OPERATOR’S MANUAL
18 VOLT BLOWER
P2100
P2100A
P2100B
ACCEPTS ALL ONE+ BATTERY PACKS
BATTERIES & CHARGERS SOLd SEPARATELY
Your blower has been engineered and manufactured to our high standard for dependability, ease of operation, and operator
safety. When properly cared for, it will give you years of rugged, trouble-free performance.
WARNING: To reduce the risk of injury, the user must read and understand the operator’s manual before using
this product.
Thank you for your purchase.
SAVE THIS MANUAL FOR FUTURE REFERENCE
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
do not operate blower with a damaged cord or plug,
IMPORTANT SAFETY INSTRUCTIONS
which could cause shorting and electric shock. If
damaged, have the charger replaced by an authorized
serviceman.
When using an electrical appliance, basic precautions should
always be followed, including the following:
Stay alert, watch what you are doing and use
common sense when operating a power blower. do
not use blower while tired or under the influence of
drugs, alcohol, or medication. A moment of inattention
while operating blowers may result in serious personal
injury.
WARNING!
REAd ANd UNdERSTANd ALL INSTRUCTIONS
BEFORE USING THIS BLOWER. To reduce the risk of
electric shock, fire and/or serious personal injury.
dress properly. do not wear loose clothing or jewelry.
Contain long hair. Keep your hair, clothing, and gloves
away from moving parts. Loose clothes, jewelry, or long
hair can be caught in moving parts.
Avoidaccidentalstarting.Besureswitchisinthelocked
or off position before inserting battery pack. Carrying
blowers with your finger on the switch or inserting the bat-
terypackintoablowerwiththeswitchoninvitesaccidents.
Use safety equipment. Always wear eye protection.
Dust mask, non-skid safety shoes, hard hat, or hearing
protection must be used for appropriate conditions.
do not wear loose clothing or jewelry. Contain long
hair. Loose clothes, jewelry, or long hair can be drawn
into air vents.
do not use on a ladder or unstable support. Stable
footing on a solid surface enables better control of the
blower in unexpected situations.
do not leave blower unattended or running when
turned on.
do not allow to be used as a toy. Close attention is
necessary when used by or near children.
Use only accessories that are recommended by the
manufacturer for your model. Accessories that may be
suitable for one blower may create a risk of injury when
used on another blower.
do not handle plug or blower with wet hands.
do not put any object into openings. do not use with
any opening blocked; keep free of dust, lint, hair, and
anything that may reduce air flow.
Keep hair, loose clothing, fingers, and all parts of body
away from openings and moving parts.
Turn off all controls before removing battery.
Use extra care when cleaning on stairs.
do not use blower if switch does not turn it on or off.
A blower that cannot be controlled with the switch is
dangerous and must be repaired.
disconnect battery pack from blower or place the
switch in the locked or off position before making
any adjustments, changing accessories, or storing
the blower. Such preventive safety measures reduce the
risk of starting the blower accidentally.
When battery pack is not in use, keep it away from
other metal objects like: paper clips, coins, keys, nails,
screws, or other small metal objects that can make
a connection from one terminal to another. Shorting
the battery terminals together may cause sparks, burns,
or a fire.
do not operate blowers in explosive atmospheres,
such as in the presence of flammable liquids, gases,
or dust. Blowers create sparks which may ignite the dust
or fumes.
Keep your work area clean and well lit. Cluttered
benches and dark areas invite accidents.
Keep bystanders, children, and visitors away while
operating a blower. Distractions can cause you to lose
control.
A battery operated blower with integral batteries or
a separate battery pack must be recharged only with
the specified charger for the battery. A charger that
may be suitable for one type of battery may create a risk
of fire when used with another battery.
Check for misalignment or binding of moving parts,
breakage of parts, and any other condition that may
affect the blower’s operation. If damaged, have the
blower serviced before using. Many accidents are
caused by poorly maintained blowers.
Use battery operated blower only with specifically
designated battery pack. Use of any other batteries may
create a risk of fire.
Use battery only with charger listed.
Keep the blower and its handle dry, clean and free
from oil and grease. Always use a clean cloth when
cleaning. Never use brake fluids, gasoline, petroleum-
based products, or any strong solvents to clean your
blower. Following this rule will reduce the risk of loss of
control and deterioration of the enclosure plastic.
