Samsung DVD Player DVD 1080P8 User Guide

DVD Player  
DVD-1080P8  
AK68-01503A-01  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Precautions  
This symbol indicates that  
This symbol indicates that there are  
important operating and  
maintenance instructions in the  
literature accompanying this unit.  
dangerous voltage consisting a risk  
of electric shock is present within  
this unit.  
Do not install this equipment in a confined space such as a bookcase or similar unit.  
WARNING : TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS  
APPARATUS TO RAIN OR MOISTURE.  
Note to CATV system installer : This reminder is provided to call CATV system installer’s attention to  
Article 820-40 of the National Electrical Code (Section 54 of Canadian Electrical Code, Part I) that  
provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be  
connected to the grounding system of the building as close to the point of cable entry as practical.  
Caution : FCC regulations state that any unauthorized changes or modifications to this equipment may  
void the user’s authority to operate it.  
• Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases,  
shall be placed on the apparatus.  
• If this power supply is used at 240V ac, a suitable plug adapter should be used.  
FCC NOTE (for U.S.A):  
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to  
Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful  
interference in a residential installation. This equipment generates, uses and can radiate radio frequency  
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to  
radio or television reception, which can be determined by turning the equipment off and on.  
The user is encouraged to try to correct the interference by one or more of the following measures.  
• Reorient or relocate the receiving antenna.  
• Increase the separation between the equipment and receiver.  
• Connect this equipment into an outlet on a circuit different from that to which the receiver is connected.  
• Consult the dealer or an experienced radio/TV technician for help.  
This class B digital apparatus meets all requirements of the Canadian Interference --  
Causing Equipment Regulations.  
CALIFORNIA USA ONLY :  
This Perchlorate warning applies only to primary CR (Maganese Dioxide) Lithium coin cells in the product sold  
or distributed ONLY in California USA “Perchlorate Material - special handling may apply , See  
CLASS 1  
LASER PRODUCT  
KLASSE 1 LASER PRODUKT  
LUOKAN 1 LASER LAITE  
KLASS 1  
LASER APPARAT  
PRODUCTO LÁSER CLASE 1  
ENG-3  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CAUTION  
THIS PRODUCT UTILIZES A LASER. USE OF CONTROLS OR ADJUSTMENTS OR  
PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN  
HAZARDOUS RADIATION EXPOSURE. DO NOT OPEN COVER AND DO NOT REPAIR  
YOURSELF. REFER SERVICING TO QUALIFIED PERSONNEL.  
Note:  
This unit can be used only where the power supply is AC 120V, 60Hz. It cannot be used elsewhere.  
• This DVD player is designed and manufactured to respond to the Region Management Information.  
If the Region number of a DVD disc does not correspond to the Region number of this DVD player,  
the DVD player cannot play the disc.  
• The product unit accompanying this user manual is licensed under certain intellectual property rights  
of certain third parties. In particular, this product is licensed under the following US patents:  
5,060,220 5,457,669 5,561,649 5,705,762 5,987,417 6,043,912 6,222,983 6,272,096 6,377,524  
6,377,531 6,385,587 6,389,570 6,408,408 6,466,532 6,473,736 6,477,501 6,480,829 6,556,520  
6,556,521 6,556,522 6,578,163 6,594,208 6,631,110 6,658,588 6,674,697 6,674,957 6,687,455  
6,697,307 6,707,985 6,721,243 6,721,493 6,728,474 6,741,535 6,744,713 6,744,972 6,765,853  
6,765,853 6,771,890 6,771,891 6 775,465 6,778,755 6,788,629 6,788,630 6,795,637 6,810,201  
6,862,256 6,868,054 6,894,963 6,937,552.  
This license is limited to private non-commercial use by end-user consumers for licensed contents.  
No rights are granted for commercial use. The license does not cover any product unit other than this  
product unit and the license does not extend to any unlicensed product unit or process conforming to  
ISO/IEC 11172-3 or ISO/IEC 13818-3 used or sold in combination with this product unit.  
The license only covers the use of this product unit to encode and/or decode audio files conforming  
to the ISO/IEC 11172-3 or ISO/IEC 13818-3. No rights are granted under this license for product  
features or functions that do not conform to the ISO/IEC 11172-3 or ISO/IEC 13818-3.  
Handling Cautions  
Before connecting other components to this player, be sure to turn them all off.  
• Do not move the player while a disc is being played, or the disc may be scratched or broken, and the player’s  
internal parts may be damaged.  
• Do not put a flower vase filled with water or any small metal objects on the player.  
• Be careful not to put your hand into the disc tray.  
• Do not place anything other than the disc in the disc tray.  
• Exterior interference such as lightning and static electricity can affect normal operation of this player.  
If this occurs, turn the player off and on again with the POWER button, or disconnect and then reconnect the  
AC power cord to the AC power outlet. The player will operate normally.  
• Be sure to remove the disc and turn off the player after use.  
• Disconnect the AC power cord from the AC outlet when you don’t intend to use the player for long  
periods of time.  
• Clean the disc by wiping in a straight line from the inside to the outside of the disc.  
• The Main plug is used as a disconnect device and shall stay readily operable at any time.  
Disc Storage  
Be careful not to harm the disc because the data on these discs is highly vulnerable to the environment.  
• Do not keep under direct sunlight.  
• Keep in a cool ventilated area.  
• Store vertically.  
• Keep in a clean protection jacket.  
Maintenance of Cabinet  
For safety reasons, be sure to disconnect the AC power cord from the AC outlet.  
• Do not use benzene, thinner, or other solvents for cleaning.  
• Wipe the cabinet with a soft cloth.  
ENG-4  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Before you start  
Accessories  
Remote  
Control  
Batteries for  
Remote Control  
(AAA Size)  
User’s Manual  
(AK68-01503A)  
RCA Phone  
Cable  
(AC39-42001U &  
AC39-22017Z)  
(AK59-00084J)  
(AC43-12002H)  
Install Batteries in the Remote control  
1
Open the battery  
cover on the back of  
the remote control.  
2
Insert two AAA batteries.  
Make sure that the  
polarities (+ and -) are  
aligned correctly.  
3
Replace the battery  
cover.  
If the remote control doesn’t operate properly:  
- Check the polarity + - of the batteries.  
- Check if the batteries are drained.  
- Check if the remote control sensor is blocked by obstacles.  
- Check if there is any fluorescent lighting nearby.  
ENG-5  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TABLE OF CONTENTS  
Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2  
Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3  
Before you start . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5  
Chapter 1: Setup  
General Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7  
Disc Type and Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8  
Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9  
Tour of the Remote Control. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11  
Chapter 2: Connections  
Connecting to a TV with an HDMI Jack . . . . . . . . . . . . . . . . . . . . . . . . . 12  
Connecting to a TV with a DVI Jack . . . . . . . . . . . . . . . . . . . . . . . . . . . 12  
Connecting to a TV (Progressive) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14  
Connecting to a TV (Interlace) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15  
Connecting to a TV (Video) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16  
Connecting to an Audio System (2 Channel Amplifier) . . . . . . . . . . . . . 17  
Connecting to an Audio System (Dolby Digital, MPEG2 or DTS Amplifier) . 18  
Chapter 3: Basic Functions  
Playing a Disc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19  
Using the Search and Skip Functions . . . . . . . . . . . . . . . . . . . . . . . . . . 21  
Using the Display Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22  
Using the Disc and Title Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23  
Using the Function Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24  
Repeat Play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25  
Slow Play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26  
Chapter 4: Advanced Functions  
Adjusting the Aspect Ratio (EZ View). . . . . . . . . . . . . . . . . . . . . . . . . . . 27  
Selecting the Audio Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29  
Selecting the Subtitle Language. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30  
Changing the Camera Angle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31  
Using the Instant Replay/Skip Function . . . . . . . . . . . . . . . . . . . . . . . . . 32  
Using the Bookmark Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33  
Using the Zoom Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35  
Clips Menu for MP3/WMA/JPEG/MPEG4/CD Audio . . . . . . . . . . . . . . . 36  
Folder Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36  
MP3/WMA/CD Audio Playback. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37  
MPEG4 Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39  
Picture CD Playback. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41  
Chapter 5: Navigating the Setup Menu  
Using the Setup Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43  
Setting Up the Language Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44  
Setting Up the Audio Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49  
Setting Up the Display Options. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51  
Setting Up the Parental Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54  
Setting Up Anynet+(HDMI-CEC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56  
Chapter 6: Reference  
Firmware Upgrade . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58  
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59  
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61  
ENG-6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 1  
SETUP  
Note  
General Features  
- Discs which cannot be played with this  
player.  
Excellent Sound  
• DVD-ROM  
• CD-ROM  
• CDI  
• DVD-RAM  
• CDV  
Dolby Digital, a technology developed by Dolby  
Laboratories, provides crystal clear sound  
reproduction.  
• CVD  
• Super Audio CD(except CD layer)  
• CDGs play audio only, not graphics.  
Screen  
Both regular and widescreen(16:9) pictures can be  
viewed.  
- Ability to play back may depend on recording  
conditions.  
Slow Motion  
An important scene can be viewed in slow motion.  
• DVD-R, +R  
• CD-RW  
1080p Playback  
This player upconverts regular DVDs for playback on  
1080p TVs.  
• DVD+RW, -RW (V mode)  
- The unit may not play certain CD-R, CD-RW  
and DVD-R due to the disc type or recording  
conditions.  
Parental Control (DVD)  
The parental control allows users to set the level  
necessary to prohibit children from viewing harmful  
movies such as those with violence, adult subject  
matter, etc.  
COPY PROTECTION  
Many DVD discs are encoded with copy  
Various On-Screen Menu Functions  
You can select various languages (Audio/Subtitle)  
and screen angles while enjoying movies.  
protection. Because of this, you should only connect  
your DVD player directly to your TV, not to a VCR.  
Connecting to a VCR results in a distorted picture  
from copy-protected DVD discs.  
Progressive Scan  
Progressive scanning creates an improved picture  
with double the scan lines of a conventional  
interlaced picture.  
This product incorporates copyright protection  
technology that is protected by methods claims of  
certain U.S. patents and other intellectual property  
rights owned by Macrovision Corporation and other  
rights owners. Use of this copyright protection  
technology must be authorized by Macrovision  
Corporation, and is intended for home and other  
limited viewing uses only unless otherwise authorized  
by Macrovision Corporation. Reverse engineering or  
disassembly is prohibited.  
EZ VIEW (DVD)  
Easy View enables picture adjustment to match your  
TV's screen size (16:9 or 4:3).  
Digital Photo Viewer (JPEG)  
You can view Digital Photos on your TV.  
Repeat  
You can repeat a song or movie simply by pressing  
the REPEAT button.  
PROGRESSIVE SCAN OUTPUTS  
(480p, 720p, 1080p)  
MP3/WMA  
This unit can play discs created from MP3/WMA files.  
“CONSUMERS SHOULD NOTE THAT NOT ALL HIGH  
DEFINITION TELEVISION SETS ARE FULLY  
COMPATIBLE WITH THIS PRODUCT AND MAY  
CAUSE ARTIFACTS TO BE DISPLAYED IN THE  
PICTURE, IF PROGRESSIVE SCAN PICTURE  
PROBLEMS OCCUR, IT IS RECOMMENDED THAT  
THE USER SWITCH THE CONNECTION TO THE  
‘STANDARD DEFINITION’ (VIDEO) OUTPUT. IF  
THERE ARE QUESTIONS REGARDING YOUR TV SET  
COMPATIBILITY WITH THIS DVD PLAYER, PLEASE  
CONTACT SAMSUNG'S CUSTOMER SERVICE  
CENTER.”  
Instant Replay (DVD)  
This function is used to replay the previous 10  
seconds of a movie from the current position.  
Instant Skip (DVD)  
This function skips playback ahead 10 seconds.  
MPEG4  
This unit can play MPEG4 formats within an avi file.  
HDMI (High Definition Multimedia  
Interface)  
HDMI reduces picture noise by allowing a pure  
digital video/audio signal path from the player to  
your TV.  
ENG-7  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SETUP  
Disc Type and Characteristics  
This DVD player is capable of playing the following types of discs with the corresponding logos:  
Recording Types  
Disc Size  
Max. Playing Time  
Characteristics  
Disc Types (Logos)  
-
-
DVD contains excellent sound and  
video due to Dolby Digital and  
MPEG-2 system.  
Single-sided 240 min.  
Double-sided 480 min.  
DVD  
5”  
Audio  
+
Various screen and audio functions  
can be easily selected through the  
on-screen menu.  
Video  
Single-sided 80 min.  
3 1/2”  
Double-sided 160 min.  
AUDIO-CD  
74 min.  
20 min.  
