Samsung Car Video System STM 19LA 17LA User Guide

An Ideal  
Face of Security  
Professional Security LCD Monitor STM-19LA/17LA User’s Manual  
Thank you for purchasing a SAMSUNG LCD Monitor.  
SALES NETWORK  
SAMSUNG TECHWIN CO., LTD.  
Before attempting to connect or operate this product,  
please read these instructions carefully and save this manual for future use.  
145-3, Sangdaewon-dong, Jungwon-gu, Seongnam-si, Gyeonggi-do, 462-120, Korea  
TEL : +82-31-740-8151~8158 FAX : +82-31-740-8145  
SAMSUNG OPTO-ELECTRONICS UK, LTD.  
Samsung House, 1000 Hillswood Drive, Hillswood Business Park Chertsey, Surrey KT16 OPS  
TEL : +44-1932-45-5308 FAX : +44-1932-45-5325  
VAN 08. 04  
ENGLISH  
L39ME0145  
Download from Www.Somanuals.com. All Manuals Search And Download.  
USER’S MANUAL  
USER’S MANUAL  
CAUTION  
RISK OF ELECTRIC SHOCKS  
SAFETY INSTRUCTION  
DO NOT OPEN  
Thank you for purchasing our product. Before operating this product, please read the instruction manual.  
1. Unplug this product from the wall outlet before cleaning.Do not use liquid cleaners or aerosol cleaners.  
Use a damp cloth for cleaning.  
CAUTION: TO REDUCE THE RISK OF  
ELECTRIC SHOCK, DO NOT REMOVE COVER (OR  
BACK). NO USER SERVICEABLE PARTS INSIDE.  
REFER SERVICING TO QUALIFIED SERVICE PER-  
SONNEL.  
2. Do not use this product near water.  
3. Do not place this product on an unstable cart, stand or table. The product may fall, causing serious damage to  
the product.  
4. Slots and openings in the cabinet and the back are provided for ventilation: to ensure reliable operation of the  
product, these openings must not be blocked by placing the product on a bed, sofa, rug or other similar  
surface. This product should never be placed near or over a heat register.This product should not be placed in a  
built-in installation unless proper ventilation is provided.  
This symbol is intended to alert the user to the presence of  
uninsulated “dangerous voltage” within the product’s enclosure that  
may be of suffcient magnitude to constitute a risk of electric shock to  
persons.  
5. This product should be operated from the type of power source indicated on the marking label. If you are not  
sure of the type of power available, consult your dealer or local power company.  
6. This product is equipped with a 3 wire grounding type plug having a third(grounding) pin. This is a safety  
feature. If you are unable to insert the plug into the outlet, contact your electrician to replace your obsolete outlet.  
Do not defeat the purpose of the grounding-type plug.  
This symbol is intended to alert the user to the presence of important  
operating and maintenance(servicing) instructions in the literature  
accompanying the appliance.  
7. Do not allow anything to rest on the power cord. Do not locate this product where persons will walk on the cord.  
8. If an extension cord is used with this product, make sure that the total of the ampere ratings on the products  
plugged into the extension cord do not exceed the extension cord ampere rating. Also, make sure that the total of all  
products plugged into the wall outlet does not exceed 10 amperes.  
9. Never push objects of any kind into this product through cabinet slots as they may touch dangerous voltage  
points or short out parts that could result in a risk of fire or electric shock. Never spill any kind of liquid on the  
product.  
CAUTIONS  
• NEVER REMOVE THE BACK COVER  
Removal of the back cover should be carried out only by qualified personnel.  
10. Do not attempt to service this product yourself, as opening or removing covers may expose you to dangerous  
voltage points or other risks. Refer all servicing to service personnel.  
• DO NOT USE IN HOSTILE ENVIRONMENTS  
To prevent shock or fire hazard, do not expose the unit to rain or moisture. This unit is designed to be used in  
the office or home. Do not subject the unit to vibrations, dust of corrosive gases.  
11. Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following  
conditions.  
• KEEP IN A WELL VENTILATED PLACE  
Ventilation holes are provided on the cabinet to prevent the temperature from rising. Do not cover the unit or  
place anything on the top of unit.  
• When the power cord or plug is damaged or frayed.  
• If liquid has been spilled into the product.  
• If the product has been exposed to rain or water.  
• AVOID HEAT  
Avoid placing the unit in direct sunshine or near a heating appliance.  
• If the Product does not operate normally when the operating instructions are followed. Adjust only those controls  
that are covered by the operating instructions since improper adjustment of other controls may result in damage  
and will often require extensive work by a qualified technician to restore normal operation.  
