Instruction Manual
DVD-R157
AK68-01315A-02
Download from Www.Somanuals.com. All Manuals Search And Download.
• Exterior interference such as lightning and static
electricity can affect normal operation of this recorder.
If this occurs, turn the recorder off and on again with the
POWER button, or disconnect and then reconnect the
AC power cord to the AC power outlet.
Precaution
▌Important Safety Instructions
The recorder will operate normally.
• Be sure to remove the disc and turn off the recorder after
use.
• Disconnect the AC power cord from the AC outlet when
you don’t intend to use the recorder for long periods of
time.
Read these operating instructions carefully before using
the unit. Follow all the safety instructions listed below.
Keep these operating instructions handy for future
reference.
1) Read these instructions.
• Clean the disc by wiping in a straight line from the inside
to the outside of the disc.
2) Keep these instructions.
3) Heed all warnings.
• Apparatus shall not be exposed to dripping or splashing
and no objects filled with liquids, such as vases, shall be
placed on the apparatus.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with a dry cloth.
• The Mains plug is used as a disconnect device and shall
stay readily operable at any time.
7) Do not block any ventilation openings, Install in
accordance with the manufacturer's instructions.
8) Do not install near any heat sources such as radiators,
heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
▌Maintenance of Cabinet
9) Do not defeat the safety purpose of the polarized or
grounding- type plug. A polarized plug has two blades
with one wider than the other. A groundingtype plug
has two blades and a third grounding prong. The wide
blade or the third prong is provided for your safety. If
the provided plug does not fit into your outlet, consult
an electrician for replacement of the obsolete outlet.
10) Protect the power cord from being walked on or
pinched particularly at plugs, convenience receptacles,
and the point where they exit from the apparatus.
11) Only use attachments/accessories specified by the
manufacturer.
For safety reasons, be sure to disconnect the AC power
cord from the AC outlet.
• Do not use benzene, thinner, or other solvents for
cleaning.
• Wipe the cabinet with a soft cloth.
▌Disc Handling
• Use discs with regular
shapes. If an irregular disc (a
disc with a special shape) is
used, this DVD Recorder may
be damaged.
12) Use only with the cart, stand, tripod,
bracket, or table specified by the
manufacturer, or sold with the
apparatus. When a cart is used,
use caution when moving the cart/
apparatus combination to avoid injury
Holding discs
• Avoid touching the surface of a disc
where recording is performed.
from tip-over.
DVD-RAM, DVD±RW and DVD±R
• Clean with an optional DVD-RAM/PD disc
cleaner . Do not use cleaners or cloths for
CDs to clean DVD-RAM/
13) Unplug this apparatus during lightning storms or when
unused for long periods of time.
14) Refer all servicing to qualified service personnel.
Service is required when the apparatus has been
damaged in any way, such as the power-supply cord
or plug is damaged, liquid has been spilled or objects
have fallen into the apparatus. Service is also required
if the apparatus has been exposed to rain or moisture,
does not operate normally, or has been dropped.
DVD±RW/DVD±R discs.
DVD-Video, Audio CD
• Wipe off dirt or contamination on the disc with a soft cloth.
Cautions on handling discs
• Do not write on the printed side with a ball-point pen or
pencil.
▌
Handling Cautions
• Do not use record cleaning sprays or antistatic. Also, do
not use volatile chemicals, such as benzene or thinner.
• Do not apply labels or stickers to discs. (Do not use discs
fixed with exposed tape adhesive or leftover peeled-off
stickers.)
• Do not use scratch-proof protectors or covers.
• Do not use discs printed with label printers available on
the market.
• Before connecting other components to this recorder, be
sure to turn them all off.
• Do not move the recorder while a disc is being played, or
the disc may be scratched or broken, and the recorder’s
internal parts may be damaged.
• Do not put a flower vase filled with water or any small
metal objects on the recorder.
• Be careful not to put your hand into the disc tray.
• Do not place anything other than the disc in the disc tray.
• Do not load warped or cracked discs.
English - 3
Download from Www.Somanuals.com. All Manuals Search And Download.
Using MPEG4 disc
ꢀ
▌
Disc Storage
• Disc : CD-R/-RW, DVD-RAM, DVD±R/ DVD±RW,
• MPEG4 File with following extensions can be played. :
.avi, .divx, .AVI, .DIVX
• MPEG4 Codec format : DivX 3.11 DivX 4.x DivX 5.x
• Available Audio Format : “MP3”, “MPEG”, “PCM”,“AC3”,
“DTS”
Be careful not to damage the disc because the data on
these discs are highly vulnerable to the environment.
• Do not keep under direct sunlight.
• Keep in a cool ventilated area.
• Store vertically.
• Keep in a clean protection jacket.
• Supported subtitle file formats: .smi, .srt, .sub, .psb,.txt
• If you move your DVD Recorder suddenly from a cold
place to a warm place, condensation may generate
on the operating parts including the lens and cause
abnormal disc playback. When this occurs, do not
connect the plug to the power outlet. Wait for two hours,
then insert the disc and try to playback again. It will work
properly when condensation has evaporated.
Using CD-R/-RW
ꢀ
• Use a 700MB(80 minutes) CD-R/-RW disc. If possible,
do not use a 800MB(90 minutes) or above disc, as the
disc may not play back.
• If the CD-R/-RW disc was not recorded as a closed
session, you may experience a delay in the early
playback time, and all recorded files may not play.
• Some CD-R/-RW discs may not be playable with this
unit, depending on the device which was used to burn
them.
▌Disc Specifications
DVD-Video
• When recording from CDs for your personal use to CD-
R/-RW discs, playability may vary depending on the
contents and discs.
• A digital versatile disc (DVD) can contain up to
135-minutes of images, 8-language audio and 32
subtitle languages. It is equipped with MPEG-2 picture
compression and Dolby 3D surround sound, allowing
you to enjoy vivid and clear theater quality images in the
comfort of your own home.
• When switching from the first layer to the second layer
of a double-layered DVD Video disc, there may be
momentary distortion in the image and sound. This is not
a malfunction of the unit.
DVD±R Disc Playback and Recording
• Once a DVD±R recorded is finalized, it is playable in a
standard DVD player.
You can record onto the available space on the disc and
perform editing functions such as giving titles to discs
and programs and erasing programs before finalizing.
• When programming is erased from a DVD±R, that space
does not become available. Once an area on a DVD
±R is recorded on, that area is no longer available for
recording, whether the recording is erased or not.
• It takes about 30 seconds for the unit to complete
recording management information after recording
finishes.
• This product optimizes the DVD±R for each recording.
Optimization occurs when you start recording after
inserting the disc or turning on the unit. Recording onto
the disc may become impossible if optimization is carried
out too many times.
• Once a DVD±R/DVD-RW(V) recorded is finalized, it is
playable in a standard DVD player.
Audio CD
• An audio disc on which 44.1kHz PCM Audio is recorded
• Plays CD-DA format audio CD-R and CD-RW discs.
The unit may not be able to play some CD-R or CD-RW
discs due to the condition of the recording.
CD-R/-RW
MP3 CD-R/-RW
ꢀ
• Only CD-R discs with MP3 files recorded with ISO9660
or JOLIET format can be played back
• Only MP3 files with the ".mp3", ".MP3" extension can be
used.
• For MP3 files recorded with a VBR(Variable Bit Rates),
from 32 Kbps to 320 Kbps, the sound may cut in out.
• Playable bitrate range is from 56Kbps to 320Kbps.
• The unit can handle a maximum of 1000 files and
folders.
• Playback may be impossible in some cases due to the
condition of recording.
• This unit can play back DVD±R discs recorded and
finalized with a Samsung DVD video recorder. It may not
be able to play some DVD±R discs depending on the
disc and the condition of the recording.
DVD-RW Disc Playback and Recording
• Recording and playback can be performed on DVD-RW
discs in both the Video and VR Modes.
• Once a DVD-RW is recorded in VR or Video mode is
finalized, you cannot perform additional recording.
• Once a DVD-RW is recorded in Video Mode and
finalized, it becomes a DVD-Video.
• DVD-RAM/DVD±RW/DVD±R disc recorded with MP3
files can be played back.
JPEG CD-R/-RW
ꢀ
• Only JPEG files with the ".jpg", ".JPG" extension can be
used.
• In both modes, playback can be performed before and
after finalization, but additional recording, deleting and
editing can not be performed after finalization.
• If you want to record the disc in VR Mode and then
record in V Mode, be sure to first reformat the disc.
Please be aware that formatting may erase all of the
discs content.
• The unit can handle a maximum of 1000 files and
folders.
• Maximum size of progressive JPEG is 3M pixels.
• MOTION JPEG is not supported.
• DVD-RAM/±RW/±R discs that contain JPEG files can be
played back.
English - 4
Download from Www.Somanuals.com. All Manuals Search And Download.
• When inserting an unused disc, a message will appear
asking whether to initialize the disc or not. If you select
"YES", the disc will be formatted in VR mode.
• DVD-RW (VR mode)
- This is a format that is used for recording data on a
DVD-RW disc. You can record multiple titles, edit, delete,
partial delete, create a playlist, etc.
- A disc that is recorded in this mode will not play in
standard DVD players.
• DVD-RW (Video mode)
- This is a format that is used for recording data on a
DVD-RW or DVD-R disc. The disc can be played by an
existing DVD player once it has been finalized.
- If a disc that has been recorded in Video Mode by a
different maker’s recorder but has not been finalized, it
cannot be played or recorded by this recorder.
Protection
This DVD Recorder can allow you to protect the contents
of your discs, as described below.
• Program-protection: See page 61 “Locking a Title”
• Disc-protection: See page 70 “Disc Protection”
✻
DVD-RAM/DVD±RW/DVD±R discs that are incompatible
with the DVD-VIDEO format cannot be played with this
product.
✻
✻
For more information on DVD recording compatibility,
consult your DVD-RAM/DVD±RW/DVD±R manufacturer.
Use of poor quality DVD-RAM/DVD±RW/DVD±R discs
may cause the following unexpected problems including,
recording failure, loss of recorded or edited materials or
damage to the recorder.
Do not use the following discs!
• LD, CD-G, CD-I, CD-ROM and DVD-ROM discs should
not be used in this product.
DVD+RW Disc Playback and Recording
• With DVD+RW discs, there is no difference between
DVD-Video format (Video mode) and DVD-Video
Recording format (VR mode).
• You can make your own chapters on DVD+RWs and edit
them using the Chapter Edit menu.
• Some commercial discs and DVD discs purchased
outside your region may not be playable with this
product. When these discs are played, either “No Disc."
or "The disc cannot be played. Please check the regional
code of the disc." will be displayed.
• If your DVD-RAM/DVD±RW/DVD±R disc is an illegal
copy or is not in DVD video format, it may also not be
playable.
• Finalizing is generally unnecessary when using a
DVD+RW disc.
DVD-RAM Disc Playback and Recording
• For cartridge type DVD-RAM discs, remove the cartridge
and use only the disc
• Ensure that the recording mode is set to VR mode.
Otherwise, this product will not be able to play the
recording.
Disc Compatibility
• A 8X speed DVD+RW or greater disc can be played, but
maximum recording speed is 4X.
• Not all brands of discs will be compatible with this unit.
• The latest firmware upgrade to improve recording &
playback quality can be downloaded from our web site.
(Download Center at www.samsung.com)
ꢀ
• You cannot play a DVD-RAM in most DVD players due
to compatibility issues.
• Only DVD-RAM standard Version 2.0 discs can be
played in this unit.
• If disc compatibility problems continue, or there is an
issue upgrading your recorder, contact the Call Center at
1-800-SAMSUNG.
•
DVD-RAM discs recorded on this unit may not work with
other DVD Players. To determine compatibility with these
DVD-RAM discs, refer to the user’s manual for the player.
COPY PROTECTION
• Many DVD discs are encoded with copy protection.
Because of this, you should only connect your DVD
Recorder directly to your TV, not to a VCR.
Connecting your DVD recorder to a VCR results in a
distorted picture from copy-protected DVD discs.
• This product incorporates copyright protection
technology that is protected by methods claims of
certain U.S. patents and other intellectual property
rights owned by Macrovision Corporation and other
rights owners. Use of this copyright protection
technology must be authorized by Macrovision
Corporation, and is intended for home and other
limited viewing uses only unless otherwise authorized
by Macrovision Corporation.
Reverse engineering or disassembly is prohibited.
English - 5
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Getting Started
System Setup
■
■
Warning ...................................................................2
■
Initial Setup..............................................................26
OSD Language Setup.............................................26
Precaution ...............................................................3
Important Safety Instructions ..................................3
Handling Cautions...................................................3
Maintenance of Cabinet ..........................................3
Disc Handling..........................................................3
Disc Storage............................................................4
Disc Specifications..................................................4
■
■
Using the Setup Menu.............................................26
Setting Up the System Options ...............................27
Set Top Box Control ................................................27
CM Skip Time Setting..............................................28
EP Mode Time Setting ............................................29
Automatic Chapter Creation....................................29
Quick Recording Setting .........................................30
Anynet+(HDMI-CEC)...............................................30
■
■
■
■
General Features ....................................................8
Before Reading the Instruction Manual...................9
How to use the DVD Recorder................................9
■
■
■
■
Clock Set.................................................................31
Language Setting ....................................................31
Setting Up the Audio Options ..................................32
Unpacking ...............................................................10
Accessories.............................................................10
Preparing the Remote Control ................................10
Tour of the Remote Control.....................................12
Video(Display) Setting.............................................33
TV Aspect................................................................33
Input Level...............................................................33
Black Level..............................................................33
3D Noise Reduction ................................................33
HDMI/DVI Resolution..............................................34
DivX(R) Registration ...............................................34
■
Description ..............................................................13
Front Panel..............................................................13
Front Panel Display.................................................13
Rear Panel ..............................................................14
■
Parental Control ......................................................35
Setting the Rating Level..........................................35
Changing the Password..........................................35
Connecting & Setting Up
■
Step 1: Connecting the Antenna Cable ...................15
Antenna + Set Top Box Controller + DVD Recorder +
TV : Cable box with a video/audio output or a satellite
receiver....................................................................15
Recording
■
■
Step 2 : Connecting HDMI/DVI to a TV...................16
Connecting to a TV with HDMI Jack .......................16
Connecting to a TV with DVI Jack...........................17
■
Recordable discs.....................................................36
Compatibility between Samsung and Other manufacturer's Recorders..36
■
Recording Formats..................................................37
DVD-RW(Video mode)/-R .......................................37
DVD-RAM/-RW(VR mode)......................................37
DVD+RW.................................................................37
Step 3 : Connecting the Video Cable ......................18
Connecting to a Video input jack.............................18
Connecting to an S-Video input jack.......................19
Connecting to Component video input jacks
■
■
Recording Mode......................................................38
(Y,PB,PR) .................................................................20
Unrecordable video .................................................38
About the INFO Button............................................39
■
■
Step 4 : Connecting the Audio Cable ......................21
Connecting to your TV ............................................21
Connecting to a stereo amplifier with analog input
jacks........................................................................22
Connecting to an AV amplifier with a digital input jack.....23
■
■
■
■
■
■
■
■
Recording from External Equipment .......................40
Copying from a Camcorder .....................................41
Making a One Touch Recording (OTR)...................42
Setting a Timer Recording.......................................43
Flexible Recording (for Timer Recording only)........44
Editing the Scheduled Record List ..........................44
Deleting the Scheduled Record List........................45
Step 5 : Connecting External Devices.....................24
Connecting a VCR, Set Top Box(STB) or DVD Player
to the AV 1 IN or S-VIDEO IN jacks ...........................24
Connecting a Camcorder ........................................25
Recording the Scheduled Record List.....................45
Recording on Free Space .......................................45
■
EZ REC MODE .......................................................46
English - 6
Download from Www.Somanuals.com. All Manuals Search And Download.
Playback
Additional Information
■
■
■
Region code (DVD-Video only) ...............................47
Logos of Discs that can be played ..........................47
■
Troubleshooting.......................................................73
■
Cable Box/Satellite Receiver Brand Code Table.....75
Cable box brand......................................................75
Satellite receiver brand ...........................................77
Disc types that can be played .................................47
Discs that cannot be played....................................48
■
■
■
Error Message Solutions.........................................78
Specifications ..........................................................80
Warranty..................................................................81
■
■
Playing a Disc..........................................................48
Using the Disc Menu & Title Menu..........................49
Using the playback related buttons.........................49
Slow Motion Play.....................................................50
Step Motion Play.....................................................50
Using the ANYKEY Button ......................................51
Playing an Audio CD/MP3.......................................55
Playing an Audio CD(CD-DA) .................................55
Playing an MP3 Disc...............................................56
Playing Repeatedly .................................................56
■
■
■
Playing a Picture CD ...............................................57
Playing an MPEG4 Disc..........................................58
Playing the Title List ................................................59
Editing
■
■
■
Basic Editing (Title List)...........................................60
Renaming (Labeling) a Title ....................................60
Locking (Protecting) a Title......................................61
Deleting a Title ........................................................61
Deleting a Section of a Title ....................................62
Editing a Chapter ....................................................63
Dividing a Title.........................................................64
Advanced Editing (Playlist)......................................65
Creating a Playlist ...................................................65
Playing Entries in the Playlist..................................65
Renaming a Playlist Entry.......................................66
Editing a Scene for the Playlist ...............................66
Copying a Playlist Entry to the Playlist....................69
Deleting a Playlist Entry from the Playlist................69
Disc Manager ..........................................................69
Editing the Disc Name.............................................69
Disc Protection........................................................70
Formatting a Disc....................................................70
Finalizing a Disc......................................................71
Unfinalizing a Disc (V/VR mode).............................71
Delete All Title Lists.................................................72
Edit Compatible.......................................................72
English - 7
Download from Www.Somanuals.com. All Manuals Search And Download.
A variety of functions with an easy-to-use user interface
General Features
The integrated menu system and the messaging function
allows you to perform desired operations both easily and
conveniently. With a DVD-RAM or DVD-RW (VR mode)
disc, you can edit recorded images, create a playlist,
and edit videos in a specific sequence according to your
requirements.
The DVD-R157 allows you to record and play high quality
digital video on DVD-RAM/DVD±RW/DVD±R discs.
High quality digital audio and video recording and
playback
You can record up to approximately 16-hours of video on
a double side 9.4 GB DVD-RAM disc,up to 15-hours on a
dual-layer 8.5GB DVD±R disc, and up to 8-hours on a 4.7
GB DVD-RAM/DVD±RW/DVD±R disc, depending on the
recording mode.
MPEG4 playback
This DVD Recorder can play MPEG4 formats within an avi
file.
DivX Certification
Selectable Record Mode
DivX, DivX Certified, and associated logos
are trademarks of DivXNetworks, Inc and
are used under license.
You can set your recorder to one of five different recording
speeds, each varying in recording quality and length. EP
mode yields the most recording time, LP & SP modes
provide less recording time with higher quality recording,
and XP mode gives you the highest quality recording.
There's also the FR (Flexible Recording) mode that lets
you record with the best picture quality possible for the
recording time and remaining space on the disc in timer
recording.
HDMI (High Definition Multimedia Interface)
HDMI reduces picture noise by allowing a pure digital
video/audio signal path from the DVD Recorder to your
TV.
Tunerless DVD Recorder
Automated Quality Adjustment for Timer Recording
If FR mode is selected, the video quality is adjusted
automatically so that all video for the scheduled time can
be recorded onto the free disc space. (See pages 43~44)
The DVD-R157 does not have a TV tuner.
Recording TV broadcasts is possible via Connection to
Cable/Satellite boxes and Multi Channel Video Services.
Create a DVD video title using a DVD±RW/DVD±R disc
EZ REC MODE
With the DVD-R157, you can create your own DVD video
title on 4.7 GB DVD±RW/DVD±R or 8.5GB DVD±R discs.
This function allows you Initialize and Finalize a disc
automatically. (See page 46)
Copying data from a digital camcorder using a DV
input jack
Record digital camcorder video onto DVD-RAM, DVD±RW
or DVD±R discs using the DV input jack (IEEE 1394-4pin).
(See page 41)
High quality progressive scan
Progressive scanning provides high resolution and flicker
free video.
The 10-bit 54-MHz DAC and 2D Y/C Separating Circuitry
provides the highest video playback and recording quality.
(See page 20.)
English - 8
Download from Www.Somanuals.com. All Manuals Search And Download.
Before Reading the Instruction
Manual
How to use the DVD Recorder
▌Step 1 : Select the disc type
Make sure to check the following before reading the
user’s manual.
This unit can record on the following types of discs.
If you want to repeatedly record on the same disc or you
want to edit the disc after recording, select a rewritable
DVD±RW or DVD-RAM type disc.
If you want to save the recording without making any
changes, choose a non-rewritable DVD±R.
Icons that will be used in manual
Icon
Term
Definition
This involves a function available
in DVD or DVD-R/DVD-RW (V)/+R
discs that have been recorded and
finalized.
DVD
This involves a function available in
DVD-RAM.
RAM
-RW
-R
▌Step 2 : Format the disc to start recording
This involves a function available in
DVD-RW.
The recorder automatically starts formatting when an
unused disc is inserted. This is required for the preparation
of disc recording.
This involves a function available in
DVD-R.
This involves a function available in
DVD+RW.
Using a DVD-RAM
+RW
+R
This type of disc can be formatted in DVD-Video
Recording format (VR mode). You can edit recorded video
and create a playlist and edit video in a specific sequence
according to your requirements.
This involves a function available in
DVD+R.
This involves a function available in
a data CD (CD-R or CD-RW).
CD
Using a DVD±RW/+R
This involves a function available
JPEG in CD-R/-RW or DVD-RAM/
DVD±RW/DVD±R discs.
• When an unused DVD±RW/+R disc is first inserted, the
message “Uninitialized Disc. Do you want to initialize this
disc?” will be displayed.
If you select Yes, initializing will begin. DVD-RW disc can
be formatted in either DVD-Video format (Video mode)
or DVD-Video Recording format (VR mode)
• There are no differences between DVD-Video format
(Video mode) and DVD-Video Recording format (VR
mode) with DVD+RW discs.
JPEG
MP3
This involves a function available
MP3 in CD-R/-RW or DVD-RAM/
DVD±RW/DVD±R discs.
This involves a function available
MPEG4 MPEG4 in CD-R/-RW or DVD-RAM/
DVD±RW/DVD±R discs.
Using a DVD-R
This involves a case where a
Caution function does not operate or
settings may be cancelled.
When using a DVD-R disc, only V mode recording is
possible and no initialization is needed to play it on this
recorder. However, finalization is necessary to play this
disc on other DVD players.
This involves tips or instructions on
NOTE
the page that help each function
operate.
■
■
You can only use either the VR or Video mode on
a DVD-RW, but not both at the same time.
One-
Touch
button
A function that can be operated by
using only one button.
You can format a DVD-RW to V or VR mode using
disc manager.
ANYKEY A function that can be operated by
button using ANYKEY button.
It should be noted that the disc's data will be lost
when changing formats.
About the use of this Instruction Manual
1) Be sure to familiarize yourself with the Safety
Instructions before using this product. (See pages 2 ~ 5)
2) If a problem occurs, check the Troubleshooting section.
(See pages 73 ~74)
▌
Step 3 : Recording
There are two different recording methods. Direct Recording
(recording a program you are currently watching) and
Timer Recording. Timer recording is determined as a Date :
MM/DD, MON-FRI, Every SAT, etc.. There are 5 recording
modes : XP(high quality mode), SP(standard quality mode),
LP(long recording mode), EP(extended mode) and FR
mode. When using FR mode to record, the picture quality is
determined by the remaining time on the disc.
Copyright
©2007 Samsung Electronics Co.
All rights reserved; No part or whole of this user’s manual
may be reproduced or copied without the prior written
permission of Samsung Electronics Co.
