  
Setting DND  
78_ © SAMSUNG Electronics Co., Ltd.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TROUBLESHOOTING  
The following are examples of frequently occurring problems and solutions.  
Please check the list of solutions before requesting repair services from the service  
center.  
Please call the service center if the problem is not resolved using the following  
solutions.  
Installation and Connection  
Problems  
Solutions  
The phone is not reset  
after it is connected to the  
power supply.  
- Check if all of the cables are connected to the phone  
correctly.  
- Check if the power adapter meets the specifications.  
(Please use the optional power adapter provided. If you  
need to purchase a power adapter, please seek advice  
from the store where you purchased the phone.)  
- Disconnect the power adapter from the phone for about  
10 seconds, then reconnect.  
The phone’s functions do  
not work after the phone  
has been reset.  
- If the message ‘IP conflict’ appears on the screen, it  
means that your IP address is already being used (by a  
phone or PC). Please contact the system administrator.  
- If the message ‘ID conflict’ appears on the screen, it  
means that your ID is already being used by another  
phone. Please contact the system administrator.  
When you pick up the  
phone or press the  
- Check if the power adapter and all of the cables are  
connected to the phone correctly.  
[Speaker] button, you  
cannot hear the dial tone.  
- Check if all of the network environments, such as the IP  
address, are set up correctly. (Please refer to ‘SettingsÆ  
Menu Æ 4. Network Information’ in this user manual.)  
- Check if the IP address that has already been set up for  
the connected computer is available by using the ‘ping’  
command. If the IP address is already being used,  
contact the system administrator to receive an available  
IP address.  
SMT-i5243 User Guide _79  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Screen  
Problems  
Solutions  
Nothing is displayed on the LCD Check if the phone cables are properly connected to  
screen during the call.  
the ports. (Please refer to the section on ‘Phone  
Installation’ under ‘Preparations’ in this user manual.)  
General  
Problems  
Solutions  
The phone does not ring or the  
sound is too quiet.  
Press the [Vol] button to increase the sound.  
(Please refer to the ‘Volume Control’ section under  
‘How to Use Basic Functions’ in this manual.)  
The sound is not clear due to  
interference or crossed lines.  
If you were using the speaker, try using the handset.  
There is a lot of echoing  
during internal broadcasting.  
When you broadcast, the noise from the speaker  
may cause echoing. Maintain a distance of 1m from  
the phone.  
Caller ID does not appear on  
the LCD screen.  
- Ask the service provider whether the Caller ID  
service is activated.  
- If the user has requested to be removed from the  
Caller ID service, it will not appear on the screen.  
- If the user is calling from an area where the Caller  
ID service is not valid (e.g. making an international  
call), Caller ID will not appear on the screen.  
- If the user calls from a payphone, Caller ID will not  
appear on the screen.  
- If the user received invalid information from the  
service provider, Caller ID will not appear on the  
screen.  
- If the service provider does not provide the Caller  
ID service, Caller ID will not appear on the screen.  
The sound is not clear due to  
interference or crossed lines.  
If you were using the speaker, try using the handset.  
You are unable to access the  
main menu from the call  
Set the UC dial to a central position then you will be  
able to access the menu.  
forward or rejection screen.  
80_ © SAMSUNG Electronics Co., Ltd.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ANNEX  
Product Specifications  
The features and specifications of the SMT-i5243 are as follows.  
Features  
Specifications  
Model  
SMT-i5243  
1.25  
Weight (kg)  
Size (mm)  
223 (Width) × 223 (Length) × 133 (Thickness)  
Adapter Input Power  
Adapter Output Power  
PoE Input Power  
PoE Device  
AC 100–240 V/50–60 Hz; 0.3 A  
DC 5 V; 3 A  
DC 36–57 V (Standard 48 V)  
802.3 a/f Standard Support (For CLASS 0)  
Number of [Selection] Buttons  
Navigation Button  
Speaker Phone  
10  
Yes  
Available  
LCD  
Color Graphic LCD (480 × 272 Pixel)  
ALevel Device (Business Broadcasting Device)  
Please note that this device is registered to emit electron waves that are qualified for  
business use (Level A), therefore it is intended for use outside the home.  
SMT-i5243 User Guide _81  
Download from Www.Somanuals.com. All Manuals Search And Download.  
