LCD TV
LE19R8
Contact SAMSUNG WORLDWIDE
If you have any questions or comments relating to Samsung products,
please contact the SAMSUNG customer care centre.
Country
REPUBLIC OF IRELAND 0818 717 100
U.K 0870-SAMSUNG(726-7864)
Web Site
Customer Care Centre
Owner’s Instructions
Before operating the unit,
please read this manual thoroughly,
and retain it for future reference.
ON-SCREEN MENUS
PC DISPLAY
PICTURE IN PICTURE (PIP)
TELETEXT
Record your Model and Serial number here for future reference.
▪ Model _______________ ▪ Serial No. _______________
BN68-01169L-00
Download from Www.Somanuals.com. All Manuals Search And Download.
Precautions When Displaying a Still Image
A still image may cause permanent damage to the TV screen.
WARNINGS:
Image retention, commonly known as screen burn-in, can occur on most types of television if the same
image is displayed continuously. The most common causes of image retention are logos that remain
stationary on the TV screen. These logos are common on many programmes received via a Setop Box.
To reduce this risk, avoid displaying still images for long durations and lower the brightness or contrast
settings to decrease the intensity of the picture. Extended viewing of movies and programs in aspect
ratios that are different from the aspect ratio of the TV may cause image retention. Always endeavour
to avoid black borders top or bottom by using the zoom function. This will help eliminate the black
borders and fit the picture to the entire area of the screen. Using a video game console may cause
image retention and is not recommended. When using a PC input, avoid displaying still images for long
durations and reduce the brightness or contrast settings to decrease the intensity of the picture.
IMPORTANT:
Image retention issues are not covered by your Samsung® warranty.
•
•
•
Do not display a still image on the LCD panel for more than 2 hours as it can cause screen image
retention. This image retention is also known as "screen burn".
To avoid such image retention, reduce the degree of brightness and contrast of the screen when
displaying a still image.
Watching the LCD TV in 4:3 format for a long period of time may leave traces of borders
displayed on the left, right and center of the screen caused by the difference of light
emission on the screen. Playing a DVD or a game console may cause a similar effect to the
screen. Damages caused by the above effect are not covered by the Warranty.
Displaying still images from Video games and PC for longer than a certain period of time may produce
partial after-images. To prevent this effect, reduce the ‘brightness’ and ‘contrast’ when displaying still
images.
© 2007 Samsung Electronics Co., Ltd. All rights reserved.
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
CONNeCTING AND PRePARING YOuR TV
SeTTING The SOuND
List of Parts....................................................... 3
Viewing the Control Panel................................. 4
Viewing the Connection Panel.......................... 5
Viewing the Remote Control............................. 7
Installing Batteries in the Remote Control ........ 8
Switching On and Off........................................ 8
Placing Your Television in Standby Mode......... 8
Plug & Play ....................................................... 9
Changing the Sound Standard ....................... 22
Adjusting the Sound Settings.......................... 23
Setting the TruSurround XT (SRS TS XT) ...... 23
Connecting Headphones ................................ 24
Selecting the Sound Mode.............................. 24
Adjusting the Volume Automatically................ 24
Selecting the Internal Mute............................. 25
Listening to the Sound of the Sub Picture ...... 25
Resetting the Sound Settings to the Factory
Defaults........................................................... 26
SeTTING The ChANNelS
Storing Channels Automatically...................... 10
Storing Channels Manually..............................11
Setting the Channel Lists................................ 12
Activating the Child Lock ................................ 12
Sorting the Stored Channels........................... 13
Assigning Channels Names............................ 13
Fine Tuning Channel Reception ..................... 14
SeTTING The TIMe
Setting and Displaying the Current Time ........ 26
Setting the Sleep Timer .................................. 27
Switching the Television On and Off
Automatically .................................................. 27
FuNCTION DeSCRIPTION
SeTTING The PICTuRe
Choosing Your Language ............................... 28
Using Game Mode.......................................... 28
Blue Screen / Melody / Energy Saving ........... 29
Setting the Light Effect.................................... 29
Selecting the Source....................................... 30
Editing the Input Source Names..................... 30
Changing the Picture Standard....................... 15
Adjusting the Custom Picture ......................... 15
Changing the Colour Tone.............................. 16
Activating Backlight......................................... 16
Configuring Detailed Settings on the
Picture............................................................. 17
Changing the Picture Size .............................. 18
Freezing the Current Picture........................... 19
Selecting the Screen Mode............................. 19
Resetting the Picture Settings to the
Factory Defaults.............................................. 19
Digital NR / Active Colour / DNIe ................... 20
Viewing the Picture In Picture (PIP)................ 21
HDMI Black Level ........................................... 22
english - 1
Download from Www.Somanuals.com. All Manuals Search And Download.
uSING The DTV FeATuRe
uSING The TeleTexT FeATuRe
Previewing the DTV Menu System................. 31
Updating the Channel List Automatically ........ 32
Updating the Channel List Manually............... 32
Editing Your Favourite Channels .................... 33
Selecting Channel List.................................... 35
Displaying Programme Information ................ 35
Viewing the EPG (Electronic Programme
Teletext Feature.............................................. 46
Setting Up Your Remote Control..................... 47
Remote Control Codes ................................... 48
SeTTING The PC
Setting up Your PC Software
(Based on Windows XP)................................. 51
Display Modes ................................................ 51
Setting the PC................................................. 52
Setting the Home Theatre PC......................... 53
Guide) Information.......................................... 36
Using the Scheduled List................................ 37
Setting the Default Guide................................ 37
Viewing All Channels and Favourite
Channels......................................................... 38
Adjusting the Menu Transparency .................. 38
Setting up the Parental Lock........................... 39
Setting the Subtitle.......................................... 40
Setting the Subtitle Mode................................ 40
Selecting the Audio Format............................. 40
Selecting the Digital Text ................................ 41
Selecting the Time Zone (Spain only)............. 41
Viewing Product Information........................... 41
Checking the Signal Information..................... 42
Upgrading the Software.................................. 42
Viewing Common Interface............................. 43
Selecting the CI (Common Interface) Menu ... 43
Resetting......................................................... 44
Selecting the Preferred Language
ReCOMMeNDATIONS FOR uSe
How to Adjust the Stand ................................. 53
How to Adjust the Angle of the TV .................. 53
Installing the Wall Mount Kit............................ 54
Installing VESA compliant mounting devices.. 54
Using the Decoration Covers.......................... 54
Using the Anti-Theft Kensington Lock............. 55
Troubleshooting: Before Contacting
Service Personnel........................................... 55
Technical and Environmental Specifications .. 56
Warning! Important Safety Instructions
Wiring the Mains Power Supply Plug (UK Only)
Warranty Card
(Subtitle, Audio or Teletext)............................. 44
Preference ...................................................... 45
Symbol
Press
Important
Note
One-Touch
Button
english - 2
Download from Www.Somanuals.com. All Manuals Search And Download.
list of Parts
Please make sure the following items are included with your LCD TV.
If any items are missing, contact your dealer.
Remote Control &
Batteries
(AAA x 2)
Power Cord
Wall Mount kit
Owner’s Instructions
Registration Card
(Not available in all locations)
Decoration Cover
Cleaning Cloth
The stand and stand screw may not be included depending on the model.
english - ꢀ
Download from Www.Somanuals.com. All Manuals Search And Download.
Viewing the Control Panel
Front Panel buttons
Touch the each button to operate.
The product colour and shape may vary depending on the model.
1
SOuRCe
4
Toggles between all the available input
sources (TV, Ext., AV, S-Video, Component,
PC, HDMI, DTV). In the on-screen menu, use
this button as you use the eNTeR/OK button
on the remote control.
Press to change channels.
In the on-screen menu, use the
buttons as you use the
the remote control.
▲
and
▼
buttons on
(Without the Remote Control, you can turn on
the TV by using the Channel buttons.)
2
3
MeNu
Press to see an on-screen menu of your TV’s
features.
In case of DTV mode, the DTV menu appears.
5
(Power)
Press to turn the TV on and off.
Power Indicator
Blinks and turns off when the power is on and
lights up in stand-by mode.
Press to decrease or increase the volume.
In the on-screen menu, use the
6
7
Remote Control Sensor
Aim the remote control towards this spot on
the TV.
buttons as you use the
the remote control.
◄
and
►
buttons on
Speakers
english - ꢁ
Download from Www.Somanuals.com. All Manuals Search And Download.
Viewing the Connection Panel
3
4
[Side Panel Jacks]
1
2
5
PC IN
PC
DVI IN
AUDIO
HDMI/DVI IN
AUDIO
6
EX-LINK
AUDIO
VIDEO S-VIDEO
AV IN
Power Input
!
0
98
7
The product colour and shape may vary depending on the model.
Whenever you connect an external device to your TV, make sure that power on the unit is turned off.
When connecting an external device, match the colour of the connection terminal to the cable.
1 Connecting Set-Top Box, VCR or DVD
Input
Output
Connector
Video
o
Audio (L/R)
RGB
o
Video + Audio (L/R)
EXT
o
Only TV or DTV output is available.
-Inputs or outputs for external devices, such as VCR, DVD, video game device or video disc players.
2 Connecting hDMI
- Supports connections between HDMI-connection-enabled AV devices (Set-Top Boxes, DVD players).
- No additional Audio connection is needed for an HDMI to HDMI connection.
What is HDMI?
- “High Definition Multimedia interface” allows the transmission of high definition digital video data and
multiple channels of digital audio (5. 1 channels).
- The HDMI/DVI IN terminal supports DVI connection to an extended device with the appropriate
cable (not supplied). The difference between HDMI and DVI is that the HDMI device is smaller in
size, has the HDCP(High Bandwidth Digital Copy Protection) coding feature installed, and supports
multi - channel digital audio.
You should use the DVI-to-HDMI cable or DVI-HDMI Adapter for the connection, and the
“R - AUDIO - L” terminal on DVI for sound output.
- When connecting this product via HDMI or DVI to a Set Top Box, DVD Player or Games Console
etc, make sure that it has been set to a compatible video output mode as shown in the table below.
Failure to observe this may result in picture distortion, image breakup or no picture.
english - ꢂ
Download from Www.Somanuals.com. All Manuals Search And Download.
Supported modes for HDMI/DVI and Component
480i
X
X
480p
X
O
576i
X
X
576p
O
X
720p
O
O
1080i
O
O
HDMI/DVI 50Hz
HDMI/DVI 60Hz
Component
O
O
O
O
O
O
- The HDMI/DVI IN jack support PC connection.
3 Connecting Computer
- Connect the D- Sub cable (optional) to "PC (PC IN)" on the rear of your set and the other end to
the Video Card of your computer.
- Connect the stereo audio cable (optional) to "AUDIO (PC IN)" on the rear of your set and the other
end to "Audio Out" of the sound card on your computer.
4 Connecting an Aerial or Cable Television Network
To view television channels correctly, a signal must be received by the set from one of the following
sources:
- An outdoor aerial / A cable television network / A satellite network
5 Connecting CI (Common Interface) CARD
- When not inserting "CI CARD" in some channels,"Scrambled Signal" is displayed on the screen.
- The pairing information containing a telephone number, CI CARD ID, Host ID and other information
will be displayed in about 2~3 minutes. If an error message is displayed, please contact your
service provider.
- When the channel information configuration has finished, the message "Updating Completed" is
displayed, indicating that the channel list is now updated.
You must obtain a CI CARD from a local cable service provider.
Remove the CI CARD by carefully pulling it out with your hands since dropping the CI CARD
may cause damage to it.
Insert the CI-Card in the direction marked on it.
7 Connecting external A/V Devices
- Connect RCA or S-VIDEO cable to an appropriate external A/V device such as VCR, DVD or
Camcorder.
- Connect RCA audio cables to "R - AUDIO - L" on the rear of your set and the other ends to corre
sponding audio out connectors on the A/V device.
- Headphone may be connected to the headphone output (6) on the rear of your set. While the
head phone is connected, the sound from the built-in speakers will be disabled.
8 DIGITAl AuDIO OuT (OPTICAl)
- Connect to a Digital Audio Component.
9 ex-lINK
- Service connection for qualified service engineer.
0 Connecting Component Devices (DTV/DVD)
- Connect component video cables (optional) to component connector ("PR", "PB", "Y") on the rear of
your set and the other ends to corresponding component video out connectors on the DTV or DVD.
- If you wish to connect both the Set-Top Box and DTV (or DVD), you should connect the Set-Top Box
to the DTV (or DVD) and connect the DTV (or DVD) to component connector ("PR", "PB", "Y") on your
set.
- The PR, PB and Y connectors on your component devices (DTV or DVD) are sometimes labeled Y,
B-Y and R-Y or Y, Cb and Cr.
- Connect RCA audio cables (optional) to "R - AUDIO - L" on the rear of your set and the other ends to
corresponding audio out connectors on the DTV or DVD.
- This LCD TV displays its optimum picture resolution in 720p mode.
- This LCD TV displays its maximum picture resolution in 1080i mode.
! Kensington lock
- The Kensington lock (optional) is a device used to physically fix the system when used in a public
place.
- If you want to use a locking device, contact the dealer where you purchased the TV.
- The place of the Kensington Lock may be different depending on its model.
english - ꢃ
Download from Www.Somanuals.com. All Manuals Search And Download.
Viewing the Remote Control
1 Selects a target device to be a Selects the HDMI mode
controlled by the Samsung
remote control (TV, DVD,
STB, CABLE, VCR)
directly.
b P : Next channel
P
: Previous channel
(Refer to page 47~50)
c Exit the OSD
2 Television Standby button
d Control the cursor in the
3 Number buttons for direct
menu
channel access
e Use to see information on
4
One/Two-digit channel
selection
the current broadcast
g Colour buttons: Press to add
or delete channels and to
store channels to the favorite
channel list in the “Channel
List” menu.
5 It display "Channel List"
on the screen.
6 Selects the TV and DTV
mode directly
7 VCR/DVD Functions
Rewind, Stop, Play/Pause,
Fast/Forward
h Picture-In-Picture On / Off
i Digital subtitle display
j Picture effect selection
k Picture freeze
8
Volume increase
Volume decrease
9 Temporary sound switch-off
l When your remote does not
work, change the batteries
and press the "RESET"
button for 2-3 seconds before
use.
0 Menu display and
change confirmation
! Returns to the previous
menu
Teletext Functions
@ SRS TS XT selection
6 Exit from the teletext display
0 Teletext index
# Electronic Program Guide
(EPG) display
$ Teletext size selection
$ Picture size selection
* Teletext mode selection
% Sound effect selection
(LIST/FLOF)
^
Adjusts 5 separate devices
- TV, DVD, STB, CABLE or
( Teletext sub page
VCR
.
b P : Teletext next page
P
: Teletext previous page
& When pressing this button, a
number of buttons on the
remote control (e.g. Selects
a target device, volume,
channel buttons) light up
for a few seconds and then
turn off to save power. This
function is to conveniently
use the remote control at
night or when dark.
c Teletext cancel
e Teletext reveal
f Alternately select Teletext,
Double or Mix.
g Fastext topic selection
h Teletext hold
j Teletext store
* Available source selection
( Previous channel
) DTV menu display
The performance of the remote control may be affected by bright light.
This is a special remote control for the visually impaired and has Braille points on the Power,
Channel, STOP, PlAY/PAuSe and Volume buttons.
english - ꢄ
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing Batteries in the Remote Control
1. Lift the cover at the back of the remote control upward as shown in the
figure.
2. Install two AAA size batteries.
Make sure to match the "+" and "–" ends of the batteries with the
diagram inside the compartment.
ꢀ. Replace the cover.
Remove the batteries and store them in a cool, dry place if you won’t be
using the remote control for a long time. The remote control can be used
up to about 23 feet from the TV.
(Assuming typical TV usage, the batteries last for about one year.)
If the remote control doesn’t work, check the following:
1. Is the TV power on?
2. Are the plus and minus ends of the batteries reversed?
3. Are the batteries drained?
4. Is there a power outage or is the power cord unplugged?
5. Is there a special fluorescent light or neon sign nearby?
Switching On and Off
The mains lead is attached to the rear of your set.
1. Plug the mains lead into an appropriate socket.
The standby indicator lights up on the front of the set.
2. Press the button on the front of the set.
You also can press the POWeR button or the TV/DTV button on the remote control to turn
the TV on.
The programme that you were watching last is reselected automatically.
ꢀ. Press the numeric button (0~9) or channel up/down ( / ) button on the remote control or
button on the right side of the set.
When you switch the set on for the very first time, you will be asked to choose language in
which the menus are to be displayed.
ꢁ. To switch your set off, press the POWeR button again.
Placing Your Television in Standby Mode
Your set can be placed in standby mode in order to reduce the power consumption. The standby
mode can be useful when you wish to interrupt viewing temporarily (during a meal, for example).
1. Press the POWeR button on the remote control.
The screen is turned off and a red standby indicator appears on the front of your set.
2. To switch your set back on, simply press the POWeR , numeric buttons (0~9), TV/DTV button or
channel up/down ( / ) button again.
Do not leave your set in standby mode for long periods of time (when you are away on holiday,
for example). It is best to unplug the set from the mains and aerial.
english - ꢅ
Download from Www.Somanuals.com. All Manuals Search And Download.
Plug & Play
When the TV is initially powered on, several basic settings
proceed automatically and subsequently. The following
settings are available.
