HD74HCT1G04
Inverter
REJ03D0193–0500Z
(Previous ADE-205-303C (Z))
Rev.5.00
Jan.28.2004
Description
The HD74HCT1G04 is high-speed CMOS inverter using silicon gate CMOS process. With CMOS low
power dissipation, it provides high-speed equivalent to LS–TTL series. The internal circuit of three stages
construction with buffer provides wide noise margin and stable output.
Features
•
•
•
The basic gate function is lined up as Renesas uni logic series.
Supplied on emboss taping for high-speed automatic mounting.
TTL compatible input level.
Supply voltage range : 4.5 to 5.5 V
Operating temperature range : –40 to +85°C
•
•
|IOH| = IOL = 2 mA (min)
Ordering Information
Part Name
Package Type
Package Code
Package
Abbreviation
Taping Abbreviation
(Quantity)
HD74HCT1G04CME CMPAK-5 pin
CMPAK-5V
CM
E (3,000 pcs/reel)
Rev.5.00, Jan.28.2004, page 1 of 7
Download from Www.Somanuals.com. All Manuals Search And Download.
HD74HCT1G04
Absolute Maximum Ratings
Item
Symbol
VCC
VI
Ratings
–0.5 to 7.0
–0.5 to VCC + 0.5
–0.5 to VCC + 0.5
±20
Unit Test Conditions
Supply voltage range
Input voltage range *1
Output voltage range *1, 2
Input clamp current
Output clamp current
V
V
VO
V
Output : H or L
VI < 0 or VI > VCC
VO < 0 or VO >VCC
VO = 0 to VCC
IIK
mA
mA
mA
mA
IOK
±20
Continuous output current IO
±25
Continuous current through ICC or IGND
VCC or GND
±25
Maximum power dissipation PT
at Ta = 25°C (in still air) *3
200
mW
Storage temperature
Notes:
Tstg
–65 to 150
°C
The absolute maximum ratings are values, which must not individually be exceeded, and
furthermore, no two of which may be realized at the same time.
1. The input and output voltage ratings may be exceeded if the input and output clamp-current
ratings are observed.
2. This value is limited to 5.5 V maximum.
3. The maximum package power dissipation was calculated using a junction temperature of 150°C.
Recommended Operating Conditions
Item
Symbol
VCC
VI
Min
4.5
0
Max
5.5
5.5
VCC
2
Unit
V
Test Conditions
Supply voltage range
Input voltage range
Output voltage range
Output current
V
VO
0
V
IOL
—
—
0
mA
VCC = 4.5 to 5.5 V
VCC = 4.5 to 5.5 V
VCC = 4.5 to 5.5 V
IOH
–2
Input rise / fall time
(0.3 V to 2.7 V)
tr, tf
500
ns
°C
Operating temperature
Ta
–40
85
Note: Unused or floating inputs must be held high or low.
Rev.5.00, Jan.28.2004, page 3 of 7
Download from Www.Somanuals.com. All Manuals Search And Download.
HD74HCT1G04
Electrical Characteristics
VCC
Ta = 25°C
Min Typ
Ta = –40 to 85°C
Item
Symbol (V)
Unit Test Conditions
Max Min
Max
Input voltage
VIH
4.5 to 2.0
5.5
—
—
2.0
—
V
VIL
4.5 to —
5.5
—
0.8
—
0.8
Output voltage VOH
VOL
4.5
4.5
4.5
4.5
5.5
5.5
4.4
4.5
—
4.4
4.13
—
—
V
VIN = VIL IOH = –20 µA
4.18 4.31
—
—
IOH = –2 mA
IN = VIH IOL = 20 µA
IOL = 2 mA
—
—
—
—
0.0
0.1
0.1
V
0.17 0.26
—
0.33
±1.0
10.0
Input current
IIN
—
—
±0.1
1.0
—
µA VIN = VCC or GND
Operating
current
ICC
—
µA VIN = VCC or GND
Quiescent
supply current
ICCT
5.5
—
—
2.0
—
2.9
mA One input VIN = 2.4 V,
other input VCC or GND
Rev.5.00, Jan.28.2004, page 4 of 7
Download from Www.Somanuals.com. All Manuals Search And Download.
HD74HCT1G04
Switching Characteristics
Ta = 25°C
Min
Item
Symbol
Unit
Test Conditions
Typ
Max
Output rise / fall time
tTLH
tTHL
—
6
10
ns
Test circuit
Propagation delay time tPLH
tPHL
—
—
7.5
10
12
17
ns
Test circuit
(CL = 15 pF, tr = tf = 6 ns, VCC = 5 V)
VCC Ta = 25°C
Symbol (V)
Ta = –40 to 85°C
Item
Unit Test Conditions
Min Typ Max Min
Max
Output rise / fall time
tTLH
tTHL
4.5
—
14
25
—
31
ns Test circuit
Propagation delay time tPLH
tPHL
4.5
4.5
—
—
—
—
—
11.2 16
16.4 27
—
—
—
—
20
31
5
ns Test circuit
Input capacitance
CIN
2.5
10
5
pF
pF
Equivalent capacitance CPD
(CL = 50 pF, tr = tf = 6 ns)
—
—
—
Note:
CPD is equivalent capacitance inside of the IC calculated from the operating current without load (see
test circuit). The average operating current without load is calculated according to the expression
below.
ICC (opr) = CPD • VCC • fIN + ICC
Rev.5.00, Jan.28.2004, page 5 of 7
Download from Www.Somanuals.com. All Manuals Search And Download.
