Samsung Blu ray Player BD C6900 User Guide

BD-C6900  
Blu-ray Disc Player  
user manual  
imagine the possibilities  
Thank you for purchasing this Samsung product.  
To receive more complete service,  
please register your product at  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Safety Information  
Warning  
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR BACK).  
NO USER-SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.  
CAUTION  
RISK OF ELECTRIC SHOCK  
DO NOT OPEN  
The lighting flash and Arrowhead within the CAUTION: TO REDUCE THE RISK OF ELECTRIC The explanation point within the triangle  
triangle is a warning sign alerting you of  
dangerous voltage inside the product.  
SHOCK, DO NOT REMOVE COVER (OR BACK)  
is a warning sign alerting you of important  
NO USER SERVICEABLE PARTS INSIDE. REFER instructions accompanying the product.  
SERVICING TO QUALIFIED SERVICE PERSONNEL.  
WARNING  
CLASS 1 LASER PRODUCT  
To reduce the risk of fire or electric shock, do  
This Compact Disc player is classified as a CLASS  
1 LASER product. Use of controls, adjustments  
or performance of procedures other than those  
specified herein may result in hazardous radiation  
exposure.  
not expose this appliance to rain or moisture.  
FCC NOTE (for U.S.A)  
This equipment has been tested and found to  
comply with the limits for a Class B digital device,  
pursuant to Part 15 of the FCC rules. These limits  
are designed to provide reasonable protection  
against harmful interference in a residential  
installation. This equipment generates, uses  
and can radiate radio frequency energy and, if  
not installed and used in accordance with the  
instructions, may cause harmful interference  
to radio or television reception, which can be  
determined by turning the equipment off and on.  
DANGER :  
VISIBLE AND INVISIBLE LASER RADIATION  
WHEN OPEN. AVOID DIRECT EXPOSURE TO  
BEAM. (FDA 21 CFR)  
CAUTION :  
CLASS 3B VISIBLE AND INVISIBLE LASER  
RADIATION WHEN OPEN. AVOID EXPOSURE  
TO THE BEAM (IEC 60825-1)  
THIS PRODUCT UTILIZES A LASER. USE  
OF CONTROLS OR ADJUSTMENTS OR  
PERFORMANCE OF PROCEDURES OTHER  
THAN THOSE SPECIFIED HEREIN MAY  
RESULT IN HAZARDOUS RADIATION  
EXPOSURE. DO NOT OPEN COVER AND DO  
NOT REPAIR YOURSELF. REFER SERVICING  
TO QUALIFIED PERSONNEL.  
The user is encouraged to try to correct the  
interference by one or more of the following measures.  
Reorient or relocate the receiving antenna.  
Increase the separation between the equipment  
and receiver.  
Connect this equipment into an outlet on a  
circuit different from that to which the receiver is  
connected.  
CLASS 1  
KLASSE 1  
LUOKAN 1  
KLASS 1  
LASER PRODUCT  
LASER PRODUKT  
LASER LAITE  
Consult the dealer or an experienced radio/TV  
technician for help.  
This class B digital product meets all  
requirements of the Canadian Interference -  
Causing Equipment Regulations.  
LASER APPARAT  
PRODUCTO LÁSER CLASE 1  
Note to CATV system installer  
NOTE  
If the Region number of a Blu-ray Disc/DVD disc  
does not correspond to the Region number of this  
player, the player cannot play the disc.  
This reminder is provided to call CATV system  
installer’s attention to Article 820-40 of the  
National Electrical Code (Section 54 of Canadian  
Electrical Code, Part I) that provides guidelines  
for proper grounding and, in particular, specifies  
that the cable ground shall be connected to the  
grounding system of the building as close to the  
point of cable entry as practical.  
English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Safety Information  
Precautions  
13. Unplug this apparatus during lightning storms  
or when unused for long periods of time.  
14. Refer all servicing to qualified service  
personnel. Servicing is required when the  
apparatus has been damaged in any way,  
such as power-supply cord or plug is  
Important Safety Instructions  
Read these operating instructions carefully before  
using the unit. Follow all the safety instructions  
listed below.  
damaged, liquid has been spilled or objects  
have fallen into the apparatus, the apparatus  
has been exposed to rain or moisture, does  
not operate normally, or has been dropped.  
Keep these operating instructions handy for future  
reference.  
1. Read these instructions.  
2. Keep these instructions.  
3. Heed all warnings.  
Disc Storage & Management  
4. Follow all instructions.  
Disc Handling  
5. Do not use this apparatus near water.  
6. Clean only with dry cloth.  
Disc Shape  
7. Do not block any ventilation openings. Install  
in accordance with the manufacturer’s  
instructions.  
Use discs with regular  
shapes. If an irregular disc  
(a disc with a special shape)  
is used, this player may be damaged.  
8. Do not install near any heat sources such  
as radiators, heat registers, stoves, or other  
apparatus (including amplifiers) that produce  
heat.  
Holding discs  
Avoid touching the surface of a  
disc where recording is performed.  
9. Do not defeat the safety purpose of the  
polarized or grounding-type plug. A polarized  
plug has two blades with one wider than the  
other. A grounding type plug has two blades  
and a third grounding prong. The wide blade  
or the third prong are provided for your safety.  
If the provided plug does not fit into your  
outlet, consult an electrician for replacement  
of the obsolete outlet.  
Blu-ray Discs  
If the player is not used for a long period of time,  
remove the Blu-ray Disc from the player and  
store it in its case.  
Be careful not to leave fingerprints or scratches  
on the surface of the Blu-ray Disc.  
DVD-VIDEO, Audio CD (CD-DA)  
10. Protect the power cord from being walked on  
or pinched particularly at plugs, convenience  
receptacles, and the point where they exit  
from the apparatus.  
Wipe off dirt or contamination on the disc with a  
soft cloth.  
11. Only use attachments/accessories specified  
by the manufacturer.  
12. Use only with the cart,  
stand, tripod, bracket,  
or table specified by the  
manufacturer, or sold with  
the apparatus. When a cart  
is used, use caution when  
moving the cart/apparatus combination to  
avoid injury from tip-over.  
English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Be sure to remove the disc and turn off the  
player after use.  
Disc Storage  
Be careful not to damage the disc because the  
data on these discs is highly vulnerable to the  
environment.  
Disconnect the AC power cord from the AC  
outlet when you don’t intend to use the player  
for long periods of time.  
Do not keep under direct sunlight.  
Keep in a cool ventilated area.  
Store vertically.  
To clean a disc, wipe it in a straight  
line from the inside to the outside of  
the disc.  
Keep in a clean protection jacket.  
Do not expose the player to any  
liquid.  
If you move your player suddenly from a cold  
place to a warm place, condensation may occur  
on the operating parts and lens and cause  
abnormal disc playback. If this occurs, wait for  
two hours before connecting the plug to the  
power outlet.  
When the AC plug is connected to a wall outlet,  
the player will still draw power (standby mode)  
when it is turned off.  
Apparatus must not be exposed to dripping or  
splashing and no objects filled with liquids, such  
as vases, should be placed on the apparatus.  
Then insert the disc and try to play back again.  
The main plug is used as a disconnect device  
and shall stay readily operable at any time.  
Handling Cautions  
Do not write on the printed side with a ball-point  
pen or pencil.  
Maintenance of Cabinet  
Do not use record cleaning or antistatic sprays.  
Also, do not use volatile chemicals, such as  
benzene or thinner.  
For safety reasons, be sure to disconnect the AC  
power cord from the AC outlet before cleaning.  
Do not use benzene, thinner, or other solvents  
for cleaning.  
Do not apply labels or stickers to discs. (Do not  
use discs fixed with exposed tape adhesive or  
leftover peeled-off stickers.)  
Wipe the cabinet with a soft, dry cloth.  
Do not use scratch-proof protectors or covers.  
Restrictions on Playback  
Do not use discs printed with label printers  
available on the market.  
This player may not respond to all operating  
commands because some Blu-ray, DVD and  
CD discs allow specific or limited operation and  
features during playback.  
Do not load warped or cracked discs.  
Before connecting other components to this  
player, be sure to turn them all off.  
Please note that this is not a defect in the  
player.  
Do not move the player while a disc is being  
played as the disc may be scratched or broken,  
or the player’s internal parts may be damaged.  
Samsung cannot assure that this player will  
play every disc bearing the Blu-ray Disc, DVD  
or CD logo because disc formats evolve, and  
problems and errors may occur during the  
creation of Blu-ray Disc, DVD, CD software  
and/or the manufacture of discs.  
Do not put a flower vase filled with water or any  
small metal objects on the player.  
Be careful not to put your hand into the disc  
tray.  
Do not place anything other than the disc in the  
disc tray.  
Please contact the SAMSUNG customer care  
center if you have questions or encounter  
difficulty in playing Blu-ray, DVD, or CD discs  
in this player. Also, refer to rest of this user  
manual for additional information on playback  
restrictions.  
Exterior interferences such as lightning and  
static electricity can affect the normal operation  
of this player. If this occurs, turn the player  
off and on again with the POWER button, or  
disconnect and then reconnect the AC power  
cord to the AC power outlet. The player will  
operate normally.  
English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Contents  
2
2
Blu-ray Disc Features  
KEy FEATURES  
Blu-ray Disc Player Features  
3
4
4
4
4
Warning  
SAFETy INFORMATION  
Precautions  
Important Safety Instructions  
Disc Storage & Management  
Disc Handling  
10 Before Using the user manual  
GETTING STARTED  
10  
10  
11  
11  
12  
13  
13  
14  
Disc Types and Contents that can be played.  
Disc types that cannot be played  
Blu-ray Disc Compatibility  
Disc Types  
Supported File Formats  
Region Code  
Copyright  
Logos of Discs that can be played  
14 Accessories  
15 Front Panel  
16 Front Panel Display  
17 Rear Panel  
18 Remote Control  
18  
19  
19  
Tour of the Remote Control  
Setting the Remote Control  
Controllable TV Codes  
20 Connecting to a TV  
CONNECTIONS  
20  
21  
22  
23  
Case 1 : Connecting to a TV with an HDMI Cable  
- Best Quality (Recommended)  
Case 2 : Connecting to a TV with a DVI Cable -  
Best Quality (Recommended)  
Case 3 : Connecting to a TV (Component) - Better  
Quality  
Case 4 : Connecting to a TV (Video) - Good  
Quality  
English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Contents  
24 Connecting to an Audio System  
CONNECTIONS  
24  
Case 1 : Connecting to an Audio System  
(HDMI Supported Amplifier) - Best Quality  
(Recommended)  
25  
26  
26  
Case 2 : Connecting to an Audio System (7.1  
Channel Amplifier) - Better Quality  
Case 3 : Connecting to an Audio System (Dolby  
Digital, DTS Amplifier) - Better Quality  
Case 4 : Connecting to an Audio System (2  
Channel Amplifier) - Good Quality  
27 Connecting to the Network  
27  
28  
Cable Network  
Wireless Network  
29 Before Starting (Initial Settings)  
30 Setting the Menu  
31 Display  
SETUP  
31  
32  
32  
32  
34  
34  
34  
34  
34  
3D  
TV Aspect  
BD Wise (Samsung Players only)  
Resolution  
HDMI Format  
Movie Frame (24Fs)  
Progressive Mode  
Still Mode  
HDMI Deep Color  
34 Audio  
34  
35  
36  
36  
36  
36  
Digital Output  
PCM Downsampling  
Dynamic Range Control  
Downmixing Mode  
DTS Neo:6  
Speaker Setting  
37 System  
37  
37  
37  
37  
38  
38  
38  
Initial Settings  
Internet@TV Screen Size  
Anynet+(HDMI-CEC)  
BD Data Management  
Clock  
DivX(R) Registration  
DivX(R) Deactivation  
English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Contents  
38 Network Setup  
SETUP  
38  
42  
42  
Network Settings  
Network Status  
BD-LIVE Internet Connection  
42 Language  
42 Security  
42  
43  
Parental Rating  
Change Password  
43 General  
43  
43  
43  
43  
Background  
Front Display  
Power On/Off Sound  
Light Effect  
44 Support  
44  
44  
Software Upgrade  
Contact Samsung  
45 Playing a Disc  
BASIC FUNCTIONS  
45  
45  
Playback  
Disc Structure  
45 Using the Disc menu/Title menu/Popup menu  
45  
45  
45  
46  
Using the Disc Menu  
Using the Title Menu  
Playing the Title List  
Using the Popup Menu  
46 Using the Search and Skip Functions  
46  
46  
Searching for a Desired Scene  
Skipping Chapters  
46 Slow Motion Play/Step Motion Play  
46  
46  
Slow Motion Play  
Step Motion Play  
47 Repeat Playback  
47  
47  
Repeat the Title or Chapter  
Repeat the Section  
47 Using the TOOLS button  
47  
48  
48  
48  
48  
49  
Moving to a Desired Scene Directly  
Selecting the Audio Language  
Selecting the Subtitle Language  
Changing the Camera Angle  
Selecting the Picture Setting  
Setting BONUSVIEW  
English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Contents  
49 Listening to Music  
BASIC FUNCTIONS  
49  
Buttons on the Remote Control used for Music  
Playback  
50  
50  
50  
Playing an Audio CD (CD-DA)/MP3  
Repeat an Audio CD (CD-DA)/MP3  
Playlist  
51 Playing back a Picture  
51  
51  
Playing a JPEG Disc  
Using the TOOLS button  
52 Playing back a USB Storage Device  
53 Using Internet@TV  
NETWORK SERvICES  
APPENDIx  
53  
55  
56  
Getting Started with Internet@TV  
Settings  
Samsung Apps  
57 BD-LIVE™  
57 Software Upgrade Notification  
57 Using the AllShare Function  
59 Troubleshooting  
62 Index  
63 Specifications  
64  
64  
65  
66  
Compliance and Compatibility Notice  
Copy Protection  
Network Service Disclaimer  
License  
English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Getting Started  
Before Using the user manual  
Disc Types and Contents that can be played.  
Term  
Logo  
Icon  
Definition  
BD-ROM  
This involves a function available on a BD-ROM.  
h
Z
BD-RE/-R  
This involves a function available on a BD-RE/-R disc recorded in the BD-RE format.  
This involves a function available on a DVD-VIDEO.  
DVD-VIDEO  
DVD-RW(V)  
DVD-R  
DVD+RW  
This involves a function available on recorded DVD+RW or DVD-RW(V)/DVD-R/+R  
discs that have been recorded and finalized.  
DVD+R  
Audio CD  
This involves a function available on an audio CD-RW/-R (CD-DA format).  
o
G
MP3  
This involves a function available in a CD-RW/-R, DVD-RW/-R disc or a USB storage  
-
-
WMA  
media containing MP3 or WMA contents.  
This involves a function available in a CD-RW/-R, DVD-RW/-R disc or a USB storage  
media containing JPEG contents.  
JPEG  
DivX  
MKV  
MP4  
This involves a function available in a CD-RW/-R, DVD-RW/-R disc or a USB storage  
media containing DivX, MKV, MP4 contents.  
-
NOTE  
The player may not play certain CD-RW/-R and DVD-R due to the disc type or recording conditions.  
If a DVD-RW/-R disc has not been recorded properly in DVD video format, it will not be playable.  
Disc types that cannot be played  
HD DVD  
DVD-RAM  
DVD-RW(VR mode)  
3.9 GB DVD-R Disc for  
Authoring.  
DVD-ROM/PD/MV-  
Disc, etc  
Super Audio CD  
(except CD layer)  
CVD/CD-ROM/CDV/  
CD-G/CD-I/LD  
(CD-Gs play audio only,  
not graphics.)  
10  
English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
NOTE  
Disc Types  
Some commercial discs and DVD discs purchased  
outside your region may not be playable with this  
player. When these discs are played, either “This  
disc can not be played.” or “Cannot read this disc.  
Please check the regional code of the disc.” will be  
displayed.  
BD-ROM  
This Blu-ray disc can only be played back.  
This player can play back pre-recorded  
commercial BD-ROM discs.  
Playback may not work for some types of discs, or  
when specific operations, such as angle change and  
aspect ratio adjustment, are being performed.  
Information about the discs is written in detail on the  
disc box. Please refer to this if necessary.  
BD-RE/-R  
This Blu-ray disc can be recorded and played  
back.  
This player can play back a BD-RE/-R disc  
recorded by other compatible Blu-ray disc  
recorders.  
Do not allow the disc to become dirty or scratched.  
Fingerprints, dirt, dust, scratches or deposits of  
cigarette smoke on the recording surface may make  
it impossible to use the disc for playback.  
DVD-VIDEO  
Discs with PAL programs recorded on them cannot  
This player can play back pre-recorded  
commercial DVD discs (DVD-VIDEO discs) with  
movies.  
be played using this player.  
This player is compatible with the NTSC color system  
only.  
When switching from the first layer to the  
second layer of a dual-layered DVD-VIDEO disc,  
there may be momentary distortion in the image  
and sound. This is not a malfunction of the  
player.  
When a BD-J title is played, loading may take longer  
than a normal title, or some functions may perform  
slowly.  
This player may not respond to all operating  
commands because some Blu-ray, DVD and CD  
discs allow specific or limited operation and features  
during playback.  
