by
RSBH-O, RSBH-C, RSBH-SB
RSBHP-O & RSBHP-C
O w n e r ’ s M a n u a l
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
IMPORTANT SAFETY INSTRUCTIONS ..............................................................
3
4
4
5
6
Safety Features ..................................................................................................
Polarization Instructions......................................................................................
Benefits..............................................................................................................
Description of the Zone Heater...........................................................................
Operation
Unpacking..........................................................................................................
Turning the Power On.........................................................................................
Turning the Power Off.........................................................................................
8
8
9
Setting the Temperature ..................................................................................... 10
Setting the Clock and Day ................................................................................. 11
Backlight Function.............................................................................................. 12
Modes of Operation ........................................................................................... 13
Error Messages .................................................................................................. 15
Resetting the Circuit Breaker.............................................................................. 15
Maintenance and Care
Caring and Storing ............................................................................................. 16
Suggestions for Best Performance..................................................................... 16
Filter Maintenance .............................................................................................. 17
Problem Solving Guide
Frequently Asked Questions............................................................................... 18
Troubleshooting.................................................................................................. 19
How to Contact your Authorized Retailer............................................................ 19
Visit Riccar On-line ............................................................................................. 19
Warranty ................................................................................................................. 20
Owner’s Warranty Information .......................................................................... 21
Download from Www.Somanuals.com. All Manuals Search And Download.
1
IMPORTANT SAFETY INSTRUCTIONS
When using an electrical appliance, basic precautions should always be followed, including
the following:
READ ALL INSTRUCTIONS BEFORE
USING THIS APPLIANCE
The manufacturer cannot accept responsibility for damage
caused when the appliance is not used according to the
instructions, or for uses other than those for which it
was intended.
WARNING:
To reduce the risk of fire, electric shock or injury:
• DO NOT plug the heater into any other cord
connected device such as a power strip, surge
protector, multiple outlet adapter, grounding
adapter, outlet-type air fresheners or extension
cords. Plug into a 3-prong, 120V 15 amp or
higher grounded circuit receptacle only.
• DO NOT plug the heater into a loose fitting or
broken receptacle.
• DO NOT alter the heater’s design or you will
void the warranty.
• DO NOT block the front or rear of the heater.
• DO NOT place anything directly in front of the
heater.
• This heater is hot when in use. To avoid burns,
do not let bare skin touch hot surfaces.
• Always unplug this heater when it is not in use.
To disconnect the heater, turn controls to off
then remove plug from the outlet.
• To prevent a possible fire, do not block air
intakes or exhaust in any manner. Do not use
on soft surfaces, like a bed where openings
may become blocked.
• Keep combustible materials such as furniture,
pillows, bedding, clothes, curtains and paper
at least 3 feet from the front of the heater and
keep them away from the sides and the rear.
• Use this heater only as described in this
manual. Any other use not recommended by
the manufacturer may cause fire, electrical
shock or injury to persons.
• DO NOT cover the unit as this may block airflow
and cause the heater to malfunction.
• DO NOT use the heater outdoors or in
construction sites.
• DO NOT force the filter to dry using any
alternative methods when performing filter
maintenance, doing so could damage the filter.
• DO NOT run the power cord under carpeting.
• DO NOT cover the power cord with throw rugs,
runners or similar coverings. Arrange the cord
away from traffic areas and where it will not be
tripped over.
• DO NOT insert or allow foreign objects to enter
any ventilation or exhaust opening as this may
cause an electric shock or fire, or damage the
heater.
• DO NOT operate this heater with a damaged
cord or plug or after the heater malfunctions,
has been dropped or damaged in any
manner. Return heater to an authorized retailer
for examination, electrical or mechanical
adjustment or repair.
• Avoid the use of an extension cord because the
extension cord may overheat and cause a risk
of fire.
• This heater is for use on 120 volt grounded
outlets. An adapter should not be used.
• This heater must be located near a socket
outlet.
• Extreme caution is necessary when any
heater is used by or near children or invalids
and whenever the heater is left operating and
unattended.
• This heater is not intended for use in
bathrooms, laundry areas and similar indoor
locations. Never locate the heater where it may
fall into a bathtub, shower, swimming pool or
other water container.
• Connect to properly grounded outlets only.
• DO NOT use this heater in areas where
gasoline, paint or flammable liquids are used or
stored. A heater has hot or arcing parts inside.
SAVE THESE INSTRUCTIONS.