5”  
-
CD contains Digital content with better  
audio quality, less distortion and less  
deterioration of audio quality over time.  
Audio  
3 1/2”  
Disc Markings  
Region Number  
~
Play Region Number  
Both the DVD player and the discs are  
coded by region. These regional  
codes must match in order for the disc  
to play. If the codes do not match, the  
disc will not play.  
NTSC broadcast system in U.S.A, Canada, Korea,  
Japan, etc.  
NTSC  
Dolby Digital disc  
Stereo disc  
STEREO  
The Region Number for this player  
is described on the rear panel of the  
player.  
DIGITAL  
SOUND  
Digital Audio disc  
DTS disc  
MP3 disc  
DivX Certification  
DivX, DivX Certified,  
You must only insert one DVD disc at a time.  
Inserting two or more discs will not allow  
playback and may cause damage to the DVD  
player.  
and associated logos are  
trademarks of DivXNetworks, Inc and  
are used under license  
ENG-8  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SETUP  
Description  
Front Panel Controls  
1
2
3
4
8
6
5
7
1. DISC TRAY  
Place the disc here.  
6. STOP (  
)
Stops disc play.  
2. OPEN/CLOSE ( )  
Press to open and close the disc tray.  
7. SKIP ( ) / SEARCH  
Use to reverse skip a scene or music.  
3. DISPLAY  
8. STANDBY/ON (  
)
Operation indicators are displayed here.  
When STANDBY/ON is pressed on, the indicator goes out  
and the player is turned on.  
4. PLAY/PAUSE (  
Begin or pause disc play.  
)
5. SKIP ( ) / SEARCH  
Use to forward skip a scene or music.  
Front Panel Display  
1
2
4
5
6
3
RW  
DVD  
CD  
HDMI  
1080iP720P  
8
7
1. STOP, PAUSE and OPEN/CLOSE  
7. HDMI indicator :  
HDMI 480P “HDMI”,  
indicator  
HDMI 720P “HDMI + 720P”,  
HDMI 1080i “HDMI + 1080i”,  
HDMI 1080P “HDMI + 1080P”  
8. Displays the Total playing time and  
various messages concerning  
operations such as PLAY, STOP,  
LOAD ...  
2. PLAYBACK, SKIP/SEARCH indicator  
3. Disc Indicator : DVD Video, Audio CD,  
CD-R/RW, DVD-R/RW/RAM,  
DVD+R/RW  
4. DVD VIEW indicator  
5. CD indicator  
NOdSC: No disc loaded.  
6. Disc Media indicator : DVD-R, DVD-  
RW, DVD+R, DVD+RW  
OPEn: The disc tray is open.  
LOAd: Player is loading disc information.  
ENG-9  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SETUP  
Rear Panel  
2
1
2
3
5
4
1. AUDIO OUT JACKS  
-
4. COMPONENT VIDEO OUT JACKS  
Use audio cables to connect to the Audio input jacks of  
your television or audio/video receiver  
-
-
-
Use these jacks if you have a TV with Component  
R
B
Video in jacks. These jacks provide P , P and Y video.  
If P-SCAN is set to “ON” in Video Output of the Setup  
Menu, progressive scan mode will work.  
2. DIGITAL AUDIO OUT JACKS  
Use either an optical or coaxial digital cable to connect  
to a compatible Dolby Digital receiver.  
-
If I-SCAN is set to “ON” in Video Output of the Setup  
Menu, interlaced scan mode will work.  
-
Use either an optical or coaxial digital cable to connect  
to an A/V Amplifier that contains a Dolby Digital,  
MPEG2 or DTS decoder.  
5. HDMI OUT JACK  
-
Use an HDMI cable to connect this jack to the HDMI  
jack on your television for the best quality picture.  
If an HDMI cable is connected to an HDMI-compatible  
TV, HDMI will be output automatically from the player  
about 10 seconds later.  
3. VIDEO OUT JACK  
-
-
Use a video cable to connect to the Video input jack on  
your television.  
Note  
- Consult your TV User’s Manual to find out if your TV supports Progressive Scan (P-SCAN).  
If Progressive Scan is supported, follow the TV User’s Manual regarding Progressive Scan settings in the  
TV’s menu system.  
- The HDMI output of this unit can be connected to a DVI jack on a TV or other device using a conversion  
adapter. In this case, it is necessary to use a TV or display with an HDCP-compatible DVI input.  
- Refer to the TV's instruction manual for detailed information regarding the TV’s HDMI input jack.  
- See pages 51~ 53 to get more information on how to use the setup menu.  
ENG-10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SETUP  
Tour of the Remote Control  
7. INSTANT REPLAY Button  
This function is used to replay the previous 10 seconds of  
a movie from the current position  
17  
18  
1
2
8. SKIP Buttons (  
)
/
Use to skip the title, chapter or track.  
9. STOP Button (  
)
3
19  
20  
10. TV VOL (+, -) Buttons  
Control volume.  
11. MENU Button  
Brings up the DVD player’s menu.  
4
12. ENTER/› ‚ ¥ Š Buttons  
/ , /  
This button functions as a toggle switch.  
21  
22  
13. EZ VIEW Button  
5
6
The aspect ratio of a picture can easily be adjusted  
according to the screen size of your TV (16:9 or 4:3).  
14. DISC MENU Button  
Brings up the Disc menu.  
23  
24  
7
8
9
15. SUBTITLE Button  
16. AUDIO Button  
Use this button to access various audio functions on a disc.  
17. REPEAT A-B Button  
Allows you to repeat play a chosen section (A-B) on a disc.  
18. REPEAT Button  
25  
10  
11  
12  
26  
27  
Allows you to repeat play a title, chapter, track, or disc.  
19. TV POWER Button  
Turns the TV’s power on or off.  
20. OPEN/CLOSE ( ) Button  
To open and close the disc tray.  
21. INSTANT SKIP Button  
This function skips playback ahead 10 seconds.  
22. STEP Button  
13  
14  
28  
29  
Advances play one frame at a time.  
23. PAUSE Button ( )  
Pause disc play.  
30  
31  
15  
16  
24. PLAY Button ( )  
Begins disc play.  
25. TV CH (  
,
) Buttons  
Channel selection.  
26. TV/VIDEO Button  
Press to display all of the available video sources  
( i.e., TV, Cable, Video)  
1. VIDEO SEL. Button  
Changes video output mode  
2. HDMI SEL. Button  
HDMI Output resolution setup.  
27. RETURN Button  
Returns to a previous menu.  
28. EXIT Button  
Exit the on-screen menu.  
3. DVD POWER Button  
Turns the power on or off.  
29. CANCEL Button  
Use to remove menus or status displays from the screen.  
30. ZOOM Button  
4. NUMBER Buttons  
5. BOOKMARK Button  
Enlarges the DVD Picture  
6. SEARCH Buttons (  
)
/
Allow you to search forward/backward through a disc.  
31. INFO Button  
Displays the current disc mode.  
ENG-11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 2  
CONNECTIONS  
Choosing a Connection  
The following shows examples of connections commonly used to connect the DVD player with a TV  
and other components.  
Before Connecting the DVD Player  
- Always turn off the DVD player, TV, and other components before you connect or disconnect any  
cables.  
- Refer to the user’s manual of the additional components (such as a TV) you are connecting for  
more information on those particular components.  
Connecting to a TV with HDMI Jack  
HDMI provides the best picture quality of all the connections.  
1
Using an HDMI-HDMI cable (not included) connect the HDMI  
OUT jack on the rear of the DVD player to the HDMI IN jack of  
your TV.  
2
Press the input selector button on your TV remote control until  
the HDMI signal from the DVD player appears on your TV  
HDMI cable  
(Not Included)  
screen.  
Connecting to a TV with DVI Jack  
1
Using an HDMI-DVI cable (not included), connect the HDMI  
OUT jack on the rear of the DVD player to the DVI IN jack of  
your TV.  
WHITE  
2
RED  
Using the audio cables, connect the AUDIO (red and white)  
OUT jacks on the rear of the DVD player to the AUDIO  
(red and white) IN jacks of your TV.  
Turn on your DVD player and TV.  
Audio Cable  
(Included)  
WHITE  
RED  
HDMI-DVI cable  
(Not Included)  
3
Press the input selector button on your TV remote control until  
the DVI signal from the DVD player appears on your TV screen.  
ENG-12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONNECTIONS  
HDMI VIDEO Specifications  
When you press the HDMI SEL. button, the 480p, 720p, 1080i and 1080p resolutions are selected in order.  
The first press of the HDMI SEL. button, brings up the current resolution.  
The second press allows you to change the HDMI output resolution.  
- Depending on your TV, certain HDMI output resolutions may not work.  
- Please refer to the user's manual of your TV.  
- If an HDMI or HDMI-DVI cable is plugged into TV, the DVD player’s output is set to HDMI automatically about  
10 seconds later.  
- For better picture quality, set the HDMI output resolution to 720p, 1080i or 1080p (see page 52)  
- This player upconverts regular DVDs for playback on 1080p TVs. It does not play HD DVDs or Blu-Ray discs.  
- If you connect an HDMI cable between Samsung TV and this DVD player, you can operate this DVD player  
using your TV remote control. This is only available with Samsung TVs that support Anynet+(HDMI-  
CEC).(see page 56-57)  
- If your TV has an  
logo, then it supports the Anynet+ function.  
HDMI (High Definition Multimedia Interface)  
HDMI enables you to make a digital video and audio connection with a single cable.  
Using HDMI, the DVD player transmits a digital video and audio signal which displays a vivid picture on a  
TV having an HDMI input jack.  
HDMI connection description  
HDMI connector - Video and audio are transferred digitally without compression (LPCM or Bit Stream  
data).  
- The player outputs a pure digital signal to the TV through an HDMI cable.  
- If your TV does not support HDCP (High-bandwidth Digital content protection), snow noise appears on  
the screen.  
Why does Samsung use HDMI?  
Analog TVs require an analog video/audio signal. However, when playing a DVD, the signal transmitted to  
a TV is digital. Therefore either a digital-to-analog converter (in the DVD player) or an analog-to-digital  
converter (in the TV) is required. During this conversion, the picture quality is degraded due to noise and  
signal loss. HDMI technology is superior because it requires no D/A conversion and is a pure digital signal  
from the player to your TV.  
What is HDCP?  
HDCP (High-bandwidth Digital Content Protection) is a system for protecting DVD content output via  
HDMI/DVI from being copied. It provides a secure digital link between a video source (PC, DVD. etc) and  
a display device (TV, projector, etc). Content is encrypted at the source device to prevent unauthorized  
copies from being made.  
ENG-13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONNECTIONS  
Connecting to a TV (Progressive)  
- Connecting to your TV using Component video cables. The 480p resolution is possible with this  
connection.  
- What is "Progressive Scan"?  
Progressive scan has twice as many scanning lines as the interlace output method and provides  
better and clearer picture quality.  
1
Using Component video cables (not included), connect the  
COMPONENT VIDEO OUT jacks on the rear of the DVD player  
to the COMPONENT IN jacks of your TV.  
2
Using the audio cables, connect the AUDIO (red and white)  
WHITE  
OUT jacks on the rear of the DVD player to the AUDIO (red  
GREEN  
and white) IN jacks of your TV.  
BLUE  
Turn on the DVD player and TV.  
RED  
RED  
3
Component cable  
(not included)  
Audio Cable  
(Included)  
Set the Video Output to P-SCAN in the Display Setup menu.  
(See pages 51 to 53)  
WHITE  
RED  
GREEN  
RED BLUE  
You can also use the VIDEO SEL. button to change the Video  
Output mode. (See page 16)  
4
Press the input selector button on your TV remote control until  
the Component signal from the DVD player appears on the TV  
screen.  
To see the progressive video output,  
- Consult your TV User’s Manual to find out if your TV supports Progressive Scan. If Progressive  
Scan is supported, follow the TV User’s Manual regarding Progressive Scan settings in the TV’s  
menu system.  
- Depending on your TV, the connection method may differ from the illustration above.  
ENG-14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONNECTIONS  
Connecting to a TV (Interlace)  
- Connecting to your TV using Component video cables. The 480i resolution is possible with this  
connection.  
- This is the best available connection if your TV is not capable of receiving a Progressive Scan  
signal.  
- You will enjoy excellent quality and accurate color reproduction images. Component video  
B
R
separates the picture element into black and white(Y), blue(P ), red(P ) signals to present clear  
and clean images. (Audio signals are delivered through the audio output.)  
1
Using Component video cables (not included), connect the  
COMPONENT VIDEO OUT jacks on the rear of the DVD player  
to the COMPONENT IN jacks of your TV.  
