Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
Congratulations on purchasing the Samson MPL 1502 stereo mixer! Although
this unit is designed for easy operation, we suggest you first take some time to
go through these pages so you can fully understand how we’ve implemented a
number of unique features.
In this manual, we’ll provide you with an overview of the MPL 1502 features,
followed by a guided tour of its front and rear panels. Then we’ll describe how
the MPL 1502 should be connected to your existing equipment (including wiring
diagrams) and talk about the important topics of gain structure and grounding
techniques. Next, we’ll cover a number of specific MPL 1502 features (such as
panning, equalization, auxiliary sends and returns, and channel inserts) in detail.
Finally, we’ll wrap things up with a series of applications notes describing how
you can use the MPL 1502 for both live performance and recording. You’ll also
find a warranty card enclosed—please don’t forget to fill it out and mail it so that
you can receive online technical support and so we can send you updated
information about other Samson products in the future.
SPECIAL NOTE: Should your unit ever require servicing, a Return Authorization
number (RA) is necessary. Without this number, the unit will not be accepted.
Please call Samson at 1-800-372-6766 for a Return Authorization number prior
to shipping your unit. Please retain the original packing materials and, if
possible, return the unit in its original carton and packing materials.
MPL 1502 Sys te m Fe ature s
“MPL” stands for “Microphone/Program/Line” and the name describes the broad
range of signals which can be handled by this powerful stereo mixer. In fact, the
compact design of the MPL 1502 belies an extraordinary versatility. Add excel-
lent sound quality to the equation, and you’ve got a product which is equally
useful as a live performance mixer, keyboard submixer, or even for simple
recording purposes (you’ll find descriptions of each of these applications at the
conclusion of this manual). Here are some of the MPL 1502’s main features:
• Fifteen input channels, including five stereo channels. The five monophonic
channels provide electronically balanced inputs that can be used for micro-
phone or line-level input, and the five stereo channels are ideal for line-level
sources such as outboard signal processors; CD players; tape or cassette
recorders; stereo drum machines; and keyboards and MIDI tone modules.
• An electronically balanced main stereo output for connection to a power
amplifier.
• A dedicated tape input/output that allows direct recording of a live
performance and playback of prerecorded material.
• Two auxiliary sends and two stereo auxiliary returns (which can be used as
four monophonic returns). Both sends are post-fader and post-equalizer.
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
• Independent 3-band equalization for each channel, with 15 dB of cut or boost
for low (80 Hz) and high (10 kHz) frequencies, and 12 dB of cut or boost for
the mid-range (800 Hz) frequency.
• Constant level pan controls for placing each monophonic channel in the left-
right stereo spectrum, as well as balance controls for each stereo channel
and Aux return that allow you to blend the relative levels of stereo inputs.
• Channel inserts are provided for each of the 5 monophonic input channels,
enabling you to use outboard signal processors such as outboard
equalizers, compressor/ limiters, or noise gates in a standard “effect loop.”
• Input trims for each channel are continuously adjustable from +4 to -50 dB,
making it possible to use the MPL 1502 with a wide variety of signal sources
and outboard equipment.
• Center detents for all gain, pan, balance, and EQ controls, making it easy to
use the MPL 1502 even in low-light situations such as live performance.
• Peak input LEDs for each channel, showing you when an input signal is
overloading or near overloading (these illuminate -5 dB prior to distortion).
• The provision of 48v phantom power makes it possible to plug high-quality
condenser microphones directly into the MPL 1502, without the need for
expensive and cumbersome external power supplies.
• A seven-segment front-panel meter that allows you to view at a glance the
continuous main stereo output level.
• An independent front-panel headphone jack with dedicated volume control.
• With accessory rack ears, the MPL 1502 can be mounted in any standard
19” rack (taking six rack spaces), making it easy to integrate into any exist-
ing system.
• Last but certainly not least, affordability. The MPL 1502 has been designed
from the ground up to provide versatility and excellent sound quality at a
cost-conscious price.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Guide d Tour - Ove rvie w
The following illustration shows an overview of the front panel of the MPL 1502:
1
2
3
5
6 / 7
8 / 9
10 / 11
12 / 13
14 / 15
4
MIC INPUT (BALANCED -50dB TO +4dB)
LEFT/MONO
LEFT/MONO
LEFT/MONO
LEFT/MONO
LEFT/MONO
2
1
2
1
2
1
2
1
2
1
3
3
3
3
3
S A M S O N
15 CHANNEL
STEREO MIXER
LINE INPUT (BALANCED 10KΩ -30dB TO +4dB)
MPL 1502
LINE INPUT (BALANCED 10KΩ -40dB TO +4dB
RIGHT
RIGHT
10
RIGHT
10
RIGHT
10
RIGHT
10
10
10
10
10
10
10
MPL 1502
0
0
0
0
0
0
+4
0
0
0
0
15 CHANNEL STEREO MIXER
+4
-50
+4
-50
+4
-50
+4
-50
+4
-50
-30
+4
-30
+4
-30
+4
-30
+4
-30
TRIM
0
TRIM
0
TRIM
0
TRIM
0
TRIM
0
TRIM
0
TRIM
0
TRIM
0
TRIM
0
TRIM
0
0
0
+2 +6
+2 +6
-20 -10 -6 -2
-20 -10 -6 -2
-15
+15
-15
+15
-15
+15
-15
+15
-15
+15
-15
+15
-15
+15
-15
+15
-15
+15
-15
+15
LEFT
HIGH
0
HIGH
0
HIGH
0
HIGH
0
HIGH
0
HIGH
0
HIGH
0
HIGH
0
HIGH
0
HIGH
0
RIGHT
PHANTOM
POWER
-15
-15
+15
-15
-15
+15
-15
-15
+15
+15
-15
+15
-15
+15
-15
+15
-15
-15
+15
-15
+15
-15
+15
-15
+15
MID
0
MID
0
MID
0
MID
0
MID
0
MID
0
MID
0
MID
0
MID
0
MID
0
TAPE IN
ON
OFF
+15
-15
+15
-15
+15
-15
+15
+15
-15
+15
+15
-15
+15
-15
+15
LOW
LOW
LOW
LOW
LOW
LOW
LOW
LOW
LOW
LOW
CHANNEL 14 / 15
0
0
0
0
0
0
0
0
0
0
0
L
R
BALANCE
−∞
−∞
AUX 1
−∞
−∞
−∞
−∞
−∞
−∞
−∞
AUX 1
+10
−∞
+10
+10
+10
+10
−∞
+10
+10
+10
+10
+10
+20
−∞
AUX 1
AUX 1
AUX 1
AUX 1
AUX 1
AUX 1
AUX 1
AUX 1
AUX 1 LEVEL
0
0
0
0
0
0
0
0
0
0
0
L
R
+10
AUX 2
+10
AUX 2
+10
−∞
+10
AUX 2
−∞
+10
AUX 2
+10
AUX 2
+10
AUX 2
+10
AUX 2
+10
AUX 2
+10
AUX 2
−∞
−∞
−∞
−∞
−∞
−∞
−∞
+20
AUX 2 LEVEL
−∞
AUX 2
BALANCE
L
R
L
R
L
R
L
R
L
R
L
R
L
R
L
R
L
R
L
R
0
10
PAN
0
PAN
0
PAN
0
PAN
0
PAN
0
BALANCE
BALANCE
BALANCE
BALANCE
BALANCE
HEADPHONE
LEVEL
PEAK
PEAK
PEAK
PEAK
PEAK
PEAK
PEAK
PEAK
PEAK
PEAK
0
0
0
0
0
0
+15
+15
−∞
−∞
−∞
−∞
−∞
−∞
−∞
+15
−∞
+15
+15
+15
+15
+15
+15
+15
+15
−∞
−∞
−∞
GAIN
GAIN
GAIN
GAIN
GAIN
GAIN
GAIN
GAIN
GAIN
GAIN
1
2
3
4
5
6 / 7
8 / 9
10 /11
12 /13
14 /15
MAIN
Mono channels
Stereo channels
Main section
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Guide d Tour - Mono and Ste re o Channe ls
1: Mic inputs (1 - 5) - Provided in monophonic channels only. Use these electronically balanced
1
XLR jacks to connect microphones to any of the MPL 1502’s five mono channels (channels 1 - 5).
These are intended to accept signal from low-level, low-impedance mics but can also be used for
signal from other sources (such as direct injection boxes) if the channel’s Trim control is turned
down. WARNING: Do not turn Phantom power on if signal sources other than microphones are
connected to any of these inputs. Also, do not connect a channel’s microphone input if you
already have something connected to its line input; each channel is designed to accept only one
source or the other.
2
1
1
3
2
3
10
0
2: Line inputs (1 - 15) - Use these standard 1/4” jacks to connect line-level sources such as
synthesizers, drum machines, CD players, tape decks, or effects processors to any of the MPL
1502’s fifteen mono or stereo channels. The line input jacks for monophonic channels (channels
1 - 5) are electronically balanced, so you should use balanced three-conductor cabling and
Tip/Ring/Sleeve (TRS) plugs wherever possible (unbalanced two-conductor plugs can also be
inserted into these inputs, but you’ll get better signal quality and less outside noise and hum if you
use balanced lines). The line input jacks for stereo channels (channels 6 - 15) are unbalanced.
When connecting only one monophonic signal to stereo channels, use the left (even-numbered)
input; the MPL 1502 will then treat that channel as if it is a mono channel, allowing the signal to
be panned (using the Balance control)—see the “Using Pan/Balance” section on page 18 for
more information. The “Connecting The MPL 1502” section on page 10 provides more informa-
tion on how best to use channel inputs. WARNING: Do not connect a channel’s line input if you
already have something connected to its microphone input; each channel is designed to accept
only one source or the other.
