1 4 7 7 B
a t i o n
Duo HD Player
u r D u o H D
User’s Manual
BD-UP5000
AK68-01477B
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
key features of your new
Duo HD player
Player Features
Supports a Variety of Video Disc Types
Supports BD, HD DVD, DVD Video, DVD-RW/-R (V mode and finalized only).
HDMI (High Definition Multimedia Interface)
HDMI reduces picture noise by allowing a pure digital video/audio signal path from the player to your TV.
Simplay HD
Simplay HD guarantees that this player has been tested according to
specifications aimed at maximizing the delivery of HD content.
Blu-ray Disc Features
Blu-ray Discs can store 25 GB (single layer) or 50 GB (dual layer) on a single sided disc - about 5 to 10 times the
capacity of a DVD. Blu-ray Discs also support the highest quality HD video available in the industry - Large capacity
means no compromise on video quality. Furthermore, a Blu-ray Disc has the same familiar size and look as DVD.
HD DVD Features
HD DVD is the newest, high definition entry to the popular DVD format.
A HD DVD (dual-layer) disc can store up to 30 GB of data, and a single layer HD DVD can store up to 15 GB. On
one side of a single layer HD DVD, up to 8 hours of high resolution video source with 1125 scanning lines, and up to
48 hours of standard resolution with 525 scanning lines can be stored.
* The following BD/HD DVD Disc features are disc dependant and will vary.
Appearance and navigation of features will also vary from disc to disc.
Not all discs will have the features described below.
Video highlights
The BD-ROM/ HD DVD-ROM format for movie distribution supports three highly advanced video codecs, including
AVC, VC-1, and MPEG-2.
HD video resolutions are also available:
•
•
1920 x 1080 HD
1280 x 720 HD
For High-Definition Playback
To view high-definition contents on a BD/HD DVD Disc, an HDTV (High Definition Television) is required.
Some BD/HD DVD discs may require using the player's HDMI OUT to view high-definition content. The ability to
view high-definition content on BD/HD DVD discs may be limited depending on the resolution of your TV.
2_ English
Download from Www.Somanuals.com. All Manuals Search And Download.
Graphic planes
PLAY MOVIE
LANGUAGES
SCENE SELECTIONS
PREVIEWS
Two individual, full HD resolution (1920x1080) video
layers are available, on top of the HD video layer.
One layer is assigned to video-related graphics (like
subtitles), and the other layer is assigned to interactive
elements, such as buttons or menus. Various wipes,
fades and scroll effects may be available on both layers.
Graphic
Planes
▼
3
4
5
6
7
8
9
10 11
12 13
14 15
Menu graphics
Support full color resolution graphics and animation,
thereby greatly surpassing the capabilities of DVD-Video.
Unlike DVD, Menus can be accessed during video
playback.
HD Video
Menu sounds
When you highlight or select a menu option on a disc, sounds can be heard such as button clicks or a voice-over
explaining the highlighted menu choice.
Multi-page/PopUp Menus
With DVD-Video, playback is interrupted each time a new menu screen
PLAY MOVIE
LANGUAGES
SCENE SELECTIONS
PREVIEWS
is accessed. Due to BD/HD DVD Disc's ability to preload data from the
disc without interrupting playback, a menu may consist of several
pages.
You can browse through the menu pages or select different menu
paths, while the audio and video remain playing in the background.
▼
3
4
5
6
7
8
9
10 11
12 13
14 15
Interactivity
With HD DVD, you can enjoy additional content such as animation on
menu options and the movie, simultaneous playback of main and
secondary movies using PIP (Picture-in-Picture), and the ability to download content via the Internet.
User Browsable Slideshows
With BD/HD DVD Discs, you can browse through various still pictures while the audio remains playing.
Subtitles
Depending on what is contained on the BD/HD DVD Disc, you may be able to select different font styles, sizes and
colors for the subtitles, Subtitles may also be animated, scrolled or faded in and out.
Multi-format System
The HD DVD twin-format disc consists of the HD DVD and DVD layers on a single side.
The HD DVD combi disc consists of the HD DVD and DVD layers on each side.
Internet Connection (LAN Port)
Some HD DVD discs are designed to access a web site,allowing you to view additional content on your player.
WHAT’S INCLUDED
Check for the supplied accessories below.
Composite (Video), Audio L/R Cable
(MF39-00274A)
Batteries for Remote Control (AAA Size)
(4301-001035)
User Manual (AK68-01477B)
Quick Guide (AK68-01480B)
Remote Control (AK59-00075A)
English _3
Download from Www.Somanuals.com. All Manuals Search And Download.
safety information
WARNING
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER(OR BACK).
NO USER-SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
The lighting flash and Arrowhead within CAUTION: TO REDUCE THE RISK OF ELECTRIC
Triangle Is a warning sign alerting you of SHOCK, DO NOT REMOVE COVER (OR BACK) NO
The explanation point within the triangle
is a warning sign alerting you of
important instructions accompanying
the product.
dangerous voltage Inside the product
USER SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
WARNING
•
To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture.
•
To prevent injury, this apparatus must be securely attached to the floor/wall in accordance with the installation instructions.
Note to CATV system installer
This reminder is provided to call CATV system installer’s attention to Article 820-40 of the National Electrical Code
(Section 54 of Canadian Electrical Code, Part I) that provides guidelines for proper grounding and, in particular,
specifies that the cable ground shall be connected to the grounding system of the building as close to the point of
cable entry as practical.
FCC NOTE (for U.S.A):
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15
of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on.
The user is encouraged to try to correct the interference by one or more of the following measures.
•
•
•
•
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect this equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
This class B digital apparatus meets all requirements of the Canadian Interference - Causing Equipment
Regulations.
CLASS 1
LASER PRODUCT
LASER PRODUKT
KLASSE 1
LUOKAN 1 LASER LAITE
KLASS 1 LASER APPARAT
PRODUCTO LÁSER CLASE 1
CLASS 1 LASER PRODUCT
Use of controls, adjustments or performance of procedures other than those specified herein may result in
hazardous radiation exposure.
CAUTION
THIS PRODUCT UTILIZES A LASER. USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF
PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION
EXPOSURE. DO NOT OPEN COVER AND DO NOT REPAIR YOURSELF. REFER SERVICING TO QUALIFIED
PERSONNEL.
4_ safety information
Download from Www.Somanuals.com. All Manuals Search And Download.
Note:
•
This unit can be used only where the power supply is AC 120V, 60Hz. It cannot be used elsewhere.
•
This Duo HD player is designed and manufactured to respond to the Region Management Information.
If the Region number of a BD/DVD disc does not correspond to the Region number of this Duo HD player, the
Duo HD player cannot play the disc.
•
The product unit accompanying this user manual is licensed under certain intellectual property rights of certain
third parties. This product is covered by one or more of the following U.S. patents:
5,060,220 5,457,669 5,561,649 5,705,762 5,987,417 6,043,912 6,222,983 6,272,096 6,377,524 6,377,531
6,385,587 6,389,570 6,408,408 6,466,532 6,473,736 6,477,501 6,480,829 6,556,520 6,556,521 6,556,522
6,578,163 6,594,208 6,631,110 6,658,588 6,674,697 6,674,957 6,687,455 6,697,307 6,707,985 6,721,243
6,721,493 6,728,474 6,741,535 6,744,713 6,744,972 6,765,853 6,765,853 6,771,890 6,771,891 6,775,465
6,778,755 6,788,629 6,788,630 6,795,637 6,810,201 6,862,256 6,868,054 6,894,963 6,937,552
This product is covered by the following U.S. patents:
US4,930,158 US4,930,160
This license is limited to private non-commercial use by end-user consumers for licensed contents.
No rights are granted for commercial use. The license does not cover any product unit other than this product unit
and the license does not extend to any unlicensed product unit or process conforming to ISO/IEC 11172-3 or ISO/
IEC 13818-3 used or sold in combination with this product unit.
The license only covers the use of this product unit to encode and/or decode audio files conforming to the ISO/IEC
11172-3 or ISO/IEC 13818-3. No rights are granted under this license for product features or functions that do not
conform to the ISO/IEC 11172-3 or ISO/IEC 13818-3.
PRECAUTIONS
Important Safety Instructions
Read these operating instructions carefully before using the unit. Follow all the safety instructions listed below. Keep
these operating instructions handy for future reference.
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings, Install in accordance with the manufacturer's instructions.
8) Do not install near any heat sources such as radiators, heat registers, or other apparatus (including amplifiers)
that produce heat.
9) Do not defeat the safety purpose of the polarized or grounding- type plug. A polarized plug has two blades with
one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade
or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an
electrician for replacement of the obsolete outlet.
10) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and
the point where they exit from the apparatus.
11) Only use attachments/accessories specified by the manufacturer.
12) Use only with the cart, stand, tripod, bracket, or table specifi ed by the manufacturer,
or sold with the apparatus. When a cart is used, use caution when moving the cart/
apparatus combination to avoid injury from tip-over.
13) Unplug this apparatus during lightning storms or when unused for long periods of
time.
14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged
in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into
the apparatus the apparatus has been exposed to rain or moisture, does not operate normally, or has been
dropped.
English _5
Download from Www.Somanuals.com. All Manuals Search And Download.
safety information
Handling Cautions
•
•
Before connecting other components to this Duo HD player, be sure to turn them all off.
Do not move the Duo HD player while a disc is being played as the disc may be scratched or broken, or the Duo
HD player internal parts may be damaged.
•
•
•
•
Do not put a flower vase filled with water or any small metal objects on the Duo HD player.
Be careful not to put your hand into the disc tray.
Do not place anything other than the disc in the disc tray.
Exterior interference such as lightning and static electricity can affect normal operation of this Duo HD player. If
this occurs, turn the Duo HD player off and on again with the POWER button, or disconnect and then reconnect
the AC power cord to the AC power outlet. The Duo HD player will operate normally.
•
•
Be sure to remove the disc and turn off the Duo HD player after use.
Disconnect the AC power cord from the AC outlet when you don’t intend to use the Duo HD player for long
periods of time.
•
•
•
Clean the disc by wiping in a straight line from the inside to the outside of the disc.
Do not expose the player to liquid.
When the AC plug is connected to a wall outlet, the player will still draw power (standby mode) when it is turned
off.
Maintenance of Cabinet
For safety reasons, be sure to disconnect the AC power cord from the AC outlet.
•
•
Do not use benzene, thinner, or other solvents for cleaning.
Wipe the cabinet with a soft cloth.
Restrictions on Playback
•
This player may not respond to all operating commands because some Blu-ray, HD DVD, DVD, CD discs allow
specific or limited operation and features during playback.
Please note that this is not a defect in the player.
•
Samsung cannot assure that this player will play every disc bearing the Blu-ray, HD DVD, DVD or CD logo
because disc formats evolve, and problems and errors may occur during the creation of BD, HD DVD, DVD, CD
software and/or the manufacture of discs.
This player also operates differently than a standard DVD player or other AV equipment. Please contact the
SAMSUNG customer care center if you have questions or encounter difficulty in playing Blu-ray, HD DVD, DVD,
CD discs in this player. Also, refer to the rest of this Manual for additional information on playback restrictions.
6_ safety information
Download from Www.Somanuals.com. All Manuals Search And Download.
contents
3
What’s included
KEY FEATURES OF YOUR NEW DUO
HD PLAYER
2
4
5
Warning
Precautions
SAFETY INFORMATION
4
9
Before Reading the User’s Manual
GETTING STAR9TED
10 Disc Type and Characteristics
13 Disc Storage & Management
14 Front Panel
14 Front Panel Display
15 Rear Panel
DESCRIPTION
14
16 Tour of the Remote Control
18 Setting the Remote Control
18 Regarding the Battery
REMOTE CONTROL
16
20
19 Controllable TV Codes
20 Connecting to a TV with an HDMI Cable
21 HDMI Auto Detection Function
22 Connecting to a TV with DVI Cable
23 Connecting to a TV (Component)
24 Connecting to a TV (S-Video)
25 Connecting to a TV(Video)
CONNECTIONS
26 Connecting to an Audio System (2 Channel
Amplifier)
27 Connecting to an Audio System (7.1
Channel Amplifier)
28 Connecting to an Audio System (Dolby
Digital, DTS Amplifier)
29 Connecting to an Audio System (HDMI
supported Amplifier)
30 Connecting to the Internet
31 Before Playing
32 On-Screen Menu Navigation
32 Playing a Disc
33 To play a twin-format HD DVD disc
33 Using the Search and Skip Functions
34 Slow Motion Play/Step Motion Play
35 Setting the Clock
BASIC FUNCTIONS OF YOUR
DUO HD 3PLAY1ER
SYSTEM SETUP
35
36 Setting up the Language Options
LANGUAGE SETUP
36
English _7
Download from Www.Somanuals.com. All Manuals Search And Download.
contents
37 Setting up the Audio Options
39 Setting up the Speaker Options
AUDIO SETUP
37
40 Setting up the Video display/output Options
43 Setting up the HDMI setup options
45 Setting up the Parental Lock
DISPLAY SETUP
40
HDM4I SE3TUP
PARENTAL SETUP
45
47
47 TCP/IP Setting
48 Proxy Setting
48 Cookie Setting
49 Network Throughput
49 NTP Server Setting
49 Mac Address
NETWORK SETUP
50 System Device Management
PERSISTENT STORAGE
MANAGEMENT
50
51 Firmware Upgrade
53 System Information
SYSTEM UPGRADE
51
54 Using the Display Function
55 Using the Disc Menu & Popup/Title Menu
56 Repeat Play
WATCHING A MOVIE
54
57 Selecting the Audio Language
58 Selecting the Subtitle Language
59 Changing the Camera Angle
59 Using the Cursor Function
60 Playing an Audio CD(CD-DA)
60 Audio CD(CD-DA) Screen Elements
LISTENING TO MUSIC
61 Buttons on the Remote Control used for
Audio CD (CD-DA) disc playback
61 Repeat Audio CD(CD-DA)
60
63 Troubleshooting
TROUBLESH6OOT3ING
65 Specifications
APPENDIX
65
8_ contents
Download from Www.Somanuals.com. All Manuals Search And Download.
getting started
BEFORE READING THE USER’S MANUAL
Make sure to check the following terms before reading the user manual.
Icons that will be used in manual
Icon
Term
Definition
BD-ROM
This involves a function available on a BD-ROM.
h
A
Z
C
V
B
M
HD DVD-ROM This involves a function available on a HD DVD-ROM.
This involves a function available on DVD-Video or DVD-R/DVD-RW discs
DVD-VIDEO
that have been recorded and finalized in Video Mode.
DVD-RW
DVD-R
This involves a function available on DVD-RW. (V mode and finalized only)
This involves a function available on DVD-R. (V mode and finalized only)
This involves a function available on a data CD-R (CD-DA format).
Audio CD
This involves tips or instructions on the page that help each function
operate.
Note
About the use of this user’s manual
1) Be sure to be familiar with Safety Instructions before using this product. (See pages 4~6)
2) If a problem occurs, check the Troubleshooting. (See pages 63~64)
Copyright
©2007 Samsung Electronics Co.,Ltd.
All rights reserved; No part or whole of this user’s manual may be reproduced or copied without the
prior written permission of Samsung Electronics Co.,Ltd.
English _9
Download from Www.Somanuals.com. All Manuals Search And Download.
getting started
DISC TYPE AND CHARACTERISTICS
Disc types that can be played
Disc Types
BD-ROM
Disc Logo Recorded content
Disc Shape
Max. Playing minute
Single sided(25GB, 5 inches)
Double sided(50GB, 5 inches)
Single sided(15GB, 5 inches)
Double sided(30GB, 5 inches)
Single sided(5 inches)
Playing time depends
on the Title
AUDIO + VIDEO
HD DVD-ROM
DVD-VIDEO
AUDIO-CD
AUDIO + VIDEO
AUDIO + VIDEO
–
240
480
80
Double sided(5 inches)
Single sided(3 1/2 inches)
Double sided(3 1/2 inches)
Single sided(5 inches)
160
74
AUDIO
Single sided (3 1/2 inches)
20
DVD-RW
(V mode and
finalized only)
480
AUDIO + VIDEO
5 inches (4.7GB)
5 inches (4.7GB)
(EX : Extended Play)
DVD-R
(V mode and
finalized only)
480
AUDIO + VIDEO
(EX : Extended Play)
•
•
This player is compatible with the NTSC color system only.
PAL discs will not play.
Logos of Discs that can be played
Blu-ray Disc
HD DVD
Dolby Digital Plus
Dolby TrueHD
DTS Digital Surround
Digital Audio
NTSC broadcast system in U.S.A,
Canada, Korea, Japan
Stereo
Java
When playing a Dolby TrueHD disc, audio will only be heard over the front left and right speakers.
M
10_ getting started
Download from Www.Somanuals.com. All Manuals Search And Download.
Discs that cannot be played
•
•
•
•
•
Blu-ray Discs with a region code other than "Region A".
BD-R, BD-RE
DVD-Video with a region number other than “1” or “ALL”
HD DVD-R
DVD-RAM
•
•
•
•
3.9 GB DVD-R Disc for Authoring.
DVD-RW(VR mode)
DVD-ROM/PD/MV-Disc, etc
CVD/CD-ROM/CD-RW/CDV/CD-G/CD-I/LD
[Note]
•
Some commercial discs and HD DVD/ DVD discs purchased outside your region may not be playable
with this product. When these discs are played, either “No disc.” or “Please check the regional code
of the disc.” will be displayed.
•
•
If a DVD-R/-RW disc has not been recorded properly in DVD video format, it will not be playable.
The unit cannot play CD-R and DVD-RW/-R recorded content such as divx, avi, mpg, mov, wma,
mp3,digital photo view(JPEG) file.
Region code
Both the Duo HD player and the discs are coded by region. These regional codes must match in order
to play the disc. If the codes do not match, the disc will not play.
The Region Number for this Duo HD player is described on the rear panel of the Duo HD player.
Disc Type
Blu-ray
DVD-VIDEO
Region code
A
1
BD Region Code
Area
A
B
C
North America, Central America, South America, Korea, Japan, Taiwan, Hong Kong and South East Asia.
Europe, Greenland, French territories, Middle East, Africa, Australia and New Zealand.
India, China, Russia, Central and South Asia.
DVD Region Code
Area
The U.S., U.S. territories and Canada
1
2
3
4
5
6
Europe, Japan, the Middle East, Egypt, South Africa, Greenland
Taiwan, Korea, the Philippines, Indonesia, Hong Kong
Mexico, South America, Central America, Australia, New Zealand, Pacific Islands, Caribbean
Russia, Eastern Europe, India, most of Africa, North Korea, Mongolia
China
•
HD DVDs do not currently have Region codes. They however, may be assigned in the future.
Blu-ray Disc Compatibility
Blu-ray Disc is a new and evolving format. Accordingly, disc compatibility issues are possible. Not all
discs are compatible and not every disc will play back. For additional information, refer to the
Compliance and Compatibility Notice section of this Manual. If you encounter compatibility problems,
please contact the SAMSUNG customer care center. This Samsung Duo HD player (BD-UP5000)
supports only the BD-ROM Profile 1 version 1.0 specification. If you want to play later version discs, you
may need to update player's firmware. Please refer to http://www.samsung.com/global/register or
contact SAMSUNG customer care center.
English _11
Download from Www.Somanuals.com. All Manuals Search And Download.
getting started
HD DVD Disc Compatibility
HD DVD is a new format, disc compatibility issues with new and existing format discs are possible.
Not all discs are compatible. If you experience compatibility problems, please contact SAMSUNG
Customer Service.
Playback may not work for some types of discs, or when specific operations, such as angle change and aspect
ratio adjustment, are being performed. Information about the discs is written in detail on the box. Please refer
to this if necessary.
M
Do not allow the disc to become dirty or scratched. Fingerprints, dirt, dust, scratches or deposits of cigarette
smoke on the recording surface may make it impossible to use the disc for playback.
Discs with PAL programs recorded on them cannot be played using this product.
When a BD-Java title is played, loading may take longer than a normal title, or some functions may perform slowly.
Disks that are embedded with the networking features can display a download loading
message in addition to the disk loading message at the start.
Disc Types
❖ BD-ROM
Blu-ray Disc Read Only Memory. A BD-ROM disc contains pre-recorded data. Although a BD-ROM
may contain any form of data, most BD-ROM discs will contain movies in High Definition format, for
playback on Duo HD player's. This unit can play back pre-recorded commercial BD-ROM discs.
❖ HD DVD
•
HD DVD or High-Definition DVD is a high-density optical disc format designed for the storage of
data and high-definition video.
•
HD DVD has a single-layer capacity of 15GB and a dual-layer capacity of 30GB.
❖ DVD-Video
•
A digital versatile disc (DVD) can contain up to 135-minutes of images, 8 audio languages and 32
subtitle languages. It is equipped with MPEG-2 picture compression and Dolby Digital surround,
allowing you to enjoy vivid and clear theatre quality images.
•
•
When switching from the first layer to the second layer of a dual-layered DVD Video disc, there
may be momentary distortion in the image and sound. This is not a malfunction of the unit.
Once a DVD-RW/-R recorded in Video Mode is finalized, it becomes DVD-Video. Pre-recorded
(pre-stamped) commercial DVDs with movies are also referred to as DVD-Videos. This unit can
play back pre-recorded commercial DVD discs (DVD-Video discs) with movies.
❖ Audio CD
•
•
•
An audio disc on which 44.1kHz PCM Audio is recorded.
This unit can play back CD-DA format audio CD-R discs.
The unit may not be able to play some CD-R discs due to the condition of the recording.
❖ CD-R
•
•
•
Use a 700MB(80 minutes) CD-R disc. If possible, do not use a 800MB(90 minutes) or above disc,
as the disc may not play back.
If the CD-R disc was not recorded as a closed session, you may experience delays when playing
back the beginning of the disc or all recorded files may not play.
Some CD-R discs may not be playable with this unit, depending on the device which was used to
burn them. For contents recorded on CD-R media from CDs for your personal use,playability may
vary depending on contents and discs.
❖ DVD-R Disc Playback
•
•
Once a DVD-R recorded in Video Mode is finalized, it becomes DVD-Video.
This unit can play back DVD-R discs recorded and finalized with a Samsung DVD video recorder. It may
not be able to play some DVD-R discs depending on the disc and the condition of the recording.
12_ getting started
Download from Www.Somanuals.com. All Manuals Search And Download.
❖ DVD-RW Disc Playback
•
•
Playback can be performed with DVD-RW discs in the Video Mode and finalized only.
Once a DVD-RW recorded in Video Mode is finalized, it becomes DVD-Video. Ability to play back
may depend on recording conditions.
Disc Format
❖ DVD-RW/-R (V)
•
This is a format that is used for recording data on a DVD-RW or DVD-R disc. The disc can be
played by this Duo HD player once it has been finalized.
•
If a disc that has been recorded in Video Mode by a different maker’s recorder but has not been
finalized, it cannot be played by this Duo HD player.
DISC STORAGE & MANAGEMENT
Disc Handling
•
Use discs with regular shapes. If an irregular disc (a disc with a special shape)
is used, this Duo HD player may be damaged.
❖ Holding discs
•
Avoid touching the surface of a disc where recording is performed.
❖ Blu-ray/HD DVD Discs
•
If the player is not used for a long period of time, remove the Blu-ray/HD
DVD Disc from the player and store it in its case.
•
Be careful not to leave fingerprints or scratches on the surface of the Blu-ray/HD DVD Disc.
❖ DVD-RW and DVD-R
•
Clean with an optional PD disc cleaner (LF-K200DCA1 where available). Do not use cleaners or
cloths for CDs to clean DVD-RW/-R discs.
❖ DVD-Video, Audio-CD
•
Wipe off dirt or contamination on the disc with a soft cloth.
❖ Cautions on handling discs
•
•
Do not write on the printed side with a ball-point pen or pencil.
Do not use record cleaning sprays or antistatic. Also, do not use volatile
chemicals, such as benzene or thinner.
•
Do not apply labels or stickers to discs. (Do not use discs fixed with exposed
tape adhesive or leftover peeled-off stickers.)
•
•
•
Do not use scratch-proof protectors or covers.
Do not use discs printed with label printers available on the market.
Do not load warped or cracked discs.
Disc Storage
Be careful not to harm the disc because the data on these discs is highly vulnerable to the environment.
•
•
•
•
•
Do not keep under direct sunlight.
Keep in a cool ventilated area.
Store vertically.
Keep in a clean protection jacket.
If you move your Duo HD player suddenly from a cold place to a warm place, condensation may generate
on the operating parts and lens and cause abnormal disc playback. If this occurs, wait for two hours before
connecting the plug to the power outlet. Then insert the disc and try to play back again.
English _13
Download from Www.Somanuals.com. All Manuals Search And Download.
description
FRONT PANEL
DISC TRAY
Opens to accept a disc.
OPEN/CLOSE BUTTON
Opens and closes the disc tray.
REMOTE CONTROL SENSOR Detects any signal from the remote control.
PLAY/PAUSE BUTTON
STOP BUTTON
Plays a disc or pauses playback.
Stops disc playback.
SEARCH/SKIP BUTTONS Goes to the next title/chapter/track or goes back to the previous title/chapter/track.
DISPLAY
Displays the playing status, time, etc.
STANDBY INDICATOR
POWER BUTTON
When the unit is first plugged in, this indicator lights.
Turns the Duo HD player on and off.
FRONT PANEL DISPLAY
Title/PlayList/Track indicator.
Playing time/clock/current status
indicator.
Disc type indicators.
Video output resolution indicator.
Pause indicator.
Playback indicator.
14_ description
Download from Www.Somanuals.com. All Manuals Search And Download.
REAR PANEL
A
1
Fan
The fan always revolves when the power is on.
Ensure a minimum of 4 inches of clear space on
all sides of the fan when installing the product.
Connect to a 7.1CH analog input on an A/V amplifier
7.1CH ANALOG
AUDIO OUT
(When connecting to a 5.1 channel home theater or receiver, connect all the Analog
Audio output jacks from the player except for the Surround Back Left/Surround Back
Right outputs)
AUDIO OUT
VIDEO OUT
Connects to the audio input of external equipment using audio cables.
Connects the input of external equipment using a video cable.
COMPONENT
VIDEO OUT
Connects to equipment having Component video input.
DIGITAL AUDIO OUT
(COAXIAL)
Connects to an amplifier having a digital coaxial audio input jack.
DIGITAL AUDIO OUT
(OPTICAL)
Connects to an amplifier having a digital optical audio input jack.
Use a network that is connected to the Internet.
LAN
Use the HDMI cable, connect this HDMI output terminal to the HDMI input terminal on
your TV for the best quality picture.
HDMI OUT
S-VIDEO OUT
Connects the input of external equipment using an S-Video cable.
English _15
Download from Www.Somanuals.com. All Manuals Search And Download.
remote control
TOUR OF THE REMOTE CONTROL
16_ remote control
Download from Www.Somanuals.com. All Manuals Search And Download.
English _17
Download from Www.Somanuals.com. All Manuals Search And Download.
remote control
SETTING THE REMOTE CONTROL
You can control certain functions of your TV with this remote control.
Control function buttons include : TV POWER, CH ,., VOL + –, TV MUTE, TV INPUT SEL., DIRECTION/
ENTER button. However, the DIRECTION/ENTER button can only operate when the TV INPUT SEL. button has
been selected.
To determine whether your television is compatible, follow the instructions below.
1. Switch your television on.
2. Point the remote control towards the television.
3. Press and hold the TV POWER button and enter the two-figure code corresponding to the brand of
your television, by pressing the appropriate number buttons. (see the next page for the code list).
If your television is compatible with the remote control, it will switch off.
It is now programmed to operate with the remote control.
If several codes are indicated for your television brand, try each one in turn until you find one that works.
M
If you replace the remote control's batteries, you must set the brand code again.
You can then control the television using the following buttons after pressing the TV button.
Button
Function
TV POWER
TV INPUT SEL.
TV VOL (+ –)
Used to switch the television on and off.
Used to select an external source.
Used to adjust the volume of the television.
Used to select the desired channel.
Used to toggle the sound on and off.
TV CH (,.
)
TV MUTE
Used to move up/down/left/right (▲, ▼, ◄, ►) and to select a desired item.
*(only works under the TV INPUT SEL. button selected)
DIRECTION/ENTER
The functions listed above will not necessarily work on all televisions. If you encounter problems, operate the
television directly.
M
REGARDING THE BATTERY
If the remote does not operate properly:
•
•
•
•
Check the polarity + – of the batteries (Dry-Cell)
Check if the batteries are drained.
Check if remote sensor is blocked by obstacles.
Check if there is any fluorescent lighting nearby.
Dispose of batteries according to local environmental regulations. Do not put them in the
household trash.
18_ remote control
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTROLLABLE TV CODES
Brand
Code
SAMSUNG
TV POWER+01, +02, +03, +04, +05, +06, +07, +08, +09
TV POWER+82
AIWA
ANAM
TV POWER+10, +11, +12, +13, +14, +15, +16, +17, +18
TV POWER+57
BANG & OLUFSEN
BLAUPUNKT
BRANDT
BRIONVEGA
CGE
TV POWER+71
TV POWER+73
TV POWER+57
TV POWER+52
CONTINENTAL EDISON
DAEWOO
EMERSON
FERGUSON
FINLUX
TV POWER+75
TV POWER+19, +20, +23, +24, +25, +26, +27, +28, +29, +30, +31, +32, +33, +34
TV POWER+64
TV POWER+73
TV POWER+06, +49, +57
TV POWER+57
FORMENTI
FUJITSU
TV POWER+84
GRADIENTE
GRUNDIG
HITACHI
TV POWER+70
TV POWER+49, +52, +71
TV POWER+60, +72, +73, +75
TV POWER+52
IMPERIAL
JVC
TV POWER+61, +79
LG
TV POWER+06, +19, +20, +21, +22, +78
TV POWER+06, +69
LOEWE
LOEWE OPTA
MAGNAVOX
METZ
TV POWER+06, +57
TV POWER+40
TV POWER+57
MITSUBISHI
MIVAR
TV POWER+06, +48, +62, +65
TV POWER+52, +77
NEC
TV POWER+83
NEWSAN
NOBLEX
TV POWER+68
TV POWER+66
NOKIA
TV POWER+74
NORDMENDE
PANASONIC
PHILIPS
TV POWER+72, +73, +75
TV POWER+53, +54, +74, +75
TV POWER+06, +55, +56, +57
TV POWER+06, +56, +57
TV POWER+58, +59, +73, +74
TV POWER+06, +56
PHONOLA
PIONEER
RADIOLA
RADIOMARELLI
RCA
TV POWER+57
TV POWER+45, +46
REX
TV POWER+74
SABA
TV POWER+57, +72, +73, +74, +75
TV POWER+74
SALORA
SANYO
TV POWER+41, +42, +43, +44, +48
TV POWER+06
SCHNEIDER
SELECO
TV POWER+74
SHARP
TV POWER+36, +37, +38, +39, +48
TV POWER+71
SIEMENS
SINGER
TV POWER+57
SINUDYNE
SONY
TV POWER+57
TV POWER+35, +48
TELEAVA
TELEFUNKEN
THOMSON
THOMSON ASIA
TOSHIBA
WEGA
TV POWER+73
TV POWER+67, +73, +75, +76
TV POWER+72, +73, +75
TV POWER+80, +81
TV POWER+47, +48, +49, +50, +51, +52
TV POWER+57
YOKO
TV POWER+06
ZENITH
TV POWER+63
English _19
Download from Www.Somanuals.com. All Manuals Search And Download.
connections
This section involves various methods of connecting the Duo HD player to other
external components such as a TV.
CONNECTING TO A TV WITH AN HDMI CABLE
1. Using an HDMI-HDMI cable (not included) connect the HDMI OUT terminal on the rear of the Duo HD player to
the HDMI IN terminal of your TV.
2. Press the input selector on your TV remote control until the HDMI signal from the Duo HD player appears on
your TV screen.
•
If you have set the remote control to properly operate with your TV (see pages 18~19), press the TV INPUT
SEL. button on the remote control and select HDMI as the external source of the TV.
HDMI cable
(not included)
If the HDMI cable is connected or removed during playback of a CDDA, the player will stop playing.
M
20_ connections
Download from Www.Somanuals.com. All Manuals Search And Download.
HDMI AUTO DETECTION FUNCTION
The player's video output will automatically change to HDMI output resolution when connecting an HDMI cable
while power is on (see page 42).
Depending on your TV, certain HDMI output resolutions may not work.
M
Please refer to the user's manual of your TV.
If an HDMI or HDMI-DVI cable is connected from the player to a TV, the Duo HD player’s output is set to HDMI/
DVI output resolution automatically within 10 seconds.
If Component and HDMI are both connected, HDMI mode is automatically selected. (See page 42)
When you connect the player to the TV using the HDMI cable for the first time or to a new TV, the HDMI output
resolution will be automatically set to the highest provided by the TV.
If you connect a Samsung TV to the Duo HD player using an HDMI cable, the player can be easily operated
using the TV remote control. (This is only available with Samsung TVs that support the Anynet+ feature.) (See
pages 43~44)
•
•
HDMI (High Definition Multimedia Interface)
HDMI is an interface that enables the digital transmission of video and audio data with just a single
connector.
Using HDMI, the Duo HD player transmits a digital video and audio signal and displays a vivid picture
on a TV having an HDMI input jack.
HDMI connection description
HDMI connector - Supports video and digital audio data (LPCM or Bitstream).
- HDMI outputs only a pure digital signal to the TV.
- If your TV does not support HDCP (High-bandwidth Digital Content Protection), random noise
appears on the screen.
•
Why does Samsung use HDMI?
Analog TVs require an analog video/audio signal. However, when playing a BD/HD DVD/DVD, the
data ransmitted to a TV is digital. Therefore either a digital-to-analog converter (in the Duo HD player)
or an analog-to-digital converter (in the TV) is required. During this conversion, the picture quality is
degraded due to noise and signal loss. HDMI technology is superior because it requires no D/A
conversion and is a pure digital signal from the player to your TV.
•
•
What is the HDCP?
HDCP (High-band width Digital Content Protection) is a system for protecting BD/HD DVD/DVD
content outputted via HDMI from being copied. It provides a secure digital link between a video
source (PC, DVD. etc) and a display device (TV, projector . etc). Content is encrypted at the source
device to prevent unauthorized copies from being made.
What is Anynet+?
Anynet+ is a convenient function that offers linked operation of this unit through Samsung TVs with the
Anynet+ feature.
- If your Samsung TV has an
logo, then it supports the Anynet+ function.
- If you turn on the player and insert a disc, the player will start playing the disc, and the TV will turn on
automatically and switch to HDMI mode.
- If you turn on the player and press the Play button with a disc already inserted,the TV will
immediately turn on and switch to HDMI mode.
English _21
Download from Www.Somanuals.com. All Manuals Search And Download.
connections
CONNECTING TO A TV WITH DVI CABLE
1. Using the HDMI-DVI cable (not included), connect the HDMI OUT terminal on the rear of the Duo HD player to
the DVI IN terminal of your TV.
2. Using the audio cables, connect the AUDIO (red and white) OUT terminals on the rear of the Duo HD player to
the AUDIO (red and white) IN terminals of your TV.
Turn on the Duo HD player and TV.
3. Press the input selector on your TV remote control until the DVI signal from the Duo HD player appears on your
TV screen.
•
If you have set the remote control to properly operate with your TV (see pages 18~19), press the TV INPUT
SEL. button on the remote control and select HDMI as the external source of the TV.
Connecting the HDMI cable while the Duo HD player's power is on, the player's video output will automatically
change to HDMI mode (see page 42).
Depending on your TV, certain HDMI output resolutions may not work.
M
Please refer to the user's manual of your TV.
If an HDMI or HDMI-DVI cable is plugged into TV, the Duo HD player’s output resolution is set to HDMI/DVI
automatically within 10 seconds.
If Component and HDMI are both connected, HDMI mode is automatically selected. (See page 42)
When you connect the player to the TV using the HDMI cable for the first time or to a new TV, the HDMI output
resolution will be automatically set to the highest provided by the TV
If the HDMI cable is connected or removed during playback of a CDDA, the player will stop playing.
Audio Cable
HDMI-DVI cable
(not included)
Red
White
22_ connections
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTING TO A TV (COMPONENT)
- Connecting to your TV using Component video cables.
- You will enjoy high quality and accurate color reproduction images. Component video separates the picture
element into black and white(Y), blue(PB), red(PR) signals to present clear and clean images. (Audio signals are
delivered through the audio output.)
1. Using Component video cables (not included) , connect the COMPONENT VIDEO OUT terminals on the rear of
the Duo HD player to the COMPONENT IN terminals of your TV.
2. Using the audio cables, connect the AUDIO (red and white) OUT terminals on the rear of the Duo HD player to
the AUDIO (red and white) IN terminals of your TV. Turn on the Duo HD player and TV.
