Quick Guide
For printer model:
GY412
PN: 9001246(B)
Read this Quick Guide before using this product.
Keep this document available for future reference.
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety Precautions
Safety Precautions
Please read the following information carefully before installing and using the printer.
Pictographic Symbols
This instruction manual and the printer labels use a variety of pictographic symbols to facilitate safe and
correct use of the printer and to prevent injury to others and property damage. The symbols and meanings for
them are given below. Be sure to understand these symbols well before reading the main text.
Example Pictographs
Ignoring the instructions marked
The
pictograph means “Caution is required.” A specific
by this symbol and erroneously
operating the printer could result
in death or serious injury.
warning symbol is contained inside this pictograph (The sym-
bol at left is for electric shock).
Warning
Caution
The
pictograph means “Should not be done.” What is spe-
cifically prohibited is contained in or near the pictograph (The
symbol at left means “Disassembly prohibited”).
Ignoring the instructions marked
by this symbol and erroneously
operating the printer could result
in injury or property damage.
The
pictograph means “Must be done.” What is specifically
to be done is contained in the pictograph (The symbol at left
means “Unplug the power cord from the outlet”).
Warning
Do not set on an unstable area
• Do not set on an unstable area,
such as a wobbly table or slanted
area or an area subject to strong
vibration. If the printer falls off or
topples over, it could injure some-
one.
Always ground the connections
• Always connect the printer’s
ground wire to a ground. Not
grounding the ground wire could
result in electric shock.
Do not use the printer when some-
thing is abnormal about it
• Continuing to use the printer in
the event something is abnormal
about it, such as smoke or
unusual smells coming from it,
could result in fire or electric
Do not place containers full of water
or other liquid on the printer
• Do not place flower vases, cups,
or other containers holding liquids,
such as water or chemicals, or
small metal objects near the
printer. If they are spilled and get
inside the printer, immediately turn
off the power switch, unplug the
power cord from the outlet, and
contact your SATO reseller or
technical support center. Using
the printer in this condition could
cause a fire or electric shock.
Do not put objects inside the printer
• Do not insert or drop in metal or
burnable objects inside the
printer’s openings (cable outlets,
etc.). If foreign objects do get
inside the printer, immediately turn
off the power switch, unplug the
power cord from the outlet, and
contact your SATO reseller or
technical support center. Using
the printer in this condition could
cause a fire or electric shock.
Do not use other than the specified
voltage
shock. Immediately turn off the
power switch, unplug the power
cord from the outlet, and contact
your SATO reseller or technical
support center for repairs. It is
dangerous for the customer to try
to repair it, so absolutely do not
attempt repairs on your own.
Do not disassemble the printer
• Do not disassemble or modify the
printer. Doing so could result in
fire or electric shock. Ask your
SATO reseller or technical support
center to conduct internal inspec-
tions, adjustments, and repairs.
Regarding the cutter
Handling of the power cord
• Do not damage, break, or modify
the power cord. Also, do not place
heavy objects on the power cord,
heat it, or pull it because doing so
could damage the power cord and
cause a fire or electric shock.
• If the power cord becomes dam-
aged (core is exposed, wires bro-
ken, etc.), contact your SATO
reseller or technical support cen-
ter. Using the power cord in this
condition could cause a fire or
electric shock.
• Do not modify, excessively bend,
twist, or pull the power cord. Using
the power cord in such a condition
could cause a fire or electric
shock.
• Do not touch the cutter with your
hands or do not put something
into the cutter. Doing so could
result in an injury.
When the printer has been dropped or
broken
Using the head cleaning fluid
• If the printer is dropped or broken,
immediately turn off the power
switch, unplug the power cord
from the outlet, and contact your
SATO reseller or technical support
center. Using the printer in this
condition could cause a fire or
electric shock.
•
Use of flame or heat around the head
cleaning fluid is prohibited. Absolutely
do not heat it or subject it to flames.
• Keep the fluid out of reach of children
to prevent them from accidentally
drinking it. If the fluid is drunk, imme-
diately consult with a physician.
•
Do not use other than the specified
voltage. Doing so could result in fire or
electric shock.
