DVD PLAYER
DVD-E139
DVD-P239
AK68-00141N
ENG
Download from Www.Somanuals.com. All Manuals Search And Download.
Precautions
Before You Start
CAUTION
THIS PRODUCT UTILIZES A LASER. USE OF CONTROLS OR ADJUSTMENTS OR
PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN
HAZARDOUS RADIATION EXPOSURE. DO NOT OPEN COVER AND DO NOT REPAIR YOURSELF.
REFER SERVICING TO QUALIFIED PERSONNEL.
Accessories
Note:
• This unit can be used only where the power supply is AC 110~240V, 50/60Hz.
It cannot be used elsewhere.
• This DVD player is designed and manufactured to respond to the Region Management Information.
If the Region number of a DVD disc does not correspond to the Region number of this DVD player,
the DVD player cannot play the disc.
Batteries for
• This device is protected by U.S. patent numbers 4,631,603, 4,577,216, 4,819,098 and 4,907,093 and
other intellectual property rights. The use of Macrovision’s copy protection technology in the device
must be authorized by Macrovision and is intended for home and other limited pay-per-view uses
only, unless otherwise authorized in writing by Macrovision.
Remote Control (AA Size)
Remote Control
Reverse engineering or disassembly is prohibited.
Handling Cautions
• Before connecting other components to this player, be sure to turn them all off.
• Do not move the player while a disc is being played, or the disc may be scratched or broken, and the
player’s internal parts may be damaged.
User’s Manual
Video/Audio Cable
• Do not put a flower vase filled with water or any small metal objects on the player.
• Be careful not to put your hand into the disc tray.
• Do not place anything other than the disc in the disc tray.
• Exterior interference such as lightning and static electricity can affect normal operation of this player. If this
occurs, turn the player off and on again with the POWER button, or disconnect and then reconnect the
AC power cord to the AC power outlet. The player will operate normally.
• Be sure to remove the disc and turn off the player after use.
If remote doesn’t operate
properly:
Install Batteries in the
Remote
• Disconnect the AC power cord from the AC outlet when you don’t intend to use the player for long
periods of time.
• Clean the disc by wiping in a straight line from the inside to the outside of the disc.
Open the battery cover on the back of
• Check the polarity + - of the
batteries (Dry-Cell)
1 the remote.
Insert two AA batteries. Make sure that
• Check if the batteries are drained.
2 the polarities (+ and -) are aligned
Disc Storage
correctly.
• Check if remote sensor is blocked
Be careful not to harm the disc because the data on these discs is highly vulnerable to the environment.
• Do not keep under direct sunlight.
• Keep in a cool ventilated area.
• Store vertically.
by obstacles.
Replace the battery cover.
3
• Check if there is any fluorescent
• Keep in a clean protection jacket.
lighting nearby.
Maintenance of Cabinet
For safety reasons, be sure to disconnect the AC power cord from the AC outlet.
• Do not use benzene, thinner, or other solvents for cleaning.
• Wipe the cabinet with a soft cloth.
4
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of contents
General Features
Setup
Excellent Sound
Easy View
General Features ........................................................................................................7
Disc Type and Characteristics
Description-Front Panel
Description-Rear Panel
Tour of the Remote Control
Dolby Digital, a technology developed by
Dolby Laboratories, provides crystal clear
sound reproduction.
Easy View can convert Letter Box images to
full screen viewing on your conventional TV.
......................................................................................
8
................................................................................................
9
10
12
..............................................................................................
Digital Photo Viewer (JPEG)
You can view Digital Photos on your TV.
........................................................................................
Screen
Both regular and widescreen(16:9) pictures
can be viewed.
Repeat
Connections
Choosing a Connection
You can repeat a song or movie simply by
pressing the REPEAT button.
..............................................................................................
14
Slow Motion
An important scene can be viewed in slow
motion.
MP3/WMA
This unit can play discs created from
MP3/WMA files.
Basic Functions
............................................................................................................
Playing a Disc
17
19
20
..........................................................................
........................................................................................
Using the Search & Skip Functions
Programmed Play
Instant Replay
Using the Display Function
You can program tracks to play in desired
order. (CD, WMA, MP3)
This function is used to replay the previous
10 seconds of the movie from the current
position.
Using the Disc and Title Menu ..................................................................................21
Using the Function Menu ..........................................................................................22
................................................................................................................
Repeat Play
23
Parental Control
Instant Skip
This function skips playback ahead 10
seconds.
The parental control allows users to set the
level necessary to prohibit children from
viewing harmful movies such as those with
violence, adult subject matter, etc.
Advanced Functions
Adjusting the Aspect Ratio (EZ View)
........................................................................
24
26
27
28
29
30
31
32
33
35
36
........................................................................................................
Slow Repeat play
....................................................................................
................................................................................
......................................................................................
....................................................................
....................................................................................
Selecting the Audio Language
Selecting the Subtitle Language
Changing the Camera Angle
Using the Instant Replay/Skip Function
Using the Bookmark Function
NOTE
Various On-Screen Menu Functions
You can select various languages
(Audio/Subtitle) and screen angles while
enjoying movies.
* Discs which cannot be played with this player.
• DVD-ROM
• CD-ROM
• CDI
• DVD-RAM
• CDV
..........................................................................
Using the Zoom & 3D Sound Functions
• HD layer of super Audio CD
• CDGs play audio only, not graphics.
..........................................................................................................
....................................................................................
Progressive Scan (DVD-P239 only)
Progressive scanning creates an improved
picture with double the scan lines of a
conventional interlaced picture.
MP3/WMA Play
Program Play & Random Play
*
Ability to play back may depend on recording conditions.
..................................................................................................
Picture CD Playback
• DVD-R, +R
• CD-RW
• DVD+RW, -RW
Changing Setup menu
................................................................................................
Using the Setup Menu
38
39
41
42
43
............................................................................
Setting Up the Language Features
COPY PROTECTION
....................................................................................
..................................................................................
..................................................................................
Setting Up the Audio Options
Setting Up the Display Options
Setting Up the Parental Control
• Many DVD discs are encoded with copy protection. Because of this, you should only connect your
DVD player directly to your TV, not to a VCR. Connecting to a VCR results in a distorted picture from
copy-protected DVD discs.
Reference
Troubleshooting
Specifications
• This product incorporates copyright protection technology that is protected by methods claims of certain U.S.
patents and other intellectual property rights owned by Macrovision Corporation and other rights owners.
Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended
for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation.
Reverse engineering or disassembly is prohibited.
..........................................................................................................
..............................................................................................................
44
45
6
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Disc Type and Characteristics
Description-Front Panel
This DVD player is capable of playing the following types of discs with the
corresponding logos:
Disc Types
(Logos)
Recording
Types
Max.
