RCA Telephone 27930 31 User Guide

27930/31  
4. Remove the handset from the cradle and set aside.Turn the  
base over and align the four slots on the bottom of the  
base with the four hook-tabs on the mounting bracket.  
DIGITAL SECURITY SYSTEM  
TEMPORARY TONE  
INTRODUCTION  
CORDLESS PHONE BASICS  
CALLER ID WITH CALL WAITING  
40-Channel 2.4 GHz Caller ID with  
CallWaiting CordlessTelephone  
User's Guide  
Your cordless phone uses a digital security system to  
provide protection against false ringing, unauthorized  
access, and charges to your phone line.  
This feature enables pulse (rotary) service phone users to  
access touch-tone services offered by banks, credit card  
companies, etc., by pressing theTONE button to  
temporarily make the phone touch-tone compatible.To get  
information about your bank account, for example, you  
would:  
Your Caller ID phone stores and displays specific  
information, provided by your local telephone company, to  
subscribers of Caller ID or similar caller identification  
services.You must subscribe to one of these services in  
order to use this unit.  
Provided you subscribe to Caller ID with Call Waiting  
service from your phone company, you are able to see who  
is calling when you hear the call waiting beep.The caller  
identification information appears in the display after you  
hear the tone.  
VOLUME buttons  
5. Insert the hook-tabs into the slots and push upwards  
until the mounting bracket snaps securely into place.  
CID  
review  
button  
When you place the handset in the base, the unit verifies  
its security code. After a power outage or battery  
replacement, you should place the handset in the base for  
about 20 seconds to reset the code.  
TALK/  
callback  
button  
6. Plug the telephone line cord into theTEL LINE jack on the  
back of the base and the other end into a modular jack.  
Your Caller ID phone enables you to:  
Press the flash button to put the current person on hold  
so that you can answer the incoming call.  
FORMAT  
7. Slip the mounting holes on the bracket over the wall  
plate posts and firmly slide the unit down into place  
(wall plate not included).  
1. Call the banks information line.  
button  
redial/  
delete  
button  
Identify callers before you answer the phone.  
View the time and date of each incoming call.  
Record up to 40 Caller ID messages sequentially.  
Know who called while you were away.  
2. Press theTONE button (*) after your call is answered.  
k
c
a
INSTALLATION  
llb  
a
c
cancel  
button  
TALK  
FORMAT  
cancel  
IMPORTANT: In order to use the Caller ID functions  
with this unit, you must subscribe to either the  
standard Name/Number Caller ID Service or Caller  
ID with Call Waiting Service. To know who is calling  
while you are on the phone, you must subscribe to  
Caller ID with Call Waiting Service.  
3. Follow the voice instructions to complete your  
transaction.  
CID  
8. Place the handset in the cradle.  
NOTE: If desired, gather the extra telephone line and  
power supply cord together, fasten with a wire tie, and  
store inside the wall mounting bracket.  
DESKTOP INSTALLATION  
NOTE : For desktop charging only, the handset is able  
hold  
RINGER  
switch  
4. Hang up when finished.The phone returns to Pulse  
(rotary) service.  
hold  
button  
3
6
DEF  
1
2
ABC  
JKL  
To get the most from your new phone, we suggest that  
you take a few minutes right now to read through this  
user's guide.  
4
GHI  
MNO  
to charge facing up or down.  
5
TONE  
button  
7
PQRS  
9WXYZ  
NOTE : The phone is shipped in Tone Dialing Mode  
from the manufacturer.  
8TUV  
PAUSE  
button  
HOLD  
*TONE  
#
PAUSE  
IMPORTANT: In order to use this unit, you must  
subscribe to either the standard Name/Number Caller  
ID Service or Caller ID with Call Waiting Service. To  
know who is calling while you are on the phone, you  
must subscribe to Caller ID with Call Waiting Service.  
O
OPER  
g
r
a
m
o
r
p
Press the hold button to put a call on hold. HOLD shows in  
the display, and the handset antenna indicator flashes.To  
release a line on hold, press the hold button again or pick  
up an extension phone.  
c
h
h
s
a
n
fla  
mute  
mem  
RECEIVING AND STORING CALLS  
3
CAUTION: Use only the ATLINKS USA, Inc.  
5-2501 power supply that came with this unit.  
Using other power supplies may damage the unit.  
flash/  
2
When you receive a call, the information is transmitted by  
the phone company to your Caller ID telephone between  
the first and second ring.  
program  
button  
chan  
button  
mute  
button  
mem  
button  
1
CANCEL  
When the memory is full, a new call automatically replaces  
the oldest call in memory. NEW appears in the display for  
calls received that have not been reviewed.  
IMPORTANT: Because cordless phones operate on  
electricity, you should have at least one phone in your  
home that isn’t cordless, in case the power in your  
home goes out.  