HD74HCT1G04
Test Circuit
VCC
Output
Input
Pulse
generator
CL
50Ω
Note: 1. CL includes probe and jig capacitance.
• Waveforms
tr = 6 ns
tf = 6 ns
3 V
90%
90%
1.3 V
10%
1.3 V
10%
Input
GND
VOH
tTHL
tTLH
90%
90%
1.3 V
10%
1.3 V
10%
Output
VOL
tPHL
tPLH
Rev.5.00, Jan.28.2004, page 6 of 7
Download from Www.Somanuals.com. All Manuals Search And Download.
HD74HCT1G04
Package Dimensions
Unit: mm
1.3 ± 0.2
+ 0.1
– 0.05
(0.65)
(0.65)
0.15
0 – 0.1
5 – 0.2 ± 0.05
2.0 ± 0.2
Package Code
JEDEC
CMPAK–5V
—
JEITA
Mass (reference value)
Conforms
0.006 g
Rev.5.00, Jan.28.2004, page 7 of 7
Download from Www.Somanuals.com. All Manuals Search And Download.
Sales Strategic Planning Div. Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japan
Keep safety first in your circuit designs!
1. Renesas Technology Corp. puts the maximum effort into making semiconductor products better and more reliable, but there is always the possibility that trouble
may occur with them. Trouble with semiconductors may lead to personal injury, fire or property damage.
Remember to give due consideration to safety when making your circuit designs, with appropriate measures such as (i) placement of substitutive, auxiliary
circuits, (ii) use of nonflammable material or (iii) prevention against any malfunction or mishap.
Notes regarding these materials
1. These materials are intended as a reference to assist our customers in the selection of the Renesas Technology Corp. product best suited to the customer's
application; they do not convey any license under any intellectual property rights, or any other rights, belonging to Renesas Technology Corp. or a third party.
2. Renesas Technology Corp. assumes no responsibility for any damage, or infringement of any third-party's rights, originating in the use of any product data,
diagrams, charts, programs, algorithms, or circuit application examples contained in these materials.
3. All information contained in these materials, including product data, diagrams, charts, programs and algorithms represents information on products at the time of
publication of these materials, and are subject to change by Renesas Technology Corp. without notice due to product improvements or other reasons. It is
therefore recommended that customers contact Renesas Technology Corp. or an authorized Renesas Technology Corp. product distributor for the latest product
information before purchasing a product listed herein.
The information described here may contain technical inaccuracies or typographical errors.
Renesas Technology Corp. assumes no responsibility for any damage, liability, or other loss rising from these inaccuracies or errors.
Please also pay attention to information published by Renesas Technology Corp. by various means, including the Renesas Technology Corp. Semiconductor
home page (http://www.renesas.com).
4. When using any or all of the information contained in these materials, including product data, diagrams, charts, programs, and algorithms, please be sure to
evaluate all information as a total system before making a final decision on the applicability of the information and products. Renesas Technology Corp. assumes
no responsibility for any damage, liability or other loss resulting from the information contained herein.
5. Renesas Technology Corp. semiconductors are not designed or manufactured for use in a device or system that is used under circumstances in which human life
is potentially at stake. Please contact Renesas Technology Corp. or an authorized Renesas Technology Corp. product distributor when considering the use of a
product contained herein for any specific purposes, such as apparatus or systems for transportation, vehicular, medical, aerospace, nuclear, or undersea repeater
use.
6. The prior written approval of Renesas Technology Corp. is necessary to reprint or reproduce in whole or in part these materials.
7. If these products or technologies are subject to the Japanese export control restrictions, they must be exported under a license from the Japanese government and
cannot be imported into a country other than the approved destination.
Any diversion or reexport contrary to the export control laws and regulations of Japan and/or the country of destination is prohibited.
8. Please contact Renesas Technology Corp. for further details on these materials or the products contained therein.
RENESAS SALES OFFICES
Renesas Technology America, Inc.
450 Holger Way, San Jose, CA 95134-1368, U.S.A
Tel: <1> (408) 382-7500 Fax: <1> (408) 382-7501
Renesas Technology Europe Limited.
Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, United Kingdom
Tel: <44> (1628) 585 100, Fax: <44> (1628) 585 900
Renesas Technology Europe GmbH
Dornacher Str. 3, D-85622 Feldkirchen, Germany
Tel: <49> (89) 380 70 0, Fax: <49> (89) 929 30 11
Renesas Technology Hong Kong Ltd.
7/F., North Tower, World Finance Centre, Harbour City, Canton Road, Hong Kong
Tel: <852> 2265-6688, Fax: <852> 2375-6836
Renesas Technology Taiwan Co., Ltd.
FL 10, #99, Fu-Hsing N. Rd., Taipei, Taiwan
Tel: <886> (2) 2715-2888, Fax: <886> (2) 2713-2999
Renesas Technology (Shanghai) Co., Ltd.
26/F., Ruijin Building, No.205 Maoming Road (S), Shanghai 200020, China
Tel: <86> (21) 6472-1001, Fax: <86> (21) 6415-2952
Renesas Technology Singapore Pte. Ltd.
1, Harbour Front Avenue, #06-10, Keppel Bay Tower, Singapore 098632
Tel: <65> 6213-0200, Fax: <65> 6278-8001
© 2004. Renesas Technology Corp., All rights reserved. Printed in Japan.
Colophon .1.0
Download from Www.Somanuals.com. All Manuals Search And Download.
|