Samsung Digital Camera D53 User Guide

Download from Www.Somanuals.com. All Manuals Search And Download.

Danger

DANGER indicates an imminently hazardous situation which, if not avoided, will

result in death or serious injury.

ƈ Do not attempt to modify this camera in any way. This may result in fire, injury,

electric shock or severe damage to you or your camera. Internal inspection,

maintenance and repairs should be carried out by your dealer or Samsung

Camera Service centre.

ƈ Do not leave this camera in places subject to extremely high temperatures, such

as a sealed vehicle, direct sunlight or other places of extreme variances in

temperature. Exposure to extreme temperatures may adversely affect the

camera’s internal components and could cause a fire.

ƈ When in use, do not cover the camera or Charger. This may cause heat to build

up and distort the camera body or cause a fire. Always use the camera and its

accessories in a well-ventilated area.

ƈ Please do not use this product in close proximity to flammable or explosive

gases, as this could increase the risk of explosion.

ƈ Should any form of liquid or a foreign object enter the camera, do not use it.

Switch off the camera, and then disconnect the power source. You must contact

your dealer or Samsung Camera Service centre. Do not continue to use the

camera as this may cause a fire or electric shock.

ƈ Do not insert or drop metallic or inflammable foreign objects into the camera

through access points e.g. the memory card slot and battery chamber. This may

cause a fire or electric shock.

Caution

CAUTION indicates a potentially hazardous situation, which, if not avoided, may

result in a minor or moderate injury.

ƈ Leaking, overheating, or burst battery could result in fire or injury.

ҮUse battery with the correct specification for the camera.

ҮDo not short circuit, heat or dispose of battery in fire.

ƈ Do not operate this camera with wet hands. This could pose a risk of electric shock.

ҮDo not insert the battery with the polarities reversed.

ƈ Remove the battery when not planning to use the camera for a long period of

time. Battery may leak corrosive electrolyte and permanently damage the

camera’s components.

ƈ Do not fire the flash while it is in contact with hands or objects. Do not touch the

flash after using it continuously. It may cause burns.

Warning

WARNING indicates a potentially hazardous situation, which, if not avoided, could

result in death or serious injury.

ƈ Do not use the flash in close proximity to people or animals. Positioning the flash

too close to your subject’s eyes may cause eyesight damage.

ƈ For safety reasons keep this product and accessories out of reach of children or

animals to prevent accidents e.g.:

ҮSwallowing battery or small camera accessories. If an accident should occur,

please consult a doctor immediately.

ҮThere is the possibility of injury from the camera’s moving parts.

ƈ Battery and camera may become hot during prolonged use and it may result in

camera malfunction. Should this be the case, allow the camera to sit idle for a

few minutes to allow it time to cool.

ƈ Do not move the camera while it is switched on, if you are using the AC Charger.

After use, always switch off the camera before unplugging the cable from the

wall socket. Then make sure that any connector cords or cables to other devices

are disconnected before moving the camera. Failure to do so may damage the

cords or cables and cause a fire or electric shock.

ƈ Take care not to touch the lens or lens cover to avoid taking an unclear image

and possibly causing camera malfunction.

ƈ Avoid obstructing the lens or the flash when you capture an image.

ŝ2Ş

Download from Www.Somanuals.com. All Manuals Search And Download.

Contents

ƃUsing the camera buttons to set

the camera

ƈPOWER button

ƈShutter button

ƈZOOM W / T button

ƈM(Mode) button

ƈVoice recording / Voice memo /

UP button

ƈMacro / Down button

ƈFocus lock

ƈFlash / Left button

ƈSelf-timer / Right button

ƈMENU / OK button

ƈE (Effect) button

ƈPlaying back a recorded voice

ƃLCD monitor Indicator

ƃUsing the camera buttons to set

the camera

ƈLanguage

READY

ƈFormatting a memory

ƈSetting up the Date / Time /

Date type

ƈImprinting the recording date

ƈSound

ƃSystem chart

ƃIdentification of features

ƈFront & Top

ƈBack & Bottom

ƈBottom / 5-function button

ƈSelf-timer lamp

ƈCamera Status Lamp

ƈMode icon

ƃConnecting to a Power Source

ƈUsing the batteries

ƃInserting the memory card

ƃInstructions on how to use the

memory card

ƈThumbnail / Enlargement button 37

ƈVoice memo / Up button

ƈPlay & Pause / Down button

ƈE (Effect) button

ƈDelete button

ƈConnecting an External Device (USB) 56

ƈAuto Focus lamp

ƈLCD brightness

ƈSelecting Video out type

ƈQuick view

ƈPrinter button

ƈLeft / Right / Menu / OK button

ƃSetting up the play back function

using the LCD monitor

ƈStarting the slide show

ƈProtecting images

ƈDeleting images

ƈResize

ƈRotating an image

ƈDPOF

ƈDPOF : Standard

ƈDPOF : Index

ƈInitialisation

ƈSelecting a battery type

ƃSetting up the Mycam menu

ƈStart up image

ƈStart up sound

ƈShutter sound

ƃImportant notes

ƃWarning indicator

ƈSpecial Effect : Colour

ƃWhen Using the Camera for the

First Time

Special Effect : Preset focus frames 25

Special Effect : Composite shooting 26

ƈSpecial Effect : Photo Frame

ƈ+ / - button

ƃUsing the LCD monitor to set the

camera settings

ƈHow to use the menu

ƈSize

ƈQuality / Frame rate

ƈMetering

RECORDING

ƃBefore contacting a service centre 61

ƃLCD monitor indicator

ƃSpecifications

ƃChanging the recording mode

ƃStarting the recording mode

ƈHow to use the AUTO mode

ƈDPOF : Print size

ƈCopy To Card

ƈOn Screen Display information 49

SOFTWARE

How to use the PROGRAM mode 14

ƈPictBridge

ƃSoftware Notes

ƃSystem Requirements

ƃAbout the software

How to use the MANUAL mode 15

How to use the MOVIE CLIP mode 15

Recording the movie clip without voice 15

Pausing while recording a movie clip 15

ƈContinuous shot

ƈSharpness

ƈPictBridge : Picture Selection

ƈPictBridge : Print Setting

ƈPictBridge : Printing

ƈPictBridge : Reset

ƈOSD (On Screen Display) information 34

ƃSetting up the application software 66

ƃStarting PC mode

ƃRemoving the removable disk

ƈNight / Portrait / Children mode 16

PLAY

ƈHow to use the SCENE mode

ƈHow to use the VOICE

RECORDING mode

ƃThings to Watch Out for When

Taking Pictures

ƃSetting up the USB Driver for MAC 71

SETUP

ƃStarting play mode

ƃUsing the USB Driver for MAC

ƃDigimax Master

ƃFAQ

ƈPlaying back a still image

ƈPlaying back a movie clip

ƈHow to capture the movie clip

ƃSetup menu

ƈFile name

ƈAuto power off

ŝ3Ş

Download from Www.Somanuals.com. All Manuals Search And Download.

System chart

Please check that you have the correct contents before using this product. The

contents can vary depending on the sales region. To buy the optional equipment,

contact your nearest Samsung dealer or Samsung service centre.

System Requirements

For Windows

ҮWindows 98 / 98SE / 2000 / ME / XP

ҮPC with processor better than

Pentium II 450MHz (Pentium 700MHz

or better is recommended)

Ү200MB of available hard-disk space

ҮMinimum 64MB RAM

< Included items >

Ү1024x768 pixels, 16-bit colour display

compatible monitor (24-bit colour

display recommended)

User manual,

Product warranty

Software CD

(see p.65)

Computer

(see p.68)

PictBridge compatible

printer (see p.49)

Camera case

Camera strap

ҮCD-ROM drive

ҮDirectX 9.0 or later

ҮUSB port

For Macintosh

ҮPower Mac G3 or later

Ү Mac OS 9.2 ~ 10.3

ҮMinimum 64MB RAM

Ү110MB of available hard-disk space

ҮUSB port

DPOF compatible

printer (see p.46)

SD memory card / MMC

(see p.9)

USB cable

AV cable

ҮCD-ROM drive

Rechargeable battery

AA Alkaline

Batteries

CAUTION

(SNB-2512)

When you connect the camera to a

computer, printer or external monitor,

you must to use the USB / AV cable

(Optional) supplied with the camera,

or the external devices can't

External monitor

(see p.57)

recognise the camera.

AC cord

Charger(SBC-N1)

ŝ4Ş

Download from Www.Somanuals.com. All Manuals Search And Download.

Identification of features

Front & Top

M(Mode) button

Shutter button

Power button

Speaker

Strap eyelet

Flash

Self-timer lamp /

Auto focus lamp

Lens / Lens cover

Microphone

ŝ5Ş

Download from Www.Somanuals.com. All Manuals Search And Download.

Identification of features

Back & Bottom

Camera status lamp

Zoom W button (Thumbnail)

Zoom T button (Digital zoom)

E (Effects) button

+/- button, Delete button

LCD monitor

Play mode / Printer button

5 function button

Tripod

USB / AV connection terminal

ŝ6Ş

Download from Www.Somanuals.com. All Manuals Search And Download.

Identification of features

Bottom / 5-function button

Voice memo /

Voice Recording / Up button

Battery chamber cover

Menu / OK button

Memory card slot

Battery chamber

Flash /

Left button

Self-timer /

Right button

Macro / Down button

Play & Pause button

ŝ7Ş

Download from Www.Somanuals.com. All Manuals Search And Download.

Identification of features

ƈSelf-timer lamp

ƈ Mode icon Refer to page 14~17 for more information about the camera mode

setting.

Icon

Status

Description

For the first 8 seconds, the lamp blinks at 1 second

intervals.

MODE AUTO PROGRAM MANUAL NIGHT PORTRAIT CHILDREN MOVIE PLAY

Icon

Blinking

For the final 2 seconds, the lamp blinks quickly at 0.25-

second intervals.

SCENE

MODE

For the 2 seconds, the lamp blinks quickly at 0.25-second

intervals before taking a picture

LANDSCAPE CLOSE UP SUNSET DAWN BACKLIGHT FIREWORKS BEACH & SNOW

Blinking

Icon

A picture will be taken after about 10 seconds and 2

seconds later a second picture will be taken.

ƈCamera Status Lamp

Connecting to a Power Source

Status

Description

Using the batteries

The lamp turns on and off when the camera is ready to

take a picture

Power on

ƃ We recommend using batteries for a digital camera (Within a year from the date

of manufacture). The batteries are listed below.

- Non rechargeable batteries

The lamp blinks while saving the image data and turns

off when the camera is ready to take a picture

After taking a picture

: 2 X AA Alkaline (High Capacity)

While voice memo recording The lamp blinks

While voice recording The lamp blinks

- Rechargeable batteries (Optional) : SNB-2512 (Ni-MH)

Model

Type

SNB-2512

Transmitting Data with a PC The lamp turns on (LCD monitor turns off)

When the USB cable is

The lamp is off

Ni-MH

2,500mAh

1.2V X 2

inserted to a printer

Capacity

Voltage

When the printer is printing The lamp blinks

The lamp turns on (The camera focus on the subject)

When the AF activates

Approximately 240 Minutes

(Use for SBC-N1)

The lamp blinks (The camera doesn't focus on the subject)

Charging time

ſ Included battery may vary depending on sales region.

ŝ8Ş

Download from Www.Somanuals.com. All Manuals Search And Download.

Connecting to a Power Source

ƈ There are 4 indicators for battery condition that are displayed on the LCD

monitor.

INFORMATION

Important information about battery usage

ƃ When the camera is not used, turn off the camera power.

ƃ Please remove the battery if the camera will not be used for long periods.

Battery can lose power over time and are prone to leaking if kept inside the

camera.

ƃ Low temperatures (below 0˚C) can affect the performance of the battery

and you may experience reduced battery life.

Battery

indicator

Low battery capacity Low battery capacity Low battery capacity

(Prepare to recharge (Prepare to recharge (Prepare to recharge

or use spare battery) or use spare battery) or use spare battery)

Battery

status

The battery is

fully charged

ƃ Batteries will usually recover at normal temperatures.

ƃ During extended use of the camera, the camera body may become warm.

This is perfectly normal.

ƈ Insert the battery as shown

Inserting the memory card

ƈ Insert the memory card as shown.

- Turn off the camera’s power before

inserting the memory card.

- Have the front of the memory card facing

toward the front of the camera (lens) and

the card pins toward the back of the camera

(LCD monitor).

- If the camera does not turn on after you

have inserted battery, please check

whether the battery is inserted with the

correct polarity (+ / -).

- When the battery chamber cover is opened,

do not press the battery chamber cover by

force. This may cause damage to the

battery chamber cover.

- Do not insert the memory card the wrong

way round. Doing so may damage the

memory card slot.

ŝ9Ş

Download from Www.Somanuals.com. All Manuals Search And Download.

Instructions on how to use the memory card

ƃ Be sure to format the memory card (see p.55) if you are using a newly

purchased memory for the first time, if it contains data that the camera cannot

recognise, or if it contains images captured with a different camera.

ƃ If the memory card is subjected to any of the following, the recorded data may

become corrupted :

- When the memory card is used incorrectly.

- If the power is switched off or the memory card is removed while recording,

deleting (formatting) or reading.

ƃ Turn off the camera power whenever the memory card is being inserted or

removed.

ƃ Samsung cannot be held responsible for lost data.

ƃ Repeated use of the memory card will eventually reduce the memory card’s

performance. Should this be the case, you will need to purchase a new memory

card. Wear and tear on the memory card is not covered by the Samsung

warranty.

ƃ It is advisable to copy important data onto other media as back-up e.g. floppy

disks, hard disks, CD etc.

ƃ If there is insufficient memory available

ƃ The memory card is an electronic precision device.

Do not bend, drop or subject the memory card to any heavy impact.

: A [Memory Full!] message will appear and the camera will not operate. To

optimise the amount of memory in the camera, replace the memory card or

delete unnecessary images stored on the memory card.

ƃ Do not store the memory card in an environment with strong electronic or

magnetic fields, e.g. near loud speakers or TV receivers.

ƃ Please do not use or store in an environment where there are extremes in

temperature.

ƃ Do not allow the memory card to become dirty or to come into contact with any

liquid. Should this happen, clean the memory card with a soft cloth.

ƃ Please keep the memory card in its case when not in use.

ƃ During and after periods of extended use, you may notice that the memory card

is warm. This is perfectly normal.

ƃ Do not use a memory card that is used in another digital camera.

To use the memory card in this camera, format the memory card using this

camera.

ƃ Do not use a memory card formatted by another digital camera or memory card

reader.

ŝ10Ş

Download from Www.Somanuals.com. All Manuals Search And Download.

Instructions on how to use the memory card

ƈ When using a 20MB internal memory, the specified shooting capacity will be as

follows. These figures are approximate as image capacities can be affected by

variables such as subject matter and memory card type.

INFORMATION

ƃ Don't remove the memory card when the camera status lamp is blinking as

this may cause damage to data in the memory card.

Recorded image size Super Fine

Fine

127

Normal

30FPS

15FPS

115

158

ƈ The camera can use SD Memory Cards and MMC (Multi Media Cards).

Please consult the enclosed manual for using the MMC Cards.

Still

image

The SD memory card has a write protect

Card pins

switch that prevents image files from

being deleted or formatted. By sliding the

switch to the bottom of the SD memory

card, the data will be protected. By sliding

the switch to the top of the SD memory

card, the data protection will be

VGA

640

320

160

Write protect

switch

About 17" About 31"

About 1' About 1' 49"

About 2' 55" About 4' 44"

Movie

clip

Label

cancelled.

Slide the switch to the top of the SD

memory card before taking a picture.

ſ The recording times can be changed by the zoom operation.

The zoom button doesn’t use during the movie recording.

[ SD (Secure Digital) memory card ]

ŝ11Ş

Download from Www.Somanuals.com. All Manuals Search And Download.

When Using the Camera for the First Time

ƈCharge the rechargeable battery fully before using the camera for the first time.

INFORMATION

ƃ You can select one of 22 languages. These are listed below :

- English, Korean, French, German, Spanish, Italian, S.Chinese, T.Chinese,

Japanese, Russian, Portuguese, Dutch, Danish, Swedish, Finnish, Thai,

BAHASA(MALAY / INDONESIAN), Arabic, Czech, Polish, Hungarian and

Turkish.

ƈWhen the camera is turned on for the first time, a menu will be displayed to set

date / time, language and battery type in the LCD monitor. This menu will not be

displayed after setting up. Set up the date / time, language and battery type

before using this camera.

ƃ Even if the camera is restarted, the language setting will be maintained.

