Samsung Cell Phone A460 User Guide

Samsung A460  
User Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Table of Contents  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1
Getting Started  
In This Section  
Activating Your Phone  
Setting Up Your Voicemail  
Understanding This User Guide  
his section walks you through the step-by-step basics of setting up  
service for your phone, including unlocking and activating your phone  
and setting up your voicemail.  
T
Once you have completed this section, you’re ready to explore the advanced  
features of your new phone.  
Section 1  
Getting Started  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Turning Your Phone ON and OFF  
Turning Your Phone ON  
To turn your phone on, press  
for approximately two seconds.  
Once your phone is ON, it displays “Looking for Service” indicating that  
your phone is searching for a signal. When your phone finds a signal, it  
automatically enters Standby mode – the phone’s idle state. At this point,  
you are ready to begin making and receiving calls.  
If your phone is unable to find a signal after 15 minutes of searching, a  
Power Save feature is automatically activated. When a signal is found,  
your phone automatically returns to standby mode.  
In power save mode, your phone searches for a signal periodically  
without your intervention. You can also initiate a search for network  
service by pressing any key (when your phone is turned ON).  
Tip: The Power Save feature helps to conserve your battery power when  
you are in an area where there is no signal.  
Turning Your Phone OFF  
Press  
for two seconds.  
Your screen remains blank while your phone is off.  
Getting Started  
Determine If Your Phone Is Already Activated  
If you received your phone in the mail, it has probably been activated.  
All you need to do is unlock your phone.  
If your phone is not activated, please call your wireless service provider.  
Section 1  
Getting Started  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Unlocking Your Phone  
Follow these steps to unlock your phone:  
1. Press and hold  
2. Press  
to turn the phone on.  
.
3. Enter your four-digit lock code. For security purposes, the code is not  
visible as you type.  
Tip: If you can’t recall your lock code, try using the last four digits of either  
your Social Security number or phone number or try 0000. If none of these  
work, call your wireless service provider.  
Activating Your Phone  
If your phone was not already activated, call your wireless service  
provider for assistance.  
Setting Up Your Voicemail  
All unanswered calls to your phone are automatically transferred to  
voicemail, even if your phone is in use or turned off. Therefore, you will  
want to set up your voicemail box and personal greeting as soon as your  
phone is activated.  
To set up voicemail:  
1. Press and hold  
.
2. Follow the system prompts to create your pass code, record your  
greeting, record your name announcement and choose whether to  
activate One-Touch Message Access (a feature that lets you press one  
key to access messages and bypasses the need for you to enter your  
pass code).  
Note: The voicemail setup process may vary in certain affiliate areas.  
Section 1  
Getting Started  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Understanding This User Guide  
This user guide introduces you to our technology and all the advantages  
of your new phone – through easy-to-follow instructions.  
Sections break down categories of information to progressively take  
you all the way from learning the basics to using the most advanced  
phone features.  
Tips highlight special shortcuts and timely reminders to help you  
make the most of your new phone.  
The Index helps you find specific information quickly.  
We know that your time is valuable and that’s why we’ve designed this  
guide to be used in a building block format or in stand-alone sections.  
You’ll get the most out of your phone if you read each section. However, if  
you’d like to get right to a specific feature, you’ll be able to locate the  
specific section using the colored tabs. Follow the instructions in that  
section and you’ll be ready to use your phone in no time.  
Section 1  
Getting Started  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
2
Getting to Know Your Phone  
In This Section  
Front View of Phone  
Viewing the Display Screen  
Your Phone’s Highlights and Features  
Using the Battery  
our phone is packed with features that simplify your life and expand  
your ability to stay connected to the people and information that are  
Y
important to you. We know that you’re anxious to start using it, so this  
section will give you a quick introduction to your new phone. The  
easy-to-follow instructions will guide you through the basics of the most  
common features of your phone and you’ll be on your way to using it in  
no time.  
Don’t forget the other chapters in this guide. They’re filled with information  
about the capabilities and benefits of your new phone. They include detailed  
step-by-step instructions that familiarize you with all the features and  
explain how to customize your phone to meet your specific needs.  
Section 2  
Getting to Know Your Phone 11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Highlights and Features  
Congratulations on the purchase of your phone (SPH-A460). This phone  
is lightweight, easy-to-use, reliable, and offers many significant features:  
Dual-band capability provides access to other PCS CDMA and analog  
cellular networks where the network available to you has  
implemented roaming agreements. For further information see  
The wireless Internet browser provides access to the wireless Internet  
in digital mode. For further information see "The Wireless Internet  
The wireless data connection offers wireless modem capabilities for  
your personal computer in digital mode. For further information see  
Large 4-level gray scale, 6-line blue display.  
User friendly, menu driven access to features and options.  
The phone’s “flip” cover can be set to answer an incoming call  
when opened.  
External LCD  
The backlit display screen makes it effortless to read the display in  
low light environments and at night.  
An Internal Phone Book with 250 number capacity.  
Speed Dialing, there are four methods of calling numbers previously  
stored in the Internal Phone Book.  
A Calendar function allows the scheduling of events, the ability to  
create “Task Lists”, set timers and alarms.  
Voice activated dialing with 10 locations.  
T9 predictive text entry for simplicity in entering names and events  
into both the Internal Phone Book and Calendar.  
Vibrate mode announces incoming calls and messages without  
disturbing people around you.  
MIDI ringers and melodies.  
A choice of melodies can be used instead of ringer types.  
One-Touch Internet Access.  
Section 2  
12  
Getting to Know Your Phone  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Front View of Phone  
Section 2  
Getting to Know Your Phone 13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Command Keys  
Menu: Displays the first level or Main Menu of options.  
Highlight and press again to view the next menu page.  
OK: Pressing when navigating through a menu accepts the  
highlighted choice in the menu. Pressing for two seconds  
automatically dials your voicemail.  
Internet Key: This key allows you to have One-Touch  
Internet access. When this key is pressed, the wireless  
Internet browser is launched.  
Navigation Key: This key allows you to scroll through the  
phone menu options, and provides a shortcut to phone  
functions from Standby Mode.  
Volume Key: (On the side of your phone). Adjust the ringer  
volume in standby mode (with the flip open). Adjust the voice  
volume during a call. In a menu, scroll up or down to  
navigate through the menu options. Volume Keys also mute  
the ringer during an incoming call.  
TALK: Place or receive a call. In standby mode, press the key  
once to enter the Outgoing call log. If you press and hold the  
key down you will initiate Voice Dial.  
CLR (CLEAR): Deletes characters from the display. When in a  
menu, press to return to the previous menu.  
END: Ends a call. Press and hold this key to turn your phone  
On or Off. While in the main menu, it returns the phone to  
standby mode and cancels your input.  
Numeric Keys: Use these keys to enter numbers, letters,  
and characters.  
Pound: Enters the pound [#] character for calling features. In  
text entry mode, press to enter a space.  
Asterisk: Enters the asterisk [*] character for calling features.  
In text entry mode, press to change the character input type.  
Section 2  
14  
Getting to Know Your Phone  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Headset Jack: (on the top of the phone.) Allows you to plug  
in an optional headset for safe, convenient hands-free  
conversations.  
Viewing the Display Screen  
Main LCD:  
This list identifies the symbols you’ll see on your main LCD screen.  
shows your current signal strength.The more lines you have,  
the stronger your signal.  
shows that the GPS receiver is On or Off.  
means your phone cannot find a signal.  
tells you a call is in progress.  
indicates you are “roaming” off the network available to you.  
indicates you are “roaming” off the network available to you  
on an analog system.  
indicates you have voicemail, text or numeric pages waiting.  
Press briefly to see a list of pending messages or press and hold to  
dial voicemail.  
indicates your phone is in vibrate mode.  
shows your current battery charge strength. (Icon shown  
fully charged.)  
External LCD:  
shows your current signal strength.The more lines you have,  
the stronger your signal.  
means your phone cannot find a signal.  
tells you a call is in progress.  
Time/Date is displayed.  
shows your current battery charge strength. (Icon shown  
fully discharged.) Icon is animated while charging.  
indicates you have voicemail, text or numeric  
pages waiting.  
Tip: Display indicators let you know when you’re off the network available  
to you and whether you’re operating in digital or analog mode.  
Section 2  
Getting to Know Your Phone 15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Using the Battery  
Battery Capacity  
Your phone is equipped with a Lithium Ion (LiIon) battery. It allows you  
to recharge your battery before it is fully drained. The battery provides  
approximately 2.4 hours of continuous digital talk time  
(1.3 hour in analog) or approximately 7 days of continuous digital  
standby time (15 hours in analog). The battery charges in about 4 hours  
using the travel charger supplied with your phone.  
Approximately five minutes before the battery charge level gets too low to  
operate the phone, the battery sensor will let you know by blinking an  
empty battery icon ( ), sounding an audible alert and displaying a  
warning message. If you continue to operate the phone without  
charging, the phone will turn off automatically (after a three to five  
minute delay). If this happens, your call will end.  
Note: Long backlight settings, searching for service, vibrate mode and  
Browser use affect the battery’s talk and standby times.  
Tip: Be sure to charge your phone’s battery and watch your indicator to  
ensure your levels are okay.  
Installing the Battery  
Your phone comes with a LiIon battery. Follow these steps to install it:  
1. Place the battery on to the back of the phone, making sure that the  
three plastic tabs line up with the corresponding slots on the phone.  
2. Gently push the battery down and upward on the phone until it snaps  
into place.  
Section 2  
16  
Getting to Know Your Phone  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Removing the Battery  
To remove your battery for charging or for another reason, follow these  
easy steps:  
1. Make sure the power is off by pressing and holding  
so you don’t  
lose any stored numbers or messages.  
2. Push down the battery release latch and slide the battery downwards.  
3. Lift the battery away from the phone.  
Charging the Battery  
Your phone comes with a rechargeable battery. You should charge the  
battery as soon as possible so you can begin using your phone.  
Keeping track of your battery’s charge is important. For a quick check of  
your phone’s battery level, glance at the battery charge indicator located  
in the upper-right corner of your phone’s display screen. If the battery  
charge gets too low, the battery icon (  
a warning tone.  
) blinks and the phone sounds  
Always use an approved Travel Charger or Vehicle Power Adapter to  
charge your battery.  
Warning! Using the wrong battery charger could cause damage to your  
phone and void the warranty.  
Section 2  
Getting to Know Your Phone 17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Using the Travel Adapter  
To use the travel charger provided with your phone:  
1. Plug the travel charger power cord into a wall outlet.  
2. Plug the other end of the travel charger into the bottom of the phone,  
with the battery installed.  
The LED on the phone indicates the following:  
A red light with battery animation indicates the battery is charging.  
A green light without animation indicates the battery is fully  
charged.  
A yellow light indicates that the battery is operating at a temperature  
that is too high or too low, or that there is a poor connection. Make  
sure the phone is resting in the charger slot.  
It generally takes about four hours to fully recharge a completely  
discharged battery. With the approved LiIon battery, it is practical to  
recharge the battery before it becomes completely discharged.  
To get the quickest charge for any battery:  
Turn the phone off.  
Accessory Interface Connector  
The accessory interface connector at the bottom of the phone allows you  
to connect the Travel Charger or Vehicle Power Adapter to the phone. It  
also allows you to connect the optional USB Data cable to the phone. For  
Section 2  
18  
Getting to Know Your Phone  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3
Understanding Roaming  
In This Section  
Understanding How Roaming Works  
Understanding the Difference Between Roaming and  
Network Calls  
Setting Your Phone’s Roam Mode  
Setting and Using Call Guard  
oaming is the ability to make or receive calls while you’re off the  
R
network available to you. Your new dual-band phone works anywhere  
on the network and allows you to roam on analog and digital networks  
virtually anywhere in the U.S. where compatible wireless service is available.  
This section explains how roaming works as well as special features that let  
you manage your roaming experience.  
Section 3  
Understanding Roaming 19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Understanding How Roaming Works  
Recognizing Icons on the Display Screen  
Your phone’s display screen always lets you know when you’re off the  
network available to you and whether your phone is operating in analog  
or digital mode. The following chart indicates what you’ll see depending  
on where you’re using your phone.  
Roaming  
Indicator  
Analog  
Indicator  
Your Network  
Other Digital Networks  
Analog Networks  
Tip: Remember, when you’re using your phone off the network, always dial  
numbers using 11 digits (1 + area code + number).  
Note: You will pay a higher per-minute rate for roaming calls.  
Roaming on Other Digital Networks  
When you’re roaming on other digital networks, your call quality and  
security will be similar to the quality you receive when making calls  
while on the network. You may not be able to access certain calling  
features, such as the wireless Internet.  
Roaming on Analog Networks  
When you roam on analog networks, you will experience a similar  
quality provided by other analog carriers today. Although some calling  
features, such as the wireless Internet, may be unavailable, you can still  
make and receive calls. You will experience a few differences including:  
You are more likely to experience static, cross-talk, fade-out and  
dropped calls.  
Some calling features which are standard on the network, such as  
Call Waiting, the wireless Internet, and direct international dialing,  
are unavailable.  
Section 3  
20  
Understanding Roaming  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
There are security and privacy risks (eavesdropping and cloning)  
that exist with conventional analog services today.  
Your battery needs recharging sooner when you use your phone for  
analog roaming.  
Tip: If you’re on a call when you leave the network available to you and  
enter an area where roaming is available (whether digital or analog), your  
call is dropped. If your call is dropped in an area where you think service is  
available, turn your phone off and on again to reconnect to the network.  
Setting Your Phone’s Roam Mode  
Your phone allows you to control your ability to roam. By using the Roaming  
menu option, you determine which signals your phone accepts.  
Set Mode  
Choose from three different settings on your dual-band mode phone to  
control your roaming experience:  
1. Press  
2. Press  
3. Press  
for Main Menu.  
for Roaming.  
for Set Mode. To select an option, scroll to select  
Automatic, Network, or Analog.  
4. Press  
to Save.  
Automatic: This setting seeks service on the network available to  
you. When network service is unavailable, it searches for an  
alternative system.  
Network: This setting allows you to select the network only and  
prevents roaming on other networks.  
Analog: This setting forces the phone to seek an analog roaming  
system. The previous setting is restored the next time the phone is  
turned on.  
Section 3  
Understanding Roaming 21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Setting an Alert When Roam Charges Apply (Call Guard)  
In addition to the roaming icon, Call Guard alerts you when roaming  
charges apply. This feature makes it easy to manage your roaming  
charges by reminding you when you make or receive roaming calls. It  
also requires you to take additional steps before placing or answering a  
roaming call. These additional steps are not required when you make or  
receive calls while on the network available to you.  
To Turn the Call Guard Feature On or Off:  
1. Press  
2. Press  
3. Press  
for the Main Menu.  
for Roaming.  
for Call Guard. Wait briefly until a message prompt  
displays and then disappears from the display screen.  
4. Select Yes or No, and press  
.
If the Yes option is chosen, an extra step is required to make or take  
roaming calls.  
If the No option is chosen, no extra step is required to make or take  
roaming calls.  
To Place Roaming Calls With Call Guard On:  
1. From the main menu, dial the ten-digit number and press  
(You can also initiate a call from the Internal Phone Book, Call  
History or text messages.)  
.
2. A message is displayed indicating that roaming rate applies. Press  
to place the call.  
To Answer Incoming Roaming Calls With Call Guard On:  
Remember if the Call Guard feature is set to On, you need to take extra  
steps to make and receive roaming calls even if you have selected the  
Analog setting.  
Section 3  
22  
Understanding Roaming  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Setting the Time and Date in Analog mode  
The time and date are set automatically by the network available to you.  
If you are outside your coverage area and are in analog mode, the time  
and date are not automatically updated. To set the time and date in  
analog mode:  
1. Press  
2. Press  
3. Press  
for the Main Menu.  
for Calendar.  
for Set Time.  
4. Enter the correct time and date and press  
.
Section 3  
Understanding Roaming 23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4
Making and Answering Calls  
In This Section  
Making Calls  
Answering Calls  
Dialing Options  
In-Call and End-of-Call Options  
Using One-Touch/Two-Touch Speed Dialing  
Calling Emergency Numbers  
our phone gives you different options for placing calls, so you can use  
the method that works best for you. Once you learn the basics here, the  
possibilities are endless.  
Y
Section 4  
Making and Answering Calls 25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Making Calls  
Your phone offers many different ways to make calls, including  
To make a call using your keypad:  
1. Make sure your phone is on.  
2. Enter a phone number. (If you make a mistake while dialing, press  
to erase one digit at a time. Press and hold  
entire number.)  
3. Press . (To make calls when you are roaming, and Call Guard is  
enabled, press to acknowledge Roaming rates. For further  
to erase the  
4. When you’re finished, press  
or close the flip to complete  
the call.  
Tip: To redial your last outgoing call, press  
Press again to dial.  
to view the phone number.  
Tip: When making calls off the network available to you, always dial using  
11 digits (1 + area code + phone number).  
Answering Calls  
1. Make sure your phone is on. If your phone is off, incoming calls go  
to voicemail.  
2. When your phone rings, press  
. (To answer incoming calls when  
. For further  
you are roaming and Call Guard is enabled press  
3. To disconnect the call, press  
briefly.  
Section 4  
26  
Making and Answering Calls  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Adjusting Volume During a Conversation  
Whether you need to hear more or less of a conversation, adjust the  
volume keys on the side of your phone during a call.  
To preset the voice volume when the phone is in standby mode:  
1. Press  
2. Press  
3. Press  
.
for Sounds.  
for Voice Volume.  
4. Select the desired level using the volume keys and press  
to save  
and exit.  
Missed Call Notification  
When an incoming call is not answered, the number of missed calls  
together with the last call’s phone number is displayed on your screen.  
To display the Missed Call log and view the last 10 missed calls:  
1. Press  
2. Press  
3. Press  
.
for Call History.  
for Missed.  
Note: To view the details of the missed call, highlight the entry and  
press  
.
To dial a missed call entry’s phone number:  
Highlight the entry. Press  
.
Muting a Call  
There are times when it’s necessary to mute a call so that your caller does  
not hear you or certain background noise.  
To use this function during a call:  
1. Press  
.
2. Press  
to Mute.  
When the phone is muted, “Mute” appears on the display.  
To unmute a call:  
1. Press  
.
2. Press  
to UnMute.  
Section 4  
Making and Answering Calls 27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
           
