Riccar Vacuum Cleaner R20D User Guide

R20S, R20D, R20P & R20UP  
O w n e r ’ s M a n u a l  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Contents  
Getting Started  
Important Safety Instructions ....................................................................................................  
Polarization Instructions...............................................................................................................  
State of California Proposition 65 Warnings ........................................................................  
Description of the Vacuum.........................................................................................................  
Assembling the Vacuum..............................................................................................................  
2
3
3
4
6
Operation  
Unwinding the Power Cord ......................................................................................................  
Reclining the Handle .................................................................................................................  
Turning the Vacuum On/Off ....................................................................................................  
Using the Carpet/Floor Selector ............................................................................................  
Edge Cleaning ............................................................................................................................  
Automatic Carpet Height Adjustment ...................................................................................  
Vacuuming Under Furniture .....................................................................................................  
Carrying the Vacuum .................................................................................................................  
7
7
7
8
8
8
9
9
Attachment Cleaning  
Wand Cleaning ........................................................................................................................... 10  
Adjusting the Suction Power for Tool Cleaning ................................................................. 10  
Cleaning Tools ............................................................................................................................ 11  
Maintenance and Care  
Annual Checkup ......................................................................................................................... 12  
Power Cord Care........................................................................................................................ 12  
When to Change the Vacuum Bag ....................................................................................... 13  
Replacing the Vacuum Bag ...................................................................................................... 14  
When to Change the Filters ..................................................................................................... 15  
Replacing the HEPA Media or Foam Filter .......................................................................... 15  
Replacing the Electrostatic Secondary Filter ...................................................................... 16  
Jammed Brushroll ....................................................................................................................... 17  
Lifetime Belt ................................................................................................................................. 17  
Removing and Reinstalling the Bottom Plate ...................................................................... 18  
Unclogging the Nozzle and Hose ........................................................................................... 19  
Thermal Motor Protection ......................................................................................................... 20  
Problem Solving Guide  
Troubleshooting .......................................................................................................................... 21  
Visit Riccar Vacuums Online ................................................................................................... 21  
How to Contact Your Authorized Retailer ............................................................................ 21  
Key Replacement Parts ............................................................................................................ 21  
For Best Performance ............................................................................................................... 21  
Warranty ......................................................................................................................................... 22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1
IMPoRtAnt sAFetY InstRUCtIons  
When using an electrical appliance, basic precautions should always be followed, including  
the following:  
READ ALL INSTRUCTIONS BEFORE  
USING THIS APPLIANCE  
The manufacturer cannot accept responsibility for damage  
caused when the appliance is not used according to the  
instructions or for uses other than those for which it  
was intended.  
IMPoRtAnt:  
To reduce the risk of fire, electric shock or injury:  
• Do not leave appliance when plugged in.  
Unplug from outlet when not in use and  
before servicing.  
• Do not handle plug or appliance with  
wet hands.  
• Do not put any object into openings. Do  
not use with any opening blocked; keep  
free of dust, lint, hair and anything that may  
reduce air flow.  
Do not use outdoors or on wet surfaces.  
• Do not allow to be used as a toy. Close  
attention is necessary when used by or  
near children.  
• Keep hair, loose clothing, fingers and all  
parts of body away from openings and  
moving parts.  
• Use only as described in this manual.  
Use only manufacturer’s recommended  
attachments.  
• Do not pick up anything that is burning or  
smoking, such as cigarettes, matches or  
hot ashes.  
• Do not use with damaged cord or plug.  
If appliance is not working as it should,  
has been dropped, damaged, left  
outdoors, or dropped into water, return  
it to your Authorized Riccar Retailer  
for service.  
• Do not use without vacuum bag and/or  
filters in place.  
• Turn off all controls before unplugging.  
• Use extra care when cleaning on stairs.  
• Do not pull or carry by cord, use cord as  
a handle, close a door on the cord, or pull  
cord around sharp edges or corners. Do  
not run appliance over cord. Keep cord  
away from heated surfaces.  
• Do not use to pick up flammable or  
combustible liquids such as gasoline or  
use in areas where they may be present.  
