DVD PLAYER
DVD-E137A
DVD-1010
DVD-E137B
DVD-E237
DVD-E337K
DVD-E437K
DVD-E537K
AK68-00141L
AU
Download from Www.Somanuals.com. All Manuals Search And Download.
Precautions
Precautions
1
1. Setting up
Ensure that the mains supply in your house complies with that indicated on the identification sticker
located at the back of your play. Install your player horizontally, on a suitable base (furniture),
with enough space around it for ventilation (7~10cm). Make sure the ventilation slots are not
covered. Do not stack other, or heavy devices on top of the player. Do not place the player on
amplifiers or other equipment which may become hot. Before moving the player ensure the disc
tray is empty. This player is designed for continuous use.
Switching off the DVD player to the stand-by mode does not disconnect the electricity supply In
order to separate the player completely from the mains,it has to be disconnected by unplugging the
main plug, especially when left unused for a long period of time.
2. For your safety
Never open the player or any of its components. It can be dangerous for you or certain fragile
components. You could receive an electric shock or touch the laser beam. Do not place your eyes
close to the opening of the disc tray or any other opening to look inside the player.
3. Caution
Protect the player from moisture (dripping or splashing and objects filled with liquids), and excess
heat (e.g.fireplace) or equipment creating strong magnetic or electric fields (i.e.speakers...).
Disconnect the power cable from the mains electricity supply if the player malfunctions.
Your player is not intended for industrial use but for domestic purposes only. Use of this product is
for personal use only. If your player or disc has been stored in a cold atmosphere for example
during transportation in the winter, wait for approximately 2 hours until they have reached room
temperature, before use.
2
3
4. Disc
Be careful handle your discs with care. Hold a disc with finger on the border or hole. Always place
disc with the label facing upward (in case of a single side disc). Always use a soft cloth to clean
disc if necessary, wipe from the centre to the border. Always put disc back into their cases after
playing and store in vertical position. Always place the disc properly into the tray using the proper
guide area. Never use record cleaning sprays, benzine, static electricity liquids or any other solvent,
if the disc surface is dirty. Wipe gently with a soft damp (water only) cloth, never wipe the disc in a
circular motion, since circular scratches are likely to occur and could cause noise during playback.
5. Environmental info
4
5
Batteries: The battery used in this product contains chemicals that are harmful to the environment.
Do not dispose of batteries in the general domestic waste. It is recommended that the replacement
of the battery should be done by a technician.
Disposal of old equipment and packaging: Old equipment and packaging should not be disposed of
as domestic waste, but in accordance with the appliable regulations.
6. Maintenance of Cabinet
For safety reasons, be sure to disconnect the AC power cord from the AC outlet.
• Do not use benzene, thinner, or other solvents for cleaning.
• Wipe the cabinet with a soft cloth.
2
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Before you start
Table of contents
Setup
General Features ........................................................................................................6
......................................................................................
Accessories
Disc Type and Characteristics
7
................................................................................................
Description-Front Panel
8
Display Indicators ....................................................................................................10
..............................................................................................
Description-Rear Panel
11
14
........................................................................................
Tour of the Remote Control
Connections
Choosing a Connection
..............................................................................................
20
Batteries for
Remote Control (AA Size)
Easy Remote Control
(DVD-E237/DVD-E337K/
DVD-E437K/DVD-E537K only)
Basic Functions
Remote Control
............................................................................................................
Playing a Disc
22
24
25
..........................................................................
........................................................................................
Using the Search & Skip Functions
Using the Display Function
Using the Disc and Title Menu ..................................................................................26
Using the Function Menu ..........................................................................................27
................................................................................................................
Repeat Play
28
Advanced Functions
........................................................................
Adjusting the Aspect Ratio (EZ View)
29
31
32
33
34
35
36
37
38
40
41
User’s Manual
Video/Audio Cable
........................................................................................................
Slow Repeat play
....................................................................................
................................................................................
......................................................................................
....................................................................
....................................................................................
Selecting the Audio Language
Selecting the Subtitle Language
Changing the Camera Angle
Using the Instant Replay/Skip Function
Using the Bookmark Function
If remote doesn’t operate
properly:
Install Batteries in the
Remote
..........................................................................
Using the Zoom & 3D Sound Functions
..........................................................................................................
MP3/WMA Play
....................................................................................
Program Play & Random Play
Open the battery cover on the back
• Check the polarity + - of the
batteries (Dry-Cell)
..................................................................................................
1 of the remote.
Picture CD Playback
Karaoke Functions
Insert two AA batteries. Make sure
• Check if the batteries are drained.
Beginning Karaoke Functions ..................................................................................43
Reserving a Song ......................................................................................................44
Vocal Function ..........................................................................................................45
2 that the polarities (+ and -) are
aligned correctly.
• Check if remote sensor is blocked
by obstacles.
Replace the battery cover.
3
Changing Setup menu
................................................................................................
Using the Setup Menu
46
47
49
50
51
53
54
• Check if there is any fluorescent
lighting nearby.
............................................................................
....................................................................................
..............................................................................
..................................................................................
..................................................................................
..............................................................................
Setting Up the Language Features
Setting Up the Audio Options
Surround Sound Speaker Setup
Setting Up the Display Options
Setting Up the Parental Control
Controlling a TV with the remote
Reference
..........................................................................................................
..............................................................................................................
Troubleshooting
55
56
Specifications
4
5
Download from Www.Somanuals.com. All Manuals Search And Download.
General Features
Disc Type and Characteristics
Excellent Sound
Digital Photo Viewer (JPEG)
You can view the Digital Photos on your TV.
This DVD player is capable of playing the following types of discs with the
corresponding logos:
Dolby Digital, a technology developed by
Dolby Laboratories provides crystal clear
sound reproduction.
Repeat
Disc Types
(Logos)
Recording
Types
You can repeat a song or movie simply by
pressing the REPEAT button.
Max.
Disc Size
Characteristics
Playing Time
Screen
Video with MPEG-2 compression technology.
Both regular and widescreen(16:9) pictures
can be viewed.
Single-sided
240 min.
Double-sided
480 min.
• DVD contains excellent
sound and video due to
Dolby Digital and MPEG-2
system.
• Various screen and audio
functions can be easily
selected through the on-
screen menu.
MP3/WMA
This unit can play discs created from
MP3/WMA files.
DVD
12 Cm
Audio
+
Video
Slow Motion
An important scene can be viewed in slow
motion.
Single-sided
80 min.
Double-sided
160 min.
Instant Replay
This function is used to replay the previous
10 seconds of the movie from the current
position.
8 Cm
12 Cm
8 Cm
Programmed Play
You can program tracks to play in desired
order. (CD, WMA, MP3)
VIDEO-CD
AUDIO-CD
Instant Skip
This function skips playback ahead 10 seconds.
74 min.
20 min.
74 min.
20 min.
• Video with CD sound, VHS
quality & MPEG-1
compression technology.
Parental Control
Audio
+
Video
The parental control allows users to set the
level necessary to prohibit children from
viewing harmful movies such as those with
violence, adult subject matter, etc.
Easy Remocon (DVD-E237/DVD-E337K/
DVD-E437K/DVD-E537K only)
You can easily operate this player by combining
only the functions that are frequently used.
Various On-Screen Menu Functions
You can select various languages
(Audio/Subtitle) and screen angles while
enjoying movies.
• CD is recorded as a
Digital Signal with better
audio quality, less
distortion and less
deterioration of audio
quality over time.
NOTE
12 Cm
8 Cm
* Discs which cannot be played with this player.
Audio
• DVD-ROM
• CD-ROM
• CDI
• DVD-RAM
• CDV
EZ VIEW
Easy View can convert Letter Box images to
full screen viewing on your conventional TV.
• HD layer of super Audio CD
• CDGs play audio only, not graphics.
*
Ability to play back may depend on recording conditions.
Disc Markings
• DVD-R, +R
• CD-RW
• DVD+RW, -RW
DIGITAL
SOUND
~
STEREO
PAL
COPY PROTECTION
• Digital
Audio disc
• DTS disc
• Play
Region
Number
• PAL broadcast • Dolby
• Stereo disc
• MP3 disc
system in U.K,
Digital disc
• Many DVD discs are encoded with copy protection. Because of this, you should only connect your
DVD player directly to your TV, not to a VCR. Connecting to a VCR results in a distorted picture from
copy-protected DVD discs.
France,
Germany, etc.
• This product incorporates copyright protection technology that is protected by methods claims of certain U.S.
patents and other intellectual property rights owned by Macrovision Corporation and other rights owners.
Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended
for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation.
Reverse engineering or disassembly is prohibited.
Play Region Number
Both the DVD player and the discs are coded by region. These regional codes must match in order for the
disc to play. If the codes do not match, the disc will not play.
The Region Number for this player is described on the rear panel of the player.