Dialing Options  
Dialing options are displayed when you enter numbers using the keypad.  
To select an option, press and the number on the keypad that  
corresponds with the desired choice.  
(1) Talk is used to dial the phone number. (If you are roaming and  
have the Call Guard feature activated, you must then press  
.
(2) Save to save the phone number in your Internal Phone Book.  
(3) Find is used to locate and display Internal Phone Book entries  
that contain the numbers entered. (See "Finding Internal Phone  
(4) Hard Pause is used to insert a hard pause. (See "Dialing and  
(5) 2 Second Pause to insert a 2-second pause. (See "Dialing and  
Tip: To speed dial a phone number from the main menu, press and hold the  
Internal Phone Book entry number. If the entry number is two digits, enter  
the first digit, then press and hold the second digit.  
In-Call Options  
During a call, your phone displays menu options in addition to the main menu.  
To select an option, highlight it and press  
.
(1) Mute or UnMute Select Mute to mute your phone’s microphone.  
Select Unmute to reactivate the microphone.  
(2) Call History checks your call log for outgoing, incoming, and  
missed calls. You can also erase the logs from this menu.  
(3) PhoneBook accesses the Phone Book menu options.  
(4) 3-Way Call allows you to talk to two different people at the same  
time. (For more information, see "Three-Way Calling" on page 49.)  
(5) Messages allows you to check for voicemail and text messages.  
(6) Calendar accesses the Calendar menu options which allows you  
to schedule different events.  
(7) Version displays the hardware and software version being used.  
Section 4  
28  
Making and Answering Calls  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Incoming Call Notification  
Depending on your settings, your phone notifies you of incoming calls in  
the following ways:  
The phone rings and/or vibrates.  
The LED flashes.  
The backlight illuminates on the main LCD screen when the flip is open.  
The backlight illuminates the external LCD when the flip is closed.  
The main/external screen displays an incoming call message.  
If the phone number is available, the phone number of the caller  
is displayed.  
If the phone number is in your Internal Phone Book, the Phone  
Book entry’s name is displayed.  
The following option is also displayed.  
End: Silent to mute the ringer.  
Note: You can also mute the ringer by pressing the up or down volume key.  
Changing Ringer Volume  
To change the ringer volume, adjust the volume keys on the side of your  
phone when the phone is in Standby mode and the flip is open.  
Note: To change the ringer volume from the main menu, see "Changing  
End-of-Call Options  
After receiving a call from or making a call to a phone number that is not  
in your Internal Phone Book, the phone number, the duration of the call  
and the following menu options are displayed for 10 seconds. During this  
time, you can press to add this number to your Internal Phone Book.  
Note: The End-of-Call options are not displayed for calls identified as  
No ID or Restricted.  
Section 4  
Making and Answering Calls 29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Saving a Phone Number  
Your phone can store up to 250 Internal Phone Book numbers. Phone  
Book entries can store up to a total of six phone numbers and the entry’s  
name can contain 12 characters. There are seven different labels that are  
available, they are Home, Work, Mobile, Pager, Fax, or No Label. Any of  
these labels can be selected to be use as the Speed Dial number. Speed  
dial can only be assigned to one number in each phone book entry.  
To save a number from the main menu:  
1. Enter a phone number.  
2. Press  
3. Press  
4. Press  
.
for Save.  
for New Entry?.  
5. Select the desired label by scrolling through the Home, Work,  
Mobile, Pager, Fax, or No Label. Press  
.
6. Enter the name of the entry using the keypad. Press and select  
the desired entry mode. For more information on the different entry  
7. Press  
to exit the Enter Name screen.  
8. Press the Navigation key down and highlight the Entry field.  
9. Press the Navigation key to the left or right to display the desired  
entry, or leave the value defaulted to the first available.  
10. Press the Navigation key down to highlight the Speed Dial field.  
Note: The label selected in step 5 will already have the number being  
entered.  
11. Press the Navigation key left or right to scroll through all labels  
assigned to this entry. Choose the one you wish to be the primary  
number for this phone book entry.  
12. Press the Navigation key down to highlight the Secret field.  
13. Press the Navigation key left or right to scroll between On or Off.  
14. Press the Navigation key down to highlight the Home, Work,  
Mobile, Pager, Fax, No Label and E-mail fields.  
15. Press the Navigation key down and highlight the Group field.  
Section 4  
30  
Making and Answering Calls  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
16. Press the Navigation key left or right to scroll between No Group,  
Friend, Family, Colleague, and VIP.  
17. Press the Navigation key down and highlight the Name Ringer field.  
18. Press the Navigation key left or right to scroll through the different  
ringers.  
19. Press to save the entry in the internal phone book.  
Note: A phone number labeled Fax or Data can only be dialed through a  
personal computer.  
Finding a Phone Number  
You can search for Internal Phone Book entries with phone numbers that  
contain a specific string of numbers.  
To find a phone number:  
1. Enter one or more digits. The more numbers you enter, the more  
specific the search becomes.  
2. Press to display the main menu options.  
3. Press  
for Find. The phone prompts you to “Wait” and tells you  
how many numbers match the number of digits you just entered into  
the phone.  
4. Press the navigation key  
up or down to scroll through the list  
of available matches.  
5. When the desired number is displayed, press  
.
Section 4  
Making and Answering Calls 31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Four-Digit Dialing  
Your phone has the ability to find and dial 4-digits of any phone number  
stored in the address book.  
To call someone stored in your phone book by entering four digits of  
their phone number:  
1. From the standby mode, enter four digits of any phone number  
stored in the phone book.  
2. Press  
.
Note: If more than one number is found with the same last four digits, use  
the navigation key to scroll up or down to the desired entry. When the  
desired number is displayed, press  
.
Or:  
To dial four digits without the 4-digit dial feature interfering:  
1. From the standby mode, enter four digits.  
2. Press  
for 4-Digit Dial.  
Section 4  
32  
Making and Answering Calls  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Dialing and Saving Phone Numbers With Pauses  
You can dial or save phone numbers with pauses for use with automated  
systems, such as voicemail or credit card billing numbers. If you select a  
hard pause, the next set of numbers are sent when you press  
. If you  
select a 2-second pause, your phone automatically sends the next set of  
numbers after two seconds.  
Note: You can have multiple pauses in a phone number and combine  
2-second and hard pauses.  
To dial or save a phone number with pauses:  
1. When in standby mode, enter the first digits of the phone number  
that comes before the required pause.  
2. Press to open the Menu options.  
3. Press  
for Hard Pause or  
for a 2sec Pause. (Hard Pauses  
are displayed as a “P” and 2sec Pauses as a “T”.)  
4. Enter the additional numbers.  
Note: Complete step three and four again, if necessary.  
5. Press  
When dialing a number with a hard pause, highlight Talk:DTMF and  
press to send the next set of numbers.  
to dial.  
Calling Emergency Numbers  
You can place calls to 911 (dial  
and press  
), even if  
your phone is locked or your account is restricted.  
Section 4  
Making and Answering Calls 33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Using One/Two/Three Speed Dialing  
With this feature, you can automatically call Speed Dial entries using  
one key press for locations 1-9, two key presses for locations 10-99, or  
three key presses for locations 100-250.  
To use One-Touch Dialing for Speed Dial locations 1-9:  
Press and hold the appropriate key for two seconds. The display  
confirms that the number has been dialed when it shows  
“Connecting.”  
To use Two-Touch Dialing for Speed Dial locations 10-99:  
1. Press the first digit.  
2. Press and hold the second digit for two seconds. The display confirms  
that the number has been dialed when it shows “Connecting.”  
To use Three-Touch Dialing for Speed Dial locations 100-250:  
1. Press the first digit.  
2. Press the second digit.  
3. Press and hold the third digit for two seconds. The display confirms  
that the number has been dialed when it shows “Connecting”.  
Displaying Your Phone Number  
Just in case you forget your phone number, your phone can remind you.  
To display your phone number:  
1. From standby mode, press  
for Main Menu.  
2. Press  
for Phonebook.  
3. Press  
for My Phone #. Your phone number is displayed on  
the screen.  
Section 4  
34  
Making and Answering Calls  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
5
Navigating Through Menus and  
Entering Text  
In This Section  
Menu Navigation  
Viewing the Menus  
Entering Characters by Tapping the Keypad  
Entering Characters Using T9 Text Input  
Entering Symbols and Numbers  
his section is a road map to using your phone and also shows how to  
enter characters in your phone. Every function and feature can be  
accessed through a menu. Take a few moments to know your way around  
and how to enter text. You’ll find that it makes your phone easier to use.  
T
Section 5  
Navigating Through Menus and Entering Text 35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Menu Navigation  
Your phone allows you to scroll through menus quickly and easily. The  
scroll bar at the right of the menu keeps track of your position in the  
menu at all times.  
Working Within the Menu Structure  
Selecting Menu Items  
As you navigate through a menu, the options are highlighted. Select an  
option by highlighting it and pressing  
.
For example, if you want to view your last incoming call:  
1. From the main menu, highlight Call History and press  
.
2. Press the navigation key down to highlight Incoming and press  
.
If you have received any calls, they are displayed on the screen.  
Backing Up Within a Menu  
To go to the previous menu:  
Press  
To return to standby mode:  
Press  
.
.
Section 5  
36  
Navigating Through Menus and Entering Text  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Viewing the Menus  
Menu Diagram  
Menus let you check or change your phone settings. The following  
outline shows your phone’s menu structure.  
1. Call History  
1: Outgoing  
2: Incoming  
3: Missed  
4: Erase History  
1: Outgoing  
2: Incoming  
3: Missed  
4: All Calls  
5: Air Time  
1: Last Call  
2: Total Airtime  
2. Wireless Web  
1: Downloads  
2: Messages  
3: Web Alerts  
4: Start Browser  
5: Connection  
1: Data/Fax Off Voice Only  
2: Incoming Fax Only  
3: Incoming Data Only  
6: Web Guard  
1: None  
2: To Start  
3: To End  
4: Both  
7: Erase Msgs  
1: Page/Text  
2: Web Alerts  
3. Phone Book  
1: Find Name  
2: Add New Entry  
3: My Phone #  
4: Find Entry  
5: Group Search  
1: In No Group  
2: In VIPs  
3: In Colleague  
4: In Family  
5: In Friends  
Section 5  
Navigating Through Menus and Entering Text 37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
6: Add email  
7: Services  
1: Account Info  
2: Customer Care  
3: Dir Assist  
4: Prepaid SVC  
4. Roaming  
5. Calendar  
1: Set Mode  
1: Automatic  
2: Network  
3: Analog  
2: Call Guard  
1: No  
2: Yes  
1: Today  
2: Month View  
3: Jump to Date  
4: Task List  
5: Countdown  
6: Alarm Clock  
1: Alarm # 1  
2: Alarm # 2  
3: Alarm # 3  
7: Set Time  
6. Voicemail  
7. Voice Dial  
1: Listen  
2: Reset  
1: Record  
2: Review  
3: Erase All  
4: Set Active  
1: Talk Only  
2: Talk/Flip  
8. Sounds  
1: Ringer Volume  
1: Calls  
1: Off  
2: Vibrate  
3: 1-Beep  
4: Level 1-8  
5: Ring+Vib  
2: Messages  
1: Off  
2: Vibrate  
Section 5  
38  
Navigating Through Menus and Entering Text  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3: 1-Beep  
4: Level 1-8  
3: Alarms  
1: Off  
2: Level 1-8  
2: Ringer Type  
1: Voice Calls  
1: with Caller ID  
2: No Caller ID  
2: Messages  
1: Voicemail  
2: Page  
3: Text  
4: Web Alerts  
3: Alarms  
4: Data/Fax In  
5: Schedule  
3: Key Beep  
1: Off  
2: Level 1-8  
4: Tone Length  
1: Long  
2: Short  
5: Alerts  
1: Minute Beep  
1: Off  
2: On  
2: Service  
1: Off  
2: On  
3: Connect  
4: Disconnect  
1: On  
2: Off  
1: On  
2: Off  
6: Voice Volume  
1: Level 1-8  
7: Roam Ringer  
1: Normal  
2: Distinctive  
9. Setup/Tool  
1: Display  
1: Idle Screen  
1: Panda  
2: Dog  
3: Race Cars  
Section 5  
Navigating Through Menus and Entering Text 39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4: Night  
2: Backlight  
1: Flip Open  
2: 30 Seconds  
3: 8 seconds  
4: Off  
3: Greeting  
4: Contrast  
1: Lowest  
2: Low  
3: MED  
4: High  
5: Highest  
5: Version  
2: Security  
1: Lock Phone  
1: Unlocked  
2: On Power Up  
3: Lock Now  
2: Change Lock  
3: Special #  
1: Empty  
2: Empty  
3: Empty  
4: Erase PBook  
5: Reset Phone  
3: Call Answer  
1: Any Key  
2: Flip Open  
3: TALK Key  
4: Auto Answer (Car Kit/Headset)  
1: No  
2: Yes  
5: Language  
1: English  
2: Spanish  
6: Calculator  
7: Location  
1: Turn Location On  
2: Turn Location Off  
0. Games  
1: Push Push  
2: Fly Ribbon  
3: Spider Hunter  
InUse Menu  
1: Mute/UnMute  
Section 5  
40  
Navigating Through Menus and Entering Text  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2: Call History  
1: Outgoing  
2: Incoming  
3: Missed  
4: Erase History  
5: Air Time  
3: PhoneBook  
1: Find Name  
2: Add New Entry  
3: My Phone #  
4: Find Entry  
5: Group Search  
6: Add email  
7: Services  
4: 3-Way Call  
5: Messages  
1: Voice Mail  
2: Page/Text  
3: Erase Msgs  
6: Calendar  
1: Today  
2: Month View  
3: Jump to Date  
4: Task List  
5: Countdown  
6: Alarm Clock  
7: Set Time  
7: Version  
Section 5  
Navigating Through Menus and Entering Text 41  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Selecting a Character Input Mode  
When prompted to enter text, the current text entry mode will appear  
above the  
key in the lower right hand side of the display. There are  
four text entry modes:  
1. T9 (English)  
2. Alpha  
3. Symbol  
4. Number  
To change the Input Mode, press  
the keypad.  
then the corresponding number on  
When entering text, use the indicated key to perform the following text  
entry functions:  
Press  
Press  
Press  
to cycle through T9 word matches.  
to insert a space.  
to enter a period (.) and other common symbols.  
Section 5  
42  
Navigating Through Menus and Entering Text  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Entering Characters by Tapping the Keypad  
To enter characters by tapping the keypad, select the abc mode (see  
“Selecting a Character Input Mode” on page 42). Press the  
corresponding key until the desired character appears. By default, the  
first letter of a word is capitalized and following letters are lowercase.  
Characters scroll in the following order:  
. , - ? ! ‘ @ : 1  
A B C 2  
D E F 3  
G H I 4  
J K L 5  
M N O 6  
P Q R S 7  
T U V 8  
W X Y Z 9  
0
Shift  
Space  
Note: If you press and hold a numeric key for two seconds, the  
corresponding number automatically is displayed. All alpha characters  
associated with the key are bypassed.  
Section 5  
Navigating Through Menus and Entering Text 43  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Entering Characters Using T9 Text Input  
To enter characters using T9 Text Input, select the T9 Word mode (For  
T9 Text Input analyzes the letters you enter using an intuitive word  
database and creates a suitable word. (The word may change as you  
type.) If the word you want does not display after you have entered all the  
letters, press  
to scroll through additional word selections. To accept  
a word and insert a space, press  
.
If you make a mistake, press  
to erase a single character. Press and  
hold  
to delete an entire entry.  
Entering Symbols and Numbers  
To enter symbols, select the Symbol mode. (See "Selecting a Character  
Input Mode" on page 42). To enter a symbol, press the appropriate key  
indicated on the display.  
To enter numbers, select the Number mode and press the appropriate key  
Section 5  
44  
Navigating Through Menus and Entering Text  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
6
Adjusting Volume  
In This Section  
Changing the Ringer Volume  
Silencing the Ringer  
Adjusting Volume During a Conversation  
Muting a Call  
ith all the things that demand your attention in today’s fast-paced  
W
world, it’s important to tune-in to what really matters. Your phone  
gives you the ability to control your phone’s volume with the touch of a  
button. Not only can you control what you hear, you can also control what  
your caller hears.  
Section 6  
Adjusting Volume 45  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Changing Ringer Volume  
To change the ringer volume, use the volume keys on the side of your  
phone when the phone is in standby mode with the flip open.  
To change the ringer volume from the Main Menu:  
1. Press  
2. Press  
3. Press  
4. Press  
for Menu options.  
for Sounds.  
for Ringer Volume.  
for Calls.  
5. Select Off/Vibrate/1-Beep/Level 1-8/Ring+Vib, and press  
.
Silencing the Ringer  
To silence the ringer on incoming calls:  
1. When the phone rings, press a volume key, or . Press  
answer the call.  
to  
Adjusting Volume During a Conversation  
When you need to regulate the volume during a conversation, use the  
volume keys on the side of your phone to adjust the sound.  
Muting a Call  
There are times when it’s necessary to mute a call so that your caller does  
not hear you or certain background noise. To mute a call, press and hold  
for two seconds. To unmute a call, press and hold  
seconds.  
To Mute a call from the Main Menu:  
for two  
1. Press  
for Menu options, highlight UnMute.  
2. Press either or  
.
When the phone is muted, “Mute” displays.  
To UnMute a call:  
1. Press for Menu options.  
2. Highlight UnMute, and press or  
.
Section 6  
Adjusting Volume  
46  
Download from Www.Somanuals.com. All Manuals Search And Download.  
                 
