■ Before attempting to operate this product, please read
the instructions carefully.
•
•
ENGLISH
ESPAÑOL
•日本語
SALES NETWORK
SAMSUNG TECHWIN CO., LTD.
145-3, Sangdaewon 1-dong, Jungwon-gu,
Seongnam-si, Gyeonggi-do 462-703, Korea
Tel : +82-31-740-8137~8141 Fax : +82-31-740-8145
SAMSUNG OPTO-ELECTRONICS AMERICA, INC.
ELECTORONIC IMAGING DIV.
40 Seaview Drive, Secaucus, NJ 07094, U.S.A
Tel : +1-201-902-0347 Fax : +1-201-902-0429
SAMSUNG OPTO-ELECTRONICS UK LTD.
Samsung House, 1000 Hillswood Drive,
Hillswood Business Park Chertsey, Surrey KT16 OPS
Tel : +44-1932-45-5308 Fax : +44-1932-45-5325
Operation/Programming
SAMSUNG TECHWIN MOSCOW OFFICE
Korp 14, 37-A, PR-KT, Lenningradsky,
Moscow 125167, Russia
TIANJIN SAMSUNG OPTO-ELECTRONICS CO., LTD .
7 Pingchang Rd., Nankai Dist. Tianjin 300190, P.R China
Tel : +86-22-2761-4724(33821) Fax : +86-22-2761-6514
Tel : +7-95-258-9296, 9298 Fax : +7-95-258-9297
P/No.:6806-0575-01A
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Warning & Caution .................................................................................... 6
Main Features ........................................................................................... 9
Camera settings ...................................................................................... 26
OSD Menu Configuration .............................................................. 26
Dome Camera User’s Menu Setting ............................................ 28
Camera Setting ............................................................................. 28
Sequence Setting ......................................................................... 35
P/T Setting .................................................................................... 40
OSD Setting ................................................................................. 44
Alarm Setting ............................................................................... 47
Initialize Setting ............................................................................. 50
Status ............................................................................................ 51
Components ............................................................................................ 10
Front Panel ................................................................................... 10
Back Panel .....................................................................................11
Getting started ......................................................................................... 12
Bracket Setup for Installation .........................................................12
Initial Setting ..................................................................................13
Accessories ....................................................................................19
How to Install ........................................................................................... 20
Cable ..............................................................................................20
Accessories (option) .......................................................................22
How to Install Camera ....................................................................24
Product Appearance and Installation Method ......................................... 52
System configuration................................................................................ 53
Specifications .......................................................................................... 55
4
5
SPEED DOME CAMERA
SPEED DOME CAMERA
Download from Www.Somanuals.com. All Manuals Search And Download.
Warning & Caution
Warning
Please read the instructions carefully for correct use of the product, and observe these
cautions to prevent danger or physical damage while operating it.
Always stop using the product if it emits smoke
The unit should be installed by trained
personnel.
or becomes unusually hot.
Warning / Caution
Installation by unskilled personnel without sufficient experience or
expertise may result in fire or electric shock. Always ask your sales
agent to perform installation.
Continuing to use it under such circumstances may result in fire.
If you fail to read this information, or handle the product
Warning
incorrectly, death or serious injury may result.
Never install the product in areas exposed to
water, oil or gas.
Never install the product on a ceiling that Is not
strong enough to bear its weight.
If you fail to read this information, or handle the product
Caution
incorrectly, serious injury or physical damage may result.
Sign
Doing so may result in malfunctions, electric shock or fire.
The product may fall.
Not allowed.
Never disassemble the product or insert foreign
bodies into it.
Never touch the power cord with wet hands.
No disassembly.
Be sure to keep this.
Malfunction may result.
Touching the power cord with wet hands may result in electric shock.
6
7
SPEED DOME CAMERA
SPEED DOME CAMERA
Download from Www.Somanuals.com. All Manuals Search And Download.
Caution
Main Features
Never install the product in locations with
Never install the product in places where the
lighting conditions fluctuate.
extreme high or low temperature.
Auto-focusing 22x Zoom lens
Day & Night function
The digital zoom function of the built-in 22x zoom
lens, together with its auto-focus feature, zooms
an image by up to 220x.
Slow-shutter and day and night switching enable
optimum screen monitoring over 24 hours.
✽Slow-shutter function improves CCD sensitivity
by electrically lengthening exposure time.
✽Day & Night function enables the color and
black and white screens to be used respectively
during the day and at night.
Various auto-surveillance functions
Installing the product in areas subject to temperatures of over 50°C
or below 0°C may result in deterioration of picture quality or other
problems. Pay special attention to ventilation when installing the
product in high ambient temperatures.
Frequent changes of illumination, for example from unstable
fluorescent lighting, may result in malfunction.
·PTZ trace
Manually plays recorded images of up to about
120 seconds.
OSD (On Screen Display) function
Provides character information displayed on the
monitor, such as the camera ID address, camera
name, preset number, preset name, area name
and sequence status, and easily sets various
camera functions from the OSD menu screen.
·Auto swing
Repeats pan and tilt between two preset
positions.
Never drop the product, or subject it to severe
impact or vibration.
Never expose the product to direct sunlight or
harmful rays.
·Group sequence
Switches to and checks a maximum of 128
preset positions in order.
·Tour sequence
Switches to and checks a maximum of 6 group
sequences in order.
Home Position Auto Return function
Returns the dome to a specified preset position
at a fixed time after ending manual operation.
Direct sunlight or harmful rays may cause fatal damage to the CCD
or internal circuitry.
Malfunction may result.
Smart P/T function
128 Preset Positions
Never touch the glass on the front of the
product.
Never install the product in areas exposed to
rain or water.
Pan and tilt speed compensation function linked
to zoom position allows fine manual operation
even during zooming.
A maximum of 128 preset positions can be set.
The preset function enables you to set the
location you want to monitor at any time.
Area Masking for 8 points
Auto Flip
Area Masking can be set up for up to 8 points.
For Privacy, this device provides a function for
hiding the points for which Area Masking is
selected from the screen.
For monitoring an object moving below a
camera, run Auto Flip using a joystick controller,
and moving objects can be monitored without
reversing, both up and down and left to right.
If water gets into the product it may cause failure.
This glass is one of the key components.
Be careful not to leave fingerprints or other marks on the glass.
8
9
SPEED DOME CAMERA
SPEED DOME CAMERA
Download from Www.Somanuals.com. All Manuals Search And Download.
Components
Front Panel
Back Panel
Connector Cable
Connect to the bracket
connector for installation.
Power Switch
Power on or off
(※Factory default : OFF)
Rotary Switch 2 (SW2)
Camera ID address setting
switch.
Controller In Terminal
Protocol Selection Switch
DIP Switch (SW3)
Rotary Switch 1 (SW1)
Camera ID address setting
switch.
For setting each function
1. For selecting a controller
2. For factory setting
3. For terminal setting
4. For terminal setting
Video Out Terminal
AC 24V Out
ALARM Out
ALARM In
Power LED
Cautions
·If the Rotary Switch and DIP Switch (SW3) are not displayed, turn the power off and on again. Both switches will then be
displayed.