GY412 Quick Guide
Page i
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety Precautions
Caution
Do not place in areas with high
humidity
Power cord
Loading paper
• When loading roll paper, be
• Keep the power cord away from
hot devices. Getting the power
cord close to hot devices could
cause the cord’s covering to
melt and cause a fire or electri- When not using the printer for a long
cal shock.
• When unplugging the power
cord from the outlet, be sure to
hold it by the plug. Pulling it by
the cord could expose or break
the cord wires and cause a fire
or electric shock.
• The power cord set that comes
with the printer is especially
made for this printer. Do not use
it with any other electrical
devices.
• Do not place the printer in areas
with high humidity or where con-
densation forms. If condensa-
tion forms, immediately turn off
the power switch and do not use
the printer until it dries. Using
the printer while condensation is
on it could result in electric
shock.
careful not to get your fingers
pinched between the paper roll
and the supply unit.
time
• When not using the printer for a
long time, unplug the power
cord from the outlet to maintain
safety.
Carrying the Printer
During maintenance and cleaning
• When maintaining and cleaning
the printer, unplug the power
cord from the outlet to maintain
safety.
• When moving the printer,
always unplug the power cord
from the outlet and check to
make sure all external wires are
disconnected before moving it.
Moving the printer with the wires
still connected could damage
the cords or connecting wires
and result in a fire or electrical
shock.
Top cover
• Be careful not to get your fin-
gers pinched when opening or
closing the top cover. Also be
careful the top cover does not
slip off and drop.
• Do not carry the printer with
paper loaded in it. The paper
could fall out and cause an
injury.
Print head
• The print head is hot after print-
ing. Be careful not to get burned
when replacing paper or clean-
ing immediately after printing.
• Touching the edge of the print
head immediately after printing
could result in injury. Use cau-
tion when replacing the label or
when cleaning the print head.
You should not replace the print
head without having received
the proper training.
• When setting the printer on the
floor or a stand, make sure not
to get your fingers or hands
pinched under the printer feet.
Power supply
• Do not operate the power
switch or plug in/unplug the
power cord with wet hands.
Doing so could result in electric
shock.
Page ii
GY412 Quick Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety Precautions
Precautions for Installation and Handling
Printer operation can be affected by the printer environment.
Refer to the following instructions for installation and handling of the printer.
Select a Safe Location
Place the printer on a surface that is flat and level. Do not place the printer in a location subject to
water or oil.
If the surface is not flat and level, this may result in poor
print quality. This may also cause malfunction and
shorten the life span of the printer.
Do not place the printer in a location where it will be
splashed with water or oil. Water or oil in the printer
may cause a fire, electric shock, or malfunction.
Do not place the printer on a location that
produces vibration.
Avoid dust.
Dust build up may result in poor print quality. This
may cause not only malfunction but also shorten the
life span of the printer.
Do not carry the printer when the roll label is set.
Vibrating the printer may cause malfunction and
shorten the life span of the printer.
Keep out of direct sunlight.
Keep the printer out of high temperature and hu-
midity.
This printer has a built-in optical sensor. Exposure to
direct sunlight will make the sensor less responsive
and may cause the label to be sensed incorrectly.
Close the top cover when printing.
Avoid locations subject to extreme or rapid changes
in temperature or humidity.
Power Supply
This printer requires an AC power supply.
Provide a stable source of electricity to the
printer.
Be sure to connect the printer to an AC power supply
via the supplied AC adapter. Failure to do so may result
in malfunction.
Do not share the power outlets with other appliances
such as a heater and refrigerator requiring a
measurable amount of power. Also, avoid using the
power outlet near where such appliances are
plugged into. This may cause voltage reduction and
malfunction.
Connect the power cord to a grounded power
outlet.
Make sure that the printer is plugged into a grounded
power outlet.