+4
-50
TRIM
0
-15
+15
HIGH
0
4
-15
-15
+15
MID
0
+15
LOW
0
+10
AUX 1
−∞
5
6
0
+10
−∞
AUX 2
3: Trim (black) - This knob determines the input level of the connected mic or line signal.
In stereo channels, it determines the input level of both the left and right inputs. Continuously
adjustable from +4 dB to -50 dB (for mono channels) or +4 dB to -30 dB (for stereo channels), the
input trim is at unity gain (no boost or cut) when set to the “0” (9 o’clock) position. The input
signal is boosted when the trim is turned to the right of “0” and attenuated when turned to the left
of “0.” For information on how to properly set this for each channel, see the section on page 14
entitled “Setting The Correct Gain Structure.”
L
R
PAN
0
PEAK
8
9
+15
−∞
GAIN
1
4: Equalizer (blue) - These knobs determine the amount of boost or attenuation in each of three
frequency areas. The high and low frequency knobs provide 15 dB of cut or boost at 10 kHz and
80 Hz, respectively, while the mid frequency knob provides 12 dB of cut or boost at 800 Hz.
The low and mid frequency controls utilize a resonant (“bell”) peaking curve, while the high
frequency control utilizes a shelving curve. In stereo channels, EQ settings affect both the left
and right inputs, although the signals remain separate. A center detent in each knob (at the “0”
position) indicates no boost or attenuation (that is, flat response). As each knob is turned
clockwise from the “0” position, the frequency area is boosted; as it is turned counterclockwise
from the “0” position, the frequency area is attenuated. For more information on the application of
EQ, see the “Using Equalization” section on page 19.
5: Auxiliary sends (light gray) - These knobs allow you to route signal to either or both of the
MPL 1502’s two monophonic Auxiliary outputs. These are typically used to create submixes (for
example, a headphone cue mix) and to feed signal from single or multiple channels to outboard
effects devices. At the “0” (2 o’clock) position, the signal is routed with unity gain (that is, no
boost or attenuation). As each knob is turned clockwise from the “0” position, the signal is
boosted; as it is turned counterclockwise from the “0” position, it is attenuated. Both Aux send 1
and Aux send 2 are post-fade; that is, the level of the signal is determined by the channel’s input
trim, its EQ settings, and the position of its gain control.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Guide d Tour - Mono and Ste re o Channe ls
6: Pan (white) - Provided in mono channels only. This knob allows you to place the input signal
14 / 15
anywhere in the left-right stereo spectrum, while keeping the overall signal level constant. When
the knob is placed at its center (detented) position, the signal is sent equally to both left and right
outputs. When moved left of center, less signal is sent to the right output (making the sound
appear left of center) and when moved right of center, less signal is sent to the left output
(making the sound appear right of center). To route a signal hard left or right, place the pan
knob either fully counterclockwise or fully clockwise.
LEFT/MONO
2
3
RIGHT
7: Balance (dark gray) - Provided in stereo channels only. When both inputs (even-numbered
and odd-numbered) are connected to a stereo channel, the even-numbered input signal is auto-
matically panned hard left and the odd-numbered input signal is automatically panned hard right.
In this case, the “Balance” knob controls the relative levels of the paired input signals. When the
knob is placed at its center (detented) position, both signals are at equal strength. When moved
left of center, the even-numbered channel remains at the same strength but the odd-numbered
channel is attenuated; when the knob is moved right of center, the odd-numbered channel
remains at the same strength but the even-numbered channel is attenuated. When placed fully
counter-clockwise, only the even-numbered channel is heard (panned hard left); when placed
fully clockwise, only the odd-numbered channel is heard (panned hard right).
10
0
+4
-30
TRIM
0
-15
+15
HIGH
0
4
-15
+15
MID
0
-15
+15
LOW
In stereo channels where only the even-numbered input is connected, the Balance knob func-
tions the same as a mono channel Pan control; see #6 above for details. For more information,
see the “Using Pan/Balance” section on page 18.
0
−∞
+10
AUX 1
5
7
0
+10
AUX 2
−∞
8: Peak LED (red) - This warning light indicates an overload situation. It lights whenever a
channel’s signal is 5 dB short of clipping. To stop it from lighting (and eliminate the accompanying
sonic distortion), turn down the channel’s Trim knob (see #3 above) or reduce the amount of
equalization boost. See the “Setting the Correct Gain Structure” and “Using Equalization”
sections in this manual (pages 14 and 19) for more information.
L
R
BALANCE
PEAK
8
9
0
−∞
+15
9: Gain (green) - In mono channels (or in stereo channels where only the odd-numbered input
is connected), this knob determines the signal level being sent to the main output as well as
affecting the signal level being sent to both Aux send. In stereo channels, this knob simultane-
ously controls the level of both the even-numbered and odd-numbered inputs (the relative levels
of the two can be adjusted with the Balance knob, as described above). In practice, you will use
the channel gain controls to continuously adjust the levels of the various signals being blended
together by the MPL 1502. The center-detented “0” position of the knob indicates unity gain (no
level attenuation or boost). Moving the knob counterclockwise from the “0” position (towards
“-∞”) causes the signal to be attenuated (at the very bottom, it is attenuated infinitely—in other
words, there is no sound). Moving it clockwise from the “0” position (towards “+15”) causes the
signal to be boosted by as much as 15 dB.
GAIN
14 /15
For best signal-to-noise ratio, all gain controls for channels carrying signal should generally be
kept at or near the “0” position. Channels that are unused should have their gain controls kept
fully counterclockwise at their “-∞” (minimum) level. See the “Setting the Correct Gain Structure”
section on page 14 for more information.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Guide d Tour - Main Se ction
MPL 1502
15 CHANNEL STEREO MIXER
0
0
+2 +6
+2 +6
-20 -10 -6 -2
-20 -10 -6 -2
LEFT
1
RIGHT
PHANTOM
POWER
2
3
TAPE IN
ON
OFF
CHANNEL 14 / 15
0
L
R
+20
−∞
AUX 1 LEVEL
BALANCE
4
6
5
0
L
R
+20
AUX 2 LEVEL
−∞
BALANCE
7
8
0
10
HEADPHONE
LEVEL
0
+15
−∞
MAIN
1: Meter - This seven-segment bar meter shows the continuous output level of
the main stereo output. For optimum signal-to-noise ratio, try to adjust all levels
so that program material is usually at or around 0 VU, with occasional but not
steady excursions to the red +2 or +6 segments. See the “Setting the Correct
Gain Structure” section on page 14 for more information.
2: Meter LEDs - These show the status of various conditions within the MPL
1502. The left LED (labeled “Phantom”) lights steadily red when phantom power
is being supplied to all 5 mic inputs (see the “Guided Tour - MPL 1502 Rear
Panel” section on page 8 for more information). The right LED (labeled “Power”)
lights steadily red when the MPL 1502 is powered on.
3: Tape In / Channel 14/15 switch - When pressed in (the “on” position), the
signal arriving at the rear panel tape inputs is automatically routed to stereo
channel 14/15, with the signal connected to the channel 14/15 line inputs
disconnected and the channel 14/15 Trim control made inactive (the tape input
signal is automatically given unity gain). When this switch is out (the “off”
position), channel 14/15 operates normally and the tape input signal is not heard.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Guide d Tour - Main Se ction
4: Stereo Auxiliary Return Level (gray) - These knobs determine the input
level of signal arriving via the MPL 1502’s two stereo Auxiliary returns. Each
return is at unity gain (no boost or attenuation) when set to the “0” (2 o’clock)
position. The input signal is boosted when the knob is turned to the right of “0”
and attenuated when turned to the left of “0.” For information on how to properly
set these, see the sections in this manual entitled “Setting the Correct Gain
Structure” and “Using the Aux Sends and Returns” (pages 14 and 20).
5: Stereo Auxiliary Return Balance (white) - These knobs determine the
relative levels of the left and right input signals connected to the MPL 1502’s two
stereo Auxiliary returns. When the knob is placed at its center (detented)
position, both left and right input signals for that Aux return are at equal strength.
When moved left of center, the left input signal remains at the same strength but
the right input signal is attenuated; when the knob is moved right of center, the
right input signal remains at the same strength but the left input signal is
attenuated. When placed fully counter-clockwise, only the left input signal is
heard (panned hard left); when placed fully clockwise, only the right input signal
is heard (panned hard right). These “radical” positions are useful when you are
using a stereo Aux return as two mono returns—see the “Using the Aux Sends
and Returns” section on page 20 for more information.
When only the left input of an Aux return is connected, its Balance knob
functions as a constant level Pan control, allowing you to continuously place the
incoming signal anywhere in the left-right stereo field.
6: Headphone Level (blue) - This knob sets the level of the signal sent to the
headphone jack (see #7 below). WARNING: To avoid possible damage to con-
nected headphones (or, worse yet, to your ears!), always turn this all the way off
(to the fully counterclockwise “0” position) before plugging in a pair of head-
phones—then raise the level slowly while listening. The Headphone Level has
no effect on the final Main Mix output level.
7: Headphone jack - Connect any standard stereo headphones to this jack (via
a standard 1/4” TRS plug) for private monitoring of the main stereo output. The
built-in MPL 1502 headphone preamp delivers 150 mw at 30 ohms.
8: Main Mix (green) - This knob determines the final output signal level—you
can think of this as being the “master fader.” Signals from all channels and
Auxiliary returns are routed here just before leaving the MPL 1502 via its left and
right main output jacks. The center detented “0” position of the knob indicates
unity gain (no level attenuation or boost). Moving the knob counterclockwise
from the “0” position (towards “-∞”) causes the signal to be attenuated (at the
very bottom, it is attenuated infinitely—in other words, there is no sound).