3. Press the input selector on your TV remote control until the Component signal from the Duo HD player appears
on the TV screen.
•
If you have set the remote control to properly operate with your TV (see pages 18~19), press the TV INPUT
SEL. button on the remote control and select COMPONENT as the external source of the TV.
Audio Cable
Component cable
(not included)
Green
Blue
Red
White
Depending on the manufacturer, the component terminals on your TV may be marked “R-Y, B-Y, Y” or “Cr,
Cb, Y” instead of “Pr, Pb, Y”. The number and position of terminals may vary depending on the TV set. Please
refer to the user's manual of your TV.
M
You can select from a variety of resolution settings such as 1080i, 720p, 480p and 480i, depending on the
disc type. (See page 42)
The actual resolution may differ from the setting in the SETUP menu if both Component and HDMI cables are
connected. The resolution may also be different depending on the disc. (See page 42)
In DVD playback, if both HDMI and Component jacks are connected and you select the Component mode, the
Display Setup menu will show the output resolution as 1080p. The resolution is actually 480i.
English _23
Download from Www.Somanuals.com. All Manuals Search And Download.
connections
CONNECTING TO A TV (S-VIDEO)
- Connecting to your TV using an S-Video cable.
- You will enjoy high quality images. S-Video separates the picture element into black and white(Y) and color(C)
signals to present clearer images than regular video input mode.
(Audio signals are delivered through the audio output.)
1. Using an S-Video cable (not included), connect the S-VIDEO OUT terminal on the rear of the Duo HD player to
the S-VIDEO IN terminal of your TV.
2. Using the audio cables, connect the AUDIO (red and white) OUT terminals on the rear of the
Duo HD player to the AUDIO (red and white) IN terminals of your TV. Turn on the Duo HD player and TV.
3. Press the input selector on your TV remote control until the S-Video signal from the Duo HD player appears on
your TV screen.
•
If you have set the remote control to properly operate with your TV (see pages 18~19), press the TV INPUT
SEL. button on the remote control and select S-VIDEO as the external source of the TV.
S-Video Cable
(not included)
Audio Cable
Red
White
The S-VIDEO source is always output in 480i resolution regardless of the resolution set in the SETUP menu.
(See page 42)
M
24_ connections
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTING TO A TV(VIDEO)
1. Using video/audio cables, connect the VIDEO (yellow) / AUDIO (red and white) OUT terminals on the rear of
the Duo HD player to the VIDEO (yellow) / AUDIO (red and white) IN terminals of your TV.
2. Turn on the Duo HD player and TV.
3. Press the input selector on your TV remote control until the Video signal from the Duo HD player appears on the
TV screen.
•
If you have set the remote control to properly operate with your TV (see pages 18~19), press the TV INPUT
SEL. button on the remote control and select VIDEO as the external source of the TV.
Yellow
Red
White
Noise may be generated if the audio cable is placed too close to the power cable.
M
If you want to connect to an Amplifier, please refer to the Amplifier connection pages. (See pages 26~29)
The number and position of terminals may vary depending on your TV set. Please refer to the user's manual of
your TV.
If there is one audio input terminal on the TV, connect it to the [AUDIO OUT][left] (white) terminal of the Duo HD
player.
The VIDEO source is always output in 480i resolution regardless of the resolution set in the SETUP menu.
(See page 42)
English _25
Download from Www.Somanuals.com. All Manuals Search And Download.
connections
CONNECTING TO AN AUDIO SYSTEM (2 CHANNEL AMPLIFIER)
1. Using the audio cables, connect the AUDIO (red and white) OUT terminals on the rear of the Duo HD player to
the AUDIO (red and white) IN terminals of your Amplifier.
2. Using the video signal cable(s), connect the HDMI, COMPONENT, S-VIDEO, or VIDEO OUT terminals on the
rear of the Duo HD player to the HDMI, COMPONENT, S-VIDEO, or VIDEO IN terminal of your TV as
described on pages 20 to 25.
3. Turn on the Duo HD player, TV and Amplifier.
4. Press the input select button of the Amplifier to select the external input in order to hear sound from
the Duo HD player. Refer to your Amplifier's user manual to set the Amplifier's audio input.
Audio Cable
2-Channel stereo amp
Red
White
Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of
Dolby Laboratories.
M
Manufactured under license under U.S. Patent #: 5,451,942 & other U.S. and worldwide patents issued &
pending. DTS and DTS Digital Out are registered trademarks and the DTS logos and Symbol are trademarks of
DTS, Inc. © 1996-2007 DTS, Inc. All Rights Reserved.
26_ connections
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTING TO AN AUDIO SYSTEM (7.1 CHANNEL AMPLIFIER)
1. Using the audio cables, connect the 7.1 ANALOG AUDIO OUT (Front R, Front L, CENTER, SUBWOOFER,
Surround L, Surround R, SURR.BACK L , SURR.BACK R) terminals on the rear of the Duo HD player to the
7.1 Channel ANALOG AUDIO IN (Front R, Front L, CENTER, SUBWOOFER, Surround L, Surround R,
SURR.BACK L , SURR.BACK R) terminals of your Amplifier.
2. Using the video signal cable(s), connect the HDMI, COMPONENT, S-VIDEO, or VIDEO OUT terminals on the
rear of the Duo HD player to the HDMI, COMPONENT, S-VIDEO, or VIDEO IN terminal of your TV as
described on pages 20 to 25.
3. Turn on the Duo HD player, TV and Amplifier.
4. Press the input select button of the Amplifier to select external input in order to hear sound from
the Duo HD player. Refer to your Amplifier's user manual to set the Amplifier's audio input.
7.1 Channel Amplifier
Please turn the volume down when you turn on the Amplifier. Sudden loud sound may cause damage to the
speakers and your ears.
M
Please set the audio in the menu screen according to the Amplifier. (See pages 37~38)
The position of terminals may vary depending on the Amplifier. Please refer to the user's manual of your Amplifier.
The front left and right outputs on your player and 7.1 channel amplifier must be connected to hear disc menu
audio from certain Blu-Ray/HD DVD discs.
When connecting to a 5.1 channel home theater or receiver, connect all the Analog Audio output jacks from
the player except for the Surround Back Left/Surround Back Right outputs.
English _27
Download from Www.Somanuals.com. All Manuals Search And Download.
connections
CONNECTING TO AN AUDIO SYSTEM
(DOLBY DIGITAL, DTS AMPLIFIER)
1. If using an optical cable (not included), connect the DIGITAL AUDIO OUT (OPTICAL) terminal on the rear of the
Duo HD player to the DIGITAL AUDIO IN (OPTICAL) terminal of your Amplifier.
If using a coaxial cable (not included), connect the DIGITAL AUDIO OUT (COAXIAL) terminal on the rear of the
Duo HD player to the DIGITAL AUDIO IN (COAXIAL) terminal of the Amplifier.
2. Using the video signal cable(s), connect the HDMI , COMPONENT, S-VIDEO, or VIDEO OUT terminals on the
rear of the Duo HD player to the HDMI, COMPONENT, S-VIDEO, or VIDEO IN terminals of your TV as
described on pages 20 to 25.
3. Turn on the Duo HD player, TV, and Amplifier.
4. Press the input select button of the Amplifier to select the external input in order to hear sound from
the Duo HD player. Refer to your Amplifier's user manual to set the Amplifier's audio input.
OR
Please turn the volume down when you turn on the Amplifier. Sudden loud sound may cause damage to the
speakers and your ears.
M
Please set the audio in the menu screen according to the Amplifier. (See pages 37~38)
The position of terminals may vary depending on the Amplifier. Please refer to the user's manual of your Amplifier.
When using this connection, discs with LPCM audio soundtracks will only be heard over the front two
channels.
28_ connections
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTING TO AN AUDIO SYSTEM
(HDMI SUPPORTED AMPLIFIER)
1. Using the HDMI-HDMI cable (not included), connect the HDMI OUT terminal on the rear of the Duo HD player to
the HDMI IN terminal of your Amplifier.
2. Using the HDMI-HDMI cable, connect the HDMI OUT terminal of the Amplifier to the HDMI IN terminal of your
TV.
3. Turn on the Duo HD player, TV, and Amplifier.
4. Press the input select button of the Amplifier to select external input in order to hear sound from
the Duo HD player. Refer to your Amplifier's user manual to set the Amplifier's audio input.
Please turn the volume down when you turn on the Amplifier. Sudden loud sound may cause damage to the
speakers and your ears.
M
Please set the audio in the menu screen according to the Amplifier. (See pages 37~38)
The position of terminals may vary depending on the Amplifier. Please refer to the user's manual of your Amplifier.
English _29
Download from Www.Somanuals.com. All Manuals Search And Download.
connections
CONNECTING TO THE INTERNET
By connecting your Duo HD Player to the Internet, you may be able to access and enjoy
additional content with your HD DVD disc.
Some HD DVD Sites provide downloadable control programs for improved interactivity.
You can also update the player’s firmware via the Internet when available.
1. Using the Direct LAN Cable (UTP cable), connect the LAN terminal on the rear of the Duo HD player to the LAN
terminal of your modem.
To LAN port
Connecting using a router
(e.g. DSL)
Broadband modem
(with integrated router)
Broadband modem
Router
Broadband
service
Broadband
service
To LAN port
To LAN port
Internet access may not be allowed, depending on the router you use or the ISP’s policy.
For more information, contact your ISP (Internet Service Provider).
M
For DSL users, please use the router to make network connection.
Internet connectivity with HD DVD depends on the disc’s content.
30_ connections
Download from Www.Somanuals.com. All Manuals Search And Download.
basic functions of your
Duo HD player
This section introduces basic playback functions and playback by disc type.
BEFORE PLAYING
•
•
Turn on your TV and set it to the correct Video Input (the input the Duo HD player is connected to).
If you connected an external Audio System, turn on your Audio System and set it to the correct Audio Input.
After plugging in the player, the first time you press the POWER button, this screen comes up:
If you want to select a language, press a NUMBER button.
(This screen will only appear when you plug in the player for
the first time.) If the language for the startup screen is not set,
the settings may change whenever you turn the power on or
off. Therefore, make sure that you select the language you
MENU LANGUAGE SELECTION
Press 1 for English
Pulsar 2 para Español
Touche 3 pour Français
Macrovision : UBS01
want to use. Once you select a menu language, you can
change it by pressing the
button on the front panel of the
unit for more than 5 seconds with no disc in the unit. Then the
MENU LANGUAGE SELECTION window appears again
where you can reset your preferred language.
Discs which cannot be played on this player.
M
• BD-R
• BD-RE
• DVD-ROM
• CVD
• HD DVD-R
• DVD-RAM
• CD-I
• DVD+RW
• CDV
• CD-RW
• DVD+R
• CD-ROM
• Super Audio CD(except CD layer)
Ability to play back may depend on recording conditions.
• DVD-R • DVD-RW (V mode)
• CDGs play audio only, not graphics.
• CD-R
• The unit may not play certain CD-R and DVD-R due to the disc type or recording conditions.
Blu-ray/HD DVD is a new and evolving format. Accordingly, disc compatibility issues with new and existing
format discs are possible. Not all discs are compatible and not every disc will playback.
For additional information, refer to the Disc Type and Characteristics and Compliance and Compatibility Notice
sections of this Manual. If you encounter compatibility problems, please contact SAMSUNG customer care
center.
The unit cannot play CD-R and DVD-RW/-R recorded content such as divx, avi, mpg, mov, wma, mp3,digital
photo view(JPEG) file.
English _31
Download from Www.Somanuals.com. All Manuals Search And Download.
basic functions of your
Duo HD player
ON-SCREEN MENU NAVIGATION
Video
System Setup
System Information
Time Zone
Music
Clock Set
Language Setup
Audio
Setup
Persistent Storage Management
System Update
Subtitle
Disc Menu
Menu
Twin Format Disc
Audio Setup
Digital Output
PCM Down Sampling
Dynamic Compression
Speaker Setup
Display Setup
TV Aspect
Movie Frame (24 Fs)
Resolution
Screen Message
Front Display
HDMI Setup
Anynet+ (HDMI-CEC)
HDMI Format
Sharpness
Network Setup
TCP/IP
DVD Noise Reduction
Proxy
Cookie
Network Throughput
NTP Server
MAC Address
Parental Setup
PLAYING A DISC
1. Press the OPEN/CLOSE ( ) button.
The STANDBY indicator light goes out and the tray opens.
2. Place a disc gently into the tray with the disc’s label facing up.
3. Press the PLAY/PAUSE ( ) button or OPEN/CLOSE ( ) button to close the disc tray.
When you stop disc play, the player remembers where you stopped, so when you press PLAY/PAUSE (
button again, it will pick up where you left off.
)
M
Press the STOP ( ) button twice during playback to disable the Resume function.
To pause the playback, press the PLAY/PAUSE ( ) button during playback.
To resume, press the PLAY/PAUSE ( ) button once again.
If the player is left in the stop mode more than 10 minutes without any user interface, a screen saver will
appear on your TV. If the player is left in the screen saver mode for more than 30 minutes, the power will
automatically turn off except during playback of an CDDA (Automatic Power-Off Function).
32_ basic functions
Download from Www.Somanuals.com. All Manuals Search And Download.
TO PLAY A TWIN-FORMAT HD DVD DISC
A
To play a twin-format HD DVD disc, you should select HD DVD or DVD before inserting the disc.
This can be enabled only for a twin-format HD DVD disc.
1. With the unit in Stop mode, press the MENU button.
2. Press the ▲▼ buttons to select Setup, then press the ENTER or
►
button.
3. Press the ▲▼ buttons to select System Setup, then press the ENTER or
►
button.
button.
4. Press the ▲▼ buttons to select Twin Format Disc, then press the ENTER or
►
5. Select HD DVD or DVD on the menu then press ENTER.
You cannot change the format during playback.
M
USING THE SEARCH AND SKIP FUNCTIONS
During play, you can search quickly through a chapter or track, and use the skip function to jump to the next
selection.
hAZCV
Searching through a Chapter or Track
During playback, press the SEARCH (
) button.
If you want to search at a faster speed on the BD/HD DVD/DVD, press this button.
If you press the SEARCH ( ) button,
X2 X4 X8 X16 X32
If you press the SEARCH ( ) button,
X2 X4 X8 X16 X32
•
•
X128
X128
•
No sound is heard during search mode.
M
hAZCV
Skipping Tracks
During playback, press the SKIP (
) button.
When playing a BD/HD DVD/DVD, if you press the SKIP ( ) button, it moves to the next chapter. If you
press the SKIP ( ) button, it moves to the beginning of the chapter. One more press makes it move to
the beginning of the previous chapter.
English _33
Download from Www.Somanuals.com. All Manuals Search And Download.
basic functions of your
Duo HD player
SLOW MOTION PLAY/STEP MOTION PLAY
hAZCV
Slow Motion Play
In pause or step mode, press the SLOW button on the remote control for Slow Motion play.
•
If you press the SLOW button,
1/8
1/4
1/2
•
To return to normal speed playback, press the PLAY/PAUSE ( ) button.
This ( ) icon indicates an invalid button press.
No sound is heard during slow mode.
M
Slow motion operates only in the forward direction.
hAZCV
Step Motion Play
Press the STEP button on the remote control during play for Step Motion play.
•
•
•
Each time the button is pressed a new frame will appear.
When the STEP button is pressed, the next frame will be activated.
Press the PLAY/PAUSE ( ) button to resume normal play.
No sound is heard during step mode.
M
Step motion operates only in the forward direction.
34_ basic functions
Download from Www.Somanuals.com. All Manuals Search And Download.
system setup
For your convenience, you can set this player’s features for the best use in your
home environment.
SETTING THE CLOCK
Choose your time zone
1. With the unit in Stop mode, press the MENU button.
System Information
Time Zone
Music
Setup
2. Press the ▲▼ buttons to select Setup, then press the
ENTER or button.
3. Press the ▲▼ buttons to select System Setup, then
press the ENTER or button.
4. Press the ▲▼ buttons to select Time Zone, then press
the ENTER or button.
System Setup
►
No Disc
Language Setup
Audio Setup
Clock Set
Persistent Storage Management
System Update
►
Display Setup
HDMI Setup
Twin Format Disc
:
HD DVD
Network Setup
Parental Setup
►
5. Use the ▲▼ button to place the cursor to the appropriate
time zone for your area and press the ENTER button.
System Information
Music
Set
Time Zone
Hawaii
No Disc
Alaska
Pacific
ment
Mountain
Central
Eastern
D DVD
Atlentic
Newfoundland
Parental Setup
You should set NTP Server to On before you can configure the correct time setting for your area.
(see page 49)
M
Set the clock
System Information
Time Zone
To setup, follow steps 1 and 3 above.
Music
Setup
4. Press the ▲▼ buttons to select Clock Set, then press the
System Setup
Clock Set
No Disc
ENTER or
►
button.
Language Setup
Audio Setup
Persistent Storage Management
System Update
5. Press the ◄► buttons to move to “da.”(date),”hr”
(hour),”min” (minute), and "am/pm" Set the date and time
by pressing the ▲▼ buttons, then press the ENTER
button.
Display Setup
HDMI Setup
Twin Format Disc
:
HD DVD
Network Setup
Parental Setup
System Information
Time Zone
Music
Setup
System Setup
Clock Set
No Disc
Clock Set
da.
ment
hr. min. am/pm
OCT/01/2007
02 05 PM
Monday
Return
D DVD
Save
²
Network Setup
Parental Setup
English _35
Download from Www.Somanuals.com. All Manuals Search And Download.
language setup
SETTING UP THE LANGUAGE OPTIONS
If you set the audio, subtitle, disc menu and player menu, in advance, they will come up automatically every time
you watch a movie.
1. With the unit in Stop mode, press the MENU button.
System Setup
Music
Setup
2. Press the ▲▼ buttons to select Setup, then press the
ENTER or button.
Language Setup
No Disc
No Disc
No Disc
►
Audio Setup
Display Setup
HDMI Setup
Network Setup
Parental Setup
3. Press the ▲▼ buttons to select Language Setup, then
press the ENTER or
►
button. Language setup menu will
System Setup
Music
Setup
be displayed.
Language Setup
Audio
:
Original
Audio Setup
Subtitle
Disc Menu
Menu
:
:
:
Automatic
English
Display Setup
HDMI Setup
English
Network Setup
Parental Setup
4. Press the ▲▼ buttons to select the desired language
option, press the ENTER or button.
►
System Setup
Music
Setup
Language Setup
Audio
Original
English
Audio Setup
Subtitle
Disc Menu
Menu
•
•
•
•
Audio : For the disc audio language.
Subtitle : For the disc subtitles.
Disc Menu: For the disc menu contained on the disc
Menu: For the on-screen menu of your Duo HD player.
Français
Display Setup
HDMI Setup
Deutsch
Español
Italiano
Network Setup
Parental Setup
5. Press the ▲▼ buttons to select the desired language,
then press the ENTER button.
Press the RETURN or ◄ button to return to the previous menu. Press the MENU button to exit the menu.
M
The selected language will only appear if it is supported on the disc.
36_ language setup
Download from Www.Somanuals.com. All Manuals Search And Download.
audio setup
SETTING UP THE AUDIO OPTIONS
Allows you to set up the Audio device and sound status depending on the audio system being used with the player.
System Setup
1. With the unit in Stop mode, press the MENU button.
Language Setup
Music
2. Press the ▲▼ buttons to select Setup, then press the
Audio Setup
Setup
No Disc
ENTER or
►
button.
Display Setup
HDMI Setup
Network Setup
Parental Setup
3. Press the ▲▼ buttons to select Audio Setup, then press
the ENTER or button.
ysem Seu
Language Setup
Music
Setup
►
Audio Setup
Digital Output
:
PCM
No Disc
Display Setup
HDMI Setup
PCM Down Sampling
Dynamic Compression
Speaker Setup
:
:
On
On
Network Setup
Parental Setup
4. Press the ▲▼ buttons to select the desired audio option
from the options described below, then press the ENTER
or
►
button.
5. Press the ▲▼ buttons to select the desired item, then
press the ENTER button.
Press the RETURN or ◄ button to return to the previous menu. Press the MENU button to exit the menu.
M
Digital Output
BD and HD DVD discs may include three audio streams.
- Primary Audio : Main audio sound track of the disc
- Secondary Audio : Provides audio for the PIP window of an HD DVD
System Setup
Language Setup
Music
Setup
Audio Setup
Digital Output
PCM
No Disc
Bitstream(Re-encode)
Display Setup
HDMI Setup
PCM Down Sampling
Dynamic Compression
Speaker Setup
:
Bitstream(Audiophile)
- Effect Audio : You will hear a sound every time an item is
selected in a BD/HD DVD menu.
On
Network Setup
Parental Setup
•
PCM : Select this when your equipment (Home theater or
Receiver) does not decode Dolby Digital. Primary,
Secondary and Effect audio is possible.
•
•
Bitstream(Re-encode) : Re-encodes the Primary,
Secondary and Effect audio streams for DTS.
Bitstream(Audiophile) : Provides a higher level of audio quality when watching a disc. Only Primary
audio (main movie soundtrack) will be heard.
If you have selected a LPCM sound track on a disc, the output will automatically be set to PCM.
M
Be sure to select the correct Digital Output or you will hear no sound or a loud noise.
When playing a Dolby Digital movie make sure the Digital Output is set to Bitstream.
If the HDMI device (Receiver, TV) is not compatible with compressed formats (Dolby digital, DTS), the audio
signal outputs as PCM.
Secondary and Effect audio will not be heard with regular DVDs.
Some BD and HD DVD discs do not have Secondary and Effect audio.
English _37
Download from Www.Somanuals.com. All Manuals Search And Download.
audio setup
PCM Down Sampling
•
On : Select this when the Amplifier connected to the player
is not 96KHz compatible. 96KHz signals will be down
converted to 48KHz
System Setup
Language Setup
Digital Output
:
:
:
PCM
Music
Setup
Audio Setup
PCM Down Sampling
On
No Disc
Off
On
Display Setup
HDMI Setup
Dynamic Compression
Speaker Setup
•
Off : Select this when the Amplifier connected to the player
is 96KHz compatible. Signals will be output without any
changes.
Network Setup
Parental Setup
Even when PCM Down Sampling is set to Off, some discs will only output downsampled audio through the
coaxial and optical digital outputs.
M
HDMI
•
If your TV is not compatible with compressed multi-channel formats (Dolby Digital, DTS), you should
set Digital Audio to PCM.
•
If your TV is not compatible with LPCM sampling rates over 48kHz, you should set PCM Down
Sampling to On.
Dynamic Compression
This is only active when a Dolby Digital signal is detected.
System Setup
Digital Output
:
:
PCM
On
Language Setup
Music
Setup
PCM Down Sampling
•
Off : You can enjoy the movie with the standard Dynamic
Range.
Audio Setup
Dynamic Compression
Speaker Setup
On
No Disc
Off
Display Setup
HDMI Setup
•
On : When Movie soundtracks are played at low volume or
from smaller speakers, the system can apply appropriate
compression to make low-level content more intelligible and
prevent dramatic passages from getting too loud.
Network Setup
Parental Setup
38_ audio setup
Download from Www.Somanuals.com. All Manuals Search And Download.
SETTING UP THE SPEAKER OPTIONS
If you have connected this player to an Amp/Receiver or Home theater via the 7.1 channel Analog outputs you need
to set the Speaker Options for the best sound.
System Setup
1. With the unit in Stop mode, press the MENU button.
Language Setup
Music
2. Press the ▲▼ buttons to select Setup, then press the
Audio Setup
Setup
No Disc
ENTER or
►
button.
Display Setup
HDMI Setup
Network Setup
Parental Setup
System Setup
3. Press the ▲▼ buttons to select Audio Setup, then press
the ENTER or button.
PCM Down Sampling
Dynamic Compression
:
:
On
On
Language Setup
Music
Setup
►
Audio Setup
Speaker Setup
No Disc
Display Setup
HDMI Setup
Network Setup
Parental Setup
4. Press the ▲▼ buttons to select Speaker Setup, then
press the ENTER or button.
PCM Down Sampling
Dc i
:
On
On
Language Setup
Music
Se
►
Speaker Setup
No Disc
5. Press the ▲▼◄► buttons to select the desired Speaker,
Front
LFE
Center
Surround
Surround Back
:
:
:
:
:
Small
On
Small
Small
Small
then press the ENTER button.
6. When done, use the ▲▼◄► buttons to select Save, then
press the ENTER button.
Save
Cancel
a
Test Tone
Select
²
Return
If you don’t want to save your work, use the ▲▼◄►
buttons to select Cancel, then press the ENTER button.
Press the RETURN or ◄ button to return to the previous menu.
M
Speaker Setup
Subwoofer Speaker
•
•
On : Select to use the subwoofer speaker.
Off : Select to disable the subwoofer
speaker.
(This option can only be selected when the
Front (L+R) speakers are set to Large.)
Front (L, R)
Large, Small
Center (C)
Large, Small, None
Large, Small, None
On, Off
Surround (LS, RS)
Subwoofer (LFE)
Press the RED(A) button
Surround Back
(LSB, RSB)
Large, Small, None
•
A test tone will be sent to L
ꢀ
C
ꢀ
R
ꢀ
RS
ꢀ
RSB LSB LS LFE in order so you
ꢀ
ꢀ
ꢀ
can make sure the speakers are set up
correctly.
To end the test tone, press the RED (A)
button again.
The test tone can only be activated when no
discs are in the unit.
Speaker
•
•
•
•
Large : Delivers full bandwidth sound with bass below 100
Hz.
•
Small : If LFE is on, bass below 100 Hz will be outputted
through a Subwoofer instead of the speakers. If LFE is off
and the Front Speaker is set to Large, sound will be
outputted through the Front Speaker.
The test tone outputs through the 7.1 channel
analog outputs only.
• None : Select to disable the speakers.
English _39
Download from Www.Somanuals.com. All Manuals Search And Download.
display setup
SETTING UP THE VIDEO DISPLAY/OUTPUT OPTIONS
This function allows you to setup the TV screen settings. This function
depends on the disc or TV type. It may not work with some discs or TVs.
Language Setup
Music
Setup
Audio Setup
Display Setup
No Disc
1. With the unit in Stop mode, press the MENU button.
HDMI Setup
2. Press the ▲▼ buttons to select Setup, then press the
Network Setup
Parental Setup
ENTER or
3. Press the ▲▼ buttons to select Display Setup, then
press the ENTER or button.
►
button.
►
Video setup menu will be displayed.
Language Setup
Audio Setup
4. Press the ▲▼ buttons to select the desired display option
Music
Setup
from the options on the following pages.
Display Setup
TV Aspect
:
16:9 Wide
No Disc
HDMI Setup
Movie Frame (24 Fs)
Resolution
:
:
:
:
Off
Network Setup
Parental Setup
1080i
On
Screen Message
Front Display
Bright
5. Press the ▲▼ buttons to select the desired sub-menu
item from a video display option, then press the ENTER
button.
Press the RETURN or ◄ button to return to the previous menu. Press the MENU button to exit the menu.
M
TV Aspect
Depending on the type of television you have, you may want to adjust the screen setting. (aspect ratio)
• 4:3 Letter Box :
Language Setup
Music
Setup
Audio Setup
Select when you want to see the total
16:9 ratio screen BD/HD DVD/DVD
supplies, even though you have a TV with
a 4:3 ratio screen. Black bars will appear
at the top and bottom of the screen.
4:3 Letter Box
Display Setup
TV Aspect
No Disc
4:3 Pan-Scan
HDMI Setup
Movie Frame (24 Fs)
Resolution
:
:
:
16:9 Wide
Network Setup
Parental Setup
1080i
On
Screen Message
Front Display
Bright
• 4:3 Pan-Scan :
Select this for conventional size TV when
you want to see the central portion of the
16:9 screen. (Extreme left and right side
of movie picture will be cut off.)
• 16:9 Wide :
You can view the full 16:9 picture on your widescreen TV.
Depending on the disc type, some aspect ratios may not be available.
M
40_ display setup
Download from Www.Somanuals.com. All Manuals Search And Download.
Movie Frame (24 Fs)
Movies are usually filmed at 24 frames per second. Some Blu-
ray/HD DVD discs have the capability of playing back at this
frame rate. Setting the Movie Frame (24Fs) feature to ON
allows you to adjust the Duo HD player's HDMI output to 24
frames per second for improved picture quality.
Language Setup
Audio Setup
Music
Setup
TV Aspect
:
16:9 Wide
Display Setup
Movie Frame (24 Fs)
On
No Disc
Off
HDMI Setup
Resolution
:
:
Network Setup
Parental Setup
Screen Message
Front Display
On
Bright
You can enjoy the Movie Frame (24Fs) feature solely on a TV
supporting this frame rate.
This menu can only be selected in 1080i or 1080p HDMI
output resolution modes.
Depending on the disc, two types of frame rates may be included: Movie material (24 frame) and Video
material (30 frame). When the setting switches between Movie( 24 frame) and Video (30 frame), the
screen may blink for a few seconds.
Resolution
Sets the output resolution of the Component and HDMI video signal.
Language Setup
Audio Setup
TV Aspect
:
:
16:9 Wide
Off
Music
Setup
Movie Frame (24 Fs)
•
The number in 480i, 480p, 720p, 1080p and 1080i indicates
the number of lines of video. The i and p indicate interlace
and progressive scan, respectively.
Display Setup
Resolution
1080p
No Disc
1080i
HDMI Setup
Screen Message
Front Display
720p
Network Setup
Parental Setup
480p
- 1080p : Outputs 1080 lines of progressive video.
- 1080i : Outputs 1080 lines of interlaced video.
- 720p : Outputs 720 lines of progressive video.
- 480p : Outputs 480 lines progressive video.
- 480i : Outputs 480 lines of interlaced video.
480i
Language Setup
TV Aspect
:
:
16:9 Wide
Off
If the connected TV does not support Movie Frame or the
selected resolution, you will see the following message:
:
1080p
If no pictures are shown after the selection,
please wait for 15 seconds. And then,
No Disc
If you select Yes and the resolution is not supported, the TV's
screen will be blank.
the resolution will be reverted
:
:
On
!
to the previous value automatically.
Bright
Would you like to make a selection?
Yes
No
If the screen is blank, press and hold the $ button on the front of the player for more than 5 seconds
(no disc inserted). All settings are restored to the factory default. Follow the steps on the previous page to
access each mode and select the Display Setup that your TV will support.
M
When the factory default settings are restored, all the user data stored in the persistent storage will be deleted.
When the HDMI video output is Movie Frame(24 fs), simultaneous out is disabled.
English _41
Download from Www.Somanuals.com. All Manuals Search And Download.
display setup
❖ Resolution according to the output mode (Simultaneous Output with HDMI)
•
BD/HD DVD playback
Output
HDMI
Component
VIDEO/S-Video
Setup
1080p, Movie Frame(24Fs) off
1080p@60F
1080p@24F
1080i
1080i
-
480i
-
1080p/1080i, Movie Frame (24Fs) on
1080i, Movie Frame (24Fs) off
1080i
720p
480p
480i
480i
480i
480i
480i
720p
480p
480i
720p
480p
480p
•
DVD playback
Output
HDMI
Component
VIDEO/S-Video
Setup
1080p
1080i
720p
480p
480i
1080p@60F
1080i
480i
480i
480i
480i
480i
480i
480i
480i
480i
480i
720p
480p
480p
In DVD playback, if both HDMI and Component jacks are connected and you select the Component mode, the
Display Setup menu will show the output resolution as 1080p. The resolution is actually 480i.
M
This player has the HDMI Auto Detect Feature. When the player is first connected to a TV via HDMI, the
player's output will be set automatically to HDMI.
If the HDMI Auto Detection feature does not work, you can't select the 1080p resolution or Movie Frame
(24Fs).
The BD/HD DVD disc must have the 24 frame feature in order to use the Movie Frame (24Fs) mode.
If you connect only Component cable to your TV, the Component resolution may differ from the chart above.
Screen Message
•
•
On : Displays messages related to operation mode.
Off : Does not display messages related to operation mode.
Front Display
•
•
•
Automatic : Display is dark during playback and bright when the unit is in Stop mode.
Dim : Select to dim the display window.
Bright : Select to brighten the display window.
42_ display setup
Download from Www.Somanuals.com. All Manuals Search And Download.
HDMI setup
SETTING UP THE HDMI SETUP OPTIONS
1. With the unit in Stop mode, press the MENU button.
Audio Setup
Music
Setup
Display Setup
2. Press the ▲▼ buttons to select Setup, then press the
HDMI Setup
No Disc
ENTER or
3. Press the ▲▼ buttons to select HDMI Setup, then press
the ENTER or button.
►
button.
Network Setup
Parental Setup
►
HDMI setup menu will be displayed.
4. Press the ▲▼ buttons to select the desired display option
(Anynet or Format), then press the ENTER or
►
button.
Anynet+ (HDMI-CEC)
When HDMI is set to on, you can operate the Anynet+ function.
Audio Setup
Music
Setup
Display Setup
•
•
On : Anynet+ functions will work.
Off : Anynet+ function will not work.
HDMI Setup
Anynet+ (HDMI-CEC)
On
No Disc
Off
TV
Network Setup
Parental Setup
HDMI Format
:
:
:
Sharpness
Off
Off
DVD Noise Reduction
What is Anynet+?
Anynet+ is a convenient function that offers linked operations with other Samsung products with the
Anynet+ feature.
You can operate this unit using a Samsung TV remote control or power on your Samsung TV and Home
theater and start disc playback simply by pressing the PLAY button on the TV’s remote.
This function is not available if the HDMI cable does not support CEC.
M
To use Anynet+
1. Connect the Duo HD player to a Samsung TV with an HDMI cable. (See pages 20~21)
2. Set the Anynet+ (HDMI CEC) to “On” on your Duo HD player.
3. Set the Anynet+ function on your TV. (See the TV instruction manual for more information.)
Anynet+ Functions
•
One touch play
You can power on your Samsung TV and Home Theater, and play the disc in this unit simply by
pressing the PLAY button on the TV’s remote.
•
One touch watching
Select “Watching Duo HD player" or "Connected to Duo HD player" (depending on your TV's menu) in
the Anynet+ menu on the TV. The Duo HD player will automatically turn on and the TV will be switched
to HDMI mode.
•
•
Remote control Link
You can operate this player with your Samsung TV remote control.
Available buttons on the Samsung TV remote: These buttons work the same as this player's remote
control.
English _43
Download from Www.Somanuals.com. All Manuals Search And Download.
HDMI setup
- Playback control buttons :
- Menu operation button :
- Numeric buttons :
ENTER
A
B
C
D
- Color buttons :
TV Anynet+ Menu
When pressing the Anynet+ button on your Samsung TV's
remote control, the following On-Screen Display (OSD) will be
shown.
n
Duo HD player
View TV
Select Device
Record
•
Duo HD player Menu
Menu on Device
Device Operation
- When playing a movie : brings up the disc’s menu (same
as DISC MENU button on the Duo HD player’s remote
control)
Receiver
Setup
: Off
>
e
Move
Exit
s
Enter
- In Stop mode : brings up the SETUP menu (same as the
MENU button on the Duo HD player’s remote control.)
•
Duo HD player Operation Menu
- When playing a HD DVD, DVD VIDEO, DVD-RW/-R, BD-ROM :
shows INFO OSD (same as INFO button on the player's remote control)
These menus will vary from Samsung TV to TV.
M
HDMI Format
You can optimize the HDMI output for connection to a TV or
Monitor.
Audio Setup
Music
Setup
Display Setup
Anynet+ (HDMI-CEC)
HDMI Format
:
On
HDMI Setup
TV
No Disc
• TV : Select if connected to a TV via HDMI.
Monitor
Off
Network Setup
Parental Setup
Sharpness
:
:
• Monitor : Select if connected to a Monitor via HDMI.
DVD Noise Reduction
Off
If the player is connected to a TV, the Monitor option is
unavailable.
Sharpness
To adjust the picture smoothness.
(Low, Middle, High)
Audio Setup
Anynet+ (HDMI-CEC)
HDMI Format
:
:
On
TV
Music
Setup
Display Setup
HDMI Setup
Sharpness
Off
No Disc
Low
Network Setup
Parental Setup
DVD Noise Reduction
Middle
High
DVD Noise Reduction
This setting can be used to reduce image noise on DVD discs
on the screen.(Low, Middle, High)
This feature does not work with BD or HD DVD discs.