REQUIRED PUBLIC STATEMENT FOR  
GPL/LGPL LICENSED SOFTWARE  
USED IN THIS PRODUCT  
The following GPL and LGPL software are used in this product and are subject to the GPL/LGPL License  
Agreements included as part of this documentation:  
GPL SOFTWARE  
- Linux Kernel  
- busybox  
- cramfsck  
- wget  
- rp-pppoe  
LGPL SOFTWARE  
- ld.so  
- libc.so  
- libm.so  
- libpthread.so  
- libalsa  
- libusb  
- ortp  
To obtain the source code covered under those Licenses, please visit  
GNU GENERAL PUBLIC LICENSE  
Version 2, June 1991  
Copyright (C) 1989, 1991 Free Software Foundation, Inc.,  
51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA  
Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not  
allowed.  
Preamble  
The licenses for most software are designed to take away your freedom to share and change it. By contrast,  
the GNU General Public License is intended to guarantee your freedom to share and change free software--to  
make sure the software is free for all its users. This General Public License applies to most of the Free  
Software Foundation’s software and to any other program whose authors commit to using it. (Some other Free  
Software Foundation software is covered by the GNU Lesser General Public License instead.) You can apply it  
to your programs, too.  
When we speak of free software, we are referring to freedom, not price. Our General Public Licenses are  
designed to make sure that you have the freedom to distribute copies of free software (and charge for this  
service if you wish), that you receive source code or can get it if you want it, that you can change the software  
or use pieces of it in new free programs; and that you know you can do these things.  
82_ © SAMSUNG Electronics Co., Ltd.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
To protect your rights, we need to make restrictions that forbid anyone to deny you these rights or to ask you  
to surrender the rights. These restrictions translate to certain responsibilities for you if you distribute copies of  
the software, or if you modify it.  
For example, if you distribute copies of such a program, whether gratis or for a fee, you must give the  
recipients all the rights that you have. You must make sure that they, too, receive or can get the source code.  
And you must show them these terms so they know their rights.  
We protect your rights with two steps: (1) copyright the software, and (2) offer you this license which gives you  
legal permission to copy, distribute and/or modify the software. Also, for each author’s protection and ours,  
we want to make certain that everyone understands that there is no warranty for this free software. If the  
software is modified by someone else and passed on, we want its recipients to know that what they have is  
not the original, so that any problems introduced by others will not reflect on the original authors’ reputations.  
Finally, any free program is threatened constantly by software patents. We wish to avoid the danger that  
redistributors of a free program will individually obtain patent licenses, in effect making the program  
proprietary. To prevent this, we have made it clear that any patent must be licensed for everyone’s free use or  
not licensed at all.  
The precise terms and conditions for copying, distribution and modification follow.  
GNU GENERAL PUBLIC LICENSE  
TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION  
0. This License applies to any program or other work which contains a notice placed by the copyright holder  
saying it may be distributed under the terms of this General Public License. The "Program", below, refers  
to any such program or work, and a "work based on the Program" means either the Program or any  
derivative work under copyright law: that is to say, a work containing the Program or a portion of it, either  
verbatim or with modifications and/or translated into another language. (Hereinafter, translation is included  
without limitation in the term "modification".) Each licensee is addressed as "you". Activities other than  
copying, distribution and modification are not covered by this License; they are outside its scope. The act  
of running the Program is not restricted, and the output from the Program is covered only if its contents  
constitute a work based on the Program (independent of having been made by running the Program).  
Whether that is true depends on what the Program does.  
1. You may copy and distribute verbatim copies of the Program’s source code as you receive it, in any  
medium, provided that you conspicuously and appropriately publish on each copy an appropriate  
copyright notice and disclaimer of warranty; keep intact all the notices that refer to this License and to the  
absence of any warranty; and give any other recipients of the Program a copy of this License along with  
the Program.  
You may charge a fee for the physical act of transferring a copy, and you may at your option offer  
warranty protection in exchange for a fee.  
2. You may modify your copy or copies of the Program or any portion of it, thus forming a work based on the  
Program, and copy and distribute such modifications or work under the terms of Section 1 above,  
provided that you also meet all of these conditions:  
a) You must cause the modified files to carry prominent notices stating that you changed the files and  
the date of any change.  
b) You must cause any work that you distribute or publish, that in whole or in part contains or is derived  
from the Program or any part thereof, to be licensed as a whole at no charge to all third parties under  
the terms of this License.  
c) If the modified program normally reads commands interactively when run, you must cause it, when  
started running for such interactive use in the most ordinary way, to print or display an announcement  
including an appropriate copyright notice and a notice that there is no warranty (or else, saying that  
you provide a warranty) and that users may redistribute the program under these conditions, and  
telling the user how to view a copy of this License. (Exception: if the Program itself is interactive but  
does not normally print such an announcement, your work based on the Program is not required to  
print an announcement.)  