DVD-RW  
This player can play back a DVD-RW disc  
recorded and finalized with a DVD video recorder.  
Ability to play back may depend on recording  
conditions.  
Please note that this is not a defect in the player.  
Samsung cannot assure that this player will play  
every disc bearing the Blu-ray Disc, DVD or CD logo  
because disc formats evolve, and problems and  
errors may occur during the creation of Blu-ray Disc,  
DVD, CD software and/or the manufacture of discs.  
Please contact the SAMSUNG customer care center  
if you have questions or encounter difficulty when  
playing Blu-ray, DVD, or CD discs in this player.  
Also, refer to rest of this user manual for additional  
information on playback restrictions.  
DVD-R  
This player can play back a DVD-R disc recorded  
and finalized with a DVD Video recorder. Ability to  
play back may depend on recording conditions.  
DVD+RW  
This player can play back a DVD+RW disc  
recorded with a DVD Video recorder. Ability to  
play back may depend on recording conditions.  
Blu-ray Disc Compatibility  
Blu-ray Disc is a new and evolving format.  
Accordingly, disc compatibility issues are possible.  
Not all discs are compatible and not every disc will  
play back. For additional information, refer to the  
Compliance and Compatibility Notice section of  
this user manual.  
English  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Getting Started  
DVD+R  
CD-RW/-R  
This player can play back a DVD+R disc  
recorded and finalized with a DVD Video  
recorder. Ability to play back may depend on  
recording conditions.  
Use a 700MB (80 minute) CD-RW/-R disc.  
If possible, do not use a 800MB (90 minute) or  
above disc, as the disc may not play back.  
If the CD-RW/-R disc was not recorded as a  
closed session, you may experience delays  
when playing back the beginning of the disc or  
all recorded files may not play.  
Audio CD (CD-DA)  
This player can play back CD-DA format audio  
CD-RW/-R discs.  
Some CD-RW/-R discs may not be playable  
with this player, depending on the device which  
was used to burn them. For contents recorded  
on CD-RW/-R media from CDs for your  
personal use, playability may vary depending on  
contents and discs.  
The player may not be able to play some  
CD-RW/-R discs due to the condition of the  
recording.  
Supported File Formats  
Video File Support  
File Extension  
Container  
Video Codec  
Audio Codec  
Resolution  
1920x1080  
1920x1080  
1920x1080  
1920x1080  
1920x1080  
1920x1080  
1920x1080  
1920x1080  
1920x1080  
1920x1080  
1920x1080  
1920x1080  
1920x1080  
1920x1080  
1920x1080  
DivX 3.11/4.x/5.1/6.0  
XviD  
MP3  
AC3  
*.avi  
DTS  
AVI  
MP4v3  
WMA  
PCM  
H.264 BP/MP/HP  
VC-1 AP  
MP3  
AC3  
DTS  
DivX 5.1/6.0  
XviD  
*.mkv  
MKV  
H.264 BP/MP/HP  
VC-1 AP  
*.wmv  
*.mp4  
WMA  
AAC  
WMV(wmv9)  
MP4  
VC-1 SM  
MP4 (mp4v)  
H.264 BP/MP/HP  
MPEG1  
MP1, 2  
AC3  
*.mpg  
PS  
MPEG2  
H.264 BP/MP/HP  
*.mpeg  
DTS  
1ꢀ  
English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Music File Support  
Region Code  
Both the player and the discs are coded by region.  
These regional codes must match in order to play  
the disc. If the codes do not match, the disc will  
not play.  
File  
Audio  
Codec  
Container  
Extension  
Support Range  
*.mp3  
MP3  
-
MP3  
The Region Number for this player is described on  
the rear panel of the player.  
Compliant with  
WMA version 10  
* Sampling rates (in  
kHz) - 8, 11, 16,  
22, 32, 44.1, 48  
Region  
Disc Type  
Area  
Code  
*.wma  
WMA  
WMA  
North America, Central America,  
South America, Korea, Japan,  
Taiwan, Hong Kong and South  
East Asia.  
* Bit rates - All bit-  
rates in the range  
5kbps to 384kbps  
A
AVCHD (Advanced Video Codec High  
Definition)  
Europe, Greenland, French  
territories, Middle East, Africa,  
Australia and New Zealand.  
Blu-ray  
B
This player can playback AVCHD format discs.  
These discs are normally recorded and used in  
camcorders.  
India, China, Russia, Central  
and South Asia.  
C
1
2
3
The AVCHD format is a high definition digital  
video camera format.  
The U.S., U.S. territories and  
Canada  
The MPEG-4 AVC/H.264 format is capable of  
compressing images at higher efficiency than  
that of the conventional image compressing  
format.  
Europe, Japan, the Middle East,  
Egypt, South Africa, Greenland  
Some AVCHD discs use the “x.v.Color” format.  
Taiwan, Korea, the Philippines,  
This player can playback AVCHD discs using  
“x.v.Color” format.  
Indonesia, Hong Kong  
“x.v.Color” is a trademark of Sony Corporation.  
Mexico, South America,  
Central America, Australia,  
New Zealand, Pacific Islands,  
Caribbean  
DVD-VIDEO  
“AVCHD” and the AVCHD logo are trademarks  
of Matsushita Electronic Industrial Co., Ltd. and  
Sony Corporation.  
4
NOTE  
Russia, Eastern Europe, India,  
most of Africa, North Korea,  
Mongolia  
Some AVCHD format discs may not play, depending  
on the recording condition.  
5
6
AVCHD format discs need to be finalized.  
“x.v.Color” offers a wider color range than normal  
China  
DVD camcorder discs.  
Some DivX, MKV and MP4 format discs may not  
play, depending on the video resolution and frame  
rate condition.  
Copyright  
© 2010 Samsung Electronics Co.,Ltd.  
All rights reserved; No part or whole of this user's  
manual may be reproduced or copied without the  
prior written permission of Samsung Electronics  
Co.,Ltd.  
English  
1ꢁ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Getting Started  
Logos of Discs that can be played  
Blu-ray Disc  
3D Blu-ray Disc  
DTS-HD Master Audio  
DivX  
Java  
NTSC broadcast system in  
BD-LIVE  
Dolby TrueHD  
U.S.A, Canada, Korea, Japan  
Accessories  
Check for the supplied accessories below.  
TV  
POWER  
POWER  
BONUSVIEW  
SOURCE  
SUBTITLE  
AUDIO  
DISC MENU  
TOOLS  
MENU  
TITLE MENU  
POPUP  
INFO  
HDMI cable  
Batteries for Remote Control (AAA Size)  
User Manual  
RETURN  
EXIT  
INTERNET@ FULL SCREEN REPEAT  
79  
MUTE  
VOL  
CH  
AK59-00104R  
Wireless LAN Adapter  
Remote Control  
1ꢂ  
English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Front Panel  
a
b c d e f g  
h
DISC TRAY  
Opens to accept a disc.  
1
2
3
4
5
6
7
DISPLAY  
Displays the playing status, time, etc.  
REMOTE CONTROL SENSOR Detects signals from the remote control.  
OPEN/CLOSE BUTTON  
STOP BUTTON  
Opens and closes the disc tray.  
Stops disc playback.  
PLAY/PAUSE BUTTON  
POWER BUTTON  
Plays a disc or pauses playback.  
Turns the player on and off.  
A USB memory flash stick can be connected here and used as storage when  
connected to BD-LIVE. It can also be used for software upgrades and MP3/JPEG/  
DivX/MKV/MP4 playback.  
USB HOST  
8
The Wireless LAN Adapter (WIS09ABGN) can be connected here to use the  
Wireless network.  
NOTE  
Software upgrades using the USB Host jack must be performed with a USB memory flash stick only.  
A USB device consuming more than 500mA requires a separate power supply device for normal operation.  
A USB HDD device cannot be used for BD Data storage (BD-LIVE).  
English  
1ꢃ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Getting Started  
Front Panel Display  
a
b
c
d
IN DISC INDICATOR  
Lights when a disc is inserted or played back.  
Displays the play time and the current status.  
1
CURRENT TIME AND  
2
STATUS INDICATOR  
3D DISC INDICATOR  
Lights when 3D disc is inserted or played back.  
Lights when the wireless network is connected.  
3
WIFI INDICATOR  
4
1ꢄ  
English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Rear Panel  
a b c  
d
e
g f  
DIGITAL AUDIO OUT  
Connects to a Receiver.  
1
2
(OPTICAL)  
LAN  
Can be used for network based services (See pages 53~58), BD-LIVE and software  
upgrades using a network connection.  
Using an HDMI cable, connect this HDMI output terminal to the HDMI input terminal  
on your TV for the best quality picture or to your Receiver for the best quality sound.  
HDMI OUT  
3
COMPONENT OUT  
Connects to equipment having component video input.  
4
Connect to a 7.1CH analog input on an A/V amplifier.  
(When connecting to a 5.1CH home theater or receiver, connect all the Analog  
Audio output jacks from this product except for the Surround Back Left/Surround  
Back Right outputs)  
7.1CH ANALOG AUDIO OUT  
5
VIDEO OUT  
AUDIO OUT  
Connects to the input of external equipment using a video cable.  
Connects to the audio input of external equipment using audio cables.  
6
7
English  
1ꢅ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Getting Started  
Remote Control  
Tour of the Remote Control  
TV  
POWER  
POWER  
Turn the player on and off.  
Turn the TV on and off.  
(To operate your TV, please refer to page 19)  
To open and close the disc tray.  
BONUSVIEW  
SOURCE  
After setup, allows you to set the input  
source on your TV.  
Press this to use Bonusview function.  
Press numeric buttons to operate options.  
SUBTITLE  
AUDIO  
Use this to access various audio functions  
on a disc (Blu-ray Disc/DVD).  
Press this to switch the Blu-ray Disc/DVD’s  
subtitle language.  
Press to skip backwards or forwards.  
Press to search a disc backwards or  
forwards.  
Press to stop a disc.  
Press to enter the disc menu.  
Press to pause a disc.  
Press to play a disc.  
DISC MENU  
TOOLS  
MENU  
TITLE MENU  
POPUP  
Use this to enter the popup menu/title  
menu.  
Press this to move to the home menu.  
Press this to use Tools menu.  
INFO  
Use this to display the playback information  
during playing a Blu-ray/DVD disc.  
Select menu items and change menu value.  
RETURN  
EXIT  
Return to the previous menu.  
Press this to exit the menu.  
These buttons are used both for menus  
on the player and also several Blu-ray Disc  
functions.  
Press this to link to various Internet@TV  
services.  
INTERNET@ FULL SCREEN REPEAT  
Press this to see the full screen on a TV.  
79  
Allows you to repeat a title, chapter, track  
or disc.  
MUTE  
VOL  
CH  
TV volume adjustment.  
AK59-00104R  
Use this to select a TV program.  
Mutes the speakers of your TV.  
Installing batteries  
NOTE  
If the remote does not operate properly :  
Check the polarity +/– of the batteries.  
Check if the batteries are drained.  
Check if the remote sensor is blocked by obstacles.  
Check if there is any fluorescent lighting nearby.  
1ꢆ  
English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting the Remote Control  
Controllable TV Codes  
You can control certain functions of your TV with  
this remote control.  
Brand  
SAMSUNG  
AIWA  
Code  
Brand  
NOBLEX  
NOKIA  
Code  
TV POWER+66  
TV POWER+74  
TV POWER+01, +02,  
+03, +04, +05,  
Button  
Function  
+06, +07, +08, +09  
TV POWER+72, +73,  
TV POWER  
Used to switch the television on and off.  
NORDMENDE  
PANASONIC  
PHILIPS  
+75  
TV POWER+82  
Used to select an external source  
TV POWER+53, +54,  
+74, +75  
TV SOURCE  
TV POWER+10, +11,  
connected to the TV.  
ANAM  
+12, +13, +14,  
+15, +16, +17, +18  
TV POWER+06, +55,  
TV VOL (+/–) Used to adjust the volume of the television.  
+56, +57  
BANG & OLUFSEN TV POWER+57  
TV CH (  
/
)
Used to select the desired channel.  
Used to toggle the sound on and off.  
, .  
TV POWER+06, +56,  
+57  
PHONOLA  
PIONEER  
BLAUPUNKT  
BRANDT  
BRIONVEGA  
CGE  
TV POWER+71  
TV POWER+73  
TV POWER+57  
TV POWER+52  
TV MUTE  
TV POWER+58, +59,  
+73, +74  
NOTE  
RADIOLA  
TV POWER+06, +56  
The functions listed above will not necessarily work  
on all televisions. If you encounter problems, operate  
the television directly or using the TV's remote.  
CONTINENTAL  
RADIOMARELLI TV POWER+57  
TV POWER+75  
EDISON  
RCA  
REX  
TV POWER+45, +46  
TV POWER+74  
TV POWER+19, +20,  
+23, +24, +25,  
+26, +27, +28,  
+29, +30, +31,  
+32, +33, +34  
DAEWOO  
To determine whether your television is  
TV POWER+57, +72,  
SABA  
SALORA  
SANYO  
+73, +74, +75  
compatible, follow the instructions below.  
EMERSON  
FERGUSON  
TV POWER+64  
TV POWER+73  
TV POWER+74  
1. Switch your television on.  
TV POWER+41, +42,  
2. Point the remote control towards the  
TV POWER+06, +49,  
FINLUX  
+43, +44, +48  
+57  
television.  
FORMENTI  
FUJITSU  
TV POWER+57  
TV POWER+84  
TV POWER+70  
SCHNEIDER  
SELECO  
TV POWER+06  
TV POWER+74  
3. Press and hold the TV POWER button and  
enter the two-figure code from the table on  
the right corresponding to the brand of your  
television by pressing the appropriate number  
buttons.  
GRADIENTE  
TV POWER+36, +37,  
SHARP  
+38, +39, +48  
TV POWER+49, +52,  
GRUNDIG  
+71  
SIEMENS  
SINGER  
SINUDYNE  
SONY  
TELEAVA  
TV POWER+71  
TV POWER+57  
TV POWER+57  
TV POWER+35, +48  
TV POWER+73  
TV POWER+60, +72,  
+73, +75  
If your television is compatible with the remote  
control, it will switch off.  
HITACHI  
IMPERIAL  
JVC  
TV POWER+52  
It is now programmed to operate with the  
TV POWER+61, +79  
remote control.  
TV POWER+06, +19,  
LG  
NOTE  
+20, +21, +22, +78  
TV POWER+67, +73,  
TELEFUNKEN  
+75, +76  
LOEWE  
TV POWER+06, +69  
If several codes are listed for your television brand,  
try each one in turn until you find one that works.  
TV POWER+72, +73,  
+75  
LOEWE OPTA TV POWER+06, +57  
THOMSON  
MAGNAVOX  
METZ  
TV POWER+40  
TV POWER+57  
If you replace the remote control's batteries, you  
THOMSON ASIA TV POWER+80, +81  
must set the brand code again.  
TV POWER+47, +48,  
TOSHIBA  
TV POWER+06, +48,  
MITSUBISHI  
+49, +50, +51, +52  
+62, +65  
MIVAR  
NEC  
NEWSAN  
TV POWER+52, +77  
TV POWER+83  
TV POWER+68  
WEGA  
YOKO  
ZENITH  
TV POWER+57  
TV POWER+06  
TV POWER+63  
English  
1ꢇ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connections  
Connecting to a Tv  
Case 1 : Connecting to a TV with an HDMI Cable - Best Quality  
(Recommended)  
1. Using an HDMI cable, connect the HDMI OUT terminal on the rear of the player to the HDMI IN  
terminal of your TV.  
2. Turn on the player and TV.  
3. Press the input selector on your TV remote control until the HDMI signal from the player appears on  
your TV screen.  
If you have set the player's remote control to operate your TV (See page 19), press the TV  
SOURCE button on the remote control and select HDMI as the external source of the TV.  
HDMI cable  
NOTE  
An HDMI cable outputs digital video/audio, so you don't need to connect an audio cable.  
If the player is connected to your TV in HDMI 720p,1080i or 1080p output mode, you must use a High speed (category 2)  
HDMI cable.  
HDMI outputs only a pure digital signal to the TV.  
If your TV does not support HDCP (High-bandwidth Digital Content Protection), random noise appears on the screen.  
Depending on your TV, certain HDMI output resolutions may not work. Please refer to the user manual of your TV.  
When you connect the player to the TV using the HDMI cable for the first time or to a new TV, the player sets the HDMI  
output resolution to the highest supported by the TV automatically.  
You must have an HDMI connection to enjoy videos with 3D technology.  
A long HDMI cable may cause a screen noise. If this is the case, set Deep Color to Off in the menu.  
ꢀ0  
English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Case 2 : Connecting to a TV with a DVI Cable - Best Quality  
(Recommended)  
1. Using an HDMI-DVI cable, connect the HDMI OUT terminal on the rear of the player to the DVI IN  
terminal of your TV.  
2. Using the audio cables, connect the AUDIO OUT (red and white) terminals on the rear of the player  
to the AUDIO IN (red and white) terminals of your TV.  
3. Turn on the player and TV.  
4. Press the input selector on your TV remote control until the DVI signal from the player appears on  
your TV screen.  
