Kandy
INTEGRATED CD PLAYER
MkIII
U S E R M A N U A L
R O K S A N A U D I O L I M I T E D
6 NORTHFIELD INDUSTRIAL ESTATE
BERESFORD AVENUE
MIDDLESEX HA0 1NW
ALPERTON
ENGLAND
T E L .
F A X .
+ 4 4 ( 0 ) 2 0 8 9 0 0 6 8 0 1
+ 4 4 ( 0 ) 2 0 8 9 0 0 6 8 0 2
+ 4 4 ( 0 ) 2 0 8 9 0 0 0 7 3 4
Download from Www.Somanuals.com. All Manuals Search And Download.
INTRODUCTION
K a n d y Integrated CD Player
Congratulations on your purchase of the ROKSAN Kandy Integrated CD Player. This CD Player is designed and
manufactured to the highest specification and rigorously tested to reward you many years of listening pleasure.
Your Kandy CD Player is at the heart of your hi-fi system. Its correct installation, set-up and operation will have a
profound influence on the sonic performance of the entire hi-fi installation.
Please read the contents of this manual thoroughly. It will help you to understand your hi-fi equipment better and
enhance your listening pleasure.
This manual is divided into the following sections:
•
•
•
•
•
•
•
•
•
•
•
•
Safety Instructions (Accompanying card)
Safety Certification
Introduction
Cautions
Installation
Setup
Operation
Remote Control
Troubleshooting
Guarantee
Specifications
Notes
UNPACKING
Included in the packing of your Kandy CD Player you will find:
•
•
•
One mains lead fitted with the correct mains power plug for your country
One Kandy MkIII TYPEII System Remote Handset and AA batteries (x2)
One information pack and warranty card
After removing these items please retain all packing materials. Correct packing is necessary for safe
transportation of your Kandy CD Player.
MAINTENANCE
After disconnecting the CD Player from the mains supply, the cabinet and front panel may be cleaned with a
lightly dampened soft cloth or chamois leather. Avoid using abrasives or solvents.
EU DIRECTIVES
This product is designed to comply with the legal provisions of EU Directives 89/3336/EC and 72/23/EC. The
standards which have been applied are those which were in force at the time of the introduction of this product.
This product bears the CE mark.
This product is compliant to EN 60065.
This product must be earthed. Please ensure that other equipment connected to it is earthed according to the
manufacturer’s instructions.
Roksan Audio ltd
Kandy Integrated CD Player MkIII User Manual
CLASSIFICATION: General Use
Version 2.00
All specifications are liable to change without notice. E&OE
Page 3 of 11
ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
CAUTIONS
K a n d y Integrated CD Player
AC MAINS SUPPLY
Your Kandy CD Player is set to operate from a fixed supply voltage which is marked on a label next to the mains
input plug. Before connecting the mains lead please check that your mains supply corresponds to this label as
below:
230V Products ………………………………….Voltage Range: 220V – 240V
115V Products ………………………………….Voltage Range: 110V – 120V
100V Products ………………………………….Voltage Range: 90V – 110V
The mains lead supplied with this product has an IEC mains socket which plugs into the IEC connector on the
unit’s rear panel. The other end is normally attached to the appropriate mains plug for your country. In the UK
this is the standard UK13A plug.
This plug should ordinarily not be removed from the lead. If you do remove it, please dispose of it safely so that it
cannot be plugged into a mains socket whilst in a potentially dangerous condition. We suggest that you obtain
from your dealer a complete replacement lead.
Should you move to another area where either the mains voltage or the mains plugs are different from those as
supplied with your CD Player, please contact the appointed ROKSAN distributor for assistance.
Please observe correct mains polarity at all times.
The CD Player mains fuses are located on the rear panel next to the IEC mains connector. They must only be
replaced by the fuse of the type and rating as described on the fuse rating label on the rear panel of the unit.
This product requires connection to earth (ground). The earth wire (in the UK this is colour coded green/yellow)
of the mains cable supplied with your CD Player must be connected to a suitable earthing point established for
this purpose by your electricity supply company. If you are in any doubt, consult a qualified electrician.
If the equipment is likely to be unused for some time, unplug it from the mains supply.
GENERAL CAUTIONS
FCC WARNING
This equipment may generate or use Radio Frequency energy. The user may lose the right to operate this
equipment if unauthorised modifications are made.
INTERFERENCE
Properly installed, this unit should not cause harmful interference to radio communications, There is, however, no
guarantee that such interference will not occur in a specific installation. If interference arises (which you can
determine by switching the unit off and on) you could try to remedy matters by the following:
•
•
•
•
Re-orient or re-locate the receiving antenna
Increase the distance between the CD Player and receiver
Connect the unit to a different mains circuit from that of the receiver
Consult your ROKSAN appointed dealer or an experienced Radio/TV technician for help and advice
LOCATION
Your Kandy CD Player should be located in a well ventilated area and kept away from sources of heat, dust and
humidity and from direct sunlight.