Audio Setup
HDMI Format
Sharpness
:
:
TV
Music
Setup
Display Setup
Off
HDMI Setup
DVD Noise Reduction
Off
No Disc
Low
Network Setup
Parental Setup
Middle
High
44_ HDMI setup
Download from Www.Somanuals.com. All Manuals Search And Download.
parental setup
SETTING UP THE PARENTAL LOCK
The Parental Lock function works in conjunction with BD/HD DVD/DVDs that have been assigned a rating which
helps you control the types of BD/HD DVD/DVDs that your family watches. There are up to 8 rating levels on a disc.
hAZ
1. With the unit in Stop mode, press the MENU button.
HDMI Setup
Network Setup
Music
Setup
2. Press the ▲▼ buttons to select Setup, then press the
ENTER or button.
Parental Setup
No Disc
No Disc
No Disc
No Disc
►
3. Press the ▲▼ buttons to select Parental Setup, then
press the ENTER or button.
Network Setup
Music
Setup
►
Parental Setup
Parental Setup
When you operate your Duo HD player for the first time,
the “Enter New password” message will be displayed.
Enter New password.
«
Number
² Return
HDMI Setup
4. Enter the 4-digit password using the number buttons on
the remote control.
Network Setup
Music
Setup
Parental Setup
Parental Setup
The “Confirm the password” message will be displayed.
Enter your password again.
Confirm the password.
«
Number
² Return
HDMI Setup
5. Press the ENTER or
►
button to select Use Password.
Network Setup
Music
Setup
Parental Setup
Use Password
:
:
Off
Rating Level
1 (Kids)
New Password
6. Press the ▲▼ buttons to select On or Off, then press the
ENTER button.
Press the RETURN or ◄ button to return to the previous menu. Press the MENU button to exit the menu.
M
If you forgot your password
1. Remove the disc.
2. Press and hold the
button on the front panel for 5 seconds or more.
•
All settings will revert to the factory settings.
When the factory default settings are restored, all the user data stored in the persistent storage will be deleted.
M
English _45
Download from Www.Somanuals.com. All Manuals Search And Download.
parental setup
Setting the Rating Level
1. Press the ▲▼ buttons to select Rating Level, then press
HDMI Setup
Network Setup
Use Password
Rating Level
:
Off
Music
Setup
the ENTER or
►
button.
Parental Setup
8(Adults)
No Disc
7
New Password
6
5
4
3
2
1 (Kids)
HDMI Setup
2. Press the ▲▼ buttons to select the rating level you want,
then press the ENTER button. For example, if you select
up to Level 6, discs that contain Level 7, 8 will not play. A
larger number indicates that the program is intended for
adult use only.
Network Setup
Use Password
Rating Level
:
:
Off
Music
Setup
Parental Setup
8 (Adults)
No Disc
New Password
Level 1 is the most restrictive and Level 8 is the least.
Changing the Password
1. Press the ▲▼ buttons to select New Password, then
HDMI Setup
Use Password
Rating Level
:
:
Off
press the ENTER or
►
button.
Network Setup
8 (Adults)
Music
Setup
Parental Setup
New Password
No Disc
No Disc
No Disc
2. Enter the 4-digit password using the number buttons on
the remote control. The “Enter New password.” message
will be displayed.
HDMI Setup
Use Password
Rating Level
:
:
Off
Network Setup
8 (Adults)
Music
Setup
Parental Setup
Parental Setup
New Password
Enter New password.
«
Number
²
Return
HDMI Setup
Use Password
Rating Level
:
:
Off
3. Enter your password again using the number buttons on
Network Setup
8 (Adults)
Music
Setup
the remote control.
Parental Setup
Parental Setup
New Password
Confirm the password.
«
Number
²
Return
46_ parental setup
Download from Www.Somanuals.com. All Manuals Search And Download.
network setup
You can enjoy contents provided by the movie studio or update your player via the Internet.
Follow the steps below to ensure the best connection to the Internet for your player.
To obtain information on the proper settings, check the network settings on your computer or
contact your Internet provider.
TCP/IP SETTING
1. With the unit in Stop mode/No Disc mode, press the
Display Setup
HDMI Setup
Music
Setup
MENU button.
Network Setup
Parental Setup
TCP/IP
No Disc
2. Press the ▲▼ buttons to select Setup, then press the
Proxy
ENTER or
3. Press the ▲▼ buttons to select Network Setup, then
press the ENTER or button.
4. Press the ▲▼ buttons to select TCP/IP, then press the
ENTER or button.
►
button.
Cookie
:
:
:
On
Network Throughput
NTP Server
MAC Address
Modem(28.8Kbps)
Off
►
►
5. Press the ▲▼ buttons to select DHCP, then press the
Display Setup
Mu
ENTER button.
Mus
TCP/IP
DHCP
:
On
Setu
No Disc
IP Address
:
000
255
000
.
.
.
000
.
000
255
000
.
.
.
000
000
000
Subnet Mask
:
:
:
:
:
255
.
Gateway
000
.
On
DNS
Automatic
000
Modem(28.8Kbps)
Off
Primary DNS
Secondary DNS
000
000
.
.
000
000
.
000
000
.
.
If DHCP is set to On, you can't select IP Address, Subnet
Mask or Gateway.
M
.
000
Save
Cancel
Return
s
Select
²
If DNS is set to Automatic, you can’t select Primary/
Secondary DNS.
6. Press the ▲▼ buttons to select a desired item, then press the ENTER button.
HDMI Setup
•
•
•
If DHCP is set to Off and, DNS to
Manual, enter the following for the IP
Address, Subnet Mask, Gateway and
Primary DNS settings (Secondary
DNS is optional).
Parental Setup
System Information
Music
TCP/IP
DHCP
:
:
:
:
:
:
:
Off
Setu
No Disc
IP Address
Subnet Mask
Gateway
000
255
000
.
.
.
000
.
000
.
000
000
000
255
.
255
.
000
.
000
.
On
DNS
Manual
Setup available
000Modem(28.8Kbps)
000 000
Primary DNS
Secondary DNS
000
000
.
.
.
.
000 000
.
.
000
Cancel
Select
Off
Save
s
²
Return
If DHCP is set to On and, DNS to
Manual, enter the following for the
Primary DNS setting (Secondary DNS
is optional).
Parental Setup
System Information
Music
TCP/IP
DHCP
:
:
:
:
:
:
:
On
Setu
No Disc
IP Address
Subnet Mask
Gateway
000
255
000
.
.
.
000
255
000
.
.
.
000
255
000
.
.
.
000
000
000
Setup not available
Setup available
On
DNS
Manual
000Modem(28.8Kbps)
000 000
Primary DNS
Secondary DNS
000
000
.
.
.
.
000 000
.
.
000
Cancel
Select
Off
Save
s
²
Return
If DHCP is set to On and, DNS to
Automatic, you don’t need further or
additional settings.
HDMI Setup
Parental Setup
System Information
Music
TCP/IP
DHCP
:
:
:
:
:
:
:
On
Setu
No Disc
IP Address
Subnet Mask
Gateway
000
255
000
.
.
.
000
.
000
.
000
000
000
255
000
.
.
255
000
.
.
On
DNS
Automatic
Setup not available
000Modem(28.8Kbps)
Primary DNS
Secondary DNS
000
000
.
.
000 000
.
.
000 000
.
.
000
Cancel
Select
Off
Save
s
²
Return
English _47
Download from Www.Somanuals.com. All Manuals Search And Download.
network setup
When you select an item, use the number and ▲▼◄► buttons.
M
7. When done, use the ▲▼ buttons to select Save, then press the ENTER button.
8. If you don’t want to save your work, use the ▲▼◄► buttons to select Cancel, then press the
ENTER button.
The IP address used in this manual is for illustrative purposes only. You must refer to the your network settings
for the actual IP address.
M
To obtain settings for IP address, Subnet mask, Gateway and Primary DNS, check the network settings in your
computer.
PROXY SETTING
If you are required to configure the proxy setting, enter the
settings specified by the ISP.
Display Setup
HDMI Setup
TCP/IP
Music
Proxy
:
To setup, follow steps 1 to 3 in "TCP/IP Setting" on page 47.
S
Proxy
Off
No Disc
Server
Port
:
On
4. Press the ▲▼ buttons to select Proxy, then press the
:
:
:
8080
Modem(28.8Kbps)
Off
User
ENTER or
►
button.
Password
Cancel
•
•
•
•
Server
Port
User
Save
Select
²
Return
Password
For more information, contact your ISP (Internet Service Provider).
M
COOKIE SETTING
A cookie is a small text file that is stored while you are
navigating through web sites.
Display Setup
HDMI Setup
TCP/IP
Proxy
Music
Network Setup
Parental Setup
Cookie
On
Setup
No Disc
The cookie can contain information such as user ID, user
settings, etc.
Off
Network Throughput
NTP Server
:
()
Off
MAC Address
To setup, follow steps 1 to 3 in "TCP/IP Setting" on page 47.
4. Press the ▲▼ buttons to select Cookie, then press the
ENTER or
►
button.
On : Cookies are used between the player and a Web
page server.
Off : Cookies are not used. Convenience may be lost for some pages.
•
•
48_ network setup
Download from Www.Somanuals.com. All Manuals Search And Download.
NETWORK THROUGHPUT
Select the Internet modem type that is connected to your player.
To setup, follow steps 1 to 3 in "TCP/IP Setting" on page 47.
Display Setup
HDMI Setup
Proxy
Music
Setup
Cookie
:
On
4. Press the ▲▼ buttons to select Network Throughput,
Network Setup
Parental Setup
Network Throughput
Modem(28.8Kbps)
No Disc
then press the ENTER or
►
button.
Modem(33.6Kbps)
NTP Server
Modem(56Kbps)
•
Network Throughput Available
- Modem (28.8k,33.6k,56Kbps)
- ISDN (64Kbps)
MAC Address
ISDN(64Kbps)
Dual ISDN(128Kbps)
- Dual ISDN (128Kbps)
- DSL/CABLE (256kbps)
- DSL/CABLE (384kbps)
- DSL/CABLE (768kbps)
- T1 (1.5Mbps)
- LAN (10Mbps or More)
NTP SERVER SETTING
To setup, follow steps 1 to 3 in "TCP/IP Setting" on page 47.
4. Press the ▲▼ buttons to select NTP Server , then press
the ENTER or button.
On : the player automatically connects to the Internet
Display Setup
HDMI Setup
Cookie
:
:
On
Music
Setup
Network Throughput
Modem(28.8Kbps)
Network Setup
Parental Setup
NTP Server
On
No Disc
►
Off
MAC Address
•
•
server in order to adjust the time setting.
Off : the player does not connect to the Internet server
for adjusting the time setting.
MAC ADDRESS
Displays the MAC address of the player. It cannot be changed.
Display Setup
HDMI Setup
Network Throughput
NTP Server
:
Modem(28.8Kbps)
Music
Setup
To setup, follow steps 1 to 3 in "TCP/IP Setting" on page 47.
Network Setup
MAC Address
MAC Address
No Disc
4. Press the ▲▼ buttons to select Mac Address, then press
the ENTER or
►
button.
00
:
10
:
18
:
05
:
00
:
b2
The MAC address appears.
OK
Samsung shall not be responsible for any malfunction or failed operation due to Internet connection failure or a
communication error. Neither Samsung shall be responsible for failure of the user’s Internet connection.
If you want to use wireless Internet, you need a wireless LAN adapter. In similarity, you need a wireless LAN adapter for
your Duo HD player.
M
HD DVD features using your network are not manufactured nor provided by Samsung. Therefore, Samsung shall not be
responsible for proper operation or future update for those features. If you have problem with those matters or any other
question, contact the disc manufacturer.
For some discs, a faster internet connection may be required.
Even if you have successfully installed the player, the internet connection may not work properly according to the network
speed or service provided.
The Internet features of Duo HD player is compatible with IEEE (Institute of Electrical and Electronic Engineers) 802.3.
You may not access some Internet service depending on the limitations of your Internet service provider.
Any fee caused by your Internet connection is solely your responsiblity.
For proper use of Duo HD player’s internet features, you need a 10 base-T or 100 base-Tx LAN port. You may not use the
player’s internet features on some Internet service that your ISP does not support or provide.
A DSL modem is needed to use DSL service. You may have agreed with your ISP (Internet Service Provider) on the number
of concurrent internet connection devices. Under the agreement, your PC and Duo HD player may not use the network
simultaneously.
You may not be allowed to use a router under your ISP’s policy.
When using DSL connection systems, the network service provided by the DuoHD Player may not be available.
(ex. PPPoE)
English _49
Download from Www.Somanuals.com. All Manuals Search And Download.
persistent storage management
SYSTEM DEVICE MANAGEMENT
You can manage such information as stored provider and content directory.
To setup, follow steps 1 to 2 in "TCP/IP Setting" on page 47.
Time Zone
Clock Set
Music
Setup
3. Press the ▲▼ buttons to select System Setup, then
press the ENTER or button.
4. Press the ▲▼ buttons to select Persistent Storage
Management, then press the ENTER or button.
5. Press the ▲▼ buttons to move sub-directory, then press
the ENTER or button.
System Setup
Persistent Storage Management
System Update
No Disc
►
Language Setup
Audio Setup
Twin Format Disc
:
HD DVD
Display Setup
HDMI Setup
►
Network Setup
Parental Setup
►
Persistent Storage Management
flash
Select Device
- To delete a directory -
Use the ▲▼ button to select a file to delete and press the
BLUE(D) button. (You cannot delete devices.)
Menu Name
Device Information
Description of Device Information
•
Category : Indicates if this device is a built-in or a
hot-plug device.
- Required : Built-in device
Slot Status : Indicates the current slot type of the
device.
Highlight
Persistent Storage Management
Internal Flash Memory
Sony Pictures
•
Porvider ID Name 1
Common
- Non Slot : Device that does not support hot-plug.
Device Name : Name of the device
Total Size : Total size of the device
Available Size : Available size of the device
Average Read Rate : Data read rate from the device
(based on the device spec)
Unknown Provider Area
Unknown Directory
• Total Size
130(MB)
• Available Size
130(MB)
• Average Read Rate
100(Mbps)
•
•
•
•
a
Device
d Delete
Provider List
Help Area
Scroll Bar
In most cases, the Provider directory contains related files to each movie maker and the Contents directory stores
related files to each title.
M
(These directories contain bookmark information files created in playback of a movie or downloaded files through the
network)
All of the files in the directories are not visible to users.
If you delete the directory, all the files in that directory will be deleted accordingly.
Press the RED (A) button in the Provider directory to move up to the parent directory, ‘Device’.
Press the GREEN (B) button in the Contents directory to move up to the parent directory, ‘Provider’.
To the right of the directory/content list, normally there appears information on the current device (name, space
used, data transfer rate).
The movie maker can display an image instead of the directory name intentionally or for its own reason.
50_ persistent storage management
Download from Www.Somanuals.com. All Manuals Search And Download.
system upgrade
Samsung may offer upgrades to your Duo HD player's firmware in the future. To upgrade this firmware you must :
1. Go to samsung.com and refer to 'SUPPORT' page to download the firmware and burn an update CD.
or
2. Connect this player's LAN terminal to the LAN terminal on your modem (see page 30) and follow the steps
below.
FIRMWARE UPGRADE
1. With the unit in No Disc mode(no disc in the unit), press the
Music
MENU button.
System Setup
Setup
No Disc
Language Setup
Audio Setup
2. Press the ▲▼ buttons to select Setup, then press the ENTER
or button.
3. Press the ▲▼ buttons to select System Setup, then press the
ENTER or button.
►
Display Setup
HDMI Setup
Network Setup
Parental Setup
►
Clock Set
Persistent Storage Management
Music
Setup
System Setup
System Update
No Disc
4. Press the ▲▼ buttons to select System Update, then press the
ENTER or button.
Language Setup
Audio Setup
Twin Format Disc
:
HD DVD
►
Display Setup
HDMI Setup
Network Setup
Parental Setup
Clock Set
Persistent Storage Management
Music
Setup
System Setup
System Update
5. You will see a window that allows you to check the cable or
No Disc
System Update
1
2
3
4
5
HD DVD
network connection status.
Now, Checking.
Please wait...
Network Setup
Parental Setup
Clock Set
Persistent Storage Management
Music
Setup
If the upgrade is possible : You will see information on the
current and new versions of firmware in a message box.
System Setup
System Update
No Disc
System Update
1
2
3
4
5
HD DVD
The new update data was found.
Current Version XXXXX
:
New Version
:
XXXXX
Start
Cancel
Network Setup
Parental Setup
Clock Set
Persistent Storage Management
Music
Setup
If the upgrade is not possible : You will see the following
description in the message box.
System Setup
System Update
No Disc
System Update
This system cannot connect
1
2
3
4
5
HD DVD
to internet for update.
•
•
•
If the cable is not connected or the network connection has
failed: “This system cannot connect to internet for update.
Please, check the network setup”
If no later version is released (the latest version has been
already installed) :
"The latest version of the firmware is already installed. There is no need to update."
If there is a disc in the player :
Please, check the network setup
OK
Network Setup
Parental Setup
"Please maintain "No Disc" state for network update."
This indicates that you must remove all discs from the unit to perform the update.
English _51
Download from Www.Somanuals.com. All Manuals Search And Download.
system upgrade
Clock Set
6. To perform the system upgrade, press the ◄► buttons to
Persistent Storage Management
Music
Setup
select Start and then press the ENTER button.
System Setup
System Update
System Update
1
No Disc
2
3
4
5
:
HD DVD
The new update data was found.
Current Version XXXXX
:
New Version
:
XXXXX
Start
Cancel
Network Setup
Parental Setup
Clock Set
7. The system update gets started.
Persistent Storage Management
Music
Setup
System Setup
System Update
System Update
1
No Disc
2
3
4
5
:
HD DVD
Downloading update data...
Please, do not turn off the power.
60%
Cancel
Network Setup
Parental Setup
Clock Set
Persistent Storage Management
8. If you select Cancel during the download process, you are
prompted to confirm your selection in a message box.
If you want to cancel the download, select Yes and press the
ENTER button.ꢀ
Music
Setup
System Setup
System Update
System Update
No Disc
Disc
No Disc
1
2
3
4
5
:
HD DVD
Do you want to cancel the update operation?
Yes
No
Network Setup
Parental Setup
Clock Set
Clock Set
9. Verification will proceed.
Persistent Storage Management
Music
Persistent Storage Management
Music
Setup
When done, the firmware
update process will
begin automatically.
System Setup
System Update
System Update
System Setup
System Update
Setup
No Disc
1
2
3
4
5
System Update
1
2
3
4
5
:
HD DVD
Firmware Update.
:
HD DVD
Verifying update data
Please wait.
Now, Processing...
Please, do not turn off the power.
Network Setup
Parental Setup
Network Setup
Parental Setup
Clock Set
Persistent Storage Management
Music
Setup
System Setup
System Update
System Update
1
2
3
4
5
10. When the installation is done, you will see an
:
HD DVD
Update completed.
“Update Completed” message.
The player will automatically turn off in 3 seconds.
Network Setup
Parental Setup
All settings will revert to the factory settings. the next time you
start the system, you will see the menu language selection
window.
If you want to cancel the upgrade in the process of downloading the upgrade data, press the ENTER button.
You will see a confirmation message.
M
Selecting Yes will end the upgrade process, and selecting No will proceed with the verification step.
When the system upgrade is done, check the firmware details in the System Upgrade menu.
Do not turn off the player during the System Upgrade Otherwise, the player may not work properly.
52_ system upgrade
Download from Www.Somanuals.com. All Manuals Search And Download.
SYSTEM INFORMATION
When the firmware upgrade is done, check the firmware details by following the steps below.
1. With the unit in Stop mode, press the MENU button.
Music
2. Press the ▲▼ buttons to select Setup, then press the
System Setup
Setup
ENTER or
3. Press the ▲▼ buttons to select System Setup, then
press the ENTER or button.
►
button.
No Disc
No Disc
No Disc
Language Setup
Audio Setup
►
Display Setup
HDMI Setup
Network Setup
Parental Setup
4. Press the ▲▼ buttons to select System Information,
then press the ENTER or button.
►
Music
Setup
You can see detailed information about the current
firmware.
System Setup
System Information
Language Setup
Audio Setup
Time Zone
Clock Set
Display Setup
HDMI Setup
Persistent Storage Management
System Update
Network Setup
Parental Setup
Twin Format Disc
:
HD DVD
5. Press the ENTER button to select OK.
System Setup menu will be displayed.
Music
Setup
System Setup
System Information
System Information
S/W : XXXXXX_XXXX
Region : A/1 (BD/DVD)
agement
OK
Network Setup
Parental Setup
Twin Format Disc
:
HD DVD
English _53
Download from Www.Somanuals.com. All Manuals Search And Download.
watching a movie
USING THE DISPLAY FUNCTION
hAZCV
1. During playback, press the INFO button on the remote
BD
Info
control.
Title
: 001/006
: 001/016
Chapter
2. Press the ▲▼ buttons to select the desired item.
Playing Time : 00:04:17
Audio
Subtitle
Angle
: ENG Multi CH
: Off
: 01/01
3. Press the ◄► buttons to make the desired setup and then
§
Change
Select
press the ENTER button.
•
You may use the number buttons of the remote control
to directly access a title, chapter or to start the playback
from a desired time.
4. To make the screen disappear, press the INFO button again.
If you are playing contents from the Info menu, in some cases, playback may malfunction depending on the
title.
M
Title : To access the desired title when there is more than one in the disc. For example, if there is more than
one movie on a BD/HD DVD/DVD, each movie will be identified as a Title.
Chapter: Most BD/HD DVD/DVD discs are recorded in chapters so that you can quickly find a specific passage.
Audio : Refers to the film's soundtrack language. A BD disc can contain up to 32 audio languages and a
HD DVD/DVD up to 8.
Playing Time : Allows playback of the film from a desired time. You must enter the starting time
as a reference. The time search function does not operate on some discs.
Subtitle : Refers to the subtitle languages available in the disc. You will be able to choose the subtitle
languages or, if you prefer, turn them off from the screen. A BD disc can contain up to 255 subtitle languages,
and a HD DVD/DVD up to 32.
Angle : When a BD/HD DVD/DVD contains multiple angles of a particular scene, you can use the ANGLE
function.
A
Using the Color Key(A, B, C, D) Button
Use these buttons on the screen while the HD DVD disc is being
played. The operation of each button can differ, depending on the
disc content.
Use these buttons if you want to use functions supported by the
disc content.
54_ watching a movie
Download from Www.Somanuals.com. All Manuals Search And Download.
USING THE DISC MENU & POPUP/TITLE MENU
hAZ
Using the Disc Menu
1. During playback, press the DISC MENU button on the
PLAY MOVIE
LANGUAGES
SCENE SELECTIONS
PREVIEWS
remote control.
2. Press the ▲▼◄► buttons to make the desired setup,
then press the
►
or ENTER button.
•
The Disc menu setup items may vary from disc to disc.
▼
3
4
5
6
7
8
9
10 11
12 13
14 15
Depending on the disc, the Disc Menu may not be available.
M
You can use various menu options provided by your BD/HD DVD in different ways, according to the disc type.
(ex: direction key)
AZ
Using the Title Menu
1. During playback, press the TITLE MENU button on the remote control.
2. Press the ▲▼◄► buttons to make the desired setup, then press the ENTER button.
• The Title menu setup options may vary from disc to disc.
Depending on the disc, the Title Menu may not be available.
M
Title Menu will only be displayed if there are at least two titles in the disc.
h
Using the Popup Menu
1. During playback, press the POPUP MENU button on the
MAIN MENU
AUDIO SET UP
SUBTITLES
SCENE SELECTIONS
remote control.
2. Press the ▲▼◄► buttons or ENTER button to select the
desired menu.
•
The Popup menu setup options may vary from disc to
disc.
▼
3
4
5
6
7
8
9
10 11
12 13
14 15
Depending on the disc, the Popup Menu may not be available.
M
English _55
Download from Www.Somanuals.com. All Manuals Search And Download.
watching a movie
REPEAT PLAY
Repeat the current chapter or title.
hZCV
Repeat playback
1. During playback, press the REPEAT button on the remote
Repeat
Off
control. Repeat screen appears.
2. Press the ▲▼ buttons to select Chapter or Title.
•
BD/HD DVD/DVD repeats play by chapter or title.
3. To return to normal play, press the REPEAT button again, then press the ▲▼ buttons to select Off.
Depending on the disc, the Repeat function may not be available.
M
The Repeat function may not operate properly on some HD DVDs, depending on the disc type.
hZCV
Using the A-B Repeat function
1. Press the REPEAT A-B button on the remote control.
2. Press the REPEAT A-B button at the point where you want repeat play to start (A).
3. Press the REPEAT A-B button at the point where you want repeat play to stop (B).
4. To return to normal play, press the CANCEL button.
Point B cannot be set until 5 seconds of playback has elapsed from point A.
M
ZB
RESUME PLAY
You can use this function to resume playing the disc from the last stopped point.
If you press the Stop button during playback and press the RESUME PLAY button, the player will
resume playing from the last stopped point.
If you press the Stop button during playback and press it again, the Resume Play function will be
cancelled.
You can change the settings in the Setup menu while the player is storing the location information on the
memory. However, your change will not be applied until the Resume Play function is cancelled.
M
This function may not be enabled, depending on the disc content or the scene.
56_ watching a movie
Download from Www.Somanuals.com. All Manuals Search And Download.
hAZ
SELECTING THE AUDIO LANGUAGE
You can select a desired audio language quickly and easily with the AUDIO button.
Using the AUDIO button
1. Press the AUDIO button during playback. The Audio
Audio
ENG Dolby Digital Multi CH
changes when the button is pressed repeatedly.
•
The audio languages are represented by abbreviations.
2. To remove the AUDIO icon, press the CANCEL or RETURN button.
Using the INFO button
1. During playback, press the INFO button on the remote control.
2. Press the ▲▼ buttons to select Audio language.
3. Press the ◄► buttons on the remote control to select the desired audio.
This function depends on what audio languages are encoded on the disc and may not be available.
M
A BD disc can contain up to 32 audio languages and a HD DVD/DVD up to 8.
Depending on the disc type, you can use the Audio button to change the audio sound track as well as the
audio language.
Some Blu-ray/HD DVD discs may allow you to select either the multi-channel LPCM or Dolby digital audio
sound track in English.
English _57
Download from Www.Somanuals.com. All Manuals Search And Download.
watching a movie
SELECTING THE SUBTITLE LANGUAGE
You can select a desired subtitle quickly and easily with the SUBTITLE button.
hAZ
Using the SUBTITLE button
1. Press the SUBTITLE button. The subtitle changes when
the button is pressed repeatedly. The subtitle languages
are represented by abbreviations.
Subtitle
ENG
2. To remove the SUBTITLE icon, press the CANCEL or RETURN button.
Using the INFO button
1. During playback, press the INFO button on the remote control.
2. Press the ▲▼ buttons to select Subtitle.
3. Press the ◄► buttons on the remote control to select the desired subtitle language.
Depending on BD/HD DVD/DVDs, you may have to change the desired subtitle in the Disc Menu. Press the
DISC MENU button.
M
This function depends on what subtitles are encoded on the disc and may not be available on all BD/HD DVD/
DVDs.
A BD disc can contain up to 255 subtitle languages and a HD DVD/DVD up to 32.
58_ watching a movie
Download from Www.Somanuals.com. All Manuals Search And Download.
CHANGING THE CAMERA ANGLE
When a BD/HD DVD/DVD contains multiple angles of a particular scene, you can use the ANGLE
function.
hAZ
Using the ANGLE function
1. During playback, press the INFO button on the remote control.
BD
Info
2. Press the
buttons to select Angle.
▲▼
Title
: 001/006
: 003/016
Chapter
Playing Time : 00:11:14
Audio
Subtitle
Angle
: ENG Multi CH
: ENG
: 01/01
§
Change
¨
Move
3. Press the ◄► buttons or you can use the number buttons on the remote control to select the
desired angle.
If the disc has only one angle, this feature won’t work. Currently, very few discs have this feature.
Depending on the disc, these functions may not work.
M
A
USING THE CURSOR FUNCTION
Certain HD DVD discs support a cursor function that allows you to move the cursor in 8 different directions.
1. Press the Cursor button if you are playing a disc that supports the cursor function.
2. Move the cursor using the 8 direction buttons.
3. The operation of the cursor key can be taken advantage of for various functions, depending on the
disc.
For more information on the cursor function, refer to the disc’s user manual.
English _59
Download from Www.Somanuals.com. All Manuals Search And Download.
listening to music
B
PLAYING AN AUDIO CD(CD-DA)
1. Insert an Audio CD(CD-DA) into the disc tray.
For an audio CD, the first track will be played
automatically.
TRACK 001
01/12
CD
►
00:01:29 / 00:04:06
2. To move to the Music List, press the STOP or RETURN
button.
The Music List screen is displayed
a
Play Mode
Video
3. Press the ▲▼ buttons to select the track you want to play,
Music
TRACK 001
00:03:20
CD
and then press the ENTER button.
TRACK 002
TRACK 003
TRACK 004
TRACK 005
TRACK 006
TRACK 007
TRACK 008
00:03:32
00:04:36
00:04:17
00:04:11
00:04:07
00:04:46
00:04:21
Setup
b
Playlist
AUDIO CD(CD-DA) SCREEN ELEMENTS
<Audio CD(CD-DA)>
Displays the media type.
Current track (song)
TRACK 001
01/12
Audio CD(CD-DA) : Displays the number of the
track currently being played.
CD
►
00:01:29
/
00:04:06
Play Status Bar.
Displays the current play index, total track number.
Current /Total Play Time.
a
Play Mode
Displays available COLOR buttons.
(see next page for Color button usage).
60_ listening to music
Download from Www.Somanuals.com. All Manuals Search And Download.
BUTTONS ON THE REMOTE CONTROL USED FOR
AUDIO CD (CD-DA) DISC PLAYBACK
1. SKIP ( ) button: During playback, plays the next track. Moves
to the next page in the Music List or the Playlist.
2. PLAY/PAUSE ( ) button: Plays the currently selected track. If
pressed during playback, the current track is paused.
3. ▲▼ buttons : Selects a track(song) in the Music List or Playlist.
4. COLOR buttons: RED(A), GREEN(B), YELLOW(C)
•
•
RED(A) button : Selects the Play Mode(Repeat) during playback.
GREEN(B) button : Go to Playlist from Music List/Go to Music
list from Playlist.
•
YELLOW(C) button : Playlist play.
5. ◄► buttons
►
◄
: Plays the applicable track, according to the current position.
: Moves to the menu.
6. ENTER button : Plays the selected track (song).
7. STOP ( ) button: Stops a track(song).
8. Press the SEARCH (
) buttons :
Fast Play (only Audio CD(CD-DA)).
9. SKIP ( ) button: Returns to the beginning of the current track
when pressed during playback. If pressed again, your Duo HD
player moves to and plays the previous track.
If you press this button within three seconds after playback
starts, the previous track will be played.
If you press this button after three seconds, the current track will
be replayed from the beginning. Moves by the page in the Music
List or the Playlist.
REPEAT AUDIO CD(CD-DA)
During playback, press the REPEAT or RED(A) button repeatedly to select the repeat mode you want.
Normal
ꢀ
ꢀ
ꢀ
•
•
•
Normal : Tracks on a disc are played in the order in which they were recorded on the disc.
Repeat Track
Random
The random option plays a disc’s track in random order.
Repeat All : All tracks are repeated.
•
- To return to normal playback -
Press the REPEAT or RED(A) button repeatedly to return to normal playback.
English _61
Download from Www.Somanuals.com. All Manuals Search And Download.
listening to music
Playlist
You can create a playlist with up to 99 tracks.
Video
Music
Setup
TRACK 006
00:03:20
To setup, follow steps 1 to 2 in page 60.
TRACK 007
00:03:32
CD
CD
CD
1. Press the GREEN(B) button.
TRACK 008
TRACK 009
TRACK 010
TRACK 011
TRACK 012
TRACK 013
TRACK 014
00:04:36
00:04:17
00:04:11
00:04:07
00:04:46
00:04:21
00:03:43
b
Playlist
Original
Playlist
Video
Music
Setup
TRACK 001
2. Press the ▲▼ buttons to select a track, then press the
ENTER button to add it to the Playlist. Repeat this
procedure to add additional tracks.
TRACK 002
TRACK 003
TRACK 004
TRACK 005
TRACK 006
TRACK 007
TRACK 008
b
Music List
Music List
Music List
c
Playlist Play
s
s
s
Add
Original
Playlist
Video
Music
Setup
TRACK 005
01.TRACK 002
02.TRACK 003
03.TRACK 004
04.TRACK 006
TRACK 006
TRACK 007
TRACK 008
TRACK 009
TRACK 010
TRACK 011
TRACK 012
TRACK 013
3. If there is an undesired track in the playlist, press the
►▲▼ button to select that track, and then press the
ENTER button.
•
The selected track will be deleted.
b
c
Playlist Play
Add
Original
Playlist
Video
Music
Setup
TRACK 005
TRACK 006
01.TRACK 002
CD
4. Press the YELLOW(C) button to play the selected
tracks.
TRACK 007
TRACK 008
TRACK 009
TRACK 010
TRACK 011
TRACK 012
TRACK 013
02.TRACK 003
03.TRACK 004
04.TRACK 006
When the track is finished, the next track will
automatically play.
b
c
Playlist Play
Delete
TRACK 002
01/04
CD
►
00:00:05 / 00:05:02
5. To edit the Playlist, press the STOP or RETURN button.
6. To go to the Music List, press the Green(B) or RETURN
button.
62_ listening to music
Download from Www.Somanuals.com. All Manuals Search And Download.
troubleshooting
Before requesting service, please check the following.
PROBLEM
SOLUTION
No operations can be performed with
the remote control.
• Check the batteries in the remote control. They may need replacing.
• Operate the remote control at a distance of no more than 20 feet.
• Remove batteries and hold down one or more buttons for several minutes
to drain the microprocessor inside the remote control to reset it. Reinstall
batteries and try to operate the remote control again.
Disc does not play.
• Ensure that the disc is installed with the label side facing up.
• Check the region number of the BD/HD DVD/ DVD.
7.1 channel sound is not being
reproduced.
• 7.1 channel sound is reproduced only when the following conditions are
met. :
1. The Duo HD player is connected with the proper Amplifier
2. The disc is recorded with 7.1 channel sound.
• Check whether the disc being played has the “7.1 ch” mark on the
outside.
• Check if your audio system is connected and working properly.
• In a SETUP Menu, is the Audio Output set to Bitstream?
Disc Menu doesn’t appear.
• Check if the disc has a Menu.
The icon appears on screen.
• The features or action cannot be completed at this time because:
1. The BD/HD DVD/ DVD’s software restricts it.
2. The BD/HD DVD/ DVD’s software doesn’t support the feature (e.g.,
angles)
3. The feature is not available at the moment.
4. You’ve requested a title or chapter number or search time that is out of
range.
Play mode differs from the Setup Menu • Some of the functions selected in the Setup Menu may not work properly
selection.
if the disc is not encoded with the corresponding function.
The screen ratio cannot be changed.
No audio.
• The Screen Ratio is fixed on your BD/HD DVD/ DVD's.
• Make sure you have selected the correct Digital Output in the Audio
Options Menu.
The screen is blocked
• Press the $ button (in front panel) for more than 5 seconds with no disc
inside. All settings will revert to the factory settings.
English _63
Download from Www.Somanuals.com. All Manuals Search And Download.
troubleshooting
PROBLEM
SOLUTION
If the HDMI output is set to a resolution
your TV cannot support (for example,
1080p), you may not see a picture on
your TV.
• Press the $ button (in front panel) for more than 5 seconds with no disc
inside. All settings will revert to the factory settings.
Forgot password
• Press the $ button (in front panel) for more than 5 seconds with no disc
inside. All settings including the password will revert to the factory
settings. Don't use this unless absolutely necessary.
If you experience other problems.
• Go to the contents and find the section of the instruction book that
contains the explanations regarding the current problem, and follow the
procedure once again.
• If the problem still cannot be solved, please contact your nearest Samsung
authorized service center.
The picture is noisy or distorted
No HDMI output.
• Make sure that the disc is not dirty or scratched.
• Clean the disc.
• Check the connection between the TV and the HDMI jack of the Duo HD
player.
• Check if your TV supports 480p/720p/1080i/1080p HDMI input
resolution.
Abnormal HDMI output screen.
• If random noise appears on the screen, it means that TV does not support
HDCP (High-bandwidth Digital Content Protection).
When the factory default settings are restored, all the user data stored in the persistent storage will be deleted.
M
64_ troubleshooting
Download from Www.Somanuals.com. All Manuals Search And Download.
appendix
SPECIFICATIONS
Power Requirements
Power Consumption
AC 120V, 60Hz
42 W
Weight
General
9.3 Ibs
Dimensions
16.9 (W) x 12.8 (D) x 3.1 (H) inches
+41°F to +95°F
Operating Temperature Range
Operating Humidity Range
BD (Blu-ray Disc)
HD DVD
10 % to 75 %
Reading Speed : 4.917m/sec
Reading Speed : 6.61m/sec
Reading Speed : 3.49 ~ 4.06 m/sec.
