Sanyo Vacuum Cleaner SC 150 User Guide

INSTRUCTION MANUAL  
VACUUM CLEANER  
SC-150  
SC-180  
Contents  
IMPORTANT SAFETY  
INSTRUCTIONS  
1,2  
3
FEATURES  
NAMES OF PARTS  
4
ASSEMBLING THE VACUUM  
CLEANER  
5
6,7  
USING THE VACUUM CLEANER  
REPLACING THE PAPER BAG  
PRODUCT MAINTENANCE  
TROUBLESHOOTING  
8
9
10  
10  
REPLACEMENT PARTS  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Do not touch the agitator while it is spinning.  
To reduce the risk of electric shock, this appliance has a polarized plug (one blade  
is wider than the other). This plug will fit in a polarized outlet only one way. If the  
plug dose not fit fully in the outlet, reverse the plug. If it still does not fit, contact a  
qualified electrician to install the proper outlet. Do not change the plug in any way.  
SAVE THESE INSTRUCTIONS  
This vacuum cleaner is intended for household use only.  
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
FEATURES  
CLEANS CARPETS AND OTHER FLOORING  
Crevice tool  
Upholstery tool &  
Dusting brush  
CLEANING IN NARROW SPACES AND HARD-TO-REACH  
PLACES, SUCH AS UNDER BEDS, ETC.  
TABLETOP CLEANING AND CLEANING OF SLIDING WINDOW  
OR DOOR GROOVES, ETC.  
Crevice  
tool  
Upholstery tool &  
Dusting brush  
Crevice tool  
Upholstery tool &  
Dusting brush  
WALL-MOUNTABLE STORAGE  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
NAMES OF PARTS  
FRONT  
SC-150  
SC-180  
Hole for  
wall-mountable  
storage  
Hole for  
wall-mountable  
storage  
Grip  
Grip  
Hose holder  
Hose holder  
Hose  
Hose  
Button  
Button  
Holding latch  
Holding latch  
ON/OFF switch  
ON/OFF switch  
Lever  
Floor nozzle  
Turbine brush  
Clip  
Crevice tool  
Cord storage  
hook  
Extension pipe  
Upholstery tool &  
Dusting brush  
Power cord  
REAR  
WARNING:  
Operate vacuum cleaner only at the voltage specified on nameplate.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
ASSEMBLING THE VACUUM CLEANER  
Caution: Do not connect the power plug to the wall socket until assembly is  
completed.  
Insert the hose into the main  
unit.  
Attach the extension pipes and the  
floor nozzle as shown.  
Match the imprinted numbers as  
shown.  
1
2
3
2
Click into place  
1
REMOVAL  
REMOVAL  
Rotate the rings in the direction shown by  
the arrows and pull pipes apart.  
Pull while pressing button.  
Button  
2
1
1
2
Ring  
Fit the floor nozzle slot onto the  
floor nozzle mount.  
Set the holding latch into the  
latch slot.  
3
4
Button  
Latch slot  
Holding  
latch  
Floor nozzle slot  
Floor nozzle  
mount  
REMOVAL  
Hook the hose holder onto the  
hose holder mount  
5
Slide the button in  
the direction shown  
by the arrow.  
Button  
2
1
Hose holder  
Floor nozzle  
mount  
Caution: Do not lift or carry the vacuum cleaner by the hose or extension pipes. There is a hazard if  
the hose or extension pipes become detached.  
Be careful not to sandwich the electrical cord between the pipe and the main unit when  
inserting the holding latch into the latch slot.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
USING THE VACUUM CLEANER  
ON/OFF SWITCH  
Set the ON/OFF switch to " "to  
1
operate the vacuum cleaner.  
Set the ON/OFF switch to "  
to stop the vacuum cleaner.  
"
2
POWER CORD  
WINDING THE POWER CORD  
Hook the power cord  
1
Wind the power cord around the cord  
storage hooks.  
2
over the clip which is  
located on the upper  
cord storage hook as  
shown.  
Clip  
Secure the power  
cord plug on the  
power cord.  
Plug side  
UNWINDING THE POWER CORD  
Rotate the upper  
cord storage hook  
downward.  
Return the hook to  
the upright position  
before attempting  
to rewind the  
1
2
Upper cord  
storage hook  
power cord.  
CREVICE TOOL  
First, attach the main unit to the  
extension pipes.  
2
When the crevice tool is not in use  
place it in the storage area  
between the cord storage hooks.  
Crevice tool  
1
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
USING THE VACUUM CLENER  
UPHOLSTERY TOOL & DUSTING BRUSH(SC-180 only)  
Press the tabs downward to remove the dusting brush from the  
upholstery tool.  
Insert the front portion of the dusting brush into the groove located  
inside the front of the upholstery tool.  
Tabs  
Pull up on the tabs to reattach the dusting brush to the upholstery tool.  
