R9921
Multi-band RDS digital preset world radio
R 9921
Power
Display
ATS - FM/MW
Meter - SW
FM/MW/SW
Preset
+
+
Time Set
Hour
BANDS
FM ST./Mono
Memo
Tuning
Min
StandBy
M
AUTO TUNING SYSTEM
Please read this manual before use
Download from Www.Somanuals.com. All Manuals Search And Download.
Features
z Large easy to read Liquid Crystal Display (LCD)
showing station name, frequency, time, memory
location and function status.
z Wake to radio or buzzer alarms.
z Humane wake system - buzzer alarm gradually
increases in volume.
z RDS station name display.
z Adjustable sleep timer allows you to fall asleep
z Twenty seven memory presets offer instant
access to your favourite stations on MW, SW
and FM.
to music.
z Snooze function - turns off alarm for five
minutes.
z Automatic time set via RDS signal.
z ATS (Auto Tuning System) - scans MW and
FM bands, automatically storing stations in
preset memories.
z Scanning circuit allows you to search for active
stations.
z Memory scan - scans preset memories.
z SW meter button offers instant selection of any
desired SW band.
If you need any further advice, please call our Technical Helpline on :-
020 8758 0338 (Mon-Fri)
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Controls
1. ATS/SW band select
1
2
3
4
5
2. Liquid crystal display.
3. Preset/Hour - button.
4. Preset/Hour + button.
5. Power/Sleep button.
6. Display button.
R 9921
Power
Display
6
7
8
7. Time set button.
ATS
-
FM/MW
-
8. Standby button.
FM/MW/SW
Preset
Hour
+
+
Meter SW
Time Set
BANDS
9. Tuning/Minute + button
10. Tuning/Minute - button
11. Memory button.
FM ST./Mono
Memo
Tuning
Min
StandBy
M
12. Waveband button.
13. Lock button.
AUTO TUNING SYSTEM
14. Stereo/Mono button
13
11
9
14
12
10
2
Download from Www.Somanuals.com. All Manuals Search And Download.
18
19
20
21
15
15. Clock auto adjust switch.
16. Headphone socket.
17. DC input socket.
18. Telescopic aerial.
19. Light button.
16
17
20. Tone control switch.
21. Volume control.
If you need any further advice, please call our Technical Helpline on :-
020 8758 0338 (Mon-Fri)
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Display
A
B
C
D
E
F
G
N
H
I
M
J
L
K
A. Alarm indicators
B. RDS indicator.
F. Time.
K. Memory number.
L. Memory indicator.
G. Key lock indicator.
H. Low battery indicator.
I. SW band
C. Sleep time indicator.
D. Snooze indicator.
E. AM/PM indicators.
M. Frequency and text indicators.
N. Stereo indicator.
J. Frequency units.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing batteries
1. Position the radio face down on soft surface.
2. Press the catch as shown and slide in the
direction of the arrow.
3. Lift out the battery cover
4. Insert 4 x LR6 (AA) size batteries as shown in
the diagram.
5. Replace the battery cover.
If you need any further advice, please call our Technical Helpline on :-
020 8758 0338 (Mon-Fri)
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Battery replacement
The battery indicator will appear in the display
immediately your radio is switched off. Batteries
should be replaced when the indicator shows less than
3. After removing batteries you have approximately 3
minutes to replace the batteries after which clock and
memory information will be lost.
1
2
3
When the low battery indicator
appears in
display replace batteries immediately.
Setting the clock automatically
The clock time can be set automatically when
receiving an RDS station that transmits clock time
(CT). The CT information is transmitted once every
minute. If the station has sufficient signal strength the
clock will set within one or two minutes.
1. Switch on the radio with the Power button.
2. Select the FM waveband by repeat pressing of the
Bands button.
3. Fully extend the Telescopic aerial.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Press and hold down the Tuning up or down
buttons until the frequency in the display begins
to change rapidly, release the button.
5. The radio will now start to search the FM waveband
and will stop when it finds a station of sufficient
strength. If the station is of sufficient strength the
symbol will light up in the liquid crystal
display.
6. Slide the Clock auto adjust switch to the ‘On’
position.