2
Using the audio cables, connect the AUDIO (red and white)  
WHITE  
OUT jackls on the rear of the DVD player to the AUDIO (red  
and white) IN jacks of your TV.  
GREEN  
BLUE  
Turn on your DVD player and TV.  
RED  
RED  
3
Component cable  
(not included)  
Audio Cable  
(Included)  
Set the Video Output to I-SCAN in the Display Setup menu.  
(See pages 51 to 53)  
WHITE  
RED  
GREEN  
RED BLUE  
You can also use the VIDEO SEL. button to change the Video  
Output mode. (See page 16)  
4
Press the input selector on your TV remote control until the  
Component signal from the DVD player appears on the TV  
screen.  
Note  
- If you want to connect to an Amplifier, please refer to the Amplifier connection page. (See pages 17 to 18)  
R
B
- The Component jacks of your TV may be marked “R-Y, B-Y, Y” or “Cr, Cb, Y” instead of “P , P , Y”  
depending on the manufacturer. The number and position of the jacks may vary depending on the TV set.  
Please refer to the user's manual of your TV.  
ENG-15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONNECTIONS  
Connecting to a TV (Video)  
1
Using Video/Audio cables, connect the VIDEO (yellow)/AUDIO  
(red and white) OUT jacks on the rear of the DVD player to the  
VIDEO (yellow)/AUDIO (red and white) IN jacks of your TV.  
2
WHITE  
Turn on your DVD player and TV.  
RED  
YELLOW  
Video Cable  
(Included)  
3
Audio Cable  
(Included)  
WHITE  
RED  
YELLOW  
Set the Video Output to I-SCAN in the Display Setup menu.  
(See pages 51 to 53).  
You can also use the VIDEO SEL. button to change the Video  
Output mode. (See page 16)  
4
Press the input selector button on your TV remote control until  
the Video signal from the DVD player appears on the TV  
screen.  
Note  
- Noise may be generated if the audio cable placed too close to the power cable.  
- If you want to connect to an Amplifier, please refer to the Amplifier connection page. (See pages 17 to 18)  
- The number and position of the jacks may vary depending on your TV set. Please refer to the user's manual  
of your TV.  
- If there is one audio input terminal on the TV, connect it to the [AUDIO OUT][left] (white) jack of the DVD  
player.  
- If you press the VIDEO SEL. button when the DVD Player is in stop mode or no disc is inserted, the Video  
Output mode changes in the following sequence: (I-SCAN P-SCAN).  
ENG-16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONNECTIONS  
Connecting to an Audio System (2 Channel Amplifier)  
1
Using the audio cables, connect the AUDIO (red and white)  
OUT jacks on the rear of the DVD player to the AUDIO (red  
and white) IN jacks of the Amplifier.  
2
Using the video signal cable(s), connect the HDMI,  
WHITE  
COMPONENT or VIDEO OUT jacks on the rear of the DVD  
player to the VIDEO, COMPONENT or HDMI-DVI IN jack of  
RED  
your TV as described on pages 14 to 16.  
3
Audio Cable  
(Included)  
Turn on your DVD player, TV, and Amplifier.  
WHITE  
RED  
2-Channel stereo amp  
4
Press the input select button of the Amplifier to select the audio  
input your DVD player is connected to in order to hear sound.  
Refer to your Amplifier's user manual to set the Amplifier's  
audio input.  
Note  
- Please turn the volume down when you turn on the Amplifier. Sudden loud sound may cause  
damage to the speakers and your ears.  
- Please set the audio in the menu screen according to the Amplifier.(See pages 49 to 50)  
- The position of jacks may vary depending on the Amplifier.  
Please refer to the user's manual of the Amplifier.  
ENG-17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONNECTIONS  
Connecting to an Audio System (Dolby digital, MPEG2 or DTS Amplifier)  
1
If using an Optical cable (not included), connect the DIGITAL  
AUDIO OUT (OPTICAL) jack on the rear of the DVD player to  
the DIGITAL AUDIO IN (OPTICAL) jack of the Amplifier.  
If using a Coaxial cable (not included), connect the DIGITAL  
AUDIO OUT (COAXIAL) jack on the rear of the DVD player to  
the DIGITAL AUDIO IN (COAXIAL) jack of the Amplifier.  
2
Using the video signal cable(s), connect the HDMI,  
COMPONENT or VIDEO OUT jacks on the rear of the DVD  
player to the VIDEO, COMPONENT or HDMI-DVI IN jacks of  
your TV as described on pages 14 to 16.  
Coaxial Cable  
(not included)  
or  
Optical Cable  
(not included)  
3
Turn on your DVD player, TV, and Amplifier.  
Dolby digital or  
DTS amp  
4
Press the input select button of the Amplifier to select the audio  
input your DVD player is connected to in order to hear sound.  
Refer to your Amplifier's user manual to set the Amplifier's  
audio input.  
Note  
- Please turn the volume down when you turn on the Amplifier. Sudden loud sound may cause  
damage to the speakers and your ears.  
- Please set the audio in the menu screen according to the Amplifier you have connected. (See pages 49 to 50)  
- The position of jacks may vary depending on the Amplifier.  
Please refer to the user's manual of the Amplifier.  
- Please remove the dust cover before using the optical cable (not included) and put the cover on the cable  
again when it's not used.  
ENG-18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 3  
BASIC FUNCTIONS  
Playing a Disc  
Before Play  
- Turn on your TV and set it to the Video Input your DVD player is connected to with your TV’s  
remote control.  
- If you connected the DVD player to an external Audio System, turn on your Audio System and set  
it to the correct Audio Input.  
After plugging in the player, the first time you press the DVD POWER button, the screen  
to the right appears: If you want to select a language, press a NUMBER button.  
Press  
Touche  
1
2
3
4
5
6
for English  
(This screen will only appear when you plug in the player for the first time.)  
If the language for the startup screen is not set, the settings may change whenever you  
turn the power on or off. Therefore, make sure that you select the language you want to  
use.  
pour Français  
für Deutsch  
Drücken Sie  
Pulsar  
para Español  
per Italiano  
Premere  
Druk op  
voor Nederlands  
Once you select a menu language, you can change it by pressing the button on the  
front panel of the unit for more than 5 seconds with no disc in the unit. Then the  
SELECT MENU LANGUAGE window appears again where you can reset your  
preferred language.  
Playback  
1
Press the OPEN/CLOSE  
(
) button.  
The STANDBY indicator  
light goes out and the tray  
opens.  
2
Place a disc gently into the  
tray with the disc’s label  
facing up.  
RESUME function  
3
When you stop disc play, the player remembers  
where you stopped, so when you press the  
PLAY ( ) button again, it will pick up where you  
left off.  
Press the PLAY ( ) button  
or OPEN/CLOSE ( ) button  
to close the disc tray.  
ENG-19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BASIC FUNCTIONS  
Note  
4
- If the player is left in the stop mode for more than  
one minute without pressing any buttons, a  
screen saver will be activated. Press the PLAY  
( ) button to resume normal play.  
Stopping Play  
Press the STOP ( ) button  
during play.  
- If the player is left in the stop mode for more than  
30 minutes, the power will automatically turn off.  
5
Removing the Disc  
Press the OPEN/CLOSE  
(
) button.  
Screen stops, no sound.  
To resume, press the PLAY ( ) button once  
again.  
6
Pausing Play  
Press the PAUSE ( ) or  
STEP button on the remote  
control during play.  
Note  
If the player is left for about 5 minutes in pause  
mode, it will stop.  
Each time the button is pressed, a new frame  
will appear.  
No sound is heard during STEP mode.  
Press the PLAY ( ) button to resume normal  
play.  
7
Step Motion Play (Except  
CD)  
Press the STEP button on  
the remote control during  
play.  
You can only perform step motion play in the  
forward direction.  
No sound is heard during slow mode.  
Press the PLAY ( ) button to resume normal  
play.  
8
Slow Motion Play  
Press the SEARCH (  
)
/
button to choose the play  
speed between 1/8, 1/4 and  
1/2 of normal speed during  
PAUSE or STEP mode.  
Note  
- The ( ) icon indicates an invalid button press.  
- This player does not play HD DVDs or Blu-Ray  
discs.  
ENG-20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BASIC FUNCTIONS  
Using the Search and Skip Functions  
During play, you can search quickly through a chapter or track, and use the skip function to jump to  
the next selection.  
Searching through a Chapter or Track  
If you want to search at a faster speed on the  
DVD or CD, press and hold the button.  
During play, press the  
SEARCH ( or  
) button  
DVD 2X, 4X, 64X, 128X  
on the remote control for  
more than 1 second.  
CD  
2X, 4X, 8X  
Note  
- The speed marked in this function may be  
different from the actual playback speed.  
- No sound is heard during search mode  
(Except CD).  
Skipping Tracks  
During play, press the SKIP  
(
or  
) button.  
- When playing a DVD, if you press the SKIP (  
)
button, it moves to the next chapter. If you press  
the SKIP ( ) button, it moves to the beginning  
of the chapter. Pressing the Skip button twice  
makes the DVD move to the beginning of the  
previous chapter.  
- When playing a CD, if you press the SKIP (  
button, it moves to the next track. If you press  
)
the SKIP ( ) button, it moves to the beginning  
of the track. Pressing the Skip button twice  
makes the CD move to the beginning of the  
previous track.  
ENG-21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BASIC FUNCTIONS  
Using the Display Function  
When Playing a DVD/MPEG4  
You can select Info in the function menu by  
pressing the MENU button.  
1
During play, press the  
INFO button on the remote  
control.  
DVD  
2
Press the /buttons to  
DVD  
001  
select the desired item.  
Title  
002  
Chapter  
00:00:13  
Time  
ENG 5.1CH  
Audio  
Off  
Subtitle  
Enter  
MPEG4  
001  
00:00:13  
MP3 1/8  
Off  
Enter  
You may use the number buttons of the remote  
control to directly access a title, chapter or to  
start the playback from a desired time.  
3
Press the ¥/Š buttons to  
make the desired setup and  
then press the ENTER  
button.  
4
To make the screen  
disappear, press the INFO  
button again.  
ENG-22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BASIC FUNCTIONS  
Note  
To access the desired title when there is more than one in the disc.  
Title  
For example, if there is more than one movie on a DVD, each movie will be identified.  
Chapter  
Most DVD discs are recorded in chapters so that you can quickly find a specific passage (similar to  
tracks on an audio CD).  
Allows playback of the film from a desired time. You must enter the starting time as a reference.  
The time search function does not operate on some discs.  
Time  
Refers to the film's soundtrack language. In the example, the soundtrack is played in English 5.1CH.  
A DVD disc can have up to eight different soundtracks.  
Audio  
Refers to the subtitle languages available in the disc.  
Subtitle  
You will be able to choose the subtitle languages or, if you prefer, turn them off from the screen.  
A DVD disc can have up to 32 different subtitles.  
Using the Disc and Title Menu  
Using the Disc Menu  
1
During the playback of a  
DVD disc, press the MENU  
button on the remote  
control.  
Note  
- Depending on a disc, the Disc Menu may not  
work.  
- You can also select the Disc Menu, using the  
DISC MENU button on the remote control.  
2
Press the /buttons to  
select Disc Menu, then  
press the Š or ENTER  
button.  
Press ENTER key  
for Disc Menu  
Enter  
Return  
Menu  
ENG-23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BASIC FUNCTIONS  
Using the Title Menu  
1
During the playback of a  
DVD disc, press the MENU  
button on the remote  
control.  
2
Press the /buttons to  
select Title Menu, then  
press the Š or ENTER  
button.  
Press ENTER key  
for Title Menu  
Note  
- Depending on a disc, the Title Menu may not  
work.  
Enter  
Return  
Menu  
- Title Menu will only be displayed if there are at  
least two titles in the disc.  
Using the Function Menu  
Using the Function Menu (DVD)  
1
Press the MENU button  
during playback.  
2
Info  
Press the /buttons to  
Zoom  
select Function, then press  
Bookmark  
the Š or ENTER button.  
Repeat  
EZ View  
- Info (See pages 22 to 23)  
Angle  
- Zoom (See page 35)  
Return  
- Bookmark  
Enter  
Menu  
(See pages 33 to 34)  
- Repeat (See pages 25)  
- EZ View  
(See pages 27 to 28)  
- Angle (See pages 31)  
You can also directly select these functions  
using their respective buttons on the remote  
control.  
3
Press the /buttons to  
select one of the six  
functions. Then press the  
Š or ENTER button to  
access the function.  
- INFO  
- ZOOM  
- EZ VIEW  
- REPEAT  
- BOOKMARK  
ENG-24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BASIC FUNCTIONS  
Repeat Play  
Repeat the current track, chapter, title, a chosen section (A-B), or all of the disc.  
