SC-423
Cinema Loudspeaker System
Features
• Three-way selectable, bi or tri- amplified screen channel system
• MH-1063 provides 90° horizontal by +20° to -30° vertical coverage
• LF-4215 is constructed of MDF and is heavily braced
• Low-distortion waveguides provide highly articulate dialogue
• Shallow depth (20") facilitates installation
• THX™ approved for professional cinema applications
Developed specifically for the unique requirements
of professional motion picture playback, the SC-423
extends QSC’s commitment to the cinema market. As
a member of the DCS Digital Cinema Speaker Series,
the SC-423 is a three-way, selectable bi or tri-amplified
screen channel loudspeaker system comprised of two
main units—the MH-1063 mid-high frequency system
and the LF-4215 low-frequency system.
Specifications
Nominal Coverage
Frequency Range
SC-423
90° horizontal x +20 to -30° vertical
32 Hz - 16 kHz (-6 dB)
Crossover Frequency
250 and 1700 Hz, 24 dB per octave
LF-4215
4Ω
MH-1063
Impedance
8Ω
Sensitivity 1 watt/1 meter,
half space
99.5 dB
Bi-amp
105 dB
Tri-amp
MF 105 dB HF 107.5 dB
The MH-1063 mid-high system features a high
output, horn loaded 10" midrange cone driver and
a 2.5" (63mm) titanium diaphragm compression
driver mounted to an adjustable pan and tilt bracket.
The MH-1063 includes a driver protection network
and a passive crossover for bi-amp operation. Power
limiter circuitry protects the high-frequency driver
from overpowering. The MH-1063 provides extended
frequency coverage for the critical midrange band. A
high power 10" cone driver allows operation as low
as 250 Hz and the advanced phase plug coupling
permits a crossover point of up to 1800 Hz to the
high-frequency horn. This ensures that most of the
dialog range is reproduced by a single element, for
unmatched intelligibility.
Maximum Input Power1
8 hours of 6 db crest factor
IEC 268 noise spectrum
800 W RMS
1000 W RMS
250 W RMS2 275 W RMS 60 W RMS
passive
mid-high
2 hours of 6 db crest factor
pink noise, 50 Hz - 20 kHz,
AES method
350 W RMS
Recommended Amplifier Power 1600 W RMS maximum
800 W RMS maximum
Recommended Processing
Subsonic filter below 30 Hz,
> 18 dB per octave
4th order LR crossover at 200 and
1700 Hz via QSC DCM or QSControl.net
Connectors
Barrier strip screw terminals
accept up to #10 AWG
stranded wire
Barrier strip screw terminals
accept up to #10 AWG stranded wire
Transducers
Enclosure
Two 15" (381mm) high efficiency, 10" high efficiency mid range,
extended bass woofer featuring
4" copper voice coils
1.5" (38mm) exit, 2.5" titanium
diaphragm compression driver
The LF-4215 dual 15" (381mm) low-frequency
enclosure is designed specifically to address the
extended low-frequency response required for cinema
applications. The LF-4215 covers the frequency range
from 35 Hz to 250 Hz. Close Coupled Woofers (CCW),
with their tight spacing between woofers, improves
coupling and keeps coverage angles wide over a greater
frequency range than more widely spaced designs.
Quasi B4 alignment, ported
enclosure with fully flared ports,
symmetrical port design, tuned to 10° horizontal pan
36 Hz, constructed of MDF and
heavily braced. Features vandal
Tilt/Pan Bracket
10° vertical tilt
resistant woofer mounting bolts
Dimensions (HWD)
36" x 30" x 20.3"
39" x 30" x 20"
(910 mm x 762 mm x 516 mm)
(990 mm x 762 mm x 508 mm)
The SC-423 is designed for ease of installation.
The MH-1063 components come pre-assembled to
reduce field assembly time. Three bolts are all that
are required to secure the MH-1063 to the top of the
LF-4215 enclosure.
Weight - Net
System Weight
Baffle Cut-Out
172 lbs (78 kg)
257 lbs (117 kg)
76" x 32"
85 lbs (39 kg)
1) Maximum input power tested in accordance with IEC 268-5 recommendations, 50 Hz - 20 kHz band limiting, 6 dB signal crest factor.
2) Maximum input power tested in accordance with IEC 268-5 recommendations, 200 Hz - 2 kHz band limiting, 6 dB signal crest factor.
THX is a trademark of THX Ltd.
Download from Www.Somanuals.com. All Manuals Search And Download.
|