Moving it clockwise from the “0” position (towards “+15”) causes the signal to be
boosted by as much as 15 dB. For more information, see the “Setting The
Correct Gain Structure” section on page 14.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Guide d Tour - Re ar Pane l
1
2
POWER
PHANTOM
TIP RING SLEEVE
AVIS:
ON
CAUTION
MPL 1502
RISQUE DE CHOC ELECTRIQUE
NE PAS OUVRIR
15 CHANNEL STEREO MIXER
S A M S O N
TIP
RING
+
-
!
RISK OF ELECTRIC SHOCK
DO NOT OPEN
SAMSON TECHNOLOGIES CORP., HICKSVILLE, NEW YORK
OFF
DO NOT EXPOSE THIS EQUIPMENT
TO RAIN OR MOISTURE
SLEEVE GND
48V
FUSE RATING
TAPE OUT
(600Ω +4dΒ)
5
4
3
2
1
1
RIGHT
LEFT
2
RIGHT
LEFT/MONO RIGHT LEFT/MONO
0.3A/250V(115V)
0.15A/250V(230V)
L
VOLTAGE SELECTOR
2
1
230V
115V
R
SERIAL NUMBER
MAIN OUT
AUX SEND
AUX RETURN
CHANNEL INSERT - TIP RETURN - RING SEND
(BALANCED 600 Ω +4dB) (UNBALANCED 2KΩ +4dB)
(UNBALANCED 2KΩ +4dB)
TAPE IN
(10KΩ -10dB)
~115/230V,50/60Hz 23W
ASSEMBLED IN R.O.K.
3
4
5
6
7
8
9
1: Power on-off switch - As you may have guessed, this is what you use to
turn the MPL 1502 on and off. To avoid potential damage to your speakers, turn
the mixer on before you turn on any connected power amps—and turn it off after
the power amps are turned off.
2: Phantom switch - When this switch is turned on, the MPL 1502 delivers 48
volts of phantom power to pins 2 and 3 of all XLR microphone connectors (mono
channels 1 - 5). WARNING: Only turn this on or off with the MPL 1502 powered
down. Use phantom power only when one or more condenser microphones are
connected to the MPL 1502 (these microphones will correctly load the input in
order to “drain off” the phantom power voltage). Before turning phantom power
on, be sure to disconnect all non-microphone signal sources (such as direct
injection boxes) from the XLR mic jacks. Phantom power will generally have no
adverse affect on connected dynamic microphones; however, we strongly
recommend that you refer to the owners manual of your microphone to
determine whether or not it requires 48 volts phantom power. We cannot
assume responsibility if you damage a mic by incorrectly applying
MPL 1502 phantom power. If you’re not sure that one or more connected mics
require 48 volts phantom power, leave this switch OFF.
3: AC input - Connect the supplied standard 3-pin “EEC” plug here.
4: Voltage selector - Set this to the left (“115 V”) position for operation in the
United States and Canada. Set this to the right (“230 V”) position for operation
in other countries. This will normally be preset correctly at the factory and will
require no adjustment unless you use the MPL 1502 in a country other than the
one in which you purchased the unit.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Guide d Tour - Re ar Pane l
5: Main out (L, R) - These are the MPL 1502’s main outputs. You’ll usually use
these to connect the MPL 1502 to a power amp and speakers. The Main out
jacks are electronically balanced, so you should use balanced three-conductor
cabling and TRS plugs wherever possible (unbalanced two-conductor plugs can
also be inserted into these outputs, but you’ll get better signal quality and less
outside noise and hum if you use balanced lines). See the “Connecting the MPL
1502” section on page 10 for more information.
6: Aux Sends (1, 2) - These unbalanced 1/4” outputs allow you to route signal
from each of the two discrete Aux Sends to external devices such as effects
processors. Both Aux sends are post-fade and post-EQ. See the “Using the
Aux Sends and Returns” section on page 20 for more information.
7: Tape In/Out (L, R) - Use these two sets of dual RCA input jacks to connect
the inputs and outputs of a tape player to the MPL 1502. When the front panel
“Tape In / Channel 14/15” switch is pressed in, the input signal connected here
appears at stereo channel 14/15, at unity gain (during this operation, the channel
14/15 trim control has no effect). From there, it can be equalized if necessary
and routed to either or both Aux sends. The tape output signal is a duplicate of
the Main output, at unity gain. See the section in this manual entitled “Guided
Tour - MPL 1502 Main Section” (page 6) for more information.
8: Aux Returns (1, 2) - These unbalanced 1/4” inputs allow you to route signal
from external devices such as effects processors to either of the two stereo Aux
Returns. See the “Using the Aux Sends and Returns” section on page 20 for
more information.
9: Channel inserts (1 - 5) - Use these to insert an external effects processor
(such as outboard equalizer, compressor/limiter or noise gate) into any of the
MPL 1502’s five mono channels in an “effects loop” configuration. These jacks
accept 1/4” TRS plugs, with the ring carrying the send signal and the tip carrying
the return signal. Normally, this will be connected to a Y-cord; see the
“Connecting The MPL 1502” section on page 10 for more information and a
wiring diagram.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Conne cting The MPL 1502 - Ge ne ral Sugge s tions
The actual connections you’ll make to and from the MPL 1502 will vary accord-
ing to the environment you use it in and the particular equipment you have.
In the “MPL 1502 Applications” sections at the rear of this manual, you’ll find
some suggested setups. Here are a few basic rules concerning MPL 1502
connections that will apply in most situations:
• In general, it’s best to make all connections with the MPL 1502 and any
connected power amplifiers turned off. If you must make connections with
the power on, make sure that the Main gain control is completely down (turn
the knob fully counterclockwise). Whenever powering down, turn the Main
gain control completely down and turn off the main power amps first. Wait a
few seconds for their power supplies to discharge and then turn off all
connected equipment, turning the MPL 1502 off last.
• Try to use balanced connectors and cabling wherever possible. These kind
of connections do a better job of rejecting extraneous noise and hum and
generally provide a cleaner signal. Although the MPL 1502 will accept
unbalanced connectors throughout, it specifically provides electronically
balanced inputs for all mono line inputs (channels 1 - 5) and for its main
outputs. The wiring diagram below shows how 1/4” TRS (Tip/Ring/Sleeve)
connectors should be wired for use with these inputs and outputs:
SLEEVE
RING
TIP +
TIP
GROUND
RING -
Unbalanced cables use standard 1/4” phone connectors, wired as follows:
+ SIGNAL
GROUND
+ SIGNAL
GROUND
• Make one connection at a time and then monitor the incoming signal. If you
hear a distinct hum or buzz, you may have a grounding problem with that
particular device. See the section in this manual entitled “Grounding
Techniques” for information on how to avoid grounding problems.
• NEVER connect a microphone and line level input to the same channel
simultaneously—use one or the other. You can have some channels
connected to microphones and others to line level signals (for example, you
might want to plug mics into channels 1 - 3 and line level signals into the
remaining channels)—just don’t have both kinds of inputs connected to the
same channel. The diagram below shows how your mic connectors should
be wired:
3 - SIGNAL
1 GROUND
2 + SIGNAL
TO MIXER
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Conne cting The MPL 1502 - Ge ne ral Sugge s tions
• For single-fader control over a pair of matched signals (i.e. the left-right out-
puts of a stereo effects processor, keyboard, drum machine, tone generator,
CD player, or tape recorder), use the MPL 1502’s stereo input channels (6/7,
8/9, 10/11, 12/13, and 14/15). The Balance control in these channels will
allow you to adjust the relative levels of the two inputs, and you can also
equalize the stereo signal, with the same EQ settings applied to both inputs.
6 / 7
8 / 9
10 / 11
12 / 13
14 / 15
LEFT/MONO
LEFT/MONO
LEFT/MONO
LEFT/MONO
LEFT/MONO
LINE INPUT (BALANCED 10KΩ -30dB TO +4dB)
RIGHT
RIGHT
RIGHT
RIGHT
RIGHT
LEFT/MONO
LEFT/MONO
RIGHT
RIGHT
• There are two more “hidden” (or at least not so obvious) stereo inputs to the
MPL 1502; these are the Auxiliary returns. Use these whenever you want to
bring in a stereo signal that will not need to be equalized. Also bear in mind
that the two stereo Auxiliary returns can also be used as four monophonic
returns, with the Aux Balance controls giving you the ability to adjust the
relative levels of the left/right inputs. If you’re using the MPL 1502 in live
performance to drive a mono PA system, you may not need to take the
stereo returns from outboard effects processors.
1
2
AUX RETURN
(UNBALANCED 2KΩ +4dB)
• When connecting only one monophonic signal to a stereo channel, always
use the left (even-numbered) input. When only the left input is connected in
a stereo channel, the MPL 1502 treats that channel as if it is a mono channel
and the signal can then be panned (using the Balance control). See the
“Using Pan/Balance” and “Using the Aux Sends And Returns” sections in
this manual (pages 18 and 20) for more information.
6 / 7
8 / 9
10 / 11
12 / 13
14 / 15
LEFT/MONO
LEFT/MONO
LEFT/MONO
LEFT/MONO
LEFT/MONO
LINE INPUT (BALANCED 10KΩ -30dB TO +4dB)
Use even-numbered inputs when
connecting monophonic signal to a
stereo channel.
RIGHT
RIGHT
RIGHT
RIGHT
RIGHT
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Conne cting The MPL 1502 - Ge ne ral Sugge s tions
• Signals that are likely to require “in-line” processing (such as
compression/limiting or expansion/noise gating) should be connected to
channels 1 - 5, since these channels provide an insert connection.
Insert cables (sometimes called “Y-cords”) should terminate in standard 1/4”
TRS jacks (ring to send and tip to return), wired as follows:
SLEEVE
RING
TIP RETURN
GROUND
RING SEND
TIP
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Se tting Up and Us ing The MPL 1502
Setting up your MPL 1502 is a simple procedure which takes only a few minutes:
1. Remove all packing materials (save them in case of need for future service)
and decide where the unit is to be physically placed—it can be used on a table-
top or optionally mounted in any standard 19” rack, requiring six rack spaces.