If you have set the player's remote control to operate your TV (See page 19), press the TV  
SOURCE button on the remote control and select HDMI as the external source of the TV.  
HDMI-DVI cable  
(not included)  
Audio cable  
(not included)  
Red  
White  
NOTE  
HDMI outputs only a pure digital signal to the TV. If your TV does not support HDCP (High-bandwidth Digital Content  
Protection), random noise appears on the screen.  
Depending on your TV, certain HDMI output resolutions may not work. Please refer to the user manual of your TV.  
When you connect the player to the TV using the HDMI-DVI cable for the first time or to a new TV, the player sets  
the HDMI output resolution to the highest supported by the TV automatically.  
English  
ꢀ1  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connections  
Case 3 : Connecting to a TV (Component) - Better Quality  
-
-
Connecting to your TV using Component video cables.  
You will enjoy high quality images with accurate color reproduction. Component video separates  
the picture element into black and white (Y), blue (PB) and red (PR) signals to present clear and clean  
images. (Audio signals are delivered through the audio output.)  
1. Using Component video cables, connect the COMPONENT VIDEO OUT terminals on the rear of  
2. Using the audio cables, connect the AUDIO OUT (red and white) terminals on the rear of the player  
the player to the COMPONENT IN terminals of your TV.  
to the AUDIO IN (red and white) terminals of your TV.  
3. Turn on the player and TV.  
4. Press the input selector on your TV remote control until the “COMPONENT” signal from the player  
appears on the TV screen.  
If you have set the player's remote control to operate your TV (See page 19), press the TV  
SOURCE button on the remote control and select COMPONENT as the external source of the TV.  
Audio cable  
Component cable  
(not included)  
(not included)  
Red  
White Red  
Blue Green  
NOTE  
Depending on the manufacturer, the component terminals on your TV may be marked “R-Y, B-Y, Y ” or “Cr, Cb, Y”  
instead of “PB, PR, Y”. The number and position of the terminals may vary depending on the TV set.  
Please refer to the user manual of your TV.  
You can select from a variety of resolution settings for Blu-ray Discs such as 1080i, 720p, 480p, 480i, depending on  
the disc type. (See pages 32~33.)  
The actual resolution may differ from the setting in the setup menu if both Component and HDMI cables are connected.  
The resolution may also be different depending on the disc. (See pages 32~33.)  
In DVD playback, if both HDMI and Component jacks are connected and you select the Component 1080p, 1080i or  
720p mode, the Display Setup menu will show the output resolution as 1080p, 1080i or 720p in the menu.  
The resolution is actually 480i.  
ꢀꢀ  
English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Case 4 : Connecting to a TV (Video) - Good Quality  
1. Using video/audio cables, connect the VIDEO OUT (yellow) / AUDIO OUT (red and white)  
terminals on the rear of the player to the VIDEO IN (yellow) / AUDIO IN (red and white) terminals of  
your TV.  
2. Turn on the player and TV.  
3. Press the input selector on your TV remote control until the “VIDEO” signal from the player appears  
on the TV screen.  
If you have set the player's remote control to operate your TV (See page 19), press the TV  
SOURCE button on the remote control and select VIDEO as the external source of the TV.  
Audio/Video cable  
(not included)  
Red  
White Yellow  
NOTE  
Noise may be generated if the audio cable is placed too close to the power cable.  
If you want to connect to an Amplifier, please refer to the Amplifier connection pages. (See pages 24~26)  
The number and position of the terminals may vary depending on your TV set. Please refer to the user manual of your TV.  
If there is only one audio input terminal on the TV, connect it to the AUDIO OUT (right/white) terminal of the player.  
CAUTION  
!
Do not connect the player to your TV through a VCR. Video signals fed through VCRs may be affected by copyright  
protection systems and the picture will be distorted on the television.  
English  
ꢀꢁ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connections  
Connecting to an Audio System  
Please turn the volume down when you turn on the Amplifier. A sudden loud sound may cause  
damage to the speakers and your ears.  
Set the audio output format according to the capabilities of your amplifier. (See pages 34~36)  
The position of HDMI terminals may vary depending on the Amplifier. Please refer to the user manual  
of your Amplifier.  
Case 1 : Connecting to an Audio System (HDMI Supported Amplifier)  
- Best Quality (Recommended)  
1. Using an HDMI cable, connect the HDMI OUT terminal on the rear of the player to the HDMI IN  
terminal of your amplifier.  
2. Using an HDMI cable, connect the HDMI OUT terminal of the amplifier to the HDMI IN terminal of  
your TV.  
3. Turn on the player, TV and amplifier.  
4. Press the input select button of the amplifier to select the external input and hear sound from the  
player. Refer to your Amplifier's user manual to set the Amplifier's audio input.  
HDMI cable  
HDMI cable  
ꢀꢂ  
English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Case 2 : Connecting to an Audio System (7.1 Channel Amplifier)  
- Better Quality  
1. Using the 7.1CH audio cables, connect the 7.1CH ANALOG AUDIO OUT terminals on the rear of  
the player to the 7.1CH ANALOG AUDIO IN terminals of your amplifier.  
2. Using the video signal cable(s), connect the HDMI, COMPONENT or VIDEO OUT terminals on the  
rear of the player to the HDMI, COMPONENT or VIDEO IN terminal of your TV. (See pages 20~23)  
3. Turn on the Player, TV and amplifier.  
4. Press the input select button of the amplifier to select the external input and hear sound from the  
player. Refer to your amplifier's user manual to set the amplifier's audio input.  
7.1CH audio cables  
(not included)  
7.1 Channel Amplifier  
NOTE  
The front left and right outputs on your player and 7.1 channel amplifier must be connected to hear disc menu audio  
from certain Blu-ray discs.  
When you connect the 7.1CH ANALOG AUDIO OUT terminals using 7.1CH audio cables, we recommend you set the  
Digital Output to PCM. (See page 34)  
When you connect to a 5.1 channel home theater or receiver, connect all the Analog Audio output jacks from the player  
except for the Surround Back Left/Surround Back Right outputs.  
English  
ꢀꢃ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connections  
Case 3 : Connecting to an Audio  
System (Dolby Digital, DTS  
Amplifier) - Better Quality  
Case 4 : Connecting to an Audio  
System (2 Channel Amplifier)  
- Good Quality  
1. Using an optical cable, connect the DIGITAL  
AUDIO OUT (OPTICAL) terminal on the  
rear of the player to the DIGITAL AUDIO IN  
(OPTICAL) terminal of your amplifier.  
1. Using audio cables, connect the AUDIO  
OUT (red and white) terminals on the rear of  
the player to the AUDIO IN (red and white)  
terminals of your amplifier.  
2. Using the video signal cable(s), connect  
the HDMI, COMPONENT or VIDEO OUT  
terminals on the rear of the player to the  
HDMI, COMPONENT or VIDEO IN terminal  
of your TV. (See pages 20~23.)  
2. Using the video signal cable(s), connect  
the HDMI, COMPONENT or VIDEO OUT  
terminals on the rear of the player to the  
HDMI, COMPONENT or VIDEO IN terminal  
of your TV. (See pages 20~23.)  
3. Turn on the player, TV and amplifier.  
3. Turn on the player, TV and amplifier.  
4. Press the input select button of the amplifier  
to select the external input and hear sound  
from the player. Refer to your amplifier's user  
manual to set the amplifier's audio input.  
4. Press the input select button of the amplifier  
to select the external input and hear sound  
from the player. Refer to your amplifier's user  
manual to set the amplifier's audio input.  
Case 3 : Optical cable  
(not included)  
Case 4 : Audio cable  
(not included)  
Red  
White  
NOTE  
If you use the Digital Audio connection described in Case 3, you will hear discs with PCM audio soundtracks only  
through the front two speakers.  
ꢀꢄ  
English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connecting to the Network  
This player lets you view network based services (See pages 53~58) such as Internet@TV and BD-LIVE,  
as well as receive software upgrades through a network connection. We recommend using an AP (Access  
Point) or IP router for the connection. For more information on router connection, refer to the user manual  
oCf athbelreouNtereotrwcoonrtakct the router manufacturer for technical assistance.  
1. Using the Direct LAN Cable (UTP cable), connect the LAN terminal of the player to the LAN terminal  
of your modem.  
2. Set the network options. (See pages 38~42)  
Router  
Broadband modem  
Or  
(with integrated router)  
Broadband modem  
Broadband  
Broadband  
service  
service  
Networking with PC for  
AllShare function  
(See pages 57~58)  
NOTE  
Internet access to Samsung’s software update server may not be allowed, depending on the router you use or the ISP’s  
policy. For more information, contact your ISP (Internet Service Provider).  
For DSL users, please use a router to make a network connection.  
To use the AllShare function, you must connect your PC to your network as shown in the figure.  
The connection can be wired or wireless.  
English  
ꢀꢅ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connections  
Wireless Network  
You can connect to network with a Wireless IP sharer.  
1. A wireless AP/IP router is required to make a wireless network connection.  
Connect the wireless LAN adapter to the Wireless LAN Adapter on the front panel of the product.  
2. Set the network options. (See pages 38~42)  
Broadband  
service  
Wireless IP Sharer  
Networking with PC for  
AllShare function  
Wireless LAN Adapter  
(See pages 57~58)  
NOTE  
Use only the Samsung wireless LAN adapter with this product. (Model name: WIS09ABGN).  
Do not use this adapter with any other third-party products.  
Please contact the retailer of this product for purchasing the wireless LAN adapter.  
You must use a wireless IP sharer that supports IEEE 802.11 a/b/g/n. (n is recommended for stable operation of the  
wireless network.)  
Wireless LAN, by its nature, may cause interference, depending on the operating conditions.  
(AP performance, distance, obstacles, interference by other radio devices, etc).  
Set the wireless IP sharer to Infrastructure mode. Ad-hoc mode is not supported.  
When applying the security key for the AP (wireless IP sharer), only the following security protocols are supported:  
1) Authentication Mode : WEP, WPAPSK, WPA2PSK  
2) Encryption Type : WEP, AES  
To use the AllShare function, you must connect your PC to your network as shown in the figure.  
The connection can be wired or wireless.  
ꢀꢆ  
English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setup  
5. Press the ◄► buttons to select the desired  
Network Settings : Wired, Wireless or PBC  
(WPS), and then press the ENTER button.  
If you do not know your Network Settings,  
press the BLUE (D) button on your remote  
instead to skip Network Settings here, finish  
the Initial Settings, and go to the Home menu.  
If you selected a Network Setting, go to  
Before Starting (Initial Settings)  
1. Turn on your TV after connecting the player.  
(When the player is connected to TV for the  
first time, the player will turn on automatically  
and display the Initial Settings screen.)  
Initial Settings I On-Screen Language  
Select a language for the on-screen displays.  
pages 38~42 for more information about the  
Network settings. When done, go to Step 6.  
English  
6. Press the OK button.  
Français  
Deutsch  
Español  
Italiano  
The Home menu is displayed. For more  
information about the Home menu, please  
see page 30.  
Nederlands  
Svenska  
Home Menu  
> Move " Select  
Please activate Intern  
e
t
@
T
V service  
2. Press the ▲▼ buttons to select the desired  
to enjoy a variety of Internet Services.  
language, then press the ENTER button.  
3. Press the ENTER button to select Start.  
Initial Settings  
TV Aspect and Network will be set.  
Each setting may be changed later under "Settings"  
No Disc  
a Change Device  
d View Devices  
Enter  
"
NOTE  
Start  
When the player is connected to a TV for the first  
time, player will turn on automatically.  
This is not malfunction.  
a
Previous " Select  
The Home menu will not appear if you do not  
configure the initial settings except as noted below.  
4. Press the ▲▼ buttons to select the desired  
TV aspect ratio, then press the ENTER  
button. (See page 32)  
If you press the BLUE (D) button during the network  
setup, you can access the Home menu even if the  
network setup is not completed yet.  
Initial Settings I Network  
When you return to the Home menu, the full screen  
mode is cancelled automatically.  
Network Setting is needed to use various Internet services.  
Choose the primary method for connecting to network.  
If you want to display the Initial Setting screen again  
to make changes, press the STOP (  
) button on  
Wired : Set the network connection using Ethernet cable. Please make sure that  
Ethernet cable is connected.  
the front panel of the player for more than 5 seconds  
with no disc inserted.  
Wireless  
Previous  
PBC (WPS)  
Wired  
a
d
Skip < Move " Select  
English  
ꢀꢇ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setup  
Use the HDMI cable to connect the player to an  
1. Press the POWER button.  
Anynet+(HDMI-CEC)-compliant Samsung TV.  
If the TV uses a language supported by the player,  
that language will be set to a preferred language  
automatically.  
The Home Menu will appear.  
Home Menu  
For this to work, the Anynet+(HDMI-CEC) feature  
should be set to On in both the TV and the player.  
Please activate Intern  
e
t
@
T
V service  
to enjoy a variety of Internet Services.  
2
3
4
If the player is left in the stop mode more than  
5 minutes without being used, a screen saver  
appears on your TV. If the player is left in the screen  
saver mode for more than 25 minutes, the power  
automatically turns off.  
1
5
6
No Disc  
a Change Device  
d View Devices  
Enter  
"
Setting the Menu  
Selects Internet@TV.  
Selects Videos.  
Selects Music.  
Selects Photos.  
Selects Settings.  
1
DISC MENU  
MENU  
TITLE MENU  
POPUP  
1
2
2
3
4
5
6
TOOLS  
INFO  
3
4
RETURN  
EXIT  
Displays the buttons available.  
MENU Button : Press this to move to the Home menu.  
1
2. Press the ◄► buttons to select Settings,  
RETURN Button : Return to the previous menu.  
2
3
4
then press the ENTER button.  
3. Press the ▲▼ buttons to select the desired  
ENTER / DIRECTION Button :  
Move the cursor or select an item.  
Select the currently selected item.  
Confirm the setting.  
submenu, then press the ENTER button.  
4. Press the ▲▼ buttons to select the desired  
item, then press the ENTER button.  
5. Press the EXIT button to exit the menu.  
EXIT Button : Press this to exit the menu.  
NOTE  
When the player is connected to the network, select  
Internet@TV from the Home menu.  
Download desired content from Samsung Apps.  
(See page 56)  
The access steps may differ depending on the  
selected menu.  
The OSD (On Screen Display) may change in this  
player after you upgrade the software version.  
ꢁ0  
English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Display  
TV Screen Size  
Lets you enter the actual screen size of your TV so that  
the player can adjust the image according to the screen  
size and display an optimal 3D image.  
You can configure various display options such as  
t3hDe TV Aspect, Resolution, etc.  
(The maximum allowed screen size is 116 inches for  
this player.)  
Select whether to play a Blu-ray Disc with 3D  
contents in 3D Mode.  
CAUTION  
!
If you want to enjoy a 3D content, connect a 3D  
device (3D compliant AV receiver or TV) to the  
product and wear a 3D glass before playing the 3D  
content.  
Settings  
Display  
3D  
3D  
Audio  
While watching the 3D video, all analog component  
and composite signals will be blocked automatically.  
System  
Network  
Language  
Security  
General  
Support  
\
3D Mode  
: Auto  
55  
TV Screen Size  
:
inch  
All 3D signals are output only using the HDMI cable  
and through the HDMI OUT port.  
> Move " Enter ' Return  
Still Mode  
: Auto  
As the video resolution in 3D play mode is fixed  
according to the resolution of the original 3D  
video, you can not change the resolution to your  
preference.  
Some functions such as BD Wise, or setting the  
screen size or resolution may not operate properly in  
3D play mode.  
3D Mode  
Auto : You can choose whether to watch 3D  
Blu-ray disc in 3D or 2D mode before playing  
the 3D Blu-ray. It is automatically played in 2D  
mode if your TV cannot support 3D contents.  
You must use a high-speed HDMI cable for a proper  
output of the 3D signal.  
Stay at least three times of the length of the screen  
distant from the TV.  
3D : The 3D Blu-ray Disc is played in 3D mode  
at all times. If a TV cannot support 3D Blu-ray  
discs, the playing screen can be black.  
- It is recommended to place the 3D video screen  
forward at eye level.  
2D : The 3D Blu-ray Disc is played in 2D mode  
at all times. Choose this to view a picture  
without 3D effect or when a TV cannot support  
3D Blu-ray discs.  
If the product is connected to some 3D devices, the  
3D effect may not function properly.  
You can not use this product for switching a 2D  
content to 3D.  
NOTE  
“Blu-ray 3D” and “Blu-ray 3D” logo are trademarks  
of Blu-ray Disc Association.  
If you press the STOP(  
) button once during  
the 3D disc playback, 3D mode option will not be  
deactivated.  
To activate 3D mode option during the 3D disc  
playback, press the STOP(  
) button twice.  
Depending on the content and its play position,  
vertical black bars could be seen on left or right or  
both sides.  
English  
ꢁ1  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setup  
TV Aspect  
BD Wise (Samsung Players only)  
Depending on the type of television you have, you  
BD Wise is Samsung's latest inter-connectivity  
feature.  
may want to adjust the screen setting.  