Plug & Play
Any functions related to Digital TV (DVB) will only work in coun-
tries or areas where DVB-T (MPEG2) digital terrestrial signals
are broadcasted. Please confirm with your local dealer if you can
receive DVB-T signals. Although this TV set follows the DVB-T
specification, maintaining compatibility with the future coming
DVB-T digital terrestrial broadcasts is not guaranteed. Several
functions may not be available in some countries.
Start Plug & Play.
OK
enter
exit
1. Press the POWeR button on the remote control.
The message "Start Plug & Play" is displayed with "OK" selected.
2. Select the appropriate language by pressing the
▲
or
▼
button.
Press the eNTeR/OK button to confirm your choice.
ꢀ. Press the or button to select “Shop” or “Home”, then the eNTeR/OK button.
◄
►
We recommend setting the TV to Home mode for the best picture in your home environment.
Shop mode is only intended for use in retail environments.
If the unit is accidentally set to Shop mode and you want to return to Dynamic (Home) mode,
press the Volume button and then hold down the MeNu button for five seconds on the side
panel of the TV.
ꢁ. The message "Check antenna input." is displayed with "OK" selected. Press the eNTeR/OK button.
Please check that the antenna cable is connected correctly.
ꢂ. Select the appropriate country by pressing the
▲
or
▼
button.
Press the eNTeR/OK button to confirm your choice.
ꢃ. The message “Some DTV functions may not be available. Digital Scan?" is displayed.
Press the ◄ or ► button to select “Yes” or “No”, then press the eNTeR/OK button.
Yes
:
First an ATV search is performed and then a DTV ch. auto search is performed.
No
:
Only an ATV search is performed.
This function is supported for all countries except for the following 6 countries: the United
Kingdom, Austria, France, Germany, Italy and Spain.
ꢄ. The "Auto Store" menu is displayed with the "Start" selected. Press the eNTeR/OK button.
The channel search will start and end automatically.
The DTV channel scan menu appears and the DTV channel is automatically updated.
If the DTV channel is updated, the Source in the source list of the Input menu is automatically
changed to DTV. After all the available channels are stored, the "Clock Set" menu appears.
Press the eNTeR/OK button at any time to interrupt the memorization process.
For detailed descriptions about DTV channel update, refer to page 32 of this manual.
After all the available digital channels are stored, the screen to select a time zone is displayed
depending on the country.
ꢅ. Press the eNTeR/OK button.
Select the "Month", "Day", "Year", "Hour" or "Minute" by pressing the ◄ or ► button.
Set the "Month", "Day", "Year", "Hour" or "Minute" by pressing the ▲ or ▼ button.
You can also set the "Month", "Day", "Year", "Hour" and "Minute" by pressing the number buttons on
the remote control.
ꢆ. Press the eNTeR/OK button to confirm your setting. The message "Enjoy your viewing" is displayed.
When you have finished, press the eNTeR/OK button.
Even if the eNTeR/OK button is not pressed, the message will automatically disappear after several
seconds.
language: Select your language.
Country: Select your country.
Auto Store: Automatically scans for and stores channels available in the local area.
Clock Set: Sets the current time for the TV clock.
english - ꢆ
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup
If you want to reset this feature...
TV
Plug & Play
language
Time
: english
1. Press the MeNu button to display the menu.
Game Mode
Blue Screen
Melody
: Off
: Off
: Medium
Press the
▲
or
▼
button to select "Setup", then press the
eNTeR/OK button.
PC
home Theatre PC
light effect
energy Saving
2. Press the eNTeR/OK button again, to select "Plug & Play".
:
In Watching TV
: Off
hDMI Black level : low
ꢀ. The message "Start Plug & Play" is displayed.
PIP
(Refer to page 9)
Move
enter
Return
Plug & Play
Start Plug & Play.
OK
enter
Return
Channel
TV
Country
:
Belgium
Auto Store
Manual Store
Channel Manager
Sort
- Storing Channels Automatically
- Storing Channels Manually
Name
Fine Tune
Move
enter
Return
Storing Channels Automatically
You can scan for the frequency ranges available to you (and availability depends on your country).
Automatically allocated programme numbers may not correspond to actual or desired programme
numbers. however, you can sort numbers manually and clear any channels you do not wish to watch.
1. Press the MeNu button to display the menu.
Press the
2. Press the eNTeR/OK button to select "Country".
ꢀ. Select the appropriate country by pressing the
Press the eNTeR/OK button to confirm your choice.
▲
or
▼
button to select "Channel", then press the eNTeR/OK button.
▲
or
▼
button.
Even though you have changed the country setting in this menu, the country setting for DTV is not
changed. (Refer to page 32)
ꢁ. Press the
▲
or
▼
button to select "Auto Store", then press the eNTeR/OK button.
ꢂ. Press the eNTeR/OK button.
The TV will begin memorizing all of the available channels.
Press the eNTeR/OK button at any time to interrupt the memorization process and return to the
"Channel" menu.
ꢃ. After all the available channels are stored, the "Sort" menu appears. (Refer to page 13)
english - 10
Download from Www.Somanuals.com. All Manuals Search And Download.
Storing Channels Manually
You can store up to 100 channels, including those received via cable networks.
When storing channels manually, you can choose:
Whether or not to store each of the channels found.
The programme number of each stored channel which you wish to identify.
1. Press the MeNu button to display the menu.
Press the ▲ or ▼ button to select "Channel", then press the eNTeR/OK button.
2. Press the ▲ or ▼ button to select "Manual Store", then press the eNTeR/OK button.
ꢀ. Press the eNTeR/OK button to select "Programme".
ꢁ. To assign a programme number to a channel, find the correct number by pressing the ▲ or ▼
button and then press the eNTeR/OK button.
You can also set a programme number by pressing number buttons on the remote control.
ꢂ. Press the ▲ or ▼ button to select "Colour System", then press the eNTeR/OK button.
ꢃ. Select the colour standard required by pressing the ▲ or ▼ button then, press the eNTeR/OK button.
ꢄ. Press the ▲ or ▼ button to select "Sound System", then press the eNTeR/OK button.
ꢅ. Select the sound standard required by pressing the ▲ or ▼ button, then press the eNTeR/OK button.
If there is an abnormal sound or no sound, re-select the sound system required.
ꢆ. If you know the number of the channel to be stored, press the ▲ or ▼ button to select "Channel".
Press the eNTeR/OK button. Select C (Air channel) or S (Cable channel) by pressing the ▲ or ▼
button. Press the ► button to select channel.
Select the required number by pressing the ▲ or ▼ button and then press the eNTeR/OK button.
Channel mode: P (Programme mode), C (Air channel mode), S (Cable channel mode)
You can also set a channel number by pressing number buttons on the remote control.
10. If you do not know the channel numbers, press the ▲ or ▼ button to select "Search".
Press the eNTeR/OK button. Search by pressing the ▲ or ▼ button and then press the eNTeR/OK button.
11. Press the ▲ or ▼ button to select "Store". Press the eNTeR/OK button to select "OK".
12. Repeat steps ꢀ to 11 for each channel to be stored.
Programme: Selects a program number for the channel.
Colour System: Sets the colour supporting system.
Sound System: Sets the sound supporting system.
Channel: Selects a channel.
Search: Scans for the frequency value for the channel.
Store: Saves your settings.
english - 11
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the Channel lists
Set the channels according to your preference.
Channel list
You can easily delete, add or lock the channel you want.
P
1
Cꢀ
1 / 10
1. Press the MeNu button to display the menu.
Press the
▲
or
▼
button to select "Channel", then press the
Prog.
eNTeR/OK button.
0
1
2
ꢀ
ꢁ
ꢂ
C--
Cꢀ
2. Press the or
▲
▼
button to select "Channel Manager",
BBC 1
Cꢄꢁ
Cꢄꢂ
Cꢄꢃ
then press the eNTeR/OK button.
ꢀ. Press the eNTeR/OK button again, to select "Channel List".
ꢁ. Press the
►
▲
button to select " " line.
ꢃ
ꢄ
ꢅ
Sꢀ
Sꢁ
Sꢃ
ꢂ. Press the
or ▼ button to select the undesired channel,
then press the eNTeR/OK button to cancel.
ꢃ. Repeat steps 5 for each channel to be selected or canceled
ꢄ. Press the exIT button to exit.
ꢆ
Sꢄ
Add
lock
Move
Page
enter
Return
"
" is active when "Child Lock" is selected to "On".
You can select these options by simply pressing the Ch lIST
button on the remote control
Activating the Child lock
This feature allows you to prevent unauthorized users, such
as children, from watching unsuitable programmes by muting
out video and audio.
Channel Manager
TV
Channel list
Child lock
:
Off
On
Child lock cannot be released using the buttons on the side.
Only the remote control can release the Child lock setting,
so keep the remote control away from children.
1. Press the MeNu button to display the menu.
Press the
▲
or
▼
button to select "Channel", then press the
Move
enter
Return
eNTeR/OK button.
Channel list
2. Press the or
▲
▼
button to select "Channel Manager",
then press the eNTeR/OK button.
ꢀ. Press the or button to select "Child Lock", then press
the eNTeR/OK button.
ꢁ. Press the or
eNTeR/OK button.
ꢂ. Press the or
P
1
Cꢀ
1 / 10
▲
▼
Prog.
0
1
2
ꢀ
ꢁ
ꢂ
C--
▲
▼
button to select "On". Press the
button to select "Channel List",
Cꢀ
BBC 1
Cꢄꢁ
Cꢄꢂ
Cꢄꢃ
▲
▼
then press the eNTeR/OK button.
ꢃ. Press the
►
▲
button to select " " line.
or button to select the channels you want to
ꢃ
ꢄ
ꢅ
Sꢀ
Sꢁ
Sꢃ
ꢄ. Press the
▼
lock, then press the eNTeR/OK button.
ꢅ. Repeat steps ꢄ for each channel to be locked or unlocked.
ꢆ. Press the exIT button to exit.
ꢆ
Sꢄ
Add
lock
Move
Page
enter
Return
Select "On" or "Off" in "Child Lock" to easily turn the channels
which selected on " " to be active or inactive.
english - 12
Download from Www.Somanuals.com. All Manuals Search And Download.
Sorting the Stored Channels
You can exchange the numbers of two channels, in order to:
TV
Channel
Country
:
Belgium
Modify the numeric order in which the channels have
been automatically stored.
Give easily remembered numbers to the channels
that you watch most often.
Auto Store
Manual Store
Channel Manager
Sort
Name
Fine Tune
1. Press the MeNu button to display the menu. Press the
▲
or
▼
button to select "Channel", then press the eNTeR/OK button.
Move
enter
Return
2. Press the or button to select "Sort", then press the
eNTeR/OK button.
ꢀ. Select the channel number that you wish to change by press
▲
▼
TV
Sort
Prog.
Ch.
Name
ꢀ0
ꢀ1
ꢀ2
ꢀꢀ
ꢀꢁ
ꢀꢂ
ꢀꢃ
ꢀꢄ
ꢀꢅ
ꢀꢆ
Cꢂ0
C2ꢀ
C1ꢃ
Cꢀ2
Cꢀꢀ
Cꢀꢁ
Cꢀꢂ
Cꢀꢃ
Cꢀꢄ
Cꢀꢅ
-----
-----
-----
-----
-----
-----
-----
-----
-----
-----
ing the
button.
▲
or
▼
button repeatedly. Press the eNTeR/OK
The selected channel number and name are moved to
right side.
ꢁ. Press the
▲
or
▼
button to move to the position in which you
Move
enter
Return
would like to change and then press the eNTeR/OK button.
The selected channel is exchanged with the one
previously stored to the chosen number.
ꢂ. Repeat steps ꢀ to ꢁ for another channel to be sorted.
ꢃ. Press the exIT button to exit.
Assigning Channels Names
TV
Channel
Channel names will be assigned automatically when channel
information is broadcast. These names can be changed,
allowing you to assign new names.
Country
:
Belgium
Auto Store
Manual Store
Channel Manager
Sort
Name
Fine Tune
1. Press the MeNu button to display the menu.
Press the
eNTeR/OK button.
▲
or
▼
button to select "Channel", then press the
button to select "Name", then press the
2. Press the or
eNTeR/OK button.
ꢀ. If necessary, select the channel to be assigned to a new
▲
▼
Move
enter
Return
TV
Name
Name
Prog.
Ch.
name by pressing the
button.
▲
or
▼
button. Press the eNTeR/OK
ꢀ0
ꢀ1
ꢀ2
ꢀꢀ
ꢀꢁ
ꢀꢂ
ꢀꢃ
ꢀꢄ
ꢀꢅ
ꢀꢆ
Cꢂ0
C2ꢀ
C1ꢃ
Cꢀ2
Cꢀꢀ
Cꢀꢁ
Cꢀꢂ
Cꢀꢃ
Cꢀꢄ
Cꢀꢅ
-----
-----
-----
-----
-----
-----
-----
-----
-----
-----
The selection bar is displayed around the name box.
ꢁ.
To...
Press the...
▲ or ▼ button
► button
Select a letter, number or symbol
Move on the next letter
Move back the previous letter
Confirm the name
Move
enter
Return
◄ button
eNTeR/OK button
The characters available are : Letters of the alphabet (A~Z) / Numbers (0~9) /
Special characters (space, /, *, -, +)
ꢂ. Repeat steps ꢀ to ꢁ for each channel to be assigned to a new name.
ꢃ. Press the exIT button to exit.
english - 1ꢀ
Download from Www.Somanuals.com. All Manuals Search And Download.
Fine Tuning Channel Reception
use fine tuning to manually adjust a particular channel for
TV
Channel
Country
:
Belgium
optimal reception.
Auto Store
Manual Store
Channel Manager
Sort
1. Use the number buttons to directly select the channel that
you want to fine tune.
Name
Fine Tune
2. Press the MeNu button to display the menu.
Press the
▲
or
▼
button to select "Channel", then press the
eNTeR/OK button.
Move
enter
Return
ꢀ. Press the or
▲
▼
button to select "Fine Tune", then press
the eNTeR/OK button.
Fine Tune
ꢁ. Press the
◄
or
►
button to adjust the fine tuning.
P 1
Press the eNTeR/OK button.
0
ꢂ. Press the exIT button to exit.
Reset
Save
Fine tuned channels that have been saved are marked with
an asterisk "*" on the right-hand side of the channel number
in the channel banner. And the channel number turns red.
Adjust
Return
To reset the fine-tuning, select "Reset" by pressing the
▲
or
▼
button and then press the eNTeR/OK button.
english - 1ꢁ
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the Picture Standard
You can select the type of picture which best corresponds to
your viewing requirements.
TV
Picture
Dynamic
Mode
:
100
ꢁꢂ
ꢄꢂ
ꢂꢂ
R ꢂ0
Contrast
Brightness
Sharpness
Colour
1. Press the MeNu button to display the menu.
Press the eNTeR/OK button, to select "Picture".
Tint
G ꢂ0
:
Colour Tone
Detailed Settings
Backlight
Size
Cool1
2. Press the eNTeR/OK button again to select "Mode".
:
:
10
Auto Wide
ꢀ. Press the
▲
or
▼
button to select the desired picture effect.
Screen Mode
More
: 1ꢃ : ꢆ
Press the eNTeR/OK button.
Move
enter
Return
ꢁ. Press the exIT button to exit.
TV
Picture
Mode
:
Dynamic
Dynamic
Dynamic: Selects the picture for high-definition
Contrast
Brightness
Sharpness
Colour
Standard
Movie
100
ꢁꢂ
in a bright room.
ꢄꢂ
ꢂꢂ
R ꢂ0
Tint
G ꢂ0
:
Standard: Selects the picture for optimum display
Colour Tone
Detailed Settings
Backlight
Size
Cool1
in a normal environment.
:
:
10
Auto Wide
Movie: Selects the picture for comfortable display
Screen Mode
More
: 1ꢃ : ꢆ
in a dark room.
Move
enter
Return
The "Picture" mode must be adjusted separately for each
input source.
You can return to the factory defaults picture settings by
selecting the "Reset".
(Refer to "Resetting the Picture Settings to the Factory
Defaults" on page 19)
You can also press the
P.MODe button on the remote
control to select one of the
picture settings.
Adjusting the Custom Picture
Your set has several settings which allow you to control
picture quality.
TV
Picture
Dynamic
Mode
:
100
ꢁꢂ
ꢄꢂ
ꢂꢂ
R ꢂ0
Contrast
Brightness
Sharpness
Colour
1. To select the desired picture effect, follow the
"Changing the Picture Standard" instructions number 1 to 3.
Tint
G ꢂ0
:
Colour Tone
Detailed Settings
Backlight
Size
Cool1
2. Press the
▲
or
▼
button to select a particular item. Press the
:
:
10
eNTeR/OK button.
Auto Wide
Screen Mode
More
: 1ꢃ : ꢆ
ꢀ. Press the or
◄
►
button to decrease or increase the value of
a particular item. Press the eNTeR/OK button.
Move
enter
Return
ꢁ. Press the exIT button to exit.
Contrast: Adjusts the lightness and darkness between objects and the background.
Brightness: Adjusts the brightness of the whole screen.
Sharpness: Adjusts the outline of objects to either sharpen them or make them more dull.
Colour: Adjusts the colours, making them lighter or darker.
Tint: Adjusts the colour of objects, making them more red or green for a more natural look.
The adjusted values are stored according to the selected Picture mode.