7. The time segments --:-- will flash in the liquid crystal
display indicating that the radio is waiting for the
RDS time signal. When the time is set the display
will show the time. If the clock does not set within
three to four minutes, the radio station may not be
transmitting clock time (CT) information - try another
radio station.
8. When your radio is switched off the
symbol will remain lit indicating that the time has
been set via the RDS signal.
If you need any further advice, please call our Technical Helpline on :-
020 8758 0338 (Mon-Fri)
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the clock time manually
When batteries are installed for the first time the
display will show - - : - -.
Time can be manually set with the radio switched on
or off. The clock uses the 24 hour system e.g. 2:00pm
is shown as 14:00.
1. Slide the Clock auto adjust switch to the ‘Off’
position
2. Press and release the Time set button , the display
will show ‘TIME SET’
.
3. The clock uses the 24 hour system e.g. 2:00pm is
shown as 14:00. Set the correct hour using the Hour
+ and - buttons.
4. Set the correct minute using the Minute + and -
buttons.
5. Press and release the Time set button to complete
time setting.
6. The display will show the correct time.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the buzzer alarm
Note: Clock uses 24 hour system.
1. Repeatedly press and release the Standby
button until the display shows ‘Buzzer’.
2. Whilst the display
symbol
and alarm time are flashing set the required
hour using the Hour + and - buttons.
3. Set the required minute using the Minute +
and - buttons. Press and release the Standby
button to complete alarm setting.
4. At the preselected time the alarm will sound.
The alarm may be turned off for 24 hours by
pressing the Power button.
5. Pressing any other button (except Standby or
) whilst the alarm is sounding will activate
the snooze function. The alarm will be silenced
for 5 minutes.
6. To permanently cancel the alarm repeatedly
press and release the Standby button until the
symbol is removed from the
display.
If you need any further advice, please call our Technical Helpline on :-
020 8758 0338 (Mon-Fri)
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the radio alarm
Note: Clock uses 24 hour system.
1. Repeatedly press and release the Standby
button until the display shows ‘Last CH’.
2. Whilst the display
symbol
is flashing set the required hour using the Hour
+ and - buttons.
3. Set the required minute using the Minute +
and - buttons. Press and release the Standby
button to complete alarm setting.
4. At the preselected time the radio will switch
on to the last station listened to. The alarm
may be turned off for 24 hours by pressing
the Power button.
5. Pressing any other button (except Standby or
) whilst the alarm is sounding will activate
the snooze function. The alarm will be silenced
for 5 minutes.
6. To permanently cancel the alarm repeatedly
press and release the Standby button until the
symbol is removed from the
display.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Search tuning
1. Switch on your radio by pressing the Power
button.
2. Select the required waveband by repeat pressing
of the Bands button. The waveband selected
will appear in the display. On FM and SW fully
extend the Telescopic aerial. On MW rotate
your radio for best reception.
3. Press and hold down either the Tuning + or -
buttons until the frequency in the display begins
to change rapidly. Release the button.
4. Your radio will scan the selected waveband,
stopping each time it finds a station of sufficient
strength. Adjust the Volume and Tone controls
to the required settings.
5. On SW direct access to your chosen band can
be made by repeatedly pressing the Meter -SW
button.
If you need any further advice, please call our Technical Helpline on :-
020 8758 0338 (Mon-Fri)
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Manual tuning
1. Switch on your radio by pressing the Power
button.
2. Select the required waveband by repeat pressing
of the Bands button. The waveband selected
will appear in the display. On FM and SW fully
extend the Telescopic aerial. On MW rotate
your radio for best reception.
3. A single press on either the Tuning + or -
buttons will change the frequency up or down.
The frequency steps are:- FM 50kHz, MW 9kHz
or 10kHz and SW 5kHz. Adjust the Volume and
Tone controls to the required settings.
5. On SW direct access to your chosen band can
be made by repeatedly pressing the Meter -SW
button.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
MW (AM) tuning step size
In Europe and other parts or the world MW tuning
steps are 9kHz, in America the MW tuning step size
is 10kHz.
To change the MW tuning step size from 9KHz to
10KHz proceed as follows:-
1. Switch on your radio and select the MW waveband.
2. Press and hold down the Display button until the
display shows 10 kHz.
