Integrated Fridge-Freezer
50:50
User Guide
&
Installation & Service Instructions
Please keeP For Future reFerence
U110121 - 01A
Download from Www.Somanuals.com. All Manuals Search And Download.
1. Before You start
Thank you for buying a Rangemaster appliance. We hope
that it provides a stylish yet practical solution to your cooling
needs. We hope that this handbook supplies you with all
the information you require. If there is anything you are not
sure of please contact us (see Warranty section for Consumer
Services details).
wires are a safety hazard. Make sure that all electrical
connections are sound.
•
•
•
•
Before undertaking any routine maintenance or minor
repairs, disconnect the appliance from the electrical
supply. This includes cleaning and changing light bulbs.
DO NOT touch cold surfaces of the appliance while it is
in use as this will cause hands to stick to them leading
to freezer burns.
WARNING: This appliance must be earthed.
nn
Please leave the appliance to stand for at least eight
nn
When moving the appliance take care not to damage
the leads, pipes or condenser unit. Should these parts
become damaged, contact a qualified service engineer.
hours. This will allow the cooling system to settle
following transportation.
Always make sure a qualified person installs this
Effervescent liquids (fizzy drinks) should never be
frozen. These liquids expand during freezing and
this may lead to the bottles/containers shattering or
exploding.
nn
appliance.
The freezer compartment is rated at 4 stars.
nn
This appliance is designed for domestic use only.
nn
•
•
•
Foods that are intended to be defrosted or cooked first,
such as breads or meats, must not be eaten in their
frozen state.
Using it for any other purpose could invalidate any
warranty or liability claim.
•
•
Before you plug the appliance into the mains, clean
the inside of the appliance using warm water and
bicarbonate of soda, then dry thoroughly.
If food looks or smells strange, do not attempt to eat it.
If in doubt throw it away. Spoiled food can be harmful to
your health.
Check that no parts of the appliance are damaged,
especially parts of the cooling system, pipes or leads. If
damage has occurred DO NOT install the appliance. You
should contact a qualified service engineer or return the
appliance to its place of purchase.
Never use sharp, metal implements to scrape ice off the
surface of this appliance. Only use implements, which
are fit for this purpose (such as plastic scrapers) and use
carefully to avoid damaging the lining of the appliance.
•
The cooling system contains refrigerant and oils, all of
which are harmful to health if leaked. Should leakage
occur, disconnect the appliance and ventilate the room
it is installed in. Take care to make sure that you do not
get any coolant near to, or in, your eyes.
Contact a service engineer or arrange to have the
appliance removed.
•
•
•
If the accessories inside the appliance have been
disturbed during transit, reposition them in accordance
with the instructions.
Make sure that the electrical supply to your plug socket
is correct for this appliance: the required information is
on the data badge of the appliance.
Once the appliance is installed, cleaned and dry, it is
ready to be plugged in and switched on.
DO NOT use the appliance under any circumstances.
electrical safety
safety
•
Connections to the mains supply should be in
accordance with local regulations.
The data badge is located inside the appliance
nn
(refrigeration compartment).
•
•
The appliance must be plugged into an earthed socket.
The plug MUST be accessible after the appliance has
been positioned.
WARNING: Keep this appliance clear of any
nn
obstruction.
•
The appliance is supplied with a standard three-pin
plug, of which the one for grounding should never be
removed.
DO NOT damage the refrigerant circuit. If it does
nn
become damaged, do not use the appliance. In case
of damage, contact Consumer Services, ventilate
the room where the appliance is located and avoid
flames.
•
•
Hold the plug, not the electrical cable, when
unplugging the appliance.
Make sure that the appliance does not trap the electric
cable.
WARNING: Do not use mechanical devices (such as
nn
hair dryers) to defrost this appliance.
•
•
Do not step on the cable.
•
When replacing old appliances, make sure that you
have disabled any locking mechanisms before disposal:
it may even be best to remove the appliance door
completely to prevent children from becoming trapped
inside the appliance.
Avoid damage to the electric cable when moving the
appliance.
Damaged electrical cable
If the electrical cable is damaged or worn, turn off the
appliance and consult an authorised agent for replacement.
•
The appliance must be connected to the power supply
safely. Loose connections, broken plugs and bare
1
Download from Www.Somanuals.com. All Manuals Search And Download.
refrigerant gas information
caring for the environment
IMPORTANT: This appliance is provided with refrigerant
gas, ISOBUTHANE (R600a). When moving the appliance
take care to ensure that it is not excessively struck or
shaken. Failure to do so could damage the appliance.
Disposing of your packaging
Your new refrigerator was protected by suitable packaging
while on its way to you. All of the materials used are
environmentally friendly for disposal and can be recycled.
Please make a contribution to protecting the environment by
disposing of the packaging appropriately.