MOdEL
BATTERY PACK
CHARGER (P113)
(P104 Li-ion)
1304ꢀ9001, 1304ꢀ900ꢀ
130155001
140501001
140501005
Pꢀ100
Pꢀ100A
Pꢀ100B
(P100 Ni-Cd)
130ꢀ55004, 130ꢀꢀ40ꢀ8
BATTERY PACK
CHARGER (P110)
14ꢀ3701, 140ꢀ370ꢀ1,
140ꢀ370ꢀ3
(P100 Ni-Cd)
130ꢀ55004, 130ꢀꢀ40ꢀ8
3
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
Know your power blower. Read operator’s manual
do not charge blower battery in a damp or wet
location. Following this rule will reduce the risk of electric
shock.
carefully. Learn its applications and limitations, as
well as the specific potential hazards related to this
blower. Following this rule will reduce the risk of electric
shock, fire, or serious injury.
Keep firm footing and balance. do not overreach.
Overreaching can result in loss of balance.
Always wear safety glasses with side shields.
Everyday glasses have only impact resistant lenses. They
are NOT safety glasses. Following this rule will reduce
the risk of eye injury.
Check the work area before each use. Remove all
objects such as rocks, broken glass, nails, wire, or string
which can be thrown or become entangled in the ma-
chine.
Wear eye protection which is marked to comply with
do not point the blower nozzle in the direction of
people or pets.
ANSI Z87.1 when operating this product.
Protect your lungs. Wear a face or dust mask if the
operation is dusty. Following this rule will reduce the risk
of serious personal injury.
Never run the unit without the proper equipment at-
tached. Always ensure the blower tubes are installed.
When not in use, blower should be stored indoors in
Protect your hearing. Wear hearing protection during
extended periods of operation. Following this rule will
reduce the risk of serious personal injury.
a dry, locked up place—out of the reach of children.
Keep all bystanders, children, and pets at least 50 ft.
away.
Battery blowers do not have to be plugged into an
electrical outlet; therefore, they are always in operat-
ing condition. Be aware of possible hazards when not
using your battery powered blower or when changing
accessories. Following this rule will reduce the risk of
electric shock, fire, or serious personal injury.
For best results, your blower battery should be
charged in a location where the temperature is more
than 50°F but less than 100°F. do not store outside or
in vehicles.
Under extreme usage or temperature conditions,
battery leakage may occur. If liquid comes in contact
with your skin, wash immediately with soap and water,
then neutralize with lemon juice or vinegar. If liquid
gets into your eyes, flush them with clean water for
at least 10 minutes, then seek immediate medical at-
tention. Following this rule will reduce the risk of serious
personal injury.
do not place battery powered blowers or their batter-
ies near fire or heat. This will reduce the risk of explosion
and possibly injury.
do not crush, drop or damage battery pack. do not
use a battery pack or charger that has been dropped
or received a sharp blow. A damaged battery is subject
to explosion. Properly dispose of a dropped or damaged
battery immediately.
do not incinerate this blower even if it is severely
damaged. The batteries can explode in a fire.
don’t expose blowers to rain or wet conditions.
Water entering a blower will increase the risk of electric
shock.
Blower service must be performed only by qualified
repair personnel. Service or maintenance performed by
u qualified perso el may result i a risk of i jury.
When servicing a blower, use only identical replace-
ment parts. Follow instructions in the Maintenance sec-
tion of this manual. Use of unauthorized parts or failure
to follow Maintenance Instructions may create a risk of
shock or i jury.
Wear heavy long pants, boots, and gloves. Avoid loose
garments or jewelry that could get caught in moving parts
of the machine or its motor.
do not operate the equipment while barefoot or when
wearing sandals or similar lightweight footwear. Wear
protective footwear that will protect your feet and improve
your footing on slippery surfaces.
Batteries vent hydrogen gas and can explode in the
presence of a source of ignition, such as a pilot light.
To reduce the risk of serious personal injury, never use
any cordless product in the presence of open flame. An
exploded battery can propel debris and chemicals. If
exposed, flush with water immediately.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
SYMBOLS
Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper inter-
pretation of these symbols will allow you to operate the product better and safer.