When you connect Samsung players with BD  
Wise to a Samsung TV via HDMI, the optimum  
resolution is set automatically.  
16:9 Normal  
Certain movies (4:3 source) are  
displayed in 4:3 Pillar-box (black  
bars on sides of picture) if 16:9  
normal is selected.  
On : The original resolution of the BD/DVD disc  
is output to the TV.  
Off : The output resolution is fixed at the  
resolution previously set, regardless of the  
resolution of the disc.  
16:9 Wide  
NOTE  
If you want to change the resolution in BD Wise, you  
You can view the full 16:9 picture  
on your widescreen TV.  
must set BD Wise to Off in advance.  
If you set BD Wise off, the resolution of the  
connected TV is adjusted to its maximum resolution  
automatically.  
4:3 Letter Box  
If the player is connected to a device that does not  
support BD Wise, you can not use the BD Wise  
function.  
Select when you want to see full  
16:9 ratio image supplied by a  
Blu-ray Disc/DVD, even though  
you have a TV with a 4:3 ratio  
screen. Black bars will appear at  
the top and bottom of the screen.  
For proper operation of BD Wise, set the BD Wise  
menu of both the product and the TV to On.  
Resolution  
4:3 Pan-Scan  
Sets the output resolution of the Component and  
HDMI video signal.  
Select when you want to see the  
16:9 video supplied by the Blu-ray  
Disc/DVD without the black bars on  
top and bottom, even though you  
have a TV with a 4:3 ratio screen.  
The extreme left and right portion  
The number in 1080p, 1080i, 720p, 480p, 480i  
indicates the number of lines of video.  
The i and p indicate interlace and progressive  
scan, respectively.  
of the movie picture will be cut off.  
Auto : Automatically checks and sets the  
optimal resolution.  
NOTE  
BD Wise : Automatically sets the optimal  
resolution when connected via HDMI to a TV  
with the BD Wise feature. (The BD Wise menu  
item appears only if BD Wise is set to On.)  
Depending on the disc type, some aspect ratios may  
not be available.  
If you select an aspect ratio and option which is  
different than the aspect ratio of your TV screen,  
then the picture might appear distorted.  
1080p : Outputs 1080 lines of progressive  
video.  
If you select the 4:3 Pan-Scan or 4:3 Letter Box, the  
1080i : Outputs 1080 lines of interlaced video.  
720p : Outputs 720 lines of progressive video.  
480p : Outputs 480 lines of progressive video.  
480i : Outputs 480 lines of interlaced video.  
FULL SCREEN button on your remote will not work.  
If you select the 16:9 Normal, your TV may display  
4:3 Pillar-box.  
In this case, the FULL SCREEN button on the remote  
control will not work.  
ꢁꢀ  
English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Resolution according to the output mode  
Blu-ray Disc playback  
HDMI connected  
HDMI not connected  
Output  
Setup  
HDMI Mode  
Component/VIDEO Mode  
Component Mode  
VIDEO Mode  
Auto  
Optimal Resolution  
1080p@60F  
480i  
480i  
-
-
-
-
1080p, Movie Frame(24Fs) off  
1080p/1080i,  
1080p@24F  
480i  
-
-
Movie Frame(24Fs) on  
1080i, Movie Frame(24Fs) off  
1080i  
720p  
480p  
-
480i  
480i  
480i  
-
1080i  
720p  
480p  
480i  
480i  
480i  
480i  
480i  
720p  
480p  
480i  
DVD playback  
HDMI connected  
HDMI not connected  
Output  
Setup  
HDMI Mode  
Optimal Resolution  
1080p@60F  
1080i  
Component/VIDEO Mode  
Component Mode  
VIDEO Mode  
Auto  
1080p  
1080i  
720p  
480p  
480i  
480i  
480i  
480i  
480i  
480i  
-
-
-
-
-
480p  
480p  
480p  
480i  
480i  
480i  
480i  
480i  
720p  
480p  
-
NOTE  
If the screen is blank, press and hold the STOP (  
)
button on the front of the player for more than 5  
If the connected TV does not support Movie Frame or  
the selected resolution, the message “If no pictures  
are shown after the selection, please wait for 15  
seconds. And then, the resolution will be reverted to  
the previous value automatically. Would you like to  
make a selection?” will be displayed.  
seconds (no disc inserted). All settings are restored to  
the factory default. Follow the steps on the previous  
page to access each mode and select the Display  
Setup that your TV will support.  
When the factory default settings are restored, all  
If you select Yes and the resolution is not supported,  
the TV's screen will be blank. Please wait for 15  
seconds and the resolution will revert to the previous  
value automatically.  
the user data stored in the BD data is deleted.  
The Blu-ray Disc must have the 24 frame feature to  
use the Movie Frame (24Fs) mode.  
If both HDMI and Component jacks are connected  
and you are currently viewing Component output,  
there may be a difference between the resolution  
listed above and the actual resolution depending on  
your TV.  
English  
ꢁꢁ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setup  
HDMI Format  
HDMI Deep Color  
You can optimize the color setting from the HDMI  
Set to output the picture from the HDMI OUT jack  
with Deep Color or without. Deep Color allows  
more accurate color reproduction with deeper  
color depth.  
output by selecting a connected device Type.  
TV : Select if connected to a TV via HDMI.  
HDMI.  
Monitor : Select if connected to a Monitor via  
Auto : The picture is output with Deep Color  
to the connected TV if it supports HDMI Deep  
Color.  
Movie Frame (24Fs)  
Off : The picture is output without Deep Color.  
Setting the Movie Frame (24Fs) feature to On  
allows you to adjust the player's HDMI output to  
24 frames per second for improved picture quality.  
You can enjoy the Movie Frame (24Fs) feature only  
on a TV supporting this frame rate. This menu can  
only be selected in 1080i or 1080p HDMI output  
resolution modes.  
Audio  
Digital Output  
Lets you set the audio output format according to  
the capabilities of your amplifier. (For more details,  
see the digital output selection on the next page.)  
On : Movie Frame (24Fs) functions is on.  
Off : Movie Frame (24Fs) functions is off.  
PCM  
NOTE  
Bitstream(Re-encode)  
If your TV does not support Movie Frame (24Fs)  
function, a pop-up message is will be displayed.  
Bitstream(Audiophile)  
NOTE  
Be sure to select the correct Digital Output or you  
will hear no sound or a loud noise.  
Progressive Mode  
Set to improve picture quality when viewing DVDs.  
If the HDMI device (Receiver, TV) is not compatible  
with a compressed format (Dolby digital, DTS), the  
audio signal outputs as PCM.  
Auto : Select to have the player automatically  
set the best picture for the DVD you're  
watching.  
Regular DVDs do not have Secondary and Effect  
Video : Select for the best picture quality from  
audio.  
concert or TV show DVDs.  
Some Blu-ray Discs do not have Secondary and  
Effect audio.  
Still Mode  
This Digital Output setup does not affect the analog  
(L/R) audio or HDMI audio output to your TV.  
It affect the optical and HDMI audio output when the  
player is connected to a receiver.  
Set the type of picture the player shows when you  
pause DVD playback.  
Auto : Automatically show the best still picture  
If you play MPEG audio soundtracks, the audio  
signal outputs as PCM regardless of Digital Output  
Selections (PCM or Bitstream).  
depending on the content.  
Frame : Select when pausing a scene with a  
little action.  
Field : Select when pausing a scene with a lot  
of action.  
ꢁꢂ  
English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Digital Output Selection  
Bitstream  
Bitstream  
Setup  
PCM  
(Re-encode)  
(Audiophile)  
Connection  
HDMI Receiver Optical  
HDMI Receiver or Optical HDMI Receiver  
Optical  
PCM  
Up to 7.1ch  
Up to 5.1ch  
PCM 2ch  
PCM 2ch  
DTS re-encoded  
DTS re-encoded  
PCM  
PCM 2ch  
Dolby Digital  
Dolby Digital  
Dolby Digital  
Dolby Digital  
Dolby Digital  
Up to 7.1ch  
PCM 2ch  
DTS re-encoded  
Dolby Digital  
Audio Stream  
on Blu-ray  
Disc  
Plus  
Plus  
Dolby TrueHD Up to 7.1ch  
PCM 2ch  
PCM 2ch  
PCM 2ch  
PCM 2ch  
PCM 2ch  
PCM 2ch  
PCM 2ch  
DTS re-encoded  
DTS re-encoded  
DTS re-encoded  
DTS re-encoded  
PCM 2ch  
Dolby Digital  
DTS  
Dolby TrueHD Dolby Digital  
DTS  
Up to 6.1ch  
DTS  
DTS  
DTS  
DTS  
DTS-HD HRA Up to 7.1ch  
DTS-HD HRA  
DTS-HD MA  
PCM 2ch  
Dolby Digital  
DTS  
DTS-HD MA  
PCM  
Dolby Digital  
DTS  
Up to 7.1ch  
PCM 2ch  
Up to 5.1ch  
Up to 6.1ch  
PCM 2ch  
Dolby Digital  
DTS  
Audio Stream  
on DVD  
Outputs only the Primary audio  
soundtrack (main soundtrack of  
the movie) so that your receiver  
can decode the audio bitstream.  
You will not hear Secondary and  
Effect audio.  
Decodes Primary, Secondary  
and Effect audio streams  
Decodes Primary, Secondary  
Definition for  
Blu-ray Disc  
Any  
and Effect audio streams together into PCM audio, then  
together into PCM audio. re-encodes the PCM audio into  
DTS bitstream.  
Blu-ray Discs may include three audio streams.  
PCM Downsampling  
-
-
-
Primary Audio : The audio soundtrack of the  
main feature  
Select whether to downsample 96KHz signals.  
On : Select when the Amplifier connected to the  
player is not 96KHz compatible. 96KHz signals  
are down converted to 48KHz.  
Secondary Audio : Additional soundtrack such  
as director or actor's commentary.  
Interactive Audio : Plays Interactive sounds  
when selected. Interactive Audio is different on  
each Blu-ray Disc.  
Off : Select this when the Amplifier connected  
to the player is 96KHz compatible.  
NOTE  
Even when PCM Downsampling is set to Off, some  
discs will only output downsampled audio through  
the optical digital outputs.  
English  
ꢁꢃ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setup  
Cinema : Outputs 2-channel movie sound over  
HDMI  
multi-channels.  
If your TV is not compatible with compressed  
multi-channel formats (Dolby Digital, DTS), the  
player may output PCM 2ch downmixed audio  
even though you set Bitstream (either Re-  
encode or Audiophile) on your setup menu.  
Music : Outputs 2-channel music over multi-  
channels.  
NOTE  
If you are using an HDMI receiver, this option is  
available when you set Digital Output setup to PCM.  
If your TV is not compatible with PCM sampling  
rates over 48kHz, the player may output 48kHz  
downsampled PCM audio even though you set  
PCM Downsampling to Off.  
You can use this option with analog 7.1ch output  
when you don't use HDMI receiver.  
Speaker Setting  
Dynamic Range Control  
Set the speaker sound to obtain the best possible  
surround sound.  
You can listen at low volumes but still hear dialog  
clearly.  
This menu is available only when you are using  
7.1ch analog output.  
This is only active when a Dolby Digital signal is  
detected.  
Auto : The Dynamic Range Control will be set  
automatically based on the information provided  
by the Dolby TrueHD Soundtrack.  
Settings  
Display  
On-Screen Menu  
Speaker Setting  
:
Audio  
Front  
Large  
Off : Turn Dynamic Range Control off.  
System  
Networ
Langua
Securit
General  
Support  
Center  
:
:
:
:
:
Large  
Large  
Large  
On  
Surround  
On : Choose to listen to a movie at a lower  
Surround Back  
Subwoofer  
Test Tone  
volume without losing clarity of dialog.  
Off  
<
Change  
"
Select  
'
Return  
Downmixing Mode  
Select whether to downmix the multi-channel  
audio into fewer channels.  
Test Tone  
Normal Stereo : Downmixes the multi-channel  
audio into two channel stereo. Choose when  
connected to equipment that does not support  
virtual surround functions such as Dolby Pro  
Logic.  
;
;
;
;
A test tone is sent to L  
C
R
RS RSB  
;
;
;
LSB LS LFE in order, so you can make  
sure the speakers are set up correctly.  
You can activate the test tone only when no  
discs are in the unit.  
Surround Compatible : Downmixes multi-  
channel audio into surround compatible stereo.  
Choose when connected to equipment that  
supports virtual surround functions such as  
Dolby Pro Logic.  
The test tone outputs through the 7.1 channel  
analog outputs only.  
DTS Neo:6  
You can enjoy multi-channel sound from a simple  
2-channel audio source.  
Off : Outputs a 2-channel audio signal through  
the front speakers only.  
ꢁꢄ  
English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
System  
BD Data Management  
Lets you manage the downloaded contents from  
a Blu-ray Disc that supports the BD-LIVE service.  
Initial Settings  
You can check the device information including  
the storage size, delete the BD data or change the  
Flash memory device.  
By adjusting the Initial Settings, you can set the  
language, TV aspect and Network Settings, etc.  
For more information on the settings, refer to the  
corresponding section in this user manual.  
(See pages 29~44)  
Change Device allows you to select either the  
player's Internal Memory or External Memory  
(a connected USB Device).  
If the data to be stored from BD-LIVE is greater  
than the size of the remaining memory or the  
Internal Memory is full, connect an External USB  
device, then select External Device in the menu.  
Internet@TV Screen Size  
Set the Internet@TV Screen to the optimal size.  
Size 1: Display smaller application icons.  
You may see some black on the sides of the screen.  
Settings  
Size 2: Display normal application icons.  
Display  
On-Screen Menu  
:
The image may be too large for your TV screen.  
BD Data Management  
Audio  
Current Device  
: Internal Memory  
Size 3: Display larger application icons.  
System  
Network  
Language  
Security  
General  
Support  
Total Size  
: 589MB  
: 588MB  
The image may be too large for your TV screen.  
Available Size  
Delete BD Data  
Change Device  
: Internal Memory  
Anynet+(HDMI-CEC)  
>
Move  
"
Select  
'
Return  
Anynet+ is a convenient function that offers linked  
operations with other Samsung products that  
have the Anynet+ feature.  
To operate this function, connect this player to a  
Samsung TV with an HDMI cable.  
Description of Device (Storage) Information on  
the Player  
You can operate this player using a Samsung TV  
remote control and start disc playback simply  
Total Size : Total size of the Device (Storage).  
(Storage).  
NOTE  
Available Size : Available size of the Device  
by pressing the PLAY (  
) button on the TV’s  
remote control.  
For more information, please see the TV user  
manual.  
In the external memory mode, disc playback is  
stopped if you disconnect the USB device in the  
middle of the playback.  
On : Anynet+ function is on.  
Off : Anynet+ function is off.  
Only those USB devices formatted in the FAT file  
system (DOS 8.3 volume label) are supported, We  
recommend you use USB devices that support the  
USB 2.0 protocol with 4 MB/sec or faster read/write  
speed.  
NOTE  
This function is not available if the HDMI cable does  
not support CEC.  
If your Samsung TV has an n logo, then it  
supports the Anynet+ function.  
A USB HDD device cannot be used for BD Data  
Depending on your TV, certain HDMI output  
storage (BD-LIVE).  
resolutions may not work.  
The Resume Play function may not work after you  
format the storage device.  
Please refer to the user manual of your TV.  
The total size of BD Data Management may differ,  
depending on the conditions.  
English  
ꢁꢅ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setup  
Clock  
DivX(R) Deactivation  
Set time-related functions.  
Select this to get a new registration code.  
Settings  
Settings  
Display  
On-Screen Menu  
Clock  
:
Display  
Initial Setting  
Disc Menu  
Audio  
: Auto  
Audio  
:
Clock Mode  
Clock Set  
Time Zone  
DST  
\
System  
Network  
Language  
Security  
General  
Support  
System  
Network  
Language  
Security  
General  
Support  
: GMT + 0:00  
: Off  
Do you want to deactivate your device?  
Yes  
No  
>
Move  
"
Enter  
'
Return  
Clock Mode : You can set it to Auto or  
Manual.  
NOTE  
You can operate this function when the DivX(R)  
Registration function is deactivated.  
If you select Manual, the Clock Set menu is  
activated while and DST is will be deactivated.  
Clock Set : You can specify the current time  
and date manually.  
Network Setup  
Time Zone : You can specify the time zone that  
To begin setting up the network connection for  
is applicable to your area.  
your player, follow these steps:  
DST : You can set DST (Daylight Saving Time)  
on or off.  
1. In the Home menu, press the ◄► buttons to  
select Settings, and then press the ENTER  
button.  
DivX(R) Registration  
2. Press the ▲▼ buttons to select Network, and  
View the DivX(R) VOD Registration Code to  
purchase and play DivX(R) VOD content.  
then press the ENTER button.  
3. Press the ▲▼ buttons to select Network  
Settings, and then press the ENTER button.  
Settings  
4. Press the ▲▼ buttons to select Network  
Display  
Initial Setting  
Disc Menu  
Type, and then press the ENTER button.  
Audio  
:
System  
Network  
Language  
Security  
General  
Support  
5. Press the ▲▼ buttons to select Wired or  
DivX(R) Video On Demand  
Your registration code is : XXXXXXXXXX  
Wireless, and then press the ENTER button.  
