HT-E3500
5.1CH Blu-ray™
Home Entertainment System
user manual
imagine the possibilities
Thank you for purchasing this Samsung product.
To receive more complete service,
please register your product at
Download from Www.Somanuals.com. All Manuals Search And Download.
Disc Storage & Management
Handling Cautions
• Holding Discs
• Do not expose this apparatus to dripping or
splashing. Do not put objects filled with liquids,
such as vases, on the apparatus.
• To turn this apparatus off completely, you must
pull the power plug out of the wall socket.
Consequently, the power plug must be easily
and readily accessible at all times.
• Do not touch the power plug with a wet hand.
It can cause an electric shock.
• Do not plug multiple electric devices into the
same wall socket. Ovedrloading a socket can
cause it to overheat, resulting in a fire.
- Fingerprints or scratches on
a disc may reduce sound and
picture quality or cause skipping.
- Avoid touching the surface of a disc where
data has been recorded.
- Hold the disc by the edges so that fingerprints
will not get on the surface.
- Do not stick paper or tape on the disc.
• Cleaning Discs
- If you get fingerprints or dirt on a
disc, clean it with a mild detergent
diluted in water and wipe with a
soft cloth.
- When cleaning, wipe gently from
the inside to the outside of the disc.
• Maintenance of the Cabinet
- Before connecting other components to this
product, be sure to turn them off.
- If you move your product suddenly from a
cold place to a warm place, condensation
may occur on the operating parts and lens
and cause abnormal disc playback. If this
occurs, unplug the product, wait for two
hours, and then connect the plug to the
power outlet. Then, insert the disc, and try to
play back again.
- Disc Storage
` Do not keep in direct sunlight.
` Keep in a cool ventilated area.
` Keep in a clean protection jacket and store
vertically.
• If the product makes an abnormal noise or
produces a burning smell or smoke, turn off
the power switch immediately and disconnect
the power plug from the wall outlet. Then,
contact the nearest customer service center for
technical assistance. Do not use the product.
Using the product as it is may cause a fire or an
electric shock.
• To turn this apparatus off completely, you must
pull the power plug out of the wall socket.
Consequently, the power plug must be easily
and readily accessible at all times.
|
English
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety Information
- Place the 3D video screen at eye level for the
best 3D picture.
Using the 3D Function
IMPORTANT HEALTH AND SAFETY
INFORMATION FOR 3D PICTURES.
Read and understand the following safety
information before using the 3D function.
• When the product is connected to some 3D
devices, the 3D effect may not function properly.
• This product does not convert 2D content into
3D.
• Some viewers may experience discomfort while
viewing 3D TV such as dizziness, nausea, and
headaches.
• “Blu-ray 3D” and “Blu-ray 3D” logo are
trademarks of the Blu-ray Disc Association.
If you experience any such symptom, stop
viewing 3D TV, remove the 3D Active Glasses,
and rest.
Copyright
• Watching 3D images for an extended period of
time may cause eye strain. If you feel eye strain,
stop viewing 3D TV, remove your 3D Active
Glasses, and rest.
• A responsible adult should frequently check on
children who are using the 3D function.
If there are any reports of tired eyes, headaches,
dizziness, or nausea, have the child stop viewing
3D TV and rest.
© 2012 Samsung Electronics Co.,Ltd.
All rights reserved; No part or whole of this user’s
manual may be reproduced or copied without the
prior written permission of Samsung Electronics
Co.,Ltd.
• Do not use the 3D Active Glasses for other
purposes (such as general eyeglasses,
sunglasses, protective goggles, etc.)
• Do not use the 3D function or 3D Active Glasses
while walking or moving around. Using the 3D
function or 3D Active Glasses while moving
around may cause you to bump into objects,
trip, and/or fall, and cause serious injury.
• If you want to enjoy 3D content, connect a 3D
device (3D compliant AV receiver or TV) to the
product’s HDMI OUT port using a high-speed
HDMI cable. Put on 3D glasses before playing
the 3D content.
• The product outputs 3D signals only through
HDMI cable connected to the HDMI OUT port.
• As the video resolution in 3D play mode is fixed
according to the resolution of the original 3D
video, you can not change the resolution to your
preference.
• Some functions such as BD Wise, screen size
adjustment, and resolution adjustment may not
operate properly in 3D play mode.
• You must use a high-speed HDMI cable for
proper output of the 3D signal.
• Stay at least three times the width of the screen
from the TV when watching 3D images. For
example, if you have a 46 inch screen, stay 3.5
meters from the screen.
|
4
English
Download from Www.Somanuals.com. All Manuals Search And Download.
License
• The terms HDMI and HDMI High-Definition
Multimedia Interface, and the HDMI Logo are
trademarks or registered trademarks of HDMI
Licensing LLC in the United States and other
• Dolby and the double-D symbol are registered
trademarks of Dolby Laboratories.
countries.
• Manufactured under license under U.S. Patent
Nos: 5,956,674; 5,974,380; 6,226,616;
• Oracle and Java are registered trademarks of
Oracle and/or its affiliates. Other names may be
trademarks of their respective owners.
6,487,535; 7,392,195; 7,272,567; 7,333,929;
7,212,872 & other U.S. and worldwide patents
issued & pending. DTS-HD, the Symbol, & DTS-
HD and the Symbol together are registered
trademarks & DTS-HD Master Audio | Essential
is a trademark of DTS, Inc. Product includes
software. © DTS, Inc. All Rights Reserved.
• This item incorporates copy protection
technology that is protected by U.S. patents
and other intellectual property rights of
Rovi Corporation. Reverse engineering and
disassembly are prohibited.
• Blu-ray Disc™, Blu-ray™, and the logos are
trademarks of Blu-ray Disc Association.
• ABOUT DIVX VIDEO: DivX® is a digital video
format created by DivX, LLC, a subsidiary
of Rovi Corporation. This is an official DivX
Certified® device that plays DivX video. Visit
divx.com for more information and software
tools to convert your files into DivX videos.
• This product uses Cinavia technology to
limit the use of unauthorized copies of some
commercially-produced film and videos and
their soundtracks. When a prohibited use of an
unauthorized copy is detected, a message will
be displayed and playback or copying will be
interrupted.
More information about Cinavia technology
is provided at the Cinavia Online Consumer
To request additional information about Cinavia
by mail, send a postcard with your mailing
address to: Cinavia Consumer Information
Center, P.O. Box 86851, San Diego, CA, 92138,
USA.”
ABOUT DIVX VIDEO-ON-DEMAND: This DivX
Certified® device must be registered in order to
play purchased DivX Video-on-Demand (VOD)
movies. To obtain your registration code, locate
the DivX VOD section in your device setup
menu. Go to vod.divx.com for more information
on how to complete your registration.
DivX Certified® to play DivX® video up to HD
1080p, including premium content.
DivX®, DivX Certified® and associated logos
are trademarks of Rovi Corporation or its
subsidiaries and are used under license.
Covered by one or more of the following U.S.
patents : 7,295,673; 7,460,668; 7,515,710;
7,519,274
This product incorporates proprietary technology
under license from Verance Corporation and is
protected by U.S. Patent 7,369,677 and other
U.S. and worldwide patents issued and pending
as well as copyright and trade secret protection
for certain aspects of such technology. Cinavia
is a trademark of Verance Corporation.
Copyright 2004-2010 Verance Corporation. All
rights reserved by Verance. Reverse engineering
or disassembly is prohibited.
|
English
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
SAFETY INFORMATION
SETTINGS
2
3
3
4
4
5
Warning
19 The Initial Settings Procedure
20 The Home Screen
20 Accessing the Settings Screen
21 Settings Menu Functions
24 Networks and the Internet
26 Upgrading Software
Disc Storage & Management
Handling Cautions
Using the 3D Function
Copyright
License
27 Setting Up AllShare
MEDIA PLAY
GETTING STARTED
28 Using the Streaming Media Services
28 Playing Files on a USB Device
7
8
Disk and Format Compatibility
Logos of Discs the product can play
29 Playing a Disc with User Recorded
11 Accessories
12 Front Panel
12 Rear Panel
Content
29 Playing a Commercial Video Disc
29 Playing a Pre-Recorded Commercial
13 Remote Control
Audio Disc
30 Controlling Video Playback
32 Controlling Music Playback
33 Controlling Photo Playback
33 Listening to Radio
34 Using the Special Effects Remote Control
Buttons
34 Using BD-LIVE™
CONNECTIONS
14 Connecting the Speakers
14
15
Speaker Components
Connecting The Speakers
16 Connecting to a TV
35 Using AllShare
16
Connecting to a TV
Method 1
with an HDMI Cable - Best Quality
(Recommended)
APPENDIX
16
Connecting to a TV with an
Method 2
Video Cable - Good Quality
17 Connecting to External Devices
36 Additional Information
41 Troubleshooting
44 Specifications
17
AUX IN : Connecting an
Method 1
External Analog Component
17
OPTICAL : Connecting an
Method 2
External Digital Audio Component
18 Connecting the FM Antenna
18 Connecting to a Network Router
|
6
English
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
Disk and Format Compatibility
Disc types and contents your product can play
Media
Disc Type
Details
Blu-ray Disc
3D Blu-ray Disc
BD-ROM or BD-RE/-R disc recorded in the BD-RE format.
VIDEO
DVD-VIDEO, DVD-RW,
DVD-R, DVD+RW,
DVD+R
DVD-VIDEO, recorded DVD+RW/DVD-RW(V)/DVDR/+R discs that have
been recorded and finalized, or a USB storage media containing MKV, MP4
contents.
CD-RW/-R, DVD-RW/-R, Music recorded on CD-RW/-R, DVD-RW/-R, BD-RE/-R discs or a USB storage
BD-RE/-R media containing MP3 or WMA contents.
MUSIC
PHOTO
CD-RW/-R, DVD-RW/-R, Photos recorded on CD-RW/-R, DVD-RW/-R, BD-RE/-R discs or a USB storage
BD-RE/-R media containing JPEG contents.
|
NOTE
|
\ The product may not play certain CD-RW/-R and DVD-R because of the disc type or recording conditions.
\ If a DVD-RW/-R disc has not been recorded properly in DVD video format, it will not be playable.
\ Your product will not play content that has been recorded on a DVD-R at a bitrate that exceeds 10 Mbps.
\ Your product will not play content that has been recorded on a BD-R or USB device at a bitrate that exceeds 30 Mbps.
\ Playback may not work for some types of discs, or when you use specific operations, such as angle change and aspect ratio
adjustment. Information about the discs is written in detail on the disc box. Please refer to this if necessary.
