DVD-C500
DVD-C550
DVD-C550K
DVD Player
User Manual
imagine the possibilities
Thank you for purchasing this Samsung product.
To receive more complete service, please register
your product at
AK68-01881A
ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
Note
Disc Markings
DVD-C550
7
-
-
-
Discs which cannot be played with this player.
•
•
•
•
DVD-ROM
CD-ROM
CDI
• DVD-RAM
• CDV
• CVD
~
Play Region Number
CDGs play audio only, not graphics.
NTSC broadcast system in USA,
Canada, Korea, Japan etc.
NTSC
Ability to play back may depend on recording
conditions.
•
•
•
DVD-C550K
7
DVD-R, +R
CD-RW
DVD+RW, -RW (V mode)
Dolby Digital disc
Stereo disc
STEREO
The unit may not play certain CD-R, CD-RW
and DVD-R due to the disc type or recording
conditions.
DIGITAL
SOUND
9
8
Digital Audio disc
DTS disc
COPY PROTECTION
1. DISC TRAY
Place the disc here.
2. DISPLAY
7. USB HOST (Only DVD-C550/
DVD-C550K)
Many DVD discs are encoded with copy protec-
tion. Because of this, you should only connect
your DVD player directly to your TV, not to a VCR.
Connecting to a VCR results a distorted picture
from copy-protected DVD discs.
MP3 disc
Connect digital still camera, MP3 player,
memory stick, Card reader other removable
storage devices.
Operation indicators are displayed here.
3. OPEN/CLOSE ( )
Press to open and close the disc tray.
4. STOP ( )
Region Number
This product incorporates copyright protection
technology that is protected by methods claims
of certain U.S. patents and other intellectual
property rights owned by Macrovision Corporation
and other rights owners. Use of this copyright
protection technology must be auzthorized by
Macrovision Corporation, and is intended for
home and other limited viewing uses only unless
otherwise authorized by Macrovision Corporation.
Reverse engineering or disassembly is prohibited.
8. MICROPHONE VOLUME
(Only DVD-C550K)
Both the DVD player and the discs are coded by
region. These regional codes must match in order
for the disc to play. If the codes do not match, the
disc will not play.
Stops play.
Use to adjust microphone volume level. Use
the button by pressing it. Turn it to the left or
right to control the volume.
5. PLAY/PAUSE (
)
Play or pause the disc.
6. POWER ON/OFF (
)
9. MIC 1/2 (Only DVD-C550K)
Connect Microphone for karaoke functions.
The Region Number for this player is described
on the rear panel of the player.
Turn on/off and the player is turned on/off.
PROGRESSIVE SCAN OUTPUTS
(576p,720p,1080p)
“CONSUMERS SHOULD NOTE THAT NOT ALL
HIGH DEFINITION TELEVISION SETS ARE
FULLY COMPATIBLE WITH THIS PRODUCT AND
MAY CAUSE ARTIFACTS TO BE DISPLAYED
IN THE PICTURE, IN CASE OF 576, 720, 1080
PROGRESSIVE SCAN PICTURE PROBLEMS, IT IS
RECOMMENDED THAT THE USER SWITCH THE
CONNECTION TO THE ‘STANDARD DEFINITION’
OUTPUT. IF THERE ARE QUESTIONS REGARDING
YOUR TV SET COMPATIBILITY WITH THIS
MODEL 576p, 720p, 1080p DVD PLAYER, PLEASE
CONTACT SAMSUNG'S CUSTOMER SERVICE
CENTER.”
DivX Certification (Only DVD-C550/
DVD-C550K)
Tour of the Remote Control
DVD-C500
DVD-C550
DVD-C550K
DivX, DivX Certified,
and associated logos are trademarks of
DivXNetworks, Inc and are used under license.
“DivX Certified to play DivX video, including
premium content.”
1
2
15
16
1
2
1
2
15
16
17
18
19
20
21
22
15
16
17
18
19
20
21
22
3
3
3
4
5
17
18
19
4
5
4
5
20
21
6
6
6
7
8
22
23
24
7
8
7
8
23
24
23
24
9
9
9
10
10
10
25
26
27
25
26
27
25
26
27
Description
Front Panel Controls
DVD-C500
11
12
11
12
11
12
13
14
13
14
13
14
28
28
28
29
3
Download from Www.Somanuals.com. All Manuals Search And Download.
1. DVD POWER Button
Turns the power on or off.
2. DVD Button
Use to select the DVD player for operation.
3. TV Button
Use to select a Samsung TV for operation.
4. EZ VIEW Button
Lets you easily adjust the aspect ratio of a
picture according to the screen size of your TV
(16:9 or 4:3).
5. MARKER Button
6. REPEAT Button
Allows you to repeat play a title, chapter, track,
or disc.
16. HDMI SEL. Button
HDMI Output resolution setup.
17. USB Button (Only DVD-C550/
DVD-C550K)
ZOOM Button (Only DVD-C500)
Enlarge the DVD Picture.
18. VIDEO SEL. Button
Changes video output mode.
19. REPEAT A-B Button
Allows you to repeat play a chosen section (A-
B) on a disc.
20. SUBTITLE Button
21. TITLE MENU Button
Brings up the Title menu.
22. AUDIO/TV SOURCE Button
Use this button to access various audio func-
tions on a disc. Use this button to select an
available TV source (mode TV).
B. Connection to a TV (Interlace/Progressive)
1. Using component video cables, connect the COMPONENT VIDEO OUT terminal on the rear of the DVD
player to the COMPONENT IN terminal of TV.
2. Using the audio cables, connect the AUDIO (red and white) OUT terminals or 5.1CH (Front L-R) on the
rear of the DVD player to the AUDIO (red and white) IN terminals of TV. Turn on the DVD player and TV.
3. Press the input selector on your TV remote control until the Component signal from the DVD player
appears on the TV screen.
4. Set the Video Output to I-SCAN/P-SCAN in the Display Setup menu. You can use the VIDEO SEL. button
to change the Video Output mode.
Note
- What is “Progressive Scan”?
Progressive scan has twice as many scanning lines as the interlace output method has. Progressive
scanning method can provide better and clearer picture quality.
7. DISC MENU Button
Brings up the Disc menu.
8. INFO Button
Used to displays playback info banner.
9. TV VOL (+, -) Buttons
Controls volume.
23. PAUSE Button ( )
Pauses disc play.
24. SEARCH Buttons (
C. Connecting to a TV with DVI/HDMI Jack
/
)
1. Using the HDMI-DVI/HDMI-HDMI cable , connect the HDMI OUT terminal on the rear of the DVD player to
the DVI/HDMI IN terminal of your TV.
2. Using the audio cables, connect the AUDIO (red and white) OUT terminals or 5.1CH (Front L-R) on the rear
of the DVD player to the AUDIO (red and white) IN terminals of your TV. Turn on the DVD player and TV.
