27930/31
4. Remove the handset from the cradle and set aside.Turn the
base over and align the four slots on the bottom of the
base with the four hook-tabs on the mounting bracket.
DIGITAL SECURITY SYSTEM
TEMPORARY TONE
INTRODUCTION
CORDLESS PHONE BASICS
CALLER ID WITH CALL WAITING
40-Channel 2.4 GHz Caller ID with
CallWaiting CordlessTelephone
User's Guide
Your cordless phone uses a digital security system to
provide protection against false ringing, unauthorized
access, and charges to your phone line.
This feature enables pulse (rotary) service phone users to
access touch-tone services offered by banks, credit card
companies, etc., by pressing theTONE button to
temporarily make the phone touch-tone compatible.To get
information about your bank account, for example, you
would:
Your Caller ID phone stores and displays specific
information, provided by your local telephone company, to
subscribers of Caller ID or similar caller identification
services.You must subscribe to one of these services in
order to use this unit.
Provided you subscribe to Caller ID with Call Waiting
service from your phone company, you are able to see who
is calling when you hear the call waiting beep.The caller
identification information appears in the display after you
hear the tone.
VOLUME buttons
5. Insert the hook-tabs into the slots and push upwards
until the mounting bracket snaps securely into place.
CID
review
button
When you place the handset in the base, the unit verifies
its security code. After a power outage or battery
replacement, you should place the handset in the base for
about 20 seconds to reset the code.
TALK/
callback
button
6. Plug the telephone line cord into theTEL LINE jack on the
back of the base and the other end into a modular jack.
Your Caller ID phone enables you to:
•
Press the flash button to put the current person on hold
so that you can answer the incoming call.
FORMAT
7. Slip the mounting holes on the bracket over the wall
plate posts and firmly slide the unit down into place
(wall plate not included).
1. Call the bank’s information line.
button
redial/
delete
button
•
•
•
•
Identify callers before you answer the phone.
View the time and date of each incoming call.
Record up to 40 Caller ID messages sequentially.
Know who called while you were away.
2. Press theTONE button (*) after your call is answered.
k
c
a
INSTALLATION
llb
a
c
cancel
button
TALK
FORMAT
cancel
IMPORTANT: In order to use the Caller ID functions
with this unit, you must subscribe to either the
standard Name/Number Caller ID Service or Caller
ID with Call Waiting Service. To know who is calling
while you are on the phone, you must subscribe to
Caller ID with Call Waiting Service.
3. Follow the voice instructions to complete your
transaction.
CID
8. Place the handset in the cradle.
NOTE: If desired, gather the extra telephone line and
power supply cord together, fasten with a wire tie, and
store inside the wall mounting bracket.
DESKTOP INSTALLATION
NOTE : For desktop charging only, the handset is able
hold
RINGER
switch
4. Hang up when finished.The phone returns to Pulse
(rotary) service.
hold
button
3
6
DEF
1
2
ABC
JKL
To get the most from your new phone, we suggest that
you take a few minutes right now to read through this
user's guide.
4
GHI
MNO
to charge facing up or down.
5
TONE
button
7
PQRS
9WXYZ
NOTE : The phone is shipped in Tone Dialing Mode
from the manufacturer.
8TUV
PAUSE
button
HOLD
*TONE
#
PAUSE
IMPORTANT: In order to use this unit, you must
subscribe to either the standard Name/Number Caller
ID Service or Caller ID with Call Waiting Service. To
know who is calling while you are on the phone, you
must subscribe to Caller ID with Call Waiting Service.
O
OPER
g
r
a
m
o
r
p
Press the hold button to put a call on hold. HOLD shows in
the display, and the handset antenna indicator flashes.To
release a line on hold, press the hold button again or pick
up an extension phone.
c
h
h
s
a
n
fla
mute
mem
RECEIVING AND STORING CALLS
3
CAUTION: Use only the ATLINKS USA, Inc.
5-2501 power supply that came with this unit.
Using other power supplies may damage the unit.
flash/
2
When you receive a call, the information is transmitted by
the phone company to your Caller ID telephone between
the first and second ring.
program
button
chan
button
mute
button
mem
button
1
CANCEL
When the memory is full, a new call automatically replaces
the oldest call in memory. NEW appears in the display for
calls received that have not been reviewed.