\ When you play a BD-J title, loading may take longer than a normal title or some functions may perform slowly.
Disc types your product cannot play
• HD DVD
• DVD-ROM/PD/MV-
Disc, etc
• DVD-RAM
• Super Audio CD
(except CD layer)
• DVD-RW(VR mode)
• CVD/CD-ROM/CDV/
CD-G/CD-I/LD
• 3.9 GB DVD-R Disc for
Authoring.
(CD-Gs play audio only,
not graphics.)
|
NOTE
|
\ This product may not respond to all operating commands because some Blu-ray Disc, DVD, and CD discs allow specific or
limited operation and provide only certain features during playback.
Please note that this is not a defect in the product.
\ Samsung cannot guarantee that this product will play every disc bearing the Blu-ray Disc, DVD or CD logo because disc
formats evolve, and problems and errors may occur during the creation of Blu-ray Disc, DVD, and CD software and/or the
manufacture of discs.
\ Please contact the SAMSUNG Customer Care Center, if you have questions or encounter difficulty when playing Blu-ray Disc,
DVD, or CD discs in this product. Also, refer to rest of this user manual for additional information on playback restrictions.
\ Some commercial discs and DVD discs purchased outside your region may not play on this product.
|
English
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
Region Code
Logos of Discs the product can play
Blu-ray players and discs are coded by region.
These regional codes must match for a disc to
play. If the codes do not match, the disc will not
play.
The Region Number for this product is displayed
on the rear panel of the product.
Blu-ray Disc
3D Blu-ray Disc
Region
Code
Disc Type
Area
North America, Central America,
South America, Korea, Japan,
Taiwan, Hong Kong and South
East Asia.
A
BD-LIVE
DTS
Dolby
Europe, Greenland, French
territories, Middle East, Africa,
Australia and New Zealand.
Blu-ray Disc
B
PAL broadcast system in
U.K, France, Germany, etc.
India, China, Russia, Central and
South Asia.
C
1
2
3
The U.S., U.S. territories and
Canada
Europe, Japan, the Middle East,
Egypt, South Africa, Greenland
Java
Taiwan, Korea, the Philippines,
Indonesia, Hong Kong
Supported File Formats
Mexico, South America,
Central America, Australia,
New Zealand, Pacific Islands,
Caribbean
DVD-VIDEO
Notes on the USB connection
4
• Your player supports USB storage media, MP3
players, digital cameras, and USB card readers.
Russia, Eastern Europe, India,
most of Africa, North Korea,
Mongolia
• The player does not support folder or file names
longer than 128 characters.
5
6
• Some USB/External HDD/digital camera devices
may not be compatible with the player.
• Your player supports the FAT16, FAT32, and
NTFS files systems.
China
• Connect USB devices directly to the player’s
USB port. Connecting through a USB cable
may cause compatibility problems.
• Inserting more than one memory device into
a multi-card reader may cause the reader to
operate improperly.
|
NOTE
|
\
If the Region number of a Blu-ray Disc/DVDs does not
correspond to the Region number of this product, the
product cannot play the disc.
• The player does not support the PTP protocol.
• Do not disconnect a USB device during a
“loading” process.
|
8
English
Download from Www.Somanuals.com. All Manuals Search And Download.
• The bigger the image resolution, the longer the image takes to display.
• This player cannot play MP3 files with DRM (Digital Rights Management) downloaded from commercial
sites.
• Your player only supports the video that is under 30fps (frame rate).
• You must remove the USB storage device safely (by performing the “Safely Remove USB” function) to
prevent possible damage to the USB memory.
Press the HOME button to move to the home menu, press the YELLOW (C) button, and then press
the
button.
v
• SAMSUNG is not responsible for any data file damage or data loss.
Video File Support
File Extension
Container
Video Codec
Audio Codec
Resolution
MP3
AC3
DTS
DivX 3.11/4.x/5.1/6.0
MP4v3
1920x1080
1920x1080
*.avi
AVI
WMA
PCM
1920x1080
H.264 BP/MP/HP
1920x1080
1920x1080
1920x1080
1920x1080
1920x1080
1920x1080
1920x1080
1920x1080
1920x1080
1920x1080
VC-1 AP
DivX 5.1/6.0
H.264 BP/MP/HP
VC-1 AP
MP3
AC3
DTS
*.mkv
MKV
*.wmv
*.mp4
WMV (wmv9)
MP4
WMA
AAC
VC-1 SM
MP4 (mp4v)
H.264 BP/MP/HP
MPEG1
MP1, 2
Dolby Digital
DTS
*.mpg
*.mpeg
PS
MPEG2
H.264 BP/MP/HP
` Limitations
- Even when the file is encoded by a supported codec mentioned above, a file might not be played if its
content has a problem.
- Normal playback is not guaranteed if the file’s container information is wrong or the file itself is
corrupted.
- Files having a higher Bitrate or frame rate than standard may stutter during sound/video playback.
- The Seek (skip) function is not available if the file’s index table is damaged.
` Video decoder
- Supports up to H.264 Level 4.1 and AVCHD
- Does not support H.264 FMO/ASO/RS and VC1 SP/MP/AP L4
- MPEG4 SP, ASP :
Below 1280 x 720 : 60 frames max
|
English
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
Above 1280 x 720 : 30 frames max
- Does not support GMC 2 or higher
` Audio decoder
- Supports WMA 7, 8, 9 and STD
- Does not support WMA sampling rate of 22050Hz mono.
Music File Support
File Extension
*.mp3
Container
MP3
Audio Codec
MP3
Support Range
-
Sampling rates (in kHz) - 8, 11, 16, 22, 32, 44.1, 48
Bitrates - All bit-rates from 5kbps to 384kbps
ƒ
ƒ
*.wma
WMA
WMA
AVCHD (Advanced Video Codec High Definition)
• This product can play back AVCHD format discs. These discs are normally recorded and used in
camcorders.
• The AVCHD format is a high definition digital video camera format.
• The MPEG-4 AVC/H.264 format compresses images with greater efficiency than the conventional
image compressing format.
• Some AVCHD discs use the “x.v.Color” format. This product can play back AVCHD discs that use
“x.v.Color” format.
• “x.v.Color” is a trademark of Sony Corporation.
• “AVCHD” and the AVCHD logo are trademarks of Matsushita Electronic Industrial Co., Ltd. and Sony
Corporation.
|
NOTE
|
\ Some AVCHD format discs may not play, depending on the recording conditions.
\ AVCHD format discs need to be finalized.
\ “x.v.Color” offers a wider color range than normal DVD camcorder discs.
\ Some MKV and MP4 format discs may not play, depending on their video resolution and frame rate.
|
10
English
Download from Www.Somanuals.com. All Manuals Search And Download.
Accessories
Check for the supplied accessories below.
FUNCTION
MUTE
VOLUME
-
+
2
5
8
0
1
3
6
4
7
9
DISC MENU
TITLE MENU
POPUP
Video Cable
FM Antenna
SUBTITLE
HOME
REPEAT
TOOLS
INFO
RETURN
A
EXIT
TUNER
MEMORY MO/ST
B
C
D
SOUND
TUNING
EFFECT
DOWN
UP
Remote Control/
Batteries (AAA size)
User Manual
`
Figures and illustrations in this User Manual are provided for reference only and may differ from actual
product appearance.
|
English
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
Front Panel
PLAY/PAUSE
STOP
ENTER
OPEN/CLOSE
VOLUME CONTROL
FUNCTION
DISPLAY
REMOTE CONTROL
SENSOR
DISC TRAY
USB HOST
POWER
|
NOTE
\ To upgrade the product's software through the USB Host jack, you must use a USB memory stick.
\ When the product displays the Blu-ray Disc menu, you cannot start the movie by pressing the
|
button on the product or
6
the remote. To play the movie, you must select Play Movie or Start in the disc menu, and then press the
button.
v
Rear Panel
AUX
IN
VIDEO
OUT
SPEAKERS OUT
LAN
FM ANT
CENTER
FRONT
FRONT
L
SURROUND
SURROUND
L
L
OPTICAL
SUBWOOFER
R
R
R
DIGITAL
HDMI OUT
AUDIO IN
COOLING FAN
AUX IN
VIDEO OUT
AUX
IN
VIDEO
OUT
SPEAKERS OUT
LAN
FM ANT
CENTER
FRONT
FRONT
L
SURROUND
SURROUND
L
L
OPTICAL
SUBWOOFER
R
R
R
DIGITAL
HDMI OUT
AUDIO IN
SPEAKER OUTPUT
CONNECTORS
LAN TERMINAL
HDMI OUT EXTERNAL DIGITAL FM ANTENNA
AUDIO IN (OPTICAL)
|
NOTE
|
\ Ensure a minimum of 10 cm of clear space on all sides of the home theater to ensure adequate ventilation.
Do not obstruct the cooling fan or ventilation holes.
|
12
English
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Control
Tour of the Remote Control
Turn the product on and off.
Press to select Blu-ray's mode.
(AUX, BD/DVD, etc.).
FUNCTION
MUTE
VOLUME
To open and close the disc tray.
-
Adjust the volume.
+
2
5
8
0
Cut off the sound temporarily.
1
3
6
Press numeric buttons to operate
options.
4
7
9
TITLE MENU
DISC MENU
Use to enter the Popup menu/
Title menu.
POPUP
Press to view the disc menu.
Press to skip backwards or forwards.
Press to search backwards or
forwards.
Press to play a disc.
Press to stop a disc.
Press to pause a disc.
SUBTITLE
HOME
REPEAT
Allows you to repeat a title,
chapter, track or disc.
Selects the disc subtitle language.
Press to move to the Home screen.
TOOLS
INFO
Use to display the playback
information when playing
a Blu-ray/DVD disc.
Press to use the Tools menu.
Select on-screen menu items and
change menu value.
RETURN
A
EXIT
Press to Exit the menu.
Return to the previous menu.
TUNER
MEMORY MO/ST
Use to set a preset radio frequency.
B
C
D
These buttons are used both for
menus on the product and also
several Blu-ray Disc functions.
SOUND
TUNING
Select MONO or STEREO for
radio broadcasts.
EFFECT
DOWN
UP
Select the desired Dolby Pro
Logic II audio mode.
Search for active FM stations and
to change channels.
Press to apply sound effects.
| NOTE |
Installing batteries in the Remote Control
\ Make sure to match the “+” and “–” ends of the batteries
with the diagram inside the compartment.
Battery size: AAA
\ Assuming typical TV usage, the batteries last for about
one year.
