DVD-VCR
DVD-VIDEOMAGNÓ
GB
SV-DVD540
HU
Instruction Manual
Használati útmutató
STANDBY/ON
O
P
E
N
/
C
L
O
S
E
AUX
OK
PAL
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Contents
◆ RECORDING TELEVISION BROADCASTS
◆ FOREWORD
◆
◆
◆
◆
◆
◆
◆
◆
◆
Selecting the Recording Speed................................................................................................ 29
◆
Safety Instructions................................................................................................................
Disc Type and Characteristics .............................................................................................
5
6
Protecting a Recorded Cassette .............................................................................................. 30
Recording a Programme Immediately...................................................................................... 30
Recording a Programme with Automatic Stop ......................................................................... 31
Using the ShowView Feature................................................................................................... 32
Modifying ShowView Programming ......................................................................................... 33
Using the Timer Programming Feature.................................................................................... 34
Checking a Preset Recording .................................................................................................. 35
Cancelling a Preset Recording................................................................................................ 35
◆
◆ DVD-VCR OVERVIEWS
GB
GB
◆
◆
◆
◆
◆
Front View of the DVD-VCR.................................................................................................
7
7
8
9
9
Rear View of the DVD-VCR .................................................................................................
Infrared Remote Control.......................................................................................................
Display Indicators.................................................................................................................
Accessories..........................................................................................................................
◆ PLAYING BACK
◆ CONNECTING YOUR DVD-VCR
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
Playing a Cassette ................................................................................................................... 36
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
Deciding How to Connect DVD-VCR ...................................................................................
10
11
11
12
13
14
15
16
17
17
18
Adjusting Picture Alignment Manually...................................................................................... 36
Selecting the Audio Output Mode ............................................................................................ 37
Playing a Cassette in Slow Motion........................................................................................... 37
Playing a Sequence Frame by Frame...................................................................................... 38
Playing a Sequence at Variable Speeds.................................................................................. 38
Searching for a Specific Sequence.......................................................................................... 39
Using the Tape Counter........................................................................................................... 41
Connecting an RCA Audio/Video Input Cable.......................................................................... 42
Using the Assemble Edit Function ........................................................................................... 43
Recording from Another VCR or Camcorder ........................................................................... 43
Using the TV Buttons on the Remote Control.......................................................................... 44
Connecting DVD-VCR to the TV using the Coaxial Cable...................................................
Connecting DVD-VCR to the TV using the SCART Cable...................................................
Connecting DVD-VCR to a Satellite Receiver or Other Equipment .....................................
Plug & Auto Set Up ..............................................................................................................
Tuning Your Television for the DVD-VCR............................................................................
Deck Control Keys ...............................................................................................................
Basic TV Tuner Operations..................................................................................................
Inserting Batteries in the Remote Control ............................................................................
Setting the Date and Time ...................................................................................................
Menu Language ...................................................................................................................
◆ DVD FUNCTIONS
Choosing a Connection............................................................................................................ 45
◆ SETTING UP YOUR DVD-VCR
Presetting the Stations Automatically...................................................................................
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
19
20
21
22
23
23
24
24
25
25
26
26
27
27
28
28
Setting Up the Language Features................................................................................................ 46
Setting Up the Audio Options........................................................................................................ 48
Setting Up the Display Options ..................................................................................................... 49
Setting Up the Parental Control .................................................................................................... 50
A/V Receiver Connections ........................................................................................................... 51
Special Playback Features........................................................................................................... 52
Adjusting the Aspect Ratio (EZ View) ............................................................................................ 53
Using the Display Function........................................................................................................... 55
Changing the Camera Angle ........................................................................................................ 56
Selecting the Subtitle Language.................................................................................................... 56
Presetting the Stations Manually..........................................................................................
Clearing a Preset Station .....................................................................................................
Changing the Preset Station Table ......................................................................................
Selecting the RF OUT Sound Mode (B/G-D/K) ...........................................................................
Setting the DVD-VCR Output Channel ................................................................................
Selecting the Colour Mode...................................................................................................
NICAM..................................................................................................................................
Intelligent Picture Control.....................................................................................................
Intelligent Picture Control (Remote Control) ........................................................................
ShowView Extend ................................................................................................................
Auto Power off......................................................................................................................
Screen Messages ................................................................................................................
Selecting the Cassette Type ................................................................................................
Repeat Play..........................................................................................................................
S-VHS Play ..........................................................................................................................
................................................................................................................................ 57
Repeat Play
Selecting the Audio Language ...................................................................................................... 58
Using the Mark Function .............................................................................................................. 59
MP3/WMA Play........................................................................................................................... 60
Program Play & Random Play ...................................................................................................... 62
Picture CD Playback.................................................................................................................... 63
2
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents (cont.)
Safety Instructions
The following illustrations represent precautions.
◆ SOLVING PROBLEMS
◆
◆
◆
Technical Specifications...................................................................................................... 65
Problems and Solutions (VCR)............................................................................................ 66
Troubleshooting Guide (DVD) ............................................................................................. 67
GB
GB
The lightning bolt is a warning sign alerting you to dangerous voltage inside the product.
DO NOT OPEN THE DVD-VCR. Refer to service personnel.
This manuel is divided into two sections:
one describing the VCR; the other, the DVD.
10%
75%
40°C
Prior to undertaking anything, please verify in which section you actually are by
H
H
VCR
DVD
5°C
checking either the
or
symbols or the header of the chapter.
This product incorporates copyright protection technology that is protected by
method claims of certain U.S. patents and other intellectual property rights owned
by Macrovision Corporation and other rights owners. Use of this copyright
protection technology must by authorized by Macrovision Corporized by
Macrovision Corporation, and is intended for home and other limited viewing uses
only unless otherwise authorized by Macrovision Corporation. Reverse
engineering or disassembly is prohibited.
Do NOT expose the DVD-VCR
to extreme temperature condi-
tions (below 5°C and above
40°C) or to extreme humidity
conditions (less than 10% and
more than 75%).
Do NOT expose the DVD-VCR
to direct sunlight.
Do NOT expose the DVD-VCR
to any liquids.
Do NOT place any objects on
the DVD-VCR or remote
control.
During a storm and/or light-
ning, unplug the DVD-VCR
from the mains socket and
aerial.
If the remote control is not
used for a long period of time,
remove the batteries and store
it in a cool, dry place.
Symbols
◆
◆
1
1
Press/push
Hold down
Important
Note
THIS DEVICE IS NOT FOR USE IN INDUSTRIAL
ENVIRONMENTS
1
= Step number
4
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Disc Type and Characteristics
Front View of the DVD-VCR
STANDBY/ON BUTTON
DVD DECK
OPEN/CLOSE
BUTTON
VIDEO CASSETTE COMPARTMENT
EJECT BUTTON
This DVD player is capable of playing the following types of discs with the corresponding logos :
VCR SELECT BUTTON
DVD SELECT BUTTON
REW /SKIP BACK
BUTTON
RECORD
BUTTON
Max.
Playing
Time
Disc Types
(Logos)
Recording
Types
Disc Size
GB
GB
Characteristics
Single-sided
240 min.
Double-sided
480 min.
DVD
• DVD contains excellent sound
and video due to Dolby Digital
and MPEG-2 system.
12 Cm
AUX
Audio
+
Video
• Various screen and audio
functions can be easily selected
through the on-screen menu.
Single-sided
80 min.
Double-sided
160 min.
8 Cm
EZ VIEW BUTTON
F.F / SKIP NEXT BUTTON
STOP BUTTON
AUX VIDEO INPUT JACK
• An LP is recorded as an analog
signal with more distortion. CD
is recorded as a Digital Signal
with better audio quality, less
distortion and less deterioration
of audio quality over time.
AUDIO-CD
PROGRAMME SELECTION
BUTTON
74 min.
20 min.
12 Cm
8 Cm
AUX AUDIO L, R INPUT JACK
PLAY/STILL BUTTON
Audio
* DO NOT play CD-ROM, CD-I and DVD-ROM in this player!
(CDGs play audio only, not graphics.)
* It may not be to play CD-R,CD-RW and DVD-R in all cases due to the type of disc or condition of the recording.
Rear View of the DVD-VCR
AV2 (DEC./EXT.) SCART
AUDIO L, R OUT SOCKETS
(EURO-21) SOCKET
Disc Markings
AERIAL IN
CONNECTOR
AUDIO L, R OUT SOCKETS
(DVD ONLY)
DIGITAL
SOUND
~
STEREO
PAL
NTSC
• Playback
Region
Number
• PAL colour
system in U.K,
France, Germany,
etc.
• Dolby
Digital disc
• Stereo
disc
• Digital
Audio disc
• DTS disc
• NTSC broadcast
system in USA,
Canada, japan,
South Korea, etc.
LINE OUT
L
AUDIO
DIGITAL AUDIO OUT
S-VIDEO OUT
OPTICAL
COAXIAL
R
Playback Region Number
S-VIDEO OUT JACK
VIDEO OUT SOCKET
Both the DVD player and the discs are coded by region. These regional codes must match in order for the
disc to play. If the codes do not match, the disc will not play.
The Region Number for this player is described on the rear panel of the player.
AV1 (EURO AV) IN/OUT SCART
(EURO-21) SOCKET
DIGITAL AUDIO OUT SOCKET
(OPTICAL)
OUT TO TV CONNECTOR
DIGITAL AUDIO OUT SOCKET
(COAXIAL)
6
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Infrared Remote Control
Display Indicators
1
2
3
4
5
GB
GB
1
2
3
4
5
6
7
STANDBY/ON
SHUTTLE << / >>
CLEAR
STANDBY/ON
OPEN/CLOSE
1
18
DVD
TV MUTE. AUDIO
VOLUME +/–
REWIND
SKIP BACK
STOP
STEREO
7
2
19
20
8
9
SUBTITLE
6
8
10 MENU
11 UP
12 LEFT
13 DOWN
14 SPEED
15 RECORD
16 TIMER
17 ANGLE
IPC
3
4
1
2
3
The DVD Deck is active
6
7
A DVD with a DTS soundtrack is loaded
The Hi-Fi track of a VHS tape is playing
(The current TV show or video is broadcast in
Stereo)
A DVD, CD or SVCD is loaded
The time, counter position, time remaining or
current deck status is displayed
VHS tape is inserted
21
5
6
4
5
8
A Timer Recording is programmed or in progress.
22
23
18 OPEN/CLOSE
19 0-9
The VCR Deck is active
20 TV/VCR
21 VCR, TV SELECT
22 INPUT SEL.
F.ADV/STEP
23 PROG
TRACKING
24 FAST-FORWARD
SKIP NEXT
25 PLAY/STILL
26 INFO.
27 RETURN
28 RIGHT
29 OK
30 EZ VIEW
31 DISC MENU
32 MARK
24
25
26
7
8
9
10
27
28
29
11
12
OK
Accessories
13
14
15
30
31
You have just purchased a SAMSUNG Video Cassette Recorder (DVD-VCR).
Together with your DVD-VCR, you will find the following accessories in the box.
32
33
16
17
SEARCH
33 MODE
REPEAT
REMOTE CONTROL
& BATTERIES
AUDIO & VIDEO
CABLE
OWNER’S
INSTRUCTIONS
COAXIAL CABLE
8
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Deciding How to Connect DVD-VCR
Connecting DVD-VCR to the TV using the Coaxial Cable
To receive television programmes a signal must be received from
one of the following sources:
◆ An outdoor aerial
◆ An indoor aerial
You must take into account various factors when connecting audio or video systems:
◆ Types of connectors available on your systems
◆ A cable television network
◆ A satellite receiver
◆ Systems connected permanently to the DVD-VCR (satellite receiver for example) or
temporarily (camcorder for example)
LINE
O
GB
GB
2
◆
Make sure that both the television and the DVD-VCR
are switched off before connecting the cables.
Your DVD-VCR is equipped with the following connectors.
1
2
Remove the aerial or network input cable from the television.
Connect this cable to the 75Ω coaxial socket marked
on
Connector
Location
Type
Direction
Recommended Use
the rear of your DVD-VCR.