In PC Mode, Only "Contrast" and "Brightness" can be adjusted.
"Tint" is only activated for NTSC broadcasting, DTV broadcasting, and Component modes.
english - 1ꢂ
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the Colour Tone
You can select the most comfortable colour tone to your
eyes.
TV
Picture
Dynamic
Mode
:
100
ꢁꢂ
ꢄꢂ
ꢂꢂ
R ꢂ0
Contrast
Brightness
Sharpness
Colour
1. To select the desired picture effect, follow the
"Changing the Picture Standard" instructions number 1 to 3.
(On page 15)
Tint
G ꢂ0
:
Colour Tone
Detailed Settings
Backlight
Size
Cool1
:
:
10
2. Press the ▲ or ▼ button to select "Colour Tone", then press
Auto Wide
the eNTeR/OK button.
Screen Mode
More
: 1ꢃ : ꢆ
ꢀ. Press the ▲ or ▼ button to select the desired colour tone
Move
enter
Return
setting. Press the eNTeR/OKbutton.
TV
Picture
ꢁ. Press the exIT button to exit
Mode
:
Dynamic
Contrast
Brightness
Sharpness
Colour
100
ꢁꢂ
ꢄꢂ
ꢂꢂ
Cool2: Makes the colour temperature bluer than "Cool1"
menu.
Tint
G ꢂ0
R ꢂ0
Colour Tone
Detailed Settings
Backlight
Size
Screen Mode
More
:
CoClool 2
Cool 1
Cool1: Makes whites bluish.
Normal: Keeps whites white.
Warm1: Makes whites reddish.
Warm2: Makes the colour temperature redder than
"Warm1" menu.
Normal
:
:
Warm 1
Warm 2
: 1ꢃ : ꢆ
Move
enter
Return
The adjusted values are stored according to the selected "Picture" mode.
When the picture mode is set to "Dynamic" or "Standard", "Warm1" and "Warm2" cannot be
selected.
Activating Backlight
You can adjust the screen brightness by adjusting the lCD
TV
Picture
Dynamic
backlight brightness. (0~10)
Mode
:
100
ꢁꢂ
ꢄꢂ
ꢂꢂ
R ꢂ0
Contrast
Brightness
Sharpness
Colour
1. To select the desired picture effect, follow the
"Changing the Picture Standard" instructions number 1 to 3.
(On page 15)
Tint
G ꢂ0
:
Colour Tone
Detailed Settings
Backlight
Size
Cool1
:
:
10
2. Press the ▲ or ▼ button to select “Backlight”, then press the
Auto Wide
eNTeR/OK button.
Screen Mode
More
: 1ꢃ : ꢆ
ꢀ. Press the ◄ or ► button to decrease or increase the value of
Move
enter
Return
a particular item.
ꢁ. Press the eNTeR/OK button.
Backlight
10
Press the exIT button to exit.
The adjusted values are stored according to the selected
"Picture" mode.
Adjust
Return
english - 1ꢃ
Download from Www.Somanuals.com. All Manuals Search And Download.
Configuring Detailed Settings on the Picture
You can set detailed picture settings.
TV
Picture
Mode
:
Movie
ꢅ0
ꢁꢂ
10
ꢂꢀ
R ꢂ0
1. Press the MeNu button to display the menu.
Contrast
Brightness
Sharpness
Colour
2. Press the eNTeR/OK button, to select "Picture".
Tint
G ꢂ0
:
Colour Tone
Detailed Settings
Backlight
Size
Warm2
ꢀ. Press the ▲ or ▼ button to select "Detailed Settings", then
press the eNTeR/OK button.
:
:
ꢂ
Auto Wide
Screen Mode
More
: 1ꢃ : ꢆ
ꢁ. Select the required option by pressing the ▲ or ▼ button,
then press the eNTeR/OK button.
Move
enter
Return
Available options: Black Adjust, Dynamic Contrast, Gamma,
TV
Detailed Settings
White Balance, My Colour Control, Edge Enhancement,
Colour Space.
Black Adjust
Dynamic Contrast
Gamma
White Balance
My Colour Control
edge enhancement
Colour Space
:
:
:
Off
Off
0
ꢂ. When you are satisfied with your setting, press the
:
:
Off
Auto
eNTeR/OK button.
ꢃ. Press the exIT button to exit.
When the picture mode is set to "Movie" or "Standard",
"Detailed Settings" can be selected.
Move
enter
Return
If "DNIe" is Off, the "Detailed Settings" cannot be selected
when the "Picture" mode is in "Standard" mode.
Black Adjust: Off/low/Medium/high
You can directly select the black level on the screen to adjust the screen depth.
Dynamic Contrast: Off/low/Medium/high
You can adjust the screen contrast so that the optimal contrast is provided.
Gamma: -ꢀ ~ +ꢀ
You can adjust the middle brightness of pictures.
Press the ◄ or ► button until you reach the optimal setting.
White Balance: R-Offset/G-Offset/B-Offset/R-Gain/G-Gain/B-Gain/Reset
You can adjust the colour temperature for more natural picture colours.
R-Offset/G-Offset/B-Offset/R-Gain/G-Gain/B-Gain: Changing the adjustment value will refresh the
adjusted screen.
Select the required option by pressing the ▲ or ▼ button, then press the eNTeR/OK button.
Press the ◄ or ► button until you reach the optimal setting.
Reset: The previously adjusted white balance will be reset to the factory defaults.
My Colour Control: Pink/Green/Blue/White/Reset
This setting can be adjusted to suit your personal preferences.
Pink/Green/Blue/White: Changing the adjustment value will refresh the adjusted screen.
Select the required option by pressing the ▲ or ▼ button, then press the eNTeR/OK button.
Press the ◄ or ► button until you reach the optimal setting.
Reset: The previously adjusted colours will be reset to the factory defaults.
edge enhancement: Off/On
You can emphasize object boundaries.
Colour Space: Auto/Wide
You can set the colour reproduction space for the input signal to Auto or Wide.
english - 1ꢄ
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the Picture Size
TV
You can select the picture size which best corresponds to
your viewing requirements.
Picture
Dynamic
Mode
:
100
ꢁꢂ
ꢄꢂ
ꢂꢂ
R ꢂ0
Contrast
Brightness
Sharpness
Colour
1. Press the MeNu button to display the menu.
Press the eNTeR/OK button, to select "Picture".
Tint
G ꢂ0
:
Colour Tone
Detailed Settings
Backlight
Size
Cool1
2. Press the
▲
or
▼
button to select "Size", then press the
:
:
10
Auto Wide
eNTeR/OK button.
Screen Mode
More
: 1ꢃ : ꢆ
ꢀ. Select the required option by pressing the
▲
or
▼
button.
Move
enter
Return
Press the eNTeR/OK button.
TV
Size
ꢁ. Press the exIT button to exit.
Auto Wide
Wide
1ꢃ : ꢆ
Auto Wide: Automatically adjusts the picture size to the "16:9"
Wide Zoom
Zoom
ꢁ : ꢀ
Just Scan
aspect ratio.
Wide: Adjusts the picture size to 16:10 appropriate for DVDs or
wide broadcasting.
1ꢃ:ꢆ:Adjusts the picture size to 16:9 appropriate for DVDs or
wide broadcasting.
Move
enter
Return
Wide Zoom: Magnify the size of the picture more than 4:3.
Zoom: Magnifies the 16:9 wide picture (in the vertical direction)
to fit the screen size.
ꢁ:ꢀ:This is the default setting for a video movie or normal
broadcasting.
Just Scan: Displays the input scenes as they are without any
You can select these options
by simply pressing the P.SIZe
button on the remote control.
cutoff when HDMI 720p,1080i signals are input.
"Auto Wide" function is available only in "TV", "Ext.", "AV",
"S-Video" and "DTV" mode.
In PC Mode, only "Wide" and "4:3" mode can be adjusted.
Zoom : Select
by pressing the
or button to move the picture up and
, use the or button to
◄
or
►
button.
Use the
down. After selecting
▲
▼
▲
▼
magnify or reduce the picture size in the vertical
direction.
Wide Zoom : Move the screen up/down using the
▲
or
▼
buttons after selecting the
by pressing the
►
or eNTeR/OK button.
english - 1ꢅ
Download from Www.Somanuals.com. All Manuals Search And Download.
Freezing the Current Picture
Press the STIll button to freeze a moving picture into a
still one. Press again to cancel.
Selecting the Screen Mode
When setting the picture size to Auto Wide in a 1ꢃ:ꢆ wide TV,
you can determine the picture size you want to see the ꢁ:ꢀ
WSS (Wide Screen Service) image or nothing. each individual
european country requires different picture size so this
function is intended for users to select it.
TV
Picture
Dynamic
Mode
:
100
ꢁꢂ
ꢄꢂ
ꢂꢂ
R ꢂ0
Contrast
Brightness
Sharpness
Colour
Tint
G ꢂ0
:
Colour Tone
Detailed Settings
Backlight
Size
Cool1
1. Press the MeNu button to display the menu.
:
:
10
Auto Wide
Press the eNTeR/OK button, to select “Picture”.
Screen Mode
More
: 1ꢃ : ꢆ
Move
enter
Return
2. Press the
▲
or
▼
button to select "Screen Mode", then press
the eNTeR/OK button.
TV
Picture
Mode
:
Dynamic
ꢀ. Select the required option by pressing the
▲
or
▼
button.
Contrast
Brightness
Sharpness
Colour
100
ꢁꢂ
Press the eNTeR/OK button.
Available options: Wide, 16:9, Wide Zoom, Zoom, 4:3
ꢄꢂ
ꢂꢂ
R ꢂ0
Tint
G ꢂ0
:
Colour Tone
Detailed Settings
Backlight
Size
Cool1
Wide
1ꢃ:ꢆ
Wide Zoom
Wide: Sets the picture to 16:10 wide mode.
1ꢃ:ꢆ: Sets the picture to 16:9 wide mode.
Wide Zoom: Magnify the size of the picture more than 4:3.
Zoom: Magnify the size of the picture vertically on screen.
ꢁ:ꢀ: Sets the picture to 4:3 normal mode.
:
:
Zoom
Screen Mode
More
: 1
ꢁ:ꢀ
Move
enter
Return
ꢁ. Press the exIT button to exit.
Screen Mode is available in Auto Wide mode.
This function is not available in PC, Component or HDMI mode.
Resetting the Picture Settings to the Factory Defaults
TV
Picture
You can return to the factory defaults picture settings.
More
Digital NR
Active Colour
DNle
:
:
:
:
Auto
On
1. To select the desired picture effect, follow the
"Changing the Picture Standard" instructions number 1 to 3
on page 15.
On
Reset
OK
2. Press the
▲
or
▼
button to select "Reset", then press the
eNTeR/OK button.
ꢀ. Press the or
▲
▼
button to select "OK" or "Cancel".
Move
enter
Return
Press the eNTeR/OK button.
TV
Picture
ꢁ. Press the exIT button to exit.
More
Digital NR
Active Colour
DNle
:
:
:
:
Auto
On
The "Reset" will be set for each picture mode.
On
Reset
O
OK
Cancel
Move
enter
Return
english - 1ꢆ
Download from Www.Somanuals.com. All Manuals Search And Download.
Digital NR / Active Colour / DNIe
If the broadcast signal received by your TV is weak, you can
activate the Digital Noise Reduction feature to help reduce
any static and ghosting that may appear on the screen.
TV
Picture
More
Digital NR
Active Colour
DNle
:
:
:
:
Auto
On
On
Reset
OK
1. Press the MeNu button to display the menu.
Press the eNTeR/OK button, to select “Picture”.
2. Select the required option by pressing the ▲ or ▼ button,
then press the eNTeR/OK button.
Available options: Digital NR, Active Colour, DNIe.
Move
enter
Return
ꢀ. When you are satisfied with your setting, press the
eNTeR/OK button.
ꢁ. Press the exIT button to exit.
Digital NR: Off/low/Medium/high/Auto
If the signal received by the television is weak, you can activate this feature to reduce any static and
ghosting that may appear on the screen.
This function is not available in PC mode.
Active Colour: Off/On
If you turn on this option, the colours of the sky and grass will be stronger and clearer for a more
vivid on-screen picture.
This function is not available in PC mode.
This function is not available in Movie and Standard mode.
DNIe: Off/Demo/On
This TV includes the DNIe function so as to provide a high visual quality. If you set DNIe to on, you
can view the screen with the DNIe feature activated. If you set the DNIe to Demo, you can view the
applied DNIe and normal pictures on the screen, for demonstration purposes. Using this function,
you can view the difference in the visual quality.
DNIeTM (Digital Natural Image engine)
This feature brings you more detailed image with 3D noise reduction, detail enhancement, con-
trast enhancement and white enhancement. New image compensation Algorithm gives brighter,
clearer, more detailed image to you. DNIeTM technology will fit every signal into your eyes.
This function is not available in PC mode.
This function is not available in Movie mode.
english - 20
Download from Www.Somanuals.com. All Manuals Search And Download.
Viewing the Picture In Picture (PIP)
You can display a sub picture within the main picture of set
programme or video input. In this way, you can watch the
picture of set programme or video input from any connected
equipment while watching the main picture.
Mode
: Custom
Setup
TV
Plug & Play
language
: english
Time
Game Mode
: Off
Blue Screen
: Off
Melody
: Medium
1. Press the MeNu button to display the menu.
Press the ▲ or ▼ button to select "Setup", then press the
eNTeR/OK button.
PC
home Theatre PC
light effect
energy Saving
: Off
:
In Watching TV
: Off
hDMI Black level
PIP
: low
2. Press the
▲
or
▼
button to select "PIP", then press the
Move
enter
Return
eNTeR/OK button.
PIP
TV
PIP
:
On
ꢀ. Press the eNTeR/OK button again.
Source
:
TV
Press the
▲
or
▼
button to select "On", then press
Position
:
Programme
:
P 1
eNTeR/OK button.
ꢁ. Press the or
▲
▼
button to select "Source",then press
eNTeR/OK button. Select a source of the sub picture by
pressing the
button.
▲
or
▼
button and press the eNTeR/OK
Move
Return
enter
The sub picture can serve different source selections
based on what the main picture is set to.
Main picture
Sub picture
Component
HDMI
PC
Analog TV broadcasts
Ext
AV
Press the PIP button on the
remote control repeatedly to
activate or deactivate the "PIP".
ꢂ. Press the
eNTeR/OK button.
Select the position of the sub picture by pressing the
▲
or
▼
button to select "Position", then press the
▲
or
▼
button and then press the eNTeR/OK
button.
ꢃ. Press the
▲
or
▼
button to select "Programme" and then press the eNTeR/OK button.
You can select the channel that you want to view through sub picture by pressing the
button. Press the eNTeR/OK button.
▲
or
▼
The "Programme" can be active when the sub picture is set to TV.
ꢄ. Press the exIT button to exit.
You may notice that the picture in the PIP window becomes slightly unnatural when you use the
main screen to view a game or karaoke.
Source: Used to select a source of the sub picture.
Position: Used to move the sub picture.
Programme: Used to Change the sub picture.
english - 21
Download from Www.Somanuals.com. All Manuals Search And Download.
hDMI Black level
Mode
: Custom
Setup
You can directly select the black level on the screen to adjust
the screen depth.
TV
Plug & Play
language
: english
Time
1. Press the MeNu button to display the menu.
Press the ▲ or ▼ button to select "Setup", then press the
eNTeR/OK button.
Game Mode
: Off
Blue Screen
: Off
Melody
: Medium
PC
home Theatre PC
light effect
energy Saving
: Off
:
In Watching TV
: Off
2. Press the
▲
or
▼
button to select "HDMI Black Level", then
hDMI Black level
PIP
: low
press the eNTeR/OK button.
Move
enter
Return
ꢀ. Press the ▲ or ▼ button to select "Normal" or "Low", then
Setup
press the eNTeR/OK button.
TV
Plug & Play
language
: english
ꢁ. Press the exIT button to exit.
Time
Game Mode
: Off
This function is active only when the external input connects
to HDMI (RGB signals).
Blue Screen
: Off
Melody
: Medium
PC
home Theatre PC
light effect
energy Saving
: Off
:
In Watching TV
Normal: The screen gets brighter.
low: The screen gets darker.
: Off
hDMI Black level
: lNormal
low
PIP
Move
enter
Return
Changing the Sound Standard
You can select the type of the special sound effect to be used
when watching a given broadcast.
TV
Sound
Mode
:
Custom
equalizer
SRS TS xT
Auto Volume
Internal Mute
Sound Select
Reset
:
:
:
:
Off
1. Press the MeNu button to display the menu.
Off
Off
Main
Press the
▲
or
▼
button to select "Sound", then press the
eNTeR/OK button.
2. Press the eNTeR/OK button again, to select "Mode".
ꢀ. Select the required sound effect by pressing the or
▲
▼
Move
enter
Return
button repeatedly and then press the eNTeR/OK button.
TV
Sound
ꢁ. Press the exIT button to exit.
Mode
:
Standard
Music
Movie
equalizer
SRS TS xT
Auto Volume
Internal Mute
Sound Select
Reset
:
:
:
:
Speech
Standard: Selects the normal sound mode.
Music: Emphasizes music over voices.
Movie: Provides live and full sound for movies.
Speech: Emphasizes voices over other sounds.
Custom: Selects your custom sound settings.