\ The remote control can be used up to approximately 23
feet (7 meters) from the product in a straight line.
|
English
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections
This section describes various methods of connecting the product to other external components.
Before moving or installing the product, be sure to turn off the power and disconnect the power cord.
Connecting the Speakers
Position of the product
Place it on a stand or cabinet shelf,
or under the TV stand.
Center
Subwoofer
Selecting the Listening Position
Front (R)
Surround (R)
The listening position should be
located about 2.5 to 3 times the
size of the TV's screen from the
TV. For example, if you have a 46
inch screen, locate the listening
position 2.92 to 3.50 meters from
the screen.
Product
Front (L)
Surround (L)
Place these speakers in front of your listening position, facing inwards (about 45°)
toward you. Place the front speakers so that their tweeters will be at the same
height as your ear. Align the front face of the front speakers with the front face of
the center speaker or place them slightly in front of the center speakers.
Front Speakers
Center Speaker
It is best to install the Center Speaker at the same height as the front speakers.
You can also install it directly over or under the TV.
Place these speakers to the side of your listening position. If there isn't enough
room, place these speakers so they face each other. Position them about 2 to
3 feet (60 to 90cm) above your ear, facing slightly downward.
Surround Speakers
Subwoofer
Unlike the front and center speakers, the surround speakers are used mainly
for sound effects. Sound will not come from them all the time.
*
The position of the subwoofer is not so critical. Place it anywhere you like.
Speaker Components
(L)
(R)
(L)
(R)
SUBWOOFER
FRONT
SURROUND
CENTER
|
14
English
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting The Speakers
1. Match the subwoofer cable bundle to the subwoofer by matching the
color coded plug on bundle to the colored sticker on the bottom of the
subwoofer.
2. To attach speaker wire to the subwoofer:
Black
Red
a. Press down the red tab on the back of the subwoofer, insert the red
wire, and then release the tab.
b. Press down the black tab on the back of the subwoofer, insert the
black wire, and then release the tab.
3. Connect the speaker wire plugs from each speaker to the back of the
product by matching the colors of the speaker plugs to the colors of the speaker jacks.
Front Speaker (L)
Center Speaker
Surround Speaker (L)
SPEAKERS OUT
SURROUND
Surround Speaker (R)
Front Speaker (R)
SURROUND
SPEAKERS OUT
LAN
Subwoofer
CENTER
FRONT
FRONT
L
SURROUND
SURROUND
L
SUBWOOFER
R
R
|
CAUTION
|
\
To mount your speakers on a wall, fix screws or nails on the desired wall securely and install the speaker using the stud hole on the rear
side. Note that screws or nails for wall-mounted installation is not provided with the product.
\
\
\
Do not let children play with or near the speakers. They could get hurt if a speaker falls.
When connecting the speaker wires to the speakers, make sure that the polarity (+/–) is correct.
Keep the subwoofer speaker out of reach of children to prevent children from inserting their hands or alien substances into the duct (hole)
of the subwoofer speaker.
\
Do not hang the subwoofer on the wall through the duct (hole).
|
NOTE
|
\
If you place a speaker near your TV set, the screen color may be distorted because of the magnetic field.
|
English
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections
Connecting to a TV
Select either Method 1 or Method 2.
AUX
IN
VIDEO
OUT
SPEAKERS OUT
LAN
CENTER
FRONT
FRONT
L
SURROUND
SURROUND
L
F
M
A
N
T
L
SUBWOOFER
R
R
OPTICAL
R
DIGITAL
H
D
M
I
O
U
T
A
U
D
I
O
I
N
(Cable not supplied.)
Method 1
Method 2
HDMI IN
VIDEO IN
Method 1 Connecting to a TV with an HDMI Cable - Best Quality (Recommended)
Connect an HDMI cable (not supplied) from the HDMI OUT jack on the back of the product to the HDMI IN
jack on your TV.
If the TV supports ARC, you can hear TV sound from home theater with only connect this cable.
Method 2 Connecting to a TV with an Video Cable - Good Quality
Connect the supplied Video cable from the VIDEO OUT jack on the back of the product to the VIDEO IN
jack on your TV.
|
NOTE
|
\ The VIDEO Out jack always outputs in the 576i/480i resolution regardless of the resolution set in the Setup menu.
\ Do not connect the unit through a VCR. Video signals fed through VCRs may be affected by copyright protection systems and
the picture will be distorted on the television.
|
16
English
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting to External Devices
To select the correct mode for an external device, press the FUNCTION button. Each time you press the
button, the mode changes in this order : BD/DVD ; D. IN ; AUX ; FM
SPEAKERS OUT
AUX
IN
VIDEO
OUT
LAN
CENTER
FRONT
FRONT
L
SURROUND
SURROUND
L
F
M
A
N
T
L
SUBWOOFER
R
R
OPTICAL
R
DIGITAL
H
D
M
I
O
U
T
A
U
D
I
O
I
N
(Cable not supplied.)
(Cable not supplied.)
Method 1
Method 2
Red
White
External Devices
R
OPTICAL OUT
W
Method 1 AUX IN : Connecting an External Analog Component
Using an RCA audio cable (not supplied), connect the AUDIO In jack on the product to the AUDIO Out
jack on the external analog component. Select the AUX mode.
• Be sure to match the colors on the cable plugs to the colors on the input and output jacks.
Method 2 OPTICAL : Connecting an External Digital Audio Component
To connect the digital audio output of digital signal components such as Cable Boxes and Satellite
Receivers (Set-Top-Boxes).
Using a digital optical cable (not supplied), connect the Optical Digital Audio In jack on the product to the
Digital Optical Out jack of the external digital device using a digital optical cable.
Select the D. IN mode.
|
NOTE
|
\ To see video from your Cable Box/Satellite receiver, you must connect its video output directly to your TV.
\ This system supports Digital sampling frequencies of 32 kHz or higher from external digital components.
\ This system supports only DTS and Dolby Digital audio. MPEG audio, a bitstream format, is not supported.
|
English
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections
Connecting the FM Antenna
FM Antenna (supplied)
I
FM ANT
1 . Connect the FM antenna supplied to the FM ANTENNA Jack.
2 . Slowly move the antenna wire around until you find a location where reception is good, then fasten it
to a wall or other rigid surface.
|
NOTE
|
\ This product does not receive AM broadcasts.
Connecting to a Network Router
You can connect your product to your network router using one of the methods illustrated below.
AUX
IN
VIDEO
OUT
SPEAKERS OUT
LAN
FM ANT
CENTER
FRONT
FRONT
L
SURROUND
SURROUND
L
L
OPTICAL
SUBWOOFER
R
R
R
DIGITAL
HDMI OUT
AUDIO IN
Broadband
modem
Broadband
service
Broadband
service
Or
Broadband modem
(with integrated router)
Router
|
NOTE
|
\ Internet access to Samsung’s software update server may not be allowed, depending on the router you use or your ISP’s
policy. For more information, contact your ISP (Internet Service Provider).
\ DSL users, please use a router to make a network connection.
\ For the AllShare function, a PC must be connected in the network as shown in the figure.
|
18
English
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings
format and expands 4:3 pictures to fill the
16:9 screen.
The Initial Settings Procedure
4:3 Letter Box - For older, standard screen
analog TVs. Displays 4:3 pictures in full
screen and 16:9 pictures in letter box format
that retains the 16:9 aspect ratio but puts
black bars above and below the picture.
4:3 Pan-Scan - For older, standard screen
analog TVs. Displays 4:3 pictures in full
screen and 16:9 pictures in Pan-Scan format
that fills the screen, but cuts off the left and
right sides of the picture and enlarges the
middle vertically.
• The Home menu will not appear if you do not configure
the initial settings.
• The OSD (On Screen Display) may change in this
product after you upgrade the software version.
• The access steps may differ depending on the menu
you selected.
1 . Turn on your TV after connecting the product,
and then turn on the product. When you turn
on the product for the first time, the product
automatically displays the Initial Settings
Language screen.
5 . The Network - Wired screen appears.
-
If you have a network with dynamic IP
addresses - and most people do - select
Auto, press the Enter button, and then go
to Step 6.
If you have a network with static IP addresses,
we suggest you select Skip by pressing the
BLUE (D) button, and then go to "Configuring
Your Network Connection" on page 24
after you have completed the initial setup.
"Configuring Your Network Connection"
provides a full explanation of how to configure
your network connection manually.
Initial Settings I On-Screen Language
Select a language for the on-screen displays.
English
-
Français
Deutsch
Español
Italiano
Nederlands
>
Move
s
Select
-
If you have no network, select Skip by
pressing the BLUE (D) button. The Initial
Settings Complete screen appears, and
then the Home screen appears.
2 . Press the ▲▼ buttons to select the desired
language, and then press the button.
v
3 . Press the
button to start function setup.
v
|
NOTE
|
Initial Settings
\ If you skip network setup here or the setup does not
work correctly, you can go to "Configuring Your Network
Connection" on page 24 to set up the product's network
connection later.
TV Aspect and Network will be set.
Each setting may be changed later under "Settings".
Start
Initial Settings I Network - Wired
Choose the method to configure Internet Protocol (IP).
Please make sure that the Ethernet cable is connected.
a
Previous
"
Select
Auto : Configure IP automatically.
4 . The TV Aspect screen appears. Press the ▲▼
Manual
Auto
buttons to select desired a TV Aspect ratio,
and then press the
button.
v
You have four choices:
a
Previous
d
Skip
<
Move
"
Select
16:9 Original - For widescreen TVs. Displays
widescreen pictures in their orignal 16:9
format and 4:3 pictures (the old, standard
format) in 4:3 pillar box format with black bars
on the left and right.
16:9 Full - For widescreen TVs. Displays
widescreen pictures in their orignal 16:9
6 . The product verifies the network connection
and then connects to the network. When it
is done, press the Enter button. The Initial
Settings Complete screen appears, and then
the Home screen appears.
|
English
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings
1 . To select an option on the Home screen,
move the cursor using the _+ buttons until it
highlights the option of your choice, and then
press the v button.
Initial Settings I Network - Wired
MAC Address (d0:66:7b:dc:28:fc)
IP Address, Subnet Mask, Gateway, DNS Server
Gateway Ping
Internet Service Test
|
NOTE
|
Your network is operating properly.
\
To play or view video, music, or photo files located on your
PC, you must connect your home theater and PC to a home
network and you must download, install, and configure the
AllShare software on your PC. (See page 27.)
If you still have a problem, contact your network service provider.