·Do not pull or hold onto the connector cables when moving or delivering the product. It may cause operational failure.
·See the inside of the door for settings for the switches on the main unit of the product.
Power In Terminal
10
11
SPEED DOME CAMERA
SPEED DOME CAMERA
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting started
Bracket Setup for Installation
Initial Setting
Video Out
Alarm In 1
Alarm In 2
●
Communication Protocol Setting (Installation Bracket)
Select and set SW1 on the installation bracket for setting the communication protocol.
Alarm In 3
Alarm In 4
Protocol
Samsung
Samsung
Pelco-D
Pelco-D
Pelco-D
Reserve
Baud Rate (BPS)
9,600
SW1
0
1
2
3
4
5~F
19,200
2,400
4,800
9,600
Alarm Out 1
Note) Factory Default : 0 (Samsung, 9600)
Alarm Out 2
●
Baud Rate Setting by DVR Model
For control of the speed dome camera using DVR without a dedicated controller, set the baud rate by DVR
model as described below.
AC 24V Output (for Heater connection)
Protocol
Samsung
Pelco
DVR Model
SVR-430
SVR-900/1620
SVR-1630
9600,19200
9600,19200
9600,19200
9,600
4800, 9600
2400,4800,9600
Mainframe 18PIN Connector
Note) A faster rate may degrade stability.
The control function may not be available depending on the DVR Firmware version.
Be sure to install the latest DVR Firmware version.
●
Camera ID Setting (Mainframe front panel)
·Set the Camera ID using the two rotary switches. SW1 and SW2
refer to the lower and upper positions, respectively.
SW2
0
SW1
1
·
EX) If the camera ID is number 1, set as described below.
SW2
SW1
12
13
SPEED DOME CAMERA
SPEED DOME CAMERA
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting started
●
Camera ID Switch Setting
Camera ID
SW2
SW1
Remarks
Camera ID
SW2
SW1
Remarks
Camera ID
SW2
SW1
Remarks
Camera ID
SW2
SW1
Remarks
Not applicable
ID = 0
ID = 1
ID = 2
ID = 3
ID = 4
ID = 5
ID = 6
ID = 7
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
0
1
2
3
4
5
6
7
8
9
A
B
C
D
E
F
0
1
2
3
4
5
6
7
8
9
A
B
C
D
E
F
0
1
2
3
4
5
6
7
8
9
A
B
C
D
E
F
ID = 48
ID = 49
ID = 50
ID = 51
ID = 52
ID = 53
ID = 54
ID = 55
ID = 56
ID = 57
ID = 58
ID = 59
ID = 60
ID = 61
ID = 62
ID = 63
ID = 64
ID = 65
ID = 66
ID = 67
ID = 68
ID = 69
ID = 70
ID = 71
ID = 72
ID = 73
ID = 74
ID = 75
ID = 76
ID = 77
ID = 78
ID = 79
ID = 80
ID = 81
ID = 82
ID = 83
ID = 84
ID = 85
ID = 86
ID = 87
ID = 88
ID = 89
ID = 90
ID = 91
ID = 92
ID = 93
ID = 94
ID = 95
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
0
1
2
3
4
5
6
7
8
9
A
B
C
D
E
F
0
1
2
3
4
5
6
7
8
9
A
B
C
D
E
F
0
1
2
3
4
5
6
7
8
9
A
B
C
D
E
F
ID = 96
ID = 97
ID = 98
ID = 99
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
0
1
2
3
4
5
6
7
8
9
A
B
C
D
E
F
0
1
2
3
4
5
6
7
8
9
A
B
C
D
E
F
0
1
2
3
4
5
6
7
8
9
A
B
C
D
E
F
ID = 144
ID = 145
ID = 146
ID = 147
ID = 148
ID = 149
ID = 150
ID = 151
ID = 152
ID = 153
ID = 154
ID = 155
ID = 156
ID = 157
ID = 158
ID = 159
ID = 160
ID = 161
ID = 162
ID = 163
ID = 164
ID = 165
ID = 166
ID = 167
ID = 168
ID = 169
ID = 170
ID = 171
ID = 172
ID = 173
ID = 174
ID = 175
ID = 176
ID = 177
ID = 178
ID = 179
ID = 180
ID = 181
ID = 182
ID = 183
ID = 184
ID = 185
ID = 186
ID = 187
ID = 188
ID = 189
ID = 190
ID = 191
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
0
1
2
3
4
5
6
7
8
9
A
B
C
D
E
F
0
1
2
3
4
5
6
7
8
9
A
B
C
D
E
F
0
1
2
3
4
5
6
7
8
9
A
B
C
D
E
F
ID = 100
ID = 101
ID = 102
ID = 103
ID = 104
ID = 105
ID = 106
ID = 107
ID = 108
ID = 109
ID = 110
ID = 111
ID = 112
ID = 113
ID = 114
ID = 115
ID = 116
ID = 117
ID = 118
ID = 119
ID = 120
ID = 121
ID = 122
ID = 123
ID = 124
ID = 125
ID = 126
ID = 127
ID = 128
ID = 129
ID = 130
ID = 131
ID = 132
ID = 133
ID = 134
ID = 135
ID = 136
ID = 137
ID = 138
ID = 139
ID = 140
ID = 141
ID = 142
ID = 143
ID = 8
ID = 9
ID = 10
ID = 11
ID = 12
ID = 13
ID = 14
ID = 15
ID = 16
ID = 17
ID = 18
ID = 19
ID = 20
ID = 21
ID = 22
ID = 23
ID = 24
ID = 25
ID = 26
ID = 27
ID = 28
ID = 29
ID = 30
ID = 31
ID = 32
ID = 33
ID = 34
ID = 35
ID = 36
ID = 37
ID = 38
ID = 39
ID = 40
ID = 41
ID = 42
ID = 43
ID = 44
ID = 45
ID = 46
ID = 47
Not applicable
Not applicable
14
15
SPEED DOME CAMERA
SPEED DOME CAMERA
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting started
Note
·Factory Default : Camera ID = 1
The rotary switch is on the controller board (controllable from the initial PAN position)
Camera ID
SW2
SW1
Remarks
Camera ID
SW2
SW1
Remarks
ID = 192
ID = 193
ID = 194
ID = 195
ID = 196
ID = 197
ID = 198
ID = 199
ID = 200
ID = 201
ID = 202
ID = 203
ID = 204
ID = 205
ID = 206
ID = 207
ID = 208
ID = 209
ID = 210
ID = 211
ID = 212
ID = 213
ID = 214
ID = 215
ID = 216
ID = 217
ID = 218
ID = 219
ID = 220
ID = 221
ID = 222
ID = 223
ID = 224
ID = 225
ID = 226
ID = 227
ID = 228
ID = 229
ID = 230
ID = 231
ID = 232
ID = 233
ID = 234
ID = 235
ID = 236
ID = 237
ID = 238
ID = 239
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
0
1
2
3
4
5
6
7
8
9
A
B
C
D
E
F
0
1
2
3
4
5
6
7
8
9
A
B
C
D
E
F
0
1
2
3
4
5
6
7
8
9
A
B
C
D
E
F
ID = 240
ID = 241
ID = 242
ID = 243
ID = 244
ID = 245
ID = 246
ID = 247
ID = 248
ID = 249
ID = 250
ID = 251
ID = 252
ID = 253
ID = 254
ID = 255
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
0
1
2
3
4
5
6
7
8
9
A
B
C
D
E
F
·The three kinds of camera ID below cannot be used.
