RD-49
FM RDS/DAB digital radio
Please read this manual before use
Download from Www.Somanuals.com. All Manuals Search And Download.
Controls
(Front)
2
4
5
6
7
3
8
9
1
11
10
1. Speaker
7. On/Off button
8. Volume control
2. Band button
3. LCD display
9. Tuning Up/Down buttons
10. Select button
4. Charge LED indicator
5. Auto Tune button
6. Menu/info button
11. Preset buttons
If.you.need.any.further.advice,.please.call.our.Technical.Helpline.on.:-
Download from Www.Somanuals.com. All Manuals Search And Download.
2
020.8758.0338.(Mon-Fri)
Controls
(Back)
13
14
15
12
12. Battery compartment
13. Telescopic aerial
14. Headphone socket
15. DC jack socket
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Battery operation using alkaline batteries
1. Remove the battery cover on the back of the unit by sliding the cover
in the direction of the arrow.
2. Insert six LR6 (AA size) alkaline batteries into the spaces in the
compartment. Take care to ensure all batteries are inserted with the
correct polarity as shown inside the battery compartment.
1
3. Slide the battery switch to the Alkaline position and then replace the
battery cover.
•
Important: when using alkaline batteries the battery switch must
be placed in the alkaline position. Failure to do so could result
in serious damage to the batteries or radio.
•
•
•
Reduced power, distortion and a ‘stuttering’ sound are all signs that
the batteries may need replacing.
If the radio is not to be used for any extended period of time it is
recommended that the batteries are removed from the radio.
We.would.recommend.for.economy.that.the.RD-49.is.used.via.the.AC.
adaptor.whenever.possible.with.battery.operation.for.occasional.or.
stand-by.use.only..If.extended.listening.using.batteries.is.anticipated,.
then.the.use.of.rechargeable.batteries.is.recommended.
Battery operation using rechargeable batteries
1. Remove the battery cover on the back of the unit by sliding the cover
in the direction of the arrow.
2. Insert six Rechargeable LR6 (AAsize) batteries into the spaces in the
compartment. Take care to ensure all batteries are inserted with the
correct polarity as shown inside the battery compartment. The radio is
designed to be used with Nickel Metal Hydride (NiMH) rechargeable
batteries.
3. SlidethebatteryswitchtotheRechargeablepositionandthenreplace
the battery cover.
continued on next page
If.you.need.any.further.advice,.please.call.our.Technical.Helpline.on.:-
Download from Www.Somanuals.com. All Manuals Search And Download.
4
020.8758.0338.(Mon-Fri)
4. The charge light will flash indicating batteries are charging. Batteries
will be fully charged in around 7 hours.
•
Important: when using rechargeable batteries the battery switch
must be placed in the rechargeable position. Batteries will only
be charged when the radio is switched off and connected to the
AC adaptor.
•
•
Reduced power, distortion and a ‘stuttering’ sound are all signs that
the batteries may need recharging.
If the radio is not to be used for any extended period of time it is
recommended that the batteries are removed from the radio.
Using the AC adaptor
The AC adaptor for use with the RD49 should provide 12 volts DC
output at 500mA centre pin positive.
1. Insert the adaptor plug into the DC in socket on the left hand side of
your radio.
2. Plug the adaptor into a standard 13A mains socket outlet. Whenever
the adaptor is plugged in to the radio and switched on at the mains the
batteriesareautomaticallydisconnected. Iftheadaptorispluggedinto
the radio but not switched on then the radio will run from the batteries
if fitted.
The.AC.adaptor.should.be.disconnected.from.the.mains.supply.and.
the.radio.when.not.in.use.
Download from Www.Somanuals.com. All Manuals Search And Download.
5
Operating your radio - DAB
1. Carefully extend the telescopic aerial.
2
2. Press the On/Off button to switch on your radio. The display will show
"Roberts" for a few seconds.
3. If this is the first time the radio is used a quick scan of UK Band III
DAB channels will be carried out. The display will show "Autotune
Quick scan". If the radio has been used before the last used station
will be selected.
4. During Autotune, as new stations are detected the station counter
on the right hand side of the display will increase and stations will be
added to the list. The top line of the display shows a bargraph indicat-
ing progress of autotune.