OK
"
Select
|
NOTE
|
Accessing the Settings Screen
\ If you want to display the Initial Setting screen again and
make changes, select the Reset option. (See page 24)
1 . Select Settings on the Home screen, and
then press
. The Settings screen appears.
v
\ If you use an HDMI cable to connect the product to an
Anynet+(HDMI-CEC)-compliant Samsung TV and 1.) You
have set the Anynet+(HDMI-CEC) feature to ON in both
the TV and the product and 2.) You have set the TV to a
language supported by the product, the product will select
that language as the preferred language automatically.
Settings
3D Settings
Display
Audio
►
TV Aspect Ratio
BD Wise
:
:
:
:
:
:
:
16:9 Original
On
Network
System
Language
Security
General
Support
Resolution
Auto
Movie Frame (24 Fs)
HDMI Color Format
HDMI Deep Color
Progressive Mode
Auto
Auto
Auto
The Home Screen
Auto
®
™
3
2 . To access the menus, sub-menus, and
options on the Settings screen, please refer
to the remote control illustration below.
4
Settings
2
1
|
NOTE
|
5
6
\
If you leave the product in the stop mode for more than 5
minutes without using it, a screen saver will appear on your
TV. If the product is left in the screen saver mode for more
than 20 minutes, the power will automatically turn off.
No Disc
a Change Device
d View Devices
Enter
"
Buttons on the Remote Control Used
for the Settings Menu
Videos. Play videos located on discs, USB devices,
or your PC.
1
Photos. View photos located on discs, USB devices,
SUBTITLE
HOME
REPEAT
2
3
4
5
6
or your PC.
1
TOOLS
INFO
Network Services. Select a network service:
Vudu, CinemaNow or YouTube.
3
4
Music. Play music located on discs, USB devices,
or your PC.
RETURN
EXIT
2
TUNER
Settings. Set various functions to suit your
personal preferences.
HOME Button : Press to move to the Home screen.
1
Displays the colored buttons on your remote that
you can press to access or perform functions.
RETURN ( ) Button : Return to the previous menu.
2
'
` Selecting an Option on the Home Screen
|
20
English
Download from Www.Somanuals.com. All Manuals Search And Download.
v (Enter) / DIRECTION Button :
~ Press $%_+ to move the cursor or select an item.
~ Press the v button to activate the currently selected item
or confirm a setting.
3
EXIT Button : Press to exit the current menu.
4
|
NOTE
|
\ The v button on the product's front panel can be used for same purpose as the v button on the remote control.
Detailed Function Information
Each Settings function, menu item, and individual option is explained in detail on-screen. To view an
explanation, use the $%_+ buttons to select the function, menu item, or option.
The explanation will usually appear the bottom of the screen. A short description of each Settings
function starts on this page. Additional informaton on some of the functions is also in the Appendix of
this manual.
Settings Menu Functions
Set up the 3D related functions.
Display
ꢀ 3D Blu-ray Playback Mode: Select whether to play a Blu-ray
Disc with 3D contents in 3D Mode. If you move to the Home
or Smart Hub Home menu while in 3D mode, the product will
switch to 2D automatically.
3D Settings
ꢀ Screen Size: Enter the size of the TV attached to the product.
The product will automatically adjust the 3D output to the screen
size of the TV.
TV Aspect
Ratio
Lets you adjust the output of the product to the screen size of your
TV. See page 19, Step 4 for a description of the screen size options.
BD Wise is Samsung’s latest inter-connectivity feature.
When you connect a Samsung product and a Samsung TV with
BD Wise to each other via HDMI, and BD Wise is on in both the
product and TV, the product outputs video at the video resolution
and frame rate of the Blu-ray/DVD Disc.
BD Wise
Lets you set the output resolution of the HDMI video signal
to Auto, 1080p, 1080i, 720p, 576p/480p. If Composite is
connected, the resolution supports only 576i/480i. The number
indicates the number of lines of video per frame. The i and p
indicate interlaced and progressive scan, respectively. The more
lines, the higher quality.
Resolution
Setting the Movie Frame (24 Fs) feature to Auto lets the product
adjust its HDMI output to 24 frames per second automatically for
improved picture quality if attached to a 24Fs compatible TV.
• You can enjoy the Movie Frame (24 Fs) feature only on a TV
supporting this frame rate.
Movie Frame
(24 Fs)
• Movie Frame is only available when the product is in the HDMI
1080i or 1080p output resolution modes.
|
English
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings
Lets you set the color space format for the HDMI output to
match the capabilities of the connected device (TV, monitor,
etc).
HDMI Color
Format
Lets you set the product to output video from the HDMI OUT
jack with Deep Color. Deep Color provides more accurate
color reproduction with greater color depth.
HDMI Deep
Color
Progressive
Mode
Lets you improve picture quality when viewing DVDs.
You can set the speaker options.
Audio
Speaker
Setting
Speaker
Selection
Lets you select which speakers you want active, either the
TV's speakers or the Home theatre's speakers.
Lets you direct the sound from the TV to the Home Theater
speakers. Requires an HDMI connection and an Audio Return
Channel (ARC) compatible TV.
• When Audio Return Channel is set to Auto, the home
theater automatically selects either ARC or optical input as
the audio source, depending on your connections. If Audio
Return Channel is active, optical input does not work.
Audio Return
Channel
Lets you set the Digital Output to match the capabilities of the
AV receiver you’ve connected to the product. For more details,
please refer to the digital output selection table. (See page 40)
Digital Output
Lets you apply dynamic range control to Dolby Digital, Dolby
Digital Plus, and Dolby True HD audio.
ꢀ
Auto
rueHD audio, based on information in the Dolby TrueHD
oundtrack. Also turns dynamic range control on for Dolby
igital and Dolby Digital Plus.
ff: Leaves the dynamic range uncompressed, letting you
ear the original sound.
n: Turns dynamic range control on for all three Dolby
ormats. Quieter sounds are made louder and the volume of
oud sounds is reduced.
:
Automatically controls the dynamic range of Dolby
T
s
Dynamic
Range Control
D
O
h
O
f
l
ꢀ
ꢀ
When the product is attached to a digital TV, lets you adjust
the audio delay so that the audio syncs with the video. You
can set the delay between 0 and 300 milliseconds.
Audio Sync
|
22
English
Download from Www.Somanuals.com. All Manuals Search And Download.
Wired Network
Settings
For more information about Network Settings and network
functions, see "Networks and the Internet" starting on page 24.
Network
Lets you test the Internet Protocol setup to see if it is working
correctly.
Network Test
Network
Status
Lets you check whether a connection to the network and the
Internet have been established.
BD-Live
Internet
Connection
Lets you allow or prohibit an Internet connection for the BD-Live
service.
Lets you re-run the Initial Settings procedure. See page 19 for
details.
System
Initial Settings
Anynet+ is a convenient function that offers linked operations
with other Samsung products that have the Anynet+ feature and
lets you control those products with one Samsung TV remote.
To operate this function, you must connect this product to an
Anynet+ Samsung TV using an HDMI cable.
Anynet+
(HDMI-CEC)
Lets you manage the contents you downloaded through a Blu-
ray disc that supports the BD-Live service. You can view the
information about the USB device you are using for BD Live
data storage including the storage space. You can also delete
BD Live data and change the device.
BD Data
Management
DivX® Video
On Demand
View DivX® VOD Registration Codes to purchase and play
DivX® VOD contents.
Language
Security
You can select the language you prefer for the On-Screen Menu, disc menu, etc.
• The selected language will only appear if it is supported on the disc.
The default PIN is 0000. Enter the default PIN to access the security function if
you haven't created your own PIN.
BD Parental
Rating
Prevents playback of Blu-ray Discs with a rating equal to or
above a specific age ratings unless the PIN is entered.
Prevents playback of DVDs with a rating above a specific
numerical ratings unless the PIN is entered.
DVD Parental
Rating
YouTube Lock
Change PIN
If the lock set to On, you must enter the PIN to use the service.
Change the 4-digit PIN used to access security functions.
General
Time Zone
You can specify the time zone that is applicable to your area.
|
English
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings
Support
Software
Upgrade
For more information about the Software Update function, see
"Upgrading Software" on page 26.
Contact
Samsung
Provides contact information for assistance with your product.
Terms of
Service
Agreement
View the general disclaimer regarding third party contents and
services.
All settings will revert to the default except for the network
settings. The default security password is 0000.
Reset
Networks and the Internet
Settings
Wired Network Settings
Display
When you connect this product to a network, you
can use network based applications and functions
such as BD-LIVE and upgrade the product's
software through the network connection.
Internet Protocol Setup : Auto
\
Audio
IP Address
Subnet Mask
Gateway
:
:
:
0
0
0
0
0
0
0
0
0
0
0
0
Netwo
System
Langua
Securit
Genera
Suppor
DNS
DNS Server
: Auto
:
0
0
0
0
Configuring Your Network Connection
>
Move
"
Select
Return
'
Before you begin, contact your ISP to find out
if your IP address is static or dynamic. If it is
dynamic, we recommend you use the Automatic
procedure below. If it is static, you must use the
Manual procedure that follows.
5 . The Network function acquires and fills in the
values for IP Address, Subnet Mask, etc.,
automatically.
6 . After the Network function has acquired the
• Before you begin, confirm that the product is
connected to your router with a network cable.
network values, press the RETURN (
)
'
button.
7 . Select Network Test, and then press
.
v
❑
Automatic
The home theater validates the network
connection. When it is done, press the
To start the configuration process, follow these
steps:
RETURN ( ) button.
'
1 . In the Home menu, select Settings, and then
press the
button.
v
2 . Select Network, and then press the
v
button.
3 . Select Wired Network Settings, and then
press the button.
v
The Wired Network Settings screen appears.
4 . Press the + button on the Internet Protocol
Setup menu.
Use $% button to select Auto and then
press the
button.
v
|
24
English
Download from Www.Somanuals.com. All Manuals Search And Download.
❑
< Getting the Network Settings Values >
Manual
You can view your Network Settings values on
most Windows computers. To view the Network
Settings values, follow these steps:
• Windows XP
If you have a static IP address or the Automatic
procedure does not work, you’ll need to set the
Network Settings values manually.
Settings
1 · Right click the Network icon on the bottom
Wired Network Settings
Display
right of the Windows desktop.
Internet Protocol Setup : Manual
\
Audio
IP Address
Subnet Mask
Gateway
:
:
:
0
0
0
0
0
0
Networ
System
Langua
2 · In the pop-up menu, click Status.
255 255 255
0
0
0
3 · On the dialog that appears, click the Support
Securit
Genera
Suppor
DNS
DNS Server
: Manual
tab.
