CAM6 .6
Six -Zo n e , Six -So u rce Co n tro lle r
CAM6 .6 T
Six -Zo n e , Six -So u rce AM/ FM Re ce ive r
IN STRUCTIO N MAN UAL
Download from Www.Somanuals.com. All Manuals Search And Download.
TABLE OF CONTENTS
USER SECTION
Product Introduction ............................................................................................................................5
Component Guide
CAM6.6 Controller ..............................................................................................................................6
UNO-S1 Keypad..................................................................................................................................7
UNO-S2 Keypad .................................................................................................................................8
UNO-TS2 Touchscreen ........................................................................................................................9
SRC2 Remote Control .......................................................................................................................10
Operation
UNO-S1 Keypad Button Function ........................................................................................................11
UNO-S1 User Menu...........................................................................................................................12
UNO-S2 Keypad Button Function ........................................................................................................13
UNO-S2 User Menu...........................................................................................................................14
UNO-TS2 Touchscreen Button Function...............................................................................................15
UNO-TS2 - Setting Preferences ..........................................................................................................16
Internal Source - AM/ FM Tuner
UNO-S1 Keypad Control ....................................................................................................................17
UNO-S2 Keypad Control ..............................................................................................................18-19
UNO-TS2 Touchscreen Control ......................................................................................................20-21
SRC2 Remote Control .................................................................................................................22-23
INSTALLER SECTION
Getting Started
Unpacking ........................................................................................................................................25
Tools Needed ...................................................................................................................................25
System Installation Considerations .....................................................................................................25
Connection Tips ................................................................................................................................25
Component Guide
CAM6.6 Controller Rear Panel.......................................................................................................26-27
UNO Keypad OS Update Port ............................................................................................................28
UNO Keypad Rear Panel....................................................................................................................29
Wiring Instructions
Keypad Wiring ..................................................................................................................................30
Speaker Wiring .................................................................................................................................30
UNO-S2 IR Receiver Connection.........................................................................................................31
Keypad Installation
UNO Keypad Location ......................................................................................................................32
UNO Keypad Installation ....................................................................................................................32
Making Connections
UNO Keypad Port Connections ..........................................................................................................33
Source Audio Input Connections.........................................................................................................34
Source IR Input Connections ..............................................................................................................34
Common IR Input Connection.............................................................................................................35
3
Download from Www.Somanuals.com. All Manuals Search And Download.
TABLE OF CONTENTS
Speaker Connections ........................................................................................................................36
Zone Fixed/ Variable Audio Output ......................................................................................................37
12VDC Home Theater Trigger In/ Out..................................................................................................38
12VDC Mute Trigger In/ Out ...............................................................................................................39
RNET Link In/ Out ..............................................................................................................................40
RS-232 Interface ..............................................................................................................................41
AM/ FM Tuner Antennas.................................................................................................................42-44
Initial Install Test ...............................................................................................................................45
Programming
System Programming Overview.....................................................................................................46-47
Installation Menu
Installation Menu Overview.............................................................................................................48
Peripheral Setup ......................................................................................................................49-51
Source Setup ..........................................................................................................................51-57
Basic Setup ...........................................................................................................................51-53
Zone Setup ..................................................................................................................................58
Controller Setup.......................................................................................................................58-59
Power Management .................................................................................................................59-61
Learn IR.......................................................................................................................................61
Macro Editor............................................................................................................................62-63
System Info..................................................................................................................................63
Setup Menu Flow Charts...........................................................................................................64-76
Peripheral Setup: Memory Name, Bank Name..............................................................................64
Peripheral Setup: Controller ID, Region, Factory Init, System Info ..................................................65
Basic Setup...............................................................................................................................66
Key Configuration ......................................................................................................................67
Source Names/ Volume Trim .......................................................................................................68
Numeric IR ................................................................................................................................69
Source Select Command/ Number of Sources ..............................................................................70
Zone Setup ...............................................................................................................................71
Controller Setup.........................................................................................................................72
Power Management ...................................................................................................................73
Learn IR ....................................................................................................................................74
Macro Editor .............................................................................................................................75
System Info ...............................................................................................................................76
Keypad Diagnostics Menu .............................................................................................................77
REFERENCE SECTION
IR Device Code List ..........................................................................................................................78-81
IR Keycode List..............................................................................................................................82-103
Source Names .............................................................................................................................104-105
Source Information Form .....................................................................................................................106
Zone Information Form ........................................................................................................................107
Macro Editor Form..............................................................................................................................108
Sample Configurations..................................................................................................................109-112
Technical Specifications.......................................................................................................................113
Warranty ............................................................................................................................................114
4
Download from Www.Somanuals.com. All Manuals Search And Download.
PRODUCT INTRODUCTION
Thank you for choosing the Russound® CAM6.6 multisource, multizone controller to enhance your
home with distributed audio. This controller’s state-of-the-art features and components blend seam-
lessly with your unique lifestyle and preferences.
Besides distributing and controlling six audio sources to six rooms (zones) using RNET® keypads,
your CAM6.6 offers many features that increase your enjoyment of living. Here are several that you
may find particularly beneficial.
Favorites
These easy-to-set buttons make it possible to hear your favorite radio station or watch your favorite
satellite channel at just the right volume in your room with just a button push. The F1 and F2 preset
favorite buttons can be found on the SRC2 remote control, UNO-S2 keypad and UNO-TS2 touch-
screen. Want something new? Just re-save the Favorite with a new choice.
Party Mode
Ready to set the mood? In Party Mode, you just pick the source and the sound settings and hear the
music throughout all the rooms. The Master keypad simultaneously controls all the keypads in all the
rooms to effortlessly select or control the components. A great benefit of the Party Mode feature is
the ability to transfer the Master keypad mode to any keypad in the system. If the living room is the
center of the party, use that room’s keypad as Master. If the party moves to the sunroom and porch,
that room’s keypad can be set to Master instead.
Do Not Disturb
The Do Not Disturb setting prevents unwanted interruptions in your room and stops changes to your
selected audio source. You may have a nursery or study that you want to keep quiet, or maybe you
are watching a DVD and don’t want it interrupted. Simply set the Do Not Disturb mode to “on”
through the keypad’s User Menu, and be free from Party Mode interaction and system-wide functions
like “All On” or “All Off.”
Internal Source
The CAM6.6T includes an internal source - an AM/ FM tuner module. The tuner can store up to 36
favorites, or memory presets. These are stored in six groups (or banks) of six presets. Each preset
and each bank can be given a custom name of your choice.
Here at Russound we are proud to continue providing innovative and intuitive audio product solutions
to the world. When you link the industry-leading CAM6.6 with Russound’s commitment to its products
and customers, you have truly made – “the right connection.”
5
Download from Www.Somanuals.com. All Manuals Search And Download.
USER
COMPONENT GUIDE
CAM6.6 Controller-Front Panel
2
1
1
2
MAIN POWER SWITCH - Supplies power to the CAM6.6
ROOM LED ON/ OFF INDICATORS - Indicates when a room is on (green) or off (red)
Main Power and Zone Status
The power switch for the CAM6.6 controller is “on” in the up position. Any active
room (1-6) is indicated on the front of the controller by a green LED, which shows
red when the room is inactive. In most basic installations, all functions and room set-
tings are controlled through the corresponding UNO systems keypads.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
USER
COMPONENT GUIDE
UNO-S1 Keypad
1
2
102.5
6
5
3
4
1
2
LCD PANEL - 5-character backlit display shows status of the room, source,
volume, and more
SOURCE SELECT BUTTON - Scrolls through the sources directly connected to the
CAM6.6. Press and hold brings up the USER MENU for loudness, bass, treble, etc.
3
4
VOLUME UP/ DOWN BUTTONS - Raises and lowers the volume for the room
IR RECEIVER - Receives IR signals and passes them to the controller and source equip-
ment. Also used when operating the UNO Keypad by using the SRC2 remote
5
6
POWER BUTTON - Turns room ON or OFF when pressed once, press and hold a sec-
ond time will turn on or off all CAM6.6 rooms
COMMAND KEYS - Pressing the command keys controls the source equipment
(press)
(press and hold)
(press)
(press and hold)
7
Download from Www.Somanuals.com. All Manuals Search And Download.
USER
COMPONENT GUIDE
UNO-S2 Keypad
1
Command Keys
7
6
CD PLAYER 1
2
3
5
4
1
2
LCD PANEL - 12-character backlit display shows status of the room, source,
volume, and more
SOURCE SELECT BUTTON - Scrolls through the sources directly connected to the
CAM6.6. Press and hold brings up the USER MENU for loudness, bass, treble, etc.
3
4
VOLUME UP/ DOWN BUTTONS - Raises and lowers the volume for the room
IR RECEIVER - Receives IR signals and passes them to the controller and source equip-
ment. Also used when operating the UNO Keypad by using the SRC2 remote
5
6
COMMAND KEYS - Pressing the command keys controls the source equipment
POWER BUTTON - Turns room ON or OFF when pressed once, press and hold a sec-
ond time will turn on or off all CAM6.6 rooms
7
F1 AND F2 BUTTONS - Selects Favorite 1 or Favorite 2 - preset user-selected
favorite settings per room
8
Download from Www.Somanuals.com. All Manuals Search And Download.
USER
COMPONENT GUIDE
UNO-TS2 Touchscreen
1
2
10
9
3
4
5
8
7
6
1
2
IR RECEIVER - Receives IR signals and passes them to the controller and source equip-
ment. Also used when operating the touchscreen by using the SRC2 remote
TOUCHSCREEN - Full color resistive touchscreen with multi-sound feedback. Screen
can be programmed to go blank after a period of inactivity. Touching the screen any-
where reactivates it.
3
PLUS - Adjust setting for selected source
4
5
6
7
8
9
MINUS - Adjust setting for selected source
NEXT - Go to next selection for selected source
PREVIOUS - Go to previous selection for selected source
POWER - Turn room power on/ off. Press and hold for system all on/ all off
PAUSE - Pause/ mute for selected source
VOLUME DOWN - Adjust volume down for room controlled by touchscreen
VOLUME UP - Adjust volume up for room controlled by touchscreen
10
9
Download from Www.Somanuals.com. All Manuals Search And Download.
USER
COMPONENT GUIDE
SRC2 Remote Control
1
2
3
4
POWER - Turns room or Local Source on and
off.
11
10
1
2
RUSSOUND DEVICE BUTTON - Used for
SRC2 control of zone keypad.
NUMBER BUTTONS - Buttons (0-9) for direct
selection of channels or discs.
3
VOLUME UP/ DOWN - Raises and lowers the
volume for the room you are in, or for the
selected Local Device.
5
6
CURSOR KEYS - Issues IR commands for
source equipment, allowing movement
through menus and program screens.
9
4
5
COMMAND KEYS - Controls the selected
device (e.g., VCR, DVD, or CD player) with
these buttons.
7
SOURCE - Directly select sources connected to
the Russound controller while in the Russound
mode.
8
9
F1 AND F2 BUTTONS - Selects and saves
Favorite 1 or Favorite 2 preset selections.
INPUT - Scrolls through sources while in the
Russound mode, or switches inputs on
selected Local Source.
6
7
10
11
LOCAL DEVICE BUTTONS - Selects Local
Source to be controlled by SRC2.
8
SETUP - Use for programming SRC2 using
the built-in library or by learning-in codes.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
USER
OPERATION
UNO-S1 Keypad Button Function
Room On/ Off
Press and release
to turn on the UNO
used to enter the User Menu with a press and
hold action. (See next page for User Menu)
System Keypad. This also turns on the corre-
sponding CAM6.6’s room, and any presets previ-
ously assigned will be activated, including set-
tings for bass, volume, last source selected,
Volume Up/ Down Buttons
The room’s audio output is adjusted using
.
Command Keys
etc. Press and release
to turn off the UNO
The command keys
allow control of the
System Keypad. This will also put the corresponding
CAM6.6’s room into a standby state.
selected source at the UNO Keypad. The command
keys are activated with a press and release, or
press and hold to access secondary functions.
System All On/ Off
An “All On” command is issued by pressing
and holding for 3 seconds, from a keypad that
has been turned on. An “All Off” command can
be issued to all rooms by pressing and holding
after the room has been turned off.
System On Indicator
When the room is off, but the system is on in
another room,
is illuminated by a green
backlight and the "SYS ON" icon remains visible.
Source Select Button
scrolls through the six audio source inputs.
To change sources, press and release
. As
the sources are sequentially selected, each
source's name appears on the keypad LCD
panel. When a source is selected in more than
one room, the “SHARED” icon will appear on all
UNO Keypads using that source.
is also
11
Download from Www.Somanuals.com. All Manuals Search And Download.
USER
USER MENU SETTINGS
UNO-S1 User Menu Operation
The User Menu allows the user to adjust the
audio properties and control functions of a par-
ticular room.
Party Mode command from affecting this room.
When another UNO Systems Keypad selects the
same source, a DND message will scroll on the
the LCD panel, alerting the user the source is in
Do Not Disturb mode.
To enter or exit the User Menu, press and hold
during normal operation. The following keys
are used to navigate and make changes while
using the User Menu:
8. Party (Party Mode) - Master or Off
When in “PARTY MODE” the system is primarily
controlled by a “MASTER” Keypad. Party Mode
links all rooms to the same source which is
selected by the Master Keypad room. Any keypad
in the system can become a Master Keypad (if
enabled) but only one Master Keypad may exist at
a time in Party Mode. Selecting Master Keypad
mode from another keypad will transfer Master
Keypad control to that room and release it from
the first. When the source selected in the Master
Keypad room is changed then the source for all
rooms changes as well. The keypad will scroll a
PARTY message on the LCD panel. It will scroll a
MASTR message in lieu of PARTY if Master is
enabled.
Press and hold to adjust feature setting
(increment)
Press and hold to adjust feature setting
(decrement)
Go to next feature.
Go to previous feature.
View current feature setting.
UNO-S1 User Menu
Note: When within the UNO-S1 User Menu, if no
keys are pressed, the display will revert back to
its runtime display.
The following features make up the User Menu:
Bass
Treb
DND
Loud
Party
Bal
OnVol
Volume level changes at the Master Keypad will
be reflected in all rooms in Party Mode. Non-
Master rooms in Party Mode can temporarily over-
ride Master Keypad volume level adjustments for
their particular room preference. Master Keypad
will not change Bass, Treble, or Loudness adjust-
ments for any other rooms other than the Master
Keypad room. Every other keypad will still operate
its respective bass, treble, balance and loudness
adjustments for that room.
Bkgnd
Feature and Setting:
1. Bass -10 < Bass:Flat > +10
2. Treb (Treble) -10 < Treble:Flat > +10
3. Loud (Loudness) (more bass, fuller sound)
On or Off
4. Bal (Balance) Left 10 < Center > Right 10
5. OnVol (Turn on Volume) (default room volume
level) 0 to 100 (in steps of 2)
6. Bkgnd (Background Color) (keypad back-
ground light) Amber or Green or Off
7. DND (Do Not Disturb) - On or Off (default)
Do Not Disturb means do not disturb this room or
selected source. This stops pages from being
sent to this room, stops an “All Off," "All On" or
12
Download from Www.Somanuals.com. All Manuals Search And Download.
USER
OPERATION
UNO-S2 Keypad Button Function
Room On/ Off
Press and release
to turn on the UNO
used to enter the User Menu with a press and
hold action. (See next page for User Menu)
System Keypad. This also turns on the corre-
sponding CAM6.6’s room, and any presets previ-
ously assigned will be activated, including set-
tings for bass, volume, last source selected,
Volume Up/ Down Buttons
The room’s audio output is adjusted using
.
F1 and F2 Buttons
etc. Press and release
to turn off the UNO
The
and
buttons are user favorite pre-
System Keypad. This will also put the corresponding
CAM6.6’s room into a standby state.
sets. These presets can be selected at any time
to recall source selection, volume, and favorite
System All On/ Off
channel, disk, etc. To store a favorite preset: first,
adjust the room settings and select a source to be
An “All On” command is issued by pressing
and holding for 3 seconds, after an initial room
has been turned on. An “All Off” command can
be issued to all rooms by pressing and holding
after the room has been turned off.
stored. Next, press and hold the desired
or
button until SAVED is displayed on the LCD
panel. Now a press and release of the button will
recall the favorite preset. To set a favorite num-
System On Indicator
bered disk or channel, use
or
to select a
When the room is off, but the system is on in
disk or channel (e.g., channel 45). Wait for the
keypad to show the source name, then press
and hold the F1 or F2 within 15 seconds of set-
ting the numeric selection to save the setting.
another room,
is illuminated by a green
backlight and the "SYS ON" icon remains visible.
Source Select Button
scrolls through the six audio source inputs.
Command Keys
To change sources, press and release
. As
The command keys allow control of the selected
source at the UNO Keypad. The command keys are
activated with a press and release, or press and
hold to access secondary functions.
the sources are sequentially selected, each
source's name appears on the keypad LCD
panel. When a source is selected in more than
one room, the “SHARED” icon will appear on all
UNO Keypads using that source.
is also
13
Download from Www.Somanuals.com. All Manuals Search And Download.
USER
USER MENU SETTINGS
UNO-S2 User Menu Operation
The User Menu allows the user to adjust the
audio properties and control functions of a par-
ticular room.
7. DO NOT DSTRB - On or Off (default)
Do Not Disturb means do not disturb this room
or selected source. This stops pages from
being sent to this room, stops an “All Off," "All
On" or Party Mode command from affecting this
room.
When another UNO Systems Keypad selects the
same source, a DND icon will appear alerting
the user the source is in Do Not Disturb mode.
The following keys are used to navigate and
make changes while using the User Menu:
To enter the User Menu, press and hold
during normal operation. To exit the User Menu,
press and release
.
8. PARTY MODE - Master (Enable) or Off (Disable)
Adjust feature setting (increment).
Adjust feature setting (decrement).
Go to next feature.
When in “PARTY MODE” the system is primarily
controlled by a “MASTER” keypad. Party Mode
links all rooms to the same source which is
selected by the Master Keypad room. Any key-
pad in the system can become a Master keypad
(if enabled) but only one Master Keypad may
exist at a time in Party Mode. Selecting Master
keypad mode from another keypad will transfer
Master keypad control to that room and release
it from the first. When the source selected in the
Master keypad room is changed then the source
for all rooms changes as well.
Go to previous feature.
View current feature setting.
Note: When within the UNO-S2 User Menu, if no
keys are pressed, the display will revert back to
its runtime display.
The following features make up the User Menu:
BASS
TURN ON VOL
DSTRB
TREBLE
LOUDNESS
BG COLOR
BALANCE
DO NOT
Volume level changes at the Master Keypad will
be reflected in all rooms in Party Mode. Non-
Master rooms in Party Mode can temporarily
override Master Keypad volume level adjustments
for their particular room preference. F1 and F2
favorite presets selected from the Master Keypad
will be enabled in all rooms in Party Mode. Master
Keypad will not change Bass, Treble, or Loudness
adjustments for any other rooms other than the
Master Keypad room. Every other keypad will still
operate its respective bass, treble, balance and
loudness adjustments for that room.
PARTY MODE
Feature and Setting:
1. BASS
-10 < Bass:Flat > +10
2. TREBLE
-10 < Treble:Flat > +10
3. LOUDNESS (more bass, fuller sound)
On or Off
4. BALANCE
Left -10 < Center > Right +10
5. TURN ON VOL (default room volume level)
0 to 100
6. BG COLOR (keypad background light)
Amber or Green or Off
14
Download from Www.Somanuals.com. All Manuals Search And Download.
USER
OPERATION
UNO-TS2 Touchscreen Button Function
Room On/ Off
Source Select Button
To turn on the room and the touchscreen, touch
the UNO-TS2 screen anywhere, or press and
release the power button. Any presets previously
assigned will be activated, including settings for
bass, volume, last source selected, etc. Press
and release the power button to turn off the touch-
screen, and to put the room into a standby state.
The six buttons in the middle of the touch-
screen’s home page show the six assigned
names of the sources. To select a source, press
the button assigned to that source. To change
sources, return to the home screen and press
another source button. As the sources are
selected, each source's name appears on the
touchscreen’s LCD panel. When a source is
selected in more than one room, the “shared”
icon will be lit on all UNO Keypads using that
source.
System All On/ Off
An “All On” command is issued by pressing the
power button and holding for 3 seconds, after
an initial room has been turned on. An “All Off”
command can be issued to all rooms by press-
ing and holding the power button after the room
has been turned off.
Source Control Screens
As each source button is pressed, a different
screen appears that is customized to the
source. These source screens come in “sets”
which may have more than one screen per
source that provide source information and
selection options. In addition, the hard buttons
on the right side of the touchscreen have sec-
ondary functions that are indicated with text on
the specific source screens.
System On Indicator
When the room is off, but the system is on in
another room, the power button is illuminated by
a red backlight.
Volume Up/ Down Buttons
The room’s audio output is adjusted using the
volume up/ down hard buttons on the side of the
touchscreen.