Playing Time
Disc Size
Characteristics
Single-sided
240 min.
Double-sided
480 min.
• DVD contains excellent
sound and video due to
Dolby Digital and MPEG-2
system.
• Various screen and audio
functions can be easily
selected through the on-
screen menu.
DVD
5"
1
3
4 5 6 7
8
2
Audio
+
Video
Front Panel Controls
Single-sided
80 min.
Double-sided
160 min.
31/2"
5"
1. STANDBY / ON
5. PLAY/PAUSE (
)
• When the unit is first plugged in, the indicator
lights. When STANDBY/ON is pressed on again,
the light goes out and the player is turned on.
• Begin or pause disc play.
6. STOP (
)
AUDIO-CD
• CD is recorded as a
Digital Signal with better
audio quality, less
distortion and less
deterioration of audio
quality over time.
• Stops disc play.
74 min.
20 min.
2. DISC TRAY
• Load the disc here.
7. SKIP (
/
)
Audio
• Use to skip or search a scene or music.
3. DISPLAY
• Operation indicators are displayed here.
8. EZ VIEW
31/2"
• Easy View can convert Letter Box images to full
screen viewing on your conventional TV.
4. OPEN/CLOSE
• Press to open and close the disc tray.
Disc Markings
~
STEREO
NTSC
• NTSC broadcast system
in U.S.A, Canada,
1
• Play Region Number
• Dolby Digital disc
• Stereo disc
Korea, Japan, etc.
DIGITAL
SOUND
3
2
• Digital Audio disc
• DTS disc
• MP3 disc
Front Panel Display
1. Disc type indicators
Play Region Numbe
r
2. Play / Pause / Forward play
Both the DVD player and the discs are coded by region. These regional codes must match in order for the
disc to play. If the codes do not match, the disc will not play.
3. Displays various messages concerning operations such as PLAY, STOP, LOAD ...
no DISC : No disc loaded.
The Region Number for this player is described on the rear panel of the player.
OPEN : The disc tray is open.
LOAD : Player is loading disc information.
8
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Description-Rear Panel
Description-Rear Panel
DVD-P239
DVD-E139
2
2
1
3
4
5
6
1
3
4
5
6
Rear Panel
Rear Panel
1. DIGITAL AUDIO OUT JACKS
1. DIGITAL AUDIO OUT JACKS
• Use either an optical or coaxial digital cable to connect to a compatible Dolby Digital receiver.
• Use either an optical or coaxial digital cable to connect to a compatible Dolby Digital receiver.
Use to connect to an A/V Amplifier that contains a Dolby Digital or DTS decoder.
Use to connect to an A/V Amplifier that contains a Dolby Digital or DTS decoder.
2. ANALOG AUDIO OUT JACKS
2. ANALOG AUDIO OUT JACKS
• Connect to the Audio input jacks of your television, audio/video receiver.
• Connect to the Audio input jacks of your television, audio/video receiver.
3. VIDEO OUT JACK
3. VIDEO OUT JACK
• Use a video cable to connect to the Video input jack on your television.
• The VIDEO OUT SELECT switch must be set to the 525i(480i) or S-VIDEO position.
• Use a video cable to connect to the Video input jack on your television.
4. S-VIDEO OUT JACK
4. S-VIDEO OUT JACK
• Use the S-Video cable to connect this jack to the S-Video jack on your television for a higher quality
picture. The S-VIDEO must be selected in the VIDEO OUT SELECT.
•
Use the S-Video cable to connect this jack to the S-Video jack on your television for a higher quality picture.
• The VIDEO OUT SELECT switch must be set to the S-VIDEO position.
5. COMPONENT VIDEO OUT JACKS
5. COMPONENT VIDEO OUT JACKS
• Use these jacks if you have a TV with Component Video in jacks. These jacks provide Pr, Pb and Y
video. Along with S-Video, Component Video provides the best picture quality.
The COMPONENT must be selected in the VIDEO OUT SELECT.
• Use these jacks if you have a TV with Component Video in jacks. These jacks provide Pr, Pb and Y
video. Along with S-Video, Component Video provides the best picture quality.
• If 525P(480P) VIDEO is selected, progressive scan mode will work.
• If 525i(480i) VIDEO is selected, interlaced scan mode will work.
6. VIDEO OUT SELECT SWITCH
• Use the switch to set video out. If COMPONENT is selected, S-video may not work.
If S-Video is selected, COMPONENT may not work.
6. VIDEO OUT SELECT SWITCH
• Use this switch to set video out.
• If 525P(480P) VIDEO is selected, VIDEO and S-VIDEO will not work.
Important Note
NOTE
• Consult your TV User’s Manual to find out if your TV supports Progressive Scan.
If Progressive Scan is supported, follow the TV User’s Manual’s instructions regarding
Progressive Scan settings in the TV’s menu system.
* Select the VIDEO OUT SELECT switch in the Stop or Power Off mode.
• If 525P(480P) VIDEO OUT is selected, VIDEO and S-VIDEO will not work.
• Select the VIDEO OUT SELECT switch in the Stop or Power Off mode.
10
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Tour of the Remote Control
Tour of the Remote Control
DVD Function Buttons
1. DVD POWER Button
• Turns the power on or off.
16. PLAY/PAUSE Button (
)
1
2
13
• Begin/Pause disc play.
2. NUMBER Buttons
17. SKIP Buttons (
/
)
• Use to skip the title, chapter, or track.
3. STEP Button
18. RETURN Button
• Advances play one frame at a time.
• Returns to a previous menu.
4. I.REPLAY Button
19. INFO Button
• This function is used to replay the previous 10
seconds of the movie from the current position.
• Displays the current disc mode.
14
15
5. EZ VIEW Button
• Easy View can convert Letter Box images to full
20. ENTER/DIRECTION Button
3
4
(UP/DOWN or LEFT/RIGHT Buttons)
• This button functions as a toggle switch.
screen viewing on your conventional TV.
5
6
7
6. SEARCH Buttons (
• Allows you to search forward/backward through a
/
)
21. ANGLE Button
• Use to access various camera angles on a DVD.
disc.
22. MODE Button
16
17
18
7. STOP Button (
)
• Allows you to program a specific order.
8. DISC MENU Button
• Brings up the Disc menu.
23. SUBTITLE Button
8
9
24. AUDIO Button
9. TITLE MENU Button
• Brings up the Title menu.
19
20
• Use this button to access various audio functions
on a disc.
10. CLEAR Button
25. REPEAT A-B Button
• Use to mark a segment to repeat between
A and B.
• Use to remove menus or status displays from the
screen.
11. BOOKMARK Button
26. REPEAT Button
• Allows you to repeat play a title, chapter, track, or
disc.