After use, fix to the extension pipe for storage as shown in the illustration.  
TURBINE BRUSH (SC-180 only)  
The turbine brush has a lever with two  
positions.  
This rug attachment has a small, built-in  
turbine that is driven by the suction force  
of the unit. The turbine drives a brush  
inside the attachment to pick up fine  
particles more efficiently.  
Turbine  
Lever  
RUG FLOOR  
Brush  
Caution:  
Do not touch the agitator while it is spinning.  
Do not vacuum bare floors with lever in "rug" position. Doing so may damage the floor.  
Do not leave the brush rotating for long periods over the same spot. Doing so may  
damage the carpet.  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
REPLACING THE PAPER BAG  
Caution: Be sure to turn the ON/OFF switch to the " "position and disconnect  
the power cord from the wall outlet when replacing the paper bag.  
Always make sure the paper bag is installed properly before using.  
Remove the paper bag.  
Pull the dust cover to remove it.  
1
2
Dust cover  
Throw away the used paper bag.  
Fold down both sides of the new bag.  
3
4
6
Slide the bag collar of the new bag into  
track completely.  
Return the dust cover to its original  
position.  
5
Bag collar  
Track  
Caution:  
Be careful not to clamp the paper bag with the edge of the dust cover.  
Always use genuine Sanyo paper bags to assure maximum performance.  
Never use your vacuum cleaner without a paper bag.  
Never use a broken bag or attempt to reuse old paper bags.  
Obtaining new paper bags  
You can obtain new paper bags form your nearest Sanyo dealer.  
Be sure to specify only genuine Sanyo vacuum cleaner bags. If bags from  
any other manufacturer are used, it may have adverse effects on vacuum  
cleaner performance.  
SC-P11  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
PRODUCT MAINTENANCE  
Caution: Be sure to turn the ON/OFF switch to the " "position and disconnect  
the power cord from the wall outlet before cleaning.  
MAIN UNIT  
1
2
3Wipe with a dry cloth.  
Wet a soft cloth with neutral  
detergent solution and wring  
out excess liquid.  
Wipe the external surfaces  
of the unit.  
L
A
G
R
R
T
E
U
T
E
E
N
D
T
N
E
Caution: Do not use organic solvents, including thinner, or other strong cleaning liquids  
such as alkaline detergents. Use of such substances may cause discoloration or  
deterioration of materials resulting in deformation or cracking.  
CLEANING THE AGITATOR ASSEMBLY  
When threads get caught in the agitator assembly, clean the assembly. (SC-180 only )  
Remove threads caught in the agitor assembly  
Agitator assembly  
by cutting them with scissors.  
Threads  
ELECTROSTATIC MICRON FILTER  
The electrostatic micron filter should be replaced at least once every 8 months in order  
to maintain cleaning performance. Only use genuine Sanyo replacement filters.  
Remove the dust cover and replace  
the electrostatic micron filter.  
Electrostatic micron filter  
1
2 Replace the dust cover.  
Dust cover  
Caution: The electrostatic micron filter cannot be reused.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
TROUBLESHOOTING  
If there is a problem with the vacuum cleaner, carry out the following checks  
to find the cause. If the problem still persists after the checks have been  
made, do not use the vacuum cleaner to prevent the possibility of an accident  
occurring. Turn the ON/OFF switch to the " " position, disconnect the power  
cord from the wall outlet, and contact the place of purchase or your nearest  
Sanyo self-servicing dealer, or call(toll-free) 1-800-421-5013 (USA Only).  
Problem  
Possible cause  
Is the cord plugged completely into the power outlet?  
-Check the connection of the cord into the power outler for  
complete insertion.  
Is the cord damaged where it is connected to the plug, or are  
you pulling on the cord too hard or bending it?  
-Have the cord replaced at a Sanyo self-servicing dealer or a  
Sanyo service station.  
Motor does not operate when  
the switch is depressed to the  
"ON" position.  
Is the electrostatic micron filter dirty?  
-Replace the electrostatic micron filter.  
Is the turbine brush or the hose clogged?  
-If so, clean it out.  
Suction does not improve  
after replacing the bag.  
The lever is not set to the RUG position?  
-Set the lever to the RUG position.  
Is the turbine brush or the hose clogged?  
-If so, clean it out.  
The agitator dose not operate.  
(SC-180 only)  
REPLACEMENT PARTS  
Be sure to use only genuine Sanyo replacement parts.  
Paper bags, electrostatic micron filters and other replacement parts can be  
obtained from your nearest Sanyo dealer.  
If there is on Sanyo dealer in your vicinity, please contact a Sanyo service  
center or call(toll-free) 1-800-5013 (USA Only).  
