®
Note that cylinder extends
past lock on both sides.
ENFORCER
Acce s s
Electric Deadbolt for Fail-Secure Applications
Model: SD-997A
Adds concealed deadbolt security
to most wood or hollow metal
doors, with the added convenience
of electrical operation.
Key
Lock
knob
Features:
Fail-secure operation (locks if power is lost).
Stainless steel bolt, 5/8” diameter, 5/8” throw.
Includes control wire which allows for releasing
without cutting unit’s power.
Door open/close monitor (NO/C/NC).
Magnetic switch senses door position for positive locking.
Solenoid attempts to lock several times and then shuts down if
door not closed properly to prevent solenoid from burning out.
Once door closed properly will automatically lock.
Adjustable door lock delay timer - (0, 3, 5, or 9 seconds).
1.5-Amp over-current protection.
Incorporates manual lock/unlock cylinder to
operate the SD-997A if power is lost (turn lock
knob from inside protected premises and/or
use key from outside protected premises).
Includes all necessary hardware.
SD-997B - Similar to SD-997A but for Fail Safe operation (also
Card reader
or keypad
Push
button
Connection
Diagram:
COM
N.C.
N.O.
does not include locking cylinder or second wire connector).
39/16” (90mm)
Sensor Magnet
Door lock
Dimensions:*
delay timer
Orange wire
Brown wire
Red wire
12VDC
only
*Note: Inches are closest
1/16” approximation.
1Amp
Green wire-door monitor, COM
Yellow wire- door monitor, N.C.
15/16” (24.5mm)
Blue wire -door monitor,N.O.
Purple wire - manual N.C.
77/8” (200mm)
{
For
SD-997A
only
Gray wire - manual COM
Black wire - manual N.O.
Specifications:
Bolt
Bolt
SD-997A
Fail-Secure
Standby: 320mA Standby: 360mA
Activated:880mA Activated: 900mA
SD-997B
Fail-Safe
5
/
3
8” (16mm) Throw
1” (25mm)
/
4”
Operation
37/8” (98mm)
21/4” (58mm)
(19mm)
Current Draw
SPDT, 500mA @ 12VDC
(N.O./C./N.C.)
Status Sensor
Operation Voltage
Adjustable Delay Timer
Weight (approx.)
12VDC
0, 3, 5, 9 sec.s 0, 2.5, 5, 9 sec.s
2lbs.,5oz. (1kg) 1lb.,13oz.(0.82kg.)
61/8” (156mm)
SD997A.pmd
The SECO-LARM policy is one of continual development. For that reason, SECO-LARM reserves the right to change prices and specifications without notice. SECO-LARM is not responsible for misprints.
SECO-LARM® U.S.A., In c., 16842 Millikan Avenue, Irvine, CA 92606 Tel: 1-800-662-0800 (Domestic U.S. & Canada)
Tel: 1-949-261-2999 (California & International) Fax: 1-949-261-7326 Email: info@seco-larm.com Website: www.seco-larm.com
Download from Www.Somanuals.com. All Manuals Search And Download.
|