7
Using Service Features  
In This Section  
Using Caller ID  
Responding to Call Waiting  
Three-Way Calling  
Forwarding Your Calls  
ow that you’ve mastered the basics, you can begin to focus on where you  
N
want to go. This section guides you step-by-step through the calling  
features that enhance your service. From Caller ID to Call Forwarding, using  
these features will help you make the most of your service.  
Section 7  
Using Service Features 47  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Using Caller ID  
Caller ID lets you know who’s calling by displaying the number of the  
person calling when your phone rings. If the caller’s name and number  
are already stored in your Internal Phone Book, the corresponding name  
appears with the number. In the same way, if you call someone who has  
this feature your phone number displays on their phone.  
To block your phone number from being displayed for a specific  
outgoing call:  
1. Press  
2. Enter the number you want to call.  
3. Press (or highlight Roam Call and press  
.
).  
To permanently block your number, call your wireless service provider.  
Responding to Call Waiting  
Call Waiting alerts you of incoming calls while you’re on a call by  
sounding a beep. The display screen informs you that a call is coming in  
and shows the caller’s phone number (if it’s available and you are in  
digital coverage).  
To respond to an incoming call while you’re on a call:  
Press . (This puts the first caller on hold and answers the second  
call.)  
To switch back to the first caller, press  
again.  
Tip: For those calls where you don’t want to be interrupted, you can  
temporarily disable Call Waiting by pressing  
before placing  
your call. Call Waiting is automatically reactivated once you end the call.  
Note: You don’t have to worry about being interrupted during a wireless  
Internet call because Call Waiting and Three-Way Calling are  
automatically disabled.  
Section 7  
48  
Using Service Features  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Three-Way Calling  
With Three-Way Calling, you can talk to two different people at the same  
time. When using this feature, the normal airtime rates will be charged  
for each of the two calls.  
1. During a conversation, press  
.
2. Enter the number for the third party, and press  
3. When you are connected to the third party, press  
begin your Three-Way call.  
.
once again to  
If one of the people you called hangs up, you and the remaining caller  
stay connected. If you initiated the call and are the first to hang up, all  
three callers are disconnected.  
Tip: You can also begin a Three-Way Call while on an existing call by  
displaying a phone number stored in your Internal Phone Book or  
Call History. Highlight the desired number and press  
. Once the party  
answers, press  
again to connect all parties together.  
Forwarding Your Calls  
Call Forwarding lets you forward all your incoming calls to another  
phone number – even when your phone is turned off. You can continue  
to make calls from your phone with Call Forwarding activated.  
To Activate Call Forwarding:  
1. Press  
.
2. Enter the area code and phone number to which your calls should  
be forwarded.  
3. Press . You will hear a tone confirming the activation of  
Call Forwarding.  
To Deactivate Call Forwarding:  
Press  
.
Press . You hear a tone to confirm the deactivation.  
Note: You are charged a higher rate for calls you have forwarded.  
Section 7  
Using Service Features 49  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
50  
Download from Www.Somanuals.com. All Manuals Search And Download.  
8
Managing Call History  
In This Section  
Viewing Call History (Incoming, Outgoing and Missed)  
Call History Options  
Making a Call From Call History  
Saving a Phone Number From Call History  
Erasing Call History  
he Call History helps you manage your time more effectively. It keeps  
track of incoming calls, calls made from your phone and missed calls.  
This section guides you through accessing and making the most of your  
Call History.  
T
Section 8  
Managing Call History 51  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Viewing Call History (Incoming, Outgoing and Missed)  
You’ll find your Call History invaluable. It is a list of the last 10 phone  
numbers or Internal Phone Book entries for calls you placed, received or  
missed. Call History makes redialing a number fast and easy. It is  
continually updated as new numbers are added to the beginning of the  
list and the oldest entries are removed from the bottom of the list.  
Each entry contains the phone number (if it is available) and Internal  
Phone Book entry name (if the phone number is in your Internal Phone  
Book). Duplicate calls (same number and type of call) may only appear  
once on the list.  
To view a Call History entry:  
1. Press for Main Menu.  
2. Press  
for Call History.  
3. Press  
for Outgoing,  
for Incoming, and  
for Missed.  
Call History Options  
For additional information and options on a particular call, highlight a  
Call History entry and press followed by to view these options.  
This feature gives you the option of selecting:  
Talk to call the phone number.  
Save to save the sender’s phone number (if the number is not  
already stored in your Internal Phone Book). For more information  
Prepend to add numbers to the beginning of the phone number.  
(For more information see "Prepending a Phone Number From Call  
Section 8  
52  
Managing Call History  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Making a Call From Call History  
To place a call from Call History:  
1. Scroll to highlight the required number and press  
the call.  
to complete  
Note: You cannot make calls from Call History to entries identified as  
No ID or Restricted. Calls labeled Data or Fax can only be dialed through a  
personal computer.  
Prepending a Phone Number From Call History  
If you need to make a call from Call History and you happen to be  
outside your local area code, you can add the appropriate prefix by  
following these steps:  
1. Press for Main Menu.  
2. Press  
for Call History.  
3. Press  
for Outgoing, press  
for Incoming, or press  
for Missed.  
4. When the call list displays, scroll to highlight the desired call log,  
and press  
5. Press for Menu options.  
6. Press to Prepend.  
.
7. Enter the appropriate digits to prepend, and press  
to  
be connected.  
Section 8  
Managing Call History 53  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Saving a Phone Number From Call History  
Your phone can store up to 250 Internal Phone Book numbers.  
Phone Book entries can store up to a total of 6 phone numbers and the  
entry’s name can contain 12 characters.  
To save a phone number from Call History:  
1. Press for Main Menu.  
2. Press  
for Call History.  
3. Press  
for Outgoing, press  
for Incoming, or press  
for Missed.  
4. Scroll to highlight the phone number and press  
.
5. Press for Menu options.  
6. Press  
to save.  
7. Follow the prompts to complete storing the number to your Internal  
Phone Book.  
Note: You cannot save phone numbers already in your Internal Phone  
Book or from calls identified as No ID or Restricted.  
Erasing Call History  
To erase a Call History or all Call Histories:  
1. From standby mode press to open the Main Menu.  
2. Press  
for Call History.  
3. Press  
for Erase History. This opens the Erase History menu.  
Scroll to highlight one of the options:  
Outgoing, Incoming, Missed and All Calls.  
4. Press  
to erase the calls within the selected option and follow the  
to return to the previous menu.  
prompts, or press  
Section 8  
54  
Managing Call History  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
9
Managing Messaging  
In This Section  
Message Types  
New Message Alerts  
Message Options  
our phone is always working to help you stay connected – even when  
you’re unavailable. With two types of messaging, you can depend on  
being notified of important information. This section steps you through the  
messaging functions available on your phone.  
Y
Section 9  
Managing Messaging 55  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Setting Up Voicemail  
The first thing you’ll want to do after activating your phone is set up  
your voicemail.  
Knowing When You Have Messages  
There are several ways your phone alerts you of new messages:  
By displaying a message on the screen.  
By displaying  
on the external LCD screen when the flip  
is closed.  
By playing the assigned ringer type.  
By the LED blinking red.  
By displaying  
at the top of your screen for voicemail messages  
or text messages.  
Message Types  
There are two types of messaging features available from your phone’s  
menu. You can receive voicemail and text messages as long as your  
phone has enough memory to store them. If the memory is full, you will  
be prompted to delete old messages to make room.  
Voicemail automatically captures calls when you can’t answer your  
phone or it is turned off. The voicemail system sends a notification to  
your phone when you have new voice messages or numeric pages.  
Text Messages let you know when you receive numeric pages. (For  
Section 9  
56  
Managing Messaging  
Download from Www.Somanuals.com. All Manuals Search And Download.  
           
