Ryobi Power Screwdriver HP41LK User Guide

OPERATOR’S MANUAL  
4 v LITHIUM-ION ScREwdRIvER  
REvERSIBLE  
HP41L  
Your screwdriver has been engineered and manufactured to our high standard for dependability, ease of operation, and  
operator safety. When properly cared for, it will give you years of rugged, trouble-free performance.  
wARNING: To reduce the risk of injury, the user must read and understand the operator’s manual before using  
this product.  
Thank you for your purchase.  
SAvE THIS MANUAL FOR FUTURE REFERENcE  
Download from Www.Somanuals.com. All Manuals Search And Download.  
GENERAL SAFETy RULES  
Use safety equipment. Always wear eye protection.  
Safety equipment such as dust mask, non-skid safety  
shoes, hard hat, or hearing protection used for appropriate  
conditions will reduce personal injuries.  
wARNING!  
Read all instructions. Failure to follow all instructions  
listed below may result in electric shock, fire and/or  
serious injury. The term “power tool” in all of the warnings  
listed below refers to your mains-operated (corded)  
power tool or battery-operated (cordless) power tool.  
Avoid accidental starting. Ensure the switch is in the  
off-position before plugging in. Carrying power tools  
with your finger on the switch or plugging in power tools  
that have the switch on invites accidents.  
Remove any adjusting key or wrench before turning  
the power tool on. A wrench or a key left attached to  
a rotating part of the power tool may result in personal  
injury.  
do not overreach. keep proper footing and balance  
at all times. This enables better control of the power tool  
in unexpected situations.  
dress properly. do not wear loose clothing or jewelry.  
keep your hair, clothing and gloves away from moving  
parts. Loose clothes, jewelry or long hair can be caught  
in moving parts.  
If devices are provided for the connection of dust  
extraction and collection facilities, ensure these are  
connected and properly used. Use of these devices can  
reduce dust-related hazards.  
SAvE THESE INSTRUcTIONS  
wORk AREA SAFETy  
keep work area clean and well lit. Cluttered or dark  
areas invite accidents.  
do not operate power tools in explosive atmospheres,  
such as in the presence of flammable liquids, gases  
or dust. Power tools create sparks which may ignite the  
dust or fumes.  
keep children and bystanders away while operating a  
power tool. Distractions can cause you to lose control.  
ELEcTRIcAL SAFETy  
Power tool plugs must match the outlet. Never modify  
the plug in any way. do not use any adapter plugs with  
earthed (grounded) power tools. Unmodified plugs and  
matching outlets will reduce risk of electric shock.  
do not wear loose clothing or jewelry. contain long  
hair. Loose clothes, jewelry, or long hair can be drawn  
into air vents.  
Avoid body contact with earthed or grounded surfaces  
such as pipes, radiators, ranges and refrigerators.  
There is an increased risk of electric shock if your body  
is earthed or grounded.  
do not expose power tools to rain or wet conditions.  
Water entering a power tool will increase the risk of  
electric shock.  
do not use on a ladder or unstable support. Stable  
footing on a solid surface enables better control of the  
power tool in unexpected situations.  
POwER TOOL USE ANd cARE  
do not force the power tool. Use the correct power tool  
for your application. The correct power tool will do the job  
better and safer at the rate for which it was designed.  
do not abuse the cord. Never use the cord for carrying,  
pulling or unplugging the power tool. keep cord away  
from heat, oil, sharp edges or moving parts. Damaged  
or entangled cords increase the risk of electric shock.  
do not use the power tool if the switch does not turn  
it on and off. Any power tool that cannot be controlled  
with the switch is dangerous and must be repaired.  
disconnect the plug from the power source and/or  
the battery pack from the power tool before making  
any adjustments, changing accessories, or storing  
power tools. Such preventive safety measures reduce  
the risk of starting the power tool accidentally.  
Store idle power tools out of the reach of children and  
do not allow persons unfamiliar with the power tool  
or these instructions to operate the power tool. Power  
tools are dangerous in the hands of untrained users.  