SET UP  
Press the cancel button to cancel any command you  
initiated. Press cancel to hang up after finishing a call.  
There are five programmable menus available: Language,  
Area Code, RingerTone, SetTone/Pulse, and Default Setting.  
NOTE: Check with your local phone company  
regarding name service availability.  
RECEIVING A CALL  
4
FINDING THE HANDSET  
1. Check the display to see who is calling.  
2. Press theTALK button.  
CAUTION: When using telephone equipment,  
there are basic safety instructions that should  
always be followed. Refer to the IMPORTANT  
SAFETY INSTRUCTIONS provided with this  
product and save them for future reference.  
LANGUAGE SETTING SELECTION  
This feature helps to locate a misplaced handset.  
1. Remove the battery compartment door on the handset,  
insert the battery pack, plug the cord into the jack (inside  
the compartment), and replace the compartment door.  
1. Press the flash/program button until “1ENGLISH 2FRA  
3ESP “ shows in the display. “1ENGLISH “ is the default  
setting.  
REVIEWING RECORDS  
Press the PAGE button on the base.The handset beeps  
continuously for about 2 minutes or until you press the  
TALK button on the handset..  
MAKING A CALL  
To make a call, press theTALK button before you dial and  
press it again to hang up.  
As calls are received and stored, the display is updated to  
let you know how many calls have been received.  
CAUTION:  
RISK OF ELECTRIC SHOCK  
DO NOT OPEN  
2. Set the RINGER switch (on the handset) to ON and place  
the handset in the cradle on the base.  
2. Use the CID review (up or down arrow) button or the  
handset number pad to enter your selection.  
NOTE: The ringer does not have to be on for this  
feature to work.  
Press the CID review down button to scroll through the  
call records from the most recent to the oldest.  
THE EXCLAMATION  
POINT WITHIN THE  
TRIANGLE IS A  
WARNING SIGN  
ALERTING YOU OF  
IMPORTANT  
THE LIGHTNING FLASH CAUTION: TO REDUCE THE RISK OF  
AND ARROW HEAD  
WITHIN THE TRIANGLE COVER (OR BACK). NO USER  
ELECTRIC SHOCK, DO NOT REMOVE  
IS A WARNING SIGN  
ALERTING YOU OF  
“DANGEROUS  
SERVICEABLE PARTS INSIDE. REFER  
SERVICING TO QUALIFIED SERVICE  
PERSONNEL.  
3. Plug the telephone line cord into theTEL LINE jack on  
the back of the base and into a modular jack.  
3. Press flash/program to store selection.You will hear a  
confirmation tone.  
REDIAL  
INSTRUCTIONS  
ACCOMPANYING THE  
PRODUCT.  
VOLTAGE” INSIDE THE  
PRODUCT.  
WARNING:TO PREVENT FIRE OR  
ELECTRICAL SHOCK HAZARD, DO  
NOT EXPOSETHIS PRODUCT TO  
RAIN OR MOISTURE.  
Press the CID review up button to scroll through the call  
records from the oldest to the newest.  
SEE MARKING ON BOTTOM / BACK OF PRODUCT  
4. Plug the power supply into the power jack on the back of  
the base and the other end into an electrical outlet.The  
"charge" indicator comes, verifying the battery is  
charging.  
While the phone is on, press the redial/delete button to  
redial the last number you dialed (up to 32 digits). If you  
get a busy signal, and want to keep dialing the number,  
just press redial/delete again (you don't have to turn the  
phone off and back on).  
RINGER SWITCH  
AREA CODE SELECTION  
The RINGER switch must be ON for the handset to ring  
TRANSFERRING CID RECORDS TO  
MEMORY  
You may transfer a Caller ID record to your phone’s  
memory.  
during incoming calls.  
1. Press the flash/program button until “SET AREA CODE - - -”  
shows in the display. “- - -” is the default setting.  
BEFORE YOU BEGIN  
We bring good things to life.  
Allow the phone to charge for 12 hours prior to first use.  
If you don't properly charge the phone, battery  
performance will be compromised.  
VOLUME  
2. Use the handset number pad to enter your three digit  
area code.  
PARTS CHECKLIST  
FLASH  
The VOLUME button controls the volume of the handset's  
earpiece.  
FCC REGISTRATION INFORMATION  
Make sure your package includes the items shown here.  
CAUTION: Use only the ATLINKS USA, Inc.  
5-2501 power supply that came with this unit.  
Using other power supplies may damage the unit.  
3. Press flash/program to store selection.You will hear a  
confirmation tone.  
Use the flash/program button to activate custom calling  
services such as call waiting or call transfer, which  
are available through your local phone company.  
NOTE: It is important that you format CID records  
correctly before storing in memory. It is not possible to  
re-format CID records stored in memory.  