3. Press the input selector on your TV remote control until the DVI/HDMI signal from the DVD player appears
on your TV screen.
Allows you to search forward/backward
through a disc.
10. SKIP Buttons (
/
)
Use to skip the title, chapter or track.
25. TV CH (
,
) Buttons
11. STOP Button (
12. MENU Button
)
Channel selection.
26. PLAY Button ( )
Begins disc play.
27. RETURN Button
Returns to a previous menu.
28. EXIT Button
Exits the on-screen menu.
Brings up the DVD player’s menu.
13. ENTER/π/†,√/® Buttons
This button functions as a toggle switch.
14. TOOLS Button
Displays the current disc mode. It also lets you
access the Display function.
15. OPEN/CLOSE ( ) Button
To open and close the disc tray.
HDMI VIDEO Specifications
When you press the HDMI SEL. button, 480p, 576p, 720p, 1080p, 1080i are selected in order.
The first press of the HDMI SEL. button brings up the current resolution.
The second press allows you to change the HDMI output resolution.
29. KARAOKE (†) Button
(Only DVD-C550K)
Use to begin Karaoke functions.
-
-
-
-
-
Depending on your TV, certain HDMI output resolutions may not work.
Please refer to the user’s manual of your TV.
Connections
If HDMI or HDMI-DVI cable is plugged into TV, the DVD player’s output is set to HDMI/DVI within 10 seconds.
If you set the HDMI output resolution 720p,1080p or 1080i, HDMI output provides better picture quality.
If you connect an HDMI cable between Samsung TV and this DVD player, you can operate this
DVD player using your TV remote control. This is only available with Samsung TVs that support
Anynet+(HDMI-CEC).
Choosing a Connection
The following shows examples of connections commonly used to connect the DVD player with a TV and
other components.
- If your TV has an
logo, then it will
Supports the Anynet+ Function.
Before Connecting the DVD Player
•
HDMI (High Definition Multimedia Interface)
-
-
Always turn off the DVD player, TV, and other components before you connect or disconnect any cables.
Refer to the user’s manual of the additional components you are connecting for more information on
those particular components.
HDMI is an interface to enable the digital transmission of video and audio data with just a single
connector.Using HDMI, the DVD player transmits a digital video and audio signal and displays a
vivid picture on a TVhaving an HDMI input jack.
A. Connecting to a TV (For Video)
•
HDMI connection description HDMI connector
1. Using video/audio cables, connect the VIDEO (yellow)/AUDIO (red and white) OUT terminals or 5.1CH
(Front L-R) on the rear of the DVD player to the VIDEO (yellow)/AUDIO (red and white) IN terminals of TV.
2. Turn on the DVD player and TV.
3. Press the input selector on your TV remote control until the Video signal from the DVD player appears on
the TV screen.
- Both uncompressed video data and digital audio data (LPCM or Bit Stream data).- Though the
player uses a HDMI cable, the player outputs only a pure digital signal to the TV.
- If TV does not support HDCP (High-bandwidth Digital content protection), snow noise appears
on the screen.
•
•
Why does Samsung use HDMI?
Analog TVs require an analog video/audio signal. However, when playing a DVD, the data trans-
mitted to a TV is digital. Therefore either a digital-to-analog converter (in the DVD player) or an
analog-to-digital converter (in the TV) is required. During this conver-sion, the picture quality is
degraded due to noise and signal loss. DVI technology is superior because it requires no D/A con-
version and is a pure digital sig-nal from the player to your TV.
Note
-
-
-
Noise may be generated if the audio cable is too close to the power cable.
If you want to connect to an Amplifier, please refer to the Amplifier connection page.
The number and position of terminals can vary depending on your TV set. Please refer to the user’s
manual of the TV.
What is the HDCP?
-
-
If there is one audio input terminal on the TV, connect it to the [AUDIO OUT][left] (white) terminal of the
DVD player.
If you press the VIDEO SEL. button when DVD Player is in stop mode or no disc is inserted, the Video
Output mode changes in the following sequence: (I-SCAN ➝ P-SCAN)
HDCP (High-bandwidth Digital Content Protection) is a system for protecting DVD content outputted via
DVI from being copied. It provides a secure digital link between a video source (PC, DVD. etc) and a
display device (TV, projector . etc). Content is encrypted at the source device to prevent unauthorized.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
D. Connection to an Audio System (2 Channel Amplifier, Dolby digital,
MPEG2 or DTS Amplifier)
Basic functions
Playing a Disc
1. Using the audio cables, connect the AUDIO (red and white) OUT terminals or 5.1CH (Front L-R) on the
rear of the DVD player to the AUDIO (red and white) IN terminals of the Amplifier. If using a coaxial cable,
connect the DIGITAL AUDIO OUT (COAXIAL) terminal on the rear of the DVD player to the DIGITAL
AUDIO IN (COAXIAL) terminal of the Amplifier.
Before Play
2. Using the video signal cable(s), connect the VIDEO or COMPONENT OUT terminals on the rear of the
DVD player to the VIDEO or COMPONENT IN terminal of your TV.
3. Turn on the DVD player, TV, and Amplifier.
-
Turn on your TV and set it to the correct Video Input by pressing TV/VIDEO button on the TV remote
control.
- If you connected an external Audio System, turn on your Audio System and set it to the correct
Audio Input.
4. Press the input select button of the Amplifier to select external input in order to hear sound from the
DVD player.
After plugging in the player, the first time you press the DVD POWER button, this screen comes up: If you want
to select a language, press the π/† button, and then press the ENTER button. (This screen will only appear
when you plug in the player for the first time.)If the language for the startup screen is not set, the set-tings may
change whenever you turn the power on or off. Therefore, make sure that you select the language you want
DVD-C500
DVD-C550
DVD-C550K
Dolby digital or DTS
ampilfier
Dolby digital or DTS
ampilfier
Coaxial Cable
to use.Once you select a menu language, you can change it by pressing the
■/®|| button on the front panel
D
Coaxial Cable
D
of the unit for more than 5 seconds with no disc in the unit. Then the SELECT MENU LANGUAGE window
WHITE
RED
appears again where you can reset your preferred language.
GREEN
GREEN
OR
BLUE
BLUE
RED
WHITE
RED
Video
YELLOW
YELLOW
RED
Audio Cable
Audio Cable
Video
Cable
C
A
Using the Search and Skip Functions
Cable
C
Component
Cable
A
B
YELLOW
B
OR
WHITE
Component Cable
OR
RED
WHITE
YELLOW
GREEN
RED
RED BLUE
HDMI-DVI cable
HDMI cable
BLUE GREEN
During play, you can search quickly through a chapter or track, and use the skip function to jump to the
next selection.