TV
3
4
5
Plug the coaxial cable supplied into the
DVD-VCR.
socket on your
AV1 (EURO AV) Rear
SCART
In/Out
◆
◆
◆
Television
Satellite receiver
Other VCR
TV
LINE OUT
L
Plug the other end of the coaxial cable into the connector
previously used for the aerial on the television.
AV2 IN
Rear
Rear
SCART
In
◆
Satellite receiver
R
4
◆ Other VCR
3
To obtain better quality pictures and sound on your television,
you can also connect your DVD-VCR to the television via the
SCART cable (see section below) if your television is equipped
with this type of connection.
Audio output
Audio RCA
Out
◆
◆
Audio out
Connecting DVD-VCR to the TV using the SCART Cable
AUX
Front
Aux
Audio/Video
In
Audio in
Video in
Aerial
VIDEO output Rear
RCA
Out
Out
◆
◆
Video out
TV
S-VIDEO
output
Rear
S-JACK
S-Video out (DVD only)
LINE OUT
L
S-VIDEO OUT
AUDIO
3
R
Digital AUDIO Rear
Optical
Coaxial
Out
Out
◆
◆
Digital Audio out (DVD only)
Television
SCART Cable
output
OPTICAL
RF coaxial cable
COAXIAL
OUT TO TV
Rear
75 Ω
You can connect your DVD-VCR to the television using the SCART cable if the appropriate input is available
on the television. You thus:
coaxial
◆ Obtain better quality sound and pictures
◆ Simplify the setting up procedure of your DVD-VCR
IN FROM ANT. Rear
75 Ω
In
◆
Aerial
◆
◆ Regardless of the type of connection chosen, you must always connect the coaxial cable
supplied. Otherwise, no picture will be visible on the screen when the DVD-VCR is switched
off.
coaxial
◆
◆
Cable television network
Satellite receiver
◆ Make sure that both the television and the DVD-VCR are switched off before connecting the
cables.
◆
Whenever you connect an audio or video system to your DVD-VCR, ensure that all elements
are switched off.
1
2
3
Connect the coaxial cable as indicated in the above section.
Refer to the documentation supplied with your equipment for detailed connection instructions
and associated safety precautions.
Connect one end of the SCART cable to the AV1 (EURO AV) socket on the rear of the DVD-VCR.
Plug the other end into the appropriate connector on the television.
10
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting DVD-VCR to a Satellite Receiver or Other Equipment
Plug & Auto Set up
You can connect your DVD-VCR to a Satellite receiver or other DVD-VCR using the SCART cable if the
appropriate outputs are available on the equipment chosen. The following illustrations give a few
examples of the connection possibilities.
Your DVD-VCR will automatically set itself up when it is plugged
into the mains for the first time. TV stations will be stored in
memory. The process takes a few minutes. Your DVD-VCR will
then be ready for use.
TV
1. AV1(EURO AV): By means of 21-pin Scart Cable
LINE OUT
L
GB
GB
Plug the SCART Cable with satellite receiver or other equipment into the AV1 (EURO AV) socket on the rear of the
DVD-VCR.
After making this connection, select the source by pressing the INPUT SEL. button for the AV1 input sources.
1
2
Connect the coaxial cable as indicated on page 11.
(Connecting Your DVD-VCR to the TV Using the Coaxial Cable)
R
2. By means of RF Coaxial Cable
Plug the DVD-VCR into the mains.
Result:
The Language Set menu is displayed.
After making this connection, you must preset the station received through the satellite tuner.
RF output channel of the satellite receiver should be adjusted away from channel 36, which is used by the
DVD-VCR, e.g. re-adjust to channel 39.
3
4
Select the required language by pressing the
ꢀ
or
❷
buttons.
Press OK to store the language selected.
Aerial
Satellite Receiver or other Equipment
Result:
Press OK button.
Press the or buttons to select your country.
A message appears.
Aerial Connector
2
5
6
ꢀ
❷
◆
The VCR searches for the stations according to a preset
preference list corresponding to the country that you have
selected.
2
TV
7
Press OK to start the auto scanning.
1
◆
The number of stations automatically stored by the VCR
depends on the number of stations that it has found.
SCART Cable
8
The current time and date are displayed automatically.
Check the date and time.
if it is :
RF coaxial cable
◆
◆
Correct, Press RETURN button twice to exit the menu.
incorrect, see page 17.
Auto setup
Please wait
◆
Auto preset can be performed by pressing (STOP) on
the VCR continuously for 5 seconds or more with no
tape inserted.
◆
1. AV2 IN: By means of 21-pin Scart Cable
00 %
Plug the SCART Cable with satellite receiver or other equipment into the AV2 (DEC./EXT.) socket on the rear of
the DVD-VCR.
After making this connection, select the source by pressing the INPUT SEL. button for the AV2 input sources.
2. By means of RF Coaxial Cable
After making this connection, you must preset the station received through the satellite tuner.
RF output channel of the satellite receiver should be adjusted away from channel 36, which is used by the
DVD-VCR, e.g. re-adjust to channel 39.
Clock Set
Aerial
Satellite Receiver or other Equipment
Time
Date
Year
Aerial Connector
12 : 00
1 / JAN / 2003 WED
Auto Clock
:
On
2
1
TV
SCART Cable
RF coaxial cable
12
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Tuning Your Television for the DVD-VCR
Deck Control Keys
The DVD-VCR uses one set of controls to operate both decks.
The following keys are helpful in successfully controlling each
deck.
You must tune your television for the DVD-VCR only if you are
not using a Scart cable
◆
To view pictures from your DVD-VCR when a Scart
cable is used, the television must be set to the
audio/video mode (AV).
STANDBY/ON
GB
STANDBY/ON
OPEN/CLOSE
GB
1
2
STANDBY/ON Button
Press the STANDBY/ON button on the remote control or front
2
panel to turn on the DVD-VCR.
1
1
1
2
Switch on the television.
DVD Button
Press the DVD button on the remote control when you want to
Switch on the DVD-VCR by pressing STANDBY/ON on the front
of the DVD-VCR or STANDBY/ON on the remote control.
control the DVD deck.
◆ The DVD indicator will light on the Front Panel Display to
show that the DVD deck is selected.
3
4
Select a programme position on the television to be reserved for
use with your DVD-VCR.
3
4
VCR Button
Insert the video cassette in the DVD-VCR. Check that the
Press the VCR button on remote control when you want to
control the VCR deck.
◆ The VCR indicator will light on the Front Panel Display to
show that VHS deck is selected.
DVD-VCR starts reading the cassette; if not, press
.
button
3
❿
II
2
5
6
7
Start a scan on your television or set the television to UHF
channel 36.
4
INPUT SEL. BUTTON
4
Fine tune the television until the pictures and sound are obtained
clearly.
Press the INPUT SEL. button repeatedly to cycle through all of
your input sources, including the Tuner (PR##), AV1 (rear AV
input), AV2 (rear AV input), AUX (front AV input).
If you cannot find the pictures and sound, or there is interference
from nearby channels, it may be necessary to change the setting
of the DVD-VCR output channel (see Setting the DVD-VCR
Output Channel on page 23 and Problems and Solutions on
page 66).
•
It is only available when VCR deck is selected.
◆
Before using the VCR operation of 19~43 pages, press
the VCR button on the remote control to select VCR
mode.
8
When the picture and sound are perfectly clear, store this
channel at the desired programme position on the television.
Before using the DVD operation of 45~64 pages, press
the DVD button on the remote control to select and
watch DVD.
Result:
That programme is now reserved for use with your
DVD-VCR.
14
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic TV Tuner Operations
Inserting Batteries in the Remote Control
You must insert or replace the batteries in the remote control
when you:
The following buttons are used when watching television via the
DVD-VCR’s built-in TV tuner.
◆ Purchase the DVD-VCR
1
◆ Find that the remote control is no longer working
correctly
GB
GB
1
TV/VCR Button
Press to switch between your TV’s tuner and the VCR’s internal
1
tuner.
1
2
Push the tab in the direction of the arrow to release the battery
compartment cover on the rear of the remote control.
2
3
PROG
Button
Press to change to the next or previous channel.
Insert two AAA, RO3 or equivalent batteries, taking care to
respect the polarities:
0-9 Buttons
Press to select channels directly.
◆
+ on the battery with + on the remote control
◆
– on the battery with – on the remote control
4
INFO.
2
2
Press to display the channel you are watching.
◆ Also works in DVD and VCR mode.
3
Replace the cover by aligning it with the base of the remote
control and pushing it back into place.
◆
Do not mix different battery types (manganese and
alkaline for example).
Setting the Date and Time
Your DVD-VCR contains a 24-hour clock and calendar used to:
◆ Automatically stop programme recording
◆ Preset your DVD-VCR to record a programme
automatically
3
You must set the date and time when:
Language
:
English
◆ You purchase the DVD-VCR
Install
◆ The time and date are set automatically from the
◆
User Set
Auto Power Off
Screen Messages
:
:
Off
On
broadcast signal. If the signal is weak or ghosting
occurs, the time and date may not be set automati-
cally. In this case, they should be set manually.
4
◆ Do not forget to reset the time when you change
clocks from winter to summer time and vice versa.
OK
1
2
3
4
5
After pressing the MENU, press the OK or ❿ .
Result: The Setup menu is displayed.
Clock Set
Time
Date
Year
12 : 00
1 / JAN / 2003 WED
Press the corresponding
option.
ꢀ
,
❷
buttons to select the Clock
Press the OK or
❿
to select this option.
Result: The Clock Setmenu is displayed.
Press
Result:
➛
or
❿
to select the hour, minutes, day, month and year.
The option selected highlight.
Press the
Result:
ꢀ
or buttons to increase or decrease the value.
❷
The day of the week is displayed automatically.
or buttons down to scroll more
quickly through the values.
On completion, press RETURN to exit the menu.
◆
You can hold the
ꢀ
❷
6
16
17
Download from Www.Somanuals.com. All Manuals Search And Download.
VCR
Setting the Menu Language
Presetting the Stations Automatically
You do not need to preset the stations if you have already
set them automatically (see Plug & Auto Set Up on page 13).
◆
1
Open “MENU”
After pressing the MENU, press the OK or ❿ .
Your DVD-VCR contains a built-in tuner used to receive television
broadcasts.
Language
:
English
Install
User Set
GB
GB
You must preset the stations received through the tuner. This can
be done:
1
OK
2
Select “Language”
Auto Power Off
Screen Messages
:
:
Off
On
Use the
ꢀ
or
❷
buttons to highlight
◆ Plug & Auto Set up (see page 13)
“Language,” then press the OK or ❿ .
◆ Automatically
◆ Manually (see page 20)
3
4
Set menu Language
Place the selection arrow next to your desired Language, then
press the OK button.
You can store up to 80 stations.
1
After pressing the MENU, press the OK or ❿ .
Result: The Setup menu is displayed.
Press the
ꢀ
or
❷
buttons to select language you want.
Install
Language
:
English
Place the selection arrow next to your desired Language, then
press the OK button.
2
3
Press the corresponding
option.
ꢀ
,
❷
buttons to select the Install
Auto Setup
Manual Setup
Install
User Set
TV System
VCR Output CH
:
K
Press the OK or
❿
to select this option.
: CH 36
Auto Power Off
Screen Messages
:
:
Off
On
5
On completion, press RETURN to exit the menu.
Result: The Install menu is displayed.
4
Press the corresponding
ꢀ
or
❷
buttons, until the Auto
Setupis selected.
And then press the OK or
❿
to select this option.
Result:
A message appears, indicating that any channels
already preset on your DVD-VCR will be deleted.
Language Set
5
6
Press the
ꢀ
or
❷
buttons to select your country.
Auto Setup
English
◆
The VCR searches for the stations according to a preset
preference list corresponding to the country that you have
selected.
Français
Deutsch
Español
Italiano
Your date will be lost
Press OK to continue
Menu
to exit
Press OK button.
Result: A message appears, indicating that any channels
already preset on your VCR will be deleted.
Nederlands
7
Press OK to start the auto scanning.
Result:
◆
◆
◆
◆
The Please Waitindication highlight on the
television screen.
The first frequency band is scanned and the first
station found is displayed and stored.
The DVD-VCR then searches for the second station
and so on.
Auto Setup
15%
Please Wait
When the automatic scanning procedure has
finished, the DVD-VCR switches automatically to
programme 1.