6
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Description-Front Panel
Description-Front Panel
DVD-E437K/DVD-E537K
DVD-E137A/DVD-1010
4 5
1
2 3
7
8 910 11 12 13
6
7
8 9 10 11
12
6
1
DVD-E137B
Front Panel Controls
1. STANDBY/ON
• When the unit is first plugged in, the indicator lights. When STANDBY/ON is pressed on again,
the light goes out and the player is turned on.
2. MIC 1
• Connect microphone 1 for Karaoke functions.
3. MIC 2
7
8 9 10 11
12
6
1
• Connect microphone 2 for Karaoke functions.
4. VOLUME
• Use to adjust microphone volume level.
DVD-E237
5. DIGITAL ECHO
• Use to adjust echo delay.
6. DISC TRAY
• Load the disc here.
7. DISPLAY
• Operation indicators are displayed here.
8. OPEN/CLOSE
• Press to open and close the disc tray.
7
9
6
8
10 11
12
1
9. PLAY/PAUSE (
• Begin or pause disc play.
)
DVD-E337K
10. STOP (
)
• Stops disc play.
11. SKIP (
/
)
• Use to skip a scene or music.
12. EZ VIEW
• Easy View can convert Letter Box images to full screen viewing on your conventional TV.
13. SHUTTLE
• Use during DVD and CD play to fast forward or reverse.
2
7
1
3 4 5
6
8 9 10 11
12
8
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Display Indicators
Description-Rear Panel
DVD-E537K
1
3
2
1
2
3
4
5
6
7
Front Panel Display
1. Disc type indicators
Rear Panel
2. Play / Pause / Forward play
1. DIGITAL AUDIO OUT JACKS
• Use either an optical or coaxial digital cable to connect to a compatible Dolby Digital receiver.
Use to connect to an A/V Amplifier that contains a Dolby Digital or DTS decoder.
3. Displays various messages concerning operations such as
PLAY, STOP, LOAD ...
no DISC : No disc loaded.
2. 5.1CH ANALOG AUDIO OUT JACKS
• Connect to an amplifier with 5.1ch analog input jacks.
OPEN : The disc tray is open.
LOAD : Player is loading disc information.
3. MIXED AUDIO OUT JACKS
• Connect to the Audio input jacks of your television, audio/video receiver.
4. VIDEO OUT JACKS
• Use a video cable to connect to the Video input jack on your television.
5. S-VIDEO OUT JACK
• Use the S-Video cable to connect this jack to the S-Video jack on your television for a higher quality
picture. The S-Video must be selected in the VIDEO OUT SELECT.
6. COMPONENT VIDEO OUT JACKS
• Use these jacks if you have a TV with Component Video in jacks. These jacks provide Pr, Pb and Y
video. Along with S-Video, Component Video provides the best picture quality. The COMPONENT
must be selected in the VIDEO OUT SELECT.
7. VIDEO OUT SELECT SWITCH
• Use the switch to set video out. If COMPONENT is selected, S-Video may not work. If S-Video is
selected COMPONENT may not work.
NOTE
* Select the VIDEO OUT SELECT switch in the Stop or Power Off mode.
10
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Description-Rear Panel
Description-Rear Panel
Rear Panel
DVD-E137A/DVD-1010/DVD-E137B/DVD-E237
1. DIGITAL AUDIO OUT JACKS
• Use either an optical or coaxial digital cable to connect to a compatible Dolby Digital receiver.
Use to connect to an A/V Amplifier that contains a Dolby Digital or DTS decoder.
2. ANALOG AUDIO OUT JACKS
• Connect to the Audio input jacks of your television, audio/video receiver.
3. VIDEO OUT JACKS
• Use a video cable to connect to the Video input jack on your television.
4. S-VIDEO OUT JACK
• Use the S-Video cable to connect this jack to the S-Video jack on your television for a higher
quality picture. The S-Video must be selected in the VIDEO OUT SELECT.
1
6
2
3
4
5
5. COMPONENT VIDEO OUT JACKS
• Use these jacks if you have a TV with Component Video in jacks. These jacks provide Pr, Pb and
Y video. Along with S-Video, Component Video provides the best picture quality.
The COMPONENT must be selected in the VIDEO OUT SELECT.
DVD-E337K/DVD-E437K
6. VIDEO OUT SELECT SWITCH
• Use the switch to set video out. If COMPONENT is selected, S-Video may not work. If S-Video is
selected, COMPONENT may not work.
1
2
4
5
6
3
NOTE
* Select the VIDEO OUT SELECT switch in the Stop or Power Off mode.
12
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Tour of the Remote Control
Tour of the Remote Control
DVD-E137A/DVD-1010/DVD-E137B/DVD-E237
DVD Function Buttons
1. DVD POWER Button
16. PLAY/PAUSE Button (
)
1
2
13
• Turns the power on or off.
• Begin/Pause disc play.
2. NUMBER Buttons
17. SKIP Buttons (
/
)
• Use to skip the title, chapter, or track.
3. STEP Button
18. RETURN Button
• Advances play one frame at a time.
• Returns to a previous menu.
4. I.REPLAY Button
19. INFO Button
• This function is used to replay the previous 10
seconds of the movie from the current position.
• Displays the current disc mode.
5. EZ VIEW Button
• Easy View can convert Letter Box images to full
20. ENTER/DIRECTION Button
14
15
3
4
(UP/DOWN or LEFT/RIGHT Buttons)
• This button functions as a toggle switch.
screen viewing on your conventional TV.
6. SEARCH Buttons (
• Allows you to search forward/backward through a
/
)
21. ANGLE Button
5
6
7
• Use to access various camera angles on a DVD.
disc.
22. MODE Button
16
17
18
7. STOP Button (
)
• Allows you to program a specific order.
8. DISC MENU Button
• Brings up the Disc menu.
23. SUBTITLE Button
8
9
24. AUDIO Button
9. TITLE MENU Button
• Brings up the Title menu.
• Use this button to access various audio functions on
a disc.
19
20
10. CLEAR Button
25. REPEAT A-B Button
• Use to remove menus or status displays from the
• Use to mark a segment to repeat between A and B.
screen.
26. REPEAT Button
11. BOOKMARK Button
• Allows you to repeat play a title, chapter, track, or
disc.
1
12. MENU Button
21
27. ZOOM Button
• Brings up the DVD player’s setup menu.
17
• Enlarges the DVD picture.
22
23
24
13. OPEN/CLOSE Button
10
7
16
8
• To open and close the disc tray.
19
14. 3D Button
11
12
15. I.SKIP Button
20
25
26
27
• This function skips playback ahead 10 seconds.
(Easy Remote Control)
DVD-E237 Only
14
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Tour of the Remote Control
Tour of the Remote Control
DVD-E337K/DVD-E437K
DVD Function Buttons
1. DVD POWER Button
16. PLAY/PAUSE Button (
)
1
2
13
• Turns the power on or off.
• Begin/Pause disc play.
2. NUMBER Buttons
17. SKIP Buttons (
/
)
• Use to skip the title, chapter, or track.
3. STEP Button
18. RETURN Button
• Advances play one frame at a time.
• Returns to a previous menu.
4. I.REPLAY Button
19. INFO Button
• This function is used to replay the previous 10
seconds of the movie from the current position.
• Displays the current disc mode.
5. EZ VIEW Button
• Easy View can convert Letter Box images to full
20. ENTER/DIRECTION Button
14
15
3
4
(UP/DOWN or LEFT/RIGHT Buttons)
• This button functions as a toggle switch.
screen viewing on your conventional TV.
6. SEARCH Buttons (
• Allows you to search forward/backward through a
/
)
21. ANGLE Button
5
6
7
• Use to access various camera angles on a DVD.
disc.
22. MODE Button
16
17
18
7. STOP Button (
)
• Allows you to program a specific order.
8. DISC MENU Button
• Brings up the Disc menu.
23. SUBTITLE Button
8
9
24. AUDIO Button
9. TITLE MENU Button
• Brings up the Title menu.
• Use this button to access various audio functions on
a disc.
19
20
10. CLEAR Button
25. KARAOKE Button
• Use to remove menus or status displays from the
• Use to begin Karaoke functions.
screen.
26. REPEAT Button
11. BOOKMARK Button
• Allows you to repeat play a title, chapter, track, or
disc.
12. MENU Button
21
27. ZOOM Button
• Brings up the DVD player’s setup menu.
1
• Enlarges the DVD picture.
22
23
24
13. OPEN/CLOSE Button
17
10
• To open and close the disc tray.
7
16
8
14. 3D Button
11
12
19
15. I.SKIP Button
25
26
27
• This function skips playback ahead 10 seconds.
20
(Easy Remote Control)
16
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Tour of the Remote Control
Tour of the Remote Control
DVD-E537K
DVD Function Buttons
1. DVD POWER Button
• Turns the power on or off.
18. TV POWER Button
19. SLOW Button
18
19
1
2. ZOOM Button
• Enlarges the DVD picture.