Approx. Play Time (Single Sided, Single Layer Disc) : 135 min.
Reading Speed : 4.8 ~ 5.6 m/sec.
Maximum Play Time : 74 min.
Reading Speed : 4.8 ~ 5.6 m/sec.
Maximum Play Time : 20 min.
1 channel : 1.0 Vp-p (75 Ω load)
Blu-ray/HD DVD/DVD Disc : 480i
Y : 1.0 Vp-p (75 Ω load)
DVD (Digital Versatile Disc)
CD : 5 inches (COMPACT DISC)
CD : 3 1/2 inches (COMPACT DISC)
Composite Video
Disc
Pr : 0.70 Vp-p (75 Ω load)
Pb : 0.70 Vp-p (75 Ω load)
Component Video
Video Output
Blu-ray/HD DVD Disc : 1080i, 720p, 480p, 480i
Luminance Signal : 1.0 Vp-p (75 Ω load)
Chrominance Signal : 0.3 Vp-p (75 Ω load)
Blu-ray/HD DVD / DVD Disc : 480i
1080p, 1080i, 720p, 480p
DVD : 480p, 480i
S-Video
HDMI
Video/Audio
Audio Output
PCM multichannel audio, Bitstream audio, PCM audio
L(1/L), R(2/R)
2 Channel
7.1 Channel
F/L, F/R, R/L, R/R, C/T, S/W, SBR, SBL
Optical/Coaxial
Digital Audio Output
48 kHz Sampling : 4 Hz to 22 kHz
96 kHz Sampling : 4 Hz to 44 kHz
110 dB
*Frequency Response
*S/N Ratio
*Dynamic Range
*Total Harmonic Distortion
100 dB
0.003%
*: Nominal specification
- Samsung Electronics Co., Ltd reserves the right to change the specifications without notice.
- Weight and dimensions are approximate.
English _65
Download from Www.Somanuals.com. All Manuals Search And Download.
COPY PROTECTION
Compliance and Compatibility Notice
•
Because AACS (Advanced Access Content
System) is approved as content protection
system for BD and HD DVD format, similar to use
of CSS (Content Scramble System) for DVD
format, certain restrictions are imposed on
playback, analog signal output, etc., of AACS
protected contents. The operation of this product
and restrictions on this product may vary
depending on your time of purchase as those
restrictions may be adopted and/or changed by
AACS after the production of this product.
Furthermore, BD-ROM Mark and BD+ are
additionally used as content protection system
for BD format, which imposes certain restrictions
including playback restrictions for BD-ROM Mark
and/or BD+ protected contents. To obtain
additional information on AACS, BD-ROM Mark,
BD+, or this product, please contact SAMSUNG
customer care center.
Many BD/HD DVD/DVD discs are encoded with
copy protection. Because of this, you should only
connect your Duo HD player directly to your TV,
not to a VCR. Connecting to a VCR results in a
distorted picture from copy-protected BD/HD
DVD/DVD discs.
This product incorporates copyright protection
technology that is protected by methods claims
of certain U.S. patents and other intellectual
property rights owned by Macrovision
Corporation and other rights owners. Use of this
copyright protection technology must be
authorized by Macrovision Corporation and is
intended for home and other limited viewing uses
only, unless otherwise authorized by Macrovision
Corporation. Reverse engineering or disassembly
is prohibited.
Under the U.S. Copyright laws and Copyright
laws of other countries, unauthorized recording,
use, display, distribution, or revision of television
programs, videotapes, BDs, HD DVD’s, DVDs,
and other materials may subject you to civil and/
or criminal liability.
For Duo HD Players progressive scan output :
CONSUMERS SHOULD NOTE THAT NOT ALL
HIGH DEFINITION TELEVISION SETS ARE
FULLY COMPATIBLE WITH THIS PRODUCT
AND MAY CAUSE ARTIFACTS TO BE
DISPLAYED IN THE PICTURE. IN CASE OF
PROGRESSIVE SCAN PICTURE PROBLEMS, IT
IS RECOMMENDED THAT THE USER SWITCH
THE CONNECTION TO THE ‘STANDARD
DEFINITION’ OUTPUT. IF THERE ARE
QUESTIONS REGARDING OUR TV SET
COMPATIBILITY WITH THIS PRODUCT,
PLEASE CONTACT OUR CUSTOMER SERVICE
CENTER.
NOT ALL discs are compatible
•
Subject to the restrictions described below and those noted
throughout this Manual, including the Disc Type and
Characteristics section of this Manual, disc types that can be
played are: pre-recorded commercial BD-ROM,
HD DVD, DVD-Video, and Audio CD discs; DVD-RW / DVD-R
discs; and CD-R discs.
•
•
Discs other than the above cannot and/or is not intended to
be played by this player. And some of the above discs may
not play due to one or more reasons provided below.
Samsung cannot assure that this player will play every disc
bearing the BD, HD DVD, DVD-Video, DVD-RW / DVD-R
and CD-R logos, and this player may not respond to all
operating commands or operate all features of every disc.
These and other disc compatibility and player operation
issues with new and existing format discs are possible
because:
- BD/ HD DVD are new and evolving formats and this player
may not operate all features of BD/ HD DVD discs
because some features may be optional, additional
features may have been added to the BD/ HD DVD format
after the production of this player, and certain available
features may be subject to delayed availability;
- not all new and existing disc format versions are supported
by this player;
- new and existing disc formats may be revised, changed,
updated, improved and/or supplemented;
- some discs are produced in a manner that allows specific
or limited operation and feature during playback;
- some features may be optional, additional features may
have been added after the production of this player or
certain available features may be subject to delayed
availability;
- some discs bearing the BD-ROM, HD DVD, DVD-Video,
DVD-RW/ DVD-R and CD-R logos may still be non-
standardized discs;
- some discs may not be played depending on their physical
state or recording conditions;
•
•
•
•
- problems and error can occur during the creation of BD,
HD DVD, DVD software and/or the manufacture of discs;
- this player operates differently than a standard DVD player
or other AV equipment; and/or
- for reasons noted throughout this Manual and for other
reason(s) discovered and posted by SAMSUNG customer
care center.
•
•
If you encounter disc compatibility or player operation
problems, please contact SAMSUNG customer care center.
You may also contact SAMSUNG customer care center for
possible updates on this player.
For additional information on playback restrictions and disc
compatibility, refer to the Precautions, Before Reading the
User’s Manual, Disc Types and Characteristics, and Before
Playing sections of this Manual.
66_ appendix
Download from Www.Somanuals.com. All Manuals Search And Download.
LIMITED WARRANTY TO ORIGINAL PURCHASER
Samsung Electronics Canada Inc.(SECA), warrants that this product is free from defective material
and workmanship.
SECA further warrants that if this product falls to operate properly within the specified warranty
period and the failure is due to improper workmanship or defective materials, SECA will repair or
replace the product at its option.
All warranty repairs must be performed by a SECA Authorized Service Center. (The name and
address of the location nearest you can be obtained by calling toll free: 1- 800- SAMSUNG)
LABOR
PARTS
One year (Carry- in)
One year
On carry-in models, transportation to and from the service center is the customer’s responsibility.
The original dated sales receipt must be retained by the customer and is the only acceptable proof
of purchase. It must be presented to the authorized service center at the time service is requested.
EXCLUSIONS (WHAT IS NOT COVERED)
This warranty does not cover damage due to accident, fire, flood and/ or other acts of God; misuse,
incorrect line voltage, improper installation, improper or unauthorized repairs, commercial use or
damage that occurs in shipping. Exterior and interior finish, lamps, glass are not covered under
this warranty. Customer adjustments which are explained in the instruction manual are not covered
under the terms of this warranty. This warranty will automatically be voided for any unit found with
a missing or altered serial number. This warranty is valid only on products purchased and used in
Canada.
HEADQUARTERS
SAMSUNG ELECTRONICS CANADA INC.,
CUSTOMER SERVICE
55 STANDISH COURT MISSISSAUGA, ONTARIO L5R 4B2 CANADA
FABRIQUE EN CORÉE
1-800-SAMSUNG (1-800-7267864)
www.samsung.com/ca
Download from Www.Somanuals.com. All Manuals Search And Download.
Contact SAMSUNG WORLD WIDE
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care
center.
Region
Country
Web Site
Customer Care Center ꢀ
1-800-SAMSUNG(726-7864)
01-800-SAMSUNG(726-7864)
1-800-SAMSUNG(726-7864)
0800-333-3733
0800-124-421 , 4004-0000
800-SAMSUNG(726-7864)
0-800-507-7267
1-800-10-7267
800-6225
1-800-299-0013
1-800-234-7267
CANADA
www.samsung.com/ca
www.samsung.com/mx
www.samsung.com/us
www.samsung.com/ar
www.samsung.com/br
www.samsung.com/cl
www.samsung.com/latin
www.samsung.com/latin
www.samsung.com/latin
www.samsung.com/latin
www.samsung.com/latin
www.samsung.com/latin
www.samsung.com/latin
www.samsung.com/latin
North America
MEXICO
U.S.A
ARGENTINE
BRAZIL
CHILE
COSTA RICA
ECUADOR
EL SALVADOR
GUATEMALA
JAMAICA
PANAMA
PUERTO RICO
REP. DOMINICA
Latin America
800-7267
1-800-682-3180
1-800-751-2676
TRINIDAD & TOBAGO
1-800-SAMSUNG(726-7864)
www.samsung.com/latin
VENEZUELA
COLOMBIA
BELGIUM
0-800-100-5303
01-8000112112
0032 (0)2 201 24 18
www.samsung.com/latin
www.samsung.com.co
www.samsung.com/be
844 000 844
Distributor pro ýeskou republiku :
Samsung Zrt., þeska organizaþní složka
Vyskoþilova 4, 14000 Praha 4
CZECH REPUBLIC
www.samsung.com/cz
DENMARK
FINLAND
70 70 19 70
030-6227 515
3260 SAMSUNG(726-7864) or
08 25 08 65 65 ( 0,15/Min)
www.samsung.com/dk
www.samsung.com/fi
FRANCE
www.samsung.com/fr
GERMANY
HUNGARY
ITALIA
LUXEMBURG
NETHERLANDS
NORWAY
01805 - 121213 ( 0,14/Min)
06-80-SAMSUNG(726-7864)
800-SAMSUNG(726-7864)
0035 (0)2 261 03 710
0900 20 200 88 ( 0,10/Min)
815-56 480
0 801 801 881 , 022-607-93-33
80 8 200 128
0800-SAMSUNG(726-7864)
902 10 11 30
0771-400 200
0870-SAMSUNG(726-7864)
0818 717 100
0800-SAMSUNG(726-7864)
0800-SAMSUNG(726-7864)
8-800-555-55-55
www.samsung.de
www.samsung.com/hu
www.samsung.com/it
www.samsung.com/be
www.samsung.com/nl
www.samsung.com/no
www.samsung.com/pl
www.samsung.com/pt
www.samsung.com/sk
www.samsung.com/es
www.samsung.com/se
www.samsung.com/uk
www.samsung.com/ie
www.samsung.com/at
www.samsung.com/ch
www.samsung.ru
Europe
POLAND
PORTUGAL
SLOVAKIA
SPAIN
SWEDEN
U.K
Republic of Ireland
AUSTRIA
Switzerland
RUSSIA
KAZAHSTAN
UZBEKISTAN
KYRGYZSTAN
UKRAINE
LITHUANIA
LATVIA
8-10-800-500-55-500
8-800-120-0-400
00-800-500-55-500
8-800-502-0000
8-800-77777
800-7267
www.samsung.kz
www.samsung.uz
CIS
www.samsung.ua
www.samsung.lt
www.samsung.com/lv
www.samsung.ee
ESTONIA
800-7267
AUSTRALIA
New zealand
CHINA
HONG KONG
INDIA
INDONESIA
JAPAN
MALAYSIA
PHILIPPINES
SINGAPORE
THAILAND
TAIWAN
1300 362 603
www.samsung.com/au
www.samsung.com/nz
www.samsung.com.cn
www.samsung.com/hk
www.samsung.com/in
www.samsung.com/id
www.samsung.com/jp
www.samsung.com/my
www.samsung.com/ph
www.samsung.com/sg
www.samsung.com/th
www.samsung.com/tw
www.samsung.com/vn
www.samsung.com.tr
www.samsung.com/za
0800SAMSUNG(726-7864)
800-810-5858 , 010-6475 1880
3698-4698
3030 8282 , 1800 110011
0800-112-8888
0120-327-527
1800-88-9999
1800-10-SAMSUNG(726-7864)
1800-SAMSUNG(726-7864)
1800-29-3232 , 02-689-3232
0800-329-999
1 800 588 889
444 77 11
Asia Pacific
VIETNAM
Turkey
SOUTH AFRICA
Middle East &
Africa
0860-SAMSUNG(726-7864 )
800-SAMSUNG (726-7864),
8000-4726
U.A.E
www.samsung.com/mea
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
caractéristiques principales de votre
nouveau lecteur de disque Duo HD
Caractéristiques du lecteur
Peut accueillir une grande variété de disques vidéo
Peut accueillir les disques BD, HD DVD, DVD vidéo, DVD-RW/-R (en mode V finalisés uniquement).
HDMI (High Definition Multimedia Interface) (Interface Multimédia haute définition)
Le format HDMI réduit les parasites des images en fournissant un chemin d’accès pur au signaux vidéo / audio
numériques depuis le lecteur jusqu’à votre téléviseur.
Simplay HD
Simplay HD guarranti que ce lecteur a été mis
à l'essai en conformité avec des critères visant
à maximiser la reproduction des contenus HD.
Caractéristiques des disques Blu-ray
Les disques Blu-ray permettent de stocker 25 Go (simple couche) ou 50 Go (bicouche) sur un disque à simple face
– environ 5 à 10 fois plus de capacité qu’un DVD. Les disques Blu-ray peuvent aussi accueillir les vidéos
HD les meilleurs de l’industrie – Une grande capacité signifie aucun compromis sur la qualité vidéo. De plus, un
disque Blu-ray possède la taille et le look familier d’un DVD.
Caractéristiques HD DVD
Le HD DVD est la plus récente innovation à haute définition du format DVD populaire.
Un disque HD DVD (bicouche) peut stocker jusqu'à 30 Go de données et un disque HD DVD unicouche jusqu'à 15
Go. Vous pouvez stocker jusqu'à 8 heures de vidéo à haute définition sur un disque HD DVD unicouche en
balayage de 1125 lignes et jusqu'à 48 heures à définition normale en balayage de 525 lignes.
* Les caractéristiques suivantes des disques BD/HD DVD dépendent du disque et peuvent varier.
L’apparence et les éléments de navigation varient aussi d’un type de disque à l’autre.
Tous les disques ne possèdent pas les caractéristiques décrites ci-bas.
Points culminants concernant les vidéos
Le format BD-ROM/HD DVD-ROM pour la distribution de films peut accueillir trois codecs vidéo hautement
améliorés, y compris AVC, VC-1 et MPEG-2.
Ces formats de résolution vidéo HD sont aussi disponibles :
•
•
1920 x 1080 HD
1280 x 720 HD
Lecture en haute définition
Pour visionner le contenu des disques BD/HD DVD, vous devez utiliser un téléviseur HD (haute définition). Certains
disques BD/HD DVD peuvent nécessiter l’utilisation de la sortie HDMI OUT du lecteur pour en permettre le
visionnement du contenu en haute définition. La possibilité de visionnement du contenu à haute définition des
disques BD/HD DVD peut être limitée par la résolution de votre téléviseur.
2_ Français
Download from Www.Somanuals.com. All Manuals Search And Download.
Plans graphiques
PLAY MOVIE
LANGUAGES
SCENE SELECTIONS
PREVIEWS
Deux couches individuelles à pleine résolution HD
(1920x1080) sont disponibles par dessus la couche
vidéo HD. Une de cescouches est affectée aux
graphiques reliés au vidéo (comme les sous-titres) et
l’autre aux éléments interactifs comme les touches ou
les menus. Plusieurs effets de volet, de fondu et de
défilement peuvent être disponibles sur les deux
couches.
Plans
graphiques
▼
3
4
5
6
7
8
9
10 11
12 13
14 15
Vidéo HD
raphiques de menu
Peut accueillir les graphiques et les animations en résolution de couleur maximale, surpassant ainsi les capacités de
la vidéo DVD.
Contrairement au DVD, il est possible d’accéder aux menus en cours de lecture.
Sons de menu
Lorsque vous sélectionnez ou mettez en évidence une option d’un menu sur un disque, vous pouvez entendre certains
sons comme le clic des touches ou une voix hors champ expliquant votre choix mis en évidence sur le menu.
Pages multiples / menus contextuels
PLAY MOVIE
LANGUAGES
SCENE SELECTIONS
PREVIEWS
Avec un DVD-Vidéo, la lecture est interrompue à chaque fois que vous
accédez à un nouveau menu. Un menu peut comprendre plusieurs pages
en raison de la capacité du disque BD/HD DVD de précharger les
données du disque sans interrompre la lecture.
Vous pouvez naviguer dans les pages du menu ou en sélectionner
différents chemins d’accès pendant que la lecture audio et vidéo se
poursuit en arrière plan.
▼
3
4
5
6
7
8
9
10 11
12 13
14 15
Interactivité
Le HD DVD vous permet de profiter de types de contenu supplémentaires renfermant des informations telles que
les options de menu d'animation ou de film, lecture simultanée de deux films à l'aide de l'option PIP (image sur
image) et de télécharger différents contenus par le biais de l'Internet.
Diaporamas naviguables par l’utilisateur
Les disques BD/HD DVD vous permettent de naviguer parmi vos photos pendant que le signal audio continue.
Sous-titrage
Selon le contenu du disque BD/HD DVD, vous pourriez possiblement sélectionner différents styles, tailles et couleurs
de police pour le sous-titrage. Les Sous-titrages peuvent être animés, fondus ou vous pouvez les faire défiler.
Système Multi-format
Un disque HD DVD double-format comporte la couche HD DVD et la couche DVD sur une face unique.
Un disque HD DVD double-format comporte la couche HD DVD et la couche DVD sur chaque face.
Branchement à l'Internet (port LAN)
Certains disques HD DVD sont conçus pour accéder à des sites Web qui vous permettent de visionner d'autres
contenus sur votre lecteur.
À L'INTÉRIEUR
Vérifiez la présence des accessoires énumérés ci-bas.
Câbles Vidéo composite
Piles de la télécommande
et Audio G/D (MF39-00274A)
(format AAA) (4301-001035)
Guide d'utilisation (AK68-01477B)
Guide rapide (AK68-01480B)
Télécommande (AK59-00075A)
Français _3
Download from Www.Somanuals.com. All Manuals Search And Download.
directives de sécurité
AVERTISSEMENT
POUR RÉDUIRE LES RISQUES D’ÉLECTROCUTION, NE RETIREZ PAS LE COUVERCLE (NI LE PANNEAU ARRIÈRE).
AUCUNE PIÈCE SITUÉE À L'INTÉRIEUR NE PEUT ÊTRE RÉPARÉE PAR L'UTILISATEUR. POUR TOUT DÉPANNAGE,
ADRESSEZ-VOUS À UN TECHNICIEN QUALIFIÉ.
ATTENTION
RISQUE D’ÉLECTROCUTION
NE PAS OUVRIR
L’éclair et la flèche inclus dans le
triangle représentent un avertissement à ÉLECTRIQUES, NE PAS RETIRER LE COUVERCLE (OU LE
l’égard de tensions dangereuses se
trouvant à l’intérieur du produit
ATTENTION: AFIN DE RÉDUIRE LES RISQUES DE CHOCS
Un triangle contenant un point
d’exclamation signifie un avertissement
vous demandant de consulter les
instructions importantes qui
PANNEAU ARRIÈRE). L'APPAREIL NE CONTIENT PAS DE PIÈCES
EXIGEANT UN ENTRETIEN DE LA PART DE L’UTILISATEUR.
CONFIER L’ENTRETIEN À UN PERSONNEL QUALIFIÉ.
accompagnent le produit.
AVERTISSEMENT
•
Afin de réduire les risques d’incendie ou de chocs électriques, ne pas exposer l'appareil à la pluie ou à l’humidité.
•
Pour éviter des blessures, cet appareil doit être assujetti au plancher ou au mur, conformément aux consignes
d’installation.
Remarque destinée à l’installateur de la câblodistribution :
Ce rappel a pour objectif d’attirer l’attention de l’installateur de la câblodistribution sur l’article 820-40 du Code
national électrique (alinéa 54 du Code électrique canadien, chapitre I) qui donne des instructions pour une mise à la
terre correcte et, notamment, spécifie que le câble de mise à la terre doit être branché à l’installation de mise à la
terre du bâtiment la plus proche possible du point d’entrée du câble.
AVIS DE LA FCC (pour les É-U) :
Cet appareil a été mis à l’essai, il est conforme aux exigences en matière de limites pour un appareil numérique de
classe B, selon le paragraphe 15 de la Réglementation de la FCC.
Ces limites sont conçues pour prévenir raisonnablement les brouillages préjudiciables pour les installations
domestiques. Cet appareil génère, utilise et peut émettre de l’énergie radioélectrique.
S’il n'est pas installé et utilisé selon les instructions, il peut provoquer des brouillages préjudiciables pour la réception
radio ou télévision. Ces brouillages peuvent être déterminés en allumant et en éteignant l’appareil.
L’utilisateur est encouragé à essayer de corriger le brouillage à l’aide de l’une ou l’autre des mesures suivantes.
•
•
•
•
Réorientez l'antenne de réception ou changez son emplacement.
Augmentez la distance entre l'appareil et le récepteur.
Branchez l'appareil sur une prise murale différente de celle à laquelle le récepteur est relié.
Demandez de l'aide au revendeur ou à un technicien radio/TV expérimenté.
Cet appareil numérique de Classe B satisfait à toutes les exigences du Règlement canadien ICES-003 sur les
appareils produisant du brouillage.
CLASS 1
LASER PRODUCT
KLASSE 1 LASER PRODUKT
LUOKAN 1 LASER LAITE
KLASS 1
LASER APPARAT
PRODUCTO LÁSER CLASE 1
PRODUIT AVEC DISPOSITIF AU LASER DE CLASSE 1
L’utilisation de toute commande ou réglage, ou l’application de toute procédure ou rendement autres que ceux
spécifiés aux présentes pourraient provoquer des radioexpositions dangereuses.
4_ directives de sécurité
Download from Www.Somanuals.com. All Manuals Search And Download.
ATTENTION
CE PRODUIT UTILISE UN RAYON LASER. L’UTILISATION DES COMMANDES OU LE RÉGLAGE OU LA
PERFORMANCE DE PROCÉDURES AUTRES QUE CELLES PRÉCISÉES CI-DESSUS PEUT PROVOQUER UNE
EXPOSITION DANGEREUSE AUX RADIATIONS. NE TENTEZ PAS D’OUVRIR LE COUVERCLE OU DE RÉPARER
VOUS-MÊME L’APPAREIL. POUR TOUT DÉPANNAGE, ADRESSEZ-VOUS À UN TECHNICIEN QUALIFIÉ.
Remarques :
•
Cet appareil ne doit être utilisé qu'avec une alimentation de 120 V CA, 60Hz. Il ne peut être utilisé ailleurs.
•
Le lecteur Duo HD est conçu et fabriqué pour répondre aux informations reliées à la gestion des régions. Si le numéro de
région d'un disque BD/DVD ne correspond pas au numéro du lecteur Duo HD, ce dernier ne peut pas lire le disque.
•
L’appareil accompagnant ce manuel de l’utilisateur est sous licence de certains droits de propriété intellectuelle
appartenant à des tiers.
In particular, this product is licensed under the following US patents:
5,060,220 5,457,669 5,561,649 5,705,762 5,987,417 6,043,912 6,222,983 6,272,096 6,377,524 6,377,531
6,385,587 6,389,570 6,408,408 6,466,532 6,473,736 6,477,501 6,480,829 6,556,520 6,556,521 6,556,522
6,578,163 6,594,208 6,631,110 6,658,588 6,674,697 6,674,957 6,687,455 6,697,307 6,707,985 6,721,243
6,721,493 6,728,474 6,741,535 6,744,713 6,744,972 6,765,853 6,765,853 6,771,890 6,771,891 6,775,465
6,778,755 6,788,629 6,788,630 6,795,637 6,810,201 6,862,256 6,868,054 6,894,963 6,937,552
Ce produit est protégé par un ou plusieurs des brevets américains ci-après :
US4,930,158 US4,930,160
Cette licence se limite à l’utilisation personnelle et non commerciale de la part des usagers en ce qui concerne les
teneurs licenciés.
Aucun droit n’est accordé pour l’utilisation commerciale. Cette licence ne couvre pas tout produit autre que ledit
appareil et la licence ne couvre pas tout produit ou processus autre non licencié en conformité avec les normes
ISO/IEC 11172-3 ou ISO/IEC 13818-3 utilisé ou vendu en association avec ledit produit.
La licence ne couvre que l’utilisation dudit produit pour l’encodage ou le décodage de fichiers audio en conformité
avec les normes ISO/IEC 11172-3 ou ISO/IEC 13818-3. Ladite licence n’accorde aucun droit pour les
caractéristiques ou fonctions du produit qui ne sont pas conformes aux normes ISO/IEC 11172-3 ou ISO/IEC
13818-3.
CONSIGNES DE PRÉCAUTIONS
Consignes de sécurité importantes
Lisez attentivement ces directives de fonctionnement avant d’utiliser l’appareil. Observez toutes les consignes de
sécurité énumérées plus bas. Conservez ces directives d’opération en vue d’une consultation ultérieure.
1) Lisez ces directives.
2) Conservez ces directives.
3) Tenez compte de tous les avertissements.
4) Suivez toutes les directives.
5) N’utilisez jamais cet appareil à proximité de l’eau.
6) Nettoyez uniquement avec un chiffon sec.
7) N’obstruez aucun orifice de ventilation, installez l’appareil conformément aux directives du fabricant.
8) Ne l’installez pas à proximité d’une source de chaleur telle que des radiateurs, des registres de chaleur ou
d’autres appareils (y compris des amplificateurs) produisant de la chaleur.
9) Ne démontez pas le dispositif de sécurité de la prise de terre ou de la prise polarisée. Les fiches polarisées
disposent de deux broches, dont l’une est plus large que l’autre. Par contre, les prises de mise à la terre
comportent deux broches plus une troisième broche de mise à la terre. La broche large ou la troisième broche
garantissent votre sécurité. Si la fiche fournie ne s'adapte pas sur votre prise murale,
renseignez-vous auprès d’un électricien pour le remplacement de la prise obsolète.
10) Protégez le cordon électrique contre le piétinement ou les pincements en particulier
près des fiches, des prises murales et à leur point de sortie de l’appareil.
11) Utilisez uniquement des accessoires spécifiés par le fabricant.
Français _5
Download from Www.Somanuals.com. All Manuals Search And Download.
directives de sécurité
12) Utilisez le support vendu avec l’appareil ou utilisez uniquement un support,table à roulettes,meuble,tré pied ou
table qui est conforme aux recommandations du fabricant.Si l’appareil est install é sur une table à
roulettes,déplacez-la avec la plus grande précaution afin d’éviter toute blessure et tout dommage.
13) Débranchez l’appareil lors d ’un orage électrique ou en cas de non utilisation prolongée.
14) Confiez l'ensemble des réparations au personnel qualifié. Une réparation est nécessaire lorsque le dispositif est
endommagé de quelque façon que ce soit, incluant les cordons ou les prises endommagés, lorsqu’un liquide a
été renversé ou que des objets sont tombés dans l’appareil, que l’appareil a été exposé à l’humidité ou à la
pluie, qu’il ne fonctionne pas normalement ou qu’il est tombé.
Précautions de manutention
•
Avant de raccorder d'autres composantes au lecteur Duo HD, veuillez vous assurer qu'elles soient toutes hors
tension.
•
Ne déplacez pas le lecteur Duo HD alors qu'un disque est en cours de lecture car le disque risque de se briser ou
d'être rayé et les parties internes du lecteur Duo HD de s'endommager.
•
•
•
•
Ne posez jamais de vase à fleurs contenant de l'eau ou de petits objets métalliques sur le lecteur Duo HD.
Évitez de placer vos mains à l’intérieur du tiroir disque.
Ne déposez rien d’autre qu’un disque dans le tiroir.
Des phénomènes extérieurs comme la foudre et l’électricité statique peuvent affecter le fonctionnement normal du
lecteur Duo HD. Si cela se produit, éteignez puis rallumez le lecteur Duo HD à l’aide de la touche POWER
(ALIMENTATION) ou débranchez puis rebranchez le cordon d’alimentation CA sur la prise murale. Le lecteur Duo
HD fonctionnera normalement.
•
•
Assurez-vous de retirer le disque et d'éteindre le lecteur Duo HD après usage.
Débranchez le cordon d'alimentation CA de la prise murale lorsque vous n'avez pas l'intention d'utiliser le lecteur
Duo HD pendant des périodes prolongées.
•
•
•
Nettoyez le disque en l'essuyant en ligne droite du dedans vers le dehors.
Évitez d'exposer le lecteur aux gouttes et aux éclaboussures de liquides.
Lorsqu'il demeure branché sur une prise murale CA, le lecteur continue de consommer de l'énergie même s'il est
éteint (mode Veille).
Entretien du boîtier
Pour des raisons de sécurité, veillez à débrancher le cordon CA de la prise murale.
•
•
N’utilisez pas de solvant, d'alcool ou de benzène pour le nettoyage.
Essuyez le boîtier avec un chiffon doux.
Limitations de lecture
•
Ce lecteur peut ne pas répondre à toutes les commandepuisque certains disques Blu-ray, HD DVD, DVD ou CD
ne permettent la lecture que de certaines caractéristiques ou un fonctionnement limité. Veuillez remarquer que
cela ne constitue pas une dysfonction du lecteur.
•
Samsung ne peut assurer que ce lecteur puisse lire tous les disques affichant les logos Blu-ray, HD DVD, DVD et
CD puisque les formats de disque évoluent et que certains problèmes ou erreurs se produisent lors de la création
du logiciel des BD, HD DVD, DVD, CD et / ou de leur fabrication.
Ce lecteur peut aussi fonctionner d’une façon autre qu’un lecteur DVD standard ou qu’un autre appareil AV.
Veuillez contacter le centre d’aide à la clientèle SAMSUNG pour toute question supplémentaire ou si vous
rencontrez certaines difficultés à effectuer la lecture de disques Blu-ray, HD DVD, DVD ou CD avec ce lecteur. De
plus, reportez-vous aux directives contenues dans le reste de ce manuel concernant les limitations de lecture ou
pour des renseignements supplémentaires.
6_ directives de sécurité
Download from Www.Somanuals.com. All Manuals Search And Download.
table des matières
3
À L'intérieur
CARACTÉRISTIQUES PRINCIPALES DE VOTRE
NOUVEAU LECTEUR DE DISQUE DUO HD
2
4
5
Avertissement
Consignes de précautions
DIRECTIVES DE SÉCURITÉ
4
9
Avant de lire ce manuel de l’utilisateur
PREMIERS 9PAS
10 Type et caractéristiques des disques
13 Stockage des disques et gestion
14 Panneau avant
14 Afficheur du panneau avant
15 Panneau arrière
DESCRIPTION
14
16 Tournée de la télécommande
18 Réglage de la télécommande
18 Concernant le Bloc-piles
TÉLÉCOMMANDE
16
20
19 Codes téléviseur contrôlables
20 Raccordement à un téléviseur avec le câble HDMI
21 Fonction de détection automatique HDMI
22 Raccordement à un téléviseur avec la prise DVI
23 Raccordement à un téléviseur (Component)
24 Raccordement à un téléviseur (S-Video)
25 Raccordement à un téléviseur (Video)
RACCORDEMENTS
26 Raccordement à un système audio
(amplificateur à 2 canaux)
27 Raccordement à un système audio
(amplificateur à 7,1 canaux)
28 Raccordement à un système audio (Dolby numérique),
amplificateur DTS (système cinéma numérique)
29 Raccordement à un système audio
(amplificateur compatible HDMI)
30 Branchement sur l'internet
31 Avant d’effectuer une lecture
32 Navigation dans les menus à l’écran
32 Lecture d’un disque
33 Comment lire un disque HD DVD double-format
33 Utilisation des fonctions Recherche et saut
34 Pour retourner au début du chapitre précédent,
FONCTIONS DE BASE DE VOTRE
LECTEUR 3DUO1HD
appuyez de nouveau.
35 Réglage de l’horloge
36 Configuration des paramètres de langue
Français _7
CONFIGURATION DU SYSTÈME
35
RÉGLAGE DE LANGUE
36
Download from Www.Somanuals.com. All Manuals Search And Download.
table des matières
37 Configuration des options audio
39 Configuration des paramètres de langue
OPTIONS AUDIO
37
40 Configuration des options d’affichage et de
OPTIONS D'AFF4ICHA0GE
sortie vidéo
43 Réglage des options HDMI
CONFIGURATION HDMI
43
45 Configuration du contrôle parental
CONTRÔLE PA4REN5TAL
47 Réglage TCP/IP
CONFIGURATION DU RÉSEAU
48 Réglage du serveur mandataire
48 Réglage des témoins internet
49 Débit du réseau
49 Configuration du serveur NTP
49 Adresse MacIntosh
47
50 Gestion des dispositifs système
GESTION DU STOCKAGE CONTINUEL
50
51 Mise à niveau du micrologiciel
53 Information système
MISE À NIVEAU DU SYSTÈME
51
54 Utilisation de la fonction AFFICHEUR
55 Utilisation de Menus du Disque & contextuel / Titre Menu
56 Lecture en boucle (répétition)
VISIONNER UN FILM
54
57 Sélection de langue audio
58 Sélectionner la langue de sous-titre
59 Changement de l’angle de caméra
59 Comment utiliser la fonction Cursor (Curseur)
60 Lecture d’un CD audio (CD-DA)
60 Éléments de l’écran CD Audio(CD-DA)
61 Les touches de la télécommande utilisées pour
la lecture de disques CD audio (CD-DA)
61 Lecture en boucle CD Audio(CD-DA)
ÉCOUTER DE LA M6USIQ0UE
63 Dépannage
DÉPANNAGE
63
65 Caractéristiques techniques
APPENDICE
65
8_ table des matières
Download from Www.Somanuals.com. All Manuals Search And Download.
premiers pas
AVANT DE LIRE CE MANUEL DE L’UTILISATEUR
Veuillez vérifier les termes suivants avant de lire le manuel de l’utilisateur.
Les icônes utilisés dans le manuel
Icône
h
A
Z
C
Terme
Définition
BD-ROM
Implique une fonction disponible sur le BD-ROM.
HD DVD-ROM Cela implique une fonction disponible sur un DVD-ROM HD.
Implique une fonction disponible sur les disques DVD-vidéo ou DVD-R/
Vidéo DVD
DVD-RW enregistrés et finalisés en mode vidéo.
Implique une fonction disponible sur le DVD-RW (finalisé uniquement).
DVD-RW
(mode V finalisé uniquement)
Implique une fonction disponible sur le DVD-R (finalisé uniquement).
DVD-R
V
B
M
(Mode V finalisé uniquement)
Implique une fonction disponible sur un CD-R de données
(Format CD-DA).
Audio CD
Implique des trucs ou des directives sur la page permettant à chaque
fonction d’agir.
Remarque
À propos de l’utilisation de ce manuel
1) Veuillez vous familiariser avec les consignes de sécurité avant d’utiliser ce produit. (Voir les pages 4
~6)
2) Si un problème se produit, vérifiez le tableau de dépannage. (Voir les pages 63~64)
Droits d’auteur
©2007 Samsung Electronics Co.,Ltd.
Tous droits réservés ; ce manuel ne peut être reproduit ou copié en tout ou en partie sans la permission
préalable et écrite de Samsung Electronics Co., Ltd.
Français _9
Download from Www.Somanuals.com. All Manuals Search And Download.
premiers pas
TYPE ET CARACTÉRISTIQUES DES DISQUES
Types de disques compatibles pour la lecture
Logo des
Types de disque
Contenu enregistré
Forme de disque
Durée maximale de lecture
disques
Simple face (25 Go, 5 po)
Double face (50 Go, 5 po)
Simple face (15 Go, 5 po)
Double face (30 Go, 5 po)
Simple face (5 po)
La durée de lecture dépend
des titres
BD-ROM
AUDIO + VIDÉO
HD DVD-ROM
DVD-VIDEO
AUDIO-CD
AUDIO + VIDÉO
AUDIO + VIDÉO
–
240
480
80
Double face (5 po)
Simple face (3 1/2 po)
Double face (3 1/2 po)
Simple face (5 po)
160
74
AUDIO
Simple face (3 1/2 po)
20
DVD-RW (Mode V
finalisé uniquement)
480
AUDIO + VIDÉO
AUDIO + VIDÉO
5 po (4,7 Go)
5 po (4,7 Go)
(EX : Longue durée)
DVD-R (Mode V
finalisé uniquement)
480
(EX : Longue durée)
•
•
Ce lecteur est compatible avec le système couleur NTSC uniquement.
