R94LSe (VB2735WD-US)
Temperature controlled, continuous flow, gas hot water system;
certified for installation in manufactured (mobile) homes
Type of Appliance
REU-VB2735WD-US
Forced combustion
Rinnai Model Number
Operation
9,900 - 199,000 BTU/h (Natural Gas)
10,300 - 199,000 BTU/h (Propane)
Minimum/Maximum Gas Rate (Input)
Appliance:
Controller:
AC 120 Volts - 60 Hz
DC 12 Volts
Electrical
Electrical Consumption
Normal
Standby
49 watts
2 watts
Anti-frost protection
104 watts
Direct electronic ignition
Ignition System
Minimum flow rate: 0.26 GPM
Hot Water Capacity
Minimum activation flow rate: 0.4 GPM
Maximum flow rate: 9.4 GPM (35° F rise)
98° - 120° F (factory default) Maximum temperature is selectable at
120° F or at 140° F; 98° - 185° F available with the MCC-91
controller for commercial and hydronic applications
Temperature
120° F (factory default)
Temperature (without remote)
Approved Gas Types
Installation
Natural or Propane (ensure unit matches gas type)
Outdoor only
Natural Gas: 0.82
Natural Gas: 83%
Propane: 0.82
Energy Factor
Propane: 83%
Thermal Efficiency
Service Connections
Gas supply: 3/4 inch MNPT
Cold water inlet: 3/4 inch MNPT
Hot water outlet: 3/4 inch MNPT
Water flow sensor, electronic water control device and fixed by-pass
20 - 150 PSI (recommended 30-80 PSI for maximum performance)
Water Flow Control
Minimum/Maximum Water Supply Pressure
R94LSe VB SP
8/2010
© 2010 Rinnai Corporation
Download from Www.Somanuals.com. All Manuals Search And Download.
|