Connection Panel(depending on the model)
COLOR TELEVISION
CL29K40PQ/CL29K40MQ/CL29M40MQ
The product color and shape may vary depending on
➢
the model.
Rear Jack
Side Jack
Œ
Œ
´
¨
Owner’s Instructions
Before operating, please read this manual thoroughly,
´
ˇ
ˇ
and retain it for future reference.
ˇ
Register your product at
Control Panel(depending on the model)
Whenever you connect an audio or video system to your
TV, ensure that all elements are switched off. Please be
sure to match the color coded input terminals and cable
jacks.
Please be sure to match the color coded input terminals
and cable jacks.
When both the side and rear jacks (AV IN 2) are
connected to external equipment, the side receives
priority.
➢
➢
The product color and shape may vary depending on
the model.
➢
Front Panel
ΠAudio/Video Output Jacks
ΠS-Video Input Jack
Connect to the audio/video input jacks of a recording VCR.
Connect an S-Video signal from a camcorder or video game.
´ Audio/Video Input Jacks
´ Video Input Jack
Connect to the audio/video output jacks of VCRs, DVD
players and similar devices.
Connect a video signal from a camcorder or video game.
ˇ Component Video Input Jacks (Y, PB, PR)
ˇ Audio Input Jacks
ΠOn-screen menu display
´ Volume adjustment
¨ Channel selection
¨ Remote control sensor
ˆ Indicator (Standby or Timer)
Ø Power on/off
Connect to the Component video outputs of a DVD or DTV
set-top box. 480i video signal input is available.
When using the Component Video input, connect audio jacks
to “AV IN 2 (AUDIO-L/R)”.
Connect audio signals from a camcorder or video game.
¨ VHF/UHF
Connect to an antenna or to a cable TV system.
◆ The ´ and ˇ buttons also have the same function as the
œ/√/†/… buttons on the remote control.
◆ If the remote control no longer works or you have
misplaced it, you can use the controls on the panel of the
TV.
AA68-03858A-03
English - 1
Download from Www.Somanuals.com. All Manuals Search And Download.
5
6
After all available
Setup - Plug & Play
Input -
Source List / Edit Name
(depending on the model)
Plug & Play
channels are stored, the
“Clock Set” is displayed.
Press the œ or √ button
to move to the hour or
minute. Set the clock by
pressing the ▲ or ▼ button.
Clock Set
Move
-- : -- am
When the TV is initially powered on, several basic
customer settings proceed automatically and
subsequently.
Enter
Skip
Source List
◆ Source List
The following settings are available.
TV
AV1
AV2
S-Video
Component
You can switch between
viewing signal from
connected equipment,
such as a VCR, DVD,
----
----
----
----
1
Press the POWER
button on the remote
control.
Plug & Play
When you have
Start Plug & Play
OK
finished, press the
MENU button. The
“Enjoy your watching.”
is displayed.
Move
Enter
Return
set-top box, and the TV
source (broadcast or
cable).
The “Start Plug & Play”
is displayed. Press the
ENTER button, then the
“Language” is displayed.
Enjoy your watching.
OK
Enter
Exit
Press the SOURCE button on the remote
control repeatedly to select the desired signal
source.
➢
Plug & Play feature
doesn’t work in the AV mode.
➢
2
3
4
Press the … or † button
to select the desired
language, then press the
ENTER button. The
“Check antenna input.” is
displayed.
Plug & Play
Language
◆ Edit Name
Setup
Re-setting the Plug &
Play
Method: MENU ➜ …/†
(Setup) ➜ ENTER ➜ …/†
(Plug & Play) ➜ ENTER
You can give a name to
the external source.
Edit Name
English
Plug & Play
Language
Time
√
√
√
√
√
√
√
√
Español
Português
Français
: English
AV1
AV2
S-Video
Component
----
----
VCR
DVD
Caption
Child Lock
Blue Screen
Melody
Cable S
T
B
: Off
: On
Move
Enter
Skip
Sat. STB
AV Receiver
DVD Receiver
†
Demonstration
Move Enter
Return
Move
Enter
Return
Make sure that the
antenna is connected to
the TV. Press the
ENTER button, then the
“Auto Program” is
displayed.
Plug & Play
Check antenna input.
OK
Enter
Skip
Press the ENTER button
to start. The TV begins
memorizing all available
channels. Press the
Plug & Play
Auto Program
Air 3
3%
Stop
ENTER button to stop.