• TO ELIMINATE EYE FATIGUE  
Do not use the unit against a bright back ground and where sunlight or other light sources will shine directly  
on the monitor.  
• If the product has been dropped or the cabinet has been damaged.  
• BE CAREFUL OF HEAVY OBJECT  
Neither the monitor itself nor any other heavy object should rest on the power cord. Damage to a power cord  
can cause fire or electrical shock.  
• If the product exhibits a distinct change in performance, indicating a need for service.  
4
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
USER’S MANUAL  
USER’S MANUAL  
FCC RF INTERFERENCE STATEMENT  
REMOTE FUNCTIONS  
B. REMOTE CONTROLLER  
NOTE  
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part  
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in  
a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not  
installed and used in accordance with the instructions, may cause harmful interference to radio  
communications. However, there is no guarantee that interference will not occur in a particular installation.  
If this equipment does cause harmful interference to radio or television reception which can be determined by  
turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the  
following measures.  
1. POWER(  
) : Turns the power ON or OFF. There will be a few  
seconds delay before the display appears.  
2. SOURCE : Select pc or video( AV1 / AV2 / S-Video / PC ) sources.  
3. APC (Auto Picture Control) : Select picture mode.  
4. ACC (Auto Colour Control) : Select Colour mode.  
5. AV1 : Select AV1 mode  
6. AV2 : Select AV2 mode  
- Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver.  
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.  
- Consult the dealer or an experienced radio, TV technician for help.  
- Only shielded interface cable should be used.  
Finally, any changes or modifications to the equipment by the user not expressly approved by the grantee or  
manufacturer could void the users authority to operate such equipment.  
7. S-VIDEO : Select S-VIDEO mode  
8. PC : Select PC mode  
9. AUTO : Auto geometry adjustment in PC Source.  
10. MUTE : Mute the sound.  
11. MENU : Activates and exits the On Screen Display.  
12. EXIT : Exit the On Screen Display.  
• DOC COMPLIANCE NOTICE  
This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus set  
out in the radio interference regulation of Canadian Department of communications.  
13. VOL(  
) : Increases or decreases the level of audio volume.  
14. UP/DOWN : Move to OSD menu.  
15. ENTER : Accepts your selection or displays the current mode.  
16. INFO : Input mode information Display.  
17. STILL : Pause the picture.  
CONNECTING WITH EXTERNAL EQUIPMENT  
A. BOTTOM PANEL CONTROL  
1
2
3
4
5
6
7
8
9
10 11  
CONTROLS AND FUNCTIONS  
DVR  
CAMERA A  
CAMERA B  
VCR  
1. DC 12V IN  
2. D-SUB IN : PC Signal Input  
1
2
3
4
5
6
7
8
3. VIDEO 1(AV1) IN : Composite signal Input for AV1  
4. VIDEO 1(AV1) OUT : Video looping output for AV1  
5. VIDEO 2(AV2) IN : Composite signal Input for AV2  
6. VIDEO 2(AV2) OUT : Video looping output for AV2  
7 / 8. AUDIO IN(L+R) : Stereo Audio Signal Input  
9. S-VIDEO (Y/C) IN : Y/C separated signal input  
• Front Key Control  
1. SOURCE : Select input source, and move the previous menu.  
2. MENU : Activates and exits the On Screen Display. This button can also be used to move previous menu or  
status. OSD MENU(MAIN) : Custom, Picture/Sound, Setup.  
3/4. AUTO/  
/
: This button allows user to enter the sub-menu of the activated function  
10. S-VIDEO (Y/C) OUT : Y/C separated signal looping output 11. PC STEREO IN  
AUTO: Auto geometry adjustment in PC Source.  
6
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
USER’S MANUAL  
USER’S MANUAL  
5/6. VOL : Adjust the volume / Adjust menu settings.  
B. Picture / Sound Menu(Only Video mode)  
7. IR Sensor : Remote controller sensor.  
8. POWER ON/OFF(  
)
Turns the power ON or OFF. There will be a few seconds delay before the display appears. The power  
LED(next to the power switch) lights with green when the power is turned ON. The power is turned off by  
pressing the power switch again and the power LED goes Red.  
• OSD MENU DESCRIPTION  
A: CUSTOM MENU (Only Video mode)  
Press the MENU button and then up( ) / down( ) button to select  
the Picture / Sound.  
Press the right( ) or ENTER button.  
1. Picture Mode  
Press the MENU button and then up( ) / down(  
button to select the Custom menu.  
)
Press the up( ) / down( ) button to select Custom sub  
menu. Press the left( ) /right( ) button to adjust  
picture setting. Press the MENU button to save.  