12. MENU Button
21
• Brings up the DVD player’s setup menu.
27. ZOOM Button
22
23
24
10
13. OPEN/CLOSE Button
• Enlarges the DVD picture.
• To open and close the disc tray.
14. 3D Button
11
12
15. I.SKIP Button
25
26
27
• This function skips playback ahead 10 seconds.
12
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Choosing a Connection
Choosing a Connection (DVD-P239 only)
The following show examples of connections commonly used to connect the DVD player
with a TV and other components.
Connection to a TV (For Video)
TV (Normal, Widescreen, Projection, etc..)
Before Connecting the DVD Player
Method 1
Method 2
Method 3
Method 4
• Always turn off the DVD player, TV, and other components before
you connect or disconnect any cables.
Good
picture
Better
picture
Best
picture
Optimum
picture
Basic Audio
• Refer to the owner’s manual of the additional components you are
connecting for more information on those particular components.
TV
Video
Cables
S-Video
Cable
Connection to an Audio System
AV Cable
OR
OR
Method 1
Method 2
DVD
PLAYER
AUDIO
SYSTEM
Audio Output Jacks
Video Output Jack
S-Video Jack
Component Video Jacks Component Video Jacks
Dolby Digital Decoder
Digital Audio Input Jack
2ch Amplifier
Audio Input Jacks
DVD Player + TV with Video Input Jack
(The VIDEO OUT SELECT switch must be set to the S-VIDEO position.)
Method 1
Method 2
Method 3
Method 4
DVD Player + TV with S-Video Input Jack
(The VIDEO OUT SELECT switch must be set to the S-VIDEO position.)
DVD Player + TV with Component Video Jacks
(The VIDEO OUT SELECT switch must be set to the 525i(480i) position.)
DVD Player + TV with Progressive Scan Jacks.
OR
(The VIDEO OUT SELECT switch must be set to the 525P(480P) position).
• If 525P(480P) VIDEO OUT is selected, VIDEO and S-VIDEO will not work.
• Depending on your TV, your hookup for Method 4 may differ from the illustration.
Important Note
DVD
PLAYER
Consult your TV User’s Manual to find out if your TV supports Progressive Scan.
If Progressive Scan is supported, follow the TV User’s Manual’s instructions regarding Progressive
Scan settings in the TV’s menu system.
Digital Audio Out
Analog Audio Out
14
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Choosing a Connection (DVD-E139 only)
Playing a Disc
Connection to a TV (For Video)
Before Play
• Turn on your TV and press the TV/VIDEO button to select the video
mode.
TV (Normal, Widescreen, Projection, etc..)
SELECT MENU LANGUAGE
• Turn on your Audio System and select AUX, CD or DVD.
Method 3
Method 1
Method 2
After plugging in the player, the first time you press the DVD
POWER button, this screen comes up :
If you want to select the language, press a NUMBER button.
(This screen will only appear the very first time you plug in the player.)
Good
picture
Better
picture
Best
picture
Basic Audio
TV
S-Video
Cable
Video
Cable
AV Cable
Play
Press the OPEN/CLOSE button.
1 The STANDBY indicator light goes out and the tray opens.
OR
OR
Place a disc gently into the tray with the disc’s label
2 facing up.
Press the PLAY/PAUSE (
) button or OPEN/CLOSE
DVD
PLAYER
3 button to close the disc tray.
Stopping Play
4 Press the STOP (
) button during play.
Audio Output
Jacks
Video Output
Jack
S-Video Jack
Component Video
Jack
Removing Disc
5 Press the OPEN/CLOSE button.
DVD Player + TV with Video Input Jack
DVD Player + TV with S-Video Input Jack
Method 1
Method 2
Pausing Play
6 Press the PLAY/PAUSE (
(If S-Video is selected in the VIDEO OUT SELECT.)
) or STEP button on the remote during play.
) button once again.
- Screen stops, no sound.
DVD Player + TV with Component Video Jack
(If COMPONENT is selected in the VIDEO OUT SELECT.)
Method 3
- To resume again, press PLAY/PAUSE (
NOTE
• If COMPONENT is selected, S-Video will not work.
• If S-Video is selected, COMPONENT will not work.
16
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing a Disc
Using the Search & Skip Functions
During play, you can search quickly through a chapter or track or use the skip
function to jump to the next selection.
Step Motion Play (Only DVD)
7 Press the STEP button on the remote during play.
- Each time the button is pressed, a new frame will appear.
- No sound is heard during STEP mode.
- Press PLAY/PAUSE (
) to resume normal play.
(You can only perform step motion play in the forward direction.)
Searching through a Chapter or Track
Slow Motion Play (Only DVD)
8 Press the
During play, press the
or
button
button on the remote during PAUSE or STEP mode.
button, you can select slow motion play for 1/8, 1/4 or 1/2 of normal speed.
- No sound is heard during slow mode.
- Press PLAY/PAUSE ( ) to resume normal play.
1 on the remote.
- By pressing the
• Press the
or
button on the remote and press again to search at a faster
- When playing a DVD, reverse slow motion play will not work.
speed on the DVD, CD.
DVD 2X, 4X, 8X, 16X, 32X, 128X
CD 2X, 4X, 8X
RESUME function
Skipping Tracks
When you stop disc play, the player remembers where you stopped, so when you press PLAY (
) again,
it will pick up where you left off. (unless the disc is removed, the STOP (
player is unplugged.)
) button is pressed twice or the
During play, press the
or
button.
1
• When playing a DVD, if you press the
button, it moves to the next chapter.
If you press the
button, it moves to the beginning of the chapter.
One more press makes it move to the beginning of the previous chapter.
NOTE
• When playing a CD, if you press the
If you press the button, it moves to the beginning of the track.
One more press makes it move to the beginning of the previous track.
button, it moves to next track.
• If the player is left for 5 minutes in pause mode, it will stop.
• If the player is left in the stop mode for more than 30 minutes, the power will automatically shut off.
(Automatic Power-Off Function)
• If the player is left in the stop mode for more than one minute without any user interaction, a screen
saver will be activated, and the TV screen will fade in and out repeatedly. Press the PLAY (
button to resume normal play.
)
• This
icon indicates an invalid button press.
18
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Display Function
Using the Disc and Title Menu
When Playing a DVD/CD
Using the Disc Menu
During the playback of a DVD disc, press the
During play, press the INFO button on the remote.
DVD
DVD
1 MENU button on the remote.
1
Disc Menu
Press ENTER key
for Disc Menu
DVD
Use the UP/DOWN buttons to select the desired
01
Title
Title Menu
2 item.
Select Disc Menu using the UP/DOWN buttons,
2 then press the RIGHT or ENTER button.