Les disques PAL ne peuvent pas être lus.
Logos des disques compatibles
Blu-ray Disc
HD DVD
Dolby Digital Plus
Dolby TrueHD
Ambiophonie numérique DTS
Audio numérique
NTSC système de diffusion au États-
Unis d’Amérique, Canada, Corée, Japo
Stéréo
Java
Lorsque vous effectuez la lecture d'un disque Dolby TrueHD le son n'est reproduit que par les haut-parleurs
avant de gauche et de droite.
M
10_ premiers pas
Download from Www.Somanuals.com. All Manuals Search And Download.
Disques incompatibles
•
Les disques Blu-ray avec code régional autre que
« Region A ».
BD-R, BD-RE
Disques DVD-Vidéo avec code régional autre que le "1"
ou "ALL"
HD DVD-R
•
•
•
•
•
DVD-RAM
Disques DVD-R 3,9 Go pour système auteur.
Disques DVD-RW (VR mode)
Disques DVD-ROM/PD/MV, etc.
Disques CVD/CD-ROM/CD-RW/CDV/CD-G/
CD-I/LD
•
•
•
•
[Remarque]
Certains disques pour utilisation commerciale et disques HD DVD/DVD achetés hors de votre région
peuvent être incompatibles avec ce produit. Si vous tentez de lire ces disques, le message “No disc
(Aucun disque)” ou “Please check the regional code of the disc (Veuillez vérifier le code régional du
disque)” s’affiche.
•
•
Si un disque DVD-R/-RW n’a pas été enregistré correctement en format DVD vidéo, il sera incompatible.
L'appareil ne peut pas lire le contenu des disques CD-R et DVD-RW/-R tel que les fichiers divx, avi, mpg,
mov, wma, mp3 et digital photo view (JPEG).
Code régional
Le lecteur Duo HD et les disques sont codés par région.
Ces codes régionaux doivent correspondre pour permettre la lecture du disque.
Si les codes ne correspondent pas, le disque sera incompatible.
Le numéro de région du lecteur Duo HD est indiqué sur le panneau arrière de l’appareil.
Types de disque
Blu-ray
DVD-Video
Code régional
Code régional BD
Région
L’Amérique du Nord, l’Amérique Centrale, l’Amérique du Sud, la Corée, le Japon, Taiwan, Hongkong
et le Sud-Est asiatique.
A
B
C
L’Europe, le Groenland, les territoires français, le Moyen-Orient, l’Afrique, l’Australie et la Nouvelle Zélande
l’Inde, la Chine, la Russie, l’Asie central e et l’Asie méridionale.
Code régional
DVD - VIDÉO
Région
1
2
3
Les États-Unis, ses territoires et le Canada
L'Europe, le Japon, le Moyen Orient, l'Égypte, l'Afrique du Sud et le Grœnland
Taiwan, la Corée, les Philippines, l'Indonésie et Hong Kong
Le Mexique, l'Amérique du Sud, l'Amérique Centrale, l'Australie, la Nouvelle Zélande, les îles du
Pacifique et les Caraïbes
4
5
6
La Russie, l'Europe de l'EST, l'Inde, la plus grande partie de l'Afrique, la Corée du Nord et la Mongolie
La Chine
Présentement, les HD DVD ne comportent pas de code régional. Cependant, un code régional leur sera
attribué bientôt.
Compatibilité des disques Blu-ray
Le disque Blu-ray est un nouveau formattoujours en évolution. En conséquence, des problèmes de
compatibilité du disque sont possibles.En conséquence, les problèmes de compatibilité avec de nouveaux
formats ou formats existants de disque sont possibles. Tous les disques ne sont pas compatibles et tous ne
peuvent être lus. Pour plus de renseignements, reportez-vous aussi au chapitre Avis de conformité et de
compatibilité dans ce manuel. Si vous éprouvez des problèmes de compatibilité, veuillez contacter un centre
d’aide à la clientèle SAMSUNG. Ce lecteur Duo HD de Samsung (BD-UP5000) ne peut accueillir que la norme
BD-ROM Profile 1 version 1.0. Vous devrez mettre à niveau le micrologiciel de votre lecteur pour écouter des
disques de version ultérieure. Veuillez consulter le site http://www.samsung.com/global/register ou contacter
un centre d’aide à la clientèle de SAMSUNG en composant.
Français _11
Download from Www.Somanuals.com. All Manuals Search And Download.
premiers pas
Compatibilité du disque HD DVD
Le format HD DVD est récent et des problèmes de compatibilité sont possibles avec les disques au
nouveau format ou au format existant.
Les disques ne sont pas tous compatibles. Si vous éprouvez des problèmes de compatibilité, veuillez
contacter un centre d’aide à la clientèle SAMSUNG.
La lecture peut s’avérer impossible avec certains types de disque, ou lorsque des opérations spécifiques, telles que
les modification d’angle et les réglages du format d’image sont effectués. Les renseignements concernant les
disques sont exprimés en détail sur l’emballage. Vérifier si nécessaire.
M
Évitez que les disques ne se salissent ou s’égratignent. Les empreintes digitales, la saleté, la poussière, les égratignures
ou les dépôts de fumée de tabac sur la surface d’enregistrement peuvent rendre la lecture du disque impossible.
Les disques contenant un programme PAL enregistré ne peuvent être lus par ce produit.
si vous écoutez un titre de format BDJava, son chargement peut être plus long que celui d’un titre normal ou
certaines fonctions peuvent ralentir.
Les disques aux caractéristiques de réseautage incorporées peuvent afficher un message de chargement/
téléchargement en plus du message de chargement au départ.
Types de disque
❖ BD-ROM
Disque Blu-ray à mémoire morte. Un disque BD-ROM contient des données préenregistrées. Même
si un BD-ROM peut contenir toute forme de données, la plupart contiennent des films en format à
haute définition pour la lecture par le lecteur Duo HD. Cet appareil peur effectuer la lecture de
disques BD-ROM pré enregistrés de type commercial.
❖ HD DVD
•
Un disque HD DVD (Haute Définition) est un disque optique à haute densité conçu pour le
stockage de données et de vidéos HD.
•
Le HD DVD possède une capacité unicouche de 15 Go et bicouche de 30 Go.
❖ DVD-Video
•
Un disque numérique polyvalent (DVD) peut contenir jusqu’à 135 minutes d’images, 8 langues
audio et 32 langues de sous-titrage. Il est pourvu du système de compression de films MPEG-2 et
du système Dolby Surround numérique vous permettant d’apprécier des images de qualité cinéma
nettes et de couleurs vives.
•
•
Durant le passage de la première couche à la deuxième d’un disque DVD-Vidéo bicouche, il peut se produire
une déformation momentanée de l’image ou une distorsion du son. Cela n’est pas un défaut de l’appareil.
Dès qu’un disque DVD-RW/-R enregistré en mode Vidéo est finalisé, il devient un DVD-Vidéo. Les
DVD de type commercial préenregistrés contenant des films sont aussi considérés comme des
DVD-Vidéos. Cet appareil peut effectuer la lecture de disques DVD (DVD-Vidéo) de type
commercial préenregistrés contenant des films.
❖ CD audio
•
Un disque audio sur lequel des données audio de 44,1 kHz PCM (modulation par impulsions et
codage) sont enregistrées.
•
•
Cet appareil peut effectuer la lecture de disques audio de format CD-DA, CD-R.
La condition de l’enregistrement peut empêcher l’appareil d’effectuer la lecture de certains disques
CD-R.
❖ CD-R
•
•
•
Utilisez un disque CD-R de 700 Mo (80 minutes). Si possible, n’utilisez pas de disque de 800 Mo
(90 minutes) ou plus ; il pourrait être impossible de le lire.
Si les disques CD-R n'ont pas été enregistrés dans une session finalisée, vous risquez d'avoir un
retard en début de lecture, de ne pas pouvoir lire tous les fichiers enregistrés.
En fonction du dispositif utilisé pour les graver, certains disques CD-R peuvent s’avérer
incompatibles avec cet appareil. La capacité de lecture du contenu enregistré sur un médium CD-
R depuis vos CD personnels peut varier selon leur contenu et le type de disque.
12_ premiers pas
Download from Www.Somanuals.com. All Manuals Search And Download.
❖ Lecture de disques DVD-R
•
•
Dès qu’un disque DVD-R enregistré en mode Vidéo est finalisé, il devient un DVD-Vidéo.
Cet appareil peut lire les disques DVD-R enregistrés et finalisés sur un graveur DVD-Vidéo Samsung.
Il peut être incapable de lire certains disques DVD-R selon leur type et la condition de l’enregistrement.
❖ Lecture de disques DVD-RW
•
•
Seuls les disques DVD-RW au format vidéo et finalisés peuvent être lus.
Dès qu’un disque DVD-RW enregistré en mode Vidéo est finalisé, il devient un DVD-Vidéo. La
compatibilité de lecture peut dépendre des conditions d’enregistrement.
Format de disque
❖ DVD-RW /-R(V)
•
Ce format est utilisé pour l’enregistrement de données sur un disque DVD-RW ou DVD-R. Ce type
de disque peut être lu par le lecteur Duo HD lorsqu'il est finalisé.
•
Le lecteur Duo HD ne peut lire ou ajouter un enregistrement sur un disque non finalisé enregistré
en mode Vidéo par un graveur d’une marque différente.
STOCKAGE DES DISQUES ET GESTION
Manipulation des disques
•
Utilisez des disques de forme régulière. Si vous utilisez un disque irrégulier
(d'une forme spéciale), is used, il est possible d'endommager le lecteur Duo
HD.
❖ Manipulation des disques
•
Évitez de toucher la surface d’enregistrement d’un disque.
❖ Disques Blu-ray/HD DVD
•
Si le lecteur n’est pas utilisé pendant une longue période, retirez le disque Blu-ray/HD DVD du
lecteur et rangez le dans son boîtier.
•
Évitez de laisser des empreintes de doigt ou d’égratigner la surface des disque Blu-ray/HD DVD.
❖ DVD-RW et DVD-R
•
Nettoyez avec un nettoyant à disque (non compris) PD (LF-K200DCA1 si disponible). N’utilisez pas
de chiffons ou de nettoyants à CD sur les disques DVD-RW/-R.
❖ DVD-Vidéo, CD audio
•
Utilisez un chiffon doux pour enlever la saleté ou la contamination déposée sur le disque.
❖ Précautions pour la manipulation des disques
•
•
N’écrivez pas sur la face imprimée avec un stylo à bille ou un crayon.
N’utilisez pas de nettoyant antistatique ou en aérosol. De plus, n’utilisez pas de
produits chimiques volatils comme le benzène ou un diluant.
•
Ne collez pas d’étiquettes ou d’autocollants sur les disques. (N’utilisez pas les
disques réparés avec du ruban adhésif ou contenant des restes d’autocollant.)
N'utilisez pas de protecteurs ou de couvercles à l’épreuve des égratignures.
N’utilisez pas de disques imprimés avec les imprimantes d’étiquettes disponibles sur le marché.
Ne chargez pas les disques déformés ou craquelés.
•
•
•
Rangement des disques
Évitez d’endommager les disques puisque les données enregistrées sont vulnérables à l’environnement.
•
•
•
•
•
Évitez de les laisser en plein soleil.
Gardez-les dans un endroit frais et bien aéré.
Rangez-les à la verticale.
Rangez-les dans une jaquette de protection propre.
Si vous déplacez soudainement votre lecteur Duo HD d’un endroit froid vers un endroit chaud, cela
peut produire de la condensation sur les pièces mobiles et les lentilles et provoquer une lecture
anormale. Si tel est le cas, attendez deux heures avant de le brancher sur la prise murale. Insérez
ensuite disque et tentez une nouvelle lecture.
Français _13
Download from Www.Somanuals.com. All Manuals Search And Download.
description
PANNEAU AVANT
TIROIR DISQUE
S’ouvre pour accepter un disque.
TOUCHE OPEN/CLOSE
Permet d'ouvrir et de fermer le tiroir disque.
CAPTEUR DE LA
TÉLÉCOMMANDE
Il détecte tout signal venant de la télécommande.
TOUCHE LECTURE / PAUSE
TOUCHE ARRÊT
Effectue la lecture ou l‘arrête momentanément.
Arrête la lecture.
TOUCHES RECHERCHE / Saute vers le prochain titre / chapitre / piste ou revient vers le titre / chapitre / piste
SAUT
précédent.
AFFICHEUR
Affiche l’état de lecture, l’heure, etc.
TÉMOIN EN VEILLE
Ce témoin s’illumine dès le premier branchement de l’appareil.
TOUCHE ALIMENTATION Allume et éteint le lecteur Duo HD.
AFFICHEUR DU PANNEAU AVANT
Témoin Titre / Liste de lecture / Piste
Témoin de durée de lecture / horloge /
état courant
Témoin de type de disque
Témoin de résolution de sortie vidéo
Témoin de pause
Témoin de lecture
14_ description
Download from Www.Somanuals.com. All Manuals Search And Download.
PANNEAU ARRIÈRE
A
1
Ventilateur
Le ventilateur fonctionne continuellement
lorsque l’appareil est alimenté. Veillez à assurer
un minimum d’espace libre de 10 cm (4 po) de
tous les côtés du ventilateur lors del’installation.
Raccordez à la prise d’entrée analogique 7,1 canaux d’un amplificateur A / V.
(Pour raccorder un récepteur ou un cinéma maison à 5,1 canaux, branchez toutes les
prises de sortie Analog Audio (audio analogue) du lecteur sauf les sorties Surround Back
Left/Surround Back Right (ambiophonique arrière gauche/ambiophonique arrière droite)
7,1CH ANALOG
AUDIO OUT
AUDIO OUT
VIDEO OUT
Raccordez à la prise d’entrée audio des appareils périphériques à l’aide de câbles audio.
Raccordez à la prise d’entrée vidéo des appareils périphériques à l’aide d’un câble vidéo.
COMPONENT VIDEO OUT Pour raccorder les appareils avec entrée vidéo Composantes.
DIGITAL AUDIO OUT
(COAXIAL)
Pour raccorder à un amplificateur possédant une prise d’entrée audio coaxiale.
DIGITAL AUDIO OUT
(OPTICAL)
Raccordez à un amplificateur possédant une prise d’entrée audio optique.
LAN
Utilise un réseau branché sur l'Internet.
Raccordez la prise de sortie HDMI à la prise d’entrée HDMI de votre téléviseur à l’aide
du câble HDMI pour obtenir une qualité d'image supérieure.
HDMI OUT
S-VIDEO OUT
Raccordez la prise d’entrée des appareils périphériques à l’aide d’un câble S-Vidéo.
Français _15
Download from Www.Somanuals.com. All Manuals Search And Download.
télécommande
TOURNÉE DE LA TÉLÉCOMMANDE
16_ télécommande
Download from Www.Somanuals.com. All Manuals Search And Download.
Français _17
Download from Www.Somanuals.com. All Manuals Search And Download.
télécommande
RÉGLAGE DE LA TÉLÉCOMMANDE
Cette télécommande vous permet de contrôler certaines fonctions de votre téléviseur.
Les touches de commande des fonctions comprennent : TV POWER, TV CH ,., TV VOL (VOLUME) + –, TV
MUTE, TV INPUT SEL.. Cependant, la touche DIRECTION/ENTER (DIRECTION/ENTRÉE) ne fonctionne que
lorsque la touche TV INPUT SEL. est sélectionnée.
Suivez les directives ci-dessous pour déterminer la compatibilité de votre téléviseur.
1. Allumez votre téléviseur.
2. Pointez la télécommande vers le téléviseur.
3. Appuyez sur la touche TV POWER et maintenez-la enfoncée, puis saisissez le code à deux chiffres
correspondant à votre marque de téléviseur en appuyant sur les touches numériques appropriées
(voir la liste de codes à la page suivante).
Si votre téléviseur est compatible avec la télécommande, il s’éteint. Il est maintenant programmé
pour fonctionner à l’aide de la télécommande.
Si existe plusieurs codes pour votre marque de téléviseur, essayez-les un après l’autre jusqu’à ce que vous
trouviez le bon.
M
Si vous remplacez les piles de la télécommande, le code doit être reprogrammé.
Après avoir appuyé sur la touche TV, vous pourrez alors contrôler votre téléviseur à l’aide des
touches suivantes.
Touche
Fonction
TV POWER
Pour allumer et éteindre le téléviseur.
Pour sélectionner une source externe
Pour régler le volume du téléviseur.
Pour sélectionner la chaîne souhaitée.
Pour activer ou désactiver le son.
TV INPUT SEL.
TV VOL (+ –)
TV CH (,.
)
TV MUTE
DIRECTION/ENTER
(DIRECTION/ENTRÉE)
Vous permet de vous déplacer vers le haut/bas, sur la gauche/droite ((Ɓ, Ƅ, Ƃ, ƃ) pour
sélectionner l'élément souhaité.
*(ne fonctionne que lorsque la touche TV INPUT SEL. est sélectionnée)
Les fonctions énumérées plus haut peuvent ne pas fonctionner avec tous les téléviseurs. Si vous éprouvez des
difficultés, manipulez directement le téléviseur.
M
CONCERNANT LE BLOC-PILES
Si la télécommande ne fonctionne pas adéquatement :
•
•
•
•
Vérifiez la polarité + – des piles (à anode sèche)
Vérifiez la charge des piles.
Assurez-vous qu’aucun obstacle ne bloque le capteur infrarouge.
Vérifiez la présence d’éclairage fluorescent à proximité.
Disposez des piles selon la règlementation
environnementale de votre localité. Ne les jetez pas avec
les déchets domestiques.
18_ télécommande
Download from Www.Somanuals.com. All Manuals Search And Download.
CODES TÉLÉVISEUR CONTRÔLABLES
Marque
Code
SAMSUNG
TV POWER+01, +02, +03, +04, +05, +06, +07, +08, +09
AIWA
TV POWER+82
ANAM
TV POWER+10, +11, +12, +13, +14, +15, +16, +17, +18
TV POWER+57
BANG & OLUFSEN
BLAUPUNKT
BRANDT
TV POWER+71
TV POWER+73
BRIONVEGA
CGE
TV POWER+57
TV POWER+52
CONTINENTAL EDISON
DAEWOO
EMERSON
FERGUSON
FINLUX
TV POWER+75
TV POWER+19, +20, +23, +24, +25, +26, +27, +28, +29, +30, +31, +32, +33, +34
TV POWER+64
TV POWER+73
TV POWER+06, +49, +57
TV POWER+57
FORMENTI
FUJITSU
TV POWER+84
GRADIENTE
GRUNDIG
HITACHI
TV POWER+70
TV POWER+49, +52, +71
TV POWER+60, +72, +73, +75
TV POWER+52
IMPERIAL
JVC
TV POWER+61, +79
TV POWER+06, +19, +20, +21, +22, +78
TV POWER+06, +69
TV POWER+06, +57
TV POWER+40
LG
LOEWE
LOEWE OPTA
MAGNAVOX
METZ
TV POWER+57
MITSUBISHI
MIVAR
TV POWER+06, +48, +62, +65
TV POWER+52, +77
TV POWER+83
NEC
NEWSAN
NOBLEX
TV POWER+68
TV POWER+66
NOKIA
TV POWER+74
NORDMENDE
PANASONIC
PHILIPS
TV POWER+72, +73, +75
TV POWER+53, +54, +74, +75
TV POWER+06, +55, +56, +57
TV POWER+06, +56, +57
TV POWER+58, +59, +73, +74
TV POWER+06, +56
TV POWER+57
PHONOLA
PIONEER
RADIOLA
RADIOMARELLI
RCA
TV POWER+45, +46
TV POWER+74
REX
SABA
TV POWER+57, +72, +73, +74, +75
TV POWER+74
SALORA
SANYO
TV POWER+41, +42, +43, +44, +48
TV POWER+06
SCHNEIDER
SELECO
TV POWER+74
SHARP
TV POWER+36, +37, +38, +39, +48
TV POWER+71
SIEMENS
SINGER
TV POWER+57
SINUDYNE
SONY
TV POWER+57
TV POWER+35, +48
TV POWER+73
TELEAVA
TELEFUNKEN
THOMSON
THOMSON ASIA
TOSHIBA
WEGA
TV POWER+67, +73, +75, +76
TV POWER+72, +73, +75
TV POWER+80, +81
TV POWER+47, +48, +49, +50, +51, +52
TV POWER+57
YOKO
TV POWER+06
ZENITH
TV POWER+63
Français _19
Download from Www.Somanuals.com. All Manuals Search And Download.
raccordements
Cette section implique plusieurs méthodes de raccorder le lecteur Duo HD à
d'autres périphériques, un téléviseur par exemple.
RACCORDEMENT À UN TÉLÉVISEUR AVEC LE CÂBLE HDMI
1. À l’aide d’un câble HDMI-HDMI (non compris), raccordez la prise HDMI OUT à l’arrière du lecteur Duo HD à la
prise HDMI IN de votre téléviseur.
2. Appuyez sur la touche INPUT (ENTRÉE) de votre télécommande jusqu’à ce que le signal HDMI du lecteur Duo
HD apparaisse à l'écran.
•
Si vous avez adéquatement réglé la télécommande pour fonctionner avec votre téléviseur (Voir les pages
18~19), appuyez sur la touche TV INPUT SEL. de la télécommande et sélectionnez HDMI comme source
externe pour le téléviseur.
Câble HDMI
(non compris)
Si le câble HDMI est branché ou débranché en cours de lecture d'un fichier CDDA, le lecteur interrompt la
lecture.
M
20_ raccordements
Download from Www.Somanuals.com. All Manuals Search And Download.
FONCTION DE DÉTECTION AUTOMATIQUE HDMI
La sortie vidéo du lecteur passe automatiquement en mode HDMI lorsque que vous branchez un câble HDMI alors
qu'il est allumé (voir page 42).
Certains modes de résolution de sortie peuvent ne pas fonctionner en fonction de votre téléviseur.
M
Veuillez vous reporter au manuel d’utilisation du téléviseur pour plus de détails.
Si vous branchez un câble HDMI ou HDMI-DVI sur le téléviseur, la sortie du lecteur Duo HD passe
automatiquement en mode HDMI/DVI en moins de 10 secondes.
Si les câbles Component et HDMI sont tous deux branchés, le mode HDMI est automatiquement sélectionné.
(Voir la page 42)
Lorsque vous raccordez le lecteur à un téléviseur pour la première fois ou à un nouveau téléviseur à l'aide d'un
câble HDMI, la meilleure résolution HDMI disponible sur le téléviseur est automatiquement définie.
Si vous raccordez un téléviseur Samsung au lecteur Duo HD à l’aide d’un câble HDMI, il est possible de
manipuler facilement le lecteur à l’aide de la télécommande du téléviseur. (Cette fonction n’est disponible
qu’avec les téléviseurs Samsung pouvant accueillir Anynet+.) (Voir les pages 43~44)
•
•
HDMI (High Definition Multimedia Interface) (Interface multimédia haute définition)
HDMI est une interface qui permet la transmission de données audio et vidéo par une prise unique.
À l’aide du mode HDMI, le lecteur Duo HD transmet un signal vidéo numérique et audio vers un
téléviseur doté d’une prise d’entrée HDMI et affiche une image aux coloris vivaces.
Description du raccordement HDMI
Prise HDMI – accueille les données vidéo / audio numériques (LPCM (modulation par impulsion et
codage linéaire)) ou Bitstream (train de bits)).
- Le mode HDMI transmet uniquement un signal numérique pur au téléviseur.
- Si votre téléviseur ne peut accueillir la HDCP (Highbandwidth Digital Content Protection) (protection
de contenu numérique à large bande passante), des parasites apparaissent à l’écran.
•
Pourquoi Samsung utilise-t-il le format HDMI ?
Les téléviseurs analogiques requièrent un signal vidéo / audio analogique. Cependant, en cours de
lecture d’un disque BD/HD DVD/DVD, les données transmises au téléviseur sont numériques. Donc,
un convertisseur numérique / analogique (dans le lecteur Duo HD) ou un convertisseur analogique /
numérique (dans le téléviseur) est nécessaire. La qualité d’image se dégrade en cours de conversion à
cause des parasites et des pertes de signal. La technologie HDMI est supérieure parce qu’elle ne
nécessite pas de conversion numérique / analogique et qu’elle transmet un signal numérique pur du
lecteur au téléviseur.
•
•
Qu'est-ce que la technologie HDCP ?
HDCP (High-band width Digital Content Protection) (Protection du contenu numérique à large bande
passante) est un système de protection contre la copie du contenu des disques BD/HD DVD/DVD
transmis par HDMI. Le système fournit un lien numérique sécuritaire entre une source vidéo (PC, DVD,
etc) et un dispositif à écran (téléviseur, projecteur, etc) Le contenu est encodé à la source pour en
prévenir la copie non autorisée.
Qu’est-ce que Anynet+ ?
Anynet+ est une fonction commode offrant un lien de fonctionn ement pour cet appareil par le biais
d’un téléviseur doté de la fonction Anynet+.
- Si votre téléviseur TV possède le logo
, il peut alors accueillir la fonction Anynet+.
- Si vous allumez le lecteur et y insérez un disque, la lecture du disque est lancée, le téléviseur
s’allume automatiquement et passe en mode HDMI.
- Si vous allumez le lecteur avec un disque déjà inséré, puis appuyez ensuite sur la touche Play
(Lecture), le téléviseur s’allume immédiatement et passe en mode HDMI.
Français _21
Download from Www.Somanuals.com. All Manuals Search And Download.
raccordements
RACCORDEMENT À UN TÉLÉVISEUR AVEC LA PRISE DVI
1. À l’aide des câbles HDMI-DVI (non compris), raccordez la prise HDMI OUT à l’arrière du lecteur Duo HD à la
prise DVI IN de votre téléviseur.
2. À l’aide des câbles audio, raccordez les prises AUDIO OUT (rouge et blanche) à l’arrière du lecteur Duo HD aux
prises AUDIO IN (rouge et blanche) de votre téléviseur.
Allumez le lecteur Duo HD et le téléviseur.
3. Appuyez sur la touche TV INPUT SEL. de la télécommande de votre téléviseur jusqu’à ce que le signal DVI du
lecteur Duo HD apparaisse à l’écran du téléviseur.
•
Si vous avez correctement réglé la télécommande pour fonctionner avec votre téléviseur (pages 18~19),
appuyez sur la touche TV INPUT SEL. de la télécommande et sélectionnez HDMI comme source externe
pour le téléviseur.
Si vous branchez le câble HDMI pendant que le lecteur Duo HD est allumé, sa sortie vidéo passe automatiquement
en mode HDMI (voir la page 42).
Selon votre type de téléviseur, certaines résolutions de sortie HDMI peuvent ne pas fonctionner.
M
Veuillez vous reporter au manuel d’utilisation du téléviseur pour plus de détails.
Si vous branchez un câble HDMI ou HDMI-DVI sur le téléviseur, la sortie du lecteur Duo HD passe
automatiquement en mode HDMI/DVI en moins de 10 secondes.
Si les câbles Component et HDMI sont tous deux branchés, le mode HDMI est automatiquement sélectionné.
(Voir la page 42)
Lorsque vous raccordez le lecteur à un téléviseur pour la première fois ou à un nouveau téléviseur à l'aide d'un
câble HDMI, la meilleure résolution HDMI disponible sur le téléviseur est automatiquement définie.
Si le câble HDMI est branché ou débranché en cours de lecture d'un fichier CDDA, le lecteur interrompt la
lecture.
Câble Audio
Câble HDMI-DVI
(non compris)
Rouge
Wlanc
22_ raccordements
Download from Www.Somanuals.com. All Manuals Search And Download.
RACCORDEMENT À UN TÉLÉVISEUR (COMPONENT)
Raccordement de votre téléviseur à l’aide du câble Composantes.
Vous profiterez d’images de haute qualité à reproduction de couleur précise. Le format vidéo Composantes sépare
les éléments de l’image en signaux noir et blanc (Y), bleu (PB), et rouge (PR) pour reproduire des images lumineuses
et plus claires. (Les signaux audio sont transmis par la sortie audio.)
1. À l’aide des câbles vidéo composante (non compris), raccordez les prises COMPONENT VIDEO OUT à l’arrière
du lecteur Duo HD aux prises COMPONENT IN de votre téléviseur.
2. À l’aide des câbles audio, raccordez les prises AUDIO OUT (rouge et blanche) à l’arrière du lecteur Duo HD aux
prises AUDIO IN (rouge et blanche) de votre téléviseur. Allumez le lecteur Duo HD et le téléviseur.
3. Appuyez sur le sélecteur d’entrée de la télécommande de votre téléviseur jusqu’à ce que le signal Composantes
du lecteur Duo HD apparaisse à l’écran du téléviseur.
•
Si vous avez correctement réglé la télécommande pour fonctionner avec votre téléviseur (Voir les pages
18~19), appuyez sur la touche TV INPUT SEL. de la télécommande et sélectionnez COMPONENT comme
source externe pour le téléviseur.
Câble Audio
Câble Composantes
(non compris)
Vert
Bleu
Rouge
Wlanc
Selon le manufacturier, les prises composantes de votre téléviseur sont codées “R-Y, B-Y, Y” ou “Cr, Cb, Y”
plutôt que “Pr, Pb, Y”. Le nombre de prises et leur position peuvent varier selon le type de téléviseur. Veuillez
vous reporter au manuel d’utilisation du téléviseur pour plus de détails.
M
Vous pouvez choisir parmi une variété de résolutions comprenant 1080i, 720p, 480p and 480i, selon le type
de disque. (Voir la page 42)
La résolution réelle peut varier de celle configurée dans le menu Param. (CONFIGURATION) si les câbles
Component (Composantes) et HDMI sont tous deux branchés. La résolution peut aussi varier en fonction du
disque utilisé. (Voir à la page 42)
En mode lecture d'un DVD, si les prises HDMI (interface multimédia haute définition) et Component
(composantes) sont toutes deux raccordées et que vous sélectionnez le mode Component (composantes), le
menu Display Setup (configuration de l'écran) affiche la résolution de sortie 1080p. La résolution est en fait
480i.
Français _23
Download from Www.Somanuals.com. All Manuals Search And Download.
raccordements
RACCORDEMENT À UN TÉLÉVISEUR (S-VIDEO)
Raccordement de votre téléviseur à l’aide du câble S-Vidéo.
Vous profiterez d’images de haute qualité. Le format S-Vidéo sépare les éléments de l’image en signaux noir et
blanc (Y) et couleur (C) pour reproduire une image plus nette que le mode d'entrée vidéo ordinaire. (Les signaux
audio sont transmis par la sortie audio.)
1. À l’aide d’un câble S-Vidéo (non compris), raccordez la prise S-VIDEO OUT à l’arrière du lecteur Duo HD à la
prise S-VIDEO IN de votre téléviseur.
2. À l’aide des câbles audio, raccordez les prises AUDIO OUT (rouge et blanche) à l’arrière du lecteur Duo HD
aux prises AUDIO IN (rouge et blanche) de votre téléviseur. Allumez le lecteur Duo HD et le téléviseur.
3. Appuyez sur la touche TV INPUT SEL. de la télécommande de votre téléviseur jusqu’à ce que le signal S-Vidéo
du lecteur Duo HD apparaisse à l’écran du téléviseur.
•
Si vous avez correctement réglé la télécommande pour fonctionner avec votre téléviseur (Voir les pages 18~19),
appuyez sur la touche TV INPUT SEL. de la télécommande et sélectionnez S-VIDEO comme source externe
pour le téléviseur.
Câble S-Vidéo
(non compris)
Câble Audio
Rouge
Wlanc
La résolution de la source S-VIDÉO est toujours à 480i quel que soit le réglage du menu Param. (RÉGLAGES).
(Voir la page 42)
M
24_ raccordements
Download from Www.Somanuals.com. All Manuals Search And Download.
RACCORDEMENT À UN TÉLÉVISEUR (VIDEO)
1. À l’aide des câbles vidéo / audio, raccordez les prises de sortie VIDEO (jaune) / AUDIO OUT (rouge et
blanche) à l’arrière du lecteur Duo HD aux prises d’entrée VIDEO (jaune) / AUDIO IN(rouge et blanche) de
votre téléviseur.
2. Allumez le lecteur Duo HD et le téléviseur.
3. Appuyez sur le sélecteur d’entrée de la télécommande de votre téléviseur jusqu’à ce que le signal vidéo du
lecteur Duo HD apparaisse à l’écran du téléviseur.
•
Si vous avez adéquatement réglé la télécommande pour fonctionner avec votre téléviseur (pages 18~19),
appuyez sur la touche TV INPUT SEL. de la télécommande et sélectionnez VIDEO comme source externe
pour le téléviseur.
Jaune
Rouge
Wlanc
Les câbles audio peuvent générer des parasites lorsqu’ils sont placés trop près des cordons d’alimentation.
M
Si vous souhaitez raccorder un amplificateur, reportez-vous à la page reliée au raccordement d’un
amplificateur. (Voir les pages 26~29)
Le nombre et la position des prises peuvent varier selon le type de téléviseur. Veuillez vous reporter au manuel
d’utilisation du téléviseur pour plus de détails.
Si le téléviseur ne possède qu’une seule prise d’entrée audio, raccordez-la à la prise [AUDIO OUT] [gauche]
(blanche) du lecteur Duo HD.
La résolution de la source VIDÉO est toujours à 480i quel que soit le réglage du menu Param..
(Voir la page 42)
Français _25
Download from Www.Somanuals.com. All Manuals Search And Download.
raccordements
RACCORDEMENT À UN SYSTÈME AUDIO (AMPLIFICATEUR À 2 CANAUX)
1. À l’aide des câbles audio, raccordez les prises AUDIO OUT (rouge et blanche) à l’arrière du lecteur Duo HD
aux prises AUDIO IN (rouge et blanche) de votre amplificateur.
2. À l'aide des câbles vidéo, raccordez les prises HDMI, COMPONENT, S-VIDEO ou VIDEO OUT sur le panneau
arrière du lecteur Duo HD aux prises HDMI, COMPONENT, S-VIDEO ou VIDEO IN de votre téléviseur tel que
décrit aux pages 20 à 25.
3. Allumez le lecteur Duo HD, le téléviseur et l’amplificateur.
4. Appuyez sur la touche de sélection d’entrée de l’amplificateur pour sélectionner entrée externe pour entendre
le son depuis le lecteur Duo HD. Reportezvous au manuel de l’utilisateur de votre amplificateur pour en régler les
entrées audio.
Câble Audio
Amplificateur
stéréo à 2 canaux
Rouge
Wlanc
Fabriqué sous licence de Dolby Laboratories. “Dolby” et le symbole du double D sont des marques déposées
des laboratoires Dolby.
M
Manufactured under license under U.S. Patent #: 5,451,942 & other U.S. and worldwide patents issued &
pending. DTS and DTS Digital Out are registered trademarks and the DTS logos and Symbol are trademarks of
DTS, Inc. © 1996-2007 DTS, Inc. All Rights Reserved.
26_ raccordements
Download from Www.Somanuals.com. All Manuals Search And Download.
RACCORDEMENT À UN SYSTÈME AUDIO (AMPLIFICATEUR À 7,1 CANAUX)
1. À l’aide des câbles audio, raccordez les prises 7.1 ANALOG AUDIO OUT (Front R, Front L, CENTER,
SUBWOOFER, Surround L, Surround R, SURR.BACK L , SURR.BACK R) à l'arrière du lecteur Duo HD aux
prises 7.1 ANALOG AUDIO IN
(Front R, Front L, CENTER, SUBWOOFER, Surround L, Surround R, SURR.BACK L , SURR.BACK R) de
votre amplificateur.
2. À l'aide des câbles vidéo, raccordez les prises HDMI, COMPONENT, S-VIDEO ou VIDEO OUT sur le panneau
arrière du lecteur Duo HD aux prises HDMI, COMPONENT, S-VIDEO ou VIDEO IN de votre téléviseur tel que
décrit aux pages 20 à 25.
3. Allumez le lecteur Duo HD, le téléviseur et l’amplificateur.
4. Appuyez sur la touche de sélection d’entrée de l’amplificateur pour sélectionner entrée externe pour entendre
le son depuis le lecteur Duo HD. Reportezvous au manuel de l’utilisateur de votre amplificateur pour en régler
les entrées audio.
Amplificateur
7,1 canaux
Veuillez baisser le volume avant d’allumer l’amplificateur. Un son fort soudain peut endommager les enceintes
acoustiques et vos oreilles.