English - 9
Download from Www.Somanuals.com. All Manuals Search And Download.
▌
Step 4 : Playing
Unpacking
To start playback select the title you want to play from the
Title list.
A DVD consists of sections called titles, and sub sections
called chapters.
During recording, a title is created between two points
where you start and stop recording. Chapters will be
created automatically when you finalize recording on
DVD-R/DVD-RW discs in Video mode.
▌Accessories
Check for the supplied accessories below.
You can make your own chapters on DVD+RWs and
edit them using the Chapter Edit menu. The chapter’s
length (interval between chapters) varies according to the
recording mode.
Video/Audio Cable
(AC39-00073A)
IR Blaster cable
(AK39-00055A)
▌Step 5 : Editing a recorded disc
Editing on discs is easier than editing on conventional
video tapes. The recorder supports many different edit
functions, possible only with DVDs.
With a simple and easy edit menu, you can operate various
edit functions, such as delete, copy, rename, lock, etc., on
a recorded title.
Remote Control
(AK59-00061C)
Batteries for Remote
Control (AAA Size)
(AC43-12002H)
With this recorder, you can create playlists using a DVD-
RAM/DVD-RW in VR mode. Once a playlist is created you
can create/edit a new playlist on the same disc without
changing the original recording.
Instruction Manual
(AK68-01315A)
Quick Guide
(AK68-01320A)
▌
Step 6 Finalizing & Playing on other
:
DVD components
To play your DVD on other DVD components, finalizing
may be necessary. First, finish all editing and recording
operations, then finalize the disc.
▌
Preparing the Remote Control
When using a DVD-RW disc in VR Mode
Install Batteries in the Remote Control
• Open the battery cover on the back of the remote.
• Insert two AAA batteries. Make sure that the polarities
(+ and -) are aligned correctly.
Although finalizing is generally unnecessary when playing
the disc on a VR Mode compatible component, a finalized
disc should be used for playback.
When using a DVD-RW disc in Video Mode
The disc should be finalized first to enable playback
on anything other than this recorder. No more editing
or recording can be made on the disc once it has been
finalized.
• Replace the battery cover.
If the remote control does not operate properly:
• Check the polarity + - of the batteries.
• Check if the batteries are drained.
• Check if the remote sensor is blocked by obstacles.
• Check if there is any fluorescent lighting nearby.
When using a DVD±R disc
You should finalize the disc to play it on a component
other than this recorder. No more editing or recording can
be made on the disc once it has been finalized.
Dispose of batteries according to local environmental
regulations. Do not put them in the household trash.
■
You can finalize automatically using the EZ REC
MODE. (See page 46)
English - 10
Download from Www.Somanuals.com. All Manuals Search And Download.
To determine whether your television is compatible, follow the instructions below.
1. Switch your television on.
2. Point the remote control towards the television.
3. Press and hold the POWER button and enter the two-figure code simultaneously corresponding to the brand of your
television by pressing the appropriate number buttons.
Brand
AIWA
ANAM
BUTTON
BRAND
BUTTON
82
SABA
57, 72, 73, 74, 75
10, 11, 12, 13, 14, 15, 16, 17, 18
57
SALORA
SAMSUNG
SANYO
74
BANG &
OLUFSEN
01,02,03,04,05,06,07,08,09
41, 42, 43, 44, 48
BLAUPUNKT
BRANDT
71
73
57
52
SCHNEIDER
SELECO
SHARP
06
74
BRIONVEGA
CGE
36, 37, 38, 39, 48
SIEMENS
SINGER
SINUDYNE
SONY
71
CONTINENTAL EDISON 75
57
DAEWOO
EMERSON
FERGUSON
FINLUX
19, 20, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34
57
64
35, 48
73
73
TELEAVA
06, 49, 57
TELEFUNKEN 67, 73, 75, 76
THOMSON 72, 73, 75
THOMSON ASIA 80, 81
FORMENTI
FUJITSU
GRADIENTE
GRUNDIG
HITACHI
IMPERIAL
JVC
57
84
70
TOSHIBA
WEGA
47, 48, 49, 50, 51, 52
49, 52, 71
60, 72, 73, 75
52
57
06
63
YOKO
ZENITH
61, 79
Result: If your television is compatible with the remote
control, it will switch off.
LG
06, 19, 20, 21, 22, 78
06, 69
LOEWE
It is now programmed to operate with the remote
control.
LOEWE OPTA 06, 57
MAGNAVOX
METZ
40
■
If several codes are indicated for your television
brand, try each one in turn until you find one
that works. If you replace the remote control’s
batteries, you must set the brand code again.
57
MITSUBISHI
MIVAR
06, 48, 62, 65
52, 77
83
NEC
NEWSAN
NOBLEX
NOKIA
68
You can then control the television using the following
buttons.
66
Button
Function
74
POWER
Used to switch the television on and off.
NORDMENDE 72, 73, 75
INPUT SEL. Used to select an external source.
TV VOL +/- Used to adjust the volume of the television.
CBC/TV CH Used to select the desired channel.
PANASONIC
PHILIPS
53, 54, 74, 75
06, 55, 56, 57
06, 56, 57
58, 59, 73, 74
06, 56
PHONOLA
PIONEER
RADIOLA
TV MUTE
0~9
Used to toggle the sound on and off.
Used to input number directly.
TV 100+
Used to select channels over 100.
RADIOMARELLI 57
RCA
REX
45, 46
74
■
The various functions may be able to be
controlled on all televisions. If you encounter
problems, operate the television directly.
English - 11
Download from Www.Somanuals.com. All Manuals Search And Download.
▌Tour of the Remote Control
You can control part of another manufacturer’s TV functions with this remote control.
• Buttons that can be controlled on your TV : POWER, INPUT SEL., TV VOL (+/-), CBC/TV CH(
0~9, TV 100+.
/
), TV MUTE,
8. REVERSE/FORWARD SEARCH Buttons
17
18
Press to search a disc backwards or forwards.
9. STOP Button
1
2
Press to stop a disc or to stop the recording.
3
10. TV VOL Buttons
19
20
Volume adjustment.
11. MENU Button
4
Brings up the DVD recorder’s setup menu.
12. ENTER/DIRECTION Buttons
21
6
5
6
(UP/DOWN and LEFT/RIGHT Buttons)
This button functions as a toggle switch.
13. TITLE LIST/DISC MENU Button
7
8
8
Use this to enter the View Recording list/Disc menu.
22
9
14. ANYKEY Button
10
23
Use this to view the status of the disc that is being
played.
24
25
15. REC Button
11
12
Use to make a recording on writable/rewritable discs.
16. REC MODE Button
Use this to set the desired Recording time and picture
quality. (XP/SP/LP/EP)
17. INFO Button
26
27
28
13
14
15
This will display current setting or disc status.
18. INPUT SEL. Button
29
16
Selects line input signal in external input mode.
(AV1, AV2 or DV)
19. EZ REC MODE Button
20. OPEN/CLOSE Button
To open and close the disc tray.
21. AUDIO Button
Use this to access various audio functions on a disc.
(DVD mode)
1. TV Button
Press this to operate your TV.
2. DVD Button
Press this to operate your DVD Recoder.
3. POWER Button
22. PLAY/PAUSE Button
Press to play/pause a disc.
23. CBC/TV CH Buttons
Use this to select a TV channel.
Press to power the DVD Recorder on and off.
24. TV MUTE Button
This operates as Sound Mute. (TV mode)
4. NUMBER Buttons
25. RETURN Button
5. TV 100+/CM SKIP/SET Button
Returns to the previous menu.
Press this to select channel 100 or higher.
Press this to skip a portion of the program
automatically during playback of a DVD disc.
Press this to change the set top box channels.
(For some set top box brands)
26. PLAY LIST/TITLE MENU Button
Use this to return to the Title menu, or to view the
recorded Playlist.
27. EXIT Button
6. REVERSE/FORWARD SKIP Buttons
28. TIMER/MARKER Button
29. CANCEL Button
Press to skip a disc backwards or forwards.
7. REVERSE/FORWARD STEP Buttons
Press to play frame by frame.
Ã
This is a special remote control for the visually impaired, and has Braille points on the POWER( ), STOP( ) and
PLAY( ) buttons..
English - 12
Download from Www.Somanuals.com. All Manuals Search And Download.
Description
▌Front Panel
10
11
12
10
1. POWER Button
Turns the recorder on and off.
2. AV 2 IN
Connect external equipment.
3. DV-IN
8. INPUT SEL. Button
Select line input signal in external mode.
(AV1, AV2, or DV)
9. REC MODE Button
Use this to set the desired Recording time and
picture quality. (XP/SP/LP/EP)
Connects external digital equipment with a DV
jack. (such as a camcorder)
10. REC Button
Starts recording.
4. DISC TRAY
Opens to accept a disc.
11. STOP Button
Stops disc playback.
5. P.SCAN Button
Selects the progressive scan mode.
12. PLAY/PAUSE Button
Plays a disc or pauses playback.
6. OPEN/CLOSE Button
Opens and closes the disc tray.
13. SKIP Buttons
Go to the next title/chapter/track, or go back to
the previous title/chapter/track.
7. DISPLAY
Displays the playing status, time, etc.
▌Front Panel Display
1. Lights when a disc is loaded.
2. Lights in the record mode.
4. Lights when a DVD-RAM/DVD±RW/DVD±R
disc is loaded.
3. Lights to indicate the timer record mode.
5. Alpha/Numeric display.
6. Lights in the progressive scan mode.
English - 13
Download from Www.Somanuals.com. All Manuals Search And Download.
▌Rear Panel
1. DIGITAL AUDIO OUT(OPTICAL)
Connects to an amplifier having a digital optical
audio input jack.
7. AV 1 AUDIO IN
Connect the output of external equipment using
audio cables
2. DIGITAL AUDIO OUT(COAXIAL)
Connects to an amplifier having a digital coaxial
audio input jack.
8. AV 1 VIDEO IN
Connects the output of external equipment
using a video cable.
3. AV AUDIO OUT
9. AV 1 S-VIDEO IN
Connect to the audio input of external
equipment using audio cables.
Connects the output of external equipment
using an S-Video cable.
4. AV VIDEO OUT(good video quality)
Connects the input of external equipment using
a Video cable.
10. Cable Box Control OUT
Connection of the IR Blaster for a cable box.
11. HDMI OUT
5. AV S-VIDEO OUT(better video quality)
Connects the input of external equipment using
an S-Video cable.
Connects the input of external equipment using
a HDMI cable.
6. COMPONENT VIDEO OUT(best video quality)
Connect to equipment having Component video
input jacks.
English - 14
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting & Setting Up
Step 1: Connecting the Antenna Cable
This section involves various methods of connecting the DVD Recorder to other external components.
▌Antenna + Set Top Box Controller + DVD Recorder + TV : Cable box with a video/
audio output or a satellite receiver
You can record channels by selecting the channel on the cable box. You cannot record one channel while
watching another channel. Be sure that the cable box is turned on.
Getting Connected
1. Find and Connect the included IR Blaster cable into the
Cable Box Control jack of the DVD Recorder.
Figure 2
2. Find the Cable Box IR Sensor
To control cable box recording, find the IR sensor.
A. Turn the cable box Off.
B. Hold the cable box’s remote so that it touches the
(Press and release the power button each time you
move the remote; holding down the button will not work.)
D. When the cable box powers On, you have found the sensor.
E. Remember the location of the sensor.
front of the device (see Figure 1).
3. Place the IR Blaster.
Place the Set top box controller of the IR Blaster on the
top or underneath the cable box approximately 1 inch
in front of the sensor you found in 2.
Figure 1
Use the double-sided tape to secure the IR Blaster.
■
■
■
You must select a cable box brand from the table
on pages 75~77. If you do not know the brand
name, please contact your cable provider.
After connecting cable box to the DVD recorder
through the IR Blaster cable, you need to set up the
Set Top Box Control menu. (See pages 27~28)
Incorrect
Correct
C. Move the remote across the front while pressing the
power button On and Off (Figure 2).
The DVD-R157 does not have a TV Tuner.
English - 15
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 2 : Connecting HDMI/DVI to a TV
If your TV has a HDMI/DVI input, connect the HDMI/DVI cable to the TV. You will enjoy the best quality image and
sound.
▌Connecting to a TV with HDMI Jack
Using the HDMI- HDMI cable connect the HDMI OUT jack on the rear of the DVD Recorder to the HDMI IN jack
of your TV. Press the input selector on your TV remote control until the HDMI signal from the DVD Recorder
appears on your TV screen.
■
■
To watch through the HDMI output, set the digital
audio output to PCM.(See page 32)
■
Please check the
logo (If your TV has an
logo, then it supports Anynet+ function.)
Depending on the HDMI device(TV/HDMI
Receiver) you use, audio may not be supported.
If your TV does not support Dolby digital/DTS,
Audio output is not available when you set the
Digital output to Bitstream or select DTS On in
the Audio setup menu. In this case, set the digital
audio ouput to PCM or DTS Off.
■
If you use an HDMI cable to connect a Samsung
TV to the DVD recorder, you can operate the
recorder using the TV remote control. (This is
only available with SAMSUNG TVs that support
Anynet+(HDMI-CEC).) (See pages 30~31)
English - 16
Download from Www.Somanuals.com. All Manuals Search And Download.
▌Connecting to a TV with DVI Jack
Using the HDMI-DVI cable (not included), connect the HDMI OUT terminal on the rear of the DVD Recorder to the
DVI IN terminal of your TV.
An HDMI to DVI connection requires a separate audio connection, using the audio cables, connect the AUDIO (red
and white) OUT terminals on the rear of the DVD Recorder to the AUDIO (red and white) IN terminals of your TV.
Turn on the DVD Recorder and TV.
Press the input selector on your TV remote control until the DVI signal from the DVD Recorder appears on your
TV screen.
■
■
To change HDMI output resolution, see page 34.
■
Why does Samsung use HDMI?
Analog TVs require an analog video/audio
signal.However, when playing a DVD, the data
transmitted to a TV is digital. Therefore either a
digital-to-analog converter (in the DVD Recorder)
or an analog-to-digital converter (in the TV) is
required. During this conversion, the picture
quality is degraded due to noise and signal loss.
HDMI technology is superior because it requires
no D/A conversion and is a pure digital signal from
the DVD recorder to your TV.
HDMI (High Definition Multimedia Interface)
HDMI enables you to make a digital video and
audio connection with a single cable.
Using HDMI, the DVD player transmits a digital
video and audio signal and displays a vivid picture
on a TV having an HDMI input jack.
■
■
HDMI is completely compatible with DVI. The only
difference between HDMI and DVI is that HDMI
supports multi-channel audio.
HDMI connection description
■
What is the HDCP?
HDMI connector - Both uncompressed video data
and digital audio data (LPCM or Bit Stream data).
- The DVD recorder outputs a pure digital signal to
the TV.
- If your TV does not support HDCP
(Highbandwidth Digital Content Protection), snow
noise appears on the screen.
HDCP (High-bandwidth Digital Content Protection)
is a system for protecting DVD content output
via HDMI from being copied. It provides a secure
digital link between a video source (PC, DVD. etc)
and a display device (TV, projector. etc). Content
is encrypted at the source device to prevent
unauthorized copies from being made.
English - 17
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 3 : Connecting the Video Cable
There are several ways to connect your DVD Recorder. Select one of the video connections on the following
pages.
You must use one of the following audio/video connections on this unit.
▌Connecting to a Video input jack
Connect a video(yellow) cable between the VIDEO(yellow) OUT jack on DVD Recorder and VIDEO(yellow) IN jack
on the TV (or AV amplifier).
• You will enjoy normal quality images.
• Connect the audio cables(white and red) between the
AUDIO OUT jacks on the DVD Recorder and AUDIO IN
jacks on your TV(or AV amplifier). (See pages 21~23)
English - 18
Download from Www.Somanuals.com. All Manuals Search And Download.
▌
Connecting to an S-Video input jack
Connect an S-Video cable(not supplied) between the S-VIDEO OUT jack on DVD Recorder and S-VIDEO IN jack
on your TV (or AV amplifier).
• You will enjoy high quality images. S-Video separates
■
S-Video or Component video outputs are
available only if your TV supports S-Video input or
Component video input, respectively.
If S-Video or Component video output does not
work, check your TV connections and the TV input
selection settings.
the picture element into black and white (Y) and color
(C) signals to present clearer images than regular video
input mode.
• Connect the audio cables(white and red) between the
AUDIO OUT jacks on the DVD Recorder and AUDIO IN
jacks on your TV(or AV amplifier). (See pages 21~23)
English - 19
Download from Www.Somanuals.com. All Manuals Search And Download.
▌
Connecting to Component video input jacks (Y,PB,PR)
1. Connect the Component video cables(not supplied)
between the COMPONENT OUT(Y,PB,PR) jacks on the
DVD Recorder and COMPONENT IN(Y,PB,PR) jacks on
your TV (or AV amplifier).
■
■
Compared to standard interlaced video,
progressive scan doubles the amount of video
lines fed to your TV, resulting in a clearer, more
stable, and flicker free image than interlaced
video. The component output jack of the DVD
player can be used for progressive output mode,
which is only available with TVs that support
progressive scan.
2. If the connected TV supports Progressive Scan, press
the P.SCAN button on the front of the DVD Recorder to
enjoy best quality video. Pressing the P.SCAN button
switches Progressive (480p) / Interlace (480i) scan
mode on.
Progressive Scan Output (480p).
•
You will enjoy the best quality accurate color
Not all high definition television sets are fully
compatible with this product. If the 480p
progressive scan picture is not satisfactory, press
the P.SCAN button on the unit to switch to the
Interlace mode.
If there are questions regarding TV set
compatibility with this model, please contact our
customer service center at 1-800-SAMSUNG.
reproduction images. Component video separates the
picture element into black and white(Y), blue(PB) and
red(PR) signals to present clear and clean images.
•
Connect the audio cables(white and red) between the
AUDIO OUT jacks on the DVD Recorder and AUDIO IN
jacks on your TV(or AV amplifier).
(See pages 21~23)
■
The Component jacks will not output video
resolutions above 480p. To view 720p and 1080i,
connect the DVD-R157 to your TV with an HDMI-
HDMI cable. With HDMI connected, press the
P.SCAN button to alternate between all available
resolutions. (See page 34)
English - 20
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 4 : Connecting the Audio Cable
Select one of the Audio connections on the following pages.
▌Connecting to your TV
This connection will use your TV’s speakers.
English - 21
Download from Www.Somanuals.com. All Manuals Search And Download.
▌Connecting to a stereo amplifier with analog input jacks
If your stereo amplifier only has AUDIO INPUT jacks(L and R), use the AUDIO OUT jacks.
English - 22
Download from Www.Somanuals.com. All Manuals Search And Download.
▌Connecting to an AV amplifier with a digital input jack
If your AV amplifier has a Dolby Digital or DTS decoder and a digital input jack, use this connection. To enjoy
Dolby Digital or DTS sound, you will need to set up the audio settings. (See page 32)
Manufactured under license from Dolby Laboratories.
“Dolby” and the double-D symbol are trademarks of
Dolby Laboratories.
“DTS” and “DTS Digital Out” are trademarks of DTS, Inc.
English - 23
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 5 : Connecting External Devices
This allows you to connect your DVD Recorder to other external devices and view or record their outputs.
▌Connecting a VCR, Set Top Box(STB) or DVD Player to the AV 1 IN or S-VIDEO IN jacks
Connecting a VCR or external device to the AV 1 IN jacks of the DVD Recorder.
You can record from connected equipment (VCR, STB or DVD Player).
English - 24
Download from Www.Somanuals.com. All Manuals Search And Download.
▌Connecting a Camcorder
You can record from connected equipment, such as a camcorder by using the AV 2 IN or DV IN jacks on front of
the DVD Recorder.
(See page 41)
■
■
■
when an Input source is inserted into AV 2 while
watching TV, the Input will be switched to AV 2
automatically.
If the Input is not selected automatically, press the
INPUT SEL. button on the remote control to select
the DV Input.
Check your camcorder's owner's manual to see
how to use the camcorder in this mode.
English - 25
Download from Www.Somanuals.com. All Manuals Search And Download.
System Setup
Initial Setup
If you connected an external Audio System, turn on your Audio
System and select AUX, CD or DVD.
The OSD (On-Screen Display) displayed on the screen may vary
depending on conditions such as the disc type and whether the disc
has been inserted or not.
Press 1 for English
Touche 2 pour Français
Pulse 3 para Español
MACROVISION ST01
▌OSD Language Setup
After plugging in the recorder, the first time you press the POWER
button, the screen shown to the left appears.
1. Press the POWER button.
2. Press a number button to select the language.
■
If the language for the startup screen is not set, the settings may
change whenever you turn the power on or off. Therefore, make
sure that you select the language you want to use.
Using the Setup Menu
For ease of use, we recommend that you perform the initial setup
before using the product.
Timer Record
DVD-Recorder
No Disc
Timer Rec.
►
►
Timer Record
Scheduled Record List
Setup
1. With the unit in Stop mode/No Disc mode, press the MENU button on
the remote control.
Menu items differ depending on the disc type.
2. Select Setup using the ▲▼ buttons, then press the ENTER or ►
button.
MOVE
ENTER
RETURN
EXIT
Setup menu will be displayed.
• System
Setup of the General Options.
Setup
DVD-Recorder
No Disc
- Set Top Box Control, CM Skip Time, EP Mode Time, Chapter Creator,
Quick Recording, Anynet+(HDMI-CEC)
Timer Rec.
►
►
►
►
►
►
System
Clock Set
Language
Audio
Setup
• Clock Set
- Manual Clock Set
Video
Parental Control
• Language
Setup of the Language Options.
- Audio, Subtitle, Disc Menu, On-Screen Menu
MOVE
ENTER
RETURN
EXIT
• Audio
Setup of the Audio Options
- Digital Output , DTS, Dynamic Compression
• Video
Setup of the Display Options.
- TV Aspect, Input Level, Black Level, 3D Noise Reduction, HDMI/DVI
Resolution, DivX(R) Registration
• Parental Control
Setup of the Parental Level
Allows users to set the level necessary to prevent children from viewing
unsuitable movies such as those with violence, adult subject matter, etc.
- Password, Rating Level,Change Password
English - 26
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Up the System Options
System
DVD-Recorder
No Disc
▌Set Top Box Control
Timer Rec.
►
►
►
►
►
►
Set Top Box Control
If you have your cable box/satellite receiver(set top box) connected
as shown on page 15, the box can be controlled after setting up this
menu.
CM Skip Time
: 15 Sec
: 6 Hours
: Off
Setup
EP Mode Time
Chapter Creator
Quick Recording
: Off
1. With the unit in Stop mode/No Disc mode, press the MENU button on
the remote control.
Anynet+(HDMI-CEC) : On
Menu items differ depending on the disc type.
MOVE
ENTER
RETURN
EXIT
2. Select Setup using the ▲▼ buttons, then press the ENTER or ►
button.
3. Select System using the ▲▼ buttons, then press the ENTER or ►
button.
System menu will be displayed.
4. Select Set Top Box Control using the ▲▼ buttons, then press the
ENTER or ► button.
Set Top Box Control menu will be displayed.
5. Select the desired sub menu(Control, Connection, CH Digit Lock,
Mode for SET button, and Brand Code) using the ▲▼ buttons, then
press the ENTER or ► button.
Set Top Box Control
DVD-Recorder
No Disc
Control
Timer Rec.
Off
►
►
►
Select the sub item(Off or On) using the ▲▼ buttons, then press the
ENTER button.
Control
:
Setup
Connection
:On
: Off
CH Digit Lock
Mode for SET button : Off
• Off : Turns off the cable box or satellite receiver (set top box) control
function. Select this if you do not want to use the supplied set top box
controller (IR Blaster).