Damage to the refrigerating circuit, with possible leaking of
refrigerating gas, could create a risk of explosion caused by
external sparks or flames.
Disposing of your old refrigerator
In the event of accidental leakage
Allow the material to evaporate ensuring that adequate
ventilation is provided.
This symbol on the product or its packaging
indicates that the product may not be treated as
household waste. Instead it should be handed
over your local community waste collection/
ArtNo.000-019
Do not bin logo
Behaviour of the gas
recycling centre.
This refrigerant gas is highly flammable so do not allow the
gas to come into contact with hot surfaces or naked flames.
Gas R600a is heavier than air: if released it forms a high
concentration at floor level where ventilation is poor.
Old appliances still have some residual value. An
environmentally friendly method of disposal will ensure that
valuable raw materials can be recovered and used again.
When an appliance has reached the end of its working life
unplug it from the mains. Cut off the mains cable and dispose
of it together with the plug.
First aid
Inhalation
Make the door unfit for use (by removing the seals) or remove
the door so that children cannot accidentally lock themselves
in.
Take the exposed person from the polluted area and carry
them to a warm, well ventilated place.
Long exposure can cause the onset of asphyxia and
possible loss of consciousness. If necessary, practice artificial
respiration, and in the most serious cases, administer oxygen
under close medical supervision.
Cycloisopenthane, a flammable substance not harmful to the
ozone, is used as an expander for the insulating foam.
When transporting the appliance, take care not to damage
the cooling circuit.
Skin contact
By ensuring this product is disposed of correctly, you will
help prevent potential negative consequences for the
environment and human health, which could otherwise be
caused.
It is unlikely that occasional contact with the skin is
dangerous. If this should happen thoroughly wash the
affected zone.
Liquid splashes and atomised liquid can cause freezing burns.
Wash the affected part with plenty of water and call a doctor
to treat any burns.
For more detailed information about recycling of this
product, please contact your local council, your household
waste disposal service or the shop where you purchased the
product.
Eye contact
Wash with plenty of water, with eyelids well open, and call a
specialist doctor as soon as possible.
In any event, should you inhale or come into contact with
R600a gas, we advise you to consult your own doctor.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
2. about Your Fridge-Freezer
Fig.2-1
Egg rack
Control panel
Light
Glass shelves
Door shelves
Bottle holder
Glass shelf
Crisper drawers
Freezer drawers
Ice tray
The fridge-freezer is shown in Fig.2-1 and has the following
features:
Foods that are likely to perish quickly should be placed
towards the rear of the appliance – where it is coolest.
•
•
•
•
•
•
•
•
•
•
•
Automatic fridge defrost
Adjustable thermostat
Egg rack
Bottle rack
4 door shelves
4 glass shelves
2 crisper drawers
3 freezer drawers
Ice cube tray
CFC free and frost free
Reversible doors
3
Download from Www.Somanuals.com. All Manuals Search And Download.
about the Fresh Food compartment
Fig.2-2
It is recommended to leave storage space between the
foods for good cold air circulation. The temperatures in the
refrigerator are slightly warmer near the top and colder near
the base.
5
ON
ALARM
1. shelves
The shelves may be placed in any of the guide slots within the
interior of the appliance. They are protected from sliding out.
1
To remove a shelf
2
3
When adjusting the height of a shelf, first remove
any food placed on the shelf.
nn
Lift the front of the shelf and carefully pull it out of the
grooves.
4
2. Defrost Water outlet
The interior of the refrigerator is cooled by the cooling plate
that is on the rear wall. Beneath this there is a channel and an
outlet for the defrost water.
It is important that this channel never becomes clogged (see
‘The defrost drain hole’ section for a detailed explanation of
how to keep the channel clear).
6
3. Bottle Holder
The bottle holder is intended for storing larger bottles (soft
drinks, water, etc.) inside the fridge.
The bottle holder maximum load is 10 kg.
WARNING: Always make sure that large bottles do
nn
not prevent the door from closing.
4. crisper Drawers and cover
The crisper drawers are in the bottom of your refrigerator and
there is a cover that goes over them.
The cover helps to prevent fruit and vegetables from drying
out prematurely.
5. upper Door shelves
The door liner holds various shelves, which are suitable for
storing eggs, cheese, butter and yogurt. They are also suitable
for smaller packages such as tubes, cans, etc.
6. Bottle shelf
The lower shelf should be used for storing reasonably sized
bottles.
IMPORTANT: DO NOT overload the shelves that sit in the
door, as this will drastically reduce their working life.
the light
The interior light comes on when the door is opened.
The performance of the light is not affected by any of the
appliances other settings.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
about the Freezer compartment
The freezer compartment consists of four drawers (Fig.2-3).
