Samsung Camera Lens SOC 4160 User Guide

High Resolution Day & Night Varifocal Lens Camera SOC-4160 User Guide  
Before installing and operating this product,  
please read this manual thoroughly.  
ENGLISH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Before operating the camera, confirm the camera model and correct input power  
voltage. In order to that you can understand this manual thoroughly, we will explain the  
model description.  
n SOC-4160 SERIES  
• NTSC MODEL  
SOC-4160N  
• PAL MODEL  
SOC-4160P  
n MODEL DESCRIPTION  
• SOC-4160 X  
The lightning flash with an arrowhead symbol, within an equilateral triangle is  
intended to alert the user to the presence of uninsulated “dangerous voltage”  
within the product's enclosure that may be of sufficient magnitude to constitute  
a risk of electric shock to persons.  
_
SIGNAL SYSTEM  
• SIGNAL SYSTEM  
N --> NTSC MODEL  
P --> PAL MODEL  
The exclamation point within an equilateral triangle is intended to alert the user  
to the presence of important operating and maintenance (servicing) instructions  
in the literature accompanying the appliance.  
INFORMATION -This equipment has been tested and found to comply with limits  
for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are  
designed to provide reasonable protection against harmful interference when the  
equipment is operated in a commercial environment. This equipment generates,  
uses, and can radiate radio frequency energy and, if not installed and used in  
accordance with the instruction manual, may cause harmful interference to radio  
communications.  
Operation of this equipment in a residential area is likely to cause harmful  
interference in which case the user will be required to correct the interference at  
his own expense.  
WARNING -Changes or modifications not expressly approved by the manufacturer  
could void the users authority to operate the equipment.  
WARNING -To prevent electric shock and risk of fire hazards:  
Do NOT use power sources other than that specified.  
This installation should be made by a qualified service person and  
should conform to all local codes.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Contents  
Features  
Features ……………………………………………………………… 5  
Warnings & cautions………………………………………………… 6  
Precautions…………………………………………………………… 7  
Components and Accessories ……………………………………… 9  
• Overview……………………………………………………………… 9  
Excellent Sensitivity  
DIS (Digital Image Stabilizer)  
The DIS function compensates for any camera  
movement, to produce more stable pictures.  
The built-in high sensitivity COLOR CCD enable a  
clear image even in 0.15Lux(COLOR), 0.0003Lux  
(SENS-UP) or lower illumination.  
IP66 Approved/Dust and Rain  
Resistant  
High Resolution  
n
Front…………………………………………………………………………… 9…  
With dust and rain resistant design, the camera  
can be installed outside under building eaves or  
places that are exposed to the dust and rain.  
n
Back…………………………………………………………………………… 10  
By adopting a diagonal 6mm(1/3") 410,000 (NTSC)  
pixel, 470,000(PAL) pixel SONY CCD, the camera  
produces clear picture quality with a horizontal  
resolution of 600 TV lines for color and a horizontal  
resolution of 700TV lines for BW mode.  
Adjust to lens………………………………………………………… 11  
n
Adjust to Lens’s ZOOM and Focus…………………………………………… 11  
Communication  
Connection…………………………………………………………… 12  
n
n
n
n
Connecting to monitor……………………………………………………… 12…  
Connecting to power………………………………………………………… 13…  
RS-485 Communication control…………………………………………… 14  
Using Coaxial Communications……………………………………………… 15  
RS-485, Coaxial communication methods are  
supported.  
-RS-485 Communications  
: STW(SPD), PELCO-P, PELCO-D, VICON, PANASONIC,  
BOSCH, HONEYWELL, SEC  
-Coaxial Communications  
SSNR3 (Samsung Super Noise  
Reduction) Function  
The high-performance W-V DSP chip effectively  
removes low-light gain noise and ghosting to  
provide clear images even in dark environments.  
Operating Your Camera …………………………………………… 16  
n
n
: Pelco Coaxition  
Menu Configuration………………………………………………………… 16…  
Menu Setup…………………………………………………………………… 16…  
• LENS (Adjusting to the brightness level)………………………………… 17…  
DAY&NIGHT(ICR)  
Miscellaneous Functions  
This camera has a function that automatically  
selects the mode that is appropriate for daytime or  
night-time conditions.  
The COLOR mode operates in daytime conditions  
to provide optimum colors, and BW mode operates  
in night-time conditions to enhance the definition  
of the image.  
• EXPOSURE…………………………………………………………… 18…  
• White Balance (White Bal.)……………………………………………… 19  
• SSDR (Samsung Super Dynamic Range)………………………………… 20  
• BACKLIGHT…………………………………………………………… 21…  
• SSNR3………………………………………………………………… 23…  
• DAY/NIGHT…………………………………………………………… 24…  
• SPECIAL……………………………………………………………… 26…  
• EXIT…………………………………………………………………… 31  
HLC(High Light Compensation), SENS-UP, FLIP(H/  
V-REV), D-ZOOM, SHARPNESS, MOTION DETECTION  
and PRIVACY functions are provided.  
OSD  
SSDR  
The camera’s OSD is complimented by 18 languages.  
- NTSC : Korean, English, French, Spanish,  
Japanese, Portuguese, Taiwanese  
- PAL : English, French, German, Spanish, Italian,  
Chinese, Russian, Czech, Polish, Romanian,  
Serbian, Swedish, Danish,Turkish, Portuguese  
(Samsung Super Dynamic Range)  
Troubleshooting……………………………………………………… 32  
Specifications………………………………………………………… 33  
Dimension …………………………………………………………… 34  
For images with high contrast between bright and  
dark Areas from difficult lighting conditions such  
as backlighting, this camera selectively illuminates  
darker Areas while retaining the same light level  
for brighter Areas to even out the overall brightness.  
