SCX-5835NX_5935NX Series
Multi Functional Printer
User’s Guide
imagine the possibilities
Thank you for purchasing a Samsung product.
Download from Www.Somanuals.com. All Manuals Search And Download.
safety information
These warnings and precautions are included in order to prevent injury to you and others, as well as preventing any
potential damage to your machine. Be sure to read and understand all of these instructions before using the machine.
Use common sense for operating any electrical appliance and whenever using your machine. Also, follow all warnings and
instructions marked on the machine and in the accompanying literature. After reading this section, keep it in a safe place
for future reference.
IMPORTANT SAFETY SYMBOLS
This section explains the meanings of all icons and signs in the user's guide. These safety symbols are in order, according to the degree of
danger.
Explanation of all icons and signs used in the user’s guide:
Warning
Hazards or unsafe practices that may result in severe personal injury or death.
Caution
Hazards or unsafe practices that may result in minor personal injury or property damage.
Do not attempt.
Do not disassemble.
Do not touch.
Unplug the power cord from the wall socket.
Make sure the machine is grounded to prevent electric shock.
Call the service center for help.
Follow directions explicitly.
OPERATING ENVIRONMENT
Warning
Do not use if the power cord is damaged or if the
electrical outlet is not grounded.
Do not bend, or place heavy objects on the power
cord.
► This could result in electric shock or fire.
► Stepping on or allowing the power cord to be
crushed by a heavy object could result in electric
shock or fire.
Do not place anything on top of the machine (water,
small metal or heavy objects, candles, lit cigarrettes,
etc.).
Do not remove the plug by pulling on the cord; do not
handle the plug with wet hands.
► This could result in electric shock or fire.
► This could result in electric shock or fire.
Safety information_ 3
Download from Www.Somanuals.com. All Manuals Search And Download.
If the machine gets overheated, it releases smoke,
makes strange noises, or generates an odd odor,
immediately turn off the power switch and unplug the
machine.
► This could result in electric shock or fire.
Caution
During an electrical storm or for a period of
non-operation,remove the power plug from the
electrical outlet.
If the plug does not easily enter the electrical outlet, do not
attempt to force it in.
► Call an electrician to change the electrical outlet, or this
► This could result in electric shock or fire.
could result in electric shock.
Be careful, the paper output area is hot.
Do not allow pets to chew on the AC power, telephone or PC
interface cords.
► Burns could occur.
► This could result in electric shock or fire.
If the machine has been dropped, or if the cabinet appears
damaged, unplug the machine from all interface connections
and request assistance from qualified service personnel.
If the machine does not operate properly after these
instructions have been followed, unplug the machine from all
interface connections and request assistance from qualified
service personnel.
► Otherwise, this could result in electric shock or fire..
► Otherwise, this could result in electric shock or fire.
If the machine exhibits a sudden and distinct change in
performance, unplug the machine from all interface
connections and request assistance from qualified service
personnel.
► Otherwise, this could result in electric shock or fire.
OPERATING METHOD
Caution
Do not forcefully pull the paper out during printing.
When printing large quantities, the bottom part of the
paper output area may get hot. Do not allow children
to touch.
► It can cause damage to the machine.
► You (children) may be burned.
Be careful not to put your hand between the machine
and paper tray.
When removing jammed paper, do not use tweezers
or sharp metal objects.
► You may get injured.
► It can cause damage to the machine.
Do not block or push objects into the ventilation opening.
Do not allow too many papers to stack up in the paper output
tray.
► This could result in elevated component temperatures which
can cause damage or fire.
► It could cause damage to the machine.
Use care to avoid paper cuts when replacing paper or removing
jammed paper.
This machine's power interception device is the power cord.
► To switch off the power supply, remove the power cord from
► You may get hurt.
the electrical outlet.
Safety information_ 4
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION / MOVING
Warning
Do not place the machine in an area with dust,
humidity or water leaks.
► This could result in electric shock or fire.
Caution
When moving the machine, turn the power off and
disconnect all cords; then lift the machine with at
least two people.
Do not put a cover over the machine or place it in an airtight
location, such as a closet.
► If the machine is not well-ventilated, this could result in fire.
► The machine could fall, causing human injury or
machine damage.
Do not place the machine on an unstable surface.
Make sure you plug the power cord into a grounded electrical
outlet.
► The machine could fall, causing human injury or machine
damage.
► Otherwise, this could result in electric shock or fire.
The machine should be connected to
Do not overload wall outlets and extension cords.
the power level which is specified on the label.
► This can diminish performance, and could result in electric
shock or fire.
► If you are unsure and want to check the power level you are
using, contact the electrical utility company.
Use only No.26 AWGa or larger, telephone line cord, if
necessary.
Use the power cord supplied with your machine for safe
operation. If you are using a cord which is longer than 2 meters
(79”) with a 140V machine, then the gauge should be 16 AWG
► Otherwise, it can cause damage to the machine.
or larger.
► Otherwise, it can cause damage to the machine, and could
result in electric shock or fire.
a. AWG: American Wire Gauge
MAINTENANCE / CHECKING
Caution
Unplug this product from the wall outlet before
Keep cleaning supplies away from children.
cleaning the inside of the machine. Do not clean the
machine with benzene, paint thinner or achol; do not
spray water directly into the machine.
► Children (you) may get hurt.
► This could result in electric shock or fire.
When you are working inside the machine replacing
supplies or cleaning the inside, do not operate the
machine.
Do not disassemble, repair or rebuild the machine by
yourself.
► It can cause damage to the machine. Call a
► You may get injured.
certified technician when the machine needs repair.
Safety information_ 5
Download from Www.Somanuals.com. All Manuals Search And Download.
Keep the power cable and the contact surface of the plug clean
from dust or water.
To clean and operate the machine, strictly follow the user's
guide provided with the machine.
► This could result in electric shock or fire.
► Otherwise, it can cause damage to the machine.
Do not remove any covers or guards that are fastened with
screws.
► The machine should only be repaired by Samsung service
technician.
SUPPLY USAGE
Caution
Do not disassemble the toner cartridge.
When storing supplies such as toner cartridges, keep
them away from children.
► Toner dust can be dangerous to humans.
► Toner dust can be dangerous to humans.
Do not burn any of the supplies such as toner
cartridge or fuser unit.
Using recycled supplies, such as toner, can cause damage to
the machine.
► It can cause an explosion or fire.
► In case of damage due to the use of recycled supplies, a
service fee will be charged.
When changing the toner cartridge or removing jammed paper,
be careful not to let toner dust touch your body or clothes.
► Toner dust can be dangerous to humans.
Safety information_ 6
Download from Www.Somanuals.com. All Manuals Search And Download.
regulatory information
This machine is designed for our sound environment and certified with several regulatory statements.
LASER SAFETY STATEMENT
The printer is certified in the U.S. to conform to the requirements of DHHS 21 CFR, chapter 1 Subchapter J for Class I(1) laser products, and
elsewhere is certified as a Class I laser product conforming to the requirements of IEC 825.
Class I laser products are not considered to be hazardous. The laser system and printer are designed so there is never any human access to
laser radiation above a Class I level during normal operation, user maintenance or prescribed service condition.
WARNING
Never operate or service the printer with the protective cover removed from Laser/Scanner assembly. The reflected beam, although invisible,
can damage your eyes.
When using this product, these basic safety precautions should always be followed to reduce risk of fire, electric shock, and injury to persons:
TAIWAN ONLY
OZONE SAFETY
During normal operation, this machine produces ozone. The ozone produced does not present a hazard to the operator. However, it is
advisable that the machine be operated in a well ventilated area.
If you need additional information about ozone, request your nearest Samsung dealer.
Regulatory information_ 7
Download from Www.Somanuals.com. All Manuals Search And Download.
MERCURY SAFETY
Contains Mercury, Dispose According to Local, State or Federal Laws.(U.S.A. only)
PERCHLORATE WARNING
This Perchlorate warning applies only to primary CR (Manganese Dioxide) Lithium coin cells in the product sold or distributed ONLY in
California USA.
Perchlorate Material - special handling may apply.
See www.dtsc.ca.gov/hazardouswaste/perchlorate. (U.S.A. only)
POWER SAVER
This printer contains advanced energy conservation technology that reduces power consumption when it is not in active use.
When the printer does not receive data for an extended period of time, power consumption is automatically lowered.
ENERGY STAR and the ENERGY STAR mark are registered U.S. marks.
RECYCLING
Recycle or dispose of the packaging material for this product in an environmentally responsible manner.
CHINA ONLY
Regulatory information_ 8
Download from Www.Somanuals.com. All Manuals Search And Download.
CORRECT DISPOSAL OF THIS PRODUCT (WASTE ELECTRICAL & ELECTRONIC EQUIPMENT)
(Applicable in the European Union and other European countries with separate collection systems)
This marking shown on the product or its literature, indicates that it should not be disposed with other household wastes at the end of its
working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, separate this from other types of
wastes and recycle it responsibly to promote the sustainable reuse of material resources.
Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and
how they can take this item for environmentally safe recycling.
Business users should contact their supplier and check the terms and conditions of the purchase contract. This product should not be mixed
with other commercial wastes for disposal.
CORRECT DISPOSAL OF BATTERIES IN THIS PRODUCT
(Applicable in the European Union and other European countries with separate battery return systems.)
This marking on the battery, manual or packaging indicates that the batteries in this product should not be disposed of with other household
waste at the end of their working life. Where marked, the chemical symbols Hg, Cd or Pb indicate that the battery contains mercury, cadmium
or lead above the reference levels in EC Directive 2006/66. If batteries are not properly disposed of, these substances can cause harm to
human health or the environment.
To protect natural resources and to promote material reuse, please separate batteries from other types of waste and recycle them through your
local, free battery return system.
RADIO FREQUENCY EMISSIONS
FCC Information to the User
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
•
•
This device may not cause harmful interference, and
This device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
•
•
•
•
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or experienced radio TV technician for help.
Change or modifications not expressly approved by the manufacturer responsible for compliance could void the user's authority to
operate the equipment.
Canadian Radio Interference Regulations
This digital apparatus does not exceed the Class A limits for radio noise emissions from digital apparatus as set out in the interference-causing
equipment standard entitled “Digital Apparatus”, ICES-003 of the Industry and Science Canada.
Cet appareil numérique respecte les limites de bruits radioélectriques applicables aux appareils numériques de Classe A prescrites dans la
norme sur le matériel brouilleur: “Appareils Numériques”, ICES-003 édictée par l’Industrie et Sciences Canada.
RFID (RADIO FREQUENCY INTERFACE DEVICE)
RFID operation is subject to the following two conditions:(1) this device may not cause interference, and (2) this device must accept any
interference, including interference that may cause undesired operation of the device. (U.S.A., France, Taiwan only)
Regulatory information_ 9
Download from Www.Somanuals.com. All Manuals Search And Download.
TAIWAN ONLY
RUSSIA ONLY
AE95
FAX BRANDING
The Telephone Consumer Protection Act of 1991 makes it unlawful for any person to use a computer or other electronic device to send any
message via a telephone facsimile machine unless such message clearly contains in a margin at the top or bottom of each transmitted page or
on the first page of the transmission the following information:
1. the date and time of transmission
2. identification of either business, business entity or individual sending the message; and
3. telephone number of either the sending machine, business, business entity or individual.
The Telephone Company may make changes in its communications facilities, equipment operations or procedures where such action is
reasonably required in the operation of its business and is not inconsistent with the rules and regulations in FCC Part 68. If such changes can
be reasonably expected to render any customer terminal equipment incompatible with telephone company communications facilities, or require
modification or alteration of such terminal equipment, or otherwise materially affect its use or performance, the customer shall be given
adequate notice in writing, to allow the customer an opportunity to maintain uninterrupted service
Regulatory information_ 10
Download from Www.Somanuals.com. All Manuals Search And Download.
RINGER EQUIVALENCE NUMBER
The Ringer Equivalence Number and FCC Registration Number for this machine may be found on the label located on the bottom or rear of the
machine. In some instances you may need to provide these numbers to the telephone company.
The Ringer Equivalence Number (REN) is a measure of the electrical load placed on the telephone line, and is useful for determining whether
you have “overloaded” the line. Installing several types of equipment on the same telephone line may result in problems making and receiving
telephone calls, especially ringing when your line is called. The sum of all Ringer Equivalence Numbers of the equipment on your telephone
line should be less than five in order to assure proper service from the telephone company. In some cases, a sum of five may not be usable on
your line. If any of your telephone equipment is not operating properly, you should immediately remove it from your telephone line, as it may
cause harm to the telephone network.
The equipment complies with Part 68 of the FCC rules and the requirements adopted by the ACTA. On the left side of this equipment is a label
that contains, among other information, a product identifier in the format US:AAAEQ##TXXXX. If requested, this number must be provided to
the telephone company.
FCC Regulations state that changes or modifications to this equipment not expressly approved by the manufacturer could void the user’s
authority to operate this equipment. In the event that terminal equipment causes harm to the telephone network, the telephone company
should notify the customer that service may be stopped. However, where prior notice is impractical, the company may temporarily cease
service, providing that they:
a) promptly notify the customer.
b) give the customer an opportunity to correct the equipment problem.
c) inform the customer of the right to bring a complaint to the Federal Communication Commission pursuant to procedures set out in
FCC Rules and Regulations Subpart E of Part 68.
You should also know that:
•
•
Your machine is not designed to be connected to a digital PBX system.
If you intend to use a computer modem or fax modem on the same phone line as your machine, you may experience transmission and
reception problems with all the equipment. It is recommended that no other equipment, except for a regular telephone, share the line with
your machine.
•
•
If your area experiences a high incidence of lightning or power surges, we recommend that you install surge protectors for both the power
and the telephone lines. Surge protectors can be purchased from your dealer or telephone and electronic specialty stores.
When programming emergency numbers and/or making test calls to emergency numbers, use a non-emergency number to advise the
emergency service dispatcher of your intentions. The dispatcher will give you further instructions on how to actually test the emergency
number.
•
•
This machine may not be used on coin service or party lines.
This machine provides magnetic coupling to hearing aids.
You may safely connect this equipment to the telephone network by means of a standard modular jack, USOC RJ-11C.
REPLACING THE FITTED PLUG (FOR UK ONLY)
Important
The mains lead for this machine is fitted with a standard (BS 1363) 13 amp plug and has a 13 amp fuse. When you change or examine the
fuse, you must re-fit the correct 13 amp fuse. You then need to replace the fuse cover. If you have lost the fuse cover, do not use the plug until
you have another fuse cover.
Contact the people from you purchased the machine.
The 13 amp plug is the most widely used type in the UK and should be suitable. However, some buildings (mainly old ones) do not have normal
13 amp plug sockets. You need to buy a suitable plug adaptor. Do not remove the moulded plug.
If you cut off the moulded plug, get rid of it straight away.
You cannot rewire the plug and you may receive an electric shock if you plug it into a socket.
Regulatory information_ 11
Download from Www.Somanuals.com. All Manuals Search And Download.
Important warning:
You must earth this machine.
The wires in the mains lead have the following color code:
•
•
•
Green and Yellow: Earth
Blue: Neutral
Brown: Live
If the wires in the mains lead do not match the colors marked in your plug, do the following:
You must connect the green and yellow wire to the pin marked by the letter “E” or by the safety ‘Earth symbol’ or colored green and yellow or
green.
You must connect the blue wire to the pin which is marked with the letter “N” or colored black.
You must connect the brown wire to the pin which is marked with the letter “L” or colored red.
You must have a 13 amp fuse in the plug, adaptor, or at the distribution board.
DECLARATION OF CONFORMITY (EUROPEAN COUNTRIES)
Approvals and Certifications
The CE marking applied to this product symbolizes Samsung Electronics Co., Ltd. Declaration of Conformity with the following applicable
93/68/EEC Directives of the European Union as of the dates indicated:
The declaration of conformity may be consulted at www.samsung.com/printer, go to Support > Download center and enter your printer name to
browse the EuDoC.
January 1, 1995: Council Directive 2006/95/EC Approximation of the laws of the member states related to low voltage equipment.
January 1, 1996: Council Directive 2004/108/EC (92/31/EEC), approximation of the laws of the Member States related to electromagnetic
compatibility.
March 9, 1999: Council Directive 1999/5/EC on radio equipment and telecommunications terminal equipment and the mutual recognition of
their conformity. A full declaration, defining the relevant Directives and referenced standards can be obtained from your Samsung Electronics
Co., Ltd. representative.
EC Certification
Certification to 1999/5/EC Radio Equipment & Telecommunications Terminal Equipment Directive (FAX)
This Samsung product has been self-certified by Samsung for pan-European single terminal connection to the analogue public switched
telephone network (PSTN) in accordance with Directive 1999/5/EC. The product has been designed to work with the national PSTNs and
compatible PBXs of the European countries:
In the event of problems, you should contact the Euro QA Lab of Samsung Electronics Co., Ltd. in the first instance.
The product has been tested against TBR21. To assist in the use and application of terminal equipment which complies with this standard, the
European Telecommunication Standards Institute (ETSI) has issued an advisory document (EG 201 121) which contains notes and additional
requirements to ensure network compatibility of TBR21 terminals. The product has been designed against, and is fully compliant with, all of the
relevant advisory notes contained in this document.
OPENSSL LICENSE
Copyright (c) 1998-2001 The OpenSSL Project. All rights reserved.
Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:
1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the
documentation and/or other materials provided with the distribution.
3. All advertising materials mentioning features or use of this software must display the following acknowledgment: "This product includes
software developed by the OpenSSL Project for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to endorse or promote products derived from this software without
prior written permission. For written permission, please contact openssl-core@openssl.org.
5. Products derived from this software may not be called "OpenSSL" nor may "OpenSSL" appear in their names without prior written
permission of the OpenSSL Project.
6. Redistributions of any form whatsoever must retain the following acknowledgment: "This product includes software developed by the
Regulatory information_ 12
Download from Www.Somanuals.com. All Manuals Search And Download.
OpenSSL Project for use in the OpenSSL Toolkit (http://www.openssl.org/)"
THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY EXPRESSED OR IMPLIED WARRANTIES, INCLUDING,
BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
DISCLAIMED. IN NO EVENT SHALL THE OpenSSL PROJECT OR ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
This product includes cryptographic software written by Eric Young(eay@cryptsoft.com). This product includes software written by Tim Hudson
(tjh@cryptsoft.com).
ORIGINAL SSLEAY LICENSE
Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com) All rights reserved.
This package is an SSL implementation written by Eric Young (eay@cryptsoft.com). The implementation was written so as to conform with
Netscapes SSL.
This library is free for commercial and non-commercial use as long as the following conditions are aheared to. The following conditions apply to
all code found in this distribution, be it the RC4, RSA, lhash, DES, etc., code; not just the SSL code. The SSL documentation included with this
distribution is covered by the same copyright terms except that the holder is Tim Hudson (tjh@cryptsoft.com). Copyright remains Eric Young's,
and as such any Copyright notices in the code are not to be removed. If this package is used in a product, Eric Young should be given
attribution as the author of the parts of the library used. This can be in the form of a textual message at program startup or in documentation
(online or textual) provided with the package.
Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:
1. Redistributions of source code must retain the copyright notice, this list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the
documentation and/or other materials provided with the distribution.
3. All advertising materials mentioning features or use of this software must display the following acknowledgement: "This product includes
cryptographic software written by Eric Young (eay@cryptsoft.com)" The word 'cryptographic' can be left out if the rouines from the library
being used are not cryptographic related:-).
4. If you include any Windows specific code (or a derivative thereof) from the apps directory (application code) you must include an
acknowledgement: "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY
WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
The licence and distribution terms for any publically available version or derivative of this code cannot be changed. i.e. this code cannot simply
be copied and put under another distribution licence [including the GNU Public Licence.
Regulatory information_ 13
Download from Www.Somanuals.com. All Manuals Search And Download.
CHINA ONLY
Regulatory information_ 14
Download from Www.Somanuals.com. All Manuals Search And Download.
about this user’s guide
This user’s guide provides information about basic understanding of the machine as well as detailed explanation on each
step during actual usage. Valuable for both novice and professional users can refer to this as a guide for installing and
using the machine.
•
•
•
•
•
•
Read the safety information before using the machine.
If you have a problem using the machine, refer to the troubleshooting chapter. (See "Troubleshooting" on page 101.)
Terms used in this user’s guide are explained in the glossary chapter. (See "Glossary" on page 129.)
Use Index to find information.
All illustrations in this user’s guide may differ from your machine depending on its options or models.
The procedures in this user’s guide are mainly based on Windows XP.
CONVENTION
Some terms in this guide are used interchangeably, as below:
•
•
•
Document is synonymous with original.
Paper is synonymous with media, or print media.
Machine refers to printer or MFP.
The following table offers the conventions of this guide:
CONVENTION
DESCRIPTION
EXAMPLE
Bold
Note
For texts on the display or button names on the machine.
Start
Provides additional information or detailed specification of the machine function
and feature.
The date format may differ from country
to country.
Caution
Gives users information to protect the machine from possible mechanical
damage or malfunction.
Do not touch the green underside of the
toner cartridge.
Footnote
Provides additional more detailed information on certain words or a phrase.
Guides users to a reference page for the additional detailed information.
a. pages per minute
(“Cross-reference”)
About this user’s guide_ 15
Download from Www.Somanuals.com. All Manuals Search And Download.
FINDING MORE INFORMATION
You can find information for setting up and using your machine from the following resources, either as a print-out or on screen.
MATERIAL NAME
Quick Install Guide
DESCRIPTION
This guide provides information on setting up your machine and this requires that you follow the instructions in the guide to prepare the
machine.
Online User’s Guide This guide provides you with step-by-step instructions for using your machine’s full features, and contains information for maintaining
your machine, troubleshooting, and installing accessories.
Network Website
Driver Help
You can set the network environment from your computer using network-managing programs, such as SetIP, SyncThru™ Web Admin
download the SyncThru™ Web Admin Service on http://solution.samsungprinter.com. SetIP program is provided in the software CD.
This help provides you with help information on printer driver and instructions for setting up the options for printing. (See "Samsung tab"
Samsung website
If you have Internet access, you can get help, support, machine drivers, manuals, and order information from the Samsung website,
About this user’s guide_ 16
Download from Www.Somanuals.com. All Manuals Search And Download.
features of your new product
Your new machine is equipped with a number of special features that improve the quality of the documents you print.
SPECIAL FEATURES
Print with excellent quality and speed
* Zoran IPS Emulation compatible with PostScript 3:
•
•
•
You can print with a resolution of up to 1200 dpi effective
output.
Your machine prints A4-sized paper at up to 33 ppm and
letter-sized paper at up to 35 ppm.
For duplex printing, your machine prints A4-sized paper at
up to 17 ipm and letter-sized paper at up to 18 ipm.
©Copyright 1995-2005, Zoran Corporation. All rights reserved.
Zoran, the Zoran logo, IPS/PS3, and OneImage are trademarks
of Zoran Corporation.
136 PS3 fonts: Contains UFST and MicroType from
Monotype Imaging Inc.
Print in various environments
Handle many different types of printable material
•
•
You can print with various operating system such as
Windows, Linux and Macintosh systems.
Your machine is equipped with a USB interface and a
network interface.
•
The multi-purpose tray supports envelopes, labels,
custom-sized media, postcards, and heavy paper. The
multi-purpose tray holds up to 100 sheets of plain paper.
The 500-sheet tray 1 and 500-sheet optional tray support
plain paper in various sizes.
•
Copy originals in several formats
Create professional documents
•
•
•
Your machine can copy multiple image copies from the
original document on a single page. (See "2-up or 4-up
There are special functions to erase catalog and newspaper
background. (See "Erasing background images" on
•
Print Watermarks. You can customize your documents with
words, such as “Confidential”. (See "Using watermarks" on
Print Posters. The text and pictures of each page of your
document are magnified and printed across the sheet of
paper and can then be taped together to form a poster. (See
•
The print quality and image size may be adjusted and
enhance at the same time.
•
You can use preprinted forms and letterhead with plain
Scan the originals and send it right away
Save time and money
•
•
Scan in color and use the precise compressions of JPEG,
TIFF and PDF formats.
Quickly scan and send files to multiple destinations using
Networks scanning. (See "Sending a scanned image to
•
To save paper, you can print multiple pages on one single
sheet of paper. (See "Printing multiple pages on one sheet of
•
•
This machine automatically conserves electricity by
substantially reducing power consumption when not in use.
To save paper, you can print on both sides of the paper
(double-sided printing). (See "Printing on both sides of
Set a specific time to transmit a Fax
•
•
You can specify a certain time to transmit the fax and also
send the fax to several stored destinations.
After the transmission, the machine may print out the fax
reports according to the setting.
Expand your machine’s capacity
•
•
Your machine has an extra memory slot to expand their
Zoran IPS Emulation* compatible with PostScript 3 (PS)
enables PS printing.
Use USB flash memory devices
If you have a USB memory device, you can use it in various
ways with your machine.
•
•
You can scan documents and save them to the device.
You can directly print data stored to the device.
Features of your new product_ 17
Download from Www.Somanuals.com. All Manuals Search And Download.
Support XOA applications
The machine supports XOA custom applications.
•
Regarding the XOA custom applications, please contact
your XOA custom application provider.
FEATURES BY MODELS
The machine is designed to support all of your document needs from printing and copying to more advanced networking solutions for your business.
Features by models include:
FEATURES
SCX-5835NX
SCX-5935NX
USB 2.0
●
●
●
●
●
●
●
●
●
●
●
●
●
●
USB Memory Interface
Document Feeder
Hard Disk
Network Interface Ethernet 10/100 Base TX wired LAN
Duplex (2-sided) printing
FAX
( ●: Included, Blank: Not available)
Features of your new product_ 18
Download from Www.Somanuals.com. All Manuals Search And Download.
7.
introduction
These are the main components of your machine:
This chapter includes:
•
•
•
•
MACHINE OVERVIEW
Front view
Optional tray 2a
Tray 1
Scanner lock switch
Scanner glass
9
19
20
Document feeder cover
Multi-purpose tray
Front cover
1
2
11
12
Document feeder width
guides
10
a.Optional device.
Document feeder input tray
Document feeder output tray
Front cover handle
Document output tray
USB memory port
Control panel
3
4
5
6
13
14
15
16
Multi-purpose tray handle
Toner cartridge
Multi-purpose tray paper
width guides
Handle
7
8
17
18
Paper level indicator
Scanner lid
Introduction_ 19
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTROL PANEL OVERVIEW
Guides you to the machine setup and advanced settings. (See "Machine Setup" on page 85.)
Machine Setup
Job Status
Status
1
2
Shows jobs currently running, queued jobs and completed.
Displays machine’s current status and prompts during an operation. Set menus easily using the touch screen.
Dials fax number, and enters the number value for document copies or other options.
Deletes characters in the edit area.
3
Display screen
Numeric keypad
Clear
4
5
6
In standby mode, redials the last number. Also in edit mode, inserts a pause into a fax number.
Performs same as you hold a handset under the telephone line is engaged.
Stops a job in process to do an urgent copy job.
Redial/Pause
On Hook Dial
Interrupt
7
8
9
Reverts the current settings to default values.
Clear All
10
Sends the machine into power saver mode. You can also turn the power on and off with this button. (See "Power Saver
Power Saver
11
Stops an operation at any time. The pop-up window appears on the screen showing the current job that the user can stop or
resume.
Stop
Start
12
13
Starts a job.
When you use the touch screen, use your finger only. The screen may be damaged with a sharpen pen or anything else.
Introduction_ 21
Download from Www.Somanuals.com. All Manuals Search And Download.
UNDERSTANDING THE STATUS LED
INTRODUCING THE TOUCH SCREEN AND
USEFUL BUTTONS
The color of the status LED indicates the machine's current status.
Touch screen
STATUS
DESCRIPTION
The machine is off-line.
The machine is in power saver mode. When
data is received, or any button is pressed, it
switches to on-line automatically.
The touch screen on the control panel allows user-friendly operation of the
Off
•
•
machine. Once you press the home icon (
main screen.
) on the screen, it shows the
Green Blinking
•
•
When the backlight slowly blinks, the machine
is receiving data from the computer.
When the backlight blinks rapidly, the
machine is printing data.
On
Blinking
The machine is on-line and can be used.
Red
•
A minor error has occurred and the machine is
waiting for the error to be cleared. Check the
display message. When the problem is
cleared, the machine resumes.
•
The toner cartridge is near the end of its life.
Order a new toner cartridge. You can
temporarily improve print quality by
redistributing the toner. (See "Replacing the
•
•
: Shows Help. You can find the explanation by feature contents.
to use this menu, XOA applications should be installed. For more
information, contact your local Samsung dealer or the retailer where you
purchased your machine.
On
•
•
The toner cartridge is totally empty. Remove
the old toner cartridge and install a new one.
A paper jam has occurred. (See "Clearing
The cover is opened. Close the cover.
There is no paper in the tray. Load paper in
the tray.
The machine has stopped due to a major
error. Check the display message. (See
•
•
•
•
Copy: Enters the Copy menu.
Fax: Enters the Fax menu.
Scan: Enters Scan to Email, Scan to PC, Scan to Server menu.
Stored Documents: Enters the Stored Documents menu. (See
USB: When USB memory is inserted into the USB memory port on your
machine, USB icon shows on the display screen.
SmarThru Workflow: Enters the SmarThru Workflow menu.
•
•
•
•
(Optional)
•
•
•
Toner Info: Shows amount of toner used.
LCD Brightness: Adjusts the brightness of the touch screen.
•
•
•
: Changes the display language on the touch screen.
: This icon appears only when you connect a USB memory module.
Logout: Logs out from the currently logged-in account.
Check the message on the display screen. Follow the instructions in
the message or refer to troubleshooting part. (See "Understanding
display messages" on page 107.) If the problem persists, call for
service.
•
Icons shown on the display screen such as SmarThru Workflow
may be grayed out, depending on the optional kit or program
installed in your machine.
•
To switch the display screen and see other available icons, press
the left/right arrow on the display screen.
Introduction_ 22
Download from Www.Somanuals.com. All Manuals Search And Download.
Machine Setup button
When you press the Machine Setup button, you can browse current
machine settings or change machine values. (See "Machine Setup" on
page 85.)
XOA button
When you press this button, you can use the XOA applications from the
display screen. Before using the XOA applications, they should be
installed. If the XOA button is not displayed, make sure that the machine
gets XOA license. For more information, contact your local Samsung
dealer or the retailer where you purchased your machine.
•
: Allows you to move directly to the Copy, Fax, Scan, Stored
Documents menu directly.
•
•
•
Machine Status: Shows machine’s current status.
Admin Setting: Allows an administrator to set up the machine.
Usage Page Report: You can print the report on the given amount of
printouts depending on the paper size and type.
If the message asking Auth.ID, Password, and Realm Name, it
means the network administrator has set the authentication in
SyncThru™ Web Service. (See "Using SyncThru™ Web Service" on
page 93.)
Job Status button
When you press Job Status button, the screen lists the currently running,
queued and completed jobs.
Power Saver button
When the machine is not in use, save electricity by pressing the power save
mode button. Pressing this button for one second puts the machine into
power save mode. (See "Using power saving feature" on page 34.)
If you press this button for more than three seconds, a window appears,
requesting that you turn the power off. If you choose Yes, the power is
turned off. This button can also be used to turn the button on.
STATUS
On
DESCRIPTION
Off
The machine is not in the power save mode.
The machine is in the power save mode.
Blue
•
•
•
•
•
•
•
•
Current Job tab: Shows the list of jobs in progress and pending.
Completed Job tab: Provides the list of completed jobs.
Active Notice tab: Displays any error codes that have occurred.
No.: Gives the order of jobs.
Job Name: Shows job information, such as name and type.
Status: Gives the current status of each job.
User: Provides user name-mainly computer name.
Job Type: Displays details of the active job, such as job type, recipient
phone number and other information.
Detail: Shows detailed information of selected option on the Current
Interrupt button
When you press Interrupt button, the machine goes into interrupt mode,
which means it stops a printing job for urgent copy job. When the urgent
copy job completes, the previous printing job continues.
STATUS
DESCRIPTION
Off
The machine is not in interrupt printing
mode.
•
Job, Completed Job and Active Notice list.
Blue
On
The machine is in interrupt printing mode.
•
•
•
Delete: Removes selected job from the list.
Delete All: Removes all jobs from the list.
Close: Closes the job status window and switches to previous view.
Interrupt mode is resumed at default value (Off) after the machine is
shut down or reset.
Introduction_ 23
Download from Www.Somanuals.com. All Manuals Search And Download.
8.
getting started
This chapter gives you step-by-step instructions for setting up the USB connected machine and software.
This chapter includes:
•
•
•
•
•
2. Unpack the machine and check all the enclosed items.
3. Remove tape holding the machine securely.
4. Install the toner cartridge.
6. Make sure that all cables are connected to the machine.
7. Turn the machine on.
SETTING UP THE HARDWARE
This section shows the steps to set up the hardware, as is explained in the
Quick Install Guide. Make sure you read the Quick Install Guide first and
follow the steps below:
1. Select a stable location.
Select a level, stable place with adequate space for air circulation. Allow
extra space to open covers and trays.
SUPPLIED SOFTWARE
The area should be well ventilated and away from direct sunlight or
sources of heat, cold, and humidity. Do not set the machine close to the
edge of your desk or table.
After you have set up your machine and connected it to your computer, you
must install the printer software. If you are a Windows or Macintosh OS,
download the software from the Samsung website
(www.samsung.com/printer) and install.
Machine software are occasionally updated due to release of new
operating system and etc. If needed, download the latest version from
the Samsung website. (www.samsung.com/printer)
Printing is suitable for altitudes under 1,500 m (4,921 ft). Refer to the
altitude setting to optimize your printing. (See "Altitude adjustment" on
page 33.)
Place the machine on a flat, stable surface so that there is no incline
greater than 2 mm (0.08 inch). Otherwise, printing quality may be
affected.
Getting started_ 24
Download from Www.Somanuals.com. All Manuals Search And Download.
OS
CONTENTS
REQUIREMENT (RECOMMENDED)
OPERATING
SYSTEM
Windows
•
•
Printer driver: Use this driver to take full advantage of
your machine’s features.
PostScript printer driver: Use the PostScript driver to
print documents with complex fonts and graphics in the
PS language.
FREE HDD
SPACE
CPU
RAM
64 MB
Windows
2000
Pentium II 400 MHz
600 MB
(Pentium III 933 MHz)
(128 MB)
•
•
Scanner driver: TWAIN and Windows Image
Acquisition (WIA) drivers are available for scanning
documents on your machine.
Smart Panel: This program allows you to monitor the
machine’s status and alerts you when an error occurs
during printing.
SmarThru Officea: This program is the accompanying
Windows-based software for your multifunctional
machine.
Direct Printing Utility: This program allows you to
print PDF files directly.
Scan and Fax Manager 2: You can find out about
Scan and Fax Manager 2 program information and
installed scan driver's condition.
Windows XP
Pentium III 933 MHz
(Pentium IV 1 GHz)
128 MB
(256 MB)
1.5 GB
Windows
Server 2003
Pentium III 933 MHz
(Pentium IV 1 GHz)
128 MB
(512 MB)
1.25 GB to
2 GB
Windows
Vista
Pentium IV 3 GHz
512 MB
(1024 MB)
15 GB
10 GB
16 GB
•
Windows
Server 2008
Pentium IV 1 GHz
(Pentium IV 2 GHz)
512 MB
(2048 MB)
•
•
Windows 7
Pentium IV 1 GHz 32-bit
or 64-bit processor or
higher
1 GB (2
GB)
•
Support for DirectX 9 graphics with 128 MB memory
(to enable the Aero theme).
•
•
SetIP: Use this program to set your machine’s TCP/IP
addresses.
•
DVD-R/W Drive
Macintosh
PostScript Printer Description (PPD) file: Use this
file to run your machine from a Macintosh computer and
print documents.
Scanner driver: TWAIN driver is available for
scanning documents on your machine.
Smart Panel: This program allows you to monitor the
machine’s status and alerts you when an error occurs
during printing.
Scan and Fax Manager: You can find out about Scan
and Fax Manager program information and installed
scan driver's condition.
Windows
Server 2008
R2
Pentium IV 1 GHz (x86)
512 MB
(2048 MB)
10 GB
or 1.4 GHz (x64)
processors (2 GHz or
faster)
•
•
•
Internet Explorer 5.0 or higher is the minimum requirement for all
Windows operating systems.
•
•
Users who have an administrator right can install the software.
Windows Terminal Service is compatable with this machine.
•
Macintosh
Linux
•
•
Unified Linux Driver: Use this driver to take full
advantage of your machine’s features.
Printer Description (PPD) file: Use this file to run
your machine from a Linux computer and print
documents.
REQUIREMENTS (RECOMMENDED)
OPERATING
SYSTEM
FREE HDD
SPACE
CPU
Intel
Processors
PowerPC G4/
G5
RAM
•
•
SANE: Use this driver to scan documents.
Mac OS X
10.4 or lower
•
•
•
•
128 MB for a
PowerPC based
Mac (512 MB)
512 MB for a
Intel-based Mac
(1 GB)
1 GB
Smart Panel: This program allows you to monitor the
machine’s status and alerts you when an error occurs
during printing.
a.Allows you to edit a scanned image in various ways using a powerful
image editor and to send the image by email. You can also open
another image editor program, such as Adobe Photoshop, from
SmarThru Office . For details, refer to the on screen help supplied on
Mac OS X
10.5
•
•
Intel
Processors
867 MHz or
faster Power
PC G4/ G5
512 MB (1 GB)
1 GB
1 GB
SYSTEM REQUIREMENTS
Mac OS X
10.6
•
Intel
Processors
1 GB (2 GB)
Before you begin, ensure that your system meets the following
requirements:
Windows
Your machine supports the following Windows operating systems.
Getting started_ 25
Download from Www.Somanuals.com. All Manuals Search And Download.
Windows 2008 Server R2, click Run Setup.exe in Install or run
program field, and click Continue or Yes in the User Account
Control windows.
Linux
ITEM
REQUIREMENTS
RedHat 8.0, 9.0 (32bit)
RedHat Enterprise Linux WS 4, 5 (32/64bit)
Fedora Core 1~7 (32/64bit)
3. Click Next.
Operating
system
Mandrake 9.2 (32bit), 10.0, 10.1 (32/64bit)
Mandriva 2005, 2006, 2007 (32/64bit)
SuSE Linux 8.2, 9.0, 9.1 (32bit)
SuSE Linux 9.2, 9.3, 10.0, 10.1, 10.2 (32/64bit)
SuSE Linux Enterprise Desktop 9, 10 (32/64bit)
Ubuntu 6.06, 6.10, 7.04 (32/64bit)
Debian 3.1, 4.0 (32/64bit)
CPU
Pentium IV 2.4GHz (IntelCore2)
512 MB (1024 MB)
RAM
Free HDD space
1 GB (2GB)
•
•
It is necessary to claim swap partition of 300 MB or larger for
working with large scanned images.
The Linux scanner driver supports the optical resolution at
maximum.
If necessary, select a language from the drop-down list.
4. Select Typical installation for a local printer. and then click Next.
INSTALLING USB CONNECTED MACHINE’S
DRIVER
A locally connected machine is a machine directly attached to your
computer using the USB cable. If your machine is attached to a network,
skip the following steps below and go on to installing network connected
page 31.)
Selecting Custom installation allows you to choose programs to
install.
Only use an USB cable no longer then 3m (118 inch. ). Data might not
be transferred to your machine.
Windows
You can install the machine software using the typical or custom method.
The following steps below are recommended for most users who use a
machine directly connected to your computer. All components necessary for
machine operations will be installed.
If your machine is not already connected to the computer, the
following window will appear.
1. Make sure that the machine is connected to your computer and powered
on.
If the “New Hardware Wizard” window appears during the
installation procedure, click
in the upper right corner of the box
to close the window, or click Cancel.