RED
HDMI cable
HDMI-DVI cable
Searching through a Chapter or Track
WHITE
During play, press the SEARCH (k or K) button on the remote control for more than 1 second.
RED
RED
WHITE
Audio Cable
WHITE
Audio Cable
WHITE
RED
RED
Note
DVD
CD
2X, 4X, 8X, 16X, 32X
2X, 4X, 8X, 16X, 32X
2-Channel stereo amplifier
-
The speed marked in this function may be different from the
actual playback speed.
2-Channel stereo amplifier
VCD
4X, 8X,
-
No sound is hearing during search mode (Except CD).
E. Connection to a 5.1CH Analog Amplifier (Only DVD-C550K)
1. If using audio cables for 5.1 CH Analog Amplifier connect the 5.1CH ANALOG AUDIO OUT terminals on
the rear of the DVD player to the 5.1CH ANALOG AUDIO
IN terminals of the 5.1CH Analog Amplifier.
Skipping Tracks
During play, press the SKIP (|k or K|) button.
-
-
-
When playing a DVD, if you press the SKIP (K|) button, it moves to the next chapter. If you press
the SKIP (|k) button, it moves to the beginning of the chapter. One more press makes it move to the
beginning of the previous chapter.
2. Using the video signal cable(s), connect the VIDEO,
COMPONENT or HDMI OUT terminals on the rear of the
DVD player to the VIDEO, COMPONENT or DVI IN termi-
nals of your TV
When playing a VCD, if you press the SKIP (K|) button, it moves to the next track. If you press the
SKIP (|k) button, it moves to the beginning of the track. One more press makes it move to the begin-
ning of the previous track.
3. Turn on the DVD player, TV, and Amplifier.
RED
RED
WHITE
WHITE
BLACK
4. Press the input select button of the Amplifier to select
external input in order to hear sound from the DVD player.
Refer to your Amplifier's user manual to set the Amplifier's
audio input.
BLACK
If a track exceeds 15 minutes when playing a VCD and you press the K| button, it moves forward 5
minutes. If you press the |k button, it moves to the beginning of the track. One more press makes it
move to the beginning of the previous track.
E
5.1ch Analog
Amplifier
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the A-B Repeat function
Using the Display Function
1.Press the REPEAT A-B button on the remote control.
When Playing a DVD/VCD/MPEG4
2.Press the REPEAT A-B button at the point where you want repeat play to start (A).
3.Press the REPEAT A-B button at the point where you want the repeat play to stop (B).
3. To return to normal play, press the REPEAT A-B button until the display shows Repeat : Off
1. During play, press the TOOLS button on the remote control.
2. Press the π/† buttons to select the desired item.
.
3. Press the √/® buttons to make the desired setup.
4. To make the screen disappear, press the TOOLS button again.
Note
- A-B REPEAT allow you to set point (B) directly after point (A) has been set
- Depending on a disc, the Repeat function may not work.
The functions when using the Display function are listed in the table below.
To access the desired title when there is more than one in the disc. For example, if there is
more than one movie on a DVD, each movie will be identified.
Slow Play
Most DVD discs are recorded in chapters so that you can quickly find a specific passage.
This feature allows you slowly to repeat scenes containing sports, dancing, musical instruments being
played etc., so you can study them more closely.
Allows playback of the film from a desired time. You must enter the starting time as a refer-
ence.The time search function does not operate on some disc.
When playing a DVD
Refers to the language of the film soundtrack. In the example, the soundtrack is played in
English 5.1CH. A DVD disc can have up to eight different soundtracks.
1. During play, press the PAUSE (∏∏) button.
2. Press the SEARCH (k/K) button to choose the play speed between 1/2, 1/4, 1/8 and 1/16 of normal dur-
ing PAUSE mode.
Refers to the subtitle languages available in the disc. You will be able to choose the subtitle languag-
es or, if you prefer, turn them off from the screen. A DVD disc can have up to 32 different subtitles.
E
Z
User will be able to choose EZ-View type.
Press enter to activate the Zoom function.
Advanced functions
Adjusting the Aspect Ratio (EZ View)
To access the desired Angle function.
Some DVD disc are have more than one recorded angle.
To play back using aspect ratio (DVD)
1. During play, press the EZ VIEW button on the remote control.
2. Press the EZ VIEW or π/† buttons to select the screen size. Each time you press the EZ VIEW or π/†
buttons, the screen size changes. For graphics of the screen sizes and lists of the sequences in which the
sizes change, see the next column.
Using the Disc and Title Menu
During the playback of a DVD disc, press the DISC MENU/TITLE MENU button on the remote control.
3. Press the EXIT button to exit EZ View.
Note
-
-
-
Depending on a disc, the Disc Menu/ Title Menu may not work.
If you are using a 16:9 TV
If you are using a 4:3 TV
You can also use the Disc Menu, using the DISC MENU button on the remote control.
Title Menu will only be displayed if there are at least two titles in the disc.
For 16:9 aspect ratio discs
- WIDE SCREEN TV
- SCREEN FIT
For 16:9 aspect ratio discs
- 4:3 Letter Box
- 4:3 Pan Scan
- ZOOM FIT
- SCREEN FIT
Repeat Play
- ZOOM FIT
For 4:3 aspect ratio discs
- Normal Wide
Repeat the current track, chapter, title, a chosen section (A-B), or all of the disc.
When playing a DVD/VCD
For 4:3 aspect ratio discs
- Normal Screen
- SCREEN FIT
- SCREEN FIT
- ZOOM FIT
1. Press the REPEAT button on the remote control. Repeat screen appears.
- Vertical Fit
- ZOOM FIT
2. Press the REPEAT or π/† buttons to change playback mode. DVD repeats play by chapter or title
-
-
-
Chapter : repeats the chapter that is playing.
Title : repeats the title that is playing.
Off.
Note
This function may behave differently depending on the type of disc.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Recalling a Marked Scene
Selecting the Audio Language
1. During play, press the MARKER button on the remote control.
2. Press the √/® orπ/† buttons to select a marked scene.
3. Press the PLAY () button to skip to the marked scene.
You can select a desired audio language quickly and easily with the AUDIO button.
Using the AUDIO button (DVD/VCD/MPEG4)
Clearing a Bookmark
1. During play, Press the AUDIO button. Change the audio language by pressing the AUDIO or π/† button.
- The audio languages are represented by abbreviations.
1. During play, press the MARKER button on the remote control.
2. Press the √/® orπ/† buttons to select the bookmark number you want to delete.
3. Press the ENTER button to delete a bookmark number.
2. To remove the AUDIO icon, press the EXIT button.
Note
-
-
This function depends on audio languages are encoded on the disc and may not work.
A DVD disc can contain up to 8 audio languages.