M
Veuillez réglez le signal audio depuis l’écran menu selon l’amplificateur. (Voir les pages 37~38)
La position des prises peut varier selon le type d’amplificateur. Veuillez vous reporter au manuel d’utilisation de
l’amplificateur pour plus de détails.
Les sorties avant gauche et droite du lecteur et de l'amplificateur 7.1 Channel doivent être branchées afin que
vous puissiez entendre la trame sonore du menu de certains disques Blu-ray/HD DVD.
Pour raccorder un récepteur ou un cinéma maison à 5,1 canaux, branchez toutes les prises de sortie Analog
Audio (audio analogue) du lecteur sauf les sorties Surround Back Left/Surround Back Right (ambiophonique
arrière gauche/ambiophonique arrière droite.
Français _27
Download from Www.Somanuals.com. All Manuals Search And Download.
raccordements
RACCORDEMENT À UN SYSTÈME AUDIO (DOLBY NUMÉRIQUE),
AMPLIFICATEUR DTS (SYSTÈME CINÉMA NUMÉRIQUE)
1. Si vous utilisez un câble optique (non compris), raccordez la prise DIGITAL AUDIO OUT (OPTICAL) à l’arrière
du lecteur Duo HD à la prise DIGITAL AUDIO IN (OPTICAL) de votre amplificateur. Si utiliza un cable coaxial
(no incluido), conecte el terminal DIGITAL AUDIO OUT (COAXIAL) situado en la parte posterior del
Reproductor de discos Duo HD con el terminal DIGITAL AUDIO IN (COAXIAL) del amplificador.
2. À l'aide des câbles vidéo, raccordez les prises HDMI, COMPONENT, S-VIDEO ou VIDEO OUT sur le panneau
arrière du lecteur Duo HD aux prises HDMI, COMPONENT, S-VIDEO ou VIDEO IN de votre téléviseur tel que
décrit aux pages 20 à 25.
3. Allumez le lecteur Duo HD, le téléviseur et l’amplificateur.
4. Appuyez sur la touche de sélection d’entrée de l’amplificateur pour sélectionner entrée externe pour entendre
le son depuis le lecteur Duo HD. Reportez-vous au manuel de l’utilisateur de votre amplificateur pour en régler
les entrées audio.
ou
Veuillez baisser le volume avant d’allumer l’amplificateur. Un son fort soudain peut endommager les enceintes
acoustiques et vos oreilles.
M
Veuillez réglez le signal audio depuis l’écran menu selon l’amplificateur. (Voir les pages 37~38)
La position des prises peut varier selon le type d’amplificateur. Veuillez vous reporter au manuel d’utilisation de
l’amplificateur pour plus de détails.
Si vous utilisez ce raccordement, le son des disques à trame sonore LPCM (modulation linéaire par impulsion
et codage) n'est reproduit que sur les deux canaux avant.
28_ raccordements
Download from Www.Somanuals.com. All Manuals Search And Download.
RACCORDEMENT À UN SYSTÈME AUDIO
(AMPLIFICATEUR COMPATIBLE HDMI)
1. À l’aide du câble HDMI-HDMI(non compris), raccordez la prise HDMI OUT à l’arrière du lecteur Duo HD à la
prise HDMI IN de votre amplificateur.
2. À l’aide du câble HDMI-HDMI, raccordez la prise HDMI OUT de l’amplificateur à la prise HDMI IN de votre
téléviseur.
3. Allumez le lecteur Duo HD, le téléviseur et l’amplificateur.
4. Appuyez sur la touche de sélection d’entrée de l’amplificateur pour sélectionner entrée externe pour entendre
le son depuis le lecteur Duo HD. Reportezvous au manuel de l’utilisateur de votre amplificateur pour en régler les
entrées audio.
Veuillez baisser le volume avant d’allumer l’amplificateur. Un son fort soudain peut endommager les enceintes
acoustiques et vos oreilles.
M
Veuillez réglez le signal audio depuis l’écran menu selon l’amplificateur. (Voir les pages 37~38)
La position des prises peut varier selon le type d’amplificateur. Veuillez vous reporter au manuel d’utilisation de
l’amplificateur pour plus de détails.
Français _29
Download from Www.Somanuals.com. All Manuals Search And Download.
raccordements
BRANCHEMENT SUR L'INTERNET
Si votre lecteur Duo HD est branché sur l'Internet, vous pouvez accéder à et profiter
d'autres contenus HD DVD.
Certains sites HD DVD comportent des logiciels de contrôle téléchargeables
(micrologiciels) afin d'en améliorer l'interactivité.
S'il est disponible, vous pouvez mettre le micrologiciel du lecteur à niveau par Internet.
1. À l’aide d’un câble RLE (câble UTP), raccordez le terminal RLE à l’arrière du lecteur Duo HD au terminal RLE de
votre modem.
Branchement à
Vers le port LAN
l'aide d'un routeur
(ex. DSL - ligne d'abonné
numérique à débit asymétrique)
Modem à large bande
(avec routeur intégré)
Modem à large bande
Routeur
Service à large
bande
Service à
large bande
Vers le port LAN
Vers le port LAN
L'accès à l'Internet peut vous être refusé en fonction du routeur que vous utilisez ou des règlements de votre
fournisseur de services Internet.
M
Pour plus de détails, contactez votre fournisseur de services Internet.
Pour les utilisateurs DSL : veuillez utiliser un routeur pour effectuer le branchement au réseau.
La connectivité à l'Internet de la HD DVD dépend du contenu du disque.
30_ raccordements
Download from Www.Somanuals.com. All Manuals Search And Download.
fonctions de base de votre
lecteur Duo HD
Cette section vous présente les fonctions de lecture de base et de la lecture selon
le type de disque.
AVANT D’EFFECTUER UNE LECTURE
•
Allumez votre téléviseur et définissez la source vidéo appropriée (l’entrée sur laquelle le lecteur Duo HD est
branché).
•
Si vous avez raccordé un système audio externe, allumez-le et réglez l'entrée audio.
Cet écran s’affiche au premier branchement du lecteur, dès que vous appuyez sur la touche POWER :
Si vous souhaitez modifier la langue, appuyez sur une touche
numérique. (Cet écran s’affiche uniquement au premier
branchement du lecteur.) Si la langue de l’écran de
MENU LANGUAGE SELECTION
configuration n’est pas réglée, les réglages peuvent changer à
chaque fois que vous l’allumez ou l’éteignez. Par conséquent,
Press 1 for English
Pulsar 2 para Español
Touche 3 pour Français
!
veillez à sélectionner la langue souhaitée. Vous pouvez
Macrovision : UBS01
modifier la langue du menu après l’avoir sélectionnée en
appuyant pendant plus de 5 secondes sur la touche
panneau avant de l’appareil sans disque dans l’unité. La
sur le
fenêtre MENU LANGUAGE SELECTION (SÉLECTION DE LA
LANGUE DU MENU) apparaît de nouveau pour vous
permettre de régler la langue de votre choix.
Disques que vous ne pouvez pas lire avec ce lecteur.
M
• BD-R
• BD-RE
• DVD-ROM
• CVD
• HD DVD-R
• DVD-RAM
• CD-I
• DVD+RW
• CDV
• CD-RW
• DVD+R
• CD-ROM
• Super Audio CD (sauf CD à couche)
La compatibilité de lecture peut dépendre des conditions d’enregistrement.
• DVD-R • CD-R • DVD-RW (mode V)
• disques CDG - audio uniquement et non les graphiques.
• Le type de disque ou les conditions d’enregistrement peuvent empêcher le lecteur de lire certains disques
CD-R et DVD-R.
Blu-ray/HD DVD est un nouveau format toujours en évolution. En conséquence, les problèmes de compatibilité
avec de nouveaux formats ou formats existants de disque sont possibles. Tous les disques ne sont pas
compatibles et tous ne peuvent être lus. Pour plus de renseignements, reportez-vous aussi aux chapitres
Types de disque, Caractéristiques et Avis de conformité et de compatibilité dans ce manuel. Si vous éprouvez
des problèmes de compatibilité, veuillez contacter un centre d’aide à la clientèle SAMSUNG.
L'appareil ne peut pas lire le contenu des disques CD-R et DVD-RW/-R tel que les fichiers divx, avi, mpg, mov,
wma, mp3 et digital photo view (JPEG).
Français _31
Download from Www.Somanuals.com. All Manuals Search And Download.
fonctions de base de votre
lecteur Duo HD
NAVIGATION DANS LES MENUS À L’ÉCRAN
Vidéo
Information système
Système
Fus. Hor.
Musique
Param.
Param.Horloge
Réglage de langue
Audio
Gestion stockage durable
Dém. m. à niv.
Sous-titre
Menus du Disque
Menus
Disque format Twin
Options Audio
Sortie numérique
Sous Echantionnage PCM
Compression dyna.
Param. HP
Format écran
Options D'affichage
Trame Vidéo (24 Fs)
Résolution
Message écran
Affichage du Panneau
Configuration HDMI
Config. réseau
Anynet+ (HDMI-CEC)
Format HDMI
Précision
TCP/IP
Réduction bruit DVD
Proxy
Témoin
Débit réseau
Serveur NTP
MAC Adresse
Contrôle Parental
LECTURE D’UN DISQUE
1. Appuyez sur la touche OPEN/CLOSE ( ).
Le témoin EN VEILLE s’éteint et le tiroir disque s’ouvre.
2. Placez délicatement un disque dans le tiroir, côté étiquette vers le haut.
3. Appuyez sur la touche LECTURE / PAUSE ( ) ou OPEN/CLOSE ( ) pour fermer le tiroir disque.
Lorsque vous arrêtez la lecture, le lecteur enregistre l’endroit où vous vous êtes arrêté ; conséquemment,
lorsque vous appuyez de nouveau sur la touche LECTURE / PAUSE ( ) la lecture recommence à l’endroit où
M
elle s’est arrêtée.
Appuyez deux fois sur la touche ARRÊTER ( ) en cours de lecture pour désactiver la fonction Continuer.
Pour arrêter momentanément la lecture, appuyez sur la touche LECTURE / PAUSE( ) Pour reprendre la
lecture, appuyez de nouveau sur la touche LECTURE / PAUSE( ).
Si le lecteur est laissé en mode d’arrêt pour plus de 10 minutes sans interface utilisateur, un économiseur
d’écran apparaît sur votre téléviseur. Si le lecteur est laissé en mode économiseur d’écran pour plus de 30
minutes, l’alimentation est interrompue automatiquement sauf durant la lecture d’un CDDA. (Fonction
d’interruption automatique d’alimentation)
32_ fonctions de base
Download from Www.Somanuals.com. All Manuals Search And Download.
COMMENT LIRE UN DISQUE HD DVD DOUBLE-FORMAT
A
Pour lire un disque HD DVD double-format, vous devez sélectionner HD DVD ou DVD avant d'insérer le
disque. Cette fonction n'est activée qu'avec un disque HD DVD double-format.
1. Appuyez sur la touche MENU, appareil en mode d'arrêt.
2. Appuyez sur les touches ▲▼ pour sélectionner Param., puis appuyez sur la touche ENTER ou
►.
3. Appuyez sur les touches ▲▼ pour sélectionner Système, puis appuyez sur la touche ENTER ou
►.
4. Appuyez sur les touches ▲▼ pour sélectionner Disque format Twin, puis appuyez sur la touche
ENTER ou
►.
5. Sélectionnez HD DVD ou DVD dans le menu puis appuyez sur ENTER (ENTRÉE).
Il est impossible de modifier le format en cours de lecture.
M
UTILISATION DES FONCTIONS RECHERCHE ET SAUT
Vous pouvez effectuer une recherche rapide dans un chapitre ou sur une piste en cours de lecture et utiliser la
fonction de saut pour vous déplacer sur la sélection suivante.
hAZCV
Recherche dans un chapitre ou sur une piste
En cours de lecture, appuyez sur la touche RECHERCHER (
) .
•
Appuyez sur cette touche si vous souhaitez effectuer une recherche sur un BD/HD DVD/DVD plus
rapidement.
•
•
Si vous appuyez sur la touche RECHERCHER ( ), X2 X4 X8 X16 X32 X128
Si vous appuyez sur la touche RECHERCHER ( ), X2 X4 X8 X16 X32 X128
Aucun son n’est perceptible en mode de recherche.
M
hAZCV
Saut de pistes
En cours de lecture, appuyez sur la touche SAUTER (
) .
Lors de la lecture d’un BD/HD DVD/DVD, pour passer au chapitre suivant, appuyez sur la touche SAUT
) Pour retourner au début du chapitre, appuyez sur la touche SAUT ( ) Pour retourner au début du
chapitre précédent, appuyez de nouveau.
(
Français _33
Download from Www.Somanuals.com. All Manuals Search And Download.
fonctions de base de votre
lecteur Duo HD
POUR RETOURNER AU DÉBUT DU CHAPITRE PRÉCÉDENT,
APPUYEZ DE NOUVEAU.
hAZCV
Lecture au ralenti
En mode PAUSE ou ARRÊT, appuyez sur la touche SLOW de la télécommande pour effectuer la
lecture au ralenti.
•
•
Si vous appuyez sur la touche SLOW,
Pour repasser en lecture à vitesse normale, appuyez sur la touche LECTURE / PAUSE ( ).
1/8
1/4
1/2
L’icône ( ) indique qu’une touche non valide a été actionnée.
Aucun son n’est perceptible en mode LENT.
M
Le ralenti ne fonctionne qu’en direction avant.
hAZCV
Lecture Step Motion (Image par image)
Appuyez sur la touche STEP de la télécommande en cours de lecture.
•
•
•
A chaque appui sur la touche, une nouvelle image apparaît.
L’image suivante est activée lorsque vous appuyez sur la touche STEP.
Appuyez sur la touche LECTURE / PAUSE ( ) pour reprendre la lecture normale.
Aucun son n’est perceptible en mode image par image.
Le pas-à-pas ne fonctionne qu’endirection avant.
M
34_ fonctions de base
Download from Www.Somanuals.com. All Manuals Search And Download.
configuration du système
Vous pouvez configurer les fonctions du lecteur à votre goût, pour une utilisation
optimale en fonction de l'ambiance de votre foyer.
RÉGLAGE DE L’HORLOGE
Sélectionnez votre fuseau horaire
1. Appuyez sur la touche MENU, appareil en mode d'arrêt.
Information système
Musique
Param.
2. Appuyez sur les touches ▲▼ pour sélectionner Param.,
puis appuyez sur la touche ENTER ou
3. Appuyez sur les touches ▲▼ pour sélectionner Système,
puis appuyez sur la touche ENTER ou
4. Appuyez sur les touches ▲▼ pour sélectionner Fus. Hor.,
puis appuyez sur la touche ENTER ou
Système
Fus. Hor.
►
.
No Disc
Réglage de langue
Options Audio
Param.Horloge
Gestion stockage durable
Dém. m. à niv.
►.
Options D'affichage
Configuration HDMI
Config. réseau
Disque format Twin
:
HD DVD
►.
Contrôle Parental
5. Utilisez les touches ▲▼ pour déplacer le curseur sur le
fuseau horaire approprié à votre région puis appuyez sur
ENTER (ENTRÉE).
Information système
Musique
Par
Fus. Hor.
Hawaï
No Disc
Alaska
Pacifique
Montagne
Centre
Orient
D DVD
Atlantique
Terre-Neuve
Vous devriez activer le serveur NTP avant de régler l'heure exacte de votre région.
(Voir page 49)
M
Réglez l'horloge
Pour régler, suivez les étapes 1 et 3 ci-haut.
Information système
Fus. Hor.
Musique
Param.
4. Appuyez sur les touches ▲▼ pour sélectionner Param.
Système
Param.Horloge
No Disc
Horloge, puis appuyez sur la touche ENTER ou
►.
Réglage de langue
Options Audio
Gestion stockage durable
Dém. m. à niv.
5. Appuyez sur les touches ◄► pour vous déplacer sur « j
(jour) »,« h (heure) », « min (min) » et « m/am ». Réglez la
date et l'heure en appuyant sur les touches ▲▼, puis
appuyez sur ENTER (ENTRÉE).
Options D'affichage
Configuration HDMI
Config. réseau
Disque format Twin
:
HD DVD
Contrôle Parental
Information système
Fus. Hor.
Musique
Param.
Système
Param.Horloge
No Disc
Param.Horloge
h min m/am
j
OCT/01/2007
02 05 PM
Lundi
Revenir
D DVD
s
Enreg
²
Config. réseau
Contrôle Parental
Français _35
Download from Www.Somanuals.com. All Manuals Search And Download.
réglage de langue
CONFIGURATION DES PARAMÈTRES DE LANGUE
Si vous avez préalablement réglé les options audio, soustitrage, menu disque et menu lecteur, elles apparaissent
automatiquement à chaque fois que vous visionnez un film.
1. Arrêtez l’appareil, puis appuyez sur la touche MENU.
Système
Musique
2. Appuyez sur les touches ▲▼ pour sélectionner Param.,
puis appuyez sur la touche ENTER ou
Réglage de langue
Param.
No Disc
No Disc
No Disc
►.
Options Audio
Options D'affichage
Configuration HDMI
Config. réseau
Contrôle Parental
Système
Musique
3. Appuyez sur les touches▲▼ pour sélectionner
Réglage de langue
Audio
:
Original
Param.
Réglage de langue, puis appuyez sur la touche ENTER
Options Audio
Sous-titre
:
:
:
Automatiq.
English
ou
►
Le menu de param de la langue s’affiche.
Options D'affichage
Configuration HDMI
Config. réseau
Menus du Disque
Menus
Français
Contrôle Parental
4. Appuyez sur les touches ▲▼ pour sélectionner l’option de langue
appropriée, puis appuyez sur la touche ENTER ou ►
Système
Musique
.
Réglage de langue
Audio
Original
Param.
•
Audio : langue du disque.
English
Options Audio
Sous-titre
Français
•
•
Sous-titre : sous-titrage du disque.
Menus du Disque : pour le menu du disque.
Please delete disque.
Options D'affichage
Configuration HDMI
Config. réseau
Menus du Disque
Menus
Deutsch
Español
Italiano
Contrôle Parental
•
Menus : pour le menu à l’écran de votre
lecteur Duo HD.
5. Appuyez sur les touches ▲▼ pour sélectionner la langue appropriée, puis appuyez sur la touche
ENTER.
Appuyez sur la touche RETURN ou ◄ pour revenir au menu précédent. Appuyez sur la touche MENU pour
quitter le menu.
M
La langue sélectionnée n’apparaîtra que si elle est accueillie par le disque.
36_ réglage de langue
Download from Www.Somanuals.com. All Manuals Search And Download.
options audio
CONFIGURATION DES OPTIONS AUDIO
Vous permet de régler l’appareil audio et le son en fonction du système audio utilisé avec le lecteur.
1. Arrêtez l’appareil, puis appuyez sur la touche MENU.
Système
Réglage de langue
Musique
2. Appuyez sur les touches ▲▼ pour sélectionner Param.,
puis appuyez sur la touche ENTER ou
►.
Options Audio
Param.
No Disc
Options D'affichage
Configuration HDMI
Config. réseau
Contrôle Parental
3. Appuyez sur les touches ▲▼ pour sélectionner Options
Audio, puis appuyez sur la touche ENTER
Musique
Réglage de langue
►.
Options Audio
Sortie numérique
:
PCM
Param.
No Disc
Options D'affichage
Configuration HDMI
Config. réseau
Sous Echantionnage PCM
Compression dyna.
Param. HP
:
:
Oui
Oui
4. Appuyez sur les touches ▲▼ pour sélectionner l’option
audio appropriée telle que décrite ci-bas, puis appuyez sur
Contrôle Parental
la touche ENTER ou
►.
5. Appuyez sur les touches ▲▼ pour sélectionner l’élément
approprié, puis appuyez sur la touche ENTER.
Appuyez sur la touche RETURN ou ◄ pour revenir au menu précédent. Appuyez sur la touche MENU pour
quitter le menu.
M
Sortie numérique
Les BD et HD DVD peuvent comprendre jusqu'à trois flux de données audio.
- Audio primaire : piste audio principale du disque
Système
Musique
Réglage de langue
- Audio secondaire : Piste audio pour la fenêtre PIP (image
sur image) d'un HD DVD
Options Audio
Sortie numérique
PCM
Param.
No Disc
Trainbits(réencoder)
Options D'affichage
Configuration HDMI
Config. réseau
Sous Echantionnage PC
Compression dyna.
Param. HP
:
Trainbits(audiophile)
- Effets audio : Un son se fait entendre à chaque fois que
vous sélectionnez un élément du menu BD/HD DVD.
Oui
Contrôle Parental
•
PCM (modulation par impulsions et codage) : à sélectionner
si votre système (récepteur ou cinéma maison) ne peut pas
décoder les signaux Dolby numériques. Les signaux audio
primaires, secondaires et les effets audio sont disponibles.
•
•
Trainbits(réencoder) : réencodage des flux audio primaires secondaires et effets audio pour le DTS
(son numérique cinéma).
Trainbits(audiophile) : offre une qualité audio de plus haut niveau pour le visionnement d'un disque.
Seul la piste audio primaire (trame sonore principale du film) est reproduite.
Si vous sélectionnez une trame sonore LPCM sur un disque, la sortie se règle automatiquement sur PCM.
Veillez à bien choisir la sortie numérique adéquate ou vous ne percevrez pas le son ou vous n’entendrez qu’un
bruit fort.
M
Si vous visionnez un film enregistré en format Dolby numérique, veillez vous assurer que la sortie numérique
soit bien réglée sur Bitstream.
Si le périphérique HDMI (récepteur, téléviseur) ne peut pas accueillir les formats compressés
(Dolby numérique, DTS), le signal des sorties audio est acheminé au format PCM.
La piste audio secondaire et les effets audio ne sont pas reproduits par les DVD ordinaires.
Certains disques BD et HD DVD n'offrent pas de piste audio secondaires et d'effets audio.
Français _37
Download from Www.Somanuals.com. All Manuals Search And Download.
options audio
Échantillonnage PCM
•
Oui : à sélectionner si l’amplificateur raccordé au lecteur
n’est pas compatible avec la fréquence de 96 KHz. Les
signaux de 96 kHz sont abaissés en fréquence à 48 kHz
Non : à sélectionner si l’amplificateur raccordé au lecteur est
compatible avec la fréquence de 96 KHz. Les signaux sont
transmis sans aucune modification.
Système
Réglage de langue
Sortie numérique
:
:
PCM
Musique
Options Audio
Sous Echantionnage PCM
Oui
Param.
No Disc
Non
Ou
Options D'affichage
Configuration HDMI
Config. réseau
Compression dyna.
Param. HP
•
Contrôle Parental
Même lorsque la fonction PCM Down Sampling (Échantillonnage PCM) est réglée sur Off (Désactivée), le signal
de sortie de certains disques n'acheminera l'échantillonnage audio que par le biais des sorties coaxiales ou
optiques.
M
HDMI
•
Si votre téléviseur n’est pas compatible avec les formats de compression de canaux multiples (Dolby
numérique, DTS), vous devriez régler la fonction audio numérique sur PCM.
•
Si votre téléviseur n’est pas compatible avec le taux d’échantillonnage LPCM au delà de 48 kHz, vous
devriez activer l’échantillonnage PCM.
Compression dynamique
Cette fonction n’est active que lorsqu'un signal Dolby
numérique est détecté.
Système
Sortie numérique
:
:
PCM
Oui
Musique
Réglage de langue
Sous Echantionnage PCM
Param.
Options Audio
Compression dyna.
Oui
No Disc
•
•
Non : vous profitez de films à étendue dynamique standard.
Non
Options D'affichage
Configuration HDMI
Config. réseau
Param. HP
Oui : lorsque les trames sonores d’un film sont lues à bas
volume ou avec des enceintes plus petites, le système peut
appliquer la compression adéquate pour rendre les
passages de bas niveau plus intelligibles et prévenir que les
passages dramatiques ne deviennent trop forts.
Contrôle Parental
38_ options audio
Download from Www.Somanuals.com. All Manuals Search And Download.
CONFIGURATION DES PARAMÈTRES DE LANGUE
Si vous avez raccordé celecteur à un amplificateur/syntoniseur ou à un cinéma maison par les prises de sortie
analogique à 7,1 canaux, vous devez régler les options des enceintes acoustiques pour la meilleure qualité de son.
Système
1. Arrêtez l’appareil, puis appuyez sur la touche MENU.
Musique
Réglage de langue
2. Appuyez sur les touches ▲▼ pour sélectionner Param.,
puis appuyez sur la touche ENTER ou
Options Audio
Param.
No Disc
►.
Options D'affichage
Configuration HDMI
Config. réseau
Contrôle Parental
3. Appuyez sur les touches ▲▼ pour sélectionner Options
Audio, puis appuyez sur la touche ENTER ou
Système
Sous Echantionnage PCM
Compression dyna.
:
:
Oui
Oui
Musique
Réglage de langue
►.
Options Audio
Param. HP
Param.
No Disc
Options D'affichage
Configuration HDMI
Config. réseau
Contrôle Parental
4. Appuyez sur les touches ▲▼ pour sélectionner Param.
HP, puis appuyez sur la touche ENTER ou
Système
Sous Echantionnage PCM
Compression dyna.
:
:
Oui
Oui
Musique
Réglage de langue
►.
Param. HP
Pa
No Disc
Avant
LFE
Centre
Ambiance
Ambiance Ret.
:
:
:
:
:
Petit
Oui
Petit
Petit
Petit
5. Appuyez sur les touches ▲▼◄► pour sélectionner
l’enceinte appropriée, puis appuyez sur la touche ENTER.
U
ti
l.
Enreg
Annuler
6. Lorsque terminé, utilisez les flèches ▲▼◄► pour
sélectionner Enreg, puis appuyez sur la touche ENTER.
Si vous ne souhaitez pas enregistrer votre travail, utilisez
les flèches ▲▼◄► pour sélectionner Annuler, puis
appuyez sur ENTER.
a
Tonalité d'essai
Sélect.
²
Revenir
Appuyez sur la touche RETURN ou ◄ pour revenir au menu précédent.
M
Configuration des enceintes acoustiques
Caisson des basses
•
Oui : (Effet de basses fréquences) sélectionnez
pour activer le caisson des basses.
Non : sélectionnez pour désactiver le caisson
des basses. (Cette option ne peut être
sélectionnée que lorsque les enceintes avant
(L+R) sont réglées sur Large.
Avant (L, R)
Large, Petit
Centre (C)
Large, Petit, Aucun
Large, Petit, Aucun
Oui, Non
•
Ambiance (LS, RS)
Caisson de basses (LFE)
Ambiophonie arrière
(BSG, BSD)
Large, Petit, Aucun
Appuyez sur la touche ROUGE (A)
•
Une tonalité d’essai est transmise vers L
RS BSD BSG LS LFE
C
R
Enceinte acoustique
afinque vous puissiez vérifier l’agencement
des enceintes acoustiques.
Appuyez de nouveau sur la touche ROUGE
(A) pour arrêter la tonalité d’essai.
La tonalité d'essai ne peut être activée que
lorsque l'appareil ne renferme aucun disque.
•
Large : transmet toute la gamme des sons depuis les graves
de moins de 100 Hz.
•
•
•
•
Petit : Si l’effet de basses fréquences est activé, les graves
de moins de 100 Hz seront transmises par le caisson des
basses plutôt que par les enceintes. Si l’effet de basses
fréquences est désactivé, et que les enceintes avant sont
réglées à Large, le son sera transmis par les enceintes avant.
La sortie de tonalité d'essai n'est reproduite
que par les sorties analogiques de 7,1 canaux.
• Aucun : pour désactiver les enceintes acoustiques.
Français _39
Download from Www.Somanuals.com. All Manuals Search And Download.
options d'affichage
CONFIGURATION DES OPTIONS D’AFFICHAGE ET DE SORTIE VIDÉO
Cette fonction vous permet de configurer les réglages de l’écran de votre
Réglage de langue
Musique
téléviseur. Cette fonction dépend du type de disque ou de téléviseur. Il est
Options Audio
possible qu'elle ne fonctionne pas avec certains types de disque ou de
Param.
Options D'affichage
No Disc
téléviseur.
Configuration HDMI
Config. réseau
1. Arrêtez l’appareil, puis appuyez sur la touche MENU.
Contrôle Parental
2. Appuyez sur les touches ▲▼ pour sélectionner Param.,
puis appuyez sur la touche ENTER ou
►
3. Appuyez sur les touches ▲▼ pour sélectionner Options
D'affichage, puis appuyez sur la touche ENTER ou
Le menu de param vidéo s’affiche.
►.
Réglage de langue
Options Audio
Musique
Options D'affichage
Format écran
:
16:9 Large
Param.
4. Appuyez sur les flèches ▲▼ pour sélectionner l'option
No Disc
Configuration HDMI
Config. réseau
Trame Vidéo (24 Fs)
Résolution
:
:
:
:
Non
d'affichage souhaitée parmi celles présentées aux pages
suivantes.
1080i
Oui
Contrôle Parental
Message écran
Affichage du Panneau
Normale
5. Appuyez sur les flèches ▲▼ pour sélectionner l'élément
souhaité du sous-menu d'une option d'affichage vidéo,
puis appuyez sur la touche ENTER.
Appuyez sur la touche RETURN ou ◄ pour revenir au menu précédent. Appuyez sur la touche MENU pour
quitter le menu.
M
Format d’image du téléviseur
Vous pourriez souhaiter régler l’écran en fonction du type de téléviseur que vous possédez. (Aspect
ratio) (Format de l’image)
• 4:3 Letter Box :
Réglage de langue
À sélectionner si vous souhaitez voir le
Musique
Options Audio
format d’image complet 16:9 fourni par le
4:3 Letter Box
Options D'affichage
Format écran
Param.
No Disc
4:3 Pan-Scan
BD/HD DVD/DVD, même si le format
d’image de votre téléviseur n’est que de
4:3. Des barres noires apparaissent en
haut et en bas de l‘écran.
Configuration HDMI
Config. réseau
Trame Vidéo (24 Fs)
Résolution
:
:
:
16:9 Large
1080i
Contrôle Parental
Message écran
Oui
Affichage du Panneau
Normale
• 4:3 Pan-Scan :
Sélectionnez cette option pour les
téléviseurs de taille conventionnelle lorsque
vous souhaitez voir la partie centrale de
l’écran en 16:9. (Les côtés extrêmes
gauche et droite de l’image sont coupés.)
• 16:9 Large :
l’image 16:9 complète sur votre téléviseur à grand écran.
Certains rapports de format ne sont pas disponibles selon de type de disque que vous utilisez.
M
40_ options d'affichage
Download from Www.Somanuals.com. All Manuals Search And Download.
Trame Vidéo (24Fs)
Les films sont normalement filmés àune cadence de 24
images par seconde. Certains disques Blu-ray/HD DVD ont la
capacité de réaliser la lecture à cettecadence. L’activation
dela fonction Trame Vidéo (24Fs) (Cadence du film (24 i/s))
(ON (Activée)) vous permet de régler la sortie HDMI du lecteur
Duo HD à 24 images par seconde afin d’améliorer la qualité
du film.
Réglage de langue
Options Audio
Musique
Format écran
:
16:9 Large
Param.
Options D'affichage
Trame Vidéo (24 Fs)
Oui
No Disc
Non
1080i
Configuration HDMI
Config. réseau
Résolution
:
:
:
Message écran
Affichage du Panneau
Oui
Contrôle Parental
Normale
Vous pouvez profiter de l'option Trame Vidéo 24Fs (cadence
de défilement de 24 images par seconde) uniquement avec
un téléviseur pouvant accueillir cette cadence de défilement.
Ce menu ne peut être sélectionnéqu'en résolution de sortie HDMI 1080i ou 1080p.
Deux sources peuvent être utilisées en fonction du disque : Média film (24 images) et média vidéo (30
images). L'écran peut clignoter pour quelques secondes lorsque la source passe de média film (24
images) en média vidéo (30 images).
Résolution
Pour régler la résolution de sortie du signal Composantes et
HDMI.
Réglage de langue
Options Audio
Format écran
:
:
16:9 Large
Non
Musique
Trame Vidéo (24 Fs)
Param.
Options D'affichage
Résolution
•
Les nombres 480i, 480p, 720p, 1080p et 1080i indiquent le
nombre de lignes vidéo. Le i et le p indiquent
respectivement le balayage entrelacé et progressif.
1080p
No Disc
1080i
Configuration HDMI
Config. réseau
Message écran
720p
Affichage du Panneau
480p
Contrôle Parental
480i
- 1080p : sortie de 1080 lignes de vidéo à balayage progressif.
- 1080i : sortie de 1080 lignes de vidéo à balayage interlacé.
- 720p : sortie de 720 lignes de vidéo à balayage progressif.
- 480p : sortie de 480 lignes de vidéo à balayage progressif.
- 480i : sortie de 480 lignes de vidéo à balayage interlacé.
Si le téléviseur ne peut pas accueillir la résolution ou le nombre
d'images sélectionné, le message suivant s'affiche :
Réglage de langue
Options Audio
Format écran
:
:
16:9 Large
Non
Musique
Trame Vidéo (24 Fs)
Si aucune image ne s'affiche après la sélection,
veuillez attendre 15 secondes.
1080p
No Disc
Si vous cliquez Oui et que la résolution ne peut pas être
accueillie, l'écran du téléviseur demeure vide.
La ré ti re re ensuite
s
o
l
u
o
n
p
n
d
Oui
automatiquement la valeur précédente.
!
Normale
Souhaitez-vous faire une sélection?
Oui
Non
Si rien n'apparaît à l'écran, appuyez longuement sur la touche $ (plus de 5 secondes – sans disque) sur le
devant du lecteur. Tous les réglages à l'usine sont rétablis. Suivez les étapes à la page précédente pour
accéder à chacun des modes et sélectionnez le paramétrage d'affichage que votre téléviseur peut accueillir.
M
Si les réglages par défaut sont rétablis, toutes les données utilisateur stockées sur le support permanent sont
supprimées.
Si la sortie vidéo HDMI est réglée sur Trame Vidéo (24 fs) (film (24 images/s), la sortie simultanée est
désactivée.
Français _41
Download from Www.Somanuals.com. All Manuals Search And Download.
options d'affichage
❖ Résolution en fonction du mode de sortie (Sortie simultanée par HDMI)
•
Lecture BD/HD DVD :
Sortie
HDMI
Composantes
VIDÉO/S-Vidéo
Réglages
1080p, Trame Vidéo (24Fs) Non
1080p@60F
1080p@24F
1080i
1080i
–
480i
–
1080p/1080i, Trame Vidéo (24Fs) Oui
1080i, Trame Vidéo (24Fs) Non
1080i
720p
480p
480i
480i
480i
480i
480i
720p
480p
480i
720p
480p
480p
•
Lecture DVD
Sortie
HDMI
Composantes
VIDÉO/S-Vidéo
Réglages
1080p
1080i
720p
480p
480i
1080p@60F
1080i
480i
480i
480i
480i
480i
480i
480i
480i
480i
480i
720p
480p
480p
En mode lecture d'un DVD, si les prises HDMI (interface multimédia haute définition) et Component
(composantes) sont toutes deux raccordées et que vous sélectionnez le mode Component (composantes), le
menu Display Setup (configuration de l'écran) affiche la résolution de sortie 1080p. La résolution est en fait
480i.
M
Ce lecteur possède l'option HDMI Auto Detect (Détect. HDMI auto). Dès que le lecteur est raccordé à un
téléviseur par un câble HDMI, sa sortie est automatiquement réglée sur HDMI.
Si la fonction de détection HDMI automatique ne fonctionne pas, il vous est impossible de sélectionner la
résolution 1080p ou Movie (Film). Frame 24Fs (cadence de défilement de 24 images par seconde).
Le disque BD/HD DVD doit posséder l'option de cadence de défilement de 24 images par secondes (24Fs)
pour que vous puissiez utiliser le mode Trame Vidéo 24Fs.
Si les câbles HDMI et composantes sont tous deux branchés sur votre téléviseur, la résolution composantes
peut varier de celle du tableau ci-dessus.
Message écran
•
•
Oui : affiche les messages opérationnels.
Non : n’affiche pas les messages opérationnels.
Affichage du Panneau
•
Automatiq. : l’afficheur demeure noir durant la lecture et s’illumine lorsque l’appareil est en mode
d’arrêt.
•
•
Réduite : sélectionnez pour diminuer la luminosité de l’afficheur.
Normale : sélectionnez pour augmenter la luminosité de l’afficheur.
42_ options d'affichage
Download from Www.Somanuals.com. All Manuals Search And Download.
configuration HDMI
RÉGLAGE DES OPTIONS HDMI
1. Arrêtez l’appareil, puis appuyez sur la touche MENU.
Options Audio
Musique
Options D'affichage
2. Appuyez sur les touches ▲▼ pour sélectionner Param.,
Param.