2. Insert the supplied software CD into your CD-ROM drive.
•
The software CD should automatically run and an installation window
appear.
•
If the installation window does not appear, click Start and then Run.
Type X:\Setup.exe, replacing “X” with the letter which represents
your drive. Click OK.
•
•
If you use Windows Vista, Windows 7 and Windows 2008 Server R2
click Start > All programs > Accessories > Run.
Type X:\Setup.exe replacing “X” with the letter which represents
your drive and click OK.
•
After connecting the machine, click Next.
If the AutoPlay window appears in Windows Vista, Windows 7 and
Getting started_ 26
Download from Www.Somanuals.com. All Manuals Search And Download.
•
•
If you don’t want to connect the machine at this time, click
Next, and No on the following screen. The installation will then
start and a test page will not be printed at the end of the
installation.
The installation window that appears in this User’s Guide may
differ depending on the machine and interface in use.
•
For Mac OS X 10.5~10.6, open the Applications folder > System
Preferences and click Print & Fax.
12. Click Add on the Printer List.
•
For Mac OS X 10.5~10.6, click the “+” icon; a display window will pop
up.
13. For Mac OS X 10.3, select the USB tab.
5. After the installation is finished, a window asking you to print a test page
appears. If you choose to print a test page, select the checkbox and click
Next. Otherwise, just click Next and skip.
•
For Mac OS X10.4, click Default Browser and find the USB
connection.
For Mac OS X 10.5~10.6, click Default and find the USB connection.
•
6. If the test page prints out correctly, click Yes.
14. For Mac OS X 10.3, if Auto Select does not work properly, select
If not, click No to reprint it.
Samsung in Printer Model and your machine name in Model Name.
7. To register as a user of the machine in order to receive information from
Samsung, select the checkbox and click Finish. You are now registered
to the Samsung web site.
•
•
For Mac OS X 10.4, if Auto Select does not work properly, select
Samsung in Print Using and your machine name in Model.
For Mac OS X 10.5~10.6, if Auto Select does not work properly,
select Select a driver to use... and your machine name in Print
Using.
Otherwise, just click Finish.
If the printer driver does not work properly, uninstall the driver and
reinstall it.
Your machine appears on the Printer List, and is set as the default
machine.
For windows follow the steps below to uninstall the driver.
15. Click Add.
a) Make sure that the machine is connected to your computer and
powered on.
If the printer driver does not work properly, uninstall the driver and
reinstall it.
Follow steps below to uninstall the driver for Macintosh.
b) From the Start menu, select Programs or All Programs > your
printer driver name > Maintenance.
c) Select Remove and click Next.
You will see a component list so that you can remove any item
individually.
d) Select the components you want to remove and then click Next.
a) Make sure that the machine is connected to your computer and
powered on.
b) Insert the supplied software CD into your CD-ROM drive.
c) Double-click CD-ROM icon that appears on your Macintosh
desktop.
e) When your computer asks you to confirm your selection, click Yes.
The selected driver and all of its components are removed from
your computer.
f) After the software is removed, click Finish.
d) Double-click the MAC_Installer folder.
e) Double-click the Installer icon.
f) Enter the password and click OK.
g) The Samsung Installer window opens. Click Continue.
h) Select Uninstall and click Uninstall.
i) When the message which warns that all applications will close on
your computer appears, click Continue.
j) When the uninstall is done, click Quit.
Macintosh
The software CD that came with your machine provides you with the PPD
file that allows you to use the CUPS driver or PostScript driver (only
available when you use a machine which supports the PostScript driver) for
printing on a Macintosh computer.
Also, it provides you with the TWAIN driver for scanning on a Macintosh
computer.
Linux
You need to download Linux software package from the Samsung website
to install the printer softwares.
1. Make sure that the machine is connected to your computer and powered
on.
Follow the steps below to install the softwares.
2. Insert the supplied software CD into your CD-ROM drive.
3. Double-click the CD-ROM icon that appears on your Macintosh desktop.
4. Double-click the MAC_Installer folder.
Installing the Linux Unified Driver
1. Make sure that the machine is connected to your computer and
5. Double-click the Installer icon.
powered on.
6. Enter the password and click OK.
2. When the Administrator Login window appears, type in root in the
7. The Samsung Installer window opens. Click Continue.
Login field and enter the system password.
8. Select Easy Install and click Install. Easy Install is recommended for
most users. All components necessary for machine operations will be
installed.
If you select Custom Install, you can choose individual components to
install.
9. When the message which warns that all applications will close on your
You must log in as a super user (root) to install the machine
software. If you are not a super user, ask your system
administrator.
3. From the Samsung website, download the Unified Linux Driver
package to your computer.
4. Right click the Unified Linux Driver package and extract the
package.
5. Double click cdroot > autorun.
computer appears, click Continue.
10. After the installation is finished, click Quit.
If you have installed scan driver, click Restart.
11. Open the Applications folder > Utilities > Print Setup Utility.
Getting started_ 27
Download from Www.Somanuals.com. All Manuals Search And Download.
6. When the welcome screen appears, click Next.
driver. If you are not a super user, ask your system
administrator.
c) Click the icon at the bottom of the desktop. When the Terminal
screen appears, type in:
[root@localhost root]#cd /opt/Samsung/mfp/uninstall/
[root@localhost uninstall]#./uninstall.sh
d) Click Uninstall.
e) Click Next.
f) Click Finish.
SHARING YOUR MACHINE LOCALLY
Follow the steps below to set up the computers to share your machine
locally.
If the Host computer is directly connected to the machine with USB cable
and is also connected to the local network environment, the client computer
connected to the local network can use the shared machine through the
host computer to print.
7. When the installation is complete, click Finish.
The installation program has added the Unified Driver Configurator
desktop icon and the Unified Driver group to the system menu for your
convenience. If you have any difficulties, consult the on screen help that
is available through your system menu or can otherwise be called from
the driver package Windows applications, such as Unified Driver
Configurator or Image Manager.
Installing the SmartPanel
1. Make sure that the machine is connected to your computer and
powered on.
2. When the Administrator Login window appears, type in root in the
Login field and enter the system password.
Host computer
A computer which is directly connected to
the machine by USB cable.
1
2
You must log in as a super user (root) to install the machine
software. If you are not a super user, ask your system
administrator.
Client computers
Computers which use the machine shared
through the host computer.
3. From the Samsung website, download the Smart Panel package to
your computer.
Windows
4. Right click the Smart Panel package and extract the package.
Setting up a host computer
5. Double click cdroot > Linux > smartpanel > install.sh.
Installing the Printer Setting Utility
1. Make sure that the machine is connected to your computer and
2. Click the Windows Start menu.
powered on.
3. For Windows 2000, select Settings > Printers.
2. When the Administrator Login window appears, type in root in the
Login field and enter the system password.
•
•
For Windows XP/2003, select Printers and Faxes.
For Windows 2008/Vista, select Control Panel > Hardware and
Sound > Printers.
For Windows 7, select Control Panel > Hardware and Sound >
Devices and Printers.
For Windows Server 2008 R2, select Control Panel > Hardware
> Devices and Printers.
You must log in as a super user (root) to install the machine
software. If you are not a super user, ask your system
administrator.
•
•
3. From the Samsung website, download the Printer Setting Utility
package to your computer.
4. Right click the Printer Setting Utility package and extract the
4. Right click your printer icon.
5. For Windows XP/2003/2008/Vista, press Properties.
package.
5. Double click cdroot > Linux > psu > install.sh.
For Windows 7 and Windows Server 2008 R2, from context menus,
select the Printer properties.
If the printer driver does not work properly, uninstall the driver and
reinstall it.
Follow the steps below steps to uninstall the driver for Linux.
If Printer properties item has ► mark, you can select other
printer drivers connected with selected printer.
a) Make sure that the machine is connected to your computer and
powered on.
6. Select the Sharing tab.
b) When the Administrator Login window appears, type in “root”
7. Check the Change Sharing Options.
8. Check the Share this printer.
9. Fill in the Share Name field. Click OK.
in the Login field and enter the system password.
You must log in as a super user (root) to uninstall the printer
Getting started_ 28
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up a client computer
2. Click the Windows Start menu.
3. Select All programs > Accessories > Window Explorer.
4. Enter in IP address of the host computer and press Enter in your
keyboard.
In case host computer requires User name and Password, fill
in User ID and password of the host computer account.
5. Right click the printer icon you want to share and select Connect.
6. If a set up complete message appears, click OK.
7. Open the file you want to print and start printing.
Macintosh
The following steps are for Mac OS X 10.5~10.6. Refer to Mac Help
for other OS versions.
Setting up a host computer
2. Open the Applications folder > System Preferences and click
Print & Fax.
3. Select the printer to share in the Printers list.
4. Select “Share this printer”.
Setting up a client computer
2. Open the Applications folder > System Preferences and click
Print & Fax.
3. Press the “+” icon.
A display window showing the name of your shared printer appears.
4. Select your machine and click Add.
Getting started_ 29
Download from Www.Somanuals.com. All Manuals Search And Download.
9.
network setup
This chapter gives you step-by-step instructions for setting up the network connected machine and software.
This chapter includes:
•
•
•
•
SyncThru™ Web Service
NETWORK ENVIRONMENT
Web server embedded on your network machine server. If you login with
administrator’s ID and password on the web server, it allows you to:
You can use network after connecting network cable to a corresponding
port on your machine.
•
Configure the network parameters necessary for the machine to connect
to various network environments.
•
Customize machine settings.
SyncThru™ Web Admin Service
Web-based machine management solution for network administrators.
SyncThru™ Web Admin Service provides you with an efficient way of
network machines from any site with corporate internet access. Download
this program from http://solution.samsungprinter.com.
You need to set up the network protocols on the machine to use it as your
network machine. You can set up the basic network settings through the
machine's control panel.
The following table shows the network environments supported by the
machine:
SetIP
This utility program allows you to select a network interface and manually
configure the IP addresses for use with the TCP/IP protocol. (See "Using
ITEM
REQUIREMENTS
Ethernet 10/100 Base-TX
Network interface
CONFIGURING TCP/IP
Network operating system
•
•
Novell NetWare 5.x, 6.x (TCP/IP Only)
Windows
2000/XP/2003/2008/Vista/7/2008
Server R2
Various Linux OS
When you connect your machine to a network, you must first configure the
TCP/IP settings for the machine. After you have assigned and verified the
TCP/IP settings, you are ready to install the software on each computer on
the network.
•
•
Mac OS X 10.3 ~ 10.6
Setting the network address
Network protocols
•
•
•
•
•
TCP/IP on Windows
IPP
DHCP
SNMP
BOOTP
Contact the network administrator if you are not sure how to configure.
You can set up TCP/IP network parameters, follow the steps below:
1. Connect your machine to the network with an RJ-45 Ethernet cable.
2. Turned on the machine.
3. Press Machine Setup on the control panel.
4. Press Admin Setting.
5. When the login message appears, enter password.
If you want to setup DHCP network protocol, go to the
http://developer.apple.com/networking/bonjour/download/, select the
program Bonjour for Windows due to your computer operating system,
parameter automatically. Follow the instruction in the installation
window. This program does not support Linux.
Touch the password input area, then the question marks appears. Use
the number keypad on the control panel to enter the password. Once the
password is entered, press OK. (Factory setting:1111)
6. Press the Setup tab > Network Setup.
7. Select TCP/IP Protocol.
8. Press IP Setting.
INTRODUCING USEFUL NETWORK PROGRAMS
9. Select Static and then enter IP Address, Subnet Mask and Gateway
address fields. Touch the input area, then enter addresses by number
keypad on the control panel.
There are several programs available to setup the network settings easily in
network environment. For the network administrator especially, managing
several machines on the network is possible.
10. Press OK.
Network setup_ 30
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Select Typical installation for a network printer and then click Next.
INSTALLING NETWORK CONNECTED
MACHINE’S DRIVER
Selecting Custom installation allows you to choose programs to
install.
Windows
You can set up the machine driver, follow the steps below.
This is recommended for most users. All components necessary for
machine operations will be installed.
1. Make sure that the machine is connected to your network and powered
on. Also, your machine’s IP address should have been set. For details
about connecting to the network, see the supplied machine’s Quick
Install Guide.
2. Insert the supplied software CD into your CD-ROM drive.
•
The software CD should automatically run and an installation window
appear.
•
If the installation window does not appear, click Start and then Run.
Type X:\Setup.exe, replacing “X” with the letter which represents
your drive. Click OK.
5. The list of machines available on the network appears. Select the
machine you want to install from the list and then click Next.
•
•
If you use Windows Vista, Windows 7 and Windows 2008 Server R2,
click Start > All programs > Accessories > Run.
Type X:\Setup.exe replacing “X” with the letter which represents
your drive and click OK.
If the AutoPlay window appears in Windows Vista, Windows 7 and
Windows 2008 Server R2, click Run Setup.exe in Install or run
program field, and click Continue or Yes in the User Account
Control windows.
3. Click Next.
•
•
If you click the Advanced button, you can search a printer with
the SNMP Community Name. Default name is ‘public’.
If you do not see your machine on the list, click Update to
refresh the list, or select Add TCP/IP Port to add your machine
to the network. To add the machine to the network, enter the
port name and the IP address for the machine. To verify your
machine’s IP address or the MAC address, print a Network
Configuration page.
•
•
To find a shared machine (UNC Path), select Shared Printer
[UNC] and enter the shared name manually or find a shared
printer by clicking the Browse button.
If you cannot find your machine in network,turn off the firewall
and click Update. For Windows operating system, click Start >
Control Panel > Windows Firewall, and inactivate this option.
For other operating system, refer to its on-line guide.
If necessary, select a language from the drop-down list.
6. After the installation is finished, a window asking you to print a test page
appears. If you choose to print a test page, select the checkbox and click
Next. Otherwise, just click Next and skip.
7. If the test page prints out correctly, click Yes.
If not, click No to reprint it.
Network setup_ 31
Download from Www.Somanuals.com. All Manuals Search And Download.
8. To register as a user of the machine in order to receive information from
Samsung, select the checkbox and click Finish. You are now registered
to the Samsung web site.
•
•
For Mac OS X 10.4, if Auto Select does not work properly, select
Samsung in Print Using and your machine name in Model.
For Mac OS X 10.5~10.6, if Auto Select does not work properly,
choose Select a driver to use... and your machine name in Print
Using.
Otherwise, just click Finish.
If the printer driver does not work properly, uninstall the driver and
reinstall it.
For windows follow the steps below to uninstall the driver.
Your machine’s IP address appears on the Printer List, and is set as
the default machine.
18. Click Add.
a) Make sure that the machine is connected to your computer and
powered on.
b) From the Start menu, select Programs or All Programs > your
If the printer driver does not work properly, uninstall the driver and
reinstall it.
Follow steps below to uninstall the driver for Macintosh.
printer driver name > Maintenance.
c) Select Remove and click Next.
a) Make sure that the machine is connected to your computer and
powered on.
b) Insert the supplied software CD into your CD-ROM drive.
You will see a component list so that you can remove any item
individually.
d) Select the components you want to remove and then click Next.
e) When your computer asks you to confirm your selection, click Yes.
c) Double-click CD-ROM icon that appears on your Macintosh
desktop.
d) Double-click the MAC_Installer folder.
e) Double-click the Installer icon.
The selected driver and all of its components are removed from
your computer.
f) After the software is removed, click Finish.
f) Enter the password and click OK.
g) The Samsung Installer window opens. Click Continue.
h) Select Uninstall and click Uninstall.
Macintosh
1. Make sure that the machine is connected to your network and powered
i) When the message which warns that all applications will close on
on. Also, your machine’s IP address should have been set.
your computer appears, click Continue.
2. Insert the supplied software CD into your CD-ROM drive.
3. Double-click the CD-ROM icon that appears on your Macintosh desktop.
4. Double-click the MAC_Installer folder.
j) When the uninstall is done, click Quit.
Linux
5. Double-click the Installer icon.
6. Enter the password and click OK.
7. The Samsung Installer window opens. Click Continue.
8. Select Easy Install and click Install. Easy Install is recommended for
most users. All components necessary for machine operations will be
installed.
If you select Custom Install, you can choose individual components to
install.
9. When the message which warns that all applications will close on your
computer appears, click Continue.
10. After the installation is finished, click Quit.
Install Linux Driver
1. Make sure that the machine is connected to your network and
powered on. Also, your machine’s IP address should have been set.
2. From the Samsung website, download the Unified Linux Driver
package to your computer.
3. Right click the Unified Linux Driver package and extract the
package.
4. Double click cdroot > autorun.
5. The Samsung Installer window opens. Click Continue.
6. The Add printer wizard window opens. Click Next.
7. Select Network printer and click Search button.
8. The Printer’s IP address and model name appears on list field.
9. Select your machine and click Next.
If you have installed scan driver, click Restart.
11. Open the Applications folder > Utilities > Print Setup Utility.
•
For Mac OS X 10.5~10.6, open the Applications folder > System
Preferences and click Print & Fax.
10. Input the printer description and Next
11. When the add printer is done, click Finish
12. When the install is done, click Finish
12. Click Add on the Printer List.
•
For Mac OS X 10.5~10.6, click the “+” icon; a display window will pop
up.
Add network Printer
1. Double-click the Unified Driver Configurator.
13. For Mac OS X 10.3, select the IP Printing tab.
2. Click Add Printer…
•
•
For Mac OS X 10.4, click IP Printer.
For Mac OS X 10.5~10.6, click IP.
3. The Add printer wizard window opens. Click Next.
4. Select Network printer and click the Search button.
5. The printer’s IP address and model name appears on list field.
6. Select your machine and click Next.
14. Select Socket/HP Jet Direct in Printer Type.
When printing a document containing many pages, printing performance
may be enhanced by choosing Socket for Printer Type option.
15. Enter the machine’s IP address in the Printer Address field.
7. Input the printer description and Next
8. When the add printer is done, click Finish.
16. Enter the queue name in the Queue Name field. If you cannot determine
the queue name for your machine server, try using the default queue
first.
17. For Mac OS X 10.3, if Auto Select does not work properly, select
Samsung in Printer Model and your machine name in Model Name.
Network setup_ 32
Download from Www.Somanuals.com. All Manuals Search And Download.
10.
basic setup
After installation is complete, you may want to set the machine’s default settings. Refer to the next section if you would like
to set or change values. This chapter gives you step-by-step instructions for setting up the machine.
This chapter includes:
•
•
•
•
•
•
•
•
•
•
•
3. When the login message appears, enter password with the number
keypad on the control panel to enter the password. Then, press OK.
(Factory setting:1111)
4. Press the Setup tab > Authentication.
5. Press Change Admin. Password.
6. Enter old and new password, and then confirm the new password.
7. Press OK.
ALTITUDE ADJUSTMENT
The print quality is affected by atmospheric pressure, which is determined
by the height of the machine above sea level. The following information will
guide you on how to set your machine to the best print quality or best quality
of print.
Before you set the altitude value, find the altitude where you are using the
machine.
SETTING THE DATE AND TIME
When you set the time and date, they are used in delay fax and delay print.
They are printed on reports. If, however, they are not correct, you need to
change it for the correct time being.
If the machine’s power is cut off, you need to reset the correct time
and date once the power has been restored.
1. Press Machine Setup on the control panel.
2. Press Admin Setting.
1 Normal
3. When the login message appears, enter password with number keypad
2 High 1
0
1. Turn your networked computer on and open the web browser.
2. Enter your machine's IP address as the URL in a browser.
3. Click Go to access the SyncThru™ Web Service.
4. Click Machine Settings.
4. Press the General tab > Date & Time > Date & Time.
5. Select date and time using left/right arrows. Or touch the insert area and
use the numeric keypad on the control panel.
6. Press OK.
5. Click Altitude Adj.
6. Select the appropriate altitude value.
7. Click Apply.
To change the format of date and time, press Date Format and Time
Format.
If your machine is connected via a USB cable, set the altitude in
Altitude Adjustment option on the machine’s display screen. (See
CHANGING THE DISPLAY LANGUAGE
To change the language that appears on the display, follow the steps below:
1. Press Machine Setup on the control panel.
2. Press Admin Setting.
3. When the login message appears, enter password with number keypad
4. Press the General tab.
5. Press the down arrow to switch the screen and press Language.
6. Select the appropriate language.
7. Press OK.
SETTING THE AUTHENTICATION PASSWORD
To set up your machine or change the settings, you must first login. To
change password, follow the steps below:
1. Press Machine Setup on the control panel.
2. Press Admin Setting.
Basic setup_ 33
Download from Www.Somanuals.com. All Manuals Search And Download.
In the control panel
1. Press Machine Setup on the control panel.
2. Press Admin Setting.
3. When the login message appears, enter password with number keypad
4. Press the General tab.
5. Press the down arrow to switch the screen and press Tray
CHANGING THE COUNTRY
You can change the country, then some the values for fax and paper size
will be changed automatically for your country.
1. Press Machine Setup on the control panel.
2. Press Admin Setting.
3. When the login message appears, enter password with number keypad
4. Press the General tab.
5. Press the down arrow to switch the screen and press Country.
6. Select the desired country.
7. Press OK.
Management.
6. Select tray and its options, such as paper size and type.
7. Press OK.
If the optional tray is not installed, the tray options on the screen are
grayed out.
In the computer
SETTING JOB TIMEOUT
Windows
1. Click the Windows Start menu.
2. For Windows 2000, select Settings > Printers.
When there is no input for a certain period of time, the machine exits the
current menu and goes in to the default settings. You can set the amount of
time the machine will wait.
1. Press Machine Setup on the control panel.
2. Press Admin Setting.
•
•
For Windows XP/2003, select Printers and Faxes.
For Windows 2008/Vista, select Control Panel > Hardware and
Sound > Printers.
3. When the login message appears, enter password with number keypad
4. Press the General tab.
5. Press Timers.
•
•
For Windows 7, select Control Panel > Hardware and Sound >
Devices and Printers.
For Windows Server 2008 R2, select Control Panel > Hardware
> Devices and Printers.
6. Select appropriate option.
3. Right-click your machine.
4. For Windows XP/2003/2008/Vista, press Printing Preferences.
•
System Timeout: The machine returns to the default value after
certain time the machine waits. The maximum time you can set is10
minutes.
For Windows 7 and Windows Server 2008 R2, from context menus,
select the Printing Preferences.
•
Held Job Timeout: When error occurs while printing and there is no
signal from the computer, the machine holds a job for a specific time
period. You can set a time period for at least an hour.
If Printing Preferences item has ► mark, you can select other
printer drivers connected with selected printer.
7. Select On.
8. Select a duration using left/right arrows.
9. Press OK.
5. Click Paper tab.
6. Select tray and its options, such as paper size and type.
7. Press OK.
Macintosh
USING POWER SAVING FEATURE
Macintosh does not support this function. Macintosh users need to
change the default setting manually each time they want to print using
other settings.
When you are not using the machine for a while, use this feature to save
power.
1. Press Machine Setup on the control panel.
2. Press Admin Setting.
3. When the login message appears, enter password with number keypad
4. Press the General tab.
5. Press down arrow to switch the screen. Press Power Saver.
6. Press Power Save.
1. Open a Macintosh application and select the file you want to print.
2. Open the File menu and click Print.
3. Go to Paper Feed pane.
4. Set appropriate tray from which you want to print.
5. Go to Paper pane.
6. Set paper type to correspond to the paper loaded in the tray from
which you want to print.
7. Select appropriate time.
7. Click Print to print.
8. Press OK.
CHANGING THE DEFAULT SETTINGS
SETTING THE DEFAULT TRAY AND PAPER
You can set the default values for copy, fax, email, scan and paper all at
once.
You can select the tray and paper you would like to keep using for printing
1. Press Machine Setup on the control panel.
2. Press Admin Setting.
Basic setup_ 34
Download from Www.Somanuals.com. All Manuals Search And Download.
3. When the login message appears, enter password with number keypad
4. Press the General tab > Default Settings > Default Option.
Deletes the character on the left side of the
cursor.
Backspace
Delete
2
3
Deletes the character on the right side of the
cursor.
5. Press the function you want to change, and change its settings.
For example, if you want to change the default brightness & darkness
setting for a copy job, press Copy > Darkness and adjust the brightness
& darkness.
Deletes all characters in the input area.
Enters letters within this line.
Clear
4
5
Input area
6. Press OK.
Toggles between lowercase keys and uppercase
keys or vice versa.
Shift
6
7
CHANGING THE FONT SETTING
Switches from the alphanumeric keyboard to the
symbol keyboard.
Symbols
Your machine has preset the font for your region or country.
If you want to change the font or set the font for special condition, such as
the DOS environment, you can change the font setting as follows:
Enters a blank between characters.
Saves and closes input result.
Cancels and closes input result.
Space
OK
8
9
1. Turn your networked computer on and open the web browser.
2. Enter your machine's IP address as the URL in a browser.
3. Click Go to access the SyncThru™ Web Service.
4. Click Machine Settings.
5. Click PCL.
6. Select your preferred font in the Symbol Set list.
7. Click Apply.
Cancel
10
When you enter an email address, the email keyboard for email pops
up. After you enter the address, press OK to activate entered address.
Press the arrow key on the side for rotating between From, To, Cc,
Bcc, Subject, Message.
Following information shows the proper font list for corresponding
languages.
•
•
•
•
Russian: CP866, ISO 8859/5 Latin Cyrillic
Hebrew: Hebrew 15Q, Hebrew-8, Hebrew-7 (Israel only)
Greek: ISO 8859/7 Latin Greek, PC-8 Latin/Greek
Arabic & Farsi: HP Arabic-8, Windows Arabic, Code Page 864,
Farsi, ISO 8859/6 Latin Arabic
•
OCR: OCR-A, OCR-B
UNDERSTANDING THE KEYBOARD
You can enter alphabet characters, numbers, or special symbols using the
keyboard on the touch screen. This keyboard is the same as a normal
keyboard for easy usability.
Touch the input area where you need to enter characters, then the keyboard
pops up on the screen. The keyboard below is the default showing the
lowercase letters.
Moves the cursor between characters in the input
area.
Left/Right
1
Basic setup_ 35
Download from Www.Somanuals.com. All Manuals Search And Download.
11.
media and tray
This chapter provides information on how to load originals and print media into your machine.
This chapter includes:
•
•
•
•
•
•
•
•
1. Lift and open the scanner lid.
PREPARING ORIGINALS
•
Do not load paper smaller than 142 x 148 mm (5.6 x 5.8 inches) or
larger than 216 x 356 mm (8.5 x 14 inches).
•
Do not attempt to load the following types of paper, in order to prevent
paper jam, low print quality, machine damage.
-
-
-
-
-
-
Carbon-paper or carbon-backed paper
Coated paper
Onion skin or thin paper
Wrinkled or creased paper
Curled or rolled paper
Torn paper
•
•
Remove all staples and paper clips before loading.
Make sure any glue, ink, or correction fluid on the paper is completely
dry before loading.
•
•
Do not load originals that include different sizes or weights of paper.
Do not load booklets, pamphlets, transparencies, or documents with
other unusual characteristics.
2. Place the original face down on the scanner glass. And align it with the
registration guide at the top left corner of the glass.
LOADING ORIGINALS
You can use the scanner glass or the automatic document feeder to load an
original for copying, scanning, and sending a fax.
On the scanner glass
Make sure that no originals are in the document feeder. If an original is
detected in the document feeder, the machine gives it priority over the
original on the scanner glass. To get the best scan quality, especially for
colored or gray-scaled images, use the scanner glass.
3. Close the scanner lid.
•
Leaving the scanner lid open while copying may affect copy
quality and toner consumption.
•
Dust on the scanner glass may cause black spots on the
printout. Always keep it clean. (See "Cleaning the scan unit" on
page 99.)
•
If you are copying a page from a book or magazine, lift the
scanner lid until its hinges are caught by the stopper and then
Media and tray_ 36
Download from Www.Somanuals.com. All Manuals Search And Download.
close the lid. If the book or magazine is thicker than 30 mm,
start copying with the lid open.
SELECTING PRINT MEDIA
You can print on a variety of print media, such as plain paper, envelopes,
labels, and transparencies. Always use print media that meet the guidelines
for use with your machine.
•
•
Be careful not to break the scanner glass. You may get hurt.
Do not put hands while closing the scanner lid. The scanner lid
may fall on your hands and get hurt.
•
Do not look the light from inside of the scanner while copying or
scanning. It is harmful to eyes.
Guidelines to select the print media
Print media that does not meet the guidelines outlined in this user’s guide
may cause the following problems:
In the document feeder
•
•
•
Poor print quality
Increased paper jams
Premature wear on the machine.
Using the document feeder, you can load up to 50 sheets of paper (80 g/m2,
20 lb bond) for one job.
1. Flex or fan the edge of the paper stack to separate the pages before
Properties, such as weight, composition, grain, and moisture content, are
important factors that affect the machine’s performance and the output
quality. When you choose print materials, consider the following:
loading originals.
•
The type, size and weight of the print media for your machine are
described in print media specifications. (See "Print media specifications"
•
•
•
Desired outcome: The print media you choose should be appropriate for
your project.
Brightness: Some print media are whiter than others and produce
sharper, more vibrant images.
Surface smoothness: The smoothness of the print media affects how
crisp the printing looks on the paper.
2. Load the original face up into the document feeder. Make sure that the
bottom of the original stack matches the paper size marked on the
document input tray.
•
Some print media may meet all of the guidelines in this section and
still not produce satisfactory results. This may be the result of
improper handling, unacceptable temperature and humidity levels,
or other variables over which cannot be controled.
•
Before purchasing large quantities of print media, ensure that it
meets the requirements specified in this user’s guide.
Using print media that does not meet these specifications may cause
problems, requiring repairs. Such repairs are not covered by the
warranty or service agreements.
3. Adjust the document width guides to the paper size.
The amount of paper put into the tray may differ according to media type
used. (See "Print media specifications" on page 126.)
Media sizes supported in each mode
MODE
Copy mode
SIZE
SOURCE
All sizes supported by
the machine
•
•
tray 1 (Legal, US
Folio, Letter, A4,
Oficio, JIS B5, ISO
B5, Executive, A5)
Print mode
Fax mode
optional tray 2
(Legal, US Folio,
Letter, A4, Oficio,
JIS B5, ISO B5,
Executive, A5)
•
multi-purpose tray
Duplex printinga
Letter, A4, Legal, US
Folio, Oficio
•
•
•
tray 1
optional tray 2
multi-purpose tray
Dust on the document feeder glass may cause black lines on the
printout. Always keep the glass clean. (See "Cleaning the scan
a.75 to 90 g/m2 (20~24 lb bond) only
Media and tray_ 37
Download from Www.Somanuals.com. All Manuals Search And Download.
CHANGING THE TRAY SIZE
LOADING PAPER IN THE TRAY
Tray 1 / optional tray
The tray is preset to Letter or A4 size, depending on your country. To
change the size, you need to adjust the paper guides.
Load the print media you use for the majority of your print jobs into tray 1.
Tray 1 can hold a maximum of 500 sheets of plain paper.
1. Push the back plate of the tray outwards completely so that it can extend
the length of the tray.
You can purchase an optional tray and attach it below the standard tray to
load an additional 500 sheets of plain paper. (See "Available supplies" on
Using photographic paper or coated paper may cause problems,
requiring repairs. Such repairs are not covered by the warranty or
service agreements.
1. Pull out tray. And adjust the tray size to the media size you are loading.
2. Flex or fan the edge of the paper stack to separate the pages before
loading originals.
2. Squeeze the paper length guide and slide it to the correct position for the
paper size you are loading, which is marked at the bottom of the tray.
3. Place paper with the side you want to print facing down.
1 Paper length guide
3. Flex or fan the edge of the paper stack to separate the pages before
loading originals.
1 Paper limit mark
4. After inserting paper into the tray, squeeze the paper width guides and
2 Paper level
indicator
slide them to the desired paper size marked at the bottom of the tray.
Paper quantity indicator shows the amount of paper in the tray.
1 Paper width guide
1 Full
2 Empty
•
•
Do not push the paper width guide too far causing the media to
warp.
If you do not adjust the paper width guide, it may cause paper
jams.
4. When you print a document, set the paper type and size for the tray.
For information about setting the paper type and size on the control
•
If you experience problems with paper feeding, check whether
the paper meets the media specification. Then, try placing one
sheet at a time in the multi-purpose tray. (See "Print media
•
The settings made from the machine driver override the
settings on the control panel.
Media and tray_ 38
Download from Www.Somanuals.com. All Manuals Search And Download.
a) To print in application, open an application and start the print
menu.
3. Load the paper.
c) Press the Paper tab in Printing Preferences, and select an
appropriate paper type.
For example, if you want to use a label, set the paper type to
Label.
d) Select tray in paper source, then press OK.
e) Start printing in application.
Multi-purpose tray
The multi-purpose tray can hold special sizes and types of print material,
such as postcards, note cards, and envelopes. It is useful for single page
printing on colored paper.
4. Squeeze the multi-purpose tray paper width guides and adjust them
to the width of the paper. Do not force too much, or the paper will be
bent, which will bent resulting in a paper jam or skew.
Tips on using the multi-purpose tray
•
Load only one type, size and weight of print media at a time in the
multi-purpose tray.
•
To prevent paper jams, do not add paper while printing when there is
still paper in the multi-purpose tray. This also applies to other types
of print media.
•
•
Print media should be loaded face up with the top edge going into
the multi-purpose tray first and be placed in the center of the tray.
Always load the specified print media only to avoid paper jams and
print quality problems. (See "Print media specifications" on
page 126.)
•
Flatten any curl on postcards, envelopes, and labels before loading
them into the multi-purpose tray.
1. Hold the handle of multi-purpose tray and pull it down to open.
•
•
•
When printing the special media, you must follow the
loading guideline. (See "Printing on special media" on
When papers overlap when printing using Multi-purpose
tray, open tray 1 and remove overlapping papers then try
printing again.
When paper does not feed well while printing, push the
paper in manually until it starts feeding automatically.
5. When you print a document, set the paper type and size for the
multi-purpose tray.
For information about setting the paper type and size on the control
2. Flex or fan the edge of the paper stack to separate the pages before
The settings made from the machine driver override the
settings on the control panel.
loading originals.
a) To print in application, open an application and start the
print menu.
c) Press the Paper tab in Printing Preferences, and select
an appropriate paper type.
For example, if you want to use a label, set the paper type
to Label.
d) Select Manual Feeder in paper source, then press OK.
e) Start printing in application.
f) After printing, close the multi-purpose tray.
Media and tray_ 39
Download from Www.Somanuals.com. All Manuals Search And Download.
PRINTING ON SPECIAL MEDIA
The table below shows the available special media for each tray.
When using special media, we recommend you feed one paper at a
time. Check the maximum input number of media for each tray. (See
OPTIONAL
TRAY
MULTI-PURPOSE
TRAY
TYPES
Plain a
TRAY 1
O
O
O
O
O
O
1 Pressure lever
When selecting envelopes, consider the following factors:
Thicka
•
-
Weight: The weight of the envelope paper should not exceed
Thina
O
X
X
O
O
X
X
O
O
O
O
O
90 g/m2 otherwise, jam may occur.
Cotton
Color
-
Construction: Prior to printing, envelopes should lie flat with less
than 6 mm curl, and should not contain air.
-Condition: Envelopes should not be wrinkled, nicked, either
damaged.
Preprinteda
-
Temperature: Use envelopes that are compatible with the heat and
pressure of the machine during operation.
Recyclea
Envelope
Transparency
Labels
O
X
X
X
X
X
O
O
X
X
X
X
X
O
O
O
O
O
O
O
O
•
•
•
Use only well-constructed envelopes with sharp-and well-creased folds.
Do not use stamped envelopes.
Do not use envelopes with clasps, snaps, windows, coated lining,
self-adhesive seals, or other synthetic materials.
Do not use damaged or poorly made envelopes.
Be sure the seam at both ends of the envelope extends all the way to
the corner of the envelope.
•
•
CardStock
Bond
Archivea
a.A6, Statement are supported only in the multi-purpose tray.
1
2
Acceptable
Envelope
Successful printing on envelopes depends upon the quality of the
envelopes.
Unacceptable
•
Envelopes with a peel-off adhesive strip or with more than one flap that
folds over to seal must use adhesives compatible with the machine’s
fusing temperature for 0.1 second. To view the fusing temperature,
check your machine’s specification. (See "General specifications" on
page 122.) The extra flaps and strips might cause wrinkling, creasing, or
jams, and may even damage the fuser.
To print an envelope, place it flap side down with the stamp area on the top
left side.
•
•
For the best print quality, position margins no closer than 15 mm from
the edges of the envelope.
Avoid printing over the area where the envelope’s seams meet.
Transparency
To avoid damaging the machine, use only transparencies designed for use
in laser printers.
If you need to do the printing job with a wrinkled envelopes, open the rear
cover. And push the pressure lever on each side down.
Media and tray_ 40
Download from Www.Somanuals.com. All Manuals Search And Download.
•
Transparencies used in the machine must be able to withstand
machine’s fusing temperature.
Card stock/ Custom-sized paper
•
•
Place them on a flat surface after removing them from the machine.
Do not leave unused transparencies in the paper tray for long periods of
time. Dust and dirt may accumulate on them, resulting in spotty printing.
•
•
To avoid smudging caused by fingerprints, handle them carefully.
To avoid fading, do not expose printed transparencies to prolonged
sunlight.
•
Ensure that transparencies are not wrinkled, curled, or have any torn
edges.
•
•
Do not use transparencies that separates from the backing sheet.
To prevent transparencies from sticking to each other, do not let the
printed sheets stack up as they are begin printed out.
Recommended media: Transparency for a color laser printer by Xerox,
such as 3R 91331(A4), 3R 2780(Letter)
•
•
Do not print on media smaller than 76.2 mm (3 inches) wide or 127 mm
(4 inches) long.
In the software application, set margins at least 6.4 mm (0.25 inches)
away from the edges of the material.
•
Labels
Preprinted paper
When loading preprinted paper, printed side should be facing down with an
uncurled edge at the front. If you experience problems with paper feed, turn
the paper around. Note that print quality is not guaranteed.
To avoid damaging the machine, use only labels designed for use in laser
machines.
•
When selecting labels, consider the following factors:
-
Adhesives: The adhesive material should be stable at your
machine’s fusing temperature. Check your machine’s specification to
view the fusing temperature. (See "General specifications" on
page 122.)
Arrangement: Only use labels with no exposed backing between
them. Labels can peel off sheets that have spaces between the
labels, causing serious jams.
Curl: Prior to printing, labels must lie flat with no more than 13 mm
of curl in any direction.
Condition: Do not use labels with wrinkles, bubbles, or other
indications of separation.
•
Preprinted paper must be printed with heat-resistant ink that will not
melt, vaporize, or release hazardous emissions when subjected to the
machine’s fusing temperature for 0.1 second. Check your machine’s
specification to view the fusing temperature. (See "General
Preprinted paper ink must be non-flammable and should not adversely
affect machine rollers.
Before you load preprinted paper, verify that the ink on the paper is dry.
During the fusing process, wet ink can come off preprinted paper,
reducing print quality.
-
•
•
-
-
•
Make sure that there is no exposed adhesive material between labels.
Exposed areas can cause labels to peel off during printing, which can
cause paper jams. Exposed adhesive can also cause damage to
machine components.
Photo
•
Make sure not to use the inkjet photo paper with this machine. It could
cause damage to the machine.
•
•
Do not run a sheet of labels through the machine more than once. The
adhesive backing is designed for only a single pass through the
machine.
Do not use labels that are separating from the backing sheet or are
wrinkled, bubbled, or otherwise damaged.
Glossy
Load one paper to the multi-purpose tray at a time, glossy side facing
up.
•
•
Recommended media: Glossy paper (Letter) for this machine by HP
Brochure Paper (Product: Q6611A) only.
Recommended media: Glossy paper (A4) for this machine by HP
Superior Paper 160 glossy (Product: Q6616A).