◆
The number of stations automatically stored by the DVD-
VCR depends on the number of stations that it has found.
8
If you wish to cancel the auto scanning before the end, press the
MENU button to exit the menu.
◆
◆ The time and date are set automatically from the
broadcast signal. If the signal is weak or ghosting
occurs, the time and date may not be set automati-
cally. In this case, they should be set manually
(see page 17).
◆ Once the auto scanning procedure has finished, some
stations may have been stored more than once; select
the stations with the best reception and delete the
ones no longer required (see page 21).
18
19
Download from Www.Somanuals.com. All Manuals Search And Download.
VCR
VCR
Presetting the Stations Manually
Clearing a Preset Station
◆
You do not need to preset the stations manually if you
have already set them automatically.
If you have stored a TV station:
◆ That you do not require
Language
:
English
1
2
3
4
5
After pressing the MENU, press the OK or ❿ .
Result: The Setup menu is displayed.
Language
:
English
◆ At the wrong programme position
Install
User Set
Install
User Set
GB
GB
you can cancel it.
Press the corresponding
option.
ꢀ
,
❷
buttons to select the Install
Auto Power Off
Screen Messages
:
:
Off
On
Auto Power Off
Screen Messages
:
:
Off
On
Press the OK or
❿
to select this option.
1
2
3
4
5
6
After pressing the MENU, press the OK or ❿ .
Result: The Setup menu is displayed.
Result: The Installmenu is displayed.
Press the corresponding
Setupoption is selected.
ꢀ
or
❷
buttons, until the Manual
Press the corresponding
option.
ꢀ
,
❷
buttons to select the Install
Install
Press the OK or
❿
to select a Manual Setupoption.
Install
Press the OK or
❿
to select this option.
Result:
The TV STATION TABLEmenu is displayed.
Auto Setup
Auto Setup
Result: The Installmenu is displayed.
Manual Setup
Manual Setup
6
7
Press the
required.
ꢀ
or ❷ buttons to select a programme number as
TV System
VCR Output CH
:
K
TV System
VCR Output CH
:
K
: CH 36
: CH 36
Press the corresponding
ꢀ
or
❷
buttons, until the Manual
Setupoption is selected.
Press the ❿ꢁbutton to preset the station.
Result:
The MANUAL TUNINGmenu is displayed.
Press the OK or
Result: The TV STATION TABLEmenu is displayed.
❿
to select a Manual Setupoption.
8
Press the
Result:
➛
or buttons to start scanning channel.
❿
The frequency band is scanned and the first station
found is displayed.
Press the corresponding
ꢀ
or
❷
buttons, until the required
preset TV station (PR) is selected.
9
Press the
❷
button, until the DECODERis selected.
TV STATION TABLE
NAME
TV STATION TABLE
NAME
10 Press the
❿
button to activate or deactivate use of the decoder
7
8
Press the CLEAR button.
PR
1
CH
21
DEC
PR
1
CH
DEC
for the TV station, if necessary.
11 Press the
ꢀ
or❷ buttons until the NAMEis selected.
Repeat the same procedure from Step
required stations have been cleared.
6
onwards until all the
2
2
The station name is set automatically from the broadcast signal.
3
3
4
4
12 To change the programme’s name, press the ❿ꢁbutton.
5
5
9
On completion, press the RETURN button four times to exit the
menu.
Result:
The first letter of the name flashes.
SWAPPING : OK
RETURN
SWAPPING : OK
RETURN
13 To...
Then...
DELETE
:
CLEAR
DELETE
:
CLEAR
Select a character
in the name
Press the
required character is displayed
(letters, numbers or “-” character).
ꢀ
or
❷
button until the
MANUAL TUNING
Move to the next or
previous character
Press the
respectively.
❿
or
➛
buttons
PR
:
:
:
:
:
CH
- - -
-
14 If you...
Then...
MFT
DECODER
NAME
OFF
- - - -
Wish to store the
station displayed
◆ Press the
is selected.
◆ Press the
ꢀ
or ❷ꢁbuttons until the MFT
MEMORY
:
OK
➛
or
❿
buttons to adjust the
RETURN
picture, if necessary.
◆ Press OK to store the station
Do not wish to
store the station
displayed
◆ Press the
is selected.
◆ Press the
scanning the frequency band and display
the next station
ꢀ
or
❷
buttons until the CH
➛
or
❿
buttons to go on
◆ Go back to the beginning of Step 14
15 Repeat this procedure from Step
6
onwards, until all the required
stations have been stored.
16 On completion, press the RETURN button three times to exit the
menu.
20
21
Download from Www.Somanuals.com. All Manuals Search And Download.
VCR
VCR
Changing the Preset Station Table
Selecting the RF OUT Sound Mode (B/G-D/K)
You can choose the sound mode (B/G or D/K) according to the
TV set connected to your VCR.
You can rearrange the Station Table and give different
programme numbers to the stations listed according to your own
preferences.
Language
:
English
Language
:
English
Install
GB
GB
1
2
3
4
After pressing the MENU, press the OK or
Result: The Setup menu is displayed.
❿.
User Set
Install
User Set
Auto Power Off
Screen Messages
:
:
Off
On
Auto Power Off
Screen Messages
:
:
Off
On
1
2
3
4
5
6
After pressing the MENU, press the OK or ❿ .
Result: The Setup menu is displayed.
Press the corresponding
ꢀ,
❷
or
➛
,
❿
buttons to select the
Install option.
Press the corresponding
option.
ꢀ
,
❷
buttons to select the Install
Press the OK or
❿
to select this option.
Clock Set
Result: The Install menu is displayed.
Press the OK or
❿
buttons to select this option.
Install
Result: The Installmenu is displayed.
Press the OK or
selected.
❷
buttons, until the TV System option is
Install
Auto Setup
Auto Setup
Manual Setup
Press the corresponding
Setupoption is selected.
ꢀ
or
❷
buttons, until the Manual
K
Manual Setup
TV System
:
K
5
6
Press the OK or
❿
buttons to select G or K.
G
VCR Output CH
: CH 36
TV System
VCR Output CH
:
K
: CH 36
Press the OK or
❿
button to select this option.
On completion, press RETURN to exit the menu.
Result: The TV STATION TABLEmenu is displayed.
Press the corresponding
ꢀ
or
❷
buttons, until the required
preset TV programme is selected.
Result:
The selected station is displayed at the same time on
the television screen.
TV STATION TABLE
7
To change the programme number assigned to a station press
the OK button on the remote control. (For example, To move a
TV station in programme 1 to programme 3)
PR
1
CH
NAME
DEC
VCR
Setting the DVD-VCR Output Channel
21
- - - -
2
3
8
9
Press the
ꢀ
or
❷
buttons to select required position.
Your DVD-VCR output channel may need to be changed if the
pictures suffer from interference or if your TV cannot find the
pictures.
4
And then press OK again to swap the position.
5
On completion, press the RETURN button four times to exit the
menu.
SWAPPING : OK
RETURN
DELETE
:
CLEAR
Also, you can change the DVD-VCR output channel to adjust the
frequency in which information is displayed on the screen.
Language
:
English
Install
User Set
1
2
3
4
5
After pressing the MENU, press the OK or
Result: The Setup menu is displayed.
❿
.
TV STATION TABLE
Auto Power Off
Screen Messages
:
:
Off
On
PR
1
CH
21
NAME
DEC
Press the corresponding
option.
ꢀ
,
❷
buttons to select the Install
2
3
- - - -
4
Press the OK or
❿
to select this option.
5
Result:
The Installmenu is displayed.
SWAPPING : OK
RETURN
Install
DELETE
:
CLEAR
Press the
is selected.
ꢀ
or
❷
buttons, until the VCR Output CHoption
Auto Setup
Manual Setup
CH:21
:
CH:36
:
TV System
VCR Output CH
:
K
: CH 36
Select the required output channel (CH21~CH69) by pressing
the OK or buttons.
❿
CH:69
CH21
.. CH36
.. CH69
6
On completion, press RETURN to exit the menu.
Then tune your television again (see page 14).
22
23
Download from Www.Somanuals.com. All Manuals Search And Download.
VCR
VCR
Selecting the Colour Mode
Intelligent Picture Control
Before recording or playing back a cassette, you can select the
required system standard.
The Intelligent Picture Control Feature allows you to adjust the
sharpness of the image automatically, according to your own
preferences.
Otherwise, the system automatically selects the reception
standard when you select AUTO.
Language
:
English
Language
:
English
1
2
3
4
5
6
During playback, press the MENU button on the remote control.
Result: The Setup menu is displayed.
Install
User Set
◆
◆
When playing back a cassette, the standard is
automatically selected by the DVD-VCR.
Install
User Set
GB
GB
Auto Power Off
Screen Messages
:
:
Off
On
Auto Power Off
Screen Messages
:
:
Off
On
Press the OK or ❿ .
◆
When you playback an NTSC-recorded tape on this DVD-
VCR make a setting on the colour system according to
your TV. If your TV is a PAL system only TV, set NTPB.
If your TV is Multi System TV (NTSC 4.43 compatible), set
NT4.43 and you can record NT4.43.
Result:
The Setup menu is displayed.
Press the corresponding
ꢀ,
❷ꢁbuttons to select the
User Setoption.
Press the OK or ❿ꢁbuttons to select this option.
Result: The User Setmenu is displayed.
User Set
Auto
1
2
3
After pressing the MENU, press the OK or ❿ .
Press the corresponding
selected.
ꢀ
or
❷
buttons, until the IPCoption is
PAL
MESECAM
B/W
User Set
Colour System
NICAM
:
:
:
:
Auto
On
Result:
The Setup menu is displayed.
Colour System
NICAM
:
:
:
:
Auto
IPC
On
Off
Press the corresponding
ꢀ,
❷
buttons to select the
On
On
Off
Press the OK or ❿ꢁbuttons to select the IPC (intelligent picture
control) option.
On
Off
ShowView Extend
User Setoption.
IPC
ShowView Extend
Press the OK or
❿
to select this option.
◆
When intelligent picture control mode is On the
,
sharpness
Result: The User Setmenu is displayed.
of the image is adjusted automatically.
4
5
Press the corresponding or buttons, until the Colour
ꢀ
❷
7
8
To adjust the sharpness manually, press the
Off
❷
button to turn
Systemoption is selected.
the IPC mode
Press the or
.
Press the OK or button to select Auto◆PAL◆MESECAM◆B/W.
❿
➛
❿
buttons until the picture is displayed according
Auto When playing back a cassette, the system standard is
to your preferences.
If you do not press a button within ten seconds, the
PICTURE menu disappears automatically.
On completion, press the RETURN button again.
automatically selected by the DVD-VCR.
◆
B/W Black and White
6
On completion, press RETURN three time to exit the menu.
9
VCR
VCR
NICAM
Intelligent Picture Control ( Remote Control )
NICAM programmes are divided into 3 types. NICAM Stereo,
NICAM Mono and Bilingual (transmission in another language).
NICAM programmes are always accompanied by a standard
mono sound broadcast and you can select the desired sound.
Please refer to page 37.
1
During playback, press the IPC button.
OK
Result:
The PICTUREmenu is displayed.
button to turn the IPC (Intelligent Picture Control)
Language
:
English
2
Press the
❷
Install
User Set
option Onand Off
.
1
After pressing the MENU, press the OK or ❿ .
Result: The Setup menu is displayed.
Auto Power Off
Screen Messages
:
:
Off
On
◆
When Intelligent Picture Control mode is On the
sharpness of the image is adjusted automatically.
,
2
3
Press the corresponding
User Setoption.
ꢀ
,
❷
buttons to select the
5
3
4
To adjust the sharpness manually, select Intelligent Picture
Control mode Off
The horizontal picture adjusting appears.
Press the OK or
❿
to select this option.
.
Result: The User Setmenu is displayed.
◆
4
5
Press the corresponding
options selected.
ꢀ
or
❷
buttons, until the NICAM
, until...
Press the or buttons until the picture is displayed according
to your preferences.
If you do not press a button within ten seconds, the
➛
❿
User Set
Colour System
NICAM
:
:
:
:
Auto
On
On
Off
To...
Press OK or
❿
◆
IPC
On
Off
PICTUREmenu disappears automatically.