(Refer to "Adjusting the Sound Settings")
Custom
Off
Main
Move
enter
Return
english - 22
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the Sound Settings
The sound settings can be adjusted to suit your personal
preferences.
TV
Sound
Mode
:
Custom
equalizer
SRS TS xT
Auto Volume
Internal Mute
Sound Select
Reset
:
:
:
:
Off
1. Press the MeNu button to display the menu.
Press the ▲ or ▼ button to select "Sound", then press the
eNTeR/OK button.
Off
Off
Main
2. Press the ▲ or ▼ button to select "Equalizer", then press the
eNTeR/OK button.
Move
enter
Return
ꢀ. Press the ◄ or ► button to select a particular item.
Press the eNTeR/OK button.
TV
equalizer
ꢁ. Press the ▲ or ▼ button to reach the required setting.
Press the eNTeR/OK button.
ꢂ. Press the exIT button to exit.
If you make any changes to these settings, the Sound Mode
is automatically switched to "Custom".
Balance 100hz ꢀ00hz 1khz ꢀkhz 10khz
Move
Adjust
Return
Setting the TruSurround xT (SRS TS xT)
TV
Sound
TruSurround xT is a patented SRS technology that solves
the problem of playing ꢂ.1 multichannel content over two
speakers. TruSurround delivers a compelling,virtual surround
sound experience through any two-speaker playback system,
including internal television speakers. It is fully compatible
with all multichannel formats.
Mode
:
Custom
equalizer
SRS TS xT
Auto Volume
Internal Mute
Sound Select
Reset
:
:
:
:
Off
Off
Off
Main
1. Press the MeNu button to display the menu.
Press the
▲
or
▼
button to select "Sound", then press the
Move
enter
Return
eNTeR/OK button.
TV
Sound
Mode
:
Custom
2. Press the ▲ or ▼ button to select "SRS TS XT", then press
equalizer
SRS TS xT
Auto Volume
Internal Mute
Sound Select
Reset
the eNTeR/OK button.
:
:
:
:
On
Off
Off
ꢀ. Press the ▲ or ▼ button to select "On" or "Off". Press the
Main
eNTeR/OK button.
ꢁ. Press the exIT button to exit.
TruSurround XT, SRS and
symbol are
Move
enter
Return
trademarks of SRS Labs, Inc. TruSurround XT
technology is incorporated under license from
SRS Labs, Inc.
You can also set these options
simply by pressing the SRS
button on remote control.
english - 2ꢀ
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting headphones
You can connect a set of headphones to your set if you wish to
watch a TV programme without disturbing the other people in the
room.
TV Rear Panel
When you insert the head set jack into the corresponding port, you
can not operate "Internal Mute" in Sound menu.
Prolonged use of headphones at a high volume may damage your
hearing.
You will not receive sound from the speakers when you connect headphones to the system.
The headphone volume and TV volume are adjusted differently.
Selecting the Sound Mode
You can set the sound mode by pressing the “DuAl” button.
When you press it, the current sound mode is displayed on the
screen.
Audio Type
Mono
Dual 1/2
Mono
Default
Automatic
change
You can also set these options
simply by pressing the DuAl
button on remote control.
A2
Stereo
Dual
Stereo
↔
Dual 1 ↔ Dual
Mono
Mono
Stereo
2
Dual 1
Mono
Automatic
change
Stereo
Dual
Mono
Mono
↔
Stereo
NICAM
Stereo
↔
Dual
Dual
2
1
Dual 1
If the stereo signal is weak and an automatic switching occurs, then switch to the Mono.
This function is only activated in stereo sound signal. It is deactivated in mono sound signal.
Adjusting the Volume Automatically
TV
each broadcasting station has its own signal conditions and
so it is not easy for you to adjust the volume every time the
channel is changed. This feature allows you to automatically
adjust the volume of the desired channel by lowering the
sound output when the modulation signal is high or by
raising the sound output when the modulation signal is low.
Sound
Mode
:
Custom
equalizer
SRS TS xT
Auto Volume
Internal Mute
Sound Select
Reset
:
:
:
:
Off
Off
Off
Main
1. Press the MeNu button to display the menu.
Press the ▲ or ▼ button to select "Sound", then press the
eNTeR/OK button.
Move
enter
Return
TV
Sound
2. Press the ▲ or ▼ button to select "Auto Volume", then press
Mode
:
Custom
equalizer
SRS TS xT
Auto Volume
Internal Mute
Sound Select
Reset
the eNTeR/OK button.
:
:
:
:
Off
Off
On
Main
ꢀ. Press the ▲ or ▼ button to select "On" or "Off". Press the
eNTeR/OK button.
ꢁ. Press the exIT button to exit.
Move
enter
Return
english - 2ꢁ
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting the Internal Mute
TV
If you want to hear the sound through separate speakers,
cancel the internal amplifier.
Sound
Mode
:
Custom
equalizer
SRS TS xT
Auto Volume
Internal Mute
Sound Select
Reset
:
:
:
:
Off
1. Press the MeNu button to display the menu.
Press the ▲ or ▼ button to select "Sound", then press the
eNTeR/OK button.
Off
Off
Main
2. Press the ▲ or ▼ button to select "Internal Mute", then press
the eNTeR/OK button.
Move
enter
Return
ꢀ. Press the ▲ or ▼ button to select "On" or "Off". Press the
TV
Sound
eNTeR/OK button.
Mode
:
Custom
equalizer
SRS TS xT
Auto Volume
Internal Mute
Sound Select
Reset
ꢁ. Press the exIT button to exit.
:
:
:
:
Off
Off
Off
On
When "Internal Mute" is set to "On", the Sound menus except
for "Sound Select" (in PIP mode) cannot be adjusted.
Move
enter
Return
listening to the Sound of the Sub Picture
TV
Sound
During the PIP features activation, you can listen to the sound
of the sub picture.
Mode
:
Custom
equalizer
SRS TS xT
Auto Volume
Internal Mute
Sound Select
Reset
:
:
:
:
Off
Off
1. Press the MeNu button to display the menu.
Press the ▲ or ▼ button to select "Sound", then press the
eNTeR/OK button.
Off
Main
2. Press the ▲ or ▼ button to select "Sound Select", then press
the eNTeR/OK button.
Move
enter
Return
ꢀ. Press the ▲ or ▼ button to select "Sub".
TV
Sound
Press the eNTeR/OK button.
Mode
:
Custom
equalizer
SRS TS xT
Auto Volume
Internal Mute
Sound Select
Reset
ꢁ. Press the exIT button to exit.
:
:
:
:
Off
Off
Off
Main
Main : Used to listen to the sound of the main picture.
Sub : Used to listen to the sound of the sub picture.
Sub
You can select this option when the “PIP” is set to “On”.
Move
enter
Return
english - 2ꢂ
Download from Www.Somanuals.com. All Manuals Search And Download.
Resetting the Sound Settings to the Factory Defaults
If "Game Mode" is On, the Reset Sound function is activated
TV
Sound
(Refer to page 2ꢅ). Selecting the Reset function after setting
the equalizer resets the equalizer setting to the factory
defaults.
Mode
:
Custom
equalizer
SRS TS xT
Auto Volume
Internal Mute
Sound Select
Reset
:
:
:
:
Off
Off
Off
Main
1. Press the MeNu button to display the menu.
Press the ▲ or ▼ button to select "Sound", then press the
eNTeR/OK button.
Move
enter
Return
2. Press the ▲ or ▼ button to select "Reset", then press the
eNTeR/OK button.
ꢀ. Press the exIT button to exit.
You can select this option when the "Game Mode" is set to "On".
Setting and Displaying the Current Time
Mode
: Custom
Setup
You can set the TV’s clock so that the current time is
displayed when you press the INFO button. You must also set
the time if you wish to use the automatic On/Off timers.
TV
Plug & Play
language
: english
Time
Game Mode
: Off
Blue Screen
: Off
1. Press the MeNu button to display the menu.
Press the ▲ or ▼ button to select "Setup", then press the
eNTeR/OK button.
Melody
: Medium
PC
home Theatre PC
light effect
energy Saving
: Off
:
In Watching TV
: Off
hDMI Black level
PIP
: low
2. Press the ▲ or ▼ button to select "Time", then press the
eNTeR/OK button.
Move
enter
Return
ꢀ. Press the eNTeR/OK button to select "Clock Set".
Clock Set
TV
Month
Day
01
Year
200ꢄ
ꢁ.
To...
Press the...
01
q
Move to "Month", "Day", "Year",
"Hour" or "Minute"
◄ or ► button.
hour
Minute
00
00
Set the "Month", "Day", "Year",
"Hour" or "Minute"
▲ or ▼ button.
Move
Adjust
Return
Confirm the setting
eNTeR/OK button.
ꢂ. Press the exIT button to exit.
If you disconnect the power cord, you have to set the clock again.
You can also set "Year", "Month", "Day", "Hour" and "Minute" by pressing the number buttons on the
remote control.
english - 2ꢃ
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the Sleep Timer
You can select a time period of between ꢀ0 and 1ꢅ0 minutes
after which the television automatically switches to standby
mode.
Setup
TV
Plug & Play
language
: english
Time
Game Mode
: Off
Blue Screen
: Off
1. Press the MeNu button to display the menu.
Press the ▲ or ▼ button to select "Setup", then press the
eNTeR/OK button.
Melody
: Medium
PC
home Theatre PC
light effect
energy Saving
: Off
:
In Watching TV
: Off
hDMI Black level
PIP
: low
2. Press the ▲ or ▼ button to select "Time", then press the
eNTeR/OK button.
Move
enter
Return
TV
Time
ꢀ. Press the ▲ or ▼ button to select "Sleep Timer", then press
Clock Set
Sleep Timer
Timer 1
:
:
:
:
:
00 : 00
the eNTeR/OK button.
Off
ꢀ0
ꢁ. Press the ▲ or ▼ button repeatedly until the desired time
appears (Off, 30, 60, 90, 120, 150, 180).
Press the eNTeR/OK button.
Timer 2
ꢃ0
Timer ꢀ
ꢆ0
120
1ꢂ0
1ꢅ0
ꢂ. Press the exIT button to exit.
The TV automatically switches to standby mode when the
timer reaches 0.
Move
enter
Return
Switching the Television On and Off Automatically
Mode
: Custom
Setup
1. Press the MeNu button to display the menu.
TV
Press the ▲ or ▼ button to select "Setup", then press the
eNTeR/OK button.
Plug & Play
language
: english
Time
Game Mode
: Off
Blue Screen
: Off
2. Press the ▲ or ▼ button to select "Time", then press the
Melody
: Medium
PC
eNTeR/OK button.
home Theatre PC
light effect
energy Saving
: Off
:
In Watching TV
: Off
ꢀ. Press the ▲ or ▼ button to select "Timer 1", "Timer 2",
hDMI Black level
PIP
: low
"Timer 3", then press the eNTeR/OK button.
Move
enter
Return
ꢁ. Press the ▲ or ▼ button to adjust “Hour”, then press the ►
button to move to the next step.
Timer 1
TV
On Time
Set other items using the same method as above.
5
:
00
00
00
No
6
Yes/No
Press the ▲ or ▼ button
Press the ▲ or ▼ button
Off Time
:
00
No
Repeat
Volume
Select a Once,
Repeat
Once
Sat~Sun, Mon~Sat,
Mon~Fri, Everyday
Volume
10
Programme
01
Adjust a 0~100
Press the ▲ or ▼ button
Press the ▲ or ▼ button
►
Move
Adjust
Return
Programme Adjust a Programme
When finished, press the ReTuRN button to return.
• The current time will appear every time you press the INFO button.
• You can set the hour, minute, directly by pressing the number buttons on the remote control.
ꢂ. Press the exIT button to exit.
Auto Power Off
When you set the timer “On”, the TV will eventually turn off, if no controls are operated for 3 hours
after the TV was turned on by the timer. This function is only available in timer “On” mode and
prevents overheating, which may occur if a TV is on for too long time.
english - 2ꢄ
Download from Www.Somanuals.com. All Manuals Search And Download.
Choosing Your language
When you start using your set for the first time, you must
select the language which will be used for displaying menus
and indications.
Mode
: Custom
Setup
TV
Plug & Play
language
: english
Time
Game Mode
: Off
Blue Screen
: Off
1. Press the MeNu button to display the on-screen menu.
Press the ▲ or ▼ button to select "Setup", then press the
eNTeR/OK button.
Melody
: Medium
PC
home Theatre PC
light effect
energy Saving
: Off
:
In Watching TV
: Off
hDMI Black level
PIP
: low
2. Press the ▲ or ▼ button to select "Language", then press
the eNTeR/OK button.
Move
enter
Return
o
: Cuto
Setup
TV
ꢀ. Select a particular language by pressing the ▲ or ▼ button
repeatedly.
Plug & Play
english
language
:
Deutsch
Time
Press the eNTeR/OK button.
Français
:
Game Mode
Italiano
:
español
:
Nederlands
Blue Screen
Melody
ꢁ. Press the exIT button to exit.
PC
Português
home Theatre PC
light effect
energy Saving
hDMI Black level
PIP
:
Eλληνικά
:
q
: Off
: low
Move
enter
Return
using Game Mode
When connecting to a game console such as PlayStationTM or
xboxTM, you can enjoy a more realistic gaming experience by
selecting game menu.
Setup
TV
Plug & Play
language
: english
Time
Game Mode
: Off
Blue Screen
: Off
1. Press the MeNu button to display the menu.
Press the ▲ or ▼ button to select "Setup", then press the
eNTeR/OK button.
Melody
: Medium
PC
home Theatre PC
light effect
energy Saving
: Off
:
In Watching TV
: Off
hDMI Black level
PIP
: low
2. Press the ▲ or ▼ button to select "Game Mode", then press
the eNTeR/OK button.
Move
enter
Return
Mode
: Custom
Setup
TV
ꢀ. Press the ▲ or ▼ button to select "On" or "Off". Press the
Plug & Play
eNTeR/OK button.
language
: english
Time
Game Mode
: Off
On
:
ꢁ. Press the exIT button to exit.
Blue Screen
Melody
: Medium
To disconnect the game console and connect another
external device, cancel game mode in the setup menu.
If you display the TV menu in Game mode, the screen
shakes slightly.
Game Mode is not available in TV mode.
If Game Mode is On:
PC
home Theatre PC
light effect
energy Saving
: Off
:
In Watching TV
: Off
hDMI Black level
PIP
: low
Return
Move
enter
• Picture Mode changes to Standard and Sound Mode changes to Custom automatically.
The user cannot change these to other modes.
• Sound Mode in the Sound menu is deactivated. Adjust the sound using the equalizer.
• The Reset Sound function is activated. Selecting the Reset function after setting the equalizer
resets the equalizer setting to the factory defaults.
english - 2ꢅ
Download from Www.Somanuals.com. All Manuals Search And Download.
Blue Screen / Melody / energy Saving
Mode
: Custom
Setup
1. Press the MeNu button to display the menu.
Press the ▲ or ▼ button to select "Setup", then press the
eNTeR/OK button.
TV
TV
TV
Plug & Play
language
: english
Time
Game Mode
: Off
Blue Screen
: OOff
2. Press the ▲ or ▼ button to select "Blue Screen", "Melody" or
On
Melody
: O
PC
"Energy Saving". Press the eNTeR/OK button.
home Theatre PC
light effect
energy Saving
: Off
:
In Watching TV
: Off
ꢀ. When you are satisfied with your setting,
hDMI Black level
PIP
: low
Return
press the eNTeR/OK button.
Move
enter
Blue Screen: Off/On
Setup
If no signal is being received or the signal is very weak,
a blue screen automatically replaces the noisy picture
background. If you wish to continue viewing the poor picture,
you must set the "Blue Screen" mode to "Off".
Plug & Play
language
: english
Time
Game Mode
: Off
Blue Screen
: Off
Melody
: Off
Off
PC
low
Medium
:
home Theatre PC
light effect
energy Saving
high
n Wachig TV
:
Melody: Off/low/Medium/high
You can hear melody sound when the television is powered
on or off.
: Off
hDMI Black level
PIP
: low
Return
Move
enter
energy Saving: Off/low/Medium/high/Auto
This function adjusts the brightness of the TV so as to reduce
power consumption. When watching TV at night, set the
"Energy Saving" mode option to "High" to reduce eye fatigue
as well as power consumption.
Setup
Plug & Play
language
Time
: english
Game Mode
Blue Screen
Melody
: Off
: Off
: Medium
PC
home Theatre PC
light effect
energy Saving
hDMI Black level
PIP
: O
I
Off
low
:
ꢁ. Press the exIT button to exit.
: OMedium
high
Auto
: l
Move
enter
Return
Setting the light effect
You can turn on/off the blue leD on the front of TV according
to the situation. use it for saving power or when the leD
dazzles your eyes.
Setup
TV
Plug & Play
language
Time
: english
Game Mode
Blue Screen
Melody
: Off
: Off
: Medium
1. Press the MeNu button to display the menu.
Press the ▲ or ▼ button to select “Setup”, then press the
eNTeR/OK button.
PC
home Theatre PC
light effect
energy Saving
hDMI Black level
PIP
: Off
:
In Watching TV
: Off
: low
2. Press the ▲ or ▼ button to select “Light Effect”, then press
Move
enter
Return
the eNTeR/OK button.
Setup
TV
ꢀ. Press the ▲ or ▼ button to select “Off”, “In Standby”, “In
Plug & Play
language
Time
: english
Watching TV” or “Always”, then press the eNTeR/OK button.