Enter
Skip
English - 3
Download from Www.Somanuals.com. All Manuals Search And Download.
Channel - Memorizing the Channels
Channel - FineTune
Setup -Time
Time
◆ Clock
Your TV can memorize and store all of the available
channels for both “off-air” (antenna) and cable
channels. After the available channels are memorized,
The Fine Tuning function lets
you manually adjust the TV’s
tuner if you have difficulty
tuning channels.
Clock
--
:
-- am
Fine Tune
Reset
Setting the clock is
Sleep Timer
On Timer
Off Timer
On Timer Channel
On Timer Volume
: Off
:
:
√
--
--
-- am Off
-- am Off
3 ✽
1
necessary in order to use
the various timer features
of the TV. Also, you can
check the time while
watching the TV. (Just
press the INFO button.)
:
:
3
10
use the CH and CH
channels.
buttons to scan through the
Move
Adjust
Adjust the fine tuning by
pressing the œ or √ button.
Return
Move
Enter
Return
This eliminates the need to change channels by
entering the channel digits. There are three steps for
memorizing channels: “Air/Cable”, “Auto Program”
and “Add/Delete”.
To store the fine tuning setting in the TV’s memory,
press the MENU button.
◆ Sleep Timer
To reset the fine tuning to “0”, select ”Reset” by
pressing the ▲ or ▼ button, then press the ENTER
button.
You can select a time period of between 30 and
180 minutes after which the TV automatically
switches to standby mode.
◆ Air/Cable
Before your TV can begin
memorizing the available
channels, you must
specify the type of signal
source that is connected
to the TV (i.e., an
Channel
Air/Cable
Auto Program
Add/Delete
Fine Tune
Name
:
Air
Cable
Press the SLEEP button on the remote
control repeatedly until the appropriate time
interval appears (any of the preset values
from “30 Min.” to “180 Min.”).
➢
LNA
: Off
Channel - Name
Move
Enter
Return
Use this feature to assign an
easy-to-remember label to
any channel (i.e., “CBS”,
“ESPN”, “PBS2”, “CNN1”,
etc.). A label consists of four
fields, where each field is a
letter (A~Z), a number (0~9),
Name
antenna or a cable
system).
◆ On Timer / Off Timer
… More
2
3
4
5
6
:
:
:
:
:
A
You can set the On/Off timers so that the TV will
switch on or off automatically at the time you
select.
- - - -
- - - -
- - - -
- - - -
Select “Air” or “Cable” by pressing the … or †
button.
† More
You must set the clock first.
➢
Move
Adjust
Return
◆ Auto Program
◆ On Timer Channel
All available channels are
Search
-, or a blank. When the INFO button is pressed, the
channel label will appear next to the channel number.
The preferred channel can be set for when the
timer automatically turns on the TV.
automatically stored in
memory when channels
Air 3
3%
are selected by the direct
tuning function.
Stop
◆ On Timer Volume
Enter
Return
The preferred volume can be set for when the
timer automatically turns on the TV.
Press the ENTER button
at any time to interrupt
the memorization process.
Channel - LNA (depending on the model)
When a weak broadcast
signal causes an unclear,
noisy picture, the “LNA”
feature improves the picture
quality by setting to “On”. If
you experience noise on a
certain channel, set the
Channel
Auto Power Off
☛
Air/Cable
Auto Program
Add/Delete
Fine Tune
Name
: Air
When you set the timer “On”, the TV will
eventually turn off, if no controls are operated for
3 hours after the TV was turned on by timer. This
function is only available in timer “On” mode and
prevents overheating or leakages, which may
occur if a TV is on for too long.
◆ Add/Delete
You can add or delete a
channel to display the
channels you want only.
To use the Add/Delete
function, first run Auto
Program.
Add/Delete
Off
LNA
:
On
… More
2
3
4
5
6
: Deleted
: Added
: Deleted
: Deleted
: Deleted
Move
Enter
Return
† More
“LNA” to “On” or “Off” for this channel, to obtain the
optimum picture.
Move
Enter
Return
Select “Deleted” or
“Added” by pressing the
… or † button.