3. Press the Display button to confirm the setting.
4. To change back to 9kHz steps - press and hold
down the Display button until the display shows
9 kHz.
5. Press the Display button to confirm the setting.
If you need any further advice, please call our Technical Helpline on :-
020 8758 0338 (Mon-Fri)
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Presetting stations
You may store up to 9 stations on FM, 9 on MW and 9
on SW giving a total of 27 preset stations.
1. Tune into the required station using one of the
tuning methods previously described.
2. Press and release the Memo button, the word
SAVE - -> will appear in the display.
3. Select the preset under which you wish to store
the station using the Preset + and - buttons.
4. Press and release the Memo button to store the
station. The preset number will now appear at the
bottom of the display.
5. Repeat the procedure for the remaining presets.
Note: Presetting of stations can only be carried out
whilst the word SAVE - -> is showing in the display
(5 seconds).
6. If all the preset memory locations are full pushing
the Memo button will cause the display to show
‘FULL. If you still want to store a new station press
the Memo button and continue from step 3.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Recalling a preset station
1. Switch on your radio using the Power button.
2. Select the desired waveband using the Bands
button.
3. Press Preset + or - buttons to cycle through the
available preset stations.
Memory scan
Your radio is equipped with a Memory scan
facility.
1. Press and hold down either the Preset + or -
buttons for at least 2 seconds to start memory
scan. Your radio will scan the available
memories pausing for a few seconds on each
one. To stop memory scan press either the
Preset + or - buttons when the required preset
is reached.
If you need any further advice, please call our Technical Helpline on :-
020 8758 0338 (Mon-Fri)
15
Download from Www.Somanuals.com. All Manuals Search And Download.
ATS (Automatic Tuning System)
The automatic tuning system will scan the
selected waveband and automatically store
stations in the memory presets.
note: ATS operates on FM an MW bands only -
activating the ATS function will overwrite any
stations previously stored in the memory presets
1. Select the required waveband by pressing the
Bands button.
2. Press and hold down the ATS button until
frequency digits in the display begin to change
rapidly. Your radio will scan the selected
waveband and automatically store stations in
memory presets.
ST
MHz
1
2
3
4
5
6
7
8
9
M
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating your radio using RDS (Radio data system)
The Radio Data System (RDS) is a system in which
inaudible digital information is transmitted in addition
to the normal FM radio programme.
1. Switch on your radio and select the FM waveband.
2. Tune into a station, the display will indicate
frequency for a few seconds and then change to
show the station name. The
appear in the display
symbol will
ST
3. If the station does not carry RDS information only
the station frequency will be shown.
MHz
1
2
3
4
5
6
7
8
9
M
Note: the
indicator will flash if the signal
is too weak for RDS operation.
ST
3
M
If you need any further advice, please call our Technical Helpline on :-
020 8758 0338 (Mon-Fri)
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Display Modes (FM only)
1. Whilst tuned to a station displaying its RDS station
name, you can change between station name and
frequency by pressing and releasing the Display
button.
ST
2. The display will show the stations frequency for
approximately 5 seconds before reverting to
showing station name
1
2
3
M
ST
MHz
1
2
3
M
ST
1
2
3
M
18
Download from Www.Somanuals.com. All Manuals Search And Download.
FM stereo/mono button (FM only)
1. If the station being received is weak some hiss may
be audible, to reduce the hiss press the FM ST/
Mono button to switch to mono mode. The stereo
indicator will be removed from the display.
2. Press the FM ST/Mono button to return to FM
stereo operation.
Note: FM stereo is only available when using
earphone/headphones
Setting the sleep timer
Your radio can be set to turn off after a preset time
has elapsed.
1. Ensure that your radio is switched off.
ST
2. Press and hold down the Power button until the
desired time is reached (maximum 90 minutes in
15 minute steps). The radio will switch off after the
sleep time has elapsed.
3. To cancel the sleep function before the preset time
has expired, press the Power button.
If you need any further advice, please call our Technical Helpline on :-
020 8758 0338 (Mon-Fri)
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Display backlight
1. Pressing the Light button will switch on the
display backlight and illuminate the display for
approximately 7 seconds.