Your telephone equipment is registered with the Federal  
Communications Commission and is in compliance with parts 15 and  
68, FCC Rules and Regulations.  
in use/vmwi  
k
VOICE MESSAGING  
callbac  
1
Notification to the LocalTelephone Company  
TALK  
FORMAT  
CID  
indicator  
de  
let  
e
RINGER TONE SELECTION  
TIP: Don’t use the TALK button to activate custom  
calling services such as call waiting, or you’ll hang up  
the phone.  
re  
l
ce  
d
ia  
n
ca  
l
in use/  
vmwi  
hold  
On the bottom of this equipment is a label indicating, among other  
information, the FCC Registration number and Ringer Equivalence  
Number (REN) for the equipment.You must, upon request, provide  
this information to your telephone company.  
Belt clip  
charge/  
page  
1
3
6
DEF  
NOTE : The phone is shipped in Tone Dialing Mode  
from the manufacturer.  
Provided your phone company offers  
voice messaging service and you  
subscribe to it, the in use/vmwi  
2
ABC  
JKL  
1. Use the CID review (up or down arrow) button to scroll  
to the desired record.  
4
GHI  
MNO  
5
PAGE  
7
PQRS  
9WXYZ  
1. Press the flash/program button until “SET RINGER  
TONE123” shows in the display. “1” is the default  
setting.  
8TUV  
Mounting bracket  
*TONE  
#
P
AUSE  
O
OPER  
gra  
m
r
o
in use/  
vmwi  
p
cha  
n
flash  
mute  
charge/page  
indicator  
charge/  
page  
2. Press the mem button.  
The REN is useful in determining the number of devices you may  
connect to your telephone line and still have all of these devices  
ring when your telephone number is called. In most (but not all)  
areas, the sum of the RENs of all devices connected to one line  
should not exceed 5. To be certain of the number of devices you may  
connect to your line as determined by the REN, you should contact  
your local telephone company.  
indicator on the base flashes when the  
phone is not in use to indicate there is  
a message waiting. It stops flashing  
after the message has been reviewed.  
PAGE  
Base  
Handset  
3. Press the desired memory location. Example, press the  
number 1 key to store the record in memory location 1.  
You will hear a confirmation tone.  
2. Use the CID review (up or down arrow) button or the  
handset number pad to scroll to 1, 2, or 3.  
WALL MOUNT INSTALLATION  
PAGE  
button  
IN USE INDICATOR  
The phone is ON when the indicator on the handset  
antenna is lit and the page/ in use indicator on the base is  
lit.The antenna indicator and the in use indicator on the  
base flashes when you receive a call.  
3. Press flash/program to store selection.You will hear a  
confirmation tone.  
Telephone  
line cord  
AC power  
supply  
Handset battery  
Notes  
CALLER ID FEATURES  
This unit receives and displays information transmitted by  
your local phone company.This information can include  
the phone number, date, and time; or the name, phone  
number, date, and time.The unit can store up to 40 calls  
for later review.  
DELETING RECORDS  
• This equipment may not be used on coin service provided by the  
telephone company.  
Use the redial/delete button to erase the record currently  
shown in the display or all records.  
TONE/PULSE DIALING SELECTION  
1. Press the flash/program button until “SET TONE/PULSE  
1TONE 2PULSE” shows in the display. “1TONE” is the  
default setting.  
MODULAR JACK REQUIREMENTS  
• Party lines are subject to state tariffs, and therefore, you may not  
be able to use your own telephone equipment if you are on a  
party line. Check with your local telephone company.  
4
CHANNEL BUTTON  
You need an RJ11 type modular phone jack, which  
is the most common type of phone jack and might  
look like the one pictured here. If you don’t have a  
modular jack, call your local phone company to  
find out how to get one installed.  
ck  
lba  
cal  
3
6
T
ALK  
FORMA  
T
• Notice must be given to the telephone company upon  
CID  
de  
le  
te  
DELETING THE CURRENT RECORD  
While talking, you might need to manually change the  
channel in order to get rid of static. Press and release the  
chan button to advance to the next clear channel.  
re  
d
l
ia  
ce  
n
l
ca  
permanent disconnection of your telephone from your line.  
hold  
1
3
6
DEF  
1
2
ABC  
JKL  
2
Rights of theTelephone Company  
4
GHI  
MNO  
1. Make sure the phone is OFF (not in talk mode).  
5
5
7
PQRS  
9WXYZ  
8TUV  
2. Use the CID review (up or down arrow) button or the  
handset number pad to scroll to 1TONE or 2PULSE.  