ƃ Setting up the date, time and date type

1. Select the [Date&Time] menu by pressing

the UP / DOWN button and press

SETUP

Date&Time

ꢁ

06/01/01

ꢂ

13:00

Language

the RIGHT button.

ƃ Setting up the battery type

Battery Type

2. Select the desired sub menu by pressing

the UP / DOWN / LEFT / RIGHT button

and press the OK button.

yy/mm/dd

1. Select the [Battery Type] menu by pressing the

UP / DOWN button and press the RIGHT button.

Back:ꢀ

Set:OK

SETUP

Date&Time

2. Select the desired sub menu by pressing the

UP / DOWN button and press the OK button.

Language

RIGHT button : Selects YEAR / MONTH / DAY / HOUR / MINUTE / DATE

TYPE

Alkaline

Ni-MH

Battery Type

Back:ꢀ

Set:OK

LEFT button

: Moves the cursor to the [Date&Time] main menu if the cursor

is at the first item of the date and time setup. In all other

instances, the cursor will be shifted to the left of its current

position.

UP/ DOWN button : Changes the value of each item.

ƃ Setting up the language

1. Select the [Language] menu by pressing the

UP / DOWN button and press the RIGHT button.

2. Select the desired sub menu by pressing the

UP / DOWN button and press the OK button.

When the settings are complete, press the MENU

button twice to exit the menu screen.

SETUP

ENGLISH

Date&Time

Language

FRANÇAIS

DEUTSCH

ESPAÑOL

Battery Type

Back:ꢀ

Set:OK

ŝ12Ş

Download from Www.Somanuals.com. All Manuals Search And Download.

LCD monitor indicator

ƈ The LCD monitor displays information about the shooting functions and

selections.

No.

Description

Continuous shot

Flash

Icons

Page

p.33

p.21~23

p.23

p.20~21

p.33

Self-timer

Macro

Metering

Card inserted indicator

Auto focus frame

Camera shake warning

Date / Time

p.17

p.55

p.30

p.29~30

p.29

p.28

p.34

p.32

p.11

2006/01/01 01:00 PM

Exposure compensation

White Balance

ISO

RGB

Sharpness

Image quality / Frame rate

Image size

[Image & Full Status]

Number of available shots remaining

No.

Description

p.11

p.20

p.14~17

Recording mode

Voice memo

Battery

p.9

Optical / Digital Zoom bar /

Digital Zoom rate

p.18~19

Aperture Value / Shutter Speed

F2.8, 1/30

p.15

ŝ13Ş

Download from Www.Somanuals.com. All Manuals Search And Download.

Changing the recording mode

Starting the recording mode

ƈ You can select the desired working mode using the M(Mode) button located on

the top of the camera.

ƈ How to use the AUTO mode (

)

Please select this mode for quick and easy picture taking with minimal user

interaction.

1. Insert the batteries (p.9). Insert the batteries taking note of the polarity(+/-).

2. Insert the memory card (p.9).

As this camera has a 20MB internal memory, you do not need to insert the

memory card. If the memory card is not inserted, an image will be stored in

the internal memory. If the memory card is inserted, an image will be stored

on the memory card.

1. Point the camera towards the subject and

compose the image by using the LCD monitor.

2. Press the shutter button to capture an image.

3. Close the battery chamber cover.

4. Press the power button to turn on the camera.

(If the date / time that is displayed on the LCD

monitor is incorrect, reset the date / time

before taking a picture.)

5. The previously used recording mode will

appear in the display.

INFORMATION

ƃ If the auto focus frame turns to red when you press the shutter button down

half way, It means that the camera cannot focus on the subject. Should this

be the case, the camera is unable to capture an image clearly.

6. Press the M(Mode)button located on the top

of the camera and the mode selection menu

will display.

ƈ How to use the PROGRAM mode (

)

7. To select the Auto, Program, Manual, Movie

clip, Night, Portrait, Children or Scene modes,

press the Left / Right button.

8. Press the M(Mode) button, OK button or

Shutter button and a recording mode selected

Selecting the automatic mode will configure the

camera with optimal settings. You can still manually

configure all functions except the aperture value and

shutter speed.

Auto

on the [mode selection menu] will be selected.

1. Press the menu button to configure advanced

functions such as image size (p.32), quality (p.32),

metering (p.33), continuous shooting (p.33) and

special effects (p.24).

ŝ14Ş

Download from Www.Somanuals.com. All Manuals Search And Download.

Starting the recording mode

ƈ How to use the MANUAL mode (

)

ƈ Recording the movie clip without voice

You can manually configure all functions with the aperture value and shutter

speed.

You can record the movie clip without voice.

1. Press the Up button and the

on the LCD monitor.

icon will display

1. Press the + / - button and menu for the shutter

speed and aperture value will display.

Up / Down button : changes aperture value

Left / Right button : changes shutter speed.

2. Press the + / - button twice and take an image.

2. Press the shutter button and movie clip is

recorded for as long as the available recording

time without voice.

3. To stop the recording, press the shutter button

again.

* Smaller Aperture values make the object sharp but blur the background. Larger

Aperture values make both the object and background sharp.

* High Shutter speeds can capture a moving object in a still image as if the object is

not moving. Low Shutter speeds can capture a moving object with an ‘active’

effect.

ƈ Pausing while recording a movie clip (Successive Recording)

This camera allows you to temporarily stop during unwanted scenes, while

recording a movie clip. Using this function, you can record your favourite scenes

into a movie clip without having to create multiple movie clips.

ƈ How to use the MOVIE CLIP mode (

)

A movie clip can be recorded for as long as the available recording time of the

memory capacity allows.

ƃ Using Successive Recording

1. Press the shutter button and movie clips are

recorded for as long as the available recording time.

Movie clips will still be recorded if the shutter button

is released.

2. Press the Pause button (

Press the Pause button (

the recording.

1. Point the camera towards the subject and

compose the image by using the LCD monitor.

Press the shutter button and movie clips are

recorded for as long as the available recording

time. Movie clips will still be recorded if the shutter

button is released.

Stop:Shutter

REC:ꢀ/

) to pause recording.

) again to resume

[Successive recording of a movie clip]

* If you wish to stop recording, press the shutter

button again.

3. If you wish to stop recording, press the shutter

button again.

* Image size and type are listed below.

- Image size : 640X480, 320X240, 160X120 (Selectable)

- File type

: *.avi (MJPEG)

ŝ15Ş

Download from Www.Somanuals.com. All Manuals Search And Download.

Starting the recording mode

ƈ Night / Portrait / Children mode

- Night mode : Use this for still images at night or in other dark conditions

- Portrait mode : To take a picture of a person

ƈ How to use the SCENE mode (

)

Use the menu to easily configure optimal settings for a variety of shooting

situations. These include LANDSCAPE, CLOSE UP, SUNSET, DAWN,

BACKLIGHT, FIREWORKS and BEACH & SNOW scenes.

- Children mode : To take a still picture of moving children

1. Press the menu button and select a desired

scene menu.

[Night mode]

[Portrait mode]

[Children mode]

ſThe scene modes are listed below.

[Landscape]

[Close up]

(

)

: To take pictures of distant scenery.

: Close-up shooting for small objects such as

plants and insects.

[Sunset]

[Dawn]

[Backlight]

[FIirework]

[Beach&Snow]

(

)

: For taking pictures of sunsets.

: Daybreak scenes..

: Portrait without shadows caused by backlight.

: Firework scenes.

: For ocean, lake, beach and snowscape scenes.

ŝ16Ş

Download from Www.Somanuals.com. All Manuals Search And Download.

Starting the recording mode

Things to Watch Out for When Taking Pictures

ƈ Pressing the shutter button down half way.

ƈ How to use the VOICE RECORDING mode (

)

Lightly press the shutter button to confirm focus and flash battery charge.

Press the shutter button all way down to take the picture.

1. In any mode with the exception of Movie clip mode,

select the VOICE RECORDING mode by pressing

the Voice recording button twice.

2. Press the shutter button to record a voice.

- Press the shutter button once and voice is

recorded for as long as the available recording

time (Max : 1 hour) allows. The recording time

will be displayed on the LCD monitor. Voice will

still be recorded if the shutter button is released.

- If you wish to stop recording, press the shutter

button again.

[ Lightly press the shutter button ]

[ Press the shutter button ]

ƈ The available recording time may vary depending on shooting conditions and

camera settings.

ƈ When the Flash Off or Slow synchro mode is selected in a low lighting condition,

the camera shake warning indicator (

this case, use a tripod, support the camera on a solid surface or change to flash

shot mode.

REC:Shutter

Exit

- File type : *.wav

* A distance of 40cm between you and the

camera (microphone) is the best distance to record sound.

) may appear on the LCD monitor. In

ƈ Shooting against the light :

Please do not take pictures to the sunlight direction. Taking a picture against the

sun may make the picture dark. To take a picture against the sun, please use the

[Backlight] in the scene shooting mode (see page 16), fill-in flash (see page 22),

spot metering (see page 33), or exposure compensation (see page 30).

ƈ Avoid obstructing the lens or the flash when you capture an image.

ƈ Compose the image by using the LCD monitor.

ƈ Under certain conditions the auto focus system may not perform as expected.

- When photographing a subject that has little contrast.

- If the subject is highly reflective or shiny.

- If the subject is moving at high speed.

- When there is strong reflected light, or when the background is very bright.

- When the subject matter has only horizontal lines or the subject is very narrow

(such as a stick or flagpole).

- When the surroundings are dark.

ŝ17Ş

Download from Www.Somanuals.com. All Manuals Search And Download.

Using the camera buttons to set the camera

ZOOM W / T button

ƈ The recording mode function can be set up by using the camera buttons.

ƃ If the menu is not displayed, this button works

as the OPTICAL ZOOM or DIGITAL ZOOM

button.

POWER button

ƃ Used for turning the camera’s power on / off.

ƃ If there is no operation during the specified time,

the camera's power will be turned off

automatically to save battery life.

ƃ This camera has a 3X optical zoom and a 5X digital zoom function.

Using both will offer a total zoom ratio of 15X.

Refer to page 54 for more information about the

auto power off function.

ƃ TELE Zoom

Optical zoom TELE

: Pressing the ZOOM T button. This will zoom into the

subject i.e. the subject will appear nearer.

Digital zoom TELE

: When the maximum (3X) optical zoom is selected,

pressing the ZOOM T button activates the digital zoom

software. Releasing ZOOM T button stops the digital

zooming at the required setting. Once the maximum

digital zoom (5X) is achieved, pressing the ZOOM T

button will have no effect.

Shutter button

ƃ Used for taking an image or recording voice in

the RECORDING mode.

ƃ In MOVIE CLIP mode :

Pressing the shutter button down fully starts the

process for recording a movie clip. Press the

shutter button once and the movie clip is

recorded for as long as the available recording

time in the memory allows. If you wish to stop recording, press the shutter button

again.

Pressing

the ZOOM

T button

the ZOOM

T button

ƃ In STILL IMAGE mode

Pressing the shutter button down halfway activates the autofocus and checks

the condition of the flash. Pressing the shutter button down fully takes and stores

the image. If you select voice memo recording, the recording will start after the

camera has finished storing the image data.

[ WIDE zoom ]

[ TELE zoom ]

[ Digital zoom 5.0X ]

ŝ18Ş

Download from Www.Somanuals.com. All Manuals Search And Download.

ZOOM W / T button

ƃ WIDE Zoom

Optical zoom WIDE

INFORMATION

: Pressing the ZOOM W button. This will zoom out from

the subject i.e. the subject will appear further away.

Pressing the ZOOM W button continuously will set the

camera to its minimum zoom setting i.e. the subject

appears at its furthest from the camera.

ƃ Images taken using the digital zoom may take a little longer for the camera

to process. Allow time for this to take place.

ƃ The digital zoom cannot be used in movie clip shots.

ƃ You may notice a decrease in image quality when using the digital zoom.

ƃ To view a clearer digital zoom image, press the shutter button halfway at the

maximum (3X) optical zoom position and press the zoom T button again.

ƃ The digital zoom can't be activated in the Nightscene mode, Children mode

and two scene modes (Close up, Fireworks).

ƃ Take care not to touch the lens to avoid taking an unclear image and

possibly causing camera malfunction. If the image is dim, turn the camera

power off and on again to modify the lens position.

Pressing

the ZOOM

W button

Pressing

the ZOOM

W button

[ TELE zoom ]

[ Optical zoom 2X ]

[ WIDE zoom ]

ƃ Take care not to press the lens as this may cause a camera malfunction.

ƃ When the camera is turned on, take care not to touch the camera's moving

lens parts as this may cause the resulting image to be dim and unclear.

Digital zoom WIDE

Optical zoom

: When the digital zoom is in operation, pressing the

ZOOM W button will reduce the digital zooming in

steps. Releasing ZOOM W button stops digital

zooming. Pressing the ZOOM W button will reduce

the digital zoom and then it will continue to reduce the

optical zoom until the minimum setting is reached.

ƈ M(Mode) button

Digital zoom

ƃ You can select the desired recording mode.

The selectable recording modes are listed below.

- Auto, Program, Manual, Movie Clip, Night,

Portrait, Children, Scene mode.

Pressing

the ZOOM

W button

Pressing

the ZOOM

W button

ſ Refer to page 14 for more information about

the M(Mode) button.

[ Digital zoom 5.0X ]

[ TELE zoom ]

[ WIDE zoom ]

ŝ19Ş

Download from Www.Somanuals.com. All Manuals Search And Download.

Voice recording(

) / Voice memo(

) / UP button

Macro( ) / Down button

ƈ While the menu is showing, press the UP button to move up the submenu.

When the menu is not displayed on the LCD monitor, the UP button operates as

the voice recording or voice memo ( ) button. You can add your voice-over to

a stored still image. Refer to page 17 for more information about the voice

recording.

ƈ While the menu is showing, press the DOWN button to move from the main

menu to a submenu, or to move down the submenu. When the menu is not

showing, you can use the MACRO / DOWN button to take macro pictures. The

distance ranges are shown below. Press the Macro button until the desired

macro mode indicator displays on the LCD monitor.

ƃ Recording a voice memo

1. Press the VOICE MEMO (

) button. If the voice memo indicator is

displayed on the LCD monitor, the setting is completed.

[Auto focus - No icon]

[Macro (

)]

[Auto macro (

)]

Stop:Shutter

(Unit : cm)

)

ƈ Types of focus modes and focus ranges (W: Wide, T: Tele)

Mode

Program (

Auto (

)

[Preparing for Voice Memo]

[Recording Voice Memo]

Focus Type Auto macro

(

)

Normal

Macro (

)

Normal

2. Press the shutter button and take a picture. The picture is stored on the

memory card.

3. Voice memo will be recorded for ten seconds from the moment the picture is

stored. In the middle of the sound recording, pressing the shutter button will

stop the voice memo.

W : 5~Infinity

T : 40~Infinity

W : 80~Infinity

T : 80~Infinity

W : 5~80

T : 40~80

W : 80~Infinity

T : 80~Infinity

Focus range

INFORMATION

ƃ When the macro mode is selected, it is possible that camera shake will

occur. Take care not to shake the camera.

ƃ When you take a picture within 20cm in the Macro mode, select the FLASH

OFF mode.

INFORMATION

ƃ A distance of 40cm between you and the camera (microphone) is the best

distance to record sound.

ŝ20Ş

Download from Www.Somanuals.com. All Manuals Search And Download.

Macro( ) / Down button

Flash ( ) / Left button

ƈ Available focusing method, by recording mode

(O: Selectable , X: Not selectable, ∞: Infinity focus range)

ƈ When the menu is displayed on the LCD monitor,

pressing the LEFT button makes the cursor shift to

the left tab.

Mode

Normal

Macro

Auto macro

ƈ When the menu is not displayed on the LCD

monitor, the LEFT button operates as the FLASH

[Selecting the Auto flash]

(

) button.

SCENE

Mode

ƃ Selecting the flash mode

1. Press the Flash button until the desired flash mode indicator displays on the

LCD monitor.

2. A flash mode indicator will be displayed on the LCD monitor.

Use the correct flash to suit the environment.

Normal

Macro

Auto macro

Focus lock

To focus on a subject not positioned in the centre of the picture, use the focus lock function.

ƃ Flash range

(Unit : m)

Auto macro

WIDE TELE

0.8 ~ 3.0 0.8 ~ 2.5 0.2 ~ 0.8 0.4 ~ 0.8 0.2 ~ 3.0 0.4 ~ 2.5

ƃ Using the Focus Lock

Normal

WIDE TELE

Macro

WIDE TELE

1. Ensure the subject is in the centre of the autofocus frame.

2. Press the SHUTTER button halfway. When the green auto focus frame lights

up, it means the camera is focused on the subject. Be careful not to press the

SHUTTER button all the way down to avoid taking an unwanted picture.

