Samsung Blu ray Player 51CH User Guide

HT-F4500

HT-F4530

5.1CH Blu-ray™

Home Entertainment System

user manual

imagine the possibilities

Thank you for purchasing this Samsung product.

To receive more complete service,

please register your product at

www.samsung.com/register

Download from Www.Somanuals.com. All Manuals Search And Download.

Precautions

Disc Storage & Management

• Holding Discs

Important Safety Instructions

Fingerprints or scratches on

a disc may reduce sound and picture

quality or cause skipping.

Read these operating instructions carefully before using

the unit. Follow all the safety instructions listed below.

Keep these operating instructions handy for future

reference.

Avoid touching the surface of a disc where data has

been recorded.

Hold the disc by the edges so that fingerprints will

not get on the surface.

Read these instructions.

Keep these instructions.

Do not stick paper or tape on the disc.

Heed all warnings.

• Cleaning Discs

Follow all instructions.

If you get fingerprints or dirt on a disc,

Do not use this apparatus near water.

clean it with a mild detergent diluted in

water and wipe with a soft cloth.

Clean only with a dry cloth.

When cleaning, wipe gently from the

inside to the outside of the disc.

Do not block any ventilation openings. Install in

accordance with the manufacturer’s instructions.

Disc Storage

Do not install near any heat sources such as

 Do not keep in direct sunlight.

 Keep in a cool ventilated area.

radiators, heat registers, stoves, or other apparatus

(including AV receivers) that produce heat.

 Keep in a clean protection jacket and store

Do not defeat the safety purpose of the polarized

vertically.

or grounding-type plug. A polarized plug has two

blades with one wider than the other. A grounding

type plug has two blades and a third grounding

prong. The wide blade or the third prong are

provided for your safety. If the provided plug does

not fit into your outlet, consult an electrician for

replacement of the obsolete outlet.

Handling Cautions

• Do not expose this apparatus to dripping or splashing.

Do not put objects filled with liquids, such as vases, on

the apparatus.

• To turn this apparatus off completely, you must pull the

power plug out of the wall socket. Consequently, the

power plug must be easily and readily accessible at all

times.

Protect the power cord from being walked on

10.

or pinched particularly at plugs, convenience

receptacles, and the point where it exits the

apparatus.

• Do not touch the power plug with a wet hand.

It can cause an electric shock.

Only use attachments/accessories specified by the

11.

12.

manufacturer.

• Do not plug multiple electric devices into the same wall

socket. Overloading a socket can cause it to overheat,

resulting in a fire.

Use only with the cart, stand,

tripod, bracket, or table

specified by the manufacturer,

or sold with the apparatus.

When a cart is used, use

caution when moving the cart/

apparatus combination to avoid

injury from tip-over.

• Before connecting other components to this product,

be sure to turn them off.

• If you move your product suddenly from a cold place

to a warm place, condensation may occur on the

operating parts and lens and cause abnormal disc

playback. If this occurs, unplug the product, wait for

two hours, and then connect the plug to the power

outlet. Then, insert the disc, and try to play back again.

Unplug this apparatus during lightning storms or

13.

14.

when unused for long periods of time.

Refer all servicing to qualified service personnel.

Servicing is required when the apparatus has been

damaged in any way, such as when the power-

supply cord or plug is damaged, liquid has been

spilled or objects have fallen into the apparatus, the

apparatus has been exposed to rain or moisture,

does not operate normally, or has been dropped.

• If the product makes an abnormal noise or produces

a burning smell or smoke, turn off the power switch

immediately and disconnect the power plug from

the wall outlet. Then, contact the nearest customer

service center for technical assistance. Do not use the

product. Using the product as it is may cause a fire or

an electric shock.

English

Download from Www.Somanuals.com. All Manuals Search And Download.

Safety Information

• To turn this apparatus off completely, you must pull the

power plug out of the wall socket. Consequently, the

power plug must be easily and readily accessible at all

times.

This product uses Cinavia technology to limit the

use of unauthorized copies of some commercially-

produced film and videos and their soundtracks. When

a prohibited use of an unauthorized copy is detected, a

message will be displayed and playback or copying will

be interrupted.

License

More information about Cinavia technology is provided

at the Cinavia Online Consumer Information Center

at http://www.cinavia.com. To request additional

information about Cinavia by mail, send a postcard with

your mailing address to: Cinavia Consumer Information

Center, P.O. Box 86851, San Diego, CA, 92138, USA.”

This product incorporates proprietary technology

under license from Verance Corporation and is

protected by U.S. Patent 7,369,677 and other U.S.

and worldwide patents issued and pending as well

as copyright and trade secret protection for certain

aspects of such technology. Cinavia is a trademark of

engineering or disassembly is prohibited.

Manufactured under license

from Dolby Laboratories.

Dolby, Pro Logic, and

the double-D symbol are

trademarks of Dolby Laboratories.

Manufactured

under license under

U.S. Patent Nos:

5,956,674; 5,974,380;

6,226,616; 6,487,535; 7,392,195; 7,272,567;

7,333,929; 7,212,872 & other U.S. and worldwide

patents issued & pending. DTS-HD, the Symbol,

& DTS-HD and the Symbol together are registered

trademarks & DTS-HD Master Audio | Essential is a

trademark of DTS, Inc. Product includes software.

- Open Source License Notice

In the case of using open source software, Open

Source Licenses are available on the product menu.

The terms HDMI and HDMI

High-Definition Multimedia

Using the 3D Function

Interface, and the HDMI

IMPORTANT HEALTH AND SAFETY INFORMATION FOR

3D PICTURES.

Logo are trademarks or registered trademarks of

HDMI Licensing LLC in the United States and other

countries.

Read and understand the following safety information

before using the 3D function.

• Some viewers may experience discomfort while viewing

3D TV such as dizziness, nausea, and headaches.

If you experience any such symptom, stop viewing 3D

TV, remove the 3D Active Glasses, and rest.

DLNA®, the DLNA Logo

and DLNA CERTIFIED® are

trademarks, service marks,

or certification marks of the Digital Living Network

Alliance.

• Watching 3D images for an extended period of time

may cause eye strain. If you feel eye strain, stop

viewing 3D TV, remove your 3D Active Glasses, and

rest.

Oracle and Java are registered trademarks

of Oracle and/or its affiliates. Other names

may be trademarks of their respective

owners.

• A responsible adult should frequently check on children

who are using the 3D function.

If there are any reports of tired eyes, headaches,

dizziness, or nausea, have the child stop viewing 3D

TV and rest.

This item incorporates copy protection technology

that is protected by U.S. patents and other intellectual

property rights of Rovi Corporation. Reverse engineering

and disassembly are prohibited.

• Do not use the 3D Active Glasses for other purposes

(such as general eyeglasses, sunglasses, protective

goggles, etc.)

• Do not use the 3D function or 3D Active Glasses while

walking or moving around. Using the 3D function or 3D

Active Glasses while moving around may cause you to

bump into objects, trip, and/or fall, and cause serious

injury.

Blu-ray Disc™, Blu-ray™, and the logos are trademarks

of Blu-ray Disc Association.

English

Download from Www.Somanuals.com. All Manuals Search And Download.