6. Go to the next section.  
OK  
Network Settings  
Please contact your ISP to find out if your IP  
address is static or dynamic. If it is dynamic, we  
recommend using the Auto setting. This is the  
easiest and will work in the majority of cases. If it is  
static, you must use the manual set up procedure.  
NOTE  
This option is not activated if you select OK.  
To activate this option, please activate the DivX(R)  
Deactivation.  
Directions for wired networks are below. Directions  
for wireless networks are after the directions for  
wired networks.  
ꢁꢆ  
English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting Up a Wired Connection - Manual  
Wired Network  
If the Auto Setting does not work, you’ll need to  
set the Network Setting values manually.  
1. In the Network Settings menu, press the ▲▼  
buttons to select Network Settings, and then  
press the ENTER button.  
To get the Network setting values from most  
Windows computers, follow these steps:  
The Internet Protocol Setup screen appears.  
1. Right click the Network icon on the bottom  
2. Press the ► button, then select Auto or  
right of the screen.  
Manual, and then press the ENTER button.  
2. In the pop-up menu, click Status.  
Setting Up a Wired Connection - Auto  
3. On the dialog that appears, click the Support  
tab.  
1. If you selected Auto, the Network Function  
acquires and fills in the values for IP Address,  
Subnet Mask, etc., automatically.  
4. On the Support tab, click the Details button.  
The Network settings are displayed.  
NOTE  
To enter the Network settings into your player,  
This process can take up to five minutes.  
follow these steps:  
1. On the Internet Protocol Setup screen, press  
the ENTER button.  
Network Setting  
Internet Protocol Setup  
IP Address  
: Auto  
\
2. Press the ▲▼ buttons to select Manual, and  
0
0
0
:
:
:
0
0
0
0
0
0
0
0
0
then press the ENTER button.  
Subnet Mask  
Gateway  
3. Press the ▼ button to go to the first entry field  
DNS  
: Auto  
(IP Address).  
DNS Server  
:
0
0
0
0
>
Move  
"
Enter  
'
Return  
Network Setting  
Internet Protocol Setup  
IP Address  
: Manual  
\
:
:
:
0
0
0
0
0
0
Subnet Mask  
Gateway  
255 255 255  
0
0
0
0
2. After the Network Function has acquired the  
network values, press the RETURN button.  
Then, run a Network Test to ensure the player  
has connected to your network (See page 42).  
DNS  
: Manual  
DNS Server  
:
0
0
0
>
Move  
"
Enter  
'
Return  
3. If the Network Function does not acquire the  
network values or you selected Manual, go to  
the directions for Manual Setup.  
4. Use the number buttons on your remote to  
enter numbers.  
5. When done with each field, use the ► button  
to move successively to the next field.  
You can also use the other arrow buttons to  
move up, down, and back.  
6. Enter the IP Address, Subnet Mask, and  
Gateway values.  
7. Press the ▼ button to go to DNS.  
8. Press the ▼ button to go to the first DNS  
entry field. Enter the numbers as above.  
English  
ꢁꢇ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setup  
9. Press the RETURN button on your remote.  
Setting Up the Wireless Network Connection  
- Auto Network Search  
10. Run a Network Test to ensure the player has  
connected to your network (See page 42).  
Most wireless networks have an optional security  
system that requires devices that access the  
network to transmit an encrypted security code  
called an Access or Security Key. The Security  
Key is based on a Pass Phrase, typically a word  
or a series of letters and numbers of a specified  
length you were asked to enter when you set up  
security for your wireless network. If you use this  
method of setting up the network connection, and  
have a Security Key for your wireless network,  
you will have to enter the Pass Phrase during the  
setup process.  
Wireless Network  
You can setup the wireless connection three ways:  
Using PBC (WPS)  
Using the Auto Network Search function.  
Manually.  
Each method is described below.  
Setting Up the Wireless Network Connection  
- PBC (WPS)  
Setting Up the Network Connection  
.
The easiest way to set up the wireless network  
connection is using the PBC (WPS) function.  
If your wireless router has a PBC (WPS) button,  
follow these steps:  
To set up the wireless connection using Auto  
Network Search, follow these steps:  
1. In the Network Settings menu, press the ▲▼  
buttons to select Network Settings, and then  
press the ENTER button.  
1. In the Network Settings menu, press the ▲▼  
buttons to select Network Settings, and then  
press the ENTER button.  
The Internet Protocol Setup screen appears.  
The Internet Protocol Setup screen appears.  
2. Press the ▲▼ buttons to select the Internet  
Protocol Setup, and then press the ENTER  
button.  
2. Press the RED (A) button on the remote  
control.  
3. Press the PBC (WPS) button on your router  
within two minutes. Your player displays the  
Network Selection Screen, and automatically  
acquires all the network setting values it  
needs and connects to your network. When  
it is done, it displays an OK button. Press the  
ENTER button on your remote.  
3. Press the ▲▼ buttons to select Auto or  
Manual, and then press the ENTER button.  
4. If you selected Auto, press the ▲ button to  
go to Access Point Selection, and then  
press the ENTER button.  
The Network function searches for available  
wireless networks.  
4. After the network connection is set up, press  
the RETURN button to exit the Network  
Setting screen.  
When done, it displays a list of the available  
networks.  
Network Setting  
Select a network  
Internet Protocol Setup  
IP Address  
: Not Selected  
: Auto  
\
0
0
0
:
:
:
0
0
0
0
0
0
0
0
0
Subnet Mask  
Gateway  
DNS  
: Auto  
0
0
0
0
DNS Server  
:
@
PBC(WPS)  
>
Move  
"
Enter  
'
Return  
ꢂ0  
English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5. In the list of networks, press the ▲▼ buttons  
to select a network, and then press the  
ENTER button.  
11. Wait until the connection confirmation  
message is displayed, and then press the  
ENTER button. The Network Settings screen  
reappears.  
6. If the PIN/Security pop-up appears, go to  
Step 7. If the Network Connecting Screen  
appears, go to Step 11.  
12. To test the connection, press the ▼ button  
to select Network Test, and then press the  
ENTER button.  
7. Press the ▲▼ buttons to select PIN or  
Security.  
Setting Up the Wireless Network Connection  
For most home networks, you would select  
Security (for Security Key).  
- Manual  
If the Auto Setting does not work, you need to  
enter the Network settng values manually.  
8. On the Security screen, enter your network’s  
Pass Phrase.  
To get the Network setting values from most  
NOTE  
Windows computers, follow these steps:  
You should be able to find the Pass Phrase on one of  
the set up screens you used to set up your router or  
modem.  
1. Right click the Network icon on the bottom  
right of the screen.  
2. In the pop-up menu, click Status.  
3. On the dialog that appears, click the Support  
Network Setting  
Security Key  
tab.  
0 entered  
= Number  
a Lower case  
b Delete  
4. On the Support tab, click the Details button.  
A
B
I
C
J
D
K
R
Y
E
L
S
Z
F
M
T
G
N
U
The Network settings are displayed.  
H
O
V
P
W
Q
X
To Enter the Network settings into your player,  
c Space  
follow these steps:  
m
Move  
"
Enter  
'
Return  
1. On the Internet Protocol Setup screen, press  
the ENTER button.  
2. Press the ▲▼ buttons to select Manual, and  
then press the ENTER button.  
9. To enter the Pass Phrase, follow these  
3. Press the ▼ button to go to the first entry field  
general directions:  
(IP Address).  
Press the number keys on your remote to  
enter numbers.  
Network Setting  
Use the arrow keys on your remote to move  
from button to button on the Security Key  
screen.  
Select a network  
Internet Protocol Setup  
IP Address  
: Not Selected  
: Manual  
\
:
:
:
0
0
0
0
0
0
Subnet Mask  
255 255 255  
Pressing the RED (A) button on the remote  
lets you change the text displayed on  
the buttons to lower case, upper case,  
numbers, or icons.  
Gateway  
0
0
0
DNS  
: Manual  
DNS Server  
:
0
0
0
0
@
PBC(WPS)  
>
Move  
"
Enter  
'
Return  
To enter a letter or symbol, move the cursor  
to the letter or symbol, and then press the  
ENTER button.  
4. Use the number buttons to enter numbers.  
To delete the last letter or number you  
entered, press the GREEN (B) button.  
5. When done with each field, use the ► button  
to move successively to the next field.  
You can also use the other arrow buttons to  
move up, down, and back.  
10. When done, press the BLUE (D) button on  
your remote, and then press the ENTER  
button.  
English  
ꢂ1  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setup  
6. Enter the IP Address, Subnet Mask, and  
NOTE  
Gateway values.  
What is a valid certificate?  
When the player uses BD-LIVE to send the disc data  
and a request to the server to certify the disc, the  
server uses the transferred data to check if the disc is  
valid and sends the certificate back to the player.  
7. Press the ▼ to go to DNS.  
8. Press the ▼ button to go to the first DNS  
entry field. Enter the numbers as above.  
9. When done, press the ▲ button to return to  
Access Point Selection. Select the network,  
and then press the ENTER button.  
The Internet connection may be restricted while you  
are using BD-LIVE contents.  
10. Go to Step 6 in the Automatic Wireless  
procedure above, and follow the directions  
from that point on.  
Language  
You can select the language you prefer for the  
Network Test  
Home menu, disc menu, etc.  
Use this menu to connect to the wired network  
or check whether your network connection is  
working or not.  
On-Screen Menu : Select the language for the  
on-screen displays.  
Disc Menu : Select the language for the disc  
menu displays.  
Audio : Select the language for disc audio.  
Subtitle : Select the language for disc subtitles.  
Network Test  
MAC Address (00:00:00:00:00:00)  
IP Address, Subnet, Gateway, DNS Server  
Gateway Ping  
NOTE  
×
The selected language only appears if it is supported  
on the disc.  
Internet Service Test  
The network configuration (IP) is not valid. Check the  
network settings and enter a valid value before trying  
again.  
'
Return  
Security  
When you operate this menu for the first time, the  
password setup screen appears.  
Enter a desired 4-digit password using the number  
buttons.  
Network Status  
Check whether a connection to the network and  
the Internet have been established.  
Parental Rating  
BD-LIVE Internet Connection  
The Parental Rating works in conjunction with Blu-  
ray Disc/DVDs that have been assigned a rating,  
which helps you control the types of Blu-ray Disc/  
DVDs that your family can watch.  
Select whether to allow an Internet connection  
when you are using the BD-LIVE service.  
Allow (All) : The Internet connection is allowed  
for all BD-LIVE contents.  
To use this function, select a rating level that  
restricts the player to playing discs with ratings  
appropriate for your family.  
Allow (Valid Only) : The Internet connection is  
allowed only for BD-LIVE contents containing a  
valid certificate.  
A larger number indicates that the program is  
intended for adult audiences only. When you  
select a rating number, you should select the  
highest rating number you want the player to be  
able to play. For example, if you select Level 6, the  
player will play discs rated 6 and below, and will  
not play discs rated Level 7 or 8.  
Prohibit : No Internet connection is allowed for  
any BD-LIVE content.  
ꢂꢀ  
English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Front Display  
Settings  
Display  
Parental Rating  
Off  
Change the brightness of the front panel.  
Audio  
Change Password  
8 (Adults)  
Auto : Dim during playback.  
System  
Network  
Language  
Security  
General  
Support  
7
6
5
4
3
Dim : Dim the display window.  
Bright : Brighten the display window.  
2
Power On/Off Sound  
Play a melody when the player is turned on and off.  
On : Turn Power Sound On.  
Change Password  
LiOgfhf :tTEurfnfePocwter Sound Off.  
Change the 4-digit password used to access  
security functions.  
You can activate or deactivate the light effect on  
the top of the product.  
If you forgot your password  
Always On : Activate Light Effect at all times.  
1. Remove the disc.  
Select this for retail display.  
2. Press and hold the STOP (  
) button on the  
Auto : Activate Light Effect when you turn the  
player on and off or when moving the tray.  
Select when installing the player in your home.  
front panel for 5 seconds or more.  
All settings will revert to the factory settings.  
NOTE  
Off : Turn Light Effect off at all times.  
When the factory default settings are restored, all  
the user data stored in BD data is deleted.  
General  
Background  
Change the background theme of the menu screen.  
Settings  
Background  
Dis
A
Skin 1  
S
N
L
S
G
S
Skin 2  
Skin 3  
Skin 4  
Skin 5  
ct  
'
Return  
English  
ꢂꢁ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setup  
You can also update software in any of the two  
ways as follows: Software update is the same as  
in the By Internet menu.  
Support  
Software Upgrade  
then download and store the latest software  
(RUF file) onto a USB flash drive. Connect the  
USB flash drive to the USB port of the player  
(the disc tray must be empty) to update the  
software, then follow the on-screen instructions.  
This menu allows you to upgrade software  
for performance improvements or additional  
services. You can check the current software  
version, upgrade using the Internet and set the  
Auto upgrade notification. If the player is properly  
connected to the network by cable or wirelessly,  
the player automatically connects to Samsung's  
website each time it is turned on and downloads  
update files if any valid upgrade exists.  
bluraysupport, download and write the latest  
software (RUF file) onto a disc. Insert and play  
the disc in the player to start the update, then  
follow the on-screen instructions.  
Settings  
Display  
NOTE  
Software upgrades using the USB Host jack must be  
performed with no disc inside.  
Software Upgrade  
ie
Audio  
System  
Network  
Language  
Security  
General  
Support  
Current Version  
: XXX-XXXXXXXXX  
\
If you want to cancel the upgrade in the process of  
downloading the upgrade data, press the ENTER  
button.  
By Internet  
Auto Upgrade Notification : On  
>
Move  
"
Select  
'
Return  
When the system upgrade is done, check the  
software details in the software Upgrade menu.  
Do not turn off the player during the System  
Upgrade. It may cause the player not to work  
properly.  
1. To select By Internet, press the ENTER  
button.  
Software upgrades using the USB Host jack must be  
A popup message will appear if an update is  
performed with a USB memory flash stick only.  
available, asking if you want to upgrade.  
2. If you select Yes, the player turns off  
automatically, restarts and then begins the  
upgrade. (Do not turn it on manually here.)  
Contact Samsung  
Provide contact information for assistance with  
your player.  
3. The update progress popup will appear.  
When the update is complete, the player turns  
off again automatically.  
4. Press the POWER button to turn on the  
player.  
NOTE  
The Update is complete when the player turns off  
after restarting. Press the POWER button to turn on  
the updated player for your use.  
Never turn the player off or on manually during the  
update process.  
Samsung Electronics shall take no legal responsibility  
for player malfunction caused an unstable internet  
connection or consumer negligence during software  
upgrade.  
ꢂꢂ  
English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Basic Functions  
Playing a Disc  
Using the Disc menu/Title menu/  
Popup menu  
Playback  
Using the Disc Menu  
1. Press the OPEN/CLOSE (  
) button to  
open the disc tray.  
hZ  
2. Place a disc gently into the tray with the disc’s  
1. During playback, press the DISC MENU  
label facing up.  
button on the remote control.  
3. Press the OPEN/CLOSE (  
) button to  
2. Press the ▲▼◄► buttons to make  
the desired selection, then press the  
ENTER button.  
close the disc tray.  
4. Press the PLAY (  
) button.  
NOTE  
Playback related buttons  
Depending on the disc, the menu items may differ or  
this menu may not be available.  
PLAY (  
STOP (  
PAUSE (  
)
Starts playback.  
Stops playback.  
Using the Title Menu  
If you press the button once : The  
stop position is memorized.  
)
If you press the button twice : The  
Z
stop position is not memorized.  
1. During playback, press the TITLE MENU  
)
Pauses playback.  
button on the remote control.  
2. Press the ▲▼◄► buttons to make  
the desired selection, then press the  
ENTER button.  
NOTE  
For some discs, pressing the STOP (  
)
button  
once may not memorize the resume position.  
NOTE  
Depending on the disc, the menu items may differ or  
this menu may not be available.  
Disc Structure  
The contents of disc are usually divided as below.  
Playing the Title List  
Blu-ray Disc, DVD-VIDEO  
title 1  
title 2  
chapter 1 chapter 2 chapter 1 chapter 2 chapter 3  
1. During playback, press the DISC MENU  
Audio CD (CD-DA)  
or TITLE MENU button.  
2. Press the ▲▼ buttons to select an  
entry you want to play from Title List,  
then press the ENTER button.  
track 1  
track 2  
track 3  
track 4  
track 5  
file 3  
MP3, WMA, DivX, MKV and MP4  
NOTE  
folder (group) 1  
folder (group) 2  
file 1 file 2  
If your disc has a playlist, press the GREEN (B)  
file 1  
file 2  
button to go to the Playlist.  
English  
ꢂꢃ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Basic Functions  
Using the Popup Menu  
Skipping Chapters  
h
h�Z  
)
During playback, press the SKIP (  
1. During playback, press the POPUP  
button.  
MENU button on the remote control.  
If you press the SKIP (  
) button, the disc  
) button, the disc  
2. Press the ▲▼◄► buttons or ENTER  
moves to the next chapter.  
button to select the desired menu.  