These requirements apply to the modified work as a whole. If identifiable sections of that work are not  
derived from the Program, and can be reasonably considered independent and separate works in  
themselves, then this License, and its terms, do not apply to those sections when you distribute them as  
SMT-i5243 User Guide _83  
Download from Www.Somanuals.com. All Manuals Search And Download.  
separate works. But when you distribute the same sections as part of a whole which is a work based on  
the Program, the distribution of the whole must be on the terms of this License, whose permissions for  
other licensees extend to the entire whole, and thus to each and every part regardless of who wrote it.  
Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by you;  
rather, the intent is to exercise the right to control the distribution of derivative or collective works based  
on the Program.  
In addition, mere aggregation of another work not based on the Program with the Program (or with a work  
based on the Program) on a volume of a storage or distribution medium does not bring the other work  
under the scope of this License.  
3. You may copy and distribute the Program (or a work based on it, under Section 2) in object code or  
executable form under the terms of Sections 1 and 2 above provided that you also do one of the following:  
a) Accompany it with the complete corresponding machine-readable source code, which must be  
distributed under the terms of Sections 1 and 2 above on a medium customarily used for software  
interchange; or,  
b) Accompany it with a written offer, valid for at least three years, to give any third party, for a charge no  
more than your cost of physically performing source distribution, a complete machine-readable copy  
of the corresponding source code, to be distributed under the terms of Sections 1 and 2 above on a  
medium customarily used for software interchange; or,  
c) Accompany it with the information you received as to the offer to distribute corresponding source  
code. (This alternative is allowed only for noncommercial distribution and only if you received the  
program in object code or executable form with such an offer, in accord with Subsection b above.)  
The source code for a work means the preferred form of the work for making modifications to it. For  
an executable work, complete source code means all the source code for all modules it contains, plus  
any associated interface definition files, plus the scripts used to control compilation and installation of  
the executable.  
However, as a special exception, the source code distributed need not include anything that is normally  
distributed (in either source or binary form) with the major components (compiler, kernel, and so on) of the  
operating system on which the executable runs, unless that component itself accompanies the executable.  
If distribution of executable or object code is made by offering access to copy from a designated place,  
then offering equivalent access to copy the source code from the same place counts as distribution of the  
source code, even though third parties are not compelled to copy the source along with the object code.  
4. You may not copy, modify, sublicense, or distribute the Program except as expressly provided under this  
License. Any attempt otherwise to copy, modify, sublicense or distribute the Program is void, and will  
automatically terminate your rights under this License. However, parties who have received copies, or  
rights, from you under this License will not have their licenses terminated so long as such parties remain in  
full compliance.  
5. You are not required to accept this License, since you have not signed it. However, nothing else grants  
you permission to modify or distribute the Program or its derivative works. These actions are prohibited by  
law if you do not accept this License. Therefore, by modifying or distributing the Program (or any work  
based on the Program), you indicate your acceptance of this License to do so, and all its terms and  
conditions for copying, distributing or modifying the Program or works based on it.  
6. Each time you redistribute the Program (or any work based on the Program), the recipient automatically  
receives a license from the original licensor to copy, distribute or modify the Program subject to these  
terms and conditions. You may not impose any further restrictions on the recipients’ exercise of the rights  
granted herein. You are not responsible for enforcing compliance by third parties to this License.  
7. If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not  
limited to patent issues), conditions are imposed on you (whether by court order, agreement or otherwise)  
that contradict the conditions of this License, they do not excuse you from the conditions of this License.  
If you cannot distribute so as to satisfy simultaneously your obligations under this License and any other  
pertinent obligations, then as a consequence you may not distribute the Program at all.  
84_ © SAMSUNG Electronics Co., Ltd.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
For example, if a patent license would not permit royalty-free redistribution of the Program by all those  
who receive copies directly or indirectly through you, then the only way you could satisfy both it and this  
License would be to refrain entirely from distribution of the Program. If any portion of this section is held  
invalid or unenforceable under any particular circumstance, the balance of the section is intended to apply  
and the section as a whole is intended to apply in other circumstances.  
It is not the purpose of this section to induce you to infringe any patents or other property right claims or  
to contest validity of any such claims; this section has the sole purpose of protecting the integrity of the  
free software distribution system, which is implemented by public license practices. Many people have  
made generous contributions to the wide range of software distributed through that system in reliance on  
consistent application of that system; it is up to the author/donor to decide if he or she is willing to  
distribute software through any other system and a licensee cannot impose that choice.  
This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this  
License.  
8. If the distribution and/or use of the Program is restricted in certain countries either by patents or by  
copyrighted interfaces, the original copyright holder who places the Program under this License may add  
an explicit geographical distribution limitation excluding those countries, so that distribution is permitted  
only in or among countries not thus excluded. In such case, this License incorporates the limitation as if  
written in the body of this License.  