Camera ID
R-SW2
R-SW1
ID = 0
0
0
F
0
A
A
ID = 160
ID = 175
● Controller Model Setting (Mainframe front panel)
·Set the controller model by switching Dip Switch No. 1
ON
OFF
SW3
ON
Functions
OFF
SCC-16, SCC-3000
SW3-#1
Controller Setting
SVR-430/900 /1620/1630
Note) Factory Default : OFF
Simultaneous control by a controller and a DVR is not allowed.
●
Factory Default (Mainframe front panel)
OFF
Functions
ON
Factory Default
SW3-#2
OFF for both switches
Note) Factory Default : OFF
● RS-485 Terminal Setting (Mainframe front panel)
·Set the terminal by switching Dip Switch No. 3 and 4 On/Off.
Camera Connection Position
Longest Route Terminal
SW3-#3
ON
SW3-#4
ON
On the route
OFF
OFF
Note) Factory Default: On for both switches
16
17
SPEED DOME CAMERA
SPEED DOME CAMERA
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting started
It is necessary to connect the terminating resistance to the two units that are furthermost from the relevant
camera/controller on the RS-485 Interface in order to prevent signal attenuation.
Accessories
Since cameras have embedded terminating resistance, select whether to activate or deactivate their terminating
resistance by using the DIP Switch. Refer to the connection layout below for deciding which unit is to be connected to
the terminating resistance. Set the terminating resistance to the gray colored unit.
The maximum distance for setting the terminating
resistance is 1.2Km.
Template
User’s manual
3 fixing screws
1cable lock screw
Installation Bracket
Safety wire
※
Options
The components below are options
Component
Model
Description
Pan/Tilt/Zoom/Focus Control, OSD Action, a variety of function settings
Housing for Indoor Installation
Camera Controller
SCC-16, SCC-3000
Indoor Housing
STH-160PI
STH-128PE
STH-160PO
Ceiling Embedded Indoor Housing
Indoor Embedded Housing
Outdoor Housing
Wall mounted
Housing (with built-in fan and heater) for outdoor installation
Wall mounted type
STB-270PW
STB-496PP
Ceiling mounted
AC Adapter
Ceiling mounted type
Input : AC 110V
Input : AC 230V
STA-110
STA-230
18
19
SPEED DOME CAMERA
SPEED DOME CAMERA
Download from Www.Somanuals.com. All Manuals Search And Download.
How to Install
Cable
Preparation
Connection
1. First, connect one end of the BNC cable to the video
out terminal.
For SPD-2200 installation, the cables listed below have to be prepared.
Monitor In Terminal
Video Out Terminal
● Power adapter cable
2. Connect the other end of the BNC cable to the video
in terminal of the monitor.
The cable to be connected to the power in the SPD-2200 terminal includes the power adapter, for which the rated
voltage is AC24V, 2.5A as described below. (Use UL listed class 2 power source.)
Monitor
Screwdriver
3. Connect one end of the power adapter, comprising
two lines, to the Power In Terminal of the bracket
using the flathead screwdriver as shown in the figure
below.
● VideoꢀCable
The cable connecting the SPD-2200 video out terminal and the monitor is the BNC cable as described below.
Power In Terminal
Power Adapter
4. Connect the power adapter plug to the power outlet.
● RS-485 Communication Cable
The cable connecting the controller for the SPD-2200’s RS-485 communication is described below.
Controller Connection
Terminal
5. Connect the connection terminal of the SPD-2200
controller to the external controller.
Data Box
Note
·Adapter, Video and RS-485 communication cables not supplied.
Controller
20
21
SPEED DOME CAMERA
SPEED DOME CAMERA
Download from Www.Somanuals.com. All Manuals Search And Download.
How to Install
4) Wall Mounting (STB-270PW)
Accessories (option)
Assembly used when an indoor and outdoor housing for a speed dome camera is to be mounted on a wall.
● Cautions
- Confirm that the installation location is strong enough to bear more than 4 times the total weight of the
assembly and the speed dome camera (SPD-2200).
- Only install the camera where there is more than 500mm of space above the ceiling board.
- In installing the bracket, use the installation guide template, screws and cables supplied with the camera.
- There is a risk that the camera may be dropped during installation. Prevent any possibility of the camera falling
by using the security cable during installation. Unauthorized persons should be prevented from gaining access
to the installation site.
5) Ceiling Mounting (STB-496PP)
● Options related to installation
Assembly used when an indoor and outdoor housing for a speed dome camera is to be mounted on a
concrete ceiling.
The options below, when purchased, will facilitate the installation in a variety of different sites.
1) Indoor embedded Housing (STH-128PE)
This housing is used when a speed dome camera is embedded in a double ceiling.
2) Indoor and Outdoor Housing (STH-160PI, STH-160PO)
This housing is used when a speed dome camera is mounted on a wall or ceiling inside or outside.
Cautions
·When installing the speed dome camera in an indoor/outdoor housing, remove the dome cover (front glass) to obtain a clearer
image.
22
23
SPEED DOME CAMERA
SPEED DOME CAMERA
Download from Www.Somanuals.com. All Manuals Search And Download.
How to Install
How to Install the Camera (using the Embedded Housing)
① Make a hole of 155mm in diameter in the ceiling to install the camera. Pull the cable down through it.
Embedded Housing
Ceiling
Hole for Fixing the Dome Camera
Installation Bracket
Installation bracket connector
Camera connector
Installation Pin
Screws to prevent the
camera from coming loose.
② Connect the video cable, controller cable and power adapter cable to the mounting bracket. (See Page 19)
Controller connection cable
Video connection cable
Power adapter connection cable
External Cover (Decoration ring)
③ Fix the mounting bracket to the Embedded housing using three screws.
④ Fasten the eye bolt on the housing and fix the housing to the ceiling, using the cable to prevent it from falling.
⑤ Fix the housing to the ceiling using three screws.
Cautions
⑥ Connect the Installation bracket to the connector of the speed dome camera.
⑦ Insert the pin at the bottom of the camera into the bracket fixing hole and turn it anticlockwise to secure.
⑧ Fasten the lock screw.
·Check the power adapter input power before connecting the power supply.
·Install the camera using the installation template and cable and fixing screws that are supplied separately for installations
without a housing.
·Note that the locking screws should be fastened. If one of the locking screws is not properly fastened, the camera may fall due
to vibration or impact once it is installed.
⑨ Place the external cover over the housing and then rotate and fix it.
24
25
SPEED DOME CAMERA
SPEED DOME CAMERA
Download from Www.Somanuals.com. All Manuals Search And Download.