Media and tray_ 41
Download from Www.Somanuals.com. All Manuals Search And Download.
SETTING THE PAPER SIZE AND TYPE
After loading paper in the paper tray, set the paper size and type using the
control panel. These settings will apply to copy and fax modes. For
computer printing, select the paper size and type in the application program
The settings made from the machine driver override the settings on
the control panel.
1. Press Machine Setup on the control panel.
2. Press Admin Setting.
3. When the login message appears, enter password with number keypad
4. Press the General tab.
5. Press the down arrow to switch the screen, press Tray Management.
6. Select tray and its options such as paper size and type.
7. Press OK.
If you want to use special-sized paper-such as a billing paper, select
USING THE OUTPUT SUPPORT
The surface of the output tray may become hot if you print a large
number of pages at once. Make sure that you do not touch the
surface, and do not allow children near it.
The printed pages stack on the output support, and the output support will
help the printed pages to align. Pull out the output support and expand it.
If paper coming out of the output try has problems, such as excessive
curl, try printing to the rear cover. The rear cover can only hold one
piece of paper at a time, do not let the papers stack on the rear cover.
Media and tray_ 42
Download from Www.Somanuals.com. All Manuals Search And Download.
12.
printing
This chapter explains common printing tasks.
This chapter includes:
•
•
•
•
•
•
•
•
•
•
•
The procedures in this chapter are mainly based on Windows XP.
FEATURE
WINDOWS
LINUX
MACINTOSH
Reduce and enlarge
printing
O
X
O
PRINTER DRIVER FEATURES
Your printer drivers support the following standard features:
Different source for first
page
X
X
O
•
•
Paper orientation, size, source, and media type selection
Number of copies
Watermark
Overlay
X
X
O
X
X
O
X
X
O
In addition, you can use various special printing features. The following
table shows a general overview of features supported by your printer
drivers:
Double-sided printing
(duplex)a
Some models or operating system may not support the certain
feature(s) in the following table.
a.The machine with Duplex feature prints both side of a paper.
PCL printer driver
BASIC PRINTING
FEATURE
WINDOWS
Your machine allows you to print from various Windows, Macintosh, or
Linux applications. The exact steps for printing a document may vary
depending on the application you use.
Machine quality option
Poster printing
O
O
O
O
O
O
O
O
O
•
Your Printing Preferences window that appears in this user’s
guide may differ depending on the machine in use. However, the
composition of the Printing Preferences window is similar. Check
the operating system(s) that are compatible with your machine.
Refer to the OS compatibility section of Printer Specifications .
Multiple pages per sheet
Fit to page printing
Reduce and enlarge printing
Different source for first page
Watermark
•
When you select an option in Printing Preferences, you may see
a warning mark,
you can select that certain option but it is not recommended, and
) mark means you cannot select that option due to the
machine’s setting or environment.
, or
. An exclamation mark (
) means
Overlay
Double-sided printing (duplex)
(
PostScript printer driver
The following procedure describes the general steps required for printing
from various Windows applications.
FEATURE
WINDOWS
LINUX
MACINTOSH
Machine quality option
Poster printing
O
X
O
X
O
X
The following Printing Preferences window is for Notepad in Windows XP.
Your Printing Preferences window may differ, depending on your
operating system or the application you are using.
Multiple pages per sheet
O
O
O
(2, 4)
1. Open the document you want to print.
2. Select Print from the File menu. The Print window appears.
Fit to page printing
O
X
O
Printing_ 43
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Select your machine from the Select Printer list.
•
•
•
•
Printing multiple pages on one sheet of paper
You can select the number of pages to print on a single sheet of paper. To
print more than one page per sheet, the pages will be reduced in size and
arranged in the order you specify. You can print up to 16 pages on one
sheet.
1. To change the print settings from your software application, access
page 47.)
2. Click the Basic tab, select Multiple Pages per Side in the Type
drop-down list.
3. Select the number of pages you want to print per sheet
(2, 4, 6, 9, or 16) in the Pages per Side drop-down list.
4. Select the page order from the Page Order drop-down list, if necessary.
5. Check Print Page Border to print a border around each page on the
The basic print settings including the number of copies and print range
are selected within the Print window.
To take advantage of the printer features provided by your printer
driver, click Properties or Preferences in the application’s Print
window to change the print setting. (See "Understanding Printing
sheet.
6. Click the Paper tab, select the Size, Source, and Type.
7. Click OK or Print until you exit the Print window.
4. To start the print job, click OK or Print in the Print window.
Printing posters
This feature allows you to print a single-page document onto 4, 9, or 16
sheets of paper, for the purpose of pasting the sheets together to form one
poster-size document.
Canceling a print job
If the print job is waiting in a print queue or print spooler, cancel the job as
follows:
1. For Windows 2000, select Settings > Printers.
•
•
For Windows XP/2003, select Printers and Faxes.
For Windows 2008/Vista, select Control Panel > Hardware and
Sound > Printers.
•
•
For Windows 7, select Control Panel > Hardware and Sound >
Devices and Printers.
For Windows Server 2008 R2, select Control Panel > Hardware >
Devices and Printers.
1. To change the print settings from your software application, access
page 47.)
2. Click the Basic tab, select Poster Printing in the Type drop-down list.
3. Select the page layout you want.
2. For Windows 2000, XP, 2003, Vista and 2008, double-click your
machine.
For Windows 7 and Windows Server 2008 R2, right click your printer
icon > context menus > See what’s printing.
Specification of the page layout:
•
•
•
Poster 2x2: Document will be enlarged and be divided into 4 pages.
Poster 3x3: Document will be enlarged and be divided into 9 pages.
Poster 4x4: Document will be enlarged and be divided into 16
pages.
If See what’s printing item has ► mark, you can select other
printer drivers connected with selected printer.
3. From the Document menu, select Cancel.
You can also access this window by simply double-clicking the
4. Select the Poster Overlap value. Specify Poster Overlap in millimeters
or inches by selecting the radio button on the upper right of Basic tab to
make it easier to paste the sheets together.
machine icon (
) in the Windows task bar.
You can also cancel the current job by pressing Stop on the control
panel.
USING SPECIAL PRINT FEATURES
Special print features include:
5. Click the Paper tab, select the Size, Source, and Type.
6. Click OK or Print until you exit the Print window.
7. You can complete the poster by pasting the sheets together.
•
•
•
•
Printing_ 44
Download from Www.Somanuals.com. All Manuals Search And Download.
calendars.
Printing booklets
This feature prints your document on both sides of a paper and arranges the
pages so that the paper can be folded in half after printing to produce a
booklet.
If you want to make a booklet, you need to print on Letter, Legal, A4,
Us Folio, or Oficio sized print media.
9
8
•
Reverse Double-Sided Printing: Check this option to reverse the
print order when duplex printing.
4. Click the Paper tab, select the Size, Source, and Type.
5. Click OK or Print until you exit the Print window.
1. To change the print settings from your software application, access the
page 47.)
If your machine does not have a duplex unit, you should complete the
printing job manually. The machine prints every other page of the
document first. After that , a message appears on your computer.
Follow the on-screen instructions to complete the printing job.
2. Click the Basic tab, select Booklet Printing from the Type drop-down
list.
3. Click the Paper tab, select the Size, Source, and Type.
Change percentage of your document
You can change the size of a document to appear larger or smaller on the
printed page by typing in a percentage you want.
The Booklet Printing option is not available for all paper sizes. In
order to find out the available paper size for this feature, select the
available paper size in the Size option on the Paper tab.
If you select an unavailable paper size, this option can be
automatically canceled. Select only available paper. (paper without
or
mark).
4. Click OK or Print until you exit the Print window.
5. After printing, fold and staple the pages.
1. To change the print settings from your software application, access
page 47.)
Printing on both sides of paper
You can print on both sides of a paper; duplex. Before printing, decide how
you want your document oriented. You can only use this feature with Letter,
Legal, A4, US Folio, or Oficio sized paper.
2. Click the Paper tab.
3. Enter the scaling rate in the Percentage input box.
You can also click the up/down arrows to select the scaling rate.
4. Select the Size, Source, and Type in Paper Options.
5. Click OK or Print until you exit the Print window.
Do not print on both sides of the special media, such as labels,
envelopes, or thick paper to print on both sides of paper. It may cause
a paper jam or damage the machine.
Fitting your document to a selected paper size
This printer feature allows you to scale your print job to any selected paper
size regardless of the document size. This can be useful when you want to
check fine details on a small document.
1. To change the print settings from your software application, access
page 47.)
2. Click the Basic tab.
3. From the Double-sided Printing section, select the binding option you
want.
A
•
Printer Default: If you select this option, this feature is determined
by the setting you’ve made on the control panel of the machine.
•
•
None
Long Edge: This option is the conventional layout used in
bookbinding.
1. To change the print settings from your software application, access
page 47.)
2. Click the Paper tab.
3. Select the paper size you want from the Fit to page .
4. Select the Size, Source, and Type in Paper Options.
5. Click OK or Print until you exit the Print window.
•
Short Edge: This option is the conventional layout used in
Printing_ 45
Download from Www.Somanuals.com. All Manuals Search And Download.
Deleting a watermark
Using watermarks
The watermark option allows you to print text over an existing document.
For example, you use it when you want to have large gray letters reading
“DRAFT” or “CONFIDENTIAL” printed diagonally across the first page or all
pages of a document.
1. To change the print settings from your software application, access
page 47.)
2. Click the Advanced tab, select Edit from the Watermark drop-down
list. The Edit Watermarks window appears.
3. Select the watermark you want to delete from the Current
Watermarks list and click Delete.
4. Click OK or Print until you exit the Print window.
Using overlay
There are several predefined watermarks that come with the machine. They
can be modified, or you can add new ones to the list.
What is an overlay?
An overlay is text and/or images stored in the computer hard disk drive
(HDD) as a special file format that can be printed on any document.
Overlays are often used to take the place of letterhead paper. Rather
than using preprinted letterhead, you can create an overlay containing
exactly the same information that is currently on your letterhead. To print
a letter with your company’s letterhead, you do not need to load
preprinted letterhead paper in the machine just print the letterhead
overlay on your document.
Using an existing watermark
1. To change the print settings from your software application, access
page 47.)
2. Click the Advanced tab, and select the desired watermark from the
Watermark drop-down list. You will see the selected watermark in
the preview image.
3. Click OK or Print until you exit the print window.
Creating a watermark
1. To change the print settings from your software application, access
page 47.)
2. From the Advanced tab, select Edit from the Watermark drop-down
Creating a new page overlay
list. The Edit Watermarks window appears.
To use a page overlay, you must create a new page overlay containing
your logo or image.
3. Enter a text message in the Watermark Message box. You can
enter up to 256 characters. The message displays in the preview
window.
1. Create or open a document containing text or an image for use in a
new page overlay. Position the items exactly as you wish them to
appear when printed as an overlay.
When the First Page Only box is checked, the watermark prints on
the first page only.
2. To save the document as an overlay, access Printing Preferences.
4. Select watermark options.
3. Click the Advanced tab, and select Edit from the Text drop-down
You can select the font name, style, size, and shade from the Font
Attributes section, as well as set the angle of the watermark from
the Message Angle section.
list. Edit Overlay window appears.
5. Click Add to add a new watermark to the Current Watermaks list.
4. In the Edit Overlay window, click Create.
6. When you have finished editing, click OK or Print until you exit the
5. In the Save As window, type a name of up to eight characters in the
File name box. Select the destination path, if necessary. (The
default is C:\Formover.)
Print window.
To stop printing the watermark, select None from the Watermark
6. Click Save. The name appears on the Overlay List.
drop-down list.
7. Click OK or Print until you exit the Print window.
8. The file is not printed. Instead, it is stored on your computer hard disk
Editing a watermark
1. To change the print settings from your software application, access
page 47.)
drive.
The overlay document size must be the same as the document
you print with the overlay. Do not create an overlay with a
watermark.
2. Click the Advanced tab, select Edit from the Watermark drop-down
list. The Edit Watermarks window appears.
3. Select the watermark you want to edit from the Current Watermarks
list and change the watermark message and options.
4. Click Update to save the changes.
Using a page overlay
After an overlay has been created, it is ready to be printed with your
document. To print an overlay with a document:
5. Click OK or Print until you exit the Print window.
1. Create or open the document you want to print.
2. To change the print settings from your software application, access
page 47.)
3. Click the Advanced tab.
Printing_ 46
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Select the desired overlay from the Text drop-down list.
Basic tab
5. If the overlay file you want does not appear in theText drop-down
list, select Edit from the list and click Load. Select the overlay file
you want to use.
Use Basic tab to adjust how the document appear on the printed page.
Click the Basic tab to display the options shown below.
If you have stored the overlay file you want to use in an external
source, you can also load the file when you access the Load
Overlay window.
After you select the file, click Open. The file appears in the Overlay
List box and is available for printing. Select the overlay from the
Overlay List box.
6. If necessary, check Confirm Page Overlay When Printing box. If
this box is checked, a message window appears each time you
submit a document for printing, asking you to confirm your wish to
print an overlay on your document.
If this box is not checked and an overlay has been selected, the
overlay automatically prints with your document.
7. Click OK or Print until you exit the Print window.
The selected overlay prints on your document.
The resolution of the overlay document must be the same as that
of the document you will print with the overlay.
Deleting a page overlay
You can delete page overlays that you no longer use.
1. In the Printing Preferences window, click the Advanced tab.
2. Select Edit in the Overlay drop down list.
3. Select the overlay you want to delete from the Overlay List box.
4. Click Delete.
Orientation
This option allows you to select the direction in which information is
printed on a page.
5. When a confirming message window appears, click Yes.
6. Click OK or Print until you exit the Print window.
•
•
Portrait: This option prints across the width of the page, letter style.
Landscape: This option prints across the length of the page,
spreadsheet style.
UNDERSTANDING PRINTING PREFERENCES
•
Rotate 180 Degrees: This option allows you to rotate the page, 180
degrees.
You can preview the settings you selected on the upper right of the Printing
Preferences.
Quality
Opening Printing Preferences
1. Open the document you want to print.
2. Select Print from the File menu. The Print window appears.
3. Select your machine from the Select Printer.
4. Click Properties or Preferences.
The available Quality options may vary depending on your machine.
The higher the setting, the sharper the clarity of printed characters and
graphics. The higher setting may also increase the printing time of a
document.
Layout Options
This option allows you to select various ways to layout your document.
•
•
Single Page Per Side: This option is a basic layout option. This
option allows you to print a page on one side of a paper.
Multiple Pages Per Side: This option allows you to print several
pages on one side of a paper. (See "Printing multiple pages on one
•
•
Poster Printing: This option allows you to print your document into
a poster-size document. This option prints your document into
several pages. Paste printed pages together to form one poster-size
Booklet Printing: This option allows you to print your document on
both sides of the paper to make into a booklet. (See "Printing
Double-Sided Printing
This option allows you to print on both sides of paper. (See "Printing on
Printing_ 47
Download from Www.Somanuals.com. All Manuals Search And Download.
-
-
-
CardStock: 90 to 163 g/m2 (24 to 43 lb) cardstock.
Paper tab
Bond: 105 to 120 g/m2 (28 to 32 lb) bond.
Use the Paper tab options to set the basic paper handling specifications.
Click the Paper tab to display the options shown below.
Archive: 70 to 90 g/m2 (19 to 24 lb) If you need to keep the
print-out for a long period time, such as archives, select this
option.
•
Advanced: This option allows you to print the first page using a
different paper type from the rest of the document by choosing the
tray to use for printing the first page. For example, if you want to print
the first page using color paper, load color paper into the MP Tray,
and plain paper into Tray 1. Then, select Tray 1. in the Source
option and MP Tray in this Advanced option.
If you click Reset, settings in the Advanced option returns to
the default setting.
Scaling Options
This option allows you to automatically or manually scale your print job
on a page. This option can be grayed out according to the Layout
Options setting in the Basic tab.
•
Fit to Page: This option allows you to scale your print job to any
selected paper size regardless of the document size. (See "Fitting
•
Percentage: This option allows you to change the size of a page’s
contents to appear larger or smaller on the printed page by typing in
a percentage you want. (See "Change percentage of your
Graphics tab
Copies
Use the Graphic tab options to adjust the print quality for your specific
This option allows you to choose the number of copies to be printed.
You can select 1 to 999 copies.
printing needs.
Click the Graphic tab to display the options shown below.
Paper Options
This option allows you to choose paper tray you want to use.
When printing on an envelope, select the Envelope tab to set the
options.
•
•
Size: This option allows you to set the size of paper to be loaded in
the tray. This setting appears in the list, so that you can select it.
Source: Make sure that Source is set to the corresponding paper
tray.
Use MP Tray when printing on special materials, such as envelopes
and transparencies.
•
Type: This option allows you to set the type of paper to be loaded in
the tray. This setting appears in the list, so that you can select it. This
will let you get the best quality printout. If not, the desired print quality
may not be achieved.
-
Plain: Normal plain paper. Select this type if your machine is
monochrome and printing on the 60 G./m2 (16 lb) cotton paper.
Thick: 90 to 105 g/m2 (24 to 28 lb) thick paper.
-
-
-
Thin: 60 to 70 g/m2 (16 to 19 lb) thin paper.
Cotton: 75 to 90 g/m2 (20 to 24 lb) cotton paper such as Gilbert
25 % and Gilbert 100 %.
-
-
-
-
-
Color: 75 to 90 g/m2 (20 to 24 lb) color-backgrounded paper.
Preprinted: 75 to 90 g/m2 (20 to 24 lb) preprinted paper.
Recycled: 75 to 90 g/m2 (20 to 24 lb) recycled paper.
Envelope: 75 to 90 g/m2 (20 to 24 lb) envelope.
Font/Text
Check All Text Black box to print all the texts in your document in solid
black, regardless of the color it appears on the screen.
Transparency: 138 to 146 g/m2 (37 to 39 lb) transparency
Advanced
paper.
•
Download as Outline: This option allows the driver to download
any TrueType fonts that are used in your document not stored
-
Labels: 120 to 150 g/m2 (32 to 40 lb) label.
Printing_ 48
Download from Www.Somanuals.com. All Manuals Search And Download.
(resident) on your machine. If, after printing a document, you find
that the fonts did not print correctly, choose Download as Bit image
and resubmit your print job. This feature is available only when you
use the PCL printer driver.
Watermark
This option allows you to print text over an existing document. (See
•
•
Download as Bit Image: This option allows the driver to download
the font data as bitmap images. Documents with complicated fonts,
such as Korean or Chinese, or various other fonts, will print faster in
this setting. Download as bit image is useful when printing from
Adobe programs.
Print as Graphics: This option allows the driver to download any
fonts as graphics. When printing documents with high graphic
content and relatively few TrueType fonts, printing performance
(speed) may be enhanced in this setting.
Overlay
Overlays are often used to take the place of letterhead paper. (See
Output options
This options allows you to set the sequence in which the pages will print.
Select the print order from the drop-down list.
•
•
•
•
•
Normal: This option allows you to print all pages from the first page
to the last page.
Reverse All Pages: This option allows you to print all pages from
the last page to the first page.
Print Odd Pages: This option allows you to print only the odd
numbered pages of the document.
Print Even Pages: This option allows you to print only the even
numbered pages of the document.
Use Printer Fonts: When Use Printer Fonts is checked, the printer
uses the fonts that are stored in its memory (resident fonts) to print your
document, rather than downloading the fonts used in your document.
Because downloading fonts takes time, selecting this option can speed
up your printing time. When using Printer fonts, the printer will try to
match the fonts used in your document to those stored in its memory. If,
however, you use fonts in your document that are very different from
those resident in the printer, your printed output will appear very different
from what it looks like on the screen.
Advanced: This option allows you to set advanced output options
for printing, such as printing an information page, and saving as a
form to later use as an overlay.
If you click Reset, settings in the Advanced option returns to the
default setting.
If you click Reset, settings in the Advanced option returns to the
default setting.
Toner Save
Job Settings
This option allows you to extend the life of your toner cartridge and
reduces the cost per page without a significant reduction in print quality.
This option allows you to choose how to print or save the printing file by
using the optional HDD.
•
•
On: This option to allows the printer to use less toner on each page.
Off: If you do not need to save toner when printing a document,
select this option.
•
•
•
Print Mode: The default Print Mode is Normal which is for printing
without saving the printing file in the optional HDD.
User ID: This option is used when you need to find a saved file
using the control panel.
Job Name: This option is used when you need to find a saved file
using the control panel.
Advanced tab
Use the Advanced tab to set various printing options.
Click the Advanced tab to display the options shown below.
Samsung tab
Use the Samsung tab to display the copyright and the version number of
the driver. If your computer is connected to the Internet, you can have
access to following services:
Click the Samsung tab to display the options.
Help
This option allows you to open the Help file by searching a keyword.
Service
•
Buy Supplies: This option allows you to order supplies on-line.
•
Samsung Website: This option directly connects you to Samsung
Website.
•
•
Registration: This option allows you to register your machine.
Check for updates: This option allows you to download updates for
your printer driver.
Using a favorite setting
The Presets option, which is visible on each preferences tab except for
Samsung tab, allows you to save the current preferences settings for future
use.
To save a Presets item:
Printing_ 49
Download from Www.Somanuals.com. All Manuals Search And Download.
1. Change the settings as needed on each tab.
2. Enter a name for the item in the Presets input box.
What is Direct Printing Utility?
Direct Printing Utility is a program that sends a PDF file directly to your
machine to print without having to open the file. It sends data through the
Windows spooler using the port of the printer driver. It only supports PDF
format.
To install this program, select Custom installation and put a check mark in
this program when you install the printer driver.
Printing
There are several ways you can print using the Direct Printing Utility.
From the Direct Printing Utility window
1. From the Start menu select Programs or All Programs > Direct
Printing Utility > Direct Printing Utility.
Or, double-click the Direct Printing Utility shortcut icon on your
desktop.
The Direct Printing Utility window opens.
2. Select your machine from the Select Printer drop-down list and click
Browse.
3. Select the PDF file you wish to print and click Open.
The PDF file is added in the Select Files section.
4. Customize the machine settings for your needs.
5. Click Print. The selected PDF file is sent to the machine.
3. Click Save. When you save Presets, all current driver settings are
Using the shortcut icon
1. Select the PDF file you wish to print, drag and drop it to the Direct
Printing Utility shortcut icon on your desk top. The selected PDF file is
sent to the default machine.
saved.
To use a saved setting, select it from the Presets drop down list. The
machine is now set to print according to the setting you selected.
To delete saved setting, select it from the Presets drop down list and click
Delete.
You can also restore the printer driver’s default settings by selecting
Default Printer from the Presets drop down list.
If the default machine does not support Direct Printing Utility, the
message window alerting you to select the appropriate machine
opens. Select the appropriate machine in the Select Printer
section.
2. Customize the machine settings for your needs.
3. Click Print. The selected PDF file is sent to the machine.
Using help
Click
from the upper-right corner of the window, and then click on any
option. The help screen gives detailed information about the printing
features provided by the printer driver.
Using the right-click menu
1. Right-click on the PDF file you wish to print and select Direct Printing.
The Direct Printing Utility window opens with the PDF file is added.
2. Select the machine you wish to use.
USING DIRECT PRINTING UTILITY
3. Customize the machine settings for your needs.
4. Click Print. The selected PDF file is sent to the machine.
This chapter explains how to use the Direct Printing Utility to print PDF files
without having to open the files.
•
•
•
•
•
HDD should be installed on your machine, to print PDF files using
this program.
You cannot print PDF files that are restricted to print. Deactivate
the printing restriction feature, and retry printing.
You cannot print PDF files that are restricted by a password.
Deactivate the password feature, and retry printing.
Whether or not a PDF file can be printed using the Direct Printing
Utility program depends on how the PDF file was created.
CHANGING THE DEFAULT PRINT SETTINGS
1. Click the Windows Start menu.
2. For Windows 2000, select Settings > Printers.
•
•
For Windows XP/2003, select Printers and Faxes.
For Windows 2008/Vista, select Control Panel > Hardware and
Sound > Printers.
The Direct Printing Utility program supports the PDF version
1.4 and below. For a higher version, you must open the file to print
it.
•
•
For Windows 7, select Control Panel > Hardware and Sound >
Devices and Printers.
For Windows Server 2008 R2, select Control Panel > Hardware >
Devices and Printers.
3. Right-click your machine.
4. For Windows XP/2003/2008/Vista, press Printing Preferences.
For Windows 7 and Windows Server 2008 R2, from context menus,
Printing_ 50
Download from Www.Somanuals.com. All Manuals Search And Download.
select the Printing preferences.
Printing a document
When you print with a Macintosh, you need to check the printer driver
setting in each application you use. Follow the steps below to print from a
Macintosh:
If Printing preferences item has ► mark, you can select other
printer drivers connected with selected printer.
5. Change the settings on each tab.
6. Click OK.
1. Open the document you want to print.
2. Open the File menu and click Page Setup (Document Setup in some
If you want to change the settings for each print job, change it in
Printing Preferences.
applications).
3. Choose your paper size, orientation, scaling, other options, and make
sure that your machine is selected. Click OK.
SETTING YOUR MACHINE AS A DEFAULT
MACHINE
1. Click the Windows Start menu.
2. For Windows 2000, select Settings > Printers.
•
•
For Windows XP/2003, select Printers and Faxes.
For Windows 2008/Vista, select Control Panel > Hardware and
Sound > Printers.
•
•
For Windows 7, select Control Panel > Hardware and Sound >
Devices and Printers.
For Windows Server 2008 R2, select Control Panel > Hardware >
Devices and Printers.
3. Select your machine.
4. Right-click your machine and select Set as Default Printer.
4. Open the File menu and click Print.
For Windows 7 and Windows Server 2008 R2
5. Choose the number of copies you want and indicate which pages you
want to print.
If Set as default printer item has ► mark, you can select other
printer drivers connected with selected printer.
6. Click Print.
Changing printer settings
You can use advanced printing features provided by your machine.
PRINTING TO A FILE (PRN)
You will sometimes need to save the print data as a file.
To create a file:
Open an application and select Print from the File menu. The machine
name, which appears in the printer properties window may differ depending
on the machine in use. Except for the name, the composition of the printer
properties window is similar to the following.
1. Check the Print to file box at the Print window.
The setting options may differ depending on printers and Macintosh
OS version.
Layout
The Layout tab provides options to adjust how the document appears
on the printed page. You can print multiple pages on one sheet of paper.
Select Layout from the drop-down list to access the following features.
2. Select the folder, assign a name to the file, and then click Print.
MACINTOSH PRINTING
This section explains how to print using Macintosh. You need to set the print
environment before printing.
•
•
Pages per Sheet: This option determines how many pages to be
printed on one page. (See "Printing multiple pages on one sheet of
Layout Direction: This option allows you to select the printing
direction on a page similar to the examples on UI.
•
•
Printing_ 51
Download from Www.Somanuals.com. All Manuals Search And Download.
•
•
•
Border: This option allows you to print a border around each page
on the sheet.
Two-Sided: This option allows you to print on both sides of a
Reverse Page Orientation: This option allows you to rotate paper
180 degrees.
•
Fit to Page: This option allows you to scale your print job to any
selected paper size regardless of the document size. This can be
useful when you want to check fine details on a small document.
Printing multiple pages on one sheet of paper
You can print more than one page on a single sheet of paper. This feature
provides a cost-effective way to print draft pages.
Graphics
1. Open an application, and select Print from the File menu.
The Graphics tab provides options for selecting Resolution. Select
Graphics from the drop-down list to access the graphic features.
2. Select Layout from the drop-down list. In the Pages per Sheet
drop-down list, select the number of pages you want to print on one
sheet of paper.
•
Resolution: This option allows you to select the printing resolution.
The higher the setting, the sharper the clarity of printed characters
and graphics. The higher setting also may increase the time it takes
to print a document.
3. Select the other options you want to use.
4. Click Print, then machine prints the selected number of pages you want
Paper
to print on one sheet of paper.
Set Paper Type to correspond to the paper loaded in the tray from
which you want to print. This will let you get the best quality printout. If
you load a different type of print material, select the corresponding paper
type.
Printing on both sides of paper
You can print on both sides of the paper. Before printing in the duplex mode,
decide on which edge you will be binding your finished document. The
binding options are, as follows:
•
Long-Edge Binding: This option is the conventional layout used in
book binding.
•
Short-Edge Binding: This option is the type often used with calendars.
1. From your Macintosh application, select Print from the File menu.
2. Select Layout from the drop-down list.
3. Select a binding orientation from Two Sided Printing option.
4. Select the other options you want to use.
5. Click Print and; the machine prints on both sides of the paper.
Printer Features
Printer Features tab provides Reverse Duplex Printing and Fit to
Page options. Select Printer Features from the drop-down list to access
the following features.
If you print more than 2 copies, the first copy and the second copy
might print on same sheet of paper. Avoid printing on both sides of
paper when you are printing more than 1 copy.
•
Reverse Duplex Printing: This option allows you to select general
print order compared to duplex print order. If this option does not
appear, your machine does not have this feature.
Printing_ 52
Download from Www.Somanuals.com. All Manuals Search And Download.
5. Click Apply to apply the changes and close the Properties window.
6. Click OK in the LPR GUI window to start printing.
LINUX PRINTING
7. The Printing window appears, allowing you to monitor the status of your
Printing from applications
There are a lot of Linux applications that allow you to print using Common
UNIX Printing System (CUPS). You can print on your machine from any
such application.
print job.
To abort the current job, click Cancel.
Printing files
1. Open an application, and select Print from the File menu
You can print many different types of files on your machine using the
standard CUPS way, directly from the command line interface. The CUPS
lpr utility allows you to do that. But the drivers package replaces the
standard lpr tool by a much more user-friendly LPR GUI program.
2. Select Print directly using lpr.
3. In the LPR GUI window, select the model name of your machine from
the printer list and click Properties.
To print any document file:
1. Type lpr <file_name> from the Linux shell command line and press
Enter. The LPR GUI window appears.
When you type only lpr and press Enter, the Select file(s) to print
window appears first. Just select any files you want to print and click
Open.
2. In the LPR GUI window, select your machine from the list, and change
the print job properties.
3. Click OK to start printing.
Configuring Printer Properties
Using the Printer Properties window provided by the Printers
configuration, you can change the various properties for your machine as
a printer.
1. Open the Unified Driver Configurator.
If necessary, switch to Printers configuration.
2. Select your machine on the available printers list and click Properties.
3. The Printer Properties window opens.
4. Change the print job properties using the following four tabs displayed at
the top of the window.
The following five tabs display at the top of the window:
•
General: This option allows you to change the printer location and
name. The name entered in this tab displays on the printer list in
Printers configuration.
•
Connection: This option allows you to view or select another port. If
you change the machine port from USB to parallel or vice versa
while in use, you must re-configure the machine port in this tab.
•
General: This option allows you to change the paper size, the paper
type, and the orientation of the documents. It enables the duplex
feature, adds start and end banners, and changes the number of
pages per sheet.
•
•
Driver: This option allows you to view or select another machine
driver. By clicking Options, you can set the default device options.
Jobs: This option shows the list of print jobs. Click Cancel job to
cancel the selected job and select the Show completed jobs check
box to see previous jobs on the job list.
Classes: This option shows the class that your machine is in. Click
Add to Class to add your machine to a specific class or click
Remove from Class to remove the machine from the selected
class.
•
•
Text: This option allows you to specify the page margins and set the
text options, such as spacing or columns.
Graphics: This option allows you to set image options that are used
when printing image files, such as color options, image size, or
image position.
•
•
Advanced: This option allows you to set the print resolution, paper
source, and destination.
Printing_ 53
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Click OK to apply the changes and close the Printer Properties
Layout tab
window.
The Layout tab provides options to adjust how the document appears
on the printed page.
PRINTING WITH PS DRIVER
PS printer driver is provided on the supplied software CD.
If you select Typical installation for a local printer or Typical installation
for a network printer when installing machine’s driver, PS driver will
automatically be installed. (See "Installing USB connected machine’s driver"
After installing the memory module, you need to select it in the printer
properties of the PostScript printer driver in order to use it. (See
page 120.)
1. Open the document you want to print.
2. Select Print from the File menu. The Print window appears. It may look
slightly different depending on your application.
The basic print settings are selected within the Print window. These
settings include the number of copies and print range.
Orientation
This option allows you to select the direction in which the information is
printed on a page.
•
•
Portrait: This option prints across the width of the page, letter style.
Landscape: This option prints across the length of the page,
spreadsheet style.
•
Rotate Landscape: This option allows you to rotate the page, 180
degrees.
Print on Both Sides
You can print on both sides of a sheet of paper. Before printing, decide
how you want your document oriented.
•
•
None
Flip on Long Edge: This option is the conventional layout used in
bookbinding.
3. Select your machine’s PS driver from the Select Printer list.
To take advantage of the printer features provided by your printer
driver, click Properties or Preferences in the application’s Print
window to change the print setting. (See "Understanding PS
4. To start the print job, click OK or Print in the Print window.
•
Flip on Short Edge: This option is the type often used with
calendars.
Understanding PS driver’s Printing Preferences
Opening Printing Preferences
1. Open the document you want to print.
2. Select Print from the File menu. The Print window appears.
3. Select your machine’s PS driver from the Select Printer.
4. Click Properties or Preferences.
Do not print on both sides of labels, transparencies, envelopes, or
thick papers. It may result in paper jam and damage to the
machine.
Pages Per Sheet
You can select the number of pages to print on a single sheet of paper.
To print more than one page per sheet, the pages will be reduced in size
and arranged in the order you specify. You can print up to 16 pages on
one sheet.
Printing_ 54
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced
You can select Paper Size, Graphic, and Document Options.
•
Paper/Output: This option allows you to choose paper size you
want to use.
•
•
Graphic: This option allows you to select printing quality options.
Document Options: This option allows you to select options such
as PostScript Options and, Printer Features.
Paper/Quality tab
You can select paper tray and media type.
•
•
Paper Source: This option allows you to choose which tray to use.
Media: This option allows you to choose which media to use.
Printing_ 55
Download from Www.Somanuals.com. All Manuals Search And Download.
13.
copying
This chapter gives you step-by-step instructions for copying documents.
This chapter includes:
•
•
•
•
•
Advanced tab
UNDERSTANDING THE COPY SCREEN
When you press Copy on the main screen, the Copy screen appears which
has several tabs and lots of copying options. All the options are grouped by
features so that you can configure your selections easily.
If the screen displays an other menu, press (
) to go to the main screen.
Basic tab
•
ID Copy: Prints 2-sided originals on one sheet of paper. This feature is
helpful for copying a small-sized item, such as a business card. (See "ID
•
•
•
•
•
•
•
N-Up: Prints 2 or 4 original images, reduced to fit onto one sheet of
Clone Copy: Prints multiple image copies from the original document
page 60.)
Booklet: Creates booklets from a sequential set of either 1-sided or
Covers: Automatically adds covers to your copied set using stock taken
Transparencies: Adds a blank or printed divider between
•
•
•
Reduce/Enlarge: Reduces or enlarges the size of a copied image.
Duplex: Sets the machine to print copies on both sides of the paper.
Output: Selects Collated or Uncollated copy options.
•
•
Original Type: Improves the copy quality by selecting the document
type for the current copy job. (See "Selecting the type of originals" on
page 58.)
•
•
Light, Dark: Adjusts the brightness level to make a copy that is easier
to read, when the original contains faint markings and dark images. (See
Paper Supply: Selects the paper supply tray.
Copying_ 56
Download from Www.Somanuals.com. All Manuals Search And Download.
6. Press Start on the control panel to begin copying.
Image tab
To cancel the current copy job, press Stop on the control panel. Or
you can delete the current and pending job using Job Status on the
control panel. Select the job you want to cancel and press Delete.
CHANGING THE SETTINGS FOR EACH COPY
On the Basic tab of the Copy screen, you can select copy features before
starting to copy.
The Basic tab setting is only for each copy. That means that the
setting does not apply to the next copy job. After finishing the current
copy job, the machine automatically restores the default settings after
certain time. Or the machine resume to default setting when you press
the Clear All button on the control panel.
The default copy setting can be changed in Admin Setting. (See
•
Erase Edge: Allows you to erase punch holes, staple marks, and fold
creases along any of the four documents edges. (See "Erasing edges"
Selecting the size of originals
Press the Basic tab > Original Size, then use left/right arrows to set the
•
•
Erase Background: Prints an image with no background. (See
original size.
Press more to see the detail values.
•
Custom: Selects the scanning area of the original. Press the cardinal
point arrows to set the size.
•
Auto: Automatically detects the size of originals, but this option
supports only when originals are Legal, Letter, A4, or A5 sized. If the
originals is mixed-sized, then the machine detects the largest original
size and select the largest-sized paper in the tray.
BASIC COPY
This is the normal and usual procedure for copying your originals.
•
•
Mixed Size (Letter & Legal): Allows for the use of both of Letter and
Legal sized papers together, and the machine uses the proper-sized
paper from several trays. For example, if the originals are total 3 pages,
1st page is the letter-sized paper, 2nd page is the legal-sized paper, and
3rd page is the letter-sized paper, then the machine prints the output first
letter, legal, and letter in order from several trays.
1. Press Copy from the main screen.
2. Place originals, face up, in the document feeder. Or you can use the
scanner glass with a single original document face down and closed the
scanner lid.
Other preset values: Allows user to easily select commonly used
values.
Reducing or enlarging copies
Press the Basic tab > Reduce/Enlarge, then use left/right arrows to reduce
or enlarge an image on the paper.
Press more to see the detail values.
•
•
Original (100%): Prints texts or images the same size as originals.
Auto Fit: Reduces or enlarges the original based on the size of the
output paper.
•
Other preset values: Allows you to easily select commonly used
values.
The Custom option is different depending on where the originals is
placed. In the document feeder, 25~200% adjustment is possible. And
in the scanner glass, 25~400% adjustment is possible.
3. If necessary, adjust the settings for each copy such as Original Size,
Copying on both sides of originals
Press the Basic tab > Duplex, then use left/right arrows to select Duplex
value.
4. Select the tray by pressing the appropriate tray on screen.
5. Enter the number of copies using the number keypad, if necessary.
If you want to copy originals on the scanner glass and copy both sides
of original, the message Another Page? appears after the first page
copied. At this time, load the original’s the other side facing down and
press Yes, then the machine starts scanning the second page of your
original.
If you want to copy originals on the scanner glass and copy more
than two copies, the message Another Page? appears after the
first page copied. At this time, if you select No, the machine starts
copying the rest of your originals and sorts the copied papers in
order. Because the default value of the Output option is Collated.
Press more to see the detail values.
Copying_ 57
Download from Www.Somanuals.com. All Manuals Search And Download.
•
•
1 -> 1 Sided: Scans one side of an original and prints on one side of the
paper. This function produces exactly the same print out from originals.
degree.
•
Reverse 2 -> 2 Sided: Scans the both sides of originals and prints
them on both sides of a paper. But the machine reverses the print out
order of the originals. The machine prints the back sides of originals first,
which means the front sides of originals is printed on the back side of a
paper.
1 -> 2 Sided: Scans one side of originals and prints them on both sides
of the paper.
•
1 -> 2 Sided, Rotate Side 2: Scans one side of the originals and prints
on both sides of the paper. But, the information on the back side of the
print out is rotated 180°.
Deciding the form of copy output
Press the Basic tab > Output, then use left/right arrows to select Collated
or Uncollated.
If you want to copy originals on the scanner glass and copy both sides
of original, the message Another Page? appears after the first page
copied. At this time, load the original’s the other side facing down and
press Yes, then the machine starts scanning the second page of your
original.
•
•
2 -> 1 Sided: Scans both sides of the originals and prints each of one
on a separate sheet.
Press more to see the values.
•
Collated: Prints output in sets to match the sequence of originals.
2 -> 2 Sided: Scans both sides of the original and prints on both sides
of the paper. This function produces exactly the same print out from the
originals.