9. The Free Software Foundation may publish revised and/or new versions of the General Public License  
from time to time. Such new versions will be similar in spirit to the present version, but may differ in detail  
to address new problems or concerns.  
Each version is given a distinguishing version number. If the Program specifies a version number of this  
License which applies to it and "any later version", you have the option of following the terms and  
conditions either of that version or of any later version published by the Free Software Foundation. If the  
Program does not specify a version number of this License, you may choose any version ever published  
by the Free Software Foundation.  
10. If you wish to incorporate parts of the Program into other free programs whose distribution conditions are  
different, write to the author to ask for permission.  
For software which is copyrighted by the Free Software Foundation, write to the Free Software  
Foundation; we sometimes make exceptions for this. Our decision will be guided by the two goals of  
preserving the free status of all derivatives of our free software and of promoting the sharing and reuse of  
software generally.  
NO WARRANTY  
11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE  
PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED  
IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS"  
WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT  
LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR  
PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH  
YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY  
SERVICING, REPAIR OR CORRECTION.  
12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY  
COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE THE  
PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL,  
SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO  
USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED  
INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM  
TO OPERATE WITH ANY OTHER PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN  
ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.  
SMT-i5243 User Guide _85  
Download from Www.Somanuals.com. All Manuals Search And Download.  
END OF TERMS AND CONDITIONS  
How to Apply These Terms to Your New Programs  
If you develop a new program, and you want it to be of the greatest possible use to the public, the best way to  
achieve this is to make it free software which everyone can redistribute and change under these terms.  
To do so, attach the following notices to the program. It is safest to attach them to the start of each source file  
to most effectively convey the exclusion of warranty; and each file should have at least the "copyright" line and  
a pointer to where the full notice is found.  
<one line to give the program’s name and a brief idea of what it does.>  
Copyright (C) <year> <name of author>  
This program is free software; you can redistribute it and/or modify it under the terms of the GNU General  
Public License as published by the Free Software Foundation; either version 2 of the License, or (at your  
option) any later version.  
This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the  
implied warranty of MERCHANTABILITY or FITNESS  
FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.  
You should have received a copy of the GNU General Public License along with this program; if not, write to  
the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.  
Also add information on how to contact you by electronic and paper mail.  
If the program is interactive, make it output a short notice like this when it starts in an interactive mode:  
Gnomovision version 69, Copyright (C) year name of author  
Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type ‘show w’.  
This is free software, and you are welcome to redistribute it under certain conditions; type ‘show c’ for details.  
The hypothetical commands ‘show w’ and ‘show c’ should show the appropriate parts of the General Public  
License. Of course, the commands you use may be called something other than ‘show w’ and ‘show c’; they  
could even be mouse-clicks or menu items--whatever suits your program.  
You should also get your employer (if you work as a programmer) or your school, if any, to sign a "copyright  
disclaimer" for the program, if necessary. Here is a sample; alter the names:  
Yoyodyne, Inc., hereby disclaims all copyright interest in the program ‘Gnomovision’ (which makes passes at  
compilers) written by James Hacker.  
<signature of Ty Coon>, 1 April 1989  
Ty Coon, President of Vice  
This General Public License does not permit incorporating your program into proprietary programs. If your  
program is a subroutine library, you may consider it more useful to permit linking proprietary applications with  
the library. If this is what you want to do, use the GNU Lesser General Public License instead of this License.  
86_ © SAMSUNG Electronics Co., Ltd.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
GNU LESSER GENERAL PUBLIC LICENSE  
Version 2.1, February 1999  
Copyright (C) 1991, 1999 Free Software Foundation, Inc.  
51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA  
Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it  
is not allowed.  
[This is the first released version of the Lesser GPL. It also counts as the successor of the GNU Library  
Public License, version 2, hence the version number 2.1.]  
Preamble  
The licenses for most software are designed to take away your freedom to share and change it. By contrast,  
the GNU General Public Licenses are intended to guarantee your freedom to share and change free software--  
to make sure the software is free for all its users.  
This license, the Lesser General Public License, applies to some specially designated software packages--  
typically libraries--of the Free Software Foundation and other authors who decide to use it. You can use it too,  
but we suggest you first think carefully about whether this license or the ordinary General Public License is the  
better strategy to use in any particular case, based on the explanations below.  
When we speak of free software, we are referring to freedom of use, not price.  