New Voicemail Message Alerts  
When you receive a new voicemail message, your phone alerts you and  
displays  
.
Important: When you are roaming off the network, you may not receive  
notification of new voicemail messages. It is recommended that you  
periodically check your voicemail by dialing 1 + area code + your phone  
number. When your voicemail box answers, press  
pass code.  
and enter your  
Note: Your phone accepts messages even when it is turned off. However,  
you are only notified of new messages when your phone is turned on and  
you are in a network service area.  
Retrieving Your Voicemail Messages  
You can review your messages directly from your phone or from any  
other touch-tone phone. To dial from your phone, you can either press  
and hold for two seconds or use the menu keys.  
Using One-Touch Message Access:  
Press and hold . Follow the system prompts.  
Using the Menu Keys on Your Phone to Access your Messages:  
for Main Menu.  
1. From standby mode, press  
2. Press  
for Voice Mail.  
3. Press  
to Listen.  
Note: You are charged for airtime minutes when you are accessing your  
voicemail from your phone.  
Using a Phone Other Than Your Wireless Phone to Access  
Your Messages:  
1. Dial your phone number.  
2. When your voicemail box answers, press  
.
3. Enter your pass code.  
Section 9  
Managing Messaging 57  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
Clearing the Voicemail Message Icon  
Your phone may temporarily continue to display the icon after you have  
checked your voicemail messages.  
To clear the icon from the display screen:  
1. From standby mode, press  
for Main Menu.  
2. Press  
for Voice Mail.  
3. Press  
to Reset.  
Sending Text Messages  
Numeric Pages  
Callers can send a numeric page to your phone when they reach your  
voicemail box. Numeric paging to a phone comes at no additional charge.  
Note: The numeric paging option for your phone must be turned on for  
your phone to receive pages. This option can be set by entering your  
voicemail feature options.  
New Text Messages  
When you receive a new text message, your phone notifies you.  
Press to Read the message.  
Text Message Storage  
Your phone can store up to 94 Web Messages. Each time you receive a  
new message, the amount of memory is decreased. The full memory  
percentage is updated instantly and displayed on the screen.  
Section 9  
58  
Managing Messaging  
Download from Www.Somanuals.com. All Manuals Search And Download.  
           
Text Message Options  
After you display a numeric page or text message, press to display the  
numeric page or text message options. To select an option, scroll to  
highlight it and press  
.
Talk - Calls the highlighted phone number.  
Save # - Saves the sender’s phone number if it is not already in your  
Internal Phone Book (if applicable).  
Erase - Erases the current numeric page or text message.  
Next Msg - Moves forward to the next message.  
Prev Msg - Returns to the previous message.  
Extract #s - Extracts the phone numbers (if there are numbers  
contained in the text message). (For further information see  
Extracting Phone Numbers from a Text Message  
After you display a text message, press to display message options.  
To extract a phone number contained in the message:  
1. Highlight Extract #s and press . All the phone numbers  
contained in the message are displayed.  
2. Highlight the number you want to extract and press  
.
The following options are displayed:  
Call to dial the extracted phone number  
Save Phone to save the extracted phone number to the Internal  
Phone Book.  
3. Scroll to select your option and press to continue.  
Note: If the message icon continues to display in standby mode, a new or  
unread message exists in another category.  
Section 9  
Managing Messaging 59  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
60  
Download from Www.Somanuals.com. All Manuals Search And Download.  
10  
Using Your Internal Phone Book  
In This Section  
Finding Internal Phone Book Entries  
Internal Phone Book Entry Options  
Adding a Phone Number to an Internal Phone Book Entry  
Editing an Internal Phone Book Entry  
ow you know the basics that help make it easier to stay in touch with  
N
people and information. This section helps you make the most of your  
contacts and use your time more effectively when you’re trying to connect  
with the important people in your life.  
Section 10  
Using Your Internal Phone Book 61  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Finding Internal Phone Book Entries  
There are several ways to display your Internal Phone Book entries.  
Follow the steps outlined in the sections below to display entries from the  
Internal Phone Book menu.  
Finding Names  
You can review all the entries stored in your Internal Phone Book or find  
an entry quickly by following these simple steps:  
1. From standby mode, press  
for Main Menu.  
2. Press  
3. Press  
for Phone Book.  
for Find Name. The list of names is displayed in  
alphabetical order.(The Speed Dial number displays next to  
the entry.)  
4. Enter the first letter of the person’s name you want to find. Use the  
Navigation key to scroll through the list of possible matches.  
Additional letters may be entered to narrow the name matches.  
Finding Entries  
To find an Internal Phone Book entry by its entry number:  
1. From standby mode, press  
for Main Menu.  
2. Press  
for Phone Book.  
3. Press  
for Find Entry. The list of names is displayed in numeric  
order of the Speed Dial number  
Internal Phone Book Entry Options  
When you display an Internal Phone Book entry, the following options  
are displayed. To select an option, highlight it and press  
.
Talk to call the current phone number.  
Add Phone# to add a phone number.  
Edit to edit the current entry.  
Prepend to add numbers at the beginning of an existing  
phone number.  
Erase to erase the current entry.  
Section 10  
62  
Using Your Internal Phone Book  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
Adding a Phone Number to an Internal Phone Book Entry  
To add a phone number to an entry:  
1. From standby mode, press  
for Main Menu.  
2. Press  
3. Press  
for Phone Book.  
for Find Name. The list of names is displayed in  
alphabetical order. (The Speed Dial number displays next to  
the entry.)  
4. When the desired name is found, highlight it and press  
5. Press and press  
6. Enter the new number using the keypad and press  
7. Select the desired Label and press  
8. Press to save the entry and return to standby mode.  
.
for Add Phone #.  
.
.
Note: Phone numbers labeled Fax or Data can only be dialed through a  
personal computer.  
Editing an Internal Phone Book Entry  
To make changes to an entry:  
1. From standby mode, press  
for Main Menu.  
2. Press  
3. Select either  
for Phone Book.  
for Find Name, or  
for Find Entry.  
4. When the desired name is found, highlight it and press  
.
5. Press for Menu options.  
6. Press  
for Edit.  
To select an option, highlight it and press  
.
Entry is the memory location of the phone book entry. There are 250  
memory locations available.  
Speed Dial allows you to choose which number saved in a  
particular entry will be the Speed Dial number. Only one number per  
entry can be set to Speed Dial.  
Secret hides the phone number and user information from  
displaying on the screen. Instead, Secret is displayed.  
Note: These numbers can still be dialed, but the name & number will  
be hidden.  
Section 10  
Using Your Internal Phone Book 63  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Home is used as a label when you save a home number.  
Work is used as a label when you save a work number.  
Mobile is used as a label when you save a mobile number.  
Pager is used as a label when you save a pager number.  
Fax is used as a label when you save a fax number.  
No Label is used when you save a number that does not conform to  
one of the other labels.  
Group is used to save the phone book entry into a group. The default  
groups are: No Group, Friend, Family, Colleague, or VIP.  
Name Ringer is used to designate a specific ringer sound when you  
receive a call from the number saved in the phone book.  
Note: “Default” means the global ringer selected for all incoming calls will  
be played.  
My Phone Number  
To display your phone number:  
1. From standby mode, press  
for Main Menu.  
2. Press  
for Phone Book.  
3. Press  
for My Phone#.  
Section 10  
64  
Using Your Internal Phone Book  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
11  
Changing Your Phone’s Settings  
In This Section  
Changing the Greeting  
Adjusting the Volume  
Ringer Types  
Selecting Ringer Types  
Changing the Backlight and Contrast Setting  
Data/Fax Mode  
his section describes how you can change your phone’s settings to best  
suit your requirements. Take a few moments to review these options  
and add or adjust the settings that are right for you.  
T
Section 11  
Changing Your Phone’s Settings 65  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Changing the Greeting  
The greeting can be up to 16 characters and is displayed on the first line  
of your phone’s display screen in standby mode.  
To change your greeting:  
1. From standby mode, press  
for Main Menu.  
2. Press  
3. Press  
4. Press  
5. Press  
for Setup/Tool.  
for Display.  
for Greeting.  
for at least two seconds to erase the existing greeting.  
6. Press to display the text entry modes. Highlight the desired mode  
and press to select.  
7. Type in the new greeting and press  
.
Setting the Language of your Phone  
Your phone can display all menus and messages in either Spanish or  
English; all verbal prompts will also be spoken by the phone in the  
selected language. It’s quick, easy and very convenient for bilingual  
families or friends. To change the language of your phone:  
1. From the Main Menu press  
2. Press for Language.  
for Setup/Tool.  
3. Scroll to highlight English or Spanish.  
4. When the desired option displays, press  
.
Adjusting the Ringer Volume  
To adjust the ringer volume:  
1. From standby mode, press  
for Main Menu.  
2. Press  
3. Press  
for Sounds.  
for Ringer Volume. The following options display: Calls,  
Messages and Alarms.  
4. Select the desired option and press  
.
5. Scroll to the desired Ringer Volume, and press  
.
Tip: You can use the volume control keys located on the side of the phone  
to adjust the ringer volume in standby mode with the flip open or the voice  
volume during a call.  
Section 11  
66  
Changing Your Phone’s Settings  
Download from Www.Somanuals.com. All Manuals Search And Download.  
           
Ringer Types  
Ringer types help you identify incoming calls and messages. You can  
assign Ringer Types to individual Internal Phone Book entries, calls and  
messages.  
Preprogrammed Ringers include a variety of standard ringer  
types and familiar music.  
Vibrating Ringer alerts you to calls or messages without  
disturbing others.  
Selecting Ringer Types for Voice Calls  
To select a ringer type for voice calls:  
1. From standby mode, press  
for Main Menu.  
2. Press  
3. Press  
4. Press  
for Sounds.  
for Ringer Type.  
for Voice Calls.  
5. Select either with Caller ID or no Caller ID, and press  
6. Listen to the available Ringer Types and press  
.
to select.  
Tip: If your ringer is set to vibrate or Off, you can review the ringer types  
but will not hear them.  
Selecting Ringer Types for Messages  
To select a ringer type for messages:  
1. From standby mode, press  
for Main Menu.  
2. Press  
3. Press  
4. Press  
for Sounds.  
for Ringer Type.  
for Messages.  
5. Select Voice Mail, Page, Text, or Web Alerts and press  
6. Listen to the available Ringer Types and press  
.
to select.  
Section 11  
Changing Your Phone’s Settings 67  
Download from Www.Somanuals.com. All Manuals Search And Download.  
           
Selecting Ringer Types for Alarms  
To select a ringer type for alarms:  
1. From standby mode, press  
for Main Menu.  
2. Press  
3. Press  
4. Press  
for Sounds.  
for Ringer Type.  
for Alarms.  
5. Listen to the available Ringer Types, and press  
to select.  
to select.  
Selecting Ringer Types for Data / Fax In  
To select a ringer type for data/fax in:  
1. From standby mode, press  
for Main Menu.  
2. Press  
3. Press  
4. Press  
for Sounds.  
for Ringer Type.  
for Data/Fax In.  
5. Listen to the available Ringer Types, and press  
Changing the Backlight Time Length  
The backlight setting lets you select how long the display screen and  
keypad are backlit after any key press is made.  
To change the backlight setting:  
1. From standby mode, press  
for Main Menu.  
2. Press  
3. Press  
4. Press  
for Setup/Tool.  
for Display.  
for Backlight.  
5. Select from the following options:  
Flip Open  
30 Seconds  
8 Seconds  
Off  
6. Press  
to save and exit.  
Note: Long backlight settings affect the battery’s talk and standby times.  
Section 11  
68  
Changing Your Phone’s Settings  
Download from Www.Somanuals.com. All Manuals Search And Download.  
           
Connect Alert  
Your phone has the ability of sounding a ring tone alert whenever a call  
is connected. To setup this option:  
1. From standby mode, press  
for Main Menu.  
2. Press  
3. Press  
4. Press  
for Sounds.  
for Alerts.  
for Connect.  
5. Highlight On or Off using the navigation key. Press  
to save.  
Disconnect Alert  
Your phone has the ability to sound a disconnect alert tone when the  
other caller completes the call and hangs up. To setup this option:  
1. From standby mode, press  
for Main Menu.  
2. Press  
3. Press  
4. Press  
for Sounds.  
for Alerts.  
for Disconnect.  
5. Highlight On or Off using the navigation key. Press  
to save.  
Changing the Contrast  
To adjust the contrast on the phone’s display:  
1. From standby mode, press  
for Main Menu.  
2. Press  
3. Press  
4. Press  
for Setup/Tool.  
for Display.  
for Contrast.  
5. Select a setting from Lowest, Low, MED, High, or Highest and  
press to select.  
Section 11  
Changing Your Phone’s Settings 69  
Download from Www.Somanuals.com. All Manuals Search And Download.  
           
Data/Fax Mode  
The wireless data connection materials (purchased separately) lets  
you link your laptop PC to your phone so you can send and receive data  
and faxes.  
Tip: The phone must be on a digital network to send or receive data and faxes.  
Receiving a Fax  
To receive a fax with your phone:  
1. Make sure that your phone is connected to your computing device  
and is powered “On.”  
2. From standby mode, press  
for Main Menu.  
for Wireless Web.  
for Connection.  
3. Press  
4. Press  
5. Using the Navigation key, select Data/Fax In Incoming Fax only  
and press to select. (Notice that the phone displays “No  
incoming voice calls can be received”. Your phone returns to  
standby mode and displays *Fax Only*.)  
Receiving Data  
To receive data with your phone:  
1. Make sure that your phone is connected to your computing device  
and is powered “On.”  
2. From standby mode, press  
for Main Menu.  
for Wireless Web.  
for Connection.  
3. Press  
4. Press  
5. Select Data/Fax In Incoming Data only and press . (Notice that  
the phone displays “No incoming voice calls can be received”.  
Your phone returns to standby mode and displays *Data Only*.)  
Section 11  
70  
Changing Your Phone’s Settings  
Download from Www.Somanuals.com. All Manuals Search And Download.  
           