• Do not unplug by pulling on cord. To  
• Do not attempt to service the unit while  
unplug, grasp the plug, not the cord.  
appliance is plugged in.  
sAVe tHese InstRUCtIons.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2
PolARIzAtIon InstRUCtIons  
Power Cord, 2-Wire Polarized Cord  
To reduce the risk of electric shock, this product is equipped with a polarized alternating  
current line plug (a plug having one blade wider than the other). This plug will fit into the  
power outlet only one way. This is a safety feature. If you are unable to insert the plug fully  
into the outlet, try reversing the plug. If the plug should still fail to fit, contact a qualified  
electrician to replace the obsolete outlet. Do not defeat the safety purpose of the  
polarized plug.  
State of California Proposition 65 Warnings:  
WARNING: This product contains one or more chemicals known to the State of California to  
cause cancer.  
WARNING: This product contains one or more chemicals known to the State of California to  
cause birth defects or other reproductive harm.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3
DesCRIPtIon oF tHe VACUUM  
1
2
11  
3
12  
14  
13  
4
5
15  
16  
17  
18  
19  
6
10  
7
8
9
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4
DesCRIPtIon oF tHe VACUUM  
1
2
Ergonomic Handle  
Main On/Off Power Switch  
Power Cord  
3
4
Carrying Handle (Located Behind Bag Compartment Cover)  
Bag Compartment Latch (to Replace Vacuum Bag and Filters)  
Xenon Headlight  
5
6
7
Brushroll Jam Indicator (models R20P and R20UP)  
Vacuum Nozzle  
8
9
Furniture Guard  
10  
11  
12  
13  
14  
15  
16  
17  
18  
19  
20  
Carpet/Floor Selector (models R20D, R20P and R20UP)  
Quick Release Upper Cord Hook  
Wand Release Button  
Telescopic Wand  
Full Bag Indicator (models R20D, R20P and R20UP)  
Suction Control Dial  
Wand Extension Button  
Crevice Tool  
Combination Dusting/Upholstery Brush  
Thermal Motor Protection Reset Button  
Handle Release Pedal  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5
AsseMBlInG tHe VACUUM  
Attaching the Handle to the Vacuum  
NOTE: Do not plug in the vacuum until it  
is completely assembled.  
The vacuum cleaner and the handle are  
packed separately.  
• Remove the handle screw (Fig.1).  
Then position the handle behind the  
vacuum cleaner and level with the top of  
the unit. Hold the power cord down and  
away from the vacuum while the handle is  
being attached. Make sure that the switch  
on the handle is positioned toward the  
front of the vacuum cleaner.  
Fig. 1  
• On the bottom of the handle are two  
“T-shaped” rails that slide forward onto  
two guides located on the top of the  
vacuum cleaner. Line up the handle so  
that the “T-shaped” rails will slide into  
the guides and push the handle  
downward into the vacuum (Fig. 2).  
Fig. 2  
• Insert the handle screw and tighten  
securely (Fig. 3).  
• Remove the bag compartment cover to  
ensure a vacuum bag is in place.  
• Your vacuum is now ready for use.  
• If storing the vacuum, wrap the cord  
clockwise around the top and bottom cord  
hooks. Fasten the plug to the wrapped  
cord using the channel on the plug.  
Fig. 3  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6
oPeRAtIon  
This vacuum is intended for household use only.  
Unwinding the Power Cord  
• The Quick Release Upper Cord Hook  
rotates to allow for quick access to the  
power cord. Turn the Upper Cord Hook  
downward and you can quickly drop the  
power cord to the floor without unwinding  
it from the cord hooks (Fig. 1).  
• When storing the vacuum cleaner turn the  
Quick Release Upper Cord Hook to the  
upright position and wrap the power cord  
around the cord storage hooks.  
Fig. 1  
Reclining the Handle  
• Press the Handle Release Pedal with your  
foot to recline the handle (Fig. 2).  
Fig. 2  
Turning the Vacuum On/Off  
• To turn the vacuum cleaner on, press the  
On/Off Switch located on the handle  
to the “On” position (Fig. 3).  
Off  
F F O  
On  
O N  
• To stop the vacuum cleaner, press the  
On/Off switch to the “Off” position.  
• Always turn the vacuum cleaner off before  
unplugging it from the electrical outlet.  
Fig. 3  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7
oPeRAtIon  
Using the Carpet/Floor Selector  
(models R20D, R20P and R20UP)  
To Vacuum Carpet:  
CARPET  
For carpet cleaning, slide the  
Carpet/Floor Selector toward the  
back of the nozzle so that it reads  
“Carpet” (Fig. 1).  