• If you want to enjoy 3D content, connect a 3D device

(3D compliant AV receiver or TV) to the product’s HDMI

OUT port using a high-speed HDMI cable. Put on 3D

glasses before playing the 3D content.

GETTING STARTED

Disk and Format Compatibility

Logos of Discs the product can play

Accessories

• The product outputs 3D signals only through HDMI

cable connected to the HDMI OUT port.

10 Front Panel

• As the video resolution in 3D play mode is fixed

according to the resolution of the original 3D video, you

can not change the resolution to your preference.

10 Rear Panel

11 Remote Control

• Some functions such as BD Wise, screen size

adjustment, and resolution adjustment may not operate

properly in 3D play mode.

CONNECTIONS

12 Connecting the Speakers

• You must use a high-speed HDMI cable for proper

output of the 3D signal.

14 Connecting to a Network Router

15 Connecting to TV/External Devices

• Stay at least three times the width of the screen from

the TV when watching 3D images. For example, if you

have a 46 inch screen, stay 138 inches (11.5 feet) from

the screen.

SETTINGS

16 The Initial Settings Procedure

17 The Home Screen

Place the 3D video screen at eye level for the best

3D picture.

17 Accessing the Settings Screen

18 Settings Menu Functions

20 Networks and the Internet

21 Upgrading Software

• When the product is connected to some 3D devices,

the 3D effect may not function properly.

• This product does not convert 2D content into 3D.

• “Blu-ray 3D” and “Blu-ray 3D” logo are trademarks of

the Blu-ray Disc Association.

22 Setting Up DLNA

MEDIA PLAY

23 Playing Files on a USB Device

23 Playing a Disc with User Recorded Content

24 Playing a Commercial Video Disc

24 Controlling Video Playback

may be reproduced or copied without the prior written

permission of Samsung Electronics Co.,Ltd.

25 Playing a Pre-Recorded Commercial Audio Disc

26 Controlling Music Playback

26 Controlling Photo Playback

27 Listening to Radio

27 Using the TV SOUND Button on the Remote

Control

NETWORK SERVICES

28 Using BD-LIVE™

Contents

28 Using DLNA

APPENDIX

SAFETY INFORMATION

29 Additional Information

32 Troubleshooting

35 Specifications

Warning

Precautions

Disc Storage & Management

Handling Cautions

License

Using the 3D Function

English

Download from Www.Somanuals.com. All Manuals Search And Download.

Getting Started

Disk and Format Compatibility

Disc Types and Contents Your Product Can Play

Media

VIDEO

Disc Type

Details

Blu-ray Disc

BD-ROM or BD-RE/-R disc recorded in the BD-RE format.

3D Blu-ray Disc

DVD-VIDEO, DVD-RW,

DVD-R, DVD+RW,

DVD+R

DVD-VIDEO, recorded DVD+RW/DVD-RW(V)/DVD-R/+R discs that have

been recorded and finalized, or a USB storage media containing MKV,

MP4 contents.

CD-RW/-R,

Music recorded on CD-RW/-R, DVD-RW/-R, BD-RE/-R discs or a USB

storage media containing MP3 or WMA contents.

DVD-RW/-R,

MUSIC

PHOTO

BD-RE/-R

CD-RW/-R,

Photos recorded on CD-RW/-R, DVD-RW/-R, BD-RE/-R discs or a USB

storage media containing JPEG contents.

DVD-RW/-R,

BD-RE/-R

| NOTES |

The product may not play certain CD-RW/-R and DVD-R because of the disc type or recording conditions.

If a DVD-RW/-R disc has not been recorded properly in DVD video format, it will not be playable.

Your product will not play content that has been recorded on a DVD-R at a bitrate that exceeds 10 Mbps.

Your product will not play content that has been recorded on a BD-R or USB device at a bitrate that exceeds 30

Mbps.

Playback may not work for some types of discs, or when you use specific operations, such as angle change

and aspect ratio adjustment. Information about the discs is written in detail on the disc box. Please refer to this if

necessary.

When you play a BD-J title, loading may take longer than a normal title or some functions may perform slowly.

Disc Types Your Product Cannot Play

• HD DVD

• DVD-RAM

• DVD-RW(VR mode)

• 3.9 GB DVD-R Disc for

Authoring.

• DVD-ROM/PD/MV-Disc, • Super Audio CD

• CVD/CD-ROM/CDV/

CD-G/CD-I/LD

etc

(except CD layer)

(CD-Gs play audio only,

not graphics.)

| NOTES |

This product may not respond to all operating commands because some Blu-ray Disc, DVD, and CD discs allow

specific or limited operation and provide only certain features during playback.

Please note that this is not a defect in the product.

Samsung cannot guarantee that this product will play every disc bearing the Blu-ray Disc, DVD or CD logo because

disc formats evolve, and problems and errors may occur during the creation of Blu-ray Disc, DVD, and CD software

and/or the manufacture of discs.

Please contact the SAMSUNG Customer Care Center at 1-800-726-7864 if you have questions or encounter

difficulty when playing Blu-ray Disc, DVD, or CD discs in this product. Also, refer to rest of this user manual for

additional information on playback restrictions.

Some commercial discs and DVD discs purchased outside your region may not play on this product.

English

Download from Www.Somanuals.com. All Manuals Search And Download.

Region Code

Logos of Discs the product can play

Both products and discs are coded by region. These

regional codes must match for a disc to play. If the codes

do not match, the disc will not play.

The Region Number for this product is displayed on the

rear panel of the product.

Blu-ray Disc

Dolby

BD-LIVE

DTS

Region

Disc Type

Area

Code

North America, Central

America, South America,

Korea, Japan, Taiwan, Hong

Kong and South East Asia.

Blu-ray Disc

Europe, Greenland, French

territories, Middle East, Africa,

Australia and New Zealand.

India, China, Russia, Central

and South Asia.

3D Blu-ray Disc

Java

The U.S., U.S. territories and

Canada

Europe, Japan, the Middle

East, Egypt, Africa, Greenland

NTSC broadcast system

in U.S.A, Canada, Korea,

Japan

Taiwan, Korea, the Philippines,

Indonesia, Hong Kong

Mexico, South America,

Central America, Australia,

New Zealand, Pacific Islands,

Caribbean

DVD-VIDEO

| NOTES |

Supported Formats

Music File Support

Russia, Eastern Europe, India,

North Korea, Mongolia

File

Audio

Container

Support Range

Extension

Codec

*.mp3

MP3

China

* Sampling rates

(in kHz) - 8, 11, 16,

22, 32, 44.1, 48

*.wma

WMA

If the Region number of a Blu-ray Disc/DVDs does not

correspond to the Region number of this product, the

product cannot play the disc.

* Bitrates - All

bitrates from 5kbps

to 384kbps

English

Download from Www.Somanuals.com. All Manuals Search And Download.