Brand Code
: 0000
MOVE
ENTER
RETURN
EXIT
• On : Turns on the cable box or satellite receiver (set top box) control
function.
Set Top Box Control
DVD-Recorder
No Disc
Connection
Timer Rec.
►
Select the sub item (AV1, AV2 or S-Video) using the ▲▼ buttons, then
press the ENTER button.
Control
: Off
Connection
:AV1
Setup
CH Digit Lock
:
AV2
If you connect your cable box or satellite receiver to the recorder's audio/
video input. (page15)
►
►
Mode for SET button : Off
Brand Code
: 0000
• AV1 : Select this when the cable box or satellite receiver is connected to
the DVD recorder's AV 1 IN jacks.
MOVE
ENTER
RETURN
EXIT
You can watch the output of the cable box or satellite receiver connected
to AV1 when the Recorder is powered off.
• AV2 : Select this when the cable box or satellite receiver is connected to
the DVD recorder's AV 2 IN jacks.
Set Top Box Control
DVD-Recorder
No Disc
• S-Video : Select this when the cable box or satellite receiver is connected
to the DVD recorder's S-Video IN jack.
You can't select AV1 when the cable box or satellite receiver is connected
to the S-Video input.
Timer Rec.
►
Control
: Off
Connection
:S-Video
Setup
CH Digit Lock
:
AV2
►
►
Mode for SET button : Off
Brand Code
: 0000
■
■
See the instruction supplied with your cable box to confirm the
cable box's antenna output channel.
MOVE
ENTER
RETURN
EXIT
The DVD-R157 dose not have a TV tuner.
Recording TV broadcasts is possible via Connection to Cable/
Satellite boxes and Multi Channel Video Services.
English - 27
Download from Www.Somanuals.com. All Manuals Search And Download.
CH Digit Lock
Set Top Box Control
DVD-Recorder
No Disc
Select the sub item(Off or Lock to two digits) using the ▲▼ buttons,
then press the ENTER button.
Timer Rec.
►
Control
: Off
►
• Off : Select this when your cable box or satellite receiver only accepts a
three or more digit channel number. Normally select this.
Connection
: AV1
Setup
CH Digit Lock
:Off
Mode for SET button :
Lock to two digits
►
Brand Code
: 0000
• Lock to two digits : Select this when your cable box or satellite receiver
only accepts a two digit channel number.
MOVE
ENTER
RETURN
EXIT
Mode for SET button
Select the sub item(Off, Mode 1 or Mode 2) using the ▲▼ buttons, then
press the ENTER button.
Set Top Box Control
DVD-Recorder
No Disc
Timer Rec.
►
Control
: Off
Select "Mode 1" or "Mode 2" if your cable box or satellite receiver requires
pressing the SET button, after entering the channel number.
►
Connection
: AV1
Setup
►
CH Digit Lock
: Off
Off
Mode for SET button :
• Off : No code is sent when the SET button is pressed. Normally select this.
Brand Code
:
Mode 1
Mode 2
• Mode 1 or Mode 2 : Sends the channel number you entered.
MOVE
ENTER
RETURN
EXIT
■
■
If "Mode 1" does not work, try "Mode 2."
If your cable box or satellite receiver does not respond to either
setting, contact the manufacturer of the cable box or satellite
receiver.
Brand Code
Set Top Box Control
DVD-Recorder
No Disc
Enter the brand code of your cable box or satellite receiver using the
number buttons, then press the ENTER button.
(See "Cable Box/Satellite Receiver Brand Code Table" on pages 75~77.)
Timer Rec.
►
Control
: Off
►
Connection
: AV1
Setup
►
CH Digit Lock
: Off
►
Mode for SET button : Off
►
Brand Code
: 0000
■
If you cannot get the recorder to control your cable box/satellite
receiver. Check the connection and position of the IR Blaster
cable. (page15)
MOVE
ENTER
RETURN
EXIT
If your cable box or satellite receiver still does not operate with
this recorder, contact your cable company to see if they can
provide you with a compatible cable box or satellite receiver.
▌CM Skip Time Setting
When a program recorded on a DVD-RAM, a DVD-RW, DVD-VIDEO or
a DVD-R is played, the unit can be set to automatically skip a portion
of the program corresponding to a CM(commercial) Skip Time set by
the user.
System
DVD-Recorder
DVD-RW(VR)
Title List
►
►
►
Set Top Box Control
CM Skip Time
1
5
Se
c
Playlist
Disc Manager
Timer Rec.
Setup
30 Sec
EP Mode Time
Chapter Creator
Quick Recording
60 Sec
1. With a disc inserted and the unit in Stop mode, press the MENU button
on the remote control.
: Off
Anynet+(HDMI-CEC) : On
2. Select Setup using the ▲▼ buttons, then press the ENTER or ►
button.
MOVE
ENTER
RETURN
EXIT
You can't use the Setup functions while playing a disc.
3. Select System using the ▲▼ buttons, then press the ENTER or ►
CM SKIP
button.
System menu will be displayed.
4. Select CM Skip Time using the ▲▼ buttons, then press the ENTER or
► button.
CM Skip Time will be displayed.
5. Select the desired time using the ▲▼ buttons, then press the ENTER
or ► button.
6. If you press the CM SKIP button during playback, the section
corresponding to the set time is skipped, and then the next section is
played.
English - 28
Download from Www.Somanuals.com. All Manuals Search And Download.
■
■
CM Skip can be performed only during normal playback.
When the time set is less than the remaining time of a current
title: The next title is played from the beginning.
■
When the time set is less than the remaining time of a playlist, the
next scene is played.
■
■
CM Skip does not work in a still picture mode.
When a set time is less than the remaining time of a scene, last
title, or last track that is currently displayed, a prohibition mark
appears.
■
■
■
CM Skip releases Repeat (including Repeat A-B, Chapter, and Title).
CM Skip may not operate with some DVD-Video discs.
DVD+R/DVD+RW discs doesn't support this function.
▌EP Mode Time Setting
You can set the EP (Extended Play) mode’s time to 6 or 8 hours.
System
DVD-Recorder
DVD-RW(VR)
Title List
►
►
►
►
Set Top Box Control
1. With a disc inserted and the unit in Stop mode, press the MENU button
on the remote control.
CM Skip Time
: 15 Sec
:6Hours
:8Hours
: Off
Playlist
Disc Manager
Timer Rec.
Setup
EP Mode Time
Chapter Creator
Quick Recording
2. Select Setup using the ▲▼ buttons, then press the ENTER or ►
button.
Anynet+(HDMI-CEC) : On
You can't use the Setup functions while playing a disc.
3. Select System using the ▲▼ buttons, then press the ENTER or ►
MOVE
ENTER
RETURN
EXIT
button.
4. Select desired option using the ▲▼ buttons, then press the ENTER
or ► button.
EP Mode Time will be displayed.
5. Select the desired menu using the ▲▼ buttons, then press the ENTER
or ► button.
▌Automatic Chapter Creation
This function works for DVD-RW (Video) and DVD-R discs only.
System
DVD-Recorder
DVD-RW(V)
1. With a disc inserted and the unit in Stop mode, press the MENU button
on the remote control.
Title List
►
►
►
►
Set Top Box Control
CM Skip Time
Disc Manager
Timer Rec.
Setup
: 15 Sec
2. Select Setup using the ▲▼ buttons, then press the ENTER or ►
button.
You can't use the Setup functions while playing a disc.
EP Mode Time
: 6 Hours
Chapter Creator
Quick Recording
Off
On
Anynet+(HDMI-CEC) : On
3. Select System using the ▲▼ buttons, then press the ENTER or ►
button.
MOVE
ENTER
RETURN
EXIT
System menu will be displayed.
4. Select Chapter Creator using the ▲▼ buttons, then press the ENTER
or ► button.
Chapter Creator items will be displayed.
5. Select On using the ▲▼ buttons, then press the ENTER button.
• Off : Select this option when you do not want to create chapters.
• On : Select this option when you want to create chapters.
English - 29
Download from Www.Somanuals.com. All Manuals Search And Download.
■
■
Set the chapter creator to on and then start recording. Stopping
the recording will automatically create a chapter menu.
This function only works for normal recording.
- After the recording has begun, the “Do you want to create the
chapter menu after this recording?” message appears for 10
seconds. Select Yes or No.
- Selecting Yes will create a new chapter menu while selecting No
will not.
- A new chapter is created according to the selected recording
mode. A chapter will be about 5 minutes long in XP and SP, and
about 15 minutes long in LP and EP mode.
■
■
To display the created chapters and finalize the disc, press the
DISC MENU button. The chapters menu appears.
The Automatic Chapter Creation function does not work during
Timer Recording or when you turn the power off.
▌Quick Recording Setting
System
DVD-Recorder
DVD-RW(VR)
It takes about 10 seconds for a disc to load (initialize) every time
you turn on the unit. To bypass this initialization process, you can
set the Quick Recording feature to On. This enables you to record
immediately without having to wait for the disc to load.
Title List
Playlist
►
►
►
►
►
►
Set Top Box Control
CM Skip Time
: 15 Sec
: 6 Hours
: Off
EP Mode Time
Disc Manager
Chapter Creator
Quick Recording
Timer Rec.
Setup
: Off
1. With a disc inserted and the unit in Stop mode, press the MENU button
on the remote control.
Anynet+(HDMI-CEC) : On
2. Select Setup using the ▲▼ buttons, then press the ENTER or ►
button.
MOVE
ENTER
RETURN
EXIT
You can't use the Setup functions while playing a disc.
3. Select System using the ▲▼ buttons, then press the ENTER or ►
button.
System menu will be displayed.
4. Select Quick Recording using the ▲▼ buttons, then press the
ENTER or ► button.
Quick Recording menu will be displayed.
5. Select On using the ▲▼ buttons, then press the ENTER or ► button.
■
The Quick Recording is set to Off as default.
▌Anynet+(HDMI-CEC)
System
DVD-Recorder
No Disc
Anynet+ is a function that can be used to operate the recorder using
a Samsung TV remote control, by connecting the DVD Recorder to
a SAMSUNG TV using an HDMI Cable. (see page 16) (This is only
available with SAMSUNG TVs that support Anynet+.)
Timer Rec.
►
►
►
►
►
Set Top Box Control
CM Skip Time
: 15 Sec
: 6 Hours
: Off
Setup
EP Mode Time
Chapter Creator
Quick Recording
: Off
Off
Anynet+(HDMI-CEC) :
On
1. With the unit in Stop mode/No Disc mode, press the MENU button on
the remote control.
MOVE
ENTER
RETURN
EXIT
2. Select Setup using the ▲▼ buttons, then press the ENTER or ► button.
3. Select System using the ▲▼ buttons, then press the ENTER or ►
button. The system menu will be displayed.
4. Select Anynet+(HDMI-CEC) using the ▲▼ buttons, then press the
ENTER or ► button.
Anynet+(HDMI-CEC) items will be displayed.
5. Select On using the ▲▼ buttons, then press the ENTER or ► button.
For using Anynet+(HDMI-CEC)
1. Connect the recorder to a Samsung TV with an HDMI cable.
(See page 16)
2. Set the Anynet+(HDMI-CEC) to “On” on your DVD Recorder.
(see above)
3. Set the Anynet+ function on your TV.
(See the TV instruction manual for more information.)
English - 30
Download from Www.Somanuals.com. All Manuals Search And Download.
• You can operate the DVD Recorder by using TV remote control.
(TV buttons that can be used to control the DVD Recorder :
and buttons, button)
,
,
,
,
~
DVDR
View TV
• When you press Anynet+ button on the TV's remote control, the OSD to
the left will appear.
DVDR Menu
DVDR Operation
Receiver : Off
Setup
-
DVDR Operation : Same as ANYKEY button (
) on the DVD Recorder
remote control.
- DVDR Menu : Same as MENU button (
) on the DVD Recorder
Move
Enter
Exit
remote control.
■
By pressing the PLAY button of the recorder while watching TV, the
TV screen will change to the play screen.
TV Menu
■
■
If you play a DVD when the TV power is off, the TV will power On.
If you turn the TV off, the DVD Recorder will power off automatically.
(When the DVD recorder is recording, it can't be powered off.)
■
If you change HDMI to other sources(Composite, Component,
RF... etc) on your TV while playing a DVD disc, the DVD Recorder
will stop playing. The DVD Recorder may keep playing certain discs
based on their content.
Clock Set
DVD-Recorder
No Disc
Manual Clock Set
This menu is used to set the current time. You must set the time first
to use timer recording.
Timer Rec.
1. With the unit in Stop mode/No Disc mode, press the MENU button on
the remote control.
2. Select Setup using the ▲▼ buttons, then press the ENTER or ► button.
Setup
Month
Day
01
Year
2007
Hour Minute AM/PM
▲
01
▼
MON
12
00
AM
3. Select Clock set using the ▲▼ buttons, then press the ENTER or ► button.
Clock set menu will be displayed.
MOVE
ENTER
RETURN
EXIT
Select the current date and time (Month, Day, Year, Hour, Minute and
AM/PM) using the ▲▼◄ ► or number buttons and then press the
ENTER button.
When the current time is stored in memory and the set is powered off, the
current time will appear in the front panel display.
▲▼ : Sets the value
You can set the value using the number (0~9) buttons.
◄ ►: Moves to items
■
The Menus are slightly different depending on whether a disc is
inserted or not. The menus described on the next few pages are
with no disc in the unit.
■
The menus are not available during playback or recording.
Language Setting
Language
If you set the language options in advance, they will come up
automatically every time you watch a movie.
DVD-Recorder
No Disc
Timer Rec.
A
ud
io
itle
en
O
r
i
gn
i al
1. With the unit in Stop mode/No Disc mode, press the MENU button on
the remote control.
2. Select Setup using the ▲▼ buttons, then press the ENTER or ► button.
3. Select Language using the ▲▼ buttons, then press the ENTER or ►button.
English
Setup
S
u
b
t
Français
Deutsch
D
i
s
c
Me
n
u
O
n
-S
c
r
e
M
e
n
u
Español
I
ta
li
a
no
Nederlands
The language setup menu will be displayed.
Korean
4. Select the sub menu(Audio, Subtitle, Disc Menu, On-Screen Menu)
and press the ENTER or ► button using the ▲▼ buttons.
• Audio : For the disc audio language.
MOVE
ENTER
RETURN
EXIT
• Subtitle : For the disc subtitles.
• Disc Menu : For the disc menu contained on the disc.
• On-Screen Menu : For the unit menu of your DVD recorder.
5. Select the desired language using the ▲▼ buttons, then press the
ENTER or ► button.
■
■
If the selected language is not recorded on the disc, the original
pre-recorded language is selected.
The selected language will only appear if it is supported on the disc.
English - 31
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Up the Audio Options
You can connect the DVD-R157 to an external audio amplifier or a
Home Theater system.
Audio
DVD-Recorder
No Disc
Timer Rec.
This allows you to setup the audio device and sound status settings
depending on the audio system in use.
►
►
►
Digital Output : PCM
DTS : Off
Setup
Dynamic Compression
:
On
1. With the unit in Stop mode/No Disc mode, press the MENU button on
the remote control.
2. Select Setup using the ▲▼ buttons, then press the ENTER or ►
MOVE
ENTER
RETURN
EXIT
button.
3. Select Audio using the ▲▼ buttons, then press the ENTER or ►
button.
4. Select the sub menu(Digital Output, DTS, Dynamic Compression)
using the ▲▼ buttons, then press the ENTER or ► button.
Select the item that matches the audio connection you’ve selected
on pages 21~23(Method 1, 2 and 3).
Digital Output
Audio
DVD-Recorder
No Disc
• PCM : Converts to PCM(2CH) 48kHz audio.
Timer Rec.
Digital Output :
PCM
Select PCM if your amplifier system is stereo and/or Dolby Prologic.
DTS
: itstream
B
►
Setup
Dynamic Compression
: On
• Bitstream : Outputs Bitstream.
Select Bitstream if your amplifier system supports multi channel digital
audio surround decoding such as Dolby Digital and/or DTS.
MOVE
ENTER
RETURN
EXIT
DTS
Audio
DVD-Recorder
No Disc
• On : Outputs DTS bitstream. (via Digital Audio Output)
Select DTS when connecting to a digital amp with DTS decoder.
Timer Rec.
►
Digital Output : PCM
DTS :
Setup
Off
On
• Off : Doesn’t output DTS bitstream.
Dynamic Compression
:
•
When DTS soundtrack is played, sound is not output from Analog Audio Output.
MOVE
ENTER
RETURN
EXIT
Dynamic Compression
Audio
DVD-Recorder
No Disc
This is only active when a Dolby Digital signal is detected.
Timer Rec.
►
►
Digital Output : PCM
DTS : Off
• On : When movie soundtracks are played at low volume or from small
speakers, the system can apply appropriate compression to make low-
level content more intelligible and prevent dramatic passages from
getting too loud.
Setup
Dynamic Compression
Off
On
• Off : You can enjoy the movie with standard Dynamic Range.
MOVE
ENTER
RETURN
EXIT
5. Select the desired item(PCM, Bitstream, DTS-Off, DTS-On, Dynamic
Compression-Off or Dynamic Compression-On) using the ▲▼
buttons
Then press the ENTER or ► button.
English - 32
Download from Www.Somanuals.com. All Manuals Search And Download.
Video(Display) Setting
This allows you to set up the TV screen settings.
▌TV Aspect
Video
DVD-Recorder
No Disc
1. With the unit in Stop mode/No Disc mode, press the MENU button.
2. Select Setup using the ▲▼ buttons, then press the ENTER or ► button.
3. Select Video using the ▲▼ buttons, then press the ENTER or ► button.
4. Select TV Aspect using the ▲▼ buttons, then press the ENTER or ► button.
Timer Rec.
TV Aspect
:
4:3 Letter Box
4:3 Pan-Scan
Setup
Input Level
:
►
►
►
16:9 Wide
:
Black Level
3D Noise Reduction
HDMI/DVI Resolution
DivX(R) Registration
: Off
: 480P
5. Select the desired item(4:3 Letter Box, 4:3 Pan-Scan or 16:9 Wide)
using the ▲▼ buttons.
MOVE
ENTER
RETURN
EXIT
Then press the ENTER or ► button.
If you have a 4:3 standard TV
• 4:3 Letter Box : Select when you want to see the total 16:9 ratio screen
DVD supplies, even though you have a TV with a 4:3 ratio screen. Black
bars will appear at the top and bottom of the screen.
• 4:3 Pan-Scan : Select this for a conventional size TV when you want to
see the central portion of the 16:9 screen. (Extreme left and right side of
movie picture will be cut off.)
If you have a wide screen TV or 4:3 standard TV with a wide-screen mode
• 16:9 Wide : You can view the full 16:9 picture on your widescreen TV.
▌Input Level
Video
DVD-Recorder
No Disc
Adjusts the level of the input signal.
Timer Rec
.
►
TV Aspect
: 16:9 Wide
Darker
Setup
Input Level
Lighter
: Off
• Darker : If you feel the screen is too light and you want to make the
screen darker.
Black Level
►
►
►
3D Noise Reduction
HDMI/DVI Resolution
DivX(R) Registration
: 480P
• Lighter : If you feel the screen is too dark and you want to make the
screen lighter.
MOVE
ENTER
RETURN
EXIT
▌Black Level
Video
DVD-Recorder
No Disc
Adjusts the black level of the screen.
Timer Rec.
►
►
TV Aspect
Input Level
Black Level
: 16:9 Wide
: Darker
Setup
• 0 IRE : Select this when you want a darker screen.
• 7.5 IRE : Select this when you want a lighter screen.
0 IRE
3D Noise Reduction 7.5 IRE
►
►
HDMI/DVI Resolution
DivX(R) Registration
: 480P
■
Black level function is not available in the progressive scan mode.
MOVE
ENTER
RETURN
EXIT
▌3D Noise Reduction
Video
DVD-Recorder
No Disc
• On : Provides a cleaner picture through noise reduction (for recording).
Timer Rec.
►
►
►
►
TV Aspect
: 16:9 Wide
: Darker
: 7.5 IRE
Setup
Input Level
• Off : Normal
Black Level
Off
3D Noise Reduction
HDMI/DVI Resolution
DivX(R) Registration
On
MOVE
ENTER
RETURN
EXIT
English - 33
Download from Www.Somanuals.com. All Manuals Search And Download.
▌HDMI/DVI Resolution
This setting is used when the unit is connected by HDMI or DVI to
Display devices (TV, projector, etc).
Video
DVD-Recorder
No Disc
Timer Rec.
►
TV Aspect
: 16:9 Wide
: Darker
: 7.5 IRE
: Off
• 480p : 720 x 480
• 720p : 1280 x 720
• 1080i : 1920 x 1080
►
Setup
Input Level
►
Black Level
►
3D Noise Reduction
HDMI/DVI Resolution
DivX(R) Registration
480P
720P
• Connect the DVD-R157 to your TV via HDMI or DVI. Set your TV's input
to HDMI or DVI.
1080i
MOVE
ENTER
RETURN
EXIT
• Press the P.SCAN button while the unit is in stop mode to select the
output resolution.
- If your TV is connected the HDMI or DVI cable, the output resolution
mode changes in the following sequence each time you press the
P.SCAN button:
480p 1080i.
720p
ꢁ ꢁ ꢁ
- If your TV is connected the AV or component cables(without HDMI/DVI
cable), the output resolution mode toggles 480p/480i in turn.
▌DivX(R) Registration
Please use the Registration code to register your DVD Recorder with
the DivX(R) Video On Demand format.
Video
DVD-Recorder
No Disc
Timer Rec.
►
TVAspect
:16:9Wide
DivX(R) Video On Demand
►
Set
►
Your registration code is :
DTFJXHFA
►
■
IRE: Short for the Institute of Radio Engineers. An IRE unit is a
relative unit of measure equaling 1/140th of the peak-to-peak (p-p)
video amplitude.
►
►
OK
MOVE
ENTER
RETURN
EXIT
English - 34
Download from Www.Somanuals.com. All Manuals Search And Download.
Parental Control
Parental Control
DVD-Recorder
No Disc
Timer Rec.
Password
Off
Setup
On
The Parental Control function works in conjunction with DVDs that have
been assigned a rating - which helps you control the types of DVDs that
your family watches. There are up to 8 rating levels on a disc.
1. With the unit in Stop mode/No Disc mode, press the MENU button on the
remote control.
MOVE
ENTER
RETURN
EXIT
2. Select Setup using the ▲▼ buttons, then press the ENTER or
3. Select Parental Control using the ▲▼ buttons, then press the ENTER or
button.
►
button.
►
4. The first time the Parental Control is accessed, the ‘Create the
Password’ message will be displayed.
Create a 4-digit password using the 0 to 9 buttons on the remote
control.
5. The “Confirm the password” message will be displayed.
Enter your password again using the 0 to 9 buttons on the remote
control.
6. Press the ENTER or ► button, and then select On using the ▲▼
buttons.
The Parental Control screen appears.
▌
Setting the Rating Level
Parental Control
Level 8 Adults
:
DVD-Recorder
No Disc
1. Select Rating Level using the ▲▼ buttons.
Timer Rec.
Setup
Password
Level
7
Rating Level
Change Passwor
:
2. Press the ENTER or ► button.
Level
Level
Level
Level
Level
6
5
4
3
2
3. Select the desired Level you want using the ▲▼ buttons, then press
the ENTER or ► button.
For example, if you select up to Level 6, discs that contain Level 7, 8
will not play. A higher number indicates that the program is intended for
adult use only.
Level 1 Kids
MOVE
ENTER
RETURN EXIT
▌Changing the Password
Parental Control
DVD-Recorder
No Disc
1. Select Change Password using the ▲▼ buttons.
Timer Rec.