Maintain power tools. check for misalignment or  
binding of moving parts, breakage of parts and any  
other condition that may affect the power tool’s  
operation. If damaged, have the power tool repaired  
before use. Many accidents are caused by poorly  
maintained power tools.  
when operating a power tool outdoors, use an  
extension cord suitable for outdoor use. Use of a  
cord suitable for outdoor use reduces the risk of electric  
shock.  
Use only with charger listed.  
MOdEL  
HP41L  
cHARGER  
7ꢀ0ꢀ17003  
PERSONAL SAFETy  
Stay alert, watch what you are doing and use common  
sense when operating a power tool. do not use a  
power tool while you are tired or under the influence of  
drugs, alcohol or medication. A moment of inattention  
while operating power tools may result in serious personal  
injury.  
keep cutting tools sharp and clean. Properly maintained  
cutting tools with sharp cutting edges are less likely to  
bind and are easier to control.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
GENERAL SAFETy RULES  
Use the power tool, accessories and tool bits etc., in  
connection from one terminal to another. Shorting the  
accordance with these instructions and in the manner  
intended for the particular type of power tool, taking  
into account the working conditions and the work  
to be performed. Use of the power tool for operations  
different from those intended could result in a hazardous  
situation.  
battery terminals together may cause burns or a fire.  
Under abusive conditions, liquid may be ejected from  
the battery, avoid contact. If contact accidentally  
occurs, flush with water. If liquid contacts eyes,  
additionally seek medical help. Liquid ejected from the  
battery may cause irritation or burns.  
BATTERy TOOL USE ANd cARE  
SERvIcE  
Ensure the switch is in the off position before inserting  
battery pack. Inserting the battery pack into power tools  
that have the switch on invites accidents.  
Have your power tool serviced by a qualified repair  
person using only identical replacement parts. This will  
ensure that the safety of the power tool is maintained.  
Recharge only with the charger specified by the  
manufacturer. A charger that is suitable for one type  
of battery pack may create a risk of fire when used with  
another battery pack.  
wARNING!  
To reduce the risk of injury, user must read instruction  
manual.  
Use power tools only with specifically designated  
battery packs. Use of any other battery packs may create  
a risk of injury and fire.  
when servicing a power tool, use only identical  
replacement parts. Follow instructions in the  
Maintenancesectionofthismanual.Useofunauthorized  
parts or failure to follow Maintenance instructions may  
create a risk of shock or injury.  
when battery pack is not in use, keep it away from  
other metal objects like paper clips, coins, keys, nails,  
screws, or other small metal objects that can make a  
SPEcIFIc SAFETy RULES  
Hold power tools by insulated gripping surfaces when  
performing an operation where the cutting tool may  
contact hidden wiring or its own cord. Contact with a  
“live” wire will also make exposed metal parts of the tool  
“live” and shock the operator.  
do not crush, drop or damage battery pack. do not  
use a battery pack or charger that has been dropped  
or received a sharp blow. A damaged battery is subject  
to explosion. Properly dispose of a dropped or damaged  
battery immediately.  
know your power tool. Read operator’s manual  
carefully. Learn its applications and limitations, as  
well as the specific potential hazards related to this  
power tool. Following this rule will reduce the risk of  
electric shock, fire, or serious injury.  
Batteries can explode in the presence of a source  
of ignition, such as a pilot light. To reduce the risk of  
serious personal injury, never use any cordless product  
in the presence of open flame. An exploded battery can  
propel debris and chemicals. If exposed, flush with water  
immediately.  
do not charge battery tool in a damp or wet location.  
Following this rule will reduce the risk of electric shock.  
For best results, your battery tool should be charged  
in a location where the temperature is more than  
50°F but less than 100°F. To reduce the risk of serious  
personal injury, do not store outside or in vehicles.  
Under extreme usage or temperature conditions,  
battery leakage may occur. If liquid comes in contact  
with your skin, wash immediately with soap and water,  
then neutralize with lemon juice or vinegar. If liquid  
gets into your eyes, flush them with clean water for  
at least 10 minutes, then seek immediate medical  
attention. Following this rule will reduce the risk of serious  
personal injury.  