:
0
0
0
0
4 · On the Support tab, click the Details button.
>
Move
"
Select
Return
'
The Network settings are displayed.
• Windows 7
1 . Follow the first four steps in the Automatic
procedure, but select Manual instead of Auto
in Step 4.
1 · Click the Network icon on the bottom right of
the Windows desktop.
2 · In the pop-up menu, click Network and
2 . Press the ▼ arrow button to go to the first
Sharing Center.
entry field (IP Address).
3 · On the dialog that appears, click the Local
3 . Use the number buttons on your remote to
Area Connection.
enter numbers.
4 · On the Support tab, click the Details button.
4 . When done with each field, use the ► button
to move successively to the next field.
You can also use the other arrow buttons to
move up, down, and back.
The Network settings are displayed.
|
NOTE
|
\ Depending on your Windows version, the information may
differ.
5 . Enter the IP Address, Subnet Mask, and
Gateway values.
6 . Press the ▼ button to go to DNS.
7 . Press the ▼ button to go to the first DNS
entry field. Enter the numbers as above.
8 . Press the RETURN ( ) button on your
'
remote.
9 . Select Network Status, and then press
10 . The Network Status screen appears.
.
v
The product verifies the network connection
and then connects to the network. When it is
done, highlight OK, and then press
.
v
|
NOTE
|
\ You can get the Network values from your Internet
provider. You can also view these values on most Windows
computers. For instructions, see "Getting the Network
Setting Values" on this page.
|
English
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings
3 · The update progress popup appears. When
the update is completed, the product turns
off automatically again.
Upgrading Software
The Software Upgrade menu allows you to
upgrade the product’s software for performance
improvements or additional services.
4 · Press the POWER button to turn on the
product.
|
NOTE
|
• Never turn the product off or back on manually during
\ The update is complete when the product turns off
after restarting. Press the POWER button to turn on the
updated product for your use.
the update process.
1 · In the Home menu, select Settings, and then
\ Never turn the product off or on manually during the
press the
button.
v
update process.
2 · Select Support, and then press the
v
\
Samsung Electronics takes no legal responsibility for
a product malfunction caused by an unstable internet
connection or consumer negligence during software upgrade.
button.
3 · Select Software Upgrade, and then press
the button.
v
By USB
4 · Select one of the following methods:
• By Online
• By USB
2 · Click SUPPORT on the top right of the page.
3 · Enter the product's model number into the
• Auto Upgrade Notification
search field, and then click Find Product.
5 · Press the
button.
v
4 · Click Get downloads in the center of the
Directions for each method begin below.
page below the Downloads header.
|
NOTE
|
5 · Click Firmware in the center of the page.
\ The update is complete when the product turns off
after restarting. Press the POWER button to turn on the
updated product for your use. Never turn the product on
or off manually during the update process.
6 · Click the ZIP icon in the File column on the
right side of the page.
7 · Click OK in the pop-up that appears to
download and save the firmware file to your PC.
\
Samsung Electronics takes no legal responsibility for product
malfunction caused by an unstable Internet connection or
consumer negligence during a Software Update.
8 · Unzip the zip archive to your computer. You
should have a single folder with the same
name as the zip file.
\ If you want to cancel the upgrade while the upgrade
9 · Copy the folder to a USB flash drive.
software is downloading, press the
button.
v
10 · Make sure no disc is inserted in the product,
and then insert the USB flash drive into the
USB port of the product.
By Online
Your product must be connected to the Internet
to use the By Online function. Remove all discs
before you begin.
11 · In the product’s menu, go to Settings >
Support > Software Upgrade.
12 · Select By USB.
1 · Select By Online, and then press the
v
|
NOTE
|
button. The Connecting to Server message
\ There should be no disc in the product when you upgrade
appears.
the software using the USB Host jack.
2 · If an update is available, a popup message
appears asking if you want to upgrade.
If you select Yes, the product turns off
automatically, turns on, and then begins the
upgrade.
\ Never turn the product off or on manually during the
update process.
\ When the Software Update is done, check the software
details in the Software Upgrade menu.
|
IMPORTANT
|
\ Never turn the home theater on or off manually during a
software upgrade.
|
26
English
Download from Www.Somanuals.com. All Manuals Search And Download.
Auto Upgrade Notification
Setting Up AllShare
If your product is connected to the network and
you set Auto Upgrade Notification on, the product
will notify you if a new software version is available
with a pop-up message.
AllShare enables you to play music, video and
photo files in your PC using the product. To use
AllShare, you must connect the product to your
PC via the network (See page 18) and install the
SAMSUNG PC Share Manager on the PC.
1 · Turn on the product.
2 · In the Software Update menu, set Auto
Upgrade Notification to On.
To Download the AllShare Software
If there is a new software version available,
the product will notify you with a pop-up
message.
To use AllShare with your PC, you must install
AllShare software on your PC. You can download
the PC software and get detailed instructions for
using AllShare from the Samsung.com website.
3 · To upgrade the firmware, select Yes. The
product turns off automatically, turns on, and
then begins the upgrade.
2 · Click SUPPORT at the top of the page.
4 · The update progress popup will appear. When
the update is complete, the product will turn
off automatically again.
3 · On the Support page, enter the model
number of your player into the Model
Number field, and then press the
button.
v
5 · Press the POWER button to turn on the
4 · On the page that appears, click Get
product.
downloads on the left side under
Downloads. The Download Center appears.
|
NOTE
|
5 · On the Download Center page, click the
\ The update is complete when the product turns off
after restarting. Press the POWER button to turn on the
updated product for your use. Never turn the product on
or off manually during the update process.
Software tab.
6 · On the software tab, click the File icon on the
right side of the AllShare line.
7 · In the pop-up that appears, click Save File.
\ Samsung Electronics shall take no legal responsibility
for product malfunction caused by unstable of internet
connection or consumer negligence during Software
Update.
8 · Find the AllShare install file on your disk, and
then double click the file.
9 · In the pop-up that appears, click Run, and
then follow the directions that appear on your
screen.
Download the AllShare Installation/Instruction
manual from the same Software Tab by clicking
the corresponding PDF file symbol in the File
column on the right. The file, in PDF format, will
download and open. Follow the directions to
install and setup AllShare. You can view and/or
save the file.
|
NOTE
|
\ To use allshare with your smartphone, you need to
connect your set & smartphone to the same router.
|
English
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Media Play
8 · Use the ▲▼ buttons to select a file to play or
view, and then press the button.
Using the Streaming Media Services
v
OR
• To use the Streaming Media Services, your home
theater must be connected to the Internet. You also
may need a vendor account for some services.
4-1. Press the BLUE (D) button.
Use the $%_+ buttons in the Home menu to
™
move to the desired service, and then press the
button.
v
USB DISK
YouTube. You can view video streamed by
YouTube.
™
USB DISK
d HOME " Enter
Playing Files on a USB Device
5-1. Press the ◄► buttons to select the USB
Flash Mem or Disk then press the button.
You can play multimedia files located on a
connected USB device.
v
6-1. Press the ▲▼ buttons to select Videos,
Music or Photos, then press the
button.
v
1 · Move to the Home menu.
7-1. If files appear on the screen go to Step 8-1.
2 · In Stop mode, connect the USB storage
device to the USB port on the front panel of
the product. The message “Do you want to
access the device?” will be displayed.
If file folders appear on the screen, use the
▲▼ buttons to select a folder, press
, and
v
then go to Step 8-1.
8-1. Use the ▲▼ buttons to select a file to play or
3 · Press the ◄► button to select Yes, then
view, and then press the
button.
v
press the
button.
v
|
NOTE
|
4 · Press the RED (A) button.
\ To prevent possible damage to the USB memory, you
must remove the USB storage device safely using the
“Safely Remove USB” function. Press the HOME button
to move to the Home menu, select the YELLOW (C)
™
button, and then press the
button.
v
\ To listen to your music files with 5.1 channel sound, you
must set the Dolby Pro Logic II mode to MATRIX.
(See page 34)
CD
USB DISK
USB DISK a Change Device
c Safely Remove USB d View Devices " Enter
5 · Press the ▲▼ buttons to select the USB
Flash Mem or Disk then press the
button.
v
6 · Press the ◄► buttons to select Videos,
Music or Photos, then press the button.
v
7 · If files appear on the screen go to Step 8. If
file folders appear on the screen, use the ▲▼
buttons to select a folder, press
then go to Step 8.
, and
v
|
28
English
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing a Disc with User
Recorded Content
Playing a Commercial Video Disc
Place a disc into the disc tray with the disc’s label
facing up and then close the disc tray. Playback
starts automatically. If it does not playback
You can play mulitmedia files you have recorded
on DVD or CD discs.
automatically, move to Videos in the Home menu
1 · Turn on the home theater.
and press the
button.
v
2 · Open the disc tray, place a user recorded disc
into the disc tray with the disc’s label facing
up, and then close the tray.
In most cases, commercial videos will display a
disc menu. To play the movie on the disc, select
Play on the disc menu, and then press
.
v
3 · After the disc loads, press the RED (A)
button.
|
NOTE
|
4 · Press the ▲▼ buttons to select CD or DVD,
\
For more information about playing videos, go to "Controlling
Video Playback" on page 30.
and then press the
button.
v
5 · Press the ◄► buttons to select Videos,
Music, or Photos, then press the button.
v
Playing a Pre-Recorded
Commercial Audio Disc
6 · If files appear on the screen, go to Step 7. If
file folders appear on the screen, use the ▲▼
◄► buttons to select a folder, press
and then go to Step 7.
,
v
1 · Insert an Audio CD (CD-DA) or an MP3 Disc into
the disc tray.
7 · Use the ▲▼ ◄► buttons to select a file to
play or view, and then press the button.
• For an Audio CD (CD-DA), the first track will
be played automatically. Tracks on a disc
are played in the order in which they were
recorded on the disc.
v
OR
3-1. After the disc loads, press the BLUE (D)
•
For an MP3 disc, press the ◄► buttons to
button.
select Music, then press the
button.
v
4-1. Press the ◄► buttons to select CD or DVD,
Playlist
1/1
and then press the
button.
v
TRACK 001
TRACK 002
TRACK 003
TRACK 004
TRACK 005
TRACK 006
04:27
04:07
03:41
03:17
03:35
5-1. Press the ▲▼ buttons to select Videos,
Music or Photos, and then press the
button.
v
6-1. If files appear on the screen go to Step 7-1. If
+
00:08 / 05:57
file folders appear on the screen, use the ▲▼
▲▼ buttons to select a folder, press
, and
v
then go to Step 7-1.
s
Pause
Tools
Return
'
7-1. Use the ▲▼ ▲▼ buttons to select a file to
play or view, and then press the button.