5. When the Autotune is completed the first station (in numeric-alpha
order 0...9...A....Z) will be selected.
6. If the station list is still empty after the Autotune your radio will display
"No Signal".
7. If no signals are found it may be necessary to relocate your radio to
a position giving better reception.
If.you.need.any.further.advice,.please.call.our.Technical.Helpline.on.:-
6
Download from Www.Somanuals.com. All Manuals Search And Download.
020.8758.0338.(Mon-Fri)
Selecting a station - DAB
1. The top line of the display shows the name of the station currently
selected.
2. Press the Tuning Up/Down buttons to scroll through the list of avail-
able stations.
2
3. Press and release the Select button to select the station. The display
3
may show "Tuning" while your radio finds the new station.
4. Adjust the Volume control to the required setting.
Note: If after selecting a station the display shows "Not Available" it
may be necessary to relocate your radio to a position giving better
reception.
4
Secondary services - DAB
1. Certainradiostationshaveoneormoresecondaryservicesassociated
with them. If a station has a secondary service associated with it the
display will show ">>" next to the station name on the station list. The
secondary service will then appear immediately after the primary
service as you press the Tuning Up button.
2
2. Press the Select control to select the station.
Download from Www.Somanuals.com. All Manuals Search And Download.
7
Display modes - DAB
a
Your radio has six display modes:-
1. Press and release the Menu/Info button to cycle through the various
1
modes.
a. Scrolling text
Displays scrolling text messages such
as artist/track name, phone in number,
etc.
b
c
b. Programme type
Displays type of station being listened to
e.g. Pop, Classic, News, etc.
c. Multiplex name
d. Signal strength
e. Time and date
Displays name of multiplex to which
current station belongs.
d
e
f
Displays signal strength for station being
listened to.
Displays current time and date.
Displays audio type and bit rate.
f. Audio type and bit rate
If.you.need.any.further.advice,.please.call.our.Technical.Helpline.on.:-
Download from Www.Somanuals.com. All Manuals Search And Download.
8
020.8758.0338.(Mon-Fri)
Finding new stations - DAB
As time passes new stations may become available. To find new stations
proceed as follows:-
1
2
1. Press and release the Auto Tune button, the display will show
"Autotune Quick scan". Your radio will perform a scan of the UK DAB
frequencies. As new stations are found the station counter on the
right-hand side of the display will increase and stations will be added
to the list.
2. TocarryoutafullscanoftheentireDABBandIIIfrequenciespressand
hold down the Auto Tune button for more than 2 seconds and then
release. The display will show "Autotune Full scan". As new stations
are found the station counter on the right-hand side of the display will
increase and stations will be added to the list.
Signal strength display - DAB
1. Press and release the Select button until the display will show signal
strength.
2. Position your radio and carefully angle the telescopic aerial for best
reception using the signal strength display as a guide. Move your
radio around and position so as to give maximum number of black
rectangles on signal strength display. The clear unfilled rectangle
indicates minimum signal level required for satisfactory reception.
1,3
3. Press the Select button to exit the signal strength display.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Manual Tuning - DAB
Manual tuning allows you to tune directly to the various DAB Band III
channels. UK DAB stations are located in the range 11B to 12D.
2
1. Press and hold the Select button until the display shows "Manual
tune". Release the Select button.
1
2. Press either the Tuning Up/Down buttons to select the required DAB
channel.
3. Press and release the Select button to select the required DAB
channel. The open bar in the middle shows you the minimum signal
strength needed for good DAB reception. The signal strength bars will
go up and down showing the changing signal strength as you adjust
the telescopic aerial on your radio.
4. When a DAB signal is found, the display will show the name of the
DAB multiplex. Any new radio stations found will be added to the list
stored in the radio.
3,5
5. Press and release the Select button to return to normal tuning.
Autoselect - DAB
As an alternative to pressing the Select button to select a station your
radio can be set so as to automatically select a station.
1,2,3
1. Press and release either the Tuning Up or Down buttons a few
times, immediately press and hold down the Select button until the
display shows "Autoselect ON".