Mono mode
Offis displayed.
ShowView Extend
Off: Only set at this position to record
the standard mono sound during a
NICAM broadcast if the stereo sound is
distorted due to inferior reception
conditions.
5
On completion, press the IPC button again.
NICAM mode
Onis displayed.
On: Normally set at this position.
6
On completion, press RETURN three times to exit the menu.
24
25
Download from Www.Somanuals.com. All Manuals Search And Download.
VCR
VCR
Screen Messages
ShowView Extend
Your DVD-VCR displays most information both on the DVD-VCR
and the television.
To prevent delays or over-runs the VCR has a function called
ShowView EXTEND allowing you to extend the recording time by
up to 60 minutes.
Language
:
English
You can choose to display or hide this information on the
television screen (except for the SEARCH, Programming MENU
and Timer functions, which cannot be hidden).
Install
User Set
◆
Only use if PDC is not available or set to Off.
Language
:
English
Auto Power Off
Screen Messages
:
:
Off
On
GB
GB
1
2
After pressing the MENU, press the OK or ❿ .
Install
User Set
1
2
3
After pressing the MENU, press the OK or ❿ .
Result: The Setup menu is displayed.
Press the corresponding
option.
ꢀ,
❷
buttons to select the User Set
Auto Power Off
Screen Messages
:
:
Off
On
On
Off
Press the corresponding
Messagesoption is selected.
ꢀ
or
❷
buttons, until the Screen
3
4
5
6
Press the OK or ❿ꢁbuttons to select this option.
Result: The User Setmenu is displayed.
User Set
To...
Press OK or ❿, until...
Press the corresponding or buttons, until the
ꢀ
❷
Colour System
NICAM
:
:
:
:
Auto
On
Off
10
20
30
40
50
60
ShowView Extendoption is selected.
Display on-screen information
Hide on-screen information
Onis displayed.
IPC
On
Off
Press the OK or buttons to set the ShowView Extendtime
❿
ShowView Extend
Offis displayed.
by increments of 10 minutes.
To turn off, press OKor
❿
buttons repeatedly until Offshows.
4
On completion, press RETURN twice to exit the menu.
VCR
VCR
Selecting the Cassette Type
Auto Power Off
If you wish to use the tape counter to display the time remaining
on a cassette, you must indicate the type of cassette inserted.
The Auto Power Off feature automatically turns off your DVD-
VCR if no signal is received and you do not press any button for
the selected time.
Language
:
English
Language
:
English
1
2
3
4
After pressing the MENU press the corresponding
buttons to select the VCR option.
ꢀ
,
❷
Install
User Set
Install
User Set
1
2
3
After pressing the MENU, press the OK or ❿ .
Result: The Setup menu is displayed.
Auto Power Off
Screen Messages
:
:
Off
On
Auto Power Off
Screen Messages
:
:
Off
On
Press the OK or
❿
buttons to select this option.
Result: The VCR Setupmenu is displayed.
Press the corresponding
Power Offoption is selected.
ꢀ
or
❷
buttons, until the Auto
Press the corresponding
Selectoption is selected.
ꢀ
or
❷
buttons, until the Tape
Press the
Power Off interval.
❿ꢁbuttons, until you select the time of Auto
OK or
VCR Setup
Press the OK or
❿
buttons as many times as required, until the
E180
E240
E260
E300
Off
1Hour
2Hour
3Hour
correct cassette length is displayed.
Tape Select
Repeat Play
S-VHS
:
E180
Language
:
English
:
Off
Off
E180
E 300
E240
E260
:
Install
User Set
4
On completion, press RETURN twice to exit the menu.
Off
Auto Power Off
Screen Messages
:
:
Off
On
1Hour
2Hour
3Hour
5
Press RETURN twice to exit the menu.
26
27
Download from Www.Somanuals.com. All Manuals Search And Download.
VCR
VCR
Repeat Play
Selecting the Recording Speed
You can set repeat play to repeat the tape continuously from
beginning to end.
You can record a cassette at two different speeds:
◆ SP (Standard Play)
T
ype
Recording Time (in SP)
180 mins. or 3 hours
240 mins. or 4 hours
Language
:
English
E-180
E-240
E-260
◆ LP (Long Play)
In Long Play modes:
GB
GB
1
2
3
4
After pressing the MENU, press the corresponding
buttons to select the VCR option.
ꢀ
,
❷
Install
User Set
260 mins. or
4 hours and 20 mins.
◆ Each cassette lasts twice as long
◆ The recording is of a slightly lower quality
Auto Power Off
Screen Messages
:
:
Off
On
Press the OK or ❿ꢁbuttons to select this option.
E-300
300 mins. or 5 hours
Result:
The VCR Setupmenu is displayed.
To record a cassette...
Press the SPEED button on the
remote control, until...
Press the corresponding
Playoption is selected.
ꢀ
or
❷
buttons, until the Repeat
In standard play mode
In long play mode
SPis displayed.
LPis displayed.
OK
VCR Setup
To...
Press OK or
❿, until...
Tape Select
Repeat Play
S-VHS
:
:
:
E180
Off
Off
On
Repeat play
Onis displayed.
Off
Do not wish to repeat play
Offis displayed.
5
On completion, press RETURN twice to exit the menu.
VCR
S-VHS Play
The DVD-VCR allows you to playback high quality S-VHS tapes.
Language
:
English
1
2
3
4
During S-VHS play mode after pressing the MENU press the
Install
User Set
corresponding
ꢀ,
❷
buttons to select the VCR option.
Auto Power Off
Screen Messages
:
:
Off
On
Press the OK or
Result:
❿
buttons to select this option.
The VCR Setupmenu is displayed.
Press the corresponding
option is selected.
ꢀ
or
❷
buttons, until the S-VHS
To...
Press OK or ❿, until...
VCR Setup
Tape Select
Repeat Play
S-VHS
:
:
:
E180
Off
S-VHS play
Onis displayed.
Off
On
Off
Do not wish to S-VHS play
Offis displayed.
5
On completion, press RETURN twice to exit the menu.
To watch S-VHS tapes, set the S-VHS mode to Onin the VCR
Setup.
28
29
Download from Www.Somanuals.com. All Manuals Search And Download.
VCR
VCR
Protecting a Recorded Cassette
Recording a Programme with Automatic Stop
Video cassettes have a safety tab to prevent accidental erasure.
When this tab has been removed, you cannot record on the tape.
This function enables you to record up to nine hours (LP) of
programmes.
Your DVD-VCR stops automatically after the requested length of
time.
1
2
If you wish to protect a cassette, break off the tab using a small
screwdriver.
GB
GB
1
To re-record over a protected cassette (safety tab broken),
cover the hole with adhesive tape.
1
2
Switch on the television.
3
To monitor the programme being recorded, select the television
channel reserved for use with your DVD-VCR (or the AV input if
used).
4
3
4
Insert the cassette on which the programme is to be recorded,
with the window visible and the safety tab intact or the opening
covered with adhesive tape.
VCR
Recording a Programme Immediately
Result:
The DVD-VCR is switched on automatically.
Before recording a programme, you must have preset the corres-
ponding station (unless you are recording via an external video
source). If you have not done so, refer to pages 19 and 20.
Select:
4
◆
◆
The station to be recorded using the PROG ( or
or
)
buttons
4
1
2
Switch on the television.
The AV1, AV2 or AUX source using the INPUT SEL. button
for a satellite tuner or external video source
To monitor the programme being recorded, select the television
channel reserved for use with your DVD-VCR (or the AV input if
used).
Result:
The channel number is displayed and the
programme can be seen on the television.
OK
4
5
6
Select the recording speed by pressing the SPEED button as
many times as required (see page 29).
3
4
Insert the cassette on which the programme is to be recorded,
with the window visible and the safety tab intact or the opening
covered with adhesive tape.
6
Hold the REC button ( ) down for a while to start recording.
◆
Result:
The DVD-VCR is switched on automatically.
5
Result:
The record indicator appears on the television screen
and DVD-VCR display. An index is recorded on the
tape (see page 39).
OK
Select:
◆
◆
The station to be recorded using the PROG ( or
or
)
buttons
6
7
8
Press the REC button ( ) several times to increase the
◆
The AV1, AV2 or AUX source using the INPUT SEL. button
for a satellite tuner or external video source
recording time in:
5
◆
30-minute intervals up to four hours
1-hour intervals up to nine hours
Result:
The station number is displayed and the programme
can be seen on the television.
◆
LENGTH 2:30
SET LENGTH :
Result:
The length is displayed on the television displays.
The selected programme is recorded for the length of
time requested. At the end of that time, the DVD-
VCR stops recording automatically and power off.
5
6
Select the recording speed by pressing the SPEED button as
many times as required (see page 29).
PRESS REC
◆
Hold REC ( ) down for a while to start recording.
◆
If you wish to cancel the recording before the end, press
STANDBY/ON.
Result:
The record indicator appears on the television and
DVD-VCR display. An index is recorded on the tape
(see page 39).
7
◆
If the end of the tape is reached while recording:
The recording stops and power off.
7
To stop recording, press once.
◆
◆
OK
◆
This function is not available in DVD recording
◆
◆ If your DVD-VCR ejects the cassette when you start
recording, check to make sure that the cassette’s
safety tab is intact or that the opening (created by a
broken safety tab) is covered with adhesive tape.
◆ If you reach the end of the tape while recording,
the cassette rewinds automatically.
30
31
Download from Www.Somanuals.com. All Manuals Search And Download.
VCR
VCR
Using the ShowView
Modifying ShowView Programming
OK
If you wish to correct the programme displayed or modify certain elements, such as the recording speed,
you can do so before you press RETURN a second time to confirm.
Before presetting your DVD-VCR:
◆ Switch on both the television and your DVD-VCR
◆ Check that the date and time are correct
If you wish to...
Then...
GB
GB
◆ Insert the cassette on which the programme is to be
recorded (safety tab intact)
Select an input source other
◆
◆
Press the
➛
or
❿
buttons, until the PRselection mode.
than the tuner (AV1, AV2 or AUX)
Press the INPUT SEL. button one or more times to change the
input source selection.
Up to six programmes can be preset.
1
Result:
The programme number is replaced by:
1
To enter a ShowView, press the TIMER button.
Press the
Result:
ꢀ
or ❷ꢁand OK or ❿ꢁbuttons to select ShowView
•
The AV1, AV2 or AUX source using the INPUT
SEL. button for a satellite tuner or external video
source
Timer Method
A message is displayed to allow you to enter the
ShowViewcode.
Standard
ShowView
◆
If all six programmes have been set, the message Timer
is fullis displayed. Refer to page 35 if you wish to
cancel a preset recording.
◆
The input source must be selected before changing any other
value.
Record a programme every day
◆
◆
Press the
➛
or
or
❿
buttons, until the Dayselection mode.
buttons, until the DLY(Daily) value is
2
Press the numeric buttons to enter the code opposite the
programme that you wish to record in your television magazine.
(Monday to Sunday) at the same time
Press the
ꢀ
❷
displayed.
◆
If you wish to correct the ShowView code that you are
entering:
Record a programme every week
◆
◆
Press the
Press the
➛
or
or
❿
buttons, until the Dayselection mode.
buttons, until the W-(Week) value is
on the same day and at the same time
ꢀ
❷
◆
◆
Press the
cleared
Enter the correct digit
➛
button until the digit to be corrected is
ShowView
displayed, followed by the required day.
Example: W-SA(Weekly Saturday)
Code
Code
:
:
0 - 9
3
Press the OK button.
Result: The information concerning the programme is
displayed.
Extend the recording time
Select the recording speed
◆
◆
Press the
Press the
➛
or
or
❿
buttons, until the Stopselection mode.
buttons to increase or decrease the stop time.
Correct
ꢀ
❷
◆
◆
Press the
Press the
➛
or
❿
buttons, until the recording speed selection mode.
buttons until the correct indication is displayed:
◆
When using the ShowViewfunction for the first time with
stored stations, the programme number flashes. This one
time, you must enter the station number manually by
ꢀ
or
❷
• Auto(Auto Tape Speed Select) : see page 34
• SP(Standard Play)
pressing the
if:
ꢀ
or
❷
buttons. Refer to the following page
PR
Day
WE
Start
Stop
Speed
SP
V/P
Off
• LP(Long Play)
1
19
:
:
00 19
:
:
30
◆
◆
The programme number or times flash
You wish to modify the programme
Select the PDC recording
◆
◆
Press the
Press the
➛
or
or
❿
buttons, until the PDC off mode.
buttons until the “On” indication is displayed.