Getting Started

Picture File Support

File Extension

Type

JPEG

PNG

Resolution

*.jpg

*.jpeg

*.jpe

15360x8640

*.png

Video File Support

File Extension

Container

Video Codec

Audio Codec

Resolution

MP3, Dolby Digital, DTS,

WMA, PCM

MP4v3

*.avi

AVI

H.264 BP/MP/HP

VC-1 AP

*.mkv

*.wmv

*.mp4

MP3, Dolby Digital, DTS

MKV

H.264 BP/MP/HP

VC-1 AP

WMV

WMA

AAC

(wmv9)

1920x1080

VC-1 SM

MP4 (mp4v)

MP4

H.264 BP/MP/HP

MPEG1

*.mpg

MP1, 2

MPEG2

*.mpeg

Dolby Digital, DTS

H.264 BP/MP/HP

 Limitations

Even when a file is encoded by a supported codec listed above, the file might not be played if its content has a

problem.

Normal playback is not guaranteed if the file’s container information is wrong or the file itself is corrupted.

Files having a higher bitrate/frame rate than standard may stutter during sound/video playback.

The Seek (skip) function is not available if the file’s index table is damaged.

 Video decoder

Supports up to H.264 Level 4.1 and AVCHD

Does not support H.264 FMO/ASO/RS and VC1 SP/MP/AP L4

MPEG4 SP, ASP :

Below 1280 x 720 : 60 frames max

Above 1280 x 720 : 30 frames max

Does not support GMC 2 or higher

 Audio decoder

Supports WMA 7, 8, 9 and STD

Does not support WMA sampling rate of 22050Hz mono.

AAC: Max sampling rate: 96Khz (8, 11, 12, 16, 22,24, 32,44.1, 48, 64, 88.2, 96) Max bitrate: 320kbps

AVCHD (Advanced Video Codec High Definition)

• This product can play back AVCHD format discs. These discs are normally recorded and used in camcorders.

• The AVCHD format is a high definition digital video camera format.

• The MPEG-4 AVC/H.264 format compresses images with greater efficiency than the conventional image compressing

format.

• Some AVCHD discs use the “x.v.Color” format. This product can play back AVCHD discs that use “x.v.Color” format.

English

Download from Www.Somanuals.com. All Manuals Search And Download.

• “x.v.Color” is a trademark of Sony Corporation.

• “AVCHD” and the AVCHD logo are trademarks of Matsushita Electronic Industrial Co., Ltd. and Sony Corporation.

| NOTES |

Some AVCHD format discs may not play, depending on the recording conditions.

AVCHD format discs need to be finalized.

“x.v.Color” offers a wider color range than normal DVD camcorder discs.

Some MKV and MP4 format discs may not play, depending on their video resolution and frame rate.

Notes on the USB connection

• Your product supports USB storage media, MP3 players, digital cameras, and USB card readers.

• The product does not support folder or file names longer than 128 characters.

• Some USB/External HDD/digital camera devices may not be compatible with the product.

• Your product supports the FAT 16, FAT 32, and NTFS files systems.

• Connect USB devices directly to the product’s USB port. Connecting through a USB cable may cause compatibility

problems.

• Inserting more than one memory device into a multi-card reader may cause the reader to operate improperly.

• The product does not support the PTP protocol.

• Do not disconnect a USB device during a “loading” process.

• The bigger the image resolution, the longer the image takes to display.

• This product cannot play MP3 files with DRM (Digital Rights Management) downloaded from commercial sites.

• Your product only supports video that is under 30fps (frame rate).

• You must remove the USB storage device safely (by performing the “Safely Remove USB” function) to prevent

possible damage to the USB memory.

Press the HOME button to move to the home menu, press the YELLOW (C) button, and then press the E button.

• SAMSUNG is not responsible for any data file damage or data loss.

Accessories

Check for the supplied accessories below.

FUNCTION

MUTE

SUBTITLE

HOME

REPEAT

TOOLS

INFO

EXIT

RETURN

TUNER

TV SOUND DSP/EQ

DOWN

Power Cable

User Manual

FM Antenna

Remote Control /Batteries (AAA size)

 Figures and illustrations in this User Manual are provided for reference only and may differ from actual

product appearance.

 An administration fee may be charged if either

a. an engineer is called out at your request and there is no defect in the product (i.e. where you have failed

to read this user manual)

b. you bring the unit to a repair center and there is no defect in the product (i.e. where you have failed to

read this user manual).

 The amount of such administration charge will be advised to you before any work or home visit is carried

out.

English

Download from Www.Somanuals.com. All Manuals Search And Download.

Getting Started

Front Panel

PLAY/PAUSE

ENTER

STOP

OPEN/CLOSE

VOLUME CONTROL

FUNCTION

5V 500mA

DISPLAY

DISC TRAY

USB HOST

POWER

REMOTE CONTROL

SENSOR

| NOTES |

To upgrade the product's software through the USB Host jack, you must use a USB memory stick.

When the product displays the Blu-ray Disc menu, you cannot start the movie by pressing the 6 button on the

product or the remote. To play the movie, you must select Play Movie or Start in the disc menu, and then press the

E button.

If you use the Internet service or play the USB device contents on the TV, you cannot select the BD/DVD mode with

the FUNCTION button. Stop the playing contents on the TV first to select the BD/DVD mode.

Rear Panel

COOLING FAN

AUX IN

*FM ANT

HDMI OUT

AUX

FM ANT

SURROUND

FRONT

SURROUND

FRONT

POWER

SUBWOOFER

CENTER

OPTICAL

DIGITAL

SPEAKERS OUT

HDMI OUT

LAN

AUDIO IN

POWER CORD

SPEAKER OUTPUT EXTERNAL DIGITAL AUDIO

LAN

CONNECTORS

IN (OPTICAL)

* Connecting the FM Antenna

Connect the FM antenna supplied to the FM ANTENNA Jack.

Slowly move the antenna wire around until you find a location where reception is good, then fasten it to a wall or

other rigid surface.

| NOTES |

Ensure a minimum of 4 inches of clear space on all sides of the home theater to ensure adequate ventilation.

Do not obstruct the cooling fan or ventilation holes.

This product does not receive AM broadcasts.

English

Download from Www.Somanuals.com. All Manuals Search And Download.

Remote Control

Tour of the Remote Control

Turn the product on and off.

Press to select Blu-ray's mode.

(BD/DVD, D. IN, AUX, etc.).

FUNCTION

MUTE

To open and close the disc tray.

VOLUME

Adjust the volume.

Cut off the sound temporarily.

Press numeric buttons to operate

options.

DISC MENU

TITLE MENU

Use to enter the Popup menu/

Title menu.

Press to view the disc menu.

POPUP

Press to skip backwards or forwards.

Press to play a disc.

Press to search backwards or

forwards.

Press to pause a disc.

Press to stop a disc.

SUBTITLE

HOME

REPEAT

Allows you to repeat a title,

chapter, track or disc.

Selects the disc subtitle language.

Press to move to the Home screen.

TOOLS

INFO

Use to display the playback

information when playing

a Blu-ray/DVD disc.

Press to use the Tools menu.

Select on-screen menu items and

change menu value.

RETURN

EXIT

Press to exit the menu.

Use to set a preset radio frequency.

Return to the previous menu.

TUNER

MEMORY MO/ST

These buttons are used both for

menus on the product and also

several Blu-ray Disc functions.

TV SOUND DSP/EQ

TUNING

Select MONO or STEREO for radio

broadcasts.