GY412 Quick Guide
Page iii
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety Precautions
Page iv
GY412 Quick Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
About the Box ...................................................................................................................... 1-1
Names of Parts........................................................................................................... 1-2
Operator panel..................................................................................................................... 1-5
Turning On the Power ............................................................................................... 2-1
Turning Off the Power ............................................................................................... 2-2
Basic Specifications.................................................................................................. 3-1
SATO Group of Companies ...................................................................................... 4-1
SATO Group of Companies................................................................................................. 4-2
GY412 Quick Guide
Page 1
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
Page 2
GY412 Quick Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Section 1: Accessories and Names of Parts
ACCESSORIES
Make sure that you have received all of the following items in the package. If there are any accessories
missing, contact your SATO reseller or technical support center.
ABOUT THE BOX
Please retain both the box in which the printer was packed, and the cushioning material (cushions that hold
the printer in place). If you ever need to send in the printer for repair, repack it in this box.
GY412 Quick Guide
Page 1-1
Download from Www.Somanuals.com. All Manuals Search And Download.
Section 1: Accessories and Names of Parts
NAMES OF PARTS
Front side of the printer
Cover opening button
Operator panel
Consists of LCD for
displaying messages,
nine operation
buttons, and two
LEDs for indicating
printer status.
Top cover
Power ON/OFF switch
Turns power ON or OFF.
“ | ” is ON
Label discharge outlet
Discharges the printed
label.
“ ” is OFF.
Upper print head
Upper platen roller
Feed roller
Label length detection sensor
Lower print head
Lower platen roller
Page 1-2
GY412 Quick Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Section 1: Accessories and Names of Parts
Back side of the printer
Feed Roller
Label feed
entrance
Label guide lock
lever
LAN interface
Label guide
USB interface
RS-232C interface
SD card slot
GY412 Quick Guide
Page 1-3
Download from Www.Somanuals.com. All Manuals Search And Download.
Section 1: Accessories and Names of Parts
AC input connector
Connect the power
cord to the printer
here and plug its
opposite end into
the appropriate
power receptacle.
Page 1-4
GY412 Quick Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Section 1: Accessories and Names of Parts
OPERATOR PANEL
Icons, instructions, and error messages are displayed here.
STATUS LED
Display panel
ERROR LED
Green: The printer is in operation.
Red light turns on or
blinks when an error
has occurred.
Displays icons,
OFF: The printer operation is
instructions and error
paused.
messages.
ENTER button
Registers set
contents.
LINE button
Acts as the print
start/stop toggle button.
Acts as the data
transmission ON/OFF
toggle button.
Arrow buttons
Moves the cursor
and enters the
numeric value in
various modes.
FEED button
Feeds the label. Press once to
feed one blank label.
FUNCTION button
Returns to the mode
selection screen.
CANCEL button
Cancels print data.
Returns to the
When the label is not at the right
position after setting the label,
press the LINE button to go
offline, and then, press the
FEED button to automatically
adjust the label position
previous screen.
to its top of form position.
GY412 Quick Guide
Page 1-5
Download from Www.Somanuals.com. All Manuals Search And Download.
Section 1: Accessories and Names of Parts
This page is intentionally left blank.
Page 1-6
GY412 Quick Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Section 2: Turning On the Power
TURNING ON THE POWER
After installing the printer, connect the power cord as shown below.
CAUTION
•
•
The power cord set supplied with this printer is only for use with this printer. Do not use it for other electrical
products.
Do not operate the POWER button or plug in/unplug the power cord with wet hands or wet fingers. Doing
so could result in electric shock.
1. To connect the power cord to the printer, be sure to confirm the correct orientation of the plug. Plug the
power cord into the printer. Use your other hand to secure the printer when connecting the power cord.
2. A three-prong power cord is provided. If your power socket has three contacts, the third one is connected
to the ground for safety. If your power outlet has two slots, use a three-prong to two-prong adapter.
GY412 Quick Guide
Page 2-1
Download from Www.Somanuals.com. All Manuals Search And Download.
Section 2: Turning On the Power
3. Press the power switch to the direction of [ | ].
OFF
TURNING OFF THE POWER
CAUTION
•
Do not operate the POWER button or plug in/unplug the power cord with wet hands. Doing so could result
in electric shock.
1. Ensure that the printer is in offline mode before you turn off the power. If the printer is in online mode, press
the LINE button to go offline.