Always wear safety glasses with side shields. Everyday  
glasses have only impact resistant lenses. They are NOT  
safety glasses. Following this rule will reduce the risk of  
eye injury.  
Protect your lungs. wear a face or dust mask if the  
operation is dusty. Following this rule will reduce the risk  
of serious personal injury.  
Protect your hearing. wear hearing protection during  
extended periods of operation. Following this rule will  
reduce the risk of serious personal injury.  
Battery tools do not have to be plugged into an  
electrical outlet; therefore, they are always in  
operating condition. Be aware of possible hazards  
when not using your battery tool or when changing  
accessories. Following this rule will reduce the risk of  
electric shock, fire, or serious personal injury.  
Ifthepowersupplycordisdamaged,itmustbereplaced  
only by the manufacturer or by an authorized service  
center to avoid risk.  
do not place battery tools or their batteries near fire  
or heat. This will reduce the risk of explosion and possibly  
injury.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
SAFETy RULES FOR cHARGER  
An extension cord should not be used unless  
absolutely necessary. Use of improper extension cord  
could result in a risk of fire and electric shock. If extension  
cord must be used, make sure:  
wARNING!  
REAd ANd UNdERSTANd ALL INSTRUcTIONS.  
Failure to follow all instructions listed below, may result in  
electric shock, fire and/or serious personal injury.  
a. That pins on plug of extension cord are the same  
number, size and shape as those of plug on charger.  
Before using battery charger, read all instructions and  
cautionary markings in this manual, on battery charger,  
battery, and product using battery to prevent misuse of  
the products and possible injury or damage.  
b. That extension cord is properly wired and in good  
electrical condition; and  
c. That wire size is large enough for AC ampere rating of  
charger as specified below:  
Cord Length (Feet)  
Cord Size (AWG)  
ꢀ5'  
16  
50'  
16  
100'  
16  
cAUTION:  
To reduce the risk of electric shock or damage to  
the charger and battery, charge only lithium-ion  
rechargeable batteries as specifically designated on your  
charger. Other types of batteries may burst, causing  
personal injury or damage.  
NOTE: AWG = American Wire Gauge  
do not operate charger with a damaged cord or  
plug, which could cause shorting and electric shock. If  
damaged, have the charger replaced by an authorized  
serviceman.  
do not use charger outdoors or expose to wet or damp  
conditions. Water entering charger will increase the risk  
of electric shock.  
do not operate charger if it has received a sharp blow,  
been dropped, or otherwise damaged in any way.  
Take it to an authorized serviceman for electrical check  
to determine if the charger is in good working order.  
Use of an attachment not recommended or sold by the  
battery charger manufacturer may result in a risk of  
fire, electric shock, or injury to persons. Following this  
rule will reduce the risk of electric shock, fire, or serious  
personal injury.  
do not disassemble charger. Take it to an authorized  
serviceman when service or repair is required. Incorrect  
reassembly may result in a risk of electric shock or fire.  
Unplug charger from outlet before attempting any  
maintenance or cleaning to reduce the risk of electric  
shock.  
do not abuse cord or charger. Never use the cord to  
carry the charger. Do not pull the charger cord rather than  
the plug when disconnecting from receptacle. Damage  
to the cord or charger could occur and create an electric  
shock hazard. Replace damaged cords immediately.  
disconnect charger from the power supply when  
not in use. This will reduce the risk of electric shock or  
damage to the charger if metal items should fall into the  
opening. It also will help prevent damage to the charger  
during a power surge.  
Make sure cord is located so that it will not be stepped  
on, tripped over, come in contact with sharp edges  
or moving parts or otherwise subjected to damage or  
stress. This will reduce the risk of accidental falls, which  
could cause injury, and damage to the cord, which could  
result in electric shock.  
Risk of electric shock. Do not touch uninsulated portion  
of output connector or uninsulated battery terminal.  
Save these instructions. Refer to them frequently and  
use them to instruct others who may use this tool. If you  
loan someone this tool, loan them these instructions also  
to prevent misuse of the product and possible injury.  
keep cord and charger from heat to prevent damage  
to housing or internal parts.  
do not let gasoline, oils, petroleum-based products,  
etc. come in contact with plastic parts. They contain  
chemicals that can damage, weaken, or destroy plastic.  