DOWN

Audio signal can output to home

theater speaker or TV speaker.

(See page 27)

Search for active FM stations and to

change channels.

Select the desired DSP/EQ audio

mode.

Installing batteries in the Remote Control

Make sure to match the “+” and “–” ends of the batteries with the

diagram inside the compartment.

Battery size: AAA

Assuming typical TV usage, the batteries last for about one year.

The remote control can be used up to approximately 23 feet

(7 meters) from the product in a straight line.

English

Download from Www.Somanuals.com. All Manuals Search And Download.

Connections

This section describes various methods of connecting the product to other external components.

Before moving or installing the product, be sure to turn off the power and disconnect the power cord.

Connecting the Speakers

Position of the product

under the TV stand.

Place it on a stand or cabinet shelf, or

Center

Subwoofer

Selecting the Listening Position

Front (R)

The listening position should be located

about 2.5 to 3 times the size of the TV's

screen from the TV. For example, if you

have a 46 inch screen, locate the listening

position 115 to 138 inches (9.6 to11.5

feet) from the screen.

Surround (R)

Product

Front (L)

Surround (L)

Place these speakers in front of your listening position, facing inwards (about 45°) toward

you. Place the front speakers so that their tweeters will be at the same height as your ear.

Align the front face of the front speakers with the front face of the center speaker or place

them slightly in front of the center speakers.

Front Speakers

Center Speaker

It is best to install the Center Speaker at the same height as the front speakers. You can

also install it directly over or under the TV.

Place these speakers to the side of your listening position. If there isn't enough room, place

these speakers so they face each other. Position them about 2 to 3 feet (60 to 90cm) above

your ear, facing slightly downward.

Surround

Speakers

* Unlike the front and center speakers, the surround speakers are used mainly for sound

effects. Sound will not come from them all the time.

Subwoofer

The position of the subwoofer is not so critical. Place it anywhere you like.

Speaker Components

HT-F4500

(L)

(R)

(L)

(R)

FRONT

SURROUND

CENTER

SUBWOOFER

SPEAKER CABLE

English

Download from Www.Somanuals.com. All Manuals Search And Download.

HT-F4530

(L) (R)

SCREW (5x20): 8EA

SPEAKER CABLE

STAND BASE

CENTER

(L) (R)

SURROUND

FRONT

STAND

SUBWOOFER

Installing the Speakers on the Tallboy Stand

* HT-F4530 only - Front Speakers

Stand Base

Turn the Stand Base upside-down and connect it to the Stand.

Use the driver to combine the screws on the 3 marked holes.

Stand

Straighten a supplied speaker wire to the gravity direction and

put in the hole on the center of Stand Base.

Connect the upper Speaker to the assembled Stand.

Speaker

Stand

Insert a screw clockwise into the hole on the rear of the speaker

using a screwdriver.

And then connect a speaker cable.

This is the appearance after the speaker is installed.

Follow this steps to install other speaker.

Connecting The Speakers

Match each speaker cable bundle to the correct speaker by matching the color

coded plug on each bundle to the colored sticker on the bottom of each speaker.

To attach speaker wire to each speaker:

a. Press down the red tab on the back of the speaker, insert the red wire, and then

release the tab.

Red

Black

b. Press down the black tab on the back of the speaker, insert the black wire, and

then release the tab.

Connect the speaker wire plugs from each speaker to the back of the product by

matching the colors of the speaker plugs to the colors of the speaker jacks.

English

Download from Www.Somanuals.com. All Manuals Search And Download.

Connections

In case of HT-F4500

Surround Speaker (R)

Surround Speaker (L)

SURROUND

FRONT

SURROUND

FRONT

Front Speaker (R)

Front Speaker (L)

Center Speaker

SUBWOOFER

CENTER

SPEAKERS OUT

Subwoofer

AUX

FM ANT

SURROUND

FRONT

SURROUND

FRONT

SUBWOOFER

CENTER

OPTICAL

SPEAKERS OUT

DIGITAL

AUDIO IN

Refer to page 13 for the speakers of HT-F4530.

| CAUTION |

If you want to install the speakers on the wall, fasten screws or nails (not provided) firmly to the wall wherever you

want to hang a speaker, and then, using the hole in the rear of each speaker, carefully hang each speaker on a screw

or nail.

Do not let children play with or near the speakers. They could get hurt if a speaker falls.

When connecting the speaker wires to the speakers, make sure that the polarity (+/ –) is correct.

Keep the subwoofer speaker out of reach of children to prevent children from inserting their hands or alien

substances into the duct (hole) of the subwoofer speaker.

Do not hang the subwoofer on the wall through the duct (hole).

| NOTES |

If you place a speaker near your TV set, the screen color may be distorted because of the magnetic field.

Connecting to a Network Router

AUX

POWER

SURROUND

FRONT

SUBWOOFER

CENTER

OPTICAL

SPEAKERS OUT

DIGITAL

HDMI OUT

LAN

Broadband

modem

Broadband

service

Broadband

service

Broadband modem (with integrated router)

Router

| NOTES |

Your router or your Internet Service Provider's policies may prevent the product from accessing Samsung's software

update server. If this occurs, contact your Internet Service Provider (ISP) for more information.

DSL users, please use a router to make a network connection.

To use the DLNA function, you must connect a PC to the network as shown in the figure. The connection can be

wired or wireless.

English

Download from Www.Somanuals.com. All Manuals Search And Download.

Connecting to TV/External Devices

AUX

FM ANT

AUX

POWER

SURROUND

FRONT

SURROUND

FRONT

SUBWOOFER

CENTER

OPTICAL

SPEAKERS OUT

DIGITAL

HDMI OUT

LAN

OPTICAL

DIGITAL

HDMI OUT

LAN

AUDIO IN

Method 1

Method 2

Red

External Devices

White

HDMI IN

OPTICAL OUT

Connecting to a TV

Connect an HDMI cable (not supplied) from the HDMI OUT jack on the back of the product to the HDMI IN jack on

your TV. If the TV supports ARC, you can hear the audio from your TV through the home theater with only this cable

^cC^ooⁿⁿn^en^cte^edc^.t^Sin^eeg^pt^ao^geE¹x⁹tⁱⁿe^tr^hn^isa^ml^aD^nue^av^{l a}ic^nde^ts^{he section on ARC in your TV's user's manual for details.}

To select the correct mode for an external device after you have connected the device, press the FUNCTION button.

Each time you press the button, the mode changes in this order : BD/DVD D. IN AUX FM

ꢀ

Two methods of connecting external devices to your home theater are explained below.

Method 1 AUX IN : Connecting an External Analog Component

Using an RCA audio cable (not supplied), connect the AUDIO In jack on the product to the AUDIO Out jack on the

external analog component.  Select the AUX mode.

• Be sure to match the colors on the cable plugs to the colors on the input and output jacks.

Method 2 OPTICAL : Connecting an External Digital Audio Component

Use to connect the digital audio output of digital signal components such as Cable Boxes and Satellite Receivers (Set-

Top-Boxes).

Using a digital optical cable (not supplied), connect the Optical Digital Audio In jack on the product to the Digital Optical

Out jack of the external digital device using a digital optical cable.