2 · To play a particular track, use the ▲▼ buttons
v
on the remote to select the track, and then
press the
button.
v
|
NOTE
|
\
For more information about playing music, go to "Controlling
Music Playback" on page 32.
|
English
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Media Play
Controlling Video Playback
You can control the playback of video files located on Blu-ray, DVD, and CD discs, and on USB storage
devices. Depending on the media, some of the functions described in this manual may not be available.
Buttons on the Remote Control used for Video Playback
DISC MENU
TITLE MENU
„
Using the disc menu, title menu, popup
menu and title list
POPUP
0
DISC
MENU
During playback, press this button to
display the Disc menu.
SUBTITLE
HOME
REPEAT
During playback, press this button to
display the Title menu.
• If your disc has a playlist, press
the GREEN (B) button to go to the
playlist.
TOOLS
INFO
TITLE
MENU
„
Playback related buttons
The product does not play sound in Search, Slow,
or Step mode.
POPUP
MENU
During playback, press this button to
display the Pop-up menu.
Starts playback.
Stops playback.
Pauses playback.
6
5
7
DISC
MENU
or TITLE
MENU
During playback, press this button to
display the title list.
During playback, press the 3 or 4
button.
Each time you press the 3 or 4
button, the playback speed will change.
Fast
Motion
Play
Slow
Motion
Play
In pause mode, press the 4 button.
Each time you press the 4 button,
the playback speed will change.
Step
Motion
Play
In pause mode, press the 7 button.
Each time you press the 7 button, a
new frame appears.
During playback, press the 1 or 2
button.
Each time you press 1 or 2 button,
the disc moves to the previous or next
chapter or file.
Skip
Motion
Play
|
30
English
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu that appears only when a BD/DVD
disc plays
Using the TOOLS Menu
During playback, press the TOOLS button.
Select to move to a chapter that you
Chapter
If the movie or video have more than
one title, move to or select a desired
title.
desire to watch.
Title
Select to repeat a specific title, chapter
Repeat
(BD/DVD discs only) or marked section.
Select to move to the specific playback
point. Use the numeric buttons to input
the playback point.
Select to set the desired audio
language.
- You can also operate this function
by pressing the AUDIO button on the
remote control.
Playing Time
Full Screen
Audio
Select to set the desired full screen
size. You can select Original, Mode1
(larger), and Mode2 (largest).
Select to set the desired subtitle
language.
- You can also operate this function
by pressing the SUBTITLE button on
the remote control.
Select to set the picture mode.
- Picture Mode
▪ Normal : Choose this setting for
most viewing applications.
▪ Movie : This is the best setting
for watching movies.
▪ User : Lets you adjust the
sharpness and noise reduction
function respectively.
Subtitle
Angle
To view a scene from another angle.
The Angle option displays the number
of angles available to view (1/1, 1/2,
1/3, etc.).
Picture Setting
BONUSVIEW
Video /
▪ Dynamic : Choose this setting to
increase Sharpness.
Select to set the desired bonusview
option.
BONUSVIEW
Audio
(
BD discs only)
| NOTE |
\ Depending on the disc or storage device, the Tools menu
may differ. All options may not be displayed.
Creating a Video Playlist
You can create a playlist of video files in a way that
is nearly identical to the way you create a playlist
of music files. For instructions, see "Creating a
Music Playlist" on page 32.
|
English
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Media Play
Creating a Music Playlist
Controlling Music Playback
1 · If playing music from a commercial CD or
You can control the playback of music content
located on DVDs, CDs, and USB storage devices.
DVD, press the
5
or RETURN ( ) button.
'
The Music List Screen appears. If you are
creating a playlist from music on a user
created disk or USB device, access the
Music list as described in "Playing Files on a
USB Device" on page 28 or "Playing a Disc
with User Recorded Content" on page 29.
Buttons on the Remote Control used
for Music Playback
1
4
2
5
8
0
3
6
6
2 · Press the ▲▼◄► buttons to move to the
desired file, and then press the YELLOW (C)
button to select it. Repeat this procedure to
select additional files.
7
9
DISC MENU
TITLE MENU
POPUP
1
5
4
2
3
Music TRACK 002
2 files selected 1/2 Page
SUBTITLE
HOME
REPEAT
TRACK 001
00:05:57
TRACK 003
00:04:07
00:03:41
Fast Play (Audio CD (CD-DA) only)
TRACK 005
00:03:17
TRACK 006
00:03:35
During playback, press the 3 or 4 button.
Each time you press the 3 or 4 button, the
playback speed will change.
TRACK 007
00:03:47
TRACK 008
00:03:49
1
TRACK 009
00:03:53
TRACK 010
00:03:45
CD
c
Select () Jump page
Return
'
7
6
5
button : Pause a track.
2
3
4
button : Plays the currently selected track.
button : Stops a track.
3 · To remove a file from the Playlist, move to the
file, and then press the YELLOW(C) Button.
4 · Press the
button to play the selected files.
v
Skip : During playback, press the 1 or 2 button
to move to the previous or next music of listed.
The Playlist screen appears.
5
6
5 · To go to the Music List, press the
5
or
NUMBER buttons : During Playlist playback, press
the desired track number. The selected track is
played.
RETURN ( ) button.
'
6 · To go back to the Playlist, press the
v
button.
| NOTE |
Repeating Tracks
\ You can create a playlist with up to 99 tracks
on Audio CDs (CD-DA).
You can set the product to repeat tracks.
1 · During the music playback, press the TOOLS
\ If you go to the Music List from the Playlist, and
then return to the Playlist, the Playlist will start
playing again from the beginning.
button.
2 · Use _+ button to select Off, Track or One,
All or Shuffle in Repeat Mode, and then
press the
button.
v
|
32
English
Download from Www.Somanuals.com. All Manuals Search And Download.
Controlling Photo Playback
Listening to Radio
You can control the playback of photos located on
DVDs, CDs, and USB storage devices.
Using Buttons on the Remote Control
1 · Press the FUNCTION button to select FM.
2 · Tune in to the desired station.
Using the Tools Menu
During playback, press the TOOLS button.
• Preset Tuning 1 : Press the 5 button
to select PRESET and then press the
TUNING (UP, DOWN) button to select the
preset station.
- Before you can tune to preset stations,
you must add preset stations to the
product's memory.
• Manual Tuning : Press the 5 button
to select MANUAL and then press the
TUNING (UP, DOWN) button to tune in to a
lower or higher frequency.
Start Slide
Select to start a slide show.
Show
Slide Show
Speed
Select to adjust the slide show speed.
Background
Music
Select to listen to music while viewing
a slide show.
Select to enlarge the current picture.
(Enlarge up to 4 times)
Zoom
• Automatic Tuning : Press the 5 button
to select MANUAL and then press and
hold the TUNING (UP, DOWN) button to
automatically search the band.
Select to rotate a picture.
(This will rotate the picture either
clockwise or counter clockwise.)
Rotate
Shows the picture information including
the name and size, etc.
Information
Setting Mono/Stereo
Press the MO/ST button.
• Each time the button is pressed, the sound
switches between STEREO and MONO.
• In a poor reception area, select MONO for a
clear, interference-free broadcast.
| NOTE |
\ Depending on the disc or storage device, the Tools menu
may differ. All options may not be displayed.
\ To enable the background music function, the photo file
must be in the same storage media as the music file.
However, the sound quality can be affected by the bitrate
of the MP3 file, the size of the photo, and the encoding
method.
Presetting Stations
Example : Presetting FM 89.10 into memory.
1 · Press the FUNCTION button to select FM.
Creating a Photo Playlist
2 · Press the TUNING (UP, DOWN) button to
select <89.10>.
You can create a playlist of photos in a way that is
nearly identical to the way you create a playlist of
music files. For instructions, see "Creating a Music
Playlist" on page 32.
3 · Press the TUNER MEMORY button.
• NUMBER flashes on the display.
4 · Press the TUNER MEMORY button again.
• Press the TUNER MEMORY button before
NUMBER disappears from the display on its
own.
• After you press the TUNER MEMORY
button, NUMBER disappears from the
display and the station is stored in memory.
5 · To preset another station, repeat steps 2 to 4.
• To tune in to a preset station, press the
TUNING (UP, DOWN) button.
|
English
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Media Play
Using the Special Effects Remote
Control Buttons
Using BD-LIVE™
1 · Connect the product to the network.
(See page 18)
SOUND
2 · Configure the network settings.
SOUND EFFECT Function
EFFECT
(See pages 24~25)
Once the product is connected to your network,
you can enjoy various movie-related service
contents available on BD-LIVE compliant discs.
Lets you select a mode that optimizes the sound.
MP3 ENHANCER SMART VOLUME POWER
BASS OFF
1 · Attach a USB memory stick to the USB jack
on the front of the product, and then use BD
Data Management to check its remaining
memory. The memory device must have at
least 1GB of free space to accommodate the
BD-LIVE services.
• MP3 ENHANCER : Helps enhance your sound
experience (ex. mp3 music). You can upscale your
MP3 level sound (24 kHz, 8bit) to CD level sound
(44.1 kHz, 16bit).
• SMART VOLUME : Regulates and stabilizes the
volume level, preventing drastic volume changes
when you change channels or during scene
transitions.
2 · Select Settings on the Home screen, and
then press the
button.
v
3 · Select System, and then press the
v
• POWER BASS : Increases the volume level of bass
tones and provides thudding sound effects.
button.
4 · Select BD Data management, and then
press the button.
• OFF : Select this for normal listening.
v
5 · Select Change Device, and then press the
button.
v
Dolby Pro Logic II Function
6 · Select USB DISK, and then press the
v
button.
7 · Insert a Blu-ray Disc that supports BD-LIVE.
You can select the desired Dolby Pro Logic II audio
mode.
8 · Select an item from the list of BD-LIVE service
contents provided by the disc manufacturer.
• MOVIE : Adds realism to a movie soundtrack.
| NOTE |
• MUSIC : When listening to music, you can experience
sound effects as if you are listening to the actual
performance.
\ The way you use BD-LIVE and the provided contents may
differ, depending on the disc manufacturer.
• MATRIX : Select to hear multi channel surround
sound.
• PROLOG : Select to listen to a 2CH sound source in
5.1CH surround sound with all speakers active.
- A specific speaker(s) may not output depending on
the input signal.
|
34
English
Download from Www.Somanuals.com. All Manuals Search And Download.