Game Mode
Blue Screen
Melody
: Off
: Off
: Medium
• Off: LED will not come on.
PC
• In Standby: Turns the LED on in standby mode.
• In Watching TV: Turns the LED on while watching TV.
• Always: LED will come on after you turn the TV off.
home Theatre PC
light effect
energy Saving
hDMI Black level
PIP
: O
Off
:
I
In Standby
: OInWatching TV
Always
: l
Move
enter
Return
Press the exIT button to exit.
Set the "Light Effect" to "Off" to reduce power
consumption.
english - 2ꢆ
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting the Source
Input
You can select among external sources connected to your
TV’s input jacks.
TV
Source list
:
TV
edit Name
1. Press the MeNu button to display the menu.
Press the ▲ or ▼ button to select "Input", then press the
eNTeR/OK button.
2. Press the eNTeR/OK button again, to select "Source List".
When no external device is connected to your
set, only "TV", "Ext.", "DTV" are activated in the
"Source List". "AV", "S-Video", "Component", "PC",
"HDMI" are activated only when they are
connected to your set.
ꢀ. Select the required device by pressing the ▲ or ▼ button.
Press the eNTeR/OK button.
Return
Move
enter
Source list
TV
TV
:
----
ext.
:
----
AV
:
----
S-Video
: ----
Component
:
:
:
----
----
----
PC
hDMI
DTV
Move
Return
enter
Press the SOuRCe button on the remote control to toggle
between all the available source.
TV mode can be selected by pressing the TV/DTV button,
number buttons (0~9) and the P
/
button on the remote
control. But it cannot be selected using the SOuRCe button.
editing the Input Source Names
Mode
: Custom
Input
Name the device connected to the input jacks to make your
input source selection easier.
TV
Source list
:
TV
edit Name
1. Press the MeNu button to display the menu.
Press the ▲ or ▼ button to select "Input", then press the
eNTeR/OK button.
2. Press the ▲ or ▼ button to select "Edit Name", then press
Move
Return
the eNTeR/OK button.
enter
ꢀ. Press the ▲ or ▼ button to select the device that you wish to
edit.
Press the eNTeR/OK button.
ꢁ. Press the ▲ or ▼ button to select the required device.
Press the eNTeR/OK button.
Mode
: Custom
edit Name
TV
ext.
:
----
:
AV
VCR
DVD
S-Video
:
D-VhS
Component
:
Cable STB
PC
:
:
hD STB
hDMI
Satellite STB
AV Receiver
q
ꢂ. Press the exIT button to exit.
Move
Return
enter
english - ꢀ0
Download from Www.Somanuals.com. All Manuals Search And Download.
Previewing the DTV Menu System
Guide
The company does not guarantee the normal operation
of the DTV menu for countries other than the 6
supported countries (United Kingdom, Germany,
France, Italy, Spain, Austria) because only these
country standards are supported. In addition, when
the country of the broadcast stream differs from
the country selected by the current user, the string
appearing in the channel banner, Info, Guide, Channel
Manager, etc. may not be displayed properly.
Now & Next Guide
: Full Guide
Full Guide
Scheduled list
Default Guide
Move
enter
exit
Channel
Available in DTV mode. Preset to the DTV mode by
using the TV/DTV button on your remote control. To
help you navigate around the on-screen menu system
and adjust the various settings available, refer to the
following illustration.
Country
Auto Store
Manual Store
: Others
edit Favourite Channels
Channel list
Press the D.MeNu button.
Move
enter
exit
Guide
Setup
Now & Next Guide
Full Guide
Scheduled List
Menu Transparency : Medium
Change PIN
Parental lock
Subtitle
Subtitle Mode
q
: On
: Normal
Default Guide
Now/Next, Full Guide
Channel
Move
Country
Auto Store
enter
exit
Manual Store
Edit Favourite Channels
Channel List
language
Audio language
Subtitle language
Teletext language
Preference
All, Favourites, Default
Setup
Menu Transparency
Change PIN
Parental Lock
Subtitle
Subtitle Mode
Audio Format
Digital Text
High, Medium, Low, Opaque
Move
enter
exit
Off, On
Normal, Hard of hearing
PCM, Dolby Digital
Disable, Enable
Time Zone
System
Product Information
Signal Information
Software Upgrade
Common Interface
Reset
You can select these options
by simply pressing the
D.MeNu button on the
remote control.
Language
Audio Language
Subtitle Language
Teletext Language
Preference
Primary Audio Language
Secondary Audio Language
Primary Subtitle Language
Secondary Subtitle Language
Primary Teletext Language
Secondary Teletext Language
The sub-items of the CI Menu may vary depending on the CAM model.
english - ꢀ1
Download from Www.Somanuals.com. All Manuals Search And Download.
updating the Channel list Automatically
Channel
: Others
You can update the channel list when the broadcaster
adds new Services or if you move the TV to a new
location.
Country
Auto Store
Manual Store
edit Favourite Channels
1. Press the D.MeNu button to display the DTV menu.
Channel list
2. Press the ▲ or ▼ button to select "Channel", then press
the eNTeR/OK button.
Move
Return
ꢀ. Press the eNTeR/OK button again, to select "Country".
enter
ꢁ. Select the appropriate country by pressing the ▲ or ▼
button. Press the eNTeR/OK button to confirm your
choice.
Mode
: Custom
ꢀꢂ%
Auto Store
Scanning for digital services...
Even though you have changed the country setting
in this menu, the country setting for Analog TV is not
changed.(Refer to page 10)
Services found: 2ꢁ Channel: ꢀꢅ
Stop
ꢂ. Press the ▲ or ▼ button to select "Auto Store", then
Return
press the eNTeR/OK button.
When it has finished, the number of scanned services
will be displayed.
The existing favourite channel list will not be deleted when the channel list is updated.
To stop the scan before it has finished, press the eNTeR/OK button with "STOP"
selected.
ꢃ. Press the exIT button to exit.
If the signal status is poor, the "No Service found! Check the aerial connection" message
is displayed.
updating the Channel list Manually
You can specify the channel for a fast channel search.
Manual Store
1. Press the D.MeNu button to display the DTV menu.
Channel
Frequency
ꢁꢄꢁ000
Bandwidth
Mhz
▲
2. Press the ▲ or ▼ button to select "Channel", then press
Khz
ꢅ
65
the eNTeR/OK button.
▼
ꢀ. Press the ▲ or ▼ button to select "Manual Store", then
press the eNTeR/OK button.
Search
Adjust
Return
ꢁ. Press the ▲ or ▼ button to select "Channel", then press
the eNTeR/OK button.
• Channel: Channel "5" to "69" in sequence are displayed (depending on the country)
• Frequency: The frequency available in the Channel group is displayed.
• Bandwidth: The available bandwidths are 7 and 8 MHz.
ꢂ. When it has finished, the number of scanned services will be displayed.
ꢃ. Press the exIT button to exit.
english - ꢀ2
Download from Www.Somanuals.com. All Manuals Search And Download.
editing Your Favourite Channels
You can edit your favourite channels using the four colour
buttons.
edit Favourite Channels
(no Channels)
1. Press the D.MeNu button to display the DTV menu.
2. Press the ▲ or ▼ button to select "Channel", then press the
eNTeR/OK button.
ꢀ. Press the ▲ or ▼ button to select "Edit Favourite Channels",
then press the eNTeR/OK button.
Add Channels
Return
ꢁ. Press the red button to display all currently stored channels.
ꢂ. Press the ▲ or ▼ button to select a channel you want.
Press the eNTeR/OK button.
A " " icon is shown next to the selected channel and the
channel will be added to the favourite channel list.
edit Favourite Channels
•
•
•
•
To undo, press the eNTeR/OK button again.
Select All: Select all channels currently displayed.
Select None: Deselect all selected channels.
Preview: Displays (a) currently selected channel(s).
5
1
2
ꢀ
ꢁ
BBC TWO
Five
BBC ThRee
abc1
The Favorite Channels settings have been completed.
ꢂ
6
QVC
ꢃ. Press the exIT button to exit.
Preview
Select All
Select None
Move
Select
Return
Add
You can use this function when one or more favourite
channels have been selected.
edit Favourite Channels
1
ꢀ
ꢁ
BBC TWO
BBC ThRee
abc1
★
★
★
1. Press the D.MeNu button to display the DTV menu.
2. Press the ▲ or ▼ button to select "Channel", then press the
eNTeR/OK button.
ꢀ. Press the ▲ or ▼ button to select "Edit Favourite Channels",
Preview
Delete
then press the eNTeR/OK button.
Add
Renumber
Move
Return
ꢁ. Press the red button in the "Edit Favourite Channels" menu.
To add more channels, refer to the step 5 on the previous
description.
ꢂ.
If you want to check the channel to be stored, press ReTuRN
button.
edit Favourite Channels
Press the exIT button to exit.
5
1
2
ꢀ
ꢁ
• To add all channels to the favourite channel list, press the
red button.
• To remove all channels, press the green button.
• Preview : Displays (a) currently selected channel(s).
• Press the Ch lIST button to display the favourite channel
manager.
BBC TWO
Five
BBC ThRee
abc1
QVC
★
★
★
ꢂ
6
Select All
Select None
Preview
Move
Select
Return
english - ꢀꢀ
Download from Www.Somanuals.com. All Manuals Search And Download.
Renumber (depending on the country)
edit Favourite Channels
1. Press the D.MeNu button to display the DTV menu.
1
BBC TWO
BBC ThRee
abc1
★
★
★
2. Press the ▲ or ▼ button to select "Channel", then press the
_ _ _
ꢁ
eNTeR/OK button.
ꢀ. Press the ▲ or ▼ button to select "Edit Favourite Channels",
then press the eNTeR/OK button.
ꢁ. Select the required channel using the ▲ or ▼ button.
edit
Return
Confirm
ꢂ. Press the green button.
The space for entering the number is a blank.
ꢃ. Enter the new channel number. Press eNTeR/OK button to
store or ReTuRN button to cancel.
Press the ◄ button to delete an entered digit.
If you enter a number already assigned to another
channel, the number is assigned to the selected channel
and the previous number assigned to the selected channel
is assigned to the other channel.
That is, the two numbers are exchanged.
The favorite channels are automatically sorted in
ascending order of channel numbers.
ꢄ. Press the exIT button to exit.
Preview
edit Favourite Channels
1. In the "Edit Favourite Channels" menu,
select the channel to be previewed by pressing the ▲ or ▼
button.
1
ꢀ
ꢁ
BBC TWO
BBC ThRee
abc1
★
★
★
2. Press the yellow button.
The selected channel is displayed on the screen.
Preview
Delete
Add
Renumber
Move
Return
Delete
1. In the "Edit Favourite Channels" menu, select the channel to
be deleted from the favourite channels list by pressing the
▲ or ▼ button.
edit Favourite Channels
1
ꢀ
BBC TWO
★
★
BBC ThRee
2. Press the blue button.
The selected channel and number will be deleted.
To add a deleted channel back in to the favourite channel
list, see "Add" on page 33.
Preview Delete
Renumber
Add
Move
Return
english - ꢀꢁ
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting Channel list
You can exclude the channels you have chosen from the
channels you have scanned.When you scan through the
stored channels, those you have chosen to skip are not
displayed. All channels that you do not specifically choose to
skip are displayed during scanning.
Channel list
All Channels-All
1/2
Test Card M'
1
ꢀ
ꢁ
ꢂ
ꢃ
Test Card M'
2ꢀ bid-up.tv
2ꢂ TCM
ꢃ0 Television x
ꢄ0 BBC Radio 1
ꢄ2 BBC Radio 2
ꢄꢀ BBC Radio ꢀ
ꢄꢁ BBC Radio ꢁ
ꢅꢁ heat
Vida00ꢀb
Vida00ꢁb
vida00ꢂb
vida00ꢃb
2ꢃ uKTV Style
2ꢄ Discovery
2ꢅ Discoveryh&l
1ꢂ Cartoon Nwk
ꢀꢀ Boomerang
1ꢂ Ch 1ꢂ
1ꢃ QVC
ꢆ1 MOJO
1. Press the D.MeNu button to display the DTV menu.
1ꢄ uKTV Gold
ꢂꢂ Ttext holidays
ꢅ00 ARD-MhP-Data
6
More
2. Press the ▲ or ▼ button to select "Channel", then press the
Previous Page
Move
NextPage
Favourites
TV
eNTeR/OK button.
Watch
Return
ꢀ. Press the ▲ or ▼ button to select "Channel List".
Press the eNTeR/OK button.
ꢁ. Press the ▲ or ▼ button to select "All", "Favourites" or "Default".
Press the eNTeR/OK button.
ꢂ. Press the yellow button to toggle between your favourite channels and all channels.
Your favourite channels are only displayed if they were previously set in the "Editing Your
Favourite Channels" menu (refer to page 33).
ꢃ. Press the red or green button to display the previous or next channel List page.
ꢄ. Press the ▲ or ▼ button to select a channel to be tuned.
Press the eNTeR/OK button.
The channel number, name and an icon are displayed in the top left corner while changing the
channel. The channel number and name are displayed if the channel is one of the all channels,
and a icon if the channel is one of the favourite channels.
ꢅ. Press the blue button to toggle between your TV, Radio, Data/Other and All.
ꢆ. Press the Ch lIST button to exit from the channel List
Displaying Programme Information
While viewing a channel, additional information about the
current programme may be displayed.
1. While viewing a programme, press the INFO button.
The programme information is displayed.
1ꢁ:ꢀ0 Set 1 Sep
2. To exit from banner information, press the INFO button.
AII Channels
A
1 AFDO,1ꢃ:ꢆ
AFDO 1ꢃ:ꢆ
No Block
SD
1ꢁ:ꢀ0~1ꢁ:ꢀꢀ
Contains video with AFD O; coded frame
is 1ꢃ:ꢆ
Stereo
Subtitle
english
exit
english - ꢀꢂ
Download from Www.Somanuals.com. All Manuals Search And Download.
Viewing the ePG (electronic Programme Guide) Information
Now & Next Guide
The ePG (electronic Programme Guide) information is
13:28 Wed 16 Feb
provided by the broadcasters. Programme entries may
appear blank or out of date as a result of the information
Extreme Machines: Armoured Cars
INFO
broadcast on a given channel. The display will dynamically
Now
Next
update as soon as new information becomes available.
Now & Next Guide
For the six channels indicated in the left-hand column,
displays the Current programme and the Next programme
information.
Watch
Full Guide
Favourites
Exit
Full Guide
13:28 Wed 16 Feb
Full Guide
Extreme Machines: Armoured Cars
Displays the programme information as time ordered One
hour segments. Two hours of programme information is
displayed which may be scrolled forwards or backwards
in time.
INFO
Today
13:00
14:00
1. Press the D.MeNu button to display the DTV menu.
2. Press the eNTeR/OK button, to select "Guide".
Watch
Now/Next
Favourites
-24Hours
+24Hours
Exit
ꢀ. Press the ▲ or ▼ button to select "Now & Next Guide" or
"Full Guide".
Press the eNTeR/OK button.
You can also display the guide menu simply by pressing
the GuIDe button.
ꢁ.
To...
Then...
• Select a programme by pressing
the , q, , button.
Watch a programme in the EPG list
• Press the eNTeR/OK button.
If the next program is selected, it is scheduled with the clock icon
displayed. If the eNTeR/OK button is pressed again, the scheduling is
canceled with the clock icon gone. For details about scheduling
programmes, refer to the next page.
• Select a programme of your choice by
pressing the , q, , button.
View programme information
• Press the INFO button when the
programme of your choice is
highlighted.
Toggle between the "Now & Next
• Press the red button repeatedly.
Guide" or "Full Guide"
Display the "Favourites" and the "All
• Press the green button repeatedly.
Channels" list
Scrolls backwards quickly (24 hours).
Scrolls forward quickly (24 hours).
Exit the guide
• Press the yellow button repeatedly.
• Press the blue button repeatedly.
• Press the EXIT button.
The programme title is on the upper part of the screen center. Please click on INFO button for
the detailed information. Channel Number, Running Time, Status Bar, Parental Level, Video Quality
Information(HD/SD), Sound Modes, Subtitle or Teletext, Languages of Subtitle or Teletext and
brief summary of the highlighted programme are included on the detailed information. "..." will be
appeared if the summary is long.
Six channels are displayed. To scroll between channels, move to a channel using the ▲ or ▼
button. To display page by page, use the P or
english - ꢀꢃ
Download from Www.Somanuals.com. All Manuals Search And Download.
button.
using the Scheduled list
Scheduled list
(No programmes)
If you make a scheduled viewing list of programs you may
like to see, the channel will be automatically switched to the
scheduled program at the scheduled time even if you are
watching another program.
1. Press the D.MeNu button to display the DTV menu.
2. Press the eNTeR/OK button, to select "Guide".
Add Programme
ꢀ. Press the ▲ or ▼ button to select "Scheduled List", then
Return
press the eNTeR/OK button.
ꢁ. Press the red button.
The channel will be switched to the scheduled program.
ꢂ. Press the eNTeR/OK button to select an item and adjust with
the ▲ or ▼ button .
Scheduled list
Tuesday 22 Apr
ꢅ01 RaiTre
1ꢂ:ꢀ0 ~ 1ꢃ:00
Once
You can also set hour and minute by pressing the number
buttons on the remote control.
•
•
•
•
Channel: Set the channel.