Carpet  
To Vacuum Hard Surfaces and  
Use Tools:  
Fig. 1  
For cleaning bare floors or using tools, slide  
the Carpet/Floor Selector toward the front  
of the nozzle so that it reads “Floor & Tools”.  
This prevents the brushroll from spinning and  
potentially damaging your floor (Fig. 2).  
FLOOR &  
TOOLS  
Edge Cleaning  
The edge cleaning feature provides improved  
cleaning of carpets near walls and stationary  
furniture. For maximum edge cleaning, place  
the right side of the nozzle against the wall  
or furniture.  
Floor & Tools  
Fig. 2  
Automatic Carpet Height Adjustment  
Your vacuum cleaner is designed with an  
automatic self-adjusting nozzle. No manual  
adjustments are required. The height of the  
nozzle automatically adjusts to the carpet  
pile height. This self-adjusting feature allows  
the nozzle to float evenly over all carpet  
pile surfaces.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
8
oPeRAtIon  
Vacuuming Under Furniture  
Your vacuum will lie flat on the floor for  
effective cleaning under beds and tables.  
• Press the Handle Release Pedal once  
for normal vacuuming (Fig. 1).  
• Press the Handle Release Pedal a  
second time to enable the vacuum to  
lie flat on the floor (Fig. 2).  
Fig. 1  
Fig. 2  
Carrying the Vacuum  
To safely transport your vacuum, especially  
when carrying the vacuum up and down  
stairs, use the Carrying Handle located at the  
top of the bag compartment behind the bag  
compartment cover (Fig. 3).  
Fig. 3  
Download from Www.Somanuals.com. All Manuals Search And Download.  
9
AttACHMent CleAnInG  
Your vacuum is a comprehensive cleaning  
system equipped with an upholstery tool,  
dusting brush, crevice tool, telescopic wand  
and a stretch hose.  
Wand Cleaning  
• Remove the Telescopic Wand from the  
body of the vacuum by pulling it up and  
out of the holder.  
• Extend the wand by sliding the Wand  
Extension Button forward while extending  
the wand to desired length.  
• Attach any of the tools to the end of the  
Telescopic Wand.  
• When finished with wand cleaning, insert the  
wand back into the vacuum and secure it by  
pushing the curved handle into the holder.  
Adjusting the Suction Power for  
Tool Cleaning  
Full suction power may be too strong for  
some cleaning situations. For example,  
reduced suction power would be  
appropriate for cleaning sheer curtains.  
• On the back of the vacuum, locate the  
Suction Control Dial and turn it to the  
desired position. This reduces the suction  
power coming through the hose. Close  
the Suction Control Dial when finished to  
restore full suction power.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
10  
AttACHMent CleAnInG  
Cleaning Tools  
Your vacuum is equipped with a dusting brush,  
upholstery brush and crevice tool.  
• Turn the Carpet/Floor Selector on the nozzle  
to the “Floor & Tools” position (models R20D,  
R20P and R20UP only) and remove the  
cleaning wand from the vacuum.  
• Insert any of the tools onto the end  
of the wand.  
Wand with Dusting Brush  
Dusting Brush  
Ideal for table tops, shelves, blinds or  
hard surface floors.  
Upholstery Tool  
Remove the dusting brush clip for  
upholstery cleaning. Ideal for soft surfaces  
like chairs and couches.  
Crevice Tool  
Ideal for tight places like between seat  
cushions or corners.  
Dusting Brush  
Dusting  
Brush Clip  
Upholstery Tool/Dusting Brush  
Crevice Tool  
Download from Www.Somanuals.com. All Manuals Search And Download.  
11  
MAIntenAnCe AnD CARe  
Annual Checkup  
To keep your vacuum in peak operating  
condition, it is recommended you bring your  
vacuum to an Authorized Riccar Retailer for  
an annual checkup. Your retailer will conduct  
a comprehensive examination to ensure  
your vacuum is in top operating condition.  
Power Cord Care  
• If cord or plug has any apparent damage,  
refrain from using the vacuum. Please visit an  
Authorized Riccar Retailer for a new cord  
or plug.  
• When vacuum is in use, hold the cord to  
keep from running over it.  