 Select the D. IN mode.

| NOTES |

To see video from your Cable Box/Satellite receiver, you must connect its video output directly to your TV.

This system supports Digital sampling frequencies of 32 kHz or higher from external digital components.

This system supports only DTS and Dolby Digital audio. MPEG audio, a bitstream format, is not supported.

English

Download from Www.Somanuals.com. All Manuals Search And Download.

Settings

The Network - Wired screen appears.

5 .

The Initial Settings Procedure

If you have a network with dynamic IP addresses

- and most people do - select Auto, press the

E button, and then go to Step 6.

• The Home menu will not appear if you do not

If you have a network with static IP addresses,

we suggest you select Skip by pressing the

BLUE (D) button, and then go to "Configuring

Your Network Connection" on page 20 after you

have completed the initial setup. "Configuring

Your Network Connection" provides a full

explanation of how to configure your network

connection manually.

configure the initial settings.

• The OSD (On Screen Display) may change in this

product after you upgrade the software version.

• The access steps may differ depending on the

menu you selected.

Turn on your TV after connecting the product, and

then turn on the product. When you turn on the

product for the first time, the product automatically

displays the Initial Settings Language screen.

If you have no network, select Skip by pressing

the BLUE (D) button. The Initial Settings

Complete screen appears, and then the Home

screen appears.

Press the ▲▼ buttons to select the desired

language, and then press the E button.

Press the E button to start function setup.

| NOTES |

If you skip network setup here or the setup does

Initial Settings

not work correctly, you can go to "Configuring Your

Network Connection" on page 20 to set up the

product's network connection later.

TV Aspect and Network will be set.

Each setting may be changed later under "Settings".

Initial Settings I Network - Wired

Start

Choose the method to configure Internet Protocol (IP).

Please make sure that the Ethernet cable is connected.

Auto : Configure IP automatically.

Select

Manual

Auto

The TV Aspect screen appears. Press the ▲▼

buttons to select a TV Aspect ratio, and then press

the E button.

Skip

Move

Select

You have four choices:

16:9 Original - For widescreen TVs. Displays

widescreen pictures in their original 16:9 format and

4:3 pictures (the old, standard format) in 4:3 pillar

box format with black bars on the left and right.

16:9 Full - For widescreen TVs. Displays widescreen

pictures in their original 16:9 format and expands 4:3

pictures to fill the 16:9 screen.

The product verifies the network connection and

then connects to the network. When it is done,

press the E button. The Initial Settings Complete

screen appears, and then the Home screen

appears.

Initial Settings I Network - Wired

4:3 Letter Box - For older, standard screen, analog

TVs. Displays 4:3 pictures in full screen and 16:9

pictures in letter box format that retains the 16:9

aspect ratio but puts black bars above and below

the picture.

MAC Address (d0:66:7b:dc:28:fc)



IP Address, Subnet Mask, Gateway, DNS Server

Gateway Ping



Internet Service Test

Your network is operating properly.

If you still have a network problem, contact your network service provider.

4:3 Pan-Scan - For older, standard screen, analog

TVs. Displays 4:3 pictures in full screen and 16:9

pictures in Pan-Scan format that fills the screen, but

cuts off the left and right sides of the picture and

enlarges the middle vertically.



Select

English

Download from Www.Somanuals.com. All Manuals Search And Download.

To select an option on the Home screen, move the

| NOTES |

cursor using the

buttons until it highlights

▲▼◄►

If you want to display the Initial Setting screen again

the option of your choice, and then press the E

and make changes, select the Reset option. (See

page 20)

button.

If you use an HDMI cable to connect the product to

an Anynet+ (HDMI-CEC)-compliant Samsung TV and

1.) You have set the Anynet+ (HDMI-CEC) feature to

ON in both the TV and the product and 2.) You have

set the TV to a language supported by the product,

the product will select that language as the preferred

language automatically.

| NOTES |

To play or view video, photo, music files located on

your PC, you must connect your home theater and PC

to a home network and you must download, install,

and configure the DLNA software on your PC. (See

page 22.)

Accessing the Settings Screen

The Home Screen

Select Settings on the Home screen, and then

press the E button. The Settings screen appears.

Videos

Photos

Music

Settings

Display

Audio

3D Settings

TV Aspect Ratio

BD Wise

16:9 Original

Off

Network

System

Language

Security

General

Support

Resolution

Auto

Movie Frame (24 Fs)

HDMI Color Format

HDMI Deep Color

Progressive Mode

Off

Auto

►

App 1

App 2

App 3

dView Devices

App 4

Enter

Off

Auto

No Disc

a Change Device

Selects Photos.

Selects Videos.

Selects Music.

To access the menus, sub-menus, and options

on the Settings screen, please refer to the remote

control illustration below.

| NOTES |

If you leave the product in the stop mode for more

Selects Settings.

Selects applications.

than 5 minutes without using it, a screen saver will

appears on your TV. If the product is left in the screen

saver mode for more than 20 minutes, the power

automatically turns off.

Displays the buttons you can use on the

remote to access functions.

Buttons on the Remote Control Used

for the Settings Menu

SUBTITLE

HOME

REPEAT

TOOLS

INFO

RETURN

EXIT

HOME Button : Press to move to the Home

screen.

English

Download from Www.Somanuals.com. All Manuals Search And Download.

Settings

RETURN (') Button : Return to the previous

BD Wise is Samsung’s latest inter-

connectivity feature.

menu.

When you connect a Samsung

product and a Samsung TV

with BD Wise to each other via

HDMI, and BD Wise is on in

both the product and TV, the

product outputs video at the video

resolution and frame rate of the

Blu-ray/DVD Disc.

E (Enter) / DIRECTION Button :

• Press

item.

to move the cursor or select an

▲▼◄►

BD Wise

• Press the E button to activate the currently

selected item or confirm a setting.

EXIT Button : Press to exit the current menu.

| NOTES |

Lets you set the output resolution

of the HDMI video signal to

BD Wise, Auto, 1080p, 1080i,

720p, 480p. The number indicates

the number of lines of video

per frame. The i and p indicate

interlaced and progressive scan,

respectively. The more lines, the

higher quality.

The E button on the product's front panel can be

used for same purpose as the E button on the

remote control.

Resolution

Detailed Function Information

Each Settings function, menu item, and individual option

is explained in detail on-screen. To view an explanation,

use the

buttons to select the function, menu

▲▼◄►

item, or option.

Setting the Movie Frame (24 Fs)

feature to Auto lets the product

adjust its HDMI output to 24

The explanation will usually appear on the bottom of the

screen. A short description of each Settings function

starts on this page. Additional information on some of the

functions is also in the Appendix of this manual.

frames per second automatically

for improved picture quality if

attached to a 24Fs compatible TV.

Movie Frame

(24 Fs)

Settings Menu Functions

• You can enjoy the Movie Frame

(24 Fs) feature only on a TV

supporting this frame rate.

Display

Set up the 3D related functions.

• Movie Frame is only available

when the product is in the HDMI

1080i or 1080p output resolution

modes.



3D Blu-ray Playback Mode:

Select whether to play a Blu-

ray Disc with 3D contents in 3D

Mode. If you move to the Home or

Smart Hub Home menu while in

3D mode, the product will switch

to 2D automatically.