Fig.2-3
As with the refrigerator, certain areas of the freezer are better
for storage of certain foods.
Ice creams and water ices are best stored towards the rear of
the appliance where it is coldest.
Large/heavier portions of food, such as meats joints for
roasting are best stored in the drawers at the bottom of the
appliance, while less weighty items should be stored on the
shelves: this is to prevent damage to the appliance.
You should always make sure that food stored is suitable
for freezing and that you have stored it securely inside the
appliance.
Defrosting food for cooking
Should food become partially thawed, or defrosted it should
be consumed as soon as possible as the quality will be
affected by defrosting.
Always make sure that food is thoroughly defrosted
nn
before cooking and no ice crystals remain. This
is especially important for poultry, as this can be
extremely harmful to health.
Always follow the defrosting instructions on packaging when
defrosting ready meals: manufacturers’guidelines are always
best, as some frozen foods should be cooked from frozen.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Fig.2-4
B
D
ON
ALARM
A
C
A – Power on indicator neon (green)
B – Warning alarm neon (red)
C – Warning alarm off button
D – Fridge-freezer thermostat dial
Fridge-Freezer control Panel
Fig.2-5
Fig.2-6
Fig.2-7
The fridge-freezer control panel (Fig.2-4) is located inside the
fridge compartment at the top.
Power indicator neon (green)
This will light as soon as the appliance is connected to the
mains supply.
Warning alarm neon (red)
This neon will light if the warning alarm has been activated.
Fridge-Freezer settings
Adjusting the Fresh Food Temperature
The thermostat control knob is located on the right-hand side
of the control panel.
The thermostat automatically regulates the temperature
inside of the fridge-freezer, depending on what setting you
have turned the thermostat control knob to:
You should turn the thermostat dial clockwise.
If the arrow is positioned to the smaller dots, then you will get
a higher temperature inside the fridge and freezer sections
(Fig.2-5).
If the arrow is positioned to the larger dots, then you will get
a lower temperature inside the fridge and freezer sections
(Fig.2-6).
Ideally the arrow should be set to the midway position
(Fig.2-7).
•
The refrigerator can maintain a temperature of between
4-6°C.
•
The freezer section can cool down to –18°C and lower.
IMPORTANT: The ambient temperature of the room, the
temperature of the food and the amount of food that has
been placed in the appliance and how often the door is
opened, will all affect the temperature being maintained by
the appliance.
On the maximum setting, the fridge-freezer will work
harder to maintain a lower temperature. There is no need
to run the appliance on this setting for long periods and
you should return the thermostat knob to the midway
position.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT: DO NOT run the appliance with the
thermostat on higher settings in normal use otherwise the
defrost drain hole will freeze.
Fig.2-8
Freezing Fresh Food
To freeze the maximum quantity of fresh food specified, turn
the thermostat dial to its maximum position (Fig.2-8) a few
hours before intending freezing.
For smaller quantities of fresh food, turn the thermostat
dial to its maximum position for an hour before intending
freezing.
Fig.2-9
Fresh food should be packed into airtight containers or
packaging. This will help to make sure that the food does not
dry out or lose its flavour. It will also make sure that flavour
does not transfer from other foods.
ALARM
DO NOT allow fresh food to touch items that are already
frozen.
After 24 hours, check that the fresh food is satisfactorily
frozen. If so, turn the thermostat dial back to its normal
operating position.
Warning alarm
Your appliance is equipped with sensors in the fridge and
freezer sections which assess the temperature.
Fig.2-10
ALARM
If the recorded temperature in either section goes above the
temperature set on the thermostat dial, the Warning Alarm
neon will light (Fig.2-9).
There will also be an audible warning signal to make you
aware that the sensors have sensed a temperature rise.
The warning alarm neon will stay switched on until the
recorded temperature has fallen to the level set on the
thermostat dial.
To silence the audible alarm, press the Warning Alarm off
button (Fig.2-10).
Note: The warning alarm neon will switch on if either of
the doors have been open for a period of time or if the
thermostat dial has been turned clockwise to a colder setting.
If the Warning Alarm neon stays lit for a prolonged period,
then please contact Consumer Services.
During First use
Set the thermostat dial to its maximum setting for 24 hours
after switching on the appliance for the first time.
When you first switch on the appliance, the compressor will
run continuously for approximately 24 hours or until the
fridge freezer reaches a cool enough temperature.
During this time, try not to open the door frequently or place
a large amount of food within the appliance.
You should then adjust the thermostat dial down to its
normal operating position.
If the unit is switched off or unplugged, you must allow
at least 5 minutes before restarting the appliance on the
thermostat or connecting it to your mains supply.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Food storage tips
tips on storing Fresh Food
•
•
Melon, pineapples and bananas can go directly into the
freezer after preparing, for storage over a longer period.