The CD Player may be positioned either as a free standing unit or alongside another audio/video product.
Never place the CD Player on carpet or any surface likely to hinder normal ventilation.
Never allow liquids or other objects to fall into the unit.
This unit contains no user serviceable parts. Do Not remove any panels or attempt to service it yourself.
Unauthorised servicing will void the warranty.
Roksan Audio ltd
Kandy Integrated CD Player MkIII User Manual
CLASSIFICATION: General Use
Version 2.00
All specifications are liable to change without notice. E&OE
Page 4 of 11
ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION
K a n d y Integrated CD Player
ROKSAN Kandy CD Player- Front Panel View
1
2
3
4
5
6
7
8
ROKSAN
Compact Disc Player KC-I MkIII
1.
2.
3.
4.
5.
6.
7.
8.
Open/Close Button
Stop Button
Play/Pause Button
FL Display
Disc Tray Mechanism Door
Track Back Button
Track Forward Button
Display Time Button
ROKSAN Kandy CD Player - Rear Panel View
1
2
3
4
5
6
1.
2.
3.
4.
5.
6.
Analogue Output (Left & Right)
Digital Outputs (Optical: Toslink; Balanced: AES/EBU; Coaxial: RCA)
AC Mains Power Switch
Voltage & Fuse Rating Label
IEC Mains Inlet Socket
AC Mains Fuseholder
Roksan Audio ltd
Kandy Integrated CD Player MkIII User Manual
CLASSIFICATION: General Use
Version 2.00
All specifications are liable to change without notice. E&OE
Page 5 of 11
ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
SETUP
K a n d y Integrated CD Player
CONNECTING MAINS POWER
Please refer to the rear panel view on page 5.The moulded IEC connector of the supplied mains lead should be
plugged into the socket (5) on the rear of the unit first and then plugged into the mains supply. The Mains power
switch (3) is on the rear panel of the CD Player. This switch is normally left on. If the unit is likely to be
unattended for a long period, switch it off and unplug the mains lead from the wall.
SIGNAL CONNECTIONS
ANALOGUE OUTPUT:
The Analogue Output (1) uses Gold plated RCA Phono sockets and should be
connected to the CD or LINE input of your Preamplifier or Amplifier.
The connection is: Right Channel – Red; Left Channel – White or Black.
DIGITAL OUTPUT:
The Digital Output (2) uses a Gold plated RCA Phono socket for Coaxial SPDIFand
Toslink for Optical and XLR for Balanced AES/EBU output. Any of these could be
connected to a corresponding input of an amplifier with a digital input, or to an
outboard Digital to Analogue converter (DAC).
IMPORTANT NOTE: For optimum performance it is recommended to use high quality inter-connect cables such
as ROKSAN HDC-02A High Definition Analogue Cable and HDC-01D High Definition Coaxial Digital Cable.
OPERATION
K a n d y Integrated CD Player
Please refer to the rear panel view on page 5.
SWITCHING ON
The Mains power switch (3) is located on the rear panel of the CD Player. This switch should be left ON for
normal operation. If unattended for a long period, the Mains power should be switched OFF and the lead
disconnected from the power supply.
When switched ON from the rear panel, your Kandy CD Player FL Display will illuminate.
USING THE CONTROLS
Please refer to the front panel view on page 5.
LOADING A DISC
Press the Open/Close Button (1) once to open the disc loading tray (Display will indicate: open). Carefully load a
disc into the tray recess with the label side up. Press the button again to close the tray.
Note: Never load a disc until the drawer has opened fully, or try to close the drawer until you are sure that the
disc is properly seated in the holder recess.
Warped discs should never be played.
The drawer should only be opened using the front panel control. Under no circumstances should you attempt to
open manually.
If no disc is inserted or if the disc is damaged or inserted upside down, the CD player will remain inoperative
(Display will indicate: no disc).
Roksan Audio ltd
Kandy Integrated CD Player MkIII User Manual
CLASSIFICATION: General Use
Version 2.00
All specifications are liable to change without notice. E&OE
Page 6 of 11
ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
PLAYING A DISC
When a disc has been loaded, your Kandy CD Player will briefly spin the disc while it studies the data encoded
on it. The disc will then stop and the display will indicate the number of tracks on the disc and the total play time.
1
5
2
6
3
7
4
8
TRACK
MIN
SEC
9
10
14
11
15
12
16
TOTAL
13
17
To commence playing a disc, press Play/Pause Button (3) once. The disc will play from the beginning.
Press the Play/Pause button (3) a second time to pause the disc whilst it is playing. Pressing the button again will
resume playback from the point at which Pause mode was entered. In Pause mode, the disc continues spinning
and the laser will still be operational but locked. Please keep the CD player in Pause mode no longer than strictly
necessary.