Returning to Voice Mode  
To return to standby mode from Data/Fax mode:  
1. Make sure that your phone is connected to your computing device  
and is powered “On.”  
2. From standby mode, press  
for Main Menu.  
for Wireless Web.  
for Connection.  
3. Press  
4. Press  
5. Select Data/Fax Off: Voice Only and press . (Notice that the  
phone displays “No incoming data/fax calls can be received”.  
Your phone returns to standby mode.)  
Note: The phone always powers up in standby mode, even if it was  
powered down in Data/Fax mode. The phone also returns to standby mode  
if the data cable is disconnected.  
Section 11  
Changing Your Phone’s Settings 71  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
72  
Download from Www.Somanuals.com. All Manuals Search And Download.  
12  
Setting Your Phone’s Security  
In This Section  
Accessing the Security Menu  
Locking Your Phone  
Unlocking Your Phone  
Using Special Numbers  
y using the security setting on your phone, you receive peace of mind  
without sacrificing flexibility. With several options available, you can  
customize your phone to meet your personal needs.  
B
Section 12  
Setting Your Phone’s Security 73  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Accessing the Security Menu  
You must enter your lock code to view the Security menu. If you forget  
your lock code, try using the last four digits of your Social Security  
number or the last four digits of your phone number or try 0000.  
To access the Security menu:  
1. From standby mode, press  
for Main Menu.  
2. Press  
for Setup/Tools.  
3. Press  
for Security.  
4. Enter your lock code, and the Security menu displays.  
Locking Your Phone  
When your phone is locked, you can only receive incoming calls or make  
calls to 911 or special numbers.  
To lock your phone:  
1. Access the Security menu.  
2. Press  
for Lock Phone. The available options are:  
Unlocked  
On Power Up  
Lock Now  
3. Select Lock Now and press  
.
Unlocking Your Phone  
To unlock your phone:  
1. Press  
.
2. Enter your lock code.  
Tip: If you can’t recall your lock code, try using the last four digits of either  
your Social Security number or phone number or try 0000. If none of these  
work, call your wireless service provider.  
Section 12  
74  
Setting Your Phone’s Security  
Download from Www.Somanuals.com. All Manuals Search And Download.  
             
Changing the Lock Code  
To change your lock code:  
1. Access the Security menu.  
2. Press  
for Change Lock. Your Lock Code number displays.  
3. Enter a new Lock Code number (this will override your original  
lock code number), and press  
.
Calling in Lock Mode  
You can place calls to 911 and to your special numbers when in  
lock mode.  
To place an outgoing call in lock mode:  
To call an emergency number or special number, enter the phone  
number and press  
.
To place normal outgoing calls. Press to display the lock code  
screen, enter the lock code. Enter the phone number, and press  
to complete the call.  
Using Special Numbers  
You can hide up to three phone numbers that require your lock code to  
make them “special.”  
All three special numbers can be manually dialed at any time, even when  
your phone is locked.  
To make a number special:  
1. From standby mode, press  
for Main Menu.  
2. Press  
for Setup/Tool.  
3. Press  
for Security.  
4. Enter the phone’s lock code, the Security menu displays.  
5. Press for Special #.  
6. Select an available space and press , or just enter the space’s  
number. Enter the phone number, and press  
.
Section 12  
Setting Your Phone’s Security 75  
Download from Www.Somanuals.com. All Manuals Search And Download.  
           
Erasing Special Numbers  
To erase a special number:  
1. Access the Security menu.  
2. Press  
3. Select the number that you wish to erase, and press  
4. Press to erase the number, and press  
for Special #.  
.
.
Erasing the Internal Phone Book  
You can erase all the numbers stored in your Internal Phone Book.  
This is useful if you want to loan, or give your phone to a friend or  
family member.  
To erase your Internal Phone Book:  
1. Access the Security menu.  
2. Press  
for Erase PBook.  
3. Using the Navigation key, select Yes.  
If you do not wish to erase your Internal Phone Book, select No and press  
to return to the previous menu.  
Resetting Your Phone  
Resetting your phone returns all setup options to the factory’s default  
settings. All of your important personal data (Internal Phone Book, Voice  
Recordings), are unaffected by resetting your phone.  
To reset your phone:  
1. Access the Security menu.  
2. Press  
for Reset Phone.  
3. Select Yes and press  
.
4. Select Yes again and press  
to confirm and reset the phone to the  
factory defaults.  
The phone reboots (turns itself off and back On), restores the default  
settings, such as ringers, erases your messages and then returns to  
standby mode.  
Section 12  
76  
Setting Your Phone’s Security  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
13  
Personal Information  
Management  
In This Section  
Accessing the Scheduler  
Event Alerts  
Adding New Events  
Alarm Clock  
our phone has been equipped with several personal information  
management features to help you manage your busy lifestyle. These  
features turn your phone into a time management planner that helps you  
keep up with your contacts, schedules and commitments. It takes  
productivity to a whole new level.  
Y
Section 13  
Personal Information Management 77  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Accessing the Scheduler  
Your scheduler helps organize your time and reminds you of  
important events.  
How To Access Your Scheduler  
1. From standby mode, press  
2. Press  
3. Scroll to highlight an option. The available options are:  
for Main Menu.  
for Calendar.  
Today  
Month View  
Jump To Date  
Task List  
Countdown  
Alarm Clock  
Set Time  
4. Press  
to open the selected option.  
Calendar  
Calendar functions allow you to schedule personal events and view them  
in an easily read calendar format. These functions are also available to  
you when you are talking on your phone.  
Today  
Allows you to schedule events for today, that will automatically appear on  
your “Today” events schedule for that day. You can schedule up to nine  
events for the current day with each event’s start and end time. You can  
even have your phone alert you before an event starts.  
Section 13  
78  
Personal Information Management  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
Month View  
Month View allows you to view a calendar of the current month, a past  
month, or a future month. In Month View, the current date is highlighted  
on the calendar. Days with scheduled events are *underlined*. When in  
Month View, the navigation keys work like this:  
Moving the scroll left or right allows the calendar to be moved  
backward or forward a day.  
Moving the scroll up or down moves the calendar by one week.  
Pressing the volume keys up or down allows the calendar to move  
month to month.  
Jump To Date  
Jump To Date allows you to specify the calendar date you want to view.  
Arriving at the desired date, you can enter, edit, and/or erase events in  
your calendar.  
Task List  
Allows you to compile a list of items to be completed. Your phone can  
store and manage 20 “Task List” items.  
Countdown  
Countdown allows you to find out how much time will elapse between  
the time entered and an event scheduled.  
Press the correct volume key to scroll between A.M. or P.M. or press  
for A.M., or for P.M.  
Countdowns can be entered for dates between the years 1980 and 2099.  
Alarm Clock  
Your phone has an alarm clock with three separate alarms. Each alarm  
can be set once, or daily at a programmed time.  
Section 13  
Personal Information Management 79  
Download from Www.Somanuals.com. All Manuals Search And Download.  
                     
Set Time  
Your phone keeps the time and date directly from the network system  
while inside the network service area. If you roam outside the network  
service area, or turn on your phone in an analog roaming area, you’ll  
need to set the time manually.  
When you turn on your phone in Analog Mode you will be prompted to  
enter the current date and time. Press the appropriate keys to enter the  
correct date and time in a numeric mode. Time is represented as hh:mm  
A/P and the date is represented as 00/00/0000.  
To Set Time using the menu options  
1. From standby mode, press  
for Main Menu.  
2. Press  
for Calendar.  
3. Press  
for Set Time.  
Tip: Use the numeric keys to enter the current time and date.  
Adding New Events  
1. From standby mode, press  
for Main Menu.  
2. Press  
3. Press  
4. Press  
for Calendar.  
for Today.  
for input mode options T9 (English), Alpha, Symbol, and  
Number. Select an option and press  
to activate.  
5. Enter the event’s title or name information. You can enter up to 32  
characters. For more information on Text and Symbol Entry refer to  
mode is T9 (English).  
6. Press  
7. Enter the start time and move the scroll key down once to move to  
the date field. Enter the date, and press  
to continue to the Next Step.  
.
8. Enter the end time and move the scroll key down once to move to the  
date field. Enter the date if different from what is shown, and press  
9. Scroll to select the alarm option of choice, and press . The  
options are: 10 minutes Before, On time, No Alarm, 1 hour  
Before, or 30 minutes Before.  
.
Section 13  
80  
Personal Information Management  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
10. Press  
.
Notice the heading “Event” at the top of the display screen. This  
informs you of how many events you have scheduled for the day and  
the number of the event you are displaying.  
Tip: Use the volume control keys to scroll by month through the Calendar,  
or scroll up or down to view by week.  
11. Press and hold  
to return to the Month View.  
Viewing an Event  
The Event screen displays the number of events listed for the current day.  
Scroll through the other events. If no events are scheduled, you will be  
prompted to add a new event.  
Editing an Event  
1. From standby mode, press  
for Main Menu.  
2. Press  
for Calendar.  
3. Press  
for Today.  
4. Select an existing event, and press  
.
5. Press to edit that event, and continue to press  
until the  
information you want to edit displays. Enter the new information  
over the old, then press . (If you are editing an alarm, scroll to  
the “New” option.)  
6. Press  
7. Press  
until storing displays.  
to return to the Calendar.  
Erasing an Event  
1. From standby mode, press  
for Main Menu.  
2. Press  
for Calendar.  
3. Press  
for Today.  
4. Scroll to highlight an existing event, press  
and press  
, to  
erase. You are given the option to enter a new event. If you do not  
wish to enter a new event, press and hold  
to return to the  
Month View.  
Section 13  
Personal Information Management 81  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Alarm Clock  
Note: Default alarm times are 10 minutes for Meetings, Events and  
Dining Appointments, 24 hours for Special Occasions and zero minutes for  
Call Alarms.  
Your phone has an Alarm Clock feature with three separate alarms. Each  
alarm can be set once, or daily at a programmed time of your choosing.  
To set the Alarm Clock:  
1. From standby mode, press  
for Main Menu.  
2. Press  
for Calendar.  
3. Press  
for Alarm Clock.  
4. Scroll to highlight Alarm #1, #2, or #3, and press , or select the  
number next to desired alarm.  
5. Select Daily, Once or Reset for the alarm, and press  
6. Enter the date and time for the alarm. Use the volume keys on the  
side of the phone to select AM. or P.M., or press for A.M., or  
for P.M. Note that no date setting is available for a Daily  
alarm.  
7. Press  
.
.
Erasing a Programmed Alarm  
1. Repeat steps 1 through 3 above.  
2. Scroll to highlight the Alarm# you wish to set and press . The  
following options display: Daily, Once or Reset.  
3. Use the navigation key to select Reset.  
Section 13  
82  
Personal Information Management  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
14  
Using the Voice Services of  
Your Phone  
In This Section  
Using Voice-Activated Dialing  
Programming the Phone for Voice Dialing  
Place a Call Using Voice Dial  
his section explains the features associated with your phone’s  
T
Voice Services. The easy-to-follow instructions explain how to make  
calls or go to a menu by simply speaking a command.  
Section 14  
Using the Voice Services of Your Phone 83  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Using Voice-Activated Dialing  
Your phone features voice-activated dialing. You can call up to 10 stored  
entries by speaking the individual’s or company’s name into the  
microphone. Using the voice-activated dialing option requires that you  
first program the phone to recognize the name of the individual or  
company you are calling.  
Tips on recording names  
Avoid recording similar names phonetically. If you record a name  
similar to one that is already stored in a voice-dial memory, the  
phone requests another name.  
Avoid recording in a noisy place.  
Speak clearly and naturally.  
Avoid very long or very short names. Names with two to five syllables  
are recommended.  
If a voice dial entry does not properly connect, you may need to  
record the name and number again.  
Note: Record Voice Dial tags in a quiet environment and without the aid of  
an accessory (for example, a headset or hands-free car kit).  
Programming the Phone for Voice Dialing  
Programming your phone for voice activated dialing is easy. The phone  
provides voice prompts and screen displays to guide you through the  
recording process. To program the phone for voice activated dialing:  
1. From the Main Menu press  
2. Press for Record. The phone will prompt you to say the name  
you want to program.  
for Voice Dial.  
3. Wait for the beep and then say the name. For best results, use names  
with at least two syllables, or use both a first and last name. The  
phone stores the name as a “first” sample, and then prompts you to  
say the name again.  
4. Respond to the prompt by repeating the name after the beep exactly  
as you did the first time. The phone stores the name as a second  
sample and then requests the phone number.  
5. Enter the phone number on the keypad.  
Section 14  
84  
Using the Voice Services of Your Phone  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
6. To store the phone number, press . The number you entered  
displays, along with the notification ‘Recorded’. If the number you  
entered matches a name/number already stored in your Internal  
Phone Book, then the name also displays.  
7. The screen then returns to the Voice Dial menu.  
Setting Up Voice Dial  
Voice Dial is always active once you have programmed the phone with  
Voice Dial entries. To place voice activated calls, press and hold  
.
Then say the name into the phone after you hear the voice prompt and  
the beep.  
You can also initiate a voice activated call by opening the flip, when this  
feature is activated.  
To change the Voice Dial setup options:  
1. From the Main Menu press  
2. Press for Set Active.  
for Voice Dial.  
3. Press the Navigation key up or down to scroll between the  
following options:  
TALK Only Enables voice dialing by pressing and holding  
TALK / Flip Enables voice dialing by pressing and holding  
(when the phone is open), or by simply opening the phone’s  
flip cover.  
.
4. Select the desired option and press  
.
Section 14  
Using the Voice Services of Your Phone 85  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Placing a Call Using Voice Dial  
To place a call if Voice Dial is inactive:  
1. Open the phone.  
2. Press and hold down the  
key.  
3. At the voice prompt, say the name into the phone.  
The phone automatically places the call if it recognizes the name.  
If the phone does not recognize the name, it says Who would you  
like to call? again and prompts Locating Name.  
If the phone is unable to recognize the name after two attempts, it  
says The name cannot be recognized and prompts Cannot  
recognize name. Please check name. The phone returns  
automatically to standby mode, and you can try the call again later.  
Reviewing Voice Dial Entries  
To review Voice Dial entries:  
1. From the Main Menu press  
for Voice Dial.  
2. Press  
for Review. A list of your stored voice dial  
numbers displays (the names also display if stored in the Internal  
Phone Book).  
3. Press the associated key to select the desired entry, or scroll to the  
desired entry and press . The recorded name plays audibly. You  
can scroll through entries without having to listen to each one, or  
you can listen to them all as they play in order.  
4. Press  
to return to the previous screen.  
Section 14  
86  
Using the Voice Services of Your Phone  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Erasing Voice Dial Entries  
To erase an individual Voice Dial entry:  
1. From the Main Menu press  
for Voice Dial.  
2. Press  
for Review. A list of entries are displayed.  
3. Press the associated key to select the desired entry, or scroll to  
highlight the desired entry, and press . The recorded name plays  
audibly and you are prompted with “OK: Erase”.  
4. Press  
5. Press the navigation key left or right to highlight “Yes” or “No”.  
6. Press  
to Erase that entry.  
.
To erase all Voice Dial entries:  
1. From the Main Menu press  
for Voice Dial.  
2. Press  
a confirmation voice prompt.  
3. Press to Erase all Voice Dial entries or  
previous screen.  
for Erase All. You are given a confirmation screen and  
to return to the  
Section 14  
Using the Voice Services of Your Phone 87  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
88  
Download from Www.Somanuals.com. All Manuals Search And Download.  
15  
Experiencing the  
Wireless Internet  
In This Section  
Launching and Using the Wireless Internet Browser  
Creating and Finding Bookmarks  
Troubleshooting  
Setting Up a Wireless Data Connection  
y now you’ve discovered the great features that come with your phone.  
Now it’s time to experience the wireless Internet. Let the adventure begin.  
B
Section 15  
Experiencing the Wireless Internet 89  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
The Wireless Internet  
With the wireless Internet and your wireless Internet-ready phone, you  
have access to many features:  
The Wireless Internet Browser allows you to view specially-  
designed versions of popular Internet sites.  
The Wireless Data Connection lets you connect to the Internet or  
your company's network with a laptop PC or handheld computing  
device and the wireless data connection materials.  
Note: Wireless Internet service will not work when roaming off the  
network and may not be available in select affiliate areas.  
The Wireless Internet Browser  
Your phone comes equipped with a Browser, which allows you to access  
up-to-the minute information through the wireless Internet.  
You can view specially-designed versions of popular Internet sites.  
Browsing the wireless Internet using your phone is different than using a  
home computer because sites display specialized text and reduce  
their graphics.  
The Browser connects to the Internet by placing a call. Note that  
appears on the display whenever a call is in progress, just as with a  
regular voice call. Service charges vary depending on your service option.  
Launching the Wireless Internet Browser  
To launch the wireless Internet Browser:  
1. Press  
2. Press  
3. Press  
for Main Menu.  
for Wireless Web.  
for Start Browser. Phone prompt states: “Charges will  
apply to Browser calls. Start Wireless Web?”  
Or:  
Press  
to launch the MiniBrowser or from standby mode.  
The first time you use the Browser, you'll be prompted to enable the  
security feature. This automatic process will take 3–6 minutes to  
complete and it occurs just once. When the process is complete, you're  
ready to start using the wireless Internet.  
Section 15  
90  
Experiencing the Wireless Internet  
Download from Www.Somanuals.com. All Manuals Search And Download.  
           