F1 and F2 Buttons
The F1 and F2 buttons are user favorite presets.
These presets can be selected at any time to
recall source selection, volume, and favorite chan-
nel, disc, etc. To store a favorite preset: first,
adjust the room settings and select a source to be
stored. Next, press and hold either F1 or F2 until
“SAVED” is displayed on the LCD panel. Now a
press and release of the button will recall the
favorite preset. To set a favorite numbered disc or
channel, use Plus or Minus to select a disc or
channel from its source screen. Wait for the touch-
screen to show the source name, then press and
hold F1 or F2 within 15 seconds of setting the
numeric selection.
UNO-TS2 Home Screen
15
Download from Www.Somanuals.com. All Manuals Search And Download.
USER
USER MENU SETTINGS
UNO-TS2 - Setting Preferences
The Options button on the home screen brings up
room setting options and screen adjustments. (For
more detailed information, consult the UNO-TS2
Instruction Manual)
Options
Features
Turn On Volume - This sets the room’s default vol-
ume when the room is turned on.
Party Mode - When in “PARTY MODE” the system is
primarily controlled by a “MASTER” Keypad. Party Mode
links all rooms to the same source which is selected by
the Master Keypad room. Any keypad in the system can
become a Master Keypad (if enabled) but only one
Master Keypad may exist at a time in Party Mode.
Options screen
Do Not Disturb - Do Not Disturb means do not disturb
this room and selected source. This stops an “All Off" or
Party Mode command from affecting this room. When
another UNO Systems Keypad selects the same source,
a DND icon will appear alerting the user the source is in
Do Not Disturb mode.
Stream 3
Party Mode Off
Sound Control
Bass - Adjust the bass level for the room
Balance - Adjust the left-to-right speaker balance for
the room
Features screen
Treble - Adjust the treble for the room
Loudness - Turn loudness (more bass, fuller sound at
“low” volumes) on or off for the room. A checkmark
appears to indicate “Loudness” activation.
Treble:+2
Sound Control screen
16
Download from Www.Somanuals.com. All Manuals Search And Download.
USER
INTERNAL SOURCE - AM/ FM TUNER
UNO-S1 Keypad Control
through frequencies. The frequency will scroll
twice on the keypad then stop and display the
station’s first 5 characters.
UNO-S1 Keypad Control of Tuner
Selecting the tuner
On the UNO-S1 keypad, press
to select the
AM/ FM tuner by choosing the tuner’s preas-
signed source number (1).
Setting a Memory Preset
The SRC2 remote control is used to set memory
presets for all six banks. See page 22 for
details.
Selecting the desired frequency
Press and hold
or
to activate manual
or to scroll
tuning. Once active, press
102.5
1
2
1
2
TUNER SELECTION - Select
source number assigned to
AM/ FM Tuner (1)
FREQUENCY SELECTION -
Scrolls through frequencies
(press and hold, then press)
17
Download from Www.Somanuals.com. All Manuals Search And Download.
USER
INTERNAL SOURCE - AM/ FM TUNER
UNO-S2 Keypad Control
of six called banks, and there are six banks.
Each preset and each bank can be given a cus-
tom name of your choice.
UNO-S2 Keypad Control of Tuner
Selecting the tuner
On the UNO-S2 keypad, press
to select the
To select a bank, press and hold
for bank
AM/ FM tuner by choosing the tuner’s preas-
signed source number (1).
up or for bank down. The bank’s name will
be temporarily displayed on the UNO-S2. Banks
and memory presets are custom-named in the
Peripheral Setup Menu (see Installation Menu
section of this manual).
Selecting the desired band
Push
to toggle between AM band and FM
band reception.
Selecting the desired frequency
Setting a Memory Preset
Use
and
for manual tuning. The fre-
The SRC2 remote control is used to set memory
presets for all six banks. See page 22 for
details.
quency will appear on the keypad and the active
tuner. To move quickly through the stations,
press and hold either
1.5 seconds.
or
for more than
Recalling a Memory Preset
Press
and
to scroll through the memo-
Frequency Seek
ry presets for the selected bank. This procedure
will step through all of the presets in the current
bank, then loop back to start at the first one.
Only configured presets will be displayed.
A press on
will seek the next higher tune-
able station. If a tuneable station is not found,
end the SEEK function by pressing
Frequency Scan
again.
Mute
To scan, press and hold then release
. The
Press
to mute/unmute the tuner audio output.
tuner scans through tuned stations with a 5-sec-
ond preview before moving to the next station.
To end scanning, press
again.
Selecting a Bank
The AM/ FM tuner can store up to 36 favorites,
or memory presets. These are stored in groups
18
Download from Www.Somanuals.com. All Manuals Search And Download.
USER
INTERNAL SOURCE - AM/ FM TUNER
UNO-S2 Keypad Control
1
6
5
92.5 MHz FM
2
4
3
1
2
4
SCAN - (press and hold) Scans through tuned sta-
tions with 5-second preview before next station
TUNER SELECTION - Select source number
assigned to AM/ FM TUNER (1)
5
6
MUTE - Mutes/ unmutes tuner audio output
TUNE UP/ DOWN - Used for manual station
selection
BANK SELECT - (press and hold) Used for bank
selection
3
4
SELECT - Selects AM or FM band
6
MEM UP/ DOWN - (press) Scrolls through memory
preset stations
SEEK - (press) Seeks next higher tuned station
19
Download from Www.Somanuals.com. All Manuals Search And Download.
USER
INTERNAL SOURCE - AM/ FM TUNER
UNO-TS2 Touchscreen Control
screen. These will be selected from the bank
that is currently selected.
UNO-TS2 Control of Tuner
Selecting the tuner
Selecting the desired band
From the “2 of 3” tuner screen, press the “AM”
or “FM” button to select the desired band.
On the UNO-TS2 touchscreen home page, press
the named source button to select the AM/ FM
tuner.
Selecting the desired frequency
From the “2 of 3” tuner screen, enter the 3- or
4-digit frequency number. The “tune up/ down”
hard buttons can also be used to select a sta-
tion.
Selecting a Bank
From the “1 of 3” tuner screen, select the bank
by scrolling using the forward/ back arrow next
to the bank name. The bank name shows in the
window. There are six available banks that store
up to six presets each. Banks and memory pre-
sets are custom-named in the Peripheral Setup
Menu (see Installation Menu section of this
manual).
Frequency Seek and Scan
From the “3 of 3” tuner screen, select either the
“Seek” or “Scan “ button. Press the button to
begin the seek or scan function, then press the
“Stop” button on the screen to end. The “tune
up/ down” hard buttons can also be used to
select a station.
Setting a Memory Preset
From the “1 of 3” tuner screen, press the “tune”
up/ down hard button functions to select the
desired station. Press and hold one of the six
buttons in the middle of the screen to save the
preset. When you hear the harp sound from the
touchscreen, the preset is saved. The preset
name then appears on the buttons. These may
be custom names or frequencies.
Local - Distant Reception
From the “3 of 3” tuner screen, the
Local/ Distant Reception setting changes how
the tuner’s antenna picks up signals. Normal
operation is in Distant mode.However, in cities,
antennas can pick up multipath signals when
they bounce off buildings and get doubled. In
these cases, the Local mode limits the noise
associated with these reflected signals.
New presets can be saved over existing presets
using the same method.
Note: If the UNO-TS2 is powered on before the
Russound Tuner is turned on, existing preset
names may not appear until after the tuner’s
boot up procedure is complete (less than a
minute).
Stereo - Mono Output
From the “3 of 3” tuner screen, change the out-
put of a radio station by choosing either Stereo
or Mono.
Recalling a Memory Preset
Mute
From the “1 of 3” tuner screen, press and hold
one of the six buttons in the middle of the
screen to recall the preset. Only configured pre-
sets will be displayed.
Press the mute hard button on the outside left
of the UNO-TS2 to mute the tuner when it is the
selected source.
Presets can also be recalled from any tuner
screen by using the “memory up/ down” hard
button functions on the bottom right of the
20
Download from Www.Somanuals.com. All Manuals Search And Download.
USER
INTERNAL SOURCE - AM/ FM TUNER
UNO-TS2 Touchscreen Control
Banks and Memory Presets
Tuner 1
Example of Bank and Preset screen for
Russound Tuner
Dad’s Music
102.5 Class
WEEI 850
WBZ 1030
107.1 MHz FM
89.7 NHPR
105.7 Oldies
1 of 3
Numeric Station/ Channel Selection
Tuner 1
Example of numeric station selection
screen for Russound Tuner
2 of 3
AM/ FM Tuner Advanced Features
Example of AM/ FM tuner screen
107.1 MHz FM
3 of 3
21
Download from Www.Somanuals.com. All Manuals Search And Download.
USER
INTERNAL SOURCE - AM/ FM TUNER
SRC2 Remote Control
Frequency Scan
SRC2 Control of Tuner
Selecting the tuner
To scan, press and hold then release
. The
To select the tuner, push
to toggle through
tuner scans through tuned stations with a 5-second
preview before moving to the next station. To end
sources and choose the source number preassigned
to the AM/ FM tuner (1), or use the UNO numeric
source inputs at the bottom of the SRC2.
scanning, press
again.
Selecting a Bank
Selecting the desired band
To select a bank, press and hold
or for bank down.
for bank up
Push
to toggle between AM/ FM reception.
Selecting the desired frequency
Bank/ Memory Presets
The AM/ FM tuner has six banks of preset memory
settings, and each bank holds six presets for a total
of 36 possible presets.
Use the Channel
and
or
and
for manual tuning. To move quickly through the chan-
nels, press and hold the button for more than 1.5
seconds. To directly select a station, enter the three-
or four-digit channel or frequency (1071 for 107.1,
etc.). European regions use five-digit station
frequencies.
Setting a Memory Preset
1. Select a bank - press and hold
or
until the desired bank # (1-6) appears on the keypad.
2. Select a station - tune to the desired frequency
,
Frequency Seek
with
,
or
.
The SEEK function is performed by pressing and
3. Press and hold a # button (1-6) until M(#) SA(ved)
is displayed.
releasing the Select
or
or
. Press
. To seek
for
higher frequency station press
Recalling a Memory Preset
lower frequencies. Tuning begins at the current fre-
quency, seeks upward (or downward) and stops at the
Press
and
to scroll through a loop dis-
play of all the configured memory presets for the cur-
rently selected bank.
next tuned station. Pushing
or
again con-
tinues the SEEK function. Once the highest frequency
is reached, the tuner continues SEEK mode at the
lowest frequency.
Mute
Press the
button to mute/ unmute the tuner
audio output.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
USER
INTERNAL SOURCE - AM/ FM TUNER
SRC2 Remote Control
1
2
POWER - Power managed by CAM6.6
RUSSOUND SELECTION - “R” must be
the selected source for control of the
CAM6.6 and any connected compo-
nents. Select “R” before sending
SRC2 remote commands.
NUMERIC INPUT - (press) Number buttons for
direct input of frequency
2
3
MEMORY PRESETS - (press and hold) Number
buttons (1-6) for saving memory presets
TUNE UP/ DOWN - Incrementally scrolls through
channels or tuned stations
1
2
4
5
OK - Confirms numeric selection
PLAY - Selects AM or FM band
6
6
SCAN - (press and hold) Scans through tuned sta-
tions with 5-second preview before next station
SEEK UP/ DOWN - (press) Seeks next tuned
station up or down
7
MEM UP/ DOWN - (press) Scrolls through memory
presets for selected bank
11
10
7
8
BANK UP/ DOWN - (press and hold) Used for bank
selection
3
4
TUNER SELECTION - Select AM/ FM Tuner by its
assigned source number
3
5
9
PAUSE - Mutes/ unmutes tuner audio output
9
8
10
SEEK UP/ DOWN - Seeks next tuned station up or
down
6
7
11
TUNE UP/ DOWN - Incrementally scrolls through
tuned stations
23
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLER SECTION
Getting Started
Includes an installation overview, including tools needed and connection tips.
Component Guides
Reviews front and back panel features of the CAM6.6 controller and the UNO keypads.
Keypad Installation
Explains UNO keypad installation and wiring.
Making Connections
Details front and back panel connections of the controller and the keypads.
System Programming Overview
Outlines the programming planning process.
Installation Menu
Explains the programming menus that set up controller, keypad, source and zone operations.
Setup Menu Flow Charts
Presents the programming menus in a graphical flow chart format.
IR Device Codes
A list of controller’s IR device code library for source Device Code entries.
Key Function Codes
A list of IR codes for each command type contained in the built-in library.
Source Names
A list of Source Names available for assignment.
Setup Forms
A group of information forms to complete prior to programming
Sample Configurations
Diagrams of various configurations using CAM6.6s and other components.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLER
GETTING STARTED
Unpacking the System Components
• What system options and accessories
might be required for features such as local
sources, etc.?
• Keep the original carton and packing materials
for future shipment or storage.
• From where in each zone will the user prefer
to control the system? Where will the keypads
be located? Where will the speakers be located?
• Check for any visible signs of damage. If
you encounter any concealed damage, con-
sult your Russound dealer before proceeding
to install the unit.
• Where will the source equipment be located?
The CAM6.6 must have proper ventilation above
and below for air circulation and heat dissipation.
A rack-mount location may require fans and vents.
• Retain the sales receipt as it establishes the
duration of the limited warranty and provides
information for insurance purposes.
Connection Tips
Tools needed for installation:
• It is recommended that the CAM6.6 and the
source equipment be plugged into a dedicated
20-amp circuit with an isolated ground. A power
line conditioner can reduce interference prob-
lems caused by noise found in some electrical
systems.
• Drill with a 1/ 2” x 6” drill bit
• Keyhole saw
• Flat head screwdriver (medium size)
• Phillips Screwdriver (cordless recommended)
• 110 punchdown tool (included)
• Modular RJ-45 crimper and connectors
• Pair of diagonal cutters or wire strippers
• Stud finder
• Disconnect all live power cords before making
connections to the controller.
• Verify that all connections and polarity are
correct.
• Steel wire fish tape
• Keep all power cords away from all signal
cables to prevent humming from induced noise.
• Cable staples
• Choose reliable signal cables/ patch cords.
• Single-gang electrical work boxes
• Label all wires with room location at both ends
of the wire.
System Installation Considerations
There are several factors to consider before
installing the Russound CAM6.6 system:
• What are the intended listening zones?
CAUTION
Do not connect the controller's main power feed until all other connections have
been made and verified. Live connection or removal of the keypad wiring or other
wiring when the system is powered can cause communication problems in the
network. Double-check terminations during each phase of the installation to pre-
vent accidental damage. Incorrect wiring is the number one cause for non-war-
ranty product damage.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLER
COMPONENT GUIDE
CAM6.6 Controller-Rear Panel
1
2
3
4
5
6
7
8
9
10
11
CAM6.6
12
19
18
16
13
20
17
15
14
1
2
RNET LINK IN AND LINK OUT - Links multiple CAM6.6’s, also links future Russound
components that are RNET compatible
RS-232 INTERFACE - The RS-232 Interface allows the zones to be controlled by PC
or other devices that have an RS-232 Interface. The RS-232 Interface also allows for
firmware updates and programming.
3
4
5
6
AUX-MAIN RUN SWITCH - For firmware updates
UNO KEYPAD PORTS - One UNO Keypad Port for each of the six CAM6.6 Zones
12VDC TRIGGER OUT - 12VDC 100ma Trigger Out turns on when any zone is on
HOME THEATER 12VDC TRIGGER IN - 12VDC input jack notifies the CAM6.6 that
additional components are active, e.g., home theater equipment
MUTE 12VDC TRIGGER IN - Applying 12VDC to the Mute 12VDC Trigger In jack will
mute audio for assigned CAM6.6 Zones
7
8
9
MUTE 12VDC TRIGGER OUT - Mute Trigger Out supplies 12VDC 100 mA whenever
12VDC is applied to the Mute 12VDC Trigger In
IR LEARNING WINDOW - IR receiver for learning in IR commands with
confirmation LED
26
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLER
COMPONENT GUIDE
CAM6.6 Controller-Rear Panel
10
11
OPTIONAL INTERNAL SOURCE - Factory installed optional internal source, AM/ FM
radio module
AC 240V-AC 110V Switch - Switches A/ C input voltage between 110VAC and
240VAC
12
13
AC 120/ 240 INPUT - Grounded 3-terminal plug detachable power cord connection
for the CAM6.6
FUSE HOLDER - Holds a replaceable fuse for A/ C input connection
110VAC operation - F 3A H 250V, 240VAC operation; T 1.25A H 250V
14
SPEAKER OUTPUTS - Connect 8 Ohm speakers for each zone with detachable color-
coded modular snap connectors
15
16
AUDIO OUTPUTS - Audio line output connection
FIXED/ VARIABLE SWITCH - Change line out between fixed and variable output.
COMMON IR OUTPUT - Output jack will pass all IR signals from all keypads
17
18
SOURCE IR OUTPUTS - Six source-specific IR Output jacks allow for IR control of
source equipment
19
20
AUDIO INPUTS - Six sets of Audio Line Level input connections for CAM6.6 source
components
OUTPUT/INPUT SWITCH - Enable Source Input 1 or enables Internal Source 1 output
27
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLER
COMPONENT GUIDE
UNO Keypad Update Port
Software Update
Required Russound Cable for Programming
If a keypad update is released, it will be available
online at www.russound.com through the Document
Center, under RNET Systems. Before starting the
update procedure, download updates to a PC and con-
nect the correct programming cable from the PC to
the OS update port on the front of the keypad.
UNO-S2, UNO-TS2
- use Programming Cable P/ N 2500-121036
UNO-S1
- use Advanced Programming Cable P/ N 2500-521065
(Do not put RS-232 level signals into the pins)
2
4
1
UNO-S2 Keypad
OS Update Port
UNO-S1 Keypad
3
1
OS Update Port
1
2
OS UPDATE PORT- Connection for programming
cable used to update UNO keypad OS software.
SETUP BUTTON - Activates Installer Setup mode
and accesses update menus
3
4
RESET BUTTON - Resets UNO-TS2 after update
OS UPDATE/ RUN JUMPER - Pins are jumpered
during OS update, and removed during normal
operation.
UNO-TS2 Touchscreen
28
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLER
COMPONENT GUIDE
UNO Keypad-Rear Panel
2
3
NEWMARKET, NH U.S.A.
UNO-S1
System Control Keypad
4
4
1
UNO-S1
UNO-S2
RNET
4
NEWMARKET, NH USA
+12V
+12V BR/W
GND GR
STATUS IN GR/W
GND OR
IR OUT OR/W
COM A BL
COM B BL/W
BR
UNO-TS2
EXTERNAL IR
RECEIVER IN
3
DESIGNED IN USA MADE IN KOREA
1
UNO-TS2
1
2
EXTERNAL IR RECEIVER IN CONNECTOR - Connection for an external IR Receiver
OS UPDATE JUMPER - Selects mode “Run” (one pin covered) or “OS Update” (two pins covered).
Jumper setting must be in “Run” position for keypad operation.
3
4
RESET BUTTON - (UNO-S2) Reset whenever changing from RUN to OS update
(UNO-TS2) Reset after touchscreen firmare update
110 PUNCHDOWN CONNECTOR - Termination for CAT-5 connection between the UNO Keypad
and the CAM6.6 controller
29
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLER
WIRING INSTRUCTIONS
Wire Length
• Avoid locations concealing pipes, heating
ducts and AC wiring in the general vicinity.
To determine the amount of CAT-5 wire required
for the system installation, first decide how
many keypads will be used, then determine the
distance between each intended keypad location
to the intended CAM6.6 location. The maximum
recommended wire run length is 250 feet for
each UNO keypad.
• Avoid running wires close to house electri-
cal wiring for any distance. If you have to run
them parallel, make sure to space the wires
at least two feet from the AC line.
Keypad Wiring
For the UNO keypad or touchscreen, the follow-
ing connections are used to terminate the CAT-5
wire to the 110 punchdown on the keypad:
• Make sure that the entire wire path
between keypads and CAM6.6 is clear and
not obstructed by a floor ceiling joist, or
masonry wall which can’t be drilled through.
CAT-5 WIRE COLOR
TYPE
• Confirm ahead of time that you can drill an
outlet hole easily and in an unobtrusive spot
to connect wires with the CAM6.6.
Brown . . . . . . . . . . . . . . . . . . . +12V
Brown/ White . . . . . . . . . . . . . . +12V
Green . . . . . . . . . . . . . . . . . . Ground
Green/ White . . . . . . . . . . . . Status In
Orange . . . . . . . . . . . . . . . . . Ground
Orange/ White . . . . . . . . . . . . . IR Out
Blue . . . . . . . . . . . . . . . . . . . COM A
Blue/ White . . . . . . . . . . . . . . COM B
• Label wires with keypad and room location.
This simplifies CAM6.6 hook-up once the key-
pads and speakers are installed.
RJ-45 Connections
The CAT-5 T568A wiring standard shown below
is used for the RJ-45 terminations.