Configuration HDMI
No Disc
puis appuyez sur la touche ENTER ou
►.
Config. réseau
3. Appuyez sur les touches ▲▼ pour sélectionner
Contrôle Parental
Configuration HDMI, puis appuyez sur la touche ENTER
ou
►.
Le menu de réglage HDMI s'affiche.
4. Appuyez sur les flèches ▲▼ pour sélectionner l'option
d'affichage souhaitée (Anynet ou Format), puis appuyez
sur la touche ENTER ou sur la flèche
►.
Anynet+ (HDMI-CEC)
Lorsque la fonction HDMI est activée, la fonction Anynet+
devient disponible.
Options Audio
Musique
Options D'affichage
Param.
Configuration HDMI
Anynet+ (HDMI-CEC
Oui
•
•
Oui : fonctions Anynet+ disponibles.
Non : fonctions Anynet+ indisponibles.
No Disc
Non
TV
Config. réseau
Format HDMI
Précision
:
:
:
Contrôle Parental
Non
Non
Réduction bruit DVD
Qu’est-ce que Anynet+ ?
Anynet+ est une fonction commode offrant un lien de
fonctionnement avec d’autres produits Samsung dotés de la
fonction Anynet+.
Cet appareil peut être manipulé à l’aide de la télécommande d’un téléviseur Samsung ou peut allumer
un téléviseur et cinéma maison Samsung et lancer la lecture d’un disque simplement en appuyant sur la
touche PLAY (lecture) de la télécommande du téléviseur.
Cette fonctionn’est pas disponible si le câble HDMI ne peut accueillir le format CEC.
M
Pour utiliser Anynet+
1. Raccordez le lecteur Duo HD à un téléviseur Samsung à l’aide d’un câble HDMI. (Voir les pages
20~21)
2. Réglez la fonction Anynet+ (HDMI-CEC) du lecteur Duo HD sur Oui.
3. Réglez la fonction Anynet+ de votre téléviseur. (Voir le manuel d’utilisation du téléviseur pour plus de
détails.)
Les fonction Anynet+
•
Lecture à touche unique
Vous pouvez allumer votre téléviseur et cinéma maison Samsung et lancer la lecture du disque tout
simplement en appuyant sur la touche PLAY (lecture) de la télécommande du téléviseur.
•
Visionnement à touche unique
Sélectionnez « Watching Duo HD player (visionnement du lecteur Duo HD) » ou « Connected to Duo
HD player (connecté au lecteur Duo HD » (selon le menu de votre téléviseur) dans le menu Anynet+ du
téléviseur. Le lecteur Blu-ray s’allume automatiquement et le téléviseur passe en mode HDMI.
•
Lien télécommandé
Vous pouvez manipuler ce lecteur à l’aide de la télécommande de votre téléviseur Samsung.
Français _43
Download from Www.Somanuals.com. All Manuals Search And Download.
configuration HDMI
•
Touches disponibles sur la télécommande des téléviseurs Samsung : ces touches fonctionnent de la
même façon que celles de la télécommande du lecteur.
- Touches de contrôle de la lecture :
ENTER
- Touche de manipulation du menu :
- Touches numériques :
A
B
C
D
- Touches de couleur :
Menu Anynet+ du téléviseur
Si vous appuyez sur la touche Anynet+ de la télécommande
du téléviseur, l’affichage suivant apparaît à l’écran (OSD
(Affichage à l’écran)).
n
Duo HD player
View TV
Select Device
Record
•
Menu du lecteur Duo HD
Menu on Device
Device Operation
- En cours de lecture d’un film : affiche le menu du disque
(semblable à la touche DISC MENU de la télécommande
du lecteur DuoHD.)
Receiver
Setup
: Off
>
e
Move
Exit
s
Enter
- En mode Stop (Arrêt) : affiche le menu SETUP
(CONFIGURATION) (semblable à la touche MENU de la
télécommande du lecteur Duo HD.)
•
Menu de d'exploitation du lecteur Duo HD
-
En cours de lecture d’un disque HD DVD, DVD-VIDEO, DVD-RW/-R, BD-ROM : affiche le menu INFO
OSD (INFO- AFFICHAGEÀ L’ÉCRAN) (semblable à la touche INFO de la télécommande du lecteur.)
Ces menus varient d’un téléviseur Samsung à un autre téléviseur.
M
Format HDMI
Il vous est possible d’optimiser la sortie HDMI pour le
raccordement à un téléviseur ou à un moniteur.
Options Audio
Musique
Options D'affichage
Anynet+ (HDMI-CEC)
:
Oui
Param.
Configuration HDMI
Format HDMI
TV
No Disc
•
TV : sélectionner pour un raccordement HDMI avec un
téléviseur.
Ecran
Non
Config. réseau
Précision
:
:
Contrôle Parental
Réduction bruit DVD
Non
•
Ecran : sélectionner pour un raccordement HDMI avec un
moniteur.
L’option Écran n’est pas disponible si le lecteur est raccordé à
un téléviseur.
Définition
Comment régler le lissage de l'image.
(faible, moyen, élevé)
Options Audio
Anynet+ (HDMI-CEC)
Format HDMI
:
:
Oui
TV
Musique
Param.
Options D'affichage
Configuration HDMI
Précision
Non
No Disc
Faible
Config. réseau
Réduction bruit DVD
Moyen
Contrôle Parental
Elevé
Réduction de bruit du DVD
Cette fonction sert à réduire les parasites à l'écran (Off/Low/
Middle/High) (désactivée/basse/moyenne/haute).
Options Audio
Format HDMI
Précision
:
:
TV
Musique
Param.
Options D'affichage
Non
Configuration HDMI
Réduction bruit DVD
Non
No Disc
Cette fonction n'est pas disponibles sur les disques BD ou HD
DVD.
Faible
Moyen
Elevé
Config. réseau
Contrôle Parental
44_ configuration HDMI
Download from Www.Somanuals.com. All Manuals Search And Download.
contrôle parental
CONFIGURATION DU CONTRÔLE PARENTAL
La fonction Parental Lock (Contrôle parental) est utilisée en conjonction avec les BD/HD DVD/DVD auxquels une
cote a été attribuée, ce qui vous permet de contrôler les types de BD/HD DVD/DVD que votre famille regarde. Vous
pouvez retrouver jusqu’à 8 niveaux de cote sur un disque.
hAZ
1. Arrêtez l’appareil, puis appuyez sur la touche MENU.
Configuration HDMI
Config. réseau
Musique
2. Appuyez sur les touches ▲▼ pour sélectionner Param.,
Param.
Contrôle Parental
No Disc
No Disc
No Disc
No Disc
puis appuyez sur la touche ENTER ou
►
3. Appuyez sur les touches ▲▼ pour sélectionner Contrôle
parental, puis appuyez sur la touche ENTER ou
Config. réseau
Musique
►
La première fois que vous manipulez votre lecteur Duo
HD, le message “Entrer le nouveau Code Secret.”
s’affiche.
Param.
Contrôle Parental
Contrôle Parental
Entrer le nouveau Code Secret.
«
Numéro
²
Revenir
Configuration HDMI
Config. réseau
Musique
4. Saisissez un mot de passe à 4 caractères à l’aide des
touches numériques de la télécommande. Le message
“Confirmer le mot de passe.” s’affiche. Saisissez de
nouveau le mot de passe.
Param.
Contrôle Parental
Contrôle Parental
Confirmer le mot de passe.
«
Numéro
²
Revenir
Configuration HDMI
Config. réseau
5. Appuyez sur la touche ENTER ou
►
pour sélectionner
Musique
Utiliser le Code.
Param.
Contrôle Parental
Utiliser le Code
:
Non
6. Appuyez sur les touches ▲▼ pour sélectionner Oui ou
Niv. Contrôle
Créer le code
:
Niveau1 (enfants)
Non, puis appuyez sur la touche ENTER.
Appuyez sur la touche RETURN ou ◄ pour revenir au menu
précédent. Appuyez sur la touche REMARQUE MENU pour
M
quitter le menu.
Si vous avez oublié votre mot de passe
1. Retirez le disque.
2. Appuyez sur la touche
sur le panneau avant et maintenez-la enfoncée pour 5 secondes ou plus.
•
Tous les réglages retournent aux réglages du manufacturier.
Si les réglages par défaut sont rétablis, toutes les données utilisateur stockées sur le support permanent sont
supprimées.
M
Français _45
Download from Www.Somanuals.com. All Manuals Search And Download.
contrôle parental
Configuration du niveau de cote
1. Appuyez sur les touches ▲▼ pour sélectionner Niv.
Configuration HDMI
Config. réseau
Musique
Utiliser le Code
Niv. Contrôle
Créer le code
:
Non
Contrôle, puis appuyez sur la touche ENTER ou
►.
Contrôle Parental
Ni
veau
(Adulte)
8
Param.
No Disc
Niveau7
Niveau6
Niveau5
Niveau4
Niveau3
Niveau2
Niveau1 (enfants)
Configuration HDMI
Config. réseau
2. Appuyez sur les touches ▲▼ pour sélectionner le niveau
de cote approprié, puis appuyez sur la touche ENTER.
Par exemple, si vous sélectionnez jusqu’au niveau 6, les
disques contenant le niveau 7 ou 8 ne seront pas lus. Un
chiffre élevé indique que le programme est réservé pour
adultes seulement.
Musique
Utiliser le Code
Niv. Contrôle
Créer le code
:
Non
Contrôle Parental
:
Niveau1 (enfants)
Param.
No Disc
Le niveau 1 étant le plus restrictif et le niveau 8 le moins.
Changement de mot de passe
Configuration HDMI
Config. réseau
Utiliser le Code
Niv. Contrôle
:
:
Non
1. Appuyez sur les touches ▲▼ pour sélectionner Créer le
Musique
Niveau1 (enfants)
code, puis appuyez sur la touche ENTER ou
►
Param.
Contrôle Parental
Créer le code
No Disc
No Disc
No Disc
2. Saisissez un mot de passe à 4 caractères à l’aide des
touches numériques de la télécommande. Le message
“Entrer le nouveau Code Secret.” s’affiche.
Configuration HDMI
Config. réseau
Utiliser le Code
Niv. Contrôle
:
:
Non
Musique
Niveau1 (enfants)
Param.
Contrôle Parental
Contrôle Parental
Créer le code
Entrer le nouveau Code Secret.
«
Numéro
²
Revenir
Cnutn HDI
Config. réseau
:
3. Saisissez de nouveau votre mot de passe à l’aide des
Musique
Niv. Contrôle
Niveau1 (enfants)
touches numériques de la télécommande.
Param.
Contrôle Parental
Contrôle Parental
Créer le code
Confirmer le mot de passe.
«
Numéro
²
Revenir
46_ contrôle parental
Download from Www.Somanuals.com. All Manuals Search And Download.
configuration du réseau
Vous pouvez profiter du contenu offert par les producteurs de films ou mettre votre
lecteur à niveau par le biais de l'Internet.
Suivez les étapes ci-après pour vous assurer du meilleur branchement sur l'Internet.
Pour plus de détails sur la configuration, vérifiez la configuration réseau de votre
ordinateur ou contactez votre fournisseur de services Internet.
RÉGLAGE TCP/IP
1. Mettez l’appareil en mode Stop/No Disc (Arrêt/Aucun
Options D'affichage
Configuration HDMI
Musique
Param.
disque), puis appuyez sur la touche MENU.
Config. réseau
TCP/IP
No Disc
2. Appuyez sur les touches ▲▼ pour sélectionner Param.,
Contrôle Parental
Proxy
puis appuyez sur la touche ENTER ou
3. Appuyez sur les touches ▲▼ pour sélectionner Config.
réseau, puis appuyez sur la touche ENTER ou
4. Appuyez sur les touches ▲▼pour sélectionner TCP/IP,
puis appuyez sur la touche ENTER ou
►.
Témoin
:
:
:
Oui
Débit réseau
Serveur NTP
MAC Adresse
Modem(28.8Kbps)
Non
►.
►.
5. Appuyez sur les touches ▲▼pour sélectionner DHCP,
Options D'affichage
Configuration HDMI
Musique
puis appuyez sur la touche ENTER.
TCP/IP
DHCP
Para
:
Oui
000
No Disc
Adresse IP
:
.
.
.
000
.
000
255
000
.
.
.
000
000
000
Masque ss-réseau
:
:
:
:
:
255
000
255
000
.
.
Passerelle
DNS
Oui
Si la fonction DHCP est activée, il est impossible de sélectionner
Adresse IP, Masque sous-réseau ou Passerelle.
M
Automatiq.
Modem(28.8Kbps)
Non
DNS primaire
DNS secondaire
000
000
.
.
000 000
.
.
000
000
000 000
.
.
Enreg
Annuler
Revenir
Si la fonction DNS est réglée sur Automatique, il est impossible de
sélectionner primaire/secondaire DNS (Système de noms de
domaine primaire/secondaire).
Sélect.
²
6. Appuyez sur les touches ▲▼ pour sélectionner l’élément approprié, puis appuyez sur la touche ENTER.
Options D'affichage
•
Si la fonction DHCP (protocole de
configuration hôte dynamique) est
désactivée et que la fonction DNS
(serveur de nom de domaine) est
réglée sur Manual (manuel), saisissez
ce qui suit pour configurer l'adresse IP
(fournisseur d'information), Subnet
Mask (filtre d'adresse locale), Gateway
(passerelle) et Primary DNS ;
Configuration HDMI
Musique
TCP/IP
000
DHCP
Para
:
Non
000
No Disc
No Disc
No Disc
Adresse IP
:
.
.
.
.
000
255
000
.
.
.
000
000
000
Masque ss-réseau
:
:
:
:
:
255
255
000
.
.
Passerelle
DNS
000
Oui
Manuel
Paramétrage possible
DNS primaire
DNS secondaire
000
000
.
.
000
.
000
..000
000
000
.
000
Non
Enreg
Annuler
² Revenir
Sélect.
Options D'affichage
Configuration HDMI
Musique
TCP/IP
Secondary DNS est en option.
000
DHCP
Para
:
Oui
000
Adresse IP
:
.
.
.
.
000
255
000
.
.
.
000
000
000
•
•
Si la fonction DHCP est activée et que
la fonction DNS est réglée sur Manual,
saisissez ce qui suit pour configurer
Primary DNS ; Secondary DNS est en
option.
Masque ss-réseau
:
:
:
:
:
255
255
000
.
.
Paramétrage impossible
Paramétrage possible
Passerelle
DNS
000
Oui
Manuel
DNS primaire
DNS secondaire
000
000
.
.
000
.
000
..000
000
000
.
000
Non
Enreg
Annuler
² Revenir
Sélect.
Configuration HDMI
Musique
TCP/IP
Si la fonction DHCP (protocole de
configuration hôte dynamique) est
activée et que la fonction DNS est
réglée sur Automatic (automatique),
aucune configuration supplémentaire
n'est requise.
000
DHCP
Para
:
Oui
000
Adresse IP
:
.
.
.
.
000
255
000
.
.
.
000
000
000
Masque ss-réseau
:
:
:
:
:
255
000
255
000
.
.
Passerelle
DNS
Oui
Automatiq.
Paramétrage impossible
DNS primaire
DNS secondaire
000
000
.
.
000
.
000
..000
000
000
.
000
Non
Enreg
Annuler
Revenir
Sélect.
²
Français _47
Download from Www.Somanuals.com. All Manuals Search And Download.
configuration du réseau
Pour sélectionner un élément, utilisez les touches numériques et ▲▼◄►
M
7. Une fois l’opération effectuée, utilisez les touches ▲▼ pour sélectionner Enreg, puis appuyez sur
ENTER.
8. Si vous ne souhaitez pas enregistrer votre travail, utilisez les touchese ▲▼◄► pour sélectionner
Annuler, puis appuyez sur ENTER.
L’adresse IP utilisée dans ce manuel n’est qu’à titre d’exemple. Vous devez vous reporter à vos paramètres
réseaux pour définir l'adresse IP réelle.
M
Pour trouver les réglages IP (fournisseur d'information), Subnet Mask (filtre d'adresse locale), Gateway
(passerelle) et Primary DNS (serveur de nom de domaine primaire), vérifiez la configuration réseau de votre
ordinateur.
RÉGLAGE DU SERVEUR MANDATAIRE
Si vous devez configurer le réglage du serveur mandataire, entrez les réglages stipulés par le fournisseur
de services Internet.
Pour configurer, suivez les étapes 1 à 3 du chapitre « Réglages TCP/IP » à la page 47.
4. Appuyez sur les touches ▲▼ pour sélectionner Proxy,
Options D'affichage
Configuration HDMI
TCP/IP
Musique
puis appuyez sur la touche ENTER ou
►.
Proxy
P
Proxy
:
Non
•
Serveur
Port
Util.
No Disc
Serveur
Port
:
Oui
•
•
•
:
:
:
8080
Modem(28.8Kbps)
Non
Util.
Mot de passe
Mot de passe
Enreg
Annuler
s
Sélect.
²
Revenir
Pour plus de détails, contactez votre fournisseur de services Internet.
M
RÉGLAGE DES TÉMOINS INTERNET
Un témoin Internet est un court fichier texte stocké sur votre ordinateur à votre insu pendant que vous
naviguez parmi les sites Web.
Le témoin internet peut contenir des informations telles que le code d'utilisateur, les réglages utilisateur, etc.
Pour configurer, suivez les étapes 1 à 3 du chapitre « Réglages TCP/IP » à la page 47.
4. Appuyez sur les touches ▲▼ pour sélectionner Témoin,
Options D'affichage
Configuration HDMI
TCP/IP
Proxy
puis appuyez sur la touche ENTER ou
►.
Musique
Param.
Config. réseau
Témoin
Oui
•
Oui : Les témoins sont utilisés entre le lecteur et le
serveur de la page Web.
No Disc
Non
Contrôle Parental
Débit réseau
Serveur NTP
MAC Adresse
:
:
Modem(28.8Kbps)
Non
•
Non : Les témoins Internet ne sont pas utilisés. Vous
pouvez perdre certaines des commodités offertes par les
pages Web.
48_ configuration du réseau
Download from Www.Somanuals.com. All Manuals Search And Download.
DÉBIT DU RÉSEAU
Sélectionnez le type de modem Internet branché sur votre lecteur.
Pour configurer, suivez les étapes 1 à 3 du chapitre « Réglages TCP/IP » à la page 47.
4. Appuyez sur les touches ▲▼ pour sélectionner Débit réseau, puis appuyez sur la touche ENTER ou ►.
•
Sortie à débit réseau disponible
- Modem (28,8 k, 33,6 k, 56 kb/s)
Options D'affichage
Configuration HDMI
Proxy
Musique
Param.
Témoin
:
Oui
- ISDN (réseau numérique à intégration de services) (64 kb/s)
- Dual ISDN (réseau numérique à intégration de services double) (128 kb/s)
- DSL/Câble (réseau numérique à intégration de services/câble) (256 kb/s)
- DSL/Câble (réseau numérique à intégration de services/câble) (384 kb/s)
- DSL/Câble (réseau numérique à intégration de services/câble) (768 kb/s)
- T1 (ligne T1) (1,5 Mb/s)
Config. réseau
Débit réseau
Modem(28.8Kbps)
No Disc
Modem(33.6Kbps)
Contrôle Parental
Serveur NTP
MAC Adresse
Modem(56Kbps)
ISDN(64Kbps)
ISDN double(128Kbps)
- LAN (réseau local) (10 Mb/s ou plus)
CONFIGURATION DU SERVEUR NTP
Pour configurer, suivez les étapes 1 à 3 du chapitre «
Réglages TCP/IP » à la page 47.
Options D'affichage
Configuration HDMI
Témoin
:
:
Oui
Musique
Param.
Débit réseau
Modem(28.8Kbps)
Config. réseau
Serveur NTP
MAC Adresse
Oui
No Disc
4. Appuyez sur les touches ▲▼ pour sélectionner Serveur
Non
Contrôle Parental
NTP, puis appuyez sur la touche ENTER ou
►.
•
Oui : Le lecteur se branche automatiquement sur le
serveur Internet pour régler l'horodatage.
•
Non : Le lecteur ne se branche pas sur le serveur
Internet pour régler l'horodatage.
ADRESSE MACINTOSH
Options D'affichage
Configuration HDMI
Débit réseau
Serveur NTP
:
:
Modem(28.8Kbps)
Non
Affiche l'adresse MAC du lecteur. Elle ne peut être changée.
Musique
Param.
Pour configurer, suivez les étapes 1 à 3 du chapitre «
Réglages TCP/IP » à la page 47.
Config. réseau
MAC Adresse
MAC Adresse
No Disc
4. Appuyez sur les touches ▲▼ pour sélectionner MAC
00
:
10
:
18
:
05
:
00
:
b2
Adresse, puis appuyez sur la touche ENTER ou
►.
OK
L'adresse MAC apparaît.
Samsung n'assume aucune responsabilité pour toute défaillance ou mauvais fonctionnement provoqué par un échec de branchement sur
l'Internet ou par une erreur de communication. En outre, Samsung n'assume aucune responsabilité pour un échec de branchement sur
l'Internet de la part de l'usager.
M
Si vous souhaitez utiliser l'Internet sans fil, vous avez besoin d'un adaptateur LAN sans fil. Dans un cas similaire, vous avez besoin d'un
adaptateur LAN sans fil pour votre lecteur Duo HD.
Les accessoires HD DVD qui utilisent votre réseau ne sont pas fabriqués ou fournis par Samsung. Par conséquent, Samsung n'assume
aucune responsabilité quant à la manipulation convenable ou les mises à niveau ultérieures de ces accessoires. Si vous avez des
problèmes ou des questions à ce propos, contactez le fabriquant de disques.
Certains disques demandent un connexion Internet plus rapide.
Même si le lecteur est installé convenablement, la connexion Internet peut ne pas fonctionner convenablement en fonction de la vitesse du
réseau ou des services fournis.
La fonction Internet du lecteur Duo HD est compatible à la norme ¹ 802,3 de l'lEEE (Institute of Electrical and Electronic Engineers).
Les limitations de votre fournisseur de services Internet peuvent restreindre l'accès à certains services Internet.
Vous demeurez seul responsable d'assumer tous les frais de votre connexion à l'Internet.
Pour utiliser convenablement les fonctions Internet du lecteur Duo HD, vous avez besoin d'un port LAN T à la base 10 ou Tx à la base 100. Il est
impossible d'utiliser les fonctions Internet du lecteur sur les services que votre fournisseur de services Internet ne peut pas accueillir ou fournir.
L'accès au service DSL (réseau numérique à intégration de services) nécessite l'utilisation d'un modem DSL. Convenez une entente avec
votre fournisseur de services Internet sur le nombre de dispositifs Internet que vous utilisez simultanément. Selon l'entente, il se pourrait
que vous ne puissiez pas utiliser votre ordinateur et votre lecteur Duo HD simultanément.
Il se pourrait que vous ne puissiez pas utiliser un routeur en fonction des règlements de votre fournisseur de services Internet.
Si vous utilisez un système de raccord DSL, les services réseau du lecteur Duo HD peuvent ne pas être disponibles. (ex. PPPoE)
Français _49
Download from Www.Somanuals.com. All Manuals Search And Download.
gestion du stockage continuel
GESTION DES DISPOSITIFS SYSTÈME
Vous pouvez administrer de telles informations comme répertoire des fournisseurs et du contenu.
Pour configurer, suivez les étapes 1 et 2 du chapitre «
Réglages TCP/IP » à la page 47.
Fus. Hor.
Param.Horloge
Musique
Param.
Système
Gestion stockage durable
Dém. m. à niv.
No Disc
3. Appuyez sur les touches ▲▼ pour sélectionner Système,
Réglage de langue
Options Audio
puis appuyez sur ENTER ou sur la touche ►.
Disque format Twin
:
HD DVD
Options D'affichage
Configuration HDMI
Config. réseau
4. Appuyez sur les touches ▲▼ pour sélectionner Gestion
stockage durable, puis appuyez sur ENTER ou sur la
touche ►.
Contrôle Parental
5. Appuyez sur les touches ▼▲ pour vous déplacer sur le
sous-répertoire, puis appuyez sur ENTER ou sur la touche
►.
Gestion stockage durable
Sélect Périphérique
flash
- Comment supprimer un répertoire -
Utilisez les touches ▲▼ pour sélectionner le fichier à
supprimer, puis appuyez sur la touche BLEU (D).
(Il est impossible de supprimer des dispositifs.)
Description de la rubrique Device Information (renseignements sur le dispositif)
•
Category (catégorie) : indique si le dispositif est intégré ou
à connexion à chaud.
- Required (requis) : dispositif intégré
Slot Status (état de la fente) : indique le type de fente
actuelle du dispositif.
- Non Slot (aucune fente) : dispositif qui ne peut pas
accueillir la connexion à chaud.
Device Name (nom de dispositif) : nom du dispositif
Total Size (taille totale) : taille totale du dispositif
Available Size (tailles disponibles) : taille du dispositif
disponible
Nom du menu
Renseignements
sur l'appareil
Surbrillance
Gestion stockage durable
•
Sélect Périphérique
Sony Pictures
Porvider ID Name 1
Common
Unknown Provider Area
Unknown Directory
• Taille totale
130(MB)
• Taille disponible
130(MB)
• Débit lect. moyen
100(Mbps)
•
•
•
a
Device
d
Supprimer
•
Average Read Rate (vitesse de lecture moyenne) : vitesse
moyenne de lecture de données du dispositif (selon ses
spécifications)
Liste des
fournisseurs
Zone d'aide
Barre de
défilement
Dans la plupart des cas, le répertoire des fournisseurs contient des fichiers reliés à chaque producteur de film
et le répertoire des contenus stocke les fichiers reliés à chaque titre. (Ces répertoires comportent des fichiers
de renseignement sur les signets créés lors de la lecture d'un film ou du téléchargement de fichiers par le
biais du réseau)
M
Tous les fichiers des répertoires ne sont pas visibles.
Si vous supprimez ce répertoire, tous ses fichiers sont supprimés par le fait.
Appuyez sur la touche ROUGE (A) du répertoire des fournisseurs pour vous déplacer sur le répertoire parent «
Device (dispositif) ».
Appuyez sur la touche VERTE (B) du répertoire des contenus pour vous déplacer sur le répertoire parent «
Provider (fournisseurs) ».
Habituellement, les renseignements sur le dispositif actuel (nom, utilisation d'espace, vitesse de transfert de
données) apparaissent à la droite de la liste des répertoires ou des contenus.
Le producteur du film peut intentionnellement afficher une image plutôt que le nom du répertoire selon son gré.
50_ gestion du stockage continuel
Download from Www.Somanuals.com. All Manuals Search And Download.
mise à niveau du système
Samsung offre parfois des mises à niveau pour le micrologiciel du lecteur Duo HD du futur. Pour mettre ce
micrologiciel à niveau, vous devez :
1. Consulter le site samsung.com et reportez-vous à la page « SUPPORT » pour télécharger le micrologiciel et
gravez un CD de mise à niveau.
ou
2. Raccorder le terminal RLE du lecteur au terminal RLE de votre modem (voir à la page 30) et suivez les étapes
suivantes.
MISE À NIVEAU DU MICROLOGICIEL
1. Mettez l’appareil en mode No Disc (aucun disque), puis appuyez
Musique
sur la touche MENU.
Système
Param.
No Disc
No Disc
No Disc
No Disc
No Disc
2. Appuyez sur les touches ▲▼ pour sélectionner Param., puis
appuyez sur la touche ENTER ou
3. Appuyez sur les touches ▲▼ pour sélectionner Système, puis
appuyez sur la touche ENTER ou
Réglage de langue
Options Audio
►
Options D'affichage
Configuration HDMI
Config. réseau
Contrôle Parental
►.
Musique
Gestion stockage durable
Système
Dém. m.
à
niv.
Param.
4. Appuyez sur les touches ▲▼pour sélectionner Dém. m. à niv.,
puis appuyez sur la touche ENTER ou
Réglage de langue
Options Audio
Disque format Twin
:
HD DVD
►.
Options D'affichage
Configuration HDMI
Config. réseau
Contrôle Parental
Param.Horloge
Gestion stockage durable
Musique
5. Une fenêtre apparaît vous permettant de vérifier l’état du câble
Système
Dém. m. à niv.
Dém. m.
1
à
niv.
2
Param.
3
4
5
HD DVD
ou de la connexion réseau.
Vérif. en cours.
Veuillez patienter.
Config. réseau
Contrôle Parental
Param.Horloge
Gestion stockage durable
Musique
Si une mise à niveau est disponible : des renseignements
concernant la version actuelle ou les nouvelles versions
s’affiche dans la boîte de message.
Système
Dém. m. à niv.
Dém. m.
1
à
niv.
2
Param.
3
4
5
j. trouvées
HD DVD
Nouv. données de m.
à
Version actuelle
:
XXXXX
XXXXX
Nouvelle version
:
Démar.
Annuler
Config. réseau
Contrôle Parental
Si une mise à niveau n’est pas disponible: ladescription
suivante s'affiche dans la boîte de message.
Param.Horloge
Musique
Gestion stockage durable
•
•
•
Si le câble n'est pas branché, la connexion au réseau
échouera : "Connex. du syst. à internet impos. pr m. à n.
Vérifiez la configuration réseau."
Si aucune version ultérieure n’est disponible (la dernière
version est déjà installée) : "Dern.vers.dumicrolo.princ.déjà
installée Mise à jour inutile"
Système
Dém. m. à niv.
Dém. m.
1
à
niv.
2
Param.
3
4
5
HD DVD
Connex. du syst.
à
internet impos. pr m. n.
à
Vérifiez la configuration réseau.
OK
Config. réseau
Contrôle Parental
Si un disque est présent dans le lecteur :
"Veuillez conserver l'état "Aucun disque" pour la mise à jour du réseau."
Ceci indique que vous devez retirer tous les disques de l'appareil avant d'effectuer la mise à
niveau.
Français _51
Download from Www.Somanuals.com. All Manuals Search And Download.
mise à niveau du système
Param.Horloge
6. Pour effectuer la mise à niveau du système, appuyez sur les
Musique
Gestion stockage durable
touches ◄► pour sélectionner Démar., puis appuyez sur
Dém. m. à niv.
3
Para
1
2
4
5
No Disc
No Disc
No Disc
sc
ENTER.
Nouv. données de m.
Version actuelle
Nouvelle version
à
j. trouvées.
:
HD DVD
:
XXXXX
:
XXXXX
Démar.
Cngain HI
Annuler
Config. réseau
Contrôle Parental
7. La mise à niveau du système est lancée.
Param.Horloge
Musique
Gestion stockage durable
3
Para
Dém. m. à niv.
1
2
4
5
Téléch. données de m.
à
j. en cours
:
HD DVD
Veuillez ne pas éteindre l'appareil.
60%
Annuler
Cngain HI
Config. réseau
Contrôle Parental
Param.Horloge
Gestion stockage durable
8. Si vous sélectionnez Cancel (annuler) en cours de
téléchargement, une boîte de message vous invite à confirmer
votre choix.
Musique
Système
Dém. m.
à
niv.
Param.
Dém. m. à niv.
1
2
3
4
5
:
HD DVD
Annuler l'opération de m.
à
jour?
Si vous souhaitez annuler le téléchargement, sélectionnez Oui
et appuyez sur ENTER.
Oui
Non
Config. réseau
Contrôle Parental
Param.Horloge
Param.Horloge
Gestion stockage durable
9. La vérification s'effectue.
Musique
Musique
Gestion stockage durable
Lorsque terminé, la mise
à niveau du micrologiciel
est lancée
Para
Dém. m. à niv.
Système
Dém. m.
à
niv.
Param.
1
2
3
4
5
No Disc
Dém. m. à niv.
1
2
3
4
5
Vérif. des données de mise
à
jour.
:
HD DVD
:
HD DVD
Mise jour du micrologiciel.
à
Veuillez patienter.
Traitement en cours...
Veuillez ne pas éteindre l'appareil.
onguraion MI
Config. réseau
automatiquement.
Config. réseau
Contrôle Parental
Contrôle Parental
Param.Horloge
Gestion stockage durable
Musique
Système
Dém. m.
à
niv.
Param.
No Disc
Dém. m. à niv.
mise jour terminée.
1
2
3
4
5
:
HD DVD
10. Lorsque l’installation est terminée, le message « mise à jour
terminée » s’affiche. Le lecteur s’éteint automatiquement
après 3secondes. Tous les réglages récupèrent les réglages à
l’usine. Au prochain démarrage du système, le menu de
sélection de la langue s’affiche.
à
Config. réseau
Contrôle Parental
Si vous souhaitez annuler la mise à niveau en cours de téléchargement des données, appuyez sur la touche
ENTER. Un message de confirmation s’affiche.Si vous sélectionnez Oui, le processus de mise à niveau
s’interrompt ; si vous sélectionnez Non, les étapes de vérification se continuent.
M
Lorsque la mise à niveau du système est terminée, vérifiez les détails concernant le micrologiciel dans le menu
Mise à niv. du système.
N’ÉTEIGNEZ PAS le lecteur en cours de mise à niveau du système. Dans le cas contraire, il se pourrait que le lecteur
fonctionne incorrectement.
52_ mise à niveau du système
Download from Www.Somanuals.com. All Manuals Search And Download.
INFORMATION SYSTÈME
Lorsque la mise à niveau du micrologiciel est terminée, vérifiez les détails concernant le mic rologiciel en suivant les
étapes plus bas.
1. Arrêtez l’appareil, puis appuyez sur la touche MENU.
Musique
2. Appuyez sur les touches ▲▼pour sélectionner Param.,
Param.
Système
No Disc
No Disc
No Disc
puis appuyez sur la touche ENTER ou
3. Appuyez sur les touches ▲▼ pour sélectionner Système,
puis appuyez sur la touche ENTER ou
►.
Réglage de langue
Options Audio
Options D'affichage
Configuration HDMI
Config. réseau
►.
Contrôle Parental
4. Appuyez sur les touches ▲▼ pour sélectionner
Information système, puis appuyez sur la touche ENTER
ou
►.
Musique
Les détails complets concernant le micrologiciel actuel
s’affichent.
Système
Information système
Param.
Réglage de langue
Options Audio
Fus. Hor.
Param.Horloge
Gestion stockage durable
Dém. m. à niv.
Options D'affichage
Configuration HDMI
Config. réseau
Disque format Twin
:
HD DVD
Contrôle Parental
5. Appuyez sur la touche ENTER pour sélectionner OK.
Le menu Système s’affiche.
Musique
Système
Information système
Information système
Param.
S/W : XXXXXX_XXX
Region : A/1 (BD/DVD)
le
OK
Config. réseau
Disque format Twin
:
HD DVD
Contrôle Parental
Français _53
Download from Www.Somanuals.com. All Manuals Search And Download.
visionner un film
UTILISATION DE LA FONCTION AFFICHEUR
hAZCV
1. Appuyez sur la touche INFO de la télécommande en cours de
BD
Info
lecture.
Titre
: 001/006
: 001/016
Chapitre
2. Appuyez sur les touches ▲▼ pour sélectionner l’élément
Durée de lect. : 00:04:17
Audio
: ENG 5.1CH
: Non
approprié.
Sous-titre
Angle
: 01/01
§
Chang.
Sélect.
3. Appuyez sur la touche ◄► pour effectuer la configuration
appropriée, puis appuyez sur la touche ENTER.
•
Les touches numériques de la télécommande vous
permettent un accès direct à un titre, un chapitre ou
vous permettent de lancer la lecture à l’heure souhaitée.
4. Pour que l’écran disparaisse, appuyez de nouveau sur la touche INFO.
En certains cas, si vous lisez le contenu du menu Info, la lecture peut ne pas fonctionner correctement en
fonction du titre.
M
Titre : pour sélectionner le titre souhaité lorsque le disque en contient plusieurs. Si un BD/HD DVD/DVD
contient plus d’un film par exemple, chaque film est identifié par un Titre.
Chapitre : la plupart des BD/HD DVD/DVD sont enregistrés en chapitres pour que vous puissiez trouver
rapidement un passage spécifique.
Durée de lecture : permet de lancer la lecture du film à l’heure souhaitée. Vous devez entrer l’heure de début
en tant que référence. La fonction de recherche de l’heure ne fonctionne pas avec certains disques.
Audio : s’adresse à la langue de la trame sonore du film. Un disque BD peut contenir jusqu’à 32 langues et un
HD DVD/DVD jusqu’à 8.
Sous-titrage : s’adresse aux langues de sous-titrage disponibles sur le disque. Vous pouvez choisir la langue
de sous-titrage ou, si vous préférez, désactiver le sous-titrage. Un disque BD peut contenir jusqu’à 255
langues de sous-titrage et un HD DVD/DVD jusqu’à 32.