Camera setting
Set Preset
Pan Swing
Tilt Swing
Setting/Execute/Clear/Status
Setting/Execute/Clear
Setting/Execute/Clear
Auto/Manual
Group1~Group6
Setting/Execute/Clear
Replay/Memorize
ON/OFF
OSD Menu Configuration
Swing Focus Mode
Group SEQ
Tour SEQ
MANUAL
OFF
Sequence
Setting
Setting/Execute/Clear
This model enables dome camera setting, using the OSD (On Screen Display) menu displayed on the video output,
by exclusive control.
PTZ Trace
Power On Resume
Pan Limit
The joystick in the OSD menu modes is controlled as described below.
This function is also enabled by sending the exclusive control code from a PC to a dome camera.
Position/ON/OFF
Position/ON/OFF
Area 1~ Area 8
Mask1~Mask8
ON/OFF
Tilt Limit
Area Setting
Name/Position/Clear/On/Off
Position ON/OFF
Menu
TILT Up
Functions
Up on the OSD
Down on the OSD
Left on the OSD
Right on the OSD
Area Masking
Home Position
P/T Setting
TILT Down
PAN Left
PAN Right
Setting
ON/OFF
ON/OFF
ON
ON
ON
Smart P/T
ON/OFF
Auto Filp
ON/OFF
Camera ID
● Menu Configuration
Edit, ON/OFF
ON/OFF
Camera Name
Preset Number
Preset Name
Sequence Status
Area Name
P1
P2
P3
P4
Defaults
One Shot AF
4X
ON
OSD Setting
Focus Mode
Digital Zoom
Auto/Manual/One Shot AF
Edit, ON/OFF
ON/OFF
Focus
ON
OFF
OFF
ON/OFF
AUTO/AWC/MANUAL
/OUTDOOR/INDOOR
Manual : WB RED
WB BLUE
Auto
ON/OFF
Alarm Enable
White Balance
Exposure
AWB Mode
AE Mode
NC/NO/OFF
1~4(Priority)
Preset/Group/Tour
1~4
000
000
Alarm Input
Alarm1~Alarm4
AUTO/AGC OFF/ALL/AGC/IRIS/SHUTTER
- Shutter SPD
Auto
1/60
170
Out1 SET~Out2 SET
Out1 Time~Out2 Time
MD
- Iris Adjust
1~60(Sec)
1~60(Min)
1~60(Hour)
- AGC Adust
-
Alarm Out
Alarm
Setting
D&N Mode
Slow Shutter
Mode
Auto/Day/Night
Auto
OFF
OFF
Camera
Setting
0(OFF), 1~9 (2Fields~128Fields)
ON/OFF
Out1 Off~Out2 Off
MD Execute
Back Light
Sync
Detect Area
Whole/Upper/Lower/Center
Whole
12
Area
Center/Upper/Lower/Left/Right Center
Motion
Detection
Sensitivity
Weight
Low/High
Low
Internal
225
Preset No.
Internal
Cancel / Execute
Cancel / Execute
Cancel / Execute
OFF, 1~7 Days
Power On Reset
Factory Default Set
Camera Default Set
Auto Refresh
Line Lock
Line Lock Phase
Brightness
Flickerless
050
Inltialize
ON/OFF
Sharpness
Mirror
OFF
7 Days
10
Status
ON/OFF
OFF
Others
Note
Nega/Posi
Negative/Positive
Positive
·Preset setting is available both from the controller and the OSD menu.
26
27
SPEED DOME CAMERA
SPEED DOME CAMERA
Download from Www.Somanuals.com. All Manuals Search And Download.
Camera setting
FOCUS
● Dome Camera Users’Menu Settings
The Focus menu sets the focus mode to either Auto or Manual Mode.
How to Use the OSD Menu
① Focus Mode
Check whether the camera is set to manual mode and press the OSD Menu Key, or 1 and the MENU Key at the
·Auto : Automatically focuses by continuous monitoring in Auto Mode. Since the focus is automatically
adjusted when the Zoom key is controlled, Focus key input is not applied.
·Manual : The Manual mode enables the user to manually adjust the focus.
·One Shot AF : One Shot AF activates auto-focusing when the camera stops moving.
When the camera stops, it works as in Manual Mode.
same time.
The screen will then display the contents as shown below.
Main Menu
Move the cursor downwards to the submenu to set. Press the
Main Menu
Enter key on the selected submenu. You can then change and
Camera Setting
② Digital Zoom
set the submenu. Press the ESC KEY, and the OSD menu
Sequence Setting
P/T Setting
OSD Setting
Changes the digital Zoom factors.
closes.
※We recommend setting the digital zoom factor before presetting.
For more details, please see the Controller User Manual.
Alarm Setting
Initialize
Status
Cautions
Digital Zoom
·The higher the digital zoom factor, the lower the image quality.
1) Camera Setting
Select Camera Setting in the Main Menu Window, and the Camera Setting Menu appears.
Auto-focus
·The Auto-Focus may not work properly under the conditions below.
Camera Setting Menu
- If the illumination in a monitoring zone is low
- If the Slow-Shutter is activated
Camera Setting
Focus
Focus
Focus Mode
Digital Zoom
- If the amplification degree is increased
One Shot Af
4X
- If the illumination in a monitoring zone is excessively high
- If both remote objects and close objects are included in a monitoring zone
- If there is no contrast (black and white), such as the sky or a wall, within the picture
- If there is a thin horizontal line within an image
White Balance
Exposure
Back Light
Sync
OFF
Press the
Enter key
Brightness
Flickerless
Others
050
OFF
28
29
SPEED DOME CAMERA
SPEED DOME CAMERA
Download from Www.Somanuals.com. All Manuals Search And Download.
Camera setting
Exposure
AE Mode
Camera Setting
Focus
White Balance
AUTO
Camera Setting
Focus
AUTO
AUTO
AWB Mode
D & N Mode
Slow Shutter 6
White Balance
Exposure
White Balance
Exposure
Press the
Enter key
Back Light
Sync
OFF
Press the
Enter key
Back Light
Sync
OFF
Brightness
Flickerless
Others
050
OFF
Brightness
Flickerless
Others
050
OFF
White Balance
Exposure
The White Balance menu activates the white balance function, which adjusts the correct white color for lighting with any color
temperature.
Controls the camera exposure
① AE Mode
Select from Auto/AWC/Indoor/Outdoor/Maunual
·Auto: Automatically adjusts the video signal brightness according to the light intensity.
·AGC OFF : Sets AGC Gain as OFF.
① AWB Mode
·All: Manually sets the electronic Shutter, Iris and AGC.
·AGC: Manually sets AGC.
·Auto : Automatically adjusts the colors according to changes in the light source.
·AWC : Sets the lighting condition for an object and forcibly adjusts its color to white. Images can only
be captured under this preset condition
-AGC Adjust : The AGC (Automatic Gain Control) menu sets whether or not to control the gain
automatically when an object is viewed in poor lighting, such that the image
brightness is below a certain level. Select the AGC Adjust menu, and you can increase
or decrease the level value.
·Manual : Sets the color temperature with the appropriate ratio of RED to BLUE.