Using the Zoom Function
Using the Zoom Function (DVD/VCD)
Selecting the Subtitle Language
1. During play or pause mode, press the TOOLS or ZOOM buttons on the remote control.
You can select a desired subtitle quickly and easily with the SUBTITLE button.
2. Press the π/† buttons to select
icon, then press the ENTER button to zoom in X1,X2,X3,X4.
Using the SUBTITLE button (DVD/MPEG4)
1. During play, Press the SUBTITLE button.
Clips Menu for MP3/WMA/JPEG/MPEG4/CD Audio
2. Press the SUBTITLE or π/† button to change the language. Each time you press the SUBTITLE or
π/† button, the language changes.
CD Audio or discs with MP3/WMA/JPEG/MPEG4 contain individual songs and/or pictures that can be
organized into folders as shown below. They are similar to how you
3. To remove the SUBTITLE icon, press the EXIT button.
Videos
\
1/2
Pages
use your computer to put files into different folders.
Note
To go access these folders and the files in them, follow these steps :
-
-
-
-
The subtitle languages are represented by abbreviations.
1. Open the disc tray. Place the disc on the tray.
You have to change the desired subtitle in the Disc Menu, according to discs. Press the DISC MENU button.
This function depends on what subtitles are encoded on the disc and may not work on all DVDs.
2. Close the tray. The tray closes and the Parent Folder Menu screen
appears (top screen image.) Parent folders contain all the Peer folders that
have the same kind of content: music, video, photos, etc.
CD
Pages
Move
Return
A
DVD disc can contain up to 32 subtitle languages.
3. Press the √/® buttons to select the Parent folder of your choice, and then press the ENTER. A screen
displaying the Peer folders appears. The Peer folders contain all the folders with the same kind of content
(video, music, photos, etc.) that are in the Parent folder.
Changing the Camera Angle
When a DVD contains multiple angles of a particular scene, you can use the ANGLE function.
Using the ANGLE function (DVD)
Folder Selection
If the disc contains multiple angles, the ANGLE appears on the screen.
1. During play, press the TOOLS button on the remote control.
The folder can be selected both in Stop or Play mode.
2. Press the π/† buttons to select
the remote control to select the desired angle option.
icon. When the angle screen is displayed, press the √/® buttons on
-
To select the Parent Folder
Press the RETURN button to go to parent folder, or press the π/† buttons to select “..” and press ENTER to
go to the parent folder.
Using the Bookmark Function
-
-
To select the Peer Folder
Press the π/† buttons to select the desired folder, then press ENTER.
This feature lets you bookmark sections of a DVD or VCD (Menu Off mode) so you can quickly find them
at a later time.
To select the Sub-Folder
Press the π/† buttons to select the desired folder, then press ENTER.
Using the Bookmark Function (DVD/VCD)
1. During play, press the MARKER button on the remote control.
2. When you reach the scene you want to mark, press the √/® or π/† buttons, and then press MARKER
button. Up to 12 scenes may be marked at a time.
MP3/WMA/CD Audio Playback
1. Open the disc tray. Place the disc on the tray. Close the tray.
2. Press the √/® buttons to select a Menu Music then press ENTER. Press the π/† buttons to select a
Note
-
Depending on a disc, the Bookmark function may not work.
song file then press the ENTER Press the π/† buttons to begin playback of the song file then press
.
ENTER.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Repeat/Random playback
Repeat and Repeat A-B playback
Press the REPEAT button to change the playback mode. There are four modes, such as Off, Track,
Folder and Random.
1. Press the REPEAT button , then press REPEAT or π/† buttons to change playback mode. There
are 3 modes, such as Off, Folder and Title.
- Folder : repeats the AVI files which have the same extension in the current folder.
- Title : repeats the title that is playing.
- Off : No Repeat mode.
- Off
- Track
- Folder
- Random
(
): Normal Playback
1
(
)
: Repeats the current song file.
: Repeats the song files which have the same extension in the current folder.
: Song files which have the same extension will be played in random order.
(
)
2. Press the REPEAT A-B button on the remote control.
(
)
3. Press the REPEAT A-B button to set the point where you want repeat play to start (A).
To resume normal play, press the REPEAT button until Repeat : Off.
CD-R MP3/WMA file
4. Press the REPEAT A-B button again at the point where you want the repeat play to stop (B).
- To return to normal play, press the REPEAT A-B button until the display shows Repeat : Off
.
When you record MP3 or WMA files on CD-R, please refer to the following.
Note
-
-
Your MP3 or WMA files should be ISO 9660 or JOLIET format.
A-B REPEAT allow you to set point (B) directly after point (A) has been set.
ISO 9660 format and Joliet MP3 or WMA files are compatible with Microsoft's DOS and Windows, and with
Apple's Mac. This format is the most widely used.
MPEG4 Function Description
-
When naming your MP3 or WMA files, do not exceed 8 characters, and enter “.mp3, .wma” as the file
extension.
Function
Description
During play, press the |k or K| button, it moves to next or previous track.
Skip
(|k or K|)
Search
General name format : Title.mp3. or Title.wma. When composing your title, make sure that you use 8 charac-
ters or less, have no spaces in the name, and avoid the use of special characters including: (.,/,\,=,+).
Use a decompression transfer rate of at least 128 Kbps when recording MP3 files.
Sound quality with MP3 files basically depends on the rate of compression/decompression you choose.
Getting CD audio sound requires an analog/digital sampling rate, that is conversion to MP3 format, of at least
128 Kbps and up to 160 Kbps. However, choosing higher rates, like 192 Kbps or more, only rarely give better
sound quality. Conversely, files with decompression rates below 128 Kbps will not be played properly.
Use a decompression transfer rate of at least 64Kbps when recording WMA files.
Sound quality with WMA files basically depends on the rate of compression/decompression you choose.
Getting CD audio sound requires an analog/digital sampling rate, that is conversion to WMA format, of at
least 64Kbps and up to 192Kbps. Conversely, files with decompression rates below 64Kbps or over 192Kbps
will not be played properly. Sampling rate that can be supported for WMA files is > 30Khz.
Do not try recording copyright protected MP3 files.
-
-
During play, press the SEARCH (k or K) button and press again to search at a faster
(k or K)
speed. Allows you to search at a faster speed in an AVI file. (2X, 4X, 8X, 16X, 32X)
Slow Motion Play
Allows you to search at a slower speed in an AVI file. (1/2, 1/4, 1/8, 1/16)
X1/X2/X3/X4/Normal in order
ZOOM
- These functions may not work depending on MPEG4 file.
CD-R AVI fileThis
Possible warning messages that may appear when
unit can play the following video compression formats
within the AVI file format:
trying to play DivX/AVI files are :
- DivX 3.11 contents
-
-
1. No Authorization
- DivX 4 contents (Based on MPEG-4 Simple Profile)
- DivX 5 contents (MPEG-4 simple profile plus addi
tional features such as bi-directional frames. Qpel
and GMC are also supported.)