CAT-5 110 Punchdown Connection
The UNO keypad 110-punchdown terminal
requires the use of a punchdown tool. Attach the
CAT-5 cable to the 110 punchdown terminal on
the UNO keypad, matching the conductor colors
to the connection color guide. The keypad will
not operate properly if the terminations deviate
from the required connection order.
Caution
Take care when using an impact 110 punchdown
tool, as this may overspread the contact points.
Use of the impact tool may propel stray bits of wire
and jacket into the keypad’s chassis and possibly
cause a short in the circuitry. Gently shake or blow
air through the keypad chassis to remove stray wire
before the keypad is installed into the junction box.
Speaker Wiring
Standard 16-gauge 4-conductor stranded speak-
er wire can be run up to to 125 feet; 14-gauge
wire can be run up to 250 feet.
When running wire, pay particular attention to
the following areas:
30
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLER
WIRING INSTRUCTIONS
IR Receiver Connection
The UNO-S2 keypad has an External IR Receiver
IN terminal for connecting an external IR receiv-
er such as the Russound SaphIR 858, 862 Eye,
or 860 Phantom. Use 2 twisted pair wire with
one pair connecting GND (GROUND) and IR (SIG-
NAL) and the other pair connecting ST (STATUS)
and V+ (+12VDC). If the wire has a shield, con-
nect it to ground at the UNO-S2 only.
Back of
Russound 858
Back of
UNO-S2
31
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLER
UNO KEYPAD INSTALLATION
Keypad Location
The best infrared remote performance is achieved
with the keypad away from any direct sunlight,
plasma TV, and low voltage lighting controls. Also
consider convenience when choosing a location.
• Route CAT-5 wire to the junction box from the
CAM6.6.
• Use the supplied 110 punchdown tool to
connect each wire to its corresponding color
labeled on the punchdown terminal.
Choose a place that is easily seen from the posi-
tion where a person is most likely to be located.
• Ensure jumper settings on keypads are in the
run positions.
Check whether or not you can route the wire to
the location you have chosen.
• Mount the keypad in the electrical box and
attach the back plate then the cover plate.
Keypad Installation
• Repeat the steps until all keypads are
installed.
An UNO keypad has three parts: the keypad, a
back plate and a cover plate. To install an UNO
keypad, use a UL/ CSA approved plastic electri-
cal box. Use a double-gang box for UNO-S2 and
UNO-TS2. For UNO-S1, use a single-gang box.
Src 3
Junction Box
UNO-S1
Back Plate
Cover Plate
32
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLER
MAKING CONNECTIONS
UNO Keypad Port Connection
The UNO System Keypad Ports are located on
the back of the CAM6.6 in the top left of center.
Connections made at the UNO Keypad Ports are
made using CAT-5 T568A RJ-45 wire configura-
tion. CAT-5 is color-coded for ease of installa-
tion. For a clean installation when wiring from an
UNO System Keypad Port use an RJ-45 CAT-5
patch cable to connect from the keypad port to
an RJ-45 Wall Plate (optional). Using the same
CAT-5 T568A RJ-45 wiring configuration, use
CAT-5 from the RJ-45 Wall Plate to the keypad.
If using more than one keypad on a zone, con-
nect a SA-ZX3 UNO System Keypad Splitter
(optional) directly to the UNO System Keypad
Port instead of going through the wall plate.
Always use the CAT-5 T568A RJ-45 wire configu-
ration when wiring any of the UNO System
Keypad Ports.
CAM6.6
CAT-5 Cable
CAM6.6T
CAT-5 Cable
PM Mod 3D
with RJ-45
CAT-5 Cable
SA-ZX3
1201A/1A
Power
Supply
33
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLER
MAKING CONNECTIONS
Source Audio and IR Input Connections
Source Audio Connections
Note for CAM6.6T: If you hear more than one
source when Source 1 is selected, recheck
Source 1 wiring and switch setting.
The CAM6.6 supports up to six audio sources.
The Source Inputs are located at the back panel.
For the CAM6.6 (no internal source installed), the
switch next to Source 1 input must be set to
“Input.” Connect each source output using quality
RCA signal cables. Connect the Left and Right
Audio outputs from each source to the correspon-
ding inputs on the CAM6.6 controller. Label each
cable with the name of the selected source and
the Source Audio input number located on the
CAM6.6.
Source IR Connections
Each source component has a designated IR
port on the back of the CAM6.6. This IR port is
directly above the Source Audio Input
Connections.
1. Using an IR emitter (the Russound 845.1 is
recommended) attach the end of the emitter
”
with the 1/ 8 plug to the IR emitter port above
the source input.
For the CAM6.6T, the Source 1 input serves a
dual purpose. If the CAM6.6 optional internal
source is used, the Source 1 input is not avail-
able, and the switch next to it is set to “Internal
Source Output.” If you want to utilize the Source
1 inputs, set the switch to “Input” and reconfigure
Source 1 in the Source Setup menu.
2. Remove the adhesive back at the other end
of the emitter and attach the emitter over the
source component’s IR window.
3. In order to control this source component
with IR, the source must be selected at the
keypad receiving the command.
CAM6.6
Use the
Source 1 out-
put/ input
switch for
audio OUT of
the internal
CD Changer
source or
audio IN of
connected
source
equipment.
Tape Player
CAM6.6T with Optional Internal Source - AM/ FM Tuner
34
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLER
MAKING CONNECTIONS
Common IR Connection
Common IR Connections
IR emitter with a 1/ 8’’ plug. The Russound
845.1 single IR emitter is recommended, or use
an IR connecting block such as the Russound
857 which allows multiple units to be controlled
through the COM IR Port.
The Common IR jack on the rear of the CAM6.6
allows control of any source equipment without
that source being selected on the keypad. The
connection for the COM IR jack is made using an
CAM6.6
CAM6.6
STATUS
Alternate configuration
+
12VDC
IR emitters to
source equipment
using 857 IR connecting block
POWER
+
12VDC
IR RECEIVER
IN
IR COMMON
IN
+12VDC
GND
STATUS
SIGNAL
DESIGNED IN USA MADE IN KOREA
35
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLER
MAKING CONNECTIONS
Speaker Connections
The speakers are connected to the CAM6.6
using modular snap connectors. Each of these
color-coded connectors is designated for the
speaker set of a particular amplified zone. To
avoid confusion, connect one zone speaker set
at a time starting with Zone 1, taking care to
keep zone and speaker wire identities straight.
Note: An 8 Ohm minimum speaker is required
for each amplified output.
WHITE -- L+ (left channel positive)
GREEN -- L- (left channel negative)
BLACK -- R- (right channel negative)
RED -- R+ (right channel positive)
Lift the black lever for each connection until it
locks open and insert the proper speaker
wire, matching channel and polarity for all
four wires. Snap the lever down. Insert the
modular connector into its designated output
on the back of the CAM6.6.
1. Pull the speaker wire conductors apart so
they’re separated for the first two inches from
their ends.
4. Complete the same steps for the remaining
zones. Label each set of speaker wires with
the zone and location.
2. Using a wire stripper, remove 1/ 4 inch of
insulation from each conductor. Twist the
strands in each conductor into tight spirals.
3. Remove the modular four-color connector for
Zone 1. The color code is as follows:
CAM6.6
36
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLER
MAKING CONNECTIONS
Zone Fixed/ Variable Audio Outputs
The CAM6.6 has two Zone Audio outputs, on
Zone 1 and Zone 2. Each of these zone audio
output connections features a stereo line out
RCA connection plus a switch to allow for either
a fixed or a variable line level output.
The fixed or variable audio outputs can be used
if additional amplification is desired (e.g.,
Russound R235LS two-channel amplifier). Use
quality RCA signal cables to ensure a constant
quality audio signal.
When set to Variable, the keypad volume level
affects this output. In the Fixed position, the key-
pad volume level will not change the output level.
CAM6.6
37
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLER
MAKING CONNECTIONS
12VDC Home Theater Trigger In/ Out
12VDC Home Theater Trigger In
12VDC 100mA Trigger Out
This 12VDC Trigger input is used to control
Power Management of the audio sources possibly
being shared with a home theater system. When
the last zone on the CAM6.6 is turned off, 12VDC
presence to the trigger input will prevent the
sources that are on from being turned off. The
connections for the trigger are made using a two-
conductor cable with 1/8” male mini-plug. The tip
is positive (+) and the sleeve is negative (-).
The 12VDC 100mA trigger out can be used to
engage any 12VDC trigger device or component
such as the Russound ACT-1 triggered outlet.
The connections for the trigger out are made
using a two-conductor cable with 1/ 8” male
mini-plug jacks at each end. The tip is positive
(+) and sleeve is negative (-).
CAM6.6
38
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLER
MAKING CONNECTIONS
12VDC Mute Trigger In/ Out
12VDC Mute Trigger In
12VDC Mute Trigger Out
When 12VDC is applied to the Mute Trigger In,
the system will fully mute any source that is con-
nected to the Source Audio Input. The connec-
tions for the trigger are made using a two-con-
ductor cable with 1/ 8” male mini-plug jacks. The
tip is positive (+) and sleeve is negative (-). This
allows for the connection of an external paging
or muting device. The CAM6.6 can be pro-
grammed to mute audio for one or all zones as
preferred when the 12VDC is applied.
Mute Trigger Out 12VDC output is used for trig-
gering an external amplifier, muting device or
other paging component dependent on the Mute
Trigger In 12VDC. The connections for the out-
put are made using a two-conductor cable with
1/ 8” male mini-plug jacks at each end. The tip is
positive (+) and sleeve is negative (-). The
default setting for the Mute Trigger Out provides
12VDC whenever 12VDC is applied to the Mute
Trigger In.
CAM6.6
Doorbell Interface
39
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLER
MAKING CONNECTIONS
RNET Link In and Link Out
The RNET Link In and Link Out can be used to
connect two to six CAM6.6 or CAV6.6 con-
trollers. The connection is made using a CAT-5
patch cable from the Link Out of the master
CAM6.6 and into the Link In of the next con-
troller. Along with RNET data signals, the RNET
Link In and Link Out jack passes the six source
IR signals. These are only for source-specific IR
remote repeating, not codes initiated from the
controller’s internal IR library. The CAT-5 patch
cable should not exceed 18 inches in length to
avoid potential cross-talk between the source-
specific IR repeating signal lines.
Note: If two or more CAM6.6 or CAV6.6 con-
trollers are connected using the RNET Link In
and Link Out ports, each controller must have a
unique Controller ID prior to being connected
through the RNET ports. The Controller ID
assignment must be performed during the
Controller Setup section of the Installation menu.
If using a CAM6.6T, be sure to set the Controller
ID under “Peripheral Setup” to “ALL CON-
TROLLERS” (page 50).
Note: It is not recommended to link together
two CAM6.6T controllers. If designing a CAM6.6
system with more then one tuner, use two
CAM6.6 controllers and a Russound ST2 Dual
Tuner (also ST2-XM, ST2-XM2, ST2S). See page
The RNET Link In and Link Out is also used to
connect the CAM6.6 to other Russound prod-
ucts with RNET.
CAM6.6 (Controller ID 1)
CAM6.6
CAV6.6 (Controller ID 2)
40
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLER
MAKING CONNECTIONS
RS-232 Interface
The CAM6.6 supports RS-232 communication
with various third party automation systems or
PC for programming of the controller.
For RS-232 protocol and the backup PC applica-
tion, go to www.russound.com, Document
Center. Under RNET Systems, look under the
heading for Technical Documents.
The RS-232 com port is located on the back of
the CAM6.6 and uses a DB-9 cable connection.
CAM6.6
INTERFACE
DB9 Cable
41
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLER
MAKING CONNECTIONS
Optional Internal Source - AM/ FM Tuner Antennas
AM Antenna
FM Antenna
Connect the included loop antenna for AM recep- Attach the included FM antenna for FM reception
tion to the Optional Internal Source panel, attach- to the Optional Internal Source panel by pushing
ing the GND (ground) and AM ends to the appro-
priately marked connections.
the F-type quick-connect termination of the anten-
na onto the FM connection.
CAM6.6
42
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLER
MAKING CONNECTIONS
Optional Internal Source - AM/ FM Tuner Antennas
Connecting an Alternate Outdoor Antenna
for AM/ FM
for AM reception. Use a 75-ohm to 300-ohm
balun at the AM connection on the tuner, and
attach the 75-ohm coax cable to the balun.
The diagram below depicts a suggested installa-
tion option of an alternate outdoor FM antenna
and AM antenna.
For best performance for FM reception, it is rec-
ommended to use an external outdoor or attic-
mounted antenna. Attach the desired length of
75-ohm coax cable directly to the FM connection
on the tuner.
For best performance for AM reception, it is rec-
ommended to use an external outdoor or attic-
mounted long wire antenna for best performance
300 ohm
to 75 ohm
balun
CAM6.6
43
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLER
MAKING CONNECTIONS
Grounding Outdoor Antennas
Antenna
Lead In Wire
Electric
Service
Equipment
Grounding
Conductors
Power Service
Grounding
Electrode System
Ground
Clamps
Grounding an Outdoor Antenna
The diagram above gives a general depiction of
how an outdoor antenna should be grounded. For
complete guidelines on antenna grounding proce-
dures, please consult the National Electrical
Code, Section 810, ANSI/ NFPA No. 70-1984.
If the tuner is used with an outdoor antenna, the
antenna must be grounded against static
charges and voltage surges. Consult the instruc-
tions that came with the antenna or contact the
antenna manufacturer for proper installation
instructions.
44
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLER
INITIAL INSTALL TEST
Before proceeding to the system programming section, it’s important to conduct an initial test to
determine that the hardware components are working properly.
1. Connect the speaker wires from Zone #3 to the CAM6.6 Zone #3 speaker output connectors.
2. Connect an UNO keypad to Keypad Port #3 on the rear of the CAM6.6.
3. Connect a source to the Source #3 Input on the CAM6.6 using RCA Audio patch cables.
4. Plug a supplied 845.1 IR emitter into the Source #3 IR Output Jack and adhere the emitter end
to the source equipment’s IR window.
5. Plug in the main power cords for the CAM6.6 and the source.
6. Turn on the main power switch on the CAM6.6 and the source.
7. Manually command the source to provide audio or use the source remote control.
8. Press the power button on the UNO keypad and select Source #3.
9. To verify emitter placement, take source equipment’s factory remote control and aim at a key-
pad (not in same room as source equipment). Source equipment should respond to IR command.
Congratulations – you should now hear the source through the speakers in Zone #3.
If there is no sound, follow these diagnostic steps:
1. Check the source to see that it is operating properly.
2. Check the RCA Audio cable connections from the source to the Source #3 Input on the
CAM6.6.
3. Check the speaker connections and verify that they are correct and are connected to the
Zone #3 speaker outputs.
4. Check to see that the keypad is connected to the Zone #3 Keypad Port and verify the CAT-5 is
properly terminated at both ends.
If none of these steps produce successful results, call Russound Tech Support for further assistance.
45
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLER
SYSTEM PROGRAMMING OVERVIEW
This manual includes items that are designed to assist in the programming process.
Forms (Pages 106-108)
Three blank reproducible forms are included as planning tools when determining sources, settings
and zone preferences. The Source and Zone Information forms and the Macro Editor form should be
completed before programming and referred to during the installation menu process. This speeds up
programming time and reduces missed or incorrect entries. These forms also serve as system refer-
ence documents if future troubleshooting is needed.
IR Device Codes (Pages 78-81)
This list of command type IR device codes reflects the built-in IR codes in the CAM6.6 library. During
programming, these codes will be entered for each source at the “Device Code” prompt. If a code is
not listed for a source, the Learn IR procedure is available to learn in and centrally store IR codes.
(Note: Device codes for Phono, DAT and Tape are Learned Only)
Key Functions (Pages 82-103)
This list of key functions identifies what IR codes are supported for each command type (source) by
the built-in library. “Learned Only” indicates that this function is not supported and must be learned
into the CAM6.6. This list of key functions reflects the different available key functions associated
with what you see on the LCD panel when performing the Key Configuration procedure in the
Installation Menu. The list of functions corresponds with the command types above (e.g., CD, DSS,
etc.).
Source Names (Pages 104-105)
A list of assignable Source Names is provided for advance selection and source form completion
before programming.
Flow Charts (Pages 64-76)
Installation Menu flow charts provide a graphical representation of the programming process.
Installation Menu (Pages 49-63)
The Installation Menu provides the step-by-step complete programming procedure for the keypad and
the controller.
Although you can begin programming at any point within the Installation Menu, the following sequence
is recommended for initial installations, as it progresses from the most basic requirements to the
more advanced features.
1. Controller Setup (CTRLR SETUP) (Page 58-59)
This procedure sets the controller ID number within the system. This number must be manually set
when multiple CAM6.6’s are linked through RNET within one system. This procedure is not necessary
for systems with only one CAM6.6.
2. Number of Sources (# of Sources/ SOURCE SETUP) (Page 57)
This procedure sets the number of sources used in the system. This prevents the user from selecting
a source input that is not used.
46
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLER
SYSTEM PROGRAMMING OVERVIEW
3. Basic Setup (SOURCE SETUP) (Pages 51-53)
This procedure is mandatory to set up each source for keypad source control and is the cornerstone
of the programming process.
4. Peripheral Setup (Pages 49-51) (FOR OPTIONAL INTERNAL SOURCE)
This procedure provides setup and naming procedures for the tuner. It includes assigning a custom
name to a memory preset or bank, and choosing a region for AM/ FM operation (US or Euro).
5. Learn IR (Page 61)
This procedure is used when the source-specific IR code is not found in the built-in IR code library.
This allows IR commands to be learned into the system and centrally stored.
6. Macro Editor (Pages 62-63)
This procedure compiles multiple IR keycodes to be initiated by a single button press. One macro can
have up to 10 commands, including other macros, and up to 132 macros can be entered.
7. Source Volume Trim (SOURCE SETUP) (Page 54)
This procedure matches audio output signals for all sources for seamless switching.
8. Numeric IR (SOURCE SETUP) (Pages 54-56)
This procedure sets up control of a source that supports direct numeric commands.
9. Key Configuration (SOURCE SETUP) (Pages 53-54)
This procedure customizes individual key functions on a per-zone basis for source control.
10. Power Management (Pages 59-61)
This function incorporates IR macro commands to automatically control the power state of the sources
when the system is in use or when a home theater is sharing sources.
11. Zone Volume Trim (ZONE SETUP) (Page 58)
This procedure limits the maximum volume allowed in a zone, regardless of keypad volume adjust-
ment.
12. System On Enable (SYSON ENABLE/ ZONE SETUP) (Page 58)
This feature allows a zone to join or opt out of an “all on” command.
13. Party Enable (ZONE SETUP) (Page 58)
This feature allows a zone to join or opt out of Party Mode participation.
14. Master Enable (ZONE SETUP) (Page 58)
This feature allows a zone the option of becoming a Master keypad in Party Mode.
15. Mute Enable (ZONE SETUP) (Page 58)
This feature allows a zone to allow or mute audio.
47
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLER
INSTALLATION MENU OVERVIEW
There are three item types in the installation menu:
Menu –
“Folder” that holds procedures and/ or feature options.
Procedure –
Feature –
A series of steps to perform a guided operation, such as configuring a button.
The actual settings that will change the system configuration.
The following UNO-S1 and UNO-S2 buttons are used to navigate and make selections while using
the installation menus. The UNO-TS2 does not support access to the Installation Menu.
Button Function
UNO-S1 UNO-S2
Setup button (located under cover plate on the keypad’s right side) - Press
and release while in normal operating mode to enter the Installation Menu.
Press to back out of any procedure and return to beginning of Installation
Menu, then to normal operating mode.
Adjust feature setting (increment)
Adjust feature setting (decrement)
Go to next menu / procedure / feature. Not available while performing a pro-
cedure
Go to previous menu / procedure / feature. Not available while performing a
procedure
Enter menu / begin procedure / show current feature setting. While perform-
ing a procedure, it is also used to advance to the next sequential feature
setting once the current feature has been viewed or adjusted.
UNO-S1 Keypad Five-character Display
The UNO-S1 keypad abbreviates information as necessary to appear in its five-character display.
In the following menu procedures, the UNO-S1 five-character abbreviation is shown in parentheses
underneath the 12-character version.
48
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLER
INSTALLATION MENU
The following items make up the Installation Menu:
PERIPH SETUP (P e r Su)
CTRLR SETUP (CtlSu)
MACRO EDITOR (MacEd)
SOURCE SETUP (SrcSu)
ZONE SETUP (ZonSu)
POWER MGT (PwMgt)
SYSTEM INFO (SInfo)
LEARN IR (LrnIR)
PERIPH SETUP (PerSu)
Note: For CAM6.6, Peripheral Setup is not applicable. “Not Avail” shows on the keypad.
Peripheral Setup allows the CAM6.6’s optional internal source to be configured.