►
Password
: On
: Level 8 Adults
Setup
►
►
Rating Level
2. Press the ENTER or ► button.
The “Enter the password” message will be displayed.
Change Password
3. Enter the 4-digit password using the 0 to 9 buttons on the remote
control.
4. The “Confirm the password” message will be displayed.
Enter your password again using the 0 to 9 buttons on the remote
control.
MOVE
ENTER
RETURN
EXIT
■
If you forgot your password, remove the disc. Press the INPUT
SEL. and REC MODE buttons on the front panel of the DVD
Recorder simultaneously for 5 seconds or more when the power
is on. All settings including the password will revert to the factory
settings.
English - 35
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording
This section explains various DVD recording methods.
This unit can record on various types of discs. Before recording,
read the following instructions and select the disc type according to
your preference.
Recordable discs
This recorder can record on the following discs.
DVD-RAM
DVD-RW
DVD-R
DVD+RW
DVD+R
• DVD±RWs and DVD-RAMs are rewritable.
• DVD±Rs are non-rewritable
▌Compatibility between Samsung and Other manufacturer's Recorders
Disc
Types
Recording Recording
Additional Recording in
Samsung Recorder
Recordable
Finalizing
format
Device
Samsung
Other Company
X
X
DVD-
RAM
VR Mode
Recordable
finalized
not finalized
finalized
not finalized
finalized
not finalized
finalized
not finalized
finalized
not finalized
finalized
not finalized
X
Not recordable
Recordable
Not recordable
Recordable
Not recordable
Recordable
Not recordable
Not recordable
Not recordable
Recordable
Samsung
Other Company
Samsung
VR Mode
V Mode
DVD-RW
Other Company
Samsung
DVD-R V Mode
Not recordable
Not recordable
Recordable
Other Company
Samsung
Other Company
DVD+RW
DVD+R
-
-
X
Not recordable in some cases
Not recordable
Recordable
finalized
not finalized
finalized
Samsung
Not recordable
Other Company
not finalized Not recordable in some cases
■
■
Finalize
- This closes the DVD±R/-RW and no additional recording can be
done.
Unfinalize
- This allows additional recording on a DVD-RW disc originally
recorded on the DVD-R157.
- A DVD-RW disc that has been recorded by DAO(Disc At once) in
a PC cannot be unfinalized.
- A DVD-RW disc that has been recorded in Video Mode of
another manufacturer's recorder cannot be unfinalized.
- A DVD±R disc cannot be unfinalized.
English - 36
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording Formats
DVD-RAM
Since available functions differ depending on the disc type, select a
disc that best fits your preference. When you insert an unused disc,
the following message appears.
Unformatted Disc
Do you want to format this disc?
• DVD-RAM : Use after formatting the disc.
• DVD±RW/+R : Use after initializing the disc.
In case of DVD-RW disc, you can change the mode.Refer to Formatting
a Disc on page 70.
Yes
No
• DVD-R : Formatting disc is unnecessary.
DVD±RW/+R
▌DVD-RW(Video mode)/-R
• Chapters will be created automatically when you finalize recording on
DVD-R/DVD-RW discs in Video mode.
• Simple editing (erasing titles/changing title name).
Uninitalized Disc
Do you want to initialize this disc?
Yes
No
▌DVD-RAM/-RW(VR mode)
• This mode involves multiple editing functions (such as deletion of the
whole title, partial deletion of a title, etc.).
• Various editing options using a created Playlist.
▌DVD+RW
• You can also make your own chapters on DVD+RWs and edit them
using the Chapter Edit menu. (see pages 63~64.)
■
You can initialize discs automatically using EZ REC MODE.
(See page 46)
English - 37
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording Mode
Select one of four record modes by pressing the REC MODE button
repeatedly for the desired recording time and picture quality while
the unit is in Stop mode.
In general, picture quality improves as the recording time decreases.
In FR mode, the most suitable record mode is selected automatically
according to the remaining time on the disc and length of the timer
recording set.
You can select only one mode from XP, SP, LP and EP for timer
recording.
Recording Times Data
Mode
Characteristic
Rates
XP
Select when the video Approx. 1 hour
(high quality mode)
quality is important.
Select to record in
standard
about 8 Mbps
SP
Approx. 2 hours
about 4 Mbps
(standard quality mode)
quality.
Select when a long
recording time is
required.
LP
Approx. 4 hours
about 2 Mbps
(long recording mode)
Approx. 6 hours/
about 1.2 Mbps
Approx. 8 hours/
about 0.8 Mbps
Select when a longer
recording time is
required.
EP
(extended mode)
FR
For timer recording only Approx 1 to 8 hours
Approx 0.8 to 8Mbps
(Flexible Recording) see page 44.
• The dual layer DVD±Rs have approximately double capacity than single
layer DVD±Rs. (See page 47.)
Unrecordable video
Video with copy protection cannot be recorded on this DVD
Recorder. When the DVD Recorder receives a copy guard signal
while recording, recording stops and the following message appears
on the screen.
You cannot record copy protected movie.
English - 38
Download from Www.Somanuals.com. All Manuals Search And Download.
Concerning Copy Control Signals
TV broadcasts that contain copy control signals may have one of the
following three signal types, COPY-Free, Copy-Once and Copy-Never. If
you want to record a copy-once type program, use a DVD-RW disc with
CPRM in VR Mode. You can also use DVD-RAM discs.
('O' : Supported, '-' : Not Supported)
Signal type
Copy-Free
O
Copy-Once
O*
Copy-Never
-
Media
DVD-RAM
(Ver.2.0)
DVD+RW
DVD+R
DVD-RW (Ver.1.1)
DVD-RW (Ver.1.1)
with CPRM
VR mode
O
O
O
-
-
-
-
-
-
O
O
O*
-
-
-
DVD-R
When a “Copy Once” recording has been made, recording cannot be
done anymore.
*compatible with CPRM.
Content Protection for Recordable Media (CPRM)
ꢀ
CPRM is a mechanism that ties a recording to the media on which it is
recorded. It is supported by some DVD recorders, but not by many DVD
players. Each blank recordable DVD has a unique 64-bit media ID etched
in the BCA(Burst Cutting Area). When protected content is recorded onto
the disc, it can be encrypted with a 56-bit C2 (Cryptomeria) cipher derived
from the media ID.
During playback, the ID is read from the BCA and used to generate a key to
decrypt the contents of the disc. If the contents of the disc are copied to other
media, the ID will be absent or wrong and the data will not be decryptable.
▌About the INFO Button
The INFO function allows you to view the current status and
progress of playback and recording. When recording on a used
disc, make sure that there is enough disc space for recording.
ꢀ
Press the INFO button.
The disc information display window appears.
ꢀ
ꢃ
DVD-RW(VR)
Disc Name
Disc Info
ꢄ
Disc
1.Disc Type
2. Current information display status
3. Disc Name
4. Total Title : Total number of titles
5. Total Playlist : Total number of Playlists
6. Recordable Time : The longest continuous recording time in each of the
record modes(approximate)
ꢉ
Total Title
Total Playlist
15
1
ꢈ
ꢇ
ꢆ
Recordable Time 02: 12 SP
Protection
Not Protected
Screen
AV1
JAN 01 2007 MON
12:00 AM
ꢅ
ꢂ
7. Date : Current date
8. Time : Current time
■
■
■
Items in the display differ depending on the disc type or the
recording format.
With DVD-RAMs or DVD±RWs, you can free up disc space by
erasing titles.
Press the INFO button again with the unit in playback or
recording, then you can check the current status.
English - 39
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording from External Equipment
Record Mode
XP (01:11)
Before you start
Check that the disc has enough available space for the recording.
Adjust the recording mode.
ꢀ
1. Press the OPEN/CLOSE button and place a recordable disc on the
disc tray.
2. Press the OPEN/CLOSE button to close disc tray.
Recording : AV1
Wait until "LOAD" disappears from the front panel display
3. Press the INPUT SEL. button to select the input source according to
the connection you made.
The front panel display changes in the following sequence:
AV1 DV
AV2
ꢁ ꢁ ꢁ
4. Press the REC MODE button repeatedly, to select the recording
speed(quality).
SP XP
LP
EP
ꢁ ꢁ ꢁ ꢁ
5. Press the REC button.
To pause recording
Press the PLAY/PAUSE ( ) button to pause recording in progress.
Press the PLAY/PAUSE ( ) button again to resume recording.
To stop recording
Press the STOP ( ) button to stop or finish recording in progress.
• When using DVD-RAM/DVD±RW/ DVD±R discs, the message ‘Updating
the information of disc. Please wait for a moment.’ is displayed.
■
■
■
■
■
■
■
You can not change the recording mode and input source during
recording.
Recording will stop automatically if there is no free space left for
recording.
Up to 99 titles can be recorded onto a DVD-RAM/-RW/-R disc,
and up to 48 titles onto a DVD+RW/+R disc.
Recording will stop automatically if a copy protected image is
selected.
If you are using a Cable Box(no antenna), you cannot watch a
different cable TV program from the one you're recording.
DVD-RAM/DVD±RW/ DVD+R discs must be formatted before
starting to record. Most new discs are sold unformatted.
Do not use DVD-R authoring discs with this unit.
English - 40
Download from Www.Somanuals.com. All Manuals Search And Download.
Copying from a Camcorder
You may control a Digital Camcorder using the IEEE1394 (DV)
interface.
Record Mode
XP (01:11)
Before you start
Check that the disc has enough available space for the recording.
Adjust the record mode. See page 25 to see how to connect the
camcorder to your DVD recorder.
DV
1. Press the OPEN/CLOSE button, and place a recordable disc on the
disc tray.
2. Press the OPEN/CLOSE button to close the disc tray.
Wait until “LOAD” disappears from the front panel display.
3. Press the REC MODE button repeatedly to select the recording
speed(quality).
The DV device is connected
MOVE SELECT
SP XP
LP
EP
ꢁ ꢁ ꢁ ꢁ
RETURN
4. Press the INPUT SEL. button to select DV.
If the input is set to DV, a playback/record menu that enables Digital
camcorder control appears on the top of the screen.
5. Select the PLAY (
) icon on the upper part of the screen to playback
the camcorder and find the starting position to copy.
6. To start recording, select REC(
) icon in the top side of the screen
using the ◄ ► buttons, then press the ENTER button.
To stop recording
Press the STOP (
) button to stop or finish recording in progress.
• When using DVD-RAM/DVD±RW/ DVD±R discs, the message ‘Updating
the information of disc. Please wait for a moment’ is displayed.
■
■
■
■
You can not change the record mode and input source while
recording.
Recording will stop automatically if there is no free space left for
recording.
Up to 99 titles can be recorded onto a DVD-RAM/-RW/-R disc,
and up to 48 titles onto a DVD+RW/+R disc.
DVD-RAM/DVD±RW/ DVD+R discs must be formatted before
starting to record.
Most new discs are sold unformatted.
■
■
Do not use DVD-R authoring discs with this unit.
To access on-screen controls during recording, press the ◄ or ►
buttons.
■
When copying from a camcorder and the end of the tape is
reached (no Video), the screen may turn blue or purple.
English - 41
Download from Www.Somanuals.com. All Manuals Search And Download.
Making a One Touch Recording (OTR)
You can set the DVD Recorder to record in preset increments by
pressing the REC button repeatedly.
1. If you want to record from a connected external component, press the
INPUT SEL. button to select an appropriate external input(AV1, AV 2 or
DV).
2. Press the REC button to start recording.
3. Press the REC button to adjust the recording time.
0:30 off
1:00
1:30
2:00
3:00
4:00
ꢁ ꢁ ꢁ ꢁ ꢁ ꢁ ꢁ
■
The timer counter decreases to 0:00, then the DVD Recorder
stops recording.
After finishing recording, the DVD Recorder will turn off
automatically.
To stop recording
Press the STOP( ) button. The message “Press STOP button once
more to cancel Timer Record.” is displayed.
Press the STOP( ) button again to stop recording.
English - 42
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting a Timer Recording
Timer Record
DVD-Recorder
DVD-RW(VR)
Title List
►
►
Timer Record
Scheduled Record List
Playlist
Disc Manager
Timer Rec.
Setup
You need to set the Clock (Setup – Clock Set) before proceeding
with a timer recording. (See page 31)
1. Press the OPEN/CLOSE button, and place a recordable disc on the
MOVE
ENTER
RETURN
EXIT
disc tray.
2. Press the OPEN/CLOSE button to close the disc tray.
Wait until “LOAD” disappears from the front panel display.
If an unused DVD-RW disc is inserted, whether to initialize or not will
be asked first. (See page 37)
Scheduled Record List
Current Time 12:03 AM
DVD-Recorder
DVD-RW(VR)
No. Source Date
Start
No. 01
Start
End
Mode Edit
Source
Date
End
Mode
SP
3. Press the MENU button in Stop mode.
You can also set a timer recording via the TIMER button.
AV
1
01/01
12:03 AM
01:59 SP
02:03 AM
Recordable Time
:
Recordable Time : 01:59 SP
4. Press the ▲▼ buttons to select Timer Rec., and then press the
ENTER or ► button.
MOVE
ENTER
RETURN
EXIT
5. Press the ▲▼ buttons to select Timer Record, and then press the
ENTER or ► button.
The Timer Record Input items are displayed.
6. Fill in the items using the ▲▼◄ ► buttons.
◄ ► : Moves to the previous/next item,
▲▼or 0~9 : To set or change items in the Scheduled Record List Menu.
• Source: Select the video input source (AV 1, AV 2) you want to make
a timer recording of.
• Date: Date that the timer recording starts
- There are three options when setting the date. see below:
No. 01
To make a recording on a specific date, press the ▲▼ or number
buttons until the date you want appears.
ꢃ
Source
Date
Start
End
Mode
SP
AV
1
01/01
12:03 AM
01:59 SP
02:03 AM
To make a recording at the same time every day (MON-FRI), press
the ▲▼ buttons until MON-FRI appears.
ꢄ
ꢉ
Recordable Time
:
No. 01
Start
Source
Date
End
Mode
SP
To make a recording on a specific day of the week(Every SUN -
Every SAT), press the ▲▼ buttons until Sun’s….Sat’s appears.
AV
1
MON-FRI 12:03 AM
01:59 SP
02:03 AM
Recordable Time
:
• Start/End Time: Start and end time of the timer recording
No. 01
Start
Source
Date
End
Mode
SP
• Mode (Record mode)
XP : Approx. 1 hour
AV
1
Every SUN 12:03 AM
02:03 AM
SP : Approx. 2 hours
LP : Approx. 4 hours
EP : Approx. 6 hours or 8 hours
FR : See page 44.
Recordable Time
:
01:59 SP
■
When you are recording at EP mode on a DVD-RW(V)/-R disc,
it may not record the full 6 or 8 hours because the unit uses the
VBR(Variable Bit Rate) ENCODING system.
For example, if you record a Program with a lot of action, it uses a
higher bit rate which in turn consumes more disc memory.
7. Press the ENTER button.
• ( ) and Timer Set will appear on the front panel display. This means
that a timer recording is set.
• Recording is automatically performed when the set time is reached.
Scheduled Record List
Current Time 12:03 AM
DVD-Recorder
DVD-RW(VR)
No. Source Date
Start
End
Mode Edit
►
►
01
02
AV
1
01/ 01
/
05:00 AM
:
07:00 AM
:
SP
Recordable Time : 01:59 SP
MOVE
ENTER
RETURN
EXIT
English - 43
Download from Www.Somanuals.com. All Manuals Search And Download.
■
■
If the timer settings overlap
The first program has priority. After recording of the first program
is complete, the second program starts being recorded.
The timer recording time may differ from the set time depending
on the disc and the overall timer recording status (for example,
recording times overlapping, or when the previous recording ends
within 3 minutes of the start of the next recording.)
■
will start blinking if Timer Recording is not ready to start.
Flexible Recording (for Timer Recording only)
In FR mode, the most suitable recording mode is selected
automatically, according to the remaining time on the disc and the
length of the timer recording set.
The FR mode recording setup is the same as Timer Recording setup.
When setting the Rec mode in step 6, select FR Mode. (See page 43)
Editing the Scheduled Record List
Scheduled Record List
Current Time 12:03 AM
DVD-Recorder
DVD-RW(VR)
No. Source Date
Start
End
Mode Edit
►
►
01
02
AV
1
01/ 01
/
05:00 AM
:
07:00 AM
:
SP
You can change timer record settings using the scheduled record
list menu.
1. Press the MENU button in STOP mode.
Recordable Time : 01:59 SP
2. Press the ▲▼ buttons to select Timer Rec., and then press the
MOVE
ENTER
RETURN
EXIT
ENTER or ► button.
Scheduled Record List
Current Time 12:03 AM
DVD-Recorder
DVD-RW (VR)
3. Press the ▲▼ buttons to select Scheduled Record List, and then
press the ENTER or ► button.
No. Source Date
Start
End
Mode Edit
Edit
4. Press the ▲▼ buttons to select the number of the Scheduled Record
List you want to edit, and then press the ENTER or ► button.
The Edit and Delete items are displayed.
►
01
02
03
AV
AV
1
1
01/ 01
01/ 03
/
05:00 AM
12:06 AM
:
07:00 AM
02:06 AM
:
SP
SP
Delete
►
5. Press the ▲▼ buttons to select Edit, and then press the ENTER or ►
button.
The Timer Record Input item is displayed.
Recordable Time : 01:59 SP
MOVE
ENTER
RETURN
EXIT
Edit the items you want to modify. See the Timer Record section for
more information on Timer Record Input items. (See page 43)
6. Move through the items with the ◄ ► buttons and change the settings
with ▲▼ or number buttons and press the ENTER button.
7. Press the MENU button after the operation is finished.
The menu screen will disappear.
English - 44
Download from Www.Somanuals.com. All Manuals Search And Download.
Deleting the Scheduled Record List
Scheduled Record List
Current Time 12:03 AM
DVD-Recorder
DVD-RW (VR)
You can delete timer record list using the scheduled record list menu.
No. Source Date
Start
End
Mode Edit
No. 01
►
►
►
01
02
03
1. Press the MENU button in Stop mode.
Do you want to delete ’No.01’?
2. Press the ▲▼ buttons to select Timer Rec., and then press the
ENTER or ► button.
Yes
No
Recordable Time : 01:59 SP
3. Press the ▲▼ buttons to select Scheduled Record List, and then
press the ENTER or ► button.
MOVE
ENTER
RETURN
EXIT
4. Press the ▲▼ buttons to select the number of the timer recording you
want to delete, and then press the ENTER or ► button.
The Edit and Delete items are displayed.
5. Press the ▲▼ buttons to select Delete, and then press the ENTER or ► button.
6. Press the ◄ ► buttons to select Yes, and then press the ENTER button.
The selected entry will be deleted from the list.
■
You can not delete programs that are currently being recorded.
Recording the Scheduled Record List
When the start time in the Scheduled Record List is reached while
the unit is powered off, the unit will automatically power on and start
recording.
Press STOP button once more
to cancel Timer Record.
1. When the scheduled recording is operating, the program being
recorded will not display on TV.
• Power on TV using the TV remote control.
• Power off TV using the TV remote control if you don’t want to see the
program being recorded.
To stop recording
You cannot record copy protected movie.
Press the STOP ( ) button. The message “Press STOP button once
more to cancel Timer Record.” is displayed.
Press the STOP ( ) button again to stop recording.
■
■
If a copy protection signal is received during recording, recording
will stop.
If there is no free disc space or the disc is not recordable, recording
will not operate. (You can record after replacing the disc.)
▌Recording on Free Space
Title List
7/7
DVD+RW
This function is only available with DVD+RW discs. If existing titles are
deleted, free space will be created. When you operate the free space
function, on-air TV images will appear on the left side of the title list.
Free Space
No. Title
Length Edit
►
01 APR/19/2007 12:00 00:00:21
02 APR/19/2007 12:30 00:00:03
03 APR/20/2007 12:00 00:00:15
04 APR/20/2007 12:30 00:00:16
05 APR/21/2007 12:00 00:06:32
06 APR/21/2007 12:30 00:08:16
►
►
►
►
►
1. Press the TITLE LIST button in Stop mode. The Title List screen is
displayed.
Free Space
AV
SP
1
2. Press the ▲▼ button to select Free Space, then press the ENTER or
07 Free Space
Recording
► button. On-air TV images will appear on the left side of the title list.
MOVE
ENTER
RETURN
EXIT
3. Press the ENTER button.
English - 45
Download from Www.Somanuals.com. All Manuals Search And Download.
EZ REC MODE
This function allows you Initialize and Finalize a disc automatically.
1. With the unit in Stop/No Disc mode, press the EZ REC MODE button
on the remote control.
Press “On” to confirm EZ REC mode.
Otherwise press “Off”
2. Press the ◄ ► buttons to select On, and then press the ENTER
button.
On
Off
The EZ REC MODE is set up.
3. Insert a disc.
If the disc is new, it will initialize automatically.
4. Press the REC button.
5. EZ REC MODE will Automatically Finalize the disc under the following
conditions.
Disc Initialize (DVD-V)
Now, initializing..
- When you press the OPEN/CLOSE button on your DVD Recorder after
recording on at least 30% of the disc. The tray will open after the disc
has been finalized.
50%
- When the disc is full, it will finalize automatically and the Recorder will
remain in stop mode.
- When you make a timer recording and it occupies at least 30% of the
disc, the disc will finalize automatically and the Recorder will power off.
Please note that auto finalization will not work if the Recorder has more
than one Timer Recording set in the Scheduled Record List.
Disc Finalize
Processing..
50%
■
■
■
If you insert a new DVD-RW disc, it will be formatted in V mode
after auto initializing.
If you select off, you must initialize (see page 37) and finalize the
disc manually in the Disc Manager menu.(see page 71)
The length of Recording is different according to recording mode.
(see page 38)
English - 46
Download from Www.Somanuals.com. All Manuals Search And Download.
Playback
This section introduces basic playback functions and
playback by disc type.
Disc types that can be played
Disc Disc Recorded
Read the following information before playing a disc.
Disc Shape Max. Playing Time
Types Logo
content
Single sided(5”)
Double sided(5”)
Single sided(3.5”)
Double sided(3.5”)
Single sided(5”)
Single sided(3.5”)
Single sided(5”)
Single sided(3.5”)
Single sided(5”)
Single sided(3.5”)
Single sided(5”)
Single sided(3.5”)
240min
480min
Region code (DVD-Video only)
DVD-
VIDEO
VIDEO
AUDIO
80min
Both the DVD recorder and the discs are
coded by region. These regional codes must
match in order for the disc to play. If the codes
do not match, the disc will not play. The Region
Number for this recorder is described on the
rear panel of the recorder.
160min
74min
AUDIO-
CD
AUDIO
20min
-
JPEG
Images
JPEG
MP3
-
-
MP3
Audio
-
-
MPEG4
Movie
MPEG4
Logos of Discs that can be played
-
1hr (XP: Excellent Quality)
2hrs (SP: Standard Qualit
4hrs (LP: Long Playback)
6 or 8hrs (EP:Extended)
2hr (XP: Excellent Quality)
4hrs (SP: Standard Qualit
8hrs (LP: Long Playback)
12 or 16hrs (EP:Extended)
1hr (XP: Excellent Quality)
2hrs (SP: Standard Qualit
4hrs (LP: Long Playback)
6 or 8hrs (EP:Extended)
1hr (XP: Excellent Quality)
2hrs (SP: Standard Qualit
4hrs (LP: Long Playback)
6 or 8hrs (EP:Extended)
2hr (XP: Excellent Quality)
4hrs (SP: Standard Qualit
8hrs (LP: Long Playback)
11 or 15hrs (EP:Extended)
1hr (XP: Excellent Quality)
2hrs (SP: Standard Qualit
4hrs (LP: Long Playback)
6 or 8hrs (EP:Extended)
1hr (XP: Excellent Quality)
2hrs (SP: Standard Qualit
4hrs (LP: Long Playback)
6 or 8hrs (EP:Extended)
2hr (XP: Excellent Quality)
4hrs (SP: Standard Qualit
8hrs (LP: Long Playback)
11 or 15hrs (EP:Extended)
Single sided(5”)
(4.7GB)
D I G I T A L
Dolby Digital
DVD-
RAM
VIDEO
AUDIO
DTS
Digital Audio
Double
sided(5”)
(9.4GB)
Stereo
NTSC broadcast system
in U.S.A, Canada, Korea,
Japan,etc.