When playing a DVD  
1
Press the REPEAT button  
on the remote control.  
Repeat screen appears.  
A DVD repeats play by chapter or title.  
DVD  
2
Chapter ( ): repeats the chapter that is  
playing.  
Press the ¥/Š buttons to  
select Chapter, Title or A-B,  
then press the ENTER  
button.  
ENTER REPEAT  
Off  
01  
01 A - B  
T
Title (  
T
): repeats the title that is playing.  
A-B: repeats a segment of the disc that you  
select.  
Using the A-B Repeat function  
1. Press the REPEAT button on the remote control.  
2. Press the ¥/Š button to select A-B button in the on screen display.  
3. Press the ENTER button at the point where you want repeat play to start (A).  
B is automatically highlighted.  
4. Press the ENTER button at the point where you want the repeat play to stop (B).  
- To return to normal play, press the CANCEL button.  
Note  
A-B REPEAT does not allow you to set point (B) until at least 5 seconds of playback time has  
elapsed after point (A) has been set.  
DVD  
3
To return to normal play,  
ENTER REPEAT  
Off  
01  
01 A - B  
T
press the REPEAT button  
again, then press the ¥/Š  
buttons to select Off and  
press the ENTER button.  
Note  
- Depending on the disc, the Repeat function may  
not work.  
ENG-25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BASIC FUNCTIONS  
Slow Play  
This feature allows you slowly to repeat scenes containing sports, dancing, musical instruments  
being played etc., so you can study them more closely.  
When playing a DVD  
1
During play, press the  
PAUSE ( ) button.  
2
Press the SEARCH (  
/
)
button to choose the play  
speed between 1/8, 1/4 and  
1/2 of normal speed during  
PAUSE or STEP mode.  
ENG-26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 4  
ADVANCED FUNCTIONS  
Adjusting the Aspect Ratio (EZ View)  
The Aspect ratio is the relation between the width and height of a picture. The two most common  
are 4:3 (Standard) and 16:9 (Widescreen). Follow the instructions below for the best aspect ratio  
setting for your TV.  
Changing the aspect ratio (DVD)  
Press the EZ VIEW  
button.  
- The screen size  
changes when the  
button is pressed  
repeatedly.  
- The screen zoom mode  
operates differently  
depending on the screen  
To make the aspect ratio bar disappear,  
press the CANCEL button.  
setting in the Display  
EZ VIEW  
WIDE SCREEN  
Setup menu.  
- To ensure correct  
operation of the EZ  
VIEW button, you should  
set the correct aspect  
ratio in the Display  
Setup menu.  
(See pages 51 to 53).  
Here are some exemples of possible screen sizes by adjusting  
the aspect ratio :  
- 4:3 Letter Box  
- 4:3 Pan&Scan  
Note  
- 16:9 Wide  
This function may behave differently depending  
on the type of disc.  
ENG-27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ADVANCED FUNCTIONS  
If you are using a 16:9 TV  
For 16:9 aspect ratio discs  
For 4:3 aspect ratio discs  
- WIDE SCREEN  
- Normal Wide  
Displays the content of the DVD title in 16:9 aspect ratio.  
Displays the content of the DVD title in 16:9 aspect ratio.  
The picture will look horizontally stretched.  
- SCREEN FIT  
The top and bottom portions of the screen are cut off. When  
playing a 2.35:1 aspect ratio disc, the black bars at the top  
and bottom of the screen will disappear. The picture will  
look vertically stretched. (Depending on a type of disc, the  
black bars may not disappear completely.)  
- SCREEN FIT  
The top and bottom portions of the screen are cut off and  
the full screen appears.  
The picture will look vertically stretched.  
- ZOOM FIT  
- ZOOM FIT  
The top, bottom, left and right portions of the screen are cut  
off and the central portion of the screen is enlarged.  
The top, bottom, left and right of the screen are cut off and  
the central portion of the screen is enlarged.  
- Vertical Fit  
When a 4:3 DVD is viewed on a 16:9 TV, black bars will  
appear at the left and right of the screen in order to prevent  
the picture from looking horizontally stretched.  
If you are using a 4:3 TV  
For 16:9 aspect ratio discs  
For 4:3 aspect ratio discs  
- 4:3 Letter Box  
- Normal Screen  
Displays the content of the DVD title in 16:9 aspect ratio.  
The black bars will appear at the top and bottom of the  
screen.  
Displays the content of the DVD title in 4:3 aspect ratio.  
- SCREEN FIT  
The top and bottom portions of the screen are cut off and  
the full screen appears.  
- 4:3 Pan&Scan  
The left and right portions of the screen are cut off and the  
central portion of the 16:9 screen is displayed.  
The picture will look vertically stretched.  
- ZOOM FIT  
- SCREEN FIT  
The top, bottom, left and right portions of the screen are cut  
off and the central portion of the screen is enlarged.  
The top and bottom portions of the screen are cut off and a  
full screen appears.  
The picture will look vertically stretched.  
- ZOOM FIT  
The top, bottom, left and right of the screen are cut off and  
the central portion of the screen is enlarged.  
ENG-28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ADVANCED FUNCTIONS  
Selecting the Audio Language  
You can select a desired audio language available on a disc quickly and easily with the AUDIO  
button.  
Using the AUDIO button (DVD/MPEG4)  
1
Press the AUDIO button.  
The Audio changes when  
the button is pressed  
repeatedly.  
- The audio languages  
are represented by  
abbreviations.  
DVD  
AUDIO  
ENG DOLBY DIGITAL 5.1CH  
Press the AUDIO button  
MPEG4  
MPEG4 is a compressed video format  
designed to deliver DVD quality video at  
lower data rates and smaller file sizes.  
Types of MPEG4 files are DivX or Xdiv. These  
files have an .avi extension.  
on the remote control  
repeatedly to select the  
desired Audio (MP3,  
PCM, WMA, AC3 and  
MPEG) on MPEG4 discs  
then press the ENTER  
button .  
AUDIO  
MP3 1/1  
2
To remove the AUDIO  
icon, press the CANCEL  
or RETURN button.  
Note  
- This function depends on audio languages that  
are encoded on the disc. This function may not  
work with all DVDs.  
- A DVD disc can contain up to 8 audio  
languages.  
- To have the same audio language come up  
whenever you play a DVD; refer to “Using the  
Audio Language” on page 46.  
ENG-29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ADVANCED FUNCTIONS  
Selecting the Subtitle Language  
You can select a desired subtitle quickly and easily with the SUBTITLE button.  
Using the SUBTITLE button (DVD/MPEG4)  
1
Press the SUBTITLE  
button.  
The subtitle changes when  
the button is pressed  
repeatedly.  
The subtitle languages are  
represented by  
DVD  
abbreviations.  
SUBTITLE  
Off  
MPEG4  
An External subtitle  
option will appear,  
depending on the DivX  
Disc.  
Press the Subtitle button  
MPEG4  
on the remote control  
repeatedly to select the  
SUBTITLE  
desired subtitle  
language on an MPEG4  
disc.  
Off  
2
To remove the SUBTITLE  
icon, press the CANCEL  
or RETURN button.  
Note  
- Depending on the DVD, you may have to select  
the desired subtitle in the DVD’s Disc Menu.  
Press the DISC MENU button.  
- This function depends on what subtitles are  
encoded on the disc. This function may not work  
with all DVDs.  
- A DVD disc can contain up to 32 subtitle  
languages.  
- To have the same subtitle language come up  
whenever you play a DVD;  
Refer to “Using the Subtitle Language” on page  
47.  
ENG-30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ADVANCED FUNCTIONS  
Changing the Camera Angle  
When a DVD contains multiple angles of a particular scene, you can use the ANGLE  
function.  
Using the ANGLE function (DVD)  
If the disc contains multiple angles, the ANGLE mark appears on the screen.  
1
During play, press the  
MENU button on the  
remote control.  
2
Info  
Press the /buttons to  
Zoom  
Bookmark  
select Function , then  
Repeat  
press the  
button.  
Š
or ENTER  
EZ View  
Angle  
Return  
Enter  
Menu  
3
Info  
Press the /buttons to  
select Angle , then press  
the Šor ENTER button.  
Zoom  
Bookmark  
Repeat  
EZ View  
Angle  
Return  
Enter  
Menu  
Note  
- If the disc has only one angle, this feature won’t  
work. Currently, very few discs have this feature.  
4
4/6  
Press the ¥/Š buttons  
on the remote control to  
select the desired angle.  
ENG-31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ADVANCED FUNCTIONS  
Using the Instant Replay/Skip Function  
Using the Instant Replay function (DVD)  
If you miss a scene, you can see it again using this function.  
Press the INSTANT  
REPLAY button.  
- The current scene  
moves backward about  
10 seconds, and plays  
back.  
Using the Instant Skip function (DVD)  
Use this function to skip playback about 10 seconds ahead of the current scene.  
Press the INSTANT SKIP  
button.  
- Playback will skip ahead  
10 seconds.  
Note  
Depending on the disc, these functions may not  
work.  
ENG-32  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ADVANCED FUNCTIONS  
Using the Bookmark Function  
This feature lets you bookmark sections of a DVD, so you can quickly find them at a later time.  
Using the Bookmark Function (DVD)  
1
During play, press the  
MENU button on the  
remote control.  
2
Info  
Press the /buttons to  
Zoom  
select Function, then  
Bookmark  
Repeat  
press the  
button.  
Š
or ENTER  
EZ View  
Angle  
Return  
Enter  
Menu  
3
Info  
Press the /buttons to  
Zoom  
select Bookmark, then  
Bookmark  
Repeat  
EZ View  
Angle  
press the  
button.  
Š
or ENTER  
Return  
Enter  
Menu  
4
When you reach the  
scene you want to mark,  
press the ENTER button.  
Up to three scenes may  
be marked at a time.  
Note  
CANCEL  
- Depending on the disc, the Bookmark function  
may not work.  
ENG-33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ADVANCED FUNCTIONS  
Recalling a Marked Scene  
1~3  
The first 1~3 steps are the  
same as those for “Using  
the Bookmark Function”  
on page 33.  
CANCEL  
4
Press the ¥/Š buttons to  
select a marked scene.  
5
Press the PLAY (  
button to skip to the  
marked scene.  
)
Clearing a Bookmark  
1~3  
The first 1~3 steps are the  
same as those for “Using  
the Bookmark Function”  
on page 33.  
4
CANCEL  
Press the ¥/Š buttons to  
select the bookmark  
number you want to delete.  
5
Press the CANCEL button  
to delete a bookmark  
number.  
ENG-34  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ADVANCED FUNCTIONS  
Using the Zoom Function  
Using the Zoom Function (DVD)  
1
During play, press the  
MENU button on the  
remote control.  
2
Info  
Press the /buttons to  
Zoom  
select Function, then  
Bookmark  
Repeat  
press the  
button.  
Š
or ENTER  
EZ View  
Angle  
Return  
Enter  
Menu  
3
Info  
Press the /buttons to  
Zoom  
select Zoom, then press  
Bookmark  
Repeat  
EZ View  
Angle  
the  
Š
or ENTER  
button.  
Return  
Enter  
Menu  
During DVD play, press ENTER to zoom in the  
4
following order. 2X Nꢀ4X Nꢀ2X NꢀNormal.  
Press the /or ¥/Š  
buttons to select the part  
of the screen you want to  
zoom in on.  
Press the ENTER button.  
ENG-35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ADVANCED FUNCTIONS  
Clips Menu for MP3/WMA/JPEG/MPEG4/CD Audio  
CD Audio or discs with MP3/WMA/JPEG/MPEG4 contain individual songs and/or pictures that will  
be organized into folders on this unit as shown below. They are similar to how you use your  
computer to put files into different folders.  
Open the disc tray.  
Off  
Place the disc on the tray.  
Close the tray.  
The tray closes and this  
screen displays.  
-
-
-
-
: MP3 file icon.  
: WMA file icon.  
: JPEG file icon.  
-
-
-
: Name of currently playing file.  
: Current Playback Time.  
T
: Current Playback Mode : There are four  
modes. They can be selected in order by  
pressing the REPEAT button.  
:
AVI file icon.  
- Off: Normal Playback  
-
: CD Audio file icon.  
: Folder icon.  
- Track: Repeats the current track.  
- Folder: Repeats the current folder.  
- Random: Files in the disc will be played  
in random order.  
-
-
: Current Folder icon.  
Note  
• When playing MP3, WMA, or JPEG file, the Picture Quality and the HDMI Resolution (see pages 53-54)  
cannot be set.  