2
3
20. 3D Button
21. OPEN/CLOSE Button
22. CHANNEL Buttons
3. NUMBER Buttons
4. MENU Button
• Brings up the DVD player’s setup menu.
23. I.SKIP Button
• This function skips playback ahead 10 seconds.
5. VOLUME Buttons
6. TV/VIDEO Button
24. PLAY/PAUSE Button (
)
20
4
5
6
7
8
9
• Begin/Pause disc play.
7. I.REPLAY Button
• This function is used to replay the previous 10
seconds of the movie from the current position.
25. SKIP Buttons (
/
)
21
22
23
24
• Use to skip the title, chapter, or track.
26. RETURN Button
8. EZ VIEW Button
• Easy View can convert Letter Box images to full
screen viewing on your conventional TV.
• Returns to a previous menu.
27. INFO Button
• Displays the current disc mode.
25
26
9. STOP Button (
)
28. ANGLE Button
10
11
12
10. DISC MENU Button
• Use to access various camera angles on a DVD.
• Brings up the Disc menu.
27
29. MODE Button
11. TITLE MENU Button
• Allows you to program a specific order.
• Brings up the Title menu.
30. SUBTITLE Button
12. ENTER/DIRECTION Button
(UP/DOWN or LEFT/RIGHT buttons)
• This button functions as a toggle switch.
28
31. AUDIO Button
1
• Use this button to access various audio functions on
a disc.
29
30
31
13
25
13. CLEAR Button
• Use to remove menus or status displays from the
screen.
14
15
32. KARAOKE Button
9
24
10
• Use to begin Karaoke functions.
32
27
14. BOOKMARK Button
15. REPEAT Button
12
• Allows you to repeat play a title, chapter, track, or
disc.
16
17
16. JOG DIAL
• Operates frame by frame play. In CD mode,
performs track search.
17. SHUTTLE DIAL
• Performs fast motion play.
(Easy Remote Control)
18
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Choosing a Connection
Choosing a Connection
The following show examples of connections commonly used to connect the DVD player
with a TV and other components.
Connection to a TV (For Video)
TV (Normal, Widescreen, Projection, etc..)
Before Connecting the DVD Player
Method 3
Method 1
Method 2
• Always turn off the DVD player, TV, and other components before you
connect or disconnect any cables.
Good
Better
Best
Basic Audio
• Refer to the owner’s manual of the additional components you are connecting for
picture
picture
picture
more information on those particular components.
TV
Connection to an Audio System
S-Video
Cable
Video
Cables
Method 1
Method 2
Method 3
AV Cable
AUDIO
SYSTEM
OR
OR
2ch Amplifier
5.1ch Analog Amplifier
Audio Input Jacks
Dolby Digital Decoder
Audio Input Jacks
Digital Audio Input Jacks
R2
L2
DVD
PLAYER
1
R1
L1
e.g) DVD-E537K
Audio Output
Jacks
Video Output
Jack
S-Video Jack
Component Video
Jacks
OR
DVD Player + TV with Video Input Jack
DVD Player + TV with S-Video Input Jack
Method 1
Method 2
DVD
PLAYER
(If S-Video is selected in the VIDEO OUT SELECT.)
e.g) DVD-E537K
DVD Player + TV with Component Video Jacks
(If COMPONENT is selected in the VIDEO OUT SELECT.)
Method 3
Mixed Audio Out
Analog Audio Out
Digital Audio Out
NOTE
• If COMPONENT is selected, S-Video will not work.
• If S-Video is selected, COMPONENT will not work.
20
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing a Disc
Playing a Disc
Step Motion Play (Except CD)
Before Play
7 DVD-E537K : If turning Jog Dial, you can view one by one.
DVD-E137A/DVD-1010/DVD-E137B/DVD-E237/DVD-E337K/DVD-E437K : Press the STEP button on the
remote during play.
- Each time the button is pressed, a new frame will appear.
- No sound is heard during STEP mode.
• Turn on your TV and press the TV/VIDEO button to select the video
mode.
• Turn on your Audio System and select AUX, CD or DVD.
SELECT MENU LANGUAGE
- Press PLAY/PAUSE (
(You can only perform step motion play in the forward direction.)
) to resume normal play.
After plugging in the player, the first time you press the DVD
POWER button, this screen comes up :
If you want to select the language, press a NUMBER button.
(This screen will only appear the very first time you plug in the player.)
Slow Motion Play (Except CD)
8 DVD-E137A/DVD-1010/DVD-E137B/DVD-E237/DVD-E337K/DVD-E437K : Press the
button on the
button, you can select slow motion play for 1/8,
remote during PAUSE or STEP mode. By pressing the
1/4 or 1/2 of normal speed.
DVD-E537K : Press and hold the
button to choose the play speed between 1/8X, 1/4X and 1/2X of
normal during PAUSE or STEP mode, or press the SLOW button you can play slow motion for 1/8 of
normal speed.
- No sound is heard during slow mode.
Play
- Press PLAY/PAUSE (
) to resume normal play.
- When playing a DVD/VCD, reverse slow motion play will not work.
Press the OPEN/CLOSE button.
1 The STANDBY indicator light goes out and the tray opens.
Place a disc gently into the tray with the disc’s label
2 facing up.
RESUME function
When you stop disc play, the player remembers where you stopped, so when you press PLAY (
it will pick up where you left off. (unless the disc is removed, the STOP (
player is unplugged.)
) again,
) button is pressed twice or the
Press the PLAY/PAUSE (
) button or OPEN/CLOSE
3 button to close the disc tray.
Stopping Play
NOTE
4 Press the STOP (
) button during play.
• If the player is left for 5 minutes in pause mode, it will stop.
• If the player is left in the stop mode for more than 30 minutes, the power will automatically shut off.
(Automatic Power-Off Function) (DVD-E137A/DVD-1010/DVD-E137B/DVD-E237 only)
• If the player is left in the stop mode for more than one minute without any user interaction, a screen
saver will be activated, and the TV screen will fade in and out repeatedly. Press the PLAY (
button to resume normal play.
Removing Disc
5 Press the OPEN/CLOSE button.
)
Pausing Play
6 Press the PLAY/PAUSE (
) or STEP button on the remote during play.
) button once again.
• This
icon indicates an invalid button press.
- Screen stops, no sound.
- To resume again, press PLAY/PAUSE (
22
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Search & Skip Functions
Using the Display Function
During play, you can search quickly through a chapter or track or use the skip
function to jump to the next selection.
When Playing a DVD/VCD/CD
During play, press the INFO button on the remote.
Use the UP/DOWN buttons to select the desired
DVD
1
2 item.
DVD
Searching through a Chapter or Track
01
Title
02
Chapter
Time
0:00:13
ENG 5.1CH
DVD-E137A/DVD-1010/DVD-E137B/DVD-E237/DVD-E337K/DVD-E437K : Press the
button on the remote and press again to search at a faster speed on the DVD, VCD, CD.
or
Audio
1
1
Use the LEFT/RIGHT buttons to make the desired
Subtitle
3D Sound
Off
Off
3 setup, then press ENTER.
DVD-E537K : Turn the shuttle dial of remote control during disc play.
DVD-E437K/DVD-E537K : Turn the shuttle dial on the front can a multiple-speed operation if
desiring to use the key on the front.
• You may use the number buttons of the remote control to
directly access a title, chapter or to start the playback from
the desired time.
ENTER
VCD
DVD 2X, 4X, 8X, 16X, 32X, 128X
VCD 4X, 8X
To make the screen disappear, press the INFO
VCD
Track
4 button again.
CD 2X, 4X, 8X
01
0:00:48
Off
Time
To access the desired title when there is more than
3D Sound
ENTER
one in the disc. For example, if there is more than one
movie on a DVD, each movie will be identified.
Title
Skipping Tracks
Most of DVD discs are recorded in chapters so that
you can quickly find a specific passage (similar to
tracks on an audio CD).
Chapter
CD
During play, press the
or
button.
Allows playback of the film from a desired time.
You must enter the starting time as a reference.
CD
• When playing a DVD, if you press the
If you press the
button, it moves to the next chapter.
Time
Audio
01
Track
button, it moves to the beginning of the chapter.
0:00:48
Off
Time
One more press makes it move to the beginning of the previous chapter.
Refers to the language of the film soundtrack. In the
example, the soundtrack is played in English 5.1CH.
A DVD disc can have up to eight different
soundtracks.
3D Sound
ENTER
• When playing a VCD 2.0 in MENU OFF mode, a VCD 1.1 or a CD, if you
press the
button, it moves to the next track. If you press the
button,
it moves to the beginning of the track.
One more press makes it move to the beginning of the previous track.
Refers to the subtitle languages available in the disc.
You will be able to choose the subtitles language or, if
you prefer, turn them off from the screen. A DVD disc
can have up to 32 different subtitles.