•
Uncollated: Prints output sorted into stacks of individual pages.
•
•
2 -> 1 Sided, Rotate Side 2: Scans both sides of the original and prints
each one on a separate sheet. But, the information on the back side of
the printout is rotated 180°.
Selecting the type of originals
Press the Basic tab and select an appropriate original type.
•
•
•
Text: Use for originals containing mostly text.
Text/Photo: Use for originals with mixed text and photographs.
Photo: Use when originals are photographs.
Reverse 1 -> 2 Sided: Scans originals and prints them on both sides of
a paper. But the machine reverses the print out order of the originals.
The machine prints the second original first, which means the firstly
input original is printed on the back side of a paper. For instance, if you
print 6 sheet of original papers, every even numbered pages of originals
will be printed on the front side of a paper, and every odd numbered
pages of originals will be printed on the back side of a paper.
Changing the darkness
Press the Basic tab and this defines the degree of darkness. Use left/right
arrows to change the level of light and dark in the printouts.
USING SPECIAL COPY FEATURES
On the Advanced tab or the Image tab of the Copy screen, you can select
specific copy features.
•
Reverse 1 -> 2 Sided, Rotate Sided 2: Scans originals and prints
them on both sides of a paper. But the machine reverses the print out
order of the originals. The machine prints the second original first, which
means the firstly input original is printed on the back side of a paper. For
instance, if you print 6 sheet of original papers, every even numbered
pages of originals will be printed on the front side of a paper, and every
odd numbered pages of originals will be printed on the back side of a
paper. The information on the back side of the print out is rotated 180
Copying_ 58
Download from Www.Somanuals.com. All Manuals Search And Download.
5. Select Off, 2Up, or 4Up.
ID card copying
•
•
•
Off: Copies an original onto one sheet of paper.
2Up: Copies two separate originals onto one page.
4Up: Copies four separate originals onto one page.
The machine prints one side of the original on the upper half of the paper
and the other side on the lower half without reducing the size of the original.
This feature is helpful for copying a small-sized item, such as a business
card.
6. Press Start on the control panel.
You cannot adjust the copy size using the Reduce/Enlarge for the
N-Up feature.
Poster copying
Your original will be divided into 9 portions. You can paste the printed pages
together to make one poster-sized document.
This copy feature is available only when you place originals on the scanner
glass.
•
•
This copy feature is available only when you place originals on the
scanner glass.
The size of the 2-sided originals should be smaller than A5, if not,
some of it won’t be copied.
1. Place the front side of an original facing down on the scanner glass
where arrows indicate as shown, and close the scanner lid.
1. Place a single original face down on the scanner glass and close the
2. Press Copy from the main screen.
3. Select the tray in Paper Supply.
4. Press the Advanced tab > ID Copy.
5. Press Start on the control panel.
Then the machine starts scanning the front side.
2. Press Copy from the main screen.
3. Select the tray in Paper Supply.
4. Press the Advanced tab > Poster Copy.
This feature is available only when the options in the Basic tab are
selected as below;
6. Turn the original over and place it on the scanner glass, where arrows
•
•
•
Duplex to 1 -> 1 Sided
Reduce/Enlarge to Original (100%)
Paper Supply to Tray
indicate as shown then, close the scanner lid.
5. Press On to activate this feature.
6. Press OK.
7. Press Start on the control panel to begin copying.
Your original is divided into 9 portions. Each portion is scanned
and printed one by one in the following order:
7. Press Start on the control panel to begin copying.
•
If the original is larger than the printable area, some portions may
not be printed.
•
If this option is grayed out, select the Duplex option to 1 -> 1
Sided, the Output option to Collated.
2-up or 4-up copying (N-up)
The machine reduces the size of the original images and prints 2 or 4 pages
onto one sheet of paper.
2 or 4-up copying is available only when you load originals into the
document feeder.
Clone copying
The machine prints multiple original images on a single page. The number
of images is automatically determined by the original image and the paper
size.
1
2
This copy feature is available only when you place originals on the scanner
glass.
3
4
2. Press Copy from the main screen.
3. Select the tray in Paper Supply.
4. Press the Advanced tab > N-Up.
Copying_ 59
Download from Www.Somanuals.com. All Manuals Search And Download.
1. Place a single original face down on the scanner glass and close the
1. Place the originals face up in the document feeder. Or place a single
original face down on the scanner glass and close the scanner lid. (See
2. Press Copy from the main screen.
3. Select the tray in Paper Supply.
4. Press the Advanced tab > Booklet.
2. Press Copy from the main screen.
3. Select the tray in Paper Supply.
4. Press the Advanced tab > Clone Copy.
This feature is available only when the options in the Basic tab are
selected as below;
5. Press On to use this feature, and select detailed settings for each
option.
•
•
•
Duplex to 1 -> 1 Sided
Reduce/Enlarge to Original (100%)
Paper Supply to Tray.
•
•
1 Sided Original: Copies on one side of originals.
2 Sided Original: Copies on both sides of originals.
6. Press OK.
7. Press Start on the control panel to begin copying.
5. Press On to activate this feature.
6. Press OK.
This feature is possible only with A4, Letter, Legal, Folio, Oficio, JIS
B5, ISO B5, Executive, A5 and Statement sized paper.
7. Press Start on the control panel to begin copying.
Book copying
Cover copying
The machine automatically adds covers to your copied set using stock taken
from a different tray. Covers must be the same size and orientation as the
main body of the job.
Use this feature to copy a book. If the book is too thick, lift the scanner lid
until its hinges are engaged by the stopper and then close the scanner lid. If
the book or magazine is thicker than 30 mm (1.18 inches), start copying with
the scanner lid open.
1. Place the originals face up in the document feeder. Or place a single
original face down on the scanner glass and close the scanner lid. (See
This copy feature is available only when you place originals on the scanner
glass.
2. Press Copy from the main screen.
3. Select the tray in Paper Supply.
4. Press the Advanced tab > Covers.
Once you have set the Paper Supply option to Auto, you cannot
use this feature.
1. Place the originals face down on the scanner glass and close the
2. Press Copy from the main screen.
5. Press On to use this feature, and select detailed settings for each
option.
•
•
•
Position: Selects whether the cover will be placed at the front,
back, or both.
Cover Sheet: Selects whether the cover will be 1 sided, 2 sided, or
blank paper.
Paper Source: Select the paper tray, where the cover sheet is
loaded.
To remove shadows of a book edge, press the Image tab > Edge
Erase > Book Center and Edges Erase.
3. Press the Advanced tab > Book Copy.
4. Select the appropriate option.
•
•
•
•
Off: Disables this feature.
6. Press OK.
7. Press Start on the control panel to begin copying.
Left Page: Prints left page of the book.
Right Page: Prints right page of the book.
Both Page: Prints both facing pages of the book.
Transparency copying
When you prepare transparencies for presentations, use this feature to copy
the information.
5. Press OK.
6. Press Start on the control panel to begin copying.
Before you start this special copy job, set the tray's Paper Types and
Booklet copying
The machine automatically prints on one or both sides of the paper, which
are then folded to produce a booklet with all of the pages in the correct
sequence.
The machine will also reduce and correctly adjust the position of each
image to fit on the selected paper.
1. Place the originals face up in the document feeder. Or place a single
original face down on the scanner glass. (See "Loading originals" on
page 36.)
2. Load the right-sized transparencies into the tray you have set.
3. Set the paper type to Transparency.
4. Press Copy from the main screen.
5. Press the Advanced tab > Transparencies.
6. Select Transparencies option.
•
No Separator: Does not place separator sheets between
transparencies.
•
Blank Sheet: Places a blank sheet between transparencies.
Copying_ 60
Download from Www.Somanuals.com. All Manuals Search And Download.
•
Printed Sheet: Places the same image on the divider sheets as
printed on the transparency.
Shifting margins
You can secure a room for binding by shifting the margin of a page.
7. Select media sources, in case you selected either Blank Sheet or
Printed Sheet.
8. Press OK.
9. Press Start on the control panel to begin copying.
Erasing edges
You can copy the original without any edges or margins.
1. Place the originals face up in the document feeder. Or place a single
original face down on the scanner glass and close the scanner lid. (See
2. Press Copy from the main screen.
3. Press the Image tab > Margin Shift.
4. Select Margin Shift option.
•
•
Off: Disables this feature.
Auto Center: Adjusts centers of the paper copy automatically. The
original must be loaded on the scanner glass to use this feature.
Custom Margin: Adjusts the margin of the left and right, top and
bottom as you want using arrows. This option supports both on the
scanner glass or in the document feeder.
1. Place a single original face down on the scanner glass and close the
scanner lid. Or load the originals face up in the document feeder. (See
2. Press Copy from the main screen.
3. Press the Image tab > Edge Erase.
4. Select the appropriate option.
•
5. Press OK.
•
•
•
Off: Disables this feature.
Border Erase: Erases equal amounts on all edges of the copies.
Small Original Erase: Erases 6 mm (0.25 inches) from the edge of
the copies. The original must be placed on the scanner glass to use
this feature.
Hole Punch Erase: Erases hole punch marks from the left edge of
the copies.
Book Center and Edges Erase: Erases shadows of a binding or
book edge from the center and side edges of the copies. This feature
only applies when you do copying a book. (See "Book copying" on
page 60.)
6. Press Start on the control panel to begin copying.
CHANGING THE DEFAULT COPY SETTINGS
If you want to copy always in the same setting, adjust the default copy
•
•
If you have set the Book Copy option to Off, you cannot use Book
Center and Edge Erase.
5. Press OK.
6. Press Start on the control panel to begin copying.
Erasing background images
This feature is helpful when copying originals containing color in the
background, as in newspapers or catalogs.
1. Load the originals, face up, in the document feeder. Or place a single
original face down on the scanner glass and close the scanner lid. (See
2. Press Copy from the main screen.
3. Press the Image tab > Erase Background.
4. Select the appropriate option.
•
•
•
Off: Disables this feature.
Auto: Optimizes the background.
Enhance: The higher the number is, the more vivid the background
is.
•
Erase: The higher the number is, the lighter the background is.
5. Press OK.
6. Press Start on the control panel to begin copying.
Copying_ 61
Download from Www.Somanuals.com. All Manuals Search And Download.
14.
faxing
This chapter gives you information about using your machine as a fax machine.
This chapter includes:
•
•
•
•
•
•
•
•
•
•
•
•
•
We recommend you to use traditional analog phone services
(PSTN: public switched telephone network) when connecting
telephone lines to use Fax. If you use other Internet services (DSL,
ISDN, VolP), you can improve the connection quality by using the
Micro-filter. The Micro-filter eliminates unnecessary noise signals
and improves connection quality or Internet quality. Since the DSL
Micro-filter is not provided with the machine, contact your Internet
Service provider for use on DSL Micro-filter.
UNDERSTANDING THE FAX SCREEN
To use the fax feature, press Fax on the main screen. If the screen displays
an other menu, press
to go to the main screen.
1 Line port
2 Micro filter
3 DSL modem / Telephone line
•
To use advanced features of the fax, press Machine Setup on the
Basic tab
PREPARING TO FAX
Before you send or receive a fax, you need to connect the supplied line cord
to the wall jack. Refer to the Quick Install Guide how to make a connection.
The method of making a telephone connection is varies from one country to
another.
•
Fax number input area: Shows the recipient's fax number using the
number keypad on the control panel. If you configured the phone book,
page 66.)
•
•
Add No: Lets you add more destinations.:
: Deletes the last digit entered.
Faxing_ 62
Download from Www.Somanuals.com. All Manuals Search And Download.
Image tab
•
•
•
•
: Removes all digits of the selected entry.
Remove: Removes the selected fax number entry.
Remove All: Removes all the fax numbers in the input area.
Address: Picks up the frequently used fax numbers directly from your
machine or from SyncThru™ Web Service. (See "Setting up a fax phone
•
•
Duplex: Selects whether the machine send faxes one side of the
original, both sides of the original.
Resolution: Adjusts the resolution options.
Advanced tab
•
•
•
•
•
Original Type: Enhances the fax quality based on the type of the
Darkness: Adjusts the level of lightness or darkness of the fax. (See
Erase Background: Reduces dark backgrounds or paper patterns as
Color Mode: Selects whether the user sends the fax in mono or color.
Back: Returns to the Basic tab.
SENDING A FAX
•
•
•
•
Original Size: Selects the size of the original document. Press OK to
update current setting.
Delay Send: Sets the machine to send a fax at a later time without your
Priority Send: Sends an urgent fax before reserved operations. (See
Polling: Used when the receiver requests the document to be faxed
remotely at sender's absence or vice versa. In order to use the polling
function, the originals must be previously stored in the machine. (See
Mailbox: Used to store a received fax or originals in the machine
memory which are ready to be polled. You can use a mailbox on the
same machine you are using, or the one on a remote machine. Each
mailbox has a corresponding mailbox number, name and password.
This part explains how to send a fax and the special methods of
transmission.
When you place the originals, you can use either the document feeder
originals are placed on both the document feeder and the scanner
glass, the machine will read the originals on the document feeder first,
which has higher priority in scanning.
Setting the fax header
In some countries, you are required by law to indicate your fax number on
any fax you send.
•
•
1. Press Machine Setup on the control panel.
2. Press Admin Setting. When the login message pops up, enter
page 33.)
Back: Returns to the Basic tab.
3. Press the Setup tab > Fax Setup > Machine ID & Fax.
4. Touch the input area to enter the machine name and your fax number.
5. Press OK.
Faxing_ 63
Download from Www.Somanuals.com. All Manuals Search And Download.
5. Press On Hook Dial on the control panel.
6. Enter a fax number using the number keypad on the control panel.
Sending a fax
1. Press Fax from the main screen.
If the number is which you have dialed recently, press the Redial/Pause
button on the control panel to show ten recent fax numbers and select a
fax number.
2. Place the originals face up in the document feeder.
7. Press Start when you hear a high-pitched fax signal from the remote fax
machine.
Color faxes are only supported when faxes are sent manually. (See
Resending Automatically
When the number you have dialed is busy or there is no answer, the
machine automatically redials the number.
To change the time interval between redials and/or the number of redial
attempts, follow the steps below:
1. Press Machine Setup on the control panel.
3. Adjust the document settings in the Image tab.
2. Select Admin Setting. When the login message pops up, then enter
page 33.)
3. Press the Setup tab > Fax Setup.
4. Press Redial.
Select Redaial Term and Redial Times.
5. Press OK.
4. Select Duplex and Resolution options in the Basic tab.
If the originals are printed on both sides of the paper, select 2
Sided with left/right arrows in the Duplex feature.
5. When the cursor is blinking in the input line, enter the fax number using
the number keypad on the control panel. Or use Address on the right
side of the screen, if you have stored frequently used fax numbers.
To add a number, press Add No.
6. Press Start on the control panel. The machine starts to scan and send a
Redialing the last number
1. Press Fax from the main screen.
fax to destinations.
•
If you want to send fax directly from your computer, use SmarThru
When you want to cancel a fax job, press Stop before the machine
start transmission. Or press the Job Status button, and select the
job you want to delete, press Delete.
If you used the scanner glass, the machine shows the message
asking to place another page.
While the machine is sending a fax, you can not send an email at
the same time. (See "Scanning originals and sending through
2. Adjust the document settings in the Image tab.
3. Place the originals face up into the document feeder.
4. Press the Redial/Pause button on the control panel to show ten recent
fax numbers.
5. Select a fax number in the list and press OK.
•
•
•
The machine automatically begins to send.
Delaying a fax transmission
You can set your machine to send a fax at a later time when you will not be
present.
1. Press Fax from the main screen.
Sending a fax manually
2. Place the originals face up in the document feeder.
3. Adjust the document settings in the Image tab and the Basic tab.
4. Press the Advanced tab > Delay Send.
Press On.
This method is sending a fax using On Hook Dial on the control panel.
1. Press Fax from the main screen.
2. Place the originals face up into the document feeder.
5. Enter Job Name using the keyboard on the display, select Start Time
with left/right arrows.
If you do not enter Job Name, the machine assigns the job name as
'Fax Send Job xxx'. 'xxx' number are set in order.
Start Time is the specific time you want the fax to be sent. You
can set Start Time on a 24 hour basis and 15 minutes later than
the current time. For example, if it is 1:00, then you can set the
time starting from 1:15. If the set time is incorrect, the warning
message will appear machine resets it to the current time.
6. Press OK to start storing the scanned original data into memory.
To cancel delaying a fax, press Off before sending is activated.
3. Adjust the document settings in the Image tab.
Adding documents to a reserved delay fax job
4. Select Duplex and Resolution options in the Basic tab.
You can add additional documents to the delayed fax job which is saved
in memory.
If the originals are printed on both sides of the paper, select 2
Sided with left/right arrows in the Duplex feature.
Faxing_ 64
Download from Www.Somanuals.com. All Manuals Search And Download.
1. Press Machine Setup on the control panel.
Receiving manually in Telephone mode
You can receive a fax call by pressing On Hook Dial and then pressing
Start when you hear a fax tone from the remote machine. The machine
begins receiving a fax.
2. Press Admin Setting. When the login message pops up, enter
3. Press the Setup tab > Fax Setup.
4. Press down arrow on the right side to move down.
5. Press Send Batch.
6. Press On.
7. Press OK.
Receiving automatically in Answering Machine/Fax
mode
To use this mode, you must attache an answering machine to the EXT
socket on the back of your machine. (See "Rear view" on page 20.)
If the caller leaves a message, the answering machine stores the message
as it would normally. If your machine detects a fax tone on the line, it
automatically starts to receive the fax.
When you send a fax, if a fax number is same as the number in delay
fax, the machine asks whether you want to add more documents to
reserved delay fax.
•
If you have set your machine to this mode and your answering
machine is switched off, or no answering machine is connected to
EXT socket, your machine automatically goes into Fax mode after
a predefined number of rings.
If your answering machine has a user-selectable ring counter, set
the machine to answer incoming calls within 1 ring.
If you are in Telephone mode when the answering machine is
connected to your machine, you must switch off the answering
machine. otherwise, the outgoing message from the answering
machine will interrupt your phone conversation.
Sending a priority fax
This function is used when a high priority fax need to be sent ahead of
reserved operations. The original is scanned into memory and immediately
transmitted when the current operation is finished. In addition, priority
transmission will interrupt a sending to multiple destinations between
stations (example, when the transmission to station A ends, before
transmission to station B begins) or between redial attempts.
•
•
1. Press Fax from the main screen.
2. Place the originals face up in the document feeder.
3. Adjust the document settings in the Image tab and the Basic tab.
4. Press the Advanced tab > Priority Send.
5. Press On.
Receiving faxes manually using an extension
telephone
This feature works best when you are using an extension telephone
connected to the EXT socket on the back of your machine. You can receive
a fax from someone you are talking to on the extension telephone, without
going to the fax machine.
6. Press OK.
7. Press Start to start the urgent fax job.
When you receive a call on the extension phone and hear fax tones, press
the keys *9* on the extension phone. The machine receives the fax.
RECEIVING A FAX
Press the buttons slowly in sequence. If you still hear the fax tone from the
remote machine, try pressing *9* once again.
This part explains how to receive a fax, and the special receiving methods
available.
To change the *9* to, for example, *3*, follow the steps below:
Changing the receive modes
1. Press Machine Setup on the control panel.
Your machine is preset to Fax mode at the factory. When you receive a fax,
the machine answers the call on a specified number of rings and
automatically receives the fax. But if you want to change the Fax mode to
another mode, follow the steps below:
2. Select Admin Setting. When the login message pops up, then enter
page 33.)
3. Press the Setup tab > Fax Setup > Receive Start Code.
4. Select On.
5. Press left/right arrows to display number 3.
6. Press OK.
1. Press Machine Setup on the control panel.
2. Select Admin Setting. When the login message pops up, then enter
page 33.)
3. Press the Setup tab > Fax Setup > Fax Initial Setup > Receive Mode.
4. Select the option.
Receiving in secure receiving mode
You may need to prevent your received faxes from being accessed by
unauthorized people. You can turn on secure receiving mode to restrict
printing of received faxes when the machine is unattended. In secure
receiving mode, all incoming faxes go into memory. To print the received fax
data, enter passcode you have set for this feature.
•
•
•
Telephone: Receives a fax by pressing On Hook Dial and then
Start.
Fax: Answers an incoming fax call and immediately goes into the
fax reception mode.
Answering Machine/Fax: Is for when an answering machine
attached to your machine. Your machine answers an incoming call,
and the caller can leave a message on the answering machine. If the
fax machine senses a fax tone on the line, the machine automatically
switches to Fax mode to receive the fax.
1. Press Machine Setup on the control panel.
2. Select Admin Setting. When the login message pops up, then enter
page 33.)
3. Press the Setup tab > Fax Setup > Secure Receive.
4. Select On.
5. Press OK.
When the memory is full, the machine can no longer receive any
incoming fax. Secure free memory to resume by removing data
stored in the memory.
5. Enter passcode with 4 digit number using the number keypad on the
control panel.
Faxing_ 65
Download from Www.Somanuals.com. All Manuals Search And Download.
resolution setting is automatically changed to Fine.
To deactivate the Secure Receive feature, press Off. In this case, the
received fax will be printed out.
Original Type
Printing received faxes on both sides of the paper
Set this duplex feature to save paper. When the machine prints the received
fax data, it prints them on both sides of the paper.
You can set the original document type to enhance the quality of a
document being scanned.
Press Fax > the Image tab > Original Type. Select the appropriate option
on the screen and press OK.
1. Press Machine Setup on the control panel.
•
•
•
Text: For originals with text or line art.
Text/Photo: For originals with both text and photographs together.
Photo: For originals that are continuous tone photographs.
2. Select Admin Setting. When the login message pops up, then enter
page 33.)
3. Press the Setup tab > Fax Setup > Received Fax Printing > Duplex.
Darkness
Select appropriate option.
You can select the degree of darkness of the original document.
•
•
Off: Prints only one side of the paper.
Long Edge: Prints both sides of the paper, however the binding will
Press Fax > the Image tab > Darkness. Press the right arrow to enhance
the darkness degree and press OK.
be the long edge.
•
Short Edge: Prints both sides of the paper, however the binding will
be the short edge.
Erase Background
You can lighten, reduce or delete the dark backgrounds from scanned
colored paper or newspaper originals.
4. Press OK.
Press Fax > the Image tab > Erase Background. Press Erase to activate
this function. Select Level and press OK.
Receiving faxes in memory
Since your machine is a multi-tasking device, it can receive faxes while you
are making copies or printing. If you receive a fax while you are copying or
printing, your machine stores incoming faxes in its memory. Then, as soon
as you finish copying or printing, the machine automatically prints the fax.
Erase Background is disabled if the Original Type is set to Photo.
Color Mode
You can transmit a fax in color using this feature. But this feature only
applies when you send a fax using On Hook Dial on the control panel.
Press Fax > the Image tab > Color Mode. Select option and OK.
ADJUSTING THE DOCUMENT SETTINGS
Before sending a fax, you can adjust the document settings, such as
resolution, darkness, color, duplex and so forth. Refer to explanation of this
section.
•
•
Mono: Transmits a fax in black and white.
Color: Transmits a fax in color.
Color Mode faxes are only supported when faxes are sent manually.
The document setting herein is for only current job. If you want to
change the default setting on document settings, refer to Admin
SETTING UP A FAX PHONE BOOK
Duplex
Use this feature to store destination names, fax numbers and transmission
settings in your machine. There are two options, Individual and Group.
This function is especially intended for two-sided originals. You can select
whether the machine sends the fax on one side or both sides of the paper.
•
•
Individual: Stores up to 200 fax numbers. And the fax numbers which
are stored in Individual work as Speed Dial No..
Group: Makes groups when you frequently send the same document to
several destinations. You can store up to 100 group dial numbers.
Entries stored here will be available for selection within the sending list
on the Basic tab of Fax. Dialing Group can be also setup comprising of
many Individual entries.
Load the originals onto the document feeder to use this function.
Press Fax > the Basic tab > Duplex. Use left/right arrows to toggle the
value.
•
•
1 Sided: Is for the originals that are printed on one side only.
2 Sided: Is for the originals that are printed on both sides.
Resolution
Storing individual fax numbers (Speed Dial No.)
1. Press Fax > the Basic tab > Individual.
Changing the resolution setting affects the appearance of the received
document.
•
•
•
•
Edit: Changes the ID, Speed Dial No., and Fax No..
New: Creates the new Speed Dial No..
Delete: Deletes the selected Speed Dial No..
Search: Searches the fax number which currently stored in
Individual phone book. When the keyboard pops up, enter ID.
Press Fax > the Basic tab > Resolution. Use left/right arrows to toggle the
value.
•
•
•
Standard: Usually recommended for originals with text. This option will
reduce the transmission time.
Fine: Recommended for the originals containing with small characters,
thin lines, or text that was printed using a dot-matrix machine.
Super Fine: Recommended for originals containing with extremely fine
detail, this option is enabled only if the receiving machine also supports
a Super Fine resolution.
•
Detail: Shows ID, Fax No. and Included group information if it is
grouped. (See "Storing individual fax numbers (Speed Dial No.)" on
page 66.)
•
•
Apply: Inputs the selected fax number to the sending fax number
list in the Basic tab.
Cancel: Cancels the current job and goes to the previous screen.
For memory transmission, Super Fine mode is not available. The
Faxing_ 66
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Press New.
2. Sender gives the Passcode to the receiver.
3. Enter the name of the fax number in the ID field with the pop up
keyboard, and the fax number in the Fax No. area using the number
keypad on the control panel.
3. Receiver dials the fax number and enters the Passcode when
•
•
ID: Enters the name.
Speed Dial No.: Is automatically filled with the first free number. If
you want to assign to a different number, use left/right arrows.
Receiver presses Start to receive the stored fax.
•
Fax No.: Enters a fax numbers, only the numbers, with the area
code if necessary.
Storing the originals for polling
1. Press Fax from the main screen.
2. Place the originals face up in the document feeder. Or you can use the
4. Press OK.
scanner glass with a single original document, face down.
3. Adjust the document settings in the Image tab and the Basic tab.
4. Press the Advanced tab > Polling > Store.
5. Press the input area then the pop up keyboard, enter Passcode (The
four-digit number which you have to inform the receiver). If you do not
want to set Passcode, enter number 0000 here. Then you can store,
delete, print and receive a fax for polling without any passcode.
Storing Group fax numbers (Group No.)
1. Press Fax > the Basic tab > Group.
2. Press New.
3. Press the input area in Group Dial ID, then the keyboard pops up, enter
the name.
Select Group Dial No. with left/right arrows.
•
•
Group Dial ID: Enters the group name.
Group Dial No.: Is automatically filled with the first free number. If
you want to assign to a different number, use left/right arrows.
If you want to use the Mailbox, Store the originals in the Mailbox.
6. Select the Delete On Poll option. If you select Off, the sent fax data will
be remained in the machine’s memory even after the fax transmition. If
you select On, the fax data will be deleted after completes.
7. Press OK to start to store the originals into memory for polling.
8. Give the Passcode to the receiver.
4. Press OK.
5. Select an entry from Speed Dial List, and press Add. Repeat this step
until you added entries you need.
Make sure the selected Speed Dial List is copied to the left pane, group
list.
6. Press OK to save the numbers.
Printing (Deleting) the polling document
1. Press Fax from the main screen.
2. Press the Advanced tab > Polling > Print (or Delete).
3. Enter Passcode.
Setting up a fax phone book using SyncThru™ Web
Service
You can store fax numbers conveniently from the networked computer
using SyncThru™ Web Service.
4. Press OK.
1. Open the web browser in your computer.
2. Enter IP address of your machine, then SyncThru™ Web Service
shows. (Example. http://123.123.123.123)
3. Press Machine Settings > Fax Setup > Fax Phone Book.
Polling a remote fax
This option allows you to retrieve (poll) a fax which is stored in the remote
machine.
1. Press Fax from the main screen.
2. Press the Advanced tab > Polling > Poll from Remote.
4. Select Speed Dial (Individual).
Fax numbers are already stored in Speed Dial (Individual) can be
used when selecting.
Your can use Delay Poll From Remote to poll the fax at a specific
time within 24 hours.
5. Press Add.
3. Enter Passcode and Destination Fax No using the number keypad on
the control panel. You have to be informed Passcode from sender with
the remote fax machine.
6. Enter Index, Name and Phone Number. Index you enter here will be
the Speed Dial No. in the display screen of your machine.
7. Press Apply.
4. Press OK.
Speed Dial numbers can be imported from an *.csv file.
Polling from a remote Mailbox
This option allows you to retrieve (poll) a fax which is stored in the Mailbox
of on the remote machine. Before you start polling, you must be informed of
page 68.)
USING THE POLLING OPTION
Polling is used when one fax machine requests another to send a
document. This is useful when the person with the original document is not
in the office. The person who wants to receive the document, calls the
machine holding where the original is stored and requests that the
document be sent. In other words, it "polls" the machine holding that has the
original.
1. Press Fax from the main screen.
2. Press the Advanced tab > Mailbox > Poll from Remote.
3. Enter Remote Fax No, Mailbox No., and Passcode. All these field are
filled with information from the sender.
To use this feature, both the sender and receiver must have the
polling feature.
You can use Delay Poll From Remote to poll a fax from the
remote machine's Mailbox at certain time within 24 hours.
The polling process is as follows:
4. Press OK
Faxing_ 67
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Press the Advanced tab > Mailbox > Send to Remote.
5. Enter Remote Fax No, Mailbox No., and Passcode. All these field are
USING MAILBOX
filled with information from the receiver.
6. Press OK.
You can store the original data in Mailbox, since you are absent and the
receiver need to be retrieve a fax from you. This feature allows you to
program up to 15 individual Mailbox. Before you store the originals, the
Mailbox must be created.
PRINTING A REPORT AFTER SENDING A FAX
Creating Mailbox
1. Press Machine Setup on the control panel.
2. Select Admin Setting. When the login message pops up, then enter the
page 33.)
You can set the machine to print a report whether a fax transmission is
successfully completed or not.
The detailed information is available in advanced setup part. (See
3. Press the Setup tab > Fax Setup.
1. Press Machine Setup on the control panel.
4. Press the down arrow to scroll down, if necessary.
5. Press Mailbox Setup.
6. Press Mailbox Configuration. Then the screen displays Mailbox List.
7. Select a Mailbox on the Mailbox List.
8. Press Edit Mailbox.
2. Press Admin Setting. When the login message pops up, enter
page 33.)
3. Press the Print/Report tab > Report > Fax Report > Fax Send Report.
4. Press On.
5. Press OK.
9. Press Mailbox ID and enter ID with number keypad on the control panel.
Up to 20 numbers you can enter.
10. Enter Mailbox Name with the pop up keyboard. It can be either alphabet
SENDING A FAX IN TOLL SAVE TIME
or number up to 20 digits.
11. Enter Mailbox Passcode with the numeric keypad on the control panel.
You can set the machine to send a fax in toll save time to save a telephone
fee. If you send a fax after setting this feature, fax data will be stored in
machine's memory and the machine will start to send fax in toll save time.
If you set Mailbox Passcode to number 0000, then the machine
does not ask passcode for using Mailbox, such as storing,
deleting, printing, receiving.
1. Press Machine Setup on the control panel.
2. Press Admin Setting. When the login message pops up, enter
page 33.)
12. Set Notification option to On, if you want to be notified when a fax is
received into Mailbox.
13. Press OK.
3. Press the Setup tab > Fax Setup.
4. Press down arrow on the right side.
5. Press Toll Save.
6. Press On.
7. Press Start Time and set the start date and time with left/right arrows.
8. Press OK.
9. Press End Time and set the end date and time with left/right arrows.
10. Press OK.
Storing originals in Mailbox
Since you created the mailbox, you can store originals in it.
1. Press Fax from the main screen.
2. Place the originals face up in the document feeder. Or you can use the
scanner glass with a single original document faced down.
3. Adjust the document settings in the Image tab and the Basic tab.
4. Press the Advanced tab > Mailbox > Store.
11. Press OK.
page 68.)
6. Press OK.
FORWARDING A FAX TO OTHER DESTINATION
Deleting the data in a specific Mailbox
a) Press Fax > the Advanced tab > Mailbox > Delete.
b) Enter Mailbox No. and Passcode, and then press OK. When the
confirmation window appears, press Yes to complete the job.
Printing a Mailbox
You can set the machine to forward the received or sent fax to other
destination by a fax or an email. If you are out of office but have to receive
the fax, this feature may be useful.
•
When you forward a fax by an email, you firstly set the mail server
and IP address in SyncThru™ Web Service. (See "Using
a) Press Fax > the Advanced tab > Mailbox > Print.
b) Enter Mailbox No. and Passcode, and press OK.
•
If this Fax Forward Settings feature to On, you cannot use a fax
with the On Hook Dial on the control panel.
Faxing to a remote Mailbox
Forwarding a sent fax to other destination by a fax
You can set the machine to forward every fax you sent to other destination
by faxing.
To fax and store the originals in a recipient's Mailbox in this machine, you
can use the Send to Remote feature.
1. Press Fax from the main screen.
1. Press Machine Setup on the control panel.
2. Place the originals face up in the document feeder. Or you can use the
scanner glass with a single original document face down.
3. Adjust the document settings in the Image tab and the Basic tab.
2. Press Admin Setting. When the login message pops up, enter
page 33.)
Faxing_ 68
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Press the Setup tab > Fax Setup.
7. Press OK.
4. Press down arrow on the right side.
5. Press Fax Forward Settings > Forward to Fax Setting > Send
SETTING UP THE FAX ENDING TONE
Forward.
6. Press On and enter a fax number using the keypad on the control panel.
7. Press OK.
The end fax tone that sounds to indicate that the fax has been received can
be turned on or off.
1. Press Machine Setup on the control panel.
Forwarding a received fax to other destination by a
fax
With this feature, you can forward every fax you received to other
destination by faxing. When the machine receives a fax, a fax is stored in
the memory then, the machine sends it to the destination you have set.
2. Press Admin Setting. When the login message pops up, enter
page 33.)
3. Press the Setup tab > Fax Setup.
4. Press down arrow on the right side.
5. Press Fax Ending Sound.
6. Press On.
1. Press Machine Setup on the control panel.
2. Press Admin Setting. When the login message pops up, enter
page 33.)
7. Press OK.
3. Press the Setup tab > Fax Setup.
4. Press down arrow on the right side.
5. Press Fax Forward Settings > Forward to Fax Setting > Receive
Forward.
6. Press Forward and enter a fax number using the keypad on the control
panel.
•
If you want to set the start time and end time, select Start Time and
End Time.
•
If you want the machine to print the report after forwarding a fax, set
the Forward & Print.
7. Press OK.
Forwarding a sent fax to other destination by an
email
1. Press Machine Setup on the control panel.
2. Press Admin Setting. When the login message pops up, enter
page 33.)
3. Press the Setup tab > Fax Setup.
4. Press down arrow on the right side.
5. Press Fax Forward Settings > Forward to Email Setting > Send
Forward.
6. Press On.
7. Enter the From and Destination Email option using the keyboard on
the display.
8. Press OK.
Forwarding a received fax to other destination by an
email
1. Press Machine Setup on the control panel.
2. Press Admin Setting. When the login message pops up, enter
page 33.)
3. Press the Setup tab > Fax Setup.
4. Press down arrow on the right side.
5. Press Fax Forward Settings > Forward to Email Setting > Receive
Forward.
6. Press Forward and enter the From and Destination Email option using
the keyboard on the display.
If you want the machine to print the report after forwarding a fax, set the
Forward & Print.
Faxing_ 69
Download from Www.Somanuals.com. All Manuals Search And Download.
15.
scanning
Scanning with your machine lets you turn pictures and text into digital files that can be stored on your computer.
This chapter includes:
•
•
•
•
•
•
•
•
•
•
•
•
The maximum resolution that can be achieved depends upon various
factors, including computer speed, available disk space, memory, the
size of the image being scanned, and bit depth settings. Thus,
depending on your system and what you are scanning, you may not
be able to scan at certain resolutions, especially using enhanced
resolution.
UNDERSTANDING THE SCAN SCREEN
To use the scanning feature, press Scan on the main screen. If the screen
displays another menu, press (
) to go to the main screen.
BASIC SCANNING METHOD
You can scan the originals with your machine via an USB cable or the
network.
•
Scan and Fax Manager 2: You just walk to the machine with the
originals and scan them from the control panel. Then, the scanned data
will be stored in the connected computers My Documents folder. When
you install all the softwares in the supplied CD, the Scan and Fax
Manager 2 is also automatically installed on your computer. This feature
can be used via the local connection or the network connection. (See
If the message asking Auth.ID, Password, and Realm Name, it
means the network administrator has set the authentication in
SyncThru™ Web Service. (See "Using SyncThru™ Web Service" on
page 93.)
•
•
TWAIN: TWAIN is the one of a preset imaging applications. Scanning
an image launches the selected application, enabling you to control the
scanning process. This feature can be used via the local connection or
the network connection. (See "Scanning with TWAIN-enabled software"
SmarThru Office : This program is the accompanying software for your
machine. You can use this program to scan images or documents. This
feature can be used via the local connection or the network connection.
Press Scan to Email, Scan to PC or Scan to Server.
•
•
•
•
WIA: WIA stands for Windows Images Acquisition. To use this feature,
your computer must be connected directly with the machine via an USB
Email: You can send the scanned image as an email attachment. (See
page 72.)
FTP: You can scan an image and upload it to an FTP server. (See
page 74.)
SMB: You can scan an image and send it to a shared folder on an SMB
server. (See "Scanning originals and sending via SMB/FTP (Scan to
•
•
•
Scan to Email: Scans and sends the scanned output to the destination
by email. (See "Scanning originals and sending through email (Scan to
Scan to PC: Scans and sends the scanned output to your PC. (See
page 73.)
Scan to Server: Scans and sends the scanned output to the
destination with SMB and FTP. (See "Scanning originals and sending
Basic tab
This section explains the Basic tab of Scan to Email, Scan to PC and
Scan to Server’s basic screen.
Scanning_ 70
Download from Www.Somanuals.com. All Manuals Search And Download.
Scan to Email
Scan to Server
•
•
•
SMB: Sends the scanned file to SMB.
FTP: Sends the scanned file to FTP.
•
•
From: Sender's email address.
To/Cc/Bcc: Recipients' addresses. Cc (carbon copy) is for copies to
an additional recipient and Bcc (blind carbon copy) is for the same
as Cc but the recipient's name is not displayed.
Subject/Message: Subject and message of the email.
Remove All: Erases everything in the input area.
Address: Inputs the recipient's address just by pressing stored
addresses. You can store frequently used email addresses from your
computer to the machine using the SyncThru™ Web Service. (See
Duplex: Selects whether the machine scans on one side of the
paper (1 Sided), both sides of the paper (2 Sided), or both sides of
paper but back is rotated 180 degrees (2 Sided, Rotate Side 2).
No.: Index number, which you entered in SyncThru™ Web Service.
sending via SMB/FTP (Scan to Server)" on page 74.) SyncThru™
Web Service.
Duplex: Selects whether the machine scans on one side of the
paper (1 Sided), both sides of the paper (2 Sided), or both sides of
paper but back is rotated 180 degrees (2 Sided, Rotate Side 2).
•
•
•
•
•
•
•
•
Resolution: Selects the scanning resolution value.
Back: Returns to the previous screen.
•
•
Resolution: Selects the scanning resolution value.
Advanced tab
Back: Returns to the previous screen. If the network authentication
is enabled, the log off confirmation message pops up and closes
Scan to Email.
Scan to PC
•
•
Original Size: Selects the size of originals.
Back: Returns to the previous screen.
Image tab
If the authentication for network appears, you have to select ID and type
in Password to enter the Scan to PC screen.
•
•
No.: Lists the number in order for application programs.
Application: Shows the available application programs from your
computer.
•
•
Select: Moves to the application program you have selected.