• When playing an MPEG4 file, the VIDEO SEL. will only work in the stop mode,  
Folder Selection  
The folder can be selected in Stop or Play mode.  
- To select the Parent Folder  
Press the RETURN button to go to the parent folder,  
Root  
or press the /buttons to select “..” and  
press ENTER to go to the parent folder.  
WMA  
JPEG  
- To select the Peer Folder  
MP3  
Parent Folder  
Press the /buttons to select the desired folder,  
then press ENTER.  
MUSIC  
Current Folder  
1st  
- To select the Sub-Folder  
Sub-Folders  
Press the /buttons to select the desired folder,  
then press ENTER.  
2nd  
SONG FILE 1  
SONG FILE 2  
Peer Folders  
SONG FILE 3  
MPEG4 FILES  
ENG-36  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ADVANCED FUNCTIONS  
MP3/WMA/CD Audio Playback  
Off  
1
Open the disc tray.  
Place the disc on the tray.  
Close the tray.  
2
Press the /buttons to  
select a song file.  
Press ENTER to begin  
playback of the song file.  
Repeat/Random playback  
1
Press the REPEAT button  
to change the playback  
mode. There are four  
modes; Off, Track, Folder  
and Random.  
- Off: Normal Playback  
- Track: Repeats the current song file.  
- Folder: Repeats the song files which have the same extension  
in the current folder.  
- Random: Song files which have the same extension will be  
played in random order.  
To resume normal play, press the CANCEL button.  
ENG-37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ADVANCED FUNCTIONS  
CD-R MP3/WMA file  
- Use a decompression transfer rate of at least 64Kbps  
when recording WMA files.  
When you record MP3 or WMA files on a CD-R for  
playback in this unit, please refer to the following.  
Sound quality with WMA files basically depends on the rate  
of compression/decompression you choose.  
Getting CD audio sound requires an analog/digital sampling  
rate, that is conversion to WMA format, of at least 64Kbps  
and up to 192Kbps.  
- Your MP3 or WMA files should be ISO 9660 or JOLIET  
format.  
ISO 9660 format and Joliet MP3 or WMA files are  
compatible with Microsoft's DOS and Windows, and with  
Apple's Mac. This format is the most widely used.  
Conversely, files with decompression rates below 64Kbps  
or over 192Kbps will not be played properly.  
Sampling rate that can be supported for WMA files is >30  
Khz.  
- When naming your MP3 or WMA files, do not exceed 8  
characters, and enter “.mp3, .wma” as the file  
extension.  
- Do not try recording copyright protected MP3 files.  
Certain "secured" files are encrypted and code protected to  
prevent illegal copying. These files are of the following  
types: Windows MediaTM (registered trade mark of Microsoft  
Inc) and SDMITM (registered trade mark of The SDMI  
Foundation). You cannot copy such files.  
General name format : Title.mp3. or Title.wma. When  
composing your title, make sure that you use 8 characters  
or less, have no spaces in the name, and avoid the use of  
special characters including: (.,/,\,=,+).  
- Use a decompression transfer rate of at least 128 Kbps  
when recording MP3 files.  
- Important:  
The above recommendations cannot be taken as a  
guarantee that the DVD player will play MP3 recordings, or  
as an assurance of sound quality. You should note that  
certain technologies and methods for MP3 file recording on  
CD-Rs prevent optimal playback of these files on your DVD  
player (degraded sound quality and in some cases, inability  
of the player to read the files).  
Sound quality with MP3 files basically depends on the rate  
of compression/decompression you choose. Getting CD  
audio sound requires an analog/digital sampling rate, that is  
conversion to MP3 format, of at least 128 Kbps and up to  
160 Kbps. However, choosing higher rates, like 192  
Kbps or more, only rarely give better sound quality.  
Conversely, files with decompression rates below 128 Kbps  
will not be played properly.  
- This unit can play a maximum of 500 files and 500 folders  
per disc.  
ENG-38  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ADVANCED FUNCTIONS  
MPEG4 Playback  
MPEG4 Play Function  
MPEG4 is a compressed video format designed to deliver DVD quality video at lower data rates  
and smaller file sizes. Types of MPEG4 files are DivX or Xdiv. These files have an .avi extension.  
AVI files are used to contain the audio and video data. Only AVI format files with the “.avi”  
extensions can be played.  
Off  
1
Open the disc tray.  
Place the disc on the tray.  
Close the tray.  
2
Press the /or ¥/Š  
buttons to select an avi file  
(DivX/XiviD) and then  
press the ENTER button.  
S t o p  
O f f  
00:00:00  
/ M P E G 4  
T
. . .  
a 0 1 _ d i v x 5 1 b - 8  
a 0 2 _ d i v x 5 0 5 b - 8  
a 0 3 _ d i v x 5 0 2 s p - 8  
a 0 4 _ d i v x 4 1 2 - 8  
Menu  
Enter  
Return  
Repeat and Repeat A-B Playback  
Press the REPEAT button to  
change playback mode.  
There are 3 modes  
Off, Folder, Title.  
- Folder : repeats the AVI files which have the same extension  
in the current folder.  
- Title : repeats the title that is playing.  
- Off : No Repeat mode.  
To return to normal play, press the REPEAT A-  
B button until the display shows Repeat:Off.  
Press the REPEAT A-B  
button to set the point where  
you want repeat play to start  
(A).  
Note  
A-B REPEAT does not allow you to set point (B)  
until at least 5 seconds of playback time has  
elapsed after point (A) has been set.  
Press the REPEAT A-B  
button again at the point  
where you want the repeat  
play to stop (B).  
ENG-39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ADVANCED FUNCTIONS  
Possible warning messages that may appear when trying to  
play DivX/AVI files are :  
1. No Authorization  
MPEG4 Function Description  
Function  
Description  
Reference page  
-
During play, press the  
button, it moves forward  
or backward 5 minutes.  
or  
Skip  
or  
- File with bad registration code.  
(
(
)
)
During play, press the SEARCH  
(
or  
) button and press  
Search  
or  
again to search at a faster  
speed. Allows you to search  
at a faster speed in an AVI  
file. (2X, 4X, 8X)  
-
Allows you to search at a  
slower speed in an AVI file.  
(1/8X, 1/4X, 1/2X)  
Slow Motion  
Play  
P 20  
2. Unsupported Codec  
Each time the STEP button  
is pressed, a new frame will  
appear.  
Step Motion  
Play  
- Files with certain Codec Types, Versions (ex.  
MP4, AFS and other proprietary codecs) are not  
supported by this player.  
P 20  
P 35  
Will zoom in  
2X/4X/2X/Normal  
ZOOM  
NO CODEC  
- Depending on the MPEG4 file, these functions may not work.  
CD-R AVI file  
This unit can play the following video compression formats  
within the AVI file format:  
- DivX 3.11 contents  
- DivX 4 contents (Based on MPEG-4 Simple Profile)  
- DivX 5 contents (MPEG-4 simple profile plus additional  
features such as bi-directional frames. Qpel and GMC are  
also supported.)  
3. Unsupported Resolution  
- Files containing resolutions higher than the player’s  
specification are not supported.  
- XviD MPEG-4 compliant contents.  
NO CODEC  
DVD-RW & DVD+R  
Supported DivX file formats :  
- Basic DivX format DivX3.11 / 4.12/ 5.x  
- Xvid (MPEG-4 compliant video codec) and DivX Pro  
- File format : *.avi, *.div, *.divx.  
This unit supports all resolutions up to maximum below.  
DivX3.11 & DivX4 & XviD  
Bitrate may fluctuate:  
DivX5  
720 x 480 @30fps  
Device may skip decoding 720 x 576 @25fps  
the high bitrate portions  
and begin decoding again  
when Bitrate returns to  
normal.  
: Maximum bitrate : 4Mbps  
Note  
- The DVD-1080P8 can support resolutions up to 720 x 480 @30 frames/ 720 x 576 @25 frames for DivX  
discs.  
- This unit supports CD-R/RWs written in MPEG4 in accordance with the “ISO9660 format”.  
ENG-40  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ADVANCED FUNCTIONS  
Picture CD Playback  
Off  
1
Select the desired folder.  
(See page 37)  
Off  
2
Press the /buttons to  
select a Picture file in the  
clips menu and then press  
the ENTER button.  
3
ENTER RETURN  
Note  
Press the INFO button to  
display the menu.  
- Press the STOP button to return to the clips  
menu.  
Press the ¥/Š buttons to  
select the menu you want  
to view, then press the  
ENTER button.  
- When playing a Kodak Picture CD, the unit  
displays the Photo directly, not the clips menu.  
Rotation  
: The pictures change automatically with about a 6  
second interval.  
:Each time the ENTER button is pressed, the  
picture rotates 90 degrees clockwise.  
: The pictures change automatically with  
about a 12 second interval.  
Zoom  
: The pictures change automatically with  
about a 18 second interval.  
: Press the /buttons to select the part of the screen  
you want to zoom in on.  
Press the ENTER button. Each time the ENTER  
button is pressed, the picture is enlarged up  
to 2X.  
ENTER RETURN  
TIMER:  
Slide Show  
: The unit enters slide show mode.  
• Before beginning the Slide Show, the picture interval must be  
set.  
Note  
- Depending on the file size, the amount of time between each picture may be different from the set interval  
time.  
- If you don’t press any button, the slide show will start automatically in about 10 seconds by default.  
ENG-41  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ADVANCED FUNCTIONS  
MP3-JPEG Playback  
You can play a JPEG photo file using music as a background.  
1
Press the /buttons to  
select an MP3 file in the  
clips menu and then  
press the ENTER button.  
Music will play from the beginning.  
2
Press the /buttons to  
select a JPEG file in the  
clips menu and then  
press the ENTER button.  
Note  
3
MP3 and JPEG files have to be on the same  
Press the STOP button  
when you want to stop  
the playback.  
disc.  
CD-R JPEG Discs  
- Only files with the “.jpg” and “.JPG” extensions can be played.  
- If the disc is not closed, it will take longer to start playing and not all of the recorded files may be played.  
- Only CD-R discs with JPEG files in ISO 9660 or Joliet format can be played.  
- The name of the JPEG file may not be longer than 8 characters and should contain no blank spaces or special characters  
(. / = +).  
- Only a consecutively written multi-session disc can be played. If there is a blank segment in the multi-session disc, the disc can  
be played only up to the blank segment.  
- A maximum of 3000 images can be stored on a single CD.  
- Kodak Picture CDs are recommended.  
- When playing a Kodak Picture CD, only the JPEG files in the pictures folder can be played.  
- Kodak Picture CD: The JPEG files in the pictures folder can be played automatically.  
- Konica Picture CD: If you want to see the Picture, select the JPEG files in the clips menu.  
- Fuji Picture CD: If you want to see the Picture, select the JPEG files in the clips menu.  
- QSS Picture CD: The unit may not play QSS Picture CD.  
- If the number of files in 1 Disc is over 500, only the first 500 JPEG files can be played.  
- If the number of folders in 1 Disc is over 500, only the first JPEG files in 500 folders can be played.  
ENG-42  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 5  
NAVIGATING THE SETUP MENU  
Using the Setup Menu  
The Setup menu lets you customize your DVD player by allowing you to select various language  
preferences, set up parental levels, and even adjust the player to the type of television screen you  
have.  
1
Language Setup  
Audio Setup  
Š
Š
Š
Š
Š
With the unit in Stop  
mode, press the MENU  
button on the remote  
control.  
Display Setup  
Parental Setup :  
DivX(R)Registration  
Anynet+ (HDMI-CEC) : On  
Press the /buttons to  
select Setup, then press  
Enter  
Return  
Menu  
Š
the  
or ENTER button.  
Language Setup : Setup of the Language.  
Audio Setup : Setup of the Audio Options.  
Display Setup :Setup of the Display Options. Use to select which type of screen you want to  
watch and several display options.  
Parental Setup : Setup of the Parental Level. Allows users to set the level necessary to prevent  
children from viewing unsuitable movies such as those with violence, adult  
subject matter, etc.  
Divx(R) Registration : Please use the Registration code to register this player with the DivX(R)  
Video On Demand format. To learn more go to www.divx.com/vod.  
Anynet+(HDMI-CEC) : Setup of the Anynet+(HDMI-CEC) Options.  
2
Press the /buttons to  
access the different  
features. Press the  
Š
or  
ENTER button to access  
the sub features.  
3
To make the setup screen  
disappear after setting up,  
press the MENU button  
again.  
Note  
Depending on the disc, some Setup menu  
selections may not work.  
ENG-43  
Download from Www.Somanuals.com. All Manuals Search And Download.  