COLOR CCD CAMERA  
COLOR CCD CAMERA  
User Guide  
UseDr Gouiwdenload from Www.Somanuals.com. All Manuals Search And Download.  
4
5
Samsung Techwin cares for the environment at all product manufacturing stages to preserve  
the environment, and is taking a number of steps to provide customers with more  
environment-friendly products. The Eco mark represents Samsung Techwin's will to create  
environment-friendly products, and indicates that the product satisfies the EU RoHS Directive.  
Precautions  
Do not install under extreme  
temperature conditions.  
Do not install in high humidity  
environment.  
Warnings & Cautions  
This information is provided to ensure your safety and to prevent any losses, financial or  
otherwise. Please read it carefully and use the product accordingly.  
* For product inquiries, please contact the retail shop where you bought the camera. The use of  
equipment such as an aerial ladder while providing after-sales service shall be at your expense.  
Notes  
Use only under temperature conditions  
between -10°C and +50°C. Provide  
good ventilation when using in high  
temperature conditions.  
May lower image quality.  
• Please make sure the product is installed appropriate places where secured from  
flood, such as under the eaves, to operate properly.  
• This product is certified as IP66 standard. However, if there is any flood concerns, it  
is highly recommended to use an outdoor Housing When you install the camera  
inside an outdoor Housing, please use one of the following methods:  
1. Remove the front glass of Housing before installing the camera.  
2. To keep the front glass of Housing, remove the front cover, and then put the  
camera close to the front glass.  
Warning/Attention/Special Mark Messages  
Do not install under unstable  
lighting conditions.  
Avoid touching the camera lens.  
Ignoring this information may result in  
material loss or personal injuries.  
Ignoring this information may result in  
death or or serious personal injuries.  
Indicates "No Disassembling."  
Indicates "Never Allowed."  
Severe lighting changes or flickering may  
hinder normal camera operation.  
The lens is the most important component  
of the camera. Be careful not to smear it  
with fingerprints.  
COLOR CCD CAMERA  
COLOR CCD CAMERA  
User Guide  
UseDr Gouiwdenload from Www.Somanuals.com. All Manuals Search And Download.  
6
7
Components and Accessories  
Precautions  
7
2
3
5
Do not drop the camera or  
subject it to physical shock.  
Never keep the camera face to  
strong light directly.  
SOC-4160  
4
7
2
5
3
SOC-4160  
Sunshield Adaptor (1EA)  
Sunshield  
Tapping Screw (3EA)  
L-type hexagon wrenches (3.0mm)  
User’s Manual  
Installation Video Output Cable  
Overview  
May cause a product malfunction.  
May damage the CCD.  
FRONT  
Do not expose the camera to  
radioactivity.  
2
3
4
5
7
6
Radioactivity exposure may damage the  
CCD.  
2
3
4
5
6
Camera Sunshield  
S unshield adaptor : Fixing the sunshield onto the camera.  
Focus lever : Set focus of lens by turn the focus lever.  
Zoom lever : Set zoom magnification of lens by turn the zoom lever.  
Notes  
Front cover  
Function Setup Switch :  
• Exposure to a spotlight or an object emitting strong light may cause smear or  
blooming.  
• Ensure that the power source complies with normal specifications before  
supplying it to the camera.  
Display the menu on the screen and move the cursor to four directions to confirm  
status or after changing a selected item.  
7
Video Output Terminal to Monitor :  
Used for monitoring of video output When camera installation.  
COLOR CCD CAMERA  
COLOR CCD CAMERA  
User Guide  
UseDr Gouiwdenload from Www.Somanuals.com. All Manuals Search And Download.  
8
9
Adjust to Lens  
Overview  
Notes  
Adjust the lens's zoom and focus.  
• When you adjust to the ZOOM & FOCUS of the lens, Please remove the front cover  
from the camera, by turning the cover counterclockwise.  
To adjust the zoom & focus loosen the individual levers before tightening them  
again.  
• To ensure the weatherproof integrity is maintained, ensure the front cover is  
tightened correctly.  
1. Remove the sunshield from the camera.  
2. Remove the front cover from the camera by turning it counterclockwise.  
3. Unlock the Zoom or Focus lever before adjusting the lens.  
4.Adjust the zoom & focus by moving the lever counterclockwise for (NEAR & TELE)  
and clockwise for (WIDE & FAR) position.  
5.After adjustment, tighten the zoom or focus levers, taking care not to adjust the  
zoom/focus position.  
BACK  
6. Please, close and tighten the front cover.  
7.Replace the sunshield.  
SOC-4160  
Front cover  
ZOOM lever  
8
Focus lever  
9
Notes  
9
Power input terminal : Connect the power as specified for each model here.  
Video output terminal : Video signals are output through this port. Connect  
• If the front cover is cross threaded or not correctly tightened the camera housing  
will not be weatherproof.  
• When you combine the front cover, combine the triangle of front cover and triangle  
of main body confront each other.  
this port to the Video IN port of a monitor.  
RS-485 control terminal :  
You can control SETUP MENU through this port by using external controllers like a  
Remote controller that RS-485 Communication is supported. For details, see page 14.  
COLOR CCD CAMERA  
COLOR CCD CAMERA  
User Guide  
11  
UseDr Gouiwdenload from Www.Somanuals.com. All Manuals Search And Download.  
10  
Connection  
Connecting to Power  
Connecting to Monitor  
The recommended adaptor specification for SOC-4160N/P is DC 12V/ 500mA ,  
AC 24V / 500mA.  
Please check the standard power requirement before connecting the power.  