If you press the SKIP (  
NOTE  
moves to the beginning of the chapter. One  
more press makes the disc move to the  
beginning of the previous chapter.  
Depending on the disc, the menu items may differ or  
this menu may not be available.  
Using the Search and Skip Functions  
Slow Motion Play/Step Motion Play  
During play, you can search quickly through a  
chapter or track, and use the skip function to  
jump to the next selection.  
Slow Motion Play  
h�Z�  
)
Searching for a Desired Scene  
h�Z�  
In pause mode, press the SEARCH (  
button.  
Each time you press the SEARCH (  
) button,  
During playback, press the SEARCH (  
)
the playback speed is reduced as follows:  
button.  
*
1/8  
*
1/4  
*
1/2  
Each time you press the SEARCH (  
)
To return to normal speed playback, press the  
button, the playback speed changes as follows.  
PLAY (  
) button.  
NOTE  
BD-ROM,  
)
)
1   
)
)
2   
)
)
3   
BD-RE/-R,  
DVD-RW/-R,  
DVD+RW/+R,  
DVD-VIDEO  
No sound is played during slow mode.  
4   
5   
6   
)
(
7
7
Slow motion operates only in the forward direction  
Slow motion can not operate on DivX discs.  
(
(
1   
(
(
2   
(
(
3   
4   
5   
6   
)
(
1   
)
(
2   
)
(
3
DivX, MKV, MP4  
Step Motion Play  
1   
2   
3
To return to normal speed playback, press the  
h�Z�  
) button.  
PLAY (  
) button.  
In pause mode, press the PAUSE (  
NOTE  
Each time the PAUSE (  
) button is pressed,  
No sound is played during search mode.  
a new frame appears.  
To return to normal speed playback, press the  
PLAY (  
) button.  
NOTE  
No sound is played during step mode.  
Step motion operates only in the forward direction.  
Step motion can not operate on DivX discs.  
ꢂꢄ  
English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4. Press the ENTER button at the point where  
Repeat Playback  
you want repeat play to stop (B).  
5. To return to normal play, press the REPEAT  
Repeat the Title or Chapter  
button again.  
6. Press the ENTER button.  
h�Z�  
NOTE  
Repeat the disc title or chapter.  
If you set point (B) before 5 seconds has elapsed,  
the prohibition message will appear.  
Depending on the disc, the Repeat function may  
not be available.  
1. During playback, press the REPEAT  
Using the TOOLS button  
button on the remote control.  
During playback, you can operate disc  
menu by pressing the TOOLS button.  
2. Press the ▲▼ buttons to select Chapter or  
Title, then press the ENTER button.  
Tools Menu Screen  
Repeat  
Chapter  
Tools  
:
Title  
1/1  
4/21  
Chapter  
Playing Time  
Audio  
:
00:12:06  
:
:
:
1/7 ENG Multi CH  
3. To return to normal play, press the REPEAT  
Subtitle  
Angle  
1/6 ENG  
1/1  
button again.  
BONUSVIEW Video :  
BONUSVIEW Audio :  
Picture Setting  
Off  
4. Press the ▲▼ buttons to select Off, then  
0/1 Off  
press the ENTER button.  
<Change  
Select  
"
Repeat the Section  
NOTE  
h�Z�  
Depending on the disc, the Tools menu may differ.  
1. During playback, press the REPEAT  
button on the remote control.  
Moving to a Desired Scene Directly  
h�Z�  
2. Press the ▲▼ buttons to select Repeat A-B.  
1. During playback, press the TOOLS button.  
Repeat  
Repeat A-B : Off  
"Mark A  
2. Press the ▲▼ buttons to select Title, Chapter  
or Playing Time.  
3. Enter the desired Title, Chapter or Playing  
Time using the number buttons, then press  
the ENTER button.  
3. Press the ENTER button at the point where  
you want repeat play to start (A).  
English  
ꢂꢅ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Basic Functions  
NOTE  
Selecting the Audio Language  
h�Z�  
Depending on the Blu-ray Disc / DVD, you may be  
able to change the desired subtitle in the Disc Menu.  
Press the DISC MENU button.  
You can also operate this function by  
pressing the AUDIO button on the  
remote control.  
This function depends on which subtitles are  
encoded on the disc and may not be available on all  
Blu-ray Discs/DVDs.  
A Blu-ray Disc can contain up to 255 subtitle  
languages and a DVD up to 32.  
1. During playback, press the TOOLS button.  
Information about the primary / secondary mode  
will also be displayed if the Blu-ray Disc has a  
BONUSVIEW section.  
2. Press the ▲▼ buttons to select Audio.  
3. Press the ◄► buttons to select the desired  
audio language.  
This function changes both the primary and  
NOTE  
secondary subtitles at the same time.  
The ◄► indicator will not be displayed on the  
screen if the BONUSVIEW section does not contain  
any BONUSVIEW audio settings.  
The total number of subtitles is the sum of the  
primary and secondary ones.  
If you press the SUBTITLE button on the remote  
Information about the primary / secondary mode  
will also be also displayed if the Blu-ray Disc has a  
BONUSVIEW section.  
control, the subtitle bar is displayed.  
Press the RETURN button to remove the subtitle bar.  
Use the ◄► button to switch between primary and  
secondary audio modes.  
Changing the Camera Angle  
This function depends on which audio languages are  
encoded on the disc and may not be available.  
hZ  
A Blu-ray Disc can contain up to 32 audio languages  
and a DVD up to 8.  
When a Blu-ray Disc/DVD contains multiple angles  
of a particular scene, you can use the ANGLE  
function.  
Some Blu-ray Discs may allow you to select either  
the multi-channel LPCM or Dolby digital audio  
soundtrack in English.  
1. During playback, press the TOOLS button.  
2. Press the ▲▼ buttons to select Angle.  
If you press the AUDIO button on the remote control,  
3. Press the ◄► buttons to select the desired  
the Audio bar will be displayed.  
Angle.  
Press the RETURN button to remove the Audio bar.  
Selecting the Picture Setting  
Selecting the Subtitle Language  
hZ�  
You can also operate this function by  
pressing the SUBTITLE button on the  
remote control.  
h�Z�  
This function lets you adjust video quality when  
your player is connected to a TV via HDMI.  
1. During playback, press the TOOLS button.  
2. Press the ▲▼ buttons to select Picture Setting,  
then press the ENTER button.  
1. During playback, press the TOOLS button.  
3. Press the ◄► buttons to select the desired  
2. Press the ▲▼ buttons to select Subtitle.  
Picture Setting, then press the ENTER button.  
3. Press the ◄► buttons to select the desired  
subtitle language.  
ꢂꢆ  
English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Dynamic : Choose this setting to increase  
Listening to Music  
Sharpness.  
Normal : Choose this setting for most  
o  
viewing applications.  
Buttons on the Remote Control  
Movie : This is the best setting for watching  
movies.  
used for Music Playback  
User : You user can adjust the sharpness  
and noise reduction functions respectively.  
@
Setting BONUSVIEW  
SUBTITLE  
AUDIO  
h
!
0
9
8
1
The BONUSVIEW feature allows you to view  
additional content (such as commentaries) in a  
small screen window while the movie is playing.  
This function is only available if the disc has the  
Bonusview feature.  
2
3
TOOLS  
INFO  
EXIT  
You can also operate this function by  
pressing the BONUSVIEW button on  
the remote control.  
4
RETURN  
7
5
6
1. During playback, press the TOOLS button.  
INTERNET@ FULL SCREEN REPEAT  
2. Press the ▲▼ buttons to select BONUSVIEW  
Video or BONUSVIEW Audio.  
SEARCH buttons : Fast Play.  
3. Press the ◄► buttons to select the desired  
1
(Audio CD (CD-DA) only)  
bonusview.  
NOTE  
PAUSE button : Pauses playback.  
2
3
If you switch from BONUSVIEW Video, BONUSVIEW  
Audio will change automatically in accordance with  
BONUSVIEW Video.  
PLAY button : Plays the currently selected track.  
▲▼ buttons : Selects a track in the Music List or  
4
5
6
7
Playlist.  
Tools  
YELLOW (C) button : Select or deselect a track in  
BONUSVIEW Video  
BONUSVIEW Audio :  
Picture Setting  
Off  
0/1 Off  
the music list.  
<Change  
Select  
REPEAT button : Selects the play mode in the  
"
Playlist.  
ENTER button : Plays and pauses the selected  
track.  
◄► buttons : Jump Play.  
8
9
(except for the Audio CD (CD-DA))  
STOP button : Stops a track.  
SKIP button : During playback, moves to the next  
page in the Music List or moves to the next track in  
the Playlist.  
0
English  
ꢂꢇ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Basic Functions  
SKIP button : During playback, moves to the  
previous page in the Music List or moves to the  
previous track in the Playlist.  
Shows the current play time/total play time.  
Displays the current playback status  
Displays the repeated playback status.  
5
6
7
If you press this button after three seconds of  
!
playback in the Playlist, the current track is  
replayed from the beginning. But, if you press this  
button within three seconds after playback starts in  
the Playlist, the previous track is played.  
2. Press the ▲▼ buttons to select the track  
you want to play, and then press the ENTER  
button.  
NUMBER buttons : During the Playlist playback,  
is played.  
press the desired track number. The selected track  
@
Repeat an Audio CD (CD-DA)/MP3  
1. During the Playlist playback, press the  
REPEAT button.  
2. Select the desired play mode by  
Playing an Audio CD (CD-DA)/MP3  
pressing the REPEAT button repeatedly.  
1. Insert an Audio CD (CD-DA) or an MP3 Disc  
Tracks on a disc are  
into the disc tray.  
Audio CD  
played in the order in  
Audio CDs (CD-DA) play automatically.  
Off  
(CD-DA)/MP3 which they were recorded  
To start an MP3 disc, press the ◄►  
buttons to select Music, then press the  
ENTER button.  
on the disc.  
Audio CD  
(
(
(
) Track  
) One  
) All  
Current track is repeated.  
(CD-DA)  
Audio CD (CD-DA)/MP3 Screen Elements  
MP3  
Current track is repeated.  
All tracks are repeated.  
Audio CD  
1
2
3
(CD-DA)/MP3  
Playlist  
1/6  
The random option plays  
a disc's tracks in random  
order.  
Audio CD  
TRACK 001  
TRACK 001  
TRACK 002  
TRACK 003  
TRACK 004  
TRACK 005  
TRACK 006  
(
) Shuffle  
05:57  
(CD-DA)/MP3  
04:27  
04:07  
03:41  
03:17  
7
6
+
00:08 / 05:57  
Playlist  
03:35  
1. Insert an Audio CD (CD-DA) or an MP3 Disc  
Pause  
Tools  
Return  
"
'
into the disc tray.  
Audio CDs (CD-DA) play automatically.  
To start an MP3 disc, press the ◄►  
buttons to select Music, then press the  
ENTER button.  
5
4
Displays the music information.  
Displays the playlist.  
Display the current track/total tracks.  
Displays control buttons available.  
1
2
3
4
2. To move to the Music List, press the STOP (  
or RETURN button.  
)
The Music List screen is displayed.  
ꢃ0  
English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3. Press the ▲▼◄► buttons to move desired  
track, then press the YELLOW (C) button to  
check desired tracks.  
Playing back a Picture  
G
Repeat this procedure to select additional  
tracks.  
Playing a JPEG Disc  
Music TRACK 003  
3 files selected 1/2 Page  
1. Insert a JPEG disc into the disc tray.  
TRACK 001  
TRACK 002  
2. Press the ◄► buttons to select Photos and  
00:05:57  
00:04:27  
TRACK 003  
00:04:07  
TRACK 004  
then press the ENTER button.  
00:03:41  
TRACK 005  
TRACK 006  
00:03:35  
3. Press the ▲▼◄► buttons to select the folder  
you want to play, and then press the ENTER  
button.  
00:03:17  
TRACK 007  
00:03:47  
TRACK 008  
00:03:49  
TRACK 009  
TRACK 010  
00:03:45  
00:03:53  
4. Press the ▲▼◄► buttons to select the photo  
you want to play, and then press the ENTER  
button.  
()  
CDDA  
c
Select  
Jump page  
'
Return  
The Slide Show starts automatically.  
4. If there is an undesired track in the playlist,  
press the YELLOW (C) button again.  
The selected track is deleted.  
NOTE  
You can't enlarge the subtitle and PG graphic in the  
full screen mode.  
5. Press the ENTER button to play the selected  
tracks.  
Selected tracks play automatically play.  
Using the TOOLS button  
Playlist  
1/3  
TRACK 001  
TRACK 001  
TRACK 002  
TRACK 003  
During the slide show playback, you  
can use various function by pressing the  
TOOLS button.  
05:57  
04:27  
04:07  
+
00:08 / 05:57  
Tools  
Stop Slide Show  
Slide Show Speed :  
Normal  
Pause  
Tools  
Return  
"
'
Slide Show Effect  
Background Music  
Zoom  
:
Fade1  
Rotate  
Information  
6. To go to the Music List, press the STOP (  
)
>Move  
"
Enter  
'
Return  
or RETURN button.  
7. To go to the Playlist, press the ENTER  
button.  
NOTE  
Stop Slide Show : Select if you want to stop  
the slide show.  
You can create a playlist with up to 99 tracks on  
Audio CD (CD-DA).  
Slide Show Speed : Select if you want to  
adjust the Slide Show speed.  
Slide Show Effect : Select if you want to set  
the Slide Show Effect.  
Background Music : Select if you want to listen  
to music while viewing a picture.  
English  
ꢃ1  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Basic Functions  
Zoom : Select if you want to enlarge the current  
5. Press the ▲▼ buttons to select USB, then  
picture. (Enlarged up to 4 times)  
press the ENTER button.  
Rotate : Select if you want to rotate the picture.  
(This rotates the picture either clockwise or  
counter clockwise.)  
6. Press the ◄► buttons to select the desired  
Videos, Music or Photos, then press the  
ENTER button. Go to Step 7.  
Information : Shows the picture information  
-1  
4 . Press the BLUE (D) button, the screen below  
including the name and size, etc.  
NOTE  
appears. Go to 5-1.  
To enable the Background Music function, both  
music and MP3 files must be contained in the same  
folder. However, the sound quality can be affected  
by the bit rate of the MP3 file, the size of the photo  
and the encoding method.  
Please activate Internet@TV service  
to enjoy a variety of Internet Services.  
USB  
USB  
d Home  
Enter  
"
Playing back a USB Storage Device  
-1  
5 . Press the ◄► buttons to select USB, then  
You can use the USB connection to play multimedia  
files (MP3, JPEG, DivX, etc.) downloaded from a  
USB storage device.  
press the ENTER button.  
-1  
6 . Press the ▲▼ buttons to select the desired  
Videos, Music or Photos, then press the  
1. Move to the Home menu.  
ENTER button.  
2. In Stop mode, connect the USB storage  
device to the USB port on the front panel of  
the player.  
7. For playing back Video, Music or Photo files,  
refer to pages 45~52.  
The message “Do you want to access the  
NOTE  
device?” is displayed.  
You must remove the USB storage device safely  
(by performing the “Safe to Remove USB” function)  
to prevent possible damage to the USB memory.  
Press the MENU button to move to the Home menu,  
Then, press the YELLOW (C) button and then press  
the ENTER button.  
3. Press the ◄► button to select Yes, then  
press the ENTER button.  
4. Press the RED (A) button or the BLUE (D)  
button.  
If you pressed the RED (A) button, go to Step 5.  
If you pressed the BLUE (D) button, go to Step  
4-1.  
When Audio-CD (CD-DA), MP3 and JPEG files are in  
stop mode, the FULL SCREEN button on the remote  
does not work.  
If you insert the a disc when playing a USB storage  
device, the device mode is changed to “DVD or CD”  
automatically.  
Please activate Intern  
e
t
@
T
V service  
to enjoy a variety of Internet Services.  
CD  
USB  
USB  
a
Change Device  
c
Safely Remove USB  
d
View Devices  
Enter  
"
ꢃꢀ  
English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Network Services  
You can enjoy various network services such as  
Internet@TV or BD-LIVE by connecting the player  
to your network.  
4. After you have signed off on the service  
agreement, the Internet@TV service starts  
updating. It takes several minutes. When the  
update is complete, you will see the Internet@  
TV menu screen.  
Check the following instructions before using  
any network service.  
Internet@TV at a Glance  
1. Connect the player to the network.  
(See pages 27~28)  
2. Configure the network settings.  
1
2
3
(See pages 38~42)  
Recommended  
Using Internet@Tv  
My Applications  
by Date 1/3  
Connect this player to the network to download  
various for a fee or free-of-charge applications.  
Internet@TV brings useful and entertaining content  
and services directly from the web to your player  
such as news, weather forecasts, stock market  
quotes, games, movies and music.  
Samsung Apps Settings  
a
Login  
b
Mark as Favorite  
d
Sort by  
Return  
'
6
5
4
You can also initiate this function by  
pressing the INTERNET@ button on  
the remote control.  
Commercial : Displays Internet@TV Guide, product  
1
introduction and new application introduction.  
Recommended : Displays recommended contents  
2
3
managed by Samsung.  