- WB Manual
Users can adjust the colors by adding or reducing the percentage of Red or Blue.
- WB Red
·IRIS: Manually sets the Iris.
The Red Gain can be changed.
-Iris Adjust : Sets the video signal brightness on the screen by adjusting the Iris level.
·Shutter: Manually sets the electronic Shutter rate.
- WB Blue
The Blue Gain can be changed.
-Shutter SPD : The Shutter SPD supports 8 shutter speed rates from 1/60 sec. to 1/10,000 sec.
·Outdoor: Sets the color temperature to 5,600K.
·Indoor : Sets the color temperature to 3,200K.
[Table-1 Step-by-Step Setting]
High-Speed Shutter
1
2
3
4
5
6
7
8
(Sec)
1/60
1/125
1/250
1/500
1/1,000
1/2,000
1/4,000
1/10,000
30
31
SPEED DOME CAMERA
SPEED DOME CAMERA
Download from Www.Somanuals.com. All Manuals Search And Download.
Camera setting
② D&N Mode (Day & Night Mode)
Camera Setting
Focus
Back Light
Mode
Automatically detects the degree of darkness at night, or in poor lighting conditions, and so keeps the screen
OFF
bright and clear.
White Balance
Exposure
Area
CENTER
LOW
·Auto : When the Auto Mode is selected, it automatically switches to Color mode to maintain optimum color
during the day, and to Black and White mode at night for clearer pictures in poor lighting.
However, the Slow Shutter doesn’t work in Auto Mode.
Press the
Enter key
Weight
Back Light
Sync
Brightness
Flickerless
Others
050
OFF
·Day : Maintains color images. The Slow Shutter function is activated in this mode.
·Night : Maintains black and white images. The Slow Shutter function is deactivated in this mode.
③ Slow Shutter
Back Light Ctrl
The Slow Shutter is activated only in Day Mode and keeps the screen bright and clear in low lighting
conditions.
·BLC Mode
Use when the difference between light levels at the center of the screen and the edge of the screen is great –
for example when there is backlight.
Increase the level in the menu, and the maximum level can be adjusted. (X2~X128) The larger the scale, the
brighter the screen. However, the after-image of moving objects is also increased.
ON activates the Backlight function and OFF deactivates it. The default is OFF.
·Area Mode
[Table-2 Step-by-Step Setting]
Set the area for backlight compensation. The default is Center.
- Center : compensates for backlight in the center area of the screen.
- Upper : compensates for backlight in the upper area of the screen.
- Lower : compensates for backlight in the lower area of the screen.
Low-Speed Shutter
(Fields)
0
1
2
3
4
5
6
7
8
9
Shutter OFF
X2
X4
X8
X12
X16
X24
X32
X64
X128
- Left
: compensates for backlight in the left area of the screen.
Note
- Right : compensates for backlight in the right area of the screen.
The relationship between AE Mode and D&N Mode is described below.
AE
Center
Upper
Lower
Left
Right
Shutter
Iris
AGC
D&N
Day(OFF)
Adjustable
Auto Mode
Auto Mode
Adjustable
Adjustable
Auto
Keep the Day status value (No change allowed) Keep the Day status value (No change allowed)
Keep the Day status value (No change allowed) Keep the Day status value (No change allowed)
Night(ON)
·Weight
The relationship between AE Mode and D&N Mode is described below.
Set the level of backlight compensation. The default is High.
- Low : slightly improves the backlight compensation.
- High : substantially improves the backlight compensation.
AE
AUTO
Manual
D&N
Slow Shutter Mode not available
Day(OFF)
Slow Shutter Mode available
Automatic D&N switching not available
Auto
Automatic D&N switching available
Note
·The Area and Weight set by BLC Mode are only effective only when a camera is not moving. When the camera is rotating, as with
Preset/Group/Tour/Trace, the camera works with the Area on Center and the Weight on High.
32
33
SPEED DOME CAMERA
SPEED DOME CAMERA
Download from Www.Somanuals.com. All Manuals Search And Download.
Camera setting
2) Sequence Setting
Camera Setting
Focus
Sync
Sync Mode
Line Lock Phase 225
Internal
Sequence Setting
Set Preset
Setting
Execute
Clear
White Balance
Exposure
Back Light
Sync
Brightness
Flickerless
Others
Set Preset
Pan Swing
Tilt Swing
Swing Focus Mode MANUAL
Group SEQ
Tour SEQ
Press the
Enter key
Status
050
OFF
Press the
Enter key
PTZ Trace
Power On Resume
OFF
Sync
① Set Preset
Selects Internal synchronization/Line Lock. The default is Internal synchronization.
When users set their own chosen PAN/TILT positions or ZOOM and FOCUS, they can call frequently and monitor
the status. Up to 128 positions can be preset. (1~128)
·Internal : Internal sync method
·Line Lock : The internal sync method is the power-frequency synchronization method. The power phases of
several units can be adjusted.
·Setting : Select the preset No. to set, adjust the PAN/TILT/ZOOM and press Enter.
·Execute : Select the preset No. to run, and the relevant camera starts running.
·Clear : Select the preset No. to clear, and the relevant setting is deleted.
·Status : Displays the current preset No.
·Line Lock Phase : With the Line Lock, the phase can be adjusted from 0°to 360°. The default is 225°.
※For Internal, the Line Lock Phase cannot be adjusted.
Brightness
Sets video signal brightness on the screen.
Flickerless
Sequence Setting
Pan Swing
Set Preset
Setting
Execute
Clear
Flickerless Mode
Pan Swing
Tilt Swing
Swing Focus Mode MANUAL
Group SEQ
Tour SEQ
PTZ Trace
Sets the Flickerless Mode ON or OFF. Fluorescent tube flicker is eliminated.
Note
Press the
Enter key
·D/N Mode is not activated when the Flickerless mode is ON.
Power On Resume
OFF
Others
② Pan Swing
① Sharpness
Activates and sets Swing monitoring in the Pan direction and deletes data
·Setting : Selects the preset swing position with the joystick and sets the position with the Enter key.
SPD is the speed the camera moves.(001~240°/sec)
DWL is the dwell time for the camera.(1~128sec)
Highlights image contour by increasing the Aperture Gain of the camera.
② Mirror
Reverses the video output signal from left to right and vice versa
Completes the setting by pressing the Enter key on the selected position.
·Execute: Starts swing monitoring.
③ Nega/Posi
The video output signal is changed to positive or negative.
Stops it with the Stop key.
·Clear : Deletes the swing data
34
35
SPEED DOME CAMERA
SPEED DOME CAMERA
Download from Www.Somanuals.com. All Manuals Search And Download.
Camera setting
Sequence Setting
Sequence Setting
Tilt Swing
Setting
Set Preset
Set Preset
Pan Swing
Tilt Swing
Swing Focus Mode MANUAL
Group SEQ
Pan Swing
Tilt Swing
Swing Focus Mode MANUAL
Group SEQ
Execute
Clear
Press the
Enter key
Tour SEQ
Tour SEQ
PTZ Trace
PTZ Trace
Power On Resume
OFF
Power On Resume
OFF
④ Swing Focus Mode
③ Tilt Swing
This mode is for activating the Auto Focus during continuous operation of Pan or Tilt Swing.