Recommend AC24A / 500mA adaptor for a long-distance.  
Please connect the video output terminal located on the back of the camera to the  
monitor.  
Monitor  
CCD Camera  
• The connection method varies depending on the type of monitor and accessories.  
Please refer to the user's manual for each instrument.  
When the resistance value of copper wire is at [20°C(68°F)]  
• Please turn off the power when connecting.  
• Please select Hi-Z on the 75Ω/Hi-Z switch for the intermediate video TV set and  
select 75Ω for the Intermediate device as shown in the picture below.  
#24(0.22mm2)  
0.078  
#22(0.33mm2)  
0.050  
#20(0.52mm2)  
0.030  
#18(0.83mm2)  
0.018  
Copper wire size(AWG)  
Resistance value(Ω/m)  
Voltage drop(V/m)  
0.028  
0.018  
0.011  
0.006  
• As shown in the table above, voltage decreases as the wire gets longer.  
Therefore having an excessively long distance between the power adaptor and the  
camera may affect the camera's performance.  
Intermediate  
End monitor  
Standard voltage for camera operation : DC 12V±10% / AC 24V±10%  
There may be some deviation in voltage drop depending on the type of wire and the manufacturer.  
CCD Camera  
Notes  
• Please use a power adaptor that meets the required standards.  
• Please connect the power after installation.  
COLOR CCD CAMERA  
COLOR CCD CAMERA  
User Guide  
13  
UseDr Gouiwdenload from Www.Somanuals.com. All Manuals Search And Download.  
12  
Connection  
RS-485 communication control  
Connecting to RS-485 Control Cable  
Using Coaxial Communications  
Coaxial Communications System  
OSD Control method  
CAMERA  
SET  
DVR  
MENU/ENTER  
UP KEY  
CONTROLLER  
OSD KEY  
CONTROL CABLE  
WHITE (TRX+)  
BLCAK (TRX-)  
SPEC  
RS-485+  
UP  
JOYSTICK UP  
RS-485-  
DOWN  
LEFT  
DOWN KEY  
LEFT KEY  
JOYSTICK DOWN  
JOYSTICK LEFT  
JOYSTICK RIGHT  
RIGHT  
RIGHT KEY  
Using RS-485 communication will enable you to control the OSD menu from a SAMSUNG  
TECHWIN System Controller or DVR.  
DVR  
(1) Connection to a PC.  
DVD  
Connect the camera to the PC via a RS-485 converter using RS-485 and a serial cable.  
EX) SERIAL PORT OF THE PC(COM1) SERIAL CABLE RS-485 CONVERTER RS-485  
CONTROL CABLE  
0
416  
SOC-  
(2) Connection to a DVR or System Controller.  
Connect the RS-485 cable to the connection ports of the DVR or System Controller.  
: BNC  
---- : RS-485  
485 Control Board Connection Port  
(+) CONNECTION TERMINAL  
RS-485 Control Port  
WHITE (TRX+)  
– Video Cable  
(-) CONNECTION TERMINAL  
BLACK (TRX-)  
The camera's video output port is connected to the monitor with a BNC coaxial cable,  
shown below : If the distance between the camera and the monitor exceeds the  
recommended maximum, please use an auxiliary video amp.  
* RS-485 Communication establishment initial value  
Camera ID  
1
BAUD RATE  
9600  
UART MODE  
8-NONE-1  
RET PKT  
ENABLE  
Item  
Initial value  
Distance  
300m  
450m  
600m  
Recommended Cable Specification  
3C2V(RG-59/U)  
5C2V(RG-6/U)  
7C2V(RG-11/U)  
Notes  
When making a control system to control the camera, please use to the  
protocol(STW(SPD), PELCO-P, PELCO-D, VICON, PANASONIC, BOSCH, HONEYELL, SEC).  
Notes  
• When you connecting to RS-485 CONTROL TERMINAL, please peel off the outer  
skin inside the RS-485 CONTROL TERMINAL.  
• If the camera is controlled through coaxial communication, please use a video amp  
intended for coaxial communications. Regular video amps do not transfer coaxial  
signals.  
In case of SCC-101 connection, change communication mode to8-E-1atCommunication  
configurationmenu. (For more information, refer to SCC-101 manual.)  
COLOR CCD CAMERA  
COLOR CCD CAMERA  
User Guide  
15  
UseDr Gouiwdenload from Www.Somanuals.com. All Manuals Search And Download.  
14  
Operating Your Camera  
Menu Configuration  
MAIN SETUP  
Select the function using  
the Function Setup switch.  
1.LENS  
DC  
Change the status using  
the Function Setup switch.  
MAIN SETUP  
2.EXPOSURE  
3.WHITE BAL  
4.SSDR  
ATW  
OFF  
OFF  
ON  
LENS  
DC  
… ●  
………  
AGC  
BRIGHTNESS  
SHUTTER  
5.BACKLIGHT  
6.SSNR3  
EXPOSURE  
SENS-UP  
RETURN  
7.DAY/NIGHT  
8.SPECIAL  
9.EXIT  
AUTO  
● …  
INDOOR  
ATW  
OUTDOOR  
AWCSET  
ON  
WHITE BAL  
MANUAL  
SAVE  
OFF  
OFF  
OFF  
SSDR  
BACKLIGHT  
SSNR3  
BLC  
HLC  
2. Select a desired function using the Function Setup switch.  
• Place the cursor over a desired item.  
3. Set up a selected item by using the Function Setup switch.  
ON  
B/W  
DAY/NIGHT  
COLOR  
AUTO  
SYNC  
DIS  
4.To finish the setting, select ‘EXIT’ and press the Function Setup switch.  
… ●  
IMAGE ADJ.  