MAIN OUT
(BALANCED 600 Ω +4dB)
RIGHT
LEFT
2. Before even plugging the unit into an AC socket, begin by connecting the
MPL 1502 main outputs into a power amp and the amp into loudspeakers. It is
never a good idea to power up any amplifier that is not connected to loud-
speakers.
3. Next, make the signal input connections to the mic or line inputs of the vari-
ous channels. WARNING: Do not connect a channel’s line input if you already
have something connected to its microphone input, or vice versa; each channel
is designed to accept only one source or the other.
S
A
M
S
O
N
SERVO - 240
4. Turn all channel trim and gain controls as well as the Main gain control fully
counterclockwise, to their “-∞” setting. Then connect the EEC main power cord
and plug the MPL 1502 into any grounded AC socket.
5. Turn on the rear panel Power switch—the “Power” LED in the meter section
will light up.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Se tting the Corre ct Gain Structure
You’re now ready to establish the correct gain structure—the key to getting the
best performance from the MPL 1502, or from any mixer, for that matter. This is
a simple procedure that ensures optimum input and output levels so that no
unnecessary noise (caused by too low a signal) or overload distortion (caused by
too high a signal) is created. Here’s a step-by-step description of how to do so:
a. With all connections made (as described above) but with the power amplifier
and MPL 1502 off, start by setting the power amplifier volume to minimum. On
the MPL 1502, turn all channel gain controls fully counterclockwise (to their “-∞”
position), and then set the Main gain control to its “0” position.
b. Set all channel input trim knobs to their fully counterclockwise (+4) position.
c. Set all channel equalizer and pan/balance knobs as well as both Aux return
balance knobs to their center detent “0” positions.
d. Set all channel Aux send knobs and both Aux return level knobs to their fully
counterclockwise (“-∞”) position.
e. Turn on all devices connected to channel line inputs and Aux returns and set
their level controls to unity gain or, if there is no unity gain indicated on their out-
put control, to maximum. If you’ve got outboard effects processors connected to
Aux returns, make sure they are sending completely “wet” (processed) signal,
with no “dry” (unprocessed) signal mixed in.
f. If any condenser microphones are connected to the MPL 1502, turn on the
rear-panel Phantom switch.* Then turn on the MPL’s rear-panel Power switch—
the Power LED in the meter section will light up. Finally, turn on the power
amplifier.
g. Play an instrument connected to one of the MPL 1502’s line inputs** and,
while doing so, slowly raise the corresponding channel gain control to the center
detented “0” position—you should see the MPL meter begin to move. Now
carefully adjust the input trim control for that channel so that the “0” segment in
the meter lights frequently and the “+2” segment lights only occasionally. If the
incoming signal seems too hot even with the input channel trim all the way at its
minimum (+4) setting, you may need to lower the output level of the instrument,
though this will rarely occur. Conversely, if the signal is too low even with the
input channel trim all the way up, something’s definitely wrong: in all likelihood,
the connecting audio cable is faulty.
h. Once you’ve set the optimum level in step (g) above, continue playing the
instrument and slowly raise the power amplifier volume until you reach the level
you want to hear.
i. Repeat step (g) above for each instrument connected to the MPL 1502
channel line inputs.
* CAUTION: Before turning phantom power on, be sure to disconnect all non-
microphone signal sources (such as direct injection boxes) from the mic jacks.
** If you’re using an instrument such as electric guitar or bass, we recommend
that you connect it to the MPL 1502 with a direct injection box to ensure correct
impedance.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Se tting the Corre ct Gain Structure
j. The procedure for setting optimum microphone levels is virtually identical; sing
or speak into the mic at the level you expect to use in performance while slowly
raising the gain control for that channel to its center detented “0” position. Then
carefully adjust the input trim control for that channel while watching the meter,
until the “0” segment lights frequently and the “+2” segment lights only occasion-
ally. You should expect that microphone inputs will require rather more in the
way of input trim boost than line inputs.
k. If you have any outboard signal processors connected to the Aux send and
return jacks on the rear panel, follow this step. Because outboard effects
processors can sometimes be quite noisy, it’s particularly important to maximize
the amount of signal being sent to them via the MPL 1502 Aux sends. The idea
is to drive these devices as hot as possible (short of overloading them) and then
to use the corresponding Aux return level to carefully adjust the amount of
processed signal being blended with the dry signal. To set optimum Aux send
levels, use a channel that has already had its gain structure adjusted in step (g)
or (j) above. Turn both Aux send knobs for that channel to their “0” (unity gain)
position and then play the instrument (or sing into the microphone) connected to
that channel. Adjust the input levels of connected outboard effects processors
so that their meter shows incoming signal normally in the 0 vu range (with only
occasional higher excursions). Then it’s time to optimize the Aux return levels.
While continuing to play your instrument (or continuing to sing into the micro-
phone), slowly raise each Aux return level control until you hear the desired
amount of processed signal added to the dry signal. For more information, see
the “Using the Aux Sends and Returns” section on page 20.
l. The gain structure is now correctly set—you’ve optimized the level of all
signals coming into and out of the MPL 1502, and the end result will be minimum
noise and distortion and maximum clean sound. You’ll now find that the majority
of your mixes can be accomplished with most channel gain controls at or near
their center detented “0” (unity gain) position and that the channel peak LEDs
rarely if ever light (remember, if they do light, it means that something is
distorting!). If you need to make adjustments to the overall level, use the level
control of your power amplifier.
If you encounter difficulty with any aspect of setting up or using your MPL 1502,
you can call Samson Technical Support (516-932-1062) between 9 AM and 5
PM EST.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Grounding Te chnique s
Hum and buzz are the biggest enemies you face when interconnecting a large
number of different pieces of equipment to a central audio mixer. This is
because each piece of equipment may operate at a marginally different voltage
(this difference is called potential) and, when two devices at slightly different
potential are physically connected with audio cabling, the end result can be
nasty, extraneous noise (mind you, connecting two devices at very different
potential can result in a major electrical shock!).
However, there are several steps you can take to avoid grounding problems.
First, assuming you have an isolated electrical circuit that can handle the
electrical demands of your mixer and all connected audio equipment (these
needs will usually be modest), you should always plug your mixer and all
connected equipment into the same circuit. If possible, nothing else but this
equipment should be connected to that circuit. If you can’t do this, at least avoid
plugging your mixer and audio equipment into the same circuit that is already
powering things like heavy machinery, air conditioners, heaters, refrigerators,
washing machines, neon signs or fluorescent light fixtures. One particular culprit
that will almost certainly create problems is the standard light dimmer (the kind
that uses silicon controlled rectifiers). Where low-level lighting is desired, use
incandescent fixtures with autotransformer-type dimmers (sometimes called
Variacs) instead—these cost considerably more than the standard dimmer you’ll
find at your local hardware store, but are well worth the extra expense.
Three-prong plugs (such as the one used by the MPL 1502) should always be
used as is; don’t use adapters to lift the ground (unless you’re using a “star
ground network”—see below). If you hear hum or buzz from a device that uses
a two-prong plug (or an external two-prong AC/DC adapter), you can try revers-
ing the plug in the socket. If that doesn’t work, you may need to physically
ground that device’s chassis by connecting a wire (called a strap) from it to a
grounded piece of metal such as rack ears. Some pieces of equipment have a
screw-type ground post to which the strap can be connected; if not, you can
attach some kind of metallic binding post to the case itself. If you are using rack-
mounted audio devices and are experiencing hum or buzz, there’s a simple test
to determine the source of the problem: while keeping all devices powered on
and connected with audio cabling, physically remove each device, one by one,
from the rack. If the hum disappears when a particular device is removed, you’ll
know that device is the culprit.
We also recommend that you use balanced audio cabling and connectors
wherever possible. The MPL 1502 provides electronically balanced inputs for all
line channel inputs and for its main outputs. The wiring diagram in the
“Connecting The MPL 1502” section of this manual (page 10) shows how 1/4”
TRS (Tip/Ring/Sleeve) connectors should be wired for use with these inputs and
outputs.
In addition, you can minimize possible interference by planning your audio,
electrical, and computer cable runs so that they are as far apart from one
another as possible and so they don’t run parallel to one another. If they have to
cross, try to ensure that they do so at a 90° angle (that is, perpendicular to one
another). In particular, try to keep audio cabling away from external AC/DC
adapters.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Grounding Te chnique s
If you’re using the MPL 1502 in a fixed location such as a recording studio, you
may want to invest the time and money into creating a star ground network. This
is by far the best technique for avoiding grounding problems. It involves using a
formidable ground source such as a cold water pipe or a copper spike driven into
the earth. A thick grounding cable is connected to that source and then brought
to a central distribution point; from there, individual cables are connected to each
piece of equipment. This setup also requires that you lift the ground plug of all
three-prong AC connectors, so there is the possibility of danger if it is done incor-
rectly. We strongly recommend that you contract with a qualified professional to
carry out this or any kind of electrical work.
Another, less common problem you may encounter is that of oscillation (a ringing
tone), which, apart from being annoying, is potentially dangerous to your
speakers. This is generally caused either by poor outside wiring or by returning
a signal out of phase (most commonly from an outboard signal processor). If
audible oscillation occurs, try isolating each input signal by turning down all other
inputs. If one signal alone is causing the problem, you should be able to elimi-
nate the oscillation by reversing that signal’s phase (many signal processors
have a switch that allows you to do this).
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Us ing Pan/ Balance
The final Main output of the MPL 1502 is stereo—that is, there are two discrete
output jacks, labeled “left” and “right,” which will normally be routed to two
discrete speakers.* Because of this, you will usually be working with a stereo
field that ranges from hard left to hard right. The Pan control in each mono
channel (and the Balance control in each stereo channel, when only the left
[even-numbered] input is connected) allows you to place each individual sound
at any point within this left-right field, while keeping the overall level constant.