English - 4
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup - Caption
Setup - Child Lock (depending on the model)
Setup -
Language / Blue Screen /
Melody / Demonstration
Caption
Child Lock
Your TV decodes and
This feature allows you to
prevent unauthorized users,
such as children, from
Caption
Mode
Channel
Field
: On
Child Lock
Channel
Lock
: On
: 11
: ?
displays the closed captions
that are broadcast with
certain TV shows. These
captions are usually subtitles
for the hearing impaired or
foreign-language
translations. All VCRs record the closed caption signal
from TV programs, so home-recorded video tapes
also provide closed captions. Most pre-recorded
commercial video tapes provide closed captions as
well. Check for the closed caption symbol in your TV
: Caption
: 1
: 1
Setup
◆ Language
watching unsuitable
Plug & Play
Language
Time
√
√
√
√
√
√
√
√
When you start using the
TV for the first time, you
must select the language
which will be used for
displaying menus and
indications.
: English
programs by muting out
video and audio. Child Lock
cannot be released using
Move
Enter
Return
Move
Enter
Return
Caption
Child Lock
Blue Screen
Melody
: Off
: On
Demonstration
front panel buttons. Only remote control can release
the Child Lock setting, so keep the remote control
away from children.
Move Enter
Return
◆ Blue Screen
◆ Child Lock: On/Off
If no signal is being received or the signal is very
weak, a blue screen automatically replaces the
noisy picture background. If you wish to continue
viewing the poor picture, you must set the “Blue
Screen” to “Off”.
schedule and on the tape’s packaging:
.
You can activate or deactivate the Child Lock
function.
◆ Caption: On/Off
You can activate or deactivate the Caption
function.
◆ Channel: Channel number to be locked.
Press the CAPTION button on the remote
control repeatedly to select “On” or “Off”.
◆ Lock: When press the ENTER button, the
➢
◆ Melody
“Locked” is displayed.
You can hear melody sound when the TV is
powered on or off.
◆ Mode
If any channel is locked, you can not access to
the “Channel” and “Child Lock” menu by using
the control buttons on the TV panel (the “Not
Available” is displayed in the “Child Lock” menu).
You can access by using the remote control only.
➢
-
In “Caption” mode, captions appear at the
◆ Demonstration
bottom of the screen, and they usually cover
only a small portion of the picture.
In “Text” mode, information unrelated to the
program, such as news or weather, is
displayed. Text often covers a large portion of
the screen.
To become familiar with the various menus
provided by the TV, you can view the in built
demonstration.
-
Each of the menu options is displayed in turn.
When you wish to stop the demonstration, press
any button on the remote control.
◆ Channel / Field
Depending on the particular broadcast, it might be
necessary to make changes to “Channel” and
“Field”.
Different channels and fields display different
information: Field 2 carries additional information
that supplements the information in Field 1.
(For example, Channel 1 may have subtitles in
English, while Channel 2 has subtitles in Spanish.)
Misspellings and unusual characters sometimes
occur during closed caption transmissions,
especially those of live events. There may be a
small delay before captions appear when you
change channels. These are not malfunctions of
the TV.
☛
English - 5
Download from Www.Somanuals.com. All Manuals Search And Download.
◆ Color Tone: Cool2/Cool1/Normal/Warm1/Warm2
You can change the color of the entire screen
according to your preference.
R.Surf Feature
Picture - PIP (depending on the model)
This feature allows you to
set the TV to return to a
particular channel after a
certain amount of time. For
example, you may be
watching a channel when
commercials start. You can
set the R.Surf to “5 minutes”, then switch channels.
After minutes, the TV will return to the original
channel.
You can display a sub picture within the main picture
of TV program or external A/V devices such as VCR
or DVD.
In this way you can watch TV program or monitor the
video input from any connected devices while
watching TV or other video input.
◆ Reset
The previously adjusted picture settings will be
reset to the factory defaults.
Surf
00: 29
◆ Size: Normal/Zoom
You can select the picture size which best
corresponds to your viewing requirements.
PIP
◆ PIP: On/Off (Œ)
PIP
Source
Swap
Size
Position
Channel
: On
: AV1
√
√
√
√
√
You can activate or
deactivate the PIP
function.
Press the P.SIZE button on the remote control
to change the picture size.
➢
: Large
:
: 3
Press the R.SURF button repeatedly to set the timer
in thirty second intervals, up to five minutes.
If the PIP is activated
(On) when the
➢
◆ Digital NR
Move
Enter
Return
If the signal received by the TV is weak, you can
activate this feature to reduce any static and
ghosting that may appear on the screen.
picture size is set to
“Zoom” mode, the picture size is automatically
converted into “Normal” mode. However, you
can select “Zoom” after activating the PIP.