MOTION DET  
COMM ADJ  
CAM TITLE  
… ●  
SPECIAL  
EXIT  
PRIVACY  
Notes  
… ●  
LANGUAGE  
RETURN  
RESET  
• An item with the…  
icon also has sub menus. To select a sub menu, select an item with  
the icon and press the Function Setup switch.  
• An item with the - - - icon is unavailable due to function settings.  
NOT SAVE  
SAVE  
Menu Setup  
Use the Function Setup Switch whitin the camera.  
LENS  
Using this function, you can control the screen brightness.  
1.When the SETUP menu screen is displayed, selectLENSby using the Function Setup  
switch so that the arrow indicatesLENS.  
2. DC :You can adjust the minimum shutter and maximum value of ESC shutter mode.  
MAIN SETUP  
1.LENS  
DC  
2.EXPOSURE  
1. Press the Function Setup switch.  
• Main setup menu is displayed on the monitor screen.  
3.THE Lens mode has sub menu items as listed below.  
- BRIGHTNESS :Adjusts the video brightness.  
COLOR CCD CAMERA  
COLOR CCD CAMERA  
User Guide  
17  
UseDr Gouiwdenload from Www.Somanuals.com. All Manuals Search And Download.  
16  
Operating Your Camera  
Notes  
- FOCUS ADJ :To adjust the DC lens focus correctly, you must activate the Focus Settings  
mode under each lens menu. Activate the Focus Settings mode, adjust  
the lens focus, and then deactivate the settings mode.  
• When the SHUTTER is set to MANUAL or A.FLK mode, SENS-UP will be disabled.  
AGC(AUTO GAIN CONTROL) :The higher the gain level, the brighter the screen - but  
the higher the noise.  
Notes  
- OFF : Deactivates the AGC function.  
- LOW :Allows automatic gain control from 5.3dB to 32dB.  
- HIGH :Allows automatic gain control from 5.3dB to 37dB.  
• If color rolling occurs when using a DC lens, set Shutter to Fixed (---).  
SENS-UP :When it is night or dark, the camera automatically detects the light level  
and maintains a clear picture if this mode is activated.  
- OFF : Deactivates the SENS-UP function.  
EXPOSURE  
MAIN SETUP  
- AUTO :Activates the SENS-UP function.  
1.LENS  
DC  
RETURN : Select this to save the changes in the EXPOSURE menu and return to the  
2.EXPOSURE  
3.WHITE BAL  
SETUP menu.  
ATW  
Notes  
1.When the SETUP menu screen is displayed, select 'EXPOSURE' by using the Function  
Setup Switch.  
• If you press the Function Setup switch to ‘AUTO’ mode, you can adjust brightness by increasing or  
decreasing the shutter speed. (x2 ~ x512)  
2. Select a desired mode using the Function Setup switch.  
• Note that the higher the zoom level, the brighter the screen, but the more likely there will be a  
ghosting effect.  
EXPOSURE SETUP  
1.BRIGHTNESS  
2.SHUTTER  
3.AGC  
25  
---  
• It is normal for Noise, Spots and Whitish symptoms to appear in SENS-UP mode when the  
D-ZOOM level is increased.  
HIGH  
OFF  
4.SENS-UP  
5.RETURN  
White Balance (White Bal)  
Use the White Balance function to adjust the screen color.  
1.When the SETUP menu screen is displayed, select ‘White Bal’ by using the Function  
Setup switch so that the arrow indicates ‘White Bal’.  
2. Select a desired mode using the Function Setup switch.  
SHUTTER :You can select either auto or manual shutter.  
- ---  
: Shutter speed is fixed at 1/60sec(1/50sec)  
- ESC  
: Select this to control the shutter speed automatically. If ESC is selected, the  
shutter speed is automatically controlled depending on the ambient  
illumination of the subject.  
MAIN SETUP  
1.LENS  
DC  
- MANUAL :You can control shutter speed manually.  
2.EXPOSURE  
3.WHITE BAL  
4.SSDR  
(NTSC MODEL : 1/60~1/120,000, PAL MODEL : 1/50~1/120,000)  
ATW  
OFF  
- A.FLK  
: Select this when you see picture flicker, this can happen when the frequency  
of the local lighting clashes with the camera.  
COLOR CCD CAMERA  
COLOR CCD CAMERA  
User Guide  
19  
UseDr Gouiwdenload from Www.Somanuals.com. All Manuals Search And Download.  
18  
Operating Your Camera  
Select one of the following 5 modes, as appropriate for your purpose.  
1. When the SETUP menu screen is displayed, select ‘SSDR’ by using the switch so that  
the arrow indicates ‘SSDR’.  
2. Use the switch to change the SSDR level according to the contrast between bright  
and dark areas.  
ATW  
: Select this when the color temperature is between 1,700˚K and 11,000˚K.  
OUTDOOR : Select this when the color temperature is between 1,700˚K and 11,000˚K.  
(sodium light inclusion)  
INDOOR  
: Select this when the color temperature is between 4,500˚K and 8,500˚K.  
MANUAL : Select this to fine-tune White Balance manually. Set White Balance first  
by using the ATW or AWC mode. After that switch to MANUAL mode,  
fine-tune the White Balance and then press the Function Setup switch.  
AWC SET :To find the optimal luminance level for the current environment, point  
the camera towards a sheet of white paper and press the Function Setup  
switch. If the environment changes, readjust it.  
SSDR ON  
SSDR OFF  
Notes  
• White Balance may not work properly under the following conditions. In this case  
select the AWC mode.  
When the color temperature of the environment surrounding the subject is out  
of the control range (e.g. clear sky or sunset).  
2
When the ambient illumination of the subject is dim.  