1,3
2. Press the Tuning buttons until the station you require is visible on
the display. After a few seconds your radio will automatically select
the station shown on the display.
3. To switch off autoselect press and release the Tuning Up or Down
buttons a few times, immediately press and hold down the Select
button until the display shows "Autoselect Off".
If.you.need.any.further.advice,.please.call.our.Technical.Helpline.on.:-
10
Download from Www.Somanuals.com. All Manuals Search And Download.
020.8758.0338.(Mon-Fri)
Dynamic Range Control (DRC) settings - DAB
DRC can make quieter sounds easier to hear when your radio is used in
a noisy environment.
1
1. Press the On/Off button to switch on your radio.
2. Press and hold in the Menu/Info button the display will show
“Software.”
2
3. Press the Tuning Up/Down buttons until the display shows "DRC
value".
4. Press and release the Select button to enter adjustment mode.
3
5. Press the Tuning Up/Down buttons to select required DRC setting
(default is 0) .
4
6
DRC 0 DRC is switched off, Broadcast DRC will be ignored.
DRC 1/2 DRC level is set to 1/2 that sent by broadcaster.
DRC 1 DRC is set as sent by broadcaster.
6. PressandreleasetheSelectbuttontoconfirmthesetting.Thedisplay
will return to normal tuning mode.
5
Note: Not all DAB broadcasts are able to use the DRC function. If the
broadcast does not support DRC, then the DRC setting in the radio will
have no effect.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating your radio - FM
1. Carefully extend the telescopic aerial.
2
2. Press the On/Off button to switch on your radio. The display will show
"Roberts" for a few seconds.
3. Press the Band button to select the FM band.
3
4. Press and release the Select button until the display shows "Auto
tune <>".
5. Press the Tuning Up button your radio will scan in an upwards
direction (low frequency to high frequency) and stop automatically
when it finds a station of sufficient strength.
5
6. After a few seconds the display will update and show station name
(if RDS information is available).
4
7. Press the Tuning Down button to scan the FM band in a downwards
direction (high frequency to low frequency).
8. Whenthewavebandendisreachedyourradiowillrecommencetuning
from the opposite waveband end.
7
9. Adjust the Volume control to the required setting.
10. To switch off your radio press the On/Off button.
If.you.need.any.further.advice,.please.call.our.Technical.Helpline.on.:-
12
Download from Www.Somanuals.com. All Manuals Search And Download.
020.8758.0338.(Mon-Fri)
Manual tuning - FM
1. Press the On/Off button to switch on your radio.
1
2. Press the Band button to select the FM band. Fully extend the Tel-
escopic aerial.
3. Press and release the Select button until the display shows "Manual
tune <>".
2
4. Press either the Tuning Up or Down buttons to tune to a station.
The frequency will change in steps of 50kHz.
5. When the waveband end is reached the radio will recommence tuning
from the opposite waveband end.
4
6. Set the Volume control to the required setting.
3
7. To switch off your radio press the On/Off button.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Display modes - FM
On FM the bottom line of the display can be set to any of the following
modes:-
1. Press the Menu/Info button to cycle through the various modes.
a
b
1
a. Scrolling text
Displays scrolling text messages such
as artist/track name, phone in number
etc.
b. Program Type
c. Time and date
Displays type of station being listened to
e.g. Pop, Classic, News, etc.
c
Displays current time and date.
d
d. Frequency &
audio mode
Displays frequency of the station being
listened to and displays the audio mode,
Auto (stereo) or mono
Note: When tuned to the FM band, information display is only available
when the radio is able to receive RDS information from the broadcaster.
If.you.need.any.further.advice,.please.call.our.Technical.Helpline.on.:-
14
Download from Www.Somanuals.com. All Manuals Search And Download.
020.8758.0338.(Mon-Fri)
Software version
The software display cannot be altered and is just for your reference.
1. Ensure the DAB waveband is selected. To view the software version
on the display press and hold in the Menu/Info button the display
will show “Software.”
1
2. After a few seconds the display will revert to normal tuning mode.
Presetting stations
There are 5 memory presets for each of the two wavebands.