Getting Started with Internet@TV  
My Applications : Displays your personal gallery in  
1. Move to the Home menu.  
which you can add and delete applications.  
Navigation Help : Displays remote control buttons  
Please activate Intern  
e
t
@
T
V service  
available.  
to enjoy a variety of Internet Services.  
RED (A) : To log in to Internet@TV.  
4
GREEN (B) : To mark the application as a favorite.  
BLUE (D) : To sort the applications.  
Return : To return to the previous menu.  
Settings : You can set up the system and create  
5
6
No Disc  
a Change Device  
d View Devices  
Enter  
"
accounts, etc.  
Samsung Apps : You can download various for a  
2. Press the ◄► buttons to select Internet@TV  
fee or free-of-charge application services.  
and press the ENTER button.  
3. In the start screen of the Internet@TV service,  
you will see the service agreement screen. You  
must agree to the service terms and conditions  
before you can use the Internet@TV service.  
English  
ꢃꢁ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Network Services  
12. Press buttons on the remote to input the rest  
Using the Keypad  
of ‘Challenger Rd., Ridgefield Park NJ’.  
Through your remote, you can use the On-Screen  
Keypad in several Internet@TV applications to  
enter text.  
13. Press the ENTER button.  
14. The map and address appear on the screen.  
Pressing the SUBTITLE button on the remote  
while you are using the Screen Keypad lets you  
change the text fields to lower case, upper case,  
numbers and icons.  
NOTE  
Samsung Electronics shall take no legal responsibility  
for any interruption of the Internet@TV service  
caused by the service provider for any reasons.  
The Internet@TV service is to download and process  
data via the Internet so that you can enjoy the  
contents on the TV screen.  
abc  
jkl  
tuv  
def  
mno  
wxyz  
ghi  
pqrs  
If the Internet connection is unstable, the service  
may be delayed or interrupted.  
Input Mode  
Delete  
Furthermore, the player may be turned off automatically.  
If this is the case, check the Internet connection and  
try again.  
a
A
1
The application service may be provided in English  
only and the contents available may vary, depending  
on the area.  
For example, here is how to use the Keypad to  
search for an address in Google Maps:  
1. Press the ENTER button on the remote at the  
When you use an application service, the FULL  
SCREEN button on the remote control does not  
operate.  
Google Maps icon at the Internet@TV.  
2. Press the GREEN (B) button to use the  
SEARCH function.  
For more information about the Internet@TV service,  
visit the web site of the applicable service provider.  
3. Press the ◄► buttons to move to the “Search  
or address” window.  
The services provided are subject to change,  
depending on the Internet@TV service provider.  
4. Press the ENTER button to use Search or  
address function.  
The Internet@TV service contents may differ  
according to the firmware version.  
5. For example, suppose that you want to input  
‘105 Challenger Rd., Ridgefield Park NJ’.  
For-a-fee DivX contents with copy protection can  
only be played using HDMI cable.  
6. Press the SUBTITLE button on the remote  
twice to change the input mode from lower  
case to numbers.  
If you have connected your player to your TV using  
Component or video cables, the DivX video signal  
can not output or the popup message “Connect  
with a HDMI cable to play this file.”or “Cannot play  
current file” will be displayed.  
7. Press ‘1’, ‘0’, ‘5’.  
8. Press the YELLOW (C) button on the remote  
to input a blank space.  
9. Press the SUBTITLE button on the remote  
3 times to change the input mode from  
numbers to upper case.  
10. Press ‘2’ button on the remote 3 times to  
input C.  
11. Press the SUBTITLE button on the remote 3  
times to change the input mode from upper  
case to lower case.  
ꢃꢂ  
English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Account Login  
System Setup  
For a more enjoyable application experience,  
register and log in to your account.  
Reset  
To do this, you must create an account first.  
(For instructions on creating an account, refer to  
Internet@TV ID on this page)  
1. Press the ▲▼◄► buttons to select the  
desired application and press the RED (A)  
button.  
Resets Internet@TV settings to factory default  
settings.  
NOTE  
If you forgot your password, press the STOP (  
)
button on the front panel of the player for more than  
5 seconds with no disc inserted.  
Login  
Internet@TV ID  
Use this menu to create or delete an account and  
enter or delete account information.  
User Account :  
Password :  
admin  
You can control your account including contents  
site’s account information.  
This account is only for Internet@TV.  
a Create  
[0~9] Enter PIN  
'
Cancel  
Create  
Create an account and link it with desired service  
applications.  
2. Enter the user account and password.  
NOTE  
Settings  
The account name must be at least 1 character in  
length but no more than 8.  
Create IDs and configure Internet@TV settings on  
this screen.  
You can register up to 10 User Account Names.  
Settings  
Manager  
. System setup  
Change the Service Lock password  
Service Site : Register login information for  
. Internet@TV ID  
. Service Manager  
. Properties  
Reset  
service sites.  
Change Password : Change account name  
password.  
Delete : Delete the account name.  
'
Cancel  
English  
ꢃꢃ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Network Services  
Using the color buttons with the Samsung  
Apps  
Service Manager  
Delete and lock applications installed to Internet@  
RED (A) (Login) : To log in to the internet  
TV.  
service.  
GREEN (B) (Thumbnail View) : To change the  
Lock  
view mode.  
Lock the application. Accessing a locked  
application requires a password.  
BLUE (D) (Sort By) : To sort the applications by  
Featured, Most Downloaded, Most Recent or  
Name.  
Delete  
NOTE  
Delete the application.  
The available Internet contents services may be  
added or deleted.  
Properties  
Display information about Internet@TV. Use the  
"Check the speed of your internet connection"  
option to test your network connection.  
Samsung Apps  
Various applications are available from here,  
organized into different categories. Some  
applications have a download fee.  
Samsung Apps  
Video  
1/1  
Name  
Featured  
Most downloaded  
Most recent  
What's New?  
Video  
YouTube  
Free  
Sports  
TV store Test User002  
Lifestyle  
Games  
Infomation  
Other  
My page  
Help  
a Login b Thumbnail View d Sort By  
'
Return  
My page  
Displays the application list.  
Help  
If you questions about Internet@TV, check this  
section first. If none of the tips apply, please visit  
the help website.  
ꢃꢄ  
English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BD-LIvE™  
Using the AllShare Function  
Once the player is connected to the network, you  
can enjoy various movie-related service contents  
using a BD-LIVE compliant disc.  
AllShare lets you play music, video and photo files  
in your PC using the player.  
To use AllShare, you must connect the player to  
your PC via the network (See pages 27~28) and  
install the SAMSUNG PC Share Manager on the  
PC. To install and use Share Manager, follow  
these steps.  
1. Check the size of the remaining memory.  
The memory device must have at least 1GB  
of free space to accommodate the BD-LIVE  
services.  
2. Insert a Blu-ray disc that supports BD-LIVE.  
com.  
3. Select an item from various BD-LIVE service  
2. Download the SAMSUNG PC Share Manager  
contents provided by the disc manufacturer.  
and install it on your PC.  
NOTE  
3. When the installation is complete, you will see  
the SAMSUNG PC Share Manager icon on  
your desktop.  
The way you use BD-LIVE and the provided contents  
may differ, depending on the disc manufacturer.  
Double-click the icon to launch the application.  
Software Upgrade Notification  
4. Select a folder to share from the My computer  
pane, and click the Share Folder Enabled  
icon ).  
When connected to the network, the player can  
notify you if a new software version is available.  
(To remove a shared folder : Select a folder to  
remove from the shared folders, and click the  
Share Folder Disabled icon ).)  
1. Turn on the player.  
2. In the Software Upgrade menu, set Auto  
Upgrade Notification to On. (See page 44)  
If there is a new software version available, the  
player notifies you with a popup message.  
5. To apply the updated sharing state to the  
server, click the Set Change State icon ).  
6. To enable the player to locate a PC server,  
click Share from the menu bar.  
3. To upgrade the firmware, select Yes on the  
Pop-up. The player turns off automatically,  
then restarts, and begins the download.  
(Never turn on the player manually here.)  
Click Set Device Policy and click Accept.  
SAMSUNG PC Share Manager  
File Share Server Help  
4. The update progress popup appears.  
When the update is complete, the player turns  
off again automatically.  
Server : PC Share Manager  
Set Device Policy  
My Co
Delete  
Item  
IP  
Device  
State  
SSeetleSctteadte  
C:
settin..  
Nam
Accept  
XXX.XXX.X.XX SAMSUNG Blu-ray Disc Player  
Deny  
F
5. Press the POWER button to turn on the  
F
F
player.  
OK  
Cancel  
NOTE  
Update is complete when the player turns off after  
restarting. Press the POWER button to turn on the  
updated player for your use.  
Never turn the player off or on manually during the  
7. Click the Set Change State icon ) and  
update process.  
move to the home menu on player.  
Samsung Electronics shall take no legal responsibility  
for player malfunction caused by unstable of internet  
connection or consumer negligence during software  
upgrade.  
English  
ꢃꢅ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Network Services  
8. To select a device, use the RED (A) or BLUE (D)  
button to select a file to play.  
AllShare Program at a Glance  
(For playing back Video, Music or Photos files,  
6
1
see pages 45~52.)  
SAMSUNG PC Share Manager  
File Share Server Help  
Server : PC Share Manager  
2 3 4 5  
My Computer  
e
t
@
T
V service  
Shared Folder  
Please activate Intern  
to enjoy a variety of Internet Services.  
C: Document and settings Admin  
Folder  
Full Path  
Folder 1  
C: Document and settin..  
Name  
Size  
Kind  
Folder 1  
File  
Folder 2  
Folder 3  
File  
File  
No Disc  
a Change Device  
d View Devices  
Enter  
"
8
7
NOTE  
Menu Bar  
1
2
Depending on the performance of the external  
modem or router, HD video may not play properly.  
Share Folder Enabled icon : Use this if you want to  
select a folder in your PC to share.  
If your system uses a firewall, the player may not  
locate your PC on the TV screen.  
Share Folder Disabled icon : Use this if you want  
3
4
to set folder sharing off.  
AllShare does not support the following functions.  
-
-
The Background Music and Background Music  
Setting functions.  
Refresh icon : Use this if you want to refresh list of  
folders and files in My Computer.  
Sorting files by preference in the Photo, Music  
and Movie folders.  
Set Change State icon : Select a folder to share  
and don’t forget to press this button.  
5
-
-
The Change Group function.  
The Safe Remove function.  
The updated state will be applied to the server.  
Server : Displays the name of the sharing server.  
6
7
The Sorting method may differ depending on the  
Shared Folder : Displays a list of the shared folders.  
server function.  
My Computer : Displays a list of the folders and  
The search and skip operation may differ depending  
on the server function.  
8
files in the PC.  
During video playback, play time is not display.  
To use the AllShare function, please place both this  
player and PC in same subnet.  
ꢃꢆ  
English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix  
Troubleshooting  
Before requesting service, please check the following.  
PROBLEM  
SOLUTION  
No operation can be performed with the  
Check the batteries in the remote control. They may need replacing.  
Operate the remote control at a distance of no more than 6.1m.  
remote control.  
Remove batteries and hold down one or more buttons for several minutes  
to drain the microprocessor inside the remote control to reset it. Reinstall  
batteries and try to operate the remote control again.  
Disc does not play.  
Ensure that the disc is installed with the label side facing up.  
Check the region number of the Blu-ray Disc/DVD.  
Disc Menu does not appear.  
Ensure that the disc has disc menus.  
The prohibition message appears on the  
screen.  
This message appears when an invalid button is pressed.  
The Blu-ray Disc/DVD’s software doesn’t support the feature (e.g., angles)  
You’ve requested a title or chapter number or search time that is out of  
range.  
Play mode differs from the Setup Menu  
selection.  
Some of the functions selected in the Setup Menu may not work properly if  
the disc is not encoded with the corresponding function.  
The screen ratio cannot be changed.  
The screen aspect ratio is fixed on your Blu-ray Disc/DVDs.  
This is not a problem with the player.  
No audio.  
Make sure you have selected the correct Digital Output in the Audio Options  
Menu.  
The screen is blocked  
Press the STOP (  
) button (on the front panel) for more than 5 seconds  
with no disc inside. All settings will revert to the factory settings.  
When the factory default settings are restored, all the stored user BD data  
is deleted.  
If the HDMI output is set to a resolution your  
TV cannot support (for example, 1080p), you  
may not see a picture on your TV.  
Press the STOP (  
) button (on front panel) for more than 5 seconds with  
no disc inside. All settings will revert to the factory settings.  
When the factory default settings are restored, all the stored user BD data  
is deleted.  
English  
ꢃꢇ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix  
PROBLEM  
SOLUTION  
Forgot password  
Press the STOP (  
) button (on the front panel) for more than 5 seconds  
with no disc inside. All settings including the password will revert to the  
factory settings.  
Don't use this unless absolutely necessary.  
When the factory default settings are restored, all the user data stored in  
the BD data will be deleted.  
If you experience other problems.  
Go to the contents and find the section of the user manual that contains the  
explanations regarding the current problem, and follow the procedure once  
again.  
If the problem still cannot be solved, please contact your nearest Samsung  
authorized service center.  
The picture is noisy or distorted  
No HDMI output.  
Make sure that the disc is not dirty or scratched.  
Clean the disc.  
Check the connection between the TV and the HDMI jack of the player.  
Check if your TV supports 480p, 720p, 1080i or 1080p HDMI input resolution.  
Abnormal HDMI output screen.  
If random noise appears on the screen, it means that TV does not support  
HDCP (High-bandwidth Digital Content Protection).  
PC Share Manager function  
I can see folders shared through the PC  
Since Share Manager shows only Image, Music and Movie files, files that  
do not correspond to these categories are not be displayed.  
Share Manager, but I cannot see the files.  
AllShare function  
Video is played intermittently.  
Check if the network is stable.  
Check if the network cable is properly connected and if the network is not  
overloaded.  
Wireless connection between the server and the player is unstable.  
Check the connection.  
AllShare connection between TV and PC is  
unstable.  
IP addresses under the same sub-network should be unique, otherwise IP  
collision can occur as a result.  
Check if you have a firewall enabled.  
If so, disable the firewall function.  
ꢄ0  
English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PROBLEM  
BD-LIVE  
SOLUTION  
I cannot connect to the BD-LIVE server.  
Check whether the network connection is successful or not by using  
Network Test menu. (See page 42)  
Check whether a USB memory device is connected to player  
or not.  
The memory device must have at least 1GB of free space to accommodate  
the BD-LIVE service.  
You can check the available size in BD Data Management. (See page 37)  
Please check whether the BD-LIVE Internet Connection menu is set to  
Allow (All).  
If all above fails, contact the contents provider or update to the latest  
firmware.  
When using the BD-LIVE service, an error  
occurs.  
The memory device must have at least 1GB of free space to accommodate  
the BD-LIVE service.  
You can check the available size in BD Data Management. (See page 37)  
NOTE  
When the factory default settings are restored, all the stored user BD data is deleted.  
Viewing TV using 3D function  
Important safety Information. Read the following warnings before you or your child use the 3D function.  
The pregnant, elderly and epileptic and those suffering from a weak heart or serious carsickness are  
advised to avoid watching 3D pictures.  
We don’t recommend 3D pictures to those who are in bad physical condition, who are sleep-deprived  
or who drank liquor. Some 3D pictures may startle viewers.  
Do not place a sharp-edged or easily breaking object around you when playing a 3D video.  
If you feel and respond your body to the 3D video like it’s real, you can break the object around you or  
be physically damaged.  
Photosensitive Seizure Warning and Other Health Risks  
-
Some viewers may experience an epileptic seizure or stroke when exposed to certain flashing  
images or lights contained in certain television pictures or video games. If you or any of your relatives  
has a history of epilepsy or strokes, please consult with a medical specialist before using the 3D  
function.  
-
If you have any one of the following symptoms or conditions while watching 3D pictures, stop  
watching immediately and rest: dizziness, eye or facial instability, involuntary movement, cramps,  
clouded consciousness, mental disorder, disorientation or nausea. (If the symptom persists, please  
consult a medical specialist.)  
-
-
In particular, children or teenagers need parent care and guard when they watching the 3D video.  
Do not watch 3D pictures when you feel incoherent, sleepy, tired or sick. Avoid watching 3D pictures  
for long hours.  