Following the security setup, you'll see the wireless Internet Home Page.  
This is the main page for the Browser and it gives you access to all the  
sites in the wireless Internet. The next time you use the Browser, you may  
not see the home page at first because the Browser will display the page  
you were viewing when you last exited the Browser.  
WIRELESS WEB  
1 Bookmarks  
2 Web Portals  
3 Entertainment  
4 Finance  
5 Sports  
6 News & Weather  
7 Shopping  
PAGE 2  
1 People  
2 Business Tools  
3 CNN  
4 Bloomberg  
5 ESPN.com  
6 eBay  
7 The Weather  
Channel  
8 Travel  
9 Tools & Reference  
More...  
8 Go To...  
OK  
MENU  
OK  
MENU  
The Wireless Internet Home Page  
Note: The wireless Internet Home Page is subject to change.  
You may notice that sometimes the Browser will launch without placing  
a call. This is because the phone stores recently viewed pages in its  
memory cache. The Browser will connect automatically when you access  
a page that's not stored in the cache. This reduces the wireless Internet  
usage times.  
Section 15  
Experiencing the Wireless Internet 91  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
If the phone has been inactive for a while and a new wireless Internet site  
has not been requested, the Browser will automatically disconnect. The  
Browser will remain active – only the connection will end. The Browser  
will automatically reconnect when you go to a wireless Internet site that's  
not stored in the phone's memory cache. For this reason, you may find  
that you are billed for several network connections within a single  
session. This is normal and is designed to minimize airtime charges.  
When launching the Browser, you may need to take an extra step or see a  
reminder that Browser calls will be charged. (See “Web Guard” below for  
more information.)  
Web Guard  
The Web Guard requires you to take an extra step each time you launch  
or exit the Browser. To change the Web Guard setting:  
1. Press  
2. Press  
3. Press  
for Main Menu.  
for Wireless Web.  
Web Guard.  
4. The following options are displayed:  
None to disable the Web Guard  
To Start to require an extra step when launching the Browser.  
To End to require an extra step when exiting the Browser.  
Both to require an extra step when launching and when exiting  
the Browser.  
5. Select the desired choice and press  
.
Section 15  
92  
Experiencing the Wireless Internet  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Using the Wireless Internet Browser  
Using the Browser is easy once you've learned a few basics. Here are some  
tips for navigating the wireless Internet:  
Scrolling  
As with other parts of your phone's menu, you'll have to scroll up and  
down to see everything on some wireless Internet sites.  
Scroll up or down to view line by line. You can also use the volume  
keys on the side of your phone to quickly scroll one page at a time  
rather than one line at a time.  
Tip: The tenth item in a numbered list may be selected by pressing the  
key on your phone’s keypad, even though the number 0 doesn’t  
appear on the screen.  
Going to a Wireless Internet Site  
From the wireless Internet Home Page, you can go to a wireless Internet site  
simply by highlighting the desired site name and activating the OK softkey.  
Note that the list of wireless Internet sites extends beyond one page.  
Select More… to see additional site listings.  
To access a site that does not appear on the Home Page, use the  
Go To… function (on page 2 of the Home Page). You'll be required  
to enter the URL (site address) for the site you want to visit. It is not  
necessary to enter “http://” before the site name. Only HDML and  
WML sites are accessible.  
Going Back  
To go back one page, press  
.
Entering Text  
Some wireless Internet sites require that you enter text using your phone's  
Section 15  
Experiencing the Wireless Internet 93  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Creating a Bookmark  
Bookmarks allow you to store the address of favorite wireless Internet  
pages for easy access at a later time.  
To create a bookmark:  
1. Navigate to the desired mobile Internet site using the wireless  
Internet browser.  
2. Press and hold  
to display the Browser Menu.  
3. Press  
4. Press  
5. Press  
for Mark Site.  
to save the bookmark to the Bookmark List.  
to exit the browser menu and return to the Internet page.  
Note: Bookmarking a page does not store the page contents, just  
its address.  
Note: Some pages cannot be bookmarked. Bookmark availability is  
determined by Internet site developers.  
Accessing a Bookmark  
To access a bookmark from the wireless Internet Home Page:  
1. Press and hold  
to display the Browser Menu.  
for Bookmarks.  
2. Press  
3. Select the desired bookmark from the list and press  
.
4. The bookmarked Internet page is displayed.  
Deleting a Bookmark  
1. Press and hold  
to display the Browser Menu.  
for Bookmarks.  
2. Press  
3. Using the navigation button, select the bookmark that you want  
to delete.  
4. Press  
5. Press  
6. Press  
.
for Erase.  
to confirm deletion or  
to cancel.  
Section 15  
94  
Experiencing the Wireless Internet  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
The Browser Menu  
The Browser Menu contains several special functions. To access the  
Browser Menu, press and hold  
.
Reload to refresh the display.  
Home to access the wireless Internet Home Page.  
Bookmarks to mark the site.  
Mark Site to create a bookmark for the current wireless Internet site.  
About Openwave to display information about the Openwave browser.  
Advanced to display advanced options for your wireless  
Internet browser.  
Ending a Browser Session  
To end a browser session and disconnect from the wireless Internet,  
press  
.
Troubleshooting  
If you're having trouble using the wireless Internet Browser, use the  
following troubleshooting guide:  
Problem: You can't escape from a particular site.  
Recommendation: Go to the wireless Internet Home Page by pressing  
and holding  
.
Problem: You continue to receive errors when using a certain site.  
Recommendation: Try again later. Sites are sometimes temporarily  
inaccessible due to high traffic. If the problem persists, there may be a  
problem with the site.  
Problem: The Browser appears to be malfunctioning or stops responding.  
Recommendation: Reset the Browser by going to the Browser Menu and  
selecting the “Restart” option. If that doesn't work, turn your phone off  
then on again. If that also fails, try removing the battery and then  
replacing it.  
If none of these solutions work, please contact your wireless service provider.  
Section 15  
Experiencing the Wireless Internet 95  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Problem: An error message says the phone is not yet registered for  
wireless Internet services.  
Recommendation: Wireless Internet services can take longer to activate  
than voice services. Please try again later. If the problem persists for more  
than one day, please contact your wireless service provider.  
Problem: The message “Service Not Available” appears.  
Recommendation: Your phone can't acquire a signal or you are in an  
area that does not yet support wireless Internet services. If possible, try to  
find an area that supports wireless Internet services. If you continue to  
receive this message, please contact your wireless service provider.  
Problem: The message “Data Server Unavailable” appears.  
Recommendation: Wireless Internet services are temporarily  
unavailable for some reason. Please try again later. If this problem  
persists, please contact your wireless service provider.  
Problem: The message “IP Address Missing” appears.  
Recommendation: Your phone's factory settings have been altered.  
Please contact your wireless service provider for assistance.  
Setting Up a Wireless Data Connection  
Getting Started  
Your wireless Internet-ready phone allows you to connect to a laptop PC,  
hand-held or palm-sized computing device to send and receive e-mail,  
access the Internet or your company’s network and more, without  
searching for a wall-mounted telephone jack. In just three steps, you can  
use your connectivity:  
1. First, you’ll need the wireless data connection materials (sold  
separately).  
2. Connect your laptop PC to your phone by using the serial data cable.  
The cable adapter will connect to a handheld or palm-sized  
computing device.  
3. Finally, take a few minutes to install the dialer software onto your  
computer using your CD.  
For complete details on how to install and use the software, refer to the  
user guide in the wireless data connection materials you purchased.  
Section 15  
96  
Experiencing the Wireless Internet  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Placing a Data Call  
To place a data call while you’re connected to the wireless Internet:  
1. First, make sure the cable is connected properly.  
2. Open the dialer application on your computer and place the call.  
The phone displays the number your computer is calling and a  
“connecting” message is displayed.  
Once the call successfully connects, your phone’s display shows you  
information on the status of the data call.  
Receiving a Data Call  
Most users use the wireless data connection to place outgoing data/fax  
calls. But you can also set up your phone to receive (host) data and fax  
calls. Because each phone model is different, the wireless data  
connection materials don’t include instructions on how to set up your  
phone to receive data and fax calls. Here's the procedure to set up your  
phone to receive a (mobile-terminated) data or fax call:  
1. Select the menu option to enable incoming data/fax calls. Note that  
incoming voice calls are not possible when your phone is set to  
receive data/fax calls.  
2. Once you've received the incoming data/fax call, you may want  
to return the phone to its normal state by disabling incoming  
data/fax calls.  
Using Special Features During a Wireless Data Call  
Your phone gives you the ability to use special features while you’re on a  
wireless Internet connection call. They are outlined below:  
Caller ID: Just like your phone stores regular Caller ID numbers, it  
also stores the numbers of incoming wireless Internet connection  
calls. To distinguish between the two types of calls, “Data” or “Fax”  
displays along with the number of the caller when you view your  
Caller ID records.  
Note: Caller ID is not available on wireless Internet browser calls.  
Section 15  
Experiencing the Wireless Internet 97  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Call Waiting: If someone tries to reach you while you’re connected  
to the wireless Internet, your phone behaves like it is turned OFF.  
Depending on your service, callers may get your voicemail. Call  
Waiting is automatically deactivated whenever you place or receive a  
wireless data connection call.  
Accessing features: You can still access most of your phone’s  
features while you’re connected on a wireless data connection call.  
You can navigate the phone’s menu system to change or view your  
phone’s features or phone book entries. You can also read messages  
or view the Caller ID records that you received before placing the call.  
Ending a Wireless Data Call  
It’s important to note that some of the normal ways to end a call won’t  
work with wireless data connection calls. You should always close the  
connection through the application on your computer. Your phone will  
then return to standby mode.  
Section 15  
98  
Experiencing the Wireless Internet  
Download from Www.Somanuals.com. All Manuals Search And Download.  
16  
Games  
In This Section  
Push Push  
Fly Ribbon  
Spider Hunter  
y now you’ve discovered the great features that come with your phone.  
Now it’s time to experience the fun of playing games on your phone.  
B
Section 16  
Games 99  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Push Push  
To open Push Push:  
1. Press  
2. Press  
3. Press  
.
for Games.  
for Push Push.  
4. When the game’s ‘start screen’ is displayed, press to start.  
5. A list of playing instructions is displayed.  
6. Press  
again to start the game.  
Object  
The object of the game is to push the balls into the little house. The ball can  
be pushed left, right, up, or down. It cannot however, be pushed backwards.  
There must always be a space to push the ball forward or else the ball is  
stuck and the level cannot be completed. Two balls cannot be pushed  
together, only one ball at a time may be pushed. Once the ball has been  
pushed into the house, another ball can push the house if another house is  
located behind it. You can go back one move by pressing  
.
Key Commands  
The following options are displayed when available:  
KEY HELPER: Displays each key’s function.  
- Move Up  
- Move Down  
- Move Left  
- Move Right  
- previous stage  
- next stage  
- restart stage  
- Undo  
- Exit  
Section 16  
Games  
100  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Fly Ribbon  
To open Fly Ribbon:  
1. Press  
2. Press  
3. Press  
4. Press  
.
for Games.  
for Fly Ribbon.  
to start.  
5. The playing instructions is displayed.  
6. Press  
again to start the game.  
Object  
The object of the game is to fly the ribbon through a maze of obstacles.  
The control the path of the ribbon, use the Navigation button. Move the  
flight path of the ribbon up or down to avoid the wall. The longer the  
distance, the faster the ribbon goes.  
Spider Hunter  
To open Spider Hunter:  
1. Press  
2. Press  
3. Press  
4. Press  
.
for Games.  
for Spider Hunter.  
.
5. The playing instructions are displayed.  
6. Select the level by pressing  
for easy or  
for hard.  
Object  
The object of the game is to drop the potted plants on the spiders from the  
top of the wall. Move back and forth using the Navigation key and drop  
the plants by pressing the  
key. The spiders will attempt to reach the  
top of the wall. You start out with three hearts. If a spider reaches the top,  
you loose one heart. When you loose all three, the game is over. A high  
score is recorded each time you play.  
Section 16  
Games 101  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
102  
Download from Www.Somanuals.com. All Manuals Search And Download.  
17  
Position Location  
In This Section  
Services  
Settings  
ith Position Location, the network can locate your position, provided  
you are in a network service area and location services are available.  
This feature can also be turned off (except during an emergency call) to  
ensure your privacy. For a stronger location signal, make sure the antenna  
is fully extended.  
W
Section 17  
Position Location 103  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Services  
This phone is designed to support location based services of the future.  
Features include:  
Driving directions  
Traffic service  
Entertainment/services location  
911 emergency location services  
Location of family/friends  
Location services for 911 calls are not currently available. While these  