:
:
:
:
:
:
4
If the programme and times are correct, press the RETURN
button.
ꢀ
❷
◆
Do not select PDC unless you are sure the programme you
wish to record is broadcast with PDC. If you do set PDC On
(by selecting “On” in the right - hand column on the screen),
then you must set up the start-time EXACTLY according to
the published TV schedule. Otherwise the timer recording
won’t take place.
5
6
Press the STANDBY/ON button to activate the timer.
Refer to page 35 if you wish to:
◆
◆
Check that your DVD-VCR has been programmed correctly
Cancel a preset recording
STANDBY/ON
OPEN/CLOSE
◆
The numbers next to each TV programme listing are
ShowView code numbers, which allow you to
programme your videorecorder instantly with the
remote control. Tap in the ShowView code for the
programme you wish to record.
5
™
ShowView is a trademark of Gemstar Development Corporation. The ShowView system
is manufactured under licence from Gemstar Development Corporation.
32
33
Download from Www.Somanuals.com. All Manuals Search And Download.
VCR
VCR
Using the Timer Programming Feature
Checking a Preset Recording
The Timer Programming feature allows you to preset the DVD-
You can check your preset recordings:
PR
Date
WE
Start
Stop
Speed
SP
V/P
Off
Timer Method
VCR to record a programme up to one month before that
programme is to be broadcast. Up to six programmes can be
preset.
◆ When you have finished presetting the DVD-VCR
1
19
:
:
00 19
:
:
30
Standard
◆ If you have forgotten which programmes will be
recorded
ShowView
GB
GB
:
:
:
:
:
:
◆
Before presetting a recording, check that the date and
time are correct.
1
2
Press TIMER on the remote control.
Result:
The timer selection is displayed.
1
2
Insert the cassette and press TIMER on the remote control.
Result: The timer selection is displayed.
Press the OK button to select Standard option.
Result:
The TIMER PROGRAMMINGmenu is displayed.
Press the OK button to select Standard option.
Result: The TIMER PROGRAMMINGmenu is displayed.
3
4
Press the
ꢀ
or
❷
buttons to select the required programme.
PR
Day
WE
Start
Stop
Speed
SP
V/P
Off
3
4
Press ❿ꢁꢁto select the input source.
1
19
:
:
00 19
:
:
30
Press the
➛
or
❿
buttons to select and change any values as
Select the required station by pressing the
ꢀ,
❷
buttons or
required. For more details, refer to the previous page.
INPUT SEL. to select the AV1, AV2 or AUX input sources.
Press to select the recording day.
Select the required day by pressing the
Press to select the recording start time.
Select the required hour value by pressing the
Press to select the minutes.
:
:
:
:
:
:
5
On completion, press RETURN twice.
5
6
❿
ꢀ
or
❷
buttons.
7
8
9
❿
ꢀ
or
❷
buttons.
❿
10 Select the required minute value by pressing the
ꢀ
or
❷
STANDBY/ON
OPEN/CLOSE
VCR
Cancelling a Preset Recording
buttons.
11 Press
❿
to select the recording stop time.
17
12 Select the required recording stop time by pressing the
ꢀ
or
❷
buttons, following the same procedure as when selecting the
recording start time.
You can cancel any programmes that are:
◆ Incorrect
PR
Date
WE
Start
Stop
Speed
SP
V/P
Off
1
19
:
:
00 19
:
:
30
13 Press
❿
to select the recording speed.
◆ No longer required
14 Press the
ꢀ
or
❷
buttons to select the SP(Standard Play), LP
:
:
:
:
:
:
(Long Play), Auto(Auto Tape Speed Select) recording speeds.
1
2
Press TIMER on the remote control.
Result:
The timer selection is displayed.
15 Press the
ꢀ
or ❷ buttons to toggle between the PDC
mode (marked On) and the non PDC mode (marked Off).
Press the OK button to select Standard option.
Result:
The TIMER PROGRAMMINGmenu is displayed.
16 When you have finished, press the RETURN button.
17 Press the STANDBY/ON button to activate the timer.
3
4
Select the programme to be cancelled by pressing the
buttons.
ꢀ
or
❷
Result:
Before starting recording, the DVD-VCR compares
the timer duration with the remaining time on the
cassette.
Press the CLEAR button to cancel the selected programme.
Result:
All the recording information is deleted and the
broadcast will not be recorded.
◆
Auto Tape Speed Select. The DVD-VCR’s “Auto Tape
Speed Select” function compares the duration of the
timer recording to the actual recording time remaining
on the tape loaded. If there is insufficient tape to
complete a timer recording in AUTO mode, the DVD-
VCR automatically switches to LP mode to record the
whole programme.
4
5
On completion, press RETURN twice.
34
35
Download from Www.Somanuals.com. All Manuals Search And Download.
VCR
VCR
Selecting the Audio Output Mode
Playing a Cassette
You can select the mode in which the sound is reproduced on the
loudspeakers and AV outputs. The following options are
available.
This function allows you to play back any pre-recorded cassette.
1
2
Switch on both the television and your DVD-VCR.
GB
GB
Insert the video cassette to be played. If the safety tab on the
Option
Description
2
cassette is intact, press ❿ll
.
3
L
Used to listen to the sound on the left Hi-Fi channel.
Used to listen to the sound on the right Hi-Fi channel.
Otherwise, the cassette is played automatically.
◆
When a cassette is loaded, the tape position is optimized
automatically to reduce disturbance (Digital Auto
Tracking).
R
MIX
Used to listen to the mixed sound of the Hi-Fi and
normal channels.
When playing a cassette, if the end of the tape is reached,
the cassette is rewound automatically.
NTSC tapes can be played back but cannot be recorded
with this DVD-VCR.
MONO
L R
Used to listen to the sound on the normal mono
channel.
3
To...
Then press...
L
R
MIX
Used to listen to Hi-Fi stereo sound on the left and right
channels.
3
Stop the playback
Eject the cassette
(STOP).
◆
L R
MONO
AUX
◆
When playing back tapes recorded in Hi-Fi, the
sound switches to Hi-Fi after five seconds of
Mono.
(EJECT).
To select the sound mode, simply press the AUDIO button on the
remote control until the required option is displayed.
VCR
Adjusting Picture Alignment Manually
VCR
Playing a Cassette in Slow Motion
You can play a cassette in slow motion.
The Picture Adjustment feature allows you to adjust the
alignment manually to obtain the best possible picture.
◆
No sound is heard when playing back a cassette in
slow motion.
When noise bars or streaks appear during playback, adjust alignment
manually by pressing the TRK ( or ) buttons until the picture is clear
and stable.
1
2
Press:
◆
❿ll to start playing the cassette
❿ll button one more time to make still mode.
❿❿ to start SLOW mode.
1
1
◆
◆
◆
Result:
◆
◆
◆
The tracking bar appears.
The image is adjusted.
❿❿
➛➛ button as many times as required to decrease or
or
increase the speed respectively
o return to the normal speed, press the ❿ll
The tracking bar disappears when you release the button.
◆
T
button twice.
When playing back in slow motion, picture interference may
occur.
2
Press the TRK (
or ) buttons to minimize this effect.
◆
When you have been using the Slow Motion function
for more than about two minutes, the DVD-VCR will
automatically play to protect the:
2
◆ Cassette
◆ Video heads
36
37
Download from Www.Somanuals.com. All Manuals Search And Download.
VCR
VCR
Playing a Sequence Frame by Frame
Searching for a Specific Sequence
You can:
Each time you record a cassette on this DVD-VCR, an “index” is
automatically marked on the tape when recording starts.
OK
◆ Stop the cassette at a given frame (image)
◆ Advance one frame at a time
The Search function allows you to fast-forward or rewind to a
specific index and start playback from that point. Depending on the
direction selected, the indexes are numbered as follows:
GB
GB
◆
No sound is heard when playing back frame by frame.
1
2
Press:
Prev Seq. being Next
1
◆
◆
◆
❿ll to start playing the cassette
Seq.
played
Seq. etc.
2
etc.
❿ll button one more time to make still mode.
2
1
1
to advance frame by frame
F.ADV/STEP (
)
To return to normal playback, press ❿ll
.
◆
This DVD-VCR uses a standard indexing system (VISS). As
a result, it will recognize any indexes marked by other
VCRs using the same system and vice versa.
◆
Vertical stability: When playing back frame by frame,
interference may be seen on the screen. Press the TRK
(
,
) buttons to minimize this effect.
Go to 0:00:00 Stop
Use this feature when you want to search for the 0:00:00 counter position
on a cassette. Press the CLEAR button at the point on the tape where you
want to set the counter to 0:00:00.
The VCR will rewind or fast forward, searching for the 0:00:00 counter
position, and then automatically stop at that position.
1
After pressing the SEARCH, press the corresponding
buttons, until the GoTo(0:00:00)option is selected.
ꢀ
or ❷
VCR
Playing a Sequence at Variable Speeds
2
Press the OK or
❿.
You can vary the playback speed using the Shuttle function (up to
nine times the normal speed).
Example: You wish to analyze a sportsperson’s technique,
movement by movement.
The Shuttle function is available on the Remote control
End Search
Use this feature when you want to search for a blank position to record a
program on a cassette.
The VCR will fast forward, searching for a blank position, and then
automatically stop at that position.If the VCR reaches the end of the tape
during end search, the tape will be ejected.
◆
No sound is heard when playing a sequence at variable
speeds.
1
2
Press:
1
1
◆
◆
◆
❿ll during playback
SHUTTLE (<<) to play the cassette backwards
SHUTTLE (>>) to play the cassette forwards
1
After pressing the SEARCH, press the corresponding
buttons, until the EndSearchoption is selected.
ꢀ
or ❷
2
Press the OK or
❿.
Each time you press a SHUTTLE button, the speed is changed
as shown in the following illustration.
REVERSE REVERSE REVERSE
SLOW
MOTION MOTION
X1/10 X1/5
SLOW
PLAY
X3
PLAY
X5
PLAY
X9
PLAY
X9
PLAY
X5
PLAY
X3
STILL
PLAY
38
39
Download from Www.Somanuals.com. All Manuals Search And Download.
VCR
VCR
Using the Tape Counter
Searching for a Specific Sequence
Intro Scan
The tape counter:
◆ Indicates the elapsed time in the play and record
modes (hours, minutes and seconds)
◆ Is reset when a cassette is inserted in the DVD-VCR
1
After pressing the SEARCH, press the corresponding
buttons, until the Intro Scanoption is selected.
ꢀ
or
❷
GB
GB
2
3
Press the OK or ❿ꢁ.
◆ Allows you to find the beginning of a sequence easily
Press the ➛➛
❿❿
buttons depending on the direction
or
where your desired programme is located.
0:00:00
◆
If the remaining time is to be calculated correctly, you
must indicate the type of cassette being used.
4
5
When an Index mark is found the DVD-VCR will playback the
tape for 5 seconds, after which it will continue searching for the
next Index mark.
1
2
Insert a cassette in your DVD-VCR.
To set the tape counter to zero at the beginning of a sequence:
If you want to watch the tape from a particular Index, simply
◆
◆
Press INFO. twice to display the counter
Press CLEAR when you want to set the tape counter to
zero
2
press
❿
II
.
INTRO SCAN
:
3
When you are ready,
◆
◆
◆
Start playback or Recording.
Press the button.
To fast-froward or rewind to the sequence at which the
counter was set to zero, press ➛➛ or ❿❿
◆
Index Skip Search:
This feature will enable you to fast forward/rewind to a specific
point on a tape: E.g. if you have recorded 3 different
programmes on a tape and you have rewound the tape to the
beginning, by using this feature you can go directly to the start of
programme 2 simply by pressing the SEARCH button.
.
◆
Some DVD-VCR information, such as the counter, can
be displayed on the television screen (unless you have
deactivated the Screen messages mode; refer to page 27).