NAVIGATING THE SETUP MENU  
Setting Up the Language Features  
If you set the player menu, disc menu, audio and subtitle language in advance, they will come up  
automatically every time you watch a movie.  
Using the Player Menu Language  
1
With the unit in Stop  
mode, press the MENU  
button.  
2
Language Setup  
Audio Setup  
Š
Š
Š
Š
Š
Press the /buttons to  
Display Setup  
select Setup, then press  
Parental Setup :  
DivX(R)Registration  
Anynet+ (HDMI-CEC) : On  
the  
Š
or ENTER button.  
Enter  
Return  
Menu  
3
Language Setup  
Audio Setup  
Š
Š
Š
Š
Š
Press the /buttons to  
select Language Setup,  
Display Setup  
then press the  
Š
or  
Parental Setup :  
DivX(R)Registration  
ENTER button.  
Anynet+ (HDMI-CEC) : On  
Enter  
Return  
Menu  
LANGUAGE SETUP  
4
Player Menu  
Disc Menu  
Audio  
:
:
:
:
:
English  
English  
English  
Automatic  
Unicode  
Press the /buttons to  
select Player Menu, then  
Subtitle  
press the  
button.  
Š
or ENTER  
DivX Subtitle  
Enter  
Return  
Menu  
- The language is selected and the screen  
returns to the Language Setup menu.  
LANGUAGE SETUP  
5
P
l
a
y
e
r
e
n
u
English  
Press the /buttons to  
select the desired  
- To make the setup menu disappear, press the  
MENU button.  
Disc Menu  
Audio  
Français  
Deutsch  
Español  
Italiano  
language, then press the  
Subtitle  
DivX Subtitle  
Nederlands  
Š
or ENTER button.  
Return  
Menu  
Enter  
ENG-44  
Download from Www.Somanuals.com. All Manuals Search And Download.  
NAVIGATING THE SETUP MENU  
Using the Disc Menu Language  
This function changes the text language only on the disc menu screens.  
1
With the unit in Stop  
mode, press the MENU  
button.  
2
Language Setup  
Audio Setup  
Š
Š
Š
Š
Š
Press the /buttons to  
Display Setup  
select Setup, then press  
Parental Setup :  
DivX(R)Registration  
Anynet+ (HDMI-CEC) : On  
the  
Š
or ENTER button.  
Enter  
Return  
Menu  
3
Language Setup  
Audio Setup  
Š
Š
Š
Š
Š
Press the /buttons to  
select Language Setup,  
Display Setup  
Parental Setup :  
DivX(R)Registration  
then press the  
Š
or  
ENTER button.  
Anynet+ (HDMI-CEC) : On  
Enter  
Return  
Menu  
LANGUAGE SETUP  
4
Player Menu  
Disc Menu  
Audio  
:
:
:
:
:
English  
English  
English  
Automatic  
Unicode  
Press the /buttons  
to select Disc Menu, then  
Subtitle  
press the  
button.  
Š
or ENTER  
DivX Subtitle  
Enter  
Return  
Menu  
- If the selected language is not recorded on  
the disc, the original pre-recorded language is  
selected.  
LANGUAGE SETUP  
5
Player Menu  
Disc Menu  
Audio  
Press the /buttons to  
select the desired  
English  
Français  
Deutsch  
Español  
Italiano  
- The language is selected and the screen  
returns to the Language Setup menu.  
language, then press the  
Subtitle  
Š
or ENTER button.  
Nederlands  
DivX Subtitle  
- To make the setup menu disappear, press the  
MENU button.  
ENG-45  
Download from Www.Somanuals.com. All Manuals Search And Download.  
NAVIGATING THE SETUP MENU  
Using the Audio Language  
1
With the unit in Stop  
mode, press the MENU  
button.  
2
Language Setup  
Š
Š
Š
Š
Š
Audio Setup  
Press the /buttons to  
Display Setup  
select Setup, then press  
Parental Setup :  
the  
Š
or ENTER button.  
DivX(R)Registration  
Anynet+ (HDMI-CEC) : On  
Enter  
Return  
Menu  
3
Language Setup  
Audio Setup  
Š
Š
Š
Š
Š
Press the /buttons to  
select Language Setup,  
Display Setup  
then press the  
Š
or  
Parental Setup :  
DivX(R)Registration  
ENTER button.  
Anynet+ (HDMI-CEC) : On  
Enter  
Return  
Menu  
LANGUAGE SETUP  
4
Player Menu  
Disc Menu  
Audio  
:
:
:
:
:
English  
English  
English  
Automatic  
Unicode  
Press the /buttons to  
select Audio, then press  
Subtitle  
the  
Š
or ENTER button.  
DivX Subtitle  
Enter  
Return  
Menu  
- Select “Original” if you want the default  
soundtrack language to be the original  
language the disc is recorded in.  
LANGUAGE SETUP  
5
Player Menu  
Disc Menu  
Audio  
Press the /buttons to  
select the desired  
Original  
English  
Français  
Deutsch  
Español  
Italiano  
- If the selected language is not recorded on  
the disc, the original pre-recorded language is  
selected.  
language, then press the  
Subtitle  
Š
or ENTER button.  
DivX Subtitle  
- The language is selected and the screen  
returns to the Language Setup menu.  
- To make the setup menu disappear, press the  
MENU button.  
ENG-46  
Download from Www.Somanuals.com. All Manuals Search And Download.  
NAVIGATING THE SETUP MENU  
Using the Subtitle Language  
1
With the unit in Stop  
mode, press the MENU  
button.  
2
Language Setup  
Audio Setup  
Š
Press the /buttons to  
Š
Š
Š
Š
select Setup, then press  
Display Setup  
Parental Setup :  
DivX(R)Registration  
Anynet+ (HDMI-CEC) : On  
the  
Š
or ENTER button.  
Enter  
Return  
Menu  
3
Language Setup  
Audio Setup  
Š
Š
Š
Š
Š
Press the /buttons to  
select Language Setup,  
Display Setup  
then press the  
Š
or  
Parental Setup :  
DivX(R)Registration  
ENTER button.  
Anynet+ (HDMI-CEC) : On  
Enter  
Return  
Menu  
LANGUAGE SETUP  
4
Player Menu  
Disc Menu  
Audio  
:
:
:
:
:
English  
English  
English  
Automatic  
Unicode  
Press the /buttons to  
select Subtitle, then press  
Subtitle  
the  
Š
or ENTER button.  
DivX Subtitle  
Enter  
Return  
Menu  
- Select “Automatic” if you want the subtitle  
language to be the same as the language  
selected as the audio language.  
LANGUAGE SETUP  
5
Player Menu  
Disc Menu  
Audio  
Press the /buttons to  
select the desired  
Automatic  
English  
- Some discs may not contain the language you  
select ; in that case the disc will use its  
original language setting.  
Français  
Deutsch  
Español  
Italiano  
language, then press the  
Subtitle  
Š
or ENTER button.  
DivX Subtitle  
- The language is selected and the screen  
returns to the setup menu.  
Enter  
Return  
Menu  
- To make the setup menu disappear, press the  
MENU button.  
ENG-47  
Download from Www.Somanuals.com. All Manuals Search And Download.  
NAVIGATING THE SETUP MENU  
Using the DivX Subtitle Language  
1
With the unit in Stop  
mode, press the MENU  
button.  
2
Language Setup  
Audio Setup  
Š
Press the /buttons to  
Š
Š
Š
Š
Display Setup  
select Setup, then press  
Parental Setup :  
DivX(R)Registration  
Anynet+ (HDMI-CEC) : On  
the  
Š
or ENTER button.  
Enter  
Return  
Menu  
3
Language Setup  
Audio Setup  
Š
Š
Š
Š
Š
Press the /buttons to  
select Language Setup,  
Display Setup  
then press the  
Š
or  
Parental Setup :  
DivX(R)Registration  
ENTER button.  
Anynet+ (HDMI-CEC) : On  
Enter  
Return  
Menu  
LANGUAGE SETUP  
4
Player Menu  
Disc Menu  
Audio  
:
:
:
:
:
English  
English  
English  
Automatic  
Unicode  
Press the /buttons to  
select DivX Subtitle, then  
Subtitle  
press the  
button.  
Š
or ENTER  
DivX Subtitle  
Enter  
Return  
Menu  
- The language is selected and the screen  
returns to the setup menu.  
LANGUAGE SETUP  
English  
5
Player Menu  
Disc Menu  
Audio  
:
Press the /buttons to  
select the desired  
- To make the setup menu disappear, press the  
MENU button.  
Unicode  
Western  
Turkish  
Central  
Cyrillic  
Greek  
language, then press the  
Subtitle  
DivX Subtitle  
Š
or ENTER button.  
ENG-48  
Download from Www.Somanuals.com. All Manuals Search And Download.  
NAVIGATING THE SETUP MENU  
Setting Up the Audio Options  
Audio Options allow you to set up the audio device and sound status settings  
depending on the audio system in use.  
1
With the unit in Stop  
mode, press the MENU  
button.  
2
Language Setup  
Audio Setup  
Š
Š
Š
Š
Š
Press the /buttons to  
Display Setup  
select Setup, then press  
Parental Setup :  
DivX(R)Registration  
Anynet+ (HDMI-CEC) : On  
the  
Š
or ENTER button.  
Enter  
Return  
Menu  
3
Language Setup  
Audio Setup  
Š
Š
Š
Š
Š
Press the /buttons to  
select Audio Setup, then  
Display Setup  
Parental Setup :  
DivX(R)Registration  
press the  
button.  
Š
or ENTER  
Anynet+ (HDMI-CEC) : On  
Enter  
Return  
Menu  
To make the setup menu disappear, press the  
MENU button.  
AUDIO SETUP  
4
Digital Out  
:
:
:
:
PCM  
PCM  
On  
Press the /buttons to  
MPEG-2 Digital Out  
Dynamic Compression  
PCM Down Sampling  
select the desired item,  
On  
then press the  
Š
or  
ENTER button.  
Enter  
Return  
Menu  
ENG-49  
Download from Www.Somanuals.com. All Manuals Search And Download.  
NAVIGATING THE SETUP MENU  
The following describes each option found in the Audio Setup Menu.  
Digital Out  
- PCM : Converts to PCM(2CH) audio.  
- Bitstream : Outputs Dolby Digital via digital output.  
Select Bitstream when connecting to a Dolby Digital Decoder.  
MPEG-2 Digital Out  
- PCM : Converts to PCM(2CH) audio.  
- Bitstream : Converts to MPEG-2 Digital Bitstream (5.1 or 7.1 CH). Select Bitstream when using  
the Digital Audio Output.  
Dynamic Compression  
- On : To select dynamic compression. This is useful for watching movies late at night, as it  
balances the loud and quiet portions of a disc.  
- Off : To select the standard range.  
PCM Down Sampling  
- On : Select this when the Amplifier connected to the player is not 96KHz compatible.  
In this case, the 96KHz signals will be down converted to 48KHZ.  
- Off : Select this when the Amplifier connected to the player is 96KHz compatible. In this case,  
all signals will be output without any changes.  
Note  
Even when PCM Down sampling is Off, some discs will only output down-sampled audio through  
the digital outputs.  
HDMI  
- If your TV is not compatible with compressed multi-channel formats (Dolby Digital, DTS,  
MPEG), you should set Digital Audio to PCM.  
- If your TV is not compatible with LPCM sampling rates over 48kHz, you should set PCM  
Down sampling to On.  
Note  
To make the Setup menu disappear, press the MENU button.  
• There is no analog audio output when you play a DTS disc.  
You must make a Digital audio connection (Optical or Coaxial).  
Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are  
trademarks of Dolby Laboratories.  
“DTS” and “DTS Digital Out” are trademarks of Digital Theater Systems, Inc.  
ENG-50  
Download from Www.Somanuals.com. All Manuals Search And Download.  
NAVIGATING THE SETUP MENU  
Setting Up the Display Options  
Display options enable you to set various video functions of the player.  
1
With the unit in Stop  
mode, press the MENU  
button.  
2
Language Setup  
Audio Setup  
Š
Š
Š
Š
Š
Press the /buttons to  
Display Setup  
select Setup, then press  
Parental Setup :  
DivX(R)Registration  
Anynet+ (HDMI-CEC) : On  
the  
Š
or ENTER button.  
Enter  
Return  
Menu  
3
Language Setup  
Audio Setup  
Š
Š
Š
Š
Š
Press the /buttons to  
Display Setup  
select Display Setup,  
Parental Setup :  
DivX(R)Registration  
then press the  
Š
or  
ENTER button.  
Anynet+ (HDMI-CEC) : On  
Enter  
Return  
Menu  
To make the setup menu disappear, press the  
MENU button.  