• If a track exceeds 15 minutes when playing a VCD and you press the
Subtitle
button, it moves forward 5 minutes. If you press the
backward 5 minutes.
button, it moves
A surround sound effect is generated using only two
3D Sound front speakers.
NOTE
When in VCD 2.0 mode (MENU ON mode), this function
*
does not work. Using DISC MENU button in VCD 2.0, select
Menu On/Off.
24
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Disc and Title Menu
Using the Function Menu
Using the Disc Menu
Using the Function Menu
During the playback of a DVD disc, press the
Press the MENU button during playback.
DVD
1
DVD
1 MENU button on the remote.
Info
Disc Menu
Title Menu
Function
Setup
Disc Menu
Press ENTER key
for Disc Menu
Use the UP/DOWN buttons to highlight Function,
2 then press the RIGHT or ENTER button.
Zoom
Bookmark
Repeat
EZ View
Title Menu
Select Disc Menu using the UP/DOWN buttons,
2 then press the RIGHT or ENTER button.
Function
Setup
Function selection screen appears, Info, Zoom,
ENTER
RETURN
MENU
3 Bookmark, Repeat and EZ View.
ENTER
RETURN
MENU
- Info (See Page 25)
- Zoom (See Page 37)
- Bookmark (See Page 36)
- Repeat (See Page 28)
- EZ View (See Page 29~30)
Use the UP/DOWN button to highlight one of the 5
Using the Title Menu
4 functions. Then press the RIGHT or ENTER button
to access the function.
DVD
During the playback of a DVD disc, Press the
1 MENU button on the remote.
Disc Menu
Title Menu
Press ENTER key
for Title Menu
Select Title Menu using the UP/DOWN buttons,
2 then press the RIGHT or ENTER button.
Function
Setup
ENTER
RETURN
MENU
NOTE
NOTE
• Depending on the disc, the Title and Disc Menus may not work.
• You can also directly select these functions using thier respective buttons on the remote.
• Title Menu will only be displayed if there are at least two titles in the disc.
• You can also use the Title Menu and the Disc Menu, using the TITLE MENU and the DISC MENU buttons
on the remote.
• In VCD2.0, the DISC MENU button works as a conversion switch between Menu On and Menu Off mode.
26
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Repeat Play
Adjusting the Aspect Ratio (EZ View)
Repeat the current track, chapter, title, a chosen section (A-B), or all of the disc.
To play back using aspect ratio (DVD)
Press the EZ VIEW button.
1 • The screen size changes when the button is pressed repeatedly.
• The screen zoom mode operates differently depending on the screen
setting in the initial setup menu.
When playing a DVD
DVD
• To ensure correct operation of the EZ VIEW button, you should set the
correct aspect ratio in the initial setup (See page 52).
Press the REPEAT button on the remote.
1 Repeat screen appears.
ENTER
Chapter Title A - B
Off
Select Chapter, Title or A-B using the
If you are using a 16:9 TV
2 LEFT/RIGHT buttons.
REPEAT A-B
• Press the REPEAT button.
*
For 16:9 aspect ratio discs
• Wide Screen
Displays the content of the DVD title in 16:9 aspect ratio.
Select A-B on screen with the LEFT/RIGHT buttons or
press the REPEAT A-B (DVD-E137A/DVD-1010/
DVD-E137B/DVD-E237 only) button on the remote.
• Press ENTER at the point where you want the repeat play to
start (A). The B is automatically highlighted.
• Press ENTER at the point where you want the repeat play to
stop (B).
• To terminate the function, press the CLEAR button or the
REPEAT A-B (DVD-E137A/DVD-1010/DVD-E137B/
DVD-E237 only) button again.
• Screen Fit
VCD/CD
The top and bottom of the screen are cut off. When playing a
2.35:1 aspect ratio disc, the black bars at the top and bottom of the
screen will disappear. The picture will look vertically stretched.
(Depending on the type of disc, the black bars may not disappear
completely.)
ENTER
Track Disc A - B
Off
• Zoom Fit
The top, bottom, left and right of the screen are cut off and the central
portion of the screen is enlarged.
• A-B REPEAT does not allow you to set point (B) until at least
5 seconds has elapsed after point (A) has been set.
For 4:3 aspect ratio discs
• Normal Wide
Press ENTER.
3
Displays the content of the DVD title in 16:9 aspect ratio. The picture
will look horizontally stretched.
To return to normal play, press REPEAT again,
• Screen Fit
4 then press the LEFT/RIGHT buttons to select Off.
The top and bottom of the screen are cut off and the full screen
appears. The picture will look vertically stretched.
Press ENTER, then press the PLAY/PAUSE
button.
• Zoom Fit
The top, bottom, left and right of the screen are cut off and the central
portion of the screen is enlarged.
• Vertical Fit
When a 4:3 DVD is viewed on a 16:9 TV, black bars will appear at
the left and right of the screen in order to prevent the picture from
looking horizontally stretched.
NOTE
• DVD repeats play by chapter or title, CD and VCD repeat play by disc or track.
• Depending on the disc, the Repeat function may not work.
• When in VCD 2.0 mode (MENU ON mode), this function does not work.
28
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the Aspect Ratio (EZ View)
Slow Repeat play
This feature allows you slowly repeat scenes containing sports, dancing,
musical instruments being played etc. so you can study them more closely.
If you are using a 4:3 TV
For 16:9 aspect ratio discs
• 4:3 Letter Box
Displays the content of the DVD title in 16:9 aspect ratio.
The black bars will appear at the top and bottom of the screen.
When playing a DVD
• 4:3 Pan Scan
The left and right of the screen are cut off and displays the central
portion of the 16:9 screen.
During play, press the PLAY/PAUSE (
) button.
1
• Screen Fit
The top and bottom of the screen are cut off and the full screen
appears. The picture will look vertically stretched.
Press and hold the
button to choose the play speed between 1/8X, 1/4X and
2 1/2X of normal. (DVD-E537K only)
• Zoom Fit
The top, bottom, left and right of the screen are cut off and the central
portion of the screen is enlarged.
Press the
button to choose the play speed between 1/8X, 1/4X and 1/2X of normal.
(DVD-E137A/DVD-1010/DVD-E137B/DVD-E237/DVD-E337K/DVD-E437K only)
Press the REPEAT or REPEAT A-B (DVD-E137A/DVD-1010/DVD-E137B/
For 4:3 aspect ratio discs
3 DVD-E237 only) button to select the point where the function starts. (A)
• Normal Screen
Displays the content of the DVD title in 4:3 aspect ratio.
(See page 28)
• Screen Fit
The top and bottom of the screen are cut off and the full screen
appears. The picture would look vertically stretched.
Press the REPEAT or REPEAT A-B (DVD-E137A/DVD-1010/DVD-E137B/
4 DVD-E237 only) button to select the point where the function ends. (B)
• Zoom Fit
(See page 28)
The top, bottom, left and right of the screen are cut off and the central
portion of the screen is enlarged.
NOTE
• This function may behave differently depending on the type of disc.
NOTE
• The disc will play from A to B repeatedly at the speed you chose.
• To terminate the function, press the CLEAR button or the REPEAT or REPEAT A-B (DVD-E137A/DVD-1010/
DVD-E137B/DVD-E237 only) button again.
• A-B REPEAT does not allow you to set point (B) until at least 5 seconds has elapsed after point (A) has been set.
30
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting the Audio Language
Selecting the Subtitle Language
You can select a desired language quickly and easily with the AUDIO button.
You can select a desired subtitle quickly and easily with the SUBTITLE button.
Using the SUBTITLE button
Using the AUDIO button
Press the SUBTITLE button.
DVD
1
ENG
On
Use the LEFT/RIGHT buttons to select the
2 desired subtitle language.
Press the AUDIO button.
1
Use the LEFT/RIGHT buttons to select the
2 desired language on a DVD.
Use the UP/DOWN buttons to determine
3 whether or not the subtitle will be displayed.
- The audio languages are represented by abbreviations.
ENG
Off
- Initially, the subtitling will not appear on screen.
Use the LEFT/RIGHT buttons to select Stereo,
- The subtitle languages are represented by abbreviations.
3 LEFT or RIGHT. (On VCD/CD)
VCD/CD
NOTE
NOTE
• This function depends on what languages are encoded on the disc and may not work with all DVDs.
• This function depends on what languages are encoded on the disc and may not work with all DVDs.
• A DVD disc can contain up to 8 audio languages.
• A DVD disc can contain up to 32 subtitle languages.
•
How to have the same audio language come up whenever you play a DVD;
Refer to “Setting Up the Language Features” on page 48.
•
How to have the same subtitle language come up whenever you play a DVD;
Refer to “Setting Up the Language Features” on page 48.
32
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Instant Replay/Skip Function
Changing the Camera Angle
When a DVD contains multiple angles of a particular scene, you can select the Angle
function.
Using the Instant Replay function (DVD)
If you miss a scene, you can see it again using
this function.