INDEX SEARCH
:
-
6
1
After pressing the SEARCH, press the corresponding
buttons, until the Intro Scan option is selected.
ꢀ
or
❷
Press INFO.:
◆
Once to display the current function, programme
number, recording speed, date, time and counter
2
3
Press the OK or ❿ꢁ.
◆
◆
Twice to display the counter only
Three times to display the time remaining on the
cassette
Press the ➛➛
❿❿
buttons twice more. This will take
or
you directly to the start of the desired programme is located.
◆
Four times to clear the display
4
5
These Index searches can be made forwards: (press ❿❿) or
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
backwards: (press ➛➛). (➛➛ -20
0
+20 ❿❿✌
To cancel an Index search simply press the
❿
II
or button.
◆
3
3
40
41
Download from Www.Somanuals.com. All Manuals Search And Download.
VCR
VCR
Using the Assemble Edit Function
Connecting an RCA Audio/Video Input Cable
This function allows you to start a new recording at a specific
position on the cassette while maintaining a very smooth scene
change.
You can connect other audio/video equipment to your DVD-VCR
using audio/video cables if the appropriate outputs are available
on the equipment chosen.
4
AUX
1
2
3
Insert the cassette to be edited in your DVD-VCR.
GB
GB
Press the ❿ll button to start playback.
Examples: ◆ You wish to copy a video cassette with the help of
When you reach the position from which you wish to start the
a second VCR (see page 43).
1
2
new recording, press the ❿ll button.
◆ You wish to play back and/or copy pictures taken
with a camcorder (see page 43).
4
Press the
(
) button again as often as
F.ADV/STEP
necessary to advance frame by frame, until the exact recording
position is located.
◆
◆ Make sure that both the television and the DVD-
VCR are switched off before connecting the cables.
OK
5
6
While the DVD-VCR is in still mode, hold the REC button (
down for a while to activate the Assemble Edit function.
)
◆
5
AUX
1
2
3
Connect one end of the RCA audio/video cable into the VIDEO
INPUT socket on the front of the DVD-VCR.
Select the source from which you wish to record by pressing:
◆
◆
The PROG ( or ) buttons for television channels
The INPUT SEL. button for the AV1, AV2 or AUX input
sources
3
3
Plug the other end of the audio/video cable into the appropriate
output connector on the other system (VCR or camcorder).
7
8
Press the ❿ll button to start recording.
Connect one end of the RCA audio cable supplied into the
AUDIO INPUT sockets on the front of the DVD-VCR.
When you have finished recording, press
.
◆
◆
Take care to respect the colour coding of the left and right
channels.
4
Plug the other end of the audio cable into the appropriate output
connectors on the other system (VCR, camcorder or Hi-Fi sound
system).
VCR
Recoding from Another VCR or Camcorder
You can copy a cassette to your DVD-VCR from another video
source, such as another VCR or a camcorder.
◆
It is an infringement of copyright laws to copy
prerecorded cassettes or to re-record them in any form
without the permission of the owners of the
corresponding copyright.
1
Connect the DVD-VCR, from which the cassette is to be copied,
to the appropriate SCART audio and video input connectors on
the rear of your DVD-VCR, as indicated on page 11.
2
2
3
Insert a blank cassette in your DVD-VCR.
Insert the pre-recorded cassette in the other video source (VCR
or camcorder).
4
Press the INPUT SEL. button to select the appropriate input on
your DVD-VCR:
7
◆
◆
AV1, AV2 for the SCART input
AUX for the RCA input
5
6
Start playing back the cassette to be copied.
OK
Hold REC ( ) down for a while to start recording on your
◆
DVD-VCR.
6
7
When you have finished recording, press
DVD-VCR.
on both VCR and
◆
◆
If you wish to view the cassette being copied:
◆
Your DVD-VCR must be connected as usual to the
television (see page 11 for further details)
42
43
Download from Www.Somanuals.com. All Manuals Search And Download.
VCR
DVD
Using the TV Buttons on the Remote Control
Choosing a Connection
Your DVD-VCR remote control will work with Samsung
televisions and compatible brands.
The following show examples of connections commonly used to connect the DVD -VCR player with
a TV and other components. It is only available for DVD. The VCR out can not watch by this
connection.
STANDBY/ON
OPEN/CLOSE
To determine whether your television is compatible, follow the
instructions below.
1
GB
GB
1
2
3
Switch your television on.
2
Point the remote control towards the television.
Connection to an Audio System
Connection to an Television
Television
2
Hold down the TV button and enter the two-figure code
corresponding to the brand of your television, by pressing the
appropriate numeric buttons.
Brand
Codes
Brand
Codes
4
SAMSUNG
AKAI
GRUNDIG
LOEWE
01 to 06
09, 23
09, 17, 21
02
PHILIPS
SABA
SONY
THOMSON
TOSHIBA
02, 20, 22
13, 14, 22 to 24
15, 16
3
Dolby Digital Decoder
Digital Audio Input Jack
13, 14, 24
07, 16 to 19, 21
4
PANASONIC
08, 23 to 27
COAXIAL
OPTICAL
Result: If your television is compatible with the remote control,
it will switch off. It is now programmed to operate with
the remote control.
◆
If several codes are indicated for your television brand,
try each one in turn until you find one that works.
5
◆
When you change the batteries in the remote control,
you must reprogramme the code, following the same
procedure.
5
or
You can then control the television using the following buttons.
Button
Function
STANDBY/ON
Used to switch the television and DVD-VCR on and off.
Used to switch between the TV and VCR modes.
Used to select an external source.
Used to adjust the volume of the television.
Used to select the required programme.
◆
DIGITAL AUDIO OUT
TV or VCR
◆
6
OPTICAL
COAXIAL
DVD-VCR
INPUT SEL.
◆
VOL
+
or
–
◆
◆
Digital Audio out
Jack
S-Video
Jack
PROG/TRK
or
(
)
TV MUTE
◆
Used to mute the volume of the television.
The various functions will not necessarily work on all
televisions. If you encounter problems, operate the
television directly.
◆
44
45
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD
DVD
Setting Up the Language Features
Setting Up the Language Features
Language Setup
If you set the player menu, disc menu, audio and subtitle language
in advance, they will come up automatically every time you watch
a movie.
Using the Audio Language
Disc Menu
Audio
:
:
:
English
English
Subtitle
Automatic
GB
GB
1
With the unit in Stop mode, press the MENU button.
Select DVD using buttons, then OK or button.
Select Language Setup using buttons, then press the OK
or button.
Using the Disc Menu Language
Setup
Setup
Display Setup
Setup
2
3
ꢀ,
❷
❿
ꢀ,❷
:
This function changes the text language only on the disc
menu screens.
❿
4
5
Select Audio using
ꢀ,
❷
buttons, then press the OK or
❿
button.
1
With the unit in Stop mode, press the MENU button.
Press the
ꢀ,
❷
buttons to select ‘English’ .
2
3
Select DVD using
Select Language Setup using
OK or button.
ꢀ
,
❷
buttons, then OK or
❿
button
- Select “Original” if you want the default soundtrack language to
be the original language the disc is recorded in.
- Select “Others” if the language you want is not listed.
ꢀ,❷
buttons, then press the
❿
Language Setup
English
6
Press the OK button.
- English is selected and the screen returns to DVD menu.
4
5
6
Select Disc Menu using
ꢀ,
❷
buttons, then press the OK or
❿
Disc Menu
:
:
:
Audio
English
button.
Subtitle
Automatic
Use the
ꢀ,
❷
buttons to select ‘English’.
- Select “Others” if the language you want is not listed.
Press the OK button.
- English is selected and the screen returns to DVD menu.
Using the Subtitle Language
Setup
Setup
Display Setup
Setup
:
1
2
3
With the unit in Stop mode, press the MENU button.
Disc Menu Language
Select DVD using
ꢀ,
❷
buttons, then OK or
❿
button.
Disc Menu
Select Language Setup using
ꢀ,❷
buttons, then press the OK
or ❿ꢁbutton.
4
5
Select Subtitle using
button.
ꢀ
,
❷
buttons, then press the OK or
❿
Language Setup
Disc Menu
:
:
:
English
Audio
English
Use the
ꢀ,
❷
buttons to select ‘English’.
Subtitle
Automatic
- Select “Automatic” if you want the subtitle language to be the
same as the language selected as the audio preference.
- Select “Others” if the language you want is not listed.
Some discs may not contain the language you
select as your initial language; in that case the disc will use its
original language setting.
6
Press the OK button.
- English is selected and the screen returns to DVD menu.
Subtitle Language
Automatic
Subtitle
46
47
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD
DVD
Setting Up the Display Options
Setting Up the Audio Options
1
With the unit in Stop mode, press the MENU button.
Select DVD using buttons, then OK or button.
1
2
With the unit in Stop mode, press the MENU button.
Select DVD using buttons, then OK or button.
Setup
Setup
Display Setup
Setup
ꢀ,
❷
❿
2
3
ꢀ,
❷
❿
Setup
Setup
Display Setup
Setup
:
3
Select Audio Setup using
button.
ꢀ
,
❷
buttons, then press the OK or
Select Display Setup using
button.
ꢀ,
❷
buttons, then press the OK or
GB
GB
❿
❿
:
4
Use the
Then press the OK or
ꢀ
,
❷
buttons to select the desired item.
4
Use the
OK or ❿ꢁ button.
ꢀ
,
❷
buttons to select the desired item. Then press the
❿
button.
•
TV Aspect
•
Dolby Digital Out
1. PCM:
Depending on the type of television you have, you may want to adjust
the screen setting (aspect ratio).
1. 4:3 L-Box :
Select when you want to see the total 16:9 ratio screen DVD supplies,
even though you have a TV with a 4:3 ratio screen. Black bars will
appear at the top and bottom of the screen.
2. 4:3 Pan-Scan :
Converts to PCM(2CH) audio.
Select PCM when using the Analog Audio Outputs.
Display Setup
4:3 L-Box
2. Bitstream :
Converts to Dolby Digital Bitstream (5.1CH).
Select Bitstream when using the Digital Audio Output.
TV Aspect
:
Black Level
NTSC Disc Output
DVD Out
:
:
PAL 60Hz
RGB
Select this for conventional size TVs when you want to see the central
portion of the 16:9 screen. (Extreme left and right side of movie
picture will be cut off.)
Dolby Digital Out
MPEG-2 Digital Out
DTS
➢
•
Be sure to select the correct Digital Output or no audio will be
heard.
3. 16:9 Wide :
You can view the full 16:9 picture on your widescreen TV.
•
MPEG-2 Digital Out
PCM Down Sampling
1. PCM : Converts to PCM(2CH) audio.
Select PCM when using the Analog
Audio Outputs.
•
•
Black Level
Adjusts the brightness of the screen.(On/Off)
NTSC Disc Output
“NTSC” if the screen only has one NTSC-video entrance. If this is not
the case, you can choose to leave “ PAL 60Hz” as is.
2. Bitstream : Converts to MPEG-2 Digital Bitstream
(5.1CH or 7.1CH).Select Bitstream when using the
Digital Audio Output.
•
DVD Out
1. RGB: Sends RGB signal from the AV JACK(SCART terminal).
2. S-Video: Sends S-VIDEO signal from the AV JACK(SCART terminal).
3. Video: Sends COMPOSITE VIDEO signal from the AV
JACK(SCART terminal).
• DTS
1. Off : Doesn’t output digital signal.
2. On : Outputs DTS Bitstream via digital output only.
Select DTS when connecting to a DTS Decoder.
•
•
Dynamic Compression
1. On
2. Off
:
:
To select dynamic compression.
To select the standard range.
PCM Down Sampling
1. On : Select this when the amplifier connected to the player is not
96KHz compatible.
In this case, the 96KHz signals will be down converted to
48KHZ.
2. Off : Select this when the amplifier connected to the player is
96KHz compatible.
In this case, all signals will be output without any changes.
➢
•
How to make the SETUP menu disappear or return to menu screen during set up;
Press RETURN or button.
❿
• Manufactured under license from Dolby Laboratories.
“Dolby” and the double-D symbol are trademarks of Dolby Laboratories.
• “DTS” and “DTS Digital Out” are trademarks of Digital Theater Systems, Inc.