L
R
PAN
You can use stereo panning creatively in a variety of ways: For example, you
might want to have guitars coming from one speaker and keyboards from
another, or you might use panning to “spread” the signal from a piano miked with
two microphones—one over the bass notes (panned left) and the other over the
treble notes (panned right). By turning a Pan knob while a signal is present, the
sound appears to move in space (a process known as dynamic panning)—this
can be particularly effective when applied to sound effects.
L
R
BALANCE
In live performance, you may want to resist the temptation to pan anything
completely hard left or right, since some members of the audience not seated in
the center of the venue may miss some signal altogether. In these circum-
stances, you’re best to use modest panning, with signals routed no further than
the 9 o’clock and 3 o’clock positions.
In stereo channels where both inputs are connected, the even-numbered input
signal is automatically panned hard left and the odd-numbered input signal is
automatically panned hard right. The Balance knob in these channels controls
the relative levels of the two input signals. When the knob is placed at its center
(detented) position, both the even-numbered and odd-numbered channels are at
equal strength. When moved left of center, the signal of the even-numbered
channel remains the same but the signal of the odd-numbered channel is attenu-
ated; when the knob is moved right of center, the the signal of the odd-numbered
channel remains the same but the signal of the even-numbered channel is atten-
uated. When placed fully counter-clockwise, only the even-numbered channel is
heard; when placed fully clockwise, only the odd-numbered channel is heard.
In the stereo Aux return section, the Balance control works in a similar fashion.
When both inputs are connected, the left signal is automatically panned hard left
and the right signal is automatically panned hard right. The Balance knob con-
trols the relative levels of the two signals. When the knob is placed at its center
(detented) position, both the left and right signals are at equal strength. When
moved left of center, the left input signal remains the same but the right input sig-
nal is attenuated; when the knob is moved right of center, the right input signal
remains the same but the left input signal is attenuated. When placed fully
counter-clockwise, only the left input is heard (panned hard left); when placed
fully clockwise, only the right input is heard (panned hard right).
If you connect different monophonic devices (such as effects processors) to both
the left and right inputs of an Aux return, you can use the Aux Balance control to
blend the relative contribution of each. If you turn the Balance knob fully coun-
terclockwise, you’ll hear only the device connected to the left Aux input; if you
turn it fully clockwise, you’ll hear only the device connected to the right Aux input.
For more information, see the “Using Aux Sends and Returns” section on page
20.
* You can, of course, also use the MPL 1502 monophonically—simply route the
same signal to both the left and right outputs.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Us ing Equalization
One of the most exciting aspects of using a mixer such as the MPL 1502 is the
ability to shape a sound, using a process called equalization. But there are few
areas of sound engineering more misunderstood than equalization, and, just as
good EQ can really help a sound, bad EQ can really hurt it, so read on...
0
Every naturally occurring sound consists of a broad range of pitches, or
frequencies, combined together in a unique way. This blend is what gives every
sound its distinctive tonal color. The EQ section in a mixer allows you to alter a
sound by boosting or attenuating specific frequency areas. The MPL 1502
provides independent three-band equalization controls for each of its five mono
and five stereo input channels. Each EQ knob is labeled with the maximum
amount of cut or boost provided (± 15 dB in the case of the high and low
frequencies and ± 12 dB in the case of the middle frequency).
-15
+15
HIGH
0
-15
+15
MID
0
We provided these particular frequency areas because they have maximum
impact on musical signals—that’s why they are sometimes known as “sweet
spots.” When an EQ knob is in its center detented position (“0”), it is having no
effect. When it is moved right of center, the particular frequency area is being
boosted; when it is moved left of center, the frequency area is being attenuated.
The high EQ control employs what is known as a shelving curve, where only
frequencies above the specified area are affected. The low and mid frequency
controls employ what is known as a peaking resonant curve (sometimes known
as a bell curve), where frequencies both above and below the specified area are
affected.
-15
+15
LOW
In most instances, the best way to approach equalization is to think in terms of
which frequency areas you need to attenuate, as opposed to which ones you
need to boost (boosting a frequency area also has the effect of boosting the
overall signal; too much EQ boost can actually cause overload—with the
accompanying Peak LED warning!). Be aware of the phenomenon of masking,
where loud sounds in one frequency range obscure softer sounds in the same
range; by cutting EQ “notches” in a loud signal, you can actually make room for a
softer one to shine through. And try not to think of EQ as a miracle worker—no
amount of equalization can put a singer in tune or remove the distortion from an
overloaded input signal! The key is to get the signal right in the first place, by
using correct gain structure and mic placement.
Although the specific EQ you will apply to a signal is very much a matter of
personal taste, here are a few general suggestions: Boosting the low frequency
of instruments such as bass drums or bass guitar will add warmth and make the
sound “fatter”; conversely, you may want to attenuate the low frequency compo-
nent of instruments such as cymbals, high-hats, and shakers so as to “thin” them
out. The mid-range control is particularly effective for vocals—attenuating it can
give a vocal performance more of an “FM-radio” feel, while boosting it can help a
vocal cut through dense instrumentation. Be careful not to boost high frequen-
cies too much or you risk adding hiss to the signal, though just a touch can help
add “shimmer” to an acoustic guitar, ride cymbal, or high-hat. Finally, because
the MPL 1502 high EQ utilizes a shelving curve, attenuated settings can be used
to reduce hiss (which is composed almost exclusively of high frequencies).
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Us ing Aux Se nds and Re turns
The MPL 1502’s two Auxiliary sends allow you to combine the signal from
0
multiple channels and send the resulting mix to external devices such as effects
processors. When an Aux send knob is at the “0” position, the signal is routed
with unity gain (that is, no boost or attenuation). As it is turned clockwise from
the 0 position, the signal is boosted; as it is turned counterclockwise from the 0
position, it is attenuated. Both Aux sends are post-fade; that is, the level of the
signal is determined by the input trim, the EQ settings, and the position of the
channel gain control. In other words, raising or lowering the input level of the
channel will affect the send level as well.
−∞
−∞
+10
AUX 1
0
+10
AUX 2
The MPL 1502 also provides two stereo Auxiliary returns. These allow you to
return signal from outboard devices, either in stereo pairs or monophonically
(many popular effects processors provide a single mono input but have two
stereo outputs). In practice, you’ll probably want to use the Auxiliary returns to
bring in signal from connected effects processors. If the effects processors have
stereo outputs, they should be connected to both the left and right Auxiliary
return inputs so that their stereo integrity is retained. If they have mono outputs,
you can route them to either the left or right inputs and then use the Auxiliary
return Balance control to adjust the relative level of each paired signal. In this
way, you can actually connect up to four monophonic devices to the MPL 1502’s
Aux return section.
0
L
R
+20
AUX 1 LEVEL
−∞
BALANCE
0
L
R
+20
AUX 2 LEVEL
−∞
BALANCE
Each of the stereo Auxiliary returns is somewhat similar to a stereo channel,
except that a signal being brought into to a stereo channel can be equalized if
necessary and optionally sent on to other outboard devices (via Aux sends or
channel inserts).
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Us ing Channe l Ins e rts
In addition to using Auxiliary sends and returns to access outboard devices, the
MPL 1502 also provides channel inserts for the first five (mono) input channels.
These should be used when you want to affect just one channel’s signal, as
opposed to signal from several channels—most often, this will be for dynamic
processing purposes (such as outboard equalization, compression/limiting, or
noise gating). You can also use the channel insert sends as post-eq (but
pre-fade) direct outputs, if you need to route a single monophonic signal to an
external device such as a tape deck.
5
4
3
2
1
CHANNEL INSERT - TIP RETURN - RING SEND
The channel insert jacks on the rear panel accept 1/4” TRS plugs, with the ring
carrying the send signal and the tip carrying the return signal; this will normally
be connected to a Y-cord (see the “Connecting The MPL 1502” section in this
manual for a wiring diagram). This configuration is sometimes known as an
“effects loop,” since the signal is sent and returned over the same cable.
If nothing is plugged into the channel insert jacks, they have no effect—but if you
connect them to a passive device like a patchbay, you’ll need to normal (perma-
nently connect) or half-normal (connection is made unless overriden by a patch
cord) the send to the return. The insert signal is returned just before the channel
fader. For this reason, you’ll have to be careful to set the output of external
devices connected this way to unity gain.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Applications
Here are four suggested applications for the MPL 1502; bear in mind that your particular circumstance may dictate
changes in these suggested signal connections and routings.
Application 1 - Us ing The MPL 1502 As A Main Live Mixe r
The main connections here involve routing the MPL 1502’s Main output to the input of a power amplifier, and, from there,
to PA speakers. Microphones and monophonic line level signals requiring insert processing are connected to mono
channel inputs, while stereo line level signals are connected to stereo channel inputs. A tape deck is connected to the
rear panel tape in/outs (making it easy to record the gig) and, for playback, the signal is returned to stereo channel 14/15
by setting the “Tape In / Channel 14/15” to the “on” position (pressing it in). Signal processors are connected to Aux
send 2 (and either or both Aux returns) and to channel inserts as required. A submix from Aux send 1 is connected to
the input of a second power amplifier driving onstage monitor speakers so that performers can receive a monitor mix
independent of the house mix.
L
R
S
A
M
S
O
N
SERVO - 240
POWER
PHANTOM
1
2
3
4
5
6
/
7
8
/
9
10
/
11
12
/
13
14 15
/
TIP RING SLEEVE
AVIS:
ON
CAUTION
MIC INPUT (BALANCED -50dB TO +4dB)
MPL 1502
15 CHANNEL STEREO MIXER
RISQUE DE CHOC ELECTRIQUE
S A M S O N
TIP
RING
+
-
!