Using the ANGLE button
If you press the I.REPLAY button, the current
Press the ANGLE button to see if an ANGLE
1 scene moves backward about 10 seconds,
(
) mark is present at the upper left hand
and plays back.
corner of the screen.
- Depending on the disc, the Instant Replay
function may not work.
When an ANGLE mark is shown, press the
1 ANGLE button, then an ANGLE select icon
will appear at the upper left hand corner of
the screen.
Use the LEFT/RIGHT buttons to select the
2 desired screen angle.
Using the Instant Skip function (DVD)
To turn off the display, press the ANGLE
3 button again.
Use this function to skip playback 10 seconds
ahead of the current scene.
Press the I.SKIP button.
1
- Playback will skip ahead 10 seconds.
- Depending on the disc, this feature may not work.
34
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Bookmark Function
Using the Zoom & 3D Sound Functions
This feature lets you bookmark sections of a DVD or VCD (MENU OFF mode) so you can
quickly find them at a later time.
Using the Zoom Function (DVD)
During play or pause mode, press the ZOOM button
1 on the remote.
Using the Bookmark Function (DVD/VCD)
A zoom mark will be displayed on screen.
During play, press the BOOKMARK button on the
1 remote. The Bookmark icons will be displayed.
ENTER
Use the UP/DOWN or LEFT/RIGHT buttons to select
2 the part of the screen you want to zoom in on.
Use the LEFT/RIGHT buttons to move to the
2 desired bookmark icon.
Press the ENTER button.
3
When you reach the scene you want to mark,
- During DVD play, press ENTER to zoom in 2X/4X/2X/Normal in
order.
3 press the ENTER button. The icon will change to
- During VCD play, press ENTER to zoom in 2X/Normal in order.
a number (1, 2, or 3).
Press the BOOKMARK button to turn off the
4 display.
Using the 3D Sound Function
Recalling a Marked Scene
The simulated surround effect depends on the disc
contents. If you connect the unit to your stereo
system, you can enhance sound quality and
produce a greater surround effect.
This feature is useful when you are using the DVD
player with a two channel stereo through the
analog outputs.
During play, press the BOOKMARK button
Off
1 on the remote.
CLEAR
1
–
–
Use the LEFT/RIGHT buttons to select a
2 marked scene.
(Discs which are recorded with LPCM or DTS will
not work.)
Press the PLAY/PAUSE (
) buttons to skip
3 to the marked scene.
During play, press the 3D button.
NOTE
1 The 3D SOUND mark will be displayed on
NOTE
Clearing a Bookmark
screen.
• 3D Sound is possible only on discs
recorded using DOLBY SURROUND
or DOLBY DIGITAL. However, some
of these discs do not contain rear
channel sound signals.
• Up to three scenes may be marked
at a time.
During play, press the BOOKMARK button
Press the UP/DOWN buttons to turn the
2 3D Sound feature On or Off.
1 on the remote.
• When in VCD 2.0 mode (MENU ON
mode), this function does not work.
Use the LEFT/RIGHT buttons to select the
• Depending on the disc, the Zoom and
3D Sound function may not work.
• Depending on the disc, the
Bookmark function may not work.
2 bookmark number you want to delete.
Press the CLEAR button to delete a
3 bookmark number. Press the BOOKMARK
button to turn off the display.
36
37
Download from Www.Somanuals.com. All Manuals Search And Download.
MP3/WMA Play
MP3/WMA Play
When an MP3/WMA Disc is inserted into the DVD player, the first song file of the first folder
plays.
CD-R MP3/WMA discs
•
If more than two file extensions are present, select the media
of your choice by pressing UP/DOWN, then press the ENTER
button.
When playing CD-R/MP3 or WMA discs, please follow all the recommendations for CD-R
above, plus the comments below:
•
•
To change the currently playing media, press the STOP (
button twice and then press the DISC MENU button.
If no button on the remote controller is pressed for 60 seconds,
the menu will disappear and the selected item will be played.
)
• Your MP3 or WMA files should be ISO 9660 or JOLIET format.
ISO 9660 format and Joliet MP3 or WMA files are compatible with Microsoft's DOS and Windows,
and with Apple's Mac. These two formats are the most widely used.
ENTER
• When naming your MP3 or WMA files do not exceed 8 characters, and place ".mp3, .wma" as
the file extension.
MP3/WMA Play Function
General name format of: Title.mp3. or Title.wma. When composing your title, make sure that you use
8 characters or less, have no spaces in the name, and avoid the use of special characters including:
(.,/,\,=,+).
When the first song file is playing, the music
1 folder menu will appear on the right side of the
• Use a decompression transfer rate of at least 128 Kbps when recording MP3 files.
Sound quality with MP3 files basically depends on the rate of compression/decompression you
choose. Getting audio CD quality sound requires an analog/digital sampling rate, that is conversion to
MP3 format, of at least 128 Kbps and up to 160 Kbps. However, choosing higher rates, like 192 Kbps
or more, only rarely give better sound quality.
screen.
Up to 8 music folders can be displayed at a
time. If you have more than 8 folders on a
disc, press the LEFT/RIGHT buttons to bring
them up on the screen.
ENTER
RETURN
MENU
Conversely, files with decompression rates below 128 Kbps will not be played properly.
• Use a decompression transfer rate of at least 64Kbps when recording WMA files.
Sound quality with WMA files basically depends on the rate of compression/decompression you
choose. Getting audio CD quality sound requires an analog/digital sampling rate, that is conversion to
WMA format, of at least 64Kbps and up to 192Kbps.
Use the UP/DOWN buttons to select the
2 desired music folder, then press ENTER.
Use the UP/DOWN buttons again to select a
song file. Press ENTER to begin playback of
the song file.
Conversely, files with decompression rates below 64Kbps or over 192Kbps will not be played
properly.
• Do not try recording copyright protected MP3 files.
Certain "securized" files are encrypted and code protected to prevent illegal copying. These files are
of the following types: Windows MediaTM (registered trade mark of Microsoft Inc) and SDMITM
(registered trade mark of The SDMI Foundation). You cannot copy such files.
Program/Random playback
PROGRAM
RANDOM
Press the MODE button to switch between the
PROGRAM and RANDOM modes. See page 40
for more information on these modes.
• Important: The above recommendations cannot be taken as a guarantee that the DVD player will
play MP3 recordings, or as an assurance of sound quality.
You should note that certain technologies and methods for MP3 file recording on CD-Rs prevent
optimal playback of these files on your DVD player (degraded sound quality and in some cases,
inability of the player to read the files).
• This unit can play a maximum of 500 files and 300 folders per disc.
NOTE
•
Press the REPEAT button to hear only music continuously and press it once again to release.
• PROGRAM/RANDOM playback cannot be used if the disc contains more than two types of file extensions.
38
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Program Play & Random Play
Picture CD Playback
Open the disc tray.
Program Play (CD/MP3/WMA)
1
Load the disc on the tray.
2 - Load the disc with the labeled side up.
Press the MODE button.
1
PROGRAM
RANDOM
Close the tray.
Use the LEFT/RIGHT buttons to select
2 PROGRAM. Press the ENTER button.
3 - The tray closes and you should get a screen that looks like the
ENTER
one to the right.
•
Select JPEG in the menu to view a Photo CD.
Use the UP/DOWN/LEFT/RIGHT buttons to
3 select the first track to add to the program.
ALBUM
PHOTO: 1 /215
• Use the UP/DOWN or LEFT/RIGHT buttons on the remote controller
to select the picture you want to view and then press the ENTER
Press the ENTER button. The selection
numbers appear in the Program Order box.
button. (Press the PLAY/PAUSE (
in the Slide Show mode.)
) button if you want to play it
PROGRAM 01
• To see the next 6 pictures, press the
button.
Track
Program Order
Press the PLAY/PAUSE (
) button.
- - - - - - - -
- - - - - - - -
- - - - - - - -
- - - - - - - -
- - - - - - - -
01 02 03 04
05 06 07 08
09 10 11 12
13 14 15 16
• To see the previous 6 pictures, press the
button.
4 The disc will be played in programmed order.
ENTER
•
: Return to the Album Screen.
Press the UP/DOWN or LEFT/RIGHT buttons on the remote
controller to display the menu again.
PHOTO: 1 /215
ENTER
RETURN
CLEAR
ENTER RETURN
•
•
•
: Each time the ENTER button is pressed, the picture rotates
90 degrees clockwise.
: Each time the ENTER button is pressed, the picture is
enlarged up to 2X. (Normal ➝ 2X ➝ Normal)
Random Play (CD/MP3/WMA)
: The unit enters slide show mode.
*Press the RETURN button to return to the album screen.
*Before the Slide Show can begin, the picture interval must be set.
Press the MODE button.
PROGRAM
1
RANDOM
ENTER RETURN
TIMER:
•
•
•
:
When this icon is selected and ENTER is pressed, the pictures
change automatically with about an 6 second interval.