Our General Public Licenses are designed to make sure that you have the freedom to distribute copies of free  
software (and charge for this service if you wish); that you receive source code or can get it if you want it; that  
you can change the software and use pieces of it in new free programs; and that you are informed that you  
can do these things.  
To protect your rights, we need to make restrictions that forbid distributors to deny you these rights or to ask  
you to surrender these rights. These restrictions translate to certain responsibilities for you if you distribute  
copies of the library or if you modify it.  
For example, if you distribute copies of the library, whether gratis or for a fee, you must give the recipients all  
the rights that we gave you.  
You must make sure that they, too, receive or can get the source code. If you link other code with the library,  
you must provide complete object files to the recipients, so that they can re-link them with the library after  
making changes to the library and recompiling it. And you must show them these terms so they know their  
rights.  
We protect your rights with a two-step method: (1) we copyright the library, and (2) we offer you this license,  
which gives you legal permission to copy, distribute and/or modify the library.  
To protect each distributor, we want to make it very clear that there is no warranty for the free library. Also, if  
the library is modified by someone else and passed on, the recipients should know that what they have is not  
the original version, so that the original author’s reputation will not be affected by problems that might be  
introduced by others.  
Finally, software patents pose a constant threat to the existence of any free program. We wish to make sure  
that a company cannot effectively restrict the users of a free program by obtaining a restrictive license from a  
patent holder. Therefore, we insist that any patent license obtained for a version of the library must be  
consistent with the full freedom of use specified in this license.  
Most GNU software, including some libraries, is covered by the ordinary GNU General Public License. This  
license, the GNU Lesser General Public License, applies to certain designated libraries, and is quite different  
from the ordinary General Public License. We use this license for certain libraries in order to permit linking  
those libraries into non-free programs.  
When a program is linked with a library, whether statically or using a shared library, the combination of the two  
is legally speaking a combined work, a derivative of the original library. The ordinary General Public License  
therefore permits such linking only if the entire combination fits its criteria of freedom. The Lesser General  
Public License permits more lax criteria for linking other code with the library.  
We call this license the "Lesser" General Public License because it does Less to protect the user’s freedom  
than the ordinary General Public License. It also provides other free software developers Less of an advantage  
over competing non-free programs. These disadvantages are the reason we use the ordinary General Public  
License for many libraries. However, the Lesser license provides advantages in certain special circumstances.  
SMT-i5243 User Guide _87  
Download from Www.Somanuals.com. All Manuals Search And Download.  
For example, on rare occasions, there may be a special need to encourage the widest possible use of a  
certain library, so that it becomes a de-facto standard. To achieve this, non-free programs must be allowed to  
use the library. A more frequent case is that a free library does the same job as widely used non-free libraries.  
In this case, there is little to gain by limiting the free library to free software only, so we use the Lesser General  
Public License.  
In other cases, permission to use a particular library in non-free programs enables a greater number of people  
to use a large body of free software.  
For example, permission to use the GNU C Library in non-free programs enables many more people to use the  
whole GNU operating system, as well as its variant, the GNU/Linux operating system.  
Although the Lesser General Public License is Less protective of the users’ freedom, it does ensure that the  
user of a program that is linked with the Library has the freedom and the wherewithal to run that program  
using a modified version of the Library.  
The precise terms and conditions for copying, distribution and modification follow. Pay close attention to the  
difference between a "work based on the library" and a "work that uses the library". The former contains code  
derived from the library, whereas the latter must be combined with the library in order to run.  
GNU LESSER GENERAL PUBLIC LICENSE  
TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION  
0. This License Agreement applies to any software library or other program which contains a notice placed  
by the copyright holder or other authorized party saying it may be distributed under the terms of this  
Lesser General Public License (also called "this License"). Each licensee is addressed as "you".  
A "library" means a collection of software functions and/or data prepared so as to be conveniently linked  
with application programs (which use some of those functions and data) to form executables.  
The "Library", below, refers to any such software library or work which has been distributed under these  
terms. A "work based on the Library" means either the Library or any derivative work under copyright law:  
that is to say, a work containing the Library or a portion of it, either verbatim or with modifications and/or  
translated straightforwardly into another language. (Hereinafter, translation is included without limitation in  
the term "modification".)  
"Source code" for a work means the preferred form of the work for making modifications to it. For a library,  
complete source code means all the source code for all modules it contains, plus any associated interface  
definition files, plus the scripts used to control compilation and installation of the library.  
Activities other than copying, distribution and modification are not covered by this License; they are  
outside its scope. The act of running a program using the Library is not restricted, and output from such a  
program is covered only if its contents constitute a work based on the Library (independent of the use of  
the Library in a tool for writing it). Whether that is true depends on what the Library does and what the  
program that uses the Library does.  