RISK OF ELECTRIC SHOCK
DO NOT OPEN
NE PAS OUVRIR
DO NOT EXPOSE THIS EQUIPMENT
TO RAIN OR MOISTURE
LEFT/MONO
LEFT/MONO
LEFT/MONO
LEFT/MONO
LEFT/MONO
OFF
SAMSON TECHNOLOGIES CORP., HICKSVILLE, NEW YORK
SLEEVE GND
2
1
2
1
2
1
2
1
2
1
48V
FUSE RATING
TAPE OUT
(600Ω +4dΒ)
3
3
3
3
3
1
RIGHT
LEFT/MONO
RIGHT LEFT/MONO
5
4
3
2
1
RIGHT
LEFT
2
S A M S O N
0.3A/250V(115V)
0.15A/250V(230V)
L
VOLTAGE SELECTOR
LINE INPUT (BALANCED 10KΩ -30dB TO +4dB)
15 CHANNEL
STEREO MIXER
MPL 1502
2
1
115V
230V
R
SERIAL NUMBER
MAIN OUT
(BALANCED 600
AUX SEND
+4dB) (UNBALANCED 2KΩ +4dB)
AUX RETURN
(UNBALANCED 2KΩ +4dB)
CHANNEL INSERT
-
TIP RETURN RING SEND
-
Ω
LINE INPUT (BALANCED 10KΩ -40dB TO +4dB
RIGHT
RIGHT
10
RIGHT
10
RIGHT
10
RIGHT
TAPE IN
(10KΩ -10dB)
~115/230V,50/60Hz 23W
10
10
10
10
10
10
10
MPL 1502
ASSEMBLED IN R.O.K.
0
0
+4
0
0
0
0
+4
0
0
0
0
15 CHANNEL STEREO MIXER
+4
-50
+4
-50
+4
-50
+4
-50
+4
-50
-30
+4
-30
+4
-30
+4
-30
-30
TRIM
0
TRIM
0
TRIM
0
TRIM
0
TRIM
0
TRIM
0
TRIM
0
TRIM
0
TRIM
0
TRIM
0
Ring
SIGNAL PROCESSOR
Tip
-20 -10 -6 -2
-20 -10 -6 -2
0
0
+2 +6
+2 +6
-15
+15
-15
+15
-15
+15
-15
+15
-15
+15
-15
+15
-15
+15
-15
+15
-15
+15
-15
+15
LEFT
HIGH
0
HIGH
0
HIGH
0
HIGH
0
HIGH
0
HIGH
0
HIGH
0
HIGH
0
HIGH
0
HIGH
0
RIGHT
S
A
M
S
O
N
+15db
+15db
PHANTOM
POWER
0
0
-15db
+15db
-15db
+15db
-15
-15
+15
-15
-15
+15
-15
-15
+15
+15
-15
+15
-15
+15
-15
+15
-15
-15
+15
-15
+15
-15
+15
-15
+15
MID
0
MID
0
MID
0
MID
0
MID
0
MID
0
MID
0
MID
0
MID
0
MID
0
0
0
TAPE IN
ON
-15db
-15db
OFF
+15
-15
+15
-15
+15
-15
+15
+15
-15
+15
+15
-15
+15
-15
+15
LOW
LOW
LOW
LOW
LOW
LOW
LOW
LOW
LOW
LOW
CHANNEL 14 15
/
R L
0
0
0
0
0
0
0
0
0
0
0
−∞
−∞
−∞
−∞
−∞
−∞
−∞
−∞
L
R
BALANCE
SIGNAL PROCESSOR
−∞
+10
−∞
+10
+10
+10
+10
−∞
+10
+10
+10
+10
+10
+20
LEVEL
−∞
AUX
AUX
1
AUX
AUX
1
AUX
AUX
1
AUX
AUX
1
AUX
AUX
1
AUX
AUX
1
AUX
AUX
1
AUX
AUX
1
AUX
AUX
1
AUX
AUX
1
AUX
1
0
0
0
0
0
0
0
0
0
0
0
+10
+10
−∞
+10
−∞
+10
−∞
+10
+10
+10
+10
+10
+10
L
R
−∞
−∞
−∞
−∞
−∞
−∞
+20
LEVEL
−∞
AUX
2
2
2
2
2
2
2
2
2
2
2
BALANCE
L
R
R
L
R
L
R
L
R
L
R
L
R
L
R
L
R
L
R
L
R
L
R
0
10
PAN
0
PAN
0
PAN
0
PAN
0
PAN
0
BALANCE
BALANCE
BALANCE
BALANCE
BALANCE
L
HEADPHONE
LEVEL
PEAK
PEAK
PEAK
PEAK
PEAK
PEAK
PEAK
PEAK
PEAK
PEAK
0
0
0
0
0
0
CASSETTE or DAT
+15
+15
−∞
−∞
+15
−∞
+15
−∞
+15
−∞
+15
−∞
+15
−∞
+15
−∞
+15
−∞
+15
−∞
+15
−∞
GAIN
GAIN
GAIN
GAIN
GAIN
GAIN
GAIN
GAIN
GAIN
GAIN
1
2
3
4
5
6
/
7
8
/
9
10 /11
12 /13
14 /15
MAIN
R
L
R
L
MIDI TONE GENERATOR
DRUM MACHINE
S
A
M
S
O
N
SERVO - 240
MIDI KEYBOARD
R
L
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Applications
Application 2 - Us ing The MPL 1502 As An Ons tage Monitor Mixe r
Here, the MPL 1502 is receiving monophonic signal into its line inputs from the direct channel outputs of a main live
mixer. Its Main output is connected to an outboard signal processor (typically an equalizer) prior to being routed to an
amplifier and onstage monitors. This allows the overall mix to be adjusted in order to eliminate feedback and ringing
problems.
L
R
S
A
M
S
O
N
SERVO - 240
L
R
SIGNAL PROCESSOR
R
L
S
A
M
S
O
N
+15db
+15db
0
0
-15db
+15db
-15db
+15db
0
0
-15db
-15db
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
0
0
0
0
0
0
0
0
0
0
0
0
+4
+4
+4
+4
+4
+4
+4
+4
+4
+4
+4
+4
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
0
0
0
0
0
0
0
0
0
0
0
0
-15
+15
-15
+15
-15
+15
-15
+15
-15
+15
-15
+15
-15
+15
-15
+15
-15
+15
-15
+15
-15
+15
-15
+15
0
0
0
0
0
0
0
0
0
0
0
0
-12
+12
-12
+12
-12
+12
-12
+12
-12
+12
-12
+12
-12
+12
-12
+12
-12
+12
-12
+12
-12
+12
-12
+12
0
0
0
0
0
0
0
0
0
0
0
0
-12
-15
+12
-12
-15
+12
-12
-15
+12
-12
-15
+12
-12
-15
+12
-12
-15
+12
-12
-15
+12
-12
-15
+12
-12
-15
+12
-12
-15
+12
-12
-15
+12
-12
-15
+12
0
0
0
0
0
0
0
0
0
0
0
0
+15
+15
+15
+15
+15
+15
+15
+15
+15
+15
+15
+15
PFL (SOLO)
PFL (SOLO)
PFL (SOLO)
PFL (SOLO)
PFL (SOLO)
PFL (SOLO)
PFL (SOLO)
PFL (SOLO)
PFL (SOLO)
PFL (SOLO)
PFL (SOLO)
PFL (SOLO)
+15
+15
+15
+15
+15
+15
+15
+15
+15
+15
+15
+15
+15
0
0
0
0
0
0
0
0
0
0
0
0
0
0
db
db
db
db
db
db
db
db
db
db
db
db
db
∞
∞
∞
∞
∞
∞
∞
∞
∞
∞
∞
∞
∞
POWER
PHANTOM
1
2
3
4
5
6
/
7
8
/
9
10
/
11
12
/
13
14
/
15
TIP RING SLEEVE
AVIS:
ON
MIC INPUT (BALANCED -50dB TO +4dB)
CAUTION
MPL 1502
S A M S O N
15 CHANNEL STEREO MIXER
RISQUE DE CHOC ELECTRIQUE
TIP
RING
+
-
!
RISK OF ELECTRIC SHOCK
DO NOT OPEN
LEFT/ONO
LEFTONO
LEFT/MONO
LEFT/MONO
LEFT/ONO
NE PAS OUVRIR
DO NOT EXPOSE THIS EQUIPMENT
TO RAIN OR MOISTURE
OFF
SAMSON TECHNOLOGIES CORP., HICKSVILLE, NEW YORK
SLEEVE GND
2
1
2
1
2
1
2
1
2
1
48V
FUSE RATING
3
3
3
3
3
TAPE OUT
(600Ω +4dΒ)
5
4
3
2
1
RIGHT
LEFT
2
1
RIGHT
LEFT/MONO
RIGHT LEFT/MONO
S A M S O N
0.3A/250V(115V)
0.15A/250V(230V)
L
VOLTAGE SELECTOR
LINE INPUT (BALANCED 10KΩ -30dB TO +4dB)
15 CHANNEL
STEREO MIXER
MPL 1502
2
1
115V
230V
R
SERIAL NUMBER
MAIN OUT
(BALANCED 600
AUX SEND
+4dB) (UNBALANCED 2KΩ +4dB)
AUX RETURN
(UNBALANCED 2KΩ +4dB)
CHANNEL INSERT
-
TIP RETURN
-
RING SEND
LINE INPUT (BALANCED 10KΩ -40dB TO +4dB
RIGHT
RIGHT
10
RIGHT
10
RIGHT
10
RIGHT
Ω
TAPE IN
~115/230V,50/60Hz 23W
10
10
10
10
10
10
10
(10KΩ -10dB)
MPL 1502
0
0
+4
0
0
0
0
+4
ASSEMBLED IN R.O.K.