Part Name & lllustration  
SC-P11  
SC-F2  
Electrostatic micron filter  
Paper bag  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SANYO UPRIGHT VACUUM CLEANER LIMITED WARRANTY  
(USA ONLY)  
OBLIGATIONS  
In order to obtain warranty service, the product must be delivered to and picked up from an Authorized Sanyo  
Factory Service Center at the user's expense, unless specifically stated otherwise in this warranty. The names  
and addresses of Authorized Sanyo Service Centers may be obtained by calling the toll-free number listed below.  
For product operration, authorized service senter referral, service assistance or problem resolution,call  
CUSTOMER INFORMATION 1-800-421-5013  
Weekdays 8:00 AM - 5:00 PM Pacific Time  
For accessories and/or parts not available from an authorized dealer, call  
PARTS ORDER INFORMATION 1-800-726-9662  
Weekdays 8:00 AM - 5:00 PM Pacific Time  
THIS WARRANTY IS VALID ONLY ON SANYO PRODUCTS PURCHASED AND USED IN THE UNITED STATES OF  
AMERICA. THIS WARRANTY APPLIES ONLY TO THE ORIGINAL RETAIL USER AND DOES NOT APPLY TO  
PRODUCTS USED FOR ANY INDUSTRIAL, PROFESSIONAL OR COMMERCIAL PURPOSE. THE ORIGINAL DATED  
BILL OF SALE OR SALES SLIP MUST BE SUBMITTED TO THE AUTHORIZED SANYO SERVICE CENTER AT THE  
TIME WARRANTY SERVICE IS REQUESTED.  
Subject to the OBLIGATIONS above and EXCLUSIONS below, SANYOFISHER COMPANY (SFC) warrants this  
SANYO products against defects in materials and workmanship for the periods of LABOR and PARTS  
specified below. SFC will repair or replace (at its option) the product and any of its parts which fail to conform  
to this warranty.  
The warranty period commences on the date the product was first purchased at retail  
LABOR PARTS MOTOR  
1YEAR 1YEAR 2YEAR  
EXCLUSIONS  
This warranty does not cover (A) the adjustment of customer-operated controls as explained in the appropriate  
model's instruction manual, or (B) the repair of any product whose serial number has been altered, defaced  
or removed.  
This warranty shall not apply to the following items: non-electrical / mechanical attachments; accessories;appearance  
items; disposable parts such as filters, paper bags, belts, headlight lamps and agitator brushes.  
This warranty shall not apply to setup, installation, removal or the product for repair or reinstallation of the  
product after repair.  
This warranty does not apply to repairs or replacements necessitated by any cause beyond the control of SFC  
including, but not limited to, any malfunction, defect or failure caused by or resulting from unauthorized  
service or parts, improper maintenance, operation contrary to furnished instructions, shipping or transit  
accidents, modification or repair by the user, abuse, misuse, neglect, accident, incorrect power line voltage,  
fire, flood or other Acts of God, or normal wear and tear.  
The foregoing is in lieu of all other expressed warranties and SFC does not assume or authorize any party to  
assume for it any other obligation or liability.  
THE DURATION OF ANY WARRANTIES WHICH MAY BE IMPLIED BY LAW (INCLUDING THE WARRANTIES  
OF MERCHANTABILITY AND FITNESS) IS LIMITED TO THE TERM OF THIS WARRANTY. IN NO EVENT  
SHALL SFC BE LIABLE FOR SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING FROM  
OWNERSHIP OR USE OF THIS PRODUCT, OR FOR ANY DELAY IN THE PREFORMANCE OF ITS OBLIGATIONS  
UNDER THIS WARRANTY DUE TO CAUSES BEYOND ITS CONTROL.  
SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS AND/OR  
DO NOT ALLOW THE EXCLUSION OR LIMITATION OF CONSEQUENTIAL DAMAGES, SO THE ABOVE  
LIMITATIONS AND EXCLUSIONS MAY NOT APPLY TO YOU.  
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY HAVE OTHER RIGHTS, WHICH VARY  
FROM STATE TO STATE.  
For your protection in the event of theft or loss of this product, please fill in the information below for your  
own personal records.  
Model No.  
Serial No.  
(Located on back or bottom side of unit)  
Date of Purchase  
Where Purchased  
Purchase Price  
21605 Plummer Street.  
Chatsworth, CA 91311  
9BF-D-P111-00440 0109- 0  
E
Download from Www.Somanuals.com. All Manuals Search And Download.  

Reebok Fitness Home Gym RBEX69740 User Guide
Renesas Switch HD74LV2GT66A User Guide
RIDGID Cordless Saw R8442 User Guide
Roland Printer PNC 5000 User Guide
Roland SONAR RE 301 User Guide
Rosewill Server RSV R4000 User Guide
Russell Hobbs Microwave Oven RHM2505 User Guide
Salton Hot Beverage Maker GK 1202 User Guide
Samsung Washer Q1457AV T S User Guide
Seagate Computer Drive STSHXD301TDB User Guide