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Safety Features
Benefits
Safety Features
Energy Savings
The Riccar SummerBreeze Heater has safeguards to protect the heater from overheating.
Here are a few ways the heater warms your home safely:
• The Riccar SummerBreeze Zone Heater reduces energy usage and cost by allowing you to
set your central heating system to a lower temperature and use zone controlled heating to
only heat the area you’re occupying.
• Enclosed heating element prevents the heat from creating hot external areas.
• Thermal fuses shut the element off if dangerously high temperatures are reached.
• Tip-over switch shuts off the element if the heater is tilted. The power resets when the
heater is returned to operating position.
• The Riccar SummerBreeze Zone Heater uses a heating element with a finned design that
creates more internal surface area to be heated. As air passes over the element, it is more
effective at heating the air.
• Circuit breaker protects against potential electrical safety conditions.
Ease to Use, Easy to Maintain
• The dial and programmable thermostats are easy to use.
• Minimal maintenance is required. Just vacuum or wash the filter and replace as needed.
• No bulbs to replace.
Polarization Instructions
Comfort
This heater must be grounded. If it should
The SummerBreeze Zone Heater by Riccar features a unique design that creates even heat
distribution – so your toes are as warm as your nose.
malfunction or break down, grounding provides
a path of least resistance for the electric current
to reduce the risk of electric shock. This heater
is equipped with a cord having an equipment-
grounding conductor and grounding plug.
Grounded
Outlet
• High airflow allows uniform air distribution – something space heaters and radiant heaters
can’t do.
• Quiet operation adds to your room’s ambience.
Grounded
Outlet Box
Grounding
The plug must be plugged into an appropriate
outlet that is properly installed and grounded in
accordance with all local codes and ordinances.
Beauty
The Riccar SummerBreeze Zone Heater isn’t just functional, it’s also beautiful. The rich wood
finish blends in with your décor and complements your room.
• Made with a solid wood top and legs and veneer core hardwood panels.
• Requires only furniture polish or a quick dusting with a Riccar Microfiber Cloth to keep
its rich finish.
This heater is for use on a 120-volt circuit and has a ground plug
(see illustration). Make sure the heater is connected to an outlet having the same
configuration as the plug. No adapter should be used with this heater.
WARNING: Improper connection of the equipment-grounding conductor can result in
the risk of electric shock. Check with a qualified electrician or service person if you are in
doubt as to whether the outlet is properly grounded. Do not modify the plug provided with
the heater – if it will not fit the outlet, have a proper outlet installed by a qualified electrician.
Download from Www.Somanuals.com. All Manuals Search And Download.
4
5
Description of the Zone Heater
Description of the Zone Heater
Back Side
RSBH-O, RSBH-C
and RSBH-SB Models
Dial Thermostat
RSBH-O, RSBH-C
and RSBH-SB Models
Front Side
1
7
F°
F°
Programmable Thermostat
RSBHP-O and
8
RSBHP-C Models
Time and day display
Temperature display
Mode Display
On/Standby switch
Back Side
RSBHP-O and
RSBHP-C Models
Appears when the
setpoint is displayed
1
2
3
4
5
6
7
8
Power On Indicator Light
Front Grill (exhaust)
Caster Wheels
Preset temperature
indicator
Day and time settings
8
Temperature control
mode indicator
On/Off Switch
Percentage of
heating time
Circuit Breaker Button
Filter (intake)
Temperature preset
buttons
Program button
Period Display
Dial Temperature Control
Program clear button
Temperature
Programmable
adjustment buttons
Temperature Control
Mode selection/
Program exit
Backlight button
7
Download from Www.Somanuals.com. All Manuals Search And Download.
6
Operation
Operation
On/Off Switch
Unpacking Your SummerBreeze Zone Heater
• Cut open the taped edges, remove the
protective packaging materials and lift heater
from carton. Find a level location to place the
unpackaged heater.
Turning the Power On
Programmable Thermostat Models
• Press the on/off switch on the back of the
heater to On. An amber light will display on
the front of the unit indicating the heater is
plugged into an electrical outlet and turned
on.
• Keep the packaging for off-season storage and
any transporting needs.
• Slide the on/standby switch on the
thermostat to On. It is not necessary to
ever set the thermostat to Standby because
the master on/off switch on the heater
controls the power to the heating element.
• Set the desired temperature using the up/
down temperature adjustment buttons.
See Setting the Temperature (page 10) for
complete instructions.
• Plug the power cord directly into an unused,
grounded 120 volt, 15 amps or higher circuit
receptacle.