The following items can be found in the PERIPH SETUP menu:
MEM NAME (MemNm)
FACTORY INIT (FInit)
BANK NAME (BnkNm)
SYSTEM INFO (SInfo)
CONTROLLR ID (CtlId)
REGION (Rgion)
MEM NAME (MemNm)
NOTE: A memory preset must be created and saved before it can be named. Once it is saved, the
preset’s Tuner #, Bank # and Memory # must be entered in the following procedure.
This procedure accesses a name entry field to enter a custom name for a memory preset. See
Periph Setup - Flow Chart on page 64
1. BANK # –
Select the BANK # of the memory preset.
(Bank#)
2. MEMORY # –
Select the MEMORY # of the preset to be named.
(Mem #)
3. MEMORY NAME –
Use the volume up/ down keys to select a character and left/ right
keys to change a character position. A blinking cursor indicates
placement of the character being entered. Names can be from 1
to 5 characters in length. If adding names from 6-12 characters,
it is suggested you use an optional UNO-S2 keypad.
(MemNm)
BANK NAME (BnkNm)
This procedure accesses a name entry field to enter a custom name for each of the tuner’s six
banks. See Periph Setup - Flow Chart on page 64
1. BANK # –
Select the BANK # of the memory preset.
(Bank#)
(continued)
49
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLER
INSTALLATION MENU
2. BANK NAME –
Use the volume up/ down keys to select a character and left/ right
keys to change a character position. A blinking cursor indicates
placement of the character being entered. Names can be from 1
to 5 characters in length. If adding names from 6-12 characters,
it is suggested you use an optional UNO-S2 keypad.
(BnkNm)
CONTROLLR ID (CtlId)
This procedure is used to identify the controller(s) that the tuner will respond to. See Periph Setup -
Flow Chart on page 65
1. Controller:# –
Select controller ID of controller that will control the tuner.
Select if all controllers in the system can control the tuner.
(CtlId)
2. All controllers –
(All)
REGION (Rgion)
This procedure assigns either US or Euro frequency display to the tuner. The difference between the
two is that US FM frequencies operate in .2 MHz increments, while European FM frequencies operate
in .05 MHz increments. See Periph Setup - Flow Chart on page 65
1. US –
Select US for US FM frequency display.
(US)
2. EURO –
Select EURO for EURO FM frequency display.
(Euro)
FACTORY INIT (FInit)
NOTE: This procedure returns the tuner to its factory settings and erases all user settings.
This procedure allows the erasure of all programmed settings and returns them to the factory default
settings. See Periph Setup - Flow Chart on page 65
1. Are you sure? –
Confirmation of YES or NO is required to proceed. A NO
selection returns to the top of the Factory Initialization menu.
A YES selection begins the initialization.
(Sure?)
2. Please Wait –
Message shows during the initialization process.
3. Cycle Power –
When initialization is complete, cycle power to the unit.
50
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLER
INSTALLATION MENU
SYSTEM INFO (SInfo)
System Info shows the tuner’s manufacturing build properties. See Periph Setup - Flow Chart on
page 65
BUILD TIME (BTime)
BUILD DATE (BDate)
VERSION (Ver)
1. BUILD TIME
Displays the firmware Build Time of the tuner.
Displays the firmware Build Date of the tuner.
Displays the firmware version of the tuner.
(BTime)
2. BUILD DATE
(BDate)
3. VERSION
(Ver)
SOURCE SETUP (SrcSu)
Source Setup allows the system’s sources to be configured.
The following items can be found in the SOURCE SETUP menu:
BASIC SETUP (BasSu)
SRC VOL TRIM (SrcVT)
# OF SOURCES (#Srcs)
KEY CONFIG (KeyCf)
NUMERIC IR (NumIR)
SOURCE NAMES (SrcNm)
SRC SEL CMD (SrcSC)
BASIC SETUP (BasSu)
NOTE: The BASIC SETUP procedure should be performed for each source before proceeding to other
source setting changes.
Note: If the CAM6.6 has an optional internal source installed, it is pre-configured as Source 1, with
source name Tuner and command type Peripheral.
This procedure uses built-in source “templates” to quickly and easily configure the source settings
needed for basic operation of the source component. Before performing BASIC SETUP, connect the
source components to the CAM6.6 as outlined in the Source Connections section. Also be sure that
all sources are powered on. See Basic Setup - Flow Chart on page 66
1. SOURCE NUM –
Select the source to be configured.
(Src #)
(continued)
51
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLER
INSTALLATION MENU
2. SOURCE NAME –
Select the name for the source (e.g., DVD, Aux 2, Jazz, etc.).
(Name)
3. COMMAND TYPE –
Select the type of command template (e.g., CD, TV, etc.). Selecting
the command type template will tell the CAM 6.6 how to configure the
key’s command and text for the source component.
(CmdTp)
a. Selected: Learned IR
Choose Learned IR if the pre-programmed IR code library does
not support the source component.
(LrnIR)
i. LEARNED SRC –
(LnSrc)
Select the learned source bank to be assigned to the source
component. (See Learning IR procedure for instructions on how
to learn IR codes.)
ii. TEMPLATE TYP –
Select the template type to define what type of source compo-
nent is being used. (This will tell the CAM6.6 how to configure
the key commands and text for the source component if it is a
learned source.) Procedure advances to USE NUM IR? (step 7).
(TType)
b. Selected: Unassigned
The template for the selected source is cleared. (All key
assignments and other source settings will be erased.)
Procedure advances to SAVE CHANGES (step 10)
(Unasg)
c. All Other Selections:
Procedure advances to DEVICE CODE (step 4)
4. DEVICE CODE –
Enter source component code number listed in this manual’s
Reference section.
(DevCd)
5. TEST IR? –
If “Yes” is selected, the CAM6.6 sends a power command to the
source component. If “No” is selected, the procedure advances
to USE NUM IR? (step 7)
(TstIR)
6. SUCCESS? –
If the power to the source component was turned off, select
“Yes” otherwise select “No.” By selecting “No” the Procedure
returns to DEVICE CODE (step 4) to allow selection of another
code number from the provided list.
(OK?)
7. USE NUM IR? –
Indicates the source component has numeric scrolling, such as
multi-disc CD player (See NUMERIC IR Setup Procedure for
advanced settings or more information). “No” advances menu to
AUTO PLAY (step 9).
(NumIR)
8. HIGHEST NUM –
Enter the highest possible number; for example, a 100-disc CD
player would have a max number of 100.
(High#)
52
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLER
INSTALLATION MENU
9. AUTO PLAY? –
“Yes” tells the CAM6.6 to issue a PLAY command whenever the
source is selected for listening. This option is skipped if the
source type (COMMAND TYPE) chosen does not have a PLAY
command associated with it.
(AtoPl)
10. SAVE CHANGES? –
Select “yes” to save changes. Procedure returns to SOURCE
NUM to allow configuration of another source.
(Save?)
KEY CONFIG (KeyCf)
Key Configuration defines zone-specific key functions for each source. See Key Config. - Flow Chart
on page 67
1. ZONE NUM –
Select the zone the key will be configured for. Changes are made
for that zone only; default setting is “All Zones.”
(Zone#)
2. SOURCE NUM –
Select the source the key will be configured for.
(Src #)
3. SELECT A KEY –
Using + or -, select the keypad key to be configured.
Either “Key Press,” “Key Hold” or “Both” will activate the command.
(SelKy)
4. KEY TYPE –
(KeyTp)
5. KEY NAME –
Name that appears on the keypad display when the command is
activated.
(KeyNm)
6. COMMAND TYPE –
Select the type of source command (e.g., CD, DVD, etc.).
(CmdTp)
a. Selected: Learned IR –
Choose Learned IR if the pre-programmed IR code library does
not support the source component.
(LrnIR)
i. LEARNED SRC –
(LnSrc)
Select the learned source bank to be assigned to the source
component. Procedure advances to KEY FUNCTION (step 8)
b. Selected: Unassigned
The key configuration is cleared. Procedure advances to SAVE
CHANGES (step 9)
(Unasg)
c. Selected: Default
Default selects the same device type and device code previously
setup in BASIC SETUP. Procedure advances to KEY FUNCTION
(step 8)
(Deflt)
d. Selected: Macro:
(To build macros, see Macro Editor page 62)
(Macro)
(continued)
53
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLER
INSTALLATION MENU
i. MACRO -
(Macro)
Macro loads a series of commands which are processed when
activated.
ii. MACRO ID –
Enter the macro ID number. Menu advances to SAVE CHANGES
(step 9)
(MacID)
e. All Other Selections:
Procedure advances to DEVICE CODE (step 7)
7. DEVICE CODE –
Enter source component code number listed in this manual’s
Reference section.
(DevCd)
8. KEY FUNCTION –
Select a function for the button.
(KeyFn)
9. SAVE CHANGES? –
Select “yes” to save changes. Procedure advances to ZONE NUM
(step 1)
(Save?)
SOURCE NAMES (SrcNm)
This procedure allows the installer to customize the source names for the sources attached to the
CAM6.6. See Source Names/ Vol Trim - Flow Chart on page 68
1. SOURCE NUM –
Select the source number this name will be assigned to.
(Src #)
2. SOURCE NAME –
Select the name. SOURCE NUM will reappear on the LCD panel;
repeat the instructions for each source to be labeled.
(Name)
SRC VOL TRIM (SrcVT)
This procedure allows the installer to adjust the output level of an individual source. The output vol-
ume is adjustable by 16dB. At 0dB (-3dB is the default setting), the volume is at max output; at -16dB
the volume is at the lowest setting possible for that source only. See Source Names/ Vol Trim -
Flow Chart on page 68
1. SOURCE NUM –
Select the source number this level will be set for.
(Src #)
2. TRIM LEVEL –
0dB is max output volume, -16dB is lowest setting.
(Trim)
NUMERIC IR (NumIR)
Numeric IR allows the installer to program source specific number functions (Channel 12, Disk 89, etc.).
See Numeric IR - Flow Chart on page 69 (continued)
54
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLER
INSTALLATION MENU
1. SOURCE NUM –
Select the source number this function will be configured for.
(Src #)
2. USE NUM IR? –
Tells the system whether the source component has numeric
scrolling, such as 100-disc CD player. A selection of “no”
disables Numeric IR and advances to SAVE CHANGES
(NumIR)
3. HIGHEST NUM –
Enter the highest possible number; for example, the 100-disc CD
player would have a max number of 100.
(High#)
4. NUMERIC TEXT –
Select Numeric descriptive text.
(NmTxt)
5. PREFIX CMD –
Tells the system whether a command will be issued prior to the
selection of the numerical value (e.g., Disc 1,2). If “no,” proce-
dure advances to SUFFIX CMD (step 9)
(Prefx)
6. COMMAND TYPE –
Select the type of command (e.g., CD, TV, etc.).
(CmdTp)
a. Selected: Learned IR
Choose Learned IR if the pre-programmed IR code library does
not support the source component.
(LrnIR)
i. LEARNED SRC –
(LnSrc)
Select the learned source bank to be assigned to the source
component. Procedure advances to KEY FUNCTION (step 8)
b. Selected: Unassigned
The numeric IR Prefix command is cleared. Procedure advances
to SUFFIX CMD (step 9)
(Unasg)
c. Selected: Default
Default selects the same device type and device code previously
setup in BASIC SETUP. Procedure advances to KEY FUNCTION
(step 8)
(Deflt)
d. Selected: Macro:
(Macro)
(To build macros, see Macro Editor page 62)
i. MACRO -
(Macro)
Macro loads a series of commands which are processed when
activated.
ii. MACRO ID –
Enter the macro ID number. Menu advances to SUFFIX CMD (step 9)
(MacID)
e. All Other Selections:
Procedure advances to DEVICE CODE (step 7)
Source component code for IR control.
7. DEVICE CODE –
(DevCd)
8. KEY FUNCTION –
Select a function (Disc, etc.).
(continued)
(KeyFn)
55
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLER
INSTALLATION MENU
9. SUFFIX CMD –
Tells the system whether a command will be issued after the
selection of the numerical value (e.g., 1, 2 Enter). If “no,” proce-
dure advances to SAVE CHANGES (step 13)
(Sufix)
10. COMMAND TYPE –
Select the type of source command (e.g., CD, TV, etc.).
(CmdTp)
a. Selected: Learned IR
Choose Learned IR if the pre-programmed IR code library does
not support the source component.
(LrnIR)
i. LEARNED SRC –
(LnSrc)
Select the learned source bank to be assigned to the source
component. Procedure advances to KEY FUNCTION (step 12)
b. Selected: Unassigned
The numeric IR Suffix command is cleared. Procedure advances
to SOURCE NUM (step 1)
(Unasg)
c. Selected: Default
Default selects the same device type and device code previously
setup in BASIC SETUP. Procedure advances to KEY FUNCTION
(step 12)
(Deflt)
d. Selected: Macro:
(Macro)
(To build macros, see Macro Editor page 62)
i. MACRO -
(Macro)
Macro loads a series of commands which are processed when
activated.
ii. MACRO ID –
Enter the macro ID number. Menu advances to SAVE CHANGES
(step 13)
(MacID)
e. All Other Selections:
Procedure advances to DEVICE CODE (step 11)
Source component code for IR control.
11. DEVICE CODE –
(DevCd)
12. KEY FUNCTION –
Select a function (Enter, Play, etc.).
Select “yes” to save the changes.
(KeyFn)
13. SAVE CHANGES? –
(Save?)
SRC SEL CMD (SrcSC)
This procedure permits a command to be sent to the source component when the source component
is initially selected. See Source Select Command & # Of Sources - Flow Chart on page 70
1. SOURCE NUM –
Select the source number this command will be configured for.
(Continued next page)
(Src #)
56
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLER
INSTALLATION MENU
2. COMMAND TYPE –
Select the type of source command (e.g., CD, TV, etc.).
(CmdTp)
a. Selected: Learned IR
Choose Learned IR if the pre-programmed IR code library does
not support the source component.
(LrnIR)
i. LEARNED SRC –
(LnSrc)
Select the learned source bank to be assigned to the source
component. Procedure advances to KEY FUNCTION (step 4)
b. Selected: Unassigned
The source select command is cleared. Procedure advances to
SAVE CHANGES (step 5)
(Unasg)
c. Selected: Default
Default selects the same device type and device code previously
setup in BASIC SETUP. Procedure advances to KEY FUNCTION
(step 4)
(Deflt)
d. Selected: Macro:
(Macro)
(To build macros, see Macro Editor page 62)
i. MACRO -
(Macro)
Macro loads a series of commands which are processed when
activated.
ii. MACRO ID –
(MacID)
Enter the macro ID number. Menu advances to SAVE CHANGES
(step 5)
e. All Other Selections:
Procedure advances to DEVICE CODE (step 3)
Source component code for IR control.
3. DEVICE CODE –
(DevCd)
4. KEY FUNCTION –
Select a function (Play, Enter, etc.).
Select “yes” to save the changes.
(KeyFn)
5. SAVE CHANGES? –
(Save?)
# OF SOURCES (#Srcs)
At this field it is necessary to enter the number of sources used in the CAM6.6 system (1 to 6). This
limits the sources displayed on the keypad in the normal running mode when the source button is
pressed, but also limits source selections in the configuration menus. See Source Select
Command & # Of Sources - Flow Chart on page 70
57
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLER
INSTALLATION MENU
ZONE SETUP (ZonSu)
NOTE: This procedure should be performed using the keypad installed in the zone to be configured.
See Zone Setup - Flow Chart on page 71
Zone Setup allows the installer to adjust properties of the UNO Keypad controlled CAM6.6 zone. This
series of menus allows the system’s zones to be configured for these properties:
ZON VOL TRIM (ZonVT)
MASTER ENABL (MstEn)
SYSON ENABLE (SysOn)
MUTE ENABLE (MutEn)
PARTY ENABLE (PtyEn)
1. ZON VOL TRIM
This feature allows the installer to adjust the output volume to
each zone. -16dB (lowest) to 0dB (max)(-3DB default).
(ZonVT)
2. SYSON ENABLE
This feature is either disabled or enabled. If disabled (default), an
All On command activated from another zone will not turn on the
disabled zone. If enabled, an All On command activated from
another zone will turn on the enabled zone.
(SysOn)
3. PARTY ENABLE
This feature is either disabled or enabled. If disabled, Party Mode
activation from another zone will not affect the disabled zone. If
enabled (default), the zone will participate with Party Mode.
(PtyEn)
4. MASTER ENABLE
This feature is either disabled or enabled. If disabled, the zone
cannot host a master keypad during Party Mode. If enabled
(default), the zone has the option of hosting the Master keypad.
(MstEn)
5. MUTE ENABLE
This feature is either disabled or enabled. It allows the option of
enabling or disabling muting in a zone. If disabled, the zone will
not mute. If enabled (default), the zone will be muted when a
mute signal is received.
(MutEn)
CTRLR SETUP (CtlId)
Controller Setup is the basic configuration of the controller. This setup menu selects the options for
Controller ID and Factory Initialization. See Controller Setup - Flow Chart on page 72
1. CONTROLLER ID
This defines the Controller ID for this system. The default is 1 but
when multiple controllers are used, each additional controller ID
must be sequential and unique and be set before being connect-
ed to the system. Note that the system must be restarted before
the controller will assume the new ID.
(CtlId)
(continued next page)
58
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLER
INSTALLATION MENU
2. FACTORY INIT
WARNING: This procedure returns the controller to its
original settings - use with discretion.
(FInit)
Factory Initialization allows the installer to erase all programmed
settings and returns the settings to the factory default settings.
All settings including source equipment IR commands will need to
be reentered. An “Are you sure?” prompt and a “no” response
allows the installer to cancel the reset; a “yes” at the prompt will
load factory/ default settings.
POWER MANAGEMENT (PwMgt)
The CAM6.6 is capable of managing the power state of the connected source equipment. The power
management is configured on a source-by-source basis.
All sources that have power management enabled are initialized by a “POWER ON” command or
macro. Power management is initialized when the first keypad is turned on or when the home theater
trigger input has 12VDC present. The 12VDC trigger output is turned on when the first zone is
turned on.
All sources that have power management enabled are turned off by the “POWER OFF” command after
all zones have been turned off, with a timeout of five minutes.The 12VDC trigger output is turned off
one minute after that. This timeout is postponed for as long as the home theater trigger input has
12VDC present. See Power Management - Flow Chart on page 73
1. SOURCE NUM –
Select the source number this feature will be configured for.
(Src #)
2. POWER ON CMD –
Tells the controller to turn on the selected source equipment (by
SOURCE NUMBER) when any of the UNO System Keypads is
turned on. If “no,” procedure advances to POWER OFF CMD (step 6)
(OnCmd)
3. COMMAND TYPE –
Select the type of source command (e.g., CD, TV, etc.).
(CmdTp)
a. Selected: Learned IR
Choose Learned IR if the pre-programmed IR code library does
not support the source component.
(LrnIR)
i. LEARNED SRC –
(LnSrc)
Select the learned source bank to be assigned to the source
component. Procedure advances to KEY FUNCTION (step 5)
b. Selected: Unassigned
The Power On command is cleared. Procedure advances to
POWER OFF CMD (step 6)
(Unasg)
(continued)
59
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLER
INSTALLATION MENU
c. Selected: Default
Default selects the same device type and device code previously
setup in BASIC SETUP. Procedure advances to KEY FUNCTION
(step 5)
(Deflt)
d. Selected: Macro:
(Macro)
(To build macros, see Macro Editor page 62)
i. MACRO -
(Macro)
Macro loads a series of commands which are processed when
activated.
ii. MACRO ID –
Enter the macro ID number. Menu advances to POWER OFF CMD
(step 6)
(MacID)
e. All Other Selections:
Procedure advances to DEVICE CODE (step 4)
Source component code for IR control.
4. DEVICE CODE –
(DevCd)
5. KEY FUNCTION –
Select a function (Play, Enter, etc.).
(KeyFn)
6. POWER OFF CMD –
Tells the controller to turn off the selected source equipment (by
SOURCE NUMBER) when the last of the UNO System Keypads is
turned off. If “no,” procedure advances to SAVE CHANGES (step 10)
(OfCmd)
7. COMMAND TYPE –
Select the type of source command (e.g., CD, TV, etc.).
(CmdTp)
a. Selected: Learned IR
Choose Learned IR if the pre-programmed IR code library does
not support the source component.
(LrnIR)
i. LEARNED SRC –
(LnSrc)
Select the learned source bank to be assigned to the source
component. Procedure advances to KEY FUNCTION (step 9)
b. Selected: Unassigned
The Power Off command is cleared. Procedure advances to
SAVE CHANGES (step 10)
(Unasg)
c. Selected: Default
Default selects the same device type and device code previously
setup in BASIC SETUP. Procedure advances to KEY FUNCTION
(step 9)
(Deflt)
d. Selected: Macro:
(Macro)
(To build macros, see Macro Editor page 62)
i. MACRO –
(Macro)
Macro loads a series of commands which are processed when
activated.
ii. MACRO ID –
Enter the macro ID number.Menu advances to SAVE CHANGES
(MacID)
(step 10)
(continued next page)
60
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLER
INSTALLATION MENU
e. All Other Selections:
Procedure advances to DEVICE CODE (step 8)
8. DEVICE CODE –
Source component code for IR control.