Note) Excessively fast Pan or Tilt Swing may disrupt the Auto Focus.
·AUTO/MANUAL
Activates and sets Swing monitoring in the Tilt direction and deletes data
·Setting
AUTO activates the Auto Focus.
SSelects the preset swing position with the joystick and sets the position with the Enter key.
SPD is the speed with which the camera moves.(001~240°/sec)
DWL is the dwell time for the camera.(1~128sec)
Sequence Setting
Group SEQ
Group 1
Set Preset
Pan Swing
Tilt Swing
Swing Focus Mode MANUAL
Group SEQ
Tour SEQ
PTZ Trace
Group 2
Group 3
Group 4
Group 5
Group 6
Completes the setting by pressing the Enter key on the selected position.
·Execute
Press the
Enter key
Starts swing monitoring.
Stops it with the Stop key.
Power On Resume
OFF
·Clear
Deletes the swing data.
⑤ Group SEQ
Starts and sets Sequence monitoring and deletes the data. Registers up to 6 groups.
·Setting
Notes
Select the Preset Position to monitor using the joystick, and set the position using the Enter Key.
·For 0° Tilt in Wide mode, about a third of the object does not appear on the screen.
Some objects may appear whiter than the actual colors as a result of the AGC effect.
SPD is the speed with which the camera moves. (001~240°/sec)
DWL is the dwell time for the camera. (1~128sec)
Completes the setting by pressing the Enter key on the selected position.
·Execute
Starts Group monitoring.
Stops it with the Stop key.
·Clear
Deletes the group data.
36
37
SPEED DOME CAMERA
SPEED DOME CAMERA
Download from Www.Somanuals.com. All Manuals Search And Download.
Camera setting
Sequence Setting
Sequence Setting
PTZ Trace
Tour SEQ
Setting
Replay
Set Preset
Set Preset
Pan Swing
Tilt Swing
Swing Focus Mode MANUAL
Group SEQ
Pan Swing
Tilt Swing
Swing Focus Mode MANUAL
Group SEQ
Memorize
Execute
Clear
Press the
Enter key
Press the
Enter key
Tour SEQ
Tour SEQ
PTZ Trace
PTZ Trace
Power On Resume
OFF
Power On Resume
OFF
⑦ PTZ Trace
⑥ Tour
Memorizes and plays the manual control routes (Pan, Tilt, Zoom and Focus)
•Replay
Starts and sets Group monitoring and deletes the data.
•Setting
Repeatedly plays the manual control routes
Stops it with the Stop key.
Selects the procedure for the registered Group Sequence with the joystick and sets it with the Enter key.
If an unregistered number is designated, the number cannot be entered.
Completes the setting by pressing the Enter key on the selected position.
SPD is the speed the camera moves. (001~240°/sec)
※If the control range is restricted to ① Pan Limit and ② Tilt Limit, the operation is not allowed beyond the
controlled range. Exercise caution.
•Memorize
While the manual setting is memorized in the internal memory for at least 120 seconds after this function is activated,
the memory time varies depending on the PTZ operation.
DWL is the dwell time for the camera.(1~128 sec)
OVER means that the Memorize function is ended.
•Execute
※ When the control range is restricted to ① Pan Limit and ② Tilt Limit, it is memorized.
Starts Group monitoring.
•Clear
Sequence Setting
Deletes the Group monitoring data.
Set Preset
Pan Swing
Tilt Swing
Swing Focus Mode MANUAL
Group SEQ
Tour SEQ
PTZ Trace
Power On Resume
OFF
⑧ Power On Resume
When the power supply is resumed after suspension due to power failure, the Sequence operation set before the
power failure is maintained.
38
39
SPEED DOME CAMERA
SPEED DOME CAMERA
Download from Www.Somanuals.com. All Manuals Search And Download.
Camera setting
3) P/T Setting
P/T Setting Menu
Area Setting
P/T Setting
P/T Setting
Pan Limit
Position
Area 1
Pan Limit
Tilt Limit
Area Setting
Area Masking
Home Position
Smart P/T
Pan Limit
Area 2
Area 3
Area 4
Area 5
Area 6
Area 7
Area 8
Tilt Limit
Area Setting
Area Masking
Home Position
Smart P/T
On/Off
Press the
Enter key
Press the
Enter key
ON
ON
ON
ON
Auto Flip
Auto Flip
③ Area setting
① Pan Limit
Limits the range of movement in the PAN direction
Indicates the zone. Sets up to 8 areas.
•Position
•Area Name
Sets the range of movement. Determines the position measured from the left using the joystick and the Enter key. The
end position can be changed to the initial operation when power is resumed, depending on the setting position. This
represents normal operation.
Sets the area names. Up to 12 characters (English, Chinese, Numbers, etc.) can be entered using the joystick
and the Enter key. After input, put the area marks to SET using the joystick and press the Enter key. The setting
is then completed.
•ON/OFF
•Position
Limit starts working when ON is selected.
Sets the range of an area. Determines the position measured from the left using the joystick and the Enter key.
When the range of an area is overlapped, the area with the lower number indicates the overlapped area.
P/T Setting
Tilt Limit
Pan Limit
Position
•ON/OFF
Tilt Limit
On/Off
Sets the area display On or Off. This setting is valid from when a camera moves from the current area to another
area.
Area Setting
Area Masking
Home Position
Smart P/T
Press the
Enter key
Set the OSD Setting ON. When the OSD Setting is OFF, this function doesn’t work. The default is OFF.
ON
ON
Auto Flip
② Tilt Limit
Limits the range of movement in the Tilt direction.
•Position
Sets the range of movement. Determines the position measured from above using the joystick and the Enter key.
The end position can be changed to the initial operation when power is resumed depending on the setting position.
It is the normal operation.
•ON/OFF
Limit starts working when ON is selected.
40
41
SPEED DOME CAMERA
SPEED DOME CAMERA
Download from Www.Somanuals.com. All Manuals Search And Download.
Camera setting
Area Masking
Mask1
Mask2
Mask3
Mask4
Mask5
Mask6
Mask7
Mask8
P/T Setting
P/T Setting
Area Masking
Position
On/Off
Pan Limit
Tilt Limit
Area Setting
Pan Limit
Tilt Limit
Area Setting
Area Masking
Home Position
Area Masking
Home Position
Smart P/T
Auto Flip
Press the
Enter key
Press the
Enter key
Smart P/T
ON
ON
ON
ON
Auto Flip
④ Area Masking
⑥ Smart P/T
The area to be excluded from the monitoring operation is displayed in white. Up to 8 areas can be set to be in white.
Changes the speed of PAN and TILT according to the zoom factor. In Tele, Pan/Tilt becomes slow. In Wide, Pan/Tilt
becomes fast. One rotation in Tele and Wide takes about 15 seconds and 3 seconds respectively.
•Position
Select the scope of the display using the joystick and Enter Key.
•ON/OFF
Sets the area display function On or Off.