On/Off Switch
Turning the Power On
Dial Thermostat Models
• If the thermostat is set above the room’s
temperature the heater fan will begin to
operate after a few minutes.
• Press the on/off switch to On. An amber light
will display on the front of the unit indicating the
heater is plugged into an electrical outlet and
turned on.
Programmable Thermostat
F°
• Turn the thermostat dial to set the desired
temperature.
Turning the Power Off
All Models
• If the thermostat is set above the room’s
temperature the heater fan will begin to
operate after a few minutes.
• Press the on/off switch on the back of the
heater to Off.
Dial Thermostat
Download from Www.Somanuals.com. All Manuals Search And Download.
8
9
Operation
Operation
Setting the Clock and Day
Programmable Thermostat Models
Setting the Temperature
Dial Thermostat Models
• Press the Hour button to set the hour.
• Set the Min button to set the minutes.
• Set the Day button to set the day.
• Press Mode/Ret to exit.
• Turn the dial to the desired temperature.
• If the room’s temperature is below the
temperature selected on the thermostat
dial, the heater will turn on until the desired
temperature is reached.
• If the room’s temperature is above the
temperature selected on the thermostat dial,
the heater will not turn on. Once the room’s
temperature falls below the temperature
selected on the thermostat dial, the heater will
turn on.
F°
Daylight Savings Time
The thermostat can automatically re-adjust its clock
at the Daylight Savings Time changeover. When this
function is enabled (On), the thermostat switches
to Daylight Savings Time on the second Sunday
of March and to normal time on the first Sunday of
November.
Dial Thermostat
NOTE: The function is disabled (default setting) when
the clock loses its setting.
• Press the Day button (3 seconds) until DLS appears
on the screen.
Setting the Temperature
Programmable Thermostat Models
The thermostat normally displays the room’s
actual (measured) temperature.
• Press the up/down button to toggle between On
(enabled) and Off (disabled).
• To view the setpoint, press one of the up/down
buttons once. The setpoint will appear for the
next 5 seconds.
• Press the Day button briefly. The year setting is
displayed.
• Press the up/down button to set the current year.
• Press the Day button briefly. The month setting is
displayed.
• To change the setpoint, press one of the up/
down buttons until the desired temperature is
displayed. To scroll faster, press and hold the
button.
• Press the up/down button to set the current month.
• Press the Day button briefly. The date setting is
displayed.
.
• Press the up/down button to set the current date.
• Press Mode/Ret to exit.
Programmable Thermostat
Download from Www.Somanuals.com. All Manuals Search And Download.
10
11
Operation
Operation
Modes of Operation
Programmable Thermostat Models
Backlight
Programmable Thermostat Models
Automatic Mode
The display illuminates for 12 seconds when the
backlight button is pressed.
The thermostat follows the programmed schedule. To
place the thermostat in this mode, press Mode/Ret
until
is displayed. The data of the current schedule
When either of the up/down buttons are pressed, the
display also illuminates for 12 seconds. The setpoint
temperature appears for 5 seconds, then the actual
(measured) temperature is displayed.
period are also displayed.
Temporary Bypass
If you modify the setpoint temperature (by pressing the
up/down arrows,
automatic mode, the new temperature will be used until
the beginning of the next period. flashes during the
or button) when the thermostat is in
Temperature Adjustment
Programmable Thermostat Models
Setpoint Temperature
The thermostat has 3 preset temperatures:
• Comfort temperature
bypass. You can cancel the bypass by pressing Mode/Ret.
Comfort
Economy
Vacation
• Economy temperature
Programmed Schedule
• Vacation temperature
The schedule consists of 4 periods per day which
represents a typical week day. You can program the
thermostat to skip the periods that do not apply to your
situation. For example, you can skip periods 2 and 3 for
the weekend.
To use a preset temperature, press the corresponding
button. The corresponding icon will be displayed.
Preset Temperatures
To store a preset temperature:
• Set the desired temperature using the
up/down buttons.
• Press and hold the corresponding button until the
corresponding icon is displayed.
The Comfort ( ) temperature is used in periods 1 and 3
and the Economy ( ) temperature is used in periods 2
and 4. For example,when the period changes from 1 to 2,
the setpoint automatically changes from Comfort (
temperature to Economy ( ) temperature.
)
Download from Www.Somanuals.com. All Manuals Search And Download.