3. With the SHUTTER button still pressed down only halfway, move the camera

to recompose your picture as desired, and then press the SHUTTER button

completely to take the picture. If you release your finger from the SHUTTER

button, the focus lock function will be cancelled.

ISO

AUTO

1. The image to be

captured.

2. Press the SHUTTER

button halfway and

focus on the subject.

3. Recompose the picture

and fully depress the

SHUTTER button.

ŝ21Ş

Download from Www.Somanuals.com. All Manuals Search And Download.

Flash ( ) / Left button

ƃ Flash mode indicator

INFORMATION

ƃ If you press the shutter button after selecting the Auto, Fill-in, Slow sychro

flash, the first flash fires to check the shooting condition (Flash range and

Power ratio of flash).

Menu tab

Flash mode

Description

If the subject or background is dark, the camera

flash will operate automatically.

Auto flash

Do not move until the second flash fires.

ƃ Using the flash frequently will reduce the life of the battery.

ƃ Under normal operating conditions the charging time for the flash is

normally within 6 seconds. If the battery is weak, the charging time will be

longer.

ƃ During the continuous shot, AEB and movie clip mode, the flash function will

not operate.

ƃ Take photographs within the flash range.

ƃ The image quality is not guaranteed if the subject is too close or highly

reflective.

Auto &

Red eye

reduction

If a subject or background is dark, the camera flash

will work automatically and will reduce the red-eye

effect by using the red-eye reduction function.

The flash fires regardless of available light.

The intensity of the flash will be controlled, according

to the prevailing conditions. The brighter the

background or subject is, the less intense the flash

will be.

Fill in flash

ƃ When taking an image in a poorly lit condtion with the flash, there may be a

white speck in the captured image. The speck is caused by the reflecting of

the flash light from the floating matters. It is not camera malfuction.

The flash will operate in conjunction with a slow

shutter speed in order to obtain the correct exposure.

When you take an image in a condition with poor

light, the camera shake warning indicator

Slow synchro

(

) will display on the LCD monitor.

We recommend using a tripod for this function.

The flash does not fire. Select this mode when

capturing images in a place or situation where flash

photography is prohibited. When you capture an

image in a poorly lit condition, the camera shake

Flash off

warning indicator (

monitor.

) will display on the LCD

We recommend using a tripod for this function.

ŝ22Ş

Download from Www.Somanuals.com. All Manuals Search And Download.

Flash ( ) / Left button

Self-timer ( ) / Right button

ƃ Available flash mode, by recording mode

ƃ Selecting the self-timer

1. Select a RECORDING mode with the exception

of VOICE RECORDING mode.

2. Press the SELF-TIMER button until the desired

mode indicator displays on the LCD monitor.

Ү10SEC self-timer (

)

: Pressing the shutter button will allow an

interval of 10 seconds before the image is

taken.

Ү2SEC self-timer (

)

: Pressing the shutter button will allow an

interval of 2 seconds before the image is

taken.

[Selecting the 10 SEC self-timer]

ҮDouble self-timer (

)

Self-timer( ) / Right button

: A picture will be taken after about 10 seconds and 2 seconds later a

second picture will be taken. When using the flash, the 2-second self-timer

may be delayed for longer than 2 seconds depending on the flash charge

time.

ƈ When the menu is displayed on the LCD monitor, pressing the Right button

makes the cursor shift to the right tab.

3. When you press the SHUTTER button, the picture will be taken after the

specified time has elapsed.

ƈ When the menu is not displayed on the LCD monitor, the RIGHT button

operates as the Self-timer(

) button. This function is used when the

photographer would also like to be in the image.

INFORMATION

ƃ If you operate the Self-timer and Play mode button during the self-timer

operation, the self-timer function is cancelled.

ƃ Use a tripod to prevent the camera from shaking.

ƃ In Movie Clip mode, only the 10SEC self-timer will work.

ŝ23Ş

Download from Www.Somanuals.com. All Manuals Search And Download.

MENU / OK button

E (Effect) button

ƈ MENU button

ƈ It is possible to add special effects to your images by using this button.

- When you press the MENU button, a menu related to each camera mode will

be displayed on the LCD monitor. Pressing it again will return the LCD to the

initial display.

ƈ Still image mode : You can select the colour, outfocus, composite and frame

menus.

ƈ Movie clip mode : You can select the colour menu.

- A menu option can be displayed when the following are selected :

MOVIE CLIP and STILL IMAGE mode. There is no menu available when the

VOICE RECORDING mode is selected.

ƈ Available Effects, by recording mode (O : Selectable X : Not selectable)

SIZE

2560X1920

2272X1704

2048X1536

1600X1200

Pressing the MENU button

1024X768

640X480

[Menu off]

[Menu on]

ſ This button will not operate in the Voice recording mode and some scene modes

(Night, Sunset, Dawn, Backlight, Firework).

If a special effect is selected, any previously selected special effects (preset

focus frames; composite shooting; photo frame) are cancelled automatically.

ƈ OK button

- When the menu is displayed on the LCD monitor, this button is used for shifting

the cursor to the sub menu or for confirming data.

ƈ Even if the camera is turned off, the special effect setting will be preserved. To

cancel the special effect, select the (

) sub menu in the Colour menu and

select the ( ) sub menu in the rest special effect menu.

ŝ24Ş

Download from Www.Somanuals.com. All Manuals Search And Download.

Special Effect : Colour

Special Effect : Preset focus frames

ƈ By using the camera’s digital processor, it is possible to add special effects to

your images

1. Press the E button in the still image mode or Movie clip mode.

ƈ You can make the subject stand out from its

surroundings. The subject will be sharp and in focus

while making the rest out of focus.

2. Select the (

) menu tab by pressing the Left / Right button.

1. Press the E button in any recording mode

(except for MOVIE CLIP and AUTO mode).

0QOP4QOP\

2. Select the (

Right button.

) menu tab by pressing the Left /

3. Select a desired sub menu by pressing the Up /

Down button and press the OK button.

Normal

[Still image mode]

[Movie clip mode]

3. Select a desired sub menu by pressing the Up / Down button and press the

OK button.

0QOP4QOP\

[Range 1]

[Range 2]

[Range 3]

[Range 4]

: No effect is added to the image

: Captured images will be stored in black and white.

: Captured images will be stored in a sepia tone

(a gradient of yellowish brown colours).

: Captured images will be stored in a red tone.

: Captured images will be stored in a green tone.

: Captured images will be stored in a blue tone.

: Save the image in negative mode.

4. The preset focus frame will appear.

Press the shutter button to capture an image.

Capture:Shutter

Edit:+/-

4. Press the shutter button to capture an image.

ŝ25Ş

Download from Www.Somanuals.com. All Manuals Search And Download.

Special Effect : Preset focus frames

Special Effect : Composite shooting

ƃ Moving and changing the focus frame

ƈ You can combine 2 ~ 4 different shots in a still image.

1. Press the E button in any recording mode

(except for MOVIE CLIP and AUTO mode).

You can change the focus frame after selecting a Range menu.

1. Point the camera towards the subject and compose the image by using the

LCD monitor.

2. Select the (

) menu by pressing the

2. Press the + / - button.

Left / Right button.

Composite

3. The colour of focus frame turns white. Press the Up / Down / Left / Right

button to move the focus frame position.

3. Select a desired sub menu by pressing the

Up / Down button and press the OK button.

4. To select the focus frame position, press the + / - button again and you can

take a picture.

: cancels the composite shooting

: 2 different shots are combined in a still image.

: 3 different shots are combined in a still image.

: 4 different shots are combined in a still image.

: 2 different panorama shots are combined in a still image.

Pressing the + / - button

4. The number of frames you selected in step 3 is displayed on the LCD monitor.

Press the shutter button to start the composite shooting

ꢂ

Capture:Shutter

Edit:+/-

Capture:Shutter

Move:

ꢁꢀ

ꢃ

[The frame is activated]

Pressing the

Up / Down / Left /

Right button

ſ Selecting 2 composite shooting

Pressing

the shutter

button

Pressing

the shutter

button

Pressing

the OK

button

Capture:Shutter Del:+/-

Save:OK

Del:+/-

[Ready for taking]

[First shot]

[Second shot]

[The final picture]

Pressing the + / - button

5. To save the composite shots, press the OK button after taking the last shot.

ꢂ

Capture:Shutter

Edit:+/-

Capture:Shutter

Move:

ꢁꢀ

ꢃ

[After changing the frame

position]

ŝ26Ş

Download from Www.Somanuals.com. All Manuals Search And Download.

Special Effect : Composite shooting

ƃ Changing a part of composite shot after taking the last shot

1. After taking the last shot , a cursor to select a frame will display. Press the Up /

Down / Left / Right button to select the frame.

2. Press the + / - button and an image will be deleted. Composite frame will be

activated.

3. Press the Shutter button. You can take another images again by using the Up /

Down / Left / Right button and + / - button.

4. To save the image, press the OK button.

INFORMATION

ƃ You can use the flash button, self-timer button, macro button, voice memo

button and the Zoom W / T button during the composite shooting.

ƃ If you press the Play mode button or press the Voice recording button twice

during the composite shots, each camera working mode is executed.

When the Menu or E button is pressed, a confirmation window will display.

The images captured before will be deleted.

ƃ After taking the last composite shooting, press the OK button. And then the

voice memo will start.

Pressing the

Up button

ƃ Changing a part of composite shot before taking the last shot

Before taking the last composite shot, you can change a part of composite shot.

1. During the composite shots, press the + / - button.

2. A previous image will be deleted and new frame will display.

If there is an image taken before, press the + / - button again and a previous

image will be deleted again.

Save:OK

Del:+/-

Save:OK

Del:+/-

[After taking the 4th shot]

[Moving backward to the

2nd shot]

Pressing the

+ / - button

Pressing the

Shutter button.

Pressing the + / - button

[Deleting the 2nd shot]

Capture:Shutter

Del:+/-

Capture:Shutter

Del:+/-

[Moving backward to the

2nd shot]

[Before taking the 3rd shot]

Pressing the OK

button

3. Press the shutter button to capture a new image.

Save:OK

Del:+/-

[After taking the 2nd shot again]

[The final picture]

ŝ27Ş

Download from Www.Somanuals.com. All Manuals Search And Download.

Special Effect : Photo Frame

+ / - button

ƈYou can add 9 types of frame-like borders to a still image you want to capture.

ƈ You can use the + / - button to adjust the values for the RGB, ISO, white balance

and exposure compensation.

1. Press the E button in any recording mode

(except for MOVIE CLIP and AUTO mode).

Main menu

RGB

Sub menu

Available camera mode

2. Select the (

Right button.

) menu by pressing the Left /

R (Red), G (Green), B (Blue)

AUTO, 50, 100, 200, 400

3. Select a desired sub menu by pressing the Up /

Down button and press the OK button.

Photoframe

ISO

AUTO, DAYLIGHT, CLOUDY,

FLUORESCENT H,

FLUORESCENT L, TUNGSTEN,

CUSTOM.

: The photo frame will not be added.

WHITE BALANCE

Exposure compensation

-2.0~0.0~+2.0 (0.5EV steps)

ƈ RGB : Allows the user to adjust the R (Red), G (Green), and B (Blue) values of

the images to be captured.

ƃ Setting RGB Values

1. Press the + / - button, and then use the UP and

DOWN buttons to select the RGB icon (

The RGB menu bar will appear as shown.

2. Use the UP / DOWN / LEFT and RIGHT

buttons to select the desired RGB value.

- Up / Down Button : Navigates between R, G,

and B icons.

- Left / Right Button : Changes value of each icon.

3. When you press the + / - button again, the value you set will be saved and

RGB setup mode will end.

4. The photo frame will appear.

Press the shutter button to capture an image

ſ When special effect (colour) from the icon other than

is selected, it will not

ſ Before taking a picture, you can change the frame by

pressing the + / - button. Change the frame type by

pressing the Up / Down / Left / Right button.

be able to select the RGB.

Capture:Shutter

Frame:+/-

ŝ28Ş

Download from Www.Somanuals.com. All Manuals Search And Download.

+ / - button

ƈ ISO : You can select the ISO sensitivity when taking pictures.

ƈ White balance : The white balance control allows you to adjust the colours to

The speed or specific light-sensitivity of a camera is rated by ISO numbers.

appear more natural looking.

ƃ Selecting a White Balance

ƃ Selecting an ISO Sensitivity

1. Press the + / - button, and then use the UP and

DOWN buttons to select the white balance icon

1. Press the + / - button, and then use the UP and

DOWN buttons to select the ISO icon(

The ISO menu bar will appear as shown.

(

). The white balance menu bar will appear

as shown.

2. Use the LEFT and RIGHT buttons to select the

desired ISO sensitivity value.

- AUTO : The camera's sensitivity is

2. Use the LEFT and RIGHT buttons to set the

white balance to the desired value. The value

you set wil be displayed on the LCD monitor.

automatically changed by variables

AUTO

: The camera automatically selects the appropriate white

such as lighting value or subject brightness.

balance settings, depending on the prevailing lighting

conditions.

: For taking images outside.

: For taking images under a cloudy and overcast sky.

: For shooting under daylight fluorescent types of three-

way fluorescent lighting.

: Shooting under white fluorescent lighting.

: For shooting under tungsten (standard light bulb) lighting.

: Allows the user to set the white balance according to the

shooting condition.

- 50, 100, 200, 400 : You can increase the shutter speed while the same

amount of light is present, by increasing the ISO

sensitivity. However, the image may be saturated in high

luminance. The higher the ISO value, the higher the

camera’s sensitivity to light is and therefore the greater

its capacity to take pictures in dark conditions. However,

the noise level in the image will increase as the ISO

value increases, making the image appear coarse.

3. When you press the + / - button again, the value you set will be saved and

ISO setup mode will end.

DAYLIGHT

CLOUDY

Fluorescent H

Fluorescent L

TUNGSTEN

CUSTOM

Different lighting conditions may cause a colour cast on your images.

3. Press the + / - button again. The value you set will be saved and White

Balance setup mode will end.

ŝ29Ş

Download from Www.Somanuals.com. All Manuals Search And Download.

+ / - button

ƃ Using the Custom White Balance

White balance settings may vary slightly depending on the shooting

environment.

You can select the most appropriate white balance setting for a given shooting

environment by setting up the custom white balance.

ƈ Exposure compensation : This camera automatically adjusts the exposure

according to the ambient lighting conditions.

You can also select the exposure value by using the

+ / - button.

ƃ Compensating Exposure

1. Press the + / - button, and then use the UP and

DOWN buttons to select the exposure

1. Select the CUSTOM (

White Balance.

) menu of the

compensation icon (

2. Place a sheet of white paper in front of the

camera so that the LCD monitor shows only

white, and then press the SHUTTER button.

3. Your custom white balance value is stored.

- The custom white balance value will be

applied, starting with the next picture you

take.

The exposure compensation menu bar will

appear as shown.

2. Use the LEFT and RIGHT buttons to set the

desired exposure compensation factor.

Measure:Shutter

3. Press the + / - button again. The value you set will be saved and the Exposure

Compensation setup mode will close.

If you change the exposure value, the exposure indicator (

displayed on the bottom of the LCD monitor.

) will be

- The user configured white balance will be

remain effective until it is overwritten.

ſ A negative exposure compensation value reduces the exposure.

Note that a positive exposure compensation value increases the exposure

and the LCD monitor will appear white or you may not get good pictures.

[ White paper ]

ŝ30Ş

Download from Www.Somanuals.com. All Manuals Search And Download.

Using the LCD monitor to set the camera settings

ƈ You can use the menu on the LCD monitor to set up recording functions. In any

mode with the exception of VOICE RECORDING mode, pressing the MENU

button displays the menu on the LCD monitor.

Menu tab Main menu

MODE

Sub menu

Camera working mode Page

p.16

Landscape

Close up

Dawn

Firework

Sunset

Backlight

ſ The menu will not be displayed on the LCD monitor in the following

circumstances:

- When another button is being operated.

- While image data is being processed.

- When there is no battery capacity.

Beach&Snow

ſ Menus are subject to change without prior notice.

The following functions are available, depending on the mode you have selected.

The items indicated by are default settings.