02
Chapter
Time
Function
Setup
0:00:13
ENG 5.1CH
Audio
Use the LEFT/RIGHT buttons to make the desired
Off
ENTER
RETURN
MENU
Subtitle
3D Sound
3 setup then press ENTER.
Off
• You may use the number buttons of the remote control to
directly access a title, chapter or to start the playback from
the desired time.
ENTER
CD
To make the screen disappear, press the INFO
4 button again.
CD
01
Track
Using the Title Menu
0:00:48
Off
Time
To access the desired title when there is more than
3D Sound
one in the disc. For example, if there is more than one
movie on a DVD, each movie will be identified.
Title
ENTER
DVD
During the playback of a DVD disc, press the
1 MENU button on the remote.
Disc Menu
Title Menu
Press ENTER key
for Title Menu
Most DVD discs are recorded in chapters so that you
can quickly find a specific passage (similar to tracks
on an audio CD).
Chapter
Select Title Menu using the UP/DOWN buttons,
2 then press the RIGHT or ENTER button.
Function
Setup
ENTER
RETURN
MENU
Allows playback of the film from a desired time.
You must enter the starting time as a reference.
Time
Audio
Refers to the language of the film soundtrack. In the
example, the soundtrack is played in English 5.1CH.
A DVD disc can have up to eight different
soundtracks.
Refers to the subtitle languages available in the disc.
You will be able to choose the subtitles language or, if
you prefer, turn them off from the screen.
Subtitle
3D Sound
A DVD disc can have up to 32 different subtitles.
A surround sound effect is generated using only two
front speakers.
NOTE
• Depending on the disc, the Title and Disc Menus may not work.
• Title Menu will only be displayed if there are at least two titles in the disc.
• You can also use the Title Menu and the Disc Menu, using the TITLE MENU and the DISC MENU buttons
on the remote.
20
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Function Menu
Repeat Play
Repeat the current track, chapter, title, a chosen section (A-B), or all of the disc.
Using the Function Menu
Press the MENU button during playback.
DVD
1
Info
Disc Menu
Title Menu
Function
Setup
Use the UP/DOWN buttons to highlight Function,
2 then press the RIGHT or ENTER button.
Zoom
When playing a DVD
Bookmark
Repeat
EZ View
DVD
Press the REPEAT button on the remote.
1 Repeat screen appears.
Function selection screen appears: Info, Zoom,
ENTER
Off Chapter Title A - B
ENTER
RETURN
MENU
3 Bookmark, Repeat and EZ View.
- Info (See Page 20)
Select Chapter, Title or A-B using the
- Zoom (See Page 32)
- Bookmark (See Page 31)
- Repeat (See Page 23)
- EZ View (See Page 24~25)
2 LEFT/RIGHT buttons.
REPEAT A-B
*
• Press the REPEAT button. Select A-B on screen with the
LEFT/RIGHT buttons or press the REPEAT A-B button on
the remote.
Use the UP/DOWN button to highlight one of the 5
CD
4 functions. Then press the RIGHT or ENTER button
• Press ENTER at the point where you want the repeat play to
start (A). The B is automatically highlighted.
• Press ENTER at the point where you want the repeat play to
stop (B).
to access the function.
ENTER
Track Disc A - B
Off
• To terminate the function, press the CLEAR button or the
REPEAT A-B button again.
• A-B REPEAT does not allow you to set point (B) until at least
5 seconds has elapsed after point (A) has been set.
Press ENTER.
3
To return to normal play, press REPEAT again,
4 then press the LEFT/RIGHT buttons to select Off
and press ENTER.
NOTE
NOTE
• You can also directly select these functions using their respective buttons on the remote.
• DVD repeats play by chapter or title, CD repeat play by disc or track.
• Depending on the disc, the Repeat function may not work.
22
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the Aspect Ratio (EZ View)
Adjusting the Aspect Ratio (EZ View)
If you are using a 4:3 TV
To play back using aspect ratio (DVD)
Press the EZ VIEW button.
For 16:9 aspect ratio discs
1 • The screen size changes when the button is pressed repeatedly.
• 4:3 Letter Box
• The screen zoom mode operates differently depending on the
screen setting in the initial setup menu.
• To ensure correct operation of the EZ VIEW button, you should set
the correct aspect ratio in the initial setup (See page 42).
Displays the content of the DVD title in 16:9 aspect ratio.
The black bars will appear at the top and bottom of the
screen.
• 4:3 Pan Scan
Displays the central portion of the 16:9 screen.
The right and left sections of the screen are cut off.
If you are using a 16:9 TV
For 16:9 aspect ratio discs
• Screen Fit
The top and bottom of the screen are cut off and the full
screen appears. The picture will look vertically stretched.
• Wide Screen
Displays the content of the DVD title in 16:9 aspect ratio.
• Zoom Fit
The top, bottom, left and right of the screen are cut off and
the central portion of the screen is enlarged.
• Screen Fit
The top and bottom of the screen are cut off. When playing a
2.35:1 aspect ratio disc, the black bars at the top and bottom
of the screen will disappear. The picture will look vertically
stretched. (Depending on the type of disc, the black bars may
not disappear completely.)
For 4:3 aspect ratio discs
• Normal Screen
Displays the content of the DVD title in 4:3 aspect ratio.
• Screen Fit
• Zoom Fit
The top and bottom of the screen are cut off and the full
screen appears. The picture will look vertically stretched.
The top, bottom, left and right of the screen are cut off and
the central portion of the screen is enlarged.
• Zoom Fit
The top, bottom, left and right of the screen are cut off and
the central portion of the screen is enlarged.
For 4:3 aspect ratio discs
• Normal Wide
Displays the content of the DVD title in 16:9 aspect ratio.
The picture will look horizontally stretched.
• Screen Fit
The top and bottom of the screen are cut off and the full
screen appears. The picture will look vertically stretched.
NOTE
• This function may behave differently depending on the type of disc.
• Zoom Fit
The top, bottom, left and right of the screen are cut off and
the central portion of the screen is enlarged.
• Vertical Fit
When a 4:3 DVD is viewed on a 16:9 TV, black bars will
appear at the left and right of the screen in order to prevent
the picture from looking horizontally stretched.
24
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Slow Repeat play
Selecting the Audio Language
You can select a desired language quickly and easily with the AUDIO button.
This feature allows you slowly repeat scenes containing sports, dancing,
musical instruments being played etc. so you can study them more closely.
When playing a DVD
Using the AUDIO button
DVD
During play, press the PLAY/PAUSE (
) button.
1
Press the AUDIO button.
DVD
ENTER
Off Chapter Title A - B
1
Press the
button to choose the play speed
2 between 1/8X, 1/4X, and 1/2X of normal.