•
Make sure that foods, which have been cooked and
require chilling, are at room temperature before placing
them into the appliance. Make sure that these foods are
stored in suitable containers.
Packaging fresh foods properly, using the correct
temperature and taking into account food hygiene will
enhance the quality of fresh foods stored within this
appliance.
•
•
Foods stored in the refrigerator should be cleaned and
dried before storing.
•
•
Use plastic bags, aluminium foil or other food wraps to
cover fresh foods not in packaging to prevent flavour
transfer and prevent contamination.
Before foods are put into the refrigerator, it is
recommended that the foods should be pressurised,
so that the water cannot vaporise, and the fruits and
vegetables keep fresh and food smells will not mix.
Before storing items in multi-packs (i.e. yoghurt) remove
any excess packaging.
•
•
Stored foods can be marked in bags.
Foods eaten daily should be stored at the front of the
shelf.
NEVER store anything that is flammable, volatile or
explosive inside the appliance.
nn
•
Make sure that foodstuffs are stored systematically (raw
meats with raw meats, dairy with dairy) to avoid flavour
transfer and cross contamination. Raw meats should be
stored towards the bottom of the appliance to prevent
the possibility of it dripping onto uncooked food. Other
foods should be stored above raw meat.
•
Delicate foods should be stored in the coolest part of
the appliance.
•
•
Try not to open the door too often.
Set the thermostat to make sure that foods remain
suitably cold; try to avoid freezing within the fridge.
Using a thermometer will help you to judge how cool
the appliance is. Place it into a glass of water and leave
it inside the appliance for several hours to get a reliable
reading.
•
When storing food in the fresh food section always
make sure there is adequate space for airflow
circulation. This helps to maintain the shelf life of the
food.
•
•
Some foods contain natural oils and acids (e.g. citric
acid) which can damage plastics if spilled: make sure
these foods are suitably contained.
•
•
•
•
When storing food in the refrigerator make sure that
foods are not too close to the rear wall to avoid the risk
of freezing.
Unpleasant odours inside the fridge are a sign that
something has spilled and cleaning is required. Using
warm water with bicarbonate of soda will clean the
interior of the appliance and remove most spillages (see
‘Cleaning and Maintenance’).
It is suggested for radishes and other root vegetables to
trim the leaves. This keeps the nutrition in the root and
not absorbed by the leaves.
Put frozen foods into the fresh food area to let them
defrost. The low temperature of the refrigerator reduces
the formation of bacteria and extends food life.
•
Always remember to remove perishable foods from this
appliance before taking prolonged trips or holidays.
Some foods like onions, garlic, bananas and root
vegetables are better stored at room temperature than
in the fridge.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
tips on Freezing Food
•
As with storing fresh foods, suitable packaging, correct
temperature and food hygiene will enhance the quality
of the food you are freezing.
•
When storing commercially frozen foods, please follow
these guidelines:
•
Always follow manufacturers’guidelines for the
length of time you should store food for. DO NOT
exceed these guidelines!
•
•
•
Avoid putting hot foods into the freezer. First let them
cool until they reach room temperature.
Make sure that all foods for freezing are of a high
quality, and suitable for freezing.
•
Try to keep the length of time between purchase
and storage as short as possible to preserve food
quality.
Use packaging material that is odourless and airproof
(such as plastic bags) to store food in so different foods
can be mixed without affecting the quality. Make sure
that it is airtight. Leaking packaging will dehydrate the
products and lead to loss of beneficial vitamins.
•
•
Buy frozen foods, which have been stored at a
temperature of –18°C or below.
Avoid buying food which has ice or frost on the
packaging. This indicates that the products might
have been partially defrosted and refrozen at
some point: temperature rises affect the quality of
food.
•
•
•
Keep the surface of the packaging dry: this keeps the
packs from freezing together.
Mark packages with the kind of food contained and the
date of storage.
•
•
Should there be a power cut, or the freezer /
refrigeration appliance fail for any length of time
you may need to remove food from the freezer
and store in a cold, hygienic place (i.e. garage or
out house area) until the power is restored, or the
appliance is repaired.
Food needs to be frozen quickly, so it is best to freeze
small portions whenever possible and make sure
that they are as cold as possible before storage. The
recommended maximum weight for each portion is
2.5kg.
To prevent undue temperature rises; you should
wrap the foods in layers of insulating material,
such as newspaper, to help to maintain their
temperature. It is also important that any food
affected by this situation should be either
•
Keep food which is fresh away from food which is
already frozen, if you need to freeze fresh food every
day, make sure that it is in small portions to prevent this.
•
•
DO NOT exceed the maximum load for freezing: which
is given as 11kg / 24 hours (see data badge for details).
consumed or cooked and refrozen (where suitable)
soon afterwards in order to prevent health risks.