Logout: Logout from the Scan to PC screen.
Scanning_ 71
Download from Www.Somanuals.com. All Manuals Search And Download.
•
•
Original Type: Selects whether the original is text or photo. (See
Color Mode: Adjusts the color options of the scan output. If the original
Darkness: Adjusts the degree of darkness of the scan output. Use
Erase Background: Erases backgrounds like paper patterns. (See
a check mark of SMTP Requires POP3 Before SMTP
Authentication.
a) Enter the IP address in dotted decimal notation or as a host name.
b) Enter the server port number, from 1 to 65535. The default port
number is 25.
•
•
•
•
Sending a scanned image to several destinations as
an email attachment
1. Load originals face up into the document feeder, or place a single
Back: Returns to the previous screen.
original face down on the scanner glass.
Output tab
2. Press Scan from the main screen.
If the authentication message shows, enter Auth. ID, Password
and Realm Name. This message shows only when the network
administrator has set the authentication in SyncThru™ Web
Service. (See "Setting authentication for authorized user" on
page 74.)
•
•
page 77.)
Scan Preset: Automatically changes some scan options, such as file
format, resolution, and more. You can adjust options to fit each specific
3. Press Scan to Email.
4. Set the scan features in the Advanced, Image, or Output tabs. (See
5. Press the Basic tab to enter the email address.
•
•
Back: Returns to the previous screen.
•
From: Touch From. The keyboard pops up on the screen. Use the
pop up keyboard to enter your email addresses. Or you can use
page 73.)
SCANNING ORIGINALS AND SENDING
THROUGH EMAIL (SCAN TO EMAIL)
•
To/Cc/Bcc: Enter recipient's email address manually with the pop
up keyboard, or by pressing Local or Global. Local or Global
addresses are pre-loaded address lists from your computer or the
LDAP server which is configured at Web UI. (See "Global" on
page 73.)
Subject: Title of email.
Message: The contents of the email. The maximum size is 1KB.
You can scan the originals and email the scanned image to several
destinations from the machine by email.
Setting up an email account
To scan and send an image as an email attachment, you need to set up
network parameters using SyncThru™ Web Service.
•
•
1. Turn your networked computer on and open the web browser.
2. Enter your machine's IP address as the URL in a browser.
3. Click Machine Settings and E-mail Setup.
To delete previously entered contents, press Remove All.
6. Set the scan quality by Duplex and Resolution.
•
Duplex: Sets this option for originals that are printed either on one
side only, or on both sides.
Resolution: Sets the scanning resolution by pressing left/right
arrows.
4. Select IP Address or Host Name.
5. Enter the IP address in dotted decimal notation or as a host name.
6. Enter the server port number, from 1 to 65535.
The default port number is 25.
7. Check the box next to SMTP Requires Authentication to require
authentication.
8. Enter the SMTP server login name and password.
•
7. Press the Start button to scan and send the file.
While the machine is sending an email, you cannot use the machine to
copy or to send a fax.
9. Click Apply.
If the authentication method of SMTP server is POP3beforeSMTP, put
Scanning_ 72
Download from Www.Somanuals.com. All Manuals Search And Download.
The method of storing varies depending on the server and the
operating systems.
Storing email addresses
There are two kinds of email addresses - Local on your machine's memory
and Global on the LDAP server - which differ depending on where they are
stored. Local means email addresses are stored in the machine's memory,
and Global means email addresses are stored in a specified (LDAP) server.
Entering email addresses by the address book
Once you have stored the frequently used addresses into the address
book, you can enter email addresses singly, as follows:
Through the SyncThru™ Web Service, you can easily enter and store email
addresses from your computer.
1. Press Local or Global from the Basic tab of Scan to Email.
2. Press the first alphabet of the address you are looking for.
Or press Search to type in the full email address and press OK.
When the search is completed, screen displays the search results.
Storing on your local machine
This method means that you store email addresses on your machine’s
memory. You can add addresses, as well as group them in particular
catagories.
3. Press From and select the email address you want from the email
list and press Apply.
Individual
Do the same to enter To, Cc or Bcc.
1. Turn your networked computer on and open the web browser.
2. Enter your machine's IP address as the URL in a browser.
3. Click Go to access the SyncThru™ Web Service.
4. Click Machine Settings > E-mail Setup > Individual Address
Book. The screen shows Individual Address Book on the right
side of the screen.
4. Press OK.
Entering email addresses by the keyboard
When you press the input field for From, To, Cc, or Message, the
keyboard shows on the display screen.
The following procedure is an example of entering "abcdefg@abc.com".
1. Press From in the Basic tab of the Scan to Email.
2. Press a, b, c, d, e, f, g.
5. Click Add.
6. When the Add E-Mail screen appears, select the Index number,
enter User Name and E-mail Address.
3. Press @.
7. Click Apply.
4. Press a, b, c.
8. To check if the emails are correctly stored and listed on your
5. Press. and press c, o, m.
machine, press Local and select Individual using the left/rigt arrow.
To enter contents in other fields, press left/right arrow on the
upper left of the keyboard.
9. Press the first alphabet of the address you are looking for.
Or press Search to type in the full email address and press OK.
When the search is completed, screen displays the search results.
6. Press OK after entering all the contents.
Group
SCANNING ORIGINALS AND SENDING TO
YOUR COMPUTER (SCAN TO PC)
1. Access to the SyncThru™ Web Service from your computer.
2. Make sure you have configured Individual Address Book.
3. Click Machine Settings > E-mail Setup > Group Address Book.
Then the screen shows Group Address Book on the right side.
4. Click Add.
You can scan an image on the machine via the Scan and Fax Manager 2
program that is installed in your networked computer.
5. Select the Group number and enter Group Name.
6. Select email addresses by clicking the check boxes.
7. Click Apply.
For USB connected machine
This is a basic scanning method for usb connected machine.
1. Make sure that the machine is connected to your computer and powered
8. To check if the emails are correctly stored and listed on your
on.
machine, press Local and select Group using the left/rigt arrow.
2. Load originals face up into the document feeder, or place a single
original face down on the scanner glass.
9. Press the first alphabet of the address you are looking for.
Or press Search to type in the full email address and press OK.
When the search is completed, screen displays the search results.
3. Press Scan from the main screen.
4. Press Scan to PC.
Global
5. Make sure Local PC is shown.
Email addresses stored in Global in your machine are processed by the
LDAP server.
If necessary, press the right arrow to toggle from Network PC to Local
PC.
6. Press Login.
7. Select an application from the application list and press Select.
8. Press the Start button on the control panel to start scanning.
9. The original will be scanned and sent to your computer.
1. Turn your networked computer on and open the web browser.
2. Enter your machine's IP address as the URL in a browser.
3. Click Go to access the SyncThru™ Web Service.
4. Click Machine Settings > LDAP Server Setup. Then the LDAP
Server screen shows on the right side.
5. Select IP Address or Host Name and enter LDAP server and Port.
6. Enter optional information.
7. Click Apply.
For network connected machine
Make sure the printer driver is installed on your computer using the software
CD, since the printer driver includes the scan program. (See "Installing
The LDAP server administrator must store the email address data.
Scanning_ 73
Download from Www.Somanuals.com. All Manuals Search And Download.
1. Make sure that your machine and the computer are connected to a
network and Scan and Fax Manager 2 is installed on the computer.
2. Load originals face up into the document feeder, or place a single
original face down on the scanner glass.
3. Press Scan from the main screen.
Setting up an SMB server
To use an SMB server, you need to set up parameters for access to SMB
servers using SyncThru™ Web Service.
1. Turn your networked computer on and open the web browser.
2. Enter your machine's IP address as the URL in a browser.
3. Click Go to access the SyncThru™ Web Service.
4. Click Machine Settings > SMB Setup > Server List.
5. Click Add.
If the authentication message shows, enter Auth. ID, Password
and Realm Name. This message shows only when the network
administrator has set the authentication in SyncThru™ Web
Service. (See "Setting authentication for authorized user" on
page 74.)
6. Select the Index number, from 1 to 20.
7. Enter a name in Alias for the Setup. This name will be displayed on
your machine.
8. Select IP Address or Host Name.
9. Enter the server address in dotted decimal notation or a host name.
10. Enter the server port number, from 1 to 65535.
The default port number is 139.
11. Enter the Share name of the server.
12. Check the box next to Anonymous if you want to permit unauthorized
persons to access the SMB server.
This box is unchecked by default.
13. Enter the User Name and User Password.
14. Enter the User Domain.
4. Press Scan to PC.
5. Make sure Network PC is shown.
If neccessary, press the right arrow to toggle from Local PC to Network
PC.
6. Select ID and enter Password, which you have set from the Scan and
Fax Manager 2.
7. Press Login.
8. Select one from the application list and press Select.
9. Select the scanning setting, such as the resolution or original size.
10. Press Start on the control panel to start scanning.
11. The original will be scanned and sent to your computer.
You can change the scanner properties of your machine and the scan
settings from the Scan and Fax Manager 2 window. Click Properties
and set the options in each tab. (See "Using Scan and Fax Manager
15. Enter the Scan File Folder for storing the scanned image.
Example: C://Documenets and settings/user/FTP server
16. Click Apply.
Scanning and sending to SMB/FTP server
1. Press Scan from the main screen.
SCANNING ORIGINALS AND SENDING VIA
SMB/FTP (SCAN TO SERVER)
If the authentication message shows, enter Auth. ID, Password
and Realm Name. This message shows only when the network
administrator has set the authentication in SyncThru™ Web
Service. (See "Setting authentication for authorized user" on
page 74.)
You can scan an image and send it to a total of five destinations via the
SMB or FTP.
Setting up an FTP server
To use an FTP server, you need to set up parameters to access the FTP
servers using SyncThru™ Web Service.
2. Press Scan to Server.
3. Load originals face up into the document feeder, or place a single
original face down on the scanner glass.
1. Turn your networked computer on and open the web browser.
2. Enter your machine's IP address as the URL in a browser.
3. Click Go to access the SyncThru™ Web Service.
4. Click Machine Settings > FTP Setup > Server List.
5. Click Add.
4. Adjust the document settings in the Image tab.
5. Select Duplex and Resolution in the Basic tab.
6. Select the destination SMB server from the server list.
You can select up to five destinations using both of SMB or FTP
servers.
6. Select the Index number, from 1 to 20.
7. Enter a name in Alias for the Setup. This name will be displayed on
your machine.
8. Select IP Address or Host Name.
9. Enter the server address in dotted decimal notation or a host name.
10. Enter the server port number, from 1 to 65535.
The default port number is 21.
7. Press Start on the control panel.
The machine begins scanning and then sends the scanned image to the
specified server.
SETTING AUTHENTICATION FOR AUTHORIZED
USER
11. Check the box next to Anonymous if you want the FTP server to permit
access to unauthorized people.
This box is unchecked by default.
If you have connected your machine to a network and set up the network
parameters correctly, you can scan and send images over the network.
12. Enter the Login Name and Login Password.
13. Enter the Scan File Folder for saving the scanned image.
Example: C://Documenets and settings/user/FTP server
14. Click Apply.
To send a scanned image through email or via network server safely, you
must register account information of authorized users to your local machine
or to the network server using SyncThru™ Web Service.
•
If user authentication has been activated, only authorized local users or
on the server (SMB, LDAP, Kerberos) can send scanned data to the
Scanning_ 74
Download from Www.Somanuals.com. All Manuals Search And Download.
network (email, FTP, SMB).
4. Enter the IP address in dotted decimal notation or as a host name.
5. Enter the server port number, from 1 to 65535.
The default port number is 139.
6. User can add a backup domain as in the previous step.
7. Click Apply.
•
•
For network scanning using the authentication feature, you must register
the network or local authentication configuration using the SyncThru™
Web Service.
User authentication has 3 options: No Authentication (Default),
Require Network Authentication, and Require Local Authentication.
User can add up to 6 optional domains.
Registering local authorized users
LDAP
1. Select LDAP.
2. Click Apply.
1. Turn your networked computer on and open the web browser.
2. Enter your machine's IP address as the URL in a browser.
3. Click Go to access the SyncThru™ Web Service.
4. Click Machine Settings > User Authentication.
5. Select Require Local Authentication in the Setup section.
3. Click OK in the modifying confirmation pop-up window.
4. Click LDAP Server Setup in the left pane.
5. Select IP Address or Host Name.
6. Enter the IP address in dotted decimal notation or as a host name.
7. Enter the server port number, from 1 to 65535.
The default port number is 389.
If you have not set Default[From:] Address in SMTP Client
Setup, the notifying pop-up window appears. Click OK to browse
the Web page where you can set the default email address.
6. Click Apply.
8. Enter Search Root Directory, the top search level of the LDAP
directory tree.
7. Click OK in the modifying confirmation pop-up window.
8. Select Local Authentication in the left pane.
9. Click Add.
10. Select an index number corresponding to the location for storing the
entry, from 1 to 50.
11. Enter your name, auth ID, password, e-mail address and phone number.
You need to enter the registered user ID and password in the machine
when you start scanning to email from the control panel.
12. Click Apply.
9. Select Authentication method. Two options for LDAP server login.
•
Anonymous: This is used to bind with null password and login
ID (Password and login ID are grayed out in SWS).
•
Simple: This is used to bind with the login ID and password in
SWS.
10. Check the box next to Append Root to Base DN.
11. Select Match User’s Login ID to the following LDAP attribute
(options are CN, UID, or UserPrincipalName).
12. Enter your login name, password, maximum number of search
results and search timeout.
Register network authorized users
LDAP Referral: LDAP client will search referral server if the
LDAP server has no data to reply to query and if the LDAP
server has a referral server.
1. Turn your networked computer on and open the web browser.
2. Enter your machine's IP address as the URL in a browser.
3. Click Go to access the SyncThru™ Web Service.
4. Click Machine Settings > User Authentication.
13. Select Search Name Order that you desire.
5. Select Require Network Authentication in the Setup section.
14. Check the box next to "From:" Field Security Options.
If you have not set Default[From:] Address in SMTP Client
Setup, the notifying popup window appears. Click OK to browse
the web page where you can set the default email address.
This option is only provided if you have selected the Network
authentication option in the user authentication setting. You
may check this option if you want to search for information in a
default email address group.
6. Click Apply.
15. Click Apply.
7. Click OK in the modifying confirmation popup window.
8. Select the Authentication Type that you prefer.
Configure the values for each feature, as follows:
USING SCAN AND FAX MANAGER 2
Kerberos
1. Select Kerberos.
If you have installed the printer driver, Scan and Fax Manager 2 program
has installed too. Start Scan and Fax Manager 2 program to find out about
this program information and the installed scan driver's condition. Through
this program, you can change scan settings and add or delete the folders
where scanned documents are saved in your computer.
2. Enter the Default Realm used for Kerberos login.
3. Select IP Address or Host Name.
4. Enter the IP address in dotted decimal notation or as a host name.
5. Enter the server port number, from 1 to 65535.
The default port number is 88.
Scan and Fax Manager 2 program can only be used in the Window
and Macintosh system. If you use the Macintosh, See "Setting scan
6. You can add a backup domain as a previous step.
7. Click Apply.
1. From the Start menu, click Samsung Printers > Scan and Fax
Manager 2.
SMB
1. Select SMB.
2. Enter the domain that is used for SMB login.
3. Select IP Address or Host Name.
You can open Scan and Fax Manager 2 by right clicking the Smart
Panel icon in the Windows task bar and seleting Scan and Fax
Manager 2.
Scanning_ 75
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Select the appropriate machine from the Scan and Fax Manager 2
scan with.
window.
3. Press Properties.
4. The Set Scan Button tab allows you to change the saving destination
and scan settings, add or delete application program, and format files.
5. When setting is done, press OK.
-
-
Prompt for additional pages: If this check box is checked, you can
scan pages continuously. This option is useful when you scan
multi-page documents and/or when Document Source is set to
Flatbed (scanner glass). In this case a sequence of scanned images
is processed as a single document.
Pages to Scan: Allows you to specify how many pages are to be
scanned. This option is available when Document Source is set to
ADF Simplex, ADF Duplex - Short Edge, and ADF Duplex - Long
Edge.
Set Scan Button tab
Scan Destination
•
Preference: The following scan options are available.
•
Available Destination List: Shows the list of applications currently
linked to scanned images in the PC’s registry. Select the program
you want to use and click the right arrow and add to Front Panel
Destination List.
-
-
-
Auto crop image after preview: If this option is checked, the
scanning area will be automatically adjusted to the image size.
Preview on program start: If this option is checked, the scanning
area will be selected automatically as shown in the preview.
Blank page detection: This operation automatically detects whether
the scanned image is blank or not.
•
•
•
•
Front Panel Destination List: Shows the list of applications to
open scanned image.
Add Application: Allows you to add application you want to use to
Available Destination List,
Remove Application: Allows you to remove an item added by the
user in the Available Destination List.
File Format: Allows you to select the form of scanned data to be
saved. You can choose among BMP, JPEG, PDF, and TIFF.
-
-
Delete page: Blank pages will be deleted at the end of the
scanning process.
Separate files: Blank page will work as a scan job separator.
That is, when multiple pages are scanned at once a blank page
will divide scanned image sequence into parts. Each part will be
treated as a separate document (group).
Scan Property
•
Advanced: In the Advanced mode, additional options such as Image
Adjustment, Image Enhancement, and Additional Settings are
available.
•
Computer ID: Shows the ID of your computer.
•
Save Location: Allows you to choose the location of the default
saving folder.
-
Image Adjustment: Allows you to perform some transformations of
the scanned image. These transformations include automatic
adjustment of image size, straightening and rotation.
Image Enhancement: Allows you to remove various defects of the
image and improve its quality.
Additional settings: Allows special processing of scanned images.
These transformations include stitching several partial image scans
into a single image, processing of scanned books and watermark
stamping.
•
•
•
•
Resolution: Allows you to choose the scan resolution.
Scan Color: Allows you to choose the scan color.
Scan Size: Allows you to choose the scan size.
ADF Duplex: Automatically scans both sides. If your model does
not support this option, it will be grayed out.
-
-
•
Default: Allows you to go back to default options.
Scan Assistant
When you press Quick Scan in Scan and Fax Manager 2, the Scan
Assistant window appears. Scan Assistant allows you to adjust scan
settings and start the scanning process.
In the Basic mode, Scan settings and Preferences are available only. If
you want to use more settings, press Advanced.
CHANGING THE SCAN FEATURE SETTINGS
This section explains how to adjust the document settings for each scan job,
such as resolution, duplex, original size, type, color mode, darkness, and
more. The settings you change will be maintained for a certain time, but
after that period, the options will be reset to default values.
Click the Help button from the lower-left corner of the window and
click on any option you want to know about. Then a pop up window
appears with information about that option's feature which is provided
from the Scan Assistant.
Duplex
This feature especially applies when the original documents to be scanned
are two sided. You can select whether the machine scans only one side or
both sides of the paper.
•
•
Favorites: Allows you to save the current preferences settings for future
use. When you save Favorites, all current scan settings are saved. To
use a saved setting, select it from the Favorites drop down list. The
machine is now set to scan according to the setting you selected. To
delete saved setting, select it from the Favorites drop down list and click
Delete. To set a favorite as startup, select the favorite you want to set as
startup, then click the Set as default button.
Press Scan > Scan to Email (or Scan to PC or Scan to Server) > the
Basic tab > Duplex. Use left/right arrows to toggle the values.
•
•
•
1 Sided: For originals that are printed on one side only.
2 Sided: For originals that are printed on both sides.
2 Sided, Rotate Side 2: For originals that are printed on both sides, but
the back is rotated 180 degrees.
Scan settings: The following scan options are available.
-
Image Type: Allows you to chose the proper color settings for image
scanning.
To use 2 Sided and 2 Sided, Rotate Side 2, load the originals on the
document feeder. If the machine cannot detect the original on the
document feeder, it automatically changes the option to 1 Sided.
-
-
Resolution: Allows you to choose the image resolution.
Document Size: Allows you to choose the proper size of the
scanned image.
-
Document Source: Allows you to choose the device you want to
Scanning_ 76
Download from Www.Somanuals.com. All Manuals Search And Download.
Resolution
Erase Background
You can adjust document resolution.
You can lighten, reduce or deletes the dark background from scanning
colored paper or newspaper originals.
Press Scan > Scan to Email (or Scan to PC or Scan to Server) > the
Basic tab > Resolution. Use left/right arrows to toggle the values. The
higher value you select, clearer the result. But the scanning time may take
longer.
100 dpi, 200 dpi and 300 dpi resolution are available only when Color Mode
is set to Color or Gray.
Press Scan > Scan to Email (or Scan to PC or Scan to Server) > the
Image tab > Erase Background. Select On and press OK.
•
•
•
Off: Sets this option off.
Auto: Automatically adjusts background brightness.
Enhance: Darkens the background. Use left/right arrows to toggle the
values.
RESOLUTION
FEATURE
FILE FORMAT
•
Erase: Lightens the background. Use left/right arrows to toggle the
values.
(DPI)
Scan to Email
100, 200, 300, 400, PDF, Single-Page TIFF,
600 Multi-Page TIFF, JPEG
Darkness
You can select the degree of darkness of the scanned output. If your
original document is light or faded, press the right arrow to make the output
darker.
Scan to PC
100, 200, 300, 400, PDF, TIFF, JPEG
600
Scan to Server
100, 200, 300, 400, PDF, Single-Page TIFF,
Press Scan > Scan to Email (or Scan to PC or Scan to Server) > the
Image tab > Darkness. Press right arrow to enhance the darkness degree ,
then press OK.
600
Multi-Page TIFF, JPEG
Original Size
Erase Background
You can lighten, reduce or delete the dark background from scanning
colored paper or newspaper originals.
You can specify the scanning area on the originals by selecting the
pre-defined size, putting in the margin value or Auto. If you set this option to
Auto, the machine senses and determines the size of the original.
Press Scan > Scan to Email (or Scan to PC or Scan to Server) > the
Image tab > Erase Background. Select the appropriate option and press
OK.
From the main screen, press Scan > Scan to Email (or Scan to PC or
Scan to Server) > the Advanced tab > Original Size. Use up/down arrows
to go to the next screen. Select the appropriate option and press OK.
•
•
•
Off: Sets this option off.
Auto: Automatically adjusts background brightness.
Enhance: Darkens the background. Use left/right arrows to toggle the
values. The higher the number is, the more vivid the background is.
Original Type
You can set the original document type in order to enhance the quality of a
document being scanned.
Press Scan > Scan to Email (or Scan to PC or Scan to Server) > the
Image tab > Original Type. Select the appropriate option and press OK.
•
Erase: Lightens the background. Use left/right arrows to toggle the
values. The higher the number is, the lighter the background is.
•
•
•
Text: For originals that have text or line art.
Text/Photo: For originals that have both text and photographs together.
Photo: For originals that are continuous tone photographs.
Scan to Edge
You can set the machine to scan full size of a page as it is. Usually, the
machine scans a page except edges, which means the margin, especially
when you do the copy job with certain sized paper in the tray. But if you
scan and sent it right away via the network, as the file, the machine does not
need to exclude the edges from the originals.
Color Mode
Use this option to scan the original in Mono, Gray or Color Mode.
Press Scan > Scan to Email (or Scan to PC or Scan to Server) > the
Image tab > Color. Select the appropriate option and press OK.
•
•
Press Scan > Scan to Email (or Scan to PC or Scan to Server) > the
Image tab > Scan to Edge. Select On and press OK.
Color: Displays an image in color. 24 bits per pixel.
Gray: Displays an image in gray. 8 bits per pixel.
Quality
You can use this option to produce a high quality document. The higher the
quality you select, the larger the file size.
Press Scan > Scan to Email (or Scan to PC or Scan to Server) > the
Output tab > Quality.
•
Mono: Displays an image in black and white. 1 bit per pixel.
When you set Color Mode to Mono, the Quality option is grayed out.
File Format
You can select the file format before you proceed with the scanning job.
Press Scan > Scan to Email (or Scan to PC or Scan to Server) > the
Output tab > File Format.
The file format JPEG cannot be selected in the File Format option, if
Mono has been selected for Color Mode.
•
•
PDF: Scans originals in PDF format.
Single-Page TIFF: Scans originals in TIFF (Tagged Image File
Format), but several originals are scanned as one file.
•
Multi-Page TIFF: Scans the originals in TIFF (Tagged Image File
Format), and several originals are scanned as several file.
Scanning_ 77
Download from Www.Somanuals.com. All Manuals Search And Download.
•
•
JPEG: Scans original in JPEG format.
BMP: Scans original in BMP format.
7. Click Next.
8. Enter a picture name, and select a file format and destination to save the
picture.
The file format JPEG cannot be selected in the File Format option, if
Mono has been selected for Color Mode.
9. Your picture has been successfully copied to your computer. Choose
one of the options on screen.
10. Click Next.
11. Click Finish.
Scan Preset
This feature allows you to use optimized settings for your specific scan job.
Press Scan > Scan to Email (or Scan to PC or Scan to Server) > the
Output tab >Scan Preset.
Windows Vista
1. Make sure that the machine is connected to your computer and powered
•
•
•
•
•
•
Sharing and Printing: Produces a small-sized file for normal quality
documents.
High Quality Printing: Produces a high quality output with the largest
file size.
Archival Record: For the electronic file which is of the smallest file size
of the output.
OCR: Produces scanned output for OCR software. You can expect the
highest quality images.
on.
2. Load originals face up into the document feeder, or place a single
original face down on the scanner glass.
3. From the Start menu select Control Panel > Hardware and Sound >
Scanners and Cameras.
4. Double click Scan a document or picture. Windows Fax and Scan
application appears.
Simple Scan: Used for a simple document with text only. The file size
of output is small.
Custom: Applies the current scan settings that you have chosen.
•
You can click on View scanners and cameras to view
scanners,
•
If there is no Scan a document or picture, open the MS paint
program and from the File click From Scanner or Camera... .
SCANNING WITH TWAIN-ENABLED SOFTWARE
5. Click New Scan. Scan driver appears.
6. Choose your scanning preferences and click Preview to see your
If you want to scan documents using other softwares, you will need to use
TWAIN-compliant software, such as Adobe Photoshop.
preferences affect the picture.
7. Click Scan.
Follow the steps below to scan with TWAIN-compliant software:
If you want to cancel the scan job, press the Cancel button on the
1. Make sure that the machine is connected to your computer and powered
Scanner and Camera Wizard.
on.
2. Load originals face up into the document feeder, or place a single
Windows 7
original face down on the scanner glass.
1. Make sure that the machine is connected to your computer and powered
on.
3. Open an application, such as Adobe Photoshop.
4. Open the TWAIN window and set the scan options.
5. Scan and save your scanned image.
2. Load originals face up into the document feeder, or place a single
original face down on the scanner glass
3. From the Start menu select Control Panel > Hardware and Sound >
SCANNING USING THE WIA DRIVER
Devices and Printers.
4. Click right button of mouse on device driver icon in Printers and Faxes
> Start Scan. New Scan application appears.
5. Choose your scanning preferences and click Preview to see your
preferences affect the picture.
6. Click Scan.
Your machine also supports the Windows Image Acquisition (WIA) driver for
scanning images. WIA is one of the standard components provided by
Microsoft Windows XP and works with digital cameras and scanners. Unlike
the TWAIN driver, the WIA driver allows you to scan and easily adjust
images without using additional software.
The WIA driver works only on Windows XP/Vista with a USB port.
MACINTOSH SCANNING
Windows XP
You can scan documents using Image Capture program. Macintosh OS
offers Image Capture program.
1. Make sure that the machine is connected to your computer and powered
on.
2. Load originals face up into the document feeder, or place a single
Scanning with USB
original face down on the scanner glass.
1. Make sure that the machine is connected to your computer and powered
3. From the Start menu, select Control Panel, > Scanners and Cameras.
4. Double click your scanner driver icon. The Scanner and Camera
Wizard appears.
5. Click Next.
6. Set the option in Choose scanning preferences window and click
on.
2. Load originals face up into the document feeder, or place a single
original face down on the scanner glass.
3. Start Applications and click Image Capture.
Preview to see how your options affect the picture.
If No Image Capture device connected message appears,
Scanning_ 78
Download from Www.Somanuals.com. All Manuals Search And Download.
disconnect the USB cable and reconnect it. If the problem
continues,refer to the Image Capture’s help.
1. From the Smart Panel menu on Status bar, click Scan and Fax
Manager.
2. Select the appropriate machine from the Scan and Fax Manager .
3. Press Properties.
4. Use Set Scan Button to change the file destination or scan settings,
to add or delete application programs, and to format files. You can
change the scanning machine by using Change port. (Local or
Network)
4. Set the scan options on this program.
5. Scan and save your scanned image.
•
For more information about using Image Capture, refer to the
Image Capture’s help.
•
•
Use TWAIN-compliant softwares to apply more scan options.
You can also scan using TWAIN-compliant software, such as
Adobe Photoshop.
5. When done, press OK.
•
If scanning does not operate in Image Capture, update Mac OS to
the latest version. Image Capture operates properly in Mac OS X
10.3.9 or higher and Mac OS X 10.4.7 or higher.
LINUX SCANNING
You can scan a document using the Unified Driver Configurator window.
Scanning with network
1. Make sure that the machine is connected to your computer and powered
Scanning
1. Double-click the Unified Driver Configurator on your desktop.
on.
2. Click the
button to switch to Scanners Configuration.
2. Load originals face up into the document feeder , or place a single
original face down on the scanner glass.
3. Select the scanner on the list.
3. Start Applications and click Image Capture.
4. For Mac OS X 10.4 ~ 10.5
Click Devices and click Browse Devices.
For Mac OS X 10.6
Select your device below SHARED. Skip to step 7.
5. For Mac OS X 10.4:
Select your machine in Twain devices option. Make sure that Use
TWAIN software checkbox is checked, and click Connect.
•
•
If a warning message appears, click Change Port.. to select port.
If TWAIN UI appears, from the Preference tab, click Change Port..
to select port.
Refer to Scan and Fax Manager for Change Port.. use. (See
page 79.)
If you use only one machine device and it is connected to the computer
and turned on, your scanner appears on the list and is automatically
selected.
If you have two or more scanners connected to your computer, you can
select any scanner to work at any time. For example, while acquisition is
in progress on the first scanner, you may select the second scanner, set
the device options and start the image acquisition simultaneously.
For Mac OS X 10.5:
Make sure that Connected checkbox is checked beside your machine in
Bonjour Devices.
If you want to scan using TWAIN, refer to the Mac OS X10.4 steps
above.
6. Set the scan options on this program.
4. Click Properties.
7. Scan and save your scanned image.
5. Load originals face up into the document feeder, or place a single
•
For more information about using Image Capture,refer to the
Image Capture’s help.
Use TWAIN-compliant softwares to apply more scan options.
You can also scan using TWAIN-compliant softwares, such as
Adobe Photoshop.
original face down on the scanner glass.
6. From the Scanner Properties window, click Preview.
The document is scanned and the image preview appears in the
•
•
•
If scanning does not operate in Image Capture, update Mac OS to
the latest version. Image Capture operates properly in Mac OS X
10.3.9 or higher and Mac OS X 10.4.7 or higher.
Setting scan information in Scan and Fax Manager
To find out about Scan and Fax Manager program information, to check
the installed scan driver's condition, to change scan settings. and to add
or delete the folders where scanned documents to computer are saved
in Scan and Fax Manager program, follow these instructions:
Scanning_ 79
Download from Www.Somanuals.com. All Manuals Search And Download.
Preview Pane.
To delete a Job Type setting
1. Select the setting you want to delete from the Job Type drop-down
list.
2. Click Delete.
The setting is deleted from the list
Using the Image Manager
The Image Manager application provides you with menu commands and
tools to edit your scanned image.
7. Drag the pointer to set the image area to be scanned in the Preview
Pane.
8. Change the scan options in the Image Quality and Scan Area sections.
•
Image Quality: This option allows you to select the color
composition and the scan resolution for the image.
•
Scan Area: This option allows you to select the page size. The
Advanced button enables you to set the page size manually.
Use the following tools to edit the image:
If you want to use one of the preset scan option settings, select the
Click Default to restore the default setting for the scan options.
9. When you have finished, click Scan to start scanning.
The status bar appears on the bottom left of the window to show you the
progress of the scan. To cancel scanning, click Cancel.
10. The scanned image appears.
If you want to edit the scanned image, use the toolbar. (See "Using the
11. When you are finished, click Save on the toolbar.
12. Select the file directory where you want to save the image and enter the
file name.
13. Click Save.
Adding Job Type Settings
You can save your scan option settings for later use.
To save a new Job Type setting:
1. Change the options from the Scanner Properties window.
2. Click Save As.
3. Enter the name for your setting.
4. Click OK.
Your setting is added to the Saved Settings drop-down list.
To save a Job Type setting for the next scan job:
1. Select the setting you want to use from the Job Type drop-down list.
2. The next time you open the Scanner Properties window, the saved
setting is automatically selected for the scan job.
Scanning_ 80
Download from Www.Somanuals.com. All Manuals Search And Download.
TOOLS
NAME
Save
FUNCTION
Saves the image.
Undo
Redo
Cancels your last action.
Restores the action you canceled.
Scroll
Crop
Allows you to scroll through the image.
Crops the selected image area.
Zoom Out
Zoom In
Zooms the image out.
Zooms the image in.
Scale
Allows you to scale the image size; you can
enter the size manually, or set the rate to scale
proportionally, vertically, or horizontally.
Rotate
Flip
Allows you to rotate the image; you can select
the number of degrees from the drop-down list.
Allows you to flip the image vertically or
horizontally.
Brightness Allows you to adjust the brightness or contrast of
the image, or to invert the image.
Properties Shows the properties of the image.
For further details about the Image Manager application, refer to the on
screen help.
Scanning_ 81
Download from Www.Somanuals.com. All Manuals Search And Download.
16.
using usb memory device
This chapter explains how to use a USB memory device with your machine.
This chapter includes:
•
•
•
•
•
Insert a USB memory device into the USB memory port on your machine.
ABOUT USB MEMORY DEVICE
USB memory devices are available with a variety of memory capacities to
give you more room for storing documents, presentations, music and
videos, high resolution photographs, or whatever other files you want to
store or move.
You can do the following on your machine using an USB memory device:
•
•
•
Scan documents and save them on an USB memory device.
Print data stored on an USB memory device.
Format the USB memory device.
Your machine supports USB memory devices with FAT16/FAT32 and
sector size of 512 bytes.
Check your USB memory device’s file system from your dealer.
You must use only an authorized USB memory device with an A plug type
connector.
Use only an USB memory device with metal-shielded connector.
•
•
Do not remove the USB memory device while it is in use. The
machine warranty does not cover damage caused by user’s
misuse.
If your USB memory device has certain features, such as security
settings and password settings, your machine may not
automatically detect it. For details about these features, see USB
memory device’s User’s Guide.
UNDERSTANDING THE USB SCREEN
To use the USB feature, press USB on the main screen. If the screen
displays another menu, press (
) to go to the main screen.
Using USB memory device_ 82
Download from Www.Somanuals.com. All Manuals Search And Download.
When an USB memory is inserted into the USB memory port on your
machine, USB icon shows on the screen.
Resolution
You can adjust document resolution.
Press USB > Scan to USB > the Basic tab >Resolution. Use left/right
arrows to toggle the values. The higher value you select the clear result you
get. But the scanning time may take longer.
From the USB screen, press USB Format or, USB Print or, Scan to USB.
•
USB Format: You can delete files stored on an USB memory device
one by one or all at once by reformatting the device.
•
USB Print: You can directly print files stored on an USB memory
device. You can print TIFF, BMP, JPEG, PDF, and PRN files. (See
Original Size
You can adjust document size.
Press USB > Scan to USB > the Advanced tab > Original Size. Select the
appropriate option and press OK.
•
Scan to USB: You can scan a data and send directly to USB memory
device. You can specify image size, file format, or color mode for each
scanning to USB job. (See "Scanning to an USB memory device" on
page 83.)
Original Type
You can set the original document type in order to enhance the quality of a
document being scanned.
SCANNING TO AN USB MEMORY DEVICE
Press USB > Scan to USB > the Image tab >Original Type. Select the
appropriate option and press OK.
You can scan a document and save the scanned image onto an USB
memory device. When you scan a document, the machine uses the default
settings such as the resolution. You can also customize your own scan
•
•
•
Text: Use for originals containing mostly text.
Text/Photo: Use for originals with mixed text and photographs.
Photo: Use when originals are photographs.
1. Insert a USB memory device into the USB memory port on your
machine.
Color Mode
2. Place the originals face up in the document feeder. Or place a single
original face down on the scanner glass.
3. Press USB from the main screen.
Use this option to scan the original in Mono, Gray or Color Mode.
Press USB > Scan to USB > the Image tab > Color Mode. Select the
appropriate option and press OK.
4. Press Scan to USB.
5. Set the scan features in the Advanced, Image, or Output tabs. (See
•
•
Color: Displays an image in color. 24 bits per pixel.
Gray: Displays an image in gray. 8 bits per pixel.
6. Press Start on the control panel to begin scanning.
7. After scanning is complete, you can remove the USB memory device
from the machine.
•
Mono: Displays an image in black and white. 1 bit per pixel.
CHANGING THE SCAN FEATURE SETTINGS
This part explains how to adjust the document settings for each scan job,
such as resolution, duplex, original size, original type, color mode,
darkness, and more. The options you change will be maintained for a
certain time, but after a period, the options will be reset to default values.
The file format JPEG cannot be selected in the File Format option, if
Mono has been selected for Color Mode.
Duplex
Darkness
This feature especially applies when the original documents to be scanned
are two-sided. You can select whether to scan only one side of the paper or
both sides of the paper.
You can select the degree of darkness of the scanned output. If your
original document is light or faded, press the right arrow to make the output
darker.
Press USB > Scan to USB > the Basic tab > Duplex. Use left/right arrows
to toggle the values.
Press USB > Scan to USB > the Image tab > Darkness. Press right arrow
to enhance the darkness degree then, press OK.
•
•
•
1 Sided: For originals that are printed on one side only.
2 Sided: For originals that are printed on both sides.
2 Sided, Rotate Side 2: For originals that are printed on both sides. But
the back is rotated 180 degrees.
Erase Background
You can lighten, reduce or delete the dark background from scanning
colored paper or newspaper originals.
To use 2 Sided and 2 Sided, Rotate Side 2, you have to load the
originals on the document feeder. Because, if the machine can not
detect the original on document feeder, it automatically changes the
option to 1 Sided.
Press USB > Scan to USB > the Image tab > Erase Background. Select
the appropriate option and press OK.
•
•
•
Off: Sets this option off.
Auto: Automatically adjusts background brightness.
Enhance: Darkens the background. Use left/right arrows to toggle the
values. The higher the number is, the more vivid the background is.
•
Erase: Lightens the background. Use left/right arrows to toggle the
values. The higher the number is, the lighter the background is.
Using USB memory device_ 83
Download from Www.Somanuals.com. All Manuals Search And Download.
Scan to Edge
PRINTING FROM A USB MEMORY DEVICE
You can set the machine to scan full size of a page as it is. Usually, the
machine scans a page except edges, which means the margin, especially
when you do the copy job with certain sized paper in the tray. But if you
scan and sent it right away via the network, as the file, the machine does not
need to exclude the edges from the originals.
You can directly print files stored on a USB memory device. You can print
TIFF, BMP, JPEG, and PRN files.
Direct Print option supported file types:
•
PRN: Only files created by provided driver with your machine are
compatible. PRN files can be created by selecting the Print to file check
box when you print a document. The document will be saved as a PRN
file, rather than printed on paper. Only PRN files created in this fashion
can be printed directly from USB memory device. (See "Printing to a file
Press USB > Scan to USB > the Image tab > Scan to Edge. Select On and
press OK.
Quality
You can use this option to produce a high quality document. Higher quality
you select a larger file size you get.