P/T Setting
Pan Limit
Tilt Limit
Area Setting
Area Masking
Home Position
P/T Setting
Home Position
Setting
Pan Limit
Tilt Limit
Area Setting
Area Masking
Home Position
Smart P/T
On/Off
Press the
Enter key
Smart P/T
Auto Flip
ON
ON
ON
ON
Auto Flip
⑦ Auto Flip
⑤ Home position
When Tilt is set to the 90°Limit using the joystick, and the setting is kept for a certain period, the Auto Flip
function makes PAN automatically rotate 180°and enables the Tilt area to be seen on the opposite side of the
screen.
If any motion is detected within a certain period, the camera moves to the preset position.
•Setting
Sets the preset position number to which a camera moves, and when it moves.
Preset Position : 01 ~ 128
With this function, the Tilt range is extended to 180°. For monitoring a moving object under a camera, activate
Auto Flip using the controller joystick, and you can monitor the object without the screen turning upside down
or reversing left to right.
Time: 00~60 Min. (00 means 30 seconds)
•ON/OFF
Sets the activation of this function.
42
43
SPEED DOME CAMERA
SPEED DOME CAMERA
Download from Www.Somanuals.com. All Manuals Search And Download.
Camera setting
4) OSD Setting
OSD Setting Menu
OSD Setting
OSD Setting
Camera ID
ON
ON
Camera ID
Camera Name
Preset Number
Preset Name
ON
ON
Camera Name
Preset Number
Preset Name
Sequence Status ON
Sequence Status ON
Area Name
OFF
Area Name
OFF
③ Preset Number
① Camera ID
Sets the preset numbers.
Sets the camera ID display.
Preset Name
On/Off
OSD Setting
Camera Name
On/Off
OSD Setting
Camera ID
Camera ID
Camera Name
Preset Number
Preset Name
Sequence Status ON
ON
ON
OFF
ON
ON
Edit
Camera Name
Preset Number
Preset Name
Sequence Status ON
Edit
Press the
Enter key
Press the
Enter key
Area Name
OFF
Area Name
OFF
0123456789
0123456789
For editing, move the
cursor to Edit and press
the Enter key.
For editing, move the
cursor to Edit and press
the Enter key.
ABCDEFGHIJKLMNOPQRSTUVWXYZ
abcdefghijklmnopqrstuvwxyz
！？▷◁▶◀【】(〈) 〉[]×＊＊÷＋－＝＿‖／○□
〜↑↓→←´˝,.·‥…；：¥＄¢£％＃＆
Chinese1 Back Space CLR SET
ABCDEFGHIJKLMNOPQRSTUVWXYZ
abcdefghijklmnopqrstuvwxyz
！？▷◁▶◀【】(〈) 〉[]×＊＊÷＋－＝＿‖／○□
〜↑↓→←´˝,.·‥…；：¥＄¢£％＃＆
Chinese1 Back Space CLR SET
② Camera Name
·Edit
Sets the camera names using up to 12 characters in English (or Chinese), numbers and special characters.
·On/Off
④ Preset Name
·Edit
Sets the preset names using up to 12 characters in English (or Chinese), numbers and special characters.
·On/Off
Set whether to display a preset name.
Set whether to display a camera name.
44
45
SPEED DOME CAMERA
SPEED DOME CAMERA
Download from Www.Somanuals.com. All Manuals Search And Download.
Camera setting
5) Alarm Setting
Alarm Setting Menu
Alarm Setting
OSD Setting
Alarm Enable
Alarm Input
Alarm Out
OFF
Camera ID
ON
ON
Camera Name
Preset Number
Preset Name
Motion Detection
Sequence Status
ON
Area Name
OFF
① Alarm Enable
To determine whether to activate the alarm, set to Alarm Enable.
·ON/OFF
⑤ Sequence Status
The alarm is activated with ON.
Sets the sequence groups
Alarm Setting
Alarm In[Mode P P/G/T No
OFF 1 OFF ***
Alarm Enable
Alarm Input
Alarm Out
OFF
INPUT1
OSD Setting
INPUT2 OFF 1 OFF ***
INPUT3 OFF 1 OFF ***
INPUT4 OFF 1 OFF ***
Camera ID
ON
ON
Camera Name
Preset Number
Preset Name
Press the
Enter key
Motion Detection
Sequence Status ON
OFF
② Alarm Input
Area Name
Sets the Alarm Input Mode, Priority and Alarm Activation Method
⑥ Area Name
·NC/NO/OFF
Selects NC, NO or OFF depending on the alarm sensor types.
Sets the area names
✽ With the area name off, the area can’t be displayed.
·1~4 (Priority)
Sets the priority of four alarm inputs and reacts to the alarm input in accordance with the priority.
·Preset/Group/Tour Number
Sets the Preset, Group or Tour for reaction to the alarm input.
In case of alarm, moves to the Preset/Group/Tour/Off corresponding to each alarm. If there are several
alarms in sequence, stays in the Preset/Group/ Tour position during the Dwell Time according to the input
sequence. The pattern- linked alarm then carries out the relevant pattern motion in sequence.
46
47
SPEED DOME CAMERA
SPEED DOME CAMERA
Download from Www.Somanuals.com. All Manuals Search And Download.
Camera setting
Alarm Output
Motion Detection
Alarm Setting
Alarm Setting
OUT1 SET
1 2 3 4 MD
MD Execute
Alarm Enable
Alarm Input
Alarm Out
OFF
Alarm Enable
Alarm Input
Alarm Out
OFF
OUT1 SET 1 2 3 4 MD
OUT1 TIME OFF 01 Sec
OUT2 TIME OFF 01 Sec
OUT1 OFF
Detect Area
Sensitivity
Preset No
WHOLE
12
Press the
Enter key
Press the
Enter key
Motion Detection
Motion Detection
***
OUT2 OFF
④ Motion Detection
③ Alarm Out
Motion Detection sets the motion detection function, areas to detect motion, and sensitivity of motion
detection. With Motion Detection on, the movements of an intruder can be detected. When motion is detected,
an alarm signal is sent to the Alarm Out.
Matches each alarm input to one of two Alarm Outs
·OUT1 SET/OUT2 SET
·MD Execute
Matches two alarm outputs to one of four alarm inputs and MD.
With Motion Detection On, moves to the preset position and then to On.
·Detect Area
·OUT1 TIME/OUT2 TIME
Sets the ON/OFF and operating time in units of seconds, minutes or hours for two alarm outputs.
(1~59 sec., 1~59 min., 1~59 hours)
Sets the area to detect.
- Whole : Detects motion on the whole screen.
·OUT1 OFF/OUT2 OFF
- Upper : Detects motion on the upper side of the screen
- Lower : Detects motion on the lower side of the screen
- Center : Detects motion on the center of the screen
When each alarm output is activated, select this function to forcibly release the alarm outputs. The alarm
output is then deactivated.
WHOLE
UPPER
LOWER
CENTER
·Sensitivity
Sets the detection sensitivity. The higher the number, the smaller the motion the sensor reacts to.
·Preset No
Sets the preset number to which to move a camera when motion is detected.
48
49
SPEED DOME CAMERA
SPEED DOME CAMERA
Download from Www.Somanuals.com. All Manuals Search And Download.