Write the expiry date and food names on the outside of
the packaging so you can be assured of the food type
and when it is safe to eat.
•
Layers of newspaper can also be used to help keep
foods cold while you are defrosting the freezer
(see cleaning your appliance).
•
•
Take food from the freezer to defrost when needed.
Defrosted food cannot be refrozen unless it is cooked.
DO NOT put too much fresh food into the freezer
at once. This could go beyond the freezer’s cooling
capacity (see ‘Technical Data’).
9
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Installation
Positioning Your appliance
IMPORTANT: We recommend that two people install this
Fig.4-1
38 min
appliance.
596
choosing the right location
The appliance should be installed in a location where
the ambient temperature corresponds with the climate
classification as stated on the rating plate.
Your appliance may not function correctly if the ambient
temperature falls outside of the following ranges.
Climate
classification
Appropriate ambient
temperature
SN
N
+10 to +32°C
+16 to +32°C
Avoid exposing the appliance to direct sunlight and sources
of heat (such as radiators, heaters or cookers).
550
The door should be able to open completely and freely.
Locate the appliance so you can easily access the food that is
stored in it.
Make sure there is an electrical socket available which will be
accessible after your appliance is installed.
1780
Fig.4-1 shows the minimum opening requirements.
If this appliance is situated in a cold environment (such as
a shed, outhouse or garage) it will affect its performance.
You may find that the performance of the appliance is
not consistent and this may damage foods. A consistent
ambient temperature of 10 °C or above is recommended.
560
All dimensions in mm
10
Download from Www.Somanuals.com. All Manuals Search And Download.
reversing the Doors
Fig.4-2
The doors of your fridge-freezer can be set to open from the
left or the right. If you want the door to hinge on the left-
hand side and open from the right-hand side, then follow the
proecedure below.
This procedure MUST be completed before the
nn
furniture door is attached.
When reversing a door, keep any parts that you remove from
the appliance for later use.
Take care when unscrewing any of the hinges: hold
nn
the door to stop it from falling and causing damage.
Fig.4-3
Fig.4-4
Tools required:
•
•
•
Phillips screwdriver
Flat bladed screwdriver
Pliers
Procedure
1. Undo the screws in the top of the upper support bracket
and remove. Slide the support bracket forwards and
remove (Fig.4-2).
Fig.4-5
Fig.4-6
2. Using a suitable flat bladed screwdriver, carefully lever
off the hinge cover cap (Fig.4-3).
3. Undo the upper hinge fixing screws and remove the
hinge (Fig.4-4).
4. Remove the fridge door by lifting it up and away
from the middle hinge. To stop the door from being
damaged, place it on a cushioned surface.
5. Undo the middle hinge fixing screws and remove the
hinge (Fig.4-5).
Fig.4-8
6. Remove the freezer door by lifting it up and away from
the lower hinge. To stop the door from being damaged,
place it on a cushioned surface.
7. Undo the lower door hinge screws and remove the
hinge (Fig.4-6). Remove the pin from the hinge and fit
it into the left-hand hole (Fig.4-7). Refit the lower hinge
on the left-hand side.
Fig.4-7
Fig.4-9
Right-hand
hinge
IMPORTANT: The position of the hinge pin MUST be
changed from the right hole to the left hole.
Fig.4-10
8. Using a suitable flat screwdriver, carefully remove the
screw cap and remove the screw hole covers (Fig.4-8).
Retain the screw cap and screw hole covers for use on
the opposite side of the appliance.
Left-hand
hinge
9. Refit the freezer door.
10. Refit the middle door hinge onto the left-hand side. Fit
the screw cap and screw hole cover to the right-hand
middle hinge position.
Re-use the hinge pin
11. Take the upper hinge and remove the pin. Fit the pin to
the new left-hand hinge: this is in the fixing kit (Fig.4-9).
12. Refit the refrigerator door and install the new door
hinge bracket (Fig.4-10).
13. Refit the upper support bracket.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT: After you have completed reversing the door,
check that the door opens and shuts correctly without
fouling.
38 min
Fig.4-11
596
You should also check the appliance door seals. The seal
should not be creased or crushed; otherwise there will be a
gap between it and the inside of the door.
The seal must bond properly all the way around the door. If
the seal is not bonding to the appliance properly, then you
should either:
A. Use a warm damp cloth and adjust the seal until it
bonds to the appliance properly, all the way around the
door, or
550
B. Use a hair dryer on its lowest heat setting and lightly
heat the areas of the door seal that are not bonding
correctly. The heat will make the seal more pliable and
this will allow you to adjust the seal into the correct
position.