IMPORTANT SAFETy INSTRUcTIONS  
1. SAvE THESE INSTRUcTIONS  
This manual contains important safety and operating instructions for battery charger 7ꢀ0ꢀ17003.  
2. Before using battery charger, read all instructions and cautionary markings on battery charger, battery, and product  
using battery.  
3. cAUTION: To reduce the risk of injury, charge only lithium-ion rechargeable batteries. Other types of batteries may  
burst, causing personal injury or damage.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
SyMBOLS  
Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper  
interpretation of these symbols will allow you to operate the product better and safer.  
SyMBOL  
NAME  
dESIGNATION/EXPLANATION  
V
Volts  
Voltage  
Current  
A
Hz  
W
Amperes  
Hertz  
Frequency (cycles per second)  
Power  
Watt  
min  
Minutes  
Time  
Alternating Current  
Direct Current  
No Load Speed  
Class II Tool  
Type of current  
Type or a characteristic of current  
Rotational speed, at no load  
Double-insulated construction  
Revolutions, strokes, surface speed, orbits etc., per minute  
n
o
.../min  
Per Minute  
Wet Conditions Alert  
Do not expose to rain or use in damp locations.  
To reduce the risk of injury, user must read and understand  
operator’s manual before using this product.  
Read The Operator’s Manual  
Always wear safety goggles or safety glasses with side shields and,  
as necessary, a full face shield when operating this product.  
Eye Protection  
Safety Alert  
Precautions that involve your safety.  
Failure to keep your hands away from the blade will result in serious  
personal injury.  
No Hands Symbol  
Failure to keep your hands away from the blade will result in serious  
personal injury.  
No Hands Symbol  
No Hands Symbol  
No Hands Symbol  
Failure to keep your hands away from the blade will result in serious  
personal injury.  
Failure to keep your hands away from the blade will result in serious  
personal injury.  
To reduce the risk of injury or damage, avoid contact with any hot  
surface.  
Hot Surface  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
SyMBOLS  
The following signal words and meanings are intended to explain the levels of risk associated with this product.  
SyMBOL  
SIGNAL  
MEANING  
Indicates an imminently hazardous situation, which, if not avoided, will result  
in death or serious injury.  
dANGER:  
Indicates a potentially hazardous situation, which, if not avoided, could result  
in death or serious injury.  
wARNING:  
cAUTION:  
cAUTION:  
Indicates a potentially hazardous situation, which, if not avoided, may result in  
minor or moderate injury.  
(Without Safety Alert Symbol) Indicates a situation that may result in property  
damage.  
SERvIcE  
wARNING:  
Servicing requires extreme care and knowledge and should  
be performed only by a qualified service technician. For  
service we suggest you return the product to the nearest  
AUTHORIZEd SERvIcE cENTER for repair. When  
servicing, use only identical replacement parts.  
To avoid serious personal injury, do not attempt  
to use this product until you read thoroughly and  
understand completely the operator’s manual. If you  
do not understand the warnings and instructions in the  
operator’s manual, do not use this product. Call Ryobi  
customer service for assistance.  
wARNING:  
The operation of any power tool can result in foreign objects being thrown into your eyes, which can  
result in severe eye damage. Before beginning power tool operation, always wear safety goggles or  
safety glasses with side shields and, when needed, a full face shield. We recommend Wide Vision  
Safety Mask for use over eyeglasses or standard safety glasses with side shields. Always use eye  
protection which is marked to comply with ANSI Z87.1.  