VIDEO
AUDIO
DVD-RW
DVD-R
5” (4.7GB)
Single
Layer(5”)
(4.7GB)
DivX
MP3
VIDEO
AUDIO
Dual
Layer(5”)
(8.5GB)
VIDEO
AUDIO
DVD+RW
DVD+R
5” (4.7GB)
Single
Layer(5”)
(4.7GB)
VIDEO
AUDIO
Dual
Layer(5”)
(8.5GB)
English - 47
Download from Www.Somanuals.com. All Manuals Search And Download.
▌Discs that cannot be played
• DVD-Video with a region number other than “1” or “ALL”
• 5” 2.6 GB and 5.2 GB DVD-RAM
• 3.9 GB DVD-R Disc for Authoring.
• A DVD±R/DVD-RW(V) disc which has been recorded and not finalized in
a different manufacturer's recorder.
• PAL discs
• DVD-ROM/PD/MV-Disc, etc.
• Video CD/CVD/SVCD/CD-ROM/CDV/CD-G/CD-I
■
■
This DVD recorder can only operate with discs that are compatible
with DVD-RAM Standard Version 2.0.
Playback and/or recording may not work for some types of discs,
or when specific operations, such as angle change and aspect
ratio adjustment, are being performed. Information about the discs
is written in detail on the box. Please refer to this if necessary.
■
Do not allow the disc to become dirty or scratched.
Fingerprints, dirt,dust,scratches or deposits of cigarette smoke on the
recording surface may make it impossible to use the disc for recording.
■
■
DVD-RAM/±RW/±R discs may not be able to play on some DVD players,
depending on the player, disc and the condition of the recording.
Discs with PAL programs recorded on them can not be recorded
on using this product.
Playing a Disc
1. Press the OPEN/CLOSE button.
The tray opens.
2. Place a disc gently into the tray with the disc’s label facing up.
For DVD-RAM discs, insert the printed side facing up.
3. Press the OPEN/CLOSE button to close the disc tray.
•
Your DVD Recorder closes the disc tray and loads the disc automatically.
• When the recorder is powered on and a disc is in the tray, the unit will
be activated and wait in Stop mode.
• Press the PLAY(
• If you want the unit to play automatically when it is powered off with a
disc in the unit, power on with the PLAY( ) button.
4. Press the STOP( ) button to stop playback.
) button to start playback.
■
When you stop playing the disc, the recorder remembers where you
stopped. When you press the PLAY button again, it will pick up where
you left off. (unless the disc is removed, the recorder is unplugged, or if
you do not press the STOP button twice.) This function is only applicable
to DVD-VIDEO, DVD-RAM, DVD±RW, DVD±R or audio CDs (CD-DA).
■
Do not move your DVD recorder while playing, as this may cause
damage to the disc.
■
■
Make sure to press the OPEN/CLOSE button to open or close the disc tray.
Do not push the disc tray while it is being opened or closed, as
this may cause a product malfunction.
■
■
Do not place foreign materials on or in the disc tray.
Some functions may perform differently or be disabled depending on the
disc type. If this occurs, refer to the instructions written on the disc case.
■
■
Be especially careful that children's fingers are not caught
between the disc tray and the tray chassis when it closes.
You must only insert one DVD disc at a time. Inserting two or
more discs will not allow playback and may cause damage to the
DVD player.
English - 48
Download from Www.Somanuals.com. All Manuals Search And Download.
▌Using the Disc Menu & Title Menu
Some discs contain a dedicated menu system that allow you to
select special functions for the title, such as chapters, audio track,
subtitles, film previews, information on characters, etc.
For DVD-VIDEO discs
Disc Menu : Press the DISC MENU button to enter the disc's menu.
• Move to the setup menu related to the playback operation.
•
You can select the audio language and the subtitles provided by the disc.
Title Menu : Press the TITLE MENU button to move to the title menu of
the disc.
• Use this button if the disc contains more than one title. Some type of
discs may not support the title menu function.
For DVD-RAM/DVD±RW/±R discs
Title List : Press the TITLE LIST button. The Title List is simply a list of
titles on a disc. If a title is deleted, that title cannot be played
again.
PLAY LIST : Press the PLAY LIST button. A playlist is a custom-made list
of titles. When one playlist is played, only the titles within the
playlist will play and then stop. Even if that playlist is deleted,
the original recording will not be deleted. (only VR mode)
▌Using the playback related buttons
Searching through a Chapter or Track
→
→
→
→
Fast 1(X 2)
Fast 3(X 8)
Fast 2(X 4)
Fast 4(X16)
DVD-VIDEO/
DVD-RAM/
DVD±RW/DVD±R
→
→
Fast 5(X 32)
Fast 1(X 2)
Fast 6(X128)
→
→
→
Fast 1
Fast 1
Fast 2
Fast 3
MPEG4
→
→
→
AUDIO CD
(CDDA)
Fast
Fast
2
8
Fast
Fast
4
2
¯
¯
¯
¯
During playback, press the SEARCH(
control.
) button on the remote
• You can scan the program in reverse.
• Press and hold the SEARCH(
default speed of fast 2.
) button, playback is done at the
• If you release the SEARCH(
normal speed.(Except CD-DA)
) button, playback is performed at a
• To return to normal playback speed, press the PLAY(
) button.
English - 49
Download from Www.Somanuals.com. All Manuals Search And Download.
■
No sound is heard during Scan(Search) mode except fast 1
playback (1.7X speed) mode.
■
■
■
For CD(CD-DA), You can hear sound during Scan mode.
You cannot hear audio while scanning an MPEG4.
The speed marked while scanning may be different from the
actual playback speed.
Searching Chapters or Tracks
During playback, press the SKIP(
) button on the remote control.
• If you press the SKIP(
) button, it moves to the beginning of the
chapter or track or marker (DVD-RAM,DVD-RW(VR mode).)
Pressing the button once again within 3 seconds returns to the
beginning of the previous chapter or track or marker (DVD-RAM,
DVD-RW(VR mode).)
• If you press the SKIP(
) button, it moves to the next chapter or title or
marker (DVD-RAM,DVD-RW (VR mode).)
▌Slow Motion Play
In Pause mode, press the SEARCH(
) button on the remote control.
• If you press the SEARCH(
) button,
Slow 3
→
→
Slow 1
Slow 2
• If you press the SEARCH(
) button,
→
→
Slow 1
Slow 2
Slow 3
• Press and hold the SEARCH(
) button during pause, and the disc
will play slowly at a 1/2 speed. If the button is released, the pause
operation will resume.
• To return to normal speed playback, press the PLAY(
) button.
■
■
The speed marked in this function may be different from the
actual playback speed.
Slow motion operates only in the forward direction on MPEG4
discs.
▌Step Motion Play
Press the STEP(
) button on the remote control in the still mode.
• Each time the button is pressed, a new frame will appear.
If you press the STEP(
If you press the STEP(
) button,
) button, the next frame will be activated.
) button.
the previous frame will be activated.
• To return to normal speed playback, press the PLAY(
■
Step motion operates only in the forward direction on MPEG4
discs.
English - 50
Download from Www.Somanuals.com. All Manuals Search And Download.
▌Using the ANYKEY Button
The ANYKEY function allows you to easily search for a desired
scene by accessing title, chapter, track, and time. You can also
change the subtitle and audio settings and set some features
including Repeat, Angle, and Zoom.
Moving to a Desired Scene Directly
If you want to move to a certain title, chapter or time use this
function.
DVD-VIDEO
Title
1/2
Chapter 1/20
Time
00:00:00
1. Press the ANYKEY button during playback.
Subtitle Off
Audio
ENG
D
2CH
2. Press the ▲▼ buttons to select the Title, Chapter or Time.
Repeat Off
Angle
Zoom
1/3
Off
3. Press the ◄ ► buttons or number (0~9) buttons to select the desired
scene and then press the ENTER button.
MOVE
CHANGE
In case of searching a time, Enter the time in the sequence of hours,
minutes, seconds using the number buttons. ◄ ► are not available.
■
■
The Time Search function does not operate with some discs.
To make the screen disappear, press the ANYKEY again.
Playing Repeatedly
DVD-VIDEO
Title
1/2
1. Press the ANYKEY button during playback.
Chapter 1/20
Time
00:01:05
2. Press the ▲▼ buttons to select Repeat and press the ◄ ► buttons to
select the Title or Chapter you want to play repeatedly.
Subtitle Off
Audio
ENG
D
2CH
Repeat Title
3. Press the ENTER button.
Angle
Zoom
1/3
Off
MOVE
SELECT
■
DVD-RAM, DVD-RW(VR mode), unfinalized DVD±R and
unfinalized DVD-RW (Video mode) do not repeat a chapter.
Playing a Certain Section Repeatedly
DVD-VIDEO
Title
1/2
Chapter
1/20
Time
00:01:05
1. Press the ANYKEY button during playback.
Subtitle
Audio
Off
ENG
D
2CH
2. Press the ▲▼ buttons to select Repeat and press the ► button to
select A-B.
Repeat
A-B
Angle
Zoom
1/3
Off
MOVE
SELECT
3. Press the ENTER button.
4. Press the ENTER button at the point where you want the repeat play to
start (A) and press it again at the point where you want the repeat play
to stop (B).
Repeat playback of the A-B section starts.
■
■
■
If you set point (B) before five seconds has lapsed, the prohibition
mark ( ) will appear.
You can also activate Normal Playback by pressing the CANCEL
button.
Audio CDs(CD-DA) and MP3 discs do not support the Repeat A-B
function.
English - 51
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting the Subtitle
DVD-VIDEO
Title
1/2
Chapter
1/20
Time
00:00:10
Subtitle
Audio
(VR mode)
Off
ENG
D
2CH
Subtitle languages may not work depending on the disc type. This is
only available during playback.
Repeat
Off
Angle
Zoom
1/3
Off
MOVE
CHANGE
1. Press the ANYKEY button during playback.
2. Press the ▲▼ buttons to select Subtitle and press the ◄ ► buttons to
select the desired subtitle language.
■
■
■
If the subtitles overlap, disable the caption function on your TV.
Some discs allow you to select the language for the disc menu only.
To make the screen disappear, press the ANYKEY again.
Selecting the Audio language
DVD-VIDEO
Title
1/2
Chapter
1/20
Time
00:00:10
Subtitle
Audio
Off
ENG
D
2CH
(VR mode)
Repeat
Off
Audio languages may not work depending on the disc type. This is
only available during playback.
Angle
Zoom
1/3
Off
CHANGE
MOVE
1. Press the ANYKEY button during playback.
2. Press the ▲▼ buttons to select Audio and press the ◄ ► buttons to
select the desired audio language.
■
■
Audio languages may be different because they are disc-specific.
Some discs allow you to select the audio language for the disc
menu only.
■
To make the screen disappear, press the ANYKEY again.
Using one Touch button
By pressing the audio button, you can access the Audio function
directly.
Changing the Camera Angle
When a DVD-VIDEO contains multiple angles of a particular scene,
you can select the Angle function.
DVD-VIDEO
Title
1/2
Chapter
1/20
Time
This is only available during playback.
If the disc contains multiple angles, the ANGLE mark appears on the
screen.
00:00:11
Subtitle
Audio
Off
ENG
D
2CH
Repeat
Off
Angle
Zoom
1/3
Off
1. Press the ANYKEY button during playback.
CHANGE
MOVE
2. Press the ▲▼ buttons to select Angle and press the ◄ ► buttons or
number(0~9) buttons to select the desired angle.
■
■
This function is disc-dependent, and may not work all DVDs.
This function does not work when a DVD has not been recorded
with a multicamera angle system.
■
To make the screen disappear, press the ANYKEY again.
English - 52
Download from Www.Somanuals.com. All Manuals Search And Download.
Zooming-In
1. Press the ANYKEY button during playback or pause.
2. Press the ▲▼ buttons to select Zoom, and then press the ENTER
button.
(
) will be displayed.
3. Press the ▲▼◄ ► buttons to move to the area you want to enlarge.
4. Press the ENTER button.
→
→
→
→
normal size
2X
4X
2X normal size
Using Bookmarks
(V mode)
This feature lets you bookmark sections of a DVD or DVD-R/-RW
1
2 - - - - - - - --
Bookmark
(V mode), so you can quickly find them.
Setting Bookmarks
ꢀ
1. Press the MARKER button during playback.
2. Press the MARKER button during playback. Press the ENTER button
when the desired scene appears.
The number 1 is displayed and the scene is memorized.
MOVE
PLAY
CANCEL
RETURN
3. Press the ◄ ► button to move to the next position.
4. Press the ENTER button when the desired scene appears.
The number 2 is displayed and the scene is memorized.
• Repeat above to bookmark other positions.
• You can bookmark up to 10 scenes.
■
■
When the disc tray is opened and then closed, bookmarks will
disappear.
The button display may differ depending on the disc type.
Playing Back a Bookmark
ꢀ
1
2
- - - - - - - --
Bookmark
1. Press the MARKER button during playback.
2. Press the ◄ ► buttons to select a bookmarked scene.
3. Press the ENTER or PLAY( ) button to start playing from the
selected scene.
MOVE
PLAY
CANCEL
RETURN
English - 53
Download from Www.Somanuals.com. All Manuals Search And Download.
Clearing a bookmark
ꢀ
1
2
-
4
5
6
- - - --
1. Press the MARKER button during playback
Bookmark
2. Press the ◄ ► buttons to select a bookmarked scene.
3. Press the CANCEL button to delete the selected bookmark.
MOVE
SELECT
RETURN
Using Markers
01 02 -- -- -- -- -- -- -- --
N
:
2
Marker
(VR mode)
Setting Markers
ꢀ
1. Press the MARKER button during playback.
2. Press the ENTER button when the desired scene appears.
The number 01 is displayed and the scene is memorized.
MOVE
PLAY
CANCEL
RETURN
3. Press the ◄ ► button to move to the next position.
4. Press the ENTER button when the desired scene appears.
The number 02 is displayed and the scene is memorized.
• DVD-RAM or DVD-RW (VR Mode) discs have the Marker function
instead of the Bookmark function.
The Marker function allows you to mark up to 99 scenes. Since the
scenes may be displayed as many different pages, numbering is
necessary.
If a disc in use is encoded with Disc Protect, Markers cannot be set or
deleted. Only playback is available.
Playing Back a Marker
ꢀ
01 02 -- -- -- -- -- -- -- --
N
:
2
Marker
1. Press the MARKER button during playback.
2. Press the ◄ ► buttons to select a bookmarked scene.
3. Press the ENTER or PLAY(
) button to start playing from the
selected scene.
• If you press the SKIP(
) button, it moves to the beginning of
the marker. Pressing the button once again within 3 seconds returns
to the beginning of the previous marker.
MOVE
PLAY
CANCEL
RETURN
• If you press the SKIP(
) button, it moves to the next marker.
Clearing a Marker
ꢀ
►
01 02 03 04 05 06 07 08 09 10
N 10
:
Marker
Marker
1. Press the MARKER button during playback.
2. Press the ◄ ► buttons to select a bookmarked scene.
Press the CANCEL button to delete the selected bookmark.
• When a marker is cleared while DVD-RAM/DVD-RW(VR mode) is
playing, marker numbers will change. For example, if the 7th marker
is cleared after ten markers are registered, the marker numbers after
the eighth will automatically move ahead by one and the 8th marker
becomes the 7th.
01 02 03 04 05 06 07 08 09 --
N
:
9
MOVE
PLAY
CANCEL
RETURN
English - 54
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing an Audio CD/MP3
Buttons on the Remote Control used for CD playback
ꢇ
ꢆ
1. ▲▼ : Selects a track (song).
2. ► : Plays the selected track (song).
ꢂ
ꢅ
ꢂ
ꢊ
3. ENTER(
) button : Plays the selected track (song).
4. RETURN(
) button: Moves to the folder to which the current song
belongs.
5. SKIP(
) button : Plays the next track.
ꢈ
6. SKIP(
) button : Returns to the beginning of the current track when
ꢃ
ꢃ
ꢋ
pressed during playback. If pressed again, your DVD recorder moves
to and plays the previous track. If you press this button within three
seconds after playback starts, the previous track will be played.
If you press this button after three seconds, the current track will be
replayed from the beginning.
ꢄ
ꢉ
7. SEARCH(
8. STOP(
/
) button : Fast Play (X2, X4, X8)
) : Stops a track(song).
) : Plays a track(song) or pauses playback.
9. PLAY/PAUSE(
10. ANYKEY: To select the sub menu on screen display (Repeat or Play
Option).
▌Playing an Audio CD(CD-DA)
Music List
01/15
CD
TRACK 1
No.
Title
Length
1. Insert an audio CD (CD-DA) into the disc tray.
The audio CD menu appears and the tracks (songs) are played
automatically.
2. Press the ▲▼ buttons to select the track you want to hear, and then
press the ENTER button or ► button.
01
002
003
TRACK
TRACK
TRACK
1
2
3
00:03:50
00:04:00
00:03:49
►
0:00:01
004
005
006
007
TRACK
TRACK
TRACK
TRACK
4
5
6
7
00:03:47
00:04:29
00:03:44
00:03:44
TRACK 1
CDDA
PLAY MODE
MOVE
ENTER
EXIT
RETURN
ꢄ ꢈ
Audio CD(CD-DA) Screen Elements
ꢀ
ꢃ
1. PLAY MODE icon
Music List
01/15
CD
TRACK 1
2. Current track (song) : Displays the number of the track currently being
played.
ꢉ
ꢇ
ꢆ
No.
Title
Length
01
002
003
TRACK
TRACK
TRACK
1
2
3
00:03:50
00:04:00
00:03:49
3. Displays the current play index and total track number.
4. Shows the operating state of a disc and the current playback time.
5. Displays the track list (song list) and the playing time of each track.
6. Button display.
►
0:00:01
004
005
006
007
TRACK
TRACK
TRACK
TRACK
4
5
6
7
00:03:47
00:04:29
00:03:44
00:03:44
TRACK 1
CDDA
PLAY MODE
MOVE
ENTER
EXIT
RETURN
English - 55
Download from Www.Somanuals.com. All Manuals Search And Download.
▌
Playing an MP3 Disc
Music List
01/11
MP3
SONGO1
1. Insert an MP3 disc into the disc tray.
No.
0
Title
ROOT
And press the ▲▼ buttons to select Disc Navigation, and then press
the ENTER or ► button.
SONGO1
002
003
SONGO2
SONGO3
►
0:00:15
2. Press the ▲▼ buttons to select Music, and then press the ENTER or
SONGO1
3.5MB
2004/08/26
004
005
006
SONGO4
SONGO5
SONGO6
► button.
MP3
The MP3 menu appears and the tracks(songs) are played
automatically.
PLAY MODE
MOVE
ENTER
EXIT
RETURN
3. Press the ▲▼ buttons to select the track (song) you want to hear, and
then press the ENTER button or ► button.
ꢄꢉꢈ
ꢃ
MP3 Screen Elements
ꢀ
Music List
01/11
MP3
1. PLAY MODE icon
SONGO1
No.
Title
2. Current track (song) : Displays the name of the track being played.
3. MP3 file information.
ROOT
001
002
003
SONGO1
SONGO2
SONGO3
►
0:00:11
SONGO1
3.5MB
2004/08/26
4. Shows the operating state of a disc and the current playback time.
5. Displays the information for the folder and its tracks.
6. Button display.
ꢇ
ꢆ
004
005
006
SONGO4
SONGO5
SONGO6
MP3
PLAY MODE
MOVE
ENTER
EXIT
RETURN
▌Playing Repeatedly
Music List
01/15
CD
1. Press the ANYKEY button during playback. The play mode window
appears.
TRACK 1
No.
001
Title
Length
TRACK
1
00:03:50
0:04:00
2. Select the desired repeat mode using ◄ ► buttons, and then press the
PLAY MODE
ENTER button.
Repeat : Off
ꢀ
ꢁ
0:03:49
0:03:47
0:04:29
00:03:44
00:03:44
►
0:0
TRAPlay option : Normal
ꢀ
ꢁ
•
•
•
Track : Selected track is played repeatedly.
Disc : Inserted disc is played repeatedly.
Folder(mp3 only) : Tracks in the current folder are played
repeatedly.
006
007
TRACK
TRACK
CDDA
6
7
PLAY MODE
MOVE
ENTER
EXIT
RETURN
To return to normal playback
3. Select Off in play mode window using ◄ ► buttons, and then press
the ENTER button.
English - 56
Download from Www.Somanuals.com. All Manuals Search And Download.
Play Option Mode
Music List
01/15
CD
TRACK 1
1. During Stop, Press the ANYKEY button. The Play option will be
highlighted.
• During Playback, Repeat Mode will be highlighted.
No.
001
Title
Length
TRACK
1
00:03:50
04:00
03:49
PLAY MODE
Repeat : Off
ꢀ
ꢁ
►
0:00
2. Select a desired play option (Normal, Random, Intro or Playlist) using
the ◄ ► buttons. Press the ENTER button.
• Normal : Tracks on a disc are played in the order in which they were
recorded on the disc.
Play option : Normalꢀ
03:47
04:29
00:03:44
00:03:44
ꢁ
TRAC
006
007
TRACK
TRACK
6
7
CDDA
PLAY MODE
MOVE
ENTER
EXIT
RETURN
• Random[R] : The Random option plays the disc’s tracks in random
order. After a random list is generated and played completely, another
random list is generated and played. Random Play is continued until
the play option is changed.
• Intro[ I ] : The first 10 seconds of each track will be played. If you
want to listen to the music that you have selected, press the ENTER
button or PLAY(
) button. The play option will be changed to
Normal Play. When Intro Play is completed, Normal Play is performed.
• Playlist : The Playlist playback option allows you to select the order
in which you want tracks to play.
To Program Tracks
Music List
01/15
CD
TRACK 1
You can register a maximum of 30 tracks in the playlist.
No.
001
Title
Length
00:03:50
00:04:00
00:03:49
TRACK
1
PLAY MODE
1. Press the ANYKEY button during playback, then select Play option
using ▲▼ buttons.
Repeat : Off
ꢀꢁ
0
00:03:47
00:04:29
00:03:44
00:03:44
Play option : Normal ꢀ
ꢁ
TR
006
007
6
7
2. Select Playlist using the ◄ ► buttons, and then press the ENTER
button.
CDDA
TRACK
TRACK
The Playlist screen will appear.
PLAY MODE
MOVE
ENTER
EXIT
RETURN
Select tracks in the order in which you want them to play using the ▲▼
buttons.
Press the ENTER button.
Playlist
07/15
CD
If there is a track on your playlist you wish to remove. Press the ►
button, then press the ▲▼ buttons to select the track you wish to
remove, then press the CANCEL button. The selected track will be
removed.
CDDA
TRACK 1
TRACK 2
TRACK 3
TRACK 4
TRACK 5
TRACK 6
TRACK 7
TRACK 8
001 TRACK 1
002 TRACK 3
003 TRACK 4
004 TRACK 7
CDDA
CDDA
CDDA
CDDA
CDDA
CDDA
CDDA
3. Press the PLAY( ) button to playback the playlist.
PLAY MODE
MOVE
ENTER
EXIT
Playing a Picture CD
JPEG
JPEG01
Photo List
1/08
1. Insert an JPEG disc into the disc tray.
2. Press the ▲▼ buttons to select Disc Navigation, and then press the
ENTER or ► button.