Using AllShare
AllShare lets you access and play files located on
your PC through your home theater.
Follow the directions in the AllShare user's guide
to setup AllShare on your PC and to tag folders
and files you want to share with the home theater.
To access and play files located on your PC after
you have setup AllShare, follow these steps:
1 · Turn on your PC, your TV, and the home
theater.
2 · Make sure the AllShare Shared server is
running on your PC.
3 · On your home theater, press the BLUE (D)
button (View Devices).
4 · Use the left or right arrow button to select
your PC in the Device List.
5 · Select the kind of file you want to view or play,
Videos, Photos, or Music, and then press
.
v
6 · Use the _+ button to select the folder with
the kind of files you selected, and then press
. The File List is displayed.
v
7 · Select the file you want to view or play, and
then press
.
v
| NOTE |
\ You can create Playlists from files on your PC in the same
way you create playlists from files on USB devices and
discs.
\ With a few exceptions, you can control the playback
of files on your PC in the same fashion you control the
playback of files on USB devices and discs.
\ You can also access files on you PC by first selecting
Videos, Photos, or Music on the Home screen, and then
selecting your PC from the device list that appears.
|
English
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
Additional Information
Note
HDMI OUT
• Certain HDMI output resolutions may not work, depending on your TV.
• You must have an HDMI connection to enjoy videos with 3D technology.
Connections
• A long HDMI cable may cause screen noise. If this occurs, set HDMI Deep Color to Off in the
menu.
3D Settings
• For some 3D discs, to stop a movie during 3D playback, press the 5 button once. The movie
stops and the 3D mode option is de-activated.
To change a 3D option selection when you are playing a 3D movie, press the 5 button once.
The Blu-ray menu appears. Press the 5 button again, then select 3D Settings in the Blu-ray
menu.
• Depending on the content and the position of the picture on your TV screen, you may see vertical
black bars on the left side, right side, or both sides.
TV Aspect
• Depending on the disc type, some aspect ratios may not be available.
• If you select an aspect ratio and option which is different than the aspect ratio of your TV screen,
then the picture might appear to be distorted.
• If you select the 16:9 Original, your TV may display 4:3 Pillarbox (black bars on sides of
picture).
BD Wise (Samsung Products only)
• When BD Wise is on, the Resolution setting automatically defaults to BD Wise and BD Wise
appears in the Resolution menu.
Settings
• If the product is connected to a device that does not support BD Wise, you can not use the BD
Wise function.
•
For proper operation of BD Wise, set the BD Wise option in both the product and the TV to On.
Digital Output
• Be sure to select the correct Digital Output or you will hear no sound or just loud noise.
• If the HDMI device (AV receiver, TV) is not compatible with compressed formats (Dolby digital,
DTS), the audio signal outputs as PCM.
• Regular DVDs do not have BONUSVIEW audio and Navigation Sound Effects.
• Some Blu-ray Discs do not have BONUSVIEW audio and Navigation Sound Effects.
• This Digital Output setup does not affect the analog (L/R) audio or HDMI audio output to your TV.
It affects the optical and HDMI audio output when your product is connected to an AV receiver.
• If you play MPEG audio soundtracks, the audio signal outputs as PCM regardless of your Digital
Output selections (PCM or Bitstream).
BD-LIVE Internet Connection
• The Internet connection may be restricted while you are using BD-LIVE contents.
|
36
English
Download from Www.Somanuals.com. All Manuals Search And Download.
Anynet+(HDMI-CEC)
• Depending on your TV, certain HDMI output resolutions may not work. Please refer to the user
manual of your TV.
• This function is not available if the HDMI cable does not support CEC.
• If your Samsung TV has an Anynet+ logo, then it supports the Anynet+ function.
BD Data Management
• In the external memory mode, disc playback may be stopped if you disconnect the USB device in
the middle of playback.
• Only those USB devices formatted in the FAT file system (DOS 8.3 volume label) are supported.
We recommend you use USB devices that support USB 2.0 protocol with 4 MB/sec or faster
read/write speed.
• The Resume Play function may not work after you format the storage device.
• The total memory available to BD Data Management may differ, depending on the conditions.
Settings
Speaker Settings
• When Speaker Selection is set to TV Speaker, audio is produced through the TV speakers.
HDMI audio
• When HDMI audio is outputted to the TV speaker, it is automatically down-mixed to 2 channels.
Audio Return Channel
• When Anynet+ (HDMI-CEC) is Off, the Audio Return Channel function is not available.
• Using an HDMI cable not certified for ARC (Audio Return Channel) may cause a compatibility
problem.
• The ARC function is only available if an ARC-compliant TV is connected.
Digital Output
• Digital Output can be activated when Speaker Selection is selected to TV Speaker.
Playing a Video files
• Video files with high bitrates of 20Mbps or more strain the product’s capabilities and may stop
playing during playback.
Selecting the Audio Language
Playback
• The ◄► indicator will not appear on the screen if the BONUSVIEW section does not contain any
BONUSVIEW audio settings.
• The languages available through the Audio Language function depend on the languages that are
encoded on the disc. This function or certain languages may not be available.
• Some Blu-ray Discs may allow you to select either the PCM or Dolby digital audio soundtrack in
English.
|
English
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
Selecting the Subtitle Language
• Depending on the Blu-ray Disc / DVD, you may be able to change the subtitle language in the
Disc Menu. Press the DISC MENU button.
• This function depends on the selection of subtitles that are encoded on the disc and may not be
available on all Blu-ray Discs/DVDs.
• Information about the main feature BONUSVIEW mode will also appear if the Blu-ray Disc has a
BONUSVIEW section.
Playback
• This function changes both the primary and secondary subtitles at the same time.
• The total number of primary and secondary subtitles are displayed respectively.
Playing a JPEG files
• You can’t enlarge the subtitle and PG graphic in the full screen mode.
Dolby Pro Logic II Mode
• Before selecting Dolby Pro Logic II mode, connect your external device to the AUDIO INPUT jacks
(L and R) on the product. If you connect to only one of the inputs (L or R), you cannot listen to
surround sound.
Using the TOOLS button while playing pictures
• If the system is connected to a BD Wise compliant TV that has set BD Wise to On, the Picture
Settings menu will not appear.
• The Background Music function will not work unless the music file and the photo file are located
on the same storage media. Also, sound quality can be impacted by the bitrate of the MP3 music
file, the size of the photos, and the encoding method.
Allshare Play
Playing back a USB Storage Device
• You must remove the USB storage device safely (by performing the “Safely Remove USB”
function) to prevent possible damage to the USB memory. Press the HOME button to move to the
Home menu, select the YELLOW (C) button, and then press the
button.
v
• If you insert a disc when playing a USB storage device, the Function mode is changed to
“BD/DVD” automatically.
|
38
English
Download from Www.Somanuals.com. All Manuals Search And Download.
Resolution according to the output mode
❑
Blu-ray Disc/E-contents/Digital Contents playback
HDMI/not
HDMI/connected
HDMI Mode
connected
Output
Setup
VIDEO
Mode
VIDEO Mode
E-contents/
Digital contents
Blu-ray Disc
BD Wise
Auto
Resolution of Blu-ray Disc
1080p@60F
576i/480i
576i/480i
576i/480i
576i/480i
576i/480i
576i/480i
576i/480i
-
-
Max. Resolution of TV input
Max. Resolution of TV input
-
1080p@60F
Movie Frame : Auto (24Fs)
1080i
1080p@60F
1080p@24F
1080i
1080p@60F
1080p@24F
1080i
-
-
576i/480i
576i/480i
576i/480i
576i/480i
720p
720p
720p
576p/480p
576p/480p
-
576p/480p
-
576i/480i
❑
DVD playback
HDMI/connected
HDMI/not connected
Output
Setup
HDMI Mode
VIDEO Mode
576i/480i
576i/480i
576i/480i
576i/480i
576i/480i
576i/480i
-
VIDEO Mode
BD Wise
Auto
576i/480i
-
Max. Resolution of TV input
-
1080p@60F
1080i
1080p@60F
1080i
-
576i/480i
576i/480i
576i/480i
576i/480i
720p
720p
576p/480p
576i/480i
576p/480p
-
|
English
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
Digital Output Selection
Bitstream
(Re-encoded
DTS)
Bitstream
(Re-encoded
Dolby D)
Bitstream
(Unprocessed)
Setup
PCM
HDMI
supported AV
receiver
HDMI supported AV
receiver
HDMI supported AV
receiver
HDMI supported
AV receiver
Connection
Re-encoded
Dolby Digital *
PCM
Up to PCM 7.1ch
Up to PCM 7.1ch
Up to PCM 7.1ch
Up to PCM 7.1ch
Up to PCM 6.1ch
PCM
Dolby Digital
Dolby Digital Plus
Dolby TrueHD
DTS
DTS re-encoded
DTS re-encoded
DTS re-encoded
DTS re-encoded
DTS re-encoded
Re-encoded
Dolby Digital *
Dolby Digital
Dolby Digital
Plus
Re-encoded
Dolby Digital *
Audio Stream
on Blu-ray
Disc
Re-encoded
Dolby Digital *
Dolby TrueHD
DTS
Re-encoded
Dolby Digital *
DTS-HD High
Resolution
Audio
DTS-HD High Resolution
Audio
Re-encoded
Dolby Digital *
Up to PCM 7.1ch
DTS re-encoded
DTS-HD
Master Audio
Re-encoded
Dolby Digital *
Up to PCM 7.1ch
DTS-HD Master Audio
DTS re-encoded
PCM
Dolby Digital
DTS
PCM 2ch
PCM 2ch
Dolby Digital
DTS
PCM 2ch
Dolby Digital
DTS
PCM 2ch
Dolby Digital
DTS
Audio Stream
on DVD
Up to PCM 5.1ch
Up to PCM 6.1ch
Decodes the main
feature audio and
BONUSVIEW audio
stream together
into PCM audio and
adds Navigation
Sound Effects, then
re-encodes the PCM
audio into Dolby
digital bitstream or
PCM.
Decodes the main
feature audio and
BONUSVIEW audio
stream together
into PCM audio and
adds Navigation
Sound Effects, then
re-encodes the
Outputs only the main
Decodes the main feature feature audio stream so that
audio and BONUSVIEW your AV receiver can decode
audio stream together
into PCM audio and adds
Navigation Sound Effects.
Definition for
Blu-ray Disc
Any
the audio bitstream.
You will not hear
BONUSVIEW audio or
Navigation Sound Effects.
PCM audio into DTS
bitstream.