SYMBOL
NAME
dESIGNATION/EXPLANATION
V
Volts
Voltage
Current
A
Hz
W
Amperes
Hertz
Frequency (cycles per second)
Watt
Power
min
Minutes
Time
Alternating Current
Type of current
Direct Current
Type or a characteristic of current
Double-insulated construction
Class II Construction
Wet Conditions Alert
Do not expose to rain or use in damp locations.
To reduce the risk of injury, user must read and understand
operator’s manual before using this product.
Read The Operator’s Manual
Safety Alert
Precautions that involve your safety.
Keep Bystanders Away
Keep all bystanders at least 50 ft. away.
Wear eye and hearing protection when operating this equipment.
Eye and Hearing Protection
Long Hair
Failure to keep long hair away from the air inlet could result in
personal injury.
Blower Tubes
Do not operate without tubes in place.
Failure to keep loose clothing from being drawn into air intake
could result in personal injury.
Loose Clothing
5
Download from Www.Somanuals.com. All Manuals Search And Download.
SYMBOLS
The following signal words and meanings are intended to explain the levels of risk associated with this product.
SYMBOL
SIGNAL
MEANING
Indicates an imminently hazardous situation, which, if not avoided, will result
in death or serious injury.
dANGER:
Indicates a potentially hazardous situation, which, if not avoided, could result
in death or serious injury.
WARNING:
CAUTION
CAUTION
Indicates a potentially hazardous situation, which, if not avoided, may result in
minor or moderate injury.
(Without Safety Alert Symbol) Indicates a situation that may result in property
damage.
SERVICE
WARNING:
Servicing requires extreme care and knowledge and should
be performed only by a qualified service technician. For
service we suggest you return the product to the nearest
AUTHORIZEd SERVICE CENTER for repair. When servic-
ing, use only identical replacement parts.
To avoid serious personal injury, do not attempt to use this
product until you read thoroughly and understand com-
pletely the operator’s manual. If you do not understand
the warnings and instructions in the operator’s manual,
do not use this product. Call Ryobi customer service for
assistance.
WARNING:
The operation of any power tool can result in foreign objects being thrown into your eyes, which can
result in severe eye damage. Before beginning power tool operation, always wear safety goggles or
safety glasses with side shields and, when needed, a full face shield. We recommend Wide Vision
Safety Mask for use over eyeglasses or standard safety glasses with side shields. Always use eye
protection which is marked to comply with ANSI Z87.1.
SAVE THESE INSTRUCTIONS
6
Download from Www.Somanuals.com. All Manuals Search And Download.
FEATURES
PROdUCT SPECIFICATIONS
Weight ............................................................................................................................................................................5 lbs.
Motor......................................................................................................................................................................18 Volt DC
Air Velocity:
MPH...............................................................................................................................................................................1ꢀ0
POWER
SWITCH
BLOWER
HOUSING
OUTLET
BLOWER
TUBE
Fig. 1
BLOWER TUBE
The blower tube can be installed on the blower without
using any tools.
KNOW YOUR BLOWER
See Figure 1.
The safe use of this product requires an understanding of
the information on the tool and in this operator’s manual as
well as a knowledge of the project you are attempting. Before
use of this product, familiarize yourself with all operating
features and safety rules.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
ASSEMBLY
UNPACKING
This product requires assembly.
WARNING:
Carefully remove the product and any accessories from
the box. Make sure that all items listed in the packing list
are included.
To prevent accidental starting that could cause serious
personal injury, always remove the battery pack from the
tool when assembling parts.
Inspect the product carefully to make sure no breakage
ASSEMBLING THE BLOWER TUBE
or damage occurred during shipping.
See Figure 2.
Do not discard the packing material until you have care-
With the logo area facing up, slide the blower tube over
fully inspected and satisfactorily operated the product.
the outlet on the blower housing.
If any parts are damaged or missing, please call
Press down on the tab on the blower housing outlet.
1-800-860-4050 for assistance.
Push tab on outlet on the blower housing down until
it locks into place through the opening in the blower
tube.
PACKING LIST
Blower
Blower Tube
Operator’s Manual
PRESS TO
RELEASE
WARNING:
If any parts are damaged or missing do not operate
this tool until the parts are replaced. Failure to heed this
warning could result in serious personal injury.
BLOWER
TUBE
WARNING:
Do not attempt to modify this product or create accesso-
ries not recommended for use with this blower. Any such
alteration or modification is misuse and could result in a
hazardous condition leading to possible serious personal
injury.