Lock button
The Lock button is used to prevent
unintentional operation.
1. Press the Lock button , the
symbol
will appear in the display. The Power and
all other buttons will be disabled. This will
prevent accidental operation when the radio
is packed in a suitcase.
2. To release the lock function press the Lock
button, the
symbol will be removed
from the display.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Using an AC adaptor (not included)
The AC adaptor for use with the R9921 should provide
6 volts DC output at 300mA centre pin negative
(Roberts type PU6-B).
Insert the adaptor plug into the DC socket (18) on the
left side of the radio. Plug the adaptor into a standard
13A mains socket outlet. Whenever the adaptor is
used the batteries are automatically disconnected.
The AC adaptor should be disconnected from the
mains supply when not in use.
We would recommend for economy that the R9921
be used via an AC adaptor whenever possible with
battery operation for occasional or stand-by use
only.
If you need any further advice, please call our Technical Helpline on :-
020 8758 0338 (Mon-Fri)
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Headphones
Headphones or earphones for use with your radio
should be stereo and fitted with a 3.5mm stereo jack
plug. Insert the headphone plug into the
socket
on the left side of the radio. When the headphones
are plugged in the loudspeaker is automatically
disconnected.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting/Reset button
If your radio fails to operate correctly, or some digits
on the display are missing or incomplete carry out
the following procedure.
1. Switch off the radio and remove the batteries.
2. With the aid of a suitable implement (the end of a
paper clip) press the reset button located in the
battery compartment for at least 5 seconds, this
will reset the microprocessor, clock time and clear
all stations stored in preset memory.
If a problem persists our technical staff would be
pleased to help offer any assistance on operating the
radio. Our technical helpline number is: 020 8758
0338.
If you need any further advice, please call our Technical Helpline on :-
020 8758 0338 (Mon-Fri)
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Power requirements
Sockets
DC
6.0V
@ 300mA
Headphone socket
DC input socket
3.5mm dia stereo.
centre pin negative
6.0 volts centre pin negative.
Batteries
4 x IEC size LR6 (AAsize)
Frequency Range FM
87.5 -108.0MHz
Battery Life Approx. 20hrs of listening when
used for 4 hours a day at normal
MW 522
or
-
-
1710kHz
1710KHz
volume using alkaline batteries.
520
Loudspeaker:
Output power:
8 ohms
SW
5.90 - 17.90MHz
250mW.
49m 5.90
41m 7.10
31m 9.40
-
-
-
6.20MHz
7.35MHz
9.90MHz
25m 11.60 - 12.10MHz
21m 13.57 - 13.87MHz
19m 15.10 - 15.80MHz
16m 17.48 - 17.90MHz
The company reserves the right to amend the specification without notice.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Guarantee
This radio is guaranteed for twelve months from the date of delivery to the original owner against failure due to faulty
workmanship or component breakdown, subject to the procedure stated below. Should any component or part fail
during this guarantee period it will be repaired or replaced free of charge.
The guarantee does not cover:
1. Damage resulting from incorrect use.
2. Consequential damage.
3. Receivers with removed or defaced serial numbers.
N.B. Damaged or broken telescopic aerials will not be replaced under guarantee.
Procedure: Any claim under this guarantee should be made through the dealer from whom the instrument was
purchased. It is likely that your Roberts' dealer will be able to attend to any defect quickly and efficiently but should it
be necessary the dealer will return the instrument to the company’s service department for attention. In the event that
it is not possible to return the instrument to the Roberts' dealer from whom it was purchased, please contact Roberts
Radio service department at the address shown on the rear of this manual before taking further action.
These statements do not affect the statutory rights of a consumer.
If you need any further advice, please call our Technical Helpline on :-
020 8758 0338 (Mon-Fri)
25
Download from Www.Somanuals.com. All Manuals Search And Download.
ROBERTS RADIO TECHNICAL SERVICES DEPARTMENT
97-99 Worton Road
Isleworth Middlesex
TW7 6EG
Technical Helpline :- 020 8758 0338 (Mon-Fri during office hours)
Issue 3
Download from Www.Somanuals.com. All Manuals Search And Download.
|