SAvE THESE INSTRUcTIONS  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
FEATURES  
PROdUcT SPEcIFIcATIONS  
Torque..................................................................... 45 in. lb  
Collet ........................................SPEEDLOAD +™ SYSTEM  
Charger Input.....................................1ꢀ0 V, AC only, 60 Hz  
Charge Rate .......................................................9-1ꢀ hours  
Motor........................................................................4 V DC  
Switch...........................................Single Speed/Reversible  
No Load Speed ........................................180 r/min. (RPM)  
Clutch.............................................................. 1ꢀ Positions  
TORQUE  
ADJUSTMENT RING  
SPEEDLOAD +™  
SYSTEM  
DIRECTION OF  
ROTATION SELECTOR  
(FORWARD/REVERSE/  
CENTER LOCK)  
LED  
WORKLIGHT  
SWITCH  
TRIGGER  
CHARGER  
Fig. 1  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
FEATURES  
LEd wORkLIGHT  
kNOw yOUR ScREwdRIvER  
The screwdriver has a built-in LED worklight that illumi-  
nates when the switch trigger is depressed. This feature is  
convenient when working in close or tight areas where  
additional light is needed.  
See Figure 1.  
The safe use of this product requires an understanding of  
the information on the tool and in this operator’s manual as  
wellasaknowledgeoftheprojectyouareattempting.Before  
use of this product, familiarize yourself with all operating  
features and safety rules.  
SPEEdLOAd +™ SySTEM  
Your screwdriver has the SPEEDLOAD +™ SYSTEM, the  
fastest and most convenient way to change any 1/4 in. hex  
shank bits.  
dIREcTION OF ROTATION SELEcTOR  
(FORwARd/REvERSE/cENTER LOck)  
Your screwdriver has a direction of rotation (forward/  
reverse/center lock) selector located above the switch trigger  
for changing the direction of bit rotation. Setting the switch  
trigger in the OFF (center lock) position helps reduce the  
possibility of accidental starting when not in use.  
TORQUE AdJUSTMENT RING  
Your screwdriver has a 1ꢀ-position clutch. The torque  
adjustment ring can be turned to select the right amount of  
torque for the application.  
ASSEMBLy  
UNPAckING  
This product has been shipped completely assembled.  
wARNING:  
If any parts are damaged or missing do not operate this  
product until the parts are replaced. Failure to heed this  
warning could result in serious personal injury.  
Carefully remove the product and any accessories from  
the box. Make sure that all items listed in the packing list  
are included.  
Inspect the product carefully to make sure no breakage  
or damage occurred during shipping.  
wARNING:  
Do not discard the packing material until you have care-  
Do not attempt to modify this product or create acces-  
sories not recommended for use with this product. Any  
such alteration or modification is misuse and could result  
in a hazardous condition leading to possible serious  
personal injury.  
fully inspected and satisfactorily operated the product.  
If any parts are damaged or missing, please call  
1-800-5ꢀ5-ꢀ579 for assistance.  
PAckING LIST  
Screwdriver  
Bit Set  
wARNING:  
Tool Bag  
To prevent accidental starting that could cause serious  
personal injury, always remove the battery pack from the  
product when assembling parts.  
Charger  
Operator’s Manual  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATION  
wARNING:  
INPUT  
JACK  
Do not allow familiarity with products to make you  
careless. Remember that a careless fraction of a second  
is sufficient to inflict serious injury.  
RED  
CHARGE LIGHT  
wARNING:  
Always wear safety goggles or safety glasses with side  
shields when operating products. Failure to do so could  
result in objects being thrown into your eyes, resulting in  
possible serious injury.  
CHARGER PLUG  
wARNING:  
Do not use any attachments or accessories not  
recommended by the manufacturer of this product. The  
use of attachments or accessories not recommended  
can result in serious personal injury.  
CHARGER  
Fig. ꢀ  
TORQUE  
ADJUSTMENT RING  
APPLIcATIONS  
TO INCREASE  
TORQUE  
ARROW  
You may use this product for the purposes listed below:  
Drivi g screws with screwdriver bits  
Light-duty drilli g  
TO cHARGE  
See Figure 2.  
When charging the screwdriver, a red charge light will  
illuminate on the handle of the screwdriver. This red charge  
light will go off when the screwdriver is fully charged.  
Insert charger plug into input jack making sure it is  
properly connected.  
Charger can be used with normal household current of  
TO DECREASE  
TORQUE  
1ꢀ0 V, AC only, 60 Hz.  
Connect charger to power supply.  
After normal usage, a minimum of 9 hours of charging  
time is required to fully recharge the screwdriver.  
do not place charger in an area of extreme heat or cold.  
It will work best at normal room temperature.  