BLOWER
HOUSING
OUTLET
Fig. ꢀ
OPERATION
WARNING:
WARNING:
Do not use any attachments or accessories not recom-
mended by the manufacturer of this product. The use of
attachments or accessories not recommended can result
in serious personal injury.
Do not allow familiarity with products to make you care-
less. Remember that a careless fraction of a second is
sufficient to inflict serious injury.
WARNING:
WARNING:
Always wear safety goggles or safety glasses with side
shields when operating power tools. Failure to do so could
result in objects being thrown into your eyes, resulting in
possible serious injury.
Blower is intended for household use only.
APPLICATIONS
You may use this product for the purposes listed below:
Clearing hard surfaces such as driveways and walkways
Keeping decks and driveways free from leaves and pine
needles
8
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATION
This product will accept Ryobi One+ 18 V lithium-ion
battery packs and Ryobi One+ 18 V nickel-cadmium battery
packs.
TOP VIEW
For complete charging instructions, refer to the operator’s
manual for the P113 charger. For battery pack instructions,
see the manual for the P104 lithium-ion battery pack or the
P100 nickel-cadmium battery pack.
POWER
SWITCH
STARTING/STOPPING THE BLOWER
See Figure 3.
To start the blower, place the power switch in the ON (l)
position.
To stop the blower, place the power switch in the OFF
(O) position.
TO INSTALL BATTERY PACK
See Figure 4.
Place the power switch in the OFF (O) position.
Place the battery pack in the blower. Align raised rib on
battery pack with groove in the blower’s battery port.
Fig. 3
Make sure the latches on each side of the battery pack
snap in place and that battery pack is secured in the
blower before beginning operation.
CAUTION:
LATCHES
When placing battery pack in the blower, be sure
raised rib on battery pack aligns with the back of
the blower and latches into place properly. Improper
installation of the battery pack can cause damage to
internal components.
TO REMOVE BATTERY PACK
See Figure 4.
Place the power switch in the OFF (O) position.
Locate latches on side of battery pack and depress both
BATTERY PACK
Fig. 4
sides to release battery pack.
Remove battery pack from the blower.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATION
WARNING:
Battery tools are always in operating condition. Therefore,
switch should always be in the OFF position when not in
use or carrying at your side.
OPERATING THE BLOWER
See Figure 5.
To keep from scattering debris, blow around the outer
edges of a debris pile. Never blow directly into the center
of a pile.
To reduce sound levels, limit the number of pieces of
equipment used at any one time.
Use rakes and brooms to loosen debris before blowing.
In dusty conditions, slightly dampen surfaces when water
is available.
Conserve water by using power blowers instead of hoses
for many lawn and garden applications, including areas
such as gutters, screens, patios, grills, porches, and
gardens.
Watch out for children, pets, open windows, or freshly
washed cars, and blow debris safely away.
After using blowers or other equipment, CLEAN UP!
Dispose of debris properly.
Fig. 5
10
Download from Www.Somanuals.com. All Manuals Search And Download.
MAINTENANCE
GENERAL MAINTENANCE
WARNING:
Avoid using solvents when cleaning plastic parts. Most
plastics are susceptible to damage from various types of
commercial solvents and may be damaged by their use. Use
clean cloths to remove dirt, dust, oil, grease, etc.
When servicing, use only identical replacement parts.
Use of any other parts may create a hazard or cause
product damage.
WARNING:
WARNING:
Do not at any time let brake fluids, gasoline, petroleum-
based products, penetrating oils, etc., come in contact
with plastic parts. Chemicals can damage, weaken or
destroy plastic which may result in serious personal
injury.
Always wear safety goggles or safety glasses with side
shields during power tool operation or when blowing
dust. If operation is dusty, also wear a dust mask.
WARNING:
Only the parts shown on the parts list are intended to be
repaired or replaced by the customer. All other parts should
be replaced at an Authorized Service Center.
To avoid serious personal injury, always remove the
battery pack from the product when cleaning or perform-
ing any maintenance.
STORAGE
Clean all foreign material from the blower.
Store indoors in a place that is inaccessible to children.
Keep away from corrosive agents such as garden chemi-
cals and de-icing salts.