IMPORTANT: Because cordless phones operate on
electricity, you should have at least one phone in your
home that isn’t cordless, in case the power in your
home goes out.
SET UP
Press the cancel button to cancel any command you
initiated. Press cancel to hang up after finishing a call.
There are five programmable menus available: Language,
Area Code, RingerTone, SetTone/Pulse, and Default Setting.
NOTE: Check with your local phone company
regarding name service availability.
RECEIVING A CALL
4
FINDING THE HANDSET
1. Check the display to see who is calling.
2. Press theTALK button.
CAUTION: When using telephone equipment,
there are basic safety instructions that should
always be followed. Refer to the IMPORTANT
SAFETY INSTRUCTIONS provided with this
product and save them for future reference.
LANGUAGE SETTING SELECTION
This feature helps to locate a misplaced handset.
1. Remove the battery compartment door on the handset,
insert the battery pack, plug the cord into the jack (inside
the compartment), and replace the compartment door.
1. Press the flash/program button until “1ENGLISH 2FRA
3ESP “ shows in the display. “1ENGLISH “ is the default
setting.
REVIEWING RECORDS
Press the PAGE button on the base.The handset beeps
continuously for about 2 minutes or until you press the
TALK button on the handset..
MAKING A CALL
To make a call, press theTALK button before you dial and
press it again to hang up.
As calls are received and stored, the display is updated to
let you know how many calls have been received.
CAUTION:
RISK OF ELECTRIC SHOCK
DO NOT OPEN
2. Set the RINGER switch (on the handset) to ON and place
the handset in the cradle on the base.
2. Use the CID review (up or down arrow) button or the
handset number pad to enter your selection.
NOTE: The ringer does not have to be on for this
feature to work.
•
Press the CID review down button to scroll through the
call records from the most recent to the oldest.
THE EXCLAMATION
POINT WITHIN THE
TRIANGLE IS A
WARNING SIGN
ALERTING YOU OF
IMPORTANT
THE LIGHTNING FLASH CAUTION: TO REDUCE THE RISK OF
AND ARROW HEAD
WITHIN THE TRIANGLE COVER (OR BACK). NO USER
ELECTRIC SHOCK, DO NOT REMOVE
IS A WARNING SIGN
ALERTING YOU OF
“DANGEROUS
SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE
PERSONNEL.
3. Plug the telephone line cord into theTEL LINE jack on
the back of the base and into a modular jack.
3. Press flash/program to store selection.You will hear a
confirmation tone.
REDIAL
INSTRUCTIONS
ACCOMPANYING THE
PRODUCT.
VOLTAGE” INSIDE THE
PRODUCT.
WARNING:TO PREVENT FIRE OR
ELECTRICAL SHOCK HAZARD, DO
NOT EXPOSETHIS PRODUCT TO
RAIN OR MOISTURE.
•
Press the CID review up button to scroll through the call
records from the oldest to the newest.
SEE MARKING ON BOTTOM / BACK OF PRODUCT
4. Plug the power supply into the power jack on the back of
the base and the other end into an electrical outlet.The
"charge" indicator comes, verifying the battery is
charging.
While the phone is on, press the redial/delete button to
redial the last number you dialed (up to 32 digits). If you
get a busy signal, and want to keep dialing the number,
just press redial/delete again (you don't have to turn the
phone off and back on).
RINGER SWITCH
AREA CODE SELECTION
The RINGER switch must be ON for the handset to ring
TRANSFERRING CID RECORDS TO
MEMORY
You may transfer a Caller ID record to your phone’s
memory.
during incoming calls.
1. Press the flash/program button until “SET AREA CODE - - -”
shows in the display. “- - -” is the default setting.
BEFORE YOU BEGIN
We bring good things to life.
Allow the phone to charge for 12 hours prior to first use.
If you don't properly charge the phone, battery
performance will be compromised.
VOLUME
2. Use the handset number pad to enter your three digit
area code.
PARTS CHECKLIST
FLASH
The VOLUME button controls the volume of the handset's
earpiece.
FCC REGISTRATION INFORMATION
Make sure your package includes the items shown here.
CAUTION: Use only the ATLINKS USA, Inc.
5-2501 power supply that came with this unit.
Using other power supplies may damage the unit.
3. Press flash/program to store selection.You will hear a
confirmation tone.