(DevCd)
9. KEY FUNCTION (f) –
Select Keypad function.
(KeyFn)
10. SAVE CHANGES? (f) –
Select “yes” to save the changes.
(Save?)
LEARN IR (LrnIR)
This procedure allows IR commands to be learned into the system and be centrally stored in the main
controller to let the system access the same IR codes that operate the source equipment.
NOTE: IR codes must be learned in by pointing the remote at the CAM6.6’s REAR panel IR receiver
only. See Learn IR - Flow Chart on page 74
1. LEARNED SRC –
Select the source (Source 1-6 and Miscellaneous Learned IR
(Misc)) whose commands will be learned into the controller.
(LnSrc)
2. KEY FUNCTION –
Select the function to be learned or deleted.
(KeyFn)
3. LEARN/ DELETE –
Select Learn IR Now or Delete IR. If Learn IR Now, a “USE
REMOTE” prompt appears. Point the learning remote at the
controller’s IR window. If Delete IR, procedure returns to
LEARNED SRC (step 1)
(Ln/ Dl)
4. TEST IR? –
If “yes,” sends the learned command to the source component
to test the IR. If the component responds, the IR test was a
success. If the component does not respond the Code was not
learned properly. If “no,” menu goes back to LEARNED SRC
(step 1)
(TstIR)
5. SUCCESS? -
Asks if the IR test was a success
(OK?)
IF YES - If the test was a success, specify “yes” and proceed to
KEY FUNCTION (step 2)
IF NO - If the test was a failure, specify “no” and LEARN/ DELETE
(step 3) reappears on the display allowing another code to be
learned in.
61
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLER
INSTALLATION MENU
MACRO EDITOR (MacEd)
This procedure is used to create a sequence of commands that are launched with one key touch or
other event. Up to 132 macros can be created for the system, and each macro can contain up to 10
commands including other macros and delays. See Macro Editor - Flow Chart on page 75
1. MACRO ID –
Number of Macro up to 132 including any previously named
macros.
(MacID)
2. MACRO NAME –
Name of Macro (optional).
(MacNm)
3. COMMAND NUM –
Number of Command up to 10.
(Cmd#)
4. COMMAND TYPE –
Select the type of source command (e.g., CD, TV, etc.).
(CmdTp)
a. Selected: Learned IR
Choose Learned IR if the pre-programmed IR code library does
not support the source component.
(LrnIR)
i. LEARNED SRC –
(LnSrc)
Select the learned source bank to be assigned to the source
component. Procedure advances to KEY FUNCTION (step 6)
b. Selected: Unassigned
Selected command and subsequent commands are cleared.
Procedure advances to COMMAND NUM (step 3)
(Unasg)
c. Selected: Default
Default selects the same device type and device code previously
setup in BASIC SETUP. Procedure advances to KEY FUNCTION
(step 6)
(Deflt)
d. Selected: Macro:
(Macro)
i. MACRO -
(Macro)
A macro can “call” another macro if a sequence of more than 10
commands is needed.
ii. MACRO ID –
Enter the macro ID number. Menu advances to COMMAND NUM
(step 3)
(MacID)
e. Selected: Delay
Enter a 1- to 60-second delay time to postpone delivery of the
next command in the macro. Procedure advances to COMMAND
NUM (step 3)
(Delay)
f. All Other Selections:
Procedure advances to DEVICE CODE (step 5)
(continued next page)
62
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLER
INSTALLATION MENU
5. DEVICE CODE –
Source component code for IR control.
(DevCd)
6. KEY FUNCTION –
Select a function (Play, etc.).
(KeyFn)
SYSTEM INFO (SInfo)
System Info allows the installer to view the controller’s manufacturing build properties.
See System Info - Flow Chart on page 76
#CONTROLLERS (#Ctls)
BUILD TIME (BTime)
BUILD DATE (BDate)
VERSION (Ver)
1. #CONTROLLERS
Displays the number of CAM6.6 controllers in the system.
Displays the Software Build Time of the controller.
Displays the Software Build Date of the controller.
Displays the software version of the CAM6.6.
(#Ctls)
2. BUILD TIME
(BTime)
3. BUILD DATE
(BDate)
4. VERSION
(Ver)
63
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLER
SETUP MENU FLOW CHARTS
64
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLER
SETUP MENU FLOW CHARTS
65
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLER
SETUP MENU FLOW CHARTS
66
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLER
SETUP MENU FLOW CHARTS
67
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLER
SETUP MENU FLOW CHARTS
68
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLER
SETUP MENU FLOW CHARTS
69
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLER
SETUP MENU FLOW CHARTS
70
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLER
SETUP MENU FLOW CHARTS
71
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLER
SETUP MENU FLOW CHARTS
72
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLER
SETUP MENU FLOW CHARTS
73
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLER
SETUP MENU FLOW CHARTS
74
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLER
SETUP MENU FLOW CHARTS
75
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLER
SETUP MENU FLOW CHARTS
76
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLER
KEYPAD DIAGNOSTIC MENU
UNO Keypad Diagnostics Menu
The Diagnostics Menu allows the installer to run
a diagnostic check on the keypad and to verify
the firmware version. The Diagnostics Menu also
contains the update firmware procedure for
updating the UNO-S1 and UNO-S2’s firmware.
When finished, press and release the Setup but-
ton again (except for the Update Firmware where
the power must be cycled).
Note: Do not change Controller ID settings in
this menu. Controller ID is set in the Controller
Setup menu (see Controller Setup Menu on
page 72).
To access the Diagnostics Menu, press and hold
the Setup button on the right side of the keypad
until “DIAGNOSTICS” appears on the display. The
menus are outlined in the diagram below.
77
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLER
IR DEVICE CODES
JBL
JCB
Jensen
JVC
KEC
Kenwood
KLH
KTV
LG
Lloyd’s
LXI
0054
0000
0761
Sony
1100, 0000, 1904
0180, 0178
0171
0180
0180
Device Codes for TVs:
Soundesign
Squareview
SSS
Starlite
Studio Experience 0843
Supreme
SVA
Sylvania
Symphonic
Tandy
Admiral
Advent
Aiko
0093, 0463
0761, 0842
0092
0053, 1253, 1923, 0731
0180
0030
0765, 0767
0180, 0030
0178, 0700, 0856
1904
0047, 0054, 0154, 0156, 0178
1454, 0054, 0030, 0706, 1904,
1254
0054, 0030
0250
1755
0700
Akai
Albatron
0030, 0672, 0702, 0812
0700, 0843
0000
0748, 0865
0054, 0030, 0171
0180, 0171, 1904
0093
1756
0051, 0250
0051
America Action 0180
Anam
0180
AOC
0030
Apex Digital
Audiovox
Bell & Howell
BenQ
0748, 0765, 0767, 0879, 1943
0451, 0180, 0092, 0623
0154
1032
Magnavox
Tatung
Technics
Techwood
Teknika
Telefunken
Thomas
TMK
Marantz
Matsushita
Maxent
Megapower
Megatron
Memorex
MGA
Midland
Mitsubishi
Monivision
Motorola
MTC
Multitech
NAD
NEC
Nikko
Norcent
NTC
0054, 0180, 0150, 0060, 0092
Bradford
Broksonic
Candle
0180
0702
1904
0178
0017
0236, 0463, 1935, 1911
0030
0178, 0145
Carnivale
Carver
0030
0054
0154, 0463, 0150, 0178, 1911
0150, 0030, 0178
0047, 0017, 0051
0093, 1250, 0150, 0178, 1917
0843, 0700
0093
0060, 0030
0180
0156, 0178, 0866
0030
TNCi
Toshiba
0154, 0156, 0060, 1256, 1156,
1656, 1356, 1945, 1935
0463
1756
Celebrity
Celera
0000
0765
TVS
V Inc.
Changhong
Citizen
Clarion
0765
0060, 0030, 0092
0180
Vector Research 0030
Victor
Vidikron
Vidtech
Viewsonic
Wards
Waycon
Westinghouse
WhiteWestinghouse 0463, 0623
0053
0054
0178
1755
Comm’l Solutions 1447, 0047
Contec
Craig
Crosley
Crown
0180
0180
0054
0180
0030, 0178, 0092
0748, 0824
0092
0054, 0030, 0178, 0866, 1156
0156
0889
Curtis Mathes
0047, 1147, 1347, 0054, 0154,
0451, 0093, 0060, 0030, 0145,
0166, 0702
Onwa
0180
Optimus
Optonica
Orion
Panasonic
Penney
0154, 0250, 0166
0093
0236, 0463, 1911, 1463
0250, 0051, 1941
0047, 0156, 0051, 0060, 0030,
0178, 1347
0054, 0030
1454, 0054, 1961, 0690
0030
0166, 0679, 0866
0092
0761
0700
0051
1447, 0047, 1347, 1922
0178
0017
0250, 0051
0047, 0154, 0180, 0030, 0178,
1904
1447, 0047, 1047, 1347, 1917,
0679, 1247, 1547, 1948, 0090,
1147, 1922
0154, 0180, 0030, 0178
0017, 0030
0030, 1755
0060, 0812, 0702, 0030, 0178,
0766, 1959, 1060
Yamaha
Zenith
0030
CXC
Daewoo
0180
0017, 0463, 0178, 1911, 0092,
1904
0451, 1661, 0672, 0092, 0661,
0623
1080
0145
Dell
Denon
Dumont
Durabrand
Electroband
Emerson
0017
Philco
Philips
Pilot
0463, 0180, 0178, 0171, 1034
0000
0154, 0236, 0463, 0180, 0178,
0171, 1911, 0623
0030
0812, 0171
0154
0853, 0809, 0683
0180, 0171, 1904
0180
1756, 1755
1447, 0047, 1147, 1347, 0051,
0451, 0178, 1922, 1917
0017, 0030
0886
0030, 0178
0180
1034
0178
Device Codes for Cable:
ABC
Americast
Bell South
Clearmaster
ClearMax
Coolmax
Director
0003, 0008
0899
0899
0883
0883
0883
0476
Pioneer
Portland
Prima
Princeton
Prism
Proscan
Proton
Pulsar
Quasar
Radio Shack
Envision
ESA
Fisher
Fujitsu
Funai
Futuretech
Gateway
GE
General Instrument 0003, 0476, 0810, 0276
GoldStar
Hamlin
0144
0009, 0273
0003, 0276, 0476, 0810
0000
0476, 0276, 0810, 1254, 1376
0883
0237, 1877
0000, 0107
0000
0317, 1305
0144, 0533, 0877, 1877
0000
0000
0883
0273, 0279
0000
0144
Jerrold
Gibralter
Go Video
GoldStar
Grunpy
Haier
Hallmark
Harley Davidson 1904
Harman/Kardon 0054
Harvard
Havermy
Helios
Hello Kitty
Hisense
Hitachi
Hyundai
Infinity
Memorex
Motorola
Multitech
Pace
Panasonic
Paragon
Philips
Pioneer
Pulsar
Quasar
RadioShack
Regal
RCA
Realistic
Runco
Sampo
Samsung
0180
0093
0865
0451
Sansui
Sanyo
Scotch
Scott
0463, 1935, 1911, 1904
0154, 0088
0178
0236, 0180, 0178
0748
Runco
Samsung
1145, 0145, 1960, 1904
Sears
0047, 0054, 0154, 0156, 0178,
0171, 1904
0093, 1917
0093
0849
0054
0017
Scientific Atlanta 0008, 0477, 0877, 1877
Sony 1006
Sharp
Sheng Chia
Inteq
(continued next page)
78
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLER
IR DEVICE CODES
Hitachi
HTS
0819, 1250
0775, 1775
Emerson
0037, 0184, 0000, 0121, 0043,
0209, 0002, 0278, 0479
0047, 0104
0035, 0033
0000
0000
1972
0035, 0060, 0240
0432
0037, 0038
0000
Device Codes for Cable: (cont’d)
Starcom
Supercable
Supermax
Torx
0003
0276
0883
0003
Fisher
Fuji
Funai
Garrard
Gateway
GE
Go Video
GoldStar
Gradiente
Harley Davidson 0000
Harman/Kardon 0081, 0038
Harwood
Hewlett Packard 1972
Hughes Net. Sys. 0749, 1142, 1749, 1442
I-Lo
JVC
LG
Magnavox
Memorex
Mitsubishi
Motorola
Next Level
Panasonic
Paysat
1535
0775, 1775
1414
0724, 0722
0724
0749
0869
0869
0247, 0701
0724
Toshiba
Tristar
0000
0883
V2
0883
Viewmaster
Vision
0883
0883
Vortex View
Zenith
0883
0000, 0525, 0899
0072
Philips
1142, 0749, 1749, 0724, 1076,
0722, 0099, 1442, 0856
Proscan
Proton
RadioShack
RCA
Samsung
Sony
Star Choice
Tivo
Toshiba
UltimateTV
Uniden
US Digital
USDTV
Voom
0392, 0566
1535
0869
HI-Q
Hitachi
0047
0000, 0042, 0041, 0089
Device Codes for Video Acc:
Howard Computers1972
Hughes Net. Sys. 0042, 0739
iBUYPOWER
Jensen
JVC
KEC
Kenwood
KLH
Kodak
Lloyd's
Logik
0392, 0566, 0143, 0855, 1392
1276, 1109, 1108
0639, 1639, 1640
0869
1142, 1442
0749, 1749, 0790, 1285
1392,1640
0724, 0722
1535
ABS
1272
1972
0041
0067, 0041
0037, 0278
0067, 0041, 0038
0072
0035, 0037
0000
Alienware
CyberPower
D-Link
1272
1272
1554
Escient
Gateway
1151, 1371, 1370, 1373, 1372
1272
Hewlett Packard 1272, 1267
Howard Computers1272
iBUYPOWER
LG
Linksys
1272
1415
1365
1535
0869
0856, 1856
0072
0037
LXI
Zenith
Magnavox
Magnin
Marantz
Marta
Matsushita
Media Center PC 1972
0035, 0039, 0081, 0000, 0149
0240
0035, 0081
0037
0035, 0162
Media Center PC 1272
Microsoft
Mind
1272
1272
Motorola
Northgate
Panasonic
Pioneer
1363
1272
1120
1010
Device Codes for VCRs:
ABS
Admiral
Adventura
Aiko
MEI
Memorex
0035
1972
0048, 0209
0000
0278
0037, 0000
0041
0035, 0162, 0037, 0048, 0039,
0047, 0240, 0000, 0104, 0209,
0479
Samsung
1190, 1490
Sensory Science 1126
Sharp
1010
MGA
0240, 0043
SMC
1456
Aiwa
Akai
MGN Technology 0240
Microsoft
Mind
Minolta
Mitsubishi
Motorola
MTC
Multitech
NEC
Sony
1272, 1324, 1364
1272
1272
1272
1272
1972
1972
0042
Systemax
Tagar Systems
Toshiba
Touch
Alienware
America Action 0278
American High
Asha
Audiovox
Beaumark
Bell & Howell
Broksonic
Calix
Canon
Carver
CCE
Citizen
Colt
Craig
1972
0035
0240
0037, 0278
0240
0067, 0043
0035, 0048
0240, 0000
0000, 0072
0104, 0067, 0041, 0038
0037
0240
1972
0035
1062, 0162, 0037, 0048, 0104,
0432
0184, 0209, 0002, 0479
1062, 0035, 0162, 0225, 0616
0035, 0037, 0240, 0042, 0038
0042
0035
0035, 0081, 0618, 0739
0037
0067
0081
0240
0060
0072
Viewsonic
ZT Group
1272, 1329
1272
0104
0184, 0121, 0209, 0002, 0479
0037
0035
0081
0072, 0278
0037, 0278
0072
0037, 0047, 0240, 0072
0060, 0035, 0162, 0041
0240
1972
0045, 0278
1972
0042
0739
0039, 0038
0000
Nikko
Noblex
Northgate
Olympus
Optimus
Device Codes for SAT/ DSS:
AlphaStar
Century
Chaparral
Crossdigital
DirecTV
0772
0856
0216
1109
Orion
Panasonic
Penney
Pentax
Philco
Philips
Pilot
Pioneer
Polk Audio
Profitronic
Proscan
Protec
Curtis Mathes
Cybernex
CyberPower
Daewoo
Dell
0392, 0566, 0639, 1639, 1142,
0247, 0749, 1749, 0724, 0819,
1856, 1076, 1109, 0099, 1640,
1108, 1392, 1442, 1414
Dish Network Sys 1005, 0775, 1775, 1505
Dishpro
Echostar
Expressvu
GE
1005, 0775, 1505, 1775
1005, 0775, 1775, 1505
0775, 1775
Denon
DirecTV
Durabrand
Dynatech
Electrohome
Electrophonic
Emerex
0566
General Instrument 0869
0037
0037
0032
GOI
Hisense
0775, 1775
1535
(continued next page)
79
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLER
IR DEVICE CODES
Pioneer
Quasar
Sony
0059
0204
0201
0204
Sony
Sylvania
Symphonic
Technics
Theta Digital
Toshiba
Urban Concepts 0503
US Logic
Xbox
Yamaha
Zenith
0533, 0864, 1033
0675
0675
0490
0571
0503, 1154, 0695
Device Codes for VCRs: (cont’d)
Pulsar
0039
Quasar
Radio Shack
Radix
0035, 0162
0000
0037
Technics
Randex
RCA
0037
0060, 0240, 0042, 0149, 0880
0839
0522
0490, 0539, 0545
0503, 0591, 0869
Device Codes for DVD Players:
Allegro
Realistic
0035, 0037, 0048, 0047, 0000,
0104
0869
ReplayTV
Runco
0616
0039
Apex Digital
0672, 0717, 0797, 1061, 0796,
1056, 0794, 1020
1168
0717
0571
0695
0869
1086
0816, 1129
0784, 0833, 1172, 0869
0490
0521
0591, 0675
0591
0670
0675
1073, 1194, 1158, 1077
0522, 0717
0744, 0715, 0833, 1099, 0783,
1075, 1730, 0869, 1158
0717
0573, 0664
0672
Samsung
Sanky
0045, 0240
0048, 0039
Aspire Digital
Blaupunkt
Blue Parade
Broksonic
CineVision
Coby
CyberHome
Daewoo
Denon
DVD2000
Emerson
Enterprise
Fisher
Sansui
Sanyo
Scott
0000, 0067, 0209, 0041, 0479
0047, 0240, 0104
0184, 0045, 0121, 0043
Device Codes for Tuner/ Amp:
ADC
Aiwa
Anam
Audiotronic
Bose
Capetronic
Carver
Coby
0531
Sears
0035, 0037, 0047, 0000, 0042,
0104
0189, 1405, 0158, 0121
1609, 1074
1189
1229
0531
0189, 1189
1263
1383
1360, 1142
1517
1263
Sharp
0048
0072
0240
0072
0616
Shintom
Shogun
Singer
Sonic Blue
Sony
0035, 0032, 0033, 0000, 0636,
1972
Dell
Funai
Gateway
GE
Denon
Gateway
Glory Horse
Harman/Kardon 0110, 0189
Hewlett Packard 1181
Integra
JBL
JVC
Kenwood
KLH
STS
0042
Sylvania
Symphonic
Systemax
Tagar Systems
Tatung
0035, 0081, 0000, 0043
0000
1972
1972
Go Video
Greenhill
Hitachi
Hiteker
Initial
JVC