Time: Set the time.
Date: Set Year, Month and Day.
Frequency: Set the frequency.
Add Programme
Edit
Delete
("Once", "Daily" or "Weekly")
Move
Return
ꢃ. After setting the schedule, Press the red button.
ꢄ. Press the exIT button to exit.
•
•
•
•
•
Save: Save the adjusted schedule.
Cancel: Cancel the adjusted schedule.
Add Programme: Add a new schedule.
edit: Re-adjust the selected schedule.
Delete: Delete the selected schedule.
Scheduled list
Channel
ꢅ02 Raiuno
Time
Date
1ꢂ : 20 to -- : --
Tue 22 Apr 200ꢄ
Once
Frequency
Save
Cancel
Adjust
Move
Return
Setting the Default Guide
You can preset the default guide style.
Guide
Now & Next Guide
Full Guide
Scheduled list
Default Guide
1. Press the D.MeNu button to display the DTV menu.
2. Press the eNTeR/OK button, to select "Guide".
:
Now/Next
ꢀ. Press the ▲ or ▼ button to select "Default Guide", then press
Full Guide
the eNTeR/OK button.
ꢁ. Select "Now/Next" or "Full Guide" using the ▲ or ▼ button,
Move
enter
Return
and press the eNTeR/OK button.
ꢂ. Press the exIT button to exit.
You can select these options
by simply pressing the GuIDe
button on the remote control.
english - ꢀꢄ
Download from Www.Somanuals.com. All Manuals Search And Download.
Viewing All Channels and Favourite Channels
In the ePG menu, you can display all channels or favourite
channels.
1. Press the D.MeNu button to display the DTV menu.
2. Press the eNTeR/OK button again, to select "Guide".
ꢀ. Select the your required guide ("Now & Next Guide" or "Full
Now & Next Guide
13:28 Wed 16 Feb
Extreme Machines: Armoured Cars
INFO
Guide") by pressing the ▲ or ▼ button.
Now
Next
ꢁ. Press the eNTeR/OK button.
ꢂ. Press the green button.
All the channel lists and the favorite channel lists will be
toggled.
Watch
Full Guide
Favourites
Exit
ꢃ. Select a programme of your choice by pressing the ▲, ▼,
◄ or ► button.
ꢄ. Press the INFO button to display information about the
highlighted programme.
Full Guide
ꢅ. When the Edit Favourite Channels list has not been set up:
13:28 Wed 16 Feb
•
"The favourites list is empty.
Extreme Machines: Armoured Cars
Would you like to choose your favourites now?" message is
displayed.
Select "Yes".
INFO
The favourites list is empty.
Would you like to choose your
favourites now?
Today
4:00
•
Yes
No
The "Edit Favourite Channels" menu is displayed.
If you select "No", all channels will remain unchanged.
• To edit the favourite channels, refer to page 33 for more
details.
Watch
Now/Next
Favourites
-24Hours
+24Hours
Exit
ꢆ . Press the exIT button to exit.
"All Channels" is the list of channels that have been scanned by
the channel list update.
All channels are displayed in the all channel mode.
"Favourites" (favourite channels) is the list of channels that has
been set in the "Edit Favourite Channels" menu (refer to page 33).
Adjusting the Menu Transparency
Setup
Menu Transparency :
You can set the transparency of the menu.
high
1. Press the D.MeNu button to display the DTV menu.
Change PIN
Parental lock
Subtitle
Medium
low
:
Opaque
: Normal
2. Press the ▲ or ▼ button to select "Setup", then press
the eNTeR/OK button.
Subtitle Mode
▼
ꢀ. Press the ▲ or ▼ button to select "Menu Transparency"
then press the eNTeR/OK button.
ꢁ. Select the required option ("High", "Medium", "Low" or
"Opaque") by pressing the ▲ or ▼ button and press the
eNTeR/OK button to change the setting.
Move
enter
Return
ꢂ. Press the exIT button to exit.
english - ꢀꢅ
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up the Parental lock
This feature allows you to prevent unauthorized users, such
as children, from watching unsuitable programmes by a
ꢁ-digit PIN (Personal Identification Number) code that is
defined by the user. The on-screen menu will instruct you to
assign a PIN code (you can change it later, if necessary).
Setup
Menu Transparency : Medium
Change PIN
Parental lock
Subtitle
Subtitle Mode
▼
: On
: Normal
Parental lock
Move
enter
Return
1. Press the D.MeNu button to display the DTV menu.
2. Press the ▲ or ▼ button to select "Setup", then press
Parental lock
the eNTeR/OK button.
enter PIN
ꢀ. Press the ▲ or ▼ button to select "Parental Lock.", then
press the eNTeR/OK button.
ꢁ.
The "Enter PIN" is displayed.
ꢂ. Enter your current 4-digit PIN code by using the numeric
buttons (0~9).
enter PIN
Return
The default PIN code for a new TV set is 0000.
If you enter an invalid PIN code,the "Invalid PIN code.
Please try again." message is displayed.
Parental lock
▲
Parental Rating:
ꢃ. Press the eNTeR/OK button again, to select "Parental
A
dult
3
4
5
6
7
Rating".
ꢄ. Press the ▲ or ▼ button to select the age rating you want to
lock out. Press the eNTeR/OK button.
▼
Move
Return
Change PIN
enter
1. Press the D.MENU button to display the DTV menu.
2. Press the ▲ or ▼ button to select "Setup", then press the
Setup
eNTeR/OK button.
Menu Transparency : Medium
Change PIN
Parental lock
ꢀ. Press the ▲ or ▼ button to select "Change PIN", then press
the eNTeR/OK button.
Subtitle
Subtitle Mode
▼
: On
: Normal
The "Enter PIN" is displayed.
ꢁ. Enter your current 4-digit PIN code by using the numeric
Move
Return
buttons (0~9).
enter
The "Enter New PIN" is displayed.
ꢂ. Enter your new PIN code by using the numeric buttons (0~9)
The "Confirm New PIN" is displayed.
Change PIN
Confirm New PIN
ꢃ. Re-enter your new PIN code to confirm by using the numeric
buttons (0~9).
Your PIN code has been changed successfully.
The Your PIN code has been changed successfully
message is displayed.
OK
ꢄ. Press the eNTeR/OK button.
enter PIN
Return
ꢅ. Press the exIT button to exit.
If you forget the PIN code, press the remote control
buttons in the following sequence, which resets the PIN to
0-0-0-0: POWeR (Off), MuTe, ꢅ, 2, ꢁ, POWeR (On).
english - ꢀꢆ
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the Subtitle
Setup
Menu Transparency : Medium
Change PIN
You can activate and deactivate the subtitles.
1. Press the D.MeNu button to display the DTV menu.
Parental lock
2. Press the ▲ or ▼ button to select "Setup", then press the
Subtitle
Subtitle Mode
▼
:
Off
: N
On
eNTeR/OK button.
ꢀ. Press the ▲ or ▼ button to select "Subtitle ", then press the
eNTeR/OK button.
Move
Return
ꢁ. Select "On" by pressing the ▲ or ▼ button. Press the
enter
eNTeR/OK button.
ꢂ. Press the exIT button to exit.
Setting the Subtitle Mode
Setup
use this menu to set the Subtitle Mode. "Normal" under
the menu is the basic subtitle and "hard of hearing" is the
subtitle for a hearing-impaired person.
Menu Transparency : Medium
Change PIN
Parental lock
Subtitle
Subtitle Mode
▼
: On
1. Press the D.MeNu button to display the DTV menu.
:
Normal
2. Press the ▲ or ▼ button to select "Setup", then press the
hard of hearing
eNTeR/OK button.
Move
Return
ꢀ. Press the ▲ or ▼ button to select "Subtitle Mode", then
enter
press the eNTeR/OK button.
ꢁ. Press the ▲ or ▼ button to select "Normal" or
"Hard of hearing". Press the eNTeR/OK button.
ꢂ. Press the exIT button to exit.
If the programme you are watching does not support the
"Hard of hearing" function, "Normal" automatically activates
even though "Hard of hearing" mode is selected.
Selecting the Audio Format
You can only hear Dolby Digital sound through the audio
receiver connected through an optical cable. You can only
hear PCM sound through the main speaker.
When sound is emitted from both the main speaker and the
audio receiver, a sound echo may occur due to the decoding
speed difference between the main speaker and the audio
receiver. In this case, use the internal mute function.
Setup
Audio Format
Digital Text
Time Zone
System
: PCM
: enable
1. Press the D.MeNu button to display the DTV menu.
Move
enter
Return
2. Press the ▲ or ▼ button to select "Setup", then press the
eNTeR/OK button.
ꢀ. Press the ▲ or ▼ button to select "Audio Format", then press the eNTeR/OK button.
ꢁ. Press the ▲ or ▼ button to select "PCM" or "Dolby Digital". Press the eNTeR/OK button.
ꢂ. Press the exIT button to exit.
The Audio Format appears according to the broadcasting signal.
Dolby digital sound is only available when the TV is connected with an external speaker using an
optical cable.
english - ꢁ0
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting the Digital Text
If the programme is broadcast with digital text, this feature is
enabled.
Setup
: PCM
Audio Format
Digital Text
Time Zone
System
1. Press the D.MeNu button to display the DTV menu.
:
Disable
enable
2. Press the ▲ or ▼ button to select "Setup", then press the
eNTeR/OK button.
ꢀ. Press the ▲ or ▼ button to select "Digital Text", then press
the eNTeR/OK button.
Move
enter
Return
ꢁ. Press the ▲ or ▼ button to select "Disable" or
"Enable". Press the eNTeR/OK button.
ꢂ. Press the exIT button to exit.
MHEG(Multimedia and Hypermedia Information Coding Experts Group) An International standard
for data encoding systems used in multimedia and hypermedia. This is at a higher level than the
MPEG system which includes data-linking hypermedia such as still images, character service,
animation, graphic and video files as well as multimedia data. MHEG is user runtime interaction
technology and is being applied to various fields including VOD (Video-On-Demand), ITV
(Interactive TV), EC (Electronic Commerce), tele-education, tele-conferencing, digital libraries and
network games.
Selecting the Time Zone (Spain only)
Select the time zone where locate
Setup
1. Press the D.MeNu button.
Audio Format
Digital Text
Time Zone
System
: PCM
: enable
2. Press the ▲ or ▼ button to select "Setup", then press the
eNTeR/OK button.
ꢀ. Press the ▲ or ▼ button to select "Time Zone", then press
the eNTeR/OK button.
ꢁ. Select the time zone where you locate by pressing the
▲ or ▼ button.
Move
enter
Time Zone
Return
Press the eNTeR/OK button.
The following options are available
The Iberian Peninsula and Balears Islands -
Canarian Islands
The Iberian Peninsula and Balears Islands
Canarian Islands
ꢂ. Press the exIT button to exit.
Adjust
Select
Return
Viewing Product Information
You can view your product information. For service or
repair, please contact a Samsung approved dealer.
Product Information
Software Version: T_JSM22DeuC_000ꢀ
Firmware Version: T_eMMA2DeuB_0101
1. Press the D.MeNu button to display the DTV menu.
2. Press the ▲ or ▼ button to select "Setup", then press the
eNTeR/OK button.
ꢀ. Press the ▲ or ▼ button to select "System", then press
the eNTeR/OK button.
Return
ꢁ. Press the eNTeR/OK button again, to select "Product
Information".
The Product Information menu is selected.
- Software Version, Firmware Version
ꢂ. Press the exIT button to exit.
english - ꢁ1
Download from Www.Somanuals.com. All Manuals Search And Download.
Checking the Signal Information
You can get information about the signal status.
Signal Information
Service: ?
1. Press the D.MeNu button to display the DTV menu.
Service ID: 0000
Multiplex: ? (TSID 0000, ONID 0000)
Network: ? (ID 0000)
2. Press the ▲ or ▼ button to select "Setup", then press the
eNTeR/OK button.
Bit error level:
10
0
ꢀ. Press the ▲ or ▼ button to select "System", then press the
Signal Strength:
eNTeR/OK button.
Return
ꢁ. Press the ▲ or ▼ button to select "Signal Information",
then press the eNTeR/OK button.
ꢂ. Press the exIT button to exit.
If the signal status is poor, the "No signal." message is displayed.
upgrading the Software
To keep your product up-to-date with new Digital Television
features then software upgrades are periodically broadcast
as part of the normal Television signal.
It will automatically detect these signals and display the
software upgrade banner. You are given the option to install
the upgrade.
System
Product Information
Signal Information
Software upgrade
Common Interface
Reset
1. Press the D.MeNu button to display the DTV menu.
2. Press the ▲ or ▼ button to select "Setup", then press the
Move
enter
Return
eNTeR/OK button.
Software upgrade
ꢀ. Press the ▲ or ▼ button to select "System", then press the
Software Information
Manual upgrade
eNTeR/OK button.
Standby Mode upgrade : On
ꢁ. Press the ▲ or ▼ button to select "Software Upgrade",
then press the eNTeR/OK button.
ꢂ. Press the ▲ or ▼ button to select "Software Information",
"Manual Upgrade" or "Satandby Mode upgrade".
Press the eNTeR/OK button.
Move
enter
Return
Software Information
Press the eNTeR/OK button, then the current software
version is shown. To display the software version
information, press the eNTeR/OK button again.
To switch to an alternative version, press the red button.
Press the blue button to reset, activate the upgrade and restart.
Software upgrade
Software Information
Manual upgrade
Standby Mode upgrade : On
Manual upgrade
Press the eNTeR/OK button to search for new software
from the currently broadcasting channels.
Move
enter
Return
Standby Mode upgrade : On/Off
Software upgrade
Press the eNTeR/OK button. To continue software
upgrade with master power on, Select On by pressing
the ▲ or ▼ button.
Software Information
Manual upgrade
Standby Mode upgrade : On
45 minutes after entering standby mode, a manual
upgrade is automatically conducted. Since the power
of the unit is turned on internally, the screen may be
on slightly for the LCD product. This phenomenon may
continue for more than 1 hour until the software upgrade
is completed.
Move
enter
Return
ꢃ. Press the exIT button to exit.
english - ꢁ2
Download from Www.Somanuals.com. All Manuals Search And Download.
Viewing Common Interface
This contains information on CAM inserted in the CI slot and
displays it.
Application Info
Type : CA
Manufacturer : Channel Plus
1. Press the D.MeNu button to display the DTV menu.
Info : Top up TV
2. Press the ▲ or ▼ button to select "Setup", then press the
eNTeR/OK button.
ꢀ. Press the ▲ or ▼ button to select "System", then press the
eNTeR/OK button.
Return
ꢁ. Press the ▲ or ▼ button to select "Common Interface",
then press the eNTeR/OK button.
ꢂ. Press the eNTeR/OK button to display the information for
your application.
ꢃ. Press the exIT button to exit.
The Application Info inserting is about the CI CARD.
You can install the CAM anytime whether the TV is ON or
OFF.
1.Purchase the CI CAM module by visiting your nearest dealer
or by phone.
2.Insert the CI CARD into the CAM in the direction of the
arrow until it fits.
ꢀ.Insert the CAM with the CI CARD installed into the common
interface slot.
(Insert the CAM in the direction of the arrow, right up to the end
so that it is parallel with the slot.)
ꢁ. Check if you can see a picture on a scrambled signal
channel.
Selecting the CI (Common Interface) Menu
CI Menu
This enables the user to select from the CAM-provided menu.
Main menu
Module information
Smart card information
language
1. Press the D.MeNu button to display the DTV menu.
2. Press the ▲ or ▼ button to select "Setup", then press the
Software Download
eNTeR/OK button.
ꢀ. Press the ▲ or ▼ button to select "System", then press the
Press OK to select or exit to quit
eNTeR/OK button.
Move
enter
exit
ꢁ. Press the ▲ or ▼ button to select "Common Interface",
then press the eNTeR/OK button.
ꢂ. Select to "CI Menu" by pressing the ▲ or ▼ button and
press the eNTeR/OK button.
ꢃ. Select the required option by pressing the ▲ or ▼ button, and
press the eNTeR/OK button.
ꢄ. Press the exIT button to exit.
Select the CI Menu based on the menu PC Card.
english - ꢁꢀ
Download from Www.Somanuals.com. All Manuals Search And Download.
Resetting
You can reset the values stored to the factory default
values.
Reset
enter PIN
The Reset operation deletes all channel information and
user preferences returning all values to their default
factory state.
1. Press the D.MeNu button to display the DTV menu.
2. Press the ▲ or ▼ button to select "Setup", then press the
enter PIN
Return
Reset
eNTeR/OK button.
ꢀ. Press the ▲ or ▼ button to select "System", then press
WARNING: All channel settings and user
preferences will be lost and returned to
the factory defaults. It is recommended
that a reset is performed only when
serious problems are experienced.
the eNTeR/OK button.
ꢁ. Press the ▲ or ▼ button to select "Reset", then press the
eNTeR/OK button.
ꢂ. The "Enter PIN" screen will appear.
ꢃ. Enter your current 4-digit PIN code by using the numeric
buttons (0~9).
Return
The warning message is displayed.All values will be
reset by pressing the coloured buttons (red, green,
yellow and blue)in turn.
ꢄ. Press the exIT button to exit.
Selecting the Preferred language (Subtitle, Audio or Teletext)
You can change the default value for subtitle, audio teletext
languages.
language
Audio language
Displays the language information for the incoming stream.