SELECTING A TRACK
Press the Track Forward Button (7) to go to the next track on the disc. Pressing the Track Back Button (6) will
take you to the previous track.
*****
When the disc is playing, press the Track Back Button once to take you to the beginning of the current
track and a second time to take you to the start of the previous track.
In Play mode press the Track Forward Button (7) to take you forward to the start of the next track.
Once the procedure is complete the disc will commence playing from the selected track.
When a disc is first loaded, you can use these buttons to select your desired track. Having done so, press the
Play/Pause Button and your disc will commence playing from the selected track.
You may select a track when Pause is engaged. In this case, the disc will revert to Pause after the procedure is
complete and you will have to press Play/Pause Button to continue playing the disc.
DISPLAY
Pressing the Time Button (8) on the front panel repeatedly will cycle the display through the following modes:
Normal
Display
Indicates track No. and how
long it has been playing.
2
6
3
7
4
8
5
9
TRACK
INDEX
STEP
MIN
SEC
10
14
11
15
12
16
EACH
13
17
First Press
Display
Indicates track No. and
remaining time on the track.
2
6
3
7
4
8
5
9
TRACK
INDEX
STEP
MIN
SEC
10
14
11
15
12
16
EACH
REMAIN
13
17
Second Press
Display
Indicates number of tracks
and remaining time on the
disc.
2
6
3
7
4
8
5
9
TRACK
MIN
SEC
10
14
11
15
12
16
TOTAL
13
17
REMAIN
Roksan Audio ltd
Kandy Integrated CD Player MkIII User Manual
CLASSIFICATION: General Use
Version 2.00
All specifications are liable to change without notice. E&OE
Page 7 of 11
ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
REMOTE CONTROL
K a n d y Integrated CD Player
Your CD player is supplied with a Kandy MKIII TYPEII System Remote Handset.
The Remote Control Handset is powered by two 1.5V AA batteries (supplied). When inserting the batteries
observe the correct polarity.
The handset duplicates all front panel controls and contains several additional features.
1
2
5
7
3
4
6
8
9
1 MEMORY CHECK
2 MEMORY PROGRAMME
3 INTRO PLAY KEY
4 RANDOM PLAY KEY
5 STOP
10
11
12
6 FAST BACK
7 FAST FORWARD
8 BACK TRACK
9 NEXT TRACK
10 PLAY / PAUSE
11 REPEAT ONE / ALL
12 REPEAT A - B
13 CLEAR
13
14
15
14 +10 KEY
16
15 NUMERIC KEYS
16 CD NUMERIC KEY
SELECTOR
Roksan Audio ltd
Kandy Integrated CD Player MkIII User Manual
CLASSIFICATION: General Use
Version 2.00
All specifications are liable to change without notice. E&OE
Page 8 of 11
ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
REPEAT
There are three repeat functions available on your CD player:
1. To repeat all tracks on the disc press repeat Button (11) 1/ALL. The display will show ‘REPEAT (ALL)’.
2. To repeat one track press repeat Button (11) 1/ALL twice. The display will show ‘REPEAT (ONE)’.
3. To repeat a section:
•
•
•
Press PLAY to start playing the disc
Go to the track at the start of the section
Designate the beginning of the section by pressing repeat Button (12) A-B. The display will show
‘REPEAT (A)’
•
•
Go to the track at the end of the section
Designate the beginning of the section by pressing repeat Button (12) A-B. The display will show
‘REPEAT (B)’
The section selected will play repeatedly until pressing repeat Button (12) A-B again to stop section
repeat.
MEMORY
Pressing the Memory Button (2) lets you select specific tracks and play them in any order. Programming must
be performed in STOP mode.
To programme a sequence:
1
Press Memory Button (2) on the handset.
Display
The word MEMORY lights
and the display flashes
track 1 and step 1 ready for
programming.
MEMORY
TRACK
STEP
2
Select a track from the handset, using the Track Back, Track Forward Buttons (8, 9), or via the Numeric
Keys (15). (For example track 3)
Display
Shows 3 the selected track
and step 2 ready for next
3
MEMORY
TRACK
STEP
track to be programmed.
3
4
Select the next desired track. (For example track 9)
Display
Shows 9 the selected track
3
MEMORY
TRACK
STEP
9
and step 3 ready for next
track to be programmed.
When you have assembled your programme, press the Play Button to start Programme Play.
•
•
•
You can select a track more than once to be played in the programme.
You can press stop and the programme will still remain.
You can check and change programmed tracks in stop mode by pressing the check Button (1) to march
through the programme steps and use the clear Button (13) to delete a track and then select a new track
in its place if you wish.
TO CANCEL A PROGRAMME
Press the clear Button (13) in stop mode and hold for 3 seconds to clear all programmed tracks.