1. You may copy and distribute verbatim copies of the Library’s complete source code as you receive it, in  
any medium, provided that you conspicuously and appropriately publish on each copy an appropriate  
copyright notice and disclaimer of warranty; keep intact all the notices that refer to this License and to the  
absence of any warranty; and distribute a copy of this License along with the Library.  
You may charge a fee for the physical act of transferring a copy, and you may at your option offer  
warranty protection in exchange for a fee.  
2. You may modify your copy or copies of the Library or any portion of it, thus forming a work based on the  
Library, and copy and distribute such modifications or work under the terms of Section 1 above, provided  
that you also meet all of these conditions:  
a) The modified work must itself be a software library.  
b) You must cause the files modified to carry prominent notices stating that you changed the files and  
the date of any change.  
c) You must cause the whole of the work to be licensed at no charge to all third parties under the terms  
of this License.  
d) If a facility in the modified Library refers to a function or a table of data to be supplied by an  
application program that uses the facility, other than as an argument passed when the facility is  
invoked, then you must make a good faith effort to ensure that, in the event an application does not  
88_ © SAMSUNG Electronics Co., Ltd.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
supply such function or table, the facility still operates, and performs whatever part of its purpose  
remains meaningful. (For example, a function in a library to compute square roots has a purpose that  
is entirely well-defined independent of the application. Therefore, Subsection 2d requires that any  
application-supplied function or table used by this function must be optional: if the application does  
not supply it, the square root function must still compute square roots.)  
These requirements apply to the modified work as a whole. If identifiable sections of that work are not  
derived from the Library, and can be reasonably considered independent and separate works in  
themselves, then this License, and its terms, do not apply to those sections when you distribute them  
as separate works. But when you distribute the same sections as part of a whole which is a work  
based on the Library, the distribution of the whole must be on the terms of this License, whose  
permissions for other licensees extend to the entire whole, and thus to each and every part regardless  
of who wrote it.  
Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by  
you; rather, the intent is to exercise the right to control the distribution of derivative or collective  
works based on the Library.  
In addition, mere aggregation of another work not based on the Library with the Library (or with a work  
based on the Library) on a volume of a storage or distribution medium does not bring the other work  
under the scope of this License.  
3. You may opt to apply the terms of the ordinary GNU General Public License instead of this License to a  
given copy of the Library. To do this, you must alter all the notices that refer to this License, so that they  
refer to the ordinary GNU General Public License, version 2, instead of to this License.  
(If a newer version than version 2 of the ordinary GNU General Public License has appeared, then you can  
specify that version instead if you wish.)  
Do not make any other change in these notices.  
Once this change is made in a given copy, it is irreversible for that copy, so the ordinary GNU General  
Public License applies to all subsequent copies and derivative works made from that copy.  
This option is useful when you wish to copy part of the code of the Library into a program that is not a  
library.  
4. You may copy and distribute the Library (or a portion or derivative of it, under Section 2) in object code or  
executable form under the terms of Sections 1 and 2 above provided that you accompany it with the  
complete corresponding machine-readable source code, which must be distributed under the terms of  
Sections 1 and 2 above on a medium customarily used for software interchange. If distribution of object  
code is made by offering access to copy from a designated place, then offering equivalent access to copy  
the source code from the same place satisfies the requirement to distribute the source code, even though  
third parties are not compelled to copy the source along with the object code.  
5. A program that contains no derivative of any portion of the Library, but is designed to work with the  
Library by being compiled or linked with it, is called a "work that uses the Library". Such a work, in  
isolation, is not a derivative work of the Library, and therefore falls outside the scope of this License.  
However, linking a "work that uses the Library" with the Library creates an executable that is a derivative  
of the Library (because it contains portions of the Library), rather than a "work that uses thelibrary". The  
executable is therefore covered by this License. Section 6 states terms for distribution of such  
executables.  
When a "work that uses the Library" uses material from a header file that is part of the Library, the object  
code for the work may be a derivative work of the Library even though the source code is not. Whether  
this is true is especially significant if the work can be linked without the Library, or if the work is itself a  
library. The threshold for this to be true is not precisely defined by law.  
If such an object file uses only numerical parameters, data structure layouts and accessors, and small  
macros and small inline functions (ten lines or less in length), then the use of the object file is unrestricted,  
regardless of whether it is legally a derivative work. (Executables containing this object code plus portions  
of the Library will still fall under Section 6.)  
Otherwise, if the work is a derivative of the Library, you may distribute the object code for the work under  
the terms of Section 6. Any executables containing that work also fall under Section 6, whether or not they  
are linked directly with the Library itself.  