You can hear only the sound of the main
picture while the PIP is activated.
The PIP function is not available in
“Component” mode.
Picture -
◆ DNIe Jr (Digital Natural Image engine Junior)
(depending on the model)
Mode / Custom /
ColorTone / Size /
Digital NR / DNIe Jr / Tilt
➢
➢
This feature bring you more detailed image with
detail enhancement, contrast enhancement and
white enhancement. New image compensation
algorithm gives brighter, clearer, much detailed
image to you.
DNIe Jr technology will fit every signals into your
eyes.
Picture
◆ Mode:
◆ Source
You can select a source of the sub-picture.
Mode
Size
Digital NR
DNIe Jr
Tilt
: Dynamic
: Normal
: Off
: On
: 0
√
√
√
√
Dynamic/Standard
Movie/Custom
You can select the type of
picture which best
corresponds to your
viewing requirements.
PIP
√
◆ Swap (´)
You can interchange the main picture and the sub-
picture.
Move
Enter
Return
◆ Tilt (depending on the model)
If you find that the picture received is slightly tilted
to one side, you can adjust the tilt setting.
Mode
Press the P.MODE
Mode
: Dynamic
√
➢
◆ Size: Small/Large
Contrast
Brightness
Sharpness
Color
:
:
:
:
100
50
75
button on the remote
control to select one
of the standard
You can select a size of the sub-picture.
50
Tint
: G 50 R 50
: Cool1
Color Tone
Reset
√
◆ Position:
/
/
/
√
picture settings.
Move
Enter
Return
You can select a position of the sub-picture.
◆ Contrast/Brightness/
◆ Channel (ˇ)
Sharpness/Color/Tint
You can select a channel of the sub-picture only
when the “Source” is set to “TV”.
The TV has several settings which allow you to
control the picture quality.
Easy functions of the
remote control
English - 6
Download from Www.Somanuals.com. All Manuals Search And Download.
◆ Turbo Plus
Your remote control does not operate your TV.
◆ Make sure the remote has batteries.
◆ Check that the “+” and “-” ends of the batteries
are inserted correctly.
Sound -
This feature emphasizes the bass and treble
frequencies to add fullness to the sound.
Mode / Equalizer / MTS
Auto Volume / Pseudo Stereo /
Turbo Plus
Press the TURBO button on the remote
control repeatedly to select “On” or “Off”.
➢
◆ Check that the batteries are drained.
The TV won’t turn on.
Sound
◆ Mode: Standard/Music/
◆ Make sure the wall outlet is working.
◆ Make sure the TV is plugged in.
◆ Make sure the remote has batteries.
Mode
Equalizer
MTS
Auto Volume
Pseudo Stereo
Turbo Plus
: Custom
√
√
√
√
√
√
Movie/Speech/Custom
Troubleshooting
: Stereo
: Off
: Off
You can select the type of
special sound effect to be
: Off
If the TV seems to have a problem, first try this list of
possible problems and solutions. If none of these
troubleshooting tips apply, then call your nearest
Samsung authorized service center.
used when watching a
Remote control malfunctions
given broadcast.
Move
Enter
Return
◆ Replace the remote control batteries.
◆ Clean the upper edge of the remote control
(transmission window).
Press the S.MODE
➢
button on the remote control to select one of
the standard sound settings.
Poor picture.
◆ Check that the “+” and “-” ends of the batteries
are inserted correctly.
◆ Check that the batteries are drained.
◆ Try another channel.
◆ Adjust the antenna.
◆ Check all wire connections.
◆ Equalizer
The TV has several settings which allow you to
control the sound quality.
If you make any changes to these settings,
the sound mode is automatically switched to
“Custom”.
➢
Poor sound quality.
◆ Try another channel.
◆ Adjust the antenna.
◆ MTS (Multi-channel Television Sound)
Depending on the particular program being
broadcast, you can listen to Mono, Stereo, or SAP.
No picture or sound.
◆ Try another channel.
◆ Press the TV/VIDEO button.
◆ Make sure the TV is plugged in.
◆ Check the antenna connections.
◆ Make sure the MUTE button is off.
Press the MTS button on the remote control
repeatedly to select “Stereo”, “Mono”, or
“SAP” (Secondary Audio Program).