Kenwood
KLH
Koss
Lasonic
LG
Lite-On
Magnavox
Marantz
Memorex
Microsoft
Mintek
0135
0110
0074, 1263
1313, 1569, 0027
1428
0189
1189, 1269, 0189, 0531
1189, 1269, 0039, 0189
0039
1393
0041
Teac
0000, 0041
Technics
Teknika
Thomas
Tivo
0035, 0162
0035, 0037, 0000
0000
0717
0558, 0623, 0867
0490, 0534
0717, 1020
0651
Linn
0618, 1503, 0739, 0636
Magnavox
Marantz
MCS
Mitsubishi
Onkyo
Optimus
Panasonic
Philips
Pioneer
Polk Audio
Proscan
Quasar
RadioShack
RCA
TMK
0240
Toshiba
Totevision
Touch
0045, 0043, 1008, 1972, 1503
0037, 0240
1972
0798
0591, 0869
1158, 1058
0503, 0539, 0675
0539
0695
0522
0839, 0717
1521, 0521
0717
0503
0651
0490, 1762
0503, 0539, 0646, 0675, 0885
0525, 0571
1086, 1061
0539
0135
Unitech
Vector
0240
0045
1023, 0670, 0531, 1074
0039, 0309
1189, 1269, 0189
1023, 0150, 0014, 0630, 0531
0189
1254
0039
1263
1023, 1609, 1254, 1074, 0531
1383
0189
1263
Vector Research 0038
Video Concepts 0045
Videomagic
Videosonic
Viewsonic
Villain
0037
0240
1972
0000
Mitsubishi
Nesa
Onkyo
Wards
0035, 0060, 0048, 0047, 0081,
0000, 0042, 0240, 0072, 0149
Oritron
Panasonic
Philips
Pioneer
Polaroid
Polk Audio
Proscan
Qwestar
RCA
Rio
Rotel
Sampo
Samsung
Sansui
Sanyo
Rio
Sansui
White Westinghouse 0209, 0072
XR-1000
Yamaha
Zenith
0035, 0000, 0072
0038
0039, 0033, 0000, 0209, 0479
1972
Sharper Image
Sonic Blue
Sony
Soundesign
Stereophonics
Sunfire
1383
1058, 1759, 0158, 1406
0670
1023
1313
1074
1308, 0039, 0309
1189
0074
0158, 0189, 0014
0176, 1276, 1176
ZT Group
0522
0651
0522, 0571, 0717, 0822
0869
0623
Teac
Technics
Thorens
Victor
Wards
Yamaha
Device Codes for Laser Disc
Players:
0752
0490, 0573, 1075, 0820
0695
0695, 0670, 0873
0630, 0752
1077
Denon
Mitsubishi
NAD
Optimus
Panasonic
0059
0059
0059
0059
0204
Sharp
Sherwood
Shinsonic
Sonic Blue
0533, 0839
0869, 1099
80
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLER
IR DEVICE CODES
QED
Quad
0157
0157
0029
1075
Device Codes for Amp and
Misc. Audio:
Quasar
RadioShack
RCA
Realistic
Rotel
SAE
Sansui
Sanyo
Scott
Aiwa
0159
0032, 0305, 0179, 0053, 0420
Altec Lansing
1485
0420, 0179
0157, 0420
0157
0157, 0305
0087, 0179
0305
0305
0861, 0037
1067
0157
0490, 0000, 0100
0145
0305
0157
0420
0420
0029
0072
0157, 0053
0888, 0036
Cambridge Sound.1530
Creative
Durabrand
GE
0872
1561
0078
Harman/Kardon 0892
JVC
0331
0892
1561
0892, 1491
1464
1605
0395
0892
0892
0395
1302
0159
0078
0331
0078
0354
Sears
Sharp
Left Coast
Lenoxx
Marantz
Motorola
Omnifi
Optimus
Philips
Polk Audio
Realistic
Russound
Sony
Sherwood
Sonic Frontiers
Sony
Soundesign
Symphonic
TAG McLaren
Tascam
Teac
Technics
Victor
Wards
Soundesign
Victor
Wards
Yamaha
Yamaha
Device Codes for Home Control:
Device Codes for CD Players:
Accutek
Bionaire
Frigidaire
GE
1215
1215
1333
0240
Aiwa
0157
Burmester
0420
Calif. Audio Labs 0029
GoldStar
Holmes
Lasko
1537
1215
0846
Carver
Denon
DKK
0157, 0179
0873, 0003
0000
LG
1537
DMX Electronics 0157
Lutron
0597
Emerson
Fisher
0305
0179
One For All
RadioShack
Russound
0167
0240
1232, 1233
Garrard
Genexxa
0420
0032, 0305
Security System 0167
Harman/Kardon 0157, 0173
Sharper Image
Universal X10
Whirlpool
Windmere
X10
0846
0167
1332
1215
0167
Hitachi
Integra
JVC
0032
0101
0072
Kenwood
KLH
0681, 0028, 0037, 0190
1318
Krell
0157
Linn
0157
LXI
0305
Magnavox
Marantz
MCS
0157, 0305
0029, 0157
0029
Miro
0000
Mission
MTC
0157
0420
NSM
0157
Onkyo
Optimus
0868, 0101
1063, 0000, 0032, 0037, 1075,
0179, 0145, 0420, 0087, 0305
Panasonic
Parasound
Philips
0029
0420
0157
Pioneer
1063, 0032, 0305
Polk Audio
Proton
0157
0157
81
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLER
KEY CODES
TV (HDTV)
KEY FUNCTION UNO-S1 TV (HDTV)
KEY FUNCTION UNO-S1 TV (HDTV)
1
1
Digit 1
Pause
Pause
Recrd
Menu
Learned Only
Learned Only
Menu (Picture)
2
2
Digit 2
Record
3
3
Digit 3
Menu
4
4
Digit 4
Menu Up
Menu Dn
Menu Left
Menu Right
Select
MenuU Menu Up, Adjust Up
MenuD Menu Dn, Adjust Dn
5
5
Digit 5
6
6
Digit 6
MenuL
Menu Left
7
7
Digit 7
MenuR Menu Right
8
8
Digit 8
Sel
Menu Select
Exit, Cancel
Display, OSD, Info
Guide
9
9
Digit 9
Exit
Exit
0
0
Digit 0
Display
Displ
Guide
PageU
PageD
Disk
Volume Up
Volume Down
Mute
VolUp
VolDn
Mute
Volume Up
Volume Down
Mute
Guide
Page Up
Page Down
Disk
Adjust up
Adjust Down
Learned Only
+100
Channel Up
Channel Dn
Power
Enter
Ch Up Channel Up
Ch Dn Channel Down
Power Power On/Off
Plus 10
Pls10
Op/Cl
Open/Close
Random
Track Fwd
Track Rev
Sur On/Off
Sur Mode
Surround Up
Surround Dn
PIP
Learned Only
Enter
Channel Enter
Randm Learned Only
Prev Channel
TV/Video
TV/VCR
A/B
PrvCh Last Channel
TVVid Learned Only
TVVCR Learned Only
TkFwd
TkRev
SurOn
SurMd
SurUp
SurDn
PIP
Learned Only
Learned Only
Surround On/Off
Learned Only
Learned Only
Learned Only
Learned Only
PIP Move
A / B
Learned Only
TV/DVD
TV/LD
Input
TVDVD Learned Only
TV LD Learned Only
Input
TV/Video
TV/DSS
Play
TVDSS Learned Only
PIP Move
PIP Swap
Program
Sleep
PIP M
PIP S
Progm
Sleep
On
Play
Learned Only
Learned Only
Learned Only
PIP Swap
Stop
Stop
SrchF
Learned Only
Learned Only
On, Power On/Off
Search Fwd
Search Rev
SrchR Learned Only
On
82
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLER
KEY CODES
TV (HDTV)
KEY FUNCTION UNO-S1 TV (HDTV)
KEY FUNCTION UNO-S1 TV (HDTV)
Off
Off
Off, Power On/Off
Learned Only
Learned Only
Learned Only
Learned Only
Learned Only
Learned Only
Learned Only
Learned Only
Learned Only
Learned Only
Learned Only
PIP Chan Up
PIP Chan Dn
Input 1
PIPCU PIP Channel Up
11
11
PIPCD PIP Channel Down
12
12
In 1
In 2
In 3
In 4
In 5
In 6
In 7
In 8
In 9
In 10
VID1,Video,TVp1
VID2,TVp2
13
13
Input 2
14
14
Input 3
VID3,TVp3
15
15
Input 4
VID4,TVp4
16
16
Input 5
VID5,AV1,VCR,BNC
VID6,AV2,VDP,DVD,DVI
TV, Component
CAB,SAT,S-Video
AV, Tuner
Bright
Dim
Brght
Dim
Close
Open
Halt
Input 6
Input 7
Close
Open
Input 8
Input 9
Halt
Input 10
AUX, RGB
AM/FM
Cue
AM/FM Learned Only
Cue Learned Only
Disk Up
Disk Down
Info
DiskU Learned Only
DiskD Learned Only
Info
Learned Only
External Antenna
Learned Only
Menu (Audio)
Back
External Src
Live/Intro
Menu
Back
ExtSr
Intro
Menu
Back
Fav Channel
Display Fmt
SAP
FavCh Favorite
DFrmt Fmt,Wide,16:9,Aspct
SAP
Slow
SAP, CC
Slow
Learned Only
PIP On
PIP Off
PIP Freeze
PIP Input
PIPOn PIP ON
PIPOf PIP OFF
PIPFr
PIPIn
PIP Freeze
PIP Input
83
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLER
KEY CODES
CABLE
KEY FUNCTION UNO-S1 CABLE
KEY FUNCTION UNO-S1 CABLE
1
1
Digit 1
Pause
Pause
Recrd
Menu
Pause
2
2
Digit 2
Record
Record
3
3
Digit 3
Menu
Menu, Settings
4
4
Digit 4
Menu Up
Menu Dn
Menu Left
Menu Right
Select
MenuU Menu Up
MenuD Menu Down
MenuL Menu Left
MenuR Menu Right
5
5
Digit 5
6
6
Digit 6
7
7
Digit 7
8
8
Digit 8
Sel
Menu Select
Exit, Cancel
Info, Display, OSD
Guide
9
9
Digit 9
Exit
Exit
0
0
Digit 0
Display
Displ
Guide
Volume Up
Volume Down
Mute
VolUp
VolDn
Mute
Ch Up
Ch Dn
Power
Enter
PrvCh
TVVid
Volume Up
Volume Down
Mute
Guide
Page Up
Page Down
Disk
PageU Page Up
PageD Page Down
Channel Up
Channel Dn
Power
Enter
Channel Up
Channel Down
Power On/Off
Channel Enter
Last Channel
Learned Only
Disk
Learned Only
+100
Plus 10
Pls10
Op/Cl
Open/Close
Random
Track Fwd
Track Rev
Sur On/Off
Sur Mode
Surround Up
Surround Dn
PIP
Learned Only
Randm Learned Only
Prev Channel
TV/Video
TV/VCR
A/B
TkFwd Quick Skip,Advance
TkRev
SurOn
Instant Replay
Day Down
TVVCR Learned Only
A / B Learned Only
TVDVD Learned Only
SurMd Learned Only
TV/DVD
TV/LD
Input
SurUp
SurDn
PIP
Learned Only
Learned Only
Learned Only
Learned Only
Learned Only
TV LD
Input
Learned Only
Bypass, A/B
TV/DSS
Play
TVDSS Learned Only
PIP Move
PIP Swap
Program
Sleep
PIP M
PIP S
Play
Play
Stop
Stop
Stop
Progm Learned Only
Search Fwd
Search Rev
SrchF
SrchR
Fast Forward
Rewind
Sleep
On
Learned Only
On
On, Power On/Off
84
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLER
KEY CODES
CABLE
KEY FUNCTION UNO-S1 CABLE
KEY FUNCTION UNO-S1 CABLE
Off
Off
Off, Power On/Off
Learned Only
Learned Only
Learned Only
Learned Only
Learned Only
Learned Only
Learned Only
Learned Only
Learned Only
Learned Only
Learned Only
PIP Chan Up
PIP Chan Dn
Input 1
PIPCU Learned Only
PIPCD Learned Only
11
11
12
12
In 1
In 2
In 3
In 4
In 5
In 6
In 7
In 8
In 9
In 10
A,VID1,Video,TVp1
13
13
Input 2
B,VID2,TVp2
C,VID3,TVp3
14
14
Input 3
15
15
Input 4
VID4,TVp4
16
16
Input 5
VID5,AV1,VCR,BNC
VID6,AV2,VDP,DVD,DVI
TV, Component
CAB,SAT,S-Video
AV, Tuner
Bright
Dim
Brght
Dim
Close
Open
Halt
Input 6
Input 7
Close
Open
Input 8
Input 9
Halt
Input 10
AUX, RGB
AM/FM
Cue
AM/FM Learned Only
Cue Learned Only
Disk Up
Disk Down
Info
DiskU Learned Only
DiskD Learned Only
Info
Learned Only
External AV Source
Return to Live
PPV (Wink)
Back
External Src
Live/Intro
Menu
Back
ExtSr
Intro
Menu
Back
Fav Channel
Display Fmt
SAP
FavCh Favorite
DFrmt Help
SAP
Slow
Day Up
Slow
Learned Only
PIP On
PIP Off
PIP Freeze
PIP Input
PIPOn Learned Only
PIPOf Learned Only
PIPFr
PIPIn
Learned Only
Learned Only
85
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLER
KEY CODES
VIDEO ACC
KEY FUNCTION UNO-S1 VIDEO ACC
KEY FUNCTION UNO-S1 VIDEO ACC
1
1
Digit 1
Pause
Pause
Recrd
Menu
Pause
2
2
Digit 2
Record
Menu
Record
3
3
Digit 3
Menu, Home
4
4
Digit 4
Menu Up
Menu Dn
Menu Left
Menu Right
Select
MenuU Menu Up
MenuD Menu Dn
MenuL Menu Left
MenuR Menu right
5
5
Digit 5
6
6
Digit 6
7
7
Digit 7
8
8
Digit 8
Sel
Menu Select
9
9
Digit 9
Exit
Exit
Exit, Cancel, Go
Info, Display, OSD
Guide, View
0
0
Digit 0
Display
Guide
Displ
Guide
Volume Up
Volume Down
Mute
VolUp
VolDn
Mute
Ch Up
Ch Dn
Power
Enter
PrvCh
TVVid
Volume Up
Volume Down
Mute
Page Up
Page Down
Disk
PageU Page Up, Scroll Up
PageD Page Dn, Scroll Dn
Channel Up
Channel Dn
Power
Enter
Channel Up
Disk
Learned Only
+100. +10
Channel Down Plus 10
Pls10
Op/Cl
Power On/Off
Channel Enter
Last Channel
Learned Only
Open/Close
Learned Only
Random
Randm Learned Only
TkFwd Skip Up, Next
TkRev Skip Dn, Previous
SurOn Learned Only
SurMd Learned Only
SurUp Learned Only
SurDn Learned Only
Prev Channel
TV/Video
TV/VCR
A/B
Track Fwd
Track Rev
Sur On/Off
Sur Mode
Surround Up
Surround Dn
TVVCR Learned Only
A / B Learned Only
TVDVD Learned Only
TV/DVD
TV/LD
Input
TV LD
Input
Learned Only
TV/Video, DTV PIP
PIP
Learned Only
PIP Move
TV/DSS
Play
TVDSS Learned Only
PIP Move
PIP Swap
Program
Sleep
PIP M
PIP S
Play
Play
PIP Swap
Stop
Stop
Stop
Progm Learned Only
Search Fwd
Search Rev
SrchF
SrchR
Fast Forward
Rewind
Sleep
On
Learned Only
On
On, Power On/Off
86
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLER
KEY CODES
VIDEO ACC
KEY FUNCTION UNO-S1 VIDEO ACC
KEY FUNCTION UNO-S1 VIDEO ACC
Off
Off
Off, Power On/Off
Learned Only
Learned Only
Learned Only
Learned Only
Learned Only
Learned Only
Learned Only
Learned Only
Learned Only
Learned Only
Learned Only
PIP Chan Up
PIP Chan Dn
Input 1
PIPCU PIP Channel Up
11
11
PIPCD PIP Channel Down
12
12
In 1
In 2
In 3
In 4
In 5
In 6
In 7
In 8
In 9
In 10
VID1,Video,TVp1
VID2,TVp2
13
13
Input 2
Input 3
VID3,TVp3
14
14
Input 4
VID4,TVp4
15
15
VID5,AV1,VCR,BNC
VID6,AV2,VDP,DVD,DVI
TV, Component
CAB,SAT,S-Video
AV, Tuner
Input 5
16
16
Input 6
Bright
Dim
Brght
Dim
Close
Open
Halt
Input 7
Input 8
Close
Open
Input 9
Input 10
AUX, RGB
Halt
AM/FM
Cue
AM/FM Learned Only
Cue
Learned Only
Disk Up
Disk Down
Info
DiskU
DiskD
Info
Learned Only
Learned Only
Learned Only
External Src
Live/Intro
Menu
Back
ExtSr
Intro
Ext. Antenna, Web
Learned Only
Menu
Back
Setup,Prgrm,Options
Learned Only
Fav Channel
Display Fmt
SAP
FavCh Favorites
DFrmt
SAP
Fmt,Wide,16:9,Aspct
Language, MTS
Learned Only
Slow
Slow
PIP On
PIP Off
PIP Freeze
PIP Input
PIPOn PIP ON
PIPOf
PIPFr
PIPIn
PIP OFF
PIP Freeze
PIP Input
87
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLER
KEY CODES
SAT/ DSS
KEY FUNCTION UNO-S1 SAT/DSS
KEY FUNCTION UNO-S1 SAT/DSS
1
1
2
3
4
5
6
7
8
9
0
Digit 1
Digit 2
Digit 3
Digit 4
Digit 5
Digit 6
Digit 7
Digit 8
Digit 9
Digit 0
Pause
Pause
Recrd
Menu
MenuU
MenuD
MenuL
MenuR
Sel
Pause
2
Record
Record
3
Menu
Menu (PVR, Tivo)
Menu Up
4
Menu Up
Menu Dn
Menu Left
Menu Right
Select
5
Menu Down
6
Menu Left
7
Menu Right
8
Menu Select
Exit, Cancel
Info, Display, OSD
Guide
9
Exit
Exit
0
Display
Displ
Volume Up
Volume Down
Mute
VolUp Volume Up
Guide
Guide
PageU
PageD
Disk
VolDn Volume Down
Page Up
Page Down
Disk
Page Up,ThumbsUp
Page Dn,ThumbsDn
Learned Only
+100
Mute
Mute
Channel Up
Channel Dn
Power
Enter
Ch Up Channel Up
Ch Dn Channel Down
Power Power On/Off
Plus 10
Pls10
Op/Cl
Randm
TkFwd
TkRev
SurOn
SurMd
SurUp
SurDn
PIP
Open/Close
Random
Track Fwd
Track Rev
Sur On/Off
Sur Mode
Surround Up
Surround Dn
PIP
Learned Only
Learned Only
Quick Skip,Advance
Instant Replay
Learned Only
Learned Only
Learned Only
Learned Only
Learned Only
Learned Only
Learned Only
Learned Only
Learned Only
On, Power On/Off
Enter
Channel Enter
Prev Channel
TV/Video
TV/VCR
A/B
PrvCh Last Channel
TVVid Learned Only
TVVCR Learned Only
A / B
Learned Only
TV/DVD
TV/LD
Input
TVDVD Learned Only
TV LD Learned Only
Input
TV/DSS/SAT
TV/DSS
Play
TVDSS Learned Only
PIP Move
PIP Swap
Program
Sleep
PIP M
PIP S
Progm
Sleep
On
Play
Stop
Play
Stop
Stop
Search Fwd
Search Rev
SrchF Fast Forward
SrchR Rewind
On
88
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLER
KEY CODES
SAT/ DSS
KEY FUNCTION UNO-S1 SAT/DSS
KEY FUNCTION UNO-S1 SAT/DSS
Off
Off
Off, Power On/Off
Learned Only
Learned Only
Learned Only
Learned Only
Learned Only
Learned Only
Learned Only
Learned Only
Learned Only
Learned Only
Learned Only
PIP Chan Up
PIP Chan Dn
Input 1
PIPCU
PIPCD
In 1
Learned Only
Learned Only
VID1,Video,TVp1
VID2,TVp2
11
11
12
12
13
13
Input 2
In 2
14
14
Input 3
In 3
VID3,TVp3
15
15
Input 4
In 4
VID4,TVp4
16
16
Input 5
In 5
VID5,AV1,VCR,BNC
VID6,AV2,VDP,DVD,DVI
TV, Component
CAB,SAT,S-Video
AV, Tuner
Bright
Dim
Brght
Dim
Close
Open
Halt
Input 6
In 6
Input 7
In 7
Close
Open
Input 8
In 8
Input 9
In 9
Halt
Input 10
In 10
AUX, RGB
AM/FM
Cue
AM/FM Learned Only
Cue
Learned Only
Learned Only
Learned Only
Learned Only
External AV Source
Return to Live
Menu (DTV)
Back
Disk Up
Disk Down
Info
DiskU
DiskD
Info
External Src
Live/Intro
Menu
Back
ExtSr
Intro
Menu
Back
Fav Channel
Display Fmt
SAP
FavCh Favorite
DFrmt Fmt,Wide,16:9,Aspct
SAP
Slow
Alt/Audio,Lang.,CC
Slow
Slow
PIP On
PIP Off
PIP Freeze
PIP Input
PIPOn Learned Only
PIPOf
PIPFr
PIPIn
Learned Only
Learned Only
Learned Only
89
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLER
KEY CODES
VCR
KEY FUNCTION UNO-S1 VCR
KEY FUNCTION UNO-S1 VCR
Pause
Pause
Recrd
Menu
MenuU
MenuD
MenuL
MenuR
Sel
Pause
1
1
Digit 1
Record
Record
2
2
Digit 2
Menu
Menu (PVR,Tivo)
Menu Up
3
3
Digit 3
Menu Up
Menu Dn
Menu Left
Menu Right
Select
4
4
Digit 4
Menu Down
5
5
Digit 5
Menu Left
6
6
Digit 6
Menu Right
7
7
Digit 7
Menu Select
Exit, Cancel
8
8
Digit 8
Exit
Exit
9
9
Digit 9
Display
Displ
Display, OSD, Info
Guide,VCR+,Prgrm
Thmubs Up
0
0
Digit 0
Guide
Guide
PageU
PageD
Disk
Volume Up
Volume Down
Mute
VolUp
VolDn
Mutte
Volume Up
Volume Down
Mute
Page Up
Page Down
Disk