Use the flash/program button to activate custom calling
services such as call waiting or call transfer, which
are available through your local phone company.
NOTE: It is important that you format CID records
correctly before storing in memory. It is not possible to
re-format CID records stored in memory.
Your telephone equipment is registered with the Federal
Communications Commission and is in compliance with parts 15 and
68, FCC Rules and Regulations.
in use/vmwi
k
VOICE MESSAGING
callbac
1
Notification to the LocalTelephone Company
TALK
FORMAT
CID
indicator
de
let
e
RINGER TONE SELECTION
TIP: Don’t use the TALK button to activate custom
calling services such as call waiting, or you’ll hang up
the phone.
re
l
ce
d
ia
n
ca
l
in use/
vmwi
hold
On the bottom of this equipment is a label indicating, among other
information, the FCC Registration number and Ringer Equivalence
Number (REN) for the equipment.You must, upon request, provide
this information to your telephone company.
Belt clip
charge/
page
1
3
6
DEF
NOTE : The phone is shipped in Tone Dialing Mode
from the manufacturer.
Provided your phone company offers
voice messaging service and you
subscribe to it, the in use/vmwi
2
ABC
JKL
1. Use the CID review (up or down arrow) button to scroll
to the desired record.
4
GHI
MNO
5
PAGE
7
PQRS
9WXYZ
1. Press the flash/program button until “SET RINGER
TONE123” shows in the display. “1” is the default
setting.
8TUV
Mounting bracket
*TONE
#
P
AUSE
O
OPER
gra
m
r
o
in use/
vmwi
p
cha
n
flash
mute
charge/page
indicator
charge/
page
2. Press the mem button.
The REN is useful in determining the number of devices you may
connect to your telephone line and still have all of these devices
ring when your telephone number is called. In most (but not all)
areas, the sum of the RENs of all devices connected to one line
should not exceed 5. To be certain of the number of devices you may
connect to your line as determined by the REN, you should contact
your local telephone company.
indicator on the base flashes when the
phone is not in use to indicate there is
a message waiting. It stops flashing
after the message has been reviewed.
PAGE
Base
Handset
3. Press the desired memory location. Example, press the
number 1 key to store the record in memory location 1.
You will hear a confirmation tone.
2. Use the CID review (up or down arrow) button or the
handset number pad to scroll to 1, 2, or 3.
WALL MOUNT INSTALLATION
PAGE
button
IN USE INDICATOR
The phone is ON when the indicator on the handset
antenna is lit and the page/ in use indicator on the base is
lit.The antenna indicator and the in use indicator on the
base flashes when you receive a call.
3. Press flash/program to store selection.You will hear a
confirmation tone.
Telephone
line cord
AC power
supply
Handset battery
Notes
CALLER ID FEATURES
This unit receives and displays information transmitted by
your local phone company.This information can include
the phone number, date, and time; or the name, phone
number, date, and time.The unit can store up to 40 calls
for later review.
DELETING RECORDS
• This equipment may not be used on coin service provided by the
telephone company.
Use the redial/delete button to erase the record currently
shown in the display or all records.
TONE/PULSE DIALING SELECTION
1. Press the flash/program button until “SET TONE/PULSE
1TONE 2PULSE” shows in the display. “1TONE” is the
default setting.
MODULAR JACK REQUIREMENTS
• Party lines are subject to state tariffs, and therefore, you may not
be able to use your own telephone equipment if you are on a
party line. Check with your local telephone company.
4
CHANNEL BUTTON
You need an RJ11 type modular phone jack, which
is the most common type of phone jack and might
look like the one pictured here. If you don’t have a
modular jack, call your local phone company to
find out how to get one installed.
ck
lba
cal
3
6
T
ALK
FORMA
T
• Notice must be given to the telephone company upon
CID
de
le
te
DELETING THE CURRENT RECORD
While talking, you might need to manually change the
channel in order to get rid of static. Press and release the
chan button to advance to the next clear channel.
re
d
l
ia
ce
n
l
ca
permanent disconnection of your telephone from your line.
hold
1
3
6
DEF
1
2
ABC
JKL
2
Rights of theTelephone Company
4
GHI
MNO
1. Make sure the phone is OFF (not in talk mode).
5
5
7
PQRS
9WXYZ
8TUV
2. Use the CID review (up or down arrow) button or the
handset number pad to scroll to 1TONE or 2PULSE.