12
13
Operation
Operation
Vacation Mode
Programmed Schedule Continued
In this mode, the thermostat is set to Vacation temperature. To
place the thermostat in Vacation mode:
You can have a different program for each day of the week; i.e., each
period can start at a different time for each day of the week. The
thermostat has been programmed with the following schedule.
• Press the
button on the thermostat. When the Vacation mode
is activated using the button, the
icon appears on the screen
without flashing.
Error Messages
The measured temperature is below
the thermostat’s display range. Heating is activated.
To modify the schedule:
• Press Pgm to access the programming mode. Period 1 is selected.
• Press Day to select the day to program (hold for 3 seconds to select
the entire week).
The measured temperature is above the
thermostat’s display range. Heating is deactivated.
• Press Hour and Min to set the start time of the selected period, or
press Clear if you want to skip the period (--:-- is displayed). NOTE: If
you intend to use only 2 periods, set periods “1 and 4” or periods “2
and 3”. Early Start will not work if you set periods “1 and 2” or periods
“3 and 4” .
Verify the thermostat connection.
Resetting the Circuit Breaker
Circuit Breaker
This feature is a safeguard to recognize when
there is a potential electrical safety condition.
The circuit breaker will “trip” or pop out and
the heater will automatically power off if such
a situation occurs.
• Press Pgm to select another period, or press Day to select another
day. Then repeat step 3.
• Press Mode/Ret to exit the programming mode.
NOTE: If no button is pressed for 60 seconds, the thermostat will
• Press the on/off switch to Off.
automatically exit the programming mode.
• Unplug the power cord.
• Push the circuit breaker button to reset.
• Plug the power cord directly into an unused,
grounded 120 volt, 15 amps or higher
circuit receptacle.
Manual Mode
The programmed schedule is not used. The temperature must be set
manually. To place the thermostat in this mode:
• Press Mode/Ret until is displayed.
• Press the on/off switch to On.
• Set the temperature using the up/down,
or button.
• If the circuit breaker trips a second time, return
the heater to an Authorized Riccar Retailer.
Download from Www.Somanuals.com. All Manuals Search And Download.
14
15
Maintenance and Care
Maintenance and Care
Caring For Your SummerBreeze Zone Heater Cabinet
Filter Maintenance
Clean the filter often for maximum performance (see filter maintenance, page 11). When
necessary, wipe the cabinet clean with a soft cloth and/or furniture polish.
The only maintenance required for this zone
heater is the periodic cleaning of the filter
(located at the back of the unit). Vacuum
or wash the filter at least once a month, or
as dust becomes visible to ensure efficient
operation of the heater.
Storing Your SummerBreeze Zone Heater
When the heater is not being used for an extended period of time, follow these steps to
extend the life and performance of the heater unit:
• Unplug the heater.
F°
• Cover the heater to prevent dust from accumulating on or inside the unit.
• Store heater in a dry, low dust environment.
• Turn the power off by pressing the on/off
switch on the back of the heater to Off.
• Unplug the power cord from the
electrical outlet.
Note: Before resuming use of heater, ensure the filter and front grill are clean and clear of
dust and dirt. Inspect the power cord to ensure no damage has compromised the integrity
of the cord.
• Remove the filter by gently pulling it
straight out from the back of the heater.
• Clean the filter by vacuuming it until all
dust and dirt is removed.
Suggestions for Best Performance
• Replace the filter by gently positioning it
into the back of the heater.
Electrostatic Filter
• Set your central heating system to a lower temperature. Place the zone heater in the area
where you spend most of your time. Now set temperature on the zone heater to your
comfort level.
• If filter is extremely dirty, run warm tap
water over it until it is clean. Allow to dry
completely, before replacing the filter
back into the heater.
• When heating larger areas, place the zone heater in a central location.
• Do not locate the zone heater in an area with a high air exchange rate. Heat produced
should be contained in the room.
• Plug in the power cord and turn the
power switch on the back of the heater
to the on position.
• Place the zone heater near a warmer inside wall and direct the output toward a cooler
outside wall. The cooler outside wall will draw the generated heat toward it, which
allows more efficient heating.
• Placing the zone heater next to a cold air return will draw the heat away from the area to
be heated. Experiment with the placement of the heater to see what works best
for you.
• If the zone heater is used in an extremely dirty or dusty area, the filter should be cleaned
more often to maintain the heater performance (see Filter Maintenance,
page 11).
Download from Www.Somanuals.com. All Manuals Search And Download.
16
17
Problem Solving Guide
Problem Solving Guide
Troubleshooting
Problem
Possible Solution
Frequently Asked Questions
The zone heater’s airflow
has been reduced.