How to use the menu

1. Turn on the camera and press the MENU button. A menu for each camera

mode appears. However, there is no menu for Voice Recording mode (

2. Use the LEFT and RIGHT buttons to navigate through the menus.

Menu tab Main menu

Sub menu

Camera working mode Page

p.32

2560x1920 2272X1704

2048X1536 1600X1200

SIZE

(Still image)

Press the

LEFT or

RIGHT

Press the

LEFT or

RIGHT

1024X768

640X480

160X120

Super Fine

Normal

30 FPS

Multi

640X480

SIZE

2560x1920

2272X1704

2048X1536

1600X1200

1024X768

640X480

QUALITY

Super Fine

METERING

320X240

SIZE

(Movie clip)

Multi

Spot

p.32

Fine

button.

Normal

Fine

QUALITY

p.32

p.33

FRAME RATE

METERING

15 FPS

3. Use the UP and DOWN buttons to select a sub menu.

Spot

Press the

UP or

DOWN

button.

Press the

UP or

DOWN

button.

Single

Continuous

SIZE

2560x1920

2272X1704

2048X1536

1600X1200

1024X768

640X480

SIZE

2560x1920

2272X1704

2048X1536

1600X1200

1024X768

640X480

SIZE

SHOOTING

SHARPNESS

p.33

p.34

2560x1920

2272X1704

2048X1536

1600X1200

1024X768

640X480

AEB

Soft

Normal

Vivid

Basic

Full

OSD

INFORMATION

p.34

4. Select a sub menu, and then the value you set will be saved. Press the

MENU button and the menu will disappear.

LCD Save

ŝ31Ş

Download from Www.Somanuals.com. All Manuals Search And Download.

Size

Quality / Frame rate

ƈ You can select the image size appropriate for your application.

ƈYou can select the compression ratio appropriate for your application of the

captured images.

The higher the compression ratio, the lower the picture quality.

Still image mode

Movie clip mode

Mode

Icon

Mode

STILL IMAGE mode

MOVIE CLIP mode

2560X 2272X 2048X 1600X 1024X 640X 640X 320X 160X

Size

Icon

1920 1704 1536 1200

768

480

240

120

Sub menu Super Fine

Fine

jpeg

Normal

jpeg

30FPS 15FPS

File Format

jpeg

avi

SIZE

2560x1920

2272X1704

2048X1536

1600X1200

1024X768

640X480

320X240

160X120

QUALITY

FRAME RATE

Super Fine

Fine

30FPS

15FPS

Normal

[ STILL IMAGE mode ]

[ MOVIE CLIP mode ]

[ STILL IMAGE mode ]

[ MOVIE CLIP mode ]

INFORMATION

ƃThe higher the resolution, the lower the number of shots available because

high resolution images require more memory.

ƃ This file format complies with the DCF (Design rule for Camera File

system).

ƃ JPEG (Joint Photographic Experts Group) : JPEG is the image

compression standard developed by the Joint Photographic Experts Group.

This type of compression is most commonly used for compressing photos

and graphics because it can compress the files efficiently without damaging

the data.

ŝ32Ş

Download from Www.Somanuals.com. All Manuals Search And Download.

Metering

Continuous shot

ƈ If you cannot obtain suitable exposure conditions, you can change the metering

ƈ You can select continuous shot, and AEB (Auto

method to take brighter pictures.

Exposure Bracketing).

[Multi] : Exposure will be calculated based on an

- [Single]

: Take one picture only

METERING

average of the available light in the image

SHOOTING

- [Continuous] : Images will be taken continuously

until the shutter button is released.

The shooting capacity depends on

the memory.

Multi

Spor

Single

Continuous

AEB

area. However, the calculation will be

biased towards the centre of the image

area. This is suitable for general use.

[Spot] : Only the rectangular area in the centre of

the LCD monitor will be metered for light.

This is suitable when the subject in the

- [AEB]

: Take three pictures in a series in

different exposures: short exposure

(-0.5EV), standard exposure (0.0EV)

[ PROGRAM mode ]

centre is exposed correctly, regardless of the back lighting.

and over exposure (+0.5EV). Use the mode if it is hard to

decide exposure of the object.

ſ If the subject is not the centre of the focus area, do not use the spot metering

as this may result in an exposure error. In this circumstance, It is better to use

exposure compensation.

ſ High resolution and picture quality increases file saving time, which increases

stand-by time.

ſ If the [Continuous] or [AEB] sub menu is selected, the flash will be off

automatically.

ſ If less than 3 pictures are available in the memory, the AEB shooting is not

available.

ſ It is best to use a tripod for the AEB shooting as the time to save each image

file is longer and the blurring caused by camera shake may occur.

ŝ33Ş

Download from Www.Somanuals.com. All Manuals Search And Download.

Sharpness

OSD (On Screen Display) information

ƈ You can adjust the sharpness of the picture you

want to take. You cannot check the sharpness effect

on the LCD monitor before you take a picture,

because this function is applied only when the

captured image is stored on the memory.

ƈIn any mode with the exception of VOICE RECORDING mode, you can check

the recording status in the LCD monitor.

SHARPNESS

Soft

Normal

Vivid

ƈIdle mode : If you select the [LCD Save] and the

OSD INFORMATION

camera isn't operated during the

Full

specified time(about 30 SEC.), the

camera power will be idle (LCD monitor :

Basic

LCD Save

[ PROGRAM mode ]

OFF, Camera status lamp : Blinking)

automatically.

- To use the camera again, press any of the

camera buttons except the power button.

- If there is no operation during the specified time, the camera power will be

turned off automatically to save battery life. Refer to page 54 for more

information about the auto power off function.

Sub menu

Soft

Icon

Description

The edges of the image are softened.

This effect is suitable for editing images on your PC.

The edges of the image are sharp.

This is suitable for printing.

Normal

Vivid

The edges of the image are emphasized. The edges

will appear sharp, but noise may occur in the recorded

image.

[ Full information mode ]

[ Basic information mode ]

ŝ34Ş

Download from Www.Somanuals.com. All Manuals Search And Download.

Starting play mode

ƈIf the memory card is inserted in the camera, all the camera functions apply only

to the memory card.

ƈIf the memory card is not inserted in the camera, all the camera functions apply

only to the internal memory.

ƃ Playing back a movie clip

Steps from 1-2 are the same as those to play back

a still image.

100-0010

3. Select the recorded movie clip and press the

ƈIf you have turned on the camera by pressing the POWER button, you can press

the PLAY MODE button once to switch to Play mode and press it again to switch

to Recording mode.

ƈYou can turn the power on with the play mode button. The camera is turned on in

play mode. Press the play mode button again and the camera will be turned off.

Play & Pause button (

) to play back.

Playꢀ:

Capture:E

00:00:35

- To pause a movie clip file while playing it back,

press the play & pause button again.

- Pressing the play & pause button again will

cause the movie clip file restart.

- To rewind the movie clip while it is playing,

press the LEFT button. To fast forward the

movie clip, press the RIGHT button.

ƈYou can set up the PLAY mode function by using the camera buttons and LCD monitor.

ƃ Playing back a still image

1. Select the PLAY mode by pressing the

- To stop playback of the movie clip, press the play & pause button, and then

press the LEFT or RIGHT button.

play mode button (

2. The last image stored on the memory is

displayed on the LCD monitor.

ƈMovie clip capture function : capture still images from the movie clip.

ƃ How to capture the movie clip

Steps 1-3 are the same as those for playing back

100-0010

a movie clip.

4. Press the Play / Pause button while playing the

movie clip. Then press the E button.

5. The paused movie clip is saved in a new file

name.

3. Select an image that you want to play back

by pressing the LEFT / RIGHT button.

ſ Press and hold the Left or Right button to

fast forward the images played.

Playꢀ:

Capture:E

00:00:12

[Paused]

ſ The captured movie clip file has same size as

the original movie clip (640X480, 320X240,

160X120).

INFORMATION

ƃManner mode : Pressing the play mode button for more than 3 seconds

changes the buzzer and start-up sound setting to OFF, even though you

may have set these to ON.

ƃLightly press the shutter button in Play mode to switch to the currently set

shooting mode.

[Pressing the E button]

ŝ35Ş

Download from Www.Somanuals.com. All Manuals Search And Download.

Starting play mode

LCD monitor Indicator

ƃ Playing back a recorded voice

ƈ The LCD monitor displays shooting information about the displayed image.

Steps from 1-2 are the same as those to play back

a still image.

3. Select the recorded voice file and press the Play

& Pause button (

recorded voice file.

) to play back a

PLAY:ꢀ

- To pause a recorded voice file, while playing it

back, press the play & pause button again.

- To resume playback of the voice file, press the play & pause button.

- To rewind the voice file while it is playing, press the LEFT button.

To fast forward the voice file, press the RIGHT button.

ISO : 50

Av : F 2.8

Tv : 1/30

Flash : On

2560X1920

2006/01/01

- To stop playback of the voice file, press the play & pause button, and then

press the LEFT or RIGHT button.

No.

Description

Play mode icon

Battery

Icon

Page

p.9

Voice Memo

Protect

p.20

p.44

p.46

DPOF

Recording date

Image size

2006/01/01

2560X1920 ~ 256X192

On / Off

p.32

p.21

p.14

p.29

p.53

Flash

Shutter speed

Aperture Value

ISO

8~1/1,500

F2.8 ~ F12.4

50 ~ 400

Folder name & File name

100-0007

ŝ36Ş

Download from Www.Somanuals.com. All Manuals Search And Download.

Using the camera buttons to set the camera

Thumbnail(

) / Enlargement (

) button

ƈIn Play mode, you can use the buttons on the camera to conveniently set up the

ƃ Image enlargement

Play mode functions.

1. Select an image that you want to enlarge and

press the enlargement button.

2. Different parts of the image can be viewed by

pressing the 5 function button.

Thumbnail (

) / Enlargement (

) button

3. Pressing the thumbnail button will zoom back to

the original full sized image.

ƃYou can view multiple pictures, enlarge a selected picture, and crop and save a

selected area of an image.

- You can tell whether the image displayed is an

enlarged view by checking the image

enlargement indicator shown at the bottom left of

the LCD monitor. (If the image is not an enlarged

view, the indicator will not be displayed.) You can

also check the area of enlargement.

- Movie clips and WAV files can’t be enlarged.

- If an image is enlarged, a loss of quality may

occur.

ƃThumbnail display

1. While an image is displayed full screen, press the

thumbnail button.

2. The thumbnail display will highlight the image that

had been showing at the time the thumbnail mode

was selected.

3. Press the 5 function button to move to a desired image.

4. To view an image separately, press the enlargement

button.

Pressing the thumbnail

button (

)

Pressing the enlargement

button (

)

Highlighted image

[ Normal display mode ]

[ Thumbnail display mode ]

ŝ37Ş

Download from Www.Somanuals.com. All Manuals Search And Download.

Thumbnail(

) / Enlargement (

) button

Voice ( ) memo / Up button

ƃThe maximum enlargement rate in proportion to the image size.

ƈWhen the menu is displayed on the LCD monitor, pressing the UP button makes

the menu cursor move up.

ƈWhen the menu is not displayed on the LCD monitor, the UP button operates as

the voice memo button. You can add your voice to a stored still image.

Image size

VGA

X2.5

Maximum

enlargement rate

X10.0

X8.9

X8.0

X6.3

X4.0

ƃAdding a Voice Memo to a Still Image

1. Press the LEFT / RIGHT button to select an

image that you wish to add sound to.

ƃTrimming : You can extract part of the image that

you want and save it separately.

1. Select an image that you want to enlarge and

press the enlargement button.

2. Different parts of the image can be viewed by

pressing the 5 function button.

3. Press the MENU button and a message will be displayed as shown

2. Press the voice memo button (

voice memo indicator will display. The camera is

now ready to record a voice memo.

) and the

Trimming?

Yes No

Confirm:OK

3. Press the shutter button to start recording and

voice will be recorded to the still image for 10

seconds.

alongside.

While the voice is recording, the recording status

window will be displayed as shown alongside.

Stop:Shutter

4. Select a desired sub menu by pressing the LEFT / RIGHT button and press

the OK button.

[Yes] : The trimmed image will save as a new file name, and display on the

LCD monitor.

4. The recording can be stopped by pressing

the shutter button again.

[No] : The trimming menu will disappear.

5. The (

) icon will be displayed on the LCD

monitor after voice memo recording has finished.

- Voice memos can’t be recorded onto movie

clip and voice recording files.

ſ If there is little memory space to save the trimmed image, the image can’t be

trimmed.

ſ To delete the enlarged image during the trimming function, press the delete

- A distance of 40cm between you and the

camera (microphone) is the best distance to

record sound.

button.

- The voice memo will be saved in ҭ.wav format, but has the same file name

as the still image to which it corresponds.

- If you add a new voice memo to the still image that already has a voice

memo, the existing voice memo will be erased.

ŝ38Ş

Download from Www.Somanuals.com. All Manuals Search And Download.

Play & Pause (

) / Down button

E (Effect) button

ƈIn Play mode, the play & pause/ down button works as follows:

ƈ It is possible to add special effects to your images by using this button.

- If the menu is displayed

Press the DOWN button to move from the main menu to a sub menu, or to

move down the sub menu cursor.

1. Select a still image or movie clip and press

the E button.

2. Select a desired sub menu and press

the OK button.

- If a still image with a voice memo, a voice file, or a movie clip is playing

In Stop mode

: Plays a still image with a voice memo, a voice file, or a

movie clip.

Exit:E

: Captured images will be stored in

black and white.

During playback : Temporarily stops playback.

In Pause mode : Resumes playback

: Captured images will be stored in a sepia tone

(a gradient of yellowish brown colours).

: Captured images will be stored in a red tone.

: Captured images will be stored in a green tone.

: Captured images will be stored in a blue tone.

: Save the image in negative mode.

STOP:OK

EXIT:OK

PLAY:ꢀ

PAUSE:ꢀ

PLAY:ꢀ

REWꢁ

ꢀFF

ſ The changed image is saved in a new file name.

[Voice recording is stopped]

[Voice recording is playing]

[Voice recording is paused]

ŝ39Ş

Download from Www.Somanuals.com. All Manuals Search And Download.

Delete ( ) button

Printer button

ƈThis deletes images stored on the memory.

ƈ If you select [Computer] sub menu in the [USB]

setup menu, [Connecting Computer] message will

display when you connect the camera to your

printer and the connection will not be established.

In this case, press the Printer button. [Connecting

Printer] message will display and the Easy printing

mode will be selected.

ƃDeleting Images in Play Mode

1. Select an image that you want to delete by

pressing the LEFT / RIGHT button and press the

DELETE(

) button.

2. A message will display as shown alongside on

the LCD monitor.

3. Select the sub menu values by pressing

the LEFT / RIGHT button and then press

the OK button.

Delete?

Yes

* In some instances the camera may not connect to the printer, this will depend on

the make of the printer.

Confirm:OK

If [Yes] is selected : deletes the selected images.

If [No] is selected : cancels "Delete Image".

- After the connection, the Easy printing menu

IMAGES

will display on the LCD monitor.

To display the PictBridge menu, press the

Menu button. For more information about the

PictBridge menu, refer to page 49.

ƃDeleting Images in Thumbnail Display Mode

1. Use the UP, DOWN, LEFT, and RIGHT buttons to select the image you want

to delete, and then press the DELETE ( ) button.

2. A message will display on the LCD monitor as shown below.

3. Select the sub menu values by pressing the LEFT / RIGHT button and then

press the OK button.

One Pic

All Pics

ꢂ

Move:

ꢃ

Exit:MENU

If [Yes] is selected : deletes the selected images.

If [No] is selected

: cancels "Delete Image".

Press the

delete button.

Delete?

Yes

Confirm:OK

INFORMATION

ƃBefore deleting images from the camera, you should protect or download

images to your computer that you wish to keep.

ŝ40Ş

Download from Www.Somanuals.com. All Manuals Search And Download.

Left / Right / Menu / OK button

Setting up the play back function using the LCD monitor

ƈ LEFT / RIGHT / MENU / OK buttons activate the following.

ƈ PLAY mode functions can be changed by using the LCD monitor. In the PLAY

mode, pressing the MENU button displays the menu on the LCD monitor. The

menus you can set up in Play mode are as follows. To capture an image after

setting up the play menu, press the PLAY mode button or shutter button.

- LEFT button

: While the menu is showing, press the LEFT button to select

the menu tab to the left of the cursor. While the menu is not

showing, press the LEFT button to select the previous

image.

- RIGHT button : While the menu is showing, press the RIGHT button to select

the menu tab to the right of the cursor, or to move to a

secondary menu. While the menu is not showing, press the

RIGHT button to select the next image.

- MENU button : When you press the MENU button, the play mode menu will

be displayed on the LCD monitor. Pressing it again will return

the LCD to the initial display.