•
•
•
•
BMP: BMP Uncompressed
TIFF: TIFF 6.0 Baseline
JPEG: JPEG Baseline
PDF: PDF 1.4 and below
Press USB > Scan to USB > the Output tab > Quality. Select the
appropriate option and press OK.
When you set Color Mode to Mono, the Quality option is grayed out.
To print a document from a USB memory device:
Scan Preset
1. Insert a USB memory device into the USB memory port on your
This feature allows you to use optimized settings for your specific scan job.
machine.
Press USB > Scan to USB > the Output tab >Scan Preset. Select the
appropriate option and press OK.
Your machine automatically detects the device and reads data stored on
•
•
•
•
•
•
Sharing and Printing: Produces a small-sized file for normal quality
documents.
High Quality Printing: Produces a high quality output with the largest
file size.
Archival Record: For the electronic file which is of the smallest file size
of the output.
OCR: Produces scanned output for OCR software. You can expect the
highest quality images.
2. Press USB from the main screen.
3. Use up/down arrows until the file you want appears.
Select the file name.
If the file is in a folder, select the folder name.
Press Select.
4. Press USB Print.
5. Press the Start button on the control panel.
Simple Scan: Used for a simple document with text only. The file size
of output is small.
Custom: Applies the current scan settings that you have chosen.
File Format
You can select the file format before you proceed with the scanning job.
Press USB > Scan to USB > the Output tab > File Format. Select the
appropriate option and press OK.
•
•
PDF: Scans originals in PDF format.
Single-Page TIFF: Scans originals in TIFF (Tagged Image File
Format), but several originals are scanned as one file.
•
Multi-Page TIFF: Scans the originals in TIFF (Tagged Image File
Format), and several originals are scanned as several file.
•
•
JPEG: Scans original in JPEG format.
BMP: Scans original in BMP format.
The file format JPEG cannot be selected in the File Format option, if
Mono has been selected for Color Mode.
File Policy
You can choose the policy for generating file name before you proceed with
the scan job through USB. If the USB memory already has the same name
when you entered a new file name, you can rename or overwrite it.
Press USB > Scan to USB > the Output tab > File Policy. Select the
appropriate option and press OK.
•
Rename: If the USB memory already has the same name when you
enter a new file name, the file will be saved as a different name which is
automatically programmed.
•
Overwrite: You can set the machine to delete previous job information
on USB as you store new job information.
Using USB memory device_ 84
Download from Www.Somanuals.com. All Manuals Search And Download.
17.
machine status and advanced feature
This chapter explains how to browse the current status of your machine, and the method of setting for the advanced
machine setup. Read this chapter carefully in order to use your machine's diverse features.
This chapter includes:
•
•
•
•
•
•
•
•
•
•
•
Back: Returns to the previous screen.
MACHINE SETUP
1. Press Machine Setup on the control panel.
2. Select the appropriate item you want to use.
BROWSING THE MACHINE’S STATUS
You can browse the machine information and validate some features of the
machine.
1. Press Machine Setup on the control panel.
2. Press Machine Status > the Machine Info tab.
OPTION
DESCRIPTION
Machine Details
This option shows the customer support
information on the email address and the phone
number you stored from Admin Setting. Also,
you can check the machine's serial number, or
the hardware and software information
specification.
•
•
Machine Status: Shows the current machine status.
Admin Setting: Allows administrator to set up the machine.
When you press Admin Setting, a login message pops up. Enter
password and press OK. (Factory setting is 1111.)
Usage Page Report: You can print the report on the amount of
printouts depending on the paper size and type.
Print/Report
You can print various helpful and informative
reports, such as System Report, Fax Report
•
Machine Status screen
Tray Status
The screen shows the trays installed on your
machine and their current configurations.
Press Machine Setup on the control panel, then press Machine Status.
•
•
•
Supplies Life tab: Displays both the amount of machine supplies used
and remaining. Use up/down arrows to switch screens.
Machine Info tab: Displays detailed information about the machine, as
well as some options to allow validating your machine.
Usage Counters
You can view the amount of each category that
your machine has printed so far. Print this
Back: Returns to the previous screen.
GENERAL SETTINGS
Admin Setting screen
Gives you access to detailed machine settings.
Before using the machine, set up the machine parameter, as follows:
1. Press Machine Setup on the control panel.
2. Press Admin Setting. When the login message pops up, enter
password and press OK. (Factory setting is 1111.)
3. Press the General tab.
When you press Admin Setting, a login message appears. If the
administrator set the password, you have to enter the password every
•
•
•
General tab: Sets the basic parameters of the machine, such as
Setup tab: Sets the values for fax, network, and login. You can also
enable the features listed on the screen.
Print/Report tab: Prints configuration or font list and displays a report
Machine status and advanced feature_ 85
Download from Www.Somanuals.com. All Manuals Search And Download.
OPTION
DESCRIPTION
OPTION
Device Info
DESCRIPTION
Tray Management
Allows you to select the tray and paper for a
printing job. Tray Confirmation Message
activates the window asking whether you set the
paper size and type for the tray that was just
opened.
The sub-options available are Service Center
Registration and Contact Info. You may enter
information on service center and purchasing
point.
Date & Time
You can set the date and time. (See "Setting the
•
Auto Tray Switch: With this option On and
both tray1 and tray2 are filled with letter size
paper, the machine automatically prints from
tray2 after tray1 is empty.
Auto Continue: When the paper is
mismatched, meaning that tray1 has filled
with the letter size paper, but the printing job
needs A4 size paper, the machine will wait
for 30 seconds for paper in tray1 with proper
sized paper. After 30 seconds, the machine
automatically starts printing with letter-sized
paper.
Default Settings
•
Default Window: Set the first window that
appears on the display screen after the
machine wakes up from the Power Save
mode. For example, if you select Fax as a
default window, the first window will be the
Basic tab of the Fax feature. If you want to
show ID Copy as a default window, you need
to enable this feature in Default Option.
•
•
•
Default Option: Changes all the default
values for copying, faxing, emailing, scanning
and paper at once. (See "Changing the
Home: Allows user to arrange each function
in the display screen.
Altitude Adjustment
Print quality is affected by atmospheric pressure.
The atmospheric pressure is determined by the
height of the machine above sea level. This
feature lets you adjust the altitude in a height
district. The higher the altitude, the higher the
adjustment, the highest being High 1. (See
Depending on the optional kit installed or
the category selected, the selectable
options on the display screen may differ.
Contention
Management
This feature lets you to select the priority
between copy jobs and print jobs.
Measurements
Timers
This option lets you change the unit of (mm or
inch) and set the numeric separation (comma or
period).
•
Priority: Set the priority by numbering the
job. The machine starts from the least to the
highest number in order.
The machine cancels a printing job if data is not
received in specific time.
•
First In, First Out: The machine does an
asked job in order.
•
System Timeout: The machine returns to
the default value after waiting a certain
length of time.
Sound
You can adjust the noise level of the machine
sound. Press Fault to adjust the machine's error
sound. Select Conflict if you pressed the wrong
option. Press Selection to have the machine
make a sound whenever you press the selection
from your touch screen.
You can set a time for maximum 10 minutes.
•
Held Job Timeout: The machine holds a
job for a specific time period.
Language
Allows you to change the language that appears
on the touch screen.
Supplies
Management
The machine notifies you when to reorder toner
cartridge and resets the used fuser counter, bias
transfer roller, feed roller and document feeder
friction pad counter.
Power Saver
Reduce energy consumption by setting power
saving features. (See "Using power saving
Machine Test
You can test the machine by using the Image
Quality Test Patterns and Loopback Test.
On Demand
Overwrite
You can set the machine to delete previous job
information on HDD when you store new job
information. To activate this feature, go to
Admin Setting > the Setup tab > Optional
Service.
Set the On Demand Image Overwrite option to
Enable. After activating this feature, you can
overwrite an HDD by pressing Start in the
display.
Machine status and advanced feature_ 86
Download from Www.Somanuals.com. All Manuals Search And Download.
OPTION
DESCRIPTION
OPTION
DESCRIPTION
HDD Spooling
To spool documents in HDD for the network
printing, select On.
Machine ID & Fax
No.
Enter the machine ID and fax number which will
be printed at the top of each page. This option is
usually pre-set for user.
Stored Job File
Policy
You can choose the file policy for generating file
name before proceeding with the job through the
HDD. If the HDD memory already has the same
name when you entered a new file name, you
can either rename or overwrite it.
Receive Start
Code
This feature works best when you are using an
extension telephone connected to the EXT socket
at the back of your machine. You can receive a fax
from with whom you are talking on the extension
telephone, without going to the fax machine. (See
•
Rename: If your HDD memory already has
the same name when you enter a new file
name, the file will be saved as a different
name that is automatically programmed.
Error Correction
Mode
It helps with poor line quality and ensures any
faxes you send are properly transmitted to any
other ECM-equipped fax machines. Sending a fax
using ECM may take more time.
•
Overwrite: You can set the machine to
delete previous job information on HDD as
you store new job information
Country
When you change the country, some of the
values for fax and paper size will be changed
automatically for the country specified.
Fax Initial Setup
You can set Receive Mode for Telephone, Fax or
Answering Machine/Fax, and Dial Mode at
either Tone or Pulse.
When you select Answering Machine/Fax, you
can receive a fax while the line is being used by
the answering machine. (See "Changing the
COPY SETUP
For copy output, you can set up several options in advance.
Contact your local telephone company for Dial
Mode setting information.
1. Press Machine Setup on the control panel.
2. Press Admin Setting. When the login message pops up, enter
password and press OK.
3. Press the Setup tab > Copy Setup.
Ring to Answer
Receive Header
You can specify the number of times the machine
rings before answering an incoming call.
Use this option to automatically print the page
number, date, and time of fax reception at the
bottom of each page.
OPTION
DESCRIPTION
Page Number
If you select option On, each copy will include the
page number on the bottom of each page.
Secure Receive
You may need to prevent your received faxes from
being accessed by unauthorized people. This
feature restricts printing of received faxes when
the machine is unattended. If you select this
option to On, all incoming faxes go into memory.
A four-digit Passcode is used when you want to
print out received faxes in memory. (See
Time & Date
ID Stamp
Set from the General tab, select this option On to
print the date and time on each copy,
This option is used to set words or a message to
be printed on your copies. Set this option On; an
input screen will be displayed. Write your
message using the pop up keyboard.
Received Fax
Printing
Sets the printing method for the received fax.
•
Auto Reduction: When receiving a fax
containing pages longer than the paper loaded
in the tray, the machine can reduce the size of
the original to fit the size of the paper. If this
feature is set to Off, the machine cannot
reduce the original to fit onto one page. The
original will be divided and printed in actual
size on two or more pages. For example, this
option is set to Off and Discard Size to 10
mm, but the received data is longer then the
currently set paper in the tray, the machine
omits printing the data that would have been
on the specified discard segment.
FAX SETUP
This machine offers you various options for setting up the fax system. You
can change the default settings for your preferences and needs, as follows:
1. Press Machine Setup on the control panel.
2. Press Admin Setting. When the login message pops up, enter
password and press OK.
3. Press the Setup tab > Fax Setup.
The fax options are different from country to country depending on the
International Communications Regulatory. If some of the fax options
explained in the instructions have been grayed out, it means that the
grayed-out function is not supported in your communication
environment.
•
•
Duplex: Print the received fax on both sides
of papers.
Stapled: If a machine is equipped with a
staper feature, you can use this option a set of
received fax to be stapled.
Machine status and advanced feature_ 87
Download from Www.Somanuals.com. All Manuals Search And Download.
OPTION
Redial
DESCRIPTION
OPTION
DESCRIPTION
If recipient’s fax machine is busy or not answering,
the machine can automatically redial a remote fax
machine. You can set the number of redial
attempts and the interval between attempts.
Selecting 0 for Redial Times means that the
machine will not redial.
Send Batch
If the fax number you have dialed is the same as
the delay fax number, the machine asks whether
you want to add the documents to the reserved
delay fax. (See "Adding documents to a reserved
Fax Forward
Settings
You can forward a sent or received fax to other
destinations via fax or email. (See "Forwarding a
Speaker Volume
This controls the sound when a fax actually starts
to transfer data. If this option is On, the machine
emits sound from the beginning to the completion
of a fax. With Comm, the machine emits sound
only until the communication has succeeded.
There is no sound with Off option.
Fax Ending Sound This setting determines whether the end fax tone
is on or off. When the fax receiving job is finished,
machine will give an signal sound. (See "Setting
Prefix Dial
This feature allows you to set a prefix of up to five
digits. User may set this to access a
PABX(example *9) or area code number (example
02).
NETWORK SETUP
You may set up the network with the machine's touch screen. Before doing
that, you must have the relevant information concerning the type of network
protocols and computer system you use. If you are not sure which setting to
use, contact your network administrator to configure this machine to the
network.
Junk Fax Setup
The machine does not accept faxes sent from
remote stations if their numbers are stored in the
memory as junk fax numbers. You can enter a
maximum of 10 junk fax numbers. Press Junk
Fax Setup, select number and Edit. then, enter
the last numbers (1~7 digit) of the fax number.
1. Press Machine Setup on the control panel.
2. Press Admin Setting. When the login message pops up, enter
password and press OK.
3. Press the Setup tab > Network Setup.
Ring Volume
This feature adjusts the ring volume. When you
select Off, the machine does not ring.
Dial Tone Volume
When you press On Hook Dial to send a fax, you
can hear a specific tone. To adjust the tone
volume, use this feature. Value 1 is the lowest
volume. Use left/right arrows to adjust the value.
OPTION
DESCRIPTION
TCP/IP Protocol
Select appropriate protocol and configure
parameters to use the network environment.
Mailbox Setup
•
Document Policy: You can set the document
stored in Mailbox to delete or retain documents
after completion. Select On for each option to
delete, Off to retain the data.
There are lots of parameters to be set.
Therefore, if you are not sure, leave as is, or
consult the network administrator.
Ethernet Speed
Clear Setting
Configure the network transmission speed.
•
Mail Configuration: You can create, edit, or
delete Mailbox. Enter Mailbox ID, Mailbox
Name, Mailbox Passcode by pressing options.
Reverts the network settings to the default values.
If you set the Notification option to On, you
are notified when a fax is received in
page 68.)
Output Tray
Toll Save
This feature lets you select the paper tray to use
for receiving a fax.
Set the machine to send a fax in the toll save time
for saving. (See "Sending a fax in toll save time"
Machine status and advanced feature_ 88
Download from Www.Somanuals.com. All Manuals Search And Download.
1. Press Machine Setup on the control panel.
2. Press Admin Setting. When the login message pops up, then enter
AUTHENTICATION
password and press OK.
3. Press the Print/Report tab.
This feature lets you control and lock all outgoing data, or change the
password.
1. Press Machine Setup on the control panel.
2. Press Admin Setting. When the login message pops up, then enter
password and press OK.
3. Press the Setup tab > Authentication.
OPTION
Print
SUB-OPTION
DESCRIPTION
You can print Network
Configuration, PS3 Font List,
PCL Font List and Schedule
Jobs Report. Schedule Jobs
Report shows the job list in
pending, in delayed faxing or the
Mailbox list as well.
OPTION
SUB-OPTION
DESCRIPTION
Authentication
Mode
Network
Accounting
Enables authentication mode
which can be used for job
accounting plug-in in the
SyncThru™Web Admin Service .
Accounting
Reports
Supplies
Information
You can print the amount of each
category that your machine has
printed so far.
No
It disables Authentication Mode.
Authentication
Mode
Network Auth.
Log Report
It displays user login IDs and
email.
Change Admin. Password
You can change the password for
the Admin Setting authentication.
Usage Page
Report
You can print a report on the
number of printouts based on
paper size and type.
OPTIONAL SERVICE
Accounting
Report
You can print a report on the
number of printouts for each login
user.
When you want to add the optional features for this machine, you have to
install the optional kit, and then, set the machine to enable, and activate
those features. To enable those features, follow the steps below:
Report
Configuration
Report
You can print a report on the
machine's overall configuration.
1. Press Machine Setup on the control panel.
2. Press Admin Setting. When the login message pops up, then enter
password and press OK.
3. Press the Setup tab > Optional Service.
OPTION
N/W Scan
DESCRIPTION
If you are not using the network scan feature,
select Disable, then the Scan icon on the display
will be grayed out.
Analog Fax
If you are not using the fax feature, select Disable,
then the fax icon on the display will be grayed out.
On Demand Image This feature is deleting all the information on HDD
Overwrite
for security reasons. You cannot recover the
information once it’s been deleted. System
administrator deletes all the information on HDD.
From the General tab, select On Demand
Overwrite > Enable.
Immediate Image
Overwrite
This feature is deleting a specific job information
on HDD for security reasons. After a job stored on
the HDD is completed, it’s information is
automatically deleted. You cannot recover the
information once it’s been deleted. From the
General tab select Immediate Image
Overwrite>Enable.
PRINTING A REPORT
You can print a report on the machine's configuration or font list, etc.
Machine status and advanced feature_ 89
Download from Www.Somanuals.com. All Manuals Search And Download.
MENU OVERVIEW
OPTION
SUB-OPTION
Fax Report
DESCRIPTION
The control panel provides access to various menus to set up the machine
or use the machine's functions. These menus can be accessed by pressing
Machine Setup, Job Status, or touching menus on the display screen.
Refer to the following table.
You can set to print the
information of a fax reports.
•
Multi Send Report: When
you fax to several destinations,
set this option to print a
transmission report. Select On
to print out a confirmation
report every time you send a
fax. Select On-Error to print
out a report only when a
Some menus may not appear in the display depending on options or
models. If so, it is not applicable to your machine.
Main screen
The main screen is shown on the display screen on the control panel. Some
menus are grayed out depending on your model.
transmission error occurs.
•
•
Fax Send Report
Appearance: You can select
whether the image on the
confirmation report shows or
not.
Fax Sent/Received Report:
Select On to have the machine
store all transmission logs and
print out after every 50 logs.
Select Off to have the machine
store the log but not print out.
•
Fax Send Report: The
machine prints the
confirmation report after each
fax job, only when you send a
fax to one destination.
E-mail
Confirmation
Report
The report shows the job of
scanning and sending it via Scan
to Email.
•
On: A report is printed
whether a job is successfully
completed or not.
•
•
Off: No report is printed.
On-Error: A report is printed
only when an error occurs.
Scan to Server The report shows the job of
Confirmation
scanning and sending it via SMB
and FTP.
•
On: A report is printed
whether a job is successfully
completed or not.
•
•
Off: No report is printed.
On-Error: A report is printed
only when an error occurs.
You can also print the machine's status information and browse status
with SyncThru™ Web Service. Open the Web browser on your
networked computer and type the IP address of your machine. When
SyncThru™ Web Service opens, click Information > Print
information.
Machine status and advanced feature_ 90
Download from Www.Somanuals.com. All Manuals Search And Download.
ITEMS
OPTION
ITEMS
OPTION
Scan
Scan to Email
Basic
Copy
Basic
Original Size
Advanced
Image
Output
Reduce/Enlarge
Duplex
Output
Original Type
Darkness
Paper Supply
Scan to PC
Basic
Advanced
Image
Output
Advanced
ID Copy
N-Up
Poster Copy
Clone Copy
Book Copy
Booklet
Scan to Server
Basic
Advanced
Image
Output
Covers
Transparencies
Image
Stored Documents
Public
Detail
Edit
Erase Edge
Erase Background
Margin Shift
Delete
Delete All
Print
Secured
Detail
Edit
Fax
Basic
Address
Duplex
Resolution
Delete
Print
Advanced
Original Size
Delay Send
Priority Send
Polling
USB
USB Format
USB Print
Scan to USB
Basic
Mailbox
Image
Advanced
Image
Original Type
Darkness
Output
Erase Background
Color Mode
Machine Setup button
When you press the Machine Setup button on the control panel, the
screen displays three menus. Machine Status shows the supplies life,
counters and reports. Admin Setting lets you set the advanced setup to
use your machine in depth and conveniently. Usage Page Report prints a
report on the number of printouts based on the paper size and type.
Machine Status
ITEMS
OPTION
Supplies Life
Toner Cartridge
Fuser Kit
Feed Roller Kit-Tray 1
Feed Roller Kit-Tray 2
Feed Roller Kit-Bypass Tray
BTR Kit
Machine Info
Machine Details
Tray Status
Print/Report
Usage Counters
Machine status and advanced feature_ 91
Download from Www.Somanuals.com. All Manuals Search And Download.
Admin Setting
ITEMS
OPTION
General
Device Info
Date&Time
Default Settings
Measurements
Timers
Language
Power Saver
Tray Management
Altitude Adjustment
Contention Management
Sound
Supplies Management
Machine Test
On Demand Overwrite
HDD Spooling
Stored Job File Policy
Country
Setup
Copy Setup
Fax Setup
Network Setup
Authentication
Optional Service
Print/Report
Print
Accounting Reports
Report
Usage Page Report
When the display “Are you sure you want to print it” appears, press
Yes.
Job Status button
This menu shows the job in process, jobs waiting and, in completed, and
ITEMS
OPTION
Current Job
Detail
Delete
Delete All
Close
Completed Job
Active Notice
Detail
Close
Detail
Close
Machine status and advanced feature_ 92
Download from Www.Somanuals.com. All Manuals Search And Download.
18.
management tools
This chapter introduces management tools provided to help you make full use of your machine.
This chapter includes:
•
•
•
•
•
•
•
•
•
Network Settings: This tab allows you to view and change the network
environment. You can set things, such as TCP/IP and so on.
Maintenance: This tab allows you to maintain your machine by
upgrading firmware and setting security information.
Support: This tab allows you to set contact information for sending
email. You can also connect to SEC website or download drivers by
selecting Link.
INTRODUCING USEFUL MANAGEMENT TOOLS
The programs below help you to use your machine conveniently.
•
•
•
•
•
E-mail Notification Setup
You can receive emails about your machine’s status by setting this option.
USING SYNCTHRU™ WEB SERVICE
1. Start a web browser, such as Internet Explorer, from Windows.
Enter the machine IP address (http://xxx.xxx.xxx.xxx) in the address
field and press the Enter key or click Go.
2. Your machine’s embedded website opens.
3. From the Machine Settings, select E-mail Notification Setup.
4. Set required settings.
If you have connected your machine to a network and set up TCP/IP
network parameters correctly, you can manage the machine via
SyncThru™Web Service, an embedded web server. Use SyncThru™Web
Service to:
•
•
•
•
•
View the machine’s device information and check its current status.
Change TCP/IP parameters and set up other network parameters.
Change printer preference.
Set the email notifications advising of the machine’s status.
Get support for using the machine.
5. Click Apply.
USING THE SMART PANEL PROGRAM
Smart Panel is a program that monitors and informs you of the machine
status, and allows you to customize the machine’s settings. For Winodws
and Macintosh, Smart Panel is installed automatically when you install the
machine software. For Linux, you can download Smart Panel from
To access SyncThru™Web Service:
1. Start a web browser, such as Internet Explorer, from Windows.
2. Enter the machine IP address (http://xxx.xxx.xxx.xxx) in the address
field and press the Enter key or click Go.
Your machine’s embedded website opens.
3. Click Login.
The log-in window appears.
4. Enter the administrator’s ID and password then click Login.
To use this program, you need the following system requirements:
•
Windows. Check for windows operating system(s) compatible with
•
•
Mac OS X 10.3 or higher
Linux. Check for Linux systems that are compatible with your
•
•
Enter the same administrator’s ID and password to the touh
screen.
•
Internet Explorer version 5.0 or higher for flash animation in HTML
Help.
If you do not login with administrator’s ID and password, you
can see the machine’s information only.
If you need to know the exact model name of your machine, you can
check the supplied software CD.
5. Change the settings as you want such as the machine settings, network
parameters, etc.
Understanding Smart Panel
If an error occurs while printing, you can check the error from the Smart
Panel.
You can also launch Smart Panel manually. Double-click the Smart Panel
icon on the Windows task bar (in Windows), or Notification Area (in Linux).
You can also click it on the status bar (in Mac OS X).
SyncThru™Web Service overview
•
Information: This tab gives you general information about your
machine. You can check things, such as the machine’s IP address,
remaining amount of toner, ethernet information, firmware version, and
so on. You can also print reports such as an error report and so on.
•
Machine Settings: This tab allows you to set options provided by your
machine.
Management tools_ 93
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the Smart Panel Program Settings
Right-click (in Windows or Linux) or click (in Mac OS X) the Smart Panel
icon and select Options. Select the settings you want from the Options
window.
Windows
Double-click this icon in Windows.
Macintosh
Linux
Click this icon in Mac OS X.
Click this icon in Linux.
SMARTHRU OFFICE
The supplied software CD provides you with SmarThru Office. SmarThru
Office offers you convenient features to use with your machine.
Or, if you are a Windows user, you can launch it from the Start menu, select
Programs or All Programs > your printer driver name > Smart Panel.
•
If you have already installed more than one Samsung machine,
first select the correct machine model you want in order to access
the corresponding Smart Panel.
Starting SmarThru Office
Follow the steps below to start SmarThru Office:
1. Make sure that your machine and computer are turned on and properly
Right-click (in Windows or Linux) or click (in Mac OS X) the Smart
Panel icon and select your machine.
connected to each other.
2. Once you have installed SmarThru Office, you will see the SmarThru
Office icon on your desktop.
3. Double-click the SmarThru Office icon.
•
The Smart Panel window and its contents shown in this user’s
guide may differ depending on the machine or operating system in
use.
The Smart Panel program displays the current status of the machine, the
level of toner remaining in the toner cartridge(s), and various other types of
information. You can also change settings.
4. The SmarThru Office appears.
For more information, click Help > SmarThru Office help.
Quick Start Guide
This menu displays direct buttons for some features. The direct buttons
include: Categories, Binder, Life Cycle, Scan and OCR, Fix and
Enhance, and Samsung Website. You can disable this menu by checking
“Do not show this diaglog again”.
Toner Level
View the level of toner remaining in the toner
cartridge(s). The machine and the number of toner
cartridge(s) shown in the above window may differ
depending on the machine in use. Some machines
do not have this feature.
1
2
Using SmarThru Office
Buy Now
Order replacement toner cartridge(s) online.
Scanning
1. Click scan icon.
User’s Guide
View User’s Guide.
•
In Windows XP operating system, you can use SmarThru
Office launcher, which is on the right end of taskbar, to
easily open the Scan Setting window.
This button changes to Troubleshooting
Guide when error occurs. You can directly
open troubleshooting section in the user’s
guide.
3
Printer
Setting
Configure various machine settings in the Printer
Settings Utility window. Some machines do not
have this feature.
•
In other operating systems beside Windows XP, click the
4
5
If you connect your machine to a network,
the SyncThru™ Web Service window
appears instead of the Printer Settings Utility
window.
SmarThru icon
to activate the SmarThru Office launcher.
in the tray area of the windows taskbar
Driver Setting Set all of the machine options you need in the
Printer Preferences window. This feature is
available only for Windows. (See "Understanding
Opening the Troubleshooting Guide
Find solutions for problems by using the Troubleshooting Guide.
Right-click (in Windows or Linux) or click (in Mac OS X) the Smart Panel
icon and select Troubleshooting Guide.
Management tools_ 94
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Scan Setting window opens.
Follow the steps below to uninstall SmarThru Office.
Before you begin the uninstall, ensure that all applications are
closed on your computer.
a) From the Start menu, select Programs or All Programs.
b) Select SmarThru Office, and then select Uninstall SmarThru
Office.
c) When your computer asks you to confirm your selection, read
the statement and click OK.
d) Click Finish.
USING SETIP PROGRAM
Macintosh and Linux do not support this program.
This program is for the network IP setting using the MAC address which is
the hardware serial number of the network printer card or interface.
It is especially for the network administrator to set several network IPs at the
same time.
Select
Scanner
Allows you to select between the Local or Network
scanner.
1
2
3
4
You can only use the SetIP program when your machine is connected
to a network.
Select
Profile
Allows you to save settings frequently used for
future use. Click New Profile to save the setting.
Scan
Settings
Allows you to customize settings for Scan Size
and Paper Source.
Installing the program
1. Insert the software CD provided with your machine. When the software
CD runs automatically, close the window.
2. From the Start menu select My Computer and open the X drive. ( X
Scan To
Allows you to customize settings for File Name
and location to send scanned data.
represents your CD-ROM drive.)
3. Double click Application > SetIP.
4. Double-click Setup.exe to install this program.
5. Click OK.
Click Advanced button to set more scan options.
3. Set scan settings and click Scan.
For more information, click Help > SmarThru Office help.
6. If necessary, select a language from the drop-down list..
7. Follow the instructions in the window to complete the installation.
Send to
FTP
You can upload files to an FTP server while working on SmarThru
Office.
Printing out the machine’s MAC address
1. Press Machine Setup on the control panel.
2. Press Machine Status > the Machine Info tab > Print/Report.
3. Press System Report.
1. Select File > Send to > Send By FTP.
2. Send By FTP window opens.
3. Add your file and click Upload.
4. Scroll down the list on the right and select Network Configuration
Report.
5. Press Print
Email
You can send email while working on SmarThru Office.
You need an email client program, such as Outlook Express, to
send email in SmarThru Office. Procedure for sending email may
differ depending on email client program you are using.
Setting network values
1. Print the machine’s Network Configuration Report to find your
machine’s MAC address.
1. Select File > Send to> Send By E-mail.
2. An email client opens.
2. From the Windows Start menu, select Programe or All Programs >
Samsung Network Printer Utilities > SetIP > SetIP.
3. Type in necessary information and send your email.
3. Click to open the TCP/IP configuration window.
4. Enter the network card’s MAC address, IP address, subnet mask,
Fax
default gateway, and then click Apply.
You can send emails while working on SmarThru Office.
1. Select File > Send to > Send By Fax.
2. Send Fax window opens.
When you enter the MAC address, enter it without a colon(:).
5. Click OK. The machine prints the network information. Confirm the
settings are correct.
3. Type in necessary information and click Send Fax.
6. Click Exit.
For more information about SmarThru Office, click Help >
SmarThru Office help. The SmarThru Office Help window
appears; you can view on screen help supplied on the SmarThru
program.
Management tools_ 95
Download from Www.Somanuals.com. All Manuals Search And Download.
Printers tab
USING THE LINUX UNIFIED DRIVER
CONFIGURATOR
View the current system’s printer configuration by clicking on the
machine icon button on the left side of the Unified Driver Configurator
window.
Unified Driver Configurator is a tool primarily intended for configuring
machine devices. You need to install Unified Linux Driver to use Unified
Driver Configurator (See "Installing the Linux Unified Driver" on page 27).
After the driver is installed on your Linux system, the Unified Driver
Configurator icon will automatically be created on your desktop.
Opening the Unified Driver Configurator
1. Double-click the Unified Driver Configurator on the desktop.
You can also click the Startup Menu icon and select Samsung Unified
Driver > Unified Driver Configurator.
2. Click each button on the left to switch to the corresponding configuration
window.
Switches to Printers configuration.
Shows all of the installed machine.
1
2
3
Shows the status, model name and URI of your machine.
The printer control buttons are, as follows:
1 Printers
Configuration
2 Scanners
•
•
•
•
Refresh: Renews the available machines list.
Add Printer: Allows you to add a new machines.
Remove Printer: Removes the selected machine.
Configuration
3 Ports
Configuration
Set as Default: Sets the current selected machine as a default
machine.
To use the on screen help, click Help.
•
•
Stop/Start: Stops/starts the machine.
Test: Allows you to print a test page to ensure the machine is
working properly.
3. After changing the configurations, click Exit to close the Unified Driver
Configurator.
•
Properties: Allows you to view and change the printer properties.
Printers configuration
Printers configuration has the two tabs: Printers and Classes.
Management tools_ 96
Download from Www.Somanuals.com. All Manuals Search And Download.
•
Properties: Allows you to change the scan properties and scan a
document.
Classes tab
The Classes tab shows a list of available machine classes.
Ports configuration
In this window, you can view the list of available ports, check the status of
each port and release a port that is stalled in a busy state when its owner
has terminated the job for any reason.
Shows all of the machine classes.
1
2
Shows the status of the class and the number of machines in the
class.
•
•
•
Refresh: Renews the classes list.
Add Class: Allows you to add a new machine class.
Remove Class: Removes the selected machine class.
Switches to Ports configuration.
1
Shows all of the available ports.
2
Shows the port type, device connected to the port, and status
3
Scanners configuration
In this window, you can monitor the activity of scanner devices, view a list of
installed Samsung machine devices, change device properties, and scan
images.
•
•
Refresh: Renews the available ports list.
Release port: Releases the selected port.
Sharing Ports Between Printers and Scanners
Your machine may be connected to a host computer via a parallel port
or USB port. Since the machine device contains more than one device
(printer and scanner), it is necessary to organize proper access of
“consumer” applications to these devices via the single I/O port.
The Unified Linux Driver package provides an appropriate port sharing
mechanism that is used by Samsung printer and scanner drivers. The
drivers talk to their devices via so-called machine ports. The current
status of any machine port can be viewed via the Ports configuration.
The port sharing prevents you from accessing one functional block of
the machine device, while another block is in use.
When you install a new machine device onto your system, it is strongly
recommended you do this with the assistance of an Unified Driver
Configurator. In this case you will be asked to choose I/O port for the
new device. This choice will provide the most suitable configuration for
machine’s functionality. For machine scanners, I/O ports are being
chosen by scanner drivers automatically, so proper settings are applied
by default.
Switches to Scanners configuration.
1
Shows all of the installed scanners.
2
Shows the vendor, model name and type of your scanner.
3
Management tools_ 97
Download from Www.Somanuals.com. All Manuals Search And Download.
19.
maintenance
This chapter provides information for maintaining your machine and the toner cartridge.
This chapter includes:
•
•
•
•
•
•
•
•
•
Clearing fax memory by printing a fax job
PRINTING A MACHINE REPORT
Print received fax job. Fax memory will automatically be erased.
You can print the machine's information and job report.
1. Press Machine Setup on the control panel.
2. Press Machine Status > the Machine Info tab > Print/Report.
Clearing fax memory without printing a fax job
From the Job Status > Current Job tab in the fax’s main LCD.
3. Select the report type, then the right side of the screen shows the list to
•
To erase all the jobs on the list, click Delete All.
This option erases all the jobs in the memory, be careful not to erase
jobs other than a fax job.
print.
4. Select the list to print.
5. Press Print.
•
To erase only fax jobs on the list, select fax jobs with in the Job Type list
and click Delete.
•
•
If you want to print the machine's network information or font list,
press Machine Setup > Admin Setting > the Print/Report tab >
Report. If you select the Configuration Report, press Print to
print the report. The Fax Report, E-mail Confirmation Report,
and Scan to Server Confirmation options do not provide the
print, these are only for report setup.
You can use SyncThru™ Web Service to print the machine's
configuration or browse the status. Open the web browser in the
networked computer and type the machine's IP address. When
SyncThru™ Web Service opens, click Information > Print
Information.
SENDING THE TONER REORDER
NOTIFICATION
To set the machine to alert when the toner level is low and needs to be
reordered, do the following:
1. Press Machine Setup on the control panel.
2. Press Admin Setting. When the login message pops up, enter the
password and press OK.
3. Press the General tab > Supplies Management > Toner Cartridge
Reorder Notification.
4. Press Toner Reorder at Life Remaining and select a percentage.
MONITORING THE SUPPLIES LIFE
5. Press OK.
To view the supply life indicators, follow the steps below:
1. Press Machine Setup on the control panel.
2. Press Machine Status.
CHECKING STORED DOCUMENTS
3. Check the used count of each supply item.
The machine shows the document list of the print or fax job.
Press Stored Documents on the main screen. If the screen displays
FINDING THE SERIAL NUMBER
another menu, press (
) to go to the main screen.
•
•
Public tab: Shows the job list of delay print and store print job.
Secured tab: Shows the job list of secure print, secure receive, and
secure store print job.
User Name: Shows the user name who registered the job.
To check your serial number from the screen, follow the steps below:
1. Press Machine Setup on the control panel.
2. Press Machine Status > the Machine Info tab > Machine Details.
•
•
File Name: Shows the job name, which is registered as the job
CLEARING FAX MEMORY
information. For computer printing, the file name shows.
Date: Shows the date the job was registered.
Page: Shows the total page number of the job.
Detail: A separate message appears showing the basic job information
with file size, paper size and paper type.
Edit: Lets you modify the file name.
Delete: Deletes the selected list.
•
•
•
You can erase fax memory. There are two ways to erasing fax memory,
follow the steps below:
If you are clearing fax memory without printing a fax job, you are
erasing it without checking the content. Be careful not to an erase
important document.
•
•
Maintenance_ 98
Download from Www.Somanuals.com. All Manuals Search And Download.
•
•
Delete All: Deletes the whole list.
Print: Prints the selected list.
3. With a dry, lint-free cloth, wipe away any dust and spilled toner from the
toner cartridge area.
CLEANING A MACHINE
If printing quality problems occur or if you use your machine in a dusty
enviroment, you need to clean your machine regularly to keep the best
printing condition and use your machine longer.
•
Cleaning the cabinet of the machine with cleaning materials
containing large amounts of alcohol, solvent, or other strong
substances can discolor or distort the cabinet.
•
If your machine or the surrounding area is contaminated with
toner, we recommend you use cloth or tissue dampened with
water to clean it. If you use a vacuum cleaner, toner blows in the
air and might be harmful to you.
While cleaning the inside of the machine, be careful not to damage
the transfer roller or any other inside parts. Do not use solvents
such as benzene or thinner to clean. Printing quality problems can
occur and cause damage to the machine.
Cleaning the outside
Clean the machine cabinet with a soft, lint-free cloth. Dampen the cloth
slightly with water, but be careful not to let any water drip onto or into the
machine.
4. Locate the long strip of glass (LSU) inside the top of the cartridge
Cleaning the inside
compartment and gently clean the glass with a swab.
During the printing process, paper, toner, and dust particles can accumulate
inside the machine. This buildup can cause print quality problems, such as
toner specks or smearing. Cleaning the inside of the machine clears and
reduces these problems.
1. Turn the machine off and unplug the power cord. Wait for the machine to
cool down.
2. Open the front cover and pull the toner cartridge out. Set it on a clean
flat surface
5. Reinsert the toner cartridge and close the front cover.
6. Plug in the power cord and turn the machine on.
Cleaning the scan unit
Keeping the scan unit clean helps ensure the best possible copies. We
suggest that you clean the scan unit at the start of each day and during the
day, as needed.
1. Slightly dampen a soft, lint-free cloth or paper towel with water.
2. Open the scanner lid.
3. Wipe the surface of the scanner glass and the document feeder glass
•
•
To prevent damage to the toner cartridge, do not expose it to
light for more than a few minutes. Cover it with a piece of
paper, if necessary.
Do not touch the green surface underside of the toner
cartridge. Use the handle on the cartridge to avoid touching
this area.
until it is clean and dry.
Maintenance_ 99
Download from Www.Somanuals.com. All Manuals Search And Download.
1 Scanner lid
2 Scanner glass
3 Document feeder
glass
4 White sheet
4. Wipe the underside of the scanner lid and white sheet until it is clean
and dry.
5. Close the scanner lid.
STORING THE TONER CARTRIDGE
To get the best, print quality from the toner cartridge, keep the following
guidelines in mind:
•
•
Do not remove the toner cartridge from its package until ready to use.
Do not refill the toner cartridge. The machine warranty does not cover
damage caused by using a refilled cartridge.
•
Store toner cartridges in the same environment as your machine.
Expected cartridge life
The life of the toner cartridge yield depends on the amount of toner that print
jobs require. The actual number may also be different depending on the
print density of the pages you print on, and the number of pages may be
affected by the operating environment, printing interval, media type, and
media size. If you print a lot of graphics, you may need to change the
cartridge more often.