6. As an exception to the Sections above, you may also combine or link a "work that uses the Library" with  
the Library to produce a work containing portions of the Library, and distribute that work under terms of  
your choice, provided that the terms permit modification of the work for the customer’s own use and  
reverse engineering for debugging such modifications.  
SMT-i5243 User Guide _89  
Download from Www.Somanuals.com. All Manuals Search And Download.  
You must give prominent notice with each copy of the work that the Library is used in it and that the  
Library and its use are covered by this License. You must supply a copy of this License. If the work during  
execution displays copyright notices, you must include the copyright notice for the Library among them,  
as well as a reference directing the user to the copy of this License. Also, you must do one of these things:  
a) Accompany the work with the complete corresponding machine-readable source code for the Library  
including whatever changes were used in the work (which must be distributed under Sections 1 and 2  
above); and, if the work is an executable linked with the Library, with the complete machine-readable  
"work that uses the Library", as object code and/or source code, so that the user can modify the  
Library and then re-link to produce a modified executable containing the modified Library. (It is  
understood that the user who changes the contents of definitions files in the Library will not  
necessarily be able to recompile the application to use the modified definitions.)  
b) Use a suitable shared library mechanism for linking with the Library.  
A suitable mechanism is one that (1) uses at run time a copy of the library already present on the  
user’s computer system, rather than copying library functions into the executable, and (2) will operate  
properly with a modified version of the library, if the user installs one, as long as the modified version  
is interface-compatible with the version that the work was made with.  
c) Accompany the work with a written offer, valid for at least three years, to give the same user the  
materials specified in Subsection 6a, above, for a charge no more than the cost of performing this  
distribution.  
d) If distribution of the work is made by offering access to copy from a designated place, offer  
equivalent access to copy the above specified materials from the same place.  
e) Verify that the user has already received a copy of these materials or that you have already sent this  
user a copy.  
For an executable, the required form of the "work that uses the Library" must include any data and utility  
programs needed for reproducing the executable from it. However, as a special exception, the materials  
to be distributed need not include anything that is normally distributed (in either source or binary form)  
with the major components (compiler, kernel, and so on) of the operating system on which the executable  
runs, unless that component itself accompanies the executable.  
It may happen that this requirement contradicts the license restrictions of other proprietary libraries that  
do not normally accompany the operating system. Such a contradiction means you cannot use both them  
and the Library together in an executable that you distribute.  
7. You may place library facilities that are a work based on the Library side-by-side in a single library  
together with other library facilities not covered by this License, and distribute such a combined library,  
provided that the separate distribution of the work based on the Library and of the other library facilities is  
otherwise permitted, and provided that you do these two things:  
a) Accompany the combined library with a copy of the same work based on the Library, uncombined  
with any other library facilities. This must be distributed under the terms of the Sections above.  
b) Give prominent notice with the combined library of the fact that part of it is a work based on the  
Library, and explaining where to find the accompanying uncombined form of the same work.  
8. You may not copy, modify, sublicense, link with, or distribute the Library except as expressly provided  
under this License. Any attempt otherwise to copy, modify, sublicense, link with, or distribute the Library is  
void, and will automatically terminate your rights under this License. However, parties who have received  
copies, or rights, from you under this License will not have their licenses terminated so long as such  
parties remain in full compliance.  
9. You are not required to accept this License, since you have not signed it. However, nothing else grants  
you permission to modify or distribute the Library or its derivative works. These actions are prohibited by  
law if you do not accept this License. Therefore, by modifying or distributing the Library (or any work  
based on the Library), you indicate your acceptance of this License to do so, and all its terms and  
conditions for copying, distributing or modifying the Library or works based on it.  
10. Each time you redistribute the Library (or any work based on the Library), the recipient automatically  
receives a license from the original licensor to copy, distribute, link with or modify the Library subject to  
these terms and conditions. You may not impose any further restrictions on the recipients’ exercise of the  
rights granted herein. You are not responsible for enforcing compliance by third parties with this License.  
90_ © SAMSUNG Electronics Co., Ltd.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
11. If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not  
limited to patent issues), conditions are imposed on you (whether by court order, agreement or otherwise)  
that contradict the conditions of this License, they do not excuse you from the conditions of this License.  
If you cannot distribute so as to satisfy simultaneously your obligations under this License and any other  
pertinent obligations, then as a consequence you may not distribute the Library at all. For example, if a  
patent license would not permit royalty-free redistribution of the Library by all those who receive copies  
directly or indirectly through you, then the only way you could satisfy both it and this License would be to  
refrain entirely from distribution of the Library.  