Angle : lorsqu’un BD/HD DVD/DVD contient plusieurs angles pour une scène donnée, vous pouvez utiliser la
fonction ANGLE.
A
Utilisation des touches de couleur (A, B, C, D)
Utilisez-les à l'écran en cours de lecture d'un disque HD DVD.
La fonction de chaque bouton peut varier en fonction du contenu
du disque.
Utilisez-les si vous souhaitez utiliser les fonctions accueillies par le
contenu du disque.
54_ visionner un film
Download from Www.Somanuals.com. All Manuals Search And Download.
UTILISATION DE MENUS DU DISQUE & CONTEXTUEL / TITRE MENU
hAZ
Utilisation de Menu disque
1. Appuyez sur la touche DISC MENU de la télécommande
PLAY MOVIE
LANGUAGES
SCENE SELECTIONS
PREVIEWS
en cours de lecture.
2. Appuyez sur les touches ▲▼◄► pour effectuer la
configuration appropriée, puis appuyez sur la touche
ENTER.
►
ou
•
Les éléments de configuration du menu disque peuvent
varier d’un disque à l’autre.
▼
3
4
5
6
7
8
9
10 11
12 13
14 15
En fonction du disque, le menu disque peut ne pas fonctionner.
M
Vous pouvez utiliser plusieurs options de menu offertes par votre BD/HD DVD et de différentes façons en
fonction du type de disque. (ex. : les touches de direction)
AZ
Utilisation de Menu titre
1. Appuyez sur la touche TITLE MENU de la télécommande en cours de lecture.
2. Appuyez sur les touches▲▼◄► pour effectuer la configuration appropriée, puis appuyez sur la
touche ENTER.
•
Les éléments de configuration du menu titre peuvent varier d’un disque à l’autre.
En fonction du disque, le menu titre peut ne pas fonctionner.
M
Le menu titre ne s’affiche que si le disque contient au moins deux titres.
h
Utilisation Menu contextuel
1. Appuyez sur la touche POPUP MENU de la
MAIN MENU
SUBTITLES
SCENE SELECTIONS
télécommande en cours de lecture.
2. Appuyez sur les touches ▲▼◄► ou ENTER pour
sélectionner le menu approprié.
•
Les éléments de configuration du menu contextuel
peuvent varier d’un disque à l’autre.
▼
3
4
5
6
7
8
9
10 11
12 13
14 15
En fonction du disque, le menu contextuel peut ne pas fonctionner.
M
Français _55
Download from Www.Somanuals.com. All Manuals Search And Download.
visionner un film
LECTURE EN BOUCLE (RÉPÉTITION)
Effectue la lecture en boucle du chapitre ou du titre actuel.
hZCV
Lecture en boucle
1. Appuyez sur la touche REPEAT de la télécommande en
Répétition
Non
cours de lecture. L’écran de lecture en boucle apparaît.
2. Appuyez sur les touches ▲▼ pour sélectionner le
chapitre ou le titre approprié.
•
Le BD/HD DVD/DVD effectue la lecture en boucle par
chapitre ou par titre.
3. Pour revenir en lecture normale, appuyez de nouveau sur la touche REPEAT, puis appuyez sur les
touches ▲▼ pour sélectionner Non.
En fonction du disque, la fonction de lecture en boucle peut ne pas fonctionner.
M
Il se peut que la fonction Repeat (répéter) ne fonctionne pas convenablement en fonction du type de disque
HD DVD.
hZCV
Utilisation de la fonction Répéter A-B
1. Appuyez sur la touche REPEAT A-B de la télécommande en cours de lecture.
2. Appuyez sur la touche REPEAT A-B à l’endroit où vous souhaitez que la lecture en boucle démarre
(A).
3. Appuyez sur la touche REPEAT A-B à l’endroit où vous souhaitez que la lecture répétée s’arrête (B).
4. Pour repasser en lecture normale, appuyez sur la touche CANCEL.
Le point B ne peut être réglé que lorsque 5 secondes de lectures ont été effectuées depuis le point A.
M
ZB
REPRISE DE LECTURE
Cette fonction vous permet de reprendre la lecture du disque à partir du dernier point d'arrêt.
Si vous appuyez sur la touche d'arrêt en cours de lecture et que vous appuyez ensuite sur la touche
RESUME PLAY (REPRISE DE LECTURE), le lecteur reprend la lecture à partir du dernier point d'arrêt.
Si vous appuyez à nouveau sur la touche d'arrêt en cours de lecture, la fonction de reprise de lecture
est désactivée.
Vous pouvez modifier les réglages à partir du menu de configuration pendant que le lecteur stocke les
informations de l'emplacement sur la mémoire. Toutefois, ces modifications ne seront pas apportées avant la
désactivation de la fonction de reprise de lecture.
M
Il est impossible d'activer cette fonction en fonction du contenu du disque ou de la scène.
56_ visionner un film
Download from Www.Somanuals.com. All Manuals Search And Download.
hAZ
SÉLECTION DE LANGUE AUDIO
Vous pouvez sélectionner rapidement et facilement la langue appropriée à l’aide de la touche AUDIO.
Utilisation de la touche AUDIO
1. Appuyez sur la touche AUDIO en cours de lecture. La
Audio
ENG Dolby Digital Plus 5.1CH
langue change à chaque fois que vous appuyez sur la
touche.
•
Les langues sont indiquées par leur abréviation.
2. Pour enlever l’icône AUDIO, appuyez sur la touche CANCEL ou RETURN.
Utilisation de la touche INFO
1. Appuyez sur la touche INFO de la télécommande en cours de lecture.
2. Appuyez sur les touches ▲▼ pour sélectionner langue audio.
3. Appuyez sur les touches ◄►de la télécommande pour sélectionner la langue appropriée.
Cette fonction varie en fonction des langues encodées sur le disque et peut ne pas être disponible.
M
Un disque BD peut contenir jusqu’à 32 langues et un HD DVD/DVD jusqu’à 8.
Selon le type de disque, vous pouvez utiliser la touche Audio pourchanger de trame sonore ainsi que la langue
de lecture.
Certains disques Blu-ray/HD DVD vous permettent de sélectionner soit la trame sonore LPCM (modulation par
impulsion et codage linéaire) multi-canaux ou Dolby numérique des trames sonores en anglais.
Français _57
Download from Www.Somanuals.com. All Manuals Search And Download.
visionner un film
SÉLECTIONNER LA LANGUE DE SOUS-TITRE
Vous pouvez sélectionner rapidement et facilement la langue de sous-titrage appropriée à l’aide de la touche
SUBTITLE.
hAZ
Utilisation de la touche SUBTITLE
1. Appuyez sur la touche SUBTITLE. La langue de sous-
titrage change à chaque fois que vous appuyez sur la
touche. Les langues de sous-titrage sont indiquées par
leur abréviation.
Sous-titre
ENG
2. Pour enlever l’icône SUBTITLE, appuyez sur la touche CANCEL ou RETURN.
Utilisation de la touche INFO
1. Appuyez sur la touche INFO de la télécommande en cours de lecture.
2. Appuyez sur les touches ▲▼ pour sélectionner Sous-titre.
3. Appuyez sur les touches ◄►de la télécommande pour sélectionner la langue de sous-titrage
appropriée.
Selon le type de BD/HD DVD/DVD, vous pourriez avoir à modifier la langue de sous-titrage souhaitée dans le
menu du disque. Appuyez sur la touche DISC MENU.
M
Cette fonction varie en fonction des langues de sous-titrage encodées sur le disque et peut ne pas fonctionner
avec tous les BD/HD DVD/DVD
Un disque BD peut contenir jusqu’à 255 langues de sous-titr age et un HD DVD/DVD jusqu’à 32.
58_ visionner un film
Download from Www.Somanuals.com. All Manuals Search And Download.
CHANGEMENT DE L’ANGLE DE CAMÉRA
Lorsqu’un BD/HD DVD/DVD contient plusieurs angles pour une scène donnée, vous pouvez utiliser la fonction
ANGLE.
hAZ
Utilisation de la fonction ANGLE
1. Appuyez sur la touche INFO de la télécommande en cours de
lecture.
BD
Info
Titre
: 001/006
: 003/016
2. Appuyez sur les touches
pour sélectionner Angle.
▲▼
Chapitre
Durée de lect. : 00:11:14
Audio
: ENG 5.1CH
: ENG
Sous-titre
Angle
: 01/01
§
Chang.
¨
Dépla.
3. Appuyez sur les touches ◄►ou utilisez les touches numériques de la télécommande
poursélectionner l’angle approprié.
Cette caractéristique ne fonctionne pas si le disque ne possède qu’un angle unique. Présentement, très peu de
disques possèdent cette caractéristique.
M
En fonction du disque, ces fonctions peuvent ne pas fonctionner.
A
COMMENT UTILISER LA FONCTION CURSOR (CURSEUR)
Certains disque HD DVD ne peuvent pas accueillir la fonction du curseur vous permettant de déplacer ce dernier
dans 8 directions différentes.
1. Appuyez sur la touche Cursor (curseur) avec un disque pouvant accueillir cette fonction.
2. Déplacez le curseur à l'aide des 8 flèches de direction.
3. En fonction du type de disque, l'opération de la touche curseur vous permet de profiter de plusieurs
autres fonctions.
Pour plus de détails sur la fonction curseur, reportez-vous au manuel de l'utilisateur du disque.
Français _59
Download from Www.Somanuals.com. All Manuals Search And Download.
écouter de la musique
B
LECTURE D’UN CD AUDIO (CD-DA)
1. Insérez un CD audio (CD-DA) dans le tiroir disque.
TRACK 001
01/12
CD
►
00:01:29 / 00:04:06
CD audio – la première piste est lue automatiquement.
2. Pour vous déplacer vers la liste de fichiers musicaux,
appuyez sur la touche STOP ou RETURN.
L’écran Liste de fichiers musicaux s’affiche.
a
Mode Lecture
3. Appuyez sur les touches ▲▼ pour sélectionner la piste
Vidéo
TRACK 005
TRACK 006
00:03:20
00:03:20
appropriée, puis appuyez sur ENTER.
Musique
CD
TRACK 007
TRACK 008
TRACK 009
TRACK 010
TRACK 011
TRACK 012
00:03:32
00:04:36
00:04:17
00:04:11
00:04:07
00:04:46
Param.
b
Liste de lecture
ÉLÉMENTS DE L’ÉCRAN CD AUDIO(CD-DA)
<Audio CD(CD-DA)>
Affiche le type de média.
Piste actuelle (chanson)
TRACK 001
01/12
CD Audio (CD-DA) : affiche le numéro de la piste en
cours de lecture.
CD
►
00:01:29
/
00:04:06
Barre d'état de lecture.
Affiche l’index de lecture et le nombre total de pistes.
Actuel/durée totale de la lecture.
a
Mode Lecture
Affiche les touches de COULEUR disponibles.
(voir l'utilisation des touches de couleur à la page suivante).
60_ écouter de la musique
Download from Www.Somanuals.com. All Manuals Search And Download.
LES TOUCHES DE LA TÉLÉCOMMANDE UTILISÉES POUR LA
LECTURE DE DISQUES CD AUDIO (CD-DA)
1. Touche SAUT ( ) : pour lire la piste suivante en mode de
lecture. pour vous déplacer page par page dans la Liste de
fichiers musicaux ou dans la Liste de lecture.
2. Touche LECTURE / PAUSE ( ) : effectue la lecture de la piste
sélectionnée. Appuyez en cours de lecture pour arrêter
momentanément la lecture de la piste actuelle.
3. Flèches ▲▼ : Pour sélectionner une piste (chanson) de la Liste
des fichiers musicaux ou de la Liste de lecture.
4. Touches COULEUR : ROUGE (A), VERTE (B), JAUNE (C)
•
•
•
Touche ROUGE (A) : pour sélectionner le mode Répéter en
cours de lecture.
Touche VERTE (B) : pour passer de la liste de fichiers
musicaux à la liste de lecture ou vice versa.
Touche JAUNE (C) : pour lire la Liste de lecture.
5. Flèches ◄►
►
◄
: Lit la piste appropriée en fonction de sa position actuelle.
: Vous déplace sur le menu.
6. Touche ENTER : effectue la lecture de la piste sélectionnée
(chanson)
7. Touche ARRÊT ( ) : arrête la lecture de la piste (chanson).
8. Appuyez sur les touches RECHERCHE (
) : Lecture rapide (CD Audio(CD-DA) uniquement)
9. Touche SAUTER ( ) : un appui en cours de lecture vous ramène au début de la piste actuelle. Si vous appuyez de
nouveau, le lecteur Duo HD revient à la piste précédente et en effectue la lecture. Si vous appuyez sur cette touche à
l’intérieur de 3 secondes après le lancement de la lecture, la piste précédente sera lue. Si vous appuyez sur cette touche
après 3 secondes, la piste actuelle est relancée depuis le début.
Pour vous déplacer page par page dans la Liste de fichiers musicaux ou dans laListe de lecture.
LECTURE EN BOUCLE CD AUDIO(CD-DA)
Appuyez sur la touche REPEAT ou ROUGE (A) en cours de lecture pour sélectionner le mode approprié.
Normale
•
•
•
•
Normale : les pistes d’un disque sont lues en ordre d’enregistrement.
Répéter la piste
Répéter le dossier
Aléatoire
l’option aléatoire effectue la lecture d’une piste au hasard.
Répéter tout : Toutes les pistes sont lues en boucle.
•
- Pour reprendre la lecture normale -
Appuyez plusieurs fois sur la touche REPEAT ou ROUGE (A) pour reprendre la lecture normale.
Français _61
Download from Www.Somanuals.com. All Manuals Search And Download.
écouter de la musique
Liste de lecture
Permet de créer une liste de lecture contenant jusqu’à 99 pistes.
Pour configurer, suivez les étapes 1 et 2 à la page 60.
Vidéo
TRACK 006
TRACK 007
00:03:20
00:03:32
1. Appuyez sur la touche VERTE (B).
Musique
CD
CD
CD
TRACK 008
TRACK 009
TRACK 010
TRACK 011
TRACK 012
00:04:36
00:04:17
00:04:11
00:04:07
00:04:46
Param.
b
Liste de lecture
Original
Liste de lecture
Vidéo
2. Appuyez sur les touches ▲▼ pour sélectionner une piste,
puis appuyez sur la touche ENTER pour l’ajouter à la Liste
de lecture. Répétez cette procédure pour ajouter des
pistes.
Musique
Param.
TRACK 001
TRACK 002
TRACK 003
TRACK 004
TRACK 005
TRACK 006
TRACK 007
TRACK 008
b
Liste musicale
c
Liste de lecture Lecture
Ajout.
Original
Liste de lecture
Vidéo
TRACK 005
TRACK 006
3. Si une piste non appropriée se retrouve sur la liste de
lecture, appuyez sur la touche ►▲▼ pour la sélectionner,
puis appuyez sur la touche ENTER.
01.TRACK 002
Musique
Param.
02.TRACK 003
03.TRACK 004
04.TRACK 006
TRACK 007
TRACK 008
TRACK 009
TRACK 010
TRACK 011
TRACK 012
•
La piste sélectionnée s’efface.
b
Liste musicale
c
Liste de lecture Lecture
Ajout.
Original
Liste de lecture
4. Appuyez sur la touche JAUNE (C) pour lire les pistes
sélectionnées. Lorsque la lecture d’une piste est terminée,
l’autre débute automatiquement.
Vidéo
TRACK 005
TRACK 006
Musique
Param.
01.TRACK 002
CD
TRACK 007
TRACK 008
TRACK 009
TRACK 010
TRACK 011
TRACK 012
02.TRACK 003
03.TRACK 004
04.TRACK 006
b
Liste musicale
c
Liste de lecture Lecture
Supprimer
TRACK 002
01/04
CD
►
00:00:05 / 00:05:02
5. To edit the Playlist, press the STOP or RETURN button.
6. To go to the Music List, press the Green(B) or RETURN
button.
62_ écouter de la musique
Download from Www.Somanuals.com. All Manuals Search And Download.
dépannage
Avant de contacter le centre de service technique, effectuez les vérifications élémentaires suivantes :
Problème
Solution
La télécommande ne fonctionne pas.
• Vérifiez les piles dans la télécommande. Il peut s’avérer nécessaire de les
remplacer.
• Utilisez la télécommande à une distance inférieure à 6 mètres (20 pi).
• Retirez les piles et maintenez enfoncée(s) une ou plusieurs touches
pendant plusieurs minutes pour purger le microprocesseur à l’intérieur de
la télécommande et le réinitialiser. Réinstallez les piles et essayez d’utiliser
de nouveau la télécommande.
Le disque n'est pas lu.
• Assurez-vous que le disque est bien installé, côté étiquette vers le haut.
• Vérifiez le code régional du BD/HD DVD/ DVD.
Le son 7,1 canaux n’est pas reproduit.
• Le son 7,1 canaux est reproduit uniquement lorsque les conditions
suivantes sont remplies :
1. Le lecteur Duo HD est raccordé à l’amplificateur approprié.
2. Le disque est enregistré en mode de son 7,1 canaux.
• Vérifiez si le disque qui est en cours de lecture comporte l'indication
“Dolby 7.1 ch”.
• Vérifiez si votre système audio est adéquatement raccordé et qu’il
fonctionne correctement.
• Menu CONFIGURATION – est-ce que la sortie audio est réglée à Bitstream
(Train de bits) ?
La fonction Disc Menu (Menu disque)
n’apparaît pas.
• Vérifiez si le disque a un menu.
L’icône apparaît à l’écran.
• Les fonctions ou les actions ne peuvent pas être exécutées à ce moment car :
1. Le logiciel du BD/HD DVD/ DVD l’interdit.
2. Le logiciel du BD/HD DVD/ DVD ne peut accueillir la fonction (ex. : les
angles).
3. La fonction n’est pas disponible pour le moment.
4. Vous avez demandé un numéro de titre ou de chapitre ou une heure de
recherche hors limites.
Le mode de lecture diffère de la
sélection du Setup Menu (Menu de
configuration).
• Certaines fonctions sélectionnées dans le menu de configuration peuvent
ne pas fonctionner adéquatement si le disque n’est pas encodé avec la
fonction correspondante.
Le format de l’écran ne peut pas être
modifié.
• Le format de l’écran est fixe sur vos BD/HD DVD/ DVD.
Français _63
Download from Www.Somanuals.com. All Manuals Search And Download.
Problème
Solution
Aucun son.
• Assurez-vous d’avoir sélectionné la sortie numérique appropriée dans le
menu Audio Setup (Configuration audio).
L’écran est bloqué
• Retirez le disque et appuyez sur la touche
(sur le panneau avant)
pendant plus de 5 secondes. Tous les réglages retournent aux réglages
du manufacturier.
Si la sortie HDMI est définie sur une
résolution que votre téléviseur ne peut
accueillir (ex. : 1080p), il se peut que
l'image n'apparaisse pas à l'écran.
• Retirez le disque et appuyez sur la touche
pendant plus de 5 secondes. Tous les réglages retournent aux réglages
du manufacturier.
(sur le panneau avant)
Mot de passe oublié.
• Retirez le disque et appuyez sur la touche
(sur le panneau avant)
pendant plus de 5 secondes. Tous les réglages, incluant le mot de passe,
retournent aux réglages du manufacturier. Ne pas utiliser sauf si
absolument nécessaire.
Si vous rencontrez d’autres difficultés.
• Reportez-vous à la table des matières et trouvez la section du manuel
d’instruction qui donne les explications relatives au problème actuel et
suivez de nouveau la procédure.
• Si le problème persiste, contactez le centre de service technique agréé le
plus près de chez-vous.
L’image est déformée et bruitée
(parasites)
• Assurez-vous que le disque n’est pas sale ou égratigné.
• Nettoyez le disque.
Aucune sortie HDMI.
• Vérifiez le raccordement entre le téléviseur et la prise HDMI du lecteur Duo
HD.
• Vérifiez si votre téléviseur peut accueillir les résolutions d’entrée HDMI
480p / 720p / 1080i / 1080p.
Sortie d’écran HDMI anormale.
• Si le téléviseur n’accueille pas le mode HDCP (High-bandwidth Digital
Content Protection) (Protection du contenu numérique à large bande
passante), des parasites peuvent apparaître à l’écran.
Si les réglages par défaut sont rétablis, toutes les données utilisateur stockées sur le support permanent sont
supprimées.
M
64_ dépannage
Download from Www.Somanuals.com. All Manuals Search And Download.
appendice
CARACTÉRISTIQUES TECHNIQUES
Alimentation
CA 120V, 60Hz
Consommation électrique
Poids
42 W
9,3 Ibs
Général
Dimensions
16,9 (L) x 12,8 (P) x 3,1 (H) po : 42,97 (L) X 32, 51 (P) X 7,87 (H) cm
De + 41° F à + 95° F
Plage de températures de fonctionnement
Plage d’humidité de fonctionnement
BD (disques BD/HD DVD)
HD DVD
De 10 % à 75 %
Vitesse de lecture : 4,917 m/s
Vitesse de lecture : 6.61 m/s
Vitesse de lecture : 3.49 ~ 4.06 m/s
DVD (disque Digital Versatile (numérique
polyvalent))
Durée de lecture approximative
(Disque simple face, simple couche) : 135 min
Disques
Vitesse de lecture : De 4,8 à 5,6 m/s
Durée de lecture maximale : 74 min
Vitesse de lecture : De 4,8 à 5,6 m/s
Durée de lecture maximale : 20 min
1 canal : 1.0 Vc-c (charge de 75 Ω)
Disques Blu-ray/HD DVD/DVD : 480i
Y : 1.0 Vc-c (charge de 75Ω)
CD : 5 po (DISQUES COMPACTS)
CD : 3 1/2 po
(DISQUES COMPACTS)
Vidéo composite
Pr : 0.70 Vc-c (charge de 75Ω)
Vidéo Composantes
Sortie
vidéo
Pb : 0.70 Vc-c (charge de 75Ω)
Disques Blu-ray/HD DVD : 1080i, 720p, 480p, 480i
DVD : 480p, 480i
Signal de luminance : 1.0 Vc-c (charge de 75Ω)
Signal de chrominance : 0,3 Vc-c (charge de 75Ω)
Disques Blu-ray/HD DVD/DVD : 480i
1080p, 1080i, 720p, 480p
S-Vidéo
HDMI
Vidéo / Audio
Audio PCM multiplex, audio à train de bits, audio PCM
G (1 / G), D (2 / D)
2 canaux
5,1 canaux
F/L, F/R, R/L, R/R, C/T, S/W, SBR, SBL
Opticale / Coaxiale
Sortie audio numérique
Échantillonnage à 48 kHz : de 4 Hz à 22 kHz
Échantillonnage à 96 kHz : de 4 Hz à 44 kHz
110 dB
Sortie
audio
*Réponse en fréquence
*Rapport signal sur bruit
*Dynamique
100 dB
*Distorsion harmonique totale
0.003%
*: Caractéristique nominale
- Samsung Electronics Co., se réserve le droit de modifier ces caractéristiques techniques sans préavis.
- Le poids et les dimensions sont approximatifs.
Français _65
Download from Www.Somanuals.com. All Manuals Search And Download.
PROTECTION CONTRE LA COPIE
COPY PROTECTION
Avis de conformité de compatibilité
Les disques ne sont pas TOUS compatibles
•
Conformément aux limitations décrites ci-dessous et à celles
mentionnées ailleurs dans ce manuel, incluant dans le chapitre sur
les types de disques et leurs caractéristiques, les disques suivants
peuvent être lus : Les disques préenregistrés de type commercial
BD-ROM, HD DVD, DVD-Vidéo et Audio, CD, DVD-RW / DVD-R
et CD-R.
•
En fonction des lois sur les droits d’auteur des États-
Unis et d’autres pays, la copie non autorisée, l’utilisation.
la distribution ou la modification d’émissions de
télévision ou de cassettes vidéo, de supports BD,
HD DVD, DVD, CD et d’autre matériel peut mener à des
responsabilités civiles et / ou criminelles.
•
•
Les disques de type autre que ceux mentionnés plus haut ne
peuvent être lus et ne sont pas destinés à ce lecteur. De plus,
certains de ces disques peuvent être incompatibles en fonction de
l’une ou plusieurs des raisons mentionnées plus bas.
Samsung ne peut garantir que ce lecteur peut lire tous les disques
portant les logos BD-ROM, HD DVD, DVD-Vidéo, DVD-RW /
DVD-R et CD-R et ce lecteur peut ne pouvoir répondre à toutes
les commandes et caractéristiques de tous les disques. La
compatibilité de ces disques et d’autres disques et les problèmes
de fonctionnement du lecteur avec de nouveaux formats ou
formats existants sont possibles puisque :
•
Plusieurs disques BD/HD DVD/DVD sont encodés avec
une protection contre la copie. De ce fait, vous devriez
raccorder votre lecteur Duo HD directement à votre
téléviseur et non pas à un magnétoscope. Le
raccordement à un magnétoscope pourrait reproduire
une image déformée depuis les disques BD/HD DVD/
DVD protégés contre la copie.
•
Ce produit incorpore une technologie de protection des
droits d’auteur à l’aide de méthodes revendiquant
certains brevets des É-U et d’autres droits de propriété
intellectuelle, propres à la Macrovision Corporation et à
d’autres propriétaires de droits. L’utilisation de cette
technologie de protection des droits d’auteur doit être
autorisée par la Macrovision Corporation et est destinée
à des seules fins personnelles et autres utilisations de
visionnement limitées, sauf avec l’autorisation de la
Macrovision Corporation. L’ingénierie inverse et le
démontage sont prohibés.
- Le format BD/HD DVD est récent et toujours en évolution ; ce
lecteur peut ne pas exécuter toutes les fonctions des disques
BD/HD DVD puisque certaines d'entre elles sont facultatives ;
des fonctions supplémentaires peuvent avoir été ajoutées au
format BD/HD DVD après la production du lecteur et certaines
fonctions disponibles peuvent faire l’objet d’une disponibilité
différée ;
- toutes les versions de nouveau format de disque ou de format
existant ne sont pas accueillies par ce lecteur ;
- les nouveaux formats et les formats existants peuvent être
révisés, modifiés, mis à niveau, améliorés et / ou augmentés ;
- certains disques sont fabriqués de façon à permettre un
fonctionnement et / ou des caractéristiques limités ou
spécifiques pour la lecture ;
- certaines de ces caractéristiques peuvent être facultatives, des
caractéristiques supplémentaires peuvent avoir été ajoutées
après la production de ce lecteur et certaines caractéristiques
disponibles peuvent faire l’objet d’une disponibilité différée ;
- certains disques portant les logos BD-ROM, HD DVD, DVD-
Vidéo, DVD-RW / DVD-R et CD-R peuvent être de type non
standard ;
- certains disques peuvent ne pas être lus en fonction de leur état
physique ou de leur condition d’enregistrement ;
•
•
En fonction des lois sur les droits d’auteur des États-
Unis et d’autres pays, la copie non autorisée, l’utilisation.
la distribution ou la modification d’émissions de
télévision ou de cassettes vidéo, de supports BD, DVD,
CD et d’autre matériel peut mener à des responsabilités
civiles et / ou criminelles.
Pour les lecteurs Duo HD à sortie par
balayage progressif :
LES CONSOMMATEURS DOIVENT BIEN
REMARQUER QUE TOUS LES TÉLÉVISEURS À
HAUTE DÉFINITION NE SONT PAS
TOTALEMENT COMPATIBLES AVEC CET
APPAREIL ET PEUVENT REPRODUIRE
CERTAINS OBJETS SUR L'IMAGE. EN CAS DE
PROBLÈMES D'IMAGE EN COURS DE
BALAYAGE PROGRESSIF, NOUS VOUS
CONSEILLONS DE BRANCHER L'APPAREIL
SUR LA SORTIE « STANDARD DEFINITION
(DÉFINITION NORMALE) ». SI VOUS AVEZ DES
QUESTIONS CONCERNANT LA COMPATIBILITÉ
DE NOTRE TÉLÉVISEUR AVEC CE PRODUIT,
VEUILLEZ CONTACTER NOTRE CENTRE DE
SERVICE À LA CLIENTÈLE.
- certains problèmes ou erreurs se produisent lors de la création
du logiciel des BD, HD DVD, DVD et / ou de leur fabrication ;
- ce lecteur fonctionne d’une façon autre qu’un lecteur DVD
standard ou qu’un autre appareil AV ; et / ou
- pour des raisons mentionnées ailleurs dans ce manuel ou pour
d’autres raisons découvertes et affichées par les centres d’aide
à la clientèle de SAMSUNG.
•
•
Si vous éprouvez des problèmes de compatibilité ou de
manipulation, veuillez contacter un centre d’aide à la clientèle
SAMSUNG. Vous pouvez en plus contacter une centre d’aide à la
clientèle SAMSUNG pour obtenir des mises à niveau potentielles
pour ce lecteur.
Pour obtenir des renseignements supplémentaires sur les
limitations et la compatibilité des disques, reportez-vous aux
chapitres Consignes de précautions, avant de lire ce manuel de
l’utilisateur, types de disque, caractéristiques et avant d’effectuer
une lecture de ce manuel.
66_ appendice
Download from Www.Somanuals.com. All Manuals Search And Download.
GARANTIE LIMITEE A L’ACHETEUR INITIAL
Samsung Electronics Canada Inc. (SECA) garantit ce produit contre tout défaut de fabrication.
SECA garantit aussi que si cet appareil ne fonctionne pas convenablement durant la période
de garantie SECA se réservera le droit de réparer ou de remplacer l’appareil défectueux.
Toutes les réparations sous garantie doivent être effectuées par un Centre de service
autorisé SECA.
Le nom et l’adresse du Centre de service le plus près de chez vous peut être obtenu en
composant sans frais le 1-800-268-1620 ou en visitant notre site web au www.samsung.ca
Main-d’oeuvre
Pièces
un (1) an (au comptoir)
un (1) an
Pour tous les modèles portatifs, le transport de l’appareil sera la responsabilité du client.
Le reçu de vente original doit être conservé par le client car cela constitue la seule preuve
d’achat acceptée.
Le client doit le présenter au Centre de service agréé au moment où il fait la demande d’une
réparation sous garantie.
EXCLUSIONS (CE QUI N’EST PAS COUVERT)
Cette garantie ne couvre pas les dommages causés par un accident, un incendie, une
inondation, un cas de force majeure, un mauvais usage ou une tension incorrecte. La
garantie ne couvre pas une mauvaise installation, une mauvaise réparation, une réparation
non autorisée et tout usage commercial ou dommages survenus durant le transport. Le fini
extérieur et intérieur de même que les lampes ne sont pas couverts par cette garantie. Les
ajustements par le client qui sont expliqués dans le guide de l’utilisateur ne sont pas couverts
en vertu de cette garantie. Cette garantie sera automatiquement annulée pour tout appareil qui
aurait un numéro de série manquant ou modifié. Cette garantie est valable seulement sur les
appareils achetés et utilisés au Canada.
SIÈGE SOCIAL
SAMSUNG ELECTRONIQUE CANADA INC.,
SERVICE À LA CLIENTÈLE
55 STANDISH COURT MISSISSAUGA, ONTARIO L5R 4B2 CANADA
FABRIQUE EN CORÉE
1-800-SAMSUNG (1-800-7267864)
www.samsung.com/ca
Download from Www.Somanuals.com. All Manuals Search And Download.
Contacter SAMSUNG À TRAVERS LE MONDE
Si vous avez des questions ou commentaires concernant les produits Samsung, veuillez communiquer avec le
service à la clientèle SAMSUNG.
Région
Pays
Web Site
Service à la clientèle ꢀ
1-800-SAMSUNG(726-7864)
01-800-SAMSUNG(726-7864)
1-800-SAMSUNG(726-7864)
0800-333-3733
0800-124-421 , 4004-0000
800-SAMSUNG(726-7864)
0-800-507-7267
1-800-10-7267
800-6225
1-800-299-0013
1-800-234-7267
CANADA
MEXICO
U.S.A
www.samsung.com/ca
www.samsung.com/mx
www.samsung.com/us
www.samsung.com/ar
www.samsung.com/br
www.samsung.com/cl
www.samsung.com/latin
www.samsung.com/latin
www.samsung.com/latin
www.samsung.com/latin
www.samsung.com/latin
www.samsung.com/latin
www.samsung.com/latin
www.samsung.com/latin
North America
ARGENTINE
BRAZIL
CHILE
COSTA RICA
ECUADOR
EL SALVADOR
GUATEMALA
JAMAICA
Latin America
PANAMA
800-7267
1-800-682-3180
1-800-751-2676
PUERTO RICO
REP. DOMINICA
TRINIDAD & TOBAGO
1-800-SAMSUNG(726-7864)
www.samsung.com/latin
VENEZUELA
COLOMBIA
BELGIUM
0-800-100-5303
01-8000112112
0032 (0)2 201 24 18
www.samsung.com/latin
www.samsung.com.co
www.samsung.com/be
844 000 844
Distributor pro ýeskou republiku :
Samsung Zrt., þeska organizaþní složka
Vyskoþilova 4, 14000 Praha 4
CZECH REPUBLIC
www.samsung.com/cz
DENMARK
FINLAND
70 70 19 70
030-6227 515
3260 SAMSUNG(726-7864) or
08 25 08 65 65 ( 0,15/Min)
www.samsung.com/dk
www.samsung.com/fi
FRANCE
www.samsung.com/fr
GERMANY
HUNGARY
ITALIA
LUXEMBURG
NETHERLANDS
NORWAY
01805 - 121213 ( 0,14/Min)
06-80-SAMSUNG(726-7864)
800-SAMSUNG(726-7864)
0035 (0)2 261 03 710
0900 20 200 88 ( 0,10/Min)
815-56 480
0 801 801 881 , 022-607-93-33
80 8 200 128
0800-SAMSUNG(726-7864)
902 10 11 30
0771-400 200
0870-SAMSUNG(726-7864)
0818 717 100
0800-SAMSUNG(726-7864)
0800-SAMSUNG(726-7864)
8-800-555-55-55
www.samsung.de
www.samsung.com/hu
www.samsung.com/it
www.samsung.com/be
www.samsung.com/nl
www.samsung.com/no
www.samsung.com/pl
www.samsung.com/pt
www.samsung.com/sk
www.samsung.com/es
www.samsung.com/se
www.samsung.com/uk
www.samsung.com/ie
www.samsung.com/at
www.samsung.com/ch
www.samsung.ru
Europe
POLAND
PORTUGAL
SLOVAKIA
SPAIN
SWEDEN
U.K
Republic of Ireland
AUSTRIA
Switzerland
RUSSIA
KAZAHSTAN
UZBEKISTAN
KYRGYZSTAN
UKRAINE
LITHUANIA
LATVIA
8-10-800-500-55-500
8-800-120-0-400
00-800-500-55-500
8-800-502-0000
8-800-77777
800-7267
www.samsung.kz
www.samsung.uz
CIS
www.samsung.ua
www.samsung.lt
www.samsung.com/lv
www.samsung.ee
ESTONIA
800-7267
AUSTRALIA
New zealand
CHINA
HONG KONG
INDIA
INDONESIA
JAPAN
MALAYSIA
PHILIPPINES
SINGAPORE
THAILAND
TAIWAN
1300 362 603
www.samsung.com/au
www.samsung.com/nz
www.samsung.com.cn
www.samsung.com/hk
www.samsung.com/in
www.samsung.com/id
www.samsung.com/jp
www.samsung.com/my
www.samsung.com/ph
www.samsung.com/sg
www.samsung.com/th
www.samsung.com/tw
www.samsung.com/vn
www.samsung.com.tr
www.samsung.com/za
0800SAMSUNG(726-7864)
800-810-5858 , 010-6475 1880
3698-4698
3030 8282 , 1800 110011
0800-112-8888
0120-327-527
1800-88-9999
1800-10-SAMSUNG(726-7864)
1800-SAMSUNG(726-7864)
1800-29-3232 , 02-689-3232
0800-329-999
1 800 588 889
444 77 11
Asia Pacific
VIETNAM
Turkey
SOUTH AFRICA
Middle East &
Africa
0860-SAMSUNG(726-7864 )
800-SAMSUNG (726-7864),
8000-4726
U.A.E
www.samsung.com/mea
Download from Www.Somanuals.com. All Manuals Search And Download.
|
Rangemaster Electric Heater U105510 01 User Guide
RCA VCR VR646HF User Guide
RIDGID Pressure Washer RD80964 User Guide
Roksan Audio DVD Player Caspian User Guide
Sakar Digital Camera 49552N User Guide
Samsung CRT Television TXM 1367 User Guide
Samsung Printer ML2165W User Guide
Samsung Telephone SGH C327 User Guide
Seagate Computer Drive DM000 User Guide
Sennheiser Headphones Encore HS1 User Guide