Press the up( ) / down( ) button to select the Picture  
Mode.  
Press the right( ) or ENTER button and then press  
up( ) / down( ) button to select the desire Picture  
Mode.  
• Brightness: Increase or decrease the intensity of the image.  
• Contrast: Increase or decrease the intensity (lightness or dimness) of the image.  
• Color: Increase or decrease the colour of the picture.  
• Tint: Increase or decrease the tint of the picture.  
• Sharpness: Increase or decrease the sharpness of the picture.  
2. Color Tone  
A: CUSTOM MENU (Only PC mode)  
Press the up( ) / down( ) button to select the Color  
Tone.  
Press the ( ) or ENTER button and then up( )/  
down( ) button to select the desired color tone.  
Press the MENU button to save.  
Press the MENU button and then up( ) / down(  
button to select the Custom menu.  
)
Press the up( ) / down(  
sub menu. Press ( ) /right( ) button to adjust  
picture setting. Press the MENU button to save.  
button to select Custom  
8
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
USER’S MANUAL  
USER’S MANUAL  
3. Mute  
C. SETUP MENU  
Press the up( ) / down( ) button to select the Color  
Tone.  
Press the ( ) or ENTER button and then up( )/  
down( ) button to select the desired Mute.  
Press the MENU button to save.  
4. Volume  
Press the up( ) / down( ) button to select the Volume.  
Press ( ) /right( ) button to adjust Volume.  
Press the MENU button to save.  
Press the MENU button and then up( ) / down( ) button to select  
the Setup menu.  
Press the right( ) or ENTER button.  
1.Reset  
Press ENTER button to select the reset  
Reset: Select to reset all setting to the factory default  
values.  
5. PC (Only PC mode)  
2. Language  
Press the up( ) / down( ) button to select the PC  
Press the ( ) or ENTER button  
Press the up( ) / down( ) button to select PC sub  
menu. Press the right( ) or ENTER button and then  
left ( ) /right( ) button to adjust PC setting.  
Press the MENU button to save.  
• Auto Adjust: Auto geometry adjustment  
• Phase: Adjust the number of horizontal picture elements.  
• H. position: Move image horizontally on screen right or left.  
• V. position: Move image vertically on screen up or down.  
• Frequency: Adjust the vertical noise of screen image.  
Press the up( ) / down( ) button to select the  
Language menu.  
Press the right( ) or ENTER button.  
Press the up( ) / down( ) button to select  
language.  
Press the MENU button to save.  
10  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
USER’S MANUAL  
USER’S MANUAL  
3. OSD Tone  
MOUNTING GUIDE  
Wall mountable using two methods:  
1) Using the 200 mm pre-cut holes  
2) Using the VESA standard wall mount design and the 100mm hole pattern on the back panel to install the LCD  
monitor to the wall.  
Press the up( ) / down( ) button to select the OSD  
tone menu.  
Press the up( ) / down( ) button to select the  
desire OSD Tone.  
Press the right( ) or ENTER button  
Press the MENU button to save.  
Wall  
4. Blue Screen  
Pad  
Arm  
Monitor  
D-SUB CONNECTOR PIN ASSIGNMENTS  
Press the up( ) / down( ) button to select the blue  
screen.  
Press the right( ) or ENTER button.  
Press the up( ) / down( ) button to select on or off.  
Press the MENU button to save.  
• PIN ASSIGNMENTS  
Pin 1  
Pin 2  
Pin 3  
Pin 4  
Pin 5  
Pin 6  
Pin 7  
Pin 8  
RED VIDEO  
Pin 9  
GREEN VIDEO  
BLUE VIDEO  
GROUND  
Pin10  
Pin 11  
Pin 12  
Pin 13  
Pin 14  
Pin 15  
SIGNAL CABLE DETECT  
GROUND  
5. Key Lock  
SAD(for DDC)  
D-SUB  
GROUND  
H-SYNC.(or H+V SYNC.)  
V-SYNC  
RED GROUND  
GREEN GROUND  
BLUE GROUND  
SLC(for DDC)  
• ACCESSORY  
1. POWER CORD  
5. Remote Control  
2. USER’S MANUAL  
6. Batteries  
3. PC cable  
7. Wall mount (Option)  
4. Adaptor  
8. Rack mount (Option)  
Press the up( ) / down( ) button to select the key  
lock menu.  
Press the right( ) or ENTER button  
Press the up( ) / down( ) button select on or off  
Press the MENU button to save.  