Lets you set the color space format

for the HDMI output to match

the capabilities of the connected

device (TV, monitor, etc).

HDMI Color

Format

3D Settings



Screen Size: Enter the size of the

TV attached to the product. The

product will automatically adjust

the 3D output to the screen size of

the TV.

Lets you set the product to output

video from the HDMI OUT jack with

deep color. Deep color provides

more accurate color reproduction

with greater color depth.

HDMI Deep

Color

Lets you adjust the output of

the product to the screen size of

your TV. See page 16, Step 4 for

a description of the screen size

options.

Progressive

Mode

Lets you improve picture quality

when viewing DVDs.

TV Aspect

Ratio

Audio

Lets you adjust the following

speaker settings and turn the test

tone on and off so you can test the

speakers.

Speaker

Settings

English

Download from Www.Somanuals.com. All Manuals Search And Download.



Level: Lets you adjust the relative

loudness of each speaker from 6db

to -6db. For example, if you like

deep bass, you can increase the

loudness of the subwoofer by 6db.

When the product is attached to a

digital TV, lets you adjust the audio

delay so that the audio syncs with

the video. You can set the delay

between 0 and 300 milliseconds.

Lets you select the multi-channel

downmix method that is compatible

with your stereo system. You

can choose to have the product

downmix to normal stereo or to

surround compatible stereo.

Audio Sync

Distance: Lets you adjust the

relative distance of each speaker

from the listening position up to 30

feet. The farther the distance, the

louder the speaker will be.

Downmixing

Mode

Test Tone: Lets you run the test

tone function so you can test your

adjustments. Setting Test Tone to

On turns the Test Tone on. Setting

it to Off turns it off.

Network

For more information about Network

Settings and network functions, see

"Networks and the Internet" starting

on page 20.

Wired

Lets you select which speakers you

want active, either the TV's speakers

or the home theater's speakers.

Speaker

Network

Settings

Selection

Lets you direct the sound from the

TV to the home theater speakers.

Requires an HDMI connection and

an Audio Return Channel (ARC)

compatible TV.

Lets you test the Internet Protocol

Network Test

setup to see if it is working correctly.

Lets you check whether a

Network

connection to the network and the

Internet have been established.

Status

• When Audio Return Channel is

set to Auto, the home theater

automatically selects either ARC

or optical input as the audio

source, depending on your

connections. If Audio Return

Channel is active, optical input

does not work.

Audio Return

Channel

BD-Live

Internet

Lets you allow or prohibit an Internet

connection for the BD-Live service.

Connection

System

Lets you re-run the Initial Settings

Initial Settings

procedure. See page 16 for details.

Lets you set the Digital Output to

match the capabilities of the AV

receiver you’ve connected to the

product. For more details, please

refer to the digital output selection

table. (See page 31)

Lets you apply dynamic range

control to Dolby Digital, Dolby Digital

Plus, and Dolby TrueHD audio.

Anynet+ is a convenient function

that offers linked operations with

other Samsung products that have

the Anynet+ feature and lets you

control those products with one

Samsung TV remote. To operate

this function, you must connect this

product to an Anynet+ Samsung TV

using a HDMI cable.

Lets you manage the contents you

downloaded through a Blu-ray disc

that supports the BD-Live service.

You can view the information about

the USB device you are using for

BD Live data storage including

the storage space. You can also

delete BD Live data and change the

device.

Digital Output

Anynet+

(HDMI-CEC)



Auto: Automatically controls the

dynamic range of Dolby TrueHD

audio, based on information in the

Dolby TrueHD soundtrack. Also

turns dynamic range control off for

Dolby Digital and Dolby Digital Plus.

Dynamic

BD Data

Range Control

Management



Off: Leaves the dynamic range

uncompressed, letting you hear the

original sound.

On: Turns dynamic range control on

for all three Dolby formats. Quieter

sounds are made louder and the

volume of loud sounds is reduced.

English

Download from Www.Somanuals.com. All Manuals Search And Download.

Settings

Configuring Your Network Connection

Language

If you skipped network setup during the Initial Setup,

follow the instructions below to configure the home

theater's network connection.

You can select the language you prefer for the On-

Screen Menu, disc menu, etc.

• The selected language will only appear if it is

supported on the disc.

Before you begin, contact your ISP to find out if your

IP address is static or dynamic. If it is dynamic, we

recommend you use the automatic procedure below. If it

is static, you must use the manual procedure that follows.

Security

• Before you begin, confirm that the product is

connected to your router with a network cable.

The default PIN is 0000. Enter the default PIN to

access the security function if you haven't created your

own PIN.

Automatic

Prevents playback of Blu-ray Discs

To start the configuration process, follow these steps:

BD Parental

Rating

with a rating equal to or above a

specific age ratings unless the PIN

is entered.

In the Home menu, select Settings, and then press

the E button.

Select Network, and then press the E button.

Prevents playback of DVDs with a

rating above a specific numerical

rating unless the PIN is entered.

DVD Parental

Rating

Select Wired Network Settings, and then press

the E button.

Changes the 4-digit PIN used to

The Wired Network Settings screen appears.

Change PIN

access security functions.

Press the

button on the Internet Protocol Setup

►

menu.

General

Use

button to select Auto, and then press the

▲▼

E button.

You can specify the time zone that

Time Zone

is applicable to your area.

Settings

Wired Network Settings

Internet Protocol Setup : Auto

Support

Display

Audio

IP Address

Subnet Mask

Gateway

Network

System

Language

For more information about the

Software Upgrade function, see

"Upgrading Software" on page 21.

Software

Upgrade

Security

General

Support

DNS

DNS Server

: Auto

Contact

Provides contact information for

Samsung

assistance with your product.

>Move

Select 'Return

Terms of

Service

View the general disclaimer

regarding third party contents and

services.

All settings will revert to the default

except for the network settings. The

default security password is 0000.

Agreement

The Network function acquires and fills in the values

for IP Address, Subnet Mask, etc., automatically.

After the Network function has acquired the network

Reset

values, press the RETURN (') button.

Select Network Test, and then press E. The

home theater validates the network connection.

When it is done, press the RETURN (') button.

Networks and the Internet

Manual

When you connect this product to a network, you can

use network based applications and functions such as

BD-LIVE and upgrade the product's software through the

network connection.

If you have a static IP address or the Automatic procedure

does not work, you’ll need to set the Network Settings

values manually. You can get the Network Settings from

your Internet Service Provider (ISP).

English

Download from Www.Somanuals.com. All Manuals Search And Download.

Select one of the following methods:

• By Online

Settings

Wired Network Settings

Internet Protocol Setup : Manual

Display

• By USB

Audio

IP Address

Subnet Mask

Gateway

• Auto Upgrade Notification

Network

System

Language

255 255 255

Press the E button.

Directions for each method begin below.

Security

General

Support

DNS

DNS Server

: Manual

| NOTES |

The update is complete when the product turns off

>Move

Select 'Return

after restarting. Press the POWER button to turn

on the updated product for your use. Never turn the

product on or off manually during the update process.