BACKLIGHT  
3
If the camera is directed towards a fluorescent light or is installed in a place  
Unlike conventional cameras, the SOC-4160 is designed to deliver a distinctive subject and  
background at the same time, even when the subject is backlight, by using the features of  
the proprietary W-V DSP chip.  
1.When the SETUP menu screen is displayed, select ‘BACKLIGHT’ by using the Function  
Setup switch so that the arrow indicates ‘BACKLIGHT’.  
where illumination changes dramatically, the White Balance operation may  
become unstable.  
SSDR (Samsung Super Dynamic Range)  
MAIN SETUP  
SSDR illuminates darker spots of an image while retaining the same light level for brighter  
spots to even out the overall brightness of images with high contrast between bright and  
dark spots.  
1.LENS  
DC  
2.EXPOSURE  
3.WHITE BAL  
4.SSDR  
ATW  
OFF  
OFF  
MAIN SETUP  
5.BACKLIGHT  
1.LENS  
DC  
2.EXPOSURE  
3.WHITE BAL  
4.SSDR  
ATW  
OFF  
OFF  
2. Select a desired mode using the Function Setup switch.  
BLC : Enables a user to directly select a desired area from a picture, and to view the  
area more clearly.  
5.BACKLIGHT  
COLOR CCD CAMERA  
COLOR CCD CAMERA  
User Guide  
21  
UseDr Gouiwdenload from Www.Somanuals.com. All Manuals Search And Download.  
20  
Operating Your Camera  
HLC (High Light Compensation) :  
SSNR3  
If the scene contains extremely bright light areas such as; from car headlights, the  
light can mask out much of the on-screen detail.  
- LEVEL :Adjust level of the HLC function.  
- LIMIT : Enable to change the operating condition.  
- MASK COLOR/TONE : Change the color / transparency of the masking area.  
(Black, Red, Blue, Cyan, Magenta)  
This function reduces the background noise in a low luminance environment.  
1.When the SETUP menu screen is displayed, select ‘SSNR3’ by using the Function  
Setup switch so that the arrow indicates ‘SSNR3’.  
MAIN SETUP  
- TOP/BOTTOM/LEFT/RIGHT :Adjust the area to be enhanced  
1.LENS  
DC  
OFF : Not being used  
2.EXPOSURE  
3.WHITE BAL  
4.SSDR  
ATW  
OFF  
OFF  
ON  
3. Select a desired mode using the Function Setup switch and press the Function Setup switch.  
Select ‘BLC’ to adjust the area to be  
enhanced then adjust the level.  
HLC : Enable the user to change the level,  
5.BACKLIGHT  
6.SSNR3  
limit, mask color/tone and area.  
7.DAY/NIGHT  
AUTO  
LOW  
2. Select a desired mode using the Function Setup switch.  
OFF: Deactivates SSNR3. Noise is not reduced.  
ON :Activates SSNR3 so that noise is reduced.  
3. Set the SSNR3 mode to ‘ON’ and press the Function Setup switch. Then you can  
adjust the noise reduction level.  
Notes  
Notes  
• Because there can be a difference in the effectiveness of HLC according to the amount of  
light area in the screen, optimize the installation angle for the best HLC performance.  
• When dark, the HLC is only activated when a bright light exceeding a specific size in  
NIGHT ONLY mode.  
• The HLC is not activated in day light or when bright light is not present at night in NIGHT  
ONLY mode.  
• You cannot set the SSNR3 to ‘ON’ or ‘OFF’ when the AGC mode of the  
EXPOSURE menu is ‘OFF’.  
• When adjusting the noise reduction level in the SSNR3 mode, remember that  
the higher the level set, the more the noise level will be reduced, as will the  
brightness of the image.  
COLOR CCD CAMERA  
COLOR CCD CAMERA  
User Guide  
23  
UseDr Gouiwdenload from Www.Somanuals.com. All Manuals Search And Download.  
22  
Operating Your Camera  
- BURST MODE :You can turn on or off the burst signal on  
B/W mode.  
- DURATION :You can select brightness of illumination  
about changing the day/night mode.  
- DWELL TIME :You can select the duration time about  
changing the day/night mode. …  
DAY/NIGHT  
AUTO SETUP  
1.BURST MODE  
2.COLOR→B/W  
DURATION  
DWELL TIME  
3.B/W→COLOR  
DURATION  
ON  
FAST  
3SEC  
You can display pictures in color or black and white.  
1.When the SETUP menu screen is displayed, select ‘DAY/NIGHT’ by using the Function  
Setup switch so that the arrow indicates ‘DAY/NIGHT’ .  
FAST  
10SEC  
DWELLTIME  
4.RETURN  
3s, 5s, 7s, 10s, 15s, 20s, 30s, 40, 60s  
MAIN SETUP  
Color B/W  
2.5 lux  
B/W Color  
5 lux  
10 lux  
1.LENS  
2.EXPOSURE  
DC  
Fast  
Slow  
* The day/night switching point of the camera  
can be adjusted.  
1 lux  
3.WHITE BAL  
4.SSDR  
5.BACKLIGHT  
6.SSNR3  
ATW  
OFF  
OFF  
ON  
Notes  
7.DAY/NIGHT  
8.SPECIAL  
AUTO  
• When AGC in the EXPOSURE menu is 'OFF', '---' mode operates as like selecting 'COLOR'  
mode and 'AUTO' mode can not be selected.  
2. Select a desired mode using the Function Setup Switch according to the picture display  
you want.  
COLOR :The picture is always displayed in color.  
B/W : The picture is always displayed in black and white.  