* If the Source Stream is 2ch or mono, “Re-encoded Dolby D” Setting are not applied. Output will be
PCM 2ch.
Blu-ray Discs may include three audio streams :
- Main Feature Audio : The audio soundtrack of the main feature.
- BONUSVIEW audio : An additional soundtrack such as the director or actor’s commentary.
- Navigation Sound Effects: Sound effects that occur when you navigate the disc’s or movie’s menu.
Navigation Sound Effects are different on each Blu-ray disc.
|
40
English
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Refer to the table below when this product does not function properly. If the problem you are
experiencing is not listed below or if the instructions below do not help, turn off the product, disconnect
the power cord and contact the nearest authorized dealer or Samsung Electronics Service Centre.
Symptom
Check/Remedy
• Is the power cord plugged securely into the outlet?
• Turn off the power and then turn it back on.
I cannot eject the disc.
• Check the region number of the Blu-ray/DVD disc.
A Blu-ray/DVD disc purchased from abroad may not be playable.
• CD-ROMs and DVD-ROMs cannot be played on this product.
Playback does not start.
• Make sure that the rating level is correct.
Playback does not start
immediately when the
Play/Pause button is
pressed.
• Are you using a deformed disc or a disc with scratches on the surface?
• Wipe the disc clean.
Sound is not produced.
•
•
The home theater does not play sound during fast playback, slow playback, and step motion
playback.
Are the speakers connected properly? Is the speaker setup correctly customized?
• Is the disc severely damaged?
Sound can be heard only
from a few speakers and not
all 6.
• On certain Blu-ray/DVD discs, sound is output from the front speakers only.
• Check if the speakers are connected properly.
• Adjust the volume.
• When listening to a CD, radio or TV, sound is output to the front speakers only.
Dolby Digital 5.1 CH
Surround Sound is not
produced.
• Is there "Dolby Digital 5.1 CH" mark on the disc? Dolby Digital 5.1 CH Surround Sound is
produced only if the disc is recorded with 5.1 channel sound.
• Is the audio language correctly set to Dolby Digital 5.1-CH in the information display?
The remote control does not
work.
•
•
Are you operating the remote within its operational range and within the proper angle relative to
the sensor?
Are the batteries drained?
• The disc is rotating but no
picture is produced.
• Is the TV power on?
• Are the video cables connected properly?
• Is the disc dirty or damaged?
• Picture quality is poor and
picture is shaking.
• A poorly manufactured disc may not be playable.
Audio language and subtitles
do not work.
•
Audio language and subtitles will not work if the disc does not contain them.
The menu screen does not
appear even when the menu
function is selected.
• Are you using a disc that does not contain menus?
|
English
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
Symptom
Check/Remedy
• You can play 16:9 Blu-ray/DVD discs in 16:9 Full mode, 4:3 Letter Box mode, or
4:3 Pan-Scan mode, but 4:3 Blu-ray/DVD discs are played in 4:3 ratio only. Refer to the
Blu-ray Disc jacket and then select the appropriate function.
The aspect ratio cannot be
changed.
• The product is not
working.
• Press and hold the remote control's 5 button for 5 seconds in NO DISC mode.
- Using the RESET function will erase all stored settings.
Do not use this unless necessary.
You have forgotten the
rating level password.
• With no disc in the product, press and hold the product's 5 button for longer than 5
seconds. INIT appears on the display and all settings will return to the default values.
Then, press the POWER button.
- Using the RESET function will erase all stored settings.
Do not use this unless necessary.
Can't receive radio
broadcasts.
• Is the antenna connected properly?
• If the antenna's input signal is weak, install an external FM antenna in an area with
good reception.
While listening to TV audio
through the Product, no
sound is heard.
•
If the OPEN/CLOSE
^
button is pressed while listening to TV audio using the D. IN or
AUX functions, the
functions are turned on and the TV audio is muted.
Blu-ray/DVD disc
"Not Available" appears on
screen.
• The features or action cannot be completed at this time because:
1. The Blu-ray/DVD disc's software restricts it.
2. The Blu-ray/DVD disc's software doesn’t support the feature (e.g., angles)
3. The feature is not available at the moment.
4. You’ve requested a title or chapter number or search time that is out of range.
If the HDMI output is set to a
resolution your TV cannot
support (for example, 1080p),
you may not see a picture on
your TV.
• Press and hold the 5 button on front panel for more than 5 seconds with no disc in
the product. All settings will revert to the factory settings.
No HDMI output.
• Check the connection between the TV and the HDMI jack of the product.
• Check if your TV supports 576p/480p/720p/1080i/1080p HDMI input resolution.
Abnormal HDMI output
screen.
• If random noise appears on the screen, it means that TV does not support HDCP (High-
bandwidth Digital Content Protection).
AllShare Play function
I can see folders shared
through AllShare Play,
but I cannot see the files.
• AllShare Play shows only files corresponding to the Photo, Music, and Movie categories.
Files that do not correspond to these categories may not be displayed.
Video is played
intermittently.
• Check if the network is stable.
• Check if the network cable is properly connected and if the network is not overloaded.
|
42
English
Download from Www.Somanuals.com. All Manuals Search And Download.
Symptom
Check/Remedy
The AllShare Play
connection between the TV
and PC is unstable.
•
•
IP addresses under the same subnetwork should be unique, otherwise IP collision can
results in such a phenomenon.
Check if you have a firewall enabled.
If so, disable the firewall function.
BD-LIVE
I cannot connect to the
BD-LIVE server.
• Test whether the network connection is active by using the Network Status function.
• Check whether a USB memory device is connected to the product.
• The memory device must have at least 1GB of free space to accommodate the BD-LIVE
service.
You can check the available size in BD Data Management. (See page 37)
• See if the BD-LIVE Internet Connection option is set to Allow(All).
• If all above fails, contact the contents provider or update to the latest firmware.
When using the BD-LIVE
service, an error occurs.
•
The memory device must have at least 1GB of free space to accommodate the BD-LIVE
service.
You can check the available size in BD Data Management. (See page 37)
| NOTE |
\
When the factory default settings are restored, all stored user BD data will be deleted.
|
English
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
Specifications
Weight
2.5 kg
Dimensions
430 (W) x 50 (H) x 250 (D) mm
+5°C to +35°C
General
Operating Temperature Range
Operating Humidity Range
Signal/noise ratio
10 % to 75 %
55 dB
FM Tuner
Usable sensitivity
12 dB
Total harmonic distortion
BD (Blu-ray Disc)
0.5 %
Reading Speed : 9.834 m/sec
Reading Speed : 6.98 ~ 7.68 m/sec.
Approx. Play Time (Single Sided, Single Layer Disc) : 135 min.
Reading Speed : 4.8 ~ 5.6 m/sec.
Maximum Play Time : 74 min.
Reading Speed : 4.8 ~ 5.6 m/sec.
Maximum Play Time : 20 min.
1 channel : 1.0 Vp-p (75 Ω load)
DVD (Digital Versatile Disc)
CD : 12 cm (COMPACT DISC)
CD : 8 cm (COMPACT DISC)
Composite Video
Disc
Video Output
Video/Audio
Blu-ray Disc : 576i/480i
DVD : 576i/480i
1080p, 1080i, 720p, 576p/480p
HDMI
PCM multichannel audio, Bitstream audio, PCM audio
80W x 2(3Ω)
80W(3Ω)
Front speaker output
Center speaker output
Surround speaker output
Subwoofer speaker output
80W x 2(3Ω)
100W(3Ω)
Amplifier
Analog input
Digital input
70dB
20Hz~20kHz ( 3dB)
20Hz~40kHz ( 4dB)
Frequency response
S/N Ratio
Channel separation
Input sensitivity
60dB
(AUX)500mV
|
44
English
Download from Www.Somanuals.com. All Manuals Search And Download.
5.1ch speaker system
Speaker system
Front
Surround
3 Ω
Center
3 Ω
Subwoofer
3 Ω
Impedance
3 Ω
Frequency range
140Hz~20kHz
140Hz~20kHz
140Hz~20kHz
40Hz ~ 160Hz
Output sound
pressure level
87dB/W/M
87dB/W/M
87dB/W/M
88dB/W/M
80W
80W
80W
100W
200W
Rated input
Speaker
160W
160W
160W
Maximum input
Front/ Surround : 77 x 107 x 68 mm
Center : 228 x 77 x 70 mm
Subwoofer : 155 x 300 x 285 mm
Dimensions
(W x H x D)
Front/ Surround :0.4 kg
Center : 0.5 kg, Subwoofer : 2.9 kg
Weights
• Samsung Electronics Co., Ltd reserves the right to change the specifications without notice.
• Weight and dimensions are approximate.
• Design and specifications are subject to change without prior notice.
• Network speeds equal to or below 10Mbps are not supported.
• For the power supply and Power Consumption, refer to the label attached to the product.
|
English
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Contact SAMSUNG WORLD WIDE
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer
care center.
Area
Contact Center
Web Site
` Asia Pacific
AUSTRALIA
NEW ZEALAND
CHINA
1300 362 603
0800 SAMSUNG (0800 726 786)
400-810-5858
HONG KONG
(852) 3698 4698
1800 1100 11
3030 8282
1800 3000 8282
1800 266 8282
INDIA
0800-112-8888
INDONESIA
MALAYSIA
021-5699-7777
1800-88-9999
1-800-10-SAMSUNG(726-7864) for PLDT
1-800-3-SAMSUNG(726-7864) for Digitel
1-800-8-SAMSUNG(726-7864) for Globe
02-5805777
PHILIPPINES
SINGAPORE
THAILAND
1800-SAMSUNG(726-7864)
1800-29-3232
02-689-3232
0800-329-999
0266-026-066
1 800 588 889
TAIWAN
VIETNAM
` Middle East
U.A.E
800-SAMSUNG (726-7864)
800-SAMSUNG(726-7864)
183-2255
8000-4726
08000-726786
800-22273
021-8255
080 100 2255
9200-21230
OMAN
KUWAIT
BAHRAIN
Egypt
JORDAN
IRAN
Morocco
Saudi Arabia
` Africa
NIGERIA
0800-726-7864
0800-10077
0302-200077
Ghana
Cote D’ Ivoire
Senegal
CAMEROON
KENYA
UGANDA
TANZANIA
SOUTH AFRICA
8000 0077
800-00-0077
7095- 0077
0800 724 000
0800 300 300
0685 88 99 00
0860-SAMSUNG(726-7864 )
AH68-02442S-00
Download from Www.Somanuals.com. All Manuals Search And Download.
|