0
0
0
0
15 CHANNEL STEREO MIXER
+4
-30
+4
-30
+4
-30
+4
-30
+4
-30
-30
+4
-30
+4
-30
+4
-30
-30
TRIM
0
TRIM
0
TRIM
0
TRIM
0
TRIM
0
TRIM
0
TRIM
0
TRIM
0
TRIM
0
TRIM
0
-20 -10 -6 -2
-20 -10 -6 -2
0
0
+2 +6
+2 +6
-15
+15
-15
+15
-15
+15
-15
+15
-15
+15
-15
+15
-15
+15
-15
+15
-15
+15
-15
+15
LEFT
HIGH
0
HIGH
0
HIGH
0
HIGH
0
HIGH
0
HIGH
0
HIGH
0
HIGH
0
HIGH
0
HIGH
0
RIGHT
PHANTOM
POWER
-15
-15
+15
-15
-15
+15
-15
-15
+15
+15
-15
+15
-15
+15
-15
+15
-15
-15
+15
-15
+15
-15
+15
-15
+15
MID
0
MID
0
MID
0
MID
0
MID
0
MID
0
MID
0
MID
0
MID
0
MID
0
TAPE IN
OFF
ON
+15
-15
+15
-15
+15
-15
+15
+15
-15
+15
+15
-15
+15
-15
+15
LOW
LOW
LOW
LOW
LOW
LOW
LOW
LOW
LOW
LOW
CHANNEL 14 15
/
0
0
0
0
0
0
0
0
0
0
0
−∞
−∞
−∞
−∞
−∞
−∞
−∞
−∞
L
R
BALANCE
−∞
+10
−∞
+10
+10
+10
+10
−∞
+10
+10
+10
+10
+10
+20
−∞
AUX
AUX
1
AUX
AUX
1
AUX
AUX
1
AUX
AUX
1
AUX
AUX
1
AUX
AUX
1
AUX
AUX
1
AUX
AUX
1
AUX
AUX
1
AUX
AUX
1
AUX
1
LEVEL
0
0
0
0
0
0
0
0
0
0
0
+10
+10
−∞
+10
−∞
+10
−∞
+10
+10
+10
+10
+10
+10
L
R
−∞
−∞
−∞
−∞
−∞
−∞
+20
LEVEL
−∞
AUX
2
2
2
2
2
2
2
2
2
2
2
BALANCE
L
R
L
R
L
R
L
R
L
R
L
R
L
R
L
R
L
R
L
R
0
10
PAN
0
PAN
0
PAN
0
PAN
0
PAN
0
BALANCE
BALANCE
BALANCE
BALANCE
BALANCE
HEADPHONE
LEVEL
PEAK
PEAK
PEAK
PEAK
PEAK
PEAK
PEAK
PEAK
PEAK
PEAK
0
0
0
0
0
0
+15
+15
−∞
−∞
+15
−∞
+15
−∞
+15
−∞
+15
−∞
+15
−∞
+15
−∞
+15
−∞
+15
−∞
+15
−∞
GAIN
GAIN
GAIN
GAIN
GAIN
GAIN
GAIN
GAIN
GAIN
GAIN
1
2
3
4
5
6
/
7
8
/
9
10 /11
12 /13
14 /15
MAIN
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Applications
Application 3 - Us ing The MPL 1502 As A Ke yboard Submixe r
Here, various keyboards and MIDI tone generators are connected to the mono and stereo line inputs of the MPL 1502.
Signal processors are connected to Aux sends and returns and to channel inserts as required. The Main output can then
be routed to a stereo input channel of a live performance or recording mixing console, with the performer having
complete control over the blend of signals being provided to the sound engineer.
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
MIDI TONE GENERATOR
0
0
0
0
0
0
0
0
0
0
0
0
+4
+4
+4
+4
+4
+4
+4
+4
+4
+4
+4
+4
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
0
0
0
0
0
0
0
0
0
0
0
0
-15
+15
-15
+15
-15
+15
-15
+15
-15
+15
-15
+15
-15
+15
-15
+15
-15
+15
-15
+15
-15
+15
-15
+15
0
0
0
0
0
0
0
0
0
0
0
0
L
R
-12
+12
-12
+12
-12
+12
-12
+12
-12
+12
-12
+12
-12
+12
-12
+12
-12
+12
-12
+12
-12
+12
-12
+12
0
0
0
0
0
0
0
0
0
0
0
0
-12
-15
+12
-12
-15
+12
-12
-15
+12
-12
-15
+12
-12
-15
+12
-12
-15
+12
-12
-15
+12
-12
-15
+12
-12
-15
+12
-12
-15
+12
-12
-15
+12
-12
-15
+12
0
0
0
0
0
0
0
0
0
0
0
0
+15
+15
+15
+15
+15
+15
+15
+15
+15
+15
+15
+15
MIDI TONE GENERATOR
PFL (SOLO)
PFL (SOLO)
PFL (SOLO)
PFL (SOLO)
PFL (SOLO)
PFL (SOLO)
PFL (SOLO)
PFL (SOLO)
PFL (SOLO)
PFL (SOLO)
PFL (SOLO)
PFL (SOLO)
+15
+15
+15
+15
+15
+15
+15
+15
+15
+15
+15
+15
+15
0
0
0
0
0
0
0
0
0
0
0
0
0
0
L
R
db
db
db
db
db
db
db
db
db
db
db
db
db
∞
∞
∞
∞
∞
∞
∞
∞
∞
∞
∞
∞
∞
SIGNAL PROCESSOR
L
R
POWER
PHANTOM
TIP RING SLEEVE
AVIS:
ON
CAUTION
MPL 1502
S A M S O N
15 CHANNEL STEREO MIXER
RISQUE DE CHOC ELECTRIQUE
TIP
RING
+
-
!
RISK OF ELECTRIC SHOCK
DO NOT OPEN
NE PAS OUVRIR
DO NOT EXPOSE THIS EQUIPMENT
TO RAIN OR MOISTURE
OFF
SAMSON TECHNOLOGIES CORP., HICKSVILLE, NEW YORK
SLEEVE GND
48V
FUSE RATING
TAPE OUT
(600Ω +4dΒ)
RIGHT
LEFT
2
1
RIGHT
LEFT/MONO
RIGHT LEFT/MONO
5
4
3
2
1
0.3A/250V(115V)
0.15A/250V(230V)
L
VOLTAGE SELECTOR
2
1
115V
230V
R
SERIAL NUMBER
MAIN OUT
(BALANCED 600
AUX SEND
+4dB) (UNBALANCED 2KΩ +4dB)
AUX RETURN
(UNBALANCED 2KΩ +4dB)
CHANNEL INSERT
-
TIP RETURN RING SEND
-
Ω
TAPE IN
~115/230V,50/60Hz 23W
(10KΩ -10dB)
ASSEMBLED IN R.O.K.
SIGNAL PROCESSOR
R
L
1
2
3
4
5
6
/
7
8
/
9
10
/
11
12
/
13
14 15
/
MIDI KEYBOARD
MIC INPUT (BALANCED -50dB TO +4dB)
LEFT/ONO
LEFTONO
LEFT/ONO
LEFT/ONO
LEFT/MONO
2
1
2
1
2
1
2
1
2
1
3
3
3
3
3
S A M S O N
LINE INPUT (BALANCED 10KΩ -30dB TO +4dB)
15 CHANNEL
STEREO MIXER
MPL 1502
LINE INPUT (BALANCED 10KΩ -40dB TO +4dB
RIGHT
RIGHT
10
RIGHT
10
RIGHT
10
RIGHT
10
10
10
10
10
10
10
MPL 1502
0
0
+4
0
0
0
0
+4
0
0
0
0
15 CHANNEL STEREO MIXER
+4
-30
+4
-30
+4
-30
+4
-30
+4
-30
-30
+4
-30
+4
-30
+4
-30
-30
TRIM
0
TRIM
0
TRIM
0
TRIM
0
TRIM
0
TRIM
0
TRIM
0
TRIM
0
TRIM
0
TRIM
0
-20 -10 -6 -2
-20 -10 -6 -2
0
0
+2 +6
+2 +6
-15
+15
-15
+15
-15
+15
-15
+15
-15
+15
-15
+15
-15
+15
-15
+15
-15
+15
-15
+15
LEFT
HIGH
0
HIGH
0
HIGH
0
HIGH
0
HIGH
0
HIGH
0
HIGH
0
HIGH
0
HIGH
0
HIGH
0
RIGHT
PHANTOM
POWER
-15
-15
+15
-15
-15
+15
-15
-15
+15
+15
-15
+15
-15
+15
-15
+15
-15
-15
+15
-15
+15
-15
+15
-15
+15
MID
0
MID
0
MID
0
MID
0
MID
0
MID
0
MID
0
MID
0
MID
0
MID
0
TAPE IN
OFF
ON
+15
-15
+15
-15
+15
-15
+15
+15
-15
+15
+15
-15
+15
-15
+15
LOW
LOW
LOW
LOW
LOW
LOW
LOW
LOW
LOW
LOW
CHANNEL 14 15
/
0
0
0
0
0
0
0
0
0
0
0
−∞
−∞
−∞
−∞
−∞
−∞
−∞
−∞
L
R
BALANCE
−∞
+10
−∞
+10
+10
+10
+10
−∞
+10
+10
+10
+10
+10
+20
−∞
AUX
AUX
1
AUX
AUX
1
AUX
AUX
1
AUX
AUX
1
AUX
AUX
1
AUX
AUX
1
AUX
AUX
1
AUX
AUX
1
AUX
AUX
1
AUX
AUX
1
AUX
1
LEVEL
0
0
0
0
0
0
0
0
0
0
0
+10
+10
−∞
+10
−∞
+10
−∞
+10
+10
+10
+10
+10
+10
L
R
−∞
−∞
−∞
−∞
−∞
−∞
+20
LEVEL
−∞
AUX
2
2
2
2
2
2
2
2
2
2
2
BALANCE
MIDI KEYBOARD
L
R
L
R
L
R
L
R
L
R
L
R
L
R
L
R
L
R
L
R
0
10
PAN
0
PAN
0
PAN
0
PAN
0
PAN
0
BALANCE
BALANCE
BALANCE
BALANCE
BALANCE
HEADPHONE
LEVEL
PEAK
PEAK
PEAK
PEAK
PEAK
PEAK
PEAK
PEAK
PEAK
PEAK
0
0
0
0
0
0
+15
+15
−∞
−∞
+15
−∞
+15
−∞
+15
−∞
+15
−∞
+15
−∞
+15
−∞
+15
−∞
+15
−∞
+15
−∞
GAIN
GAIN
GAIN
GAIN
GAIN
GAIN
GAIN
GAIN
GAIN
GAIN
1
2
3
4
5
6
/
7
8
/
9
10 /11
12 /13
14 /15
MAIN
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Applications
Application 4 - Us ing The MPL 1502 For Re cording
You can also use the MPL 1502 for making simple recordings—for example, when recording a rehearsal or practice
session direct to open-reel two-track, cassette, or DAT recorder. Connect the MPL 1502 tape outputs to the inputs of the
two-track tape recorder, and connect the Main outputs to a power amplifier driving the control room speakers. The two
tape recorder outputs are then returned to the MPL 1502 tape inputs. Microphones and monophonic line level signals
requiring insert processing are connected to mono channel inputs and stereo line level signals are connected to stereo
channel inputs. Signal processors are connected to Aux send 2 (and either or both Aux returns) and to channel inserts as
required. A submix from Aux send 1 is connected to the input of a second power amplifier driving cue headphones so
that performers can receive a headphone mix independent of the main control room mix.