2. After an [OFFLINE] message is displayed on the LCD screen, press the power switch toward [ o ].
OFF
Page 2-2
GY412 Quick Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Section 3: Basic Specifications
BASIC SPECIFICATIONS
Model name
GY412
Printing method
Direct Thermal
Head density
(resolution)
305 dpi (12 dots/mm)
Printable area
4.09” wide x 11.81” pitch (104 mm wide x 300 mm pitch)
Unprintable area
Length direction:
Upper: 0.05” (1.5 mm) Lower: 0.05” (1.5 mm)
Width direction:
Left: 0.05” (1.5 mm) Right 0.05” (1.5 mm)
These measurements do not include backing paper.
Printing speed
3 to 10 inches per second (75 or 120 mm/second) (Setting value: 3, 4, 5, 6, 7, 8,
9, 10)
Some restriction may apply to the print speed, depending on the layout and the
label type.
Label type /label
shape
Fanfold label (Maximum folded height: 5.11”/130 mm). We recommend using
label manufactured or specified by SATO.
Label thickness
100 to 320 μm
0.003 to 0.012”
(0.1 to 0.32 mm)
GY412 Quick Guide
Page 3-1
Download from Www.Somanuals.com. All Manuals Search And Download.
Section 3: Basic Specifications
Model name
GY412
Label size
Label size
Continuous type
Pitch: 1.18 to 11.81 in./30 to 300 mm. (Backing paper 1.29 to 11.9 in./33 to 303
mm)
Width: 1.96 to 5.15 in./50 to 131 mm.(Backing paper 2.04 to 5.19 in./ 50 to 132
mm.)
22 to 107 mm (Backing paper 25 to 110 mm)
Tear-off type
Pitch:
1.18 to 11.81 in./30 to 300 mm.
(Backing paper 1.29 to 11.9 in./33 to 303 mm.
Width:
1.96 to 5.15 in. / 50 to 131 mm.
(Backing paper 2.04 to 5.19 in./ 50 to 132 mm.
Cutter type
Pitch:
1.18 to 11.81 in./ 30 to 300 mm.
(Backing paper 1.29 to 11.9 in./30 to 303 mm.)
Width:
1.96 to 5.15 in./50 to 131 mm.
(Backing paper 2.04 to 5.19 in./52 to 132 mm
Some restrictions may apply to the label size, depending on the print quantity,
label type, and usage environment.
Label issuing
mode
Continuous mode, Tear off mode, Cutter mode
Dimensions
8.38” (W) x 11.92”(D) x 11.06” (H)
213 (W) x 303 (D) x 281 (H) mm.
Weight
29.76 pounds; Approximately 13.5 kg
Power specifica-
tions
Input power voltage: AC 100V to 240V +/-10%
Power consumption
At peak: 140 W 140VA (at 30% print ratio)
During standby: 11 W 14VA
Environmental
conditions (tem-
perature and
humidity)
Operating environment: 32 to 104°F / 0 to 40°C
30 to 80% RH (However, no condensation)
(These ranges do not include labels and other supplies.)
Page 3-2
GY412 Quick Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Section 3: Basic Specifications
Model name
Interface
GY412
Select one of the following (The factory will provide the unit with the selected
interface.)
1. USB interface
2. LAN interface
3. RS-232C interface
4. SD card slot (1 slot)
Options
Cutter unit, SD card
Operation buttons LINE, FEED, ENTER, FUNCTION, CANCEL
Level adjustment
Print darkness adjustment, Print position adjustment, tear-off position adjust-
ment, Cut position adjustment
Label length
detection
I-mark sensor (Reflective type)
Gap sensor (Transmissive type)
Barcode
UPC-A/UPC-E, JAN/EAN, CODE39, CODE93, CODE128, GS1-128
(UCC/EAN-128), CODABAR (NW-7), ITF, Industrial 2 of 5, Matrix 2 of 5,
Customer Barcode, UPC Add-On Code, GS1 DataBar Omnidirectional, GS1
DataBar Truncated, GS1 DataBar Stacked, GS1 DataBar Stacked Omnidirec-
tional, GS1 DataBar Limited, GS1 DataBar Expanded, GS1 DataBar Expanded
Stacked.