Certain "secured" files are encrypted and code protected to prevent illegal copying. These files are of the fol-
lowing types: Windows MediaTM (registered trade mark of Microsoft Inc) and SDMITM (registered trade mark of
The SDMI Foundation). You cannot copy such files.
-
File with bad registration code.
2. Unsupported Codec
Files with certain Codec Types, Versions
-
Important:
(ex. MP4, AFS and other proprietary codecs)
are not suppoerted by this player.
- XviD MPEG-4 compliant Contents.
The above recommendations cannot be taken as a guarantee that the DVD player will play MP3 recordings,
or as an assurance of sound quality. You should note that certain technologies and methods for MP3 file
recording on CD-Rs prevent optimal playback of these files on your DVD player (degraded sound quality and
in some cases, inability of the player to read the files).
3. Unsupported Resolution
DVD-RW & DVD+R
-
Files containing resolutions higher than the
player’s specification are not supported.
Format that support for DivX file :
- Basic DivX format DivX3.11 / 4.12/ 5.x
-
This unit can play a maximum of 500 files and 500 folders per disc.
-
-
Xvid (MPEG-4 compliant video codec) and DivX Pro
File format : *.avi, *.div, *.divx.
Note
•
The resolution that can be supported by
MPEG4 Playback (Only DVD-C550/DVD-C550K)
This unit supports all resolutions up to maximum
below.
DVD-C550/C550K model up to 720 x 480
@30 frames/ 720 x 576 @25 frames.
This unit supports CD-R/RW written in
MPEG4 in accordance with the “ISO9660
format”.
MPEG4 Play Function
AVI files are used to contain the audio and video data. Only AVI format files with the “.avi” extensions can
be played.
•
DivX5
720 x 480 @30fps
1. Open the disc tray. Place the disc on the tray. Close the tray
2. Press the √/® buttons to select a Videos Menu , then press the ENTER. Press the π/† to select an avi file
(DivX/XviD) then press the ENTER Press the π/† and then press the ENTER button.
.
720 x 576 @25fps:
Maximum bitrate : 4Mbps
.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing Media Files Using the USB Host feature
(Only DVD-C550/DVD-C550K)
CD Ripping (Only DVD-C550/DVD-C550K)
This feature allows you to copy audio files from a disc to a USB device in MP3 format.
Open the dics tray. Place the Audio CD(CD DA) disc on the tray, and close the tray. Connect the USB device to
the USB port on the front of the unit. Press the DVD button.
You can enjoy the media files such as pictures, movies and tunes saved in an MP3 player, USB memory
or digital camera in high audio by connecting the storage device to the USB port of the DVD Player.
1. Press the TOOLS button to display the Ripping screen.
2. Press the π/† buttons, then press the ENTER button to select files for ripping.
Using the USB HOST feature
1. Connect the USB device to the USB port on the front of the unit.
2. The USB Menu screen appears. Press the √/® button to select Menu, then press ENTER.
3. Press the π/† buttons to select a file in the USB device. Press ENTER to Open the file.
-
To deselect files, press ENTER button again.
3. Press the √ and button to select START, then press the ENTER button begin ripping.
The Ripping menu contain the following buttons :
†
-
-
Mode (Fast/Normal)
Bitrate, press ENTER to change : 128kbps ➞ 192kbps ➞ 128kbps ...
• Standard : 128kbps
• Better Quality : 192kbps
Device selection, press ENTER to change between partitions on the USB device (max 4).
Select - Unselect, press ENTER to change from Select all (files) or Select none.
Note
Each time the USB button on the remote control is pressed, a frame of the USB device selection will appear.
“USB” appears on the display screen.
•
•
•
•
•
Depends on the file size and clip duration, loading time on USB may take longer than using CD or DVD media.
USB MENU screen appears on the TV screen and the saved file is played.
-
-
If there is a Disc in the unit, pressing the DVD button will make the player exit the USB menu and load the disc.
Safe USB Removal
Note
-
-
-
-
-
-
-
To cancel copying in progress, press the ENTER button.
To return to CDDA screen, press the TOOLS button again.
When the CD ripping being processed the player will automatic in play mode.
Ripping process is 2.6 times of normal speed.
Only the Audio CD (CD DA) dics can be ripping.
The USB button does not work while you’re in the Ripping menu.
CD ripping function may not supported for some MP3 players device.
1. Press the DVD button to return to disc mode or the main screen.
2. Press the STOP (■) button
3. Remove the USB cable.
Skip Forward/Back
During playback, press the
•
•
(
|k/K|
When there is more than one file, when you press the K| button, the next file is selected.
When there is more than one file, when you press the |k button, the previous file is selected.
)
button.
Fast playback
Picture CD Playback
To play back the disc at a faster speed, press (k/K) during playback.
•
Compatible Devices
Each time you press either button, the playback speed will change as follows : 2X ➞ 4X ➞ 8X ➞ 16X ➞ 32X.
1. Select the desired folder.
2. Press the π/† buttons to select a Picture file in the clips menu and then press the ENTER button.
1. USB devices that support USB Mass Storage v1.0. (USB devices that operate as a removable disk in
Windows (2000 or later) without additional driver installation.)
2. MP3 Player: Flash type MP3 player.
Note
- Press the STOP button to return to the clips menu.
3. Digital camera: Cameras that support USB Mass Storage v1.0.
- When playing a Kodak Picture CD, the unit displays the Photo directly, not the clips menu.
•
Cameras that operate as a removable disk in Windows (2000 or later) without additional driver installation.
4. USB Flash Drive: Devices that support USB2.0 or USB1.1.
You may experience a difference in playback quality when you connect a USB1.1 device.
5. USB card Reader: One slot USB card reader and Multi slot USB card reader
Rotation
•
-
-
-
-
Press the TOOLS button to select Rotate, and then press the ENTER button.
Each time the √/® buttons are pressed, the picture rotates 90 degrees clockwise.
Each time the π button is pressed, the picture will reverse to the upside down to show a mirror image.
Each time the † button is pressed, the picture will reverse to the right side to show a mirror image.
•
•
Depending on the manufacturer. the USB card reader may not be supported.
If you install multiple memory devices into a multi card reader, you may experience problems.
6. If you use a USB extension cable, the USB device might not be recognized.
Zoom
•
•
CBI (Control/Bulk/Interrupt) is not supported.
Digital Cameras that use PTP protocol or require additional program installation when connected to a PC are
not supported.
A device using NTFS file system is not supported. (Only FAT 16/32 (File Allocation Table 16/32) file system is
supported.)
Some MP3 players, when connected to this product,may not operate depending on the sector size of their
file system.
The USB HOST function is not supported if a product that transfers media files by its manufacturer-specific
program is connected.