BATTERY PACK REMOVAL ANd PREPARATION
FOR RECYCLING
BATTERIES
This product will accept 18 V lithium-ion batteries or 18 V
nickel-cadmium batteries. Length of service from each
charging will depend on the type of work you are doing.
To preserve natural resources, please
recycle or dispose of batteries
properly.
The batteries for this product have been designed to provide
maximum trouble-free life. However, like all batteries, they
will eventually wear out. Do not disassemble battery pack
and attempt to replace the batteries. Handling of these
batteries, especially when wearing rings and jewelry, could
result in a serious burn.
Li - Ion
This product uses nickel-cadmium and
lithium-ion batteries. Local, state or
federal laws may prohibit disposal of
batteries in ordinary trash.
Consult your local waste authority for
information regarding available recycling
and/or disposal options.
To obtain the longest possible battery life, we suggest the
following:
For lithium-ion batteries:
Remove the battery pack from the charger once it is fully
WARNING:
charged and ready for use.
Upon removal, cover the battery pack’s terminals with
heavy-duty adhesive tape. Do not attempt to destroy or
disassemble battery pack or remove any of its compo-
nents. Lithium-ion and nickel-cadmium batteries must
be recycled or disposed of properly. Also, never touch
both terminals with metal objects and/or body parts as
short circuit may result. Keep away from children. Failure
to comply with these warnings could result in fire and/or
serious injury.
For battery pack storage longer than 30 days:
Store the battery pack where the temperature is below
80°F and away from moisture.
Store battery packs in a 30%-50% charged condition.
Every six months of storage, charge the pack as
normal.
For nickel-cadmium batteries:
Remove the battery pack from the charger once it is fully
charged and ready for use.
For battery pack storage longer than 30 days:
Store the battery pack where the temperature is below
80°F.
Store battery packs in a “discharged” condition.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
WARRANTY
LIMITEd WARRANTY STATEMENT
A. Tune-ups – Spark Plugs, Carburetor, Carburetor
Adjustments, Ignition, Filters
Techtronic Industries North America, Inc., warrants to the
original retail purchaser that this RYOBI® brand outdoor
product is free from defect in material and workmanship
and agrees to repair or replace, at Techtronic Industries
North America, Inc.’s, discretion, any defective product
free of charge within these time periods from the date of
purchase.
B. Wear items – Bump Knobs, Outer Spools, Cutting
Lines, Inner Reels, Starter Pulleys, Starter Ropes, Drive
Belts,Tines,FeltWashers,HitchPins,MulchingBlades,
Blower Fans, Blower and Vacuum Tubes, Vacuum Bag
and Straps, Guide Bars, Saw Chains
Techtronic Industries North America, Inc., reserves the
right to change or improve the design of any RYOBI® brand
outdoorproductwithoutassuminganyobligationtomodify
any product previously manufactured.
Two years if the product is used for personal, family or
household use;
90 days, if used for any other purpose, such as
commercial or rental.
ALL IMPLIED WARRANTIES ARE LIMITED IN DURATION
TO THE STATED WARRANTY PERIOD. ACCORDINGLY,
ANY SUCH IMPLIED WARRANTIES INCLUDING
MERCHANTABILITY, FITNESS FOR A PARTICULAR
PURPOSE, OR OTHERWISE, ARE DISCLAIMED IN
THEIR ENTIRETY AFTER THE EXPIRATION OF THE
APPROPRIATE TWO-YEAR, ONE-YEAR, OR NINETY-
DAY WARRANTY PERIOD. TECHTRONIC INDUSTRIES
NORTH AMERICA, INC.’S, OBLIGATION UNDER THIS
WARRANTYISSTRICTLYANDEXCLUSIVELYLIMITEDTO
THE REPAIR OR REPLACEMENT OF DEFECTIVE PARTS
AND TECHTRONIC INDUSTRIES NORTH AMERICA,
INC., DOES NOT ASSUME OR AUTHORIZE ANYONE
TO ASSUME FOR THEM ANY OTHER OBLIGATION.