- BURST MODE :You can turn on or off the burst signal on  
B/W MODE SETUP  
1.BURST MODE  
2.RETURN  
ON  
B/W mode.  
AUTO :The mode is switched to ’Color‘ in a normal environment, but switches to ’B/  
W‘ mode when ambient illumination is low.To set up the switching time for  
AUTO mode, press the Function Setup switch.You can turn on or off the burst  
signal on B/W mode.  
COLOR CCD CAMERA  
COLOR CCD CAMERA  
User Guide  
25  
UseDr Gouiwdenload from Www.Somanuals.com. All Manuals Search And Download.  
24  
Operating Your Camera  
IMAGE ADJ. :  
SPECIAL  
1) When the SETUP menu screen is displayed, select ‘IMAGE ADJ’ by using the Function  
Setup switch so that the arrow indicates ’IMAGE ADJ‘.  
2) Select a desired mode using the Function Setup switch.  
1.When the SETUP menu screen is displayed, select ‘SPECIALby using the Function Setup  
switch so that the arrow indicates ‘SPECIAL.  
IMAGE SETUP  
MAIN SETUP  
1.V-REV  
2.H-REV  
3.D-ZOOM  
4.FONT COLOR  
5.SHARPNESS  
6.MONITOR  
7.RETURN  
OFF  
OFF  
OFF  
WHITE  
ON  
LCD  
1.LENS  
DC  
2.EXPOSURE  
3.WHITE BAL  
4.SSDR  
ATW  
OFF  
OFF  
ON  
5.BACKLIGHT  
6.SSNR3  
7.DAY/NIGHT  
8.SPECIAL  
9.EXIT  
AUTO  
V-REV :You can flip the picture vertically on the screen.  
H-REV :You can flip the picture horizontally on the screen.  
D-ZOOM :You can use a digital zoom of x1 ~ x16.  
FONT COLOR :You can change the OSD font color. (White,Yellow, Green, Red, Blue)  
SHARPNESS :As you increase this value, the picture outline becomes stronger and  
clearer. Adjust this value appropriately depending on the sharpness of  
the picture.  
MONITOR : Please change the settings value of video  
appropriate to your monitor.  
- LCD : Please select this menu item when using a LCD  
monitor.  
- CRT : Please select this menu item when using a CRT  
monitor.  
- USER : Please use this menu item when using a monitor other than standard ones.You  
can change the gamma, PED level, and color gain in the sub menus.  
RETURN : Select this to save the settings for the IMAGE ADJ menu and to return to  
the SETUP menu.  
SAVE  
2. Select a desired mode using the Function Setup switch.  
SPECIAL  
1. IMAGE ADJ  
2. CAM TITLE  
3. SYNC  
4. MOTION DET  
5. PRIVACY  
6. DIS  
7. COMM ADJ  
8. LANGUAGE  
9. RETURN  
OFF  
INT  
OFF  
OFF  
OFF  
ENGLISH  
Notes  
• When the V-REV or H-REV mode is enabled, the text on the screen does not flip.  
• If you increase the SHARPNESS level too high, the picture may become distorted  
or noise may appear.  
COLOR CCD CAMERA  
COLOR CCD CAMERA  
User Guide  
27  
UseDr Gouiwdenload from Www.Somanuals.com. All Manuals Search And Download.  
26  
Operating Your Camera  
CAM TITLE : If you enter a title, the title will appear on the monitor.  
1) If the SPECIAL menu screen is displayed, use the Function Setup switch so that the  
arrow indicates ‘CAM TITLE’.  
SYNC : In areas where the supply is at 60Hz(NTSC),  
50Hz(PAL), you can synchronize the output phase  
of multiple cameras using the power  
synchronization function (Line-Lock) without using  
a synchronization signal generator.  
- INT : Internal Synchronization Type  
- L/L : Power Synchronization Type, Line-lock  
• Press the Function Setup switch.  
You can select a desired phase from 0 to 359 when select 'phase'.  
CAMERA TITLE SETUP  
2) Set it to ‘ON’ by using the Function Setup switch.  
3) Press the Function Setup switch.  
4) Use the Function Setup switch to move to  
a desired letter and select the letter by  
ABCDEFGHIJKLM  
NOPQRSTUVWXYZ  
abcdefghijklm  
nopqrstuvwxyz  
- . 0 1 2 3 4 5 6 7 8 9  
pressing the Function Setup switch.  
← → C L R P O S E N D  
Repeat this to enter multiple letters. You  
can enter up to 15 letters.  
5) Enter a title, move the cursor to ‘POS’ and  
Notes  
press the Function Setup switch. The  
entered title appears on the screen. Select  
• When using AC power at 60Hz(NTSC), 50Hz(PAL), frequency, you can use the L/L  
type synchronization.  
• When the power is DC 12V, the SYNC menu is fixed to the ‘INT’ mode.  
FRONT DOOR  
the position to display the title on the  
screen by using the Function Setup switch  
and press the Function Setup switch.  
When the position is determined, select  
‘END’ and press the Function Setup switch  
to return to the SPECIAL menu.  
:
MOTION DET  
This product has a feature that allows you to observe  
movement of objects in 8 different areas on the screen,  
and the words 'MOTION DETECTED' appear on the screen  
when movement is detected.  
Activity can be monitor more efficiently.  
1) When the SPECIAL menu screen is displayed, press the  
Function Setup switch so that the arrow indicates‘MOTION DET’.  
2) Set up the mode using the Function Setup switch.  
- SENSITIVITY : You can select up to 8 MD areas.When SENSITIVITY number is high, motion  
detection sensitivity is increased to recognize even small movement.  
Notes  
• When the CAM TITLE menu is ‘OFF’, no title will be displayed on the monitor screen  
even if you enter one.  