Does not operate with Janus enabled MTP (Media Transfer Protocol) devices.
The USB host function of this product does not support all USB devices.
-
-
Press the TOOLS button to select Zoom, and then press the ENTER button.
Each time ENTER button is pressed, the picture is enlarged. Zoom mode : X1-X2-X3-X4-X1.
Slide Show
When youpress the PLAY at JPEG file, it will go tofull screen mode and automatically slideshow.
•
•
•
-
Note
Depending on a file size, the amount of time between each picture may be different from the
manual.
- If you don’t press any button, the slide show will start automatically in about 8 seconds by default.
-
•
•
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Picture CD Playback for HD-JPEG
Karaoke functions (Only DVD-C550K)
Karaoke Functions
Must connect to HDMI. Resolution should be 720p/1080i/ 1080p.
1. Select the desired folder.
2. Press the π/† buttons to select a Picture file in the clip menu and then press the ENTER button.
Operation Sequence
•
•
Press the STOP (■) button to return to the clips menu.
When playing a Kodak Picture CD, the unit displays the Photo directly, not the clips menu.
1. Connect the Mixed Audio Out terminals with the TV or Amplifier.
•
Rotation
Press the TOOLS button to select Rotate, and then press the ENTER button. Press the √/® button to
2. Connect Mic into Mic jack. When a MIC is connected, the karaoke functions can be used.
rotate the screen 90 degrees to the left/right.
Mic Volume and Key Control
•
•
Skip Picture
Press the |k or K| button to select previous or next picture.
Slide Show
1. Playback the Karaoke Disc containing the wanted songs.
- Press the KARAOKE (†) button, and then press π/† to select VOL or KEY.
2. Press the √/® buttons to change the desired item.
Press the PLAY (®) button to start SLIDE function.
Press the PAUSE (∏∏) button to stop SLIDE function.
Note
Note
- If you hear feedback(squealing or howling) while using the karaoke feature, move the microphone
away from the speakers or turn down the microphone volume or the speaker volume.
- When playing MP3, WMA, DTS and LPCM disc, the karaoke functions will not operate.
- When the MIC is connected, Digital Out does not work.
-
-
-
Depending on a file size, the amount of time between each picture may be different from the set
interval time.
The image may be displayed at a smaller size depending on the picture size when displaying
images in HD-JPEG mode.
It is recommended to set the "BD Wise" to "Off" In case of playback JPEG image file bigger
than 720X480 pixel size.
- The MIC sound outputs only from Analog Audio Out.
- If MIC is connected to the MIC jack on the front panel, 5.1CH audio will be changed in to 2 CH audio
automatically, this condition can’t be change unless the MIC is plugged out.
MP3-JPEG Playback
You can play JPEG using music as a backgound.
1. Press the π/† buttons to select an MP3 file in the clips menu and then press the ENTER button.
To return to the menu screen, Press the RETURN or MENU buttons.
Changing setup menu
Using the Setup Menu
2.
Press the √/® buttons to select Photos Menu, and then press the ENTER button.
Press the π/† buttons to select a JPEG file in the clips menu and then press the ENTER button.
- Music will play from the beginning
3. Press Stop button when you want to stop the playback.
The Setup menu lets you customize your DVD player by allowing you to select various language prefer-
ences, set up a parental level, even adjust the player to the type of television screen you have.
Note
MP3 and JPEG files have to be on the same disc.
1. With the unit in Stop mode, press the MENU button on the remote control. Press the √/® buttons to select
CD-R JPEG Disc
SETTINGS, then press the ENTER button.
-
-
-
-
Only files with the “.jpg” and “.JPG” extensions can be played.
2. Press the π/† buttons to select a Setup Menu, then press the
®
or ENTER to bring up the sub-menu.
or ENTER.
If the disc is not closed, it will take longer to start playing and not all of the recorded files may be played.
Only CD-R discs with JPEG files in ISO 9660 or Joliet format can be played.
The name of the JPEG file may not be longer than 8 characters and should contain no blank spaces or spe-
cial characters (. / = +).
3. Press the π/† buttons to select a sub-menu option, then press the
®
4. To make the setup screen disappear after setting up, press the RETURN button.
-
Only a consecutively written multi-session disc can be played. If there is a blank segment in the multi-session
disc, the disc can be played only up to the blank segment.
Setting Up the Display Options
-
-
-
-
-
-
-
-
-
A maximum of 500 images can be stored on a single CD.
Kodak Picture CDs are recommended.
Display options enable you to set various video functions of the player.
When playing a Kodak Picture CD, only the JPEG files in the pictures folder can be played.
Kodak Picture CD: The JPEG files in the pictures folder can be played automatically.
Konica Picture CD: If you want to see the Picture, select the JPEG files in the clips menu.
Fuji Picture CD: If you want to see the Picture, select the JPEG files in the clips menu.
QSS Picture CD: The unit may not play QSS Picture CD.
1. With the unit in Stop mode, press the MENU button. Press the √/® buttons to select SETTINGS, then
press the ENTER button.
2. Press the π/† buttons to select DISPLAY, then press the
®
or ENTER button.
or ENTER button.
If the number of files in 1 Disc is over 500, only 500 JPEG files can be played.
If the number of folders in 1 Disc is over 500, only JPEG files in 500 folders can be played.
3. Press the π/† buttons to select the desired item, then press the
®
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Up the BD Wise
The default settings : FRONT L, R (Small), CENTER (Small), SURROUND (Small). Select the size of the speakers
to be connected.
When the player is connected to a SAMSUNG TV which supports “BD Wise”, you can enjoy optimized
Picture Quality by setting the “BD Wise” function as “On”.
❶
Front (FL, FR)
- Large
1. With the unit in Stop mode, press the MENU button. Press the √/® buttons to select SETTINGS, then
- Small
press the ENTER button.
2. Press the π/† buttons to select DISPLAY, then press the
®
®
or ENTER button.
❷
Center
- None
- Large
- Small
3. Press the π/† buttons to select BD WISE, then press the
or ENTER button.
Press the π/† buttons to select ON/OFF, then press the ENTER button.
Note
❸
Surround (SL, SR)
- None
•
•
This option can be changed only when TV support BD Wise.
The TV Output will display no image color if the setting of the DVD Player Setup Menu
does not follow the TV System Table as above.
- Large (Rear/Side)
- Small (Rear/Side)
•
Consult your TV User’s Manual to find out if your TV supports Progressive Scan. If
Progressive Scan is supported, follow the TV User’s Manual regarding Progressive Scan set-
tings in the TV’s menu system.
Setting up Test
The test output signals come clockwise starting from the Front Speaker(L).
Adjust Channel Balance so that speakers output equally in your room.