1. Press the On/Off button to switch on your radio.
2. Tune to the required station as previously described.
3
1
3. Press and hold the required Preset button until the display shows e.g.
Preset 1 saved. The station will be stored under the chosen preset
button. Repeat this procedure for the remaining presets.
4. Stations stored in the memories may be overwritten by following the
above procedure.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Recalling a preset
1. Press the On/Off button to switch on your radio.
2. Select the required waveband.
3
1
3. Momentarily press the required Preset button, your radio will tune to
the station stored in preset memory.
System reset
If your radio fails to operate correctly, or some digits on the display are
missing or incomplete carry out the following procedure.
1. Press and hold down the Menu/Info button for 2 seconds "Software"
1
will be displayed.
2. Press the Tuning Up/Down buttons until the display shows "or
SELECT Factory reset".
3. Press in and release the Select button to select System reset.
2
4. Press the Select button, a full reset will be performed.All presets and
3,4
station lists will be erased.
5. After a system reset a scan of the DAB band will be performed.
In case of malfunction due to electrostatic discharge, reset the product
(reconnection of power source may be required) to resume normal
operation.
If a problem persists our technical staff would be pleased to of-
fer any assistance on operating the radio. Our technical helpline
number is 020 8758 0338.
If.you.need.any.further.advice,.please.call.our.Technical.Helpline.on.:-
16
Download from Www.Somanuals.com. All Manuals Search And Download.
020.8758.0338.(Mon-Fri)
Headphone socket
A 3.5mm Headphone Socket located on the left hand side of your radio
is provided for use with either headphones or an earpiece. Inserting a plug
automatically mutes the internal loudspeaker.
Display backlight
1. When using on batteries, the display backlight will be switched on for
approximately 12 seconds when any button is pressed.
2. When your radio is powered by AC mains the display backlight will
always be switched on.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
General
Do not allow this radio to be exposed to water, steam or sand. Do not leave
your radio where excessive heat could cause damage such as in a parked
car where the heat from the sun can build up even though the outside
temperature may not seem too high. It is recommended that the DAB band
beusedwhereverpossibleasbetterresultsintermsofqualityandfreedom
from interference will usually be obtained than on the FM band.
The name plate is located on the back of your radio.
Specifications
Circuit Features
Power Requirements
Mains
AC 230 volts, 50Hz
6 x LR6 (AA size)
only (adaptor)
Loudspeaker
Output Power
75mm
Batteries
1 Watt
Battery Life
Approx. 15 hours of listening for 4 hours a day
at normal volume using alkaline cells.
Headphone socket 3.5mm dia
Aerial System
FM
Telescopic aerial
Telescopic aerial
Frequency Coverage
FM
DAB
DAB
87.5-108MHz
174.928 - 239.200MHz
The Company reserves the right to amend the specification without notice
If.you.need.any.further.advice,.please.call.our.Technical.Helpline.on.:-
Download from Www.Somanuals.com. All Manuals Search And Download.
18
020.8758.0338.(Mon-Fri)
Guarantee
This instrument is guaranteed for twelve months from the date of delivery to the original owner against failure due to faulty workmanship or component
breakdown, subject to the procedure stated below. Should any component or part fail during this guarantee period it will be repaired or replaced free
of charge.
The guarantee does not cover:
1. Damage resulting from incorrect use.
2. Consequential damage.
3. Receivers with removed or defaced serial numbers.
N.B. Damaged or broken telescopic aerials will not be replaced under guarantee.
Procedure:
Any claim under this guarantee should be made through the dealer from whom the instrument was purchased. It is likely that your Roberts' dealer
will be able to attend to any defect quickly and efficiently but should it be necessary the dealer will return the instrument to the Company’s service
department for attention. In the event that it is not possible to return the instrument to the Roberts' dealer from whom it was purchased, please contact
Roberts Radio Technical Services at the address shown on the rear of this manual.
These.statements.do.not.affect.the.statutory.rights.of.a.consumer.
ROBERTS RADIO TECHNICAL SERVICES
97-99 Worton Road
Isleworth Middlesex
TW7 6EG
Technical Helpline :- 020 8758 0338 (Mon-Fri during office hours)
Issue.1
Download from Www.Somanuals.com. All Manuals Search And Download.
|