Samsung Electronics takes no legal responsibility for

product malfunction caused by an unstable Internet

connection or consumer negligence during a software

upgrade.

Follow the first four steps in the Automatic

procedure, but select Manual instead of Auto in

Step 4.

Press the

button to go to the first entry field (IP

▼

Address).

If you want to cancel the upgrade while the upgrade

software is downloading, press the E button.

Use the number buttons on your remote to enter

numbers.

By Online

When done with each field, use the ► button to

move successively to the next field.

You can also use the other arrow buttons to move

up, down, and back.

Your product must be connected to the Internet to use

the By Online function. Remove all discs before you

begin.

Select By Online, and then press the E button.

Enter the IP Address, Subnet Mask, and Gateway

The Connecting to Server message appears.

values.

If an update is available, a popup message appears

asking if you want to upgrade. If you select Yes, the

product turns off automatically, turns on, and then

begins the upgrade.

Press the ▼ button to go to DNS.

Press the ▼ button to go to the first DNS entry field.

Enter the numbers as above.

Press the RETURN (') button on your remote.

| IMPORTANT |

Select Network Test, and then press E. When the

Never turn the home theater on or off manually during

test is completed, press the RETURN (') button to

a software upgrade.

exit to the previous screen.

The update progress popup appears. When

Select Network Status, and then press E.

10.

11.

the update is completed, the product turns off

automatically again.

The Network Status screen appears.

The product verifies the network connection and

then connects to the network. When it is done,

highlight OK, and then press E.

Press the POWER button to turn on the product.

| NOTES |

The update is complete when the product turns off

after restarting. Press the POWER button to turn on

Upgrading Software

the updated product for your use.

Never turn the product off or on manually during the

update process.

The Software Upgrade menu allows you to upgrade the

product’s software for performance improvements or

additional services.

Samsung Electronics takes no legal responsibility for

a product malfunction caused by an unstable internet

connection or consumer negligence during software

upgrade.

• Never turn the product off or back on manually

during the update process.

In the Home menu, select Settings, and then press

By USB

the E button.

Visit www.samsung.com.

Select Support, and then press the E button.

Click SUPPORT on the top right of the page.

Select Software Upgrade, and then press the E

button.

English

Download from Www.Somanuals.com. All Manuals Search And Download.

Settings

Enter the product's model number into the search

| NOTES |

field. As you enter the model number, a drop down

will display products that match the model number.

The update is complete when the product turns off

after restarting. Press the POWER button to turn

on the updated product for your use. Never turn the

product on or off manually during the update process.

Samsung Electronics takes no legal responsibility for

a product malfunction caused by an unstable Internet

connection or consumer negligence during software

upgrade.

Left click your product's model number in the drop

down list.

On the page that appears, scroll down to and then

click Firmware Manuals & Downloads.

Click Firmware in the center of the page.

Click the ZIP icon in the File column on the right

side of the page.

Setting Up DLNA

Click Send in the first pop-up that appears. Click

OK in the second pop-up to download and save the

firmware file to your PC.

DLNA enables you to play music, video and photo files

located in your PC using this product. To use DLNA, you

must connect the product to your PC via the network (See

page 14) and install the SAMSUNG PC Share Manager

on the PC.

Unzip the zip archive to your computer. You should

have a single folder with the same name as the zip

file.

Copy the folder to a USB flash drive.

10.

11.

To Download the DLNA Software

Make sure no disc is inserted in the product, and

then insert the USB flash drive into the USB port of

the product.

To use DLNA with your PC, you must install DLNA

software on your PC. You can download the PC software

and get detailed instructions for using DLNA from the

Samsung.com website.

In the product’s menu, go to Settings > Support >

12.

13.

Software Upgrade.

Go to www.samsung.com.

Select By USB.

Click SUPPORT at the top of the page.

| NOTES |

Enter the product's model number into the search

field. As you enter the model number, a drop down

will display products that match the model number.

There should be no disc in the product when you

upgrade the software using the USB Host jack.

Never turn the product off or on manually during the

update process.

Left click your product's model number in the drop

down list.

When the software upgrade is done, check the

On the page that appears, scroll down to and then

software details in the Software Upgrade menu.

click Firmware Manuals & Downloads.

Click the Software tab.

Auto Upgrade Notification

On the software tab, click the EXE icon on the right

side of the DLNA line.

If your product is connected to the network and you

set Auto Upgrade Notification on, the product will notify

you if a new software version is available with a pop-up

message.

In the first pop-up that appears, click Send. In the

10.

second pop-up, click Save File.

Turn on the product.

Find the DLNA install file on your disk, and then

double click the file.

In the Software Upgrade menu, set Auto Upgrade

Notification to On.

In the pop-up that appears, click Run, and then

If there is a new software version available, the

product will notify you with a pop-up message.

follow the directions that appear on your screen.

To upgrade the firmware, select Yes. The product

turns off automatically, turns on, and then begins

the upgrade.

Download the DLNA Installation/Instruction manual from

the same Software Tab by clicking the corresponding

PDF file symbol in the File column on the right. The

file, in PDF format, will download and open. Follow the

directions to install and setup DLNA. You can view and/or

save the file.

The update progress popup will appear. When

the update is complete, the product will turn off

automatically again.

Press the POWER button to turn on the product.

| NOTES |

To use DLNA with your smartphone, you need to

connect your set & smartphone to the same router.

English

Download from Www.Somanuals.com. All Manuals Search And Download.

Media Play

-1

6 . Press the ▲▼ buttons to select Videos, Photos or

Playing Files on a USB Device

Music, then press the E button.

-1

7 . If files appear on the screen go to Step 8 . If file

folders appear on the screen, use the ▲▼◄►

buttons to select a folder, press E, and then go to

You can play multimedia files located on a connected

USB device.

Move to the Home menu.

-1

Step 8 .

-1

In Stop mode, connect the USB storage device to

8 . Use the ▲▼◄► buttons to select a file to play or

the USB port on the front panel of the product. The

message “Do you want to access the device?” is

displayed.

view, and then press the E button.

| NOTES |

3D file playback is not supported.

Press the ◄► button to select Yes, then press the

E button.

To prevent possible damage to the USB memory,

you must remove the USB storage device safely

using the “Safely Remove USB” function. Press the

HOME button to move to the Home menu, select the

YELLOW (C) button, and then press the E button.

Press the RED (A) button.

Videos

Photos

Music

Settings

Playing a Disc with User Recorded

Content

You can play multimedia files you have recorded on DVD

or CD discs.

USB Flash Disk

App 2

App 3

dView Devices

App 4

Enter

Turn on the home theater.

a Change Device

Open the disc tray, place a user recorded disc into the

disc tray with the disc’s label facing up, and then close

the tray.

Press the ▲▼ buttons to select USB Flash Memory

or USB Flash Disc, and then press the E button.

After the disc loads, press the RED (A) button.

Press the ◄► buttons to select Videos, Photos or

Press the ▲▼◄► buttons to select CD or DVD,

Music, then press the E button.

and then press the E button.

If files appear on the screen go to Step 8. If file

folders appear on the screen, use the ▲▼◄►

buttons to select a folder, press E, and then go to

Step 8.

Press the ▲▼ buttons to select Videos, Photos or

Music, then press the E button.