Remove the product from the charger once it is fully  
Fig. 3  
charged and ready for use.  
AdJUSTABLE TORQUE cLUTcH  
wARNING:  
This screwdriver is equipped with an adjustable torque clutch  
for driving different types of screws into different materials.  
The proper setting depends on the type of material and the  
size of screw you are using.  
Battery products are always in operating condition.  
Therefore, the switch should always be locked when not  
in use or carrying at your side.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATION  
AdJUSTING TORQUE  
See Figure 3.  
REVERSE  
There are twelve torque indicator settings located on the  
front of the screwdriver.  
Rotate adjustment ring to desired setting, aligning num-  
ber on adjustment ring with arrow on housing.  
1 - ꢀ For driving small screws  
3 - 4 For driving screws into soft material  
5 - 7 For driving screws into soft and hard  
materials  
8 - 9 For driving screws into hard wood  
10 - 11 For driving large screws  
For full power applications  
FORWARD  
Fig. 4  
dIREcTION OF ROTATION SELEcTOR  
(FORwARd/REvERSE/cENTER LOck)  
SPEEDLOAD +™ SYSTEM  
See Figure 4.  
The direction of bit rotation is reversible and is controlled  
by a selector located above the switch trigger. With the  
screwdriver held in normal operating position, the direction  
of rotation selector should be positioned to the left of the  
switch trigger for forward motion. The direction is reversed  
when the selector is to the right of the switch trigger.  
RUBBER  
COLLAR  
L0AD BIT  
Setting the switch trigger in the OFF (center lock) position  
helps reduce the possibility of accidental starting when not  
in use.  
BIT  
cAUTION:  
To prevent gear damage, always allow the collet to  
come to a complete stop before changing the direction  
of rotation.  
RELEASE BIT  
Fig. 5  
To stop the screwdriver, release the switch trigger and allow  
the collet to come to a complete stop.  
NOTE: The screwdriver will not run unless the direction of  
rotation selector is pushed fully to the left or right.  
TO LOAd/RELEASE BITS  
See Figure 5.  
The SPEEDLOAD +™ SYSTEM on the screwdriver is a quick  
change chuck designed to accept any 1/4 in. hex bits. Insert  
the bit into the chuck and push as far as possible until the  
chuck locks onto the bit. To remove a bit, push rubber collar  
forward, and then pull the bit straight out of the chuck.  
LED  
WORKLIGHT  
LEd wORkLIGHT  
See Figure 6.  
The screwdriver has a built-in LED worklight. This feature is  
convenient when working in close or tight areas where  
additional light is needed. Whenever the switch trigger is  
depressed, the LED worklight will illuminate.  
NOTE: During normal operation, if the LED worklight will not  
illuminate, charge the screwdriver.  
Fig. 6  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MAINTENANcE  
wARNING:  
wARNING:  
When servicing, use only identical replacement parts.  
Use of any other parts may create a hazard or cause  
product damage.  
Do not at any time let brake fluids, gasoline, petroleum-  
based products, penetrating oils, etc., come in contact  
with plastic parts. Chemicals can damage, weaken or  
destroy plastic which may result in serious personal  
injury.  
wARNING:  
Only the parts shown on the parts list are intended to be  
repaired or replaced by the customer. All other parts should  
be replaced at an Authorized Service Center.  
Always wear safety goggles or safety glasses with side  
shields during product operation or when blowing dust.  
If operation is dusty, also wear a dust mask.  
BATTERIES  
This product is equipped with a lithium-ion rechargeable  
battery. Length of service from each charging will depend  
on the type of work you are doing.  
The battery in this product has been designed to provide  
maximum trouble-free life. However, like all batteries, it will  
eventually wear out.  
To obtain the longest possible battery life, we suggest the  
following:  
Remove the product from the charger once it is fully  
charged and ready for use.  
wARNING:  
To avoid serious personal injury, always remove the  
battery pack from the product when cleaning or  
performing any maintenance.  
GENERAL MAINTENANcE  
Avoid using solvents when cleaning plastic parts. Most  
plastics are susceptible to damage from various types of  
commercial solvents and may be damaged by their use. Use  
clean cloths to remove dirt, dust, oil, grease, etc.  
