LASER 6+1 Buttons Mouse
RM1670 USER’S MANUAL
Important Ergonomic Information
Some experts believe that using any mouse or trackball may cause serious injury
to hands, wrists, arms, neck, or back. If you feel pain, numbness, or weakness in
these areas, see a qualified health professional.
TO REDUCE THE RISK OF INJURY, FOLLOW THESE PRECAUTIONS:
) Take frequent breaks, get up and walk around several times every hour.
) Vary your tasks throughout the day.
) Keep your shoulders relaxed with your elbows at your side. Position your
keyboard and mouse so you do not have to reach.
) Adjust your chair and keyboard so your upper arms and wrists are straight.
) Avoid resting your wrists on sharp edges.
System Requirement
) 3rd button and wheel function require Win98/2000/ME/NT/XP.
) 4th & 5th button require Win2000/XP to function, or will require to install
additional driver as attached with this product.
) 6th & 7th button require installing additional driver as attached with this
product.
) Mouse is compatible with standard Microsoft mode.
) If your computer’s operating system is Windows 98/ 98SE, please prepare
the Windows98 or 98SE compact disk for system’s request during the
installation of mouse.
Before you begin
) Keep this installation guide for future reference! It contains Important
Troubleshooting Information.
) Keep your old PS/2/ USB mouse as a back-up device.
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Software Installation Guide
Installing the Software
To install the software, please follow the steps below to finish:
1. Insert the Auto-Run CD-ROM onto CD-ROM driver, the installation menu will
be executed automatically. (If the auto-run does not function itself, double-click
the “setup” icon in the CD files.)
2. The setup program will guide you to finish the installation step by step.
3. After finishing the process, select "Restart" to reboot your system and
activate multimedia hot keys and wheel scrolling functions.
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation Guide
Programmable Office-Web Hot Keys
„
When you install the included software driver the mouse hot keys will be enable
with driver default.
„
The Office-Wheel Function is attached on the mouse software as following.
Users can change the default function of wheel and extra hot-keys.
Office-Wheel
Scroll to choose and press to function)
Web-Wheel
„
Default setting for these hot keys is programmable as following as shown on the
application by running the “Office-Web Wheel Centre” as following:
Office-Web
Group Setting
4
Download from Www.Somanuals.com. All Manuals Search And Download.
GENERAL SPECIFICATIONS
) High-tech real 850nm LASER mouse
) 1,200 dpi hardware switching resolution
) 6+1 buttons design with tilt wheel
) Software added-value programmable buttons smart-functions
) Multimedia/ Office/ Web functions buttons design.
) Ergonomic design for comfortable grip
) Compatible with USB 2.0 low-speed protocol
) Right hand Ergonomic design for comfortable grip.
) CE, FCC & eye-Safety certificate
Electromagnetic Characteristics (EMC)
Tested to comply with FCC standards
For home or office use
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.
CE - Type acceptance: EN55022/EN55024 I.T.E. Product
Troubleshooting
1. Mouse does not function
ꢀ
ꢀ
If mouse is not functional, please turn off the computer first.
Check the receiver and make sure it is firmly attached to the USB port of the
computer.
ꢀ
ꢀ
Check the placement of batteries and see if they are properly connecting.
The "+" and "-" on the batteries must match the "+" and "-" on the slots. If
the batteries aren't inserted correctly, the device won't work.
Restart the computer again. If the LED inside the receiver does not light up
ꢀ
when moving the mouse, please re-connect the mouse to the receiver.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢀ
Q: The mouse cursor can only move left & right during operation (it could
be caused by low battery or the optical sensor’s data error).
A: Please take out one of batteries and put it back for a power reset and
then redo the connect procedure.
ꢀ
Q: The mouse does not work after waking up from power off mode by
pressing the connect button once.
A: This might be caused by imprecisely depressing the connect button to
wake up the mouse. Users can gain back normal operation by pressing
connect button on the mouse first, and then pressing the one on the receiver.
As soon as the LED inside the receiver starts flashing, the mouse is ready to
operate.
Optical Sensor Mouse functions best on surfaces with details for tracking. It
may not function on reflective, reflective pattern or non-visible detail surfaces!
2. Reducing Interference with Other Wireless Devices
„
Reducing Interference with Other Wireless Devices:
All 27MHz radio-based devices are subject to interference from other 27MHz
radio-based devices, such as cordless telephones, cordless baby monitors, and
cordless toys. It may help to move the receiver unit and the base unit of other
wireless devices (such as cordless telephone cradle) as far apart as possible. You
may need to try several times for a location that is best in your operating
environment.
„ Move the receiver and the mouse closer to each other so that the receiver is
relatively shorter in distance to the mouse than to other 27MHz transmitters.
You may need to re-establish the “connection”.
Note: Avoid using this device on a metal surface because a large surface of iron,
aluminum, copper, or other metal may act like a shielding to the RF antenna of the
mouse and the receiver.
3. Interference with other RF wireless mouse
If the interference comes from other same model of RF wireless mice, please
“Setting up connection between mouse and receiver” of the installation guide to
switch to a new RF channel. A new identification code is also generated upon the
completion of channel switching.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Normally, the effective transmission distance is about 3 feet, depending on the
environment. If the effective distance between the mouse and the receiver is bad,
try to change the location of the receiver.
4. If you have difficulty connecting the wireless mouse:
„
Increase the distance between the set of wireless mouse and other radio device
units.
„
Turn off the other wireless devices, or their base units that are in close proximity
to the receiver of this wireless mouse.
„
„
Try connecting the wireless mouse and its receiver again.
To verify that your device is connected and working properly, open a document
and try the device.
Thank you for purchasing a quality Rosewill Product.
support for your product.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
|