• Avoid obstructions and do not pull cord  
around sharp edges or corners.  
• Always keep cord away from heated  
surfaces and never close doors on it as  
this may cause damage to the wiring.  
• To unplug, always grasp the plug, not  
the cord.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
12  
MAIntenAnCe AnD CARe  
When to Change the Vacuum Bag  
(models R20D, R20P and R20UP)  
The Full Bag Indicator Light is designed to  
show when the bag is full or when there is  
a clog in the vacuum.  
The system measures airflow and alerts the  
user when airflow is significantly reduced –  
most commonly from a full bag or a clog.  
The light could also come on when  
vacuuming fine powders such as flour or  
drywall dust. These materials can quickly  
block the bag pores, significantly reducing  
airflow before the bag is actually full. The  
vacuum bag should still be changed.  
The light may also come on during  
attachment cleaning. If the light goes off  
when attachments are no longer in use, the  
vacuum bag does not need to be changed.  
For model R20S:  
To maintain optimal performance change  
your vacuum bag once a month or when the  
bag is two-thirds full.  
NOTE: The vacuum bags are disposable  
and intended to only be used once. Do not  
attempt to reuse the bag as suction and  
filtration performance will be greatly reduced.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
13  
MAIntenAnCe AnD CARe  
Replacing the Vacuum Bag  
NOTE: Unplug the vacuum cleaner from the  
electrical outlet before changing the bag.  
• Open the bag compartment by lifting  
up the latch on the bag compartment cover.  
• Remove the used vacuum bag by pulling  
the red bag collar tab away from the  
vacuum (Fig. 1). Slide the used bag out of  
the holder which automatically seals the  
bag (Fig 2). Discard the used bag.  
Fig. 1  
• To install a new bag, slide the bottom of  
the red bag collar into the bag holder until  
it “snaps” into place (Fig. 3).  
• Push the top of the bag collar upward until  
the bag holder “snaps” into place on the  
vacuum (Fig. 4).  
• Tuck the bag corners into the bag  
compartment before replacing the bag  
compartment cover.  
• Replace the bag compartment cover.  
Fig. 2  
Fig. 3  
Fig. 4  
Download from Www.Somanuals.com. All Manuals Search And Download.  
14  
MAIntenAnCe AnD CARe  
When to Change the Filters  
At minimum, it’s recommended to replace  
the filters once a year or after using 12  
vacuum bags, whichever comes first.  
If someone in your household is  
sensitive to airborne allergens, it is  
recommended to change the filters  
after every six vacuum bags.  
Replacing the HEPA Media or  
Foam Filter  
Depending on the model, your vacuum is  
equipped with either a HEPA media filter or  
a foam filter.  
NOTE: Unplug the vacuum cleaner from the  
electrical outlet before changing the filters.  
• Remove the bag compartment cover.  
• Locate the filter on the front of the vacuum.  
• Remove the used filter and throw away.  
Filters cannot be washed and reused.  
• Press a new filter into place on the front  
of the vacuum.  
• Replace the bag compartment cover.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
15  
MAIntenAnCe AnD CARe  
Replacing the Electrostatic  
Secondary Filter  
NOTE: Unplug the vacuum cleaner from the  
electrical outlet before changing the filters.  
The electrostatic secondary filter protects  
the motor from dust and dirt. Before  
installing a new vacuum bag, check the filter.  
Accumulated dirt in the bag compartment  
will be collected on this filter and may  
restrict motor performance when the filter  
becomes dirty.  
• Remove the bag compartment cover.  
• Locate the secondary filter on the bottom  
of the bag compartment.  
• Slide the used secondary filter out from  
under the bag support.  
• Insert a new filter by sliding it under  
the bag support.  
• Replace the bag compartment cover.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
16  
MAIntenAnCe AnD CARe  
Jammed Brushroll  
(Models R20P and R20UP)  
CAUTION! To Reduce the Risk of Injury From  
Moving Parts, Unplug Before Servicing.  
If an object, such as a throw rug or  
article of clothing is ever picked up into  
your vacuum, the vacuum will sense this  
Jammed Brushroll condition and turn off  
the brushroll. When this happens, the  
Brushroll Warning light on the top of the  
nozzle will light up in red.  
Brushroll  
Red Warning Light Indicates a  
Jammed Brushroll Condition  
• Turn off the vacuum.  