DOLBY DIGITAL 5.1CH
ENG
Use the LEFT/RIGHT buttons to select the
2 desired language on a DVD.
Press the REPEAT button. Select A-B on screen
with the LEFT/RIGHT buttons or press the REPEAT
A-B button on the remote.
3
4
- The audio languages are represented by abbreviations.
Use the LEFT/RIGHT buttons to select Stereo,
3 LEFT or RIGHT. (On CD)
Press ENTER at the point where you want the
repeat play to start (A). The B is automatically
highlighted.
CD
CD
ENTER
Track Disc A - B
Off
Stereo
Press ENTER at the point where you want the
5 repeat play to stop (B).
To return to normal play, press REPEAT again,
6 then press the LEFT/RIGHT buttons to select Off.
Press ENTER, then press the PLAY/PAUSE button.
NOTE
NOTE
• The disc will play from A to B repeatedly at the speed you chose.
• This function depends on what languages are encoded on the disc and may not work with all DVDs.
• To terminate the function, press the CLEAR button or the REPEAT A-B button again.
• A DVD disc can contain up to 8 audio languages.
• A-B REPEAT does not allow you to set point (B) until at least 5 seconds has elapsed after point (A) has been
•
How to have the same audio language come up whenever you play a DVD;
set.
Refer to “Setting Up the Language Features” on page 40.
26
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting the Subtitle Language
You can select a desired subtitle quickly and easily with the SUBTITLE button.
Using the SUBTITLE button
Changing the Camera Angle
When a DVD contains multiple angles of a particular scene, you can select the Angle
function.
Using the ANGLE button
Press the ANGLE button to see if an ANGLE
Press the SUBTITLE button.
1
ENG
On
(
) mark is present at the upper left hand
corner of the screen.
Use the LEFT/RIGHT buttons to select the
2 desired subtitle language.
When an ANGLE mark is shown, press the
1 ANGLE button, then an ANGLE select icon
Use the UP/DOWN buttons to determine
3 whether or not the subtitle will be displayed.
will appear at the upper left hand corner of
the screen.
ENG
Off
- Initially, the subtitling will not appear on screen.
- The subtitle languages are represented by abbreviations.
Use the LEFT/RIGHT buttons to select the
2 desired screen angle.
To turn off the display, press the ANGLE
3 button again.
Changing the Subtitle color (DVD-P239 only)
Press the MODE button to change the subtitle
1 color to yellow or white when the player is in
progressive video mode only and subtitles are
on the screen.
NOTE
• This function depends on what languages are encoded on the disc and may not work with all DVDs.
• A DVD disc can contain up to 32 subtitle languages.
•
How to have the same subtitle language come up whenever you play a DVD;
Refer to “Setting Up the Language Features” on page 40.
28
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Instant Replay/Skip Function
Using the Bookmark Function
This feature lets you bookmark sections of a DVD so you can quickly find them at a later
time.
Using the Instant Replay function (DVD)
If you miss a scene, you can see it again using
this function.
Using the Bookmark Function (DVD)
If you press the I.REPLAY button, the current
During play, press the BOOKMARK button on the
1 remote. The Bookmark icons will be displayed.
1 scene moves backward about 10 seconds,
ENTER
—
—
—
and plays back.
Use the LEFT/RIGHT buttons to move to the
2 desired bookmark icon.
* Depending on the disc, the Instant Replay
function may not work.
When you reach the scene you want to mark,
3 press the ENTER button. The icon will change to
a number (1, 2, or 3).
Press the BOOKMARK button to turn off the
4 display.
Using the Instant Skip function (DVD)
Recalling a Marked Scene
Use this function to skip playback 10 seconds
ahead of the current scene.
During play, press the BOOKMARK button
1 on the remote.
CLEAR
1
–
–
Press the I.SKIP button.
1
- Playback will skip ahead 10 seconds.
Use the LEFT/RIGHT buttons to select a
2 marked scene.
- Depending on the disc, this feature may not work.
Press the PLAY/PAUSE (
3 to the marked scene.
) buttons to skip
Clearing a Bookmark
During play, press the BOOKMARK button
NOTE
1 on the remote.
• Up to three scenes may be marked at
a time.
Use the LEFT/RIGHT buttons to select the
2 bookmark number you want to delete.
• Depending on the disc, the Bookmark
function may not work.
Press the CLEAR button to delete a
3 bookmark number. Press the BOOKMARK
button to turn off the display.
30
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Zoom & 3D Sound Functions
MP3/WMA Play
When an MP3/WMA Disc is inserted into the DVD player, the first song file of the first folder
plays.
Using the Zoom Function (DVD)
During play or pause mode, press the ZOOM button
•
If more than two file extensions are present, select the media
of your choice by pressing UP/DOWN, then press the ENTER
button.
1 on the remote.
A zoom mark will be displayed on screen.
•
•
To change the currently playing media, press the STOP (
button twice and then press the DISC MENU button.
)
Use the UP/DOWN or LEFT/RIGHT buttons to select
2 the part of the screen you want to zoom in on.
ENTER
If no button on the remote controller is pressed for 60 seconds,
the menu will disappear and the selected item will be played.
Press the ENTER button.
3
MP3/WMA Play Function
- During DVD play, press ENTER to zoom in 2X/4X/2X/Normal in
order.
When the first song file is playing, the music
1 folder menu will appear on the right side of the
screen.
Up to 8 music folders can be displayed at a
time. If you have more than 8 folders on a
disc, press the LEFT/RIGHT buttons to bring
them up on the screen.
Using the 3D Sound Function
ENTER
RETURN
MENU
The simulated surround effect depends on the disc
contents. If you connect the unit to your stereo
Off
Use the UP/DOWN buttons to select the
system, you can enhance sound quality and
produce a greater surround effect.
This feature is useful when you are using the DVD
player with a two channel stereo through the
analog outputs.
2 desired music folder, then press ENTER.
Use the UP/DOWN buttons again to select a
song file. Press ENTER to begin playback of
the song file.
(Discs which are recorded with LPCM or DTS will
not work.)
Program/Random playback
During play, press the 3D button.
NOTE
1 The 3D SOUND mark will be displayed on
PROGRAM
RANDOM
Press the MODE button to switch between the
RANDOM and PROGRAM modes. See page 35
for more information on these modes.
screen.
• 3D Sound is possible only on discs
recorded using DOLBY SURROUND
or DOLBY DIGITAL. However, some
of these discs do not contain rear
channel sound signals.
Press the UP/DOWN buttons to turn the
2 3D Sound feature on or off.
• Depending on the disc, the Zoom and
3D Sound functions may not work.
NOTE
•
Press the REPEAT button to hear only music continuously and press it once again to release.
• PROGRAM/RANDOM playback cannot be used if the disc contains more than two types of file extensions.