DISPLAY SETUP  
4
TV Aspect  
Still Mode  
: Wide  
: Auto  
Press the /buttons to  
Screen Messages : On  
select the desired item,  
Video Output  
HDMI  
: I-SCAN  
then press the  
Š
or  
Š
Š
Picture Quality  
ENTER button.  
Enter  
Return  
Menu  
ENG-51  
Download from Www.Somanuals.com. All Manuals Search And Download.  
NAVIGATING THE SETUP MENU  
the screen returns to the previous menu.  
HDMI  
This setting is used when the unit is  
connected by HDMI to Display devices (TV,  
Projector, etc.).  
The following describes each option found in the  
Display Setup Menu.  
TV Aspect  
Depending on a type of television you have,  
you may want to adjust the screen setting  
(aspect ratio).  
- Resolution Setting  
- 4:3 Letter Box : Select when you want to  
see the total 16:9 ratio screen DVD  
supplies, even though you have a TV with a  
4:3 ratio screen. Black bars will appear at  
the top and bottom of the screen.  
The resolution setting is dependent on the  
capability of your TV or Monitor.  
- Auto : Auto resolution setting  
- Manual : Manual resolution setting  
- Resolution  
- 4:3 Pan&Scan : Select this for conventional  
size TVs when you want to see the central  
portion of the 16:9 screen. (Extreme left and  
right side of movie picture will be cut off.)  
480p : 720 x 480  
720p : 1280 x 720  
1080i : 1920 x 1080  
1080p : 1920 x 1080  
- 16:9 Wide : You can view the full 16:9  
picture on your widescreen TV.  
For the best video performance, check your  
TV’s user manual for proper resolution  
setting.  
DISPLAY SETUP  
TV Aspect  
4:3 Letter Box  
4:3 Pan&Scan  
16:9 Wide  
Still Mode  
Screen Messa  
Video Output  
HDMI  
HDMI SETUP  
Resolution Setting : Manual  
Š
Š
Resolution  
: 720p  
Picture Quality  
Still Mode  
Enter  
Return  
Menu  
These options will help prevent picture shake  
in still mode and display small text clearer.  
If your TV does not support the resolution  
that has been chosen, the following  
warning message may appear and the  
resolution will be returned to the previous  
setting.  
- Auto : When selecting Auto, Field/Frame  
mode will be automatically adjusted.  
- Field : Select this feature to minimize  
screen shaking.  
- Frame : Select this feature when you want  
to read text more clearly on the screen .  
Screen Messages  
HDMI SETUP  
This resolution is not  
supported by the TV.  
Use to turn on-screen messages On or Off.  
Video Output  
Select Video Output.  
Enter  
Return  
Menu  
- I-SCAN : Select when you want to use  
Video and Component 480i(Interlace) Out.  
- P-SCAN : Select when you want to use  
Component 480p(Progressive) Out or  
HDMI.  
• If you press the VIDEO SEL. button with  
no disc inserted, the Video output mode is  
changed in the following order:  
(I-SCAN P-SCAN)  
• If the Yes/No selection in the Display Setup  
sub Menu is not made within 10 seconds,  
ENG-52  
Download from Www.Somanuals.com. All Manuals Search And Download.  
NAVIGATING THE SETUP MENU  
Picture Quality  
- Black Level : Adjusts the brightness of the  
screen (On or Off). It does not function in  
Progressive mode.  
- Brightness : Level 1 ~ Level 5  
- Contrast : Level 1 ~ Level 5  
- Color Saturation : Level 1 ~ Level 5  
PICTURE QUALITY  
Black Level  
Brightness  
Contrast  
: On  
: Level 3  
: Level 3  
: Level 3  
Color Saturation  
Enter  
Return  
Menu  
• Consult your TV User’s Manual to find  
out if your TV supports Progressive Scan.  
If Progressive Scan is supported, follow  
the TV User’s Manual regarding  
Progressive Scan settings in the TV’s  
menu system.  
• If Video Output is set incorrectly, the TV  
screen may be blank.  
• The resolutions available for HDMI output  
depend on the connected TV or projector.  
For details, see the user’s manual of your  
TV or projector.  
• When the resolution is changed during  
playback, it may take a few seconds for a  
normal image to appear.  
• If you have HDMI connected, better  
picture quality will be provided when the  
output resolution is set to 720p, 1080i or  
1080p.  
ENG-53  
Download from Www.Somanuals.com. All Manuals Search And Download.  
NAVIGATING THE SETUP MENU  
Setting Up the Parental Control  
The Parental Control function works in conjunction with DVDs that have been assigned a rating,  
which helps you control the types of DVDs that your family watches. There are up to 8 rating levels  
on a disc.  
Setting Up the Rating Level  
1
With the unit in Stop  
mode, press the MENU  
button.  
2
Language Setup  
Audio Setup  
Š
Š
Š
Š
Š
Press the /buttons to  
Display Setup  
select Setup, then press  
Parental Setup :  
DivX(R)Registration  
Anynet+ (HDMI-CEC) : On  
the  
Š
or ENTER button.  
Enter  
Return  
Menu  
3
Language Setup  
Audio Setup  
Š
Š
Š
Š
Š
Press the /buttons to  
Display Setup  
select Parental Setup,  
Parental Setup :  
DivX(R)Registration  
then press the  
Š
or  
ENTER button.  
Anynet+ (HDMI-CEC) : On  
Enter  
Return  
Menu  
PARENTAL SETUP  
: Kids Safe  
4
Rating Level  
Press the /buttons to  
Change Password  
select Rating Level, then  
press the  
button.  
Š
or ENTER  
Enter  
Return  
Menu  
PARENTAL SETUP  
: Kids Safe  
5
Rating Level  
Enter your password.  
By default, password is  
set to 0000. Please  
Change Password  
Enter Password  
change password to other  
than 0000 to activate  
parental control function.  
Enter  
Return  
Menu  
To make the setup menu disappear, press the  
MENU button.  
PARENTAL SETUP  
6
Rating Level  
Kids Safe  
Press the /buttons to  
select the Rating Level  
you want, then press the  
For example, if you select the Kids Safe level,  
discs that contain level 2 or higher will not play.  
Change Passwor  
Level 2  
Level 3  
Level 4  
Level 5  
Level 6  
Š
or ENTER button.  
e.g) Setting up in Kids  
Enter  
Return  
Menu  
Safe.  
ENG-54  
Download from Www.Somanuals.com. All Manuals Search And Download.  
NAVIGATING THE SETUP MENU  
Changing the Password  
1
With the unit in Stop  
mode, press the MENU  
button.  
2
Language Setup  
Š
Š
Š
Š
Š
Audio Setup  
Press the /buttons to  
Display Setup  
select Setup, then press  
Parental Setup :  
the  
Š
or ENTER button.  
DivX(R)Registration  
Anynet+ (HDMI-CEC) : On  
Enter  
Return  
Menu  
3
Language Setup  
Audio Setup  
Š
Š
Š
Š
Š
Press the /buttons to  
Display Setup  
select Parental Setup,  
Parental Setup :  
DivX(R)Registration  
then press the  
Š
or  
ENTER button.  
Anynet+ (HDMI-CEC) : On  
Enter  
Return  
Menu  
To make the setup menu disappear, press the  
MENU button.  
PARENTAL SETUP  
: Kids Safe  
4
Rating Level  
Press the /button to  
select Change  
Change Password  
Password, then press the  
Š
or ENTER button.  
Enter your new password.  
Re-enter the new  
Enter  
Return  
Menu  
password again.  
PARENTAL SETUP  
: Kids Safe  
Rating Level  
Change Password  
Enter Password  
Enter  
Return  
Menu  
PARENTAL SETUP  
: Kids Safe  
Rating Level  
Change Password  
Enter New Password  
Note  
Enter  
Return  
Menu  
If you have forgotten your password, see  
“Forgot Password” in the Troubleshooting Guide.  
ENG-55  
Download from Www.Somanuals.com. All Manuals Search And Download.  
NAVIGATING THE SETUP MENU  
Setting Up Anynet+(HDMI-CEC)  
Anynet+ is a function that can be used to operate this DVD Player using a Samsung TV  
remote control. This is done by connecting the DVD player to a SAMSUNG TV using an HDMI  
Cable. (see pages 12-13) This is only available with SAMSUNG TVs that support Anynet+.  
To operate Anynet+, you must turn Anynet+(HDMI-CEC) On in the Setup Menu.  
1
With the unit in Stop  
mode, press the MENU  
button.  
2
Language Setup  
Audio Setup  
Š
Š
Š
Š
Š
Press the /buttons to  
Display Setup  
select Setup, then press  
Parental Setup :  
DivX(R)Registration  
Anynet+ (HDMI-CEC) : On  
the  
Š
or ENTER button.  
Enter  
Return  
Menu  
3
Language Setup  
Audio Setup  
Š
Š
Š
Š
Š
Press the /buttons to  
Display Setup  
select Anynet+(HDMI-  
Parental Setup :  
DivX(R)Registration  
CEC), then press the  
Š
or ENTER button.  
Anynet+ (HDMI-CEC) : On  
Enter  
Return  
Menu  
To make the setup menu disappear, press the  
MENU button.  
4
Language Setup  
Audio Setup  
Š
Set the Anynet+(HDMI-  
Š
Š
Š
Š
Display Setup  
CEC) to “On”on your DVD  
Parental Setup :  
DivX(R)Registration :  
Player., then press the  
Š
or ENTER button.  
Off  
Anynet+ (HDMI-
On  
Enter  
Return  
Menu  
5
DVDP  
View TV  
®
®
®
®
Set the Anynet+ function on  
your Samsung TV. (See your  
TV instruction manual for  
more information.).  
Select Device  
Record  
Menu on Device  
Device Operation  
®
®
®
Receiver  
Setup  
:
Off  
ENTER  
Move  
Exit  
• When you press Anynet+  
button on the TV remote  
control, the OSD to the right  
will appear.  
TV Menu  
ENG-56  
Download from Www.Somanuals.com. All Manuals Search And Download.  
NAVIGATING THE SETUP MENU  
You can operate the DVD Player by using the TV remote control. These TV remote buttons  
can be used to operate the DVD Player:  
,
,
,
,
,
,
and  
buttons,  
buttons.  
- Select Device : Use this option to select device which you want to connect to your TV.  
- Menu on Device : Same as MENU button on the DVD Player remote control.  
- Device Operation : Same as INFO button on the DVD Player remote control.  
Note  
• While watching TV, your TV screen will change to the play screen when you press the  
PLAY button of the DVD player.  
• If you play a DVD when the TV power is off, the TV will power On.  
• If you turn the TV off, the DVD Player will power off automatically.  
• If you change from HDMI to other sources (Composite,Component,... etc) while playing a  
DVD disc, the DVD Player will stop playing.  
ENG-57  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 6  
REFERENCE  
2. Press the ¥/Š buttons to select Total, then  
press the ENTER button.  
Firmware upgrade  
Introduction  
Upgrading the Firmware will keep your DVD player  
up to date.  
New Version : 071129V7.B.1080P8XEG  
The latest firmware version for this unit is provided  
on the Samsung Website.(www.samsung.com).  
Firmware upgrade starts  
How to make an upgrade disc  
You must burn the latest firmware version onto a  
blank CD-R or CD-RW disc:  
- During the firmware upgrade process, the  
tray will open.  
Please remove the disc and wait for about  
2 minutes.  
1. Download a new file from Samsung’s website  
2. Write the file to Disc using the CD-RW drive of  
your computer.  
- If the DVD player was successfully updated,  
the disc tray will close and the unit will turn  
off and on.  
When the unit turns on, the Select Menu  
Language screen will appear.  
Note  
3. Press the number buttons to select the desired  
language.  
The CD should be burned following the specs  
below.  
- File System CD-ROM ISO Level.  
- Character set ISO 9660.  
- The burned CD has to be Finalized.  
- Please burn the CD at a low speed.  
Press  
Touche  
1
2
3
4
5
6
for English  
pour Français  
für Deutsch  
Drücken Sie  
Pulsar  
para Español  
per Italiano  
Premere  
Druk op  
voor Nederlands  
Upgrade procedure  
1. Open the disc tray of your DVD1080P8.  
Place the burned disc on the tray. Close the tray.  
The Firmware upgrade screen will appear.  
Note  
- If the “Select Menu Language” doesn’t  
appear, please contact Samsung  
Customer Service.  
- Do not press any button or unplug the  
power cord during the upgrade.  
Old Version : 071109V1.B.1080P8XEG  
New Version : 071129V7.B.1080P8XEG  
- The upgrade procedure may change, refer  
to the web site (www.samsung.com).  