• Remove the cause of the jam.  
• Turn the vacuum back on.  
• If the brushroll is free of any object and  
the Brushroll Warning light is still lit, please  
take it to an Authorized Riccar Retailer for  
service.  
Lifetime Belt  
(models R20P and R20UP)  
Your vacuum belt is covered with a lifetime  
warranty. Should the vacuum belt break,  
simply bring your vacuum to your Authorized  
Riccar Retailer for a free replacement.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
17  
MAIntenAnCe AnD CARe  
Removing and Reinstalling the  
Bottom Plate  
WARNING! To Reduce the Risk of Electrical  
Shock or Injury From Moving Parts, Unplug  
Before Servicing or Cleaning.  
• Press the handle release pedal twice and place  
the vacuum cleaner in the flat position.  
• Turn the vacuum cleaner over, exposing the  
bottom plate.  
• Slide the two locking latches toward the center.  
• Press the tabs inward on each side and  
remove the bottom plate.  
• Reinstall by placing the lower edge of the  
bottom plate along the lower edge of the  
nozzle. Snap the bottom plate into place. Slide  
the locking latches to the outside edges.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
18  
MAIntenAnCe AnD CARe  
Unclogging the Nozzle and Hose  
WARNING! To Reduce the Risk of Electrical  
Shock or Injury From Moving Parts, Unplug  
Before Servicing or Cleaning.  
The hose located on the back of the vacuum  
carries the dirt from the nozzle to the  
vacuum bag. The hose also functions as the  
attachment cleaning hose. First check to see  
that a bag is properly installed.  
Fig. 1  
If the Hose Becomes Clogged  
There are three areas to check if you  
suspect a clog in the hose:  
Inlet Tube  
Suction Dial  
• Turn the Suction Dial to the open position.  
Remove the clog or blockage (Fig. 1).  
Nozzle Inlet Tube  
• Turn the vacuum over and remove the  
bottom plate (See page 18). Check the  
nozzle inlet tube for obstructions (Fig. 2).  
Clear the tube and reinstall the bottom plate.  
Fig. 2  
Screw  
Nozzle Hose  
• Turn the vacuum over and remove the  
bottom plate (See page 18). Remove one  
screw at the base of the nozzle hose (Fig. 3).  
Clear the hose of blockage and replace the  
screw. Reinstall the bottom plate.  
Fig. 3  
Download from Www.Somanuals.com. All Manuals Search And Download.  
19  
MAIntenAnCe AnD CARe  
Thermal Motor Protection  
Thermal Reset  
1. Unplug machine 3. Correct problem  
2. Locate problem 4. Press reset button  
source (clogged If problem persists,  
WARNING! To Reduce the Risk of Electrical  
Shock or Injury From Moving Parts, Unplug Before  
Servicing or Cleaning.  
consult owner’s manual  
or contact retailer.  
hose or full bag)  
Your vacuum is equipped with a safeguard to  
recognize when the vacuum might overheat and  
shuts off. Common reasons why a vacuum may  
overheat include operating the vacuum with a  
full bag or when there is a clog in the vacuum.  
Check the headlight to verify that your vacuum  
shut off due to the thermal motor protection.  
If when the vacuum is turned on, the motor is  
off, but the headlight is on then the thermal  
motor protection system did shut off the vacuum.  
If both the motor and the headlight are off,  
then your vacuum is not working for some  
other reason, like a pulled plug for example.  
If the Thermal Motor Protection System shuts  
off your vacuum, follow these steps:  
• Unplug the vacuum.  
• Inspect the vacuum for a full bag condition  
or a hose clog and correct the problem.  
• Locate the Thermal Motor Protection Reset  
Button on the back of the vacuum. Press the  
button and resume vacuuming.  
If problem continues, contact your Authorized  
Riccar Retailer.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
20  
PRoBleM solVInG GUIDe  
Troubleshooting  
WARNING! To Reduce the Risk of Electrical Shock or Injury From Moving Parts, Unplug  
Before Servicing or Cleaning.  
CAUTION! To reduce the risk of electric shock, do not handle plug or appliance with wet hands.  
PROBLEM  
POSSIBLE REASON  
POSSIBLE SOLUTION  
Vacuum won’t turn on  
• Power cord not firmly  
plugged in  
• Plug unit in firmly.  