32
33
Download from Www.Somanuals.com. All Manuals Search And Download.
MP3/WMA Play
Program Play & Random Play
Program Play (CD/MP3/WMA)
CD-R MP3/WMA discs
Press the MODE button.
1
PROGRAM
When playing CD-R/MP3 or WMA discs, please follow all the recommendations for CD-R
above, plus the comments below:
RANDOM
Use the LEFT/RIGHT buttons to select
2 PROGRAM. Press the ENTER button.
• Your MP3 or WMA files should be ISO 9660 or JOLIET format.
ISO 9660 format and Joliet MP3 or WMA files are compatible with Microsoft's DOS and Windows,
and with Apple's Mac. These two formats are the most widely used.
Use the LEFT/RIGHT/UP/DOWN buttons to
3 select the first track to add to the program.
• When naming your MP3 or WMA files do not exceed 8 characters, and place ".mp3, .wma" as
the file extension.
Press the ENTER button. The selection
numbers appear in the Program Order box.
General name format of: Title.mp3. or Title.wma. When composing your title, make sure that you use
8 characters or less, have no spaces in the name, and avoid the use of special characters including:
(.,/,\,=,+).
PROGRAM 01
Track
Program Order
Press the PLAY/PAUSE (
4 The disc will be played in programmed order.
) button.
- - - - - - - -
- - - - - - - -
- - - - - - - -
- - - - - - - -
- - - - - - - -
01 02 03 04
05 06 07 08
09 10 11 12
13 14 15 16
• Use a decompression transfer rate of at least 128 Kbps when recording MP3 files.
Sound quality with MP3 files basically depends on the rate of compression/decompression you
choose. Getting audio CD quality sound requires an analog/digital sampling rate, that is conversion to
MP3 format, of at least 128 Kbps and up to 160 Kbps. However, choosing higher rates, like 192 Kbps
or more, only rarely give better sound quality.
ENTER
RETURN
CLEAR
Conversely, files with decompression rates below 128 Kbps will not be played properly.
• Use a decompression transfer rate of at least 64Kbps when recording WMA files.
Sound quality with WMA files basically depends on the rate of compression/decompression you
choose. Getting audio CD quality sound requires an analog/digital sampling rate, that is conversion to
WMA format, of at least 64Kbps and up to 192Kbps.
Random Play (CD/MP3/WMA)
Press the MODE button.
PROGRAM
1
RANDOM
Conversely, files with decompression rates below 64Kbps or over 192Kbps will not be played
properly.
Use the LEFT/RIGHT buttons to select
2 RANDOM. Press the ENTER button.
• Do not try recording copyright protected MP3 files.
The disc will be played in random order.
Certain "securized" files are encrypted and code protected to prevent illegal copying. These files are
of the following types: Windows MediaTM (registered trade mark of Microsoft Inc) and SDMITM
(registered trade mark of The SDMI Foundation). You cannot copy such files.
• Important: The above recommendations cannot be taken as a guarantee that the DVD player will
play MP3 recordings, or as an assurance of sound quality.
You should note that certain technologies and methods for MP3 file recording on CD-Rs prevent
optimal playback of these files on your DVD player (degraded sound quality and in some cases,
inability of the player to read the files).
NOTE
• Depending on the disc, the Program and Random Play functions may not work.
• To resume normal play, press the CLEAR button.
• This unit can play a maximum of 500 files and 300 folders per disc.
• PROGRAM/RANDOM playback cannot be used if the disc contains more than two types of file extensions.
• This unit can support a maximum of 99 programmed orders.
34
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Picture CD Playback
Picture CD Playback
Open the disc tray.
1
CD-R JPEG Discs
Load the disc on the tray.
2 - Load the disc with the labeled side up.
• Only files with the ".jpg" and ".JPG" extensions can be played.
Close the tray.
• If the disc is not closed, it will take longer to start playing and not all of the recorded files may be
played.
3 - The tray closes and you should get a screen that looks like the
ENTER
one to the right.
• Only CD-R discs with JPEG files in ISO 9660 or Joliet format can be played.
• The name of the JPEG file may not be longer than 8 characters and should contain no blank spaces
or special characters (. / = +).
• Select JPEG in the menu to view a Photo CD.
• Use the UP/DOWN or LEFT/RIGHT buttons on the remote controller
to select the picture you want to view and then press the ENTER
ALBUM
PHOTO: 1 /215
button. (Press the PLAY/PAUSE (
the Slide Show mode.)
) button if you want to play it in
• Only a consecutively written multisession disc can be played. If there is a blank segment in the
multisession disc, the disc can be played only up to the blank segment.
• A maximum of 500 images can be stored on a single CD.
• To see the next 6 pictures, press the
button.
• Only Kodak Picture CDs can be played.
• To see the previous 6 pictures, press the
button.
ENTER
• When playing a Kodak Picture CD, only the JPEG files in the pictures folder can be played.
• Picture discs other than Kodak Picture CD may take longer to start playing or may not play at all.
• If a number of files in 1 Disc is over 500, only 500 JPEG file can be played.
• If a number of folders in 1 Disc is over 300, only JPEG files in 300 folders can be played.
•
: Return to the Album Screen.
Press the UP/DOWN or LEFT/RIGHT buttons on the remote
controller to display the menu again.
PHOTO: 1 /215
ENTER RETURN
•
•
•
: Each time the ENTER button is pressed, the picture rotates
90 degrees clockwise.
: Each time the ENTER button is pressed, the picture is
enlarged up to 4X. (Normal ➝ 2X ➝ 4X ➝ 2X ➝ Normal)
: The unit enters slide show mode.
*Press the RETURN button to return to the album screen.
*Before the Slide Show can begin, the picture interval must be set.
ENTER RETURN
TIMER:
•
•
•
: When this icon is selected and ENTER is pressed, the
pictures change automatically with about an 6 second interval.
: The pictures change automatically with about an 12 second
interval.
: The pictures change automatically with about an
18 second interval.
*Depending on the file size, each interval between images may take
longer or shorter than the manual suggests.
•
•
To change the currently playing media, press the STOP (
If no button on the remote controller is pressed for 60 seconds, the menu will disappear and the selected
item will be played.
) button twice and then press the DISC MENU button.
NOTE
• Press the TITLE MENU button to return to the album screen.
• Press the RETURN button to return to the slide show.
• If no buttons on the remote controller pressed for 10 seconds, the menu will disappear.
Press the UP/DOWN or LEFT/RIGHT buttons on the remote controller to display the menu again.
36
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Setup Menu
Setting Up the Language Features
The Setup menu lets you customize your DVD player by allowing you to select various
language preferences, set up a parental level, even adjust the player to the type of
television screen you have.