Camera setting
Main Menu
Camera Setting
Main Menu
Initialize
Cam Model =22NC
Cam Version=03.05
Dome Version=01.00
Con Protocol=SAMSUNG
Dome ID=001
Camera Setting
Sequence Setting
P/T Setting
OSD Setting
Alarm Setting
Initialize
Power On Reset
Factory Default Set
Camera Default Set
Sequence Setting
P/T Setting
OSD Setting
Alarm Setting
Initialize
Auto Refresh
7Days
Press the
Enter key
Press the
Enter key
Come Mode=DUPLEX
Factory Set=ON
Status
Status
6) Initialize Setting
7) Status
① Power On Reset
Displays the dome camera setting.
·Initialize a camera to the status prior to power supply
② Factory Default Set
Cam Model =22NC
Cam Version=03.05
Dome Version=01.00
Con Protocol=SAMSUNG
Dome ID=001
Mounted Camera Model
·Initialize to the factory default. Data such as preset is deleted. This function is used to initialize a variety of
settings. However, the digital zoom factor is not changed.
③ Camera Default Set
Mounted Camera S/W Version
Control Board S/W Version
Setting Protocol
Dome Camera ID
Communication Mode Setting Status
·When a single camera module is replaced due to a defect only in that camera, Camera Default Set is used to
set the replacement camera module to the setting of the previous camera.
④ Auto Refresh
Controller=Type1-9600
·Optimize the built- in electrical circuit and the status of fixtures and devices in a camera at a pre-determined
interval (operating intervals can be set).
This is used for keeping, maintaining and correcting the camera settings when a camera directly faces a
specific light source, or the setting is not preserved because the camera has been rotating left, right, up and
down in a specific area for a long time.
The default is 7 Days.
·OFF, 1~7Days
Auto Refresh won’t run when OFF is selected. Select between 1~7 Days, and Auto Refresh will run at the
selected intervals.
Auto Refresh takes less than about 10 seconds.
The message “Auto Refresh” disappears when the operation is completed.
50
51
SPEED DOME CAMERA
SPEED DOME CAMERA
Download from Www.Somanuals.com. All Manuals Search And Download.
Product Appearance and Installation Method
System configuration
● Dimension
1
2
3
253
128mm
SPD-2200
SPD-2200
207.5mm
125.6mm
● Installation Method
SVR-1630 (P/T Control Function)
Power AC 24V
Ceiling
Power AC 24V
SPD-2200
SPD-2200
Ceiling
Ceiling attached Type Installation
Installation Method for embedded Type
Control Line
※Other Installation Methods : You can use the camera in a variety of circumstances with accessories for outdoor
installation that you need to purchase separately. (See Page 17 and 20 for the
accessories that you can purchase)
Video Line
52
53
SPEED DOME CAMERA
SPEED DOME CAMERA
Download from Www.Somanuals.com. All Manuals Search And Download.
System configuration
Specifications
NTSC
PAL
Item
Image Sensor
SVR-1630
SVR-1630
1/4-inch Color Interline-Transfer CCD. 410.000pixel
16
M 1
M 2
M 3
M 4
TV Type
NTSC Type
811(V) × 508(H)
768(V) × 494(H)
15.734kHz
PAL Type
795(V) × 596(H)
752(V) × 582(H)
15.625kHz
Total Pixels
1
16
Effective Pixels
Horizontal Scanning Frequency
Vertical Scanning Frequency
Synchronization
Video Output
Receiver
SVR-1630
SVR-1630
16
59.94kHz
50.00kHz
Internal/External (AC Line Lock)
2
1.0p-p/75Ω
16
S/N Ratio
More than 48dB (AGC OFF)
Horizontal Resolution
Minimum Illumination
480TV lines
460TV lines
2.0Lux(Normal)/(@30IRE), 0.3Lux(Day & Night Mode)/(@30IRE)
0.03Lux(Slow-Shutter Mode)/(@30IRE)
3
Electronic Shutter
Slow-Shutter
Auto/Manual (1/60 ~ 1/10,000)
Auto/Manual (1/50 ~ 1/10,000)
ON(x2~x128Fields) /OFF
Backlight Compensation
White Balance
Flickerless control
Iris
ON/OFF
SCC-3000
10
15
Auto/AWC/Manual/Outdoor/Indoor
Shutter speed fixed (1/100)
Shutter speed fixed (1/120)
Auto/Manual (Iris fix mode)
Auto/Manual
Gain control
OSD Display
ON/OFF
Aperture Compensation
Focal Length
Level Controllable
3.9 ~ 85.8mm (Optic zoom 22x)
10x (Total 220x Zoom)
Power
Supply
20
Digital Zoom
Max. Focal Ratio
Covering Angle
Min. Focus Distance
Pan Rotation Angle
Pan Rotation
Wide 1:1.6 Tele 1:3.7
f=3.9mm 51.26°(H)×39.03°(V)f=85.8.mm 2.39°(H)×1.80°(V)
1.0m (Tele)~0.01m (Wide)
360° Continuous
Manual/Program
64
Pan Speed
Manual : 0.5°/S~120°/s (64 levels) Preset : 0.5°/s~240°/s (64 levels)
Control Line
Video Line
54
55
SPEED DOME CAMERA
SPEED DOME CAMERA
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
NTSC
PAL
Item
Pan Resolution
Pan Rotation Stop Accuracy
Tilt Rotation Angle
Tilt Rotation
0.05°
0.30°
+0°~ 90°(Auto Flip to 180°available by Controller)
Manual/Program
Tilt Speed
Manual : 0.5°/s~120°/s(64 levels) Preset : 0.5°/s~240°/s(64 levels)
Tilt Resolution
0.04°
Tilt Rotation Stop Accuracy
Preset Position
Area Masking
0.30°
Max.128 points
8points
Alarm
Alarm 4 Input
Alarm 2 OUT(Relay : NC/NO/COM,0.5A 125VAC,2A 30VDC Max)
0℃ ~ +50℃
Operating Temperature
Operating Humidity
Storage Temperature
Storage Humidity
Power Source, Voltage
Power Consumption
Dimensions
20% ~ 75% (No Condensation)
-20℃~ +60℃
20% ~ 95% (No Condensation)
AC 24V±10%
8 Watts in standby, 13 Watts in operation
ф128 ×207.5mm
Weight
Approx. 1.8kg
Environment
Indoor
: Indoor Housing (STH-160PI), Indoor embedded Housing (STH-128PE)
: Outdoor Housing (STH-160PO)
Outdoor
Wall Mount : STB-270PW
Ceiling Mount : STB-496PP
※ External Design and specification are subject to change without notice for improvement of product performance.
Cautions
●Samsung Techwin Inc. owns the copyright of this manual.
●This manual may not be reproduced in whole or in part, or transmitted in any form whatsoever, whether
electronic, mechanical or audio, without the written permission of Samsung Techwin.
●The contents of this manual may be revised for functional improvement at any time.
56
SPEED DOME CAMERA
Download from Www.Somanuals.com. All Manuals Search And Download.
|