Thmubs Down
Learned Only
+100
Channel Up
Channel Dn
Power
Enter
Ch Up Channel Up
Plus 10
Pls10
Op/Cl
Randm
TkFwd
TkRev
SurOn
SurMd
SurUp
SurDn
PIP
Ch Dn Channel Down
Open/Close
Random
Track Fwd
Track Rev
Sur On/Off
Sur Mode
Learned Only
Learned Only
QuickSkip/Adv,Indx TrkUp
Instnt Rplay,Indx Trk Dn
Learned Only
Learned Only
Learned Only
Learned Only
Learned Only
Learned Only
Learned Only
Learned Only
Learned Only
On, Power On/Off
Power
Enter
Power On/Off
Channel Enter
Prev Channel
TV/Video
TV/VCR
A/B
PrvCh Last Channel
TVVid Learned Only
TVVCR Learned Only
A / B Learned Only
TV/DVD
TV/LD
Input
TVDVD Learned Only Surround Up
TV LD Learned Only Surround Dn
Input
TV/VCR
PIP
TV/DSS
Play
TVDSS Learned Only PIP Move
PIP M
PIP S
Progm
Sleep
On
Play
Play
PIP Swap
Program
Sleep
Stop
Stop
Stop
Search Fwd
Search Rev
SrchF
SrchR
Fast Forward
Rewind
On
90
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLER
KEY CODES
VCR
KEY FUNCTION UNO-S1 VCR
KEY FUNCTION UNO-S1 VCR
Off
Off
Off, Power On/Off
Learned Only
Learned Only
Learned Only
Learned Only
Learned Only
Learned Only
Learned Only
Learned Only
Learned Only
Learned Only
Learned Only
PIP Chan Up
PIP Chan Dn
Input 1
PIPCU Learned Only
PIPCD Learned Only
11
11
12
12
In 1
In 2
In 3
In 4
In 5
In 6
VID1,Video,TVp1
VID2,TVp2
13
13
Input 2
14
14
Input 3
VID3,TVp3
15
15
Input 4
VID4,TVp4
16
16
Input 5
VID5,AV1,VCR,BNC
VID6,AV2,VDP,DVD,DVI
TV, Component
CAB,SAT,S-Video
AV, Tuner
Bright
Dim
Brght
Dim
Close
Open
Halt
Input 6
Input 7
In 7
In 8
In 9
In 10
Close
Open
Input 8
Input 9
Halt
Input 10
AUX, RGB
AM/FM
Cue
AM/FM Learned Only
Cue
Learned Only
Learned Only
Learned Only
Learned Only
Input Select
Return to Live,Auto Track
Menu
Disk Up
Disk Down
Info
DiskU
DiskD
Info
External Src
Live/Intro
Menu
Back
ExtSr
Intro
Menu
Back
FavCh
DFrmt
SAP
Clear
Replay Zones, Indx Mark
Record Speed
SAP, CC
Fav Channel
Display Fmt
SAP
Slow
Slow
Slow
PIP On
PIP Off
PIP Freeze
PIP Input
PIPOn Learned Only
PIPOf
PIPFr
PIPIn
Learned Only
Learned Only
Learned Only
91
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLER
KEY CODES
LASER DISC
KEY FUNCTION UNO-S1 LASER DISC
KEY FUNCTION UNO-S1 LASER DISC
1
1
Digit 1
Pause
Pause Pause
2
2
Digit 2
Record
Recrd
Menu
Learned Only
Menu, Program
3
3
Digit 3
Menu
4
4
Digit 4
Menu Up
Menu Dn
Menu Left
Menu Right
Select
MenuU Menu Up
MenuD Menu Down
MenuL Menu Left
MenuR Menu Right
5
5
5Digit 5
6Digit 6
Digit 7
6
6
7
7
8
8
Digit 8
Sel
Menu Select
9
9
Digit 9
Exit
Exit
Exit, Cancel
0
0
Digit 0
Display
Displ
Guide
Display, OSD, Info
Learned Only
Volume Up
Volume Down
Mute
VolUp
VolDn
Mute
Volume Up
Volume Down
Mute
Guide
Page Up
Page Down
Disk
PageU Disk Skip, Disk Up
PageD Disk Down
Channel Up
Channel Dn
Power
Enter
Ch Up Learned Only
Ch Dn Learned Only
Disk
Learned Only
+10
Plus 10
Pls10
Op/Cl
Power
Enter
Power On/Off
Learned Only
Open/Close
Random
Track Fwd
Track Rev
Sur On/Off
Sur Mode
Surround Up
Surround Dn
PIP
Learned Only
Randm Learned Only
TkFwd Chapter/Skip Up
TkRev Chapter/Skip Down
SurOn Audio
Prev Channel
TV/Video
TV/VCR
A/B
PrvCh Repeat
TVVid
Learned Only
TVVCR Learned Only
A / B
Learned Only
SurMd Learned Only
SurUp Learned Only
SurDn Learned Only
TV/DVD
TV/LD
Input
TVDVD Learned Only
TV LD Learned Only
Input
TV,LD,Input Select
PIP
PIP M Learned Only
PIP S Learned Only
Progm Learned Only
Learned Only
TV/DSS
Play
TVDSS Learned Only
PIP Move
PIP Swap
Program
Sleep
Play
Play
Stop
Stop
Stop
Search Fwd
Search Rev
SrchF
SrchR
Chapter/Skip Up
Chapter/Skip Dn
Sleep
On
Learned Only
On
On, Power On/Off
92
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLER
KEY CODES
LASER DISC
KEY FUNCTION UNO-S1 LASER DISC
KEY FUNCTION UNO-S1 LASER DISC
Off
Off
Off, Power On/Off
Learned Only
Learned Only
Learned Only
Learned Only
Learned Only
Learned Only
Learned Only
Learned Only
Learned Only
Learned Only
Learned Only
PIP Chan Up
PIP Chan Dn
Input 1
PIPCU Learned Only
PIPCD Learned Only
11
11
12
12
In 1
In 2
In 3
In 4
In 5
In 6
VID1,Video,TVp1
VID2,TVp2
13
13
Input 2
14
14
Input 3
VID3,TVp3
15
15
Input 4
VID4,TVp4
16
16
Input 5
VID5,AV1,VCR,BNC
VID6,AV2,VDP,DVD,DVI
TV, Component
CAB,SAT,S-Video
AV, Tuner
Bright
Dim
Brght
Dim
Close
Open
Halt
Input 6
Input 7
In 7
In 8
In 9
In 10
Close
Open
Input 8
Input 9
Halt
Input 10
AUX, RGB
AM/FM
Cue
AM/FM Learned Only
Cue
Learned Only
Learned Only
Learned Only
Learned Only
Ext AV Src,CDV,VCD,Karaok
Disk Up
Disk Down
Info
DiskU
DiskD
Info
External Src
Live/Intro
Menu
Back
ExtSr
Intro
Intro,Search,Scan
Learned Only
Learned Only
Mark
Menu
Back
FavCh
DFrmt
SAP
Fav Channel
Display Fmt
SAP
Learned Only
Subtitle, CC
Slow
Slow
Slow
PIP On
PIP Off
PIP Freeze
PIP Input
PIPOn
PIPOf
PIPFr
PIPIn
Learned Only
Learned Only
Learned Only
Learned Only
93
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLER
KEY CODES
DVD
KEY FUNCTION UNO-S1 DVD
KEY FUNCTION UNO-S1 DVD
1
1
Digit 1, Traack 1
Digit 2, Track 2
Digit 3, Track 3
Digit 4, Track 4
Digit 5, Track 5
Digit 6, Track 6
Digit 7, Track 7
Digit 8,Track 8
Digit 9, Track 9
Digit 0, Track 10
Volume Up
Pause
Pause Pause
2
2
Record
Recrd
Menu
Record
3
3
Menu
Disk Menu
4
4
Menu Up
Menu Dn
Menu Left
Menu Right
Select
MenuU Menu Up
MenuD Menu Dn
MenuL Menu Left
MenuR Menu right
5
5
6
6
7
7
8
8
Sel
Menu Select
Exit, Cancel, Return
Display, OSD, Info
Title
9
9
Exit
Exit
0
0
Display
Displ
Guide
Volume Up
Volume Down
Mute
VolUp
VolDn
Mute
Guide
Volume Down
Mute
Page Up
Page Down
Disk
PageU Disk Skip, Disk Up
PageD Disk Down
Channel Up
Channel Dn
Power
Enter
Ch Up Channel Up
Disk
Learned Only
+100. +10
Ch Dn Channel Down
Plus 10
Pls10
Op/Cl
Power
Enter
Power On/Off
Channel Enter
Open/Close
Random
Track Fwd
Track Rev
Sur On/Off
Sur Mode
Surround Up
Surround Dn
PIP
Learned Only
Randm Learned Only
TkFwd Chapter/Skip Up
TkRev Chapter/Skip Down
SurOn Audio, Language
SurMd Learned Only
SurUp Learned Only
SurDn Learned Only
Prev Channel
TV/Video
TV/VCR
A/B
PrvCh Last Channel,Repeat
TVVid Learned Only
TVVCR Learned Only
A / B Learned Only
TV/DVD
TV/LD
Input
TVDVD Learned Only
TV LD Learned Only
Input
TV/DVD,Input Select
PIP
PIP M Learned Only
PIP S Learned Only
Progm Learned Only
Learned Only
TV/DSS
Play
TVDSS Learned Only
PIP Move
PIP Swap
Program
Sleep
Play
Play
Stop
Stop
Stop
Search Fwd
Search Rev
SrchF
SrchR
Fast Forward
Rewind
Sleep
On
Learned Only
On
On, Power On/Off
94
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLER
KEY CODES
DVD
KEY FUNCTION UNO-S1 DVD
KEY FUNCTION UNO-S1 DVD
Off
Off
Off, Power On/Off
Learned Only
Learned Only
Learned Only
Learned Only
Learned Only
Learned Only
Learned Only
Learned Only
Learned Only
Learned Only
Learned Only
PIP Chan Up
PIP Chan Dn
Input 1
PIPCU Learned Only
PIPCD Learned Only
11
11
12
12
In 1
In 2
In 3
In 4
In 5
In 6
VID1,Video,TVp1
VID2,TVp2
13
13
Input 2
14
14
Input 3
VID3,TVp3
15
15
Input 4
VID4,TVp4
16
16
Input 5
VID5,AV1,VCR,BNC
VID6,AV2,VDP,DVD,DVI
TV, Component
CAB,SAT,S-Video
AV, Tuner
Bright
Dim
Brght
Dim
Close
Open
Halt
Input 6
Input 7
In 7
In 8
In 9
In 10
Close
Open
Input 8
Input 9
Halt
Input 10
AUX, RGB
AM/FM
Cue
AM/FM Learned Only
Cue
Learned Only
Learned Only
Learned Only
Learned Only
External AV Source
Intro,Search,Scan
Setup Menu
Clear
Disk Up
Disk Down
Info
DiskU
DiskD
Info
External Src
Live/Intro
Menu
Back
ExtSr
Intro
Menu
Back
FavCh
DFrmt
SAP
Fav Channel
Display Fmt
SAP
Mark
Format Wide,Zoom,Aspect
Subtitle, CC
Slow
Slow
Slow
PIP On
PIP Off
PIP Freeze
PIP Input
PIPOn Learned Only
PIPOf
PIPFr
PIPIn
Learned Only
Learned Only
Learned Only
95
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLER
KEY CODES
RECEIVER
KEY FUNCTION UNO-S1 RECEIVER
KEY FUNCTION UNO-S1 RECEIVER
Pause
Pause
Recrd
Menu
Pause
1
1
Digit 1
Record
Record
2
2
Digit 2
Menu
Disk menu, Menu
3
3
Digit 3
Menu Up
Menu Dn
Menu Left
Menu Right
Select
MenuU Menu Up, Adjust Up
MenuD Menu Dn, Adjust Dn
MenuL Menu Left
4
4
Digit 4
5
5
Digit 5
6
6
Digit 6
MenuR Menu Right
7
7
Digit 7
Menu Select, Continue
Exit, Cancel
Display, OSD, Info
Title
Sel
8
8
Digit 8
Exit
Exit
9
9
Digit 9
Display
Displ
Guide
0
0
Digit 0
Guide
Volume Up
Volume Down
Mute
VolUp
VolDn
Mute
Ch Up
Ch Dn
Power
Enter
PrvCh
TVVid
Volume Up
Volume Down
Mute
Page Up
Page Down
Disk
PageU Adjust Up
PageD Adjust Down
Disk
Learned Only
Band, FM/AM
Learned Only
Channel Up
Channel Dn
Power
Enter
Preset Up
Preset Down
Power On/Off
5.1, Prologic
Last Channel, Repeat
Learned Only
Plus 10
Pls10
Op/Cl
Open/Close
Random
Track Fwd
Track Rev
Sur On/Off
Sur Mode
Surround Up
Surround Dn
PIP
Randm Random
TkFwd Skip Up
Prev Channel
TV/Video
TV/VCR
A/B
TkRev
SurOn
Skip Down
Srrd Mode/On Off,Aduo Lang
TVVCR Learned Only
A / B Learned Only
TVDVD Learned Only
SurMd Learned Only
TV/DVD
TV/LD
Input
SurUp
SurDn
PIP
Learned Only
Learned Only
Learned Only
Learned Only
Learned Only
TV LD
Input
Learned Only
DVD/Tuner,Input Select
TV/DSS
Play
TVDSS Learned Only
PIP Move
PIP Swap
Program
Sleep
PIP M
PIP S
Play
Play
Stop
Stop
Stop
Progm Learned Only
Search Fwd
Search Rev
SrchF
SrchR
Fast Forward
Rewind
Sleep
On
Learned Only
On
On, Power On/Off
96
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLER
KEY CODES
RECEIVER
KEY FUNCTION UNO-S1 RECEIVER
KEY FUNCTION UNO-S1 RECEIVER
Off
Off
Off, Power On/Off
Learned Only
Learned Only
Learned Only
Learned Only
Learned Only
Learned Only
Learned Only
Learned Only
Learned Only
Learned Only
Learned Only
PIP Chan Up
PIP Chan Dn
Input 1
PIPCU Learned Only
PIPCD Learned Only
11
11
12
12
In 1
In 2
In 3
In 4
In 5
In 6
In 7
In 8
In 9
In 10
CD
13
13
Input 2
Tuner
14
14
Input 3
DVD, LD
15
15
Input 4
VCR, VID1
VID5,AV1,VCR,BNC
TV, VID2
16
16
Input 5
Bright
Dim
Brght
Dim
Close
Open
Halt
Input 6
Input 7
LD, VID3
Close
Open
Input 8
AUX, VID4
DAT, Cable
Phono SAT
Input 9
Halt
Input 10
AM/FM
Cue
AM/FM Learned Only
Cue
Learned Only
Learned Only
Learned Only
Learned Only
External AV Source
Intro,Search,Scan
Menu
Disk Up
Disk Down
Info
DiskU
DiskD
Info
External Src
Live/Intro
Menu
Back
ExtSr
Intro
Menu
Back
Clear
Fav Channel
Display Fmt
SAP
FavCh Mark
FormatWide,Zoom,Aspect
DFrmt
SAP
Learned Only
Slow
Slow
Slow
PIP On
PIP Off
PIP Freeze
PIP Input
PIPOn Learned Only
PIPOf
PIPFr
PIPIn
Learned Only
Learned Only
Learned Only
97
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLER
KEY CODES
AMP/ MISC AUDIO
KEY FUNCTION UNO-S1 AMP/MISC AUDIO KEY FUNCTION UNO-S1 AMP/MISC AUDIO
1
1
Digit 1
Pause
Pause
Recrd
Menu
Pause
2
2
Digit 2
Record
Record
3
3
Digit 3
Menu
Menu, Program
4
4
Digit 4
Menu Up
Menu Dn
Menu Left
Menu Right
Select
MenuU Menu Up, Adjust Up
MenuD Menu Dn, Adjust Dn
MenuL Menu Left
5
5
Digit 5
6
6
Digit 6
7
7
Digit 7
MenuR Menu Right
8
8
Digit 8
Sel
Menu Select, Cont
Exit, Cancel
9
9
Digit 9
Exit
Exit
0
0
Digit 0
Display
Displ
Guide
Display, OSD, Info
Learned Only
Volume Up
Volume Down
Mute
VolUp
VolDn
Mute
Volume Up
Volume Down
Mute
Guide
Page Up
Page Down
Disk
PageU Adjust Up
PageD Adjust Down
Channel Up
Channel Dn
Power
Enter
Ch Up Preset Up
Disk
Learned Only
Band, FM/AM
Learned Only
Ch Dn Preset Down
Power Power On/Off
Plus 10
Pls10
Op/Cl
Open/Close
Random
Track Fwd
Track Rev
Sur On/Off
Sur Mode
Surround Up
Surround Dn
PIP
Enter
5.1, Prologic
Randm Learned Only
TkFwd Skip Up
Prev Channel
TV/Video
TV/VCR
A/B
PrvCh Repeat
TVVid Learned Only
TVVCR Learned Only
TkRev Skip Down
Srrd Mode/On Off,Aduo Lang
SurOn
A / B
Learned Only
SurMd Learned Only
SurUp Learned Only
SurDn Learned Only
TV/DVD
TV/LD
Input
TVDVD Learned Only
TV LD Learned Only
Input
Bypass,Input Slct
PIP
Learned Only
Learned Only
Learned Only
TV/DSS
Play
TVDSS Learned Only
PIP Move
PIP Swap
Program
Sleep
PIP M
PIP S
Play
Play
Stop
Stop
SrchF
Stop
Progm Learned Only
Search Fwd
Search Rev
Fast Forward
Sleep
On
Learned Only
SrchR Rewind
On
On, Power On/Off
98
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLER
KEY CODES
AMP/ MISC AUDIO
KEY FUNCTION UNO-S1 AMP/MISC AUDIO KEY FUNCTION UNO-S1 AMP/MISC AUDIO
Off
Off
Off, Power On/Off
Learned Only
Learned Only
Learned Only
Learned Only
Learned Only
Learned Only
Learned Only
Learned Only
Learned Only
Learned Only
Learned Only
PIP Chan Up
PIP Chan Dn
Input 1
PIPCU Learned Only
PIPCD Learned Only
11
11
12
12
In 1
In 2
In 3
In 4
In 5
In 6
In 7
In 8
In 9
In 10
CD
13
13
Input 2
Tuner
14
14
Input 3
DVD, LD
TAPE, MD
VCR, VID1
TV, VID2
LD, VID3
AUX, VID4
DAT, Cable
Phono, SAT
15
15
Input 4
16
16
Input 5
Input 6
Bright
Dim
Brght
Dim
Close
Open
Halt
Input 7
Input 8
Close
Open
Input 9
Input 10
Halt
AM/FM
Cue
AM/FM Learned Only
Cue
Learned Only
Learned Only
Learned Only
Learned Only
External AV Source
Intro,Search,Scan
Learned Only
Clear
Disk Up
Disk Down
Info
DiskU
DiskD
Info
External Src
Live/Intro
Menu
Back
ExtSr
Intro
Menu
Back
FavCh
DFrmt
SAP
Fav Channel
Display Fmt
SAP
Learned Only
Learned Only
Learned Only
Learned Only
Learned Only
Learned Only
Learned Only
Learned Only
Slow
Slow
PIP On
PIP Off
PIP Freeze
PIP Input
PIPOn
PIPOf
PIPFr
PIPIn
99
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLER
KEY CODES
CD
KEY FUNCTION UNO-S1 CD
KEY FUNCTION UNO-S1 CD
Pause
Pause Pause
Digit 1, Track 1,Dsc1
Digit 2, Track 2,Dsc2
Digit 3, Track 3,Dsc3
Digit 4, Track 4,Dsc4
Digit 5, Track 5,Dsc5
Digit 6, Track 6,Dsc6
1
1
Record
Menu
Recrd
Menu
Record
2
2
Disk, Edit
3
3
Menu Up
Menu Dn
Menu Left
MenuU Menu Up
MenuD Menu Down
MenuL Menu Left
MenuR Menu Right
4
4
5
5
6
6
Digit 7, Track 7,Dsc7 Menu Right
Digit 8,Track 8,Dsc8 Select
Digit 9, Track 9,Dsc9 Exit
7
7
Sel
Menu Select, Cont
8
8
Exit
Exit, Cancel
9
9
Digit 0, Trck10,Dsc10 Display
Displ
Guide
Display, OSD, Info
Group,Magazine
0
0
Guide
Volume Up
Volume Down
Mute
VolUp
VolDn
Mute
Ch Up
Ch Dn
Power
Enter
PrvCh
TVVid
Volume Up
Volume Down
Mute
Page Up
Page Down
Disk
PageU Disk Skip, Disk Up
PageD Disk Down
Disk
Learned Only
+10, +100
Channel Up
Channel Dn
Power
Enter
Learned Only
Learned Only
Power On/Off
Set
Plus 10
Pls10
Op/Cl
Open/Close
Random
Track Fwd
Track Rev
Sur On/Off
Sur Mode
Surround Up
Surround Dn
PIP
Learned Only
Randm Learned Only
TkFwd Skip Up
Prev Channel
TV/Video
TV/VCR
A/B
Repeat
TkRev Skip Down
SurOn Learned Only
SurMd Learned Only
SurUp Learned Only
SurDn Learned Only
Learned Only
TVVCR Learned Only
A / B Learned Only
TVDVD Learned Only
TV/DVD
TV/LD
Input
TV LD
Input
Learned Only
DVD/Tuner Input Select
PIP
PIP M Learned Only
PIP S Learned Only
Progm Learned Only
Learned Only
TV/DSS
Play
TVDSS Learned Only
PIP Move
PIP Swap
Program
Sleep
Play
Play
Stop
Stop
Stop
Search Fwd
Search Rev
SrchF
SrchR
Fast Forward
Rewind
Sleep
On
Learned Only
On
On, Power On/Off
100
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLER
KEY CODES
CD
KEY FUNCTION UNO-S1 CD
KEY FUNCTION UNO-S1
CD
Off
Off
Off, Power On/Off PIP Chan Up
PIPCU
PIPCD
In 1
Learned Only
Learned Only
CD
11
11
Learned Only
Learned Only
Learned Only
Learned Only
Learned Only
Learned Only
Learned Only
Learned Only
Learned Only
Learned Only
Learned Only
Learned Only
Learned Only