If files appear on the screen, go to Step 7. If file

folders appear on the screen, use the ▲▼◄►

buttons to select a folder, press E, and then go to

Step 7.

Use the ▲▼◄► buttons to select a file to play or

view, and then press the E button.

Use the ▲▼◄► buttons to select a file to play or

-1

4 . Press the BLUE (D) button.

view, and then press the E button.

Settings

USB Flash Disk

-1

3 . After the disc loads, press the BLUE (D) button.

4 . Press the ◄► buttons to select CD or DVD, and

then press the E button.

-1

5 . Press the ▲▼ buttons to select Videos, Photos or

Music, and then press the E button.

-1

6 . If files appear on the screen go to Step 7 . If file

folders appear on the screen, use the ▲▼◄►

buttons to select a folder, press E, and then go to

App 1

USB Flash Disk

App 2

App 3

App 4

Enter

dHome

-1

Step 7 .

-1

7 . Use the ▲▼◄► buttons to select a file to play or

-1

5 . Press the ◄► buttons to select USB Flash Memory

view, and then press the E button.

or USB Flash Disc, and then press the E button.

English

Download from Www.Somanuals.com. All Manuals Search And Download.

Media Play

Using the disc menu, title menu, popup menu

and title list

Playing a Commercial Video Disc

Place a disc into the disc tray with the disc’s label

facing up and then close the disc tray. Playback starts

automatically. If it does not playback automatically, move

to Videos in the Home menu and press the E button.

• DISC MENU : During playback, press this

button to display the Disc menu.

• TITLE MENU : During playback, press this

button to display the Title menu.

In most cases, commercial videos will display a disc

menu. To play the movie on the disc, select Play on the

disc menu, and then press E.

If your disc has a playlist, press the GREEN

(B) button to go to the playlist.

• POPUP MENU : During playback, press this

button to display the Pop-up menu.

| NOTES |

• DISC MENU or TITLE MENU : During

playback, press this button to display the title

list.

For more information about playing videos, go to

"Controlling Video Playback" on this page.

Repeat Playback

Controlling Video Playback

During playback, press the REPEAT button

You can control the playback of video files located

on Blu-ray, DVD, and CD discs, and on USB storage

devices. Depending on the media, some of the functions

on the remote control.

Press the ▲▼ buttons to select Off, Title,

Chapter, All or Repeat A-B then press the

^dB^eu^sct^rt^ibo^en^dsⁱⁿo^thn^ist^mh^ae^nuR^ale^mm^ayoⁿt^oe^{t b}C^{e a}o^vn^ait^lar^bo^lel^.used

button.

Repeat A-B

for Video Playback

Press the

button at the point where

you want repeat play to start (A).

DISC MENU

TITLE MENU

POPUP

Press the

button at the point where

you want repeat play to stop (B).

To return to normal play, press the REPEAT

button again.

SUBTITLE

HOME

REPEAT

Press the

button.

| NOTES |

Depending on the disc, the screen may not

display all repeat options.

Playback related buttons

The product does not play sound in Search,

Slow, or Step mode.

The screen may not display Chapter or

Title immediately. Continue to press the

▲▼ buttons until your choice is inside the

applicable field.

• 6 : Starts playback.

• 5 : Stops playback.

• 7 : Pauses playback.

To return to normal play, press the REPEAT

button again, press the ▲▼ buttons to select

• Fast Motion Play : During playback, press

Off, and then press the

button.

the 3 or 4 button.

The screen may not display Repeat A-B

immediately. Continue to press the ▲▼

buttons until Repeat A-B is inside the

applicable field.

Each time you press the 3 or 4 button, the

playback speed will change.

• Slow Motion Play : In pause mode, press the

4 button.

You must set point (B) at least 5 seconds of

playing time after point (A).

Each time you press the 4 button, the

playback speed will change.

• Step Motion Play : In pause mode, press the

7 button.

Each time you press the 7 button, a new

frame appears.

•

Skip Motion Play : During playback, press the

1 or 2 button.

Each time you press 1 or 2 button, the disc

moves to the previous or next chapter or file.

English

Download from Www.Somanuals.com. All Manuals Search And Download.

Menu that appears only when a file plays

Using the TOOLS Menu

During playback, press the TOOLS button.

Select to set the desired full screen

Full Screen

size. You can select Original,

If the movie or video have more than

Mode1 (larger), and Mode2 (largest).

Title

one title, move to or select a desired

title.

Information

| NOTES |

Check the video file's information.

Select to move to a specific

Playing Time

Repeat Mode

playback point. Use the numeric

buttons to input the playback point.

Depending on the disc or storage device, the Tools

Cr^mea^ent^uin^mg^aya^diV^ffei^rd^{. A}e^llo^opP^tiola^nsyl^mis^at^{y not be displayed.}

Select to repeat a specific title,

chapter (BD/DVD discs only) or

marked section.

You can create a playlist of video files in a way that is

nearly identical to the way you create a playlist of music

files. For instructions, see "Creating a Music Playlist" on

page 26.

Select to set the picture mode.

Mode

 User : Lets you adjust the

Brightness, Contrast, Color

and Sharpness function

respectively.

Picture

Playing a Pre-Recorded

Settings

 Dynamic : Choose this setting

to increase Sharpness.

Commercial Audio Disc

 Normal : Choose this setting

for most viewing applications.

 Movie : This is the best setting

for watching movies.

Insert an Audio CD (CD-DA) or an MP3 Disc into the

disc tray.

• For an Audio CD (CD-DA), the first track will be

played automatically. Tracks on a disc are played

in the order in which they were recorded on the

disc.

Lets you adjust the audio delay so

that the audio syncs with the video.

You can set the delay between 0

and 300 milliseconds.

Audio Sync

• For an MP3 disc, press the ▲▼ buttons to select

Music, then press the E button.

Playlist

1/12

Menu that appears only when a BD/DVD

disc plays

Tools

TRACK

001

TRACK 001

Repeat Mode

Track

05:57

Adjust

Select

Return

TRACK 002

TRACK 003

TRACK 004

TRACK 005

TRACK 006

04:27

04:07

03:41

03:17

03:35

Select to move to a chapter that you

Chapter

want to watch.

Select to set the desired audio

00:08 / 05:57

Audio

language.

Select to set the desired subtitle

Pause

Tools

Return

Subtitle

language.

To view a scene from another angle.

To play a particular track, use the ▲▼ buttons on the

remote to select the track, and then press the

button.

The Angle option displays the

Angle

number of angles available to view

(1/1, 1/2, 1/3, etc.).

| NOTES |

BONUSVIEW

Video /

Select to set the desired bonusview

option.

For more information about playing music, go to

BONUSVIEW

Audio

"Controlling Music Playback" on page 26.

English

Download from Www.Somanuals.com. All Manuals Search And Download.

Media Play

Press the ▲▼◄► buttons to move to the desired

file, and then press the YELLOW (C) button to

select it. Repeat this procedure to select additional

files.

Controlling Music Playback

You can control the playback of music content located on

DVDs, CDs, and USB storage devices.

Music TRACK 002

2 files selected 1/2 Page

Buttons on the Remote Control used

TRACK 001