GS1 DataBar is the new version of RSS.
2D code
QR code, Micro QR, PDF417, Micro PDF, MAXI code, GS1 DataMatrix
(ECC200)
Composite sym-
bol
EAN-13 Composite
EAN-8 Composite
UPC-A Composite
UPC-E Composite
GS1 DataBar Composite
GS1 DataBar Truncated Composite
GS1 DataBar Stacked Composite
GS1 DataBar Stacked Omni-Directional Composite
GS1 DataBar Limited Composite
GS1 DataBar Expanded Composite
GS1 DataBar Expanded Stacked Composite
GS1-128 Composite
GS1 DataBar is the new version of RSS.
GS1-128 is the new version of UCC/EAN128.
Standard installed fonts
GY412 Quick Guide
Page 3-3
Download from Www.Somanuals.com. All Manuals Search And Download.
Section 3: Basic Specifications
Model name
GY412
Bitmap font
X20 5x9 dots (alphanumeric, symbols, Katakana)
X21 17 x 17 dots (alphanumeric, symbols, Katakana)
X22 24 x 24 dots (alphanumeric, symbols, Katakana)
X23 48 x 48 dots (alphanumeric, symbols, Katakana)
X24 48 x 48 dots (alphanumeric, symbols, Katakana)
OCR-A
22 x 33 dots (alphanumeric and sym-
bols)
OCR-B
30 x 36 dots (alphanumeric and sym-
bols)
Kanji 16 x 16 dots (JIS level 1&2)
Gothic-pointed /Mincho type
Kanji 22 x 22 dots (JIS level 1&2)
Gothic-pointed /Mincho type
Kanji 24 x 24 dots (JIS level 1&2)
Gothic-pointed /Mincho type
Kanji 32 x 32 dots (JIS level 1&2)
Gothic-pointed /Mincho type
Kanji 40 x 40 dots (JIS level 1&2)
Gothic-pointed /Mincho type
Japanese (JIS X 208-compliant)
Simplified Chinese (2.6 MB)
Gothic type GB2312 24 x 24 dots
Korean (1.6 MB)
Gothic type KSX1001 16 x 16 dots
Mincho type KSX1001 24 x 24 dots
Rasterized font
Outline font
CG Times (alphanumeric and symbols)
CG Triumvirate (alphanumeric and symbols)
Kanji, Alphanumeric, symbols, Katakana
Printing direction
(Characters and
barcodes)
Characters: 0°, 90°, 180°, 270°
Barcodes: Parallel 1 (0°), Parallel 2 (180°), Serial 1 (90°), Serial 2 (270°)
Barcode ratio
1:2, 1:3, 2:5, User definable
Magnification
ratio
Characters: Vertical 1 to 12 times, horizontal 1 to 12 times
Barcode: 1 to 12 times
(Characters and
barcodes)
Page 3-4
GY412 Quick Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Section 3: Basic Specifications
Model name
GY412
Standard func-
tions
1. Status return function
2. Graphic function
3. Sequential number function
4. Form overlay function
5. Custom character registration function
6. Character adjustment function
7. Black/white inversion function
8. Ruled line function
9. Dump list function
10. Format registration function
11. Outline function
12. Outline modification function
13. Label skip function
14. Zero slash switching function
15. JIS/Shift JIS switching function
16. Auto loading function
17. Label saving function
18. Label discharge function
Self-diagnostic
function
1. Broken head element check
2. Paper end detection
3. Cover (head) open detection
4. Test print
5. Cutter error (When the cutter kit is installed)
Noise (EMC)
standard
FCC Class B
Notice regarding the registered trademarks and trademarks of other companies
QR Code is a registered trademark of DENSO WAVE INCORPORATED.
This product is manufactured under Patent No. 6, 784, 906.
SD logo is a trademark.
GY412 Quick Guide
Page 3-5
Download from Www.Somanuals.com. All Manuals Search And Download.
Section 3: Basic Specifications
This page is intentionally left blank.
Page 3-6
GY412 Quick Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
|