Menu tab Main menu

Sub menu

Show

Secondary menu

Play / Repeat Play

1, 3, 5, 10 sec

OFF

Page

Interval

p.43~44

SLIDE

Effect

Select

All Pics

- OK button

: When the menu is displayed on the LCD monitor, the OK

button is used for confirming data that is changed by using

the 5 function button.

PROTECT

DELETE

Unlock / Lock

p.44

p.45

Select

All Pics

2272 X 1704

2048 X 1536

1600 X 1200

1024 X 768

640 X 480

User Image 1, 2

RESIZE

p.45

ŝ41Ş

Download from Www.Somanuals.com. All Manuals Search And Download.

Setting up the play back function using the LCD monitor

ƈ This menu is available while the camera is connected to a PictBridge supporting

printer (direct connection to the camera, sold separately) with a USB cable.

Menu tab Main menu

Sub menu

Right 90°

Left 90°

180°

Secondary menu

Page

Menu tab Main menu

IMAGES

Sub menu

One Pic

All Pics

Secondary menu

Page

p.50

ROTATE

p.46

Horizontal

Vertical

Standard

Index

AUTO SET

p.50

Yes

Select / All Pics / Cancel

Auto

Postcard

Card

4X6

DPOF

No / Yes

p.46

p.48

p.49

Size

Select / All Pics / Cancel

COPY TO CARD

Yes

Size

Full

OSD

Letter

Basic

INFORMATION

OSD Off

CUSTOM

SET

p.51

Auto

Full

Layout

Index

ŝ42Ş

Download from Www.Somanuals.com. All Manuals Search And Download.

Setting up the play back function using the LCD monitor

Starting the slide show

ƈ Images can be displayed continuously at pre-set intervals.

You can view the slide show by connecting the camera to an external monitor.

1. Press the play mode button and press the menu button.

Menu tab Main menu

Sub menu

Secondary menu

Page

Auto

Plain

2. Press the LEFT / RIGHT button and select the [SLIDE] menu tab.

Type

Photo

ƃ Start the slide show : The slide show can start only in the [Show] menu.

Fastphoto

1. Use the Up / Down buttons to select the [Show]

menu and press the Right button.

2. Select a desired sub menu by pressing the

Up / Down button.

Auto

SLIDE

Play

Repeat Play

Draft

Show

Interval

Effect

Quality

CUSTOM

SET

Normal

p.51

Fine

[Play]

: The slide show is closed after one

cycle.

Back:ꢁ

Set:OK

Auto

[Repeat Play] : The slide show is repeated until

cancelled.

3. To save the changed settings, press the OK

button. And then the slideshow will be started.

Date

Off

Auto

File name

Off

ƃ Setting play interval: Set the slide show play interval.

1. Select the [Interval] sub menu by pressing the

UP / DOWN button and press the RIGHT button.

2. Use the Up / Down buttons to select the desired

interval.

Standard

Index

DPOF PRINT

RESET

p.51

p.52

SLIDE

Show

Interval

Effect

1 sec

3 sec

5 sec

10 sec

Yes

3. Press the OK button to save the configuration.

Back:ꢁ

Set:OK

Yes

INFORMATION

ƃ The loading time depends on the image size and quality.

ƃ While the slide show is playing, only the first frame of a MOVIE file is

displayed.

ſ Menus are subject to change without prior notice.

ƃ While the slide show is playing, the voice recording file will not display.

ŝ43Ş

Download from Www.Somanuals.com. All Manuals Search And Download.

Starting the slide show

Protecting images

ƃ Configure slide show effects : Unique screen effects can be used for the slide

ƈ This is used to protect specific shots from being accidentally erased (Lock).

show.

It also unprotects images that have been previously protected (Unlock).

1. Select the [Effect] sub menu by pressing the

UP / DOWN button and press the RIGHT button.

2. Use the Up / Down button to select the type of

effect.

ƃ Protecting Images

1. Press the play mode button and press the menu

SLIDE

Show

Interval

Effect

OFF

PROTECT

button.

Select

All Pics

2. Press the LEFT / RIGHT button and select the

[PROTECT] menu tab.

3. Select a desired sub menu by pressing the UP /

DOWN button and press the OK button.

[Select ] : Selection window for an image to be

protected/released is displayed.

- Up / Down / Left / Right : Select an image

- Zoom W / T Button : Protect / release the image

: Normal display.

Back:ꢁ

Set:OK

: Image is displayed slowly.

: Image is displayed slowly from the centre

outwards.

: Image moves from the top left.

: The image slides diagonally from top left to

bottom right.

ꢂ

Move:

ꢃ

Exit:MENU

: The image slides irregularly.

3. Press the OK button to confirm the setting.

Wꢁ

Unlock

Set:OK

ꢀT

- OK button

: Your changes will be saved

and the menu will

disappear.

[All Pics] : Protect / release all saved images

- Zoom W / T Button : Protect / release the images

ꢁ

Unlock

ꢀT

- OK button

: Your changes will be saved

and the menu will disappear.

Set:OK

- If you protect an image, the protect icon will be

displayed on the LCD monitor. (An unprotected

image has no indicator)

- An image in LOCK mode will be protected from

the delete function or [Delete] functions, but will

NOT be protected from the [Format] function.

ŝ44Ş

Download from Www.Somanuals.com. All Manuals Search And Download.

Deleting images

Resize

ƈ Of all the files stored in the memory card, the unprotected files in the DCIM

subfolder will be deleted. Remember that this will permanently delete

unprotected images. Important shots should be stored on a computer before

deletion takes place. The startup image is stored in the camera's internal

memory (i.e., not on the memory card) and it will not be deleted even if you

delete all files on the memory card.

ƈ Change the resolution (size) of pictures taken. Select the [User Image] to save

an image to be the start-up image. The resized image will have a new file name.

1. Press the play mode button and press the menu

button.

RESIZE

2272X1704

2. Press the LEFT / RIGHT button and select the

[RESIZE] menu tab.

3. Select a desired sub menu by pressing the UP /

2048X1536

1600X1200

1024X768

640X480

ꢂ

Move:

ꢃ

ƃ Deleting images

Exit:MENU

DOWN button and press the OK button.

1. Press the play mode button and press the menu

button.

DELETE

Select

ƃ Image Resize Types

2. Press the LEFT / RIGHT button and select the

[Delete] menu tab.

All Pics

2272 X

1704

2048 X

1536

1600 X

1200

1024 X

768

640 X

480

User

Image 1,2

Resize

3. Select a desired sub menu by pressing the UP /

DOWN button and press the OK button.

[Select] : Selection window for an image to delete

is displayed.

ꢂ

Move:

ꢃ

Exit:MENU

- Up / Down / Left / Right : Select an image

- Zoom T Button : Select the image for deletion.

Select:T

Del:OK

(

mark)

VGA

- OK Button

: Press the OK button to display

the confirmation message.

Select the [Yes] menu and

press the OK button to delete

marked images.

ƃ A large sized image can be resized to a smaller sized image, but not vice versa.

ƃ Only JPEG images can be resized. Movie clip (AVI), Voice recording (WAV) files

can’t be resized.

ƃ You can change the resolution of only those files compressed in the JPEG 4:2:2

format.

ƃ The resized image will have a new file name. The [User Image] image is stored

not on the memory card but on the internal memory.

ƃ Only two [User Image] images can be saved.

ƃ If the memory capacity is insufficient to store the resized image, a [Memory Full!]

message will display on the LCD monitor and the resized image will not be

stored.

Delete?

Yes

Confirm:OK

Del:OK

[All Pics] : Displays confirmation window. Select

the [Yes] menu and press the OK

button to delete all unprotected images. If there aren’t protected

images, all the images are deleted and a [No Image!] message will

display.

4. After deletion, the screen will be changed to the play mode screen.

ŝ45Ş

Download from Www.Somanuals.com. All Manuals Search And Download.

Rotating an image

DPOF

ƈ You can rotate the stored images by various degrees. Once the playback of the

rotated picture is finished, it will switch back to the original state.

ƈ DPOF(Digital Print Order Format) allows you to embed printing information on

your memory card’s MISC folder. Select the pictures to be printed and how

many prints to make.

1. Press the play mode button and press the menu

button.

ROTATE

ƈ The DPOF indicator will display on the LCD monitor when an image that has

DPOF information plays back. Images can then be printed on DPOF printers,

or at an increasing number of photo labs.

Right 90Ŋ

2. Press the LEFT / RIGHT button and select the

[ROTATE] menu tab.

3. Select a desired sub menu by pressing the UP /

DOWN button.

Left 90Ŋ

180Ŋ

Horizontal

Vertical

ꢂ

Move:

ꢃ

ƈ This function is not available for Movie clips and Voice recording files.

Exit:MENU

ƈ When this menu is selected without inserting a memory card, you can select the

[DPOF] menu but the menu can't be run.

[Right 90˚] :

Rotate picture in a

clock-wise direction

[Left 90˚] :

Rotate picture in a counter- Rotate picture 180

clock-wise direction degrees

[180˚] :

[Horizontal] :

Rotate picture horizontally

[Vertical] :

Rotate picture vertically

4. Press the OK button and the rotated image will be displayed.

If you display the rotated image on the LCD monitor, empty spaces may

appear to the left and right of the image.

ŝ46Ş

Download from Www.Somanuals.com. All Manuals Search And Download.

DPOF : Standard

DPOF : Index

ƈ This function allows you to embed printing quantity information on a stored

ƈ Images (except for movie clips and voice file) are printed as index type.

image.

1. Press the play mode button and press the menu

button.

1. Press the play mode button and press the menu

button.

2. Press the LEFT / RIGHT button and select the

[DPOF] menu tab.

3. Select the [Standard] menu by pressing the UP /

DOWN button and press the RIGHT button.

4. Select a desired sub menu by pressing the UP /

DOWN button and press the OK button.

[Select] : Selection window for an image to print is

displayed.

DPOF

Standard

Index

Size

DPOF

2. Press the LEFT / RIGHT button and select the

[DPOF] menu tab.

3. Select the [Index] menu by pressing the UP /

DOWN button and press the RIGHT button.

4. Select a desired sub menu by pressing the UP /

DOWN button.

If [No] is selected : Cancel the index print setting.

If [Yes] is selected : The image will be printed in index format.

5. Press the OK button to confirm the setting.

Yes

Standard

Index

Size

Select

All Pics

Cancel

Back:ꢁ

Set:OK

Back:ꢁ

Set:OK

ꢁ

00Print

ꢀT

Up / Down / Left / Right Select an image to print.

Set:OK

- Zoom W / T Button : Select the number of prints.

[All Pics] : Configure number of prints for all

pictures except movie and voice files.

- W / T button : Select a number of prints

[Cancel] : Cancel the print setup.

?ꢁ

ꢀꢀꢁ8:16<ꢁꢁꢁ

ꢀ<

5. Press the OK button to confirm the setting.

If an image carries DPOF instructions, the DPOF

Set:OK

indicator (

) will show.

ŝ47Ş

Download from Www.Somanuals.com. All Manuals Search And Download.

DPOF : Print size

Copy To Card

ƈ You can specify the print size when printing images stored on the memory card.

ƈ This enables you to copy image files, movie clips and voice recording files to the

The [Size] menu is available only for DPOF 1.1 compatible printers.

memory card.

ƃ Copying to the Memory Card

1. Press the play mode button and press the menu

ƃ Setting the Print Size

1. Press the play mode button and press the menu

COPY TO CARD

button.

DPOF

button.

Yes

Standard

Index

Size

2. Select the [COPY TO CARD] menu tab by

pressing the LEFT / RIGHT button.

3. Select a desired sub menu by pressing the UP /

DOWN button and press the OK button.

- [No] : Cancels "Copy to Card".

- [Yes] : All images, movie clips and voice recording files saved in the internal

memory are copied to the memory card after the [Processing!]

message is displayed. After copying has been completed, the

screen will return to play mode.

2. Press the LEFT / RIGHT button and select the

[DPOF] menu tab.

Select

All Pics

Cancel

ꢂ

Move:

ꢃ

Exit:MENU

3. Select the [Size] menu by pressing the UP /

DOWN button and press the RIGHT button.

4. Select a desired sub menu by pressing the UP /

DOWN button and press the OK button.

[Select] : Selection window for an image to be

changed printed size is displayed.

Back:ꢁ

Set:OK

ꢁ

Cancel

Set:OK

ꢀT

Up / Down / Left / Right

Select an image.

- Zoom W / T Button : Change the print size.

INFORMATION

- OK button

: Your changes will be saved

and the menu will

disappear.

ƃ When this menu is selected without inserting a memory card, you can select

the [COPY TO CARD] menu but the menu can’t be run.

ꢁ

Cancel

ꢀ

If there is not enough space available in the memory card to copy saved images

in the internal memory (20MB), the [COPY TO CARD] command will copy only

some of the images and display [Memory Full!] message. Then the system will

return to the playback mode. Please be sure to delete any unnecessary files to

free up space before inserting the memory card into the camera.

[All Pics] : Change print size of all saved images.

- W / T button : Select a print size

- OK button : Confirm the changed setting.

[Cancel] : Cancel all of the print size settings.

Set:OK

ƃ When you move the images that are stored in the internal memory by doing

[COPY TO CARD] to the card, the next number of file names will be created

in the card to avoid duplication of the file name.

- When the [Reset] of the [File] setup menu is set : The copied file names

start from after the last stored file name.

ſ DPOF [Size] secondary menu : Cancel, 3X5, 4X6, 5X7, 8X10

INFORMATION

ƃ Depending on the manufacturer and print model, canceling the printing may

take a little longer for the printer to process.

When the [Series] of the [File] setup menu is set : The copied file names start

from after the last captured file name. After completing [COPY TO CARD], the

last stored image of the last copied folder is displayed on the LCD monitor.

ŝ48Ş

Download from Www.Somanuals.com. All Manuals Search And Download.

On Screen Display information

PictBridge

ƈ You can check shooting information about the displayed image.

ƈ You can use the USB cable to connect this camera to a printer that supports

PictBridge (sold separately) and print the stored images directly. Movie clips and

voice files cannot be printed.

ƃ How to select the type of information you want to see

1. Press the play mode button and press the menu

button.

2. Select the [OSD INFORMATION] menu tab by

pressing the LEFT / RIGHT button.

OSD INFORMATION

ƃ Setting up the camera for connection with the printer

1. In any mode with the exception of Voice

Full

Basic

OSD Off

SETUP

Recording mode, press the MENU button.

2. Press the LEFT / RIGHT button and select

[SETUP] menu tab.

3. Select [USB] menu by pressing the UP / DOWN

button and press the RIGHT button.

Format

Date&Time

Imprint

Sound

USB

3. Select a desired sub menu by pressing the UP /

DOWN button and press the OK button.

ꢂ

Move:

ꢃ

Exit:MENU

Computer

Printer

Back:ꢁ

Set:OK

4. Select [Printer] menu by pressing the UP / DOWN

button and press the OK button.

ISO : 50

Av : F 2.8

Tv : 1/30

Flash : On

1024 X 768

2006/01/01

ƈ Connecting the Camera to a Printer

Connect the camera to a printer’s USB port with the supplied USB cable.

[Full]

[Basic]

[OSD Off]

ŝ49Ş

Download from Www.Somanuals.com. All Manuals Search And Download.

PictBridge : Picture Selection

ſ If you selected [Computer] in Step 4, when you connected the camera to your

printer, the [Connecting Computer] message will display and the connection will

not be established. In this case, disconnect the USB cable, and then follow the

procedure from Step 2 and onward. Or, press the Printer button and the camera

is connected to the printer displaying the [Connecting Printer] message. But, the

camera may not connect to the printer, depending on the make and model of the

printer.

ƃ Setting the Number of Copies to Print

- Select [One Pic] or [All Pics]. A screen where you can set the number of copies

to print will appear as shown below.

ꢂ

ꢃ

ꢂ

ꢃ

PREVꢁ

ꢀNEXT

ƈ Easy printing

Exit:Shutter

Set:OK

Exit:Shutter

Set:OK

When you connect the camera to printer in the Play

back mode, you can print a picture easily.

[When [One Pic] is selected]

[When [All Pics] is selected]

- Pressing the printer(

Currently displayed image will be printed with the

printer’s default setting.

- Pressing the Left / Right button :

Selects a previous / next image.

) button :

- Press the Up / Down button to select the number of prints.

- When [One Pic] is selected : Use the Left / Right button to select another

picture. After selecting another picture, select the number of prints for another

picture.

- After setting the number of prints, press the OK button to save.

- Press the Shutter button to return to the menu without setting the number of

prints.