Use the LEFT/RIGHT buttons to select
2 RANDOM. Press the ENTER button.
: The pictures change automatically with about an 12 second
interval.
The disc will be played in random order.
: The pictures change automatically with about an
18 second interval.
*Depending on the file size, each interval between images may take
longer or shorter than the manual suggests.
•
•
To change the currently playing media, press the STOP (
If no button on the remote controller is pressed for 60 seconds, the menu will disappear and the selected item
will be played.
) button twice and then press the DISC MENU button.
NOTE
• Depending on the disc, the Program and Random Play functions may not work.
• To resume normal play, press the CLEAR button.
NOTE
• PROGRAM/RANDOM playback cannot be used if the disc contains more than two types of file extensions.
• This unit can support a maximum of 99 programmed order.
• Press the TITLE MENU button to return to the album screen.
• Press the RETURN button to return to the slide show.
• If no buttons on the remote controller pressed for 10 seconds, the menu will disappear.
Press the UP/DOWN or LEFT/RIGHT buttons on the remote controller to display the menu again.
40
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Beginning Karaoke Functions
(DVD-E337K/DVD-E437K/DVD-E537K only)
Picture CD Playback
CD-R JPEG Discs
Operation Sequence
Connect the Mixed Audio Out terminals with
• Only files with the ".jpg" and ".JPG" extensions can be played.
1 the TV or AMP.
• If the disc is not closed, it will take longer to start playing and not all of the recorded files may be
played.
Connect Mic into Mic 1 or Mic 2 jack.
• Only CD-R discs with JPEG files in ISO 9660 or Joliet format can be played.
• The name of the JPEG file may not be longer than 8 characters and should contain no blank spaces
or special characters (. / = +).
2 - When the MIC should be connected, karaoke function
can operate.
• Only a consecutively written multisession disc can be played. If there is a blank segment in the
multisession disc, the disc can be played only up to the blank segment.
• A maximum of 500 images can be stored on a single CD.
• Only Kodak Picture CDs can be played.
• When playing a Kodak Picture CD, only the JPEG files in the pictures folder can be played.
• Picture discs other than Kodak Picture CD may take longer to start playing or may not play at all.
• If a number of files in 1 Disc is over 500, only 500 JPEG file can be played.
• If a number of folders in 1 Disc is over 300, only JPEG files in 300 folders can be played.
Key Control
Press the KARAOKE button.
1
2
Select the "Keycon" using the LEFT/RIGHT
buttons.
By use of the LEFT/RIGHT buttons, change
to the desired tone.
3
: To let 7 scales down by half scale.
ꢀ
: Original scale.
ꢁ
: To let 7 scales up by half scale.
ꢂ
NOTE
• If you hear strange noises(squealing or howling) while using the karaoke feature, move the microphone
away from the speakers. Turning down the microphone volume or the speaker volume is also effective.
• The next music plays if performing SEARCH with SCORE displayed in the Score On MODE for CD or
VCD.
• When playing MP3 disc, MIC & Karaoke functions are not operate.
• When playing LPCM disc, karaoke functions are not operate.
• When the MIC is connected, Digital Out does not work.
42
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Reserving a Song
(DVD-E337K/DVD-E437K/DVD-E537K only)
Vocal Function
(DVD-E337K/DVD-E437K/DVD-E537K only)
It is the function to reserve the desired song in advance by use of Karaoke function.
Sequence of reservation
Pressing the KARAOKE button twice displays the
Sequence of reservation
1 following:
Playback the Karaoke Disc containing the
1 wanted songs.
Vocal Fader
Press the KARAOKE button.
– The function to make the music only sound by cancelling
vocal when playing a Karaoke disc.
2
Select the "Request" using the LEFT/RIGHT
VOCAL FADER
Remark
CH1. Vocal Cancel
CH2. Vocal Cancel
CH1, CH2. Vocal Cancel
Vocal Fader Off
3 buttons.
↓
↓
↓
↓
V1
V2
Input the number (Track No.) of the desired
1 + 2
OFF
4 song into the flickering part(--).
- You can reserve up to 10 songs.
– In VCD, CVD or CD, you can select only the On or Off.
When you want the next reserved song
5 during playing a song, press the SKIP
Guide Melody
button.
– To guide melody through xylophone and piano help you sing
easily.
– This function works only on the DVD Karaoke disc on which
the guide melody is recorded.
Cancellation of reservation
Score Function
Cancel by pressing the CLEAR button of the
1 remote.
Press KARAOKE button twice to turn the Score Mode On.
- Score will pop up whenever a song is completed.
- The last reserved song will be erased first.
Continuous pressing of the CLEAR button
CAUTIONS
2 can cancel the next reserved song.
- Make sure to disconnect MIC to play a movie disc or play in a general mode. If you play a movie disc
with the Score On, a score will show up every time when a chapter is over.
If the reservation is required again, input the
3 song number in the flickering part.
Types of Karaoke disc
• DVD Karaoke Disc
• CVD, VCD Karaoke Disc
NOTE
Karaoke
Karaoke
Channel
5CH. DVD
2CH. DVD
Channel
CVD
VCD, CD
-Channel
-Channel
• When using "SKIP" button, it can not work at the last song.
1 CH
2 CH
3 CH
4 CH
5 CH
L
R
Left stereo music Left stereo music + Vocal
Right stereo music Right stereo music + Vocal
1 CH
1 CH
CH1 LEFT Left stereo music + Vocal
Left stereo music
CH1 RIGHT Right stereo music + Vocal Right stereo music
+ Vocal
• When using Request function, the "DISPLAY" and “REPEAT” function does not work.
M
Guide melody
Vocal track
Vocal track
-
-
-
V1
V2
2 CH
2 CH
CH2 LEFT Left stereo music
CH2 RIGHT Right stereo music
-
-
44
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Setup Menu
Setting Up the Language Features
The Setup menu lets you customize your DVD player by allowing you to select various
language preferences, set up a parental level, even adjust the player to the type of
television screen you have.
If you set the player menu, disc menu, audio and subtitle language in advance,
they will come up automatically every time you watch a movie.
Using the Player Menu Language
e.g) Setting up in English.
With the unit in Stop mode, press the MENU button
DVD
1 on the remote. Select Setup using UP/DOWN
With the unit in Stop mode, press the MENU button.
1
Disc Menu
buttons, then press the RIGHT or ENTER button.
Select Setup using UP/DOWN buttons, then RIGHT
Title Menu
2 or ENTER button.
Language Setup : Setup of the Language.
Function
Setup
Audio Setup : Setup of the Audio Options
Select Language Setup using UP/DOWN buttons,
LANGUAGE SETUP
3 then press the RIGHT or ENTER button.
Display Setup : Setup of the Display Options
Use to select which type of screen you want to
watch and several display options.
Select Player Menu using UP/DOWN buttons, then
4 press the RIGHT or ENTER button.
PLAYER MENU LANGUAGE
Parental Setup : Setup of the Parental Level
Allows users to set the level necessary to
prevent children from viewing unsuitable movies
such as those with violence, adult subject
matter, etc.
Use the UP/DOWN buttons to select ‘English’.
5
6
Player Menu
English
Français
Deutsch
Español
Italiano
Press the ENTER button.
- English is selected and the screen returns to SETUP menu.
- To make the SETUP menu disappear, press the RETURN or
LEFT button.
Nederlands
Use the UP/DOWN buttons on the remote to access
Using the Disc Menu Language
2 the different features.
This function changes the text language only on the disc
menu screens.
Press the ENTER button to access the sub features.
3
e.g) Setting up in English.
With the unit in Stop mode, press the MENU button.
1
DISC MENU LANGUAGE
Disc Menu
Select Setup using UP/DOWN buttons, then RIGHT
2 or ENTER button.
Select Language Setup using UP/DOWN buttons,
Others
To make the setup screen disappear after setting up, press the
MENU button again.
3 then press the RIGHT or ENTER button.
Select Disc Menu using UP/DOWN buttons, then
4 press the RIGHT or ENTER button.
Use the UP/DOWN buttons to select ‘English’.
NOTE
5
6
- Select “Others” if the language you want is not listed.
Depending on the disc, some Setup Menu selections may not work.
Press the ENTER button.
- English is selected and the screen returns to SETUP menu.
46
47
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Up the Language Features
Setting Up the Audio Options
With the unit in Stop mode, press the MENU button.
Using the Audio Language
1
Select Setup using UP/DOWN buttons, then RIGHT
2 or ENTER button.
With the unit in Stop mode, press the MENU button.
1
AUDIO LANGUAGE
Select Setup using UP/DOWN buttons, then RIGHT
2 or ENTER button.
Audio
Select Audio Setup using UP/DOWN buttons, then
3 press the RIGHT or ENTER button.
Select Language Setup using UP/DOWN buttons,
Original
Others
3 then press the RIGHT or ENTER button.