Subtitle language
Teletext language
1. Press the D.MeNu button to display the DTV menu.
Preference
2. Press the ▲ or ▼ button to select "Language", then press
the eNTeR/OK button.
ꢀ. Press the ▲ or ▼ button to select " Audio Language",
Move
enter
Return
"Subtitle Language" or "Teletext Language".
Press the eNTeR/OK button.
language
ꢁ. Select a particular language by pressing the ▲ or ▼ button
repeatedly.
Audio language
Subtitle language
Teletext language
Preference
Press the eNTeR/OK button.
English is the default in cases where the selected
language is unavailable in the broadcast.
ꢂ. Press the exIT button to exit.
While viewing a programme, the subtitle can be selected.
Move
enter
language
Return
While viewing a programme, audio languages can be
selected.
Audio language
Subtitle language
Teletext language
Preference
Move
enter
Return
english - ꢁꢁ
Download from Www.Somanuals.com. All Manuals Search And Download.
Preference
This menu consists of ꢃ sub-menus:
language
Audio language
Primary Subtitle language, Secondary Subtitle language,
Primary Audio language, Secondary Audio language,
Primary Teletext language and Secondary Teletext language.
Subtitle language
Teletext language
Preference
Using this feature, users can select one of the languages
(English, German, Italian, Swedish, French, Welsh, Gaelic,
Irish, Danish, Finnish, Norwegian, Spanish, Czech and Greek).
The language selected here is the default when the user selects
a channel.
Move
enter
Return
Press the ▲ or ▼ button to select required menu (Primary Subtitle Language, Secondary Subtitle
Language, Primary Audio Language, Secondary Audio Language, Primary Teletext Language or
Secondary Teletext Language), then press the eNTeR/OK button. The options of the selected menu
are displayed.
Press the ▲ or ▼ button to select required option (English, German, Italian, Swedish, French,
Welsh, Gaelic, Irish, Danish, Finnish, Norwegian, Spanish, Czech or Greek), then press the
eNTeR/OK button.
If you change the language setting, the Subtitle Language, Audio Language and the Teletext
Language of the Language menu (refer to page 44) are automatically changed to the selected
language.
The Subtitle Language, Audio Language and the Teletext Language of the Language menu show
a list of languages supported by the current channel and the selection is highlighted. If you change
this language setting, the new selection is only valid for the current channel. The changed setting
does not change the setting of the Primary Subtitle Language, Primary Audio Language or the
Primary Teletext Language of the Preference menu.
english - ꢁꢂ
Download from Www.Somanuals.com. All Manuals Search And Download.
Teletext Feature
Most television stations provide written information services
via teletext. The index page of the teletext service gives you
information on how to use the service. In addition, you can
select various options to suit your requirements by using the
remote control buttons.
For teletext information to be displayed correctly, channel
reception must be stable. Otherwise, information may be
missing or some pages may not be displayed.
1
2
TV/DTV
Exit from the teletext display.
(index)
Used to display the index (contents) page at any time while
you are viewing teletext.
3
4
5
(teletext on/mix)
Press to activate teletext mode after selecting the channel
providing the teletext service. Press it twice to overlap the
teletext with the current broadcasting screen.
(size)
Press to display the double-size letters in the upper half of the
screen. For lower half of the screen, press it again. To display
normal screen, press it once again.
(mode)
Press to select the teletext mode (LIST/FLOF). If you press it
in the LIST mode, it switches into the List save mode. In the
List save mode, you can save teletext page into list using the
(store) button.
6
7
8
9
0
(sub-page)
Used to display the available sub-page.
(page up)
Used to display the next teletext page.
(page down)
Used to display the previous teletext page.
(cancel)
Used to display the broadcast when searching for a page.
(reveal)
Used to display the hidden text (answers to quiz games, for example). To display normal screen,
press it again.
!
Coloured buttons (red/green/yellow/blue)
If the FASTEXT system is used by a broadcasting company, the different topics covered on a
teletext page are colour-coded and can be selected by pressing the coloured buttons. Press one
of them corresponding to the required. The page is displayed with other coloured information that
can be selected in the same way. To display the previous or next page, press the corresponding
coloured button.
@
#
(hold)
Used to hold the display on a given page if the selected
page is linked with several secondary pages which follow on
automatically. To resume, press it again.
(store)
Used to store the teletext pages.
You can change teletext pages by pressing the numeric buttons
on the remote control.
english - ꢁꢃ
Download from Www.Somanuals.com. All Manuals Search And Download.
The teletext pages are organized according to six categories:
Part
Contents
A
B
C
D
E
F
Selected page number.
Broadcasting channel identity.
Current page number or search indications.
Date and time.
Text.
Status information.
FASTEXT information.
Teletext information is often divided between several pages
displayed in sequence, which can be accessed by:
Entering the page number
Selecting a title in a list
Selecting a coloured heading (FASTEXT system)
Press the TV/DTV button to exit from the teletext display.
Setting up Your Remote Control
After it has been set up properly, your remote control can operate in five
different modes: TV, DVD, Cable, Set-Top Box, VCR. Pressing the cor-
responding button on the remote control allows you to switch between
these modes and control whichever piece of equipment you choose.
The remote control might not be compatible with all DVD Players,
VCRs, Cable boxes and Set-Top Boxes.
Setting up the Remote to Operate Your VCR, CABle, DVD and STB
1. Turn off your VCR, CABle, DVD and STB.
2. Press the VCR, CABle, DVD and STB button on your TV’s remote con-
trol.
ꢀ. Press the SeT button on your TV’s remote control.
ꢁ. Using the number buttons on your remote control, enter three digits of the
VCR code listed on pages 48~50 of this manual for your brand of VCR.
Make sure you enter three digits of the code, even if the first digit is a "0".
(If more than one code is listed, try the first one.)
ꢂ. Press the POWeR button on the remote control.
Your VCR should turn on if your remote is set up correctly.
If your VCR does not turn on after set up, repeat steps 2, 3 and 4, but try
one of the other codes listed for your brand of VCR.
If no other codes are listed, try each VCR code, 000 through 080.
english - ꢁꢄ
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Control Codes
VCR
Brand
Code
Brand
Code
SAMSUNG
ADMIRAL
AIWA
000 001 002 003 004 005 077 078 079
MONTGOMERY WARD
MTC
020
020
002 025
025
MULTITECH
NEC
002 005 025 038
007 008 018 026 037 062 064
020
AKAI
004 027 032
AUDIO DYNAMICS
BELL&HOWELL
BROKSONIC
CANDLE
007 026
OPTIMUS
ORION
018
073 074 075 076
021 056 071 072
019 041 075
008
022
PANASONIC
PENTAX
002 003 006 008 015 055
CANON
021 056
PENTEX
RESEARCH+
CITIZEN
002 003 006 008 015 055
PHILCO
021 056 059
COLORTYME
CRAIG
007
PHILIPS
021 080
002 024
PIONEER
PORTLAND
PROSCAN
QUARTZ
QUASAR
019 026 039 053
CURTIS MATHES
DAEWOO
DB
002 007 008 017 021 025 056 064 066
015 049 055
003 010 011 012 013 014 015 016
017
007 026
017
018
DIMENSIA
DYNATECH
ELECTROHOME
EMERSON
021 056
025
RADIO SHACK/
REALISTIC
006 018 020 021 024 025 029 034 048 056
034
001 003 006 021 022 025 030 032 034 040
047 050 052 060 063 065 066 067 069 073
RCA
002 017 019 021 035 041 043 057 068 076
SANSUI
026
FISHER
018 024 028 029 048 051 061
SANYO
018 024
FUNAI
025
SCOTT
003 047 052 067
GENERAL ELECTRIC
GO VIDEO
HARMAN KARDON
HITACHI
INSTANT REPLAY
JC PENNEY
JCL
002 005 017 021 056
SEARS
006 018 019 024 028 029 041 048 051
002
SHARP
020 034 045 015
007
SHIMTOM
SIGNATURE
SONY
027 033 038 058
019 025 041 042 074
025
021
027 033 044
002 007 018 019 021 026 037 041 054 056
SYLVANIA
SYMPHONIC
TANDY
021 025 056 059
007 008 018 021 026 037
025
JVC
081 082 083
018 025
KENWOOD
KLH
007 008 018 021 026 037
TASHIKA
TATUNG
006
070
037
KONIA
036
TEAC
025 037 068
LG(Goldstar)
LIOYD
006 007 008 009 010
TECHNICS
TEKNIKA
TMK
021
025
006 021 025 031
LOGIK
038
066
LXI
025
TOSHIBA
TOTEVISION
UNITECH
VECTOR RESEARCH
VICTOR
003 019 029 051 052
MAGNAVOX
MARANTZ
MARTA
021 056 059
002 006
007 008 018 021 026 037 062
002
006
007 026
MEI
021
026
MEMOREX
MGA
006 021 024 025
034
VIDEO CONCEPTS
VIDEOSONIC
WARDS
007 026
002
MIDLAND
MINOLTA
MITSUBISHI
005
002 003 006 019 020 021 024 025 034 038 041
007 008 018 026 037
019 041 075
019 034 041 046
YAMAHA
ZENITH
023 027 033
english - ꢁꢅ
Download from Www.Somanuals.com. All Manuals Search And Download.
CABle BOx
Brand
Code
Brand
Code
SAMSUNG
GI
000 001 002 003 004 005 006 007
REGENCY
SA
015 023
041
042 043
HAMLIN
HITACHI
JERROLD
MACOM
MAGNAVOX
OAK
003 024 031
025 030
SCIENTIFIC ATLAN
SPRUCER
STARGATE 2000
SYLVANIA
TEXSCAN
TOCOM
042 043
022
038 039
036
025 030
016
019 023 028
026
016
032
PANASONIC
PHILIPS
PIONEER
RCA
003 022 027 037 044
019 021 023 028
004 018 020 044
014 022 040
003
UNIVERSAL
VIEWSTAR
WAMER AMEX
ZENITH
033 034
019 021 023 028
046
017 029 035 037 045
REGAL
SAMSuNG DVD
Product
Code
Product
Code
DVD
000 001 002
Home Theater VCR COMBO
HDD Recorder COMBO
TWIN TRAY COMBO
STB DVD COMBO
DVD Receiver
014 015 016
DVDR
003 004
017
018
019
020
021
BD Record
VCR COMBO
VCR Record
DHR COMBO
005 006
007 008 009 010 011
012
013
AV Receiver
DVD
Brand
Code
Brand
Code
092
ANAM
030
INTEGRA
JBL
AUDIOVOX
AUDIOLOGIC
ANABA
075
091
085
JVC
022 033 115 116
072
JATON
KENWOOD
KISS
073
APEX DIGITAL
AIWA
070 071 074 086 083 084 088 111 112
051 108 109
073
114
BROKSONIC
BLAUPUNKT
B&K
062
KONKA
KLH
059 100 106 107
074 075
025 031
057
074
122 123
LG(Goldstar)
LOEWE
LASONIC
CURTIS MATHES
CYBER HOME
CLARION
CIRRUS
027
077 078 079 082
058
080 125
081
MOBILE
AUTHORITY
054
MEMOREX
MALATA
055
CYBER HOME
CINEVISION
DAEWOO
DENON
065
056
095
MAGNAVOX
MINTEK
076 093
074 094
073
066
146
MONYKA
NORCENT
NEXT BASE
NEC
FARENHEIT
FISHER
067 068
090
048 049 050
052
GPX
060
053
GO VIDEO
GE
061 089 133 135
069 074
074
NANTAUS
NESA
144
074
GREENHILL
HITACHI
OPTOMEDIA
ELECTRONICS
105
064 113
071
HITEKER
HOYO
OPTIVIEW
ONKYO
072
073
076 092 119
044 045
046 047
023
HARMAN / KARDON
IRT
091 110
089
PHILCO
PRINCETON
PROSCAN
english - ꢁꢆ
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD
Brand
Code
Brand
Code
145
PANASONIC
PHILIPS
ROTEL
RIO
024 034 124 134 136 137 138
THOMSON
TOSHIBA
TECHNICS
TVIEW
036 076
028 062 076
139
117 118
120
072
RCA
023 035 074 075 131 132
TOKAI
073
RAITE
073
TEAC
096
ROWA
038
TECHWOOD
TREDEX
097
SAMPO
SONY
104
098 099 101
076
026 029 126 127 128 129 130 141
URBAN CONCEPTS
VENTURER
VOCOPRO
YAMAHA
YAMAKAWA
XWAVE
SHERWOOD
SVA
039 041
042
075
102
SYLVANIA
SHARP
SANSUI
SANYO
SHINSONIC
043 093
140
032 063
040 073
103
062
062 090
094
ZENITH
076 121
SAMSuNG SeT-TOP BOx
Product
Code
Ground wave STB
CABLE STB
Satellite STB
000 001 002 008 01ꢀ
000 004 008 01ꢀ
000 003 008 01ꢀ
SeT-TOP BOx
Brand
Code
023
Brand
Code
ALPHASTAR
ANAM
MAGNAVOX
MEMOREX
MOTOROLA
MACOM
016 021 036 038 039 040 041 042
043
016
CHANNEL
MASTER
018 034
064
018
CROSSDIGITAL
CHAPARRAL
DIRECT TV
019
035
MITSUBISHI
NEXT LEVEL
PHILIPS
015
047 048 064
015 016 017 019 022 045 060 061 062
065 066 067 068
015 016 017 021 033 036 038 039 040
041 042 067
DAEWOO
074
PRIMESTAR
PANASONIC
PAYSAT
046 049 050 063
DISH NETWORK
SYSTEM
069 070
058 059 061 062
016
DISHPRO
DRAKE
069
PROSCAN
RCA
065 066
018 024 032
051 052 053 065 066
DX ANTENNA
ECHOSTAR
EXPRESSVU
GOI
027
RADIOSHACK
REALISTIC
STAR TRAK
STS
064
025 069 070 071
057
069
026
069
020 027
GE
065
SKY
031
GENERAL INSTRUMENT
HTS
046 047 048 063 064
SKY LIFE
SHACK
005 006 007
069
064
HOME CABLE
HITACHI
056
STAR CHOICE
SONY
064
022
054 060
HUGHES NETWORK
IQ
015 017
020
TOSHIBA
015 017 028 029 030 072
060 066
ULTIMATE TV
UNIDEN
ZENITH
IQ PRISM
020
016 021 037 055 056 057
024 031 068
JANEIL
059
JERROID
JVC
063
069 070
044 073
LG(Goldstar)
english - ꢂ0
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up Your PC Software (Based on Windows xP)
The Windows display-settings for a typical computer are shown below. The
actual screens on your PC may be different depending upon your particular
version of Windows and your particular video card. even if your actual
screens look different, the same, basic set-up information will apply in almost
all cases. (If not, contact your computer manufacturer or Samsung Dealer.)
1. First, click on "Control Panel" on the Windows start menu.
2. When the control panel window appears, click on "Appearance and Themes"
and a display dialog-box will appear.
ꢀ. When the control panel window appears, click on "Display" and a display dia-
log-box will appear.
ꢁ. Navigate to the "Settings" tab on the display dialog-box.
The correct size setting (resolution): Optimum- 1440 x 900
If a vertical-frequency option exists on your display settings dialog box, the correct value is
"60" or "60 Hz". Otherwise, just click "OK" and exit the dialog box.
Display Modes
Both screen position and size will vary depending on the type of PC monitor and its resolution.
The resolutions in the table are recommended. (All resolutions between the supported limits are
supported)
D-Sub Input
horizontal
Frequency (khz)
Vertical
Frequency (hz)
Pixel Clock
Frequency (Mhz)
Sync Polarity
Mode
IBM
Resolution
(h/V)
640×350
720×400
640×480
31.469
31.469
31.469
70.086
70.087
59.940
25.175
28.322
25.175
+/-
-/+
-/-
VeSA
640×480
640×480
800×600
800×600
800×600
1024×768
1024×768
1024×768
1152×864
1152×864
1440×900
1440×900
37.861
37.500
37.879
48.077
46.875
48.363
56.476
60.023
53.783
67.500
55.935
70.635
72.809
75.000
60.317
72.188
75.000
60.004
70.069
75.029
59.959
75.000
59.887
74.984
31.500
31.500
40.000
50.000
49.500
65.000
75.000
78.750
81.750
108.000
106.500
136.750
-/-
-/-
+/+
+/+
+/+
-/-
-/-
+ /+
-/+
+/+
-/+
-/+
640×480
800×600
1024×768
35.000
43.750
57.672
70.000
70.000
72.000
28.560
45.500
78.434
-/+
-/+
-/-
VeSA GTF
hDMI/DVI Input
horizontal
Frequency (khz)
Vertical
Frequency (hz)
Pixel Clock
Frequency (Mhz)
Sync Polarity
Mode
IBM
Resolution
(h/V)
640×350
720×400
640×480
800×600
1024×768
1440×900
1440×900
31.469
31.469
31.469
37.879
48.364
55.935
70.635
70.086
70.087
59.940
60.317
60.000
59.887
74.984
25.175
28.322
25.175
40.000
65.000
106.500
136.750
+/-
-/+
-/-
+/+
-/-
VeSA
-/+
-/+
The interlace mode is not supported.
The set might operate abnormally if a non-standard video format is selected.
Separate and Composite modes are supported. SOG is not supported.
english - ꢂ1
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the PC
Coarse and Fine Tuning of the Image (Image lock):
The purpose of picture quality adjustment is to remove or
reduce picture noise.