12  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
USER’S MANUAL  
USER’S MANUAL  
POWER MANAGEMENT  
SPECIFICATIONS  
This monitor features a power management system to “power down” upon receipt of the VESA DPMS(The  
display power management signaling) from a VESA DPMS video card. The VESA DPMS-compliant video card  
performs this signaling system through not sending horizontal, vertical, or sync signal. This monitor enters an  
appropriate mode through identifying each of the three modes of the signaling system.  
Model Name  
Composite  
STM-19LA  
STM-17LA  
2ch input 1.0Vp-p, 75terminated, loop-through out  
1ch input (Y/C), loop-through out  
1ch input  
Video  
S-VIDEO  
VGA  
Resolution  
Frequency  
1280x1024@60Hz  
Horizontal(KHz)  
Vertical(Hz)  
31KHz ~ 64KHz  
50Hz ~ 75Hz  
• POWER CONSUMPTION  
720x480@60Hz, 720x576@50Hz, 800x600@60/75Hz  
1024x768@60/75Hz, 1280x1024@60Hz  
MODE  
ON  
STANDBY  
POWER CONSUMPTION  
MODE  
POWER CONSUMPTION  
VGAMode  
<50W  
<11W  
SUSPEND  
ACTIVE OFF  
<11W  
Power Consumption  
Max. 42W  
Max. 36W  
< 8.5W  
Net  
Packing  
Net Weight  
Gross Weight  
430x428x200mm  
490x506x225mm  
6.61Kg  
382.4x390.5x200mm  
436x476x225mm  
6.20Kg  
Dimensions  
(WxDxH)  
Weight(kg)  
• LED INDICATOR  
8.43Kg  
7.73Kg  
Power Supply  
DC 12V / 4.16A  
The power management feature of the monitor is comprised of four stages : On(Green), Standby, Suspend,  
Active off(Red on/off 1 sec) and Unsupported mode(Green).  
Operating Temperature  
Operating Humidity  
Storage Temperature  
Storage Humidity  
Size  
Active Display Area  
Pixel Pitch(mm)  
Brightness(cd/m2)  
Contrast Ratio  
50˚F~104˚F (10˚C~40˚C)  
10%~80%, Non-condensing  
-4˚F~113˚F (-20˚C~45˚C)  
5%~95%,Non-condensing  
Environmental  
Considerations  
MODE  
ON  
STANDBY  
SUSPEND  
ACTIVE OFF  
UNSUPPORTED MODE  
POWER OFF  
LED COLOR  
MONITOR OPERATION  
GREEN  
Normal Operation  
19" Diagonal AM-TFT  
376.32x301.056mm  
17" Diagonal AM-TFT  
337.92x270.336mm  
RED ON/OFF  
1 SEC  
Screen blanks after preset idle time and some electronic circuits or all  
circuitry in the monitor shutdown.  
0.294mm(H) x 0.294mm(V)  
0.264mm(H) x 0.264mm(V)  
LCD Panel Spec  
300cd/m2  
GREEN  
RED  
Normal operation but the on screen display will show error massage.  
Not opreation  
800:1  
1000:1  
Response Time(ms)  
Viewing Angle(L/R/ T/B)  
5ms  
80/80/75/85  
80/80/80/80  
• Technical specifications are subject to change without notice.  
TROUBLESHOOTING GUIDE  
DIMENSION  
TROUBLE  
TROUBLESHOOTING TIP  
No image on display screen  
1. Check that power cord of the monitor have been connected securely  
into wall outlet or grounded extension cable or strip.  
STM-19LA  
STM-17LA  
2. Power switch should be in the ON position and LED is lit.  
3. Check that the Brightness and / or the Contrast adjustments of the Display haver not  
been turned down to minimum levels.  
“Going to Sleep” message on  
screen  
1. The signal cable should be completely connected to the video card / computer  
2. The video card should be completely seated in its slot and the computer is  
switched ON.  
Display image is not centered, too  
small or toolarge in PC mode  
Push the down key in front side or Auto key in remocon.  
Adjust Clock and Phase in the OSD.  
Vertical or Horizontal noise is  
present in the picture  
14  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  

RCA Universal Remote RCR4258R User Guide
Roland Drums TD 9 User Guide
Runco Flat Panel Television CX 42HD User Guide
Russound Network Card A SRC1 User Guide
Ryobi Trimmer HT816r, HT818r, HT822r User Guide
Samsung Home Theater System AH68 02333R User Guide
Seagate Computer Drive 100563223 User Guide
Sears Cooktop 32025 User Guide
Seiko Group Games ER3500 User Guide
Senco Staple Gun SNS45 User Guide