For product storage longer than 30 days:  
Store the product where the temperature is below 80°F.  
Store the product in a “discharged” condition.  
1ꢀ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MAINTENANcE  
BATTERy PAck REMOvAL ANd PREPARATION  
FOR REcycLING  
See Figure 7.  
SCREW(S)  
MOTOR  
HOUSING  
Remove the four screws securing motor housing cover,  
then remove cover.  
Lift batteries from motor housing enough to expose leads  
and battery terminals.  
Disconnect the red lead from the battery by pulling apart  
as shown.  
Disconnect the black lead from the battery by pulling  
apart as shown.  
NOTE: Be careful not to break battery leads when  
disconnecting them.  
Remove the battery for disposal.  
To preserve natural resources, please recycle or dispose of  
batteries properly.  
This product contains lithium-ion  
batteries. Local, state or federal laws  
may prohibit disposal of batteries in  
ordinary trash.  
BATTERY  
TERMINAL  
Consult your local waste authority  
for information regarding available  
recycling and/or disposal options.  
Li - Ion  
BATTERY  
LEAD  
wARNING:  
BATTERY  
TERMINAL  
Upon removal, cover the battery pack’s terminals with  
heavy-duty adhesive tape. Do not attempt to destroy or  
disassemble battery pack or remove any of its compo-  
nents. Lithium-ion batteries must be recycled or disposed  
of properly. Also, never touch both terminals with metal  
objects and/or body parts as short circuit may result.  
Keep away from children. Failure to comply with these  
warnings could result in fire and/or serious injury.  
BATTERY  
Fig. 7  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATOR’S MANUAL  
4 v LITHIUM-ION ScREwdRIvER  
REvERSIBLE  
HP41L  
wARNING:  
Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains  
chemicals known to cause cancer, birth defects or other reproductive harm. Some examples of these  
chemicals are:  
lead from lead-based paints,  
crystalline silica from bricks and cement and other masonry products, and  
arsenic and chromium from chemically-treated lumber.  
Your risk from these exposures varies, depending on how often you do this type of work. To reduce your  
exposure to these chemicals: work in a well ventilated area, and work with approved safety equipment, such  
as those dust masks that are specially designed to filter out microscopic particles.  
PARTS AND SERVICE  
Prior to requesting service or purchasing replacement parts, please obtain your model  
and serial number from the product data plate.  
HP41L  
• MODEL NUMBER  
• SERIAL NUMBER  
HOW TO OBTAIN REPLACEMENT PARTS:  
Replacement parts can be purchased online at www.ryobitools.com or by calling  
1-800-5ꢀ5-ꢀ579. Replacement parts can also be obtained at one of our Authorized  
Service Centers.  
HOW TO LOCATE AN AUTHORIZED SERVICE CENTER:  
Authorized Service Centers can be located online at www.ryobitools.com or by calling  
1-800-5ꢀ5-ꢀ579.  
HOW TO OBTAIN CUSTOMER OR TECHNICAL SUPPORT:  
To obtain Customer or Technical Support please contact us at 1-800-5ꢀ5-ꢀ579.  
RYOBI® is a registered trademark of Ryobi Limited used under license.  
ONE wORLd TEcHNOLOGIES, INc.  
14ꢀ8 Pearman Dairy Road, Anderson, SC ꢀ96ꢀ5  
Phone 1-800-5ꢀ5-ꢀ579  
www.ryobitools.com  
987000-318  
03-07-08 (REV:01)  
Download from Www.Somanuals.com. All Manuals Search And Download.  

RCA CRT Television Televison User Guide
REL Acoustics Speaker System Stentor III User Guide
RoadPro Security Camera D3201 User Guide
Samsung Cell Phone TMO_T369 User Guide
Samsung CRT Television 29Z6 User Guide
Samsung Home Security System SDR4200 User Guide
Sanyo Battery Charger UF553443F User Guide
Schumacher Battery Charger SF 51A PE User Guide
Schumacher Battery Charger SF 2151MA User Guide
Screenlife Video Games Twilight User Guide