ROOT
JPEG01
JPEG02
JPEG06
JPEG03
JPEG07
3. Press the ▲▼ buttons to select Photo, and then press the ENTER or
► button.
JPEG04
JPEG05
MOVE
4. Press the ▲▼◄ ► buttons to select a picture.
• To see the next 8 pictures, press the SKIP(
• To see the previous 8 pictures, press the SKIP(
Slide Show
ENTER
RETURN
EXIT
) button.
)button.
English - 57
Download from Www.Somanuals.com. All Manuals Search And Download.
5-1. If you press the PLAY(
) button, the Slide show screen will appear.
The picture interval (Slide show speed) must be set.
DVD-RW(VR)
5-2. Press the ENTER button with a picture selected in the Album screen
and select a display mode (Album screen (
Rotation ( ) or Zoom ( )) using the ◄► buttons, then press
), Slide show (
),
Slide Show Speed
Slow Normal Fast
the ENTER button.
: Returns to the Album screen.
JPEG01
MOVE
: The unit enters slide show mode.
PHOTO
ENTER
RETURN
Before the slide show can begin, the picture interval (Slide show
speed) must be set.
DVD-RW(VR)
: Each time the ENTER button is pressed, the picture rotates 90
degrees clockwise.
:
Each time the ENTER button is pressed, the picture is enlarged up to 4X.
→
→
→
→
(Normal
2X
4X
2X
Normal)
• Press the ANYKEY button to display or clear menus.
JPEG01
MOVE
PHOTO
ENTER
RETURN
Playing an MPEG4 Disc
DivX
CD
ROOT
00/02
Size
No.
Title
ROOT
DIVX01
DIVX02
An MPEG4 File is used to contain audio and video data.
An MPEG4 File with following extensions can be played.
- .AVI, .DIVX, .avi, .divx
001
002
70.8MB
73.6MB
MPEG4
ROOT
MOVE
1. Insert a MPEG4 Disc into the disc tray.
2. Press the ▲▼ buttons to select the Disc Navigation, and then press
ENTER
RETURN
EXIT
the ENTER or ► button.
3. Press the ▲▼ buttons to select the DivX, and then press the ENTER
or ► button.
4. Press the ▲▼ buttons to select the avi file (DivX), then press the
ENTER, ► or PLAY button.
5. When an MPEG4 file is being played, you can use following functions.
Pressing the STOP button once during playback will display the file list,
pressing the button again will exit the menu screen.
MPEG4 Function Description
ꢀ
Function
Description
During playback, press the SKIP (
it moves forward or backward 5 minutes.
or
) button,
or
Skip Scene
During playback, press the SEARCH (
)
Search Scene
button and press again to search at a faster speed.
(2X, 4X, 8X)
In pause or step mode, press the SEARCH (
button on the remote control. (1/8X, 1/4X, 1/2X)
)
Slow Motion
Step Motion
Press the STEP(
) button on the remote control
in still mode.
■
This DVD Recorder can play the following video compression formats,
-MPEG4 Codec format :DivX 3.11 DivX 4.x DivX 5.x
-Audio format :.MP3,.MPEG,.PCM,.AC3,.DTS
■
■
Supported subtitle file formats:.smi,.srt,.sub,.psb, .txt (The subtitle file
should have exactly the same name to corresponding MPEG4 file name)
Some MPEG4 files created on a personal computer may not be
able to be played back.
This is why Codec Type,Version and Higher resolution over
specification is not supported.
English - 58
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing the Title List
Follow these instructions to play back a scene from the Title List.
Title List
1/6
DVD-RW(VR)
APR/19/2007
1. Press the TITLE LIST button. The Title List screen is displayed.
Or use the MENU button.
• Press the MENU button.
• Press the ▲▼ buttons to select Title List, and then press the
ENTER or ► button twice.
No. Title
Length Edit
►
01 APR/19/2007 12:00 00:00:21
02 APR/19/2007 12:30 00:00:03
03 APR/20/2007 12:00 00:00:15
04 APR/20/2007 12:30 00:00:16
05 APR/21/2007 12:00 00:06:32
06 APR/21/2007 12:30 00:08:16
►
►
►
►
►
APR/19/2007 12:00 AM AV1
APR/19/2007
SP
2. Press the ▲▼ buttons to select Title.
• Press the PLAY button. The selected entry (title) will be played back.
MOVE
ENTER
RETURN
EXIT
•
Press the ENTER or ► button. The Edit menu is displayed on the right.
(Rename, Delete, Edit, Protection : See pages 60~64)
ꢃ ꢄ ꢉꢈ ꢇ
3. To stop playing the title, press the STOP( ) button.
To return to the title list screen, press the TITLE LIST button.
DVD-RW(VR)
APR/21/2007
Title List
5/6
Length Edit
►
No. Title
Title List Screen Elements
01 APR/19/2007 12:00 00:00:21
02 APR/19/2007 12:30 00:00:03
03 APR/20/2007 12:00 00:00:15
►
►
►
►
►
04 APR/20/2007 12:30 00:00:16
ꢃPlayback screen for recorded entries
APR/21/2007 12:00 AM AV1
05 APR/21/2007 12:00 00:06:32
06 APR/21/2007 12:30 00:08:16
APR/21/2007
SP
ꢄInformation window for the selected entry : Title name, recording date,
lock status, record mode
MOVE
ENTER
RETURN
EXIT
ꢉRecorded entry No.
ꢂ
ꢈRecorded entry title
DVD-RW(VR)
APR/21/2007
Title List
5/6
ꢇRecording length (i.e., the playing time)
ꢆTitle list edit items
No. Title
Length Edit
►
01 APR/19/2007 12:00 00:00:21
02 APR/19/2007 12:30 00:00:03
Play : Plays the selected entry.
►
Play
Rename : Renames the title of a selected entry.
Delete : Deletes the selected entry from the list.
Edit : Deletes a section.
03 APR/20/2007 12
Rename
04 APR/20/2007 12
APR/21/2007 12:00 AV1
APR/21/2007
SP
Delete
05 APR/21/2007 12
ꢆ
Edit
06 APR/21/2007 12
Protection
Protection : Locks or unlocks the selected entry.
MOVE
ENTER
RETURN
EXIT
ꢂButton display
■
■
■
By pressing the ANYKEY button, you can play the desired title.
This may depend on the the disc type.
DVD±R/DVD-RW(Video) has limited editing function.(See page 36)
English - 59
Download from Www.Somanuals.com. All Manuals Search And Download.
Editing
This section introduces basic functions of DVD editing.
• Title List
A title is a section of recorded video and audio.
The Title List shows a list to help you select a title.
If one title is deleted from the title list, that title cannot be played again.
• Playlist
This refers to a unit of playback, which is made by selecting a desired
scene in the entire Title List.
When one playlist is played, only the scene selected by the user will
play and then stop. Since only the information necessary for playing a
desired scene is included in a playlist, even if that playlist is deleted, the
original recorded title will not be deleted.
Recording or editing might not be completed if an error such as a
sudden power failure occurs.
Please be aware that material that has been damaged cannot be
retrieved.
Basic Editing (Title List)
▌Renaming (Labeling) a Title
DVD-Recorder
DVD-RW(VR)
Rename
Sports(A1)
Follow these instructions to rename a title list entry, i.e., to edit the
title of a recorded program.
Save
Space
1. Press the TITLE LIST button. The Title List screen is displayed.
Or use the MENU button.
Back Space
Delete
Clear
MOVE
ENTER
RETURN
EXIT
• Press the MENU button.
• Press the ▲▼ buttons to select Title List, and then press the ENTER
or ► button twice.
Title List
5/6
DVD-RW(VR)
Sports(A1)
2. Press the ▲▼ buttons to select an entry you want to rename from the
No.
Title
Length Edit
►
Title List, and then press the ENTER or ► button.
01 APR/19/2007 12:00 00:00:21
02 APR/19/2007 12:30 00:00:03
03 APR/20/2007 12:00 00:00:15
04 APR/20/2007 12:30 00:00:16
►
►
►
►
►
3. Press the ▲▼ buttons to select Rename, and then press the ENTER
or ► button.
The Rename screen is displayed.
Sports(A1)
APR/03/2007
SP
05
Sports(A1)
00:06:32
06 APR/21/2007 12:30 00:08:16
4. Select the desired characters using the ▲▼◄ ► buttons, press the
ENTER button.
MOVE
ENTER
RETURN
EXIT
• Back Space : Deletes the character before the cursor.
• Space : Enters a blank and moves the cursor one forward (to the
right).
• Delete : Deletes the character at the cursor position.
• Clear : Deletes all the character inputs.
• Save : Registers the character inputs.
• The maximum number of characters that can be entered is 31. All 31
characters can be displayed by pressing the INFO button twice.
5. Press the ▲▼◄ ► buttons to select Save, and then press the ENTER
button.
The changed title name is displayed on the title item of the selected
Title list entry.
English - 60
Download from Www.Somanuals.com. All Manuals Search And Download.
▌Locking (Protecting) a Title
DVD-RW(VR)
Sports(A1)
Title List
5/6
Title Protection:
Follow these instructions to lock an entry to protect it from
accidental deletion.
Sports(A1)
APR/21/2007
SP
On
Off
1. Press the TITLE LIST button. The Title List screen is displayed.
Or use the MENU button.
• Press the MENU button.
MOVE
ENTER
RETURN
EXIT
• Press the ▲▼ buttons to select Title List, and then press the ENTER
or ► button twice.
DVD-RW(VR)
Sports(A1)
Title List
5/6
2. Press the ▲▼ buttons to select an entry you want to protect from the
Title List, and then press the ENTER or ► button.
No.
01
Title
Drama
Music
Length Edit
►
00:00:21
►
02
00:00:03
3. Press the ▲▼ buttons to select Protection, and then press the
ENTER or ► button.
►
03
04
Sports
Movie
00:00:15
►
00:00:16
Sports(A1)
APR/21/2007
SP
►
05 Sports(A1)
00:06:32
►
06
Edu
1
00:08:16
4. Press the ◄ ► buttons to select On, and then press the ENTER
button. The lock icon on the information window for the selected entry
MOVE
ENTER
RETURN
EXIT
changes to the locked status. (
)
ꢁ
If you want to unlock the title entry, select the protected title and set the
Protection function to Off.
▌Deleting a Title
DVD-RW(VR)
Sports(A1)
Title List
5/6
Follow these instructions to delete an entry from the Title List.
1. Press the TITLE LIST button. The Title List screen is displayed.
Or use the MENU button.
• Press the MENU button.
• Press the ▲▼ buttons to select Title List, and then press the ENTER
or ► button twice.
No.
01
Title
Drama
Music
Length Edit
►
00:00:21
00:0
Play
02
00:0
03
04
Sports
Movie
Rename
00:0
Sports(A1)
APR/21/2007
SP
Delete
05 Sports(A1)
00:0
Edit
06
Edu
1
00:0
Protection
2. Press the ▲▼ buttons to select an entry you want to delete from the
Title List, and then press the ENTER or ► button.
MOVE
ENTER
RETURN
EXIT
3. Press the ▲▼ buttons to select Delete, and then press the ENTER or
► button.
You will be prompted with the confirmation message.
DVD-RAM, DVD-RW(VR mode): Since Playlist is present, the message
“Do you want to delete?(Related playlists may be deleted.)”
is displayed.
DVD-RW(VR)
Sports(A1)
Title List
5/6
Do you want to delete?
(Related playlists
may be deleted.)
Sports(A1)
APR/21/2007
SP
DVD-RW(Video mode), DVD+RW, DVD±R: Since Playlist is not
present, the message “Do you want to delete?” is displayed.
• The message may be different depending on the type of disc.
Yes
No
MOVE
ENTER
RETURN
EXIT
4. Press the ◄ ► buttons to select Yes, and then press the ENTER button.
■
■
You cannot delete a protected entry. If you want to delete a
protected entry, select “Off” in the Title Protection menu.
Once an entry is deleted from the Title List, it cannot be
recovered.
■
■
Once a DVD±R or DVD-RW is finalized, it cannot be deleted.
With DVD±R, titles are only deleted from the menu, however, the
Title remains physically on the disc.
English - 61
Download from Www.Somanuals.com. All Manuals Search And Download.
▌Deleting a Section of a Title
(VR mode)
DVD-RW(VR)
Edit Title List
Follow these instructions to delete a section of a Title List entry.
Title List No. 05
Start
End
1. Press the TITLE LIST button. The Title List screen is displayed.
Or use the MENU button.
• Press the MENU button.
• Press the ▲▼ buttons to select Title List, and then press the ENTER
or ► button twice.
00:00:05
00:00:00
00:00:05
►
Start
End
Delete
Return
EXIT
MOVE
ENTER
RETURN
2. Press the ▲▼ buttons to select an entry you want to edit from the Title
List, and then press the ENTER or ► button.
DVD-RW(VR)
Edit Title List
3. Press the ▲▼ buttons to select Edit, and then press the ENTER or ►
button.
Title List No. 05
Start
End
4. Press the ENTER button at the starting point.
The image and starting point time are displayed on the section deletion
starting point window.
00:00:05
00:10:15
00:10:15
5. Press the ENTER button at the end point.
The image and end point time are displayed in the Section deletion
ending point window.
Start
End
Delete
Return
EXIT
MOVE
ENTER
RETURN
6. Press the ◄ ► buttons to select Delete, and then press the ENTER
DVD-RW(VR)
Edit Title List
button.
Title List No. 05
The message “Do you want to delete?(Deleted part will not be
restored)” is displayed.
d
Do you want to delete?
(Deleted part will not be restored.)
7. Press ◄ ► buttons to select Yes, and then press the ENTER button.
The selected section is deleted.
:20
:20
Yes
No
Start
End
Delete
Return
EXIT
To return to the Title List screen, press the ◄ ► buttons to select
Return.
MOVE
ENTER
RETURN
ꢃ
ꢉ ꢈ
Edit Title List Screen Elements
1 Playback bar
ꢀ
DVD-RW(VR)
Edit Title List
2 Title List No.
Title List No. 05
ꢄ
Start
End
3 Section deletion starting point window and time
4 Section deletion end point window and time
• Select the start and end points of the section you want to delete
using the playback related buttons.
00:00:05
00:00:00
00:00:05
►
Start
End
Delete
Return
EXIT
• Playback related buttons (
,
,
,
,
,
).
MOVE
ENTER
RETURN
■
■
■
The length of the section to be deleted must be at least 5 seconds
long.
If the length of the section to be deleted is less than 5 seconds,
you will be prompted with the message "The range is too short."
If the end time precedes the starting point, you will be prompted
with the message "End point cannot be marked earlier than start
point".
■
The section cannot be deleted when it includes a still picture.
English - 62
Download from Www.Somanuals.com. All Manuals Search And Download.
▌Editing a Chapter
Chapter Edit
DVD+RW
DVD+RWs don't support the Auto Chapter Creator function. You
can make your own chapters on DVD+RWs and edit them using the
Chapter Edit menu.
Chapter : 1/1 Show
►
00:00:00
Add
Delete
Hidden
Delete All
Return
EXIT
1. Press the TITLE LIST button. The Title List screen is displayed.
Or use the MENU button.
MOVE
ENTER
RETURN
• Press the MENU button.
• Press the ▲▼ buttons to select Title List, and then press the ENTER
or ► button twice.
ꢃ
ꢄ
Chapter Edit
DVD+RW
2. Press the ▲▼ buttons to select a title containing a chapter you want to
edit, then press the ENTER or ► button.
3. Press the ▲▼ buttons to select Chapter Edit, then press the ENTER
or ► button.
The Chapter Edit screen is displayed.
Chapter : 1/1 Show
►
00:00:00
ꢉ
ꢈ
Add
MOVE
Delete
Hidden
Delete All
Return
EXIT
Chapter Edit Screen Elements
1. Current chapter number and status
2. Playback bar
ꢀ
ENTER
RETURN
3. Playtime
4. Chapter Edit menu
Adding a chapter
Chapter Edit
DVD+RW
4. Select the point where you want to add a chapter using the playback
related buttons, then press the ENTER button at that point.
Each time you press the ENTER button, a new chapter will be added.
• Playback related buttons: (
,
,
,
,
).
Chapter : 1/2 Show
5. Press the ◄ ► buttons to select Return, and then press the ENTER
button.
The edited title will now have the chapter you added.
►
00:10:10
Add
Delete
Hidden
Delete All
Return
EXIT
MOVE
ENTER
RETURN
■
■
■
You can make up to 99 chapters in a title and 254 chapters in a
disc.
The edited chapters are shown on existing DVD players only after
performing the Edit Compatible function. (See page 72)
If you add a chapter, the title is divided at that point; If you add a
chapter onto a title that has only one chapter, it creates another
chapter.
Chapter Edit
DVD+RW
Deleting a chapter
4. Select a chapter you want to delete using the playback related buttons.
• Playback related buttons: (
,
,
,
,
,
).
Chapter : 2/3 Show
►
00:15:00
5. Press the ◄ ► buttons to select Delete, and then press the ENTER
button.
The edited title has chapters as you deleted.
Add
Delete
Hidden
Delete All
Return
EXIT
MOVE
ENTER
RETURN
■
■
First chapter can't be deleted.
Delete menu is not available if there is one chapter in the selected
tilte.
■
■
When deleting a chapter, only the chapter marker is actually
deleted, not the recorded video.
Deleting a chapter can't be canceled.
English - 63
Download from Www.Somanuals.com. All Manuals Search And Download.
Hiding a chapter
Chapter Edit
DVD+RW
Follow steps 1 to 3 on page 63
4. Select a chapter you want to hide using the playback related buttons.
• Playback related buttons: (
,
,
,
,
,
).
5. Press the ◄ ► buttons to select Hidden, and then press the ENTER
button.
Chapter : 2/4 Hidden
►
00:15:00
The selected chapter is hidden.
• To finish the operation, select Return using the ◄ ► buttons then
press the ENTER button.
Add
Delete
Hidden
Delete All
Return
EXIT
MOVE
ENTER
RETURN
■
■
If there is only one chapter, it can’t be hidden.
Hidden/Show menu is not avaiable if there is no chapter in the
selected title.
■
■
The hidden chapters can not be seen on other DVD players.
Hidden menu is changed to Show menu with a chapter playing
back. You can make the hidden chapter shown by pressing the
ENTER button at the Show menu.
Deleting all chapters
Chapter Edit
DVD+RW
Follow steps 1 to 3 on page 63
4. Press the ◄ ► buttons to select Delete All, and then press the ENTER
button.
Do you want to delete all chapter marks?
5. Press the ◄ ► buttons to select Yes, and then press the ENTER
button.
Yes
Delete
No
►
0:00
Return
Add
MOVE
Hidden
Delete All
ENTER
RETURN
EXIT
■
■
When deleting a chapter, only the chapter marker is actually
deleted, not the recorded video.
Delete All menu is not avaiable if there is one chapter in the
selected title.
Divide Title
DVD+RW
▌Dividing a Title
Title List No. 03
Start
End
00:00:00
00:00:00
00:00:00
Follow these instructions to divide a long title into several titles.
►
1. Press the TITLE LIST button. The Title List screen is displayed.
Or use the MENU button.
Point
Divide
Return
MOVE
ENTER
RETURN
EXIT
• Press the MENU button.
• Press the ▲▼ buttons to select Title List, and then press the ENTER
or ► button twice.
Divide Title
DVD+RW
Title List No. 03
2. Press the ▲▼ buttons to select a title you want to divide from the Title
Start
End
List, then press the ENTER or ► button.
3. Press the ▲▼ buttons to select Divide Title, then press the ENTER or
► button.
00:00:00
00:19:25
00:19:25
►
Point
Divide
Return
EXIT
The Divide Title screen is displayed.
MOVE
ENTER
RETURN
4. Select the point you want to divide using the playback related buttons,
then press the ENTER button.
Divide Title
• Playback related buttons: (
,
,
,
,
,
).
DVD+RW
5. Press the ◄► buttons to select Divide, then press the ENTER button.
Title List No. 03
6. Press the ◄► buttons to select Yes, then press the ENTER button.
The selected title has been divided into two titles.
Do you want to divide the title?
(Once divided, titles cannot be merged back.)
00
Yes
No
:25
Return
Point
Divide
■
If the section to be divided is less than 5 seconds, you will be
prompted with the message "The range is too short.".
MOVE
ENTER
RETURN
EXIT
English - 64
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced Editing (Playlist)
Make Scene
DVD-Recorder
DVD-RW(VR)
▌Creating a Playlist
Scene No. 001
Start
End
Title List : 1/6
00:00:10
00:00:00
00:00:10
(VR mode)
►
Follow these instructions to create a new playlist entry from a
recorded title.
Start
End
Make
Return
EXIT
MOVE
ENTER
RETURN
1. With the unit in Stop mode, press the MENU button on the remote control.
2. Press the ▲▼ buttons to select Playlist, and then press the ENTER or
► button.
Make Scene
DVD-Recorder
DVD-RW(VR)
3. Press the ▲▼ buttons to select New Playlist, and then press the
ENTER or ► button.
Scene No. 001
Start
End
The Make Scene screen is displayed.
Title List : 1/6
II
00:00:10
00:10:00
00:10:00
4. Press the ENTER button at the start point.
• The image and starting point time are displayed on the Start window.
• The yellow-colored selection bar moves to the End item.
• Select the starting point of the section from which you want to create
a new scene using the playback related buttons
Start
End
Make
ENTER
Return
EXIT
MOVE
RETURN
(
,
,
,
,
,
,
).
Edit Playlist
1/5
DVD-RW(VR)
APR/23/2007
5. Press the ENTER button at the end point.
• The image and end point time are displayed on the End window.
• The yellow-colored selection bar moves to the Make item.
No.
Title
Length Edit
►
01 APR/23/2007 12:00 00:00:21
02 APR/23/2007 12:30 00:00:03
03 APR/24/2007 12:00 00:00:15
04 APR/24/2007 12:30 00:00:16
05 APR/25/2007 12:00 00:06:32
►
►
►
►
- To make a new playlist -
APR/23/2007 12:00 AM
Scene
APR/23/2007 12:00 AM
1
6. Press the ◄ ► buttons to select Make, and then press the ENTER button.
A new Scene will be added to the current Playlist.
A new Make Scene screen is displayed.
MOVE
ENTER
RETURN
EXIT
Repeat the above steps 4~6 to create further scenes.
■
■
If you want to make a new playlist, go to MENU
new playlist.
ꢁ
You can check and see all the scenes on the Edit Playlist screen.
- To return to the Edit Playlist menu -
7. Press the ◄ ► buttons to select Return, and then press the ENTER button.
The Edit Playlist screen is displayed.
■
■
You can create up to 99 playlist entries.
Depending on the disc type, the displayed screen may look
slightly different.
■
A disc that is recorded on this unit cannot be displayed playlist
menu if EZ REC MODE set to 'On'.
▌Playing Entries in the Playlist
Edit Playlist
3/5
DVD-RW(VR)
APR/24/2007
(VR mode)
No.
Title
Length Edit
►
01 APR/23/2007 12:00 00:00:21
Follow these instructions to play the playlist entries.
02 APR/23/2007 12:3
Play
03 APR/24/2007 12:0
Rename
1. With the unit in stop mode, press the PLAYLIST button.
The Edit Playlist screen is displayed.
04 APR/24/2007 12:3
Edit Scene
APR/24/2007 12:00 AM
05 APR/25/2007 12:0
Copy
1
Scene
Delete
APR/24/2007 12:00 AM
2. Press the ▲▼ buttons to select the title you want to edit from the
Playlist, and then press the ENTER or button.