Print:

Menu:OK

ƈ Select pictures to print

1. Press the Menu button.

2. The [IMAGES] menu will appear.

3. Use the UP and DOWN buttons to select the

desired sub menu value, and then press the OK

button.

IMAGES

One Pic

All Pics

PictBridge : Print Setting

ƈ AUTO SET

1. Use the LEFT and RIGHT buttons to select the

[AUTO SET] menu tab.

2. Use the UP and DOWN buttons to select the

ꢂ

Exit:MENU

Move:

ꢃ

When [One Pic] is selected :

The PictBridge function will be applied only to the

picture currently displayed.

AUTO SET

Yes

desired sub menu value, and then press the OK

button.

[No] : [CUSTOM SET] values are kept.

[Yes] : All values in the [CUSTOM SET] are

automatically changed.

When [All Pics] is selected :

The PictBridge function will be applied to all pictures, excluding movie clips

and voice files.

ꢂ

Move:

Exit:MENU

ꢃ

ŝ50Ş

Download from Www.Somanuals.com. All Manuals Search And Download.

PictBridge : Print Setting

PictBridge : Printing

ƈ Custom Set : You can select the Paper Size, Print Format, Paper Type, Print

ƈ Printing Pictures

Quality, Date Print, and File Name Print menus for printed pictures.

1. Use the LEFT and RIGHT buttons to select the [PRINT] menu tab.

2. Use the UP and DOWN buttons to select the desired sub menu value, and

then press the OK button.

1. Use the LEFT and RIGHT buttons to select the

[CUSTOM SET] menu tab.

CUSTOM SET

Auto

[Standard] : Print the pictures stored in the

Size

2. Use the UP and DOWN buttons to select the

desired sub menu value, and then press the

RIGHT button.

Layout

Type

Quality

Date

Auto

memory card in set numbers.

Standard

One picture is printed on one piece

Index

ꢂ

Exit:MENU

Move:

ꢃ

of paper.

3. Use the UP and DOWN buttons to select the

desired sub menu value, and then press the OK

button.

[Index]

: Print multiple images on one sheet

of paper.

ꢂ

Move:

ꢃ

Exit:MENU

3. The screen shown on the right will appear and the

picture will be printed. If no picture is selected, the

[No Image!] message will be displayed. Press the

LEFT button while printing to cancel the printing

and the [PRINT] menu is displayed.

Size

Sub menu

Function

Now Printing

001 / 001

Setting the size of the printing

paper

Auto, PostCard, Card, 4x6, L, 2L,

Letter, A4, A3

Setting the number of pictures to

be printed on a sheet of paper

Cancel:ꢁ

Layout

Type

Auto, Full, 1, 2, 4, 8, 9, 16, Index

Auto, Plain, Photo, FastPhoto

Auto, Draft, Normal, Fine

ſ Number of pictures in an index print varies

depending on the printer used.

Setting the quality of the printing

paper

Setting the quality of the picture

to be printed

Quality

Date

Setting whether to print the date Auto, Off, On

Setting whether to print the file

Auto, Off, On

File Name

name

ſ Some menu options are not supported in all manufacturer and printer models.

If not supported, the menus are still displayed in the LCD, but are not selectable.

ſ If the setting values are not changed in the automatic / manual setting, the

setting values are automatically kept.

ŝ51Ş

Download from Www.Somanuals.com. All Manuals Search And Download.

PictBridge : Printing

Setup menu

ƈ DPOF Print : This allows you to directly print the files with DPOF information.

ƈIn this mode, you can set up basic settings. You can use the setup menu in all

camera modes, except Voice Recording mode.

1. Use the LEFT and RIGHT buttons to select the

[DPOF PRINT] menu tab.

2. Use the UP and DOWN buttons to select the

desired sub menu value, and then press the

OK button.

[No] : Cancel the printing

[Yes] : Directly print the file with the DPOF

information

The items indicated by

Menu tab Main menu

File

are default settings.

DPOF PRINT

Yes

Sub menu

Series

Reset

Secondary menu

Page

p.53

p.54

ꢀ

Exit:MENU

Move:

ꢁ

Off, 1, 3, 5, 10 min

ENGLISH

Power Off

FRANÇAIS

ITALIANO

DEUTSCH

ESPAÑOL

ſ Depending on the manufacturer and printer model, some menus may not be

available.

PORTUGUÊS

SVENSKA

BAHASA

POLSKI

DUTCH

SUOMI

When a printer does not support DPOF, the menu is still displayed but not

available.

Language

p.54

DANSK

Magyar

PictBridge : Reset

Yes

p.55

Format

ƈ Initialises user-changed configurations.

06/01/01 13:00

yy/mm/dd

Off

dd/mm/yy

mm/dd/yy

Off

Date

Date&Time

Off

1. Use the LEFT and RIGHT buttons to select the

[RESET] menu tab.

2. Use the UP and DOWN buttons to select the

desired sub menu value, and then press the OK

RESET

Date&Time

Yes

button.

ꢀ

Move:

Exit:MENU

ꢁ

If [No] is selected : Settings will not be reset.

If [Yes] is selected : All print and image settings

will be reset.

Imprint

Sound

p.55

p.56

ſ Default print setting varies depending on the printer manufacturer.

For your printer’s default setting, refer to the user’s guide that came with your

printer.

Low

Medium

High

ŝ52Ş

Download from Www.Somanuals.com. All Manuals Search And Download.

Setup menu

Menu tab Main menu

Sub menu

Computer

Printer

Off

Secondary menu

Page

p.56

[ File name ]

ƈ This function allows the user to select the file naming format.

USB

ƃ Assigning File Names

1. In any mode with the exception of Voice

Recording mode, press the MENU button.

2. Press the LEFT / RIGHT button and select the

AF Lamp

p.56

SETUP

Series

Reset

File

Power Off

Language

Format

Date&Time

Dark

[SETUP] menu tab.

Normal

Bright

LCD

3. Select the [File ] menu by pressing the UP /

DOWN button and press the RIGHT button.

4. Select a desired sub menu by pressing the UP /

DOWN button and press the OK button.

[Series] : New files are named using numbers that follow the previous

sequence, even when a new memory card is used, or after

formatting, or after deleting all pictures.

[Reset] : After using the reset function, the next file name will be set from

0001 even after formatting, deleting all or inserting a new memory

card.

Back:

ꢂ

Set:OK

NTSC

Video Out

Quick View

Reset

p.57

p.58

PAL

Off / 0.5, 1, 3 sec

Yes

Alkaline

Ni-MH

Battery type

p.58

ſ Menus are subject to change without prior notice.

5. Press the menu button twice and the menu will disappear.

- The first stored folder name is 100SSCAM, and the first file name is

SD530001.

- File names are assigned sequentially from SD530001 ƍ SD530002 ƍ ~ ƍ

SD539999.

- The folder number is assigned sequentially from 100 to 999 as follows:

100SSCAM ƍ 101SSCAM ƍ ~ ƍ 999SSCAM.

- The files used with the memory card conform to the DCF(Design rule for

Camera File systems) format.

ŝ53Ş

Download from Www.Somanuals.com. All Manuals Search And Download.

Setup menu

[ Auto power off ]

[ Language ]

ƈ This function switches the camera off after a set amount of time in order to

prevent unnecessary battery drainage.

ƈ There is a choice of languages that can be displayed on the LCD monitor.

Even if the battery is removed and inserted again, the language setting will be

preserved.

ƃ Sub menus

- LANGUAGE sub menu : English, Korean, French,

German, Spanish, Italian, S.Chinese, T.Chinese,

[Off]

: The power off function will not

operate.

SETUP

File

ENGLISH

File

Off

Japanese, Russian, Portuguese, Dutch, Danish,

Swedish, Finnish, Thai, BAHASA(MALAY /

INDONESIAN), Arabic, Czech, Polish, Hungarian

and Turkish.

[1, 3, 5, 10 min] : The power will turn off

automatically if not used for the

Power Off

Language

Format

Power Off

Language

Format

1 min

FRANÇAIS

DEUTSCH

ESPAÑOL

3 min

5 min

10 min

Date&Time

period of time specified.

Back:ꢂ

Set:OK

Back:ꢂ

Set:OK

- After replacing the battery, the power off setting

will be preserved.

- Note that the automatic power off function will not operate if the camera is in

PC mode, slide show, playing back a voice recording, playing back a movie clip

and taking a composite shot.

ŝ54Ş

Download from Www.Somanuals.com. All Manuals Search And Download.

Setup menu

[ Formatting a memory ]

[ Setting up the Date / Time / Date type ]

ƈ This is used for formatting the memory. If you run [Format] on the memory, all

images, including the protected images, will be deleted. Be sure to download

important images to your PC before formatting the memory.

ƈ You can change the date and time that will be displayed on the captured images

and set up the date type.

ƃ Setting Date / Time & Selecting Date Format

ƃ Sub menus

[No] : The memory will not be formatted. Press the

menu button three times and the menu display

will disappear.

[Yes] : A [Processing!] message appears and the

RIGHT button : Selects the year/ month/ day/ hour/

SETUP

minute date type.

LEFT button : Moves the cursor to the

[Date&Time] main menu if the

cursor is at the first item of the date

and time setup. In all other cases,

the cursor will be shifted to the left of its current position.

UP and DOWN buttons : Changes the setting value

File

ꢀ

06/01/01

ꢁ

13:00

yy/mm/dd

SETUP

Power Off

Language

Format

File

Power Off

Language

Date&Time

ꢂ

Format

Back:

Set:OK

Date&Time

Yes

memory will be formatted. If you run FORMAT

in Play mode, a [No Image!] message will

appear.

Back:

ꢂ

Set:OK

- Date type : [yy/mm/dd], [Off], [dd/mm/yy], [mm/dd/yy]

Be sure to run [Format] on the following types of memory card.

- A new memory card, or an unformatted memory card.

- A memory card that has a file this camera can't recognise or one that has been

taken from another camera.

[ Imprinting the recording date ]

ƈ There is an option to include DATE / TIME on still images.

- Always format the memory card using this camera. If you insert a memory card

that has been formatted using other cameras, memory card readers, or PCs,

you will get a [Card Error!] message.

ƃ Sub menus

[Off]

: The DATE & TIME will not be

imprinted on the image file.

: Only the DATE will be imprinted on

the image file.

SETUP

Power Off

Language

Format

[Date]

Off

Date&Time

Imprint

Date

Date&Time

Set:OK

[Date&Time] : The DATE & TIME will be imprinted

on the image file.

Back:ꢂ

ŝ55Ş

Download from Www.Somanuals.com. All Manuals Search And Download.

Setup menu

[ Sound ]

[ Auto Focus lamp ]

ƈ If you set sound to ON, various sounds will be activated for camera startup,

when buttons are pressed, so that you can be aware of the camera operation

status.

ƈ You can turn on and off the Auto Focus lamp.

ƃ Sub menus

[Off] : The AF lamp will not light up in a low light

ƃ [Sound] sub menu : Off / Low / Medium / High

SETUP

condition.

Date&Time

Imprint

Sound

SETUP

[On] : The AF lamp will light up in a low light

condition.

Language

Format

Off

USB

AF Lamp

Off

Date&Time

Imprint

Sound

Low

Medium

High

Back:ꢂ

Set:OK

Back:ꢂ

Set:OK

[ Connecting an External Device (USB) ]

ƈ You can select an external device to which you want to connect the camera

[ LCD brightness ]

ƈ You can adjust the LCD brightness.

using the USB cable.

ƃ [LCD] sub menu : Dark, Normal, Bright

ƃ Sub menus

SETUP

Imprint

Sound

USB

AF Lamp

LCD

- [Computer] : Select this if you want to connect the

SETUP

Dark

Normal

Bright

camera to your PC.

Format

Refer to page 69 for instructions on

how to connect the camera to your

PC.

Date&Time

Imprint

Sound

Back:ꢂ

Set:OK

Computer

Printer

USB

Back:ꢂ

Set:OK

- [Printer]

: Select this if you want to connect the

camera to your printer.

Refer to page 49 for instructions on

how to connect the camera to your

printer.

ŝ56Ş

Download from Www.Somanuals.com. All Manuals Search And Download.

Setup menu

- NTSC : U.S.A, Canada, Japan, South Korea, Taiwan, Mexico.

[ Selecting Video out type ]

PAL

: Australia, Austria, Belgium, China, Denmark, Finland, Germany,

U.K., Holland, Italy, Kuwait, Malaysia, New Zealand, Singapore,

Spain, Sweden, Switzerland, Thailand, Norway.

ƈ The Movie output signal from the camera can be NTSC or PAL.

Your choice of output will be governed by the type of device (monitor or TV, etc.)

to which the camera is connected. PAL mode can support only BDGHI.

- When using a TV as an external monitor, you will need to select the external or

AV channel of the TV.

- There will be a digital noise on the external monitor, but it is not a malfunction.

- If the image is not in the centre of the screen, use the TV controls to centre it.

- When the camera is connected to an external monitor, the menu will be visible

on the external monitor and the menu functions are the same as those

indicated on the LCD monitor.

- When selecting the PAL video out type, the TV monitor turns off and the LCD

monitor of the camera turns on when you record a movie. After completing the

recording, the TV monitor turns on and the LCD monitor of the camera turns off.

ƈ Connecting to an external monitor

Connect the camera to an external monitor with

the AV cable(Optional).

SETUP

Sound

USB

AF Lamp

LCD

NTSC

PAL

Video Out

Back:ꢂ

Set:OK

[ Quick view ]

ƈ If you enable Quick View before capturing an image, you can view the image

you just captured on the LCD monitor for the duration set in the [Quick View]

setup. Quick view is possible only with still images.

ƃ Sub menus

[Off]

: The quick view function can’t be

activated.

SETUP

USB

AF Lamp

LCD

Video Out

Quick View

Off

0.5 sec

1 sec

3 sec

[0.5, 1, 3 sec] : The captured image is briefly

displayed during the selected time.

Yellow - Video

White - sound

Back:ꢂ

Set:OK

ŝ57Ş

Download from Www.Somanuals.com. All Manuals Search And Download.

Setup menu

Setting up the Mycam menu

ƈ You can set up a start up image, start up sound and shutter sound. Every

camera working mode (with the exception of Voice recording mode) has the

[ Initialisation ]

ƈ All camera menu and function settings will be restored to their default values.

However, values for DATE / TIME, LANGUAGE, and VIDEO OUT will not be

changed.

MyCAM menu. The items indicated by

are default settings.

Menu tab

Main menu

Start Image

Sub menu

Page

p.58

Off

User Image 1

Off

LOGO

User Image 2

Sound 1

ƃ Sub menus

[No] : Settings will not be restored to their defaults.

[Yes] : All settings will be restored to their defaults.

SETUP

AF Lamp

LCD

Video Out

Quick View

Reset

Start Sound

p.59

Sound 2

Off

Sound 3

Yes

Sound 1

Shutter Sound

Sound 2

Sound 3

Back:ꢂ

Set:OK

ſ Menus are subject to change without prior notice.

[ Selecting a battery type ]

ƈ If a battery type is selected, the camera will be optimized according to the

selected battery type.

Start up image

ƈ You can select the image that is first displayed on the LCD monitor whenever

the camera is turned on.

ƃ [Battery Type] sub Menu : Alkaline / Ni-MH

SETUP

LCD

Video Out

Quick View

Reset

Battery Type

ƃ Start up image : [Off], [LOGO], [User Image1],

MYCAM

[User Image2]

Start Image

Start Sound

Shutter Sound

Alkaline

Ni-MH

- Use a saved image for the start-up image with the

[User Image] in the [RESIZE] menu in the play

mode.

Back:

ꢂ

Set:OK

Back:ꢂ

Set:OK

- The start-up image will not be deleted by [DELETE]

or [Format] menu.

- The User images will be deleted by [Reset] menu.

ŝ58Ş

Download from Www.Somanuals.com. All Manuals Search And Download.

Start up sound

Important notes

Be sure to observe the following precautions!

ƈ You can select the sound that is activated whenever the camera is turned on.

ƈThis unit contains precision electronic components. Do not use or store this unit

in the following locations.

ƃ Start up sound : [Off], [Sound 1], [Sound 2], [Sound 3]

MYCAM

- If the start up image is set to [Off], the start up sound

Start Image

Start Sound

Shutter Sound

Off

- Areas exposed to severe changes in temperature and humidity.

- Areas exposed to dust and dirt.

will not activate, even though you may have set

these to on.

Sound 1

Sound 2

Sound 3

- Areas exposed to direct sunlight or the inside of a vehicle in hot weather.

- Environments where there is high magnetism or excessive vibration.

- Areas with high explosives or highly flammable materials.