Use the UP/DOWN buttons to select the desired
4 item. Then press the RIGHT or ENTER button.
AUDIO SETUP
PCM
Select Audio using UP/DOWN buttons, then press
Dolby Digital Out
MPEG-2 Digital Out
DTS
:
:
:
4 the RIGHT or ENTER button.
PCM
Off
Dolby Digital Out
1. PCM :
Dynamic Compression : On
Converts to PCM(2CH) audio.
Select PCM when using the Analog Audio Outputs.
2. Bitstream :
Converts to Dolby Digital Bitstream (5.1CH).
Select Bitstream when using the Digital Audio Output.
PCM Down Sampling
Multi Channel Output
Speaker Setup
: On
Press the UP/DOWN buttons to select ‘English’ .
5
: Digital
- Select “Original” if you want the default soundtrack language to
be the original language the disc is recorded in.
- Select “Others” if the language you want is not listed.
• Be sure to select the correct Digital Output
or no audio will be heard.
NOTE
Press the ENTER button.
MPEG-2 Digital Out
1. PCM :
Converts to PCM(2CH) audio.
Select PCM when using the Analog
Audio Outputs.
2. Bitstream :
Converts to MPEG-2 Digital Bitstream
(5.1CH or 7.1CH).
6 - English is selected and the screen returns to SETUP menu.
• When Multi Channel Output select Digital.
Dolby&MPEG-2 Digital Out works.
DTS
Using the Subtitle Language
1. Off : Doesn’t output digital signal.
2. On : Outputs DTS Bitstream via digital output only.
Select DTS when connecting to a DTS Decoder.
With the unit in Stop mode, press the MENU button.
1
SUBTITLE LANGUAGE
Automatic
Dynamic Compression
1. On : To select dynamic compression.
2. Off : To select the standard range.
Select Setup using UP/DOWN buttons, then RIGHT
Select Bitstream when using the
Digital Audio Output.
2 or ENTER button.
Subtitle
PCM Down Sampling
Select Language Setup using UP/DOWN buttons,
1. On : Select this when the amplifier connected to the player is not 96KHz compatible.
In this case, the 96KHz signals will be down converted to 48KHZ.
2. Off : Select this when the amplifier connected to the player is 96KHz compatible.
In this case, all signals will be output without any changes.
Others
3
then press the RIGHT or ENTER button.
Select Subtitle using UP/DOWN buttons, then press
4 the RIGHT or ENTER button.
Multi Channel Output (DVD-E537K only)
1. Digital : Select this when using the multichannel digital audio output.
2. Analog : Select this when using the multichannel analog audio output.
Use the UP/DOWN buttons to select ‘English’.
- Select “Automatic” if you want the subtitle language to be the
same as the language selected as the audio preference.
- Select “Others” if the language you want is not listed.
Some discs may not contain the language you select as
your initial language; in that case the disc will use its
original language setting.
NOTE
5
Speaker Setup (DVD-E537K only)
• If the selected language is not
recorded on the disc, the original
pre-recorded language is selected.
NOTE
•
Howto make the SETUP menu
return to menu screen
during set up; Press RETURN or
•
How to make the SETUP menu disappear or return to menu screen during set up;
disappear or
Press RETURN or LEFT button.
• Manufactured under license from Dolby Laboratories.
“Dolby” and the double-D symbol are trademarks of Dolby Laboratories.
Press the ENTER button.
- English is selected and the screen returns to SETUP menu.
LEFT button.
6
• “DTS” and “DTS Digital Out” are trademarks of Digital Theater Systems, Inc.
48
49
Download from Www.Somanuals.com. All Manuals Search And Download.
Surround Sound Speaker Setup (DVD-E537K only)
Setting Up the Display Options
With the unit in Stop mode, press the MENU button.
With the unit in Stop mode, press the MENU button.
1
1
Select Setup using UP/DOWN buttons,
Select Setup using UP/DOWN buttons, then RIGHT
2 or ENTER button.
Select Display Setup using UP/DOWN buttons,
3 then press the RIGHT or ENTER button.
Use the UP/DOWN buttons to select the desired
4 item. Then press the RIGHT or ENTER button.
2 then RIGHT or ENTER button.
Select Audio Setup using UP/DOWN buttons,
3 then press the RIGHT or ENTER button.
Select Multi Channel Output using UP/DOWN
4 buttons. Then select Analog pressing the RIGHT
or ENTER button.
AUDIO SETUP
DISPLAY SETUP
4:3 L - Box
Use the UP/DOWN buttons to select Speaker Setup.
Dolby Digital Out
MPEG-2 Digital Out
DTS
:
:
:
PCM
PCM
Off
TV Aspect
:
:
:
:
:
:
5 Then press the RIGHT or ENTER button.
Still Mode
Auto
TV Aspect
Screen Massages
Front Display
Black Level
On
Use the UP/DOWN or LEFT/RIGHT buttons to select
Dynamic Compression : On
Auto Dim
Off
PCM Down Sampling
Multi Channel Output
Speaker Setup
: On
6 the desired item. Then press the ENTER button.
: Analog
Still Mode
NTSC Disc Output
PAL 60 Hz
The default settings : FRONT L, R(Large), CENTER(None),
SURROUND (None)
Screen Messages
Front Display
Black Level
Select the size of the speakers to be connected.
• Front(FL, FR)
- Large: Normally select this.
- Small: When the sound cracks or the surround sound effects are
difficult to hear, select this. This activates the Dolby Digital bass
redirection circuitry and outputs the bass frequencies of the
speaker from the subwoofer.
AUDIO SETUP
PCM
TV ASPECT
Dolby Digital Out
MPEG-2 Digital Out
DTS
:
:
:
PCM
Off
4:3 Letter Box
4:3 Pan Scan
16:9 Wide
Dynamic Compression : On
PCM Down Sampling
Multi Channel Output
Speaker Setup
: On
: Analog
NTSC Disc Output
• Center
- None: If you do not connect a center speaker, select this.
- Large: Normally select this.
- Small: When the sound cracks, select this. This activates the
Dolby Digital bass redirection circuitry and outputs the bass
frequencies of the center speaker from other speakers.
• Surround (SL, SR)
- None: If you do not connect a center speaker, select this.
- Large (Rear/Side): Normally select either of these according to
the rear speaker’s position.
- Small (Rear/Side): When the sound cracks or the surround
sound effects are difficult to hear, select either of these according
to the rear speaker’s position. This activates the Dolby Digital
bass redirection circuitry and outputs the bass frequencies of the
rear speaker from other speakers.
NOTE
NOTE
•
How to make the SETUP menu
disappear or return to menu screen
during set up.
Setting up TEST
•
How to make the SETUP menu disappear or return to menu screen during set up;
Press the RETURN or LEFT button.
The test output signals come clockwise starting from the Front
Speaker(L). Adjust Channel Balance to match to the volume of test
signals memorized in the system.
Press RETURN or LEFT button.
• The subwoofer test output signal is
lower than the other speakers.
• The MPEG Multichannel logo is a
trademark registered by PHILIPS
Corporation.
FRONT(L)
CENTER
SUBWOOFER
SURROUND(L)
FRONT(R)
SURROUND(R)
50
51
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Up the Parental Control
Setting Up the Display Options
The Parental Control function works in conjunction with DVDs that have been assigned
a rating - which helps you control the types of DVDs that your family watches.
There are up to 8 rating levels on a disc.
TV Aspect
Depending on the type of television you have, you may want to adjust the screen
setting (aspect ratio).
1. 4:3 Letter Box :
Select when you want to see the total 16:9 ratio screen DVD supplies, even
though you have a TV with a 4:3 ratio screen.
Black bars will appear at the top and bottom of the screen.
2. 4:3 Pan Scan :
Select this for conventional size TVs when you want to see the central portion of
the 16:9 screen. (Extreme left and right side of movie picture will be cut off.)
3. 16:9 Wide :
With the unit in Stop mode, press the MENU button.
1
Select Setup using UP/DOWN buttons, then RIGHT
2 or ENTER button.
Select Parental Setup using UP/DOWN buttons,
3 then press the RIGHT or ENTER button.
PARENTAL SETUP
Use RIGHT or ENTER to select Yes if you want to
4 use a password. The Enter Password screen
Use Password
:
No
You can view the full 16:9 picture on your widescreen TV.
appears.
Still Mode
Enter your password. The Re-enter Password
These options will help prevent picture shake in still mode and display small text
clearer.
1. Auto : When selecting Auto, Field/Frame mode will be automatically converted.
2. Field : Select this feature when the screen shakes in the Auto mode.
3. Frame : Select this feature when you want to see small letters more clearly in the
Auto mode.
5 screen appears to confirm the password.
ENTER
RETURN
MENU
Enter your password again.
The Parental Control screen appears.