TIPS FOR MOVING & STORING YOUR MACHINE
•
When moving the machine, do not tilt or turn it upside down. Otherwise,
the inside of the machine may be contaminated by toner, which can
cause damage to the machine or bad print quality.
•
•
When moving the machine, make sure at least two people are holding
the machine securely.
When moving the machine or when machine is not in use for a long time,
Maintenance_ 100
Download from Www.Somanuals.com. All Manuals Search And Download.
20.
troubleshooting
This chapter gives helpful information for what to do if you encounter an error.
This chapter includes:
•
•
•
•
•
•
place completely.
REDISTRIBUTING TONER
When the toner cartridge is near the end of its life:
•
•
•
White streaks or light printing occurs.
Toner is low. Order new toner cartridge appears on the display.
The Status LED blinks red.
If this happens, you can temporarily improve print quality by redistributing
the remaining toner in the cartridge. In some cases, white streaks or light
printing will still occur even after you have redistributed the toner.
1. Open the front cover.
2. Pull the toner cartridge out.
5. Close the front cover. Ensure that the cover is securely closed.
3. Thoroughly roll the cartridge five or six times to distribute the toner
evenly inside the cartridge.
CLEARING ORIGINAL DOCUMENT JAMS
When an original jams while passing through the document feeder, a
warning message appears on the display screen.
To avoid tearing the document, remove the jammed document slowly
and gently.
If toner gets on your clothing, wipe it off with a dry cloth and wash
clothing in cold water. Hot water sets toner into fabric.
To prevent document jams, use the scanner glass for thick, thin, or
mixed paper-type originals.
Do not touch the green underside of the toner cartridge. Use the
handle on the cartridge to avoid touching this area.
4. Hold the toner cartridge by the handle and slowly insert the cartridge into
the opening in the machine.
Tabs on the sides of the cartridge and corresponding grooves within the
machine will guide the cartridge into the correct position until it locks into
Troubleshooting_ 101
Download from Www.Somanuals.com. All Manuals Search And Download.
1. Remove any remaining pages from the document feeder.
2. Seize the misfeed paper, and remove the paper from the document
5. Open the document feeder inner cover. Gently remove the jammed
paper.
output tray by carefully pulling it to the right using both hands.
If you see no paper in this area, go to the next step
3. Open the document feeder cover.
If you see no paper in this area, go to step 7.
6. Close the document feeder inner cover and the document feeder cover.
Reload the pages you removed, if any, in the document feeder.
7. Open the scanner lid.
8. Grasp the misfeed paper and, using both hands, remove the paper from
the feed area by carefully pulling it to the right.
4. Gently remove the jammed paper from the document feeder.
1 scanner lid
9. Close the scanner lid. Load the removed pages back into the document
feeder.
TIPS FOR AVOIDING PAPER JAMS
By selecting the correct media types, most paper jams can be avoided.
When a paper jam occurs, refer to the next guidelines.
If you see no paper in this area, go to the next step
•
Ensure that the adjustable guides are positioned correctly. (See
Do not overload the tray. Ensure that the paper level is below the paper
capacity mark on the inside of the tray.
•
•
•
•
•
Do not remove paper from the tray while your machine is printing.
Flex, fan, and straighten paper before loading.
Do not use creased, damp, or highly curled paper.
Do not mix paper types in a tray.
Use only recommended print media. (See "Setting the paper size and
Troubleshooting_ 102
Download from Www.Somanuals.com. All Manuals Search And Download.
•
•
Ensure that the recommended side of the print media is facing down in
the tray, or facing up in the multi-purpose tray.
If paper jams occur frequently when you print on A5/B5-sized paper:
Load the paper into the tray with the long edge facing the front of the
tray.
3. Remove the jammed paper by gently pulling it straight out.
If load the paper this way, printing both sides of the paper (Duplex) is not
supported.
In the Printing Preferences window, set the page orientation to be
If the paper does not move when you pull, or if you do not see the paper
in this area, check the fuser area around the toner cartridge. (See
CLEARING PAPER JAMS
4. Insert tray 1 back into the machine until it snaps into place. Printing
When a paper jam occurs, a warning message appears on the display
screen.
automatically resumes.
To avoid tearing the paper, pull the jammed paper out slowly and
gently. Follow the instructions in the following sections to clear the
jam.
In optional tray 2
1. Pull out optional tray 2.
2. Remove the jammed paper from the machine.
In tray 1
1. Open and close the front cover. The jammed paper is automatically
ejected from the machine.
If the paper does not exit, go to the next step.
2. Pull out tray 1 .
If the paper does not move when you pull or if you do not see the paper
in this area, stop and go to the next step.
3. Pull tray 1 half-way out.
Troubleshooting_ 103
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Pull the paper straight up and out.
1. Open the front cover and pull the toner cartridge out, lightly pushing it
down.
2. Remove the jammed paper by gently pulling it straight out.
5. Insert the trays back into the machine. Printing automatically resumes.
In the multi-purpose tray
1. If the paper is not feeding properly, pull the paper out of the machine.
3. Replace the toner cartridge and close the front cover. Printing
automatically resumes.
In exit area
1. Open and close the front cover. The jammed paper is automatically
ejected from the machine.
2. Open and close the front cover to resume printing.
If you do not see the jammed paper, go to next step.
2. Gently pull the paper out of the output tray.
Inside the machine
The fuser area is hot. Take care when removing paper from the
machine.
If you do not see the jammed paper or if there is any resistance when
you pull, stop and go to the next step.
3. Open the rear cover.
Troubleshooting_ 104
Download from Www.Somanuals.com. All Manuals Search And Download.
4. If you see the jammed paper, push the pressure lever on each side up
7. While pushing the fuser lever to the right, open the fuser door.
and remove the paper. Skip to step 9.
8. Pull the jammed paper out.
If the jammed paper does not move when you pull, push the pressure
lever on each side up to loosen the paper, and then remove it.
If you still do not see the paper, go to the next step.
5. Release the strip, the rear cover stopper, and fully open the rear cover,
as shown.
9. Return the lever, door, stopper, and guide to their original position.
10. Close the rear cover. Printing automatically resumes.
In the duplex unit area
6. Unfold the duplex guide fully.
If the duplex unit is not inserted correctly, a paper jam may occur. Make
sure that the duplex unit is inserted correctly.
1. Pull the duplex unit out of the machine.
Troubleshooting_ 105
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Remove the jammed paper from the duplex unit.
6. Fold the duplex guide and close the rear cover.
If the paper does not come out with the duplex unit, remove the paper
from the bottom of the machine.
Insert the duplex unit into the machine.
If you still do not see the paper, go to the next step.
3. Open the rear cover.
4. Unfold the duplex guide fully.
5. Pull the jammed paper out.
Troubleshooting_ 106
Download from Www.Somanuals.com. All Manuals Search And Download.
UNDERSTANDING DISPLAY MESSAGES
SUGGESTED
SOLUTIONS
MESSAGE
MEANING
Messages appear on the control panel display to indicate the machine’s
status or errors. Refer to the tables below to understand the messages’ and
their meaning, and correct the problem, if necessary.
Original paper jam
while reversing
paper in scanner
The document failed
to activate the duplex
sensor within the
correct time while
reversing the
Lift up the document
input tray and remove the
jammed original. (See
"Clearing original
•
•
•
•
If a message is not in the table, reboot the power and try the
printing job again. If the problem persists, call for service.
When you call for service, provide the service representative with
the contents of display message.
Some messages may not appear in the display depending on
options or models.
[zzz] indicates the error code. When you contact the service
center, this error code help to handle the problem.
document.
Paper Jam at the
bottom of duplex
path
Paper has jammed
Clear the jam. (See "In
Paper Jam at the
top of duplex path
Paper has jammed
Clear the jam. (See "In
•
You may see an exclamation mark ( ) or a cross mark ( ) on
the upper left of the display, in that case, press the question mark
to browse detailed information on the supplies.
Paper Jam in exit
area
Paper has jammed in
the fuser area.
Clear the jam. (See "In
Paper Jam in MP
tray
Paper misfed from
multi-purpose tray
Clear the jam. (See "In
SUGGESTED
SOLUTIONS
MESSAGE
MEANING
Paper Jam in tray 1 Paper has jammed in
Clear the jam. (See "In
Fax memory is
There is no more
Print the received fax or
tray.
almost full. Print or available fax memory. delete them from the fax
Paper Jam in tray 2 Paper has jammed in
Clear the jam. (See "In
remove received
fax Job
No more fax data can memory. Call for service
be received. to delete fax memory.
tray.
Fax memory is full. Available fax memory Delete the received fax
Paper Jam inside
of duplex path
Paper has jammed
Clear the jam. (See "In
Print or remove
received fax Job
is now 1MB.
data in the memory to
secure memory. Call for
service.
Paper Jam inside
of machine
Paper has jammed in
the registration area.
Clear the jam. (See
Fuser error: [zzz].
Please turn off
then on
There is a problem in
Turn the machine off and
the fuser unit working. back on again. If the
problem persists, call for
service.
Scanner locking
switch is locked or Couple Device) lock
another problem
occurred
The CCD (Charged
Unlock the CCD lock.
(See "Front view" on
page 19. ) Or turn off the
machine and on again. If
the problem persists, call
for service.
LSU error: [zzz].
Please turn off
then on
There is a problem in
the control of LSU
unit.
Turn the machine off and
back on again. If the
problem persists, call for
service.
has been locked.
Original paper jam
in front of scanner
The originals are
jammed in document
feeder.
Open the document
feeder cover and remove
the jammed original.
Sensor failure:
[zzz]. Call for
service
There is a problem in
the sensor signal.
Turn the machine off and
back on again. If the
problem persists, call for
service.
Original paper jam
in front of scanner
duplex path
The originals are
jammed during duplex
printing in the
Clear the jam.
Shake toner
cartridge
The toner supply is
low.
Thoroughly roll the new
cartridge five or six times
to distribute the toner
evenly inside the
cartridge. (See
document feeder.
Original paper jam
inside of scanner
The failed to activate
the gate sensor within feeder cover and remove
Open the document
the correct time after
activating the scan
sensor.
When the machine is
on, jammed paper is
detected in the
the jammed original.
System error: [zzz]. There is a problem in
Please turn off
then on
Turn the machine off and
the system operation. back on again. If the
problem persists, call for
service.
document feeder.
Troubleshooting_ 107
Download from Www.Somanuals.com. All Manuals Search And Download.
SOLVING OTHER PROBLEMS
SUGGESTED
SOLUTIONS
MESSAGE
MEANING
The following chart lists some conditions that may occur and the
recommended solutions. Follow the suggested solutions until the problem is
corrected. If the problem persists, call for service.
This IP address
conflicts with an IP used elsewhere.
address already in
The IP address is
Check the IP address or
obtain a new IP address.
use. Check it
Touch screen problem
Toner cartridge is
not compatible.
Check user’s guide not for your machine.
The toner cartridge
you have installed is
Install a
CONDITION
SUGGESTED SOLUTIONS
Samsung-genuine toner
cartridge, designed for
your machine. (See
The touch screen
does not show
anything.
Turn the machine off and back on again. If the
problem persists, call for service.
Toner cartridge is
not installed.
Install it
The toner cartridge is
not installed or the
CRUM (Consumer
Replaceable Unit
Monitor) in the
Try to install or reinstall
the toner cartridge.
Paper feeding problems
CONDITION
SUGGESTED SOLUTIONS
Paper jams during
printing.
Clear the paper jam. (See "Clearing paper jams"
cartridge is not
properly connected.
Paper sticks
together.
•
Check the maximum paper capacity of the
tray. (See "Print media specifications" on
Toner cartridge is
worn. Replace with has run out. The
new one
The toner cartridge
You can select the option
among Stop, Continue.
If you select Stop, the
machine stops printing. If
you select Continue, the
machine keeps printing,
but the quality cannot be
guaranteed. (See
machine stops
printing.
•
Make sure that you are using the correct type
of paper. (See "Print media specifications" on
•
•
Remove paper from the tray and flex or fan
the paper.
Humid conditions may cause some paper to
stick together.
Multiple sheets of
paper do not feed.
Different types of paper may be stacked in the
tray. Load paper of only one type, size, and
weight.
Toner is empty.
Replace toner
cartridge
The toner cartridge
has reached the end
of its lifespan.
This message appears
when the toner is
completely empty, and
your machine stops
printing. Replace the
toner cartridge with a
Samsung-genuine toner
cartridge. (See
Paper does not feed
into the machine.
•
Remove any obstructions from inside the
machine.
•
•
•
Paper has not been loaded correctly. Remove
paper from the tray and reload it correctly.
There is too much paper in the tray. Remove
excess paper from the tray.
The paper is too thick. Use only paper that
meets the specifications required by the
Toner is low. Order The toner cartridge is
new toner
cartridge
Ensure a replacement
cartridge is in stock. (See
almost empty.
•
If an original does not feed into the machine,
the document feeder rubber pad may require
to be replaced. Contact a service
representative.
Troubleshooting_ 108
Download from Www.Somanuals.com. All Manuals Search And Download.
Printing problems
CONDITION
SUGGESTED SOLUTIONS
POSSIBLE
CAUSE
SUGGESTED
SOLUTIONS
The paper keeps
jamming.
•
•
There is too much paper in the tray. Remove
excess paper from the tray. If you are printing
on special materials, use the multi-purpose
tray.
An incorrect type of paper is being used. Use
only paper that meets the specifications
required by the machine. (See "Print media
There may be debris inside the machine.
Open the front cover and remove any debris.
If an original does not feed into the machine,
the document feeder rubber pad may need to
be replaced. Contact a service representative.
CONDITION
The machine
does not print.
The machine is not
receiving power.
Check the power cord
connections. Check the
power switch and the power
source.
The machine is not
selected as the
default machine.
Select your machine as your
default machine in your
Windows.
•
•
Check the machine for the following:
•
•
•
•
The front cover is not closed. Close the front
cover.
Paper is jammed. Clear the paper jam. (See
No paper is loaded. Load paper. (See "Loading
The toner cartridge is not installed. Install the
toner cartridge.
Transparenciesstick Use only transparencies specifically designed
together in the paper for laser printers. Remove each transparency as
exit.
it exits from the machine.
Envelopes skew or
fail to feed correctly. sides of the envelopes.
Ensure that the paper guides are against both
If a system error occurs, contact your service
representative.
The connection
Disconnect the machine
cable and reconnect it.
cable between the
computer and the
machine is not
connected properly.
The connection
cable between the
computer and the
machine is
If possible, attach the cable
to another computer that is
working properly and print a
job. You can also try using a
different machine cable.
defective.
The port setting is
incorrect.
Check the Windows printer
setting to make sure that the
print job is sent to the correct
port. If the computer has
more than one port, make
sure that the machine is
attached to the correct one.
The machine may
be configured
incorrectly.
Check the Printing
Preferences to ensure that
all of the print settings are
correct. (See "Opening
page 47.)
The printer driver
may be incorrectly
installed.
Repair the machine
software. (See "Installing
"Installing network
The machine is
malfunctioning.
Check the display message
on the control panel to see if
the machine is indicating a
system error. Contact a
service representative.
Troubleshooting_ 109
Download from Www.Somanuals.com. All Manuals Search And Download.
POSSIBLE
CAUSE
SUGGESTED
SOLUTIONS
POSSIBLE
CAUSE
SUGGESTED
SOLUTIONS
CONDITION
CONDITION
(Continued) The
machine does not is so big that the
print.
The document size
Get more hard disk space
and print the document
again.
The machine
prints, but the
text is wrong,
garbled, or
The machine cable
is loose or
defective.
Disconnect the machine
cable and reconnect. Try a
print job that you have
already printed successfully.
If possible, attach the cable
and the machine to another
computer that you know
works and try a print job.
Finally, try a new machine
cable.
hard disk space of
the computer is
insufficient to
incomplete.
access the print job.
The machine
selects print
materials from
the wrong paper
source.
The paper option
that was selected in applications, the paper
the Printing
Preferences may
For many software
source selection is found
under the Paper tab within
the Printing Preferences.
Select the correct paper
source. See the printer
driver help screen. (See
be incorrect.
The wrong printer
Check the application’s
driver was selected. printer selection menu to
ensure that your machine is
selected.
The software
application is
malfunctioning.
Try printing a job from
another application.
A print job is
extremely slow.
The job may be
very complex.
Reduce the complexity of
the page or try adjusting the
print quality settings.
The operating
system is
malfunctioning.
Exit Windows and reboot the
computer. Turn the machine
off and back on again.
Half the page is
blank.
The page
orientation setting
may be incorrect.
Change the page orientation
in your application. See the
printer driver help screen.
If you are in a DOS Change the language
The paper size and Ensure that the paper size in
machine may be
set incorrectly.
the paper size
settings do not
match.
the printer driver settings
matches the paper in the
tray.
Pages print, but
they are blank.
The toner cartridge
Redistribute the toner, if
Or, ensure that the paper
size in the printer driver
settings matches the paper
selection in the software
application settings you use.
is defective or out of necessary.
toner.
If necessary, replace the
toner cartridge.
The file may have
blank pages.
Check the file to ensure that
it does not contain blank
pages.
Some parts, such
as the controller or
the board, may be
defective.
Contact a service
representative.
The machine
does not print
Incompatibility
between the PDF
Printing the PDF file as an
image may enable the file to
PDFfile correctly. file and the Acrobat print. Turn on Print As
Some parts of
graphics, text, or
illustrations are
missing.
products.
Image from the Acrobat
printing options.
It will take longer to
print when you print a
PDF file as an image.
Troubleshooting_ 110
Download from Www.Somanuals.com. All Manuals Search And Download.
POSSIBLE
CAUSE
SUGGESTED
SOLUTIONS
CONDITION
Dropouts
SUGGESTED SOLUTIONS
CONDITION
If faded areas, generally rounded, occur
randomly on the page:
The print quality
of photos is not
good. Images are low.
The resolution of
the photo is very
Reduce the photo size. If
you increase the photo size
in the software application,
the resolution will be
reduced.
•
A single sheet of paper may be defective.
Try reprinting the job.
The moisture content of the paper is uneven
or the paper has moist spots on its surface.
Try a different brand of paper. (See "Print
not clear.
•
Before printing,
the machine
Using damp paper
can cause vapor
This is not a problem. Just
keep printing.
emits vapor near
the output tray.
during printing.
•
•
The paper lot is bad. The manufacturing
processes can cause some areas to reject
toner. Try a different kind or brand of paper.
Change the printer option and try again. Go
to Printing Preferences, click Paper tab,
The machine
does not print
special- sized
paper, such as
billing paper.
Paper size and
paper size setting
do not match.
Set the correct paper size in
the Custom in the Paper tab
in the Printing Preferences.
(See "Paper tab" on
•
If these steps do not correct the problem,
contact a service representative.
Printing quality problems
If the inside of the machine is dirty or paper has been loaded improperly,
there might be a reduction in print quality. See the table below to clear the
problem.
White Spots
If white spots appear on the page:
•
The paper is too rough and a lot of dirt from a
paper falls to the inner devices within the
machine, so the transfer roller may be dirty.
Clean the inside of your machine. (See
CONDITION
SUGGESTED SOLUTIONS
Light or faded print
•
If a vertical white streak or faded area
•
The paper path may need cleaning. (See
appears on the page, the toner supply is low.
You may be able to temporarily extend the
toner cartridge life. (See"Redistributing toner"
on page 101.) If this does not improve the
print quality, install a new toner cartridge.
The paper may not meet paper specifications;
for example, the paper may be too moist or
page 126.)
If the entire page is light, the print resolution
setting is too low or the toner save mode is
on. Adjust the print resolution and turn the
toner save mode off. See the help screen of
the printer driver.
Vertical lines
If black vertical streaks appear on the page:
•
The surface (drum part) of the toner
cartridge inside the machine has probably
been scratched. Remove the toner cartridge
and install a new one. (See "Replacing the
•
•
If white vertical streaks appear on the page:
•
The surface of the LSU part inside the
machine may be dirty. (See "Cleaning the
•
A combination of faded or smeared defects
may indicate that the toner cartridge needs
cleaning. (See "Cleaning the inside" on
Color or Black
background
If the amount of background shading becomes
unacceptable:
•
Change to a lighter weight paper. (See "Print
•
•
The surface of the LSU part inside the
machine may be dirty. (See "Cleaning the
•
Check the environmental conditions: very
dry conditions or a high level of humidity
(higher than 80% RH) can increase the
amount of background shading.
Remove the old toner cartridge and, install a
new one. (See "Replacing the toner
Toner specks
The paper may not meet specifications; for
example, the paper may be too moist or
page 126.)
The transfer roller may be dirty. Clean the
inside of your machine. Contact a service
representative.
•
A aB bC c
A aB bC c
A aB bC c
A aB bC c
A aB bC c
•
•
The paper path may need cleaning. Contact a
service representative.
Troubleshooting_ 111
Download from Www.Somanuals.com. All Manuals Search And Download.
CONDITION
Toner smear
SUGGESTED SOLUTIONS
If toner smears on the page:
CONDITION
Page skew
SUGGESTED SOLUTIONS
•
•
Ensure that the paper is loaded properly.
Check the paper type and quality. (See "Print
Ensure that the guides are not too tight or too
loose against the paper stack.
•
•
•
Clean the inside of the machine. (See
Check the paper type and quality. (See "Print
Remove the toner cartridge and then, install
a new one. (See "Replacing the toner
•
Vertical repetitive
defects
If marks repeatedly appear on the printed side of
the page at even intervals:
Curl or wave
•
•
Ensure that the paper is loaded properly.
Check the paper type and quality. Both high
temperature and humidity can cause paper
curl. (See "Print media specifications" on
Turn the stack of paper over in the tray. Also
try rotating the paper 180° in the tray.
•
The toner cartridge may be damaged. If you
still have the same problem, remove the
toner cartridge and, instll a new one. (See
•
•
•
Parts of the machine may have toner on
them. If the defects occur on the back of the
page, the problem will likely correct itself
after a few more pages.
The fusing assembly may be damaged.
Contact a service representative.
Wrinkles or
creases
•
•
Ensure that the paper is loaded properly.
Check the paper type and quality. (See "Print
Turn the stack of paper over in the tray. Also
try rotating the paper 180° in the tray.
Background
scatter
Background scatter results from bits of toner
randomly distributed on the printed page.
•
•
•
•
The paper may be too damp. Try printing
with a different batch of paper. Do not open
packages of paper until necessary so that
the paper does not absorb too much
moisture.
If background scatter occurs on an envelope,
change the printing layout to avoid printing
over areas that have overlapping seams on
the reverse side. Printing on seams can
cause problems.
A
Back of printouts
are dirty
Check for leaking toner. Clean the inside of the
machine. (See "Cleaning the inside" on
If background scatter covers the entire
surface area of a printed page, adjust the
print resolution through your software
application or in Printing Preferences. (See
Misformed
characters
•
If characters are improperly formed and
producing hollow images, the paper stock
may be too slick. Try different paper. (See
•
If characters are improperly formed and
producing a wavy effect, the scanner unit may
need service. (See "Cleaning the scan unit"
Solid Color or
Black pages
•
The toner cartridge may not be installed
properly. Remove the cartridge and reinsert it.
The toner cartridge may be defective.
Remove the toner cartridge and install a new
•
•
The machine may require repair. Contact a
service representative.
Troubleshooting_ 112
Download from Www.Somanuals.com. All Manuals Search And Download.
Copying problems
CONDITION
Loose toner
SUGGESTED SOLUTIONS
CONDITION
SUGGESTED SOLUTION
•
•
•
Clean the inside of the machine. (See
Check the paper type and quality. (See "Print
Remove the toner cartridge and then, install a
new one. (See "Replacing the toner cartridge"
If the problem persists, the machine may
require repair. Contact a service
representative.
Copies are too light
or too dark
Use Light and Dark arrows to lighten or darken
the backgrounds of copies in the Basic tab of
the Copy menu.
Smears, lines,
•
If the defects are on the original, press Light
and Dark arrows to lighten the background of
your copies in the Basic tab of the Copy
menu.
marks, or spots
appear on copies.
•
•
If there are no defects on the original, clean
the scan unit. (See "Cleaning the scan unit"
Character Voids
Character voids are white areas within parts of
characters that should be solid black:
Copy image is
skewed.
•
•
Ensure that the original is face down on the
scanner glass or face up in the document
feeder.
•
If you are using transparencies, try another
type of transparency. Because of the
composition of transparencies, some
character voids are normal.
Check that the copy paper is loaded correctly.
•
•
You may be printing on the wrong surface of
the paper. Remove the paper and turn it
around.
The paper may not meet paper
specifications. (See "Print media
Blank copies print
out.
Ensure that the original is face down on the
scanner glass or face up in the document
feeder.
A
Image rubs off the
copy easily.
•
Replace the paper in the tray with paper from
a new package.
•
•
In high humidity areas, do not leave paper in
the machine for extended periods of time.
Horizontal stripes
If horizontally aligned black streaks or smears
appear:
•
Frequent copy paper
jams occur.
Fan the stack of paper, then turn it over in the
tray. Replace the paper in the tray with a fresh
supply. Check/adjust the paper guides, if
necessary.
The toner cartridge may be installed
improperly. Remove the cartridge and
reinsert it.
The toner cartridge may be defective.
Remove the toner cartridge and install a new
If the problem persists, the machine may
require repair. Contact a service
representative.
•
•
•
Ensure that the paper is the proper paper
weight.
Check for copy paper or pieces of copy paper
remaining in the machine after a paper jam
has been cleared.
•
Toner cartridge
produces fewer
copies than
expected before
running out of toner.
•
Your originals may contain pictures, solids, or
heavy lines. For example, your originals may
be forms, newsletters, books, or other
documents that use more toner.
Curl
If the printed paper is curled or paper does not
feed into the machine:
•
Turn the stack of paper over in the tray. Also
try rotating the paper 180° in the tray.
Change the printer option and try again. Go
to Printing Preferences, click Paper tab,
•
•
The scanner lid may be left open while copies
are being made.
Turn the machine off and back on.
•
An unknown image Your machine is probably being used at an
repetitively
altitude of 1,500 m (4,921 ft) or above.
The high altitude may affect the print quality,
such as loose toner or light imaging. Change the
correct altitude setting to your machine. (See
appears on a few
sheets or loose
toner, light print, or
contamination
occurs.
Troubleshooting_ 113
Download from Www.Somanuals.com. All Manuals Search And Download.
Scanning problems
Fax problems
CONDITON
SUGGESTED SOLUTIONS
CONDITION
SUGGESTED SOLUTIONS
The scanner does not
work.
•
•
Make sure that you place the original to be
scanned face down on the scanner glass, or
face up in the document feeder.
There may not be enough available memory
to hold the document you want to scan. Try
the Prescan function to see if that works.
Try lowering the scan resolution rate.
Check that the machine cable is connected
properly.
Make sure that the machine cable is not
defective. Switch the cable with a known
good cable. If necessary, replace the cable.
Check that the scanner is configured
correctly. Check scan setting in the
SmarThru Office or the application you want
to use to make certain that the scanner job
is being sent to the correct port (for example,
USB001).
The machine is not
working, there is no
display, or the
buttons are not
working.
•
•
Unplug the power cord and plug it in again.
Ensure that there is power being supplied to
the electrical outlet.
No dial tone.
•
•
Check that the phone line is properly
connected.
Check that the phone socket on the wall is
working by plugging in another phone.
•
•
The numbers stored Make sure that the numbers are stored in
in memory do not
dial correctly.
memory correctly. Print a Fax Phone Book list.
•
The original does
not feed into the
machine.
•
Make sure that the paper is not wrinkled and
you are inserting it in correctly. Check that the
original is the right size, not too thick or thin.
Make sure that the document feeder is firmly
closed.
The document feeder rubber pad may need to
be replaced. Contact a service
representative.
•
•
The unit scans very
slowly.
•
Check if the machine is printing received
data. If so, scan the document after the
received data has been printed.
•
•
Graphics are scanned more slowly than text.
Faxes are not
received
automatically.
•
•
•
The receiving mode should be set to fax.
Make sure that there is paper in the tray.
Check to see if the display shows any error
message. If it does, clear the problem
Communication speed slows in scan mode
because of the large amount of memory
required to analyze and reproduce the
scanned image. Set your computer to the
ECP printer mode through BIOS setting. It
will help to increase the speed. For details
about how to set BIOS, refer to your
computer user’s guide.
The machine does
not send.
•
•
Make sure that the original is loaded in the
document feeder or on the scanner glass.
Check the fax machine you are sending to, to
see if it can receive your fax.
Message appears on
your computer
screen:
•
There may be a copying or printing job in
progress. Try your job again when that job is
finished.
The selected port is currently being used.
Restart your computer and try again.
The machine cable may be improperly
connected or the power may be off.
The scanner driver is not installed or the
The incoming fax
has blank spaces or
is of poor-quality.
•
The fax machine sending you the fax may be
faulty.
A noisy phone line can cause line errors.
Check your machine by making a copy.
The toner cartridge may be empty. Replace
the toner cartridge. (See "Replacing the toner
•
•
•
•
Device can’t be
set to the H/W
mode you want.
•
•
•
•
•
Port is being used
by another
program.
operating environment is not set up properly.
Some of the words
on an incoming fax
are stretched.
The fax machine sending the fax had a
temporary document jam.
•
•
Port is Disabled.
Scanner is busy
receiving or
Ensure that the machine is properly
connected and the power is on, then restart
your computer.
The USB cable may be improperly
connected or the power may be off.
There are lines on
the originals you
sent.
Check your scan unit for marks and clean it.
printing data.
When the current
job is completed.,
try again.
•
•
•
Invalid handle.
Scanning has
failed.
Troubleshooting_ 114
Download from Www.Somanuals.com. All Manuals Search And Download.
CONDITION
SUGGESTED SOLUTIONS
POSSIBLE
CAUSE
PROBLEM
SOLUTION
The machine dials a
number, but the
connection with the
other fax machine
fails.
The other fax machine may be turned off, out of
paper, or cannot answer incoming calls. Speak
with the other machine operator and ask her/him
to solve out the problem.
A PostScript error
page prints.
The print job may
not be PostScript.
Make sure that the print
job is a PostScript job.
Check to see whether
the software application
expected a setup or
PostScript header file to
be sent to the machine.
Faxes do not store in There may not be enough memory space to
memory.
store the fax. If the display indicating the
memory status shows, delete any faxes you no
longer need from the memory, and then try to
store the fax again. Call for service.
The optional tray is
not selected in the
driver.
The printer driver
has not been
configured to
recognize the
optional tray.
Open the PostScript
driver properties, select
the Device Settings tab,
and set the tray option of
the Installable Options
section to Installed.
Blank areas appear
at the bottom of
each page or on
other pages, with a
small strip of text at
the top
You may have chosen the wrong paper settings
in the user option setting. For details about
paper settings. (See "Setting the paper size and
When printing a
document in
The resolution
setting in the printer resolution setting in your
Make sure that the
Macintosh with
Acrobat Reader 6.0
or higher, colors
print incorrectly.
driver may not be
matched with the
one in Acrobat
Reader.
printer driver matches
the one in Acrobat
Reader.
Common PostScript problems
The following situations are PS language specific and may occur when
several printer languages are used.
Common Windows problems
POSSIBLE
CAUSE
PROBLEM
SOLUTION
CONDITION
SUGGESTED SOLUTIONS
PostScript file
cannot be printed.
The PostScript
driver may not be
installed correctly.
•
Install the PostScript
driver. (See "Installing
USB connected
network connected
page 31.)
“File in Use”
message appears
during installation.
Exit all software applications. Remove all
software from the printer’s startup group, then
restart Windows. Reinstall the printer driver.
“General Protection
Fault”, “Exception
OE”, “Spool 32”, or
“Illegal Operation”
messages appear.
Close all other applications, reboot Windows
and try printing again.
•
•
Print a configuration
page and verify that
the PS version is
“Fail To Print”, “A
printer timeout error Just keep waiting until the machine finishes
occurred” messages printing. If the message appears in standby
appear.
These messages may appear during printing.
available for printing.
If the problem persists,
contact a service
representative.
mode or after printing has been completed,
check the connection and/or whether an error
has occurred.
“Limit Check Error”
report prints.
The print job was
too complex.
You might need to
Refer to Microsoft Windows User’s Guide that came with your
computer for further information on Windows error messages.
reduce the complexity of
the page or install more
Troubleshooting_ 115
Download from Www.Somanuals.com. All Manuals Search And Download.
Common Linux problems
CONDITION
SUGGESTED SOLUTIONS
CONDITION
SUGGESTED SOLUTIONS
Some color images
come out all black.
This is a known bug in Ghostscript (until GNU
Ghostscript version 7.05) when the base color
space of the document is indexed color space
and is converted through CIE color space.
Because Postscript uses CIE color space for
Color Matching System, you should upgrade
Ghostscript on your system to at least GNU
Ghostscript version 7.06 or later. You can find
recent Ghostscript versions at
The machine does
not print.
•
Check if the printer driver is installed in your
system. Open Unified Driver Configurator and
switch to the Printers tab in Printers
configuration window to look at the list of
available machines. Make sure that your
machine is displayed on the list. If not, open
Add new printer wizard to set up your
device.
Check if the machine is started. Open
Printers configuration and select your
machine on the printers list. Look at the
description in the Selected printer pane. If its
status contains Stopped string, press the
Start button. After that normal operation of
the machine should be restored. The
“stopped” status might be activated when
some problems in printing occurred. For
instance, this could be an attempt to print a
document when the port is claimed by a
scanning application.
Ensure the port is not busy. Since functional
components of machine (printer and scanner)
share the same I/O interface (port), the
situation of simultaneous access of different
“consumer” applications to the same port is
possible. To avoid possible conflicts, only one
of them at a time is allowed to gain control
over the device. The other “consumer” will
encounter “device busy” response. You
should open ports configuration and select
the port assigned to your machine. In the
Selected port pane you can see if the port is
occupied by some other application. If this is
the case, you should either wait for
completion of the current job or press the
Release port button, if you are sure that the
present application is not functioning properly.
Check if your application has special print
option such as “-oraw”. If “-oraw” is specified
in the command line parameter, then remove
it to print properly. For Gimp front-end, select
“print” -> “Setup printer” and edit command
line parameter in the command item.
The CUPS (Common Unix Printing System)
version distributed with SuSE Linux 9.2
(cups-1.1.21) has a problem with ipp (Internet
Printing Protocol) printing.Use the socket
printing instead of ipp or install a later version
of CUPS (cups-1.1.22 or higher).
www.ghostscript.com.
•
Some color images
come out in
unexpected colors.
This is a known bug in Ghostscript (until GNU
Ghostscript version 7.xx) when the base color
space of the document is indexed RGB color
space and it is converted through CIE color
space. Because Postscript uses CIE color space
for Color Matching System, you should upgrade
Ghostscript on your system to at least GNU
Ghostscript version 8.xx or later. You can find
recent Ghostscript versions at
www.ghostscript.com.
The machine does
not print whole
pages, and output is Ghostscript, 64-bit Linux OS, and has been
printed on half the
page.
It is a known problem that occurs when a color
machine is used on version 8.51 or earlier of
•
reported to bugs.ghostscript.com as Ghostscript
Bug 688252.The problem is solved in AFPL
Ghostscript v. 8.52 or above. Download the
latest version of AFPL Ghostscript from
http://sourceforge.net/projects/ghostscript/ and
install it to solve this problem.
I cannot scan via
Gimp Front-end.
Check if Gimp Front-end has Xsane:Device
dialog. on the Acquire menu. If not, you should
install Xsane plug-in for Gimp on the your
computer. You can find Xsane plug-in package
for Gimp on Linux distribution CD or Gimp home
page. For the detailed information, refer to the
Help for Linux distribution CD or Gimp Front-end
application.
If you wish to use another kind of scan
application, refer to application’s Help.
•
•
I encounter error
“Cannot open port
device file” when
printing a document. job whenever print options are changed and
then try to restart the job from the beginning.
Since Unified Linux Driver locks the port while
printing, the abrupt termination of the driver
keeps the port locked and unavailable for
Avoid changing print job parameters (via LPR
GUI, for example) while a print job is in progress.
Known versions of CUPS server break the print
subsequent print jobs. If this situation occurs, try
to release the port by selecting Release port in
Port configuration window.
Troubleshooting_ 116
Download from Www.Somanuals.com. All Manuals Search And Download.
Common Macintosh problems
CONDITION
SUGGESTED SOLUTIONS
CONDITION
SUGGESTED SOLUTIONS
The machine does
not appear on the
scanners list.
•
•
Ensure your machine is attached to your
computer, connected properly via the USB
port, and is turned on.
Ensure the scanner driver for your machine is
installed in your system. Open Unified Linux
Driver configurator, switch to Scanners
configuration, then press Drivers. Make
sure that driver with a name corresponding to
your machine's name is listed in the window.
The machine does
not print PDF files
correctly. Some
parts of graphics,
text, or illustrations
are missing.
Printing the PDF file as an image may enable
the file to print. Turn on Print As Image from the
Acrobat printing options.
It will take longer to print when you print a
PDF file as an image.
The document has
Update your MAC OS to OS MAC OS X 10.3.3.
printed, but the print or higher.
job has not
disappeared from
the spooler in Mac
OS X10.3.2.
•
Ensure the port is not busy. Since functional
components of machine (printer and scanner)
share the same I/O interface (port), the
situation of simultaneous access of different
“consumer” applications to the same port is
possible. To avoid possible conflicts, only one
of them at a time is allowed to gain control
over the device. The other “consumer” will
encounter “device busy” response. This
usually happens when starting a scan
procedure. An appropriate message box
appears.
To identify the source of the problem, open
the Ports configuration and select the port
assigned to your scanner, port's symbol
/dev/mfp0 corresponds to LP:0 designation
displayed in the scanners’ options, /dev/mfp1
relates to LP:1, and so on. USB ports start at
/dev/mfp4, so scanner on USB:0 relates to
/dev/mfp4 respectively and so forth
Some letters are not Mac OS cannot create the font during the cover
displayed normally
during the cover
page printing.
page printing. The English alphabet and
numbers are displayed normally on the cover
page.
When printing a
document in
Macintosh with
Acrobat Reader 6.0
or higher, colors
print incorrectly.
Make sure that the resolution setting in your
machine driver matches the one in Acrobat
Reader.
Refer to Macintosh User’s Guide that came with your computer for
further information on Macintosh error messages.
sequentially. In the Selected port pane, you
can see if the port is occupied by another
application. If this is the case, you should
either wait for completion of the current job or
press the Release port button, if you are sure
that the present port applicaton is not
functioning properly.
The machine does
not scan.
•
•
Ensure a document is loaded into the
machine, ensure your machine is connected
to the computer.
If there is an I/O error while scanning.
Refer to Linux User’s Guide that came with your computer for further
information on Linux error messages.
Troubleshooting_ 117
Download from Www.Somanuals.com. All Manuals Search And Download.
21.
supplies and accessories
This chapter provides information on purchasing supplies, accessories and maintenance parts available for your machine.
This chapter includes:
•
•
•
•
•
•
•
•
•
Available accessories may differ from country to country. Contact your
sales representatives to obtain the list of available accessories.
AVAILABLE ACCESSORIES
You can purchase and install accessories to enhance your machine’s
performance and capacity.
HOW TO PURCHASE
ACCESSORY
FUNCTION
Extend your
machine’s memory
capacity.
PART NAME
To order Samsung-authorized supplies, accessories and, maintenance
parts, contact your local Samsung dealer or the retailer where you
select your country/region, and obtain information on calling for service.
Memory module
CLP-MEM202: 256 MB
Optional tray 2
If you are
experiencing
SCX-S5835A
AVAILABLE SUPPLIES
frequent paper
supply problems,
you can attach an
additional 500 sheet
tray. You can print
documents in
When supplies reach their lifespan, you can order the following types of
supplies for your machine:
AVERAGE YIELDA
TYPE
PART NAME
various sizes and
types of print
materials.