If you set the player menu, disc menu, audio and subtitle language in advance,
they will come up automatically every time you watch a movie.
Using the Player Menu Language
e.g) Setting up in English.
With the unit in Stop mode, press the MENU button
DVD
1 on the remote. Select Setup using UP/DOWN
With the unit in Stop mode, press the MENU button.
1
Disc Menu
buttons, then press the RIGHT or ENTER button.
Select Setup using UP/DOWN buttons, then RIGHT
Title Menu
2 or ENTER button.
Language Setup : Setup of the Language.
Function
Setup
Audio Setup : Setup of the Audio Options
Select Language Setup using UP/DOWN buttons,
LANGUAGE SETUP
3 then press the RIGHT or ENTER button.
Display Setup : Setup of the Display Options
Use to select which type of screen you want to watch
and several display options.
Select Player Menu using UP/DOWN buttons, then
4 press the RIGHT or ENTER button.
PLAYER MENU LANGUAGE
Parental Setup : Setup of the Parental Level
Allows users to set the level necessary to prevent
children from viewing unsuitable movies such as
those with violence, adult subject matter, etc.
Use the UP/DOWN buttons to select ‘English’.
5
6
Player Menu
English
Français
Deutsch
Español
Italiano
Press the ENTER button.
- English is selected and the screen returns to SETUP menu.
- To make the SETUP menu disappear, press the RETURN or
LEFT button.
Nederlands
Use the UP/DOWN buttons on the remote to access
2 the different features.
Using the Disc Menu Language
Press the ENTER button to access the sub features.
This function changes the text language only on the disc
menu screens.
3
e.g) Setting up in English.
To make the setup screen disappear after setting up, press the
MENU button again.
With the unit in Stop mode, press the MENU button.
DISC MENU LANGUAGE
1
Disc Menu
Select Setup using UP/DOWN buttons, then RIGHT
2 or ENTER button.
Select Language Setup using UP/DOWN buttons,
Others
3 then press the RIGHT or ENTER button.
NOTE
Depending on the disc, some Setup Menu selections may not work.
Select Disc Menu using UP/DOWN buttons, then
4 press the RIGHT or ENTER button.
Use the UP/DOWN buttons to select ‘English’.
5
6
- Select “Others” if the language you want is not listed.
Press the ENTER button.
- English is selected and the screen returns to SETUP menu.
38
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Up the Language Features
Setting Up the Audio Options
With the unit in Stop mode, press the MENU button.
Using the Audio Language
1
With the unit in Stop mode, press the MENU button.
Select Setup using UP/DOWN buttons, then RIGHT
2 or ENTER button.
1
AUDIO LANGUAGE
Select Setup using UP/DOWN buttons, then RIGHT
2 or ENTER button.
Audio
Select Audio Setup using UP/DOWN buttons, then
3 press the RIGHT or ENTER button.
Select Language Setup using UP/DOWN buttons,
Original
Others
3 then press the RIGHT or ENTER button.
Use the UP/DOWN buttons to select the desired
4 item. Then press the RIGHT or ENTER button.
AUDIO SETUP
Select Audio using UP/DOWN buttons, then press
4 the RIGHT or ENTER button.
Digital Output
DTS
:
:
PCM
Off
Digital Output
Dynamic Compression
PCM Down Sampling
: On
: On
1. PCM : Converts to PCM(2CH) 48kHz audio.
Select PCM when using the Analog
Audio Outputs.
2. Bitstream : Converts to Dolby Digital Bitstream (5.1CH).
Select Bitstream when using the Digital
Audio Output.
Press the UP/DOWN buttons to select ‘English’.
5
- Select “Original” if you want the default soundtrack language to
be the original language the disc is recorded in.
- Select “Others” if the language you want is not listed.
Press the ENTER button.
6 - English is selected and the screen returns to SETUP menu.
Be sure to select the correct Digital Output or
no audio will be heard.
NOTE
Using the Subtitle Language
DTS
1. Off : Doesn’t output digital signal.
2. On : Outputs DTS Bitstream via digital output only.
Select DTS when connecting to a DTS Decoder.
With the unit in Stop mode, press the MENU button.
1
SUBTITLE LANGUAGE
Automatic
Select Setup using UP/DOWN buttons, then RIGHT
Dynamic Compression
1. On : To select dynamic compression.
2. Off : To select the standard range.
2 or ENTER button.
Subtitle
Select Language Setup using UP/DOWN buttons,
Others
3
then press the RIGHT or ENTER button.
PCM Down Sampling
1. On : Select this when the amplifier connected to the player is not 96KHz compatible.
In this case, the 96KHz signals will be down converted to 48KHZ.
2. Off : Select this when the amplifier connected to the player is 96KHz compatible.
In this case, all signals will be output without any changes.
Select Subtitle using UP/DOWN buttons, then press
4 the RIGHT or ENTER button.
5
Use the UP/DOWN buttons to select ‘English’.
- Select “Automatic” if you want the subtitle language to be the
same as the language selected as the audio preference.
- Select “Others” if the language you want is not listed.
Some discs may not contain the language you select as
your initial language; in that case the disc will use its
original language setting.
NOTE
• If the selected language is not
recorded on the disc, the original
pre-recorded language is selected.
NOTE
•
How to make the SETUP menu disappear or return to menu screen during set up;
Press RETURN or LEFT button.
•
Howto make the SETUP menu
disappear or
during set up; Press RETURN or
LEFT button.
return to menu screen
• Manufactured under license from Dolby Laboratories.
“Dolby” and the double-D symbol are trademarks of Dolby Laboratories.
Press the ENTER button.
- English is selected and the screen returns to SETUP menu.
• “DTS” and “DTS Digital Out” are trademarks of Digital Theater Systems, Inc.
6
40
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Up the Display Options
Setting Up the Parental Control
The Parental Control function works in conjunction with DVDs that have been assigned
a rating - which helps you control the types of DVDs that your family watches.
There are up to 8 rating levels on a disc.
With the unit in Stop mode, press the MENU button.
1
Select Setup using UP/DOWN buttons, then RIGHT
2 or ENTER button.
Select Display Setup using UP/DOWN buttons,
3 then press the RIGHT or ENTER button.
With the unit in Stop mode, press the MENU button.
1
Select Setup using UP/DOWN buttons, then RIGHT
2 or ENTER button.
Select Parental Setup using UP/DOWN buttons,
Use the UP/DOWN buttons to select the desired
3 then press the RIGHT or ENTER button.
4 item. Then press the RIGHT or ENTER button.
PARENTAL SETUP
Use RIGHT or ENTER to select Yes if you want to
TV Aspect
Use Password
:
No
4 use a password. The Enter Password screen
Depending on the type of television you have, you may
want to adjust the screen setting (aspect ratio).