services are not available today (or) (are still under development), this  
leading-edge phone has the technology required to support such network  
based services upon their launch.  
Settings  
The settings allow you to turn the Position Location ON or OFF. If the  
option is turned OFF, the network available to you cannot locate your  
position using the Position Location feature. This option is automatically  
turned ON when an emergency call is placed, then turned back OFF  
when the call is completed.  
To turn Position Location ON or OFF:  
1. Press  
2. Press  
3. Press  
4. Press  
for Main Menu.  
for Setup/Tool.  
for Location.  
to continue.  
5. Move the Navigation key left or right to select On or Off.  
6. Press  
to Save and exit.  
Section 17  
Position Location  
104  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
18  
Calculator  
In This Section  
Accessing the Calculator  
Performing Simple Calculations  
aving a calculator handy is not only convenient, but practical. This easy  
H
to use calculator makes figuring out simple math equations a breeze.  
Section 18  
Calculator 105  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Accessing the Calculator  
The calculator allows you to perform basic mathematical calculations  
using your phone. Addition, subtraction, multiplication, and division  
can be performed.  
To access the calculator:  
1. Press  
2. Press  
3. Press  
for Main Menu.  
for Setup/Tool.  
for Calculator.  
Performing Simple Calculations  
1. Press  
2. Press  
3. Press  
for Main Menu.  
for Setup/Tool.  
for Calculator.  
4. Using the keypad, enter the first number of the calculation.  
5. Press the Navigation key up or down to scroll through the different  
mathematical signs.  
6. When the desired sign is displayed, enter the second number of  
the calculation.  
7. Press  
to view the results.  
Note: Perform steps 5 and 6 again to perform additional calculations.  
Section 18  
Calculator  
106  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
19  
Selecting Your Accessories  
In This Section  
Overview of Available Accessories for your Phone  
How to Order  
e offer a variety of accessories for your new phone. Choose from  
W
chargers, batteries and hands-free devices – all designed to give you  
more flexibility and convenience.  
Section 19  
Selecting Your Accessories 107  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Accessory Options  
Standard Battery  
The standard battery provides approximately up to 2.4 hours of  
continuous talk time in digital mode and up to 1.3 hours of continuous  
talk time in analog mode or up to 7 days of continuous standby time in  
digital mode and up to 15 hours continuous standby time in analog  
mode. The battery charges in about 4 hours using any of the charging  
accessories available with this phone.  
Vehicle Power Adapter  
You can charge your phone (even during a call) in your vehicle.  
Hands-Free Car Kit  
Allows you to operate your phone hands-free so you can drive safely. It  
also charges the phone’s battery.  
Travel Charger  
The Travel Charger uses an AC adapter and is provided with your phone  
for convenient charging.  
Wireless Data Connection Materials  
Wireless data connection materials let you link your phone to a laptop  
PC, hand-held or palm-sized computing device to send or receive email  
messages and browse the Internet. Materials include serial data cable,  
cable adaptor, CD-ROM (with software) and user guide.  
Designed for Microsoft® Windows 95, 98, NT, CE and Palm®  
operating systems.  
Section 19  
108  
Selecting Your Accessories  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Holster  
The high-impact plastic Holster is designed specifically for your phone  
with a tailored fit. A spring loaded belt clip ensures protection and easy  
accessibility while carrying your handset.  
Leather Case  
Made from high quality leather, this case provides durability and  
convenience while using your phone.  
How To Order  
Contact your wireless service provider for more information on available  
accessories and the locations where you can purchase them.  
Section 19  
Selecting Your Accessories 109  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
110  
Download from Www.Somanuals.com. All Manuals Search And Download.  
20  
Knowing Performance  
and Safety Guidelines  
In This Section  
Getting the Most Out of Your Reception  
Maintaining Safe Use and Access to Your Phone  
Caring for the Battery  
Acknowledging Special Precautions and the FCC Notice  
art of getting the most out of your phone is knowing where and how it  
works at optimum efficiency. This section outlines performance and  
safety guidelines that ensure you experience the full quality your phone was  
designed to give you.  
P
Section 20  
Knowing Performance and Safety Guidelines 111  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Getting the Most Out of Your Reception  
Keeping Tabs on Signal Strength  
The quality of each call you make or receive depends on the signal strength in your  
area. Your phone informs you of the current strength by displaying a number of bars  
next to the signal strength icon. The more bars displayed, the stronger the signal. If  
you’re inside a building, being near a window may give you better reception.  
Understanding Power Save Feature  
If your phone is unable to find a signal after 15 minutes of searching, a Power Save  
feature is automatically activated. If your phone is on, it periodically rechecks service  
availability or you can check yourself by pressing any key. Anytime the Power Save  
feature is activated, a message displays on the screen. When a signal is found, your  
phone returns to standby mode.  
Understanding How Your Phone Operates  
Your phone is basically a radio transmitter and receiver. When it’s turned on, it  
receives and transmits radio frequency (RF) signals. When you use your phone, the  
system handling your call controls the power level. This power can range from 0.006  
watts to 0.2 watts in digital mode.  
Knowing Radio Frequency Safety  
The design of your phone complies with updated NCRP standards described below.  
In 1991-92, the Institute of Electrical and Electronics Engineers (IEEE) and the  
American National Standards Institute (ANSI) joined in updating ANSI’s 1982  
standard for safety levels with respect to human exposure to RF signals. More than  
120 scientists, engineers and physicians from universities, government health  
agencies and industries developed this updated standard after reviewing the available  
body of research. In 1993, the Federal Communications Commission (FCC) adopted  
this updated standard in a regulation. In August 1996, the FCC adopted hybrid  
standard consisting of the existing ANSI/IEEE standard and the guidelines published  
by the National Council of Radiation Protection and Measurements (NCRP).  
Maintaining Your Phone’s Peak Performance  
There are several simple guidelines to operating your phone properly and  
maintaining safe, satisfactory service.  
Hold the phone with the antenna up, fully-extended and over your shoulder.  
Try not to ever hold, bend or twist the phone antenna.  
Don’t use the phone if the antenna is damaged.  
Speak directly into the mouthpiece.  
Avoid exposing your phone and accessories to rain or liquid spills. If your phone  
does get wet, immediately turn the power off and remove the battery. If it’s  
inoperable, return it to your wireless service provider.  
Section 20  
112  
Knowing Performance and Safety Guidelines  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Maintaining Safe Use of and Access to Your Phone  
FAILURE TO FOLLOW THE INSTRUCTIONS OUTLINED MAY LEAD TO SERIOUS  
PERSONAL INJURY AND POSSIBLE PROPERTY DAMAGE  
Using Your Phone While Driving  
Talking on the phone while driving (or operating the phone without a hands-free  
device) is prohibited in some jurisdictions. Laws vary as to specific restrictions.  
Remember that safety always comes first.  
When using your phone in the car:  
Get to know your phone and its features, such as speed dial and redial.  
When available, use a hands-free device.  
Position your phone within easy reach.  
Let the person you are speaking to know you are driving; if necessary, suspend  
the call in heavy traffic or hazardous weather conditions.  
Do not take notes or look up phone numbers while driving.  
Dial sensibly and assess the traffic; if possible, place calls when you are not  
moving or before pulling into traffic.  
Do not engage in stressful or emotional conversations that may divert your  
attention from the road.  
Dial  
to report serious emergencies. It’s free from your  
wireless phone.  
Use your phone to help others in emergencies.  
Call roadside assistance or a special non-emergency wireless number  
when necessary.  
Tip: Purchase an optional Hands-Free Car Kit.  
Following Safety Guidelines  
To operate your phone safely and efficiently, always follow any special regulations in  
a given area. Turn your phone off in areas where use is forbidden or when it may  
cause interference or danger.  
Section 20  
Knowing Performance and Safety Guidelines 113  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Using Your Phone Near Other Electronic Devices  
Most modern electronic equipment is shielded from radio frequency (RF) signals.  
However, RF signals from wireless phones may affect inadequately shielded electronic  
equipment.  
RF signals may affect improperly installed or inadequately shielded electronic  
operating and entertainment systems in motor vehicles. Check with the  
manufacturer or its representative to determine if these systems are adequately  
shielded from external RF signals. Also check with the manufacturer regarding any  
equipment that has been added to your vehicle.  
Consult the manufacturer of any personal medical devices, such as pacemakers and  
hearing aids, to determine if they are adequately shielded from external RF signals.  
Note: Always turn off the phone in health care facilities and request permission before  
using the phone near medical equipment.  
Turning Off Your Phone Before Flying  
Turn off your phone before boarding any aircraft. To prevent possible interference  
with aircraft systems, the U.S. Federal Aviation Administration (FAA) regulations  
require you to have permission from a crew member to use your phone while the  
plane is on the ground. To prevent any risk of interference, FCC regulations prohibit  
using your phone while the plane is in the air.  
Turning Off Your Phone in Dangerous Areas  
To avoid interfering with blasting operations, turn off your phone when in a blasting  
area or in other areas with signs indicating that two-way radios should be turned off.  
Construction crews often use remote-control RF devices to set off explosives.  
Turn off your phone when you’re in any area that has a potentially explosive  
atmosphere. Although it’s rare, your phone or its accessories could generate sparks.  
Sparks could cause an explosion or a fire resulting in bodily injury or even death.  
These areas are often, but not always, clearly marked. They include:  
Fueling areas such as gas stations  
Below deck on boats  
Fuel or chemical transfer or storage facilities  
Areas where the air contains chemicals or particles such as grain, dust or  
metal powders  
Any other area where you would normally be advised to turn off your  
vehicle engine  
Note: Never transport or store flammable gas, liquid or explosives in the compartment of  
your vehicle that contains your phone or accessories.  
Restricting Children’s Access to Your Phone  
Your phone is not a toy. Children should not be allowed to play with it because they  
could hurt themselves and others, damage the phone or make calls that increase your  
phone bill.  
Section 20  
114  
Knowing Performance and Safety Guidelines  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Caring for the Battery  
Protecting Your Battery  
The guidelines listed below help you get the most out of your battery’s performance.  
Use only approved batteries and desktop chargers. These chargers are designed to  
maximize battery life. Using other batteries or chargers voids your warranty and  
may cause damage.  
In order to avoid damage, charge the battery only in temperatures that range  
from 32º F to 113º F (0º C to 45º C).  
Don’t use the battery charger in direct sunlight or in high humidity areas, such  
as the bathroom.  
Never dispose of the battery by incineration.  
Keep the metal contacts on top of the battery clean.  
Don’t attempt to disassemble or short-circuit the battery.  
The battery may need recharging if it has not been used for a long period  
of time.  
It’s best to replace the battery when it no longer provides acceptable  
performance. It can be recharged hundreds of times before it needs replacing.  
Don’t store the battery in high temperature areas for long periods of time. It’s  
best to follow these storage rules:  
Less than one month: 4º F to 140º F (-20º C to 60º C)  
More than one month: 4º F to 113º F (-20º C to 45º C)  
Disposal of Lithium Ion (LiIon) Batteries  
For safe disposal options of your LiIon batteries, contact your wireless service provider.  
Special note: Be sure to dispose of your battery properly. In some areas, the  
disposal of batteries in household or business trash may be prohibited.  
Note: For safety, do not handle a damaged or leaking LiIon battery.  
Section 20  
Knowing Performance and Safety Guidelines 115  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Acknowledging Special Precautions and the FCC Notice  
FCC Notice  
The phone may cause TV or radio interference if used in close proximity to receiving  
equipment. The FCC can require you to stop using the phone if such interference  
cannot be eliminated.  
Vehicles using liquefied petroleum gas (such as propane or butane) must comply  
with the National Fire Protection Standard (NFPA-58). For a copy of this standard,  
contact the National Fire Protection Association, One Batterymarch Park, Quincy, MA  
02269, Attn: Publication Sales Division.  
Cautions  
Any changes or modifications to your phone not expressly approved in this document  
could void your warranty for this equipment and void your authority to operate this  
equipment. Only use approved batteries, antennas and chargers. The use of any  
unauthorized accessories may be dangerous and voids the phone warranty if said  
accessories cause damage or a defect to the phone.  
Although your phone is quite sturdy, it is a complex piece of equipment and can be  
broken. Avoid dropping, hitting, bending or sitting on it.  
Body-Worn Operation  
To maintain compliance with FCC RF exposure guidelines, if you wear a handset on  
your body, use the supplied or approved carrying case, holster or other body-worn  
accessory. If you do not use a body-worn accessory, ensure the antenna is at least one  
inch (2.5 centimeters) from your body when transmitting. Use of non-approved  
accessories may violate FCC RF exposure guidelines.  