Standard yield
Approx. 4,000 pages
•
•
MLT-D208S
Region Ab:
MLT-D2082S
Region Bc:
MLT-D206S
SmarThru
Workflow
Windows
SOL-STWFV2
•
2000/XP/2003. This
feature lets you send
additional
information along
with the scanned
document to a
specified network
location.
High yield
Approx. 10,000 pages
•
•
MLT-D208L
MLT-D2082L
•
MLT-D206L
a.Declared yield value in accordance with ISO/IEC 19752.
b.Region A: Albania, Austria, Belgium, Bosnia, Bulgaria, Croatia, Cyprus,
Czech Republic, Denmark, Finland, France, Germany, Greece,
Hungary, Italy, Macedonia, Netherlands, Norway, Poland, Portugal,
Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, UK.
AVAILABLE MAINTENANCE PARTS
To avoid print quality and paper feed problems resulting from worn parts
and to maintain your machine in top working condition, the following parts
will need to be replaced after printing the specified number of pages or
when the life span of each item has expired.
c. Region B (only SCX-5935NX): U.S.A, Canada
To replace a toner cartridge: (See "Replacing the toner cartridge" on
Depending on the options and job mode used, the toner cartridge’s
lifespan may differ.
You must purchase supplies, including toner cartridges, in the same
country where you purchased your machine. Otherwise, supplies will
be incompatable with your machine since the system configuration of
these vary from country to country.
Supplies and accessories_ 118
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Slowly shake the cartridge five or six times to distribute the toner evenly
AVERAGE YIELDA
inside the cartridge. It will assure maximum copies per cartridge.
PARTS
PART NAME
RMO ADF
Document feeder
rubber pad
Approx. 50,000 pages
RUBBER
Transfer roller
Approx. 100,000 pages
ROLLER-TRANSF
ER
Fuser unit
Approx. 100,000 pages
Approx. 100,000 pages
ELA UNIT-FUSER
Tray rubber pad
RPR-PAD
CASSETTE
Pickup roller
Approx. 150,000 pages
ROLLER-PICK UP
If toner gets on your clothing, wipe it off with a dry cloth and wash
clothing in cold water. Hot water sets toner into fabric.
a.It will be affected by operating system used, computing performance,
application software, connecting method, media type, media size and
job complexity.
Do not touch the green underside of the toner cartridge. Use the
handle on the cartridge to avoid touching this area.
To purchase maintenance parts, contact the source where you bought the
machine.
5. Hold the toner cartridge by the handle and slowly insert the cartridge into
the opening in the machine.
Replacing maintenance parts can be performed only by an authorized
service provider, dealer, or the retailer where you bought the machine. The
warranty does not cover the replacement of any maintenance parts after
their lifespan.
Tabs on the sides of the cartridge and corresponding grooves within the
machine will guide the cartridge into the correct position until it locks into
place completely.
REPLACING THE TONER CARTRIDGE
When the toner cartridge is completely empty:
•
•
End of life, Replace with new toner cartridge appears on the display.
The machine stops printing. Incoming faxes are saved in memory.
At this stage, the toner cartridge needs to be replaced. Check the type of the
1. Open the front cover.
2. Pull the toner cartridge out.
6. Close the front cover. Make sure that the cover is securely closed.
NECESSARY PRECAUTIONS TO TAKE WHEN
INSTALLING ACCESSORIES
•
Disconnect the power cord.
Never remove the control board cover while the power is turned on.
To avoid the possibility of an electrical shock, always disconnect the
power cord when installing or removing ANY internal or external
accessories.
•
Discharge static electricity.
The control board and internal accessories (network interface card or
memory module) are sensitive to static electricity. Before installing or
removing any internal accessories, discharge static electricity from your
body by touching something metal, such as the metal back plate on any
device plugged into a grounded power source. If you walk around before
finishing the installation, repeat this procedure to discharge any static
electricity again.
3. Remove the new toner cartridge from its bag.
•
Activating the added accessories in the PS driver properties.
After installing an accessory such as an optional tray, PS driver users
must do the additional setting. Go to the PS printer properties and set
the added accesorry activated.
Supplies and accessories_ 119
Download from Www.Somanuals.com. All Manuals Search And Download.
6. Close the control board cover by aligning the groove on it with the notch
When installing accessories, the battery inside the machine is a
service component. Do not change it by yourself.
on the machine and sliding it.
There is a risk of an explosion if battery is replaced by an incorrect
type. Dispose used batteries according to the instructions.
UPGRADING A MEMORY MODULE
Your machine has a dual in-line memory module (DIMM). Use this memory
module slot to install additional memory.
The machine has two memory slots with a factory pre-installed memory
module in one slot. When you are expanding the memory capacity, you can
add a memory module to the vacant memory slot. It is strongly
recommended that you expand a memory module in the vacant memory
slot, and not by removing a pre-installed memory module. If your machine
has 256 MB memory capacity and you want to add 256 MB, the memory
capacity expands up to 512 MB. Order information is provided for additional
memory module. (See "Available accessories" on page 118.)
7. Reconnect the power cord and machine cable. Turn on the machine.
If you use the PS driver, you must activate the added memory in the
PS driver properties.
Installing a memory module
1. Turn the machine off and unplug all cables from the machine.
2. Grasp the control board cover and remove it.
Activating the added accessories in PS printer
properties
After installing the memory module, you need to select it in the printer
properties of the PostScript printer driver in order to use it.
page 31.)
2. Click the Windows Start menu.
•
•
•
For Windows 2000, select Settings > Printers.
For Windows XP/2003, select Printers and Faxes.
For Windows Vista, select Control Panel > Hardware and Sound >
Printers.
3. Select the your machine’s PS driver and right-click to open Properties.
4. Select Device Settings.
5. Select the Installable Options section and set the necessary options.
6. Click OK.
3. Remove the new memory module from its bag.
4. Holding the memory module by the edges, align the memory module on
the slot at about a 30-degree tilt. Make sure that the notches of the
module and the grooves on the slot fit each other.
CHECKING REPLACEABLE’S LIFESPAN
If you experience frequent paper jams or printing problems, check the
number of pages the machine has printed. Replace the corresponding
parts, if necessary.
1. Press Machine Setup on the control panel.
2. Press Machine Status > the Supplies Life tab.
REPLACING THE DOCUMENT FEEDER RUBBER
PAD
The notches and grooves illustrated above may not match those
on an actual memory module and its slot.
5. Press the memory module into the slot with care until you hear a 'click'.
You will need to replace the document feeder rubber pad when there seems
to be a consistent problem with paper pickup or when its specified yield is
reached.
Do not press the memory module strongly or the module may be
damaged. If the module does not seem to fit into the slot properly,
carefully try the previous procedure again.
1. Open the document feeder cover.
2. Remove the document feeder rubber pad from the document feeder, as
shown below.
Supplies and accessories_ 120
Download from Www.Somanuals.com. All Manuals Search And Download.
1 Document
feeder rubber
pad
3. Insert a new document feeder rubber pad into place.
4. Close the document feeder cover.
Supplies and accessories_ 121
Download from Www.Somanuals.com. All Manuals Search And Download.
22.
specifications
This chapter guides you about this machine’s specifications such as various features.
This chapter include:
•
•
•
•
•
•
GENERAL SPECIFICATIONS
The symbol * optional feature depending on machines.
ITEM
DESCRIPTION
Document feedera Capacity
Document feeder document size
Paper input capacity
Up to 50 sheets 80 g/m2 (20 lb bond)
Width: 142 to 216 mm (5.6 x 8.5 inches)/ Length: 148 to 356 mm (5.8 x 14 inches)
•
•
•
Tray: 500 sheets for plain paper, 80 g/m2 (20 lb bond)
Multi-purpose tray: 50 sheets for plain paper, 80 g/m2 (20 lb bond)
Optional tray: 500 sheets for plain paper, 80 g/m2 (20 lb bond)
Face down: 250 sheets 80 g/m2 (20 lb bond)
Paper output capacity
Power rating
AC 110 - 127 V or AC 220 - 240 V
See the Rating label on the machine for the correct voltage, frequency (hertz) and type of current for your machine.
Power consumption
•
•
•
•
Average operating mode: Less than 750 W
Ready mode: Less than 100 W
Power Save mode: Less than 25 W
Power off mode: 0 W
Noise Levelb
•
•
•
Ready mode: 39 dB(A)
Printing mode: 52 dB(A)
Copying mode: 54 dB(A)
Default time to power save mode
from ready mode
30 Minutes
Boot-up timec
Less than 50 seconds
The boot-up time will be longer, if data volume is a lot in the HDD
Operating environment
Temperature: 10 to 32 °C (50 to 89.6 °F)
Humidity: 20 to 80% RH
Display
WVGA (800 x 480 x RGV) color
Toner cartridge lifed
Standard yield
Average Cartridge Yield 4,000 standard pages.
Declared yield value in accordance with ISO/IEC
(Shipped with 4,000 pages Starter toner cartridge.)e
High yield
Average Cartridge Yield 10,000 standard pages.
Declared yield value in accordance with ISO/IEC
Memory (Expandable)*
256 MB (Max. 512 MB)
Specifications_ 122
Download from Www.Somanuals.com. All Manuals Search And Download.
ITEM
External dimension
DESCRIPTION
500 x 465 x 547 mm
(W x D x H)
(19.7 x 18.3 x 21.5 inches) without optional tray
Weight
23.1 Kg (50.88 lbs)
(Including consumables)
Package weight
Paper: 2.9 Kg (6.29 lbs)
Plastic: 1.9 Kg (4.17 lbs)
Duty cycle
Up to 80,000 pages (Monthly)
180 °C (356 °F)
Fusing temperature
a.Document feeder is synonymous with DADF.
b.Sound Pressure Level, ISO 7779. Configuration tested: machine basic installation, A4 paper, simplex printing.
c. Boot-up time is the time that takes from the power switch on to the ready mode.
d.Declared yield value in accordance with ISO/IEC 19752. The number of pages may be affected by operating environment, printing interval, media type, and
media size.
e.It varies depending on the product configuration.
PRINTER SPECIFICATIONS
ITEM
DESCRIPTION
Printing method
Printing speeda
Laser beam printing
Up to 33 ppm (A4), 35 ppm (Letter)
Duplex printing speed
First print out time
Print resolution
Up to 17 ipm (A4), 18 ipm (Letter)
8.5 seconds (from ready)
Up to 1,200 x 1,200 dpi effective output
Printer language
PCL5e, PCL6, PostScript 3, PDF1.4, TIFF, Epson/ IBM Pro (Israel only)
OS compatibilityb
•
•
•
Windows: 2000/XP/2003/Vista/2008
Various Linux OS ( See "Linux" on page 26.)
Macintosh: Mac OS X 10.3~10.5
Interface
•
•
High speed USB 2.0
Ethernet 10/100 Base TX (Embedded type)
a.It will be affected by operating system used, computing performance, application software, connecting method, media type, media size and job complexity.
Specifications_ 123
Download from Www.Somanuals.com. All Manuals Search And Download.
SCANNER SPECIFICATIONS
ITEM
DESCRIPTION
Compatibility
TWAIN standard/WIA standard
Color CCD
Scanning method
Resolutiona
TWAIN standard
WIA standard
Scan to USB
Up to 600 x 600 dpi (Up to 4,800 x 4,800 dpi by software enhancement)
Up to 600 x 600 dpi
100, 200, 300 dpi
Scan to Email
Scan to Server
100, 200, 300, 400, 600 dpi
PDF, TIFF, JPEGb
Network Scan File format
Effective scanning length
Scanner glass: 289 mm (11.38 inches)
Document feeder: 348 mm (13.7 inches)
Effective scanning width
Color bit depth
Max. 208 mm (8.2 inches)
Internal: 36 bit
External: 24 bit
Mono bit depth
1 bit for lineart & halftone
8 bit for gray scale
a.Due to the applications for scanning, the maximum resolution might differ.
b.JPEG is not available when you select the mono mode in scan color.
COPIER SPECIFICATIONS
ITEM
DESCRIPTION
Copy Speeda
Up to 33 cpm (A4), 35 cpm (Letter)
Duplex copy speed
First copy out time
Copy resolution
Simplex to Duplex (1-2): Up to 17 ipm in A4 (18 ipm in Letter)
Duplex to Duplex (2-2): Up to 13 ipm in A4 (14 ipm in Letter)
Scanner glass: 9.5 seconds (from ready)
Document feeder: 11.5 seconds (from ready)
Text
Scanner glass: Up to 600 x 600 dpi
Document feeder: Up to 300 x 300 dpi
Text/photo
Photo
Scanner glass: Up to 600 x 600 dpi
Document feeder: Up to 300 x 300 dpi
Scanner glass: Up to 600 x 600 dpi
Document feeder: Up to 300 x 300 dpi
Zoom range
Scanner glass: 25% to 400%
Document feeder: 25% to 200%
a.Copy speed is based on Single Document Multiple Copy.
Specifications_ 124
Download from Www.Somanuals.com. All Manuals Search And Download.
FACSIMILE SPECIFICATIONS
The fax feature may not be supported depending on machines.
ITEM
DESCRIPTION
Compatibility
ITU-T G3
Applicable line
Data coding
Public Switched Telephone Network (PSTN) or behind PABX
MH/MR/MMR/JBIG/JPEG (Tx only)
33.6 Kbps
Modem speed
Transmission speed
Up to 3 seconds/pagea
356 mm (14 inches)
Maximum document length
Resolution
•
Standard: 203 x 98 dpi
•
•
Fine: 203 x 196 dpi
Super Fine: 300 x 300 dpi (Rxb only)
Memory
HDD Backup (Receive: 2,000 pages, Send: 500 pages)
Halftone
Auto dialer
256 levels
up to 200 numbers
a.Standard resolution, MMR(JBIG), Maximum modem speed, Phase “C” by ITU-T No. 1 chart, Memory Tx, ECM.
b.Rx stands for receiving a fax.
Specifications_ 125
Download from Www.Somanuals.com. All Manuals Search And Download.
PRINT MEDIA SPECIFICATIONS
PRINT MEDIA WEIGHTA/CAPACITYB
TYPE
SIZE
DIMENSIONS
TRAY1 / OPTIONAL TRAY
75 to 90 g/m2 (20 to 24 lb bond)
MULTIPURPOSE TRAY
60 to 163 g/m2 (16 to 43 lb bond)
Plain paper
Letter
Legal
US Folio
A4
216 x 279 mm (8.5 x 11 inches)
216 x 356 mm (8.5 x 14 inches)
216 x 330 mm (8.5 x 13 inches)
210 x 297 mm (8.26 x 11.69 inches)
216 x 343 mm (8.5 x 13.5 inches)
182 x 257 mm (7.16 x 10.11 inches)
176 x 250 mm (6.93 x 9.84 inches)
184 x 267 mm (7.25 x 10.5 inches)
148 x 210 mm (5.82 x 8.26 inches)
140 x 216 mm (5.5 x 8.5 inches)
105 x 148 mm (4.13 x 5.82 inches)
98 x 191 mm (3.87 x 7.5 inches)
105 x 241 mm (4.12 x 9.5 inches)
110 x 220 mm (4.33 x 8.66 inches)
162 x 229 mm (6.37 x 9.01 inches)
114 x 162 mm (4.48 x 6.38 inches)
Refer to the Plain paper section
•
500 sheets of 80g/m2 (20 lb
bond)
•
50 sheets of 80 g/m2 (20 lb bond)
Oficio
JIS B5
ISO B5
75 to 90 g/m2 (20 to 24 lb bond)
•
250 sheets of 80 g/m2(20 lb
bond)
Executive
A5
Statement
A6
Not available in tray1 / optional
trays.
75 to 90 g/m2 (20 to 24 lb bond)
5 sheets stacking
Envelope
Envelope Monarch
Envelope No. 10
Envelope DL
Envelope C5
Envelope C6
Not available in tray1 / optional
trays.
•
90 to 105 g/m2 (24 to 28 lb bond)
90 to 105 g/m2 (24 to 28 lb bond)
• 20 sheets stacking
Thick paper
Thin paper
Refer to the Plain
paper section
•
350 sheets stacking
60 to 70 g/m2 (16 to 19 lb bond)
500 sheets stacking
60 to 70 g/m2 (16 to 19 lb bond)
• 50 sheets stacking
Refer to the Plain
paper section
Refer to the Plain paper section
Refer to the Plain paper section
•
138 to 146 g/m2 (36.81 to 38.91 lb
bond)
Transparency
Refer to the Plain
paper section
Not available in tray1 / optional
trays.
•
5 sheets stacking
120 to 150 g/m2 (32 to 40 lb bond)
5 sheets stacking
Labelsc
Letter, Legal, US
Folio, A4, JIS B5, ISO
B5, Executive, A5,
Statement
Refer to the Plain paper section
Refer to the Plain paper section
Not available in tray1 / optional
trays.
•
105 to 163 g/m2 ( 28 to 43lb bond)
5 sheets stacking
Card stock
Letter, Legal, US
Folio, A4, JIS B5, ISO
B5, Executive, A5,
Statement, PostCard
4 x 6
Not available in tray1 / optional
trays.
•
60 to 163 g/m2 (16 to 43 lb bond)
Minimum size (custom)
Maximum size (custom)
76.2 x 127 mm (3 x 5 inches)
216 x 356 mm (8.5 x 14 inches)
a.If media weight is over 105 g/m2 (28 lb bond), load a paper into the tray one by one.
b.Maximum capacity may differ depending on media weight, thickness, and environmental conditions.
c. Smoothness: 100 to 250 (sheffield)
Specifications_ 126
Download from Www.Somanuals.com. All Manuals Search And Download.
contact samsung worldwide
If you have any comments or questions regarding Samsung products, contact the Samsung customer care center.
COUNTRY/REG
ION
CUSTOMER CARE
CENTER
COUNTRY/REG
ION
CUSTOMER CARE
CENTER
WEB SITE
WEB SITE
GERMANY
01805 - SAMSUNG
(726-7864 € 0,14/min)
ARGENTINE
ARMENIA
0800-333-3733
0-800-05-555
1300 362 603
GEORGIA
8-800-555-555
1-800-299-0013
800-7919267
AUSTRALIA
AUSTRIA
GUATEMALA
HONDURAS
HONG KONG
€ 0.07/min)
(852) 3698-4698
AZERBAIJAN
BAHRAIN
088-55-55-555
8000-4726
HUNGARY
INDIA
06-80-SAMSUNG
(726-7864)
BELARUS
810-800-500-55-500
3030 8282
BELGIUM
02-201-24-18
www.samsung.com/be
www.samsung.com/be_fr
1800 110011
1800 3000 8282
1800 266 8282
INDONESIA
0800-112-8888
021-5699-7777
BRAZIL
0800-124-421
4004-0000
ITALIA
CANADA
1-800-SAMSUNG
(726-7864)
JAMAICA
JAPAN
1-800-234-7267
0120-327-527
800-22273
CHILE
CHINA
JORDAN
KSA
400-810-5858
010-6475 1880
9200-21230
8000-4726
COLOMBIA
01-8000112112
0-800-507-7267
BAHRAIN
LATVIA
COSTA RICA
8000-7267
CZECH
REPUBLIC
800-SAMSUNG
(800-726786)
LITHUANIA
LUXEMBURG
MALAYSIA
MEXICO
8-800-77777
261 03 710
Samsung Zrt., česká organizační složka, Oasis Florenc,
Sokolovská394/17, 180 00, Praha 8
1800-88-9999
01-800-SAMSUNG
(726-7864)
DENMARK
ECUADOR
EGYPT
70 70 19 70
1-800-10-7267
0800-726786
0818 717100
800-6225
MOLDOVA
00-800-500-55-500
EIRE
NETHERLANDS 0900-SAMSUNG
(0900-7267864) (€
EL SALVADOR
ESTONIA
0,10/min)
800-7267
NEW ZEALAND
786)
KAZAKHSTAN
KYRGYZSTAN
FINLAND
8-10-800-500-55-500
00-800-500-55-500
030-6227 515
01 48 63 00 00
NICARAGUA
NORWAY
00-1800-5077267
815-56 480
FRANCE
PANAMA
800-7267
Contact SAMSUNG worldwide_ 127
Download from Www.Somanuals.com. All Manuals Search And Download.
COUNTRY/REG
ION
CUSTOMER CARE
CENTER
COUNTRY/REG
ION
CUSTOMER CARE
CENTER
WEB SITE
WEB SITE
PHILIPPINES
1800-10-SAMSUNG
(726-7864)
1-800-3-SAMSUNG
(726-7864)
UZBEKISTAN
VENEZUELA
VIETNAM
8-10-800-500-55-500
0-800-100-5303
1 800 588 889
1-800-8-SAMSUNG
(726-7864)
02-5805777
POLAND
0 801 1SAMSUNG
(172678)
022-607-93-33
PORTUGAL
80820-SAMSUNG
(726-7864)
PUERTO RICO
QATAR
1-800-682-3180
800-2255
REP. DOMINICA 1-800-751-2676
RUSSIA
8-800-555-55-55
SINGAPORE
1800-SAMSUNG
(726-7864)
SLOVAKIA
0800-SAMSUNG
(726-7864)
SOUTH AFRICA 0860 SAMSUNG
(726-7864)
SPAIN
902-1-SAMSUNG(902 172
678)
SWEDEN
0771 726 7864
(SAMSUNG)
SWITZERLAND
CHF 0.08/min)
SYRIA
1825-22-73
TADJIKISTAN
TAIWAN
8-10-800-500-55-500
0800-329-999
THAILAND
1800-29-3232
02-689-3232
TRINIDAD &
TOBAGO
1-800-SAMSUNG
(726-7864)
TURKEY
U.A.E
U.K
444 77 11
0845 SAMSUNG
(726-7864)
U.S.A
1-800-SAMSUNG
(726-7864)
UKRAINE
8-800-502-000
Contact SAMSUNG worldwide_ 128
Download from Www.Somanuals.com. All Manuals Search And Download.
glossary
The following glossary helps you get familiar with the product by
understanding the terminologies commonly used with printing as well
as mentioned in this user’s guide.
CCD
Charge Coupled Device (CCD) is a hardware which enables the scan
job. CCD Locking mechanism is also used to hold the CCD module to
prevent any damage when you move the machine.
802.11
802.11 is a set of standards for wireless local area network (WLAN)
communication, developed by the IEEE LAN/MAN Standards
Committee (IEEE 802).
Collation
Collation is a process of printing a multiple-copy job in sets. When
collation is selected, the device prints an entire set before printing
additional copies.
802.11b/g
802.11b/g can share same hardware and use the 2.4 GHz band.
802.11b supports bandwidth up to 11 Mbps; 802.11g up to 54 Mbps.
802.11b/g devices may occasionally suffer interference from microwave
ovens, cordless telephones, and Bluetooth devices.
Control Panel
A control panel is a flat, typically vertical, area where control or
monitoring instruments are displayed. They are typically found in front of
the machine.
Access point
Coverage
Access Point or Wireless Access Point (AP or WAP) is a device that
connects wireless communication devices together on wireless local
area networks (WLAN), and acts as a central transmitter and receiver of
WLAN radio signals.
It is the printing term used for a toner usage measurement on printing.
For example, 5% coverage means that an A4 sided paper has about 5%
image or text on it. So, if the paper or original has complicated images or
lots of text on it, the coverage will be higher and at the same time, a
toner usage will be as much as the coverage.
ADF
An Automatic Document Feeder (ADF) is a mechanism that will
automatically feed an original sheet of paper so that the machine can
scan some amount of the paper at once.
CSV
Comma Separated Values (CSV). A type of file format, CSV is used to
exchange data between disparate applications. The file format, as it is
used in Microsoft Excel, has become a pseudo standard throughout the
industry, even among non-Microsoft platforms.
AppleTalk
AppleTalk is a proprietary suite of protocols developed by Apple, Inc for
computer networking. It was included in the original Macintosh (1984)
and is now deprecated by Apple in favor of TCP/IP networking.
DADF
A Duplex Automatic Document Feeder (DADF) is a mechanism that will
automatically feed and flip over an original sheet of paper so that the
machine can scan on both sides of the paper.
BIT Depth
A computer graphics term describing the number of bits used to
represent the color of a single pixel in a bitmapped image. Higher color
depth gives a broader range of distinct colors. As the number of bits
increases, the number of possible colors becomes impractically large for
a color map. 1-bit color is commonly called as monochrome or black and
white.
Default
The value or setting that is in effect when taking a printer out of its box
state, reset, or initialized.
DHCP
A Dynamic Host Configuration Protocol (DHCP) is a client-server
networking protocol. A DHCP server provides configuration parameters
specific to the DHCP client host requesting, generally, information
required by the client host to participate on an IP network. DHCP also
provides a mechanism for allocation of IP addresses to client hosts.
BMP
A bitmapped graphics format used internally by the Microsoft Windows
graphics subsystem (GDI), and used commonly as a simple graphics file
format on that platform.
BOOTP
DIMM
Bootstrap Protocol. A network protocol used by a network client to
obtain its IP address automatically. This is usually done in the bootstrap
process of computers or operating systems running on them. The
BOOTP servers assign the IP address from a pool of addresses to each
client. BOOTP enables 'diskless workstation' computers to obtain an IP
address prior to loading any advanced operating system.
Dual Inline Memory Module (DIMM), a small circuit board that holds
memory. DIMM stores all the data within the machine like printing data,
received fax data.
Glossary_ 129
Download from Www.Somanuals.com. All Manuals Search And Download.
DNS
EtherTalk
The Domain Name Server (DNS) is a system that stores information
associated with domain names in a distributed database on networks,
such as the Internet.
A suite of protocols developed by Apple Computer for computer
networking. It was included in the original Macintosh (1984) and is now
deprecated by Apple in favor of TCP/IP networking.
Dot Matrix Printer
FDI
A dot matrix printer refers to a type of computer printer with a print head
that runs back and forth on the page and prints by impact, striking an
ink-soaked cloth ribbon against the paper, much like a typewriter.
Foreign Device Interface (FDI) is a card installed inside the machine to
allow a third party device such as a coin operated device or a card
reader. Those devices allow the pay-for-print service on your machine.
DPI
FTP
Dots Per Inch (DPI) is a measurement of resolution that is used for
scanning and printing. Generally, higher DPI results in a higher
resolution, more visible detail in the image, and a larger file size.
A File Transfer Protocol (FTP) is a commonly used protocol for
exchanging files over any network that supports the TCP/IP protocol
(such as the Internet or an intranet).
DRPD
Fuser Unit
Distinctive Ring Pattern Detection. Distinctive Ring is a telephone
company service which enables a user to use a single telephone line to
answer several different telephone numbers.
The part of a laser printer that melts the toner onto the print media. It
consists of a hot roller and a back-up roller. After toner is transferred
onto the paper, the fuser unit applies heat and pressure to ensure that
the toner stays on the paper permanently, which is why paper is warm
when it comes out of a laser printer.
Duplex
A mechanism that will automatically flip over a sheet of paper so that the
machine can print (or scan) on both sides of the paper. A printer
equipped with a Duplex can print double-sided of paper.
Gateway
A connection between computer networks, or between a computer
network and a telephone line. It is very popular, as it is a computer or a
network that allows access to another computer or network.
Duty Cycle
Duty cycle is the page quantity which does not affect printer
performance for a month. Generally the printer has the lifespan limitation
such as pages per year. The lifespan means the average capacity of
print-outs, usually within the warranty period. For example, if the duty
cycle is 48,000 pages per month assuming 20 working days, a printer
limits 2,400 pages a day.
Grayscale
A shades of gray that represent light and dark portions of an image
when color images are converted to grayscale; colors are represented
by various shades of gray.
Halftone
ECM
An image type that simulates grayscale by varying the number of dots.
Highly colored areas consist of a large number of dots, while lighter
areas consist of a smaller number of dots.
Error Correction Mode (ECM) is an optional transmission mode built into
Class 1 fax machines or fax modems. It automatically detects and
corrects errors in the fax transmission process that are sometimes
caused by telephone line noise.
HDD
Hard Disk Drive (HDD), commonly referred to as a hard drive or hard
disk, is a non-volatile storage device which stores digitally-encoded data
on rapidly rotating platters with magnetic surfaces.
Emulation
Emulation is a technique of one machine obtaining the same results as
another.
An emulator duplicates the functions of one system with a different
system, so that the second system behaves like the first system.
Emulation focuses on exact reproduction of external behavior, which is
in contrast to simulation, which concerns an abstract model of the
system being simulated, often considering its internal state.
IEEE
The Institute of Electrical and Electronics Engineers (IEEE) is an
international non-profit, professional organization for the advancement
of technology related to electricity.
IEEE 1284
Ethernet
The 1284 parallel port standard was developed by the Institute of
Electrical and Electronics Engineers (IEEE). The term "1284-B" refers to
a specific connector type on the end of the parallel cable that attaches to
the peripheral (for example, a printer).
Ethernet is a frame-based computer networking technology for local
area networks (LANs). It defines wiring and signaling for the physical
layer, and frame formats and protocols for the media access control
(MAC)/data link layer of the OSI model. Ethernet is mostly standardized
as IEEE 802.3. It has become the most widespread LAN technology in
use during the 1990s to the present.
Glossary_ 130
Download from Www.Somanuals.com. All Manuals Search And Download.
compression of binary images, particularly for faxes, but can also be
used on other images.
Intranet
A private network that uses Internet Protocols, network connectivity, and
possibly the public telecommunication system to securely share part of
an organization's information or operations with its employees.
Sometimes the term refers only to the most visible service, the internal
website.
JPEG
Joint Photographic Experts Group (JPEG) is a most commonly used
standard method of lossy compression for photographic images. It is the
format used for storing and transmitting photographs on the World Wide
Web.
IP address
An Internet Protocol (IP) address is a unique number that devices use in
order to identify and communicate with each other on a network utilizing
the Internet Protocol standard.
LDAP
The Lightweight Directory Access Protocol (LDAP) is a networking
protocol for querying and modifying directory services running over
TCP/IP.
IPM
The Images Per Minute (IPM) is a way of measuring the speed of a
printer. An IPM rate indicates the number of single-sided sheets a printer
can complete within one minute.
LED
A Light-Emitting Diode (LED) is a semiconductor device that indicates
the status of a machine.
IPP
The Internet Printing Protocol (IPP) defines a standard protocol for
printing as well as managing print jobs, media size, resolution, and so
forth. IPP can be used locally or over the Internet to hundreds of
printers, and also supports access control, authentication, and
encryption, making it a much more capable and secure printing solution
than older ones.
MAC address
Media Access Control (MAC) address is a unique identifier associated
with a network adapter. MAC address is a unique 48-bit identifier usually
written as 12 hexadecimal characters grouped in pairs (e. g.,
00-00-0c-34-11-4e). This address is usually hard-coded into a Network
Interface Card (NIC) by its manufacturer, and used as an aid for routers
trying to locate machines on large networks.
IPX/SPX
IPX/SPX stands for Internet Packet Exchange/Sequenced Packet
Exchange. It is a networking protocol used by the Novell NetWare
operating systems. IPX and SPX both provide connection services
similar to TCP/IP, with the IPX protocol having similarities to IP, and
SPX having similarities to TCP. IPX/SPX was primarily designed for
local area networks (LANs), and is a very efficient protocol for this
purpose (typically its performance exceeds that of TCP/IP on a LAN).
MFP
Multi Function Peripheral (MFP) is an office machine that includes the
following functionality in one physical body, so as to have a printer, a
copier, a fax, a scanner and etc.
MH
Modified Huffman (MH) is a compression method for decreasing the
amount of data that needs to be transmitted between the fax machines
to transfer the image recommended by ITU-T T.4. MH is a
codebook-based run-length encoding scheme optimized to efficiently
compress white space. As most faxes consist mostly of white space, this
minimizes the transmission time of most faxes.
ISO
The International Organization for Standardization (ISO) is an
international standard-setting body composed of representatives from
national standards bodies. It produces world-wide industrial and
commercial standards.
MMR
ITU-T
Modified Modified READ (MMR) is a compression method
recommended by ITU-T T.6.
The International Telecommunication Union is an international
organization established to standardize and regulate international radio
and telecommunications. Its main tasks include standardization,
allocation of the radio spectrum, and organizing interconnection
arrangements between different countries to allow international phone
calls. A -T out of ITU-T indicates telecommunication.
Modem
A device that modulates a carrier signal to encode digital information,
and also demodulates such a carrier signal to decode transmitted
information.
ITU-T No. 1 chart
Standardized test chart published by ITU-T for document facsimile
transmissions.
MR
Modified Read (MR) is a compression method recommended by ITU-T
T.4. MR encodes the first scanned line using MH. The next line is
compared to the first, the differences determined, and then the
differences are encoded and transmitted.
JBIG
Joint Bi-level Image Experts Group (JBIG) is an image compression
standard with no loss of accuracy or quality, which was designed for
Glossary_ 131
Download from Www.Somanuals.com. All Manuals Search And Download.
NetWare
PPM
A network operating system developed by Novell, Inc. It initially used
cooperative multitasking to run various services on a PC, and the
network protocols were based on the archetypal Xerox XNS stack.
Today NetWare supports TCP/IP as well as IPX/SPX.
Pages Per Minute (PPM) is a method of measurement for determining
how fast a printer works, meaning the number of pages a printer can
produce in one minute.
PRN file
OPC
An interface for a device driver, this allows software to interact with the
device driver using standard input/output system calls, which simplifies
many tasks.
Organic Photo Conductor (OPC) is a mechanism that makes a virtual
image for print using a laser beam emitted from a laser printer, and it is
usually green or gray colored and a cylinder shaped.
An exposing unit of a drum is slowly worn away by its usage of the
printer, and it should be replaced appropriately since it gets scratches
from grits of a paper.
Protocol
A convention or standard that controls or enables the connection,
communication, and data transfer between two computing endpoints.
Originals
PS
The first example of something, such as a document, photograph or text,
etc, which is copied, reproduced or translated to produce others, but
which is not itself copied or derived from something else.
See PostScript.
PSTN
The Public-Switched Telephone Network (PSTN) is the network of the
world's public circuit-switched telephone networks which, on industrial
premises, is usually routed through the switchboard.
OSI
Open Systems Interconnection (OSI) is a model developed by the
International Organization for Standardization (ISO) for communications.
OSI offers a standard, modular approach to network design that divides
the required set of complex functions into manageable, self-contained,
functional layers. The layers are, from top to bottom, Application,
Presentation, Session, Transport, Network, Data Link and Physical.
RADIUS
Remote Authentication Dial In User Service (RADIUS) is a protocol for
remote user authentication and accounting. RADIUS enables
centralized management of authentication data such as usernames and
passwords using an AAA (authentication, authorization, and accounting)
concept to manage network access.
PABX
A private automatic branch exchange (PABX) is an automatic telephone
switching system within a private enterprise.
Resolution
The sharpness of an image, measured in Dots Per Inch (DPI). The
higher the dpi, the greater the resolution.
PCL
Printer Command Language (PCL) is a Page Description Language
(PDL) developed by HP as a printer protocol and has become an
industry standard. Originally developed for early inkjet printers, PCL has
been released in varying levels for thermal, matrix printer, and page
printers.
SMB
Server Message Block (SMB) is a network protocol mainly applied to
share files, printers, serial ports, and miscellaneous communications
between nodes on a network. It also provides an authenticated
Inter-process communication mechanism.
PDF
Portable Document Format (PDF) is a proprietary file format developed
by Adobe Systems for representing two dimensional documents in a
device independent and resolution independent format.
SMTP
Simple Mail Transfer Protocol (SMTP) is the standard for e-mail
transmissions across the Internet. SMTP is a relatively simple,
text-based protocol, where one or more recipients of a message are
specified, and then the message text is transferred. It is a client-server
protocol, where the client transmits an email message to the server.
PostScript
PostScript (PS) is a page description language and programming
language used primarily in the electronic and desktop publishing areas. -
that is run in an interpreter to generate an image.
SSID
Service Set Identifier (SSID) is a name of a wireless local area network
(WLAN). All wireless devices in a WLAN use the same SSID in order to
communicate with each other. The SSIDs are case-sensitive and have a
maximum length of 32 characters.
Printer Driver
A program used to send commands and transfer data from the computer
to the printer.
Print Media
The media like paper, envelopes, labels, and transparencies which can
be used on a printer, a scanner, a fax or, a copier.
Glossary_ 132
Download from Www.Somanuals.com. All Manuals Search And Download.
Subnet Mask
Watermark
The subnet mask is used in conjunction with the network address to
determine which part of the address is the network address and which
part is the host address.
A watermark is a recognizable image or pattern in paper that appears
lighter when viewed by transmitted light. Watermarks were first
introduced in Bologna, Italy in 1282; they have been used by
papermakers to identify their product, and also on postage stamps,
currency, and other government documents to discourage
counterfeiting.
TCP/IP
The Transmission Control Protocol (TCP) and the Internet Protocol (IP);
the set of communications protocols that implement the protocol stack
on which the Internet and most commercial networks run.
WEP
Wired Equivalent Privacy (WEP) is a security protocol specified in IEEE
802.11 to provide the same level of security as that of a wired LAN. WEP
provides security by encrypting data over radio so that it is protected as
it is transmitted from one end point to another.
TCR
Transmission Confirmation Report (TCR) provides details of each
transmission such as job status, transmission result and number of
pages sent. This report can be set to print after each job or only after
failed transmissions.
WIA
Windows Imaging Architecture (WIA) is an imaging architecture that is
originally introduced in Windows Me and Windows XP. A scan can be
initiated from within these operating systems by using a WIA-compliant
scanner.
TIFF
Tagged Image File Format (TIFF) is a variable-resolution bitmapped
image format. TIFF describes image data that typically come from
scanners. TIFF images make use of tags, keywords defining the
characteristics of the image that is included in the file. This flexible and
platform-independent format can be used for pictures that have been
made by various image processing applications.
WPA
Wi-Fi Protected Access (WPA) is a class of systems to secure wireless
(Wi-Fi) computer networks, which was created to improve upon the
security features of WEP.
Toner Cartridge
WPA-PSK
A kind of bottle within a machine like printer which contains toner. Toner
is a powder used in laser printers and photocopiers, which forms the text
and images on the printed paper. Toner can be melted by the heat of the
fuser, causing it to bind to the fibers in the paper.
WPA-PSK (WPA Pre-Shared Key) is special mode of WPA for small
business or home users. A shared key, or password, is configured in the
wireless access point (WAP) and any wireless laptop or desktop
devices. WPA-PSK generates a unique key for each session between a
wireless client and the associated WAP for more advanced security.
TWAIN
An industry standard for scanners and software. By using a
TWAIN-compliant scanner with a TWAIN-compliant program, a scan can
be initiated from within the program.; an image capture API for Microsoft
Windows and Apple Macintosh operating systems.
UNC Path
Uniform Naming Convention (UNC) is a standard way to access network
shares in Window NT and other Microsoft products. The format of a
UNC path is: \\<servername>\<sharename>\<Additional directory>
URL
Uniform Resource Locator (URL) is the global address of documents
and resources on the Internet. The first part of the address indicates
what protocol to use, the second part specifies the IP address or the
domain name where the resource is located.
USB
Universal Serial Bus (USB) is a standard that was developed by the
USB Implementers Forum, Inc., to connect computers and peripherals.
Unlike the parallel port, USB is designed to concurrently connect a
single computer USB port to multiple peripherals.
Glossary_ 133
Download from Www.Somanuals.com. All Manuals Search And Download.
|
Q Logic Switch MKII BASE16 User Guide
QSC Audio Speaker System SC 323 User Guide
Radio Shack Clock 65 792 User Guide
RCA CD Player RP 7953 User Guide
Riccar Sewing Machine RL 603 User Guide
Roberts Radio Clock Radio CRD 37 User Guide
RocketFish Surge Protector RF AVS7ES User Guide
Roland MP3 Player AR 200R User Guide
Samson Microphone CS Series Microphone User Guide
Samsung Washer SW65V9W User Guide