• Make sure the filter is clean.
Q: I turned the heater on, but nothing is happening yet.
A: Make sure the heater temperature is set above your room’s current temperature on the
thermostat dial. After 2 minutes the air inside the heater will be warm and the heater fan
will begin to operate.
• Check the back intake for any objects that could obstruct airflow.
• If the heater’s airflow is still diminished or has stopped, contact your
Riccar Authorized Retailer.
The zone heater stays on
after I turn the thermostat
down.
• This is a normal function of the heater. During this time, the heater is
cycling the remaining heat into the room and is cooling the heating ele-
ment down.
Q: Why is the heater still running after I turned down the thermostat?
A: You will hear the heater fan running after you have turned the thermostat down. This
allows the heater to cycle the remaining heat into the room and helps to cool down the
heating element which protects the unit’s components from overheating.
• Make sure the heater is plugged directly into an unused, grounded 120
volt, 15 amps or higher circuit receptacle.
The zone heater will not
turn on.
Q: Can I use the heater to heat multiple rooms at the same time?
A: The heating capability will depend on your floor plan, the insulation and the room size.
Ceiling fans will help circulate heat. Placing the heater in a central location will also help
move heat between rooms.
• Make sure the amber light displays on the front of the unit indicating
the heater is plugged into an electrical outlet, turned on and is receiving
power.
• Make sure the heater temperature is set above your room’s
current temperature
The circuit breaker
button popped out.
• Press the on/off switch to Off.
Q: Will my heater work in areas without insulation?
• Unplug the power cord.
A: The heater will work in garages, basements and unfinished rooms. However, bear in
mind the effectiveness of your heater depends on how well the area is sealed and
insulated. As with any heater, the better the walls, floor and ceiling are sealed and
insulated, the more effective the room will be heated.
• Push the circuit breaker button to reset.
• Plug the power cord directly into an unused, grounded 120 volt, 15
amps or higher circuit receptacle.
• Press the on/off switch to On.
• If the circuit breaker trips a second time, return the heater to an
Authorized Riccar Retailer.
Q: Can I use multiple heaters in an area?
A: Depending on the size of the area, you may wish to use multiple heaters. Multiple
heaters may be used. Your heater is rated 12 amps so each heater must plug into an
independent 15 amps or greater circuit.
The zone heater tipped
over on its side and shut
off, but the fan is still
running.
• This is a normal safeguard function of the heater. Return the heater to
its normal upright operating position and the power will resume.
The programmable
thermostat doesn’t light up. • Slide the On/Standby switch to On.
Any other service should be done by an Authorized Service Representative.
Service 1-888-6-RICCAR
Download from Www.Somanuals.com. All Manuals Search And Download.
18
19
Warranty
Owner’s Warranty Information
keep this for your records…
Five Year Comprehensive Warranty & Ten Year Warranty on the Heating Element.
What is Covered:
This warranty covers any defects in material and workmanship in your new Riccar
SummerBreeze Zone Heater.
Date of purchase
Serial number
Model number
How Long Coverage Lasts:
Warranty coverage for Riccar SummerBreeze Zone Heater models RSBH-O, RSBH-C,
RSBH-SB, RSBHP-O AND RSBHP-C lasts five years. In addition, the heating element is
warranted for 10 years.
What is Not Covered:
Damage to the heater which occurs from neglect, abuse, alterations, accident,
misuse or improper maintenance.
What Riccar Will Do:
This warranty provides, at no cost to you, all labor and parts to keep this heater in
correct operating condition during the warranted period.
Purchased from:
Store name
Address
How to Get Service:
Warranty service can only be obtained by presenting the heater to an Authorized
Riccar Retailer. A proof-of-purchase and product serial number will be required before
service is rendered. To locate your nearest Riccar Retailer, please call
City, State, Zip
Telephone
THIS WARRANTY IS EXCLUSIVE AND IN LIEU OF ANY AND ALL OTHER WARRANTIES
WHETHER WRITTEN, ORAL, EXPRESSED OR IMPLIED, (INCLUDING ANY WARRANTY
OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE). THIS WARRANTY
DISCLAIMS LIABILITY FOR INCIDENTAL, OR CONSEQUENTIAL DAMAGES.
How State Law Applies:
This warranty gives you specific legal rights, and you may also have other rights which
vary from state to state.
Register your warranty on-line at www.riccar.com
Download from Www.Somanuals.com. All Manuals Search And Download.
20
21
|