1. 4:3 Letter Box :
appears.
Select when you want to see the total 16:9 ratio
screen DVD supplies, even though you have a TV
with a 4:3 ratio screen. Black bars will appear at the
top and bottom of the screen.
Enter your password. The Re-enter Password
ENTER
RETURN
MENU
5 screen appears to confirm the password.
Enter your password again.
The Parental Control screen appears.
TV ASPECT
CREATE PASSWORD
2. 4:3 Pan Scan :
Select this for conventional size TVs when you want to
see the central portion of the 16:9 screen. (Extreme
left and right side of movie picture will be cut off.)
3. 16:9 Wide :
4:3 Letter Box
4:3 Pan Scan
16:9 Wide
About the Rating Level ;
Enter Password
The Rating Level will work only when Use Password
is set to Yes. To unlock the player, use UP/DOWN to
select No. Use RIGHT or ENTER to select Rating
-
-
-
-
You can view the full 16:9 picture on your widescreen TV.
RETURN
0 ~ 9
Still Mode
level. Press ENTER.
These options will help prevent picture shake in still
mode and display small text clearer.
1. Auto : When selecting Auto, Field/Frame mode will be
automatically converted.
- Use UP/DOWN to select the level (e.g. Level 6) and press
ENTER. Discs that contain Level 7 will now not play.
- To cancel the rating level, use RIGHT or ENTER to select No in
Use Password.
2. Field : Select this feature when the screen shakes in
the Auto mode.
3. Frame : Select this feature when you want to see
small letters more clearly in the Auto mode.
About the Change Password ;
- Use UP/DOWN to select Change Password.
Press ENTER. The Change Password screen appears.
- Enter your new password. Re-enter the new password again.
Screen Messages
Use to turn on-screen messages On or Off.
e.g) Setting up in LEVEL6.
Front Display
Adjust the brightness of the unit’s front panel display.
1. Auto Dim : Makes the Front Panel Display dim
automatically when playing a DVD.
RATING LEVEL
NOTE
NOTE
Level 8 Adult
Level 7
Level 6
•
How to make the SETUP menu
disappear or return to menu
screen during set up;
•
How to make the SETUP menu disappear or return to
menu screen during set up;
Press RETURN or LEFT button.
• If you have forgotten your password, see Forget Password in
the Troubleshooting Guide.
Level 5
2. Bright : Makes the Front Panel Display bright.
3. Dim : Makes the Front Panel Display dim.
Level 4
Level 3
Level 2
Level 1 Kids Safe
Press the RETURN or LEFT button.
Black Level
Adjusts the brightness of the screen.(On/Off)
42
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Specifications
Before requesting service (troubleshooting), please check the following.
Power Requirements
Power Consumption
Weight
AC 110~240 V, 50/60 Hz
12 W
Action
Problem
Page
5.3 lbs
General
•
•
•
Check the batteries in the remote. May need replacing.
Operate the remote control at a distance of no more than 20 feet.
Remove batteries and hold down one or more buttons for several
minutes to drain the microprocessor inside the remote to reset it.
Reinstall batteries and try remote again.
No operations can be
performed with remote.
Dimensions
W 16.9 in x D 9.4 in x H 2.4 in
+41°F to +95°F
P5
Operating Temperature Range
Operating Humidity Range
10 % to 75 %
Reading Speed : 11.45 ft/sec.
Approx. Play Time
•
•
Ensure that the disc is installed with the label side facing up.
Check the region number of the DVD.
Disc does not play.
P8
DVD
(DIGITAL VERSATILE DISC)
5.1 channel sound is not
being reproduced.
•
5.1 channel sound is reproduced only when the following
conditions are met. :
1) The DVD player is connected with the proper amplifier
2) The disc is recorded with 5.1 channel sound.
Check whether the disc being played has the “Dolby 5.1 ch” mark
on the outside.
(Single Sided, Single Layer Disc) : 135 min.
Reading Speed : 3.9 to 4.6 ft/sec.
Maximum Play Time : 74 min.
Reading Speed : 3.9 to 4.6 ft/sec.
Maximum Play Time : 20 min.
1 channel : 1.0 Vp-p (75 Ω load)
Y : 1.0 Vp-p (75 Ω load)
Pr : 0.70 Vp-p (75 Ω load)
Pb : 0.70 Vp-p (75 Ω load)
Luminance Signal : 1.0 Vp-p (75 Ω load)
Chrominance Signal : 0.286 Vp-p (75 Ω load)
L(1/L), R(2/R)
Disc
CD : 5"
(COMPACT DISC)
P14
P41
•
CD : 31/2"
• Check if your audio system is connected and working properly.
• In a SETUP Menu, is the Audio Output set to Bitstream?
(COMPACT DISC)
Composite Video
Component Video
The
icon appears on
• The features or action cannot be completed at this time because:
1. The DVD’s software restricts it.
screen.
2. The DVD’s software doesn’t support the feature (e.g., angles).
3. The feature is not available at the moment.
4. You’ve requested a title or chapter number or search time that
is out of range.
P18
Video
Output
Disc Menu doesn’t appear.
•
•
Check if the disc has a Menu.
S-VIDEO
P38~39
P38~43
Play mode differs from the
Setup Menu selection.
Some of the functions selected in the Setup Menu may not work
properly if the disc is not encoded with the corresponding function.
2 Channel
The screen ratio cannot
be changed.
*Frequency Response
48 kHz Sampling : 4 Hz to 22 kHz
96 kHz Sampling : 4 Hz to 44 kHz
110 dB
•
•
The Screen Ratio is fixed on your DVDs.
P42
P41
Audio
Make sure you have selected the correct Digital Output in the
Audio Options Menu.
No audio.
*S/N Ratio
Output
*Dynamic Range
100 dB
•
Press power on from a cold start with no disc in the unit. Press the
Forgot password
STOP (
) and PLAY (
) buttons simultaneously on the front
*Total Harmonic Distortion
0.004 %
panel for three seconds. The Select Menu Language display will
appear. Select the desired language button. Press the MENU
button on the remote control to select the Parental Mode. The
Parental Mode is now unlocked as indicated on the display.
Press the DOWN button to select Parental. Press ENTER and the
Create Password display will appear. You can now set your rating
level and change your password to a new number.
*: Nominal specification
P43
• Samsung Electronics Co., Ltd reserves the right to change the specifications without notice.
• Weight and dimensions are approximate.
If you experience other
problems.
•
•
Go to the contents and find the section of the instruction book that
contains the explanations regarding the current problem, and follow
the procedure once again.
If the problem still cannot be solved, please contact your nearest
authorized service center.
44
45
Download from Www.Somanuals.com. All Manuals Search And Download.
|