48
49
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD
DVD
Setting Up the Parental Control
A/V Receiver Connections
To take full advantage of the movie theater experience that DVD
offers, you may want to connect your DVD-VCR to a complete
Surround Sound system, including an A/V Receiver and six
Surround Sound speakers.
The Parental Control function works in conjunction with DVDs
that have been assigned a rating - which helps you control the
types of DVDs that your family watches.
LINE OUT
L
Setup
Setup
Display Setup
Setup
AUDIO
DIGITAL AUDIO OUT
OPTICAL
:
S-VIDEO OUT
GB
GB
There are up to 8 rating levels on a disc.
R
COAXIAL
Before You Begin...
.
.
1
2
With the unit in Stop mode, press the MENU button.
Select DVD using buttons, then OK or button.
OR
To Digital Audio Input of an A/V
Receiver with a Dolby Digital
Decoder
•
If your A/V receiver is equipped with a Dolby Digital
Decoder, you have the option to bypass the DVD-VCR’s built-
in Dolby Digital Decoder. Use the DIGITAL AUDIO OUT
connection below.
ꢀ,
❷
❿
3
Select Parental Setup using
or button.
ꢀ,
❷
buttons, then press the OK
❿
Parental Setup
No
Yes
4
Use OK or
The Ok Password screen appears.
❿
to select Yes if you want to use a password.
Use Password
:
No
1
Digital Audio Out
Connect EITHER an optical cable OR a digital coaxial cable from
the DIGITAL AUDIO OUT jacks on the back panel of the DVD-
VCR to their corresponding Digital Audio Input jacks on your A/V
Receiver:
5
Ok your password. The Re-Enter Password
screen appears to confirm the password.
Ok your password again. The Parental Control screen appears.
•
•
•
Optical
Coaxial
•
About the Rating Level ;
The Rating Level will work only when Use Password is set to
Use whichever connection is available on your A/V Receiver.
Yes. To unlock the player, use
to select Rating
Level. Press OK.
- Use to select the level(e.g. Level 6) and press OK.
Discs that contain Level 7 will now not play.
ꢀ,
❷
to select No. Use OK or
❿
ꢀ,❷
- To cancel the rating level, use OK or
Password.
❿
to select No in Use
•
About the Change Password ;
~
- Use
ꢀ,
❷
to select Change Password.
Press OK. The Change Password screen appears.
- Ok your new password. Re-Enter the new password again.
Yes
•
How to make the SETUP menu disappear or return to menu
➢➢
Press RETURN or
➛
button.
screen during set up;
• If you have forgotten your password, see Forget Password in
the Troubleshooting Guide.
50
51
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD
Adjusting the Aspect Ratio (EZ View)
To play back using aspect ratio (DVD)
GB
1
Press the EZ VIEW button.
•
•
•
The screen size changes when the button is pressed repeatedly.
The screen zoom mode operates differently depending on the screen setting in the initial DVD menu.
To ensure correct operation of the EZ VIEW button, you should set the correct aspect ratio in the
initial setup (See page 49).
If you are using a 16:9 TV
For 16:9 aspect ratio discs
• Wide Screen
Displays the content of the DVD title in 16:9 aspect ratio.
• Screen Fit
The top and bottom of the screen are cut off. When playing a
2.35:1 aspect ratio disc, the black bars at the top and bottom of the screen will disappear. The picture will look
vertically stretched. (Depending on the type of disc, the black bars may not disappear completely.)
• Zoom Fit
The top, bottom, left and right of the screen are cut off and the central portion of the screen is enlarged.
For 4:3 aspect ratio discs
• Normal Wide
Displays the content of the DVD title in 16:9 aspect ratio. The picture will look horizontally stretched.
• Screen Fit
The top and bottom of the screen are cut off and the full screen appears. The picture will look vertically stretched.
• Zoom Fit
The top, bottom, left and right of the screen are cut off and the central portion of the screen is enlarged.
• Vertical Fit
When a 4:3 DVD is viewed on a 16:9 TV, black bars will appear at the left and right of the screen in order to
prevent the picture from looking horizontally stretched.
53
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD
DVD
Adjusting the Aspect Ratio (EZ View)
Using the Display Function
When Playing a DVD/CD
If you are using a 4:3 TV
1
GB
GB
1
During play, press the INFO. button on the remote.
2
3
Use the
Use the
ꢀ
,
❷
buttons to select the desired item.
For 16:9 aspect ratio discs
OK
• 4:3 Letter Box
➛
,
❿
buttons to make the desired setup.
• You may use the number buttons of the remote control to
directly access a title, chapter or to start the playback from the
desired time.
Displays the content of the DVD title in 16:9 aspect ratio.
The black bars will appear at the top and bottom of the screen.
• 4:3 Pan Scan
4
To make the screen disappear, press the INFO. button again.
The left and right of the screen are cut off and displays the central portion of the 16:9 screen.
• Screen Fit
The top and bottom of the screen are cut off and the full screen appears. The picture will look vertically
stretched.
➢
• What is a Chapter?
Each Title on a DVD is usually divided into chapters (similar to
tracks on an audio CD).
• Zoom Fit
When a 4:3 DVD is viewed on a 16:9 TV, black bars will appear at the left and right of the screen in order to
prevent the picture from looking horizontally stretched.
• What is a Title?
A DVD may contain several different titles. For example, if a
disc contains four different movies, each might be considered a
title.
For 4:3 aspect ratio discs
• Normal Screen
ENG 5.1CH
ENG
Displays the content of the DVD title in 4:3 aspect ratio.
To access the desired title when there is more than one in the
disc. For example, if there is more than one movie on a DVD,
each movie will be identified.
TITLE
• Screen Fit
Off
The top and bottom of the screen are cut off and the full screen appears. The picture would look vertically
stretched.
Most of DVD discs are recorded in chapters so that you can
quickly find a specific passage.
CHAPTER
TIME
• Zoom Fit
Allows playback of the film from a desired time.
You must ok the starting time as a reference.
The top, bottom, left and right of the screen are cut off and the central portion of the screen is enlarged.
Refers to the language of the film soundtrack. In the example,
the soundtrack is played in English 5.1CH. A DVD disc can
have up to eight different soundtracks.
AUDIO
➢
• This function may behave differently depending on the type of disc.
ENG 5.1CH
ENG
Refers to the subtitle languages available in the disc.
You will be able to choose the subtitles language or,
if you prefer, turn them off from the screen.
Off
SUBTITLE
3D SOUND
A DVD disc can have up to 32 different subtitles.
A surround sound effect is generated using only two front
speakers.
ENG 5.1CH
ENG
Off
~
54
55
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD
DVD
Changing the Camera Angle
Repeat Play
Repeat the current track, chapter, title, a chosen section (A-B), or
all of the disc.
OK
Using the ANGLE button
OK
GB
GB
When a DVD contains multiple angles of a particular scene, you
can select the Angle function.
When playing a DVD
2
Press the ANGLE button to see if an ANGLE
1
(
) mark is present at the upper left hand corner of the
1
2
Press the REPEAT button on the remote.
Repeat screen appears.
screen.
Select Chapter, Title or A-B using the
➛
,
❿
buttons.
1
When an ANGLE mark is shown, press the ANGLE button, then
an ANGLE select icon will appear at the upper left hand corner
of the screen.
DVD
REPEAT A-B button
-
Press the REPEAT button. Select A-B on screen with the
buttons or press the 'REPEAT A-B' button on the remote.
➛
,
❿
Chapter Title A - B
Off
•
2
3
Use the
➛
,
❿
buttons to select the desired screen angle.
Press OK at the point where you want the repeat play to start (A).
The B is automatically highlighted.
•
To turn off the display, press the ANGLE button again.
Press OK at the point where you want the repeat play to stop (B).
•
•
To terminate the function, press the 'CLEAR' button or the
'REPEAT A-B' button again.
A-B REPEAT does not allow you to set point (B) until at least 5
seconds has elapsed after point (A) has been set.
•
CD
DVD
Selecting the Subtitle Language
Track Disc A - B
Off
3
4
Press OK.
To return to normal play, press REPEAT again, then press the
You can select a desired subtitle quickly and easily with the
subtitle button.
➛
,
❿
buttons to select Off and press OK.
•
It is available to press CLEAR button on the remote controller in
order to stop REPEAT play.
Using the SUBTITLE button
1
1
2
3
Press the SUBTITLE button.
OK
Use the
Use the
➛
,
❿
buttons to select the desired subtitle language.
buttons to determine whether or not the subtitle
ꢀ
,❷
will be displayed.
ENG
On
• Initially, the subtitling will not appear on screen.
• The subtitle languages are represented by abbreviations.
➢
• This function depends on what languages are encoded
on the disc and may not work with all DVDs.
• A DVD disc can contain up to 32 subtitle languages.
•
How to have the same subtitle language come up
Refer to “Setting Up the
ENG
Off
wheneveryou play a DVD;
Language Features” on page 47.
56
57
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD
DVD
Selecting the Audio Language
Using the Mark Function
You can select a desired language quickly and easily with the
AUDIO button.
This feature lets you bookmark sections of a DVD so you can
quickly find them at a later time.
DVD
OK
Using the Mark Function (DVD)
GB
Using the AUDIO button
GB
1
During play, press the MARK button on the remote. The Mark
icons will be displayed.
1
1
2
Press the AUDIO button.
2
3
Use the
➛
,
❿
buttons to move to the desired Mark icon.
Use the
➛
,
❿
buttons to select the desired language on a DVD.
- The audio languages are represented by abbreviations.
When you reach the scene you want to mark, press the OK
button. The icon will change to a number (1, 2, or 3).
CD
3
Use the
➛
,
❿
buttons to select Stereo,
➛
or ❿ꢁ (On CD)
4
Press the MARK button to turn off the display.
➢
• This function depends on what languages are encoded on the
disc and may not work with all DVDs.
• A DVD disc can contain up to 8 audio languages.
Recalling a Marked Scene
•
How to have the same audio language come up whenever you
Refer to “Setting Up the Language Features” on
play a DVD ;
page 47.
1
2
During play, press the MARK button on the remote.
Use the
➛
,
❿
buttons to select a marked scene.
CLEAR
1
–
–
3
Press the PLAY/STILL (❿ll ) buttons to skip to the marked
scene.
Clearing a Mark
1
2
During play, press the MARK button on the remote.
Use the
delete.
➛
,
❿
buttons to select the mark number you want to
3
Press the CLEAR button to delete a mark number.
Press the MARK button to turn off the display.
➢
• Up to three scenes may be marked at a time.
• Depending on the disc, the mark function may not work.
58
59
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD
MP3/WMA Play
MP3/WMA Play
When an MP3/WMA Disc is inserted into the DVD player, the first
song file of the first folder plays.
CD-R MP3/WMA discs
•
•
•
If more than two file extensions are present, select the media of
your choice.
When playing CD-R/MP3 or WMA discs, please follow all the recommendations for CD-R above, plus the
comments below:
GB
GB
To change the currently playing media, press the STOP (
button twice and then press the MENU button.
)
➢➢
• Your MP3 or WMA files should be ISO 9660 or JOLIET format.
If no button on the remote controller is pressed for 60 seconds, the
menu will disappear and the selected item will be played.
ISO 9660 format and Joliet MP3 or WMA files are compatible with Microsoft's DOS and Windows, and with
Apple's Mac. These two formats are the most widely used.
MP3/WMA Play Function
• When naming your MP3 or WMA files do not exceed 8 characters, and place ".mp3, .wma" as the file
extension.
General name format of: Title.mp3. or Title.wma. When composing your title, make sure that you use 8 characters
or less, have no spaces in the name, and avoid the use of special characters including: (.,/,\,=,+).
1
2
When the first song file is playing, the music folder menu will
appear on the right side of the screen.
Up to 8 music folders can be displayed at a time. If you have
• Use a decompression transfer rate of at least 128 Kbps when recording MP3 files.
Sound quality with MP3 files basically depends on the rate of compression/decompression you choose. Getting
audio CD quality sound requires an analog/digital sampling rate, that is conversion to MP3 format, of at least 128
Kbps and up to 160 Kbps. However, choosing higher rates, like 192 Kbps or more, only rarely give better sound
quality.
more than 8 folders on a disc, press the
them up on the screen.