Roksan Audio ltd
Kandy Integrated CD Player MkIII User Manual
CLASSIFICATION: General Use
Version 2.00
All specifications are liable to change without notice. E&OE
Page 9 of 11
ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING
K a n d y Integrated CD Player
If you suspect your ROKSAN Kandy CD Player is not operating properly, first check all the connections carefully.
Pay particular attention to input and output connections. Phono plugs should be fully inserted- a frequent cause
of problems is that Phono plug surrounds do not make proper contact. Below are some commonly encountered
problems with suggestions for possible cure. The list is not exhaustive: If you have any unresolved problems,
please consult your appointed ROKSAN dealer or distributor.
SYMPTOM
LIKELY CAUSE
SUGGESTED REMEDY
The disc tray will not close
Disc not placed properly in tray
Re-place disc properly
when a disc is inserted
Disc is warped
Discard disc
Disc inserts, display does
not show the number of
tracks and playing time
Disc inserted upside down
Disc is dirty or scratched
Condensation on the laser lens
Dirt on the laser lens
Re-insert disc
Clean disc, discard scratched disc
Let CD player warm up and dry out lens
Refer to appointed dealer or service centre
DO NOT use CD lens cleaners
Skipping & mistracking
Excessive vibration
Disc is dirty or scratched
Ensure player is stable and vibration-free
Clean disc, discard scratched disc
Programme play
inoperative
Programming accidentally erased
Re-programme memory
Excessive hum
Connection loose, cable faulty
Interconnect or amplifier faulty
Re-connect plugs, change interconnect
Change lead, try another line input on amp
One channel inoperative
Remote handset operation
erratic or not working
Batteries weak or wrongly inserted
Handset signal path is obstructed
Replace batteries, observe polarity
Remove obstruction, move handset
Handset transmission angle too wide Operate handset in front of CD Player
Room lighting/sunlight excessive
Darken room
GUARANTEE
K a n d y Integrated CD Player
There are no user-serviceable parts inside your Kandy CD Player. If a fault should develop, refer any servicing to
your appointed ROKSAN dealer, distributor or ROKSAN approved service agent.
Your ROKSAN Kandy CD Player is guaranteed against any defect in materials and workmanship for a period of
two years from the date of purchase.
This guarantee only becomes effective if the warranty card is validated by the ROKSAN retailer from whom the
equipment was purchased and returned to ROKSAN within 28 days of purchase.
This guarantee excludes:
1. Damage caused due to accident, misuse, neglect and incorrect installation, adjustment or repair.
2. Liability for damage or loss during transit from the retailer or purchaser to ROKSAN or its authorised
distributor for the purposes of repair or inspection.
Carriage costs to ROKSAN shall be borne by the consignor.
All claims under this guarantee must be made through an authorised ROKSAN retailer.
If equipment returned for repair to ROKSAN is found on inspection to comply with the product specification
ROKSAN reserves the right to make a charge for examination and return carriage.
Unauthorised servicing will void this guarantee.
Roksan Audio ltd
Kandy Integrated CD Player MkIII User Manual
CLASSIFICATION: General Use
Version 2.00
All specifications are liable to change without notice. E&OE
Page 10 of 11
ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFICATIONS
K a n d y Integrated CD Player
Operating System
Frequency Response
Harmonic Distortion
S/N Ratio (IHF-A Wtd.)
Wow & Flutter
CD digital audio system
20Hz – 20kHz ± 0.5dB
< 0.004% @ 1kHz
>100 dB
Quartz precision
100 dB @ 1kHz
2Vrms
Channel Separation
Output Voltage
Digital Outputs
75 Ohm Coaxial, RCA
110 Ohm Balanced AES/EBU, XLR
Optical, Toslink
Error Correction
Sampling Frequency
D/A Conversion
CIRC
44.1 kHz
Dedicated D/A PCB (TD1305T BCC-DAC2)
(Bitstream continuous calibration DAC)
Resolution
Oscillation
Crystal
18 bits
3rd Overtone Oscillation
Super precision, custom made
Power Supply
high performance low noise toroidal transformers
6 fully regulated power rails
Power Source
100V – 120V 50Hz / 60Hz
220V – 240V 50Hz / 60Hz
Power Consumption
Dimension
< 15 W
432 x 380 x 90 (W x D x H) mm
432 x 380 x 102 (including feet)
Weight
9Kg
NOTES
K a n d y Integrated CD Player
Kandy CD Player MkIII
Purchase Date
Serial Number: …………………………
Year .……… Month …….. Day ……..
ROKSAN Retailer
Name:
…………………………………
Location: ………………………………
Please keep a record for future reference
Roksan Audio ltd
Kandy Integrated CD Player MkIII User Manual
CLASSIFICATION: General Use
Version 2.00
All specifications are liable to change without notice. E&OE
Page 11 of 11
ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
|