• Blown fuse or tripped  
breaker  
• Check house fuse or  
breaker. Replace fuse /  
reset breaker.  
• Take to an Authorized  
Riccar Retailer  
• Needs service  
Vacuum won’t pick up or  
low suction  
• Vacuum bag full  
• Clogged filter  
• Hose clogged  
• Worn brushes  
• Replace bag.  
• Replace filters.  
• Remove obstacle.  
• Replace brush strips.  
• Bag compartment cover  
is not installed properly.  
• Filters not installed  
correctly  
• Attach the bag  
Dust escaping from  
vacuum  
compartment cover.  
• Review filter installation  
(pages 15-16).  
Any other service should be performed by an Authorized Riccar Retailer.  
To locate your nearest Authorized Riccar Retailer, visit our website  
at www.Riccar.com or call 888-6-RICCAR.  
Key Replacement Parts  
Genuine HEPA Media Vacuum Bags: RMH-6  
Genuine Vacuum Belts: R20B-2 (models R20S and R20D)  
Genuine Filters: RF20UP (model R20UP)  
RF20DP (models R20D and R20P)  
RF20S (model R20S)  
For Best Performance  
• Keep your vacuum clean and in good operating condition.  
• Change vacuum bags once a month or when the full bag light is illuminated to maximize  
cleaning performance.  
• Always use genuine Riccar vacuum bags and replacement parts. Use of other products may  
result in poor cleaning performance, potential vacuum cleaner damage and may void vacuum  
warranty. Genuine products are designed for maximum cleaning performance.  
• Have your vacuum checked annually by your Authorized Riccar Retailer.  
• Store your vacuum carefully in a dry area.  
• For optimum cleaning performance and safety, follow your owner’s manual instructions.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
21  
WARRAntY  
What is Covered:  
This warranty covers any defects in material and workmanship in your new Riccar  
vacuum and applies exclusively to the original purchaser.  
How Long Coverage Lasts:  
Warranty coverage lasts five years for the R20P and R20UP models. Warranty coverage  
lasts four years for the R20S and R20D models. Household models used commercially are  
only warranted for 90 days.  
What is Not Covered:  
• Damage to the vacuum which occurs from neglect, abuse, alterations, accident,  
misuse or improper maintenance.  
• Normal replacement items: disposable bags, disposable filters, light bulbs, belts (models  
R20S and R20D) and agitator brushes.  
What We Will Do:  
This warranty provides, at no cost to you, all labor and parts to keep this vacuum in  
correct operating condition during the warranted period.  
How to Get Service:  
Warranty service can only be obtained by presenting the vacuum to an Authorized Riccar  
Retailer. A proof-of-purchase and product serial number will be required before service  
is rendered. To locate your nearest service center, please call 888-6-RICCAR or visit  
THIS WARRANTY IS EXCLUSIVE AND IN LIEU OF ANY AND ALL OTHER WARRANTIES  
WHETHER WRITTEN, ORAL, EXPRESSED OR IMPLIED, (INCLUDING ANY WARRANTY  
OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE). THIS WARRANTY  
DISCLAIMS LIABILITY FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES.  
How State Law Applies:  
This warranty gives you specific legal rights, and you may also have other rights which  
vary from state to state.  
Register your warranty online at www.Riccar.com  
Download from Www.Somanuals.com. All Manuals Search And Download.  
22  
oWneR’s WARRAntY InFoRMAtIon  
keep this for your records…  
Date of purchase  
Serial number  
Model number  
Purchased from:  
Store name  
Address  
City, State, Zip  
Telephone  
Download from Www.Somanuals.com. All Manuals Search And Download.  
23  
notes  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
©2014 Tacony Corporation  
Download from Www.Somanuals.com. All Manuals Search And Download.  
B503-7002 1.14  

QSC Audio Stereo Amplifier SA 1350 User Guide
Raritan Computer Universal Remote PCR8 User Guide
Razor Wheelchair 13010800 User Guide
RF Link Technology Model Vehicle Network Communications Module User Guide
Ryobi Grinder AG402 User Guide
Samson Musical Instrument PL2404 User Guide
Samsung Home Theater System HT F5500W User Guide
Savin Printer AC205 User Guide
Scotsman Ice Air Cleaner C1448 User Guide
Sears Water System 62534844 User Guide