CREATE PASSWORD
About the Rating Level ;
Enter Password
The Rating Level will work only when Use Password
is set to Yes. To unlock the player, use UP/DOWN to
select No. Use RIGHT or ENTER to select Rating
-
-
-
-
Screen Messages
Use to turn on-screen messages On or Off.
RETURN
0 ~ 9
Level. Press ENTER.
- Use UP/DOWN to select the level (e.g. Level 6) and press
ENTER. Discs that contain Level 7 will now not play.
- To cancel the rating level, use RIGHT or ENTER to select No in
Front Display
PARENTAL SETUP
Adjust the brightness of the unit’s front panel display.
1. Auto Dim : Makes the Front Panel Display dim automatically when playing a DVD.
2. Bright : Makes the Front Panel Display bright.
3. Dim : Makes the Front Panel Display dim.
Use Password.
About the Change Password ;
- Use UP/DOWN to select Change Password.
Press ENTER. The Change Password screen appears.
- Enter your new password. Re-enter the new password again.
Black Level
Adjusts the brightness of the screen.(On/Off)
e.g) Setting up in LEVEL6.
NTSC Disc Output
“NTSC” if the screen only has one NTSC-video entrance.
If this is not the case, you can choose to leave “ PAL 60Hz” as is.
RATING LEVEL
NOTE
Level 8 Adult
Level 7
•
How to make the SETUP menu disappear or return to
menu screen during set up;
Level 6
Level 5
Level 4
Press RETURN or LEFT button.
• If you have forgotten your password, see Forget Password in
the Troubleshooting Guide.
Level 3
Level 2
Level 1 Kids Safe
52
53
Download from Www.Somanuals.com. All Manuals Search And Download.
Controlling a TV with the Remote (DVD-E537K only)
Troubleshooting
The remote can also be set up to control most TVs. To program the remote, use the
code that corresponds to your brand.
Before requesting service (troubleshooting), please check the following.
Action
Problem
Page
TV Codes
•
•
•
Check the batteries in the remote. May need replacing.
Operate the remote control at a distance of no more than 20 feet.
Remove batteries and hold down one or more buttons for several
minutes to drain the microprocessor inside the remote to reset it.
Reinstall batteries and try remote again.
CODE
01
02
BRAND
CODE
19
20
BRAND
No operations can be
performed with remote.
SAMSUNG_4
TOSHIBA
P4
SAMSUNG_6, LG, LOEWE, PHILIPS,
FINLUX, YOKO, LOEWE OPTA,
MITSUBISHI, PHONOLA, RADIOLA,
SCHNEIDER
PHILIPS, PHONOLA, RADIOLA
TOSHIBA, GRUNDIG, CGE,
IMPERIAL, MIVAR
21
•
•
Ensure that the disc is installed with the label side facing up.
Check the region number of the DVD.
Disc does not play.
P7
22
PHILIPS, SABA, BANG&OLUFSEN,
BRIONVEGA, FINLUX,
FORMENTI, LOEWE OPTA, METZ,
WEGA, PHONOLA, RADIOMARELLI,
SINGER, SINUDYNE
NOKIA, PANASONIC, SABA, PIONEER,
REZ, SELECO, SALORA
HITACHI, NORDMENDE, PANASONIC,
SABA,TELEFUNKEN, THOMSON,
CONTINENTAL, EDISON
PANASONIC_2
03
04
05
06
07
08
09
10
11
12
13
14
SAMSUNG_1
SAMSUNG_2
SAMSUNG_3
SAMSUNG_5
TOSHIBA
PANASONIC_4
5.1 channel sound is not
being reproduced.
•
5.1 channel sound is reproduced only when the following conditions
are met. :
1) The DVD player is connected with the proper amplifier
2) The disc is recorded with 5.1 channel sound.
Check whether the disc being played has the “Dolby 5.1 ch” mark
on the outside.
P20
•
23
24
• Check if your audio system is connected and working properly.
• In a SETUP Menu, is the Audio Output set to Bitstream?
P49~50
GRUNDIG, BLAUPUNKT, SIEMENS
SHARP
The
icon appears on
• The features or action cannot be completed at this time because:
1. The DVD’s software restricts it.
HITACHI
screen.
SANYO, AKAI, FISHER
HITACHI, SABA, THOMSON, NORDMENDE
HITACHI, NORDMENDE, SABA,
TELEFUNKEN, THOMSON, BRANDT,
FERGUSON, PIONEER, TELEAVA
SONY
TOSHIBA, SANYO, SHARP, SONY,
MITSUBISHI
TOSHIBA, GRUNDIG, FINLUX
TOSHIBA
25
26
27
28
29
30
31
32
33
34
2. The DVD’s software doesn’t support the feature (e.g., angles).
3. The feature is not available at the moment.
4. You’ve requested a title or chapter number or search time that is
out of range.
P23
PANASONIC_3
PANASONIC_6
TELEFUNKEN
MIVAL
LG_2
SHARP_2
JVC
Disc Menu doesn’t appear.
•
•
Check if the disc has a Menu.
P46~47
P46~54
15
16
Play mode differs from the
Setup Menu selection.
Some of the functions selected in the Setup Menu may not work
properly if the disc is not encoded with the corresponding function.
The screen ratio cannot
be changed.
17
18
THOMSON ASIA
THOMSON ASIA
•
•
The Screen Ratio is fixed on your DVDs.
P51~52
P49~50
Make sure you have selected the correct Digital Output in the Audio
Options Menu.
No audio.
Turn on the TV.
If the TV turns off, setup is complete.
1
2
4
•
Press power on from a cold start with no disc in the unit. Press the
Forgot password
STOP (
) and PLAY (
) buttons simultaneously on the front panel
Enter other codes of the same brand
if the first code does not work.
for three seconds. The Select Menu Language display will appear.
Select the desired language button. Press the MENU button on the
remote control to select the Parental Mode. The Parental Mode is now
unlocked as indicated on the display. Press the DOWN button to select
Parental. Press ENTER and the Create Password display will appear.
You can now set your rating level and change your password to a new
number.
Point the DVD’s remote at the TV.
P53
To operate the TV, use the “TV Function
While holding the TV POWER button
3 down, enter the code for your brand.
5 Buttons” described on page 19.
•
•
Go to the contents and find the section of the instruction book that
contains the explanations regarding the current problem, and follow
the procedure once again.
If the problem still cannot be solved, please contact your nearest
authorized service center.
If you experience other
problems.
NOTE
e.g) For SAMSUNG 4 TVs
While holding down the TV POWER button,
enter 0 and then 1.
The remote may not be able to control every
model TV of the brands listed.
54
55
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
MEMO
Power Requirements
AC 110~240V, 50/60 Hz
General
Power Consumption
Weight
12 W
2.4 Kg
Dimensions
430mm (W) X 240mm (D) X 60mm (H)
+5°C to +35°C
Operating Temperature Range
Operating Humidity Range
DVD
10 % to 75 %
Reading Speed : 3.49 m/sec.
Approx. Play Time
(DIGITAL VERSATILE DISC)
Disc
(Single Sided, Single Layer Disc) : 135 min.
Reading Speed : 1.2 to 1.4 m/sec.
Maximum Play Time : 74 min.
Reading Speed : 1.2 to 1.4 m/sec.
Maximum Play Time : 20 min.
Reading Speed : 1.2 to 1.4 m/sec.
Maximum Play Time : 74 min. (Video + Audio)
1 channel : 1.0 Vp-p (75 Ω load)
CD : 12Cm
(COMPACT DISC)
CD : 8Cm
(COMPACT DISC)
VCD : 12Cm
Composite Video
Component Video
Video
Output
Y : 1.0 Vp-p (75 Ω load)
Pr : 0.70 Vp-p (75 Ω load)
Pb : 0.70 Vp-p (75 Ω load)
Luminance Signal : 1.0 Vp-p (75 Ω load)
S-VIDEO
2 channel
Chrominance Signal : 0.286 Vp-p (75 Ω load)
L(1/L), R(2/R)
48 kHz Sampling : 4 Hz to 22 kHz
*Frequency Response
96 kHz Sampling : 4 Hz to 44 kHz
110 dB (DVD-E137A/DVD-1010/DVD-E137B/DVD-E237)
105 dB (Karaoke off Mode DVD-E337K/DVD-E437K/DVD-E537K)
100 dB (DVD-E137A/DVD-1010/DVD-E137B/DVD-E237)
96 dB (Karaoke off Mode DVD-E337K/DVD-E437K/DVD-E537K)
0.004 % (DVD-E137A/DVD-1010/DVD-E137B/DVD-E237)
0.004 % (Karaoke off Mode DVD-E337K/DVD-E437K/DVD-E537K)
*S/N Ratio
Audio
Output
*Dynamic Range
*Total Harmonic Distortion
*: Nominal specification
• Samsung Electronics Co., Ltd reserves the right to change the specifications without notice.
• Weight and dimensions are approximate.
56
Download from Www.Somanuals.com. All Manuals Search And Download.
|