If required, use
1780
ꢀller shelves to ꢀll excess
cabinet space
IMPORTANT: DO NOT heat the door seal on anything but
the lowest heat setting or heat the seal for a long period
of time, otherwise you may damage the door seal, which
would NOT be repaired under the guarantee free of charge.
The appliance must be stood on a level floor. You can use the
levelling feet to take into account any minor unevenness in
the floor.
min 200 cm²
560
Fitting into a cabinet unit
Make sure the ꢀller shelves
do not block the ow of air
cabinet dimensions and ventilation
All dimensions in mm
requirements
The cabinet dimensions for the appliance are shown in
(Fig.4-11).
Min 200 cm²
Fig.4-12
IMPORTANT: The clearance height must be exactly
1780 mm. If necessary, use extra filler shelves to fill any
excess space in your cabinet.
The cabinet space MUST have a minimum of 200cm² free
airflow for ventilation (Fig.4-12). The appliance will not
function properly without ventilation.
Min 200 cm²
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing your fridge-freezer
Fig.4-13
1. Fit the appliance towards the left-hand side of the
housing unit, leaving a gap of approximately 5mm.
.600-0116 - BIFF - Adjusting the feet
2. This fridge-freezer has front adjustable feet, which can
be used to level the appliance.
Using a suitable spanner, adjust the feet. Turn the
spanner clockwise to raise the feet and counter-
clockwise to lower the feet (Fig.4-13).
The appliance should be flush with the underside of the
housing unit.
3. Fix the appliance to the top shelf of the housing unit.
This will help to keep the appliance vertically parallel
with the décor doors.
Fig.4-14
Fixing brackets
4. Adjust the appliance so that it measures 40mm
between the appliance front edge and the front edge
of the housing unit (Fig.4-14). Fix the appliance in
position.
5 mm gap
40 mm
5. Trim the side gasket to the appropriate size and insert it
into the 5mm gap on the left-hand side of the appliance
(Fig.4-15).
6. Remove the screw caps and the screw (Fig.4-16).
7. Fix the bracket supplied with the fixing kit into position
Fig.4-15
Fig.4-16
Fig.4-17
Fig.4-18
(Fig.4-17).
8. Fit the slider guides on the edge of the appliance doors
(there are 2 slider guides per door). Insert the sliders
into the slider guides.
9. Mark the distance from the front edge of the furniture
door to the edge of the slider. This measurement should
be approximately 20mm (Fig.4-18).
Side gasket
10. Fix the sliders into position; the screws must be fully
tightened.
11. Check that both furniture doors open and close
properly without fouling on the cabinet.
IMPORTANT: Make sure that the doors of the appliance
and the door seals are shutting properly against the body
of the fridge freezer.
Gasket
To check, close the door seal onto a thin strip of paper
(about 25–50 mm wide) and confirm that the seal grips the
paper.
Retaining
bracket
Cabinet door
20 mm
Slider
Slider guide
Appliance
door
13
Download from Www.Somanuals.com. All Manuals Search And Download.
electrical supply connection
Fig.4-19
Earth: to the
terminal marked E,
coloured Green/Yellow
Your refrigerator is intended as a permanent
nn
installation.
Connect the appliance to the electrical supply (220–240V ~
50Hz) with the plug and lead, which are fitted.
Connections to the mains supply should be in accordance
with local regulations.
Live: to the
terminal marked L,
coloured Brown
Neutral: to the
terminal marked N,
coloured Blue
WARNING: THIS APPLIANCE MUST BE EARTHED
nn
All external wiring must comply with the IEE Regulations
for the Electrical Equipment of Buildings. The appliance is
supplied with a 3-core cable 2m long. If a replacement cable
is fitted it must be 250V high temperature PVC (85°C), 1mm².
Should the plug not fit the socket in your home, it should be
removed and replaced with a suitable plug.
Note: If the plug is fitted is not suitable, it must be cut off and
disposed of properly. To avoid the risk of electrocution, the
plug must not be left where children might find it and plug it
into a supply socket.
Three pin plugs to BS1363 with a capacity of not less than
13A must be used and fitted with a 13 amp fuse ‘ASTA’
approved to BS1362.
You MUST refit the cover after replacing the fuse. If the cover
is lost, the plug MUST NOT be used until a replacement cover
has been obtained from your supplier. The colour of the
correct fuse carrier is that of the coloured insert in the base of
the fuse recess, or stated elsewhere on the plug. Always state
this colour when ordering a replacement fuse carrier.
IMPORTANT: The wires in the mains lead are coloured in
accordance with the following code (Fig.4-19):
Green and yellow:
Blue:
EARTH
NEUTRAL
LIVE
Brown:
14
Download from Www.Somanuals.com. All Manuals Search And Download.
5. c leaning and Maintenance
cleaning
Fig.5-1
Disconnect the appliance from the power supply
ON
ALARM
nn
before cleaning.