Should your equipment cause trouble on your line which may harm  
the telephone network, the telephone company shall, where  
practicable, notify you that temporary discontinuance of service may  
be required. Where prior notice is not practicable and the  
Number of calls  
*TONE  
#
PAUSE  
Time  
Date  
O
OPER  
o
g
ra  
m
r
p
ch  
an  
flash  
mute  
mem  
2. Use the CID review (up or down arrow) buttons to  
display the desired Caller ID record.  
7
2
3. Press flash/program to store selection.You will hear a  
confirmation tone.  
circumstances warrant such action, the telephone company may  
temporarily discontinue service immediately. In case of such  
temporary discontinuance, the telephone company must: (1) promptly  
notify you of such temporary discontinuance; (2) afford you the  
opportunity to correct the situation; and (3) inform you of your right to  
bring a complaint to the Commission pursuant to procedures set forth  
in Subpart E of Part 68, FCC Rules and Regulations.  
The telephone company may make changes in its communications  
facilities, equipment, operations or procedures where such action  
is required in the operation of its business and not inconsistent  
with FCC Rules and Regulations. If these changes are expected to  
affect the use or performance of your telephone equipment, the  
telephone company must give you adequate notice, in writing, to  
allow you to maintain uninterrupted service.  
INSTALLATION NOTE: Some cordless telephones  
operate at frequencies that may cause interference to  
nearby TVs microwave ovens, and VCRs. To minimize  
or prevent such interference, the base of the cordless  
telephone should not be placed near or on top of a  
TV, microwave ovens, or VCR. If such interference  
continues, move the cordless telephone farther away  
from these appliances.  
3. Press redial/delete.The display shows DELETE CALL ID?  
Because it is necessary to charge the handset for 12 hours  
prior to connecting the phone for use the first time, it is  
better to leave the unit on a flat surface during initial  
charge before attempting to hang it on the wall.  
4. Press redial/delete again to erase the record and the  
next Caller ID record shows in the display.You will hear  
a confirmation tone.  
DEFAULT SETTING SELECTION  
1. Press the flash/program button until DEFAULT SETTING?  
1YES 2NO shows in the display. “2NO” is the default  
setting.  
1. Remove the battery compartment door on the handset,  
insert the battery pack, plug the cord into the jack (inside  
the compartment), and replace the compartment door.  
DELETING ALL RECORDS  
Caller ID phone number  
Caller ID name  
1. Make sure the phone is OFF (not in talk mode).  
2. Use the CID Review (up or down arrow) button or the  
handset number pad to scroll to 1YES or 2NO.  
2. Use the CID review (up or down arrow) buttons to  
display any Caller ID record.  
2. Set the RINGER switch (on the handset) to ON and place  
the handset in the cradle on the base.  
Certain other communications devices may also use the  
2.4 GHz frequency for communication, and, if properly  
set, these devices may interfere with each other and/or  
your new telephone. If you are concerned with  
interference, please refer to the owner’s manual for  
these devices on how to properly set channels to avoid  
interference. Typical devices that may use the 2.4 GHz  
frequency for communication include wireless audio/  
video senders, wireless computer networks, multi-  
handset cordless telephone systems, and some long-  
range cordless telephone systems.  
3. Press flash/program to store selection.You will hear a  
confirmation tone.  
3. Press and hold redial/delete button until DELETE ALL?  
shows in the display.  
3. Plug the power supply into the power jack on the back of  
the base and the other end into an electrical outlet.The  
"charge" indicator comes, verifying the battery is charging.  
HEARING AID COMPATIBILITY  
This telephone system meets FCC standards for Hearing Aid  
Compatibility.  
4. Press redial/delete again to erase all records.You will  
hear a confirmation tone.The display shows NO CALLS.  
FCC NUMBER IS LOCATED ONTHE CABINET BOTTOM  
REN NUMBER IS LOCATED ONTHE CABINET BOTTOM  
Allow the phone to charge for 12 hours prior to first use.  
If you don't properly charge the phone, battery  
performance will be compromised.  
ATLINKS USA, Inc.  
10330 North Meridian Street  
Indianapolis, IN 46290  
© 2001 ATLINKS USA, Inc.  
Trademark(s) ® Registered  
Marca(s) ® Registrada(s)  
Model 27930/31A  
15727280 (Rev. 3 DOM E)  
01-34  
Printed in China  
Download from Www.Somanuals.com. All Manuals Search And Download.  

PYLE Audio Speaker PK18SBA User Guide
RCA Universal Remote RCR311BIR User Guide
Reliable Carpet Cleaner i700A User Guide
ResMed Respiratory Product Disposable Masks and Circuits User Guide
Roland Stereo Amplifier CUBE 30 User Guide
Runco Home Theater Screen CX 40HD User Guide
Ryobi Laminate Trimmer TR30 User Guide
Sanyo Air Conditioner C3622 User Guide
Sanyo Car Stereo System FXCD 550 User Guide
Sanyo Projector SO WIN KF3AC User Guide