➢
◆ Auto Volume
No color, wrong colors or tints.
◆ Make sure the program is broadcast in color.
◆ Adjust the picture settings.
Each broadcasting station has its own signal
conditions, and so it is not easy to adjust the
volume every time the channel is changed. This
feature lets you automatically adjust the volume of
the desired channel by lowering the sound output
when the modulation signal is high or by raising
the sound output when the modulation signal is
low.
Picture rolls vertically.
◆ Adjust the antenna.
◆ Check all wire connections.
◆ If you are using a VCR, check the tracking.
The TV operates erratically.
◆ Unplug the TV for 30 seconds, then try operating
it again.
◆ Pseudo Stereo
This feature converts a monaural sound signal into
two identical left and right channels. Once the
“Pseudo Stereo” is set to “On” or “Off”, the setting
applies to the sound effects such as “Standard”,
“Music”, “Movie” and “Speech”.
English - 7
Download from Www.Somanuals.com. All Manuals Search And Download.
OSD Map
Important Warranty Information
RegardingTelevision Format Viewing
✽ : It is variable depending on the model.
Input
-
-
Source List
✽
✽
Edit Name
-
VCR / DVD / Cable STB / Sat. STB / AV Receiver / DVD Receiver / Game /
Camcorder / DVD Combo
Standard screen format televisions (4:3, the aspect
ratio of the screen width to height) are primarily
designed to view standard format full-motion video.
The images displayed on them should primarily be in
the standard 4:3 ratio format and constantly moving.
Displaying stationary graphics and images on screen,
such as the dark top and bottom letterbox bars (wide
screen pictures), should be limited to no more than
15% of the total television viewing per week.
Picture
-
Mode
-
-
-
-
Dynamic / Standard / Movie / Custom
Contrast / Brightness / Sharpness / Color / Tint
Color Tone
Reset
-
Cool2 / Cool1 / Normal / Warm1 / Warm2
-
-
-
-
-
Size
Digital NR
-
-
Off / On
Off / On
DNIe Jr
✽
Tilt
PIP
✽
✽
-
-
-
-
-
-
PIP
-
Off / On
Wide screen format televisions (16:9, the aspect ratio
of the screen width to height) are primarily designed
to view wide screen format full-motion video. The
images displayed on them should primarily be in the
wide screen 16:9 ratio format, or expanded to fill the
screen if your model offers this feature, and constantly
moving. Displaying stationary graphics and images on
screen, such as the dark side-bars on non-expanded
standard format television video and programming,
should be limited to no more than 15% of the total
television viewing per week.
Source
Swap
Size
✽
Position
Channel
Sound
Channel
Setup
-
-
-
-
-
-
Mode
Equalizer
MTS
Auto Volume
Pseudo Stereo
Turbo Plus
-
Standard / Music / Movie / Speech / Custom
-
-
-
-
Mono / Stereo / SAP
Off / On
Off / On
Off / On
Additionally, viewing other stationary images and text
such as stock market reports, video game displays,
station logos, web sites or computer graphics and
patterns, should be limited as described above for all
televisions. Displaying any stationary images that
exceed the above guidelines can cause uneven
aging of picture tubes (CRTs) that leave subtle,
but permanent burned-in ghost images in the
television picture. To avoid this, vary the
programming and images, and primarily display
full screen moving images, not stationary
patterns or dark bars. On television models that
offer picture sizing features, use these controls to
view the different formats as a full screen picture.
-
-
-
-
-
-
Air/Cable
Auto Program
Add/Delete
Fine Tune
Name
-
-
Air / Cable
Added / Deleted
LNA
✽
-
Off / On
-
-
-
Plug & Play
Language
Time
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
English / Español / Português / Français
Clock
Sleep Timer
On Timer
Off Timer
On Timer Channel
On Timer Volume
Caption
Mode
Channel
Field
Child Lock
Channel
Lock
-
-
Caption
-
-
-
-
-
Off / On
Caption / Text
1 / 2
Be careful in the selection and duration of television
formats used for viewing. Uneven CRT aging as a
result of format selection and use, as well as other
burned-in images, is not covered by your Samsung
limited warranty.
1 / 2
Child Lock
✽
Off / On
-
-
-
Blue Screen
Melody
Demonstration
Off / On
Off / On
English - 8
Download from Www.Somanuals.com. All Manuals Search And Download.
|