To maintain a high performance level, occasionally clean the
condenser coils at the back of the appliance.
Defrost the appliance regularly. A build up of thick ice
decreases the efficiency of the appliance. You should defrost
whenever the frost reaches 5 mm thickness.
To keep internal odours to a minimum it is best to periodically
clean the compartment.
Clean the interior using warm water and bicarbonate of soda
with a soft cloth. Make sure that the interior is then dried
carefully with a suitable cloth.
Drain hole
Defrost channel
DO NOT use harsh abrasives, or aggressive cleaners
nn
as these can damage the interior of the appliance.
Shelves and other accessories can be cleaned in the sink
using liquid dishwashing liquid and warm water. Make sure all
soap is rinsed off and all parts are dry before replacing them
inside the appliance. DO NOT clean them in a dishwasher.
Always keep the door seals clean. Clean the door gasket with
warm water or a neutral detergent that leaves no residue. A
tight-sealing door gasket is critical to the efficiency of your
appliance.
DO NOT spray or rinse the freezer with water or
nn
Fig.5-2
other liquids. This could harm the electrical parts.
Use a dry cloth when cleaning near the electrical
nn
parts.
DO NOT clean the appliance with a stiff or wire
nn
brush.
DO NOT use an organic solvent such as detergent,
nn
petrol, lacquer, thinners, acetone or acid.
To prevent your skin sticking to cold steel parts,
nn
make sure your hands are not wet when touching
the parts.
DO NOT use HOT water to clean the glass shelves, as
nn
they may break or crack.
the Defrost Drain Hole
Defrosting occurs automatically in the refrigerator
compartment during operation. The defrost water is
collected by the evaporating tray (Fig.5-1) and evaporates
automatically.
The drain hole (Fig.5-2) should be cleaned periodically with
the drain hole cleaner. This will prevent water from collecting
in the bottom of the refrigerator, instead of flowing down the
defrost drainage channel and drain hole.
IMPORTANT: Please note that the drain hole cleaner should
not be left in position permanently. Otherwise this may
prevent the defrost water from entering the drain hole.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
You can also pour a small amount of water down the drain
hole to clean the defrost drainage channel.
Disconnect the appliance from the mains supply.
Remove the drawers and leave the door to the freezer open.
You can place a bowl of warm water inside the freezer section
to speed up the defrost process.
You should be careful to make sure that food packages do
not touch the rear wall of the appliance, as this can interrupt
the automatic defrosting process and deflect water into the
base of your refrigerator.
Use a sponge to mop up the defrost water that will run into
the bottom of the freezer.
Use a solution of bicarbonate of soda and lukewarm water to
clean the evaporating tray.
IMPORTANT: You should place some old towels on the
flooring that is immediately in front of the appliance. In
case any defrost water comes out of the freezer section and
onto the floor.
IMPORTANT: It is normal to get some ice droplets forming
on the back wall of the appliance. The formation of ice
droplets does not indicate an appliance fault.
Once all the ice has melted, thoroughly dry the inside of the
freezer.
Defrosting
Your appliance is frost free, so you will not need to manually
defrost the freezer section.
IMPORTANT: If the inside of the freezer is not dry, then
there will be an immediate build-up of ice when the
appliance is switched back on.
However if, for example, the door is left open for a long
period of time or the door gasket is not sealing correctly, then
ice could build up in the freezer section. If this occurs, then
follow the steps below and perform a manual defrost.
With dry hands, reconnect the appliance to the mains supply.
Set the thermostat knob to its maximum setting for 24-hours,
before returning it to the normal setting.
DO NOT attempt to freeze fresh food inside the
nn
The day before you defrost, turn the thermostat dial to its
maximum setting. This will make sure that the food contained
in the freezer is frozen properly.
freezer until after the 24-hours.
DO NOT use sharp metal objects to remove the ice
nn
on the freezer, as this could cause damage to the
While defrosting the appliance, remove the food from the
freezer, wrap it in several layers of paper and store it in a cool
place. The temperature rise in foods will shorten its storage
life, so the food should be used within a relatively short time.
refrigerant system.
DO NOT use mechanical devices (such as hair dryers)
nn
to accelerate the defrosting process.
DO NOT place food back in the freezer once it has
nn
started to thaw.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
replacing the light Bulb
Fig.5-3
Disconnect the appliance from the power supply
nn
Bulb housing
before replacing the light bulb.
Light bulb
There is an interior light in the top of the refrigerator section.
Remove the bulb housing cover, by gently pulling the clip
away from its slot (Fig.5-3). Then slide the cover off, removing
the lugs on the cover from the bulb housing.
Change the present light bulb with a new one. The
replacement bulb should not have a greater rating than 15 W.