FRONT(L) ➝ CENTER ➝ SUBWOOFER ➝ FRONT(R) ➝ SURROUND(R) ➝ SURROUND(L)
•
•
If Video Output is set incorrectly, the screen may be blocked.
The resolutions available for HDMI output depend on the connected TV or projector. For
details, see the user’s manual of your TV or projector.
•
•
•
When the resolution is changed during playback, it may take a few seconds for a normal
image to appear.
Note
If you set the HDMI output resolution 720p,1080p or 1080i, HDMI output provides better picture
quality.
-
When play disc that have MPEG Audio at bitstream selection, the coaxial may not have Audio
output its depend on the AV Receiver.
It is recommended to set the "BD Wise" to "Off" In case of playback JPEG image file bigger than
720 X 480 pixel size.
-
-
There is no analog audio output when you play a DTS sound disc.
Even when PCM Down sampling is Off
•
Some discs will only output down sampled audio through the digital outputs.
Setting Up the Audio Options
HDMI
Audio Options allows you to setup the audio device and sound status settings depending on the audio
system in use.
-
If your TV is not compatible with compressed multi-channel formats (Dolby Digital, DTS,
MPEG), you should set Digital Audio to PCM.
1. With the unit in Stop mode, press the MENU button. Press the √/® buttons to select SETTING, then
press the ENTERS button.
-
If your TV is not compatible with LPCM sampling rates over 48kHz, you should set PCM Down
sampling to On.
2. Press the π/† buttons to select AUDIO, then press the ® or ENTER button.
3. Press the π/† buttons to select the desired item, then press the
®
or ENTER button.
Surround Sound Speaker Setup (Only DVD-C550K)
Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trade-
marks of Dolby Laboratories.
1. With the unit in Stop mode, press the MENU button. Press the √/® buttons to select SETTINGS, then
press the ENTER button.
2. Press the π/† buttons to select AUDIO, then press the
3. Press the π/† buttons to select SPEAKER SETUP, then press the
4. Press the π/†/√/® buttons to select the desired item, then press the ENTER button to set the speaker.
®
or ENTER button.
“DTS” and “DTS Digital Out” are trademarks of Digital Theater Systems, Inc.
®
or ENTER button.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Up the System Options
Note
- The language is selected and the screen returns to Language Setup menu.
- To make the setup menu disappear, press the MENU button.
- If the selected language is not recorded on the disc, the original pre-recorded language is selected.
- Select “Original” if you want the default soundtrack language to be the original language the disc is
recorded in.
1. With the unit in Stop mode, press the MENU button. Press the √/® buttons to select SETTINGS, then
press the ENTER button.
2. Press the π/† buttons to select SYSTEM, then press the
®
or ENTER button.
or ENTER button.
3. Press the π/† buttons to select the desired item, then press the
®
- Select “Automatic” if you want the subtitle language to be the same as the language selected as the
audio language.
Setting Up the Anynet+(HDMI-CEC)
Anynet+ is a function that can be used to operate the unit using a Samsung TV remote control, by con-
necting the DVD C500/C550/C550K to a SAMSUNG TV using a HDMI Cable. (This is only available with
SAMSUNG TVs that support Anynet+.
- Some discs may not contain the language you select as your initial language; in that case the disc will
use its original language setting.
Select On when you connect the DVD C500/C550/C550K with Samsung TV that support Anynet+.
Setting Up the Security Options
1. With the unit in Stop mode, press the MENU button. Press the √/® buttons to select SETTINGS, then
press the ENTER button.
The Parental Control function works in conjunction with DVDs that have been assigned a rating, which
helps you control the types of DVDs that your family watches. There are up to 8 rating levels on a disc.
2. Press the π/† buttons to select SYSTEM, then press the
®
or ENTER button.
3. Press the π/† buttons to select ANYNET+ (HDMI-CEC), then press the ENTER button.
4. Set the Anynet+(HDMI-CEC) to “On” on your DVD Player, then press the ENTER button.
5. Set the Anynet+ function at your TV. (See the TV instruction manual for more information.).
Setting Up the Rating Level and Changing the Password
1. With the unit in Stop mode, press the MENU button. Press the √/® buttons to select SETTINGS, then
press the ENTER button.
•
When you press Anynet+ button on the TV remote control, the below OSD will appear.
2. Press the π/† buttons to select SECURITY, then press the
®
or ENTER button. Enter your password.
3. Press the π/† buttons to select PARENTAL/CHANGE PASSWORD, then press the ® or ENTER button
4. Press the π/† buttons to select rating level you want, then press the ENTER button.
e.g) Setting up in KID SAFE
.
Note
• By pressing the PLAY button of the unit while watching TV, the TV screen will change to the play screen.
• If you play a DVD when the TV power is off, the TV will power On.
-
For example, if you select the Kids Safe level, discs that contain level 2 or higher will not play.
5. Enter your password. If this is the first time, enter 0000. Then, enter a new password. The new pass-
word must be a number other than 0000 to activate the parental control function. Then, re-enter the new
password.
• If you turn the TV off , the DVD Player will power off automatically.
• If you change the HDMI to other sources (Composite,Component,... etc) in TV while playing the DVD disc, the
DVD Player will stop playing.
Note
❶ KID SAFE
Setting Up the Language Features
❷ G (General Audiences) : All ages Admitted.
❸ PG (Parental Guidance suggested) : Some material may not be suitable for young children.
If you set the player menu, disc menu, audio and subtitle language in advance, they will come up auto-
matically every time you watch a movie.
❹
❺
PG 13 (PG-13 Parents strongly cautioned): Some material may be inapproriate for children under 13.
PGR (Parental Guidance Reccommended) : These are not necessarily unsuitable for children, but viewer dis-
cretion is advised, and parents and guardians are encouraged to supervive younger viewers.
1. With the unit in Stop mode, press the MENU button. Press the √/® buttons to select SETTINGS, then
press the ENTER button.
❻ R (Restricted): Under 17 requires accompanying adult.
❼ NC17 (NC-17): No one 17 and under admitted.
❽ ADULT
2. Press the π/† buttons to select LANGUAGE, then press the
®
or ENTER button.
3. Press the π/† buttons to select the desired language, then press the ENTER button.
- If you have forgotten your password, see “Forgot Password” in the Troubleshooting Guide.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Up the General Options
Reference
1. With the unit in Stop mode, press the MENU button. Press the √/® buttons to select SETTINGS, then
Troubleshooting
press the ENTER button.
Before requesting service (troubleshooting), please check the following.
2. Press the π/† buttons to select GENERAL, then press the
®
or ENTER button.
or ENTER button.
3. Press the π/† buttons to select the desired item, then press the
®
Problem
Action
•
5.1 channel sound is reproduced only when the following conditions are met. :
1) The DVD player is connected with the proper Amplifier.
2) The disc is recorded with 5.1 channel sound.