Back:ꢂ

Set:OK

ƈDo not leave this camera in places subject to dust, chemicals (like naphthalene

and mothball), high temperature and high humidity.

Keep this camera with silica gel in a hermetically sealed box when not planning

to use the camera for a long period of time

ƈSand can be particularly troublesome to cameras.

- Do not let sand get inside the camera when using it on beaches, coastal

dunes, or other areas where there is lots of sand.

Shutter sound

ƈ You can select the shutter sound.

- Doing so may result in failure or may permanently render the camera unusable.

ƃ Shutter sound : [Off], [Sound 1], [Sound 2], [Sound 3]

ƈHandling the camera

MYCAM

Start Image

Start Sound

Shutter Sound

- Never drop the camera or subject it to severe shocks or vibrations.

- Protect the large size LCD monitor from an impact. When this camera is not

used, keep it in the camera case.

Off

Sound 1

Sound 2

Sound 3

Back:ꢂ

Set:OK

- Avoid obstructing the lens or the flash when you capture an image.

- This camera is not waterproof.

To avoid dangerous electrical shocks, never hold or operate the camera with

wet hands.

- If you use this camera in wet places, such as beach or pool, do not let water or

sand get inside the camera. Doing so may result in failure or may permanently

damage the unit.

ŝ59Ş

Download from Www.Somanuals.com. All Manuals Search And Download.

Important notes

ƈ Extremes in temperature may cause problems.

ƈ Camera Maintenance

- If the camera is transferred from a cold to a warm and humid environment,

condensation can form on the delicate electronic circuitry. If this occurs, turn

the camera off and wait for at least 1 hour until all moisture is dispersed.

Moisture built up can also occur in the memory card. If this happens, turn off

the camera and remove the memory card. Wait until the moisture has

dispersed.

- Use a soft brush (available from photo stores) to gently clean the lens and LCD

assemblies. If this does not work, lens-cleaning paper with lens cleaning fluid

can be used.

Clean the camera body with a soft cloth. Do not allow this camera to come into

contact with solvent materials such as benzol, insecticide, thinners etc. This

may damage the body shell of the camera and also affect its performance.

Rough handling can damage the LCD monitor. Take care to avoid damage

and keep the camera in its protective carry case at all times when not in use.

ƈ Caution on Using the Lens

- If the lens is subjected to direct sunlight, it could result in discoloration and

deterioration of the image sensor.

ƈ Do not attempt to disassemble or modify the camera.

- Pay attention not to get fingerprints or foreign substances on the surface of the

lens.

ƈ Under certain conditions, static electricity can cause the flash unit to fire. This is

- When the lens cover opens, the outer lens that you can see is for auto focus.

When using or cleaning this camera, handle the outer lens with care.

not harmful to the camera and is not a malfunction.

ƈ When images are uploaded or downloaded, the data transfer may be affected by

ƈ If the digital camera is not used for a long period, an electric discharge can

occur.

It is a good idea to remove the battery and the memory card if you do not intend

using the camera for an extended period of time.

static electricity.

In this case, disconnect and re-connect the USB cable before trying the transfer

again.

ƈ Before an important event or going on a trip, you should check the camera

condition.

ƈ If the camera is exposed to an electronic interference, it will turn itself off to

protect the memory card.

- Take a picture for testing the camera condition and prepare extra battery.

- Samsung cannot be held responsible for camera malfunctions.

ŝ60Ş

Download from Www.Somanuals.com. All Manuals Search And Download.

Warning indicator

Low Battery!

ƈThere are several warnings that may appear on the LCD display

ҮThere is low battery capacity

ƍ Insert fresh batteries.

Card Error!

ҮMemory card error

ƍ Turn off the camera power and turn it on again

ƍ Insert the memory card again

ƍ Insert the memory card and format the memory card. (p.55)

Low Light!

ҮWhen taking pictures in dark places

ƍ Take pictures in Flash Photography mode.

Card Locked!

ҮThe memory card is locked

ƍ SD memory card : Slide the write protect switch to the top of the memory card

Out Of Number

ҮWhen selecting too many printing pages in the PictBridge menu.

ƍ Select printing page within the limitation.

Memory Full!

ҮThere is insufficient memory capacity to take an image

ƍ Insert a new memory card

ƍ Delete unnecessary image files to free up some memory

No Image!

Before contacting a service centre

ҮThere are no images stored on the memory

ƍ Take images

ƍ Insert a memory card that is holding some images

ƈ Please check the following

The camera doesn’t switch on

ҮThere is low battery capacity

ƍ Insert fresh batteries. (p.9)

File Error!

ҮFile error

ҮThe battery may be inserted incorrectly.

ƍ Insert the battery according to the polarity marks (+, -)

ҮThe battery is not inserted

ƍ Delete the erroneous files.

ҮMemory card error

ƍ Contact a camera service centre

ƍ Insert the battery and turn on the camera

ŝ61Ş

Download from Www.Somanuals.com. All Manuals Search And Download.

Before contacting a service centre

Camera does not take images when pressing the Shutter button

ҮThere is insufficient memory capacity

ƍ Delete unnecessary image files

The flash does not fire

ҮFlash off mode has been selected

ƍ Dis-engage flash off mode

ҮThe memory card has not been formatted

ƍ Format the memory card (p.55)

ҮThe camera mode can’t use the flash

ƍ Refer to the FLASH instruction (p.21)

ҮThe memory card is exhausted

ƍ Insert a new memory card

Incorrect date and time is displayed

ҮThe memory card is locked

ƍ Refer to [Card Locked!] error message

ҮThe camera’s power is off

ҮThe date and time have been set incorrectly or the camera has adopted the

default settings

ƍ Reset the date and time correctly

ƍ Turn the camera power on

ҮThe battery is exhausted

ƍ Insert fresh batteries.

The camera buttons do not operate

ҮCamera malfunction

ҮBattery is inserted incorrectly with the polarities reversed

ƍ Insert the battery according to the polarity marks (+, -)

ƍ Remove /re-insert battery and switch the camera on

A card error has occurred while the memory card is in the camera.

ҮIncorrect memory card format

ƍ Re-format the memory card

The camera suddenly stops working while in use

ҮThe camera stopped due to a malfunction

ƍ Remove /re-insert battery and switch the camera on

The images don't play back

The images are unclear

ҮIncorrect file name (Violation of DCF format)

ƍ Do not change the image file name

ҮA picture was taken without setting an appropriate macro mode

ƍ Select an appropriate macro mode to take a clear image.

ҮThe picture was taken with the subject beyond the flash range

ƍ Take a picture within the flash range

ҮThe lens is smudged or dirty

Colour of image is different to the original scene

ҮWhite balance or effect setting is incorrect

ƍ Select appropriate White balance and effect

ƍ Clean the lens

Images are too bright

ҮExposure is excessive

ƍ Reset exposure compensation

ŝ62Ş

Download from Www.Somanuals.com. All Manuals Search And Download.

Before contacting a service centre

Specifications

No image on external monitor

ƈ Image Sensor

ҮThe external monitor has not been connected properly with the camera

ƍ Check the connection cables

ҮThere are incorrect files in the memory card

ƍ Insert a memory card that has correct files

- Type : 1/2.5" CCD

- Effective Pixel : Approx. 5.0 Mega-pixel

- Total Pixel : Approx. 5.1 Mega-pixel

ƈ Lens

Focal Length : SHD Lens f = 5.8 ~ 17.4mm (35mm film equivalent : 35 ~ 105mm)

When using the PC’s explorer, the [Removable Disk] file does not show

ҮCable connection is incorrect

ƍ Check the connection

ҮThe camera is off

ƍ Turn the camera on

- F No. : F2.8 ~ F7.1 (Wide), F4.9 ~ F12.4 (Tele)

- Digital Zoom :ŋStill Image mode : 1.0X ~ 5.0X

ŋPlay mode : 1.0X ~ 10.0X (depends on image size)

ƈ LCD Monitor : 2.4" color TFT LCD (112,000 dots)

ҮThe operating system is not Windows 98, 98SE, 2000, ME, XP/ Mac OS 9.2 ~

10.3. Alternatively the PC does not support USB.

ƍ Install Windows 98, 98SE, 2000, ME, XP/ Mac OS 9.2 ~ 10.3 to PC that

supports USB.

ҮThe camera driver is not installed

ƍ Install a [USB Storage Driver]

ƈ Focusing

- Type : TTL auto focus

- Range : ŋNormal : 80cm ~ infinity

ŋMacro : 5cm ~ 80cm (Wide), 40cm ~ 80cm (Tele)

ŋAuto Macro : 5cm ~ Infinity (Wide), 40cm ~ Infinity (Tele)

ƈ Shutter

- Type : Mechanical and Electronic shutter

- Speed : 1 ~ 1/1,500 sec. (Manual : 8 ~ 1/1,500 sec.)

ƈ Exposure

- Control : ŋProgram AE

ŋMetering : Multi, Spot

- Compensation : 2EV (0.5EV steps)

- ISO Equivalent : Auto, 50,100, 200, 400

ƈ Flash

- Modes : Auto, Auto & Red-eye reduction, Fill-in flash, Slow sync, Flash off

- Range : Wide : 0.2m ~ 3.0m, Tele : 0.4m ~ 2.5m (ISO AUTO)

- Recharging Time : Approx. 6 sec.

ƈ Sharpness : Soft, Normal, Vivid

ŝ63Ş

Download from Www.Somanuals.com. All Manuals Search And Download.

Specifications

- Capacity (20 MB)

ƈ Effect : Normal, B&W, Sepia, Red, Blue, Green, Negative, RGB

VGA

115

127

ƈ White Balance : Auto, Daylight, Cloudy, Fluorescent_H, Fluorescent_L,

Super Fine

Fine

Tungsten, Custom

ƈ Voice Recording : Voice Recording (max.1 hour),

158

Normal

Voice Memo in Still Image (max. 10 sec.)

* These figures are measured under SamsungŖs standard conditions and may

vary depending on shooting conditions and camera settings

ƈ Date Imprinting : Date, Date&Time, Off (user selectable)

ƈ Image Play

ƈ Shooting

- Type : Single image, Thumbnails, Slide show, Movie Clip

- Editing : Trimming, Resizing, Rotate, Effect

- Still Image: ŋAuto, Program, Manual, Portrait, Night, Children, Scene

Scene : Landscape, Close-up, Sunset, Dawn, Backlight,

Fireworks, Beach&Snow

ƈ Interface

ŋShooting : Single, Continuous, AEB

ŋSelf-timer : 10 sec., 2 sec., Double (10 sec., 2 sec.)

- Movie Clip :ŋWith Audio or without Audio

- Digital output connector : USB 2.0 Full Speed

- Video output : NTSC, PAL (user selectable)

- Audio : Mono

ƈ Power Source

- Primary Battery : 2 x AA Alkaline (High Capacity)

- Rechargeable battery (Optional) : SNB-2512 (Ni-MH)

(user selectable, recording time : memory capacity dependent)

ŋSize : 640x480, 320x240, 160x120

(3X Optical Zoom, Mute during Zoom Operation)

ŋFrame rate : 30 fps, 15 fps

ŋMovie Editing (Embedded) : Pause during recording,

Still Image Capture

ſ Included battery may vary depending on sales region.

ƈ Dimensions (WxHxD) : 97.9 X 61.8 X 26.4mm

(excluding the projecting parts of the camera)

ƈ Storage

ƈ Weight : Approx. 133g (without batteries and card)

ƈ Operating Temperature : 0 ~ 40ŭC

ƈ Operating Humidity : 5 ~ 85%

ƈ Software

- Media :ŋInternal memory : Approx.20MB flash memory

ŋExternal memory : MMC / SD card (Up to 1GB Guaranteed)

- File Format :ŋStill Image : JPEG (DCF), EXIF 2.2, DPOF 1.1, PictBridge 1.0

ŋMovie Clip : AVI (MJPEG)

ŋAudio : WAV

Camera Driver : Storage Driver (Windows98/98SE/2000/ME/XP, Mac OS 9.2 ~ 10.3)

- Image Size

- Application : Digimax Master, Adobe Reader

VGA

ƈ Special Features : User-friendlyŗEffect” button, Easy Grip, 2.4” Large LCD

ſ Specifications are subject to change without prior notice.

2560x1920 2272x1704 2048x1536 1600x1200 1024x768

640x480

ſ All trademarks are the property of their respective owners.

ŝ64Ş

Download from Www.Somanuals.com. All Manuals Search And Download.

Software Notes

About the software

Please ensure that you read the instruction manual carefully before use.

ҮThe attached software is a camera driver and image editing software tool for

Windows.

ҮUnder no circumstances should all or part of either the software or the user

manual be reproduced.

After inserting the CD-ROM provided with this camera into the CD-ROM drive, the

following window should automatically run.

Before connecting the camera to the PC, you

should first install the camera driver.

ҮCopyrights for software are licensed only for use with a camera.

ҮIn the unlikely event of a manufacturing fault, we will repair or exchange your

camera.

We cannot, however, be held responsible in any way for damage caused by

inappropriate use.

ҮUsing a Hand-made PC or a PC and OS that has not been guaranteed by the

manufacturer is not covered by the Samsung warranty.

ҮBefore reading this manual, you should have a basic knowledge of computers

and O/S (Operating Systems).

ƈ Camera driver : This enables images to transfer between the camera

and PC.

This camera uses the USB Storage Driver as the camera driver. You can use

the camera as a USB card reader. After installing the driver and connecting this

camera to the PC, you can find [Removable Disk] in [Windows Explorer] or [My

computer]. A USB Storage Driver is provided only for Windows. A USB Driver

for MAC is not included with the Application CD. You can use the camera with

Mac OS 9.2 ~ 10.3.

System Requirements

For Windows

For Macintosh

PC with processor better than Pentium II 450MHz

(Pentium 700MHz recommended)

Power Mac G3 or later

ƈ Digimax Master : This is the all-in-one multi media software solution.

You can download, view, edit and save your digital images and movie clips with

this software. This software is only compatible with Windows.

Windows 98 / 98SE / 2000 / ME / XP

5QVQU]Uꢀꢁꢂ5*ꢀ:)5

200MB of available hard disk space

USB port

Mac OS 9.2 ~ 10.3

5QVQU]Uꢀꢁꢂ5*ꢀ:)5ꢀ

110MB of available hard-disk space

USB port

CD-ROM drive

1024x768 pixels, 16bit color display

compatible monitor

(24bit color display recommended)

ŝ65Ş

Download from Www.Somanuals.com. All Manuals Search And Download.

About the software

Setting up the application software

ƈ To use this camera with a PC, install the application software first.

After this has been done, the stored images in the camera can be moved to the

PC and can be edited by an image editing program.

INFORMATION

ƃ Be sure to check the system requirements before installing the driver.

ƃ You should allow 5 ~ 10 seconds for running the automatic setup program

according to the capability of your computer. If the frame does not show, run

the [Windows Explorer] and select [Samsung.exe] in the CD-ROM Drive

root directory.

ƃ PDF documents of user manual are included in the Software CD-ROM

supplied with this camera. Search the PDF files with Window's explorer.

Before opening the PDF files, you must install the Adobe Reader included in

the Software CD-ROM.

ƈ You can visit the Samsung web-site through the internet.

http://www.samsungcamera.com : English

http://www.samsungcamera.co.kr : Korean

1. The auto run frame will display. Click the

[Install] menu in the Auto run frame.

ƃ To install the Adobe Reader 6.0.1 correctly, Internet Explorer 5.01 or later

had to be installed. Visit "www.microsoft.com" and upgrade the Internet

Explorer.

2. Install the USB Driver, DirectX, Digimax Master and Adobe Reader by

selecting a button shown on the monitor.

ŝ66Ş

Download from Www.Somanuals.com. All Manuals Search And Download.

Setting up the application software

3. After restarting the computer, connect the PC to the camera with the USB

cable.

4. Turn the camera power on.

The [Found New Hardware Wizard] will

open and the computer will recognize the

camera.

ſ If your OS is Windows XP, an image

viewer program will open.

If the download window of Digmax Master

opens after starting Digimax Master, the

camera driver was setup successfully.

INFORMATION

ƃ If you have installed the camera driver, The [Found New Hardware Wizard]

may not open.

ƃ On a Windows 98 or 98 SE system, the Found New Hardware Wizard

dialog box opens and a window asking you to select a driver file may

appear. In this case, specify "USB Driver" in the CD supplied. (for Windows

98 and 98 SE).

ŝ67Ş

Download from Www.Somanuals.com. All Manuals Search And Download.

Starting PC mode

ҮIf you connect the USB cable to a USB port on your PC and then turn on the

power, the camera will automatically switch to "computer connection mode".