If any portion of this section is held invalid or unenforceable under any particular circumstance, the  
balance of the section is intended to apply, and the section as a whole is intended to apply in other  
circumstances.  
It is not the purpose of this section to induce you to infringe any patents or other property right claims or  
to contest validity of any such claims; this section has the sole purpose of protecting the integrity of the  
free software distribution system which is implemented by public license practices. Many people have  
made generous contributions to the wide range of software distributed through that system in reliance on  
consistent application of that system; it is up to the author/donor to decide if he or she is willing to  
distribute software through any other system and a licensee cannot impose that choice.  
This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this  
License.  
12. If the distribution and/or use of the Library is restricted in certain countries either by patents or by  
copyrighted interfaces, the original copyright holder who places the Library under this License may add an  
explicit geographical distribution limitation excluding those countries, so that distribution is permitted only  
in or among countries not thus excluded. In such case, this License incorporates the limitation as if written  
in the body of this License.  
13. The Free Software Foundation may publish revised and/or new versions of the Lesser General Public  
License from time to time. Such new versions will be similar in spirit to the present version, but may differ  
in detail to address new problems or concerns.  
Each version is given a distinguishing version number. If the Library specifies a version number of this  
License which applies to it and "any later version", you have the option of following the terms and  
conditions either of that version or of any later version published by the Free Software Foundation. If the  
Library does not specify a license version number, you may choose any version ever published by the Free  
Software Foundation.  
14. If you wish to incorporate parts of the Library into other free programs whose distribution conditions are  
incompatible with these, write to the author to ask for permission. For software which is copyrighted by  
the Free Software Foundation, write to the Free Software Foundation; we sometimes make exceptions for  
this. Our decision will be guided by the two goals of preserving the free status of all derivatives of our free  
software and of promoting the sharing and reuse of software generally.  
NO WARRANTY  
15. BECAUSE THE LIBRARY IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE  
LIBRARY, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN  
WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE LIBRARY "AS IS"  
WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT  
LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR  
PURPOSE.  
THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE LIBRARY IS WITH YOU. SHOULD  
THE LIBRARY PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR  
OR CORRECTION.  
16. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY  
COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE THE  
LIBRARY AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL,  
SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO  
USE THE LIBRARY (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED  
INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE LIBRARY  
TO OPERATE WITH ANY OTHER SOFTWARE), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN  
ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.  
SMT-i5243 User Guide _91  
Download from Www.Somanuals.com. All Manuals Search And Download.  
END OF TERMS AND CONDITIONS  
How to Apply These Terms to Your New Libraries  
If you develop a new library, and you want it to be of the greatest possible use to the public, we recommend  
making it free software that everyone can redistribute and change. You can do so by permitting redistribution  
under these terms (or, alternatively, under the terms of the ordinary General Public License).  
To apply these terms, attach the following notices to the library. It is safest to attach them to the start of each  
source file to most effectively convey the exclusion of warranty; and each file should have at least the  
"copyright" line and a pointer to where the full notice is found.  
<one line to give the library’s name and a brief idea of what it does.>  
Copyright (C) <year> <name of author>  
This library is free software; you can redistribute it and/or modify it under the terms of the GNU Lesser General  
Public License as published by the Free Software Foundation; either version 2.1 of the License, or (at your  
option) any later version.  
This library is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the  
implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser  
General Public License for more details.  
You should have received a copy of the GNU Lesser General Public License along with this library; if not, write  
to the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA  
Also add information on how to contact you by electronic and paper mail.  
You should also get your employer (if you work as a programmer) or your school, if any, to sign a "copyright  
disclaimer" for the library, if necessary. Here is a sample; alter the names:  
Yoyodyne, Inc., hereby disclaims all copyright interest in the library ‘Frob’ (a library for tweaking knobs) written  
by James Random Hacker.  
<signature of Ty Coon>, 1 April 1990 Ty Coon, President of Vice  
That’s all there is to it!  
92_ © SAMSUNG Electronics Co., Ltd.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Download from Www.Somanuals.com. All Manuals Search And Download.  

RBH Sound Speaker PC 10 User Guide
Reliable Sewing Machine XD 510L User Guide
Roland Musical Instrument TD 20K User Guide
Samsung Air Conditioner Split type Room Air Conditioner User Guide
Samsung Cell Phone 07272010 User Guide
Sansui Flat Panel Television SLED2400 User Guide
Sanyo CD Player FXCD 500 User Guide
Sanyo CRT Television DS27820 02 User Guide
Scag Power Equipment Lawn Mower STT 29DFI User Guide
Sears Battery Charger 200713201 User Guide