➛
,
❿
buttons to bring
Use the
ꢀ,
❷
buttons to select the desired music folder, then
press OK.
Use the
ꢀ
,
❷
buttons again to select a song file. Press OK to
begin playback of the song file.
Conversely, files with decompression rates below 128 Kbps will not be played properly.
• Use a decompression transfer rate of at least 64Kbps when recording WMA files.
Sound quality with WMA files basically depends on the rate of compression/decompression you choose. Getting
audio CD quality sound requires an analog/digital sampling rate, that is conversion to WMA format, of at least
64Kbps and up to 192Kbps.
PROGRAM
RANDOM
Program/Random playback
Conversely, files with decompression rates below 64Kbps or over 192Kbps will not be played properly.
1
Press the MODE button in STOP mode to switch between
the RANDOM and PROGRAM modes.
• Do not try recording copyright protected MP3 files.
Certain "securized" files are encrypted and code protected to prevent illegal copying. These files are of the
following types: Windows MediaTM (registered trade mark of Microsoft Inc) and SDMITM (registered trade mark of
The SDMI Foundation). You cannot copy such files.
➢
•
Press the REPEAT button in STOP mode to hear only music
continuously and press it once again to release.
• PROGRAM/RANDOM playback cannot be used if the
disc contains more than two types of file extensions.
• Important: The above recommendations cannot be taken as a guarantee that the DVD player will play MP3
recordings, or as an assurance of sound quality.
You should note that certain technologies and methods for MP3 file recording on CD-Rs prevent
optimal playback of these files on your DVD player (degraded sound quality and in some cases,
inability of the player to read the files).
• This unit can play a maximum of 500 files and 300 folders per disc.
60
61
Download from Www.Somanuals.com. All Manuals Search And Download.
Program Play & Random Play
Picture CD Playback
•
•
Select JPEG in the menu to view a Photo CD.
To change the currently playing media, press the STOP (
)
➢
Program Play (CD/MP3/WMA)
button twice and then press the DISC MENU button.
•
If no button on the remote controller is pressed for 60 seconds, the
menu will disappear and the selected item will be played.
PROGRAM
RANDOM
GB
GB
1
2
3
Press the MODE button.
Use the
ꢀ,
❷
buttons to select PROGRAM. Press the OK button.
1
2
Open the disc tray.
Use the
ꢀ,
❷ꢁ
/
➛
,
❿
buttons to select the first track to add to the
Load the disc on the tray.
Load the disc with the labeled side up.
program.
Press the OK button. The selection numbers appear in the
Program Order box.
3
Close the tray.
- The tray closes and you should get a screen that looks like
the one below.
4
Press the PLAY/STILL (
) button.
❿
II
PROGRAM 01
The disc will be played in programmed order.
• Use the
picture you want to view and then press the OK button. (Press the
PLAY/STILL ( ) button if you want to play it in the Slide Show mode.)
ꢀ
,
❷
or
➛
,
❿
buttons on the remote controller to select the
Album
Photo : 1 /215
Track
Program order
- - - - - - - -
- - - - - - - -
- - - - - - - -
- - - - - - - -
- - - - - - - -
01 02 03 04
05 06 07 08
09 10 11 12
13 14 15 16
❿
II
• To see the next 6 pictures, press the ❿❿
l
button.
➛➛ button.
Random Play (CD/MP3/WMA)
• To see the previous 6 pictures, press the
l
CLEAR
1
2
Press the MODE button.
•
•
: Return to the Album Screen.
Use the
➛
,
❿
buttons to select RANDOM. Press the OK button.
: Each time the OK button is pressed, the picture rotates 90
degrees clockwise.
The disc will be played in random order.
Photo : 1 /215
PROGRAM
RANDOM
•
•
: Each time the OK button is pressed, the picture is enlarged up
to 2X. (Normal ➢ 2X ➢ Normal)
➢
• Depending on the disc, the Program and Random Play
functions may not work.
: The unit enters slide show mode.
• To resume normal play, press the CLEAR button.
*Press the RETURN button to return to the album screen.
*Before the Slide Show can begin, the picture interval must be set.
• PROGRAM/RANDOM playback cannot be used if the disc
contains more than two types of file extensions.
•
•
•
: When this icon is selected and OK is pressed, the pictures
change automatically with about an 6 second interval.
• This unit can support a maximum of 99 programmed
order.
Timer :
: The pictures change automatically with about an 12 second
interval.
: The pictures change automatically with about an 18 second
interval.
*Depending on the file size, each interval between images may take
longer or shorter than the manual suggests.
➢
• When the banner is being appeared, press the RETURN button to return to the album screen.
• If no buttons on the remote controller pressed for 10 seconds, the menu will disappear.
Press the
ꢀ,
❷
or
➛
,
❿
buttons on the remote controller to display the menu again.
62
63
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD
Picture CD Playback
Technical Specifications
CD-R JPEG Discs
Rated voltage
Power consumption
Weight
AC 220 - 240V, 50Hz
GB
GB
23 Watts
• Only files with the ".jpg" and ".JPG" extensions can be played.
3.9 Kg
• If the disc is not closed, it will take longer to start playing and not all of the recorded files may be played.
• Only CD-R discs with JPEG files in ISO 9660 or Joliet format can be played.
• The name of the JPEG file may not be longer than 8 characters and should contain no blank spaces or special
characters (. / = +).
General
Size
430mm X 282mm X 84mm
+5°C ~ +35°C
Operating ambient temperature
Installation conditions
Operation position : Horizontal,
Relative humidity : Below 75%
Euro Scart socket : 1.0Vp-p (unbalanced) 75Ω
Euro Scart socket : -8dBm, 47Kohm unbalanced
UHF 21-69 (Initial CH36)
RCA jack, Euro Scart socket
Digital audio out (OPTICAL, COAXIAL, RCA jack)
RCA jack, Euro Scart socket
S-Video out
Video input (Rear)
Audio input (Rear)
RF out
Input
• Only a consecutively written multisession disc can be played. If there is a blank segment in the multisession disc,
the disc can be played only up to the blank segment.
• A maximum of 500 images can be stored on a single CD.
Audio (DVD, VCR)
Audio (DVD only)
Video (DVD, VCR)
Video (DVD only)
Output
• Only Kodak Picture CDs can be played.
• When playing a Kodak Picture CD, only the JPEG files in the pictures folder can be played.
• Picture discs other than Kodak Picture CD may take longer to start playing or may not play at all.
• If a number of files in 1 Disc is over 500, only 500 JPEG file can be played.
• If a number of folders in 1 Disc is over 300, only JPEG files in 300 folders can be played.
RGB out : Euro Scart socket
VHS type video tape,
Tape format
S-VHS type video tape (Playback only)
PAL, MESECAM, NTSC4.43, NTSC playback on PAL TV
B/G, D/K
Color system
Tuning system
Video S/N
VCR
DVD
Above 43dB (standard recording)
Above 240 lines (standard recording)
Above 68dB (Hi-Fi), 39dB (Mono)
20Hz - 20KHz (Hi-Fi)
Resolution
Audio S/N
Audio frequency characteristics
Disc
DVD, CD (12cm), CD (8cm)
95dB
Audio S/N
Audio dynamic range
105dB
64
65
Download from Www.Somanuals.com. All Manuals Search And Download.
Problems and Solutions (VCR)
Troubleshooting Guide (DVD)
Before contacting the Samsung after-sales service, perform the following simple checks.
Before requesting service (troubleshooting)
Problem
Explanation/Solution
No power
➢
➢
Check that the power plug is connected to a wall outlet.
Have you pressed the STANDBY/ON button?
GB
GB
Problem
Action
Page
➢ Ensure that the disc is installed with the label side facing up.
➢ Check the region number of the DVD.
➢ This player cannot play CD-ROMs, DVD-ROMs, etc. Insert a DVD, a
CD.
You cannot insert a video cassette
➢
A video cassette can only be inserted with the window
side up and the safety tab facing you.
Disc does not play.
P6
The television programme was not recorded
➢
➢
➢
Check the DVD-VCR aerial connections.
Is the DVD-VCR tuner properly set?
Check if the safety tab is intact on the cassette.
➢ 5.1 channel sound is reproduced only when the following conditions
are met. :
1) The DVD-VCR player is connected with the proper amplifier
2) The disc is recorded with 5.1 channel sound.
➢ Check whether the disc being played has the “Dolby 5.1 ch” mark on
the outside.
Timer recording was unsuccessful
➢
➢
➢
Was the STANDBY/ON button pressed to activate the timer?
Re-check the recording start/stop time settings.
If there was a power failure or interruption during timer
recording, the recording will have been cancelled.
5.1 channel sound is not
being reproduced.
P45
P48
No playback picture or the picture
is distorted
➢
➢
Check to see if you are using a prerecorded tape.
➢ Check if your audio system is connected and working properly.
➢ The features or action cannot be completed at this time because:
1. The DVD’s software restricts it.
2. The DVD’s software doesn’t support the feature (e.g., angles).
3. The feature is not available at the moment.
4. You’ve requested a title or chapter number or search time that is
out of range.
You cannot see normal broadcasts
Check the TUNER/EXTERNAL setting. It should be on
TUNER.
Check the TV/VCR aerial connections.
The
screen.
icon appears on
P46-64
P46-50
➢
➢
➢
Noise bars or streaks on playback
Press the TRK
(
or ) buttons to minimize this effect.
When the
during playback, the still picture
❿
button is pressed
A still picture may have “noise bars”, depending on the
II
condition of the tape. Press the TRK or ) buttons
(
Playback mode differs from ➢ Some of the functions selected in the Setup Menu may not work
has severe “noise bars” streaks
during SLOW motion to minimize this effect.
the Setup Menu selection.
properly if the disc is not encoded with the corresponding function.
Video Head Cleaning
➢
If poor pictures appear on a variety of cassettes, the video
heads may need cleaning. This is not a common problem
and unless it appears, the heads should not be cleaned.
When cleaning the video heads, read all instructions
provided with the head cleaning cassette. Incorrect head
cleaning can permanently damage the video heads.
The screen ratio cannot be
changed.
➢ The Screen Ratio is fixed on your DVDs.
P49
P48
➢ Make sure you have selected the correct Digital Output in the Audio
Options Menu.
No audio.
If when tuning in your TV to the DVD-VCR
TV does not find the Screen
1. Remove the aerial input plug from the socket marked (aerial
symbol) on the rear of the DVD-VCR.
2. Carry out the instructions “Tuning Your Television for the DVD-
VCR” (see page 14).
3. Carry out the instructions “Setting the DVD-VCR output
Channel” (see page 23), move the channel number
several channels down from the original setting.
(example: from 36 to 39).
4. Replace the aerial plug into the socket marked (aerial symbol)
on the rear of the DVD-VCR.
5. Re-tune your TV to the DVD-VCR again by following
instructions “Tuning Your Television for the DVD-VCR”
(page 14).
6. If the problem still exists repeat steps 1 to 5 moving several
more channels away from the original setting.
➢ Press power on from a cold start with no disc in the unit. Press the
❿❿ and ➛➛ buttons simultaneously on the front panel for five
seconds. Switch off and on the DVD-VCR by pressing
STANDBY/ON button. The Parental Mode is now unlocked as
indicated on the display. You can now set your rating level and
change your password to a new number.
Forgot password
or the pattern when found suffers
from interference, it may be due to the
DVD-VCR output channel clashing with
the normal TV transmissions in your area.
To prevent this you will need to change the
DVD-VCR output channel in the following
way
➢ Go to the contents and find the section of the instruction book that
contains the explanations regarding the current problem, and follow
the procedure once again.
➢ If the problem still cannot be solved, please contact your nearest
authorized service center.
If you experience other
problems.
If you are unable to solve the problem after reading the above instructions, note:
➢ The model and serial number on the rear of your DVD-VCR
➢ The warranty information
➢ A clear description of the problem
Then contact your nearest SAMSUNG after-sales service.
66
67
Download from Www.Somanuals.com. All Manuals Search And Download.
SAMSUNG EUROPEAN BLOC WARRANTY
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
THIS APPLIANCE IS DISTRIBUTED BY
A készüléket forgalomba hozta
ELECTRONICS
AK68-00278A
Download from Www.Somanuals.com. All Manuals Search And Download.
|