SOME STATES DO NOT ALLOW LIMITATIONS ON HOW
LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE
LIMITATION MAY NOT APPLY TO YOU. TECHTRONIC
INDUSTRIES NORTH AMERICA, INC., ASSUMES NO
RESPONSIBILITY FOR INCIDENTAL, CONSEQUENTIAL,
OR OTHER DAMAGES INCLUDING, BUT NOT LIMITED
TO, EXPENSE OF RETURNING THE PRODUCT TO AN
AUTHORIZED RYOBI SERVICE CENTER AND EXPENSE
OFDELIVERINGITBACKTOTHEOWNER, MECHANIC’S
TRAVEL TIME, TELEPHONE OR TELEGRAM CHARGES,
RENTAL OF A LIKE PRODUCT DURING THE TIME
WARRANTY SERVICE IS BEING PERFORMED, TRAVEL,
LOSS OR DAMAGE TO PERSONAL PROPERTY, LOSS
OF REVENUE, LOSS OF USE OF THE PRODUCT,
LOSS OF TIME, OR INCONVENIENCE. SOME STATES
DO NOT ALLOW THE EXCLUSION OR LIMITATION OF
INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE
ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY
TO YOU.
This warranty extends to the original retail purchaser
only and commences on the date of the original retail
purchase.
Any part of this product found in the reasonable judgment
ofTechtronicIndustriesNorthAmerica, Inc. tobedefective
in material or workmanship will be repaired or replaced
withoutchargeforpartsandlaborbyanauthorizedservice
center for RYOBI® brand outdoor products (Authorized
Ryobi Service Center).
Theproduct,includinganydefectivepart,mustbereturned
to an authorized Ryobi service center within the warranty
period.Theexpenseofdeliveringtheproducttotheservice
center for warranty work and the expense of returning it
back to the owner after repair or replacement will be paid
by the owner. Techtronic Industries North America, Inc.’s,
responsibility in respect to claims is limited to making the
required repairs or replacements and no claim of breach of
warrantyshallbecauseforcancellationorrescissionofthe
contractofsaleofanyRYOBI® brandoutdoorproduct.Proof
of purchase will be required by the dealer to substantiate
any warranty claim. All warranty work must be performed
by an authorized service dealer.
This warranty is limited to ninety (90) days from the date
of original retail purchase for any RYOBI® brand outdoor
product that is used for rental or commercial purposes, or
any other income-producing purpose.
This warranty does not cover any product that has been
subject to misuse, neglect, negligence, or accident, or that
has been operated in any way contrary to the operating
instructions as specified in this operator’s manual. This
warranty does not apply to any damage to the product that
is the result of improper maintenance or to any product
that has been altered or modified. The warranty does not
extendtorepairsmadenecessarybynormalwearorbythe
use of parts or accessories which are either incompatible
withtheRYOBI® brandoutdoorproductoradverselyaffect
its operation, performance, or durability. In addition, this
warranty does not cover:
This warranty gives you specific legal rights, and you may
also have other rights which vary from state to state.
ThiswarrantyappliestoallRYOBI® brandoutdoorproducts
manufacturedbyorforTechtronicIndustriesNorthAmerica,
Inc., and sold in the United States and Canada.
To locate your nearest Authorized Ryobi Service Center,
dial 1-800-860-4050.
1ꢀ
Download from Www.Somanuals.com. All Manuals Search And Download.
NOTES
13
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATOR’S MANUAL
BLOWER
P2100
P2100A
P2100B
• PARTS AND SERVICE
Prior to requesting service or purchasing replacement parts, please obtain your model
and serial number from the product data plate.
Pꢀ100/Pꢀ100A/Pꢀ100B
• MODEL NUMBER
• SERIAL NUMBER
• HOW TO OBTAIN REPLACEMENT PARTS:
1-800-860-4050. Replacement parts can also be obtained at one of our Authorized
Service Centers.
• HOW TO LOCATE AN AUTHORIZED SERVICE CENTER:
1-800-860-4050.
• HOW TO OBTAIN CUSTOMER OR TECHNICAL SUPPORT:
To obtain Customer or Technical Support please contact us at 1-800-860-4050.
RYOBI® is a registered trademark of Ryobi Limited used under license.
TECHTRONIC INdUSTRIES NORTH AMERICA, INC.
14ꢀ8 Pearman Dairy Road, Anderson, SC ꢀ96ꢀ5
Phone 1-800-860-4050
983000-961
0ꢀ-ꢀ5-08 (REV:04)
Download from Www.Somanuals.com. All Manuals Search And Download.
|