ҮIn this mode, you can download stored images to your PC through the USB

cable.

ƈ Connecting the camera to a PC

ҮThe LCD monitor is always turned off in PC mode.

ƈ Connecting the camera to a PC

1. In any mode with the exception of Voice

Recording mode, press the Menu button.

SETUP

Format

2. Press the LEFT/ RIGHT button and select the

[SETUP] menu tab.

Date&time

Imprint

Sound

USB

Computer

Printer

3. Select the [USB] menu by pressing the UP/

DOWN button and press the RIGHT button.

4. Use the UP and DOWN buttons to select

[Computer], and then press the OK button.

5. Press the menu button twice and the menu will

disappear.

Back:ꢀ

Set:OK

6. Connect the PC to the camera with the USB cable.

ſIf you selected [Printer] in Step 4, when you connect the camera to your

printer, the [Connecting Printer] message will display and the connection will

not be established.

In this case, disconnect the USB cable, and then follow the procedure from

Step 2 and onward.

ƈ Disconnecting the camera and PC : Refer to page 70

(Removing the removable disk).

ŝ68Ş

Download from Www.Somanuals.com. All Manuals Search And Download.

Starting PC mode

6. Press the right mouse button and a pop-up

menu will open. Click [Paste].

ƈ Downloading stored images

You can download the still images stored on the camera to your PC's hard disk

and print them or use a photo editing software to edit them.

1. Connect the camera to your PC with the USB cable.

2. On your computer's desktop display, select

[My computer] and double click [Removable

Disk ƍ DCIM ƍ 100SSCAM].

7. An image file is transferred from the camera

to your PC.

The image files will then be displayed.

3. Select an image and press the right

mouse button.

- By using [Digimax Master], you can see the stored images in the memory

directly on the PC monitor and you can copy or move the image files.

4. A pop-up menu will open.

Click the [Cut] or [Copy] menu.

- [Cut] : cuts a selected file.

- [Copy] : copies files.

CAUTION

ƃ We recommend that you should copy the images to the PC to view them.

Opening images directly from the removable disk may be subject to

unexpected disconnection.

ƃ When you upload a file that is not taken by this camera to the Removable

Disk, the [File Error!] message will be displayed on the LCD monitor in the

PLAY mode, and nothing is displayed in THUMBNAIL mode.

5. Click a folder where you want to paste the file.

ŝ69Ş

Download from Www.Somanuals.com. All Manuals Search And Download.

Removing the removable disk

5. A [Safe to Remove Hardware] window will

open. Click the [OK] button.

ƈ Windows 98SE

1. Check whether the camera and PC are transferring a file.

If the camera status lamp blinks, please wait until the lamp has finished

blinking and is constantly on.

6. A [Unplug or Eject Hardware] window will

open. Click the [Close] button and the

removable disk will be removed safely.

2. Unplug the USB cable.

ƈ Windows 2000/ME/XP

(The illustrations may differ from those shown depending on the Windows O/S.)

1. Check whether the camera and PC are transferring a file.

If the camera status lamp blinks, please wait until the lamp has finished

blinking and is constantly on.

7. Unplug the USB cable.

2. Double-click the [Unplug or Eject Hardware]

icon on the task bar.

[Double-click!]

3. The [Unplug or Eject Hardware] window will

open. Select the [USB Mass Storage Device]

and click the [Stop] button.

4. The [Stop a Hardware device] window will

open. Select the [USB Mass Storage Device]

and click the [OK] button.

ŝ70Ş

Download from Www.Somanuals.com. All Manuals Search And Download.

Digimax Master

Setting up the USB Driver for MAC

1. A USB Driver for MAC is not included with the software CD as MAC OS

supports the camera driver.

2. Check the MAC OS version during start-up.

ƈ You can download, view, edit and save your images and movies with this

software. This software is only compatible with Windows except for

the Windows 98.

This camera is compatible with MAC OS 9.2 ~ 10.3.

3. Connect the camera to the Macintosh and turn the camera power on.

4. A new icon will be displayed on the desktop after connecting the camera to

the MAC.

ƈ To start the program, click [Start ƍ Programs ƍ Samsung ƍ Digimax Master].

ƃ Downloading images

1. Connect the camera to your PC.

2. A window for downloading images will

display after connecting the camera to

your PC.

- To download the captured images, select

the [Select All] button.

- Select desired folder in the window and

click the [Select All] button. You can save

captured images and selected folder.

- If you click the [Cancel] button,

downloading will be cancelled.

Using the USB Driver for MAC

1. Double click a new icon on the desktop and the folder in the memory will be

displayed.

2. Select an image file and copy or move it to MAC.

CAUTION

ƃ For Mac OS 10.0 or later : First complete uploading from computer to

camera and then remove the removable disk

with the Extract command.

3. Click [Next >] button.

ŝ71Ş

Download from Www.Somanuals.com. All Manuals Search And Download.

Digimax Master

4. Select a destination and make a folder to

save downloaded images and folders.

- Folder names can be made in order of

date and images will be downloaded.

- Folder name will be made as you want

and images will be downloaded.

ƃ Image viewer : You can view the stored images.

- After selecting a folder that was made

before, images will be downloaded.

5. Click [Next >] button.

6. A window will open as shown alongside.

The destination of the selected folder will

be displayed on the upper side of the

window.

Click the [Start] button to download the

images.

- Image viewer functions are listed below.

Menu bar : You can select menus.

File, Edit, View, Tools, Change functions, Auto download, help, etc.

Image selection window : You can select the desired images in this window.

Media type selection menu : You can select image viewer, image edit and

movie edit functions in this menu.

Preview window : You can preview an image or a movie clip and check the

multi media information.

7. Downloaded images will be displayed.

Zoom bar : You can change preview size.

Folder display window : You can see the folder location of the selected

image.

Image display window : Images of the selected folder are displayed.

ſ Refer to the [Help] menu in Digimax Master for further information.

ŝ72Ş

Download from Www.Somanuals.com. All Manuals Search And Download.

Digimax Master

ƃ Image edit : You can edit the still image.

ƃ Movie edit : You can get the still image, movie clip, narration, music files together

in a movie clip.

- Image edit functions are listed below.

- Movie clip edit functions are listed below.

Edit menu : You can select the following menus.

[Add Media] : You can add other media elements to a movie.

[Edit Clip] : You can change the brightness, contrast, colour and saturation.

Edit menu : You can select the following menus.

[Tools] : You can resize or crop the selected image. See the [Help] menu.

[Adjust] : You can modify image quality. See the [Help] menu.

[Retouch] : You can change image or insert effects on the image. See the

[Help] menu.

Drawing tools : Tools for editing an image.

Image display window : A selected image displays in this window.

Preview window : You can preview the changed image.

[Effects]

[Set Text] : You can insert texts.

[Narrate] : You can insert a narration.

: You can insert an effect.

[Produce] : You can save the edited multi media as a new file name.

You can select AVI, Windows media (wmv), Windows media

(asf) and movie clip for this camera (avi, MPEG-4) file types.

Frame display window : You can insert multi media in this window.

ſ A still image edited with Digimax Master can’t be played back on the camera.

ſ Refer to the [Help] menu in Digimax Master for further information.

ſ Some movie clips that were compressed with a codec that is not compatible with

the Digimax Master can’t play back in the Digimax Master.

ſ Refer to the [Help] menu in Digimax Master for further information.

ŝ73Ş

Download from Www.Somanuals.com. All Manuals Search And Download.

FAQ

ƈ Please check the following if the USB connection malfunctions.

Case 6

When I open the Device Manager (by clicking Start ƍ (Settings) ƍ

Control Panel ƍ (Performance and Maintenance) ƍ System ƍ

(Hardware) ƍ Device Manager), there are Unknown Devices or Other

Devices entries with a yellow question mark(?) beside them or devices

with an exclamation mark(!) beside them.

Case 1

USB cable is not connected or it is not the supplied USB cable.

ƍ Connect the supplied USB cable.

ƍ Right-click on the entry with the question (?) or exclamation (!) mark

and select "Remove". Restart the PC and connect the camera again.

For Windows 98 PC, remove the camera driver also, restart the PC,

and then reinstall the camera driver.

Case 2

The camera is not recognised by your PC.

Sometimes, the camera may appear under [Unknown Devices] in

Device Manager.

ƍ Install the camera driver correctly.

Turn off the camera, remove the USB cable, plug in the USB cable

again, and then turn on the camera.

Case 7

Case 8

In some security programs (Norton Anti Virus, V3, etc.), the computer

may not recognise the camera as a removable disk.

ƍ Stop the security programs and connect the camera to the computer.

Refer to the security program instructions about how to temporarily

disable the program.

Case 3

Case 4

There is an unexpected error during file transfer.

ƍ Turn the camera power off and on again. Transfer the file again.

The camera is connected to the USB port located on the front of the

computer.

When using the USB hub.

ƍ When the camera is connected to the USB port located on the front of

the computer, the computer may not recognise the camera.

Connect the camera to the USB port located on the back of the

computer.

ƍ There may be a problem in connecting the camera to the PC through

the USB hub if the PC and the hub are not compatible. Wherever

possible, connect the camera to the PC directly.

Case 5

Are other USB cables connected to the PC?

ƈ When the movie clip doesn’t play back on the PC

ƍ The camera may malfunction when it is connected to the PC at the

same time as another USB cable. In this case, disconnect the other

USB cable, and connect only one USB cable to the camera.

ſ When the movie clip recorded by the camera doesn’t play back on the PC,

the causes are mostly due to the codec installed on the PC.

ŝ74Ş

Download from Www.Somanuals.com. All Manuals Search And Download.

FAQ

Correct Disposal of This Product

Correct Disposal of This Product (Waste Electrical & Electronic

Equipment)

ƃ When the DirectX 9.0 or later is not installed

ƍ Install the DirectX 9.0 or later

(Applicable in the European Union and other European countries with

separate collection systems) This marking shown on the product or its

literature, indicates that it should not be disposed with other household

1) Insert the CD provided with the camera

2) Run the windows explorer and select the [CD-ROM drive:\ USB

Driver\DirectX 9.0] folder and click the DXSETUP.exe file.The DirectX will be

installed. Visit the following site for downloading the

DirectX.http://www.microsoft.com/directx

wastes at the end of its working life.

To prevent possible harm to the environment or human health from uncontrolled

waste disposal, please separate this from other types of wastes and recycle it

responsibly to promote the sustainable reuse of material resources. Household

users should contact either the retailer where they purchased this product, or their

local government office, for details of where and how they can take this item for

environmentally safe recycling. Business users should contact their supplier and

check the terms and conditions of the purchase contract.

ƃ If a PC (Windows 98) stops responding while the camera and PC are connected

repeatedly

ƍ If a PC (Windows 98) is turned on for a long time and the camera is

connected repeatedly, the PC may not recognise the camera. In this case, re-

start the PC.

This product should not be mixed with other commercial wastes for disposal.

ƃ If a PC connected with the camera stops responding while Windows is starting.

ƍ In this case, disconnect the PC and the camera and Windows will start.

If the problem happens continuously, set the Legacy USB Support to disable

and re-start the PC. The Legacy USB Support is in the BIOS setup menu.

(The BIOS setup menu differs from the PC manufacturers and some BIOS

menus don’t have Legacy USB Support) If you can’t change the menu by

yourself, contact to the PC manufacturer or BIOS manufacturer.

ƃ If the movie clip can’t be deleted, removable disk can’t be extracted or an error

message displays during the file transfer.

ƍ If you install only the Digimax Master, the problems mentioned above

occasionally happen.

- Close the Digimax Master program by clicking the Digimax Master icon on

the Taskbar.

- Install all the application programs included in the software CD.

(You must install the Movie clip codec)

Samsung Techwin cares for the environment at all product

manufacturing stages to preserve the environment, and is

taking a number of steps to provide customers with more

environment-friendly products. The Eco mark represents

Samsung TechwinŖs will to create environment-friendly

products, and indicates that the product satisfies the EU

RoHS Directive.

ŝ75Ş

Download from Www.Somanuals.com. All Manuals Search And Download.

FCC notice

MEMO

ƈ NOTE:

This equipment has been tested and found to comply with the limits for a

Class B digital device, pursuant to part 15 of the FCC Rules. These limits are

designed to pro-vide reasonable protection against harmful interference in a

residential installation.

This equipment generates, uses and can radiate radio frequency energy and,

if not in-stalled and used in accordance with the instructions, may cause

harmful interference to radio communications. However, there is no guarantee

that interference will not occur in a particular installation. If this equipment does

cause harmful interference to radio or television reception, which can be

determined by turning the equipment off and on, the user is encouraged to try

to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help.

ƈ CAUTION :

Changes or modifications not expressly approved by the manufacturer

responsible for compliance could void the user’s authority to operate the

equipment.

ƈ Declaration of Conformity

Trade Name

Model No.

: SAMSUNG TECHWIN

: Digimax D53

Responsible Party : Samsung Opto-Electronics America, INC.

Address

Telephone No.

: 40 Seaview Dr. Secaucus,NJ 07094

: 201-902-0347

This device complies with Part 15 of the FCC Rules. Operation is subject to

the following two conditions: (1) This device may not cause harmful

interference, and (2) this device must accept any interference received,

including interference that may cause undesired operation.

ŝ76Ş

Download from Www.Somanuals.com. All Manuals Search And Download.

SAMSUNG TECHWIN CO., LTD.

SAMSUNG OPTO-ELECTRONICS FRANCE S.A.S.

SAMSUNG OPTO-ELECTRONICS UK LIMITED

OPTICS & DIGITAL IMAGING DIVISION

145-3, SANGDAEWON 1-DONG, JUNGWONGU,

SUNGNAM-CITY, KYUNGKI-DO, KOREA

462-121

TOUR MAINE MONTPARNASSE

33, AVENUE DE MARINE

75755, PARIS CEDEX 15, FRANCE

TEL : +33 (0)1 4279 2200

SAMSUNG HOUSE 1000 HILLSWOOD DRIVE

HILLSWOOD BUSINESS PARK

CHERTSEY KT16 OPS U.K.

TEL : 00800 12263727

(

)

TEL : 82 31-740-8086, 8088, 8090, 8092, 8099

FAX : +33 (0)1 4320 4510

(free for calls from UK only)

(

)

FAX : 82 31-740-8398

www.samsungphoto.fr

UK Service Hotline : 01932455320

www.samsungcamera.co.uk

www.samsungcamera.com

SAMSUNG OPTO-ELECTRONICS GMBH

SAMSUNG OPTO-ELECTRONICS AMERICA, INC.

RUSSIA INFORMATION CENTER

SAMSUNG ELECTRONICS

AM KRONBERGER HANG 6

HEADQUARTERS

D-65824 SCHWALBACH/TS., GERMANY

( )

TEL : 49 0 6196 66 53 03

40 SEAVIEW DRIVE, SECAUCUS,

NJ07094, U.S.A.

117545 ST. DOROZHNAYA BUILDING 3,

( )

FAX : 49 0 6196 66 53 66

KORPUS 6, ENTRANCE 2, MOSCOW, RUSSIA

( )

TEL : 1 201-902-0347

( )

TEL : 7 095-363-1700

www.samsungcamera.de

( )

FAX : 1 201-902-9342

CALL FREE : 8 800 200 0 400 (from Russia only)

WESTERN REGIONAL OFFICE

18600 BROADWICK ST.,

TIANJIN SAMSUNG OPTO-ELECTRONICS CO.,LTD.

www.samsungcamera.ru

7 PINGCHANG ROAD NANKAI DIST., TIANJIN

P.R CHINA POST CODE : 300190

RANCHO DOMINGUEZ, CA 90220, U.S.A.

( )

TEL : 1 310-900-5263/5264

(

)

TEL : 86 22-2761-4599

( )

FAX : 1 310-537-1566

(

)

FAX : 86 22-2769-7558

www.samsungcamerausa.com

www.samsungcamera.com.cn

Internet address - http : //www.samsungcamera.com

The CE Mark is a Directive conformity

mark of the European Community (EC)

Download from Www.Somanuals.com. All Manuals Search And Download.

Radio Shack Telephone System 350 User Guide
Roberts Radio Clock Radio CR9922 User Guide
Roland Music Mixer SP 555 User Guide
Rotel Stereo Amplifier RMB 1085 User Guide
Samson Headphones SWC99BGT K; SWC99BGT I User Guide
Samsung All in One Printer SGH X640 User Guide
Samsung Flat Panel Television 400MX User Guide
Sceptre Technologies Flat Panel Television E325 User Guide
Sears Saw 43783163 User Guide
Sennheiser Headphones HD 565 User Guide