No. 2
September 1996
Topic Toll Restriction
Introduction
Toll Restriction is the ability to control external trunk call destinations. The Samsung DCS
supports a comprehensive Toll restriction system which can limit access to called
destinations based on dialled digits or time of day. Restrictions can be placed on stations and
or trunks.
The flowchart below shows how the Samsung DCS system performs toll restriction.
Start
Yes
Trunk
No
PABX?
Compare 1st
digits to PABX
Access Codes
Digit(s) in
PABX Access
Code Table
?
No
Yes
Look at digits
following PABX
Access Code
Look at dialled
digits
Digit(s)
in Deny
Table ?
No
Yes
Yes
No
Digits in Allow
Table
?
Allow call to
progress
Bar Call
Samsung DCS Application Note No 2 - Issue 01
Page 1 of 6
For Further Information Call LSP Communications
Download from Www.Somanuals.com. All Manuals Search And Download.
MMC 701- Assign COS Contents
There are many sections to MMC 701 including the first data field which relates to Class of
Restriction (COR). This application note only refers to the COR data field of MMC 701.
There are eight choices for Class of Restriction; A, B, C, D, E, F, G and H. Of the eight
choices, only B, C, D, E, F and G can be defined by the technician.
Class of Restriction Definition
A
B
C
D
E
F
No Toll Restrictions for COR A
Technician defined
Technician defined
Technician defined
Technician defined
Technician defined
G
H
Technician defined
No Outgoing Access for COR H
The technician can define the Classes of Restriction using the following MMCs:
MMC
MMC 702
MMC 703
MMC 704
Title
Toll Deny Table
Toll Allowance Table
Assign Wild Character
MMC 702 - Toll Deny Table
There are 200 locations in the MMC 702 Toll Deny Table. Each location consists of two fields.
The first digit(s) in the dial string to be barred are entered in the first field of each location.
Valid data includes digits “0” to “9”, * , # and Wild Characters X, Y and Z. The maximum
number of characters in the first field is twelve.
The second field is used to indicate which COR the first field relates to.
If a “1” is programmed for a COR in the second field, the first field applies to that COR. If a “0”
is programmed in the second field for a COR, that COR is not barred for the data in the first
field.
Example
Deny (007) :
0055
B
0
C
0
D
1
E
1
F
1
G
1
:
In this example, stations with COR B and C are not barred from dialling 0055 numbers but
stations with COR D, E, F, and G are barred from dialling 0055 numbers.
Examples are given later in this Application Note using Wild Characters in MMC 702.
MMC 703 - Toll Allowance Table
There are 200 locations in the MMC 703 Toll Allowance Table. Each location consists of two
fields.
Samsung DCS Application Note No 2 - Issue 01
Page 3 of 6
For Further Information Call LSP Communications
Download from Www.Somanuals.com. All Manuals Search And Download.
As mentioned above, MMC 703 is only used if the first digit(s) in the dialled string are
programmed in MMC 702. MMC 703 may be considered as “an exception to the MMC 702
rule”. The flowchart describes how the Samsung DCS uses MMC 702 and MMC 703.
The first field contains the digit(s) that are the exception and the second field indicates to the
DCS which CORs the exception applies. This is a similar arrangement to MMC 702.
A “1” in the second field indicates which CORs have the exception applied. A “0” in the
second field indicates that COR does not have the exception applied to it.
Please note that a Wild Character must be placed at the end of the Deny Table (MMC 702) to
indicate there is an exception in MMC 703. Wild Characters are described in detail below.
Example
This example follows on from the example given for MMC 702. In this case, stations with
COR D cannot generally dial “0055” numbers but can dial “0055 11235”.
MMC 702
Deny (007) :
0055Z
B
0
C
0
D
1
E
1
F
1
G
1
:
The Wild Character Z is programmed after 0055 to indicate there is an exception
programmed in MMC 703
MMC 703
Alow (001) :
005511235 :
B
0
C
0
D
1
E
0
F
0
G
0
A “0” is programmed for CORs B and C because they can dial all “0055” numbers. A “0” is
programmed for CORs E, F and G because they are not permitted to dial any “0055”
numbers.
MMC 704
:
Z :
0
1
1
1
2
1
3
1
4
1
5
1
6
1
7
1
8
1
9
1
*
1
#
1
“1”s are programmed for all digits to indicate that no digits may be dialled after “0055” except
the number(s) in the Allowance Table - MMC 703.
Samsung DCS Application Note No 2 - Issue 01
For Further Information Call LSP Communications
Page 4 of 6
Download from Www.Somanuals.com. All Manuals Search And Download.
MMC 704 - Assign Wild Character
Wild Characters are used to simplify programming for Toll Restriction. There are three Wild
Characters - X, Y, and Z.
A wild character can be used in place of any digit after it has been defined in MMC 704.
MMC 704 has two fields for data. The first field indicates which Wild Character is being
defined and the second field indicates to which digits the Wild Character applies.
Example
Wild Character X is used to represent all digits except digit “9”.
:
0
1
1
1
2
1
3
1
4
1
5
1
6
1
7
1
8
1
9
0
*
1
#
1
X :
An application of Wild Character X defined above could be used in Melbourne or Sydney
where the only allowed digits for a station with local access are numbers beginning with “9”. If
stations with COR D were only allowed to dial local numbers, the following programming
could be used.
MMC 702
Deny (001) :
X
B
1
C
1
D
1
E
0
F
0
G
0
:
An alternate method of achieving the same result would be:
MMC 702
Deny
0Y
1Y
2Y
3Y
4Y
5Y
6Y
7Y
8Y
* Y
#Y
B
0
0
0
0
0
0
0
0
0
0
0
C
0
0
0
0
0
0
0
0
0
0
0
D
1
1
1
1
1
1
1
1
1
1
1
E
1
1
1
1
1
1
1
1
1
1
1
F
1
1
1
1
1
1
1
1
1
1
1
G
1
1
1
1
1
1
1
1
1
1
1
:
:
:
:
:
:
:
:
:
:
:
The purpose of the Wild Character Y after each digit is to permit exceptions in MMC 703.
MMC 704
:
0
1
1
1
2
1
3
1
4
1
5
1
6
1
7
1
8
1
9
1
*
1
#
1
Y :
Samsung DCS Application Note No 2 - Issue 01
Page 5 of 6
For Further Information Call LSP Communications
Download from Www.Somanuals.com. All Manuals Search And Download.
The example above demonstrates that using Wild Characters makes programming easier for
the technician. Wild Characters are especially useful when Toll Restriction Tables are
required for rural areas where the definition of a local call is far more complex than in the
Capital cities.
Case Studies
Case Study No 1
A Melbourne Customer wishes stations to have outgoing access as described in the table
below.
Digits
Use
COR A COR B COR C COR D
COR E
000 only
ü
All
ü
Aus
ü
Vic
ü
Local
ü
000 Emergency
9 Local
ü
ü
ü
ü
´
´
´
´
´
´
´
´
´
´
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
02 NSW
07 QLD
08 WA/SA/NT
´
´
´
ü
ü
ü
´
´
´
ü
ü
1800 Free
013 Enquiry
5 Vic Country
6 Tas
´
´
ü
´
ü
13 13 call
005511235 Recorded
´
´
This Case Study Assumes the DCS is being programmed from default data.
Use the following MMCs
301
701
702
703
704
Samsung DCS Application Note No 2 - Issue 01
For Further Information Call LSP Communications
Page 6 of 6
Download from Www.Somanuals.com. All Manuals Search And Download.
|