Replace the light cover and after waiting five minutes,
reconnect to the mains supply.
When not in use
If you are not using the appliance for an extended length
of time, it is recommended that you switch off the electrical
supply, empty any food out, clean the inside of the appliance
and leave the door ajar.
Bulb cover
This will save energy, and also prevent a build up of stale
odours inside.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
6. troubleshooting
IMPORTANT: If your fridge-freezer does not appear be operating properly, please refer to the checklist below before
contacting Consumer Services.
IMPORTANT: If your appliance appears not to be operating
correctly, then you should disconnect it from your mains
supply and then contact Consumer Services.
My fridge-freezer does not appear to be working /
there is no power to my appliance
•
•
Check that the plug is fully inserted into the power
socket.
DO NOT ATTEMPT TO REPAIR THE APPLIANCE
YOURSELF.
nn
Check that there is power to your mains supply (e.g.
that there has not been a power cut or that the fuse
has not blown).
Please note that if an engineer is asked to attend while
the product is under guarantee and finds that the
problem is not the result of an appliance fault, then you
may be liable for the cost of the call out charge.
•
•
Check that the thermostat inside the appliance has
not been turned to the OFF position.
The appliance must be accessible for the engineer
to perform any necessary repair. If your appliance is
installed in such a way that an engineer is concerned that
damage will be caused to the appliance or your kitchen,
then he will not complete a repair.
Check that your mains supply voltage, corresponds
to the voltage stated on the rating plate of your
appliance.
My fridge-freezer appears to be performing poorly
This includes situations where appliances have been tiled
in, sealed in with sealant or any installation other than
the one specified has been completed.
•
•
•
Check that the appliance is not overloaded and that
food has not been packed too tightly into it.
Please refer to the conditions of guarantee that appear on
the warranty card that you receive with the appliance.
The thermostat setting is too low: you should turn
the thermostat up higher.
Make sure that the door is closing properly and that
the door has not been opened for a long period in
error.
•
Make sure that there is sufficient ventilation for your
appliance.
My fridge-freezer is noisy
•
The refrigerant gas that circulates the pipework of
the appliance may make a slight noise, even if the
compressor is not running.
•
If the noise worsens or the appliance gets louder
than normal check that it is levelled off correctly, that
nothing is touching the rear of the freezer and that
nothing placed inside the appliance is rattling.
Ice has formed on the inner back wall of my fridge
•
Check that food has not been pushed too far back
inside the appliance, so that it is in contact with the
inner back wall.
IMPORTANT: It is normal to get some ice droplets
forming on the back wall of the appliance. The
formation of ice droplets does not indicate an
appliance fault.
There is water in the base of the fridge or leaking out of
the fridge
•
See ‘The Defrost Drain Hole‘ section in ‘Cleaning and
Maintenance’.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
7. Warranty/after sales service
If consultation or technical assistance is needed, please
provide the local authorised service agent with the purchase
invoice and the product code/serial number.
The product number/serial number is located inside the
refrigerator on the top left-hand side.
The 2 years free maintenance for the operation of the
appliance started from the date of purchase of this product.
Any cosmetic damage to the appliance must be reported
within 90 days of delivery.
For in-warranty service please call: 0845 6035312.
For general enquiries please call: 0870 7895107.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
•
DocNo.608-0005 - Technical data - BIFF
8. technical Data
INSTALLER: Please leave these instructions with the user.
DATA BADGE LOCATION: Front left-hand side of the freezer compartment.
COUNTRY OF DESTINATION: GB/IE
Dimensions
All dimensions in mm.
540
872
30
1773
810
544
ratings
220-240 V / 50 Hz
A
Electrical – voltage/frequency
Energy efficiency class on a scale of A (more efficient) to G (less efficient)
Climate class (SN = 10-32 °C, N = 16-32 °C, ST = 18-38 °C, T = 18-43 °C)
Freezer compartment star rating
Temperature range (from > to)
Gross capacity
SN-N
*/***
< –18 °C / 0-10 °C
262 litres
Fridge net capacity
158 litres
Freezer net capacity
91 litres
Freezer capacity / 24 hours
4.5 kg / 24 hours
334 kWh / year
0.92 kWh / 24 hours
45 dB(A)
Energy consumption / year
Energy consumption (EN153)
Max noise level
Maximum storage time by power failure
> 5 hours
20
Download from Www.Somanuals.com. All Manuals Search And Download.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
•
DocNo.000-0001 - Back cover Rangemaster
Clarence Street, Royal Leamington Spa,
Warwickshire, CV31 2AD, England.
Tel: +44 (0) 1926 457400 Fax: +44 (0) 1926 450526
E-mail: [email protected]
ANo.000-0003 E logo
Download from Www.Somanuals.com. All Manuals Search And Download.
|