• Only English is available in this mode.  
• If you move the cursor to CLR and press the Function Setup switch, all the letters  
are deleted. To edit a letter, change the cursor to the bottom left arrow and press  
the Function Setup switch. Move the cursor over the letter to be edited, move the  
cursor to the letter to be inserted and then press the Function Setup switch.  
- AREA MODE : Determines whether to use the MD area selected in SENSITIVITY.  
- SEL POS : Determines which of the 4 vertices of each MD area is to be used.  
- XPOS : Determines the coordinate of the horizontal axis for SEL POS.  
- YPOS : Determines the coordinate of the vertical axis for SEL POS.  
- FILLSET : Fills in a selected MD area. The color of the area can be selected from  
brown, orange, blue, cyan, green, yellow, magenta and red.  
- RETURN : Select this to save the MOTION DET menu settings and return to the SPECIAL menu.  
COLOR CCD CAMERA  
COLOR CCD CAMERA  
User Guide  
29  
UseDr Gouiwdenload from Www.Somanuals.com. All Manuals Search And Download.  
28  
Operating Your Camera  
PRIVACY : Mask an area you want to hide on the screen.  
COMM ADJ (Communication Adjustment) :  
This function sets up the camera communication status when controlling the camera  
PRIVACY AREA SETUP  
through an external control device.  
1.AREA  
2.MODE  
AREA1  
OFF  
GREEN  
1
39  
79  
1) When the SPECIAL menu screen is displayed, press the Function Setup switch  
so that the arrow indicates ‘COMM ADJ’.  
3.MASK COLOR  
4.MASK TONE  
5.TOP  
6.BOTTOM  
7.LEFT  
2) Set up the mode using the Function Setup witch.  
- CAM ID : Determines the camera's identification  
number (between 0 and 255).  
- BAUD RATE :You can select 2400/4800/9600/19200  
/38400/57600 bps.  
- UART MODE :You can select NONE, EVEN or ODD  
for the parity bits.  
13  
52  
8.RIGHT  
9.RETURN  
- RET PKT : Determines whether to send a command  
back to the controller device when a  
communication control command is sent to the camera.  
- DISP ID : Display camera title on top left corner of the screen.  
- PROTOCOL :You can select one of various protocols. STW(SPD), PELCO-P, PELCO-D,  
VICON, PANASONIC, BOSCH, HONEYWELL, SEC.  
1) When the SPECIAL menu screen is displayed, press the Function Setup switch so  
that the arrow indicates ‘PRIVACY’.  
2) Set up the mode using the Function Setup switch.  
- AREA :You can select up to 12 PRIVACY areas.  
- MODE : Determines whether to use the area selected in the AREA.  
-
MASK COLOR : Determine area color.You can select Green, Red, Blue, Black,White, Gray.  
* Initial value of communication adjustment  
- MASK TONE :Adjust the brightness of MASK COLOR.  
- TOP/BOTTOM/LEFT/RIGHT :Adjust the size and position of the selected area.  
-
Item  
Camera ID  
1
BAUD RATE UART MODE  
9600 8-NONE-1  
PET PKT  
ENABLE  
Initial value  
RETURN : Select this to save the PRIVACY menu settings and return to the SPECIAL menu.  
DIS (Digital Image Stabilizer) :  
This function mitigates any picture movement due to external factors such as wind.  
LANGUAGE :You can select the menu language according to your requirements.  
RETURN : Select this to save the SPECIAL menu settings and return to the MAIN  
SETUP menu.  
EXIT  
Select a desired EXIT mode using the Function Setup Switch.  
- SAVE : Save the current settings and exit the MAIN SETUP menu.  
- NOT SAVE : Do not save the current settings and exit the MAIN SETUP menu.  
Notes  
• As the DIS function uses the digital zoom the camera's resolution will decrease.  
• DIS doesn’t operate when background illumination is too low.  
• DIS doesn’t operate when object pattern is monotonic as like sky or white wall.  
- RESET  
:
Resets the camera settings to the factory defaults. Language, Communication  
and Monitor settings are not initialized.  
COLOR CCD CAMERA  
COLOR CCD CAMERA  
User Guide  
31  
UseDr Gouiwdenload from Www.Somanuals.com. All Manuals Search And Download.  
30  
Troubleshooting  
Specifications  
SOC-4160N  
SOC-4160P  
If there are problems in operation, please refer to the items below. If the  
problem persists, please contact the agent you purchased this product from.  
ELECTRICAL  
Input Voltage  
Power Consumption  
VIDEO  
Imaging Device  
Total Pixels  
Effective Pixels  
Scanning System  
Synchronization  
Frequency  
DC 12V / AC 24V  
MAX 2.7W / 3.8W  
Nothing appears on the screen.  
1/3 inch, Diagonal 6mm Super HAD CCD  
811(H) x 508(V)  
768(H) x 494(V)  
2:1 Interlace  
Internal /Line-Lock  
H : 15.734KHz V:59.94Hz  
COLOR : 600TVL, B/W : 700TVL  
COLOR : 0.15Lux (50IRE, @F1.2), 0.0003Lux (SENE-UP, x512)  
B/W : 0.001Lux (50IRE, @F1.2), 0.000002Lux (SENS-UP, x512)  
52dB (Weight On, AGC Off)  
Check that the power cord and line connection between the camera and monitor are  
fixed properly.  
795(H) x 596(V)  
752(H) x 582(V)  
Check that you have properly connected UTP cable or BNC cable to the camera.  
H: 15.625KHz V: 50.00Hz  
The image on the screen is dim.  
Is lens stained with dirt? Clean your lens with soft, clean cloth.  