Learned Only
Learned Only
Learned Only
CD/CDR/MD,Input Select
PIP Chan Dn
Input 1
Input 2
Input 3
Input 4
Input 5
Input 6
Input 7
Input 8
Input 9
Input 10
12
12
13
13
In 2
Tuner
14
14
In 3
DVD, LD
Tape, MD
VCR, VID1
TV, VID2
LD, VID3
AUX, VID4
DAT, Cable
Phono, SAT
15
15
In 4
16
16
In 5
In 6
Bright
Dim
Brght
Dim
In 7
In 8
Close
Open
Close
Open
Halt
In 9
In 10
Halt
AM/FM
Cue
AM/FM
Cue
Disk Up
Disk Down
Info
DiskU
DiskD
Info
External Src
Live/Intro
Menu
Back
ExtSr
Intro
Menu
Back
FavCh
DFrmt
SAP
Slow
PIPOn
PIPOf
PIPFr
PIPIn
Intro,Search,Scan
Menu, Program
Track, Clear
Fav Channel
Display Fmt
SAP
Finalize, Index
Learned Only
Learned Only
Learned Only
Learned Only
Learned Only
Learned Only
Learned Only
Slow
PIP On
PIP Off
PIP Freeze
PIP Input
101
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLER
KEY CODES
HOME CONTROL
KEY FUNCTION UNO-S1 HOME CONTROL
KEY FUNCTION UNO-S1 HOME CONTROL
Pause
Pause
Recrd
Menu
Pause
Record
Menu
1
1
Digit 1
Record
2
2
Digit 2
Menu
3
3
Digit 3
Menu Up
Menu Dn
Menu Left
Menu Right
Select
MenuU Menu Up, Mode
MenuD Menu Dn, Timer
MenuL Menu Left,Oscillate
MenuR Menu Right,Speed
4
4
Digit 4
5
5
Digit 5
6
6
Digit 6
7
7
Digit 7
Sel
Menu Select, Light
Exit, Cancel
8
8
Digit 8
Exit
Exit
9
9
Digit 9
Display
Displ
Guide
Learned Only
Learned Only
0
0
Digit 0
Guide
Volume Up
Volume Down
Mute
VolUp
VolDn
Mute
Ch Up
Ch Dn
Power
Enter
PrvCh
TVVid
Volume Up
Volume Down
Mute
Page Up
Page Down
Disk
PageU Learned Only
PageD Learned Only
Disk
Learned Only
Learned Only
Learned Only
Channel Up
Channel Dn
Power
Enter
Bright,Raise Up
Dim,Lower Down
Power On/Off
Learned Only
Learned Only
Learned Only
Plus 10
Pls10
Op/Cl
Open/Close
Random
Track Fwd
Track Rev
Sur On/Off
Sur Mode
Surround Up
Surround Dn
PIP
Randm Learned Only
TkFwd Learned Only
Prev Channel
TV/Video
TV/VCR
A/B
TkRev
SurOn
SurMd
SurUp
SurMd
PIP
Learned Only
Learned Only
Learned Only
Learned Only
Learned Only
Learned Only
Learned Only
Learned Only
Learned Only
Learned Only
On, Power On/Off
TVVCR Learned Only
A / B Learned Only
TVDVD Learned Only
TV/DVD
TV/LD
Input
TV LD
Input
Learned Only
Home, Source
TV/DSS
Play
TVDSS Learned Only
PIP Move
PIP Swap
Program
PIP M
PIP S
Progm
Sleep
On
Play
Play
Stop
Stop
Stop
Search Fwd
Search Rev
SrchF
SrchR
Fast Forward,Open Sleep
Rewind, Close On
102
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLER
KEY CODES
HOME CONTROL
KEY FUNCTION UNO-S1 HOME CONTROL KEY FUNCTION UNO-S1 HOME CONTROL
Off
Off
Off, Power On/Off
Learned Only
Learned Only
Learned Only
Learned Only
Learned Only
Learned Only
Learned Only
Learned Only
Learned Only
Learned Only
Learned Only
PIP Chan Up
PIP Chan Dn
Input 1
PIPCU
PIPCD
In 1
Learned Only
11
11
Learned Only
12
12
Source/Scene 1
Source/Scene 2
Source/Scene 3
Source/Scene 4
Source/Scene 5
Source/Scene 6
Source/Scene 7
Source/Scene 8
Source/Scene 9
Source/Scene 10
13
13
Input 2
In 2
14
14
Input 3
In 3
15
15
Input 4
In 4
16
16
Input 5
In 5
Input 6
In 6
Bright
Dim
Brght
Dim
Close
Open
Halt
Input 7
In 7
Input 8
In 8
Close
Open
Input 9
In 9
Input 10
In 10
Halt
AM/FM
Cue
AM/FM Learned Only
Cue
Learned Only
Learned Only
Learned Only
Learned Only
External Source
Learned Only
Learned Only
Learned Only
Learned Only
Learned Only
Learned Only
All On
Disk Up
Disk Down
Info
DiskU
DiskD
Info
External Src
Live/Intro
Menu
Back
ExtSr
Intro
Menu
Back
FavCh
DFrmt
SAP
Fav Channel
Display Fmt
SAP
Slow
Slow
PIP On
PIP Off
PIP Freeze
PIP Input
PIPOn Learned Only
PIPOf
PIPFr
PIPIn
Learned Only
Learned Only
Learned Only
103
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLER
SOURCE NAMES
UNO-S1
Aux
UNO-S2
UNO-S1
UNO-S2
CustomName3
CustomName4
CustomName5
CustomName6
CustomName7
CustomName8
CustomName9
CustomName10
Dance Music
Digitl Cable
UNO-S1
DVD 3
FDoor
Hers
UNO-S2
DVD Player 3
Front Door
Her Music
His Music
Intrnet Radio
Jazz
AUX
AUX 1
Aux 1
Aux 2
Blues
Cable
Cbl 1
AUX 2
Blues
His
Cable
www.
Jazz
Cable 1
Cbl 2
Cable 2
Kids
Kids Music
Laser Disk
Media Server
Media Svr 1
Media Svr 2
Media Svr 3
Mini Disk
Cbl 3
Cable 3
LD
CDCh
CDCh1
CDCh2
CDCh3
CD
CD Changer
CD Changer 1
CD Changer 2
CD Changer 3
CD Player
CD Player 1
CD Player 2
CD Player 3
Classical
Dance
DigCb
DSS
MSrvr
MSvr1
MSvr2
MSvr3
MiniD
Misc
DSS Receiver
DSS 1
DSS 1
DSS 2
DSS 3
DVDCh
DVDC1
DVDC2
DVDC3
DVD
DSS 2
CD 1
DSS 3
Misc Lrnd IR
Mood Music
MorningMusic
MP3
CD 2
DVD Changer
DVD Changr1
DVD Changr2
DVD Changr3
DVD Player
Mood
MornM
MP3
CD 3
Class
Compr
Cntry
Computer
Country
Oldes
Pop
Oldies
Pop
CustomName1
CustomName2
DVD 1
DVD 2
DVD Player 1
DVD Player 2
RDoor
Relig
Rear Door
Religious
104
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLER
SOURCE NAMES
UNO-S1
RepTV
Rock
Sat
UNO-S2
ReplayTV
Rock
UNO-S1
Tun 1
Tun 2
Tun 3
TV
UNO-S2
Tuner 1
Tuner 2
Tuner 3
TV
Satellite
Satellite 1
Satellite 2
Satellite 3
Sat Radio
Source 1
Source 2
Source 3
Source 4
Source 5
Source 6
Source 7
Source 8
Special
Sat 1
Sat 2
Sat 3
SatRd
Src 1
Src 2
Src 3
Src 4
Src 5
Src 6
Src 7
Src 8
Spcl
VCR
VCR
VCR 1
VCR 2
<XM>
XM 1
XM 2
XM 3
XM
VCR 1
VCR 2
<<<XM>>>
XM 1
XM 2
XM 3
XM Radio
Tape
Tape
Tape1
Tape2
TiVo
Tape 1
Tape 2
TIVO
Tuner
Tuner
105
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLER
SETUP FORMS
106
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLER
SETUP FORMS
107
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLER
SETUP FORMS
108
Download from Www.Somanuals.com. All Manuals Search And Download.
SAMPLE CONFIGURATIONS
MULTIPLE CONTROLLERS WITH ONE TUNER
Sharing a single CAM6.6T (internal tuner) with multiple
controllers
Output/ Input Switch = Internal Source Output
RCA cable connected to Source 1
This arrangement can support up to six CAM6.6 units
for up to 36 zones/ 6 sources. Each additional
CAM6.6 must have an incremental Controller ID # and
RNET link. Audio from the source tuner can be split if
shared by all controllers.
CAM6.6 (no tuner installed) -
Controller Setup Menu: Controller ID = 2
Source Setup Menu: Basic Setup Procedure:
Source # = 1; Source Name = Tuner;
Command Type = Peripheral
CAM6.6T -
Output/ Input Switch = Input
Controller Setup Menu: Controller ID = 1
Peripheral Setup Menu: Controller ID = All Controllers
RCA cable connected to Source 1
102.5
102.5
102.5
UNO-S1
CAM6.6 Back Panel (Controller ID 1)
CAM6.6
102.5
102.5
102.5
UNO-S1
CAM6.6 Back Panel (Controller ID 2)
CAM6.6
109
Download from Www.Somanuals.com. All Manuals Search And Download.
SAMPLE CONFIGURATIONS
MULTIPLE CONTROLLERS WITH ST2 DUAL TUNER
Sharing an ST2 Dual Tuner with multiple CAM6.6 con-
trollers (no built-in tuners)
to Source 1 input on CAM6.6 (1)
RCA cable connected from ST2 Tuner 2 audio output
to Source 2 input on CAM6.6 (1)
The configuration below is suitable for 7 to 12 zones
that can all access the ST2 Dual Tuner. This configura- CAM6.6 (no tuner installed) -
tion uses RCA “Y” cables from the ST2 Tuner source
outputs to connect to both CAM6.6 source inputs.
Controller Setup Menu: Controller ID = 2
Source Setup Menu: Basic Setup Procedure:
Source # = 1; Source Name = Tuner 1;
Command Type = Peripheral
CAM6.6 (no tuner installed) -
Controller Setup Menu: Controller ID = 1
Source Setup Menu: Basic Setup Procedure:
Source # = 1; Source Name = Tuner 1;
Command Type = Peripheral
Source # = 2; Source Name = Tuner 2;
Command Type = Peripheral
Source # = 2; Source Name = Tuner 2;
Command Type = Peripheral
Output/ Input Switch = Input
RCA cable connected from ST2 Tuner 1 audio output
to Source 1 input on CAM6.6 (2)
RCA cable connected from ST2 Tuner 2 audio output
to Source 2 input on CAM6.6 (2)
Output/ Input Switch = Input
RCA cable connected from ST2 Tuner 1 audio output
ST2 Dual Tuner Back Panel
LOOP
LOOP
Serial#
TUNER
2
TUNER
1
ST2 Smart Tuner
NEWMARKET, NH U.S.A.
ANTENNA
ANTENNA
FM COAX
FM COAX
AUDIO OUTPUT
AUDIO OUTPUT
LINK
RS-232
KEYPAD PORTS
L
R
L
R
INTERFACE
IR
IR
12VDC 1.5A
IN
OUT
RCA “Y”Cable
UNO-S1 Keypads
102.5
102.5
RCA Cable
RCA Cable
CAM6.6
CAM6.6 Back Panel
(Controller ID 1)
102.5
102.5
UNO-S1 Keypads
CAM6.6
CAM6.6 Back Panel (Controller ID 2)
110
Download from Www.Somanuals.com. All Manuals Search And Download.
SAMPLE CONFIGURATIONS
MULTIPLE CONTROLLERS WITH THREE TUNERS
Sharing an ST2 Dual Tuner with multiple CAM6.6 con-
to Source 2 input on CAM6.6T (1)
trollers (with and without tuners)
RCA cable connected from ST2 Tuner 2 audio output
to Source 3 input on CAM6.6T (1)
The configuration below is suitable for 7 to 12 zones
that can access the ST2 Dual Tuner and the CAM6.6T
tuner. This configuration uses RCA “Y” cables from the
ST2 Tuner source outputs to connect to both CAM6.6
source inputs.
CAM6.6 (no tuner installed) -
Controller Setup Menu: Controller ID = 2
Source Setup Menu: Basic Setup Procedure:
Source # = 1; Source Name = Tuner 1;
Command Type = Peripheral
CAM6.6T -
Source # = 2; Source Name = Tuner 2;
Command Type = Peripheral
Source # = 3; Source Name = Tuner 3;
Command Type = Peripheral
Controller Setup Menu: Controller ID = 1
Peripheral Setup Menu: Controller ID = All Controllers
Source Setup Menu: Basic Setup Procedure:
Source # = 2; Source Name = Tuner 2;
Command Type = Peripheral
Source # = 3; Source Name = Tuner 3;
Command Type = Peripheral
Output/ Input Switch = Internal Source Output
RCA cable connected from Source 1 audio output on
CAM6.6T (1) to Source 1 input on CAM6.6 (2)
RCA cable connected from ST2 Tuner 1 audio output
Output/ Input Switch = Input
RCA cable connected from Source 1 audio output on
CAM6.6T (1) to Source 1 input on CAM6.6 (2)
RCA cable connected from ST2 Tuner 1 audio output
to Source 2 input on CAM6.6 (2)
RCA cable connected from ST2 Tuner 2 audio output
to Source 3 input on CAM6.6 (2)
ST2 Dual Tuner Back Panel
LOOP
LOOP
Serial#
TUNER
2
TUNER
1
ST2 Smart Tuner
NEWMARKET, NH U.S.A.
ANTENNA
ANTENNA
FM COAX
AUDIO OUTPUT
FM COAX
AUDIO OUTPUT
LINK
RS-232
KEYPAD PORTS
L
R
L
R
INTERFACE
IR
IR
12VDC 1.5A
IN
OUT
RCA “Y”Cable
UNO-S1
102.5
102.5
RCA Cable
RCA Cable
CAM6.6
CAM6.6 Back Panel
(Controller ID 1)
92.5
92.5
UNO-S1
CAM6.6
CAM6.6 Back Panel (Controller ID 2)
111
Download from Www.Somanuals.com. All Manuals Search And Download.
TECHNICAL SPECIFICATIONS
Dimensions:
Weight:
17"W x 12"D x 3.5"H (43 x 30.5 x 9 cm)
18 lbs. (8.1 kg)
Power Supply:
Fuse Rating:
110 or 240 VAC
110V input; F3A H 250V US and Canada
240V input; T1.25A H 250V Europe
20Hz-20kHz +/ - 1dB
20 Watts RMS into 8 Ohms
<0.05%
Frequency Response:
Watts per channel:
THD+N:
Signal to Noise Ratio:
Audio Source Inputs:
Input Impedance:
Audio Zone Outputs:
>88dB
6 (including internal tuner)
50 kohm
6 Speaker Level (8 Ohms)
(2 Line Level)
Max Source Audio Input:
Max Zone Variable Line Audio Output:
Max Zone Fixed Line Audio Output:
Trigger Outputs:
2.2 Vrms
2.2 Vrms
2.2 Vrms
1 Common. 12VDC 100mA
1 Home Theater 12VDC max
Trigger Inputs:
Frequency Range:
AM 530 - 1710 kHz
FM 87.7 - 107.9 MHz
AM: 300 Ohm balanced
FM: 75 Ohm unbalanced
AM: 20dB 55dBu
FM: 30dB 6dB max 12dBu
AM: 33dB
Antenna impedance:
Impedance:
Sensitivity @ S/ N:
Image rejection:
S/ N ratio:
FM: 80 DB
AM: 45 dB
FM: 60 DB
112
Download from Www.Somanuals.com. All Manuals Search And Download.
WARRANTY & REPAIR
The Russound CAM6.6 is fully guaranteed against all defects in materials and workmanship for two (2)
years from the date of purchase. During this period, Russound will replace any defective parts and
correct any defect in workmanship without charge for either parts or labor.
For this warranty to apply, the unit must be installed and used according to its written instructions. If
service is necessary, it must be performed by Russound. The unit must be returned to Russound at
the owner's expense and with prior written permission. Accidental damage and shipping damage are
not considered defects, nor is damage resulting from abuse or from servicing by an agency or per-
son not specifically authorized in writing by Russound.
This Warranty does not cover:
• Damage caused by abuse, accident, misuse, negligence,
or improper installation or operation
• Power surges and lightning strikes
• Normal wear and maintenance
• Products that have been altered or modified
• Any product whose identifying number, decal, serial number, etc.
has been altered, defaced or removed
Russound sells products only through authorized Dealers and Distributors to ensure that customers
obtain proper support and service. Any Russound product purchased from an unauthorized dealer or
other source, including retailers, mail order sellers and online sellers will not be honored or serviced
under existing Russound warranty policy. Any sale of products by an unauthorized source or other
manner not authorized by Russound shall void the warranty on the applicable product.
Damage to or destruction of components due to application of excessive power voids the warranty on
those parts. In these cases, repairs will be made on the basis of the retail value of the parts and
labor. To return for repairs, the unit must be shipped to Russound at the owner's expense, along with
a note explaining the nature of service required. Be sure to pack the unit in a corrugated container
with at least three (3) inches of resilient material to protect the unit from damage in transit.
Before returning a unit for repair, call Russound at (603) 659-5170 for a Return Authorization number.
Write this number on the shipping label and ship to:
Russound
ATTN: Service
5 Forbes Road
Newmarket, NH 03857
Due to continual efforts to improve product quality as new technology and techniques become avail-
able, Russound/ FMP, Inc. reserves the right to revise system specifications without notice.
113
Download from Www.Somanuals.com. All Manuals Search And Download.
NOTES
114
Download from Www.Somanuals.com. All Manuals Search And Download.
NOTES
115
Download from Www.Somanuals.com. All Manuals Search And Download.
CAM6 .6
Six -Zo n e , Six -So u rce Co n tro lle r
CAM6 .6 T
Six -Zo n e , Six -So u rce AM/ FM Re ce ive r
IN STRUCTIO N MAN UAL
Copyright ©2006 Russound® All rights reserved.
All trademarks are property of their respective owners.
Specifications subject to change without notice.
Russound
5 Forbes Road, Newmarket, NH 03857
tel 603.659.5170 • fax 603.659.5388
e-mail: tech@russound.com
www.russound.com
Russound is not responsible for typographical errors or omissions.
For use with CAM6.6 Rev. 1 Hardware
28-0111
Rev. 2 05/ 11/ 06
Download from Www.Somanuals.com. All Manuals Search And Download.
|
Radio Shack Microcassette Recorder MICRO 36 User Guide
Raypak Boiler 180B User Guide
RCA Clock Radio 7 4825 User Guide
Reebok Fitness Treadmill RBTL19990 User Guide
Renesas Computer Hardware H8S 2472 User Guide
Ricoh Digital Camera CAPLIO G4 WIDE User Guide
RIDGID Impact Driver End Pipe Wrench User Guide
Roberts Radio Radio RD 3 User Guide
Ryobi Saw BT3100 User Guide
SanDisk Network Card Type I II PCI e Interface Cards User Guide