- When software is upgrade, video and audio  
settings you have made will return to their  
default (factory) settings. We recommend  
you write down your settings so that you can  
easily reset them after the upgrade.  
Firmware upgrade  
menu appears  
ENG-58  
Download from Www.Somanuals.com. All Manuals Search And Download.  
REFERENCE  
Troubleshooting  
Before requesting service, please check the following.  
Action  
Problem  
Page  
• Check the batteries in the remote control.  
They may need replacing.  
• Operate the remote control at a distance of no more than 20 feet.  
• Remove batteries and hold down one or more buttons for several minutes to  
drain the microprocessor inside the remote control to reset it. Reinstall  
batteries and try to operate the remote control again.  
No operations can be  
performed with the  
remote control.  
P5  
P8  
Disc does not play.  
• Ensure that the disc is installed with the label side facing up.  
• Check the region number of the DVD.  
• 5.1 channel sound is reproduced only when the following conditions are met :  
1) The DVD player is connected with the proper Amplifier  
5.1 channel sound is  
not being reproduced.  
P18  
2) The disc is recorded with 5.1 channel sound.  
• Check whether the disc being played has the “5.1 ch” mark on the outside.  
• Check if your audio system is connected and working properly.  
• In a SETUP Menu, is the Audio Output set to Bitstream?  
P49~50  
• The features or action cannot be completed at this time because:  
1. The DVD’s software restricts it.  
The  
on screen.  
icon appears  
2. The DVD’s software doesn’t support the feature (e.g., angles).  
3. The feature is not available at the moment.  
4. You’ve requested a title or chapter number or search time that is out of range.  
Disc Menu doesn’t appear.  
• Check if the disc has a Menu.  
Play mode differs from  
the Setup Menu  
selection.  
• Some of the functions selected in the Setup Menu may not work properly if the  
disc is not encoded with the corresponding function.  
P43~57  
The screen ratio  
cannot be changed.  
• The Screen Ratio is fixed on your DVDs.  
P51~53  
P49~50  
• Make sure you have selected the correct Digital Output in the Audio Options  
Menu.  
No audio.  
The screen is blocked  
• Press the  
button (on the front panel) for more than 5 seconds with no disc  
P19  
P54  
inside. All settings will revert to the factory settings.  
• Press the  
button (on the panel) for more than 5 seconds with no disc  
Forgot password  
inside. All settings including the password will revert to the factory settings.  
Don't use this unless absolutely necessary.  
If you experience other  
problems.  
• Go to the contents and find the section of the instruction book that contains  
the explanations regarding the current problem, and follow the procedure once  
again.  
• If the problem still cannot be solved, please contact your nearest Samsung  
authorized service center.  
• Make sure that the disc is not dirty or scratched.  
The picture is noisy or  
distorted  
P4  
Clean the disc.  
ENG-59  
Download from Www.Somanuals.com. All Manuals Search And Download.  
REFERENCE  
Action  
Problem  
Page  
P12~13  
P12~13  
No HDMI output.  
• Check the if the Video output is set to HDMI.  
• Check the connection between the TV and the HDMI jack of DVD player.  
• See if the TV supports this 480p/720p/1080i/1080p DVD player.  
• If snow noise appears on the screen, it means that TV does not support  
HDCP (High-bandwidth Digital Content Protection).  
Abnormal HDMI output  
screen.  
HDMI output Jitter  
• Check if your TV is setup correctly.  
• Screen Jitter may occur when frame rate is converted from 50Hz to 60Hz for  
720P/1080i/1080p HDMI (High Definition Multimedia Interface) Output.  
• Please refer to the user’s manual of your TV.  
P51~53  
ENG-60  
Download from Www.Somanuals.com. All Manuals Search And Download.  
REFERENCE  
Specifications  
Power Requirements  
Power Consumption  
Weight  
AC 120V ~ 60 Hz  
9W (ON condition), 1W (OFF condition)  
0.77 lbs 0.048 oz  
General  
Dimensions  
17.2” (W) X 18” (D) X 1.8” (H)  
+41°F to +95°F  
Operating Temperature Range  
Operating Humidity Range  
10 % to 75 %  
Reading Speed : 3.49 ~ 4.06 m/sec.  
Approx. Play Time  
DVD  
(DIGITAL VERSATILE DISC)  
(Single Sided, Single Layer Disc) : 135 min.  
CD : 5”  
Reading Speed : 4.8 ~ 5.6 m/sec.  
Maximum Play Time : 74 min.  
Disc  
(COMPACT DISC)  
Reading Speed : 4.8 ~ 5.6 m/sec.  
Maximum Play Time : 20 min.  
CD : 3 1/2”  
(COMPACT DISC)  
1 channel : 1.0 Vp-p (75 Ω load)  
Composite Video  
Component Video  
Y : 1.0 Vp-p (75 Ω load)  
Pr : 0.70 Vp-p (75 Ω load)  
Pb : 0.70 Vp-p (75 Ω load)  
480p, 720p, 1080i,1080p  
Video  
Output  
HDMI  
L(1/L), R(2/R)  
2 Channel  
48 kHz Sampling : 4 Hz to 22 kHz  
96 kHz Sampling : 4 Hz to 44 kHz  
*Frequency Response  
Audio  
110 dB  
100 dB  
0.004 %  
*S/N Ratio  
Output  
*Dynamic Range  
*Total Harmonic Distortion  
*: Nominal specification  
- Samsung Electronics Co., Ltd reserves the right to change the specifications with  
out notice.  
- Weight and dimensions are approximate.  
ENG-61  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Contact SAMSUNG WORLD WIDE  
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer  
care center  
.
Region  
Country  
Customer Care Center  
1-800-SAMSUNG(726-7864)  
01-800-SAMSUNG(726-7864)  
1-800-SAMSUNG(726-7864)  
0800-333-3733  
Web Site  
CANADA  
MEXICO  
U.S.A  
North America  
ARGENTINE  
BRAZIL  
0800-124-421 , 4004-0000  
800-SAMSUNG(726-7864)  
00-1800-5077267  
CHILE  
NICARAGUA  
HONDURAS  
COSTA RICA  
ECUADOR  
800-7919267  
0-800-507-7267  
1-800-10-7267  
EL SALVADOR  
GUATEMALA  
JAMAICA  
800-6225  
Latin America  
1-800-299-0013  
1-800-234-7267  
PANAMA  
800-7267  
PUERTO RICO  
REP. DOMINICA  
TRINIDAD & TOBAGO  
VENEZUELA  
COLOMBIA  
BELGIUM  
1-800-682-3180  
1-800-751-2676  
1-800-SAMSUNG(726-7864)  
0-800-100-5303  
01-8000112112  
0032 (0)2 201 24 18  
844 000 844  
Distributor pro Českou republiku:  
Samsung Zrt., česka organizační složka  
Vyskočilova 4, 14000 Praha 4  
CZECH REPUBLIC  
DENMARK  
FINLAND  
70 70 19 70  
www.samsung.com/fi  
030-6227 515  
3260 SAMSUNG ( 0,15/Min),  
08 25 08 65 65 ( 0,15/Min)  
FRANCE  
GERMANY  
HUNGARY  
ITALIA  
01805 - SAMSUNG(726-7864) ( 0,14/Min)  
06-80-SAMSUNG(726-7864)  
800-SAMSUNG(726-7864)  
0035 (0)2 261 03 710  
0900-SAMSUNG(726-7864) ( 0,10/Min)  
815-56 480  
Europe  
LUXEMBURG  
NETHERLANDS  
NORWAY  
POLAND  
0 801 801 881 , 022-607-93-33  
80820-SAMSUNG(726-7864)  
0800-SAMSUNG(726-7864)  
902 10 11 30  
PORTUGAL  
SLOVAKIA  
SPAIN  
SWEDEN  
0771-400 200  
U.K  
0845 SAMSUNG (7267864)  
0818 717 100  
EIRE  
AUSTRIA  
0800-SAMSUNG(726-7864)  
0800-SAMSUNG(726-7864)  
8-800-555-55-55  
SWITZERLAND  
RUSSIA  
KAZAHSTAN  
UZBEKISTAN  
KYRGYZSTAN  
TADJIKISTAN  
UKRAINE  
LITHUANIA  
LATVIA  
8-10-800-500-55-500  
8-10-800-500-55-500  
00-800-500-55-500  
8-10-800-500-55-500  
8-800-502-0000  
CIS  
8-800-77777  
800-7267  
ESTONIA  
800-7267  
AUSTRALIA  
NEW ZEALAND  
CHINA  
1300 362 603  
0800SAMSUNG(726-7864)  
800-810-5858 , 010-6475 1880  
3698-4698  
HONG KONG  
INDIA  
3030 8282 , 1800 110011  
0800-112-8888  
INDONESIA  
JAPAN  
0120-327-527  
Asia Pacific  
MALAYSIA  
PHILIPPINES  
SINGAPORE  
THAILAND  
TAIWAN  
1800-88-9999  
1800-10-SAMSUNG(726-7864)  
1800-SAMSUNG(726-7864)  
1800-29-3232 , 02-689-3232  
0800-329-999  
VIETNAM  
TURKEY  
1 800 588 889  
444 77 11  
Middle East &  
Africa  
SOUTH AFRICA  
U.A.E  
0860-SAMSUNG(726-7864 )  
800-SAMSUNG (726-7864), 8000-4726  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Warranty  
LIMITED WARRANTY TO ORIGINAL PURCHASER  
This SAMSUNG brand product, as supplied and distributed by SAMSUNG ELECTRONICS AMERICA, INC. (SAM-  
SUNG) and delivered new, in the original carton to the original consumer purchaser, is warranted by SAMSUNG against  
manufacturing defects in materials and workmanship for the following limited warranty period:  
One (1) Year Parts / Ninety days (90) Labor  
This limited warranty begins on the original date of purchase, and is valid only on products purchased and used in the  
United States, and does not include transportation, installation, removal or reinstallation. Warranty repairs must be  
performed by SAMSUNG’s authorized service center. To receive warranty service, the original dated bill of sale must be  
presented upon request as proof of purchase to SAMSUNG or SAMSUNG’s authorized service center. Transportation  
to and from the service center is the responsibility of the purchaser.  
SAMSUNG will repair or replace this product, at our option and at no charge with new or reconditioned parts, if found  
to be defective during the limited warranty period specified above. The product must be returned during the warranty  
period with transportation charges prepaid to SAMSUNG’s designated service center. Prior to returning any product for  
warranty service, the purchaser must contact SAMSUNG for problem determination and service procedures. SAM-  
SUNG does not warrant uninterrupted or error-free operation of the product. All replaced parts and products become  
the property of SAMSUNG and must be returned to SAMSUNG. Replacement parts and products assume the  
remaining original warranty, or ninety (90) days, whichever is longer.  
This limited warranty covers manufacturing defects in materials and workmanship encountered in normal, noncom-  
mercial use of this product and shall not apply to the following, including, but not limited to: damage which occurs in  
shipment; applications and uses for which this product was not intended; failures or problems which are caused by  
products or equipment not supplied by SAMSUNG; accidents, misuse, abuse, neglect, misapplication, fire, water, light-  
ning or other acts of nature; incorrect electrical line voltage, fluctuations or surges; damage caused by improper or  
faulty installation; improper connection with any peripheral; product alteration or modification; improper or unautho-  
rized repair; cosmetic damage or exterior finish; product with altered serial numbers; failure to follow operating  
instructions, customer adjustments, maintenance and environmental instructions that are covered and prescribed in  
the instruction book; use of non-SAMSUNG or unauthorized parts, supplies, accessories or equipment which damage  
this product or result in service problems; failures or problems due to incompatibility with other equipment.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Contact SAMSUNG WORLDWIDE  
If you have any questions or comments relating to Samsung products,  
please contact the SAMSUNG customer care center.  
Samsung Electronics America,Inc.  
105 Challenger Road  
Ridgefield Park,NJ 07660-0511  
1-800-SAMSUNG (7267864)  
AK68-01503A-01  
US  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Quick Eagle Networks Network Card 4262 User Guide
Renesas Computer Hardware R0E571370CFK00 User Guide
Renesas Computer Hardware R8C 27 User Guide
Roberts Gorden Patio Heater CTCU 11 User Guide
Samsung Cell Phone DM S105 User Guide
Samsung CRT Television CL 29A5P, CL 29A5W, CL 29A6P, CL 29A6W, CL 29A7P, CL 29A7W, CL 29M6P, CL 29M6W, CL 34M9P User Guide
Sanus Systems TV Video Accessories WFV66 User Guide
Sanyo CRT Television AVM 32F4, AVM32F9 User Guide
Sanyo DVD Player DVD DX517 User Guide
Schumacher Battery Charger 1010 User Guide