If the noise is not removed by Fine-tuning alone, then adjust
the frequency as best as possible (coarse) and Fine-tune
again.
After the noise has been reduced, re-adjust the picture so that
it is aligned on the center of screen.
TV
Image lock
Coarse
Fine
ꢂ0
ꢂꢁ
1. Preset: Press the SOuRCe button to select PC mode.
Move
enter
Return
2. Press the MeNu button to display the menu.
Press the ▲ or ▼ button to select "Setup", then press the
eNTeR/OK button.
ꢀ. Press the ▲ or ▼ button to select "PC", then press the eNTeR/OK button.
ꢁ. Press the eNTeR/OK button to select "Image Lock".
ꢂ. Press the ▲ or ▼ button to select "Coarse" or "Fine", then press the eNTeR/OK button.
ꢃ. Press the
◄
or
►
button to adjust the screen quality.
Press the eNTeR/OK button.
ꢄ. Press the exIT button to exit.
Changing the Image Position:
Adjust the PC’s screen positioning if it does not fit the TV
screen.
TV
Position
1. Follow the "Coarse and Fine Tuning of the Image
(Image Lock)"
instructions number 1 to 3.
2. Press the ▲ or ▼ button to select "Position", then press the
eNTeR/OK button.
Move
enter
Return
ꢀ. Press the ▲ or ▼ button to adjusting the Vertical-Position.
Press the
◄
or
►
button to adjust the Horizontal-Position.
Press the eNTeR/OK button.
ꢁ. Press the exIT button to exit.
Adjusting the PC Screen Automatically (Auto Adjustment):
Auto adjustment allows the PC screen of set to self-adjust to
the incoming PC video signal. The values of fine, coarse and
position are adjusted automatically.
PC
TV
Image lock
Position
Auto Adjustment
Image Reset
1. Follow the "Coarse and Fine Tuning of the Image
(Image Lock)" instructions number 1 to 3.
2. Press the ▲ or ▼ button to select "Auto Adjustment", then
press the eNTeR/OK button.
Move
enter
Return
ꢀ. Press the exIT button to exit.
Initializing the Image Settings (Image Reset):
You can replace all image settings with the factory default
values.
PC
TV
Image lock
Position
Auto Adjustment
Image Reset
1. Follow the "Coarse and Fine Tuning of the Image
(Image Lock)" instructions number 1 to 3.
2. Press the ▲ or ▼ button to select "Image Reset", then press
the eNTeR/OK button.
ꢀ. Press the exIT button to exit.
Move
enter
Return
english - ꢂ2
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the home Theatre PC
You can view higher quality pictures by configuring the
screen settings in PC Mode.
If you set the "home Theatre PC" function to On, you can
configure the "Detail Settings" (when Picture Mode is
set to Standard or Movie) as in PC Mode.
Mode
: Custom
Setup
TV
Plug & Play
language
: english
Time
Game Mode
: Off
Blue Screen
: Off
Melody
: Medium
PC
home Theatre PC
light effect
energy Saving
: Off
1. Press the MeNu button to display the menu.
Press the ▲ or ▼ button to select "Setup", then press the
eNTeR/OK button.
:
In Watching TV
: Off
hDMI Black level
PIP
: low
Move
enter
Return
2. Press the ▲ or ▼ button to select "Home Theatre PC".
Setup
TV
Press the eNTeR/OK button.
Plug & Play
language
: english
ꢀ. Press the ▲ or ▼ button to select "Off" or "On".
Time
Game Mode
: Off
Press the eNTeR/OK button.
Blue Screen
: Off
Melody
: Medium
PC
ꢁ. Press the exIT button to exit.
Off
On
home Theatre PC
light effect
energy Saving
hDMI Black level
PIP
:
:
In Wachig TV
: Off
: low
This function is available only in PC mode.
Move
enter
Return
how to Adjust the Stand
1. Place the front of the TV onto a soft cloth or
cushion on a table as in Figure (1).
Button
- Align the TV bottom along the table edge.
2. Press on the center of the TV back. Adjust the
stand as in Figure (2) while pressing the button on
the back of the stand.
(1)
(2)
ꢀ. Place the TV on the table so that the TV sits safely.
how to Adjust the Angle of the TV
(2) Angle adjustment when converting
from Stand to Wall mount (1 → 3, 3 → 1)
(1) Angle adjustment when
using the TV on its stand.
(3) Angle adjustment when LCD
TV is wall-mounted
When you adjust the stand, press the button on the back of the stand.
1. Figure (1) shows the adjustment angle (-2°~14°) when you use the LCD on its stand.
Excessive tilting can turn the LCD TV over which may cause damage.
2. Figure (2) shows the adjustment angle (14°~80°) when you convert the LCD from stand-based use
to wall-mount.
ꢀ. Figure (3) shows the adjustment angle (0°~10°) when you mount the LCD TV to a wall.
You will hear a “Click” sound when changing the angle from 1 to 2 or 3 to 2.
english - ꢂꢀ
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing the Wall Mount Kit
Wall mount items (sold separately) allow you to mount the TV on the wall. For the detailed information on
installing the Wall Mount, see the instruction in the Wall Mount items. Contact a technician for installing
the wall bracket. Samsung Electronics is not responsible for any damage to the product or injury to
yourself or others if you elect to install the TV on your own.
Do not install your Wall Mount Kit while your TV is on. This may result in personal injury due to
electric shock.
Installing VeSA compliant mounting devices
1. Place the TV down on a soft cloth or cushion on a
Mounting pad
Button
table.
(sold separately)
2. Adjust the stand, pressing the button on the back of
the stand.
ꢀ. Align the mounting interface pad (not supplied) with
the holes in the stand bottom and secure it with the
four screws that come with the arm-type base, wall
mount hanger or other bases (not supplied).
(2)
(3)
using the Decoration Covers
1. When installing the TV on the wall without using
the stand, insert decoration covers into the holes
as described in the picture (1).
2. After inserting the decoration covers, fasten them
with 4 screws as described in the picture (2).
(2)
(1)
english - ꢂꢁ
Download from Www.Somanuals.com. All Manuals Search And Download.
using the Anti-Theft Kensington lock
The Kensington lock is a device used to physically fix the system when using it in a public place.
The locking device has to be purchased separately. The appearance and locking method may
differ from the illustration depending on the manufacturer. Please refer to the manual provided
with the Kensington lock for proper use.
1. Insert the locking device into
the Kensington slot on the
PC IN
PC
DVI IN
AUDIO
HDMI/DVI IN
AUDIO
Cable
LCD TV (Figure 1) and turn it
in the locking direction
(Figure 2).
Figure 2
EX-LINK
AUDIO
VIDEO S-VIDEO
AV IN
2. Connect the Kensington lock
Figure 1
cable.
ꢀ. Fix the Kensington lock to a
desk or a heavy stationary
object.
The place of the Kensington Lock may be
different depending on its model.
<Optional>
Troubleshooting: Before Contacting Service Personnel
No sound or picture
Check that the mains lead has been connected to a wall socket.
Check that you have pressed the button on the front of the set.
Check the picture contrast and brightness settings.
Check the volume.
Normal picture but no
sound
Check the volume.
Check whether the MuTe
Check if "Internal Mute" is off
button has been pressed on the remote control.
Screen is black and power
indicator light blinks steadily
On your computer check; Power, Signal Cable.
The TV is using its power management system.
Move the computer’s mouse or press any key on the keyboard.
No picture or black and
white picture
Adjust the colour settings.
Check that the broadcast system selected is correct.
Sound and picture
interference
Try to identify the electrical appliance that is affecting the set and move it
further away.
Plug your set into a different mains socket.
Blurred or snowy picture,
distorted sound
Check the direction, location and connections of your aerial.
This interference is often due to the use of an indoor aerial.
Remote control malfunctions
Replace the remote control batteries.
Clean the upper edge of the remote control (transmission window).
Check the battery terminals.
"Check signal cable."
message is displayed.
Check that the signal cable is firmly connected to the PC or video sources.
Check that the PC or video sources are turned on.
On PC mode, "Not Sup-
ported Mode." message is
displayed.
Check the maximum resolution and the frequency of the video adaptor.
Compare these values with the data in the Display Modes.
The TFT LCD panel uses a panel consisting of sub pixels (3 888 000) which require sophisticated
technology to produce. However, there may be few bright or dark pixels on the screen. These pixels will
have no impact on the performance of the product.
english - ꢂꢂ
Download from Www.Somanuals.com. All Manuals Search And Download.
Technical and Environmental Specifications
Model Name
le1ꢆRꢅ
Screen Size (Diagonal)
PC Resolution
19 inch
1440 x 900 @ 60 Hz
Sound
Output
3W x 2
Dimension (WxDxh)
Body
480 x 58 x 361 mm
With stand
480 X 180 X 393 mm
Weight
With stand
5 kg
environmental Considerations
Operating Temperature
Operating Humidity
Storage Temperature
Storage Humidity
10 °C to 40 °C (50 °F to 104 °F)
10 % to 80 %, non-condensing
-20 °C to 45 °C (-4 °F to 113 °F)
5 % to 95 %, non-condensing
Design and specifications are subject to change without prior notice.
This device is a Class B digital apparatus.
For the power supply and Power Consumption, refer to the label attached to the product.
english - ꢂꢃ
Download from Www.Somanuals.com. All Manuals Search And Download.
Warning! Important Safety Instructions
Please read the appropriate section that corresponds to the marking on your Samsung product before
attempting to install the product.
This symbol indicates that high voltage is
present inside. It is dangerous to make any
CAuTION
kind of contact with any internal part of this
product.
RISK OF eleCTRIC ShOCK DO NOT OPeN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
This symbol alerts you that important literature
concerning operation and maintenance has
been included with this product.
DO NOT REMOVE COVER (OR BACK). THERE ARE
NO USER SERVICEABLE PARTS INSIDE. REFER ALL
SERVICING TO QUALIFIED PERSONNEL.
• The slots and openings in the cabinet and in the back or bottom are provided for necessary ventilation.
To ensure reliable operation of this apparatus, and to protect it from overheating, these slots and openings must never
be blocked or covered.
-
-
-
Do not cover the slots and openings with a cloth or other materials.
Do not block the slots and openings by placing this apparatus on a bed, sofa, rug or other similar surface.
Do not place this apparatus in a confined space, such as a bookcase, or built-in cabinet, unless proper ventilation is
provided.
-
Give your product 10 cm (4 inch) clearance from the wall.
• Do not place this apparatus near or over a radiator or heat resistor, or where it is exposed to direct sunlight.
• Do not place heat generating items such as candles, ashtrays, incense, flammable gas or explosive materials near the
product.
• Do not place a water containing vessel on this apparatus, as this can result in a risk of fire or electric shock.
• Do not expose this apparatus to rain or place it near water(near a bathtub, washbowl, kitchen sink, or laundry tub,
in a wet basement, or near a swimming pool etc.). If this apparatus accidentally gets wet, unplug it and contact an
authorized dealer immediately. Make sure to pull out the power cord from the outlet before cleaning.
• This apparatus use batteries. In your community there might be regulations that require you to dispose of these
batteries properly under environmental considerations. Please contact your local authorities for disposal or recycling
information.
• Do not overload wall outlets, extension cords or adaptors beyond their capacity, since this can result in fire or electric
shock.
• Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or
against them,
paying particular attention to cords at plug end, adaptors and the point where they exit from the appliance.
• To protect this apparatus from a lightning storm, or when it is left unattended and unused for long periods of time,
unplug it from the wall outlet and disconnect the antenna or cable system.
This will prevent damage to the set due to lightning and power line surges.
• Before connecting the AC power cord to the DC adaptor outlet, make sure the voltage designation of the DC adaptor
corresponds to the local electrical supply.
• Never insert anything metallic into the open parts of this apparatus. Doing so many create a danger of electric shock.
• To avoid electric shock, never touch the inside of this apparatus. Only a qualified technician should open this
apparatus.
• Make sure to plug the power cord in until it is firmly inserted. When removing the power cord, make sure to hold the
power plug when pulling the plug from the outlet. Do not touch the power cord with wet hands.
• If this apparatus does not operate normally - in particular, if there are any unusual sounds or smells coming from it
- unplug it immediately and contact an authorized dealer or service center.
• Be sure to pull the power plug out of the outlet if the TV is to remain unused or if you are to leave the house for an
extended period of time (especially when children, elderly or disabled people will be left alone in the house).
- Accumulated dust can cause an electric shock, an electric leakage or a fire by causing the power cord to generate
sparks and heat or the insulation to deteriorate.
• Be sure to contact an authorized service center, when installing your set in a location with heavy dust, high or low
temperatures,high humidity, chemical substances and where it operates for 24 hours such as the airport, the train
station etc. Failure to do so may cause serious damage to your set.
• Use only a properly grounded plug and receptacle.
-
An improper ground may cause electric shock or equipment damage. (Class l Equipment only.)
• To disconnect the apparatus from the mains, the plug must be pulled out from the mains socket, therefore the mains
plug shall be readily operable.
• Do not allow children to hang onto the product.
• Store the accessories (battery, etc.) in a location safely out of the reach of children.
• Do not install the product in an unstable location such as a shaky self, a slanted floor or a location exposed to vibration.
• Do not drop or impart any shock to the product. If the product is damaged, disconnect the power cord and contact a
service center.
WARNING - TO PREVENT THE SPREAD OF FIRE,
•
KEEP CANDLES OR OTHER OPEN FLAMES
AWAY FROM THIS PRODUCT AT ALL TIMES.
Download from Www.Somanuals.com. All Manuals Search And Download.
Wiring the Mains Power Supply Plug (uK Only)
IMPORTANT NOTICe
The mains lead on this equipment is supplied with a moulded plug incorporating a fuse. The value of the fuse is
indicated on the pin face of the plug and, if it requires replacing, a fuse approved to BSI1362 of the same rating
must be used.
Never use the plug with the fuse cover omitted if the cover is detachable. If a replacement fuse cover is required,
it must be of the same colour as the pin face of the plug. Replacement covers are available from your dealer.
If the fitted plug is not suitable for the power points in your house or the cable is not long enough to reach
a power point, you should obtain a suitabl y approved extension lead or consult your dealer for assistance.
However, if there is no alternative but to cut off the plug, remove the fuse and then safely dispose of the plug.
Do NOT connect the plug to a mains socket as there is a risk of shock hazard from the bared flexible cord.
IMPORTANT
The wires in the mains lead are coloured in accordance with the following code:
BLUE - NEUTRAL BROWN - LIVE
As these colours may not correspond to the coloured markings identifying the terminals in your plug, proceed as
follows :
The wire coloured BLUE must be connected to the terminal marked with the letter N or coloured BLUE or
BLACK. The wire coloured BROWN must be connected to the terminal marked with the letter L or coloured
BROWN or RED.
WARNING:
DO NOT CONNECT EITHER WIRE TO THE EARTH TERMINAL, WHICH IS MARKED WITH THE
LETTER E OR BY THE EARTH SYMBOL
, OR COLOURED GREEN OR GREEN AND YELLOW.
Warranty Card
uNITeD KINGDOM
This Samsung product is warranted for a period of twelve (12) months from the original date of purchase, against
defective materials and workmanship. In the event that warranty service is required, you should return the
product to the retailer from whom it was purchased. However, Samsung Authorised Dealers and Authorised
Service Centres in other EC Countries will comply with the warranty on the terms issued to purchasers in the
country concerned. In case of difficulty, details of our Authorised Service Centres are available from:
Samsung electronics u.K. ltd.
Customer Care Centre
PO Box 1ꢄ2ꢁꢀ
edinburgh, eh11 ꢁYB
united Kingdom
Tel: 0ꢅꢄ0 SAMSuNG (ꢄ2ꢃꢄꢅꢃꢁ)(uK & Northern Ireland)
Tel: 0ꢅ1ꢅ ꢄ1ꢄ 100 (Republic of Ireland Only)
Fax: +ꢁꢁ (0)ꢅꢄ0 ꢄ22112ꢄ
WARRANTY CONDITIONS
1. The warranty is only valid if, when warranty service is required, the warranty card is fully and properly
completed and is presented with the original invoice or sales slip or confirmation, and the serial number on
the product has not been defaced.
2. Samsung’s obligations are limited to the repair or, at its discretion, replacement of the product or the
defective part.
3. Warranty repairs must be carried out by Authorised Samsung Dealers or Authorised Service Centres.
No re-imbursement will be made for repairs carried out by non Samsung Dealers and, any such repair work
and damage to the products caused by such repair work will not be covered by this warranty.
4. This product is not considered to be defective in materials nor workmanship by reason that it requires
adaptation in order to conform to national or local technical or safety standards in force in any Country other
than the one for which the product was originally designed and manufactured.
Download from Www.Somanuals.com. All Manuals Search And Download.
Correct Disposal of This Product (Waste Electrical & Electronic Equipment)
(Applicable in the European Union and other European countries with separate collection systems)
This marking shown on the product or its literature, indicates that it should not be disposed with other household wastes at
the end of its working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal,
please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material
resources. Household users should contact either the retailer where they purchased this product, or their local
government office, for details of where and how they can take this item for environmentally safe recycling. Business users
should contact their supplier and check the terms and conditions of the purchase contract. This product should not be
mixed with other commercial wastes for disposal.
Download from Www.Somanuals.com. All Manuals Search And Download.
|