Should your equipment cause trouble on your line which may harm
the telephone network, the telephone company shall, where
practicable, notify you that temporary discontinuance of service may
be required. Where prior notice is not practicable and the
Number of calls
*TONE
#
PAUSE
Time
Date
O
OPER
o
g
ra
m
r
p
ch
an
flash
mute
mem
2. Use the CID review (up or down arrow) buttons to
display the desired Caller ID record.
7
2
3. Press flash/program to store selection.You will hear a
confirmation tone.
circumstances warrant such action, the telephone company may
temporarily discontinue service immediately. In case of such
temporary discontinuance, the telephone company must: (1) promptly
notify you of such temporary discontinuance; (2) afford you the
opportunity to correct the situation; and (3) inform you of your right to
bring a complaint to the Commission pursuant to procedures set forth
in Subpart E of Part 68, FCC Rules and Regulations.
The telephone company may make changes in its communications
facilities, equipment, operations or procedures where such action
is required in the operation of its business and not inconsistent
with FCC Rules and Regulations. If these changes are expected to
affect the use or performance of your telephone equipment, the
telephone company must give you adequate notice, in writing, to
allow you to maintain uninterrupted service.
INSTALLATION NOTE: Some cordless telephones
operate at frequencies that may cause interference to
nearby TVs microwave ovens, and VCRs. To minimize
or prevent such interference, the base of the cordless
telephone should not be placed near or on top of a
TV, microwave ovens, or VCR. If such interference
continues, move the cordless telephone farther away
from these appliances.
3. Press redial/delete.The display shows DELETE CALL ID?
Because it is necessary to charge the handset for 12 hours
prior to connecting the phone for use the first time, it is
better to leave the unit on a flat surface during initial
charge before attempting to hang it on the wall.
4. Press redial/delete again to erase the record and the
next Caller ID record shows in the display.You will hear
a confirmation tone.
DEFAULT SETTING SELECTION
1. Press the flash/program button until DEFAULT SETTING?
1YES 2NO shows in the display. “2NO” is the default
setting.
1. Remove the battery compartment door on the handset,
insert the battery pack, plug the cord into the jack (inside
the compartment), and replace the compartment door.
DELETING ALL RECORDS
Caller ID phone number
Caller ID name
1. Make sure the phone is OFF (not in talk mode).
2. Use the CID Review (up or down arrow) button or the
handset number pad to scroll to 1YES or 2NO.
2. Use the CID review (up or down arrow) buttons to
display any Caller ID record.
2. Set the RINGER switch (on the handset) to ON and place
the handset in the cradle on the base.
Certain other communications devices may also use the
2.4 GHz frequency for communication, and, if properly
set, these devices may interfere with each other and/or
your new telephone. If you are concerned with
interference, please refer to the owner’s manual for
these devices on how to properly set channels to avoid
interference. Typical devices that may use the 2.4 GHz
frequency for communication include wireless audio/
video senders, wireless computer networks, multi-
handset cordless telephone systems, and some long-
range cordless telephone systems.
3. Press flash/program to store selection.You will hear a
confirmation tone.
3. Press and hold redial/delete button until DELETE ALL?
shows in the display.
3. Plug the power supply into the power jack on the back of
the base and the other end into an electrical outlet.The
"charge" indicator comes, verifying the battery is charging.
HEARING AID COMPATIBILITY
This telephone system meets FCC standards for Hearing Aid
Compatibility.
4. Press redial/delete again to erase all records.You will
hear a confirmation tone.The display shows NO CALLS.
FCC NUMBER IS LOCATED ONTHE CABINET BOTTOM
REN NUMBER IS LOCATED ONTHE CABINET BOTTOM
Allow the phone to charge for 12 hours prior to first use.
If you don't properly charge the phone, battery
performance will be compromised.
ATLINKS USA, Inc.
10330 North Meridian Street
Indianapolis, IN 46290
© 2001 ATLINKS USA, Inc.
Trademark(s) ® Registered
Marca(s) ® Registrada(s)
Model 27930/31A
15727280 (Rev. 3 DOM E)
01-34
Printed in China
Download from Www.Somanuals.com. All Manuals Search And Download.
|