English  
ꢄ1  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix  
Index  
J
T
A
JPEG  
51  
TV Aspect  
Title Menu  
Tools Menu  
32  
45  
Accessories  
Ad-hoc  
14  
28  
M
47~49  
Anynet+ (HDMI-CEC)  
Audio Language  
AllShare  
37  
48  
Movie Frame (24F)  
MP3  
34  
U
57~58  
50~51  
USB Storage Device  
52  
28, 40  
52  
B
N
W
BD Wise  
32  
37  
57  
49  
51  
Network Setup  
38~42  
32~33  
BD Data Management  
BD-LIVE  
Wireless Network  
O
BONUSVIEW  
Background Music  
Z
Optimal Resolution  
Zoom  
P
C
PCM Downsampling  
Popup Menu  
35  
46  
Component  
22  
27  
48  
Cable Network  
Camera Angle  
Picture Setting  
48~49  
R
D
Region Code  
Romote Control Sensor  
Romote Control  
Resolution  
13  
15  
Digital Output  
34~35  
36  
Dynamic Range Control  
Downmixing Mode  
DTS Neo:6  
18  
36  
32~33  
47, 50  
36  
Repeat  
DST (Daylight Saving Time) 38  
DivX  
38  
45  
45  
S
Disc Menu  
Disc Structure  
Supported File Format  
Software Upgrade  
Search and Skip  
Slow and Step  
12  
44, 57  
46  
H
46  
HDMI  
20, 36  
Subtitle Language  
Slide Show  
48  
HDMI Supported Amplifier 24  
51  
HDMI Deep Color  
34  
SAMSUNG PC Share  
Manager  
57~58  
I
Internet@TV  
37, 53  
29, 37  
Initial Settings  
ꢄꢀ  
English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
Weight  
1.8 Kg  
Dimensions  
430 (W) × 201 (D) × 42 (H) mm  
General  
Disc  
Operating Temperature Range  
Operating Humidity Range  
BD (Blu-ray Disc)  
+5°C to +35°C  
10 % to 75 %  
Reading Speed : 4.917m/sec  
Reading Speed : 3.49 ~ 4.06 m/sec.  
Approx. Play Time (Single Sided, Single Layer Disc) : 135 min.  
Reading Speed : 4.8 ~ 5.6 m/sec.  
Maximum Play Time : 74 min.  
Reading Speed : 4.8 ~ 5.6 m/sec.  
Maximum Play Time : 20 min.  
1 Channel : 1.0 Vp-p (75Ω load)  
Blu-ray/DVD Disc : 480i  
DVD (Digital Versatile Disc)  
CD : 12cm (COMPACT DISC)  
CD : 8cm (COMPACT DISC)  
Composite Video  
Y : 1.0 Vp-p (75Ω load)  
PR : 0.70 Vp-p (75Ω load)  
PB : 0.70 Vp-p (75Ω load)  
Blu-ray Disc : 1080i, 720p, 480p, 480i  
DVD : 480p, 480i  
Video Output  
Video/Audio  
Component Video  
HDMI  
2D : 1080p, 1080i, 720p, 480p  
3D : 1080p, 720p  
PCM multichannel audio, Bitstream audio  
2 Channel  
L(1/L), R(2/R)  
7.1 Channel  
F/L, F/R, R/L, R/R, C/T, S/W, SBR, SBL  
Digital Audio Output  
Optical  
48 kHz Sampling : 4 Hz to 22 kHz  
Audio Output  
*Frequency Response  
96 kHz Sampling : 4 Hz to 44 kHz  
*S/N Ratio  
*Dynamic Range  
*Total Harmonic Distortion  
110 dB  
100 dB  
0.003%  
*: Nominal specification  
-
-
-
Design and specifications are subject to change without prior notice.  
For the power supply and power consumption, refer to the label attached to the product.  
Weight and dimensions are approximate.  
English  
ꢄꢁ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix  
Compliance and Compatibility Notice  
NOT ALL discs are compatible  
Subject to the restrictions described below and those noted throughout this Manual, including the Disc  
Type and Characteristics section of this user manual, disc types that can be played are: pre-recorded  
commercial BD-ROM, DVD-VIDEO, and Audio CD (CD-DA) discs; BD-RE/-R, DVD-RW/-R discs; and  
CD-RW/-R discs.  
Discs other than the above cannot and/or is not intended to be played by this player. And some of the  
above discs may not play due to one or more reasons provided below.  
Samsung cannot assure that this player will play every disc bearing the BD-ROM, BD-RE/-R,  
DVD-VIDEO, DVD-RW/-R, DVD+RW/+ R and CD-RW/-R logos, and this player may not respond to  
all operating commands or operate all features of every disc. These and other disc compatibility and  
player operation issues with new and existing format discs are possible because:  
-
Blu-ray is a new and evolving format and this player may not operate all features of Blu-ray Discs  
because some features may be optional, additional features may have been added to the Blu-ray  
Disc format after the production of this player, and certain available features may be subject to  
delayed availability;  
-
-
-
not all new and existing disc format versions are supported by this player;  
new and existing disc formats may be revised, changed, updated, improved and/or supplemented;  
some discs are produced in a manner that allows specific or limited operation and feature during  
playback;  
-
-
some features may be optional, additional features may have been added after the production of this  
player or certain available features may be subject to delayed availability;  
some discs bearing the BD-ROM, BD-RE/-R, DVD-VIDEO, DVD-RW/-R, DVD+RW/+ R and  
CD-RW/-R logos may still be non-standardized discs;  
-
-
some discs may not be played depending on their physical state or recording conditions;  
problems and errors can occur during the creation of Blu-ray Disc, DVD software and/or the  
manufacture of discs;  
-
-
this player operates differently than a standard DVD player or other AV equipment; and/or  
for reasons noted throughout this user manual and for other reason(s) discovered and posted by  
SAMSUNG customer care center.  
If you encounter disc compatibility or player operation problems, please contact SAMSUNG customer care  
center.  
You may also contact SAMSUNG customer care center for possible updates on this player.  
For additional information on playback restrictions and disc compatibility, refer to the Precautions,  
Before Reading the user manual, Disc Types and Characteristics, and Before Playing sections of this  
user manual.  
Copy Protection  
Because AACS (Advanced Access Content System) is approved as content protection system for  
Blu-ray Disc format, similar to use of CSS (Content Scramble System) for DVD format, certain  
restrictions are imposed on playback, analog signal output, etc., of AACS protected contents.  
The operation of this product and restrictions on this product may vary depending on your time of  
purchase as those restrictions may be adopted and/or changed by AACS after the production of this  
product. Furthermore, BD-ROM Mark and BD+ are additionally used as content protection system for  
Blu-ray Disc format, which imposes certain restrictions including playback restrictions for BD-ROM  
Mark and/or BD+ protected contents. To obtain additional information on AACS, BD-ROM Mark, BD+,  
or this product, please contact SAMSUNG customer care center.  
ꢄꢂ  
English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Many Blu-ray Disc/DVD discs are encoded with copy protection. Because of this, you should only  
connect your Player directly to your TV, not to a VCR. Connecting to a VCR results in a distorted  
picture from copy-protected Blu-ray Disc/DVD discs.  
This product incorporates copyright protection technology that is protected by U.S. patents and other  
intellectual property rights. Use of this copyright protection technology must be authorized by Rovi  
Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized  
by Rovi Corporation. Reverse engineering or disassembly is prohibited.  
Under the U.S. Copyright laws and Copyright laws of other countries, unauthorized recording, use,  
display, distribution, or revision of television programs, videotapes, Blu-ray Discs, DVDs, and other  
materials may subject you to civil and/or criminal liability.  
For Blu-ray Disc Player progressive scan output : CONSUMERS SHOULD NOTE THAT NOT  
ALL HIGH DEFINITION TELEVISION SETS ARE FULLY COMPATIBLE WITH THIS PRODUCT AND  
MAY CAUSE ARTIFACTS TO BE DISPLAYED IN THE PICTURE. IN CASE OF PROGRESSIVE SCAN  
PICTURE PROBLEMS, IT IS RECOMMENDED THAT THE USER SWITCH THE CONNECTION TO  
THE ‘STANDARD DEFINITION’ OUTPUT. IF THERE ARE QUESTIONS REGARDING OUR TV SET  
COMPATIBILITY WITH THIS PRODUCT, PLEASE CONTACT OUR CUSTOMER SERVICE CENTER.  
Network Service Disclaimer  
All content and services accessible through this device belong to third parties and are protected by  
copyright, patent, trademark and/or other intellectual property laws. Such content and services are  
provided solely for your personal noncommercial use. You may not use any content or services in a  
manner that has not been authorized by the content owner or service provider. Without limiting the  
foregoing, unless expressly authorized by the applicable content owner or service provider, you may  
not modify, copy, republish, upload, post, transmit, translate, sell, create derivative works, exploit, or  
distribute in any manner or medium any content or services displayed through this device.  
THIRD PARTY CONTENT AND SERVICES ARE PROVIDED “AS IS.” SAMSUNG DOES NOT WARRANT  
CONTENT OR SERVICES SO PROVIDED, EITHER EXPRESSLY OR IMPLIEDLY, FOR ANY PURPOSE.  
SAMSUNG EXPRESSLY DISCLAIMS ANY IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED  
TO, WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. SAMSUNG  
DOES NOT GUARANTEE THE ACCURACY, VALIDITY, TIMELINESS, LEGALITY, OR COMPLETENESS  
OF ANY CONTENT OR SERVICE MADE AVAILABLE THROUGH THIS DEVICE AND UNDER NO  
CIRCUMSTANCES, INCLUDING NEGLIGENCE, SHALL SAMSUNG BE LIABLE, WHETHER IN  
CONTRACT OR TORT, FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUENTIAL  
DAMAGES, ATTORNEY FEES, EXPENSES, OR ANY OTHER DAMAGES ARISING OUT OF, OR IN  
CONNECTION WITH, ANY INFORMATION CONTAINED IN, OR AS A RESULT OF THE USE OF ANY  
CONTENT OR SERVICE BY YOU OR ANY THIRD PARTY, EVEN IF ADVISED OF THE POSSIBILITY OF  
SUCH DAMAGES.  
Third party services may be terminated or interrupted at any time, and Samsung makes no representation  
or warranty that any content or service will remain available for any period of time. Content and services  
are transmitted by third parties by means of networks and transmission facilities over which Samsung  
has no control. Without limiting the generality of this disclaimer, Samsung expressly disclaims any  
responsibility or liability for any interruption or suspension of any content or service made available  
through this device.  
Samsung is neither responsible nor liable for customer service related to the content and services.  
Any question or request for service relating to the content or services should be made directly to the  
respective content and service providers.  
English  
ꢄꢃ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix  
License  
Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol  
are trademarks of Dolby Laboratories.  
Manufactured under license under U.S. Patent #’s: 5,451,942; 5,956,674; 5,974,380;  
5,978,762; 6,226,616; 6,487,535; 7,212,872; 7,333,929; 7,392,195; 7,272,567  
& other U.S. and worldwide patents issued & pending. DTS and the Symbol are  
registered trademarks, & DTS-HD, DTS-HD Master Audio, and the DTS logos are  
trademarks of DTS, Inc. Product includes software. © DTS, Inc. All Rights Reserved.  
®
ABOUT DIVX VIDEO: DivX is a digital video format created by DivX,Inc. This is an official  
software tools to convert your files into DivX video.  
®
ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified device must be registered in order to play DivX  
Video-on-Demand (VOD) content. To generate the registration code, locate the DivX VOD section in  
the device setup menu. Go to vod.divx.com with this code to complete the registration process and  
learn more about DivX VOD.  
DivX Certified to play DivX video up to HD 1080p, including premium content.  
The product unit accompanying this user manual is licensed under certain intellectual property rights of  
certain third parties. This product is covered by one or more of the following U.S. patents : 5,060,220  
5,457,669 5,561,649 5,705,762 6,043,912 6,438,099 6,467,061 6,556,521 6,578,163 6,697,307  
6,728,474 6,771,891 6,894,963 6,895,593 6,937,815 6,996,327 7,009,926 7,085,221 7,088,649  
7,092,327 7,099,566 7,123,564 7,142,493 7,142,495 7,145,861 7,146,624 7,151,729 7,161,879  
7,164,647 7,167,437 7,173,891 7,177,250 7,194,187 7,203,891 7,209,423 7,210,067 7,228,062  
7,245,566 7,245,567 7,257,065 7,263,045 7,269,110 7,272,086 7,272,106 7,280,460 7,283,729  
7,286,454 7,304,938  
This license is limited to private non-commercial use by end-user consumers for licensed contents.  
No rights are granted for commercial use. The license does not cover any product unit other than this  
product unit and the license does not extend to any unlicensed product unit or process conforming to  
ISO/IEC 11172-3 or ISO/IEC 13818-3 used or sold in combination with this product unit.  
The license only covers the use of this product unit to encode and/or decode audio files conforming to  
the ISO/IEC 11172-3 or ISO/IEC 13818-3. No rights are granted under this license for product features  
or functions that do not conform to the ISO/IEC 11172-3 or ISO/IEC 13818-3.  
Open Source License Notice  
-
In the case of using open source software, Open Source Licenses are available on the product menu.  
ꢄꢄ  
English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Contact SAMSUNG WORLD WIDE  
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG  
customer care center.  
Area  
` North America  
Canada  
Contact Center  
Web Site  
Area  
Switzerland  
Contact Center   
Web Site  
ch_fr/ (French)  
0848 - SAMSUNG (7267864,  
1-800-SAMSUNG (726-7864) www.samsung.com  
01-800-SAMSUNG (726-7864) www.samsung.com  
1-800-SAMSUNG (726-7864) www.samsung.com  
CHF 0.08/min)  
Mexico  
Lithuania  
Latvia  
8-800-77777  
8000-7267  
800-7267  
U.S.A  
` Latin America  
Estonia  
Argentine  
0800-333-3733  
` CIS  
0800-124-421  
Brazil  
Chile  
Russia  
8-800-555-55-55  
8-800-555-555  
4004-0000  
Georgia  
800-SAMSUNG (726-7864)  
00-1800-5077267  
800-7919267  
Armenia  
Azerbaijan  
Kazakhstan  
Uzbekistan  
Kyrgyzstan  
Tadjikistan  
0-800-05-555  
Nicaragua  
Honduras  
Costa Rica  
Ecuador  
088-55-55-555  
8-10-800-500-55-500  
8-10-800-500-55-500  
00-800-500-55-500  
8-10-800-500-55-500  
0-800-507-7267  
1-800-10-7267  
800-6225  
El Salvador  
Guatemala  
Jamaica  
1-800-299-0013  
1-800-234-7267  
800-7267  
ua_ru  
Ukraine  
0-800-502-000  
Panama  
Puerto Rico  
1-800-682-3180  
Belarus  
810-800-500-55-500  
00-800-500-55-500  
Rep. Dominica 1-800-751-2676  
Moldova  
Trinidad &  
` Asia Pacific  
1-800-SAMSUNG (726-7864) www.samsung.com  
Tobago  
Australia  
1300 362 603  
Venezuela  
Colombia  
` Europe  
0-800-100-5303  
New Zealand  
0800 SAMSUNG (0800 726 786) www.samsung.com  
01-8000112112  
400-810-5858  
China  
010-6475 1880  
0810 - SAMSUNG  
Austria  
Belgium  
Czech  
(7267864, € 0.07/min)  
hk  
(852) 3698-4698  
Hong Kong  
hk_en/  
be (Dutch)  
02-201-24-18  
be_fr (French)  
3030 8282  
1800 110011  
India  
1800 3000 8282  
800 - SAMSUNG  
(800-726786)  
1800 266 8282  
0800-112-8888  
021-5699-7777  
Indonesia  
Denmark  
Finland  
France  
70 70 19 70  
030 - 6227 515  
01 48 63 00 00  
Japan  
0120-327-527  
1800-88-9999  
Malaysia  
01805 - SAMSUNG  
1-800-10-SAMSUNG  
Germany  
(726-7864 € 0,14/Min)  
(726-7864)  
1-800-3-SAMSUNG  
(726-7864)  
Hungary  
06-80-SAMSUNG (726-7864) www.samsung.com  
Philippines  
Italia  
800-SAMSUNG (726-7864)  
261 03 710  
1-800-8-SAMSUNG  
(726-7864)  
Luxemburg  
02-5805777  
0900-SAMSUNG  
Singapore  
Thailand  
1800-SAMSUNG (726-7864) www.samsung.com  
Netherlands  
Norway  
Poland  
(0900-7267864) (€ 0,10/Min)  
1800-29-3232  
02-689-3232  
815-56 480  
0 801 1SAMSUNG (172678)  
Taiwan  
0800-329-999  
1 800 588 889  
022-607-93-33  
Vietnam  
Portugal  
80820-SAMSUNG (726-7864) www.samsung.com  
` Middle East & Africa  
Slovakia  
0800-SAMSUNG (726-7864) www.samsung.com  
Turkey  
444 77 11  
902 - 1 - SAMSUNG  
(902 172 678)  
Spain  
South Africa  
U.A.E  
0860-SAMSUNG (726-7864) www.samsung.com  
800-SAMSUNG (726-7864)  
8000-4726  
Sweden  
0771 726 7864 (SAMSUNG) www.samsung.com  
Bahrain  
Jordan  
U.K  
0845 SAMSUNG (7267864)  
0818 717100  
800-22273  
Eire  
Download from Www.Somanuals.com. All Manuals Search And Download.  
AK68-01942N  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Radio Shack Flat Panel Television P20LCDD User Guide
Ricoh Digital Camera L753 2911 User Guide
Rinnai Electric Heater RCE 329A User Guide
Roland Electronic Keyboard HP505 User Guide
Samsung Flat Panel Television K 400 User Guide
Samsung Heat Pump NH080PHXEA User Guide
Samsung Telephone ITP 5021D User Guide
Sanyo Home Theater Screen VM 6614 User Guide
Seiko Watch CAL 6R20 User Guide
Senco Nail Gun PalletPro 57F User Guide