Set the monitor to proper condition.  
Horizontal Resolution  
Min. Illumination  
S/N (Y Signal)  
Video Output  
LENS  
Zoom Ratio  
Focus Length  
Angular Field of View  
OPERATIONAL  
If the camera is exposed to too strong light, change the camera position.  
CVBS : 1.0Vp-p, 75Ω composite  
The image on the screen is dark.  
Adjust the contrast feature of the monitor.  
3.6x (Manual)  
2.8 ~ 10.0mm (F1.2)  
H : 94.4°(Wide)~28°(Tele) / V : 69.2°(Wide)~21°(Tele)  
If you have an intermediate device, set the 75Ω / Hi-z properly.  
Electronic Shutter Speed  
On Screen Display  
SSDR  
Backlight Compensation  
Day & Night  
1/60 ~ 1/120k sec  
1/50 ~ 1/120k sec  
The camera is not working properly, and the surface of the camera is hot.  
NTSC : 7 Languages, PAL : 15 Languages  
On / Off (Level adjustable)  
BLC / HLC / OFF  
COLOR / B/W / AUTO (ICR)  
Low / High / Off  
ATW / Outdoor / Indoor / Manual / AWC (1,700°K ~ 11,000°K)  
Auto / Off (Selectable x2 ~ x512)  
On / Off (8 Programmable zones)  
On / Off (12 Programmable zones)  
On / Off (Level adjustable)  
On / Off (x1 ~ x16)  
On / Off  
On / Off (Displayed 15 Characters)  
On / Off (Level adjustable)  
On / Off  
Check that you have properly connected the camera to an appropriate power source.  
The SENS-UP function does not work.  
Check that AGC of EXPOSURE SETUP menu is ‘OFF’.  
Check that SHUTTER of EXPOSURE SETUP menu is A.FLK’ or ‘MANUAL’.  
Gain Control  
White Balance  
SENS-UP (frame Integration)  
Motion Detection  
Privacy Masking  
3D Noise Filter (SSNRIII)  
Digital Zoom  
Digital Image Stabilization(DIS)  
Camera Title  
Sharpness  
The Motion Detection function does not work.  
Check that MOTION DET of SPECIAL SETUP menu is ‘OFF’.  
Color is not correct.  
Check the setting of WHITE BAL SETUP menu.  
Flip / Mirror  
Communication  
The screen flickers continually.  
Check that direction of camera turns toward the Sun.  
Coaxial, RS-485  
Coaxial(Pelco), RS-485(STW(SPD), PELCO-P, PELCO-D, VICON, PANASONIC,  
BOSCH, HONEYWELL, SEC)  
Protocol  
When coaxial communication is not available:  
ENVIRONMENTAL  
Operating Temperature / Humidity  
Storage Temperature / Humidity  
MECHANICAL  
Water Resistance  
Dimension  
-10°C ~ +50°C / 30% ~ 80% RH  
-20°C ~ +60°C / 20% ~ 90% RH  
Make sure that the camera and monitor are installed within the recommended distance.  
Use the video amplifier equivalent to coaxitron if the recommended installation distance is  
exceeded.  
IP66  
Ø77mm(W) x 216mm(H) (BRACKET ANGLE 90°), 284mm (BRACKET ANGLE 180°)  
955g  
When the camera is not waterproof.  
Please check the Front Cover and Main Body by the following Guide Label.  
Weight  
The specification for this product may change without prior notice for product improvement.  
COLOR CCD CAMERA  
COLOR CCD CAMERA  
User Guide  
33  
UseDr Gouiwdenload from Www.Somanuals.com. All Manuals Search And Download.  
32  
DECLARATION OF CONFORMITY  
Dimension  
Application of Council Directive(s)  
89 / 336 / EEC  
Manufacturer's Name  
Manufacturer's Address  
SAMSUNG TECHWIN CO., LTD  
SAMSUNG TECHWIN CO., LTD  
42, SUNGJU-DONG CHANGWON-CITY,  
KYUNGNAM, KOREA, 641-716  
European Representative Name  
European Representative Address  
Equipment Type/Environment  
Model Name  
Ø77  
86mm  
CCTV Camera  
274.7mm  
SOC-4160P  
Beginning Serial NO.  
C10S8010007  
Year of Manufacture  
2009.08.01  
Conformance to  
EN 50081-1 : 1992  
EMC-Directive 89/336 EEC and 92/31/EEC  
EN 50130-4 : 1996  
Ø79.8  
We, the undersigned, hereby declare that the equipment specified above conforms  
to the above Directive(s).  
Manufacturer SAMSUNG TECHWIN CO., LTD  
Signature  
Legal Representative in Europe  
Signature  
Full Name  
Position  
Place  
Full Name  
Position  
Place  
BONJENG GU  
QUALITY CONTROL MANAGER  
CHANGWON, KOREA  
2009.08.01  
Date  
Date  
244.7mm  
COLOR CCD CAMERA  
COLOR CCD CAMERA  
User Guide  
35  
UseDr Gouiwdenload from Www.Somanuals.com. All Manuals Search And Download.  
34  

Remington Electric Shaver MB 70 User Guide
Roberts Radio Radio RD 28 User Guide
Rockford Fosgate Stereo Amplifier 1252 User Guide
Royal Sovereign Laminator 1650C User Guide
Saint Gobain Vidros Water Pump PFD4 User Guide
Salton Coffeemaker FSCM200BM, FSCM200M, FSCM200RM, FSCM200CBM User Guide
Samsung Digital Camera ST71 User Guide
Sansui Flat Panel Television SLED4650 User Guide
Sanyo Projector PLC WL2503A User Guide
Sears Treadmill 831249220 User Guide