►
MOVE
ENTER
RETURN
EXIT
3. Press the ▲▼ buttons to select Play, and then select the ENTER button.
The playlist entries will be played.
4. Press the STOP(
) button to stop playing.
The screen returns to the Edit Playlist screen.
English - 65
Download from Www.Somanuals.com. All Manuals Search And Download.
▌Renaming a Playlist Entry
Rename
DVD-Recorder
DVD-RW(VR)
Dolphin
(VR mode)
Follow these instructions to rename a playlist entry, i.e. to edit the
title of a playlist entry.
Save
Space
Back Space
Delete
Clear
1. With the unit in stop mode, press the PLAY LIST button.
MOVE
ENTER
RETURN
EXIT
The Edit Playlist screen is displayed.
2. Press the ▲▼ buttons to select the title you want to edit from the
Playlist, and then press the ENTER or ► button.
Edit Playlist
DVD-RW(VR)
Dolphin
3. Press the ▲▼ buttons to select Rename, and then press the ENTER
No.
Title
Length Edit
►
01 APR/23/2007 12:00 00:00:21
02 APR/23/2007 12:30 00:00:03
button.
►
►
►
►
03 Dolphin
00:00:15
4. Enter the desired characters using the ▲▼◄ ► buttons.
• Back Space: Deletes the character before the cursor.
• Space: Enters a blank and moves the cursor one forward (to the right).
• Delete: Deletes the character at the cursor position.
• Clear: Deletes all the character inputs.
04 APR/24/2007 12:30 00:00:16
05 APR/25/2007 12:00 00:00:32
Dolphin
1
Scene
APR/24/2007 12:00 AM
MOVE
ENTER
RETURN
EXIT
• Save: Registers the character inputs.
• The maximum number of characters that can be entered is 31. All 31
characters can be displayed by pressing the INFO button twice.
5. Press the ▲▼◄ ► buttons to select Save, and then press the ENTER
button.
The changed title name is displayed on the title item of the selected
playlist entry.
▌Editing a Scene for the Playlist
DVD-Recorder
DVD-RW(VR)
Edit Scene
Scene No.
1 / 7
Playlist No.
3
Play
Modify
Move
Add
(VR mode)
Follow these instructions to edit scenes for a playlist
01 00:00:26
02 00:00:07
03 00:00:04
1. With the unit in stop mode, press the PLAY LIST button.
The Edit Playlist screen is displayed.
Delete
04 00:00:03
MOVE
05 00:00:11
ENTER
06 00:00:04
RETURN
2. Press the ▲▼ buttons to select the title you want to edit from the
EXIT
Playlist, and then press the ENTER or ► button.
3. Press the ▲▼ buttons to select Edit Scene, and then press the
ENTER button.
The Edit Scene screen is displayed.
Playing a Selected Scene
DVD-Recorder
Edit Scene
DVD-RW(VR)
Scene No. 2 / 7
4. Press the ▲▼◄ ► buttons to select the scene you want to play, and
then press the ENTER button.
Playlist No. 3
Play
The playlist entry to be played is selected.
Modify
Move
Add
01 00:00:26
02 00:00:07
03 00:00:04
5. Press the ENTER button.
The selected scene is played.
• To stop scene play, press the STOP( ) button.
Delete
▼
04 00:00:03
MOVE
05 00:00:11
ENTER
06 00:00:04
RETURN
EXIT
English - 66
Download from Www.Somanuals.com. All Manuals Search And Download.
Modifying a Scene (Replacing a Scene)
Follow steps 1 to 3 of Editing a Scene for the Playlist on page 66.
DVD-Recorder
DVD-RW(VR)
Edit Scene
4. Press the ▲▼◄ ► buttons to select the scene you want to modify,
Scene No.
2 / 7
Playlist No.
3
and then press the ENTER button.
Play
Modify
Move
Add
5. Press the ▲▼ buttons to select Modify, and then press the ENTER
button.
01 00:00:26
02 00:00:07
03 00:00:04
6. Press the ENTER button at the start point of the scene.
• The image and starting point time are displayed on the Start window.
• Select the starting or ending point of the section you want to modify
Delete
04 00:00:03
MOVE
05 00:00:11
ENTER
06 00:00:04
RETURN
EXIT
using the playback related buttons (
,
,
,
,
,
,
).
Modify Scene
DVD-Recorder
DVD-RW(VR)
7. Press the ENTER button at the end point of the scene.
• The image and ending point time are displayed on the End window.
Scene No. 002
Start
End
8. Press the ◄ ► buttons to select Change, and then press the ENTER
button.
• The scene you want to modify is changed with the selected section.
Title List : 5/6
End
00:00:25
00:00:00
00:00:25
►
Start
Change
Cancel
EXIT
MOVE
ENTER
RETURN
Modify Scene
DVD-Recorder
DVD-RW(VR)
Scene No. 002
Start
End
Title List : 5/6
End
00:00:25
00:00:30
00:00:30
II
Start
Change
Cancel
MOVE
ENTER
RETURN
EXIT
DVD-Recorder
DVD-RW(VR)
Edit Scene
Scene No.
2 / 7
Playlist No.
3
Play
Modify
Move
Add
01 00:00:26
02 00:00:07
03 00:00:04
Delete
04 00:00:03
MOVE
05 00:00:11
ENTER
06 00:00:04
RETURN
EXIT
DVD-Recorder
DVD-RW(VR)
Edit Scene
Moving a Scene (Changing the Position of a Scene)
Scene No.
3/7
Playlist No.
3
Follow steps 1 to 3 of Editing a Scene for the Playlist on page 66.
Play
Modify
Move
Add
4. Press the ▲▼◄ ► buttons to select the scene you want to move
(change the position), and then press the ENTER button.
01 00:00:26
02 00:00:07
03 00:00:04
5. Press the ▲▼ buttons to select Move, then press the ENTER button.
• A yellow selection window is displayed on the scene to be moved.
Delete
04 00:00:03
MOVE
05 00:00:11
ENTER
06 00:00:04
RETURN
EXIT
6. Press the ▲▼◄ ► buttons to select the position to which you want to
move the selected scene, and then select the ENTER button.
• The selected scene is moved to the selected position.
Edit Scene
DVD-Recorder
DVD-RW(VR)
Scene No.
5/7
Playlist No.
3
Play
Modify
Move
Add
■
Depending on the disc type, the displayed screen may look
slightly different.
01 00:00:26
02 00:00:04
03 00:00:03
Delete
04 00:00:11
MOVE
05 00:00:04
ENTER
06 00:00:04
RETURN
EXIT
English - 67
Download from Www.Somanuals.com. All Manuals Search And Download.
Adding a Scene
DVD-Recorder
DVD-RW(VR)
Edit Scene
Follow steps 1 to 3 of Editing a Scene for the Playlist on page 66.
Scene No.
4/7
Playlist No.
3
4. Press the ▲▼◄ ► buttons to select the scene that will have a new
scene inserted before it, and then press the ENTER button.
A yellow selection window is displayed on the scene to be added as the
new scene.
Play
Modify
Move
Add
01 00:00:26
02 00:00:07
03 00:00:04
5. Press the ▲▼ buttons to select Add, then press the ENTER button.
Delete
04 00:00:03
MOVE
05 00:00:11
ENTER
06 00:00:04
RETURN
6. Press the ENTER button at the starting point of the scene.
EXIT
• The image and starting point time are displayed on the Start window.
•
Select the end point of the section where you want to add the new scene
using the playback related buttons ).
7. Press the ENTER button at the end point of the scene.
• The image and end point time are displayed in the End window.
Add Scene
DVD-Recorder
DVD-RW(VR)
(
,
,
,
,
,
,
Scene No. 004
Start
End
• To cancel, press the ◄►buttons to select Cancel and then press the
ENTER button.
Title List : 4/6
End
00:00:15
00:00:00
00:00:15
►
8. Press the ◄ ► buttons to select Add, and then press the ENTER
button.
Start
Add
ENTER
Cancel
EXIT
MOVE
RETURN
• The section you want to add is inserted prior to the scene selected in
step 4.
Add Scene
DVD-Recorder
DVD-RW(VR)
Scene No. 004
Start
End
Title List : 4/6
II
00:00:15
00:00:35
00:00:35
Start
End
Add
Cancel
MOVE
ENTER
RETURN
EXIT
Edit Scene
DVD-Recorder
DVD-RW(VR)
Scene No.
4/8
Playlist No.
3
Play
Modify
Move
Add
01 00:00:26
02 00:00:07
03 00:00:04
Delete
04 00:00:20
MOVE
05 00:00:03
ENTER
06 00:00:11
RETURN
EXIT
Deleting a Scene
Edit Scene
DVD-Recorder
DVD-RW(VR)
Follow steps 1 to 3 of Editing a Scene for the Playlist on page 66.
Scene No.
2/7
Playlist No.
3
4. Press the ▲▼◄ ► buttons to select the scene you want to delete, and
then press the ENTER button.
Play
Modify
Move
Add
01 00:00:26
02 00:00:07
03 00:00:04
5. Press the ▲▼ buttons to select Delete, and then press the ENTER
button.
Delete
04 00:00:03
MOVE
05 00:00:11
ENTER
06 00:00:04
RETURN
EXIT
Edit Scene
DVD-Recorder
DVD-RW(VR)
Scene No.
2/6
Playlist No.
3
Play
Modify
Move
Add
01 00:00:26
03 00:00:04
04 00:00:03
Delete
05 00:00:11
MOVE
06 00:00:04
ENTER
06 00:00:05
RETURN
EXIT
English - 68
Download from Www.Somanuals.com. All Manuals Search And Download.
▌
Copying a Playlist Entry to the Playlist
Edit Playlist
DVD-RW(VR)
Dolphin
1. Press the PLAY LIST button.
3/4
No.
01
Title
Length Edit
The Edit Playlist screen is displayed.
Science
Play
2. Press the ▲▼ buttons to select the title you want to copy to the
Playlist, and then press the ENTER or ► button.
02
03
04
Sky
Ren
Edi
a
m
e
Dolphin
Natural
t S
c
e
n
e
Copy
Delete
Dolphin
7 Scene
APR/23/2007 06:43 AM
3. Press the ▲▼ buttons to select Copy, and then press the ENTER
button.
Playlist that has been selected will be copied.
MOVE
ENTER
RETURN
EXIT
Edit Playlist
5/5
DVD-RW(VR)
Dolphin
■
The playlist can contain up to 99 playlist entries (titles).
No.
Title
Length Edit
►
01 Science
02 Sky
00:00:17
►
00:00:06
►
03 Dolphin
04 Natural
05 Dolphin
00:00:06
►
00:00:37
Dolphin
7 Scene
APR/23/2007 06:43 AM
►
00:00:06
MOVE
ENTER
RETURN
EXIT
▌Deleting a Playlist Entry from the Playlist
1. With the unit in Stop mode, press the PLAY LIST button.
The Edit Playlist screen is displayed.
DVD-RW(VR)
Dolphin
Edit Playlist
5/5
2. Press the ▲▼ buttons to select the title you want to edit from the
Playlist, and then press the ENTER or ► button.
Do you want to delete?
3. Press the ▲▼ buttons to select Delete, and then press the ENTER button.
Dolphin
7 Scene
APR/23/2007 06:43 AM
Yes
No
4. Press the ◄ ► buttons to select Yes, and then press the ENTER button.
You automatically returned to the Edit Playlist screen after the deletion
operation has finished.
MOVE
ENTER
RETURN
EXIT
Disc Manager
▌Editing the Disc Name
Rename
DVD-Recorder
DVD-RW(VR)
Disc
Follow these instructions to give a name to a disc.
1. With the unit in Stop mode, press the MENU button on the remote control.
Save
Space
2. Press the ▲▼ buttons to select Disc Manager, then press the ENTER
or ► button.
Back Space
Delete
Clear
MOVE
ENTER
RETURN
EXIT
3. Press the ▲▼ buttons to select Disc Name, then press the ENTER or
► button.
The Rename screen is displayed.
Disc Manager
DVD-Recorder
DVD-RW(VR)
4. Enter the desired characters using the ▲▼◄ ► buttons.
• Back Space : Deletes the character before the cursor.
• Space : Enters a blank and moves the cursor one forward (to the right).
• Delete : Deletes the character at the cursor position.
• Clear : Deletes all the character inputs.
Title List
Playlist
►
►
Disc Name : Disc
Disc Protection : Not Protected
Disc Format : DVD-VR
Disc Finalize
►
►
►
Disc Manager
Timer Rec.
Delete All Title Lists
Setup
• Save : Registers the character inputs.
• The maximum number of characters that can be entered is 31. All 31
characters can be displayed by pressing the INFO button twice.
MOVE
ENTER
RETURN
EXIT
5. Press the ▲▼◄ ► buttons to select Save, and then press the ENTER button.
A disc name is given to the disc.
■
■
You may need to disable disc protection before beginning editing.
(see page 70.)
Depending on the kind of disc, the displayed screen may be different.
English - 69
Download from Www.Somanuals.com. All Manuals Search And Download.
▌Disc Protection
Disc Manager
DVD-Recorder
DVD-RW(VR)
Title List
►
Disc Name :
Disc Protection : Protected
Disc Manager Disc Format : DVD-VR
Playlist
►
►
►
►
Disc Protection allows you to protect your discs from being
formatted or deleted due to unintended operations
Disc Finalize
Timer Rec.
Setup
Delete All Title Lists
1. With the unit in Stop mode, press the MENU button on the remote control.
2. Press the ▲▼ buttons to select Disc Manager, and then press the
MOVE
ENTER
RETURN
EXIT
ENTER or ► button.
3. Press the ▲▼ buttons to select Disc Protection, then press the
ENTER or ► button.
4. Press the ▲▼ buttons to select Protected, then press the ENTER button
.
▌Formatting a Disc
Use these instructions to format a disc.
Disable disc protection before formatting.
1. With the unit in Stop mode, press the MENU button on the remote control.
2. Press the ▲▼ buttons to select Disc Manager, and then press the
ENTER or ► button.
3. Press the ▲▼ buttons to select Disc Format, and then press the
DVD-RAM/+RW
ENTER or ► button.
Disc Manager
DVD-Recorder
DVD-RAM(VR)
DVD-RAM/+RW
• You will be prompted with the confirmation message “Do you want to
format disc?”.
Title List
►
►
Disc Name
:
Playlis
►
►
►
Disc Mana
Timer R
• If you select Yes using the◄ ► buttons and press the ENTER button,
you will be prompted with the confirmation message “All data will be
deleted. Do you want to continue?”.
Do you want to format disc?
Yes
No
Setup
DVD-RW
MOVE
ENTER
RETURN
EXIT
• You will be prompted with the confirmation message “Choose the
recording format for DVD-RW”
DVD-RW
4. Press the ◄ ► buttons to select desired mode, then press the ENTER
button.
• You will be prompted again with the message “All data will be deleted.
Do you want to continue?”
Disc Manager
DVD-Recorder
DVD-RW(VR)
Title List
►
►
Disc Name :
Disc
Pla
►
►
►
Choose the recording format for DVD-RW
5. Press the ◄ ► buttons to select Yes, and then press the ENTER
button.
Tim
Set
DVD-VR DVD-V
The disc is formatted.
MOVE
ENTER
RETURN
EXIT
DVD-VR and DVD-V modes are compatible with the following disc
types.
Disc Manager
DVD-Recorder
DVD-RW(VR)
DVD-VR
DVD-RAM
DVD-RW
DVD-V
DVD-RW
DVD-R
Title List
►
►
Disc Name :
Pla
All data will be deleted.
DISC
►
►
►
Disc
Do you want to continue?
Tim
Yes
No
Set
■
Menu items may differ depending on the disc type.
MOVE
ENTER
RETURN
EXIT
English - 70
Download from Www.Somanuals.com. All Manuals Search And Download.
▌Finalizing a Disc
After you record titles onto a DVD-RW/DVD-R disc with your DVD
recorder, it needs to be finalized before it can be played back on
external devices.
1. With the unit in Stop mode, press the MENU button on the remote control.
2. Press the ▲▼ buttons to select Disc Manager, and then press the
ENTER or ► button.
3. Press the ▲▼buttons to select Disc Finalize, and then press the
ENTER or ► button.
You will be prompted with the message “Do you want to finalize disc?”.
4. Press the ◄ ► buttons to select Yes, then press the ENTER button.
You will be prompted again with the message “Disc will be finalized. Do
you want to continue?”.
5. Press the ◄ ► buttons to select Yes, and then press the ENTER button.
The disc is finalized.
■
■
Once a disc is finalized, you cannot delete entries from the record list.
Once a DVD±R/DVD-RW (video mode)disc is finalized, it is
playable in a standard DVD player.
■
■
■
■
Depending on disc type, the displayed screen may appear slightly
different.
Finalizing time may be different depending on the amount of data
recorded on the disc.
Data on the disc will be damaged if the recorder is powered off
during finalizing process.
You can finalize automatically using EZ REC MODE. (See page 46)
▌Unfinalizing a Disc (V/VR mode)
Disc Manager
DVD-Recorder
DVD-RW(VR:F)
Title List
►
►
►
Disc Name :
Disc Format : DVD-VR
1. With the unit in Stop mode, press the MENU button on the remote control.
Playlist
2. Press the ▲▼ buttons to select Disc Manager, and then press the
Disc Manager Disc Unfinalize
ENTER or ► button.
Timer Rec.
Setup
3. Press the ▲▼ button to select Disc Unfinalize, and then press the
ENTER or ► button.
MOVE
ENTER
RETURN
EXIT
You will be prompted with the message “Do you want to unfinalize disc?”.
4. Press the ◄ ► buttons to select Yes, then press the ENTER button.
You will be prompted again with the message “Disc will be unfinalized.
Do you want to continue?”.
5. Press the ◄ ► buttons to select Yes, and then press the ENTER
button.The disc is unfinalized.
■
A DVD-RW can be finalized or unfinalized in Video mode.
Finalize
DVD-Video(RW)
Unfinalize
DVD-RW(V)
Mark
Additional recording, protection
and deletion are possible.
Operation Same as DVD-Video
■
A DVD-RW can be finalized or unfinalized in VR mode.
Finalize
Unfinalize
Mark
DVD-RW(VR:F)
DVD-RW(VR)
Additional recording,
deletion, editing, and
protection are
Additional recording,
deletion, editing, and
protection are possible.
Operation
impossible.
English - 71
Download from Www.Somanuals.com. All Manuals Search And Download.
▌Delete All Title Lists
Disc Manager
DVD-Recorder
DVD-RW(VR)
Title List
►
►
Disc Name :
Disc
The disc protection should be disabled first.
Pla
►
►
►
Do you want to delete all title lists?
1. With the unit in Stop mode, press the MENU button on the remote
control.
Tim
Set
Yes
No
2. Press the ▲▼ buttons to select Disc Manager, and then press the
ENTER or ► button.
MOVE
ENTER
RETURN
EXIT
3. Press the ▲▼ buttons to select Delete All Title Lists, and then press
the ENTER or ► button.
• When Protected Entry exists: The Delete All Title List function will not
operate. If you want to delete a protected title, disable Protection for it
on the Lock item. (See page 61)
4. Press the ◄ ► buttons to select Yes, and then press the ENTER
button.
All title lists are deleted.
▌Edit Compatible
Disc Manager
DVD-Recorder
DVD+RW
Title List
►
►
Disc Name :
For DVD+RW discs, this function needs to be performed in order to
view edited chapters or titles on a standard DVD player.
Disc M
Do you want to execute Edit compatible?
This may take more than an hour
►
Time
depending on the configuration.
Setu
1. With the unit in Stop mode, press the MENU button on the remote
control.
Yes
No
2. Press the ▲▼ buttons to select Disc Manager, and then press the
ENTER or ► button.
MOVE
ENTER
RETURN
EXIT
3. Press the ▲▼ buttons to select Edit Compatible, and then press the
ENTER or ► button.
4. Press the ◄ ► buttons to select Yes, and then press the ENTER
button.
The Edit Compatible process will start.
After performing Edit Compatible, you can move to the title menu of
the disc by pressing the Title MENU button.
English - 72
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional Information
Play mode settings are different from the settings
configured in the Settings menu.
Troubleshooting
If your product malfunctions, go through the
checkpoints below before contacting a Samsung
authorized service center.
Checkpoint 1
The disc does not support all selected
functions. In this case, some settings
configured in the settings menu may
not work properly.
▌Power
The input is displayed for a while when the power is
turned on.
Cannot change the aspect ratio.
Checkpoint 1
The aspect ratio is fixed for DVD discs.
Checkpoint 1
The DVD recorder requires some time
(See page 33.)
to initialize and the input will be
displayed for approx. 10 seconds after
it is turned on.
The angle operation does not work while playing a
DVD disc.
Checkpoint 1
The angle operation is available only when
the disc contains images captured from
different angles.
▌Recording
Cannot record TV programs.
The selected audio and/or subtitle language is not
played.
Checkpoint 1
Check whether the power cord is
securely plugged into the power outlet.
Checkpoint 1
Audio and subtitle languages are
discspecific.
Checkpoint 2
Check the free space on your
Only the sound and subtitle languages
contained on the DVD disc are available
and displayed in the disc menu.
DVD-RAM/DVD±RW/DVD±R discs.
I pressed the REC button but there is no response.
Checkpoint 1
Recording is possible for
DVD-RAM/DVD±RW/DVD±R discs
only. If a program is copy protected, it
cannot be recorded.
▌Video
The disc revolves, but no image or bad quality
images are displayed.
Checkpoint 1
Check whether there is damage to or any
foreign material on your disc.
▌Playback
Cannot play the disc.
Checkpoint 2
Some low quality discs may not play
properly.
Checkpoint 1
Check whether the disc is inserted
correctly with the label facing up.
Checkpoint 3
If scenes change from dark to bright
Checkpoint 2
Checkpoint 3
suddenly, the screen may shake vertically
temporarily, but this is not a default of the
unit.
Check the regional code of the DVD disc.
This DVD recorder cannot play some
types of discs. (See pages 5, 48.)
icon appears on the screen.
Checkpoint 1
You cannot use this operation or function
due to one of the following reasons:
(1) Your DVD disc restricts it.
(2) Your DVD disc does not support this
feature (for example: angles)
(3) The feature is not available at the
moment.
(4) You've requested a title, chapter, or
scan time that is out of range.
English - 73
Download from Www.Somanuals.com. All Manuals Search And Download.
Abnormal HDMI output screen.
▌
Sound
Checkpoint 1
If snow noise appears on the screen,
No sound.
it means that the TV does not support
HDCP (High-bandwidth Digital Content
Protection).
Checkpoint 1
Are you watching a program in scan
mode?
If you are playing a program at a speed
other than normal and fast1 speed, the
sound will not be heard.
HDMI output Jitter
Checkpoint 1
Check your TV system setup correctly.
Checkpoint 2
Checkpoint 3
Check the connections and settings.
Checkpoint 2
Screen Jitter may occur when the frame
rate is converted from 50Hz to 60Hz
for 720p/1080i HDMI (High Definition
Multimedia Interface)
Check whether the disc is damaged.
Clean the disc, if necessary.
Checkpoint 4
Check whether the disc is inserted
correctly with the label facing up.
Output.
Checkpoint 3
Please refer to the user's manual of your TV.
No audio output.
Checkpoint 1
Check whether you have selected
the correct digital output options in
the Audio Output Options menu.
(See page 32.)
▌
Remote Control Unit
The remote control doesn't work.
Checkpoint 1
Point the remote control at the remote
control sensor on your DVD recorder.
Allow for proper distance. Remove
obstacles between your DVD recorder and
the remote control.
▌
Timer Recording
Timer lamp flickers.
Checkpoint 2
Check whether the batteries are empty.