Setting Up the Support Options
5.1 channel sound is not
being reproduced.
(DVD-C550K)
Support option enable you to check your DVD player information such as the model code, Software
Version, The serial and version numbers can be found on the back side of your DVD-Player.
•
•
•
Check whether the disc being played has the "5.1 ch" mark on the outside.
Check if your audio system is connected and working properly.
In a SETUP Menu, is the Audio Output set Bitstream?
1. With the unit in Stop mode, press the MENU button. Press the √/® buttons to select SETTINGS, then
press the ENTER button.
2. Press the π/† buttons to select SUPPORT, then press the
®
or ENTER button.
•
•
Press the
■
/®|| button (in front panel) for more than 5 seconds under no
The screen is blocked.
Forgot password.
3. Select PRODUCT INFORMATION, then press the or ENTER button.
®
disc inside. All setting will revert to factory settings.
Press the
■/®|| button (in front panel) for more than 5 seconds under no
disc inside. All setings including the password will revert to the factory
settings. Don't use this unless absolutely necessary.
•
•
•
Check the Video output is HDMI enabled.
No HDMI output
Check the connection between the TV and the HDMI jack of DVD player.
See if the TV supports this 480p/ 576p/720p/1080i/1080p DVD player.
Abnormal HDMI output
screen.
•
If snow noise appears on the screen, it means that TV does not
support HDCP (High-bandwidth Digital Content Protection).
•
•
Check your TV system setup correctly.
The screen Jitter phenomenon may occur when frame rate is converted from 50Hz to
60 Hz for 720p/1080i/ 1080p HDMI (High Definition Multimedia Interface) Output.
Please refer to the user's manual of your TV.
HDMI output Jitter
•
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Spesifications
Memo
Power Requirements
Power Comsumption
AC110~240V, 50/60Hz
6W
DVD-C500 : 1.2 Kg
DVD-C550/DVD-C550K : 1.5 Kg
Weight
DVD-C500 :
General
360mm(W) X 207mm(D) X 42mm(H)
Dimensions
DVD-C550/DVD-C550K :
430mm(W) X 207mm(D) X 42mm(H)
Operating Temperature Range
Operating Humidity Range
Composite Video
+5ºC to +35ºC
10 % to 75 %
1 channel : 1.0 Vp-p (75 Ω load)
Y : 1.0 Vp-p (75 Ω load)
Pr : 0.70 Vp-p (75 Ω load)
Pb : 0.70 Vp-p (75 Ω load)
Video Output
Component Video
HDMI
480p, 576p, 720p, 1080p, 1080i
RCA
Output terminal
Maximum Output Level
Frequency Response
Digital Audio Out
2Vrms
Audio Output
20 Hz to 20 kHz
Coaxial terminal (S/PDIF)
F/L, F/R, R/L, R/R, CT, S/W
5.1 Channel (DVD-C550K)
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Memo
Download from Www.Somanuals.com. All Manuals Search And Download.
$POUBDUꢀ4".46/(ꢀ803-%ꢀ8*%&
*GꢀZPVꢀIBWFꢀBOZꢀRVFTUJPOTꢀPSꢀDPNNFOUTꢀSFMBUJOHꢀUPꢀ4BNTVOHꢀQSPEVDUTꢁꢀQMFBTFꢀDPOUBDUꢀUIFꢀ4".46/(ꢀDVTUPNFSꢀDBSFꢀDFOUFSꢂ
Region
Area
Contact Center
1-800-SAMSUNG (726-7864)
ꢀ
Web Site
Canada
www.samsung.com/fi
North America Mexico
U.S.A
01-800-SAMSUNG (726-7864)
1-800-SAMSUNG (726-7864)
0800-333-3733
0800-124-421, 4004-0000
800-SAMSUNG (726-7864)
00-1800-5077267
800-7919267
0-800-507-7267
1-800-10-7267
800-6225
1-800-299-0013
1-800-234-7267
800-7267
1-800-682-3180
1-800-751-2676
1-800-SAMSUNG (726-7864)
0-800-100-5303
01-8000112112
Argentine
Brazil
Chile
Nicaragua
Honduras
Costa Rica
Ecuador
El Salvador
Guatemala
Jamaica
Latin America
Panama
Puerto Rico
Rep. Dominica
Trinidad & Tobago
Venezuela
Colombia
Belgium
02 201 2418
Czech Republic
Denmark
Finland
800-SAMSUNG (800-726786)
8-SAMSUNG (7267864)
30-6227 515
France
01 4863 0000
Germany
Hungary
Italia
01805-SAMSUNG (726-7864 å 0,14/Min)
06-80-SAMSUNG (726-7864)
800-SAMSUNG (726-7864)
02 261 03 710
0900-SAMSUNG (0900-7267864) (å 0,10/Min)
3-SAMSUNG (7267864)
0 801 1SAMSUNG (172678), 022-607-93-33
80820-SAMSUNG (726-7864)
0800-SAMSUNG (726-7864)
902-1-SAMSUNG (902 172 678)
0771 726 7864 (SAMSUNG)
0845 SAMSUNG (7267864)
Luxemburg
Netherlands
Norway
Poland
Europe
Portugal
Slovakia
Spain
Sweden
U.K
Eire
Austria
0818 717 100
0810-SAMSUNG (7267864, å 0.07/min)
Switzerland
0848-SAMSUNG (7267864, CHF 0.08/min)
Russia
8-800-555-55-55
Kazakhstan
Uzbekistan
Kyrgyzstan
Tadjikistan
8-10-800-500-55-500
8-10-800-500-55-500
00-800-500-55-500
8-10-800-500-55-500
CIS
Ukraine
8-800-502-0000
Belarus
Moldova
Lithuania
Latvia
810-800-500-55-500
00-800-500-55-500
8-800-77777
8000-7267
800-7267
1300 362 603
0800 SAMSUNG (0800 726 786)
400-810-5858, 010-6475 1880
Estonia
Australia
New Zealand
China
Hong Kong
3698-4698
India
Indonesia
Japan
3030 8282, 1800 110011, 1800 3000 8282
0800-112-8888
0120-327-527
Asia Pacific
Malaysia
1800-88-9999
1-800-10-SAMSUNG (726-7864), 1-800-3-SAMSUNG (726-7864),
1-800-8-SAMSUNG (726-7864), 02-5805777
1800-SAMSUNG (726-7864)
1800-29-3232, 02-689-3232
0800-329-999
1 800 588 889
444 77 11
Philippines
Singapore
Thailand
Taiwan
Vietnam
Turkey
South Africa
U.A.E
Middle East &
Africa
0860-SAMSUNG (726-7864 )
800-SAMSUNG (726-7864), 8000-4726
AK68-01881A
Download from Www.Somanuals.com. All Manuals Search And Download.
|