L
R
S
A
M
S
O
N
SERVO - 240
POWER
PHANTOM
1
2
3
4
5
6
/
7
8
/
9
10
/
11
12
/
13
14 15
/
TIP RING SLEEVE
AVIS:
ON
CAUTION
MIC INPUT (BALANCED -50dB TO +4dB)
MPL 1502
15 CHANNEL STEREO MIXER
RISQUE DE CHOC ELECTRIQUE
S A M S O N
TIP
RING
+
-
!
RISK OF ELECTRIC SHOCK
DO NOT OPEN
NE PAS OUVRIR
DO NOT EXPOSE THIS EQUIPMENT
TO RAIN OR MOISTURE
LEFT/MONO
LEFT/MONO
LEFT/MONO
LEFT/MONO
LEFT/MONO
OFF
SAMSON TECHNOLOGIES CORP., HICKSVILLE, NEW YORK
SLEEVE GND
2
1
2
1
2
1
2
1
2
1
48V
FUSE RATING
TAPE OUT
(600Ω +4dΒ)
3
3
3
3
3
1
RIGHT
LEFT/MONO
RIGHT LEFT/MONO
5
4
3
2
1
RIGHT
LEFT
2
S A M S O N
0.3A/250V(115V)
0.15A/250V(230V)
L
VOLTAGE SELECTOR
LINE INPUT (BALANCED 10KΩ -30dB TO +4dB)
15 CHANNEL
STEREO MIXER
MPL 1502
2
1
115V
230V
R
SERIAL NUMBER
MAIN OUT
(BALANCED 600
AUX SEND
+4dB) (UNBALANCED 2KΩ +4dB)
AUX RETURN
(UNBALANCED 2KΩ +4dB)
CHANNEL INSERT
-
TIP RETURN RING SEND
-
Ω
LINE INPUT (BALANCED 10KΩ -40dB TO +4dB
RIGHT
RIGHT
10
RIGHT
10
RIGHT
10
RIGHT
TAPE IN
(10KΩ -10dB)
~115/230V,50/60Hz 23W
10
10
10
10
10
10
10
MPL 1502
ASSEMBLED IN R.O.K.
0
0
+4
0
0
0
0
+4
0
0
0
0
15 CHANNEL STEREO MIXER
+4
-30
+4
-30
+4
-30
+4
-30
+4
-30
-30
+4
-30
+4
-30
+4
-30
-30
TRIM
0
TRIM
0
TRIM
0
TRIM
0
TRIM
0
TRIM
0
TRIM
0
TRIM
0
TRIM
0
TRIM
0
Ring
SIGNAL PROCESSOR
Tip
-20 -10 -6 -2
-20 -10 -6 -2
0
0
+2 +6
+2 +6
-15
+15
-15
+15
-15
+15
-15
+15
-15
+15
-15
+15
-15
+15
-15
+15
-15
+15
-15
+15
LEFT
HIGH
0
HIGH
0
HIGH
0
HIGH
0
HIGH
0
HIGH
0
HIGH
0
HIGH
0
HIGH
0
HIGH
0
RIGHT
S
A
M
S
O
N
+15db
+15db
PHANTOM
POWER
0
0
-15db
+15db
-15db
+15db
-15
-15
+15
-15
-15
+15
-15
-15
+15
+15
-15
+15
-15
+15
-15
+15
-15
-15
+15
-15
+15
-15
+15
-15
+15
MID
0
MID
0
MID
0
MID
0
MID
0
MID
0
MID
0
MID
0
MID
0
MID
0
0
0
TAPE IN
OFF
-15db
-15db
ON
+15
-15
+15
-15
+15
-15
+15
+15
-15
+15
+15
-15
+15
-15
+15
LOW
LOW
LOW
LOW
LOW
LOW
LOW
LOW
LOW
LOW
CHANNEL 14 15
/
R L
0
0
0
0
0
0
0
0
0
0
0
−∞
−∞
−∞
−∞
−∞
−∞
−∞
−∞
L
R
BALANCE
SIGNAL PROCESSOR
−∞
+10
−∞
+10
+10
+10
+10
−∞
+10
+10
+10
+10
+10
+20
LEVEL
−∞
AUX
AUX
1
AUX
AUX
1
AUX
AUX
1
AUX
AUX
1
AUX
AUX
1
AUX
AUX
1
AUX
AUX
1
AUX
AUX
1
AUX
AUX
1
AUX
AUX
1
AUX
1
0
0
0
0
0
0
0
0
0
0
0
+10
+10
−∞
+10
−∞
+10
−∞
+10
+10
+10
+10
+10
+10
L
R
−∞
−∞
−∞
−∞
−∞
−∞
+20
LEVEL
−∞
AUX
2
2
2
2
2
2
2
2
2
2
2
BALANCE
L
R
R
L
R
L
R
L
R
L
R
L
R
L
R
L
R
L
R
L
R
L
R
0
10
PAN
0
PAN
0
PAN
0
PAN
0
PAN
0
BALANCE
BALANCE
BALANCE
BALANCE
BALANCE
L
HEADPHONE
LEVEL
PEAK
PEAK
PEAK
PEAK
PEAK
PEAK
PEAK
PEAK
PEAK
PEAK
0
0
0
0
0
0
CASSETTE or DAT
+15
+15
−∞
−∞
+15
−∞
+15
−∞
+15
−∞
+15
−∞
+15
−∞
+15
−∞
+15
−∞
+15
−∞
+15
−∞
GAIN
GAIN
GAIN
GAIN
GAIN
GAIN
GAIN
GAIN
GAIN
GAIN
1
2
3
4
5
6
/
7
8
/
9
10 /11
12 /13
14 /15
MAIN
R
L
R
L
MIDI TONE GENERATOR
HEADPHONE AMP
DRUM MACHINE
MIDI KEYBOARD
R
L
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Spe cifications
1. Frequency Response (0 dB = 1.0 V RMS)
17 Hz to 30 kHz ± 1.5 dB at +4 dB
2. Equivalent Input Noise
Ch. 1 - Ch. 5 Mic input
-128 dB (A filter, 150 Ω shorted)
-131 dB (A filter, input shorted)
Ch. 1 - Ch. 15 Line input
3. THD+N (unity gain, 20 Hz - 20 kHz)
Less than 0.03 %
4. Input Level
Ch. 1 - Ch. 5 Mic input
Ch. 1 - Ch. 15 Line input
-50 dBV to +4 dB (10 kΩ, balanced XLR)
-40 dBV to +14 dB
(10 kΩ, balanced stereo phone jack)
+4 dB (47 kΩ, unbalanced phone jack)
Aux return 1 - 2
5. Maximum Input Level
Ch. 1 - Ch. 5 Mic input
Ch. 1 - Ch. 15 Line input
+17 dB
+27 dB
6. Trim gain range
0 dB to +54 dB
+15 dB to -80 dB
+10 dB to -75 dB
7. Channel fader range
8. Aux send gain range
9. Crosstalk
Ch-to-Ch (1 kHz)
Stereo Ch L/R (1 kHz)
-80 dB
-65 dB
10. Standard Output Level
Main Out
+4 dBV (balanced, 600 Ω loaded)
+4 dBV (unbalanced, 2.2 kΩ loaded)
150 mW (30 Ω loaded)
Aux Out
Headphones
11. Maximum Output
Main Out
+22 dBV (balanced, 600 Ω loaded)
+22 dBV (unbalanced, 2.2 kΩ loaded)
+22 dBV (unbalanced, 600 Ω loaded)
Aux Out
Tape Out
12. Tone Control
High
Mid
Low
10 kHz ± 15 dB
800 Hz ± 12 dB
80 Hz ± 15 dB
13. Dimensions
14. Weight
13.8 in (w) x 10.4 (d) x 3.2 (h)
350 mm (w) x 264 (d) x 82 (h)
7.7 lbs • 3.5 kg
26
Download from Www.Somanuals.com. All Manuals Search And Download.
|