Checkpoint 1
Check if there is enough space in the
disc for recording.
Checkpoint 2
Check whether the current disc is
recordable or not.
▌
Other
Make sure to check before the start
time of recording.
I forgot my password for parental supervision.
Checkpoint 1
Remove the disc. Press the INPUT SEL.
Timer recording does not work properly.
and REC MODE buttons on the front panel
of the DVD Recorder simultaneously for 5
seconds or more when the power is on.
All settings including the password will
revert to the factory settings. Do not use
this unless absolutely necessary.
Checkpoint 1
Re-check the recording time and the
end time settings again.
Checkpoint 2
Recording will be cancelled, if the
power is disconnected due to a
power failure or other similar reason,
while recording.
(Note that this function is possible only
when no disc is inserted.)
Is it possible to change a subtitle and an audio
signal on a recorded disc?
▌
HDMI
Checkpoint 1
A recorded disc is played with only
the subtitle and the audio signal
which were selected during recording.
No HDMI output.
Checkpoint 1
Check to see that the Video output is HDMI
enabled.
Other problems.
Checkpoint 2
Checkpoint 3
Check the connection between the TV and
the HDMI jack of the DVD Recorder.
Checkpoint 1
Read the table of contents and then find
and read the section describing your
problem, and follow the instructions given.
See if your TV supports this 480p/720p/
1080i DVD Recorder.
Checkpoint 2
Turn your DVD recorder off and on.
Checkpoint 3
If the problem still persists, contact a
nearby Samsung service center.
English - 74
Download from Www.Somanuals.com. All Manuals Search And Download.
Cable Box/Satellite Receiver Brand Code Table
Cable box brand
Code number
▌Cable box brand
Eastern
0002, 0274, 0418
Electricord
Emerson
Everquest
Focus
0078
Cable box brand
3M
Code number
0797, 0303, 0015, 0014
0033
0040, 0015
ABC
0003, 0011, 0017, 0008, 0014,
0400
Accuphase
0007, 0001, 0013, 0206, 0047,
Fosgate
0276
0237, 0033
Fujitsu
0246
0003, 0013, 0047, 0001, 0011,
Funai
0248, 0019
Acorn
0017, 0014, 0206, 0007
FutureVision
Garrard
0649
1102, 0237
0153
Action
0237
Gateway
GC Electronics
0764
Active
0237, 1102
0207, 0056, 0330, 0016, 0040,
Aim
0015
0077, 0030
Allegro
Amark
0315, 0153
GE
0232, 0233, 0144, 0021
0008, 0277, 0144, 0056
Gemini
0015, 0070, 0057, 0242, 0014,
American
Americast
Antronix
Anvision
Apache
Arbatron
Archer
ASE
0060
0797, 0013, 0400
0899
General Instrument
0476,0011,0014,0098,0810,
0207, 0022
0024,0003,0015,0276,1376,1476
0211, 0111
GHZ
0078
0770
Gibraltar
Global
0003
0014, 0011, 0003, 0476
1327
0153, 0022, 0207, 0039, 0797,
GMI
0069, 0057, 0015, 0797
0237, 0260
Glodstar
Goodmind
Gradiente
Hamlin
0144, 0040
1080
0770, 0797
Auna
1269
1136
BBT
0267
0020, 0009, 0034, 0259, 0015,
BCC
0276
0273, 0206
Belcor
0056, 0022
Healthway Interactive
Hitachi
0058, 1020, 1015, 0769
Bell & Howell
Bell Atlantic
Bell South
Bestlink
0014
0011, 0154, 0009, 0008, 0003,
0641
0033, 0014, 0255
0899
Houston Tracker
Hwalin
Hytex
0011
0303
0303
Betavue
0022
0007
British Telecom
BVS
0003
IBM
0670
0641
IEEC
1018
Cable Healthcare
Cable Star
Cabletenna
Cableview
Century
0769, 0058
Interbuy
Jasco
0274
0056
0315, 0153, 0015
0022, 0039
Jebsee
Jerrold
0014, 0400
0022
0003, 0014, 0276, 0011, 0012,
0153, 0618, 0008, 0315
0020, 0024, 0015, 0047, 0098,
Citation
0017
0476, 0031, 0029,
Citizen
0153, 0315, 0078, 0242
0111, 0032, 0054, 0810, 0028
Clearmaster
ClearMax
Colour Voice
Comband
Comtec
0883
Kuang Yu
Leon
0024
0883, 1247
0069, 0015
0031, 0025
LG
0040, 0144
0233, 0232
Linsay
0440
0274
Macom
Maestro
Magnavox
Millennium
Memorex
Mitsubishi
Motorola
0033
Comtronics
Comtronics Eagle
Contec
0060, 0040
0812
0040, 0060
0797, 0027, 0032, 0334, 0069
0019
0618, 0153
Coolmax
Curtis Mathes
Dae Ryung Eagle
Dae Ryung
Diamond
Digeo
0883
0000
0015, 0242
0003
0008
0476, 0276, 1476, 0810, 1376,
1254, 0400, 1106
0156, 0078, 0063, 0203
0069, 0015, 1018, 0303
0012
0008, 0877, 0477, 0277, 1877
0035
Movie Time
MS
1476,1897
0637
Digi
MultiVision
Myrio
Director
0476
1117
Dumont
0637
NET
0274
Eagle Comtronics
0060, 0028
Next Level
0764, 1316, 1315, 1314
English - 75
Download from Www.Somanuals.com. All Manuals Search And Download.
Cable box brand
Nexus
Code number
Cable box brand
Standard Components
Code number
0203, 0096, 0155
0770
0003, 0015, 0047, 0014, 0098,
Northcoast
Nova Vision
Novabeam
Novaplex
NSC
0671, 0314
Starcom
0305
0277, 0008
Stargate
0015, 0040, 0770, 0865, 0797,
0277
0305, 0014
0618, 0277, 0017, 0008
Starquest
StarSight
Stealth
0015
0156, 0070, 0203, 0063, 0400,
0542, 0422
0012, 0618, 0022, 0637, 0010,
0044
0274
Oak
0019, 0007, 0303, 0248, 0017
Stellar One
Storm
0807
Omega
Omniview
Optimus
Pace
0015
1018, 0637
0371
Suena Madritel
Supercable
Supermax
Sylvania
Tandy
1230
0021
0276
0008,0237,0277,0477,0877,
0883
1877,0810,1376,1476
0001
Pacific Bell
0843
0258
Panasonic
0107, 0021, 0144, 0008, 0124,
Tatung
0097
0307, 0000, 0040
Teac
1018
Panther
Paragon
Penney
Philips
0637
Technics
Teknika
0029
0000, 0525, 0008
0146
0637, 0000
Teleavia
TeleCaption
Teleview
Texscan
TFC
0040
0025, 0031, 0290, 0027, 0030,
0221
0153, 0060, 0242, 0028, 0334,
0063, 0040
0211, 0029, 0259,0307, 0652,
0001, 0096, 0010
0013, 0069, 0649, 0255, 0305,
0310
0032, 0111, 0317
Thomson
Timeless
Tocom
1256
Pioneer
0144, 0023, 0533, 1877, 0877,
0418, 0274, 0040
0260, 0008, 0277, 0477
0012, 0013, 0029, 0019, 0059,
Popular Mechanics
Prelude
0400
0017
0770
Torx
0003
Prism
0012, 0013, 0059
Toshiba
Trans PX
Trinity
0000
Protelcon
Pulsar
0786
0303, 0276, 0153, 0315
0000, 0040
1248
Quasar
0000
Tristar
0883
Quest
0144, 0020
TS
0255, 0024, 1018, 0003, 0303
R Line
0040
Tusa
Tusa
RadioShack
Rampage
Ranger
0883, 0015, 0315, 0303, 0797
TV COMM
TV Guide
TV86
0035, 0019
0255
1476
1247
0063, 0040
RCA
0021, 0060, 0797,0047, 1256,
Uniden
Unika
0225, 0022
0843
0207, 0153, 0022
Realistic
Recoton
Regal
0207, 0153
United Artists
United Cable
Universal
0007
0153, 0400
0003, 0014, 0011, 0276
0259, 0020, 0273, 0279, 0276
0191, 0078, 0207, 0056, 0022,
Regency
Rembrandt
RK
0002, 0020, 0682
0039, 0153, 0077, 0322, 0315
0070, 0153, 0040, 0022, 0011
US Electronics
V2
0276, 0008, 0003, 0017
0304, 0479
0883
Runco
0000
Verizon
0246
Samsung
0040, 0144, 0023, 0003, 0070,
Video way
Video Works
Vidtech
0250, 0000
0000, 1898
0124
Sasktel
1737
0244
Scientific Atlanta
0008, 0277, 0017, 0006, 0237,
0025, 0477, 0207, 0877, 0003,
Viewmaster
Viewstar
0883, 0770
0012, 0000, 0021, 1877
0258, 0289, 0060, 0063, 0211,
Seam
0510
0618, 01530027, 0111, 0030, 0121
Sears
0510
Vision
0883
Sejin
1265
Visionetics
Vortex View
WaveMaster
Wiso
1264
Siemens
Sigma
0246
0883
0019
0565
Signal
0040, 0015, 0011, 0035
0078
Signature
SkyCable
Skygiant
SL Marx
Sony
0011
Zenith
0000, 0525, 0054, 0017, 0039,
0153, 0060, 0315, 0191, 0899
0400
0112
1091
Zenitek
0040
1006, 1506, 1606
0769, 0058
0058
Spectradyne
Spectravision
Sprucer
0021, 0307, 0010, 0144
English - 76
Download from Www.Somanuals.com. All Manuals Search And Download.
▌Satellite receiver brand
Satellite receiver brand Code number
AlphaStar
0772
Atlantic Telephone
Bell ExpressVu
Century
1333
0775
0856
Chaparral
0216
Crossdigital
DirecTV
1109
1887, 0749, 0566, 0392, 1749,
0099, 1109, 1076, 1442, 1856,
0247, 1142, 1639, 0724, 0639,
Dish Network System
Dishpro
0775, 1005, 1170
0775, 1005
0775, 1170, 1005
0775
Echostar
Expressvu
Galaxis
0863
GE
0566
General Instrument
GOI
0361, 0869, 0627
0775
Gradiente
Hitachi
0856
0819, 0749
0775
Houston Tracker
HTS
0775
Hughes Network Systems 0749, 1749, 1442, 1142
Humax
1176, 1359, 1048, 0863, 0283
Innova
0099
Jerrold
0361, 0036, 0627
0775, 1170
0722, 0724
0869
JVC
Magnavox
McIntosh
Memorex
Mitsubishi
Motorola
NEC
0724
0749
0869
1270, 0496, 0499, 0507, 0508
0099
Netsat
Next Level
Optimus
Panasonic
Paysat
0869
0724
0247, 0701
0724
Philips
1076, 1142, 0724, 0722, 0749,
1442, 1749, 0856, 0775, 0099
0361, 0627, 0869
0392, 0566
1367
Primestar
Proscan
QNS
RadioShack
RadioShack
Samsung
Sky
0869
0566, 0392, 0143, 0855
1109, 1276
0856, 0099, 1856
0639, 1639
0869
Sony
Star Choice
Star Trak
Thomson
Tivo
0869, 0772
0566, 0392
1142, 1442
0790, 0749, 1749, 1285
1333, 1358
0724, 0722
0361
Toshiba
UEC
Uniden
Video Cipher II Plus
Zenith
0856, 1856
English - 77
Download from Www.Somanuals.com. All Manuals Search And Download.
Error Message Solutions
Before contacting a Samsung authorized service center, perform the following simple checks.
Error Message
Solution / Explanation
You cannot record a copy protected
movie.
You can’t record the video since it is protected by copyright.
ꢀ
You cannot record. This disc is
protected.
This disc cannot be formatted (the
disc is protected).
This disc cannot be renamed
(the disc is protected).
The disc you are using is protected. To record on this disc or use this
function, disable the disc protection function. Refer to page 70.
ꢀ
The disc cannot be finalized (the disc
is protected).
This [Menu] is not available (the disc
is protected).
The disc cannot be played, Please
check the regional code of the disc.
The disc does not match the regional code for your area and cannot be
played on this device.
ꢀ
This disc cannot be formatted.
Please check the disc.
You could not format the disc
because of error detection.
Make sure there are no scratches or dirt on the disc.
ꢀ
ꢀ
You could not finalize the disc
because of error detection.
You could not unfinalize the disc
because of error detection.
The disc cannot be played, Please
check the TV system.
PAL format discs cannot be played on this unit.
The disc can be neither played nor
recorded.
Make sure there are no scratches or dirt on the disc.
ꢀ
ꢀ
Disc may have a malfunction caused from a power outage during
recording (Only DVD+R Disc).
The disc cannot be played, Please
check the disc.
If the disc has invalid information,
no more titles can be recorded.
Please format the disc beforehand.
You can’t use the disc because it contains errors from previous recordings.
Use the disc after formatting.
ꢀ
English - 78
Download from Www.Somanuals.com. All Manuals Search And Download.
Error Message Solutions
Error Message
Solution / Explanation
You can’t use the disc because it contains errors from previous
recordings.
ꢀ
Error is detected on the disc.
Use the disc after formatting.
When operating, errors happen. Turn off the device. (To turn off, press
and hold the power button on the front of the device for 10 seconds.)
After turning off, press the Open button and remove the disc from the
device.
ꢀ
ꢀ
System error is found.
Please try it again after turning off
the power.
Make sure the DV device is connected properly to the DV connection
Jack. If it is connected properly, turn it off and on once again.
The DV device is not connected.
If you are unable to solve the problem after reading the above instructions, note:
The model and serial number on the rear of your DVD Recorder
The warranty information
ꢀ
ꢀ
ꢀ
A clear description of the problem
Then contact your nearest SAMSUNG authorized service center. Call 1-800-SAMSUNG for a center near you.
English - 79
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Power requirements
Power consumption
Weight
120V AC, 60Hz
19 Watts
5.1 lb
General
Dimensions
16.9 in(W) x 8.5 in(D) x 1.9 in(H)
+41°F to +95°F
Operating temp.
Other conditions
Video (1,2)
Keep level when operating. Less than 75% operating humidity
1.0 V p-p at 75Ω load, sync negative
S-Video input (Y: 1.0Vp-p, C: 0.286Vp-p at 75Ω load)
Max.Audio Input Level : 2Vrms
IEEE 1394(4p) compatible jack
Analog output jacks 1, 2
Input
Audio(1,2)
DV Input
Audio
Optical/Coaxial digital audio output
Full scale Analog output level : 2Vrms
Video output jack
Output
S-Video output (Y:1.0Vp-p, C:0.286Vp-p at 75Ω load)
Video
Component output (Y: 1.0Vp-p, Pb: 0.70Vp-p, Pr: 0.70Vp-p at
75Ω load)
HDMI output (480p, 720p, 1080i)
MPEG-II
Picture Compression format
Audio Compression format
Dolby Digital 2ch/256kbps
Recording
XP (about 8 Mbps), SP (about 4 Mbps), LP (about 2 Mbps),
EP (about 1.2 Mbps or about 0.8 Mbps)
Recording Quality
Audio Frequency Response
20 Hz ~ 20 kHz
For DVD discs, audio signals recorded at 96kHz sampling
frequency are converted and output at 48kHz.
Audio Output
Disc Type
DVD
48 / 96kHz
48kHz
AUDIO CD(CDDA)
44.1kHz
Analog Audio Output
Digital Audio Output
44.1kHz
English - 80
Download from Www.Somanuals.com. All Manuals Search And Download.
Warranty
LIMITED WARRANTY TO ORIGINAL PURCHASER
This SAMSUNG brand product, as supplied and distributed by Samsung Electronics America, Inc. (SAMSUNG) and
delivered new, in the original carton to the original consumer purchaser, is warranted by SAMSUNG against manufac-
turing defects in materials and workmanship for a limited warranty period of:
One (1) Year Parts / Ninety (90) days Labor
(90 days Parts and Labor for Commercial Use)
This limited warranty begins on the original date of purchase, and is valid only on products purchased and used in
the United States. To receive warranty service, the purchaser must contact SAMSUNG for problem determination and
service procedures. Warranty service can only be performed by a SAMSUNG authorized service center. The original
dated bill of sale must be presented upon request as proof of purchase to SAMSUNG or SAMSUNG’s authorized ser-
vice center. Transportation of the product to and from the service center is the responsibility of the purchaser.
SAMSUNG will repair or replace this product, at our option and at no charge as stipulated herein, with new or recon-
ditioned parts or products if found to be defective during the limited warranty period specified above. All replaced parts
and products become the property of SAMSUNG and must be returned to SAMSUNG. Replacement parts and prod-
ucts assume the remaining original warranty, or ninety (90) days, whichever is longer.
SAMSUNG ís obligations with respect to software products distributed by SAMSUNG under the SAMSUNG brand
name are set forth in the applicable end user license agreement. Non-SAMSUNG hardware and software products, if
provided, are on an ”AS IS” basis. Non-SAMSUNG manufacturers, suppliers, publishers, and service providers may
provide their own warranties.
This limited warranty covers manufacturing defects in materials and workmanship encountered in normal, and except
to the extent otherwise expressly provided for in this statement, noncommercial use of this product, and shall not apply
to the following, including, but not limited to: damage which occurs in shipment; delivery and installation; applications
and uses for which this product was not intended; altered product or serial numbers; cosmetic damage or exterior fin-
ish; accidents, abuse, neglect, fire, water, lightning or other acts of nature; use of products, equipment, systems, utilities,
services, parts, supplies, accessories, applications, installations, repairs, external wiring or connectors not supplied and
authorized by SAMSUNG, or which damage this product or result in service problems; incorrect electrical line voltage,
fluctuations and surges; customer adjustments and failure to follow operating instructions, cleaning, maintenance and
environmental instructions that are covered and prescribed in the instruction book; product removal or reinstallation;
reception problems and distortion related to noise, echo, interference or other signal transmission and delivery prob-
lems. SAMSUNG does not warrant uninterrupted or error-free operation of the product.
THERE ARE NO EXPRESS WARRANTIES OTHER THAN THOSE LISTED AND DESCRIBED ABOVE, AND NO
WARRANTIES WHETHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, SHALL APPLY AFTER THE EXPRESS WARRANTY
PERIODS STATED ABOVE, AND NO OTHER EXPRESS WARRANTY OR GUARANTY GIVEN BY ANY PERSON, FIRM
OR CORPORATION WITH RESPECT TO THIS PRODUCT SHALL BE BINDING ON SAMSUNG. SAMSUNG SHALL
NOT BE LIABLE FOR LOSS OF REVENUE OR PROFITS, FAILURE TO REALIZE SAVINGS OR OTHER BENEFITS, OR
ANY OTHER SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES CAUSED BY THE USE, MISUSE OR INABILITY
TO USE THIS PRODUCT, REGARDLESS OF THE LEGAL THEORY ON WHICH THE CLAIM IS BASED, AND EVEN
IF SAMSUNG HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. NOR SHALL RECOVERY OF ANY
KIND AGAINST SAMSUNG BE GREATER IN AMOUNT THAN THE PURCHASE PRICE OF THE PRODUCT SOLD BY
SAMSUNG AND CAUSING THE ALLEGED DAMAGE. WITHOUT LIMITING THE FOREGOING, PURCHASER ASSUMES
ALL RISK AND LIABILITY FOR LOSS, DAMAGE OR INJURY TO PURCHASER AND PURCHASERíS PROPERTY AND TO
OTHERS AND THEIR PROPERTY ARISING OUT OF THE USE, MISUSE OR INABILITY TO USE THIS PRODUCT SOLD
BY SAMSUNG NOT CAUSED DIRECTLY BY THE NEGLIGENCE OF SAMSUNG. THIS LIMITED WARRANTY SHALL NOT
EXTEND TO ANYONE OTHER THAN THE ORIGINAL PURCHASER OF THIS PRODUCT, IS NONTRANSFERABLE AND
STATES YOUR EXCLUSIVE REMEDY.
Some states do not allow limitations on how long an implied warranty lasts, or the exclusion or limitation of incidental or
consequential damages, so the above limitations or exclusions may not apply to you. This warranty gives you specific
legal rights, and you may also have other rights which vary from state to state.
To obtain warranty hardware service, please contact SAMSUNG at:
S
amsung Electronics America, Inc.
105 Challenger Road Ridgefield Park, NJ 07660-0511
Download from Www.Somanuals.com. All Manuals Search And Download.
Contact SAMSUNG WORLD WIDE
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG cus-
tomer care center.
Region
Country
CANADA
MEXICO
Customer Care Center ꢌ
1-800-SAMSUNG (7267864)
01-800-SAMSUNG (7267864)
1-800-SAMSUNG (7267864)
0800-333-3733
0800-124-421
800-726-7864(SAMSUNG)
0-800-507-7267
1-800-10-7267
800-6225
1-800-299-0013
1-800-234-7267
800-7267
1-800-682-3180
1-800-751-2676
1-800-7267-864
1-800-100-5303
02 201 2418
844 000 844
38 322 887
Web Site
North America
U.S.A
ARGENTINE
BRAZIL
CHILE
COSTA RICA
ECUADOR
EL SALVADOR
GUATEMALA
JAMAICA
Latin America
PANAMA
PUERTO RICO
REP. DOMINICA
TRINIDAD & TOBAGO
VENEZUELA
BELGIUM
CZECH REPUBLIC
DENMARK
FINLAND
09 693 79 554
FRANCE
08 25 08 65 65 (€ 0,15/Min)
01805 - 121213 (€ 0,14/Min)
06 40 985 985
199 153 153
02 261 03 710
0900 20 200 88 (€ 0.10/Min)
231 627 22
0 801 801 881
80 8 200 128
0850 123 989
902 10 11 30
08 585 367 87
0870 SAMSUNG (7267864)
0818 717 100
8-800-200-0400
8-800-502-0000
1300 362 603
800-810-5858, 010- 6475 1880
2862 6001
GERMANY
HUNGARY
ITALIA
LUXEMBURG
NETHERLANDS
NORWAY
Europe
POLAND
PORTUGAL
SLOVAKIA
SPAIN
SWEDEN
U.K
REP. Ireland
RUSSIA
UKRAINE
AUSTRALIA
CHINA
HONG KONG
CIS
3030 8282
1600 1100 11
INDIA
INDONESIA
JAPAN
MALAYSIA
PHILIPPINES
SINGAPORE
0800-112-8888
0120-327-527
1800-88-9999
1800-10-SAMSUNG (7267864)
1800-SAMSUNG (7267864)
1800-29-3232
Asia Pacific
THAILAND
02-689-3232
TAIWAN
0800-329-999
1 800 588 889
0860 7267864 (SAMSUNG)
800SAMSUNG (7267864)
VIETNAM
SOUTH AFRICA
U.A.E
Middle East & Africa
Download from Www.Somanuals.com. All Manuals Search And Download.
HEADQUARTERS
105 Challenger Road, Ridgefield Park,
N.J.07660-0511
TEL: 1-800-SAMSUNG
SERVICE DIVISION
400 Valley Road, Suite 201
Mount Arlington, NJ 07856
1-800-SAMSUNG (726-7864)
AK68-01315A-02
Download from Www.Somanuals.com. All Manuals Search And Download.
|
Radio Shack Baby Toy 60 2792 User Guide
Raypak Swimming Pool Heater R185 User Guide
Ricoh All in One Printer FAX5600L User Guide
Saeco Coffee Makers Espresso Maker RI9753 47 User Guide
Sage Software Range 58 User Guide
Salton Gas Grill GP200RED User Guide
Samsung Cell Phone 11252009_D5 User Guide
Samsung Security Camera SNC B2331P User Guide
Schumacher Automobile Battery Charger PS 1562A User Guide
Sears Battery Charger 20071233 User Guide