For more information about RF exposure, please visit the FCC website at www.fcc.gov.  
Specific Absorption Rate (SAR) for Wireless Phones  
The SAR is a value that corresponds to the relative amount of RF energy absorbed in  
the head of a user of a wireless handset.  
The SAR value of a phone is the result of an extensive testing, measuring and  
calculation process. It does not represent how much RF the phone emits. All phone  
models are tested at their highest value in strict laboratory settings. But when in  
operation, the SAR of a phone can be substantially less that the level reported to the  
FCC. This is because of a variety of factors including its proximity to a base station  
antenna, phone design and other factors. What is important to remember is that each  
phone meets strict federal guidelines. Variations in SARs do not represent a variation  
in safety.  
All phones must meet the federal standard, which incorporates a substantial margin  
of safety. As stated above, variations in SAR values between different model phones do  
not mean variations in safety. SAR values at or below the federal standard of 1.6 W/kg  
are considered safe for use by the public.  
FCC Radio Frequency Emission  
This phone meets the FCC Radio Frequency Emission Guidelines. FCC ID number:  
A3LSPHA460. More information on the phone’s SAR can be found from the  
following FCC website: http://www.fcc.gov/oet/fccid  
Section 20  
116  
Knowing Performance and Safety Guidelines  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Owner's Record  
The model number, regulatory number and serial number are located on a  
nameplate inside the battery compartment. Record the serial number in the space  
provided below. This will be helpful if you need to contact us about your phone in  
the future.  
Model:  
Serial No.:  
User Guide Proprietary Notice  
CDMA Technology is licensed by QUALCOMM Incorporated under one or more of the  
following patents:  
4,901,307 5,109,390 5,267,262 5,416,797  
5,506,865 5,544,196 5,657,420 5,101,501  
5,267,261 5,414,796 5,504,773 5,535,239  
5,600,754 5,778,338 5,228,054 5,337,338  
5,710,784 5,056,109 5,568,483 5,659,569  
5,490,165 5,511,073  
T9 Text Input is licensed by Tegic Communications and is covered by U.S. Pat.  
5,818,437, U.S. Pat. 5,953,541, U.S. Pat. 6,011,554 and other patents pending.  
Section 20  
Knowing Performance and Safety Guidelines 117  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Section 20  
118  
Knowing Performance and Safety Guidelines  
Download from Www.Somanuals.com. All Manuals Search And Download.  
21  
Warranty Information  
In This Section  
Manufacturer’s Warranty  
Section 21  
Warranty Information 119  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Manufacturer’s Warranty  
STANDARD LIMITED WARRANTY  
What is Covered and For How Long? SAMSUNG  
TELECOMMUNICATIONS AMERICA, L.P. ("SAMSUNG") warrants to  
the original purchaser ("Purchaser") that SAMSUNG's Phones and  
accessories ("Products") are free from defects in material and  
workmanship under normal use and service for the period  
commencing upon the date of purchase and continuing for the  
following specified period of time after that date:  
Phone 1 Year  
Batteries 1 Year  
Leather Case/Pouch 90 Days  
Holster90 Days  
Other Phone Accessories 1 Year  
What is Not Covered? This Limited Warranty is conditioned upon  
proper use of Product by Purchaser. This Limited Warranty does  
not cover: (a) defects or damage resulting from accident, misuse,  
abuse, neglect, unusual physical, electrical or electromechanical  
stress, or modification of any part of Product, including antenna, or  
cosmetic damage; (b) equipment that has the serial number  
removed or made illegible; (c) any plastic surfaces or other  
externally exposed parts that are scratched or damaged due to  
normal use; (d) malfunctions resulting from the use of Product in  
conjunction with accessories, products, or ancillary/peripheral  
equipment not furnished or approved by SAMSUNG; (e) defects or  
damage from improper testing, operation, maintenance,  
installation, or adjustment; (f) installation, maintenance, and  
service of Product, or (g) Product used or purchased outside the  
United States or Canada. This Limited Warranty covers batteries  
only if battery capacity falls below 80% of rated capacity or the  
battery leaks, and this Limited Warranty does not cover any battery  
if (i) the battery has been charged by a battery charger not  
specified or approved by SAMSUNG for charging the battery, (ii)  
any of the seals on the battery are broken or show evidence of  
tampering, or (iii) the battery has been used in equipment other  
than the SAMSUNG phone for which it is specified.  
What are SAMSUNG's Obligations? During the applicable  
warranty period, SAMSUNG will repair or replace, at SAMSUNG's  
sole option, without charge to Purchaser, any defective component  
part of Product. To obtain service under this Limited Warranty,  
Purchaser must return Product to an authorized phone service  
facility in an adequate container for shipping, accompanied by  
Purchaser's sales receipt or comparable substitute proof of sale  
showing the date of purchase, the serial number of Product and the  
sellers' name and address. To obtain assistance on where to  
deliver the Product, call Samsung Customer Care at 1-888-987-4357.  
Upon receipt, SAMSUNG will promptly repair or replace the  
defective Product. SAMSUNG may, at SAMSUNG's sole option,  
use rebuilt, reconditioned, or new parts or components when  
repairing any Product or replace Product with a rebuilt,  
Section 21  
120  
Warranty Information  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
reconditioned or new Product. Repaired/replaced leather cases,  
pouches and holsters will be warranted for a period of ninety (90)  
days. All other repaired/replaced Product will be warranted for a  
period equal to the remainder of the original Limited Warranty on  
the original Product or for 90 days, whichever is longer. All  
replaced parts, components, boards and equipment shall become  
the property of SAMSUNG. If SAMSUNG determines that any  
Product is not covered by this Limited Warranty, Purchaser must  
pay all parts, shipping, and labor charges for the repair or return of  
such Product.  
What Are the Limits On SAMSUNG's Liability? EXCEPT AS SET  
FORTH IN THE EXPRESS WARRANTY CONTAINED HEREIN,  
PURCHASER TAKES THE PRODUCT "AS IS," AND SAMSUNG  
MAKES NO WARRANTY OR REPRESENTATION AND THERE ARE NO  
CONDITIONS, EXPRESS OR IMPLIED, STATUTORY OR OTHERWISE,  
OF ANY KIND WHATSOEVER WITH RESPECT TO THE PRODUCT,  
INCLUDING BUT NOT LIMITED TO:  
·THE MERCHANTABILITY OF THE PRODUCT OR ITS FITNESS FOR  
ANY PARTICULAR PURPOSE OR USE;  
·WARRANTIES OF TITLE OR NON-INFRINGEMENT;  
·DESIGN, CONDITION, QUALITY, OR PERFORMANCE OF THE  
PRODUCT;  
·THE WORKMANSHIP OF THE PRODUCT OR THE COMPONENTS  
CONTAINED THEREIN; OR  
·COMPLIANCE OF THE PRODUCT WITH THE REQUIREMENTS OF  
ANY LAW, RULE, SPECIFICATION OR CONTRACT PERTAINING  
THERETO.  
NOTHING CONTAINED IN THE INSTRUCTION MANUAL SHALL BE  
CONSTRUED TO CREATE AN EXPRESS WARRANTY OF ANY KIND  
WHATSOEVER WITH RESPECT TO THE PRODUCT. ALL IMPLIED  
WARRANTIES AND CONDITIONS THAT MAY ARISE BY OPERATION  
OF LAW, INCLUDING IF APPLICABLE THE IMPLIED WARRANTIES  
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR  
PURPOSE, ARE HEREBY LIMITED TO THE SAME DURATION OF  
TIME AS THE EXPRESS WRITTEN WARRANTY STATED HEREIN.  
SOME STATES/PROVINCES DO NOT ALLOW LIMITATIONS ON HOW  
LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE  
LIMITATION MAY NOT APPLY TO YOU. IN ADDITION, SAMSUNG  
SHALL NOT BE LIABLE FOR ANY DAMAGES OF ANY KIND  
RESULTING FROM THE PURCHASE, USE, OR MISUSE OF, OR  
INABILITY TO USE THE PRODUCT OR ARISING DIRECTLY OR  
INDIRECTLY FROM THE USE OR LOSS OF USE OF THE PRODUCT OR  
FROM THE BREACH OF THE EXPRESS WARRANTY, INCLUDING  
INCIDENTAL, SPECIAL, CONSEQUENTIAL OR SIMILAR DAMAGES,  
OR LOSS OF ANTICIPATED PROFITS OR BENEFITS, OR FOR  
DAMAGES ARISING FROM ANY TORT (INCLUDING NEGLIGENCE  
OR GROSS NEGLIGENCE) OR FAULT COMMITTED BY SAMSUNG,  
ITS AGENTS OR EMPLOYEES, OR FOR ANY BREACH OF CONTRACT  
OR FOR ANY CLAIM BROUGHT AGAINST PURCHASER BY ANY  
OTHER PARTY. SOME STATES/PROVINCES DO NOT ALLOW THE  
EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL  
DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT  
APPLY TO YOU.  
Section 21  
Warranty Information 121  
Download from Www.Somanuals.com. All Manuals Search And Download.  
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU  
MAY ALSO HAVE OTHER RIGHTS, WHICH VARY FROM STATE TO  
STATE/PROVINCE TO PROVINCE. THIS LIMITED WARRANTY  
SHALL NOT EXTEND TO ANYONE OTHER THAN THE ORIGINAL  
PURCHASER OF THIS PRODUCT AND STATES PURCHASER'S  
EXCLUSIVE REMEDY. IF ANY PORTION OF THIS LIMITED  
WARRANTY IS HELD ILLEGAL OR UNENFORCEABLE BY REASON OF  
ANY LAW, SUCH PARTIAL ILLEGALITY OR UNENFORCEABILITY  
SHALL NOT AFFECT THE ENFORCEABILITY FOR THE REMAINDER  
OF THIS LIMITED WARRANTY WHICH PURCHASER  
ACKNOWLEDGES IS AND WILL ALWAYS BE CONSTRUED TO BE  
LIMITED BY ITS TERMS OR AS LIMITED AS THE LAW PERMITS.  
THE PARTIES UNDERSTAND THAT THE PURCHASER MAY USE  
THIRD-PARTY SOFTWARE OR EQUIPMENT IN CONJUNCTION  
WITH THE PRODUCT. SAMSUNG MAKES NO WARRANTIES OR  
REPRESENTATIONS AND THERE ARE NO CONDITIONS, EXPRESS  
OR IMPLIED, STATUTORY OR OTHERWISE, AS TO THE QUALITY,  
CAPABILITIES, OPERATIONS, PERFORMANCE OR SUITABILITY OF  
ANY THIRD-PARTY SOFTWARE OR EQUIPMENT, WHETHER SUCH  
THIRD-PARTY SOFTWARE OR EQUIPMENT IS INCLUDED WITH THE  
PRODUCT DISTRIBUTED BY SAMSUNG OR OTHERWISE,  
INCLUDING THE ABILITY TO INTEGRATE ANY SUCH SOFTWARE OR  
EQUIPMENT WITH THE PRODUCT. THE QUALITY, CAPABILITIES,  
OPERATIONS, PERFORMANCE AND SUITABILITY OF ANY SUCH  
THIRD-PARTY SOFTWARE OR EQUIPMENT LIE SOLELY WITH THE  
PURCHASER AND THE DIRECT VENDOR, OWNER OR SUPPLIER OF  
SUCH THIRD-PARTY SOFTWARE OR EQUIPMENT, AS THE CASE  
MAY BE.  
This Limited Warranty allocates risk of Product failure between  
Purchaser and SAMSUNG, and SAMSUNG's Product pricing  
reflects this allocation of risk and the limitations of liability  
contained in this Limited Warranty. The agents, employees,  
distributors, and dealers of SAMSUNG are not authorized to make  
modifications to this Limited Warranty, or make additional  
warranties binding on SAMSUNG. Accordingly, additional  
statements such as dealer advertising or presentation, whether  
oral or written, do not constitute warranties by SAMSUNG and  
should not be relied upon.  
Section 21  
122  
Warranty Information  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Samsung Telecommunications America, L.P.  
1130 East Arapaho Road  
Richardson, Texas 75081  
Phone: 1-800-SAMSUNG  
Phone: 1-888-987-HELP (4357)  
©2002 Samsung Telecommunications America. All rights reserved.  
No reproduction in whole or in part allowed without prior written  
approval.  
Specifications and availability subject to change without notice.  
[080802]  
Section 21  
Warranty Information 123  
Download from Www.Somanuals.com. All Manuals Search And Download.  
124  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Command Keys 14  
Connect Alert 69  
Countdown 79  
Index  
A
D
Data  
Receiving 70  
Accessing the Calculator 106  
Accessing the Security Menu 74  
Accessories 107  
Data/Fax Mode 70  
Dialing Options 28  
Dialing Phone Numbers With  
Pauses 33  
Disconnect Alert 69  
Display Screen 15  
Accessory Options 108  
Adding a Phone Number to an In-  
ternal Phone Book Entry 63  
Alarm Clock 79, 82  
Answering Calls 26  
B
E
Backlight  
Changing time length 68  
Battery  
Capacity 16  
Charging 17  
Installation 16  
Removing 17  
Editing an Internal Phone Book  
Entering Characters  
Character Input Mode 42  
F
Fax  
Receiving 70  
Finding Internal Phone Book  
Entries 62  
Forwarding Calls 49  
Front View of Phone 13  
C
Calculator 105  
Calendar  
Jump To Date 79  
Task List 79  
G
Call - Muting a call 46  
Call Forwarding 49  
Call Guard 22  
Call History  
Managing 51  
Options 52  
Viewing 52  
Call Waiting 48  
Caller ID 48  
Changing Ringer Volume 46  
Changing the Contrast 69  
Changing the Lock Code 75  
Fly Ribbon 101  
Push Push 100  
Spider Hunter 101  
Getting Started 7, 8  
Getting to Know Your Phone 11  
Greeting  
Changing 66  
I
Internal Phone Book 61  
Adding a New Entry 62  
Entry Options 62  
Secret Entries 64  
Index 125  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
L
Roaming  
Analog Networks 20  
Language  
Other Digital Networks 20  
Roam Mode 21  
Changing 66  
Lock Mode  
Locking Your Phone 74  
S
Security 73  
Security - Erasing the Internal  
M
Phone Book 76  
Making Calls 26  
Menu Diagram 37  
Menu Navigation 36  
Menu Structure 36  
Menus  
Viewing 37  
Message  
Messages  
Knowing when you have them  
Security - Resetting Your Phone  
Security Menu  
Accessing 74  
Selecting a Ringer Type for an En-  
Sending Numeric Pages 59  
Service Features 47  
Set Time 80  
Setting Up Your Voicemail 9  
Special Numbers 75  
Speed Dialing 34  
Messaging  
Managing 55  
Missed Call Notification 27  
Muting 27  
Symbols and Numbers  
Entering 44  
T
N
T9 Text Input 44  
Task List 79  
Text Messages  
Options 59  
Sending 58  
Three-Way  
Calling 49  
Navigating Menus 36  
Navigating Through Menus and  
Entering Text 35  
New Events 80  
P
Performance and Safety Guide-  
Three-Way Calling 49  
To edit a Today event 81  
To Erase a Programmed Alarm 82  
To erase an event 81  
To Set Time using the menu op-  
tions 80  
To View, Add, Edit or Erase an  
event on your Calendar 79  
Troubleshooting 95  
Turning Your Phone On and Off 8  
Personal Information Manage-  
ment 77  
Position Location 103  
R
Ringer - Silencing 46  
Ringer Types 67  
Data/Fax 68  
Ringer Types for Alarms 68  
Ringer Types for Messages 67  
Ringer Types for Voice Calls 67  
Ringer Volume 66  
126 Index  
Download from Www.Somanuals.com. All Manuals Search And Download.  
U
Understanding This User Guide 10  
Unlocking Your Phone 9, 74  
Using the Battery 16  
V
Voice Mode  
Returning from data or fax  
mode 71  
Voice Services 83  
Voice-Activated Dialing 84  
Voicemail  
Clearing the Icon 58  
New message alerts 57  
Retrieving 57  
Retrieving messages 57  
Setting Up 9  
Setting up 56  
Volume  
Adjusting 45  
Adjusting during a conversa-  
tion 46  
Conversation 27  
W
Warranty 120  
Web Guard 92  
What are the Schedule Options 78  
Wireless Internet  
Bookmarks 94  
Browser 90  
Connection 96  
Home Page 91  
Wireless Internet Browser  
Launching 90  
Y
Your Phone Number 34  
Index 127  
Download from Www.Somanuals.com. All Manuals Search And Download.  

RCA Flat Panel Television D52W136D User Guide
Remington Blower BB18125A User Guide
Roku Portable Multimedia Player Roku XD User Guide
Samson Home Theater System XP106 User Guide
Samson Stereo Amplifier B90 User Guide
Samsung Home Theater System HT DT79 User Guide
Samsung Microwave Oven AMW612W ST User Guide
Samsung Washer Dryer WF B1056 User Guide
Scotsman Ice